diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2024-09-17 10:41:21 +0200 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2024-09-17 10:41:21 +0200 |
| commit | 7b17f5ebd5fc5e9275eaa5af3d0771f2a7b01bbf (patch) | |
| tree | 80bb3d739e4419d04cc26d3da29eb642f3688d9f | |
| parent | 303ba85c60442ecdca77231f227126a83ba39bd3 (diff) | |
| parent | 168c3e0d443599dd370710243fbf5c815fad7890 (diff) | |
Merge tag 'soc-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"New SoC support for Broadcom bcm2712 (Raspberry Pi 5) and Renesas
R9A09G057 (RZ/V2H(P)) and Qualcomm Snapdragon 414 (MSM8929), all three
of these are variants of already supported chips, in particular the
last one is almost identical to MSM8939.
Lots of updates to Mediatek, ASpeed, Rockchips, Amlogic, Qualcomm,
STM32, NXP i.MX, Sophgo, TI K3, Renesas, Microchip at91, NVIDIA Tegra,
and T-HEAD.
The added Qualcomm platform support once again dominates the changes,
with seven phones and three laptops getting added in addition to many
new features on existing machines. The Snapdragon X1E support
specifically keeps improving.
The other new machines are:
- eight new machines using various 64-bit Rockchips SoCs, both on the
consumer/gaming side and developer boards
- three industrial boards with 64-bit i.MX, which is a very low
number for them.
- four more servers using a 32-bit Speed BMC
- three boards using STM32MP1 SoCs
- one new machine each using allwinner, amlogic, broadcom and renesas
chips"
* tag 'soc-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (672 commits)
arm64: dts: allwinner: h5: NanoPi NEO Plus2: Use regulators for pio
arm64: dts: mediatek: add audio support for mt8365-evk
arm64: dts: mediatek: add afe support for mt8365 SoC
arm64: dts: mediatek: mt8186-corsola: Disable DPI display interface
arm64: dts: mediatek: mt8186: Add svs node
arm64: dts: mediatek: mt8186: Add power domain for DPI
arm64: dts: mediatek: mt8195: Correct clock order for dp_intf*
arm64: dts: mt8183: add dpi node to mt8183
arm64: dts: allwinner: h5: NanoPi Neo Plus2: Fix regulators
arm64: dts: rockchip: add CAN0 and CAN1 interfaces to mecsbc board
arm64: dts: rockchip: add CAN-FD controller nodes to rk3568
arm64: dts: nuvoton: ma35d1: Add uart pinctrl settings
arm64: dts: nuvoton: ma35d1: Add pinctrl and gpio nodes
arm64: dts: nuvoton: Add syscon to the system-management node
ARM: dts: Fix undocumented LM75 compatible nodes
arm64: dts: toshiba: Fix pl011 and pl022 clocks
ARM: dts: stm32: Use SAI to generate bit and frame clock on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Switch bitclock/frame-master to flag on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Sort properties in audio endpoints on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Add MECIO1 and MECT1S board variants
...
705 files changed, 44615 insertions, 8722 deletions
diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml index 95113df178cc..2f92b8ab08fa 100644 --- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml +++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml @@ -79,6 +79,7 @@ properties: - aspeed,ast2600-evb-a1 - asus,x4tf-bmc - facebook,bletchley-bmc + - facebook,catalina-bmc - facebook,cloudripper-bmc - facebook,elbert-bmc - facebook,fuji-bmc @@ -86,7 +87,9 @@ properties: - facebook,harma-bmc - facebook,minerva-cmc - facebook,yosemite4-bmc + - ibm,blueridge-bmc - ibm,everest-bmc + - ibm,fuji-bmc - ibm,rainier-bmc - ibm,system1-bmc - ibm,tacoma-bmc diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 80747d79418a..b39a7e031177 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -809,19 +809,19 @@ properties: - const: kontron,sl-imx6ull # Kontron SL i.MX6ULL SoM - const: fsl,imx6ull - - description: TQ Systems TQMa6ULLx SoM on MBa6ULx board + - description: TQ-Systems TQMa6ULLx SoM on MBa6ULx board items: - enum: - - tq,imx6ull-tqma6ull2-mba6ulx - - const: tq,imx6ull-tqma6ull2 # MCIMX6Y2 + - tq,imx6ull-tqma6ull2-mba6ulx # TQMa6ULL socketable SoM with MCIMX6Y2 on MBa6ULx EVK + - const: tq,imx6ull-tqma6ull2 # TQMa6ULL socketable SoM with MCIMX6Y2 - const: fsl,imx6ull - - description: TQ Systems TQMa6ULLxL SoM on MBa6ULx[L] board + - description: TQ-Systems TQMa6ULLxL SoM on MBa6ULx[L] board items: - enum: - - tq,imx6ull-tqma6ull2l-mba6ulx # using LGA adapter - - tq,imx6ull-tqma6ull2l-mba6ulxl - - const: tq,imx6ull-tqma6ull2l # MCIMX6Y2, LGA SoM variant + - tq,imx6ull-tqma6ull2l-mba6ulx # TQMa6ULLxL LGA SoM with socketable Adapter on MBa6ULx EVK + - tq,imx6ull-tqma6ull2l-mba6ulxl # TQMa6ULLxL LGA SoM on MBa6ULxL gateway board + - const: tq,imx6ull-tqma6ull2l # TQMa6ULLxL LGA SoM with MCIMX6Y2 - const: fsl,imx6ull - description: Seeed Stuido i.MX6ULL SoM on dev boards @@ -939,8 +939,8 @@ properties: - fsl,imx8mm-ddr4-evk # i.MX8MM DDR4 EVK Board - fsl,imx8mm-evk # i.MX8MM EVK Board - fsl,imx8mm-evkb # i.MX8MM EVKB Board + - gateworks,imx8mm-gw75xx-0x # i.MX8MM Gateworks Board - gateworks,imx8mm-gw7904 - - gateworks,imx8mm-gw7905-0x # i.MX8MM Gateworks Board - gw,imx8mm-gw71xx-0x # i.MX8MM Gateworks Development Kit - gw,imx8mm-gw72xx-0x # i.MX8MM Gateworks Development Kit - gw,imx8mm-gw73xx-0x # i.MX8MM Gateworks Development Kit @@ -953,7 +953,6 @@ properties: - toradex,verdin-imx8mm # Verdin iMX8M Mini Modules - toradex,verdin-imx8mm-nonwifi # Verdin iMX8M Mini Modules without Wi-Fi / BT - toradex,verdin-imx8mm-wifi # Verdin iMX8M Mini Wi-Fi / BT Modules - - variscite,var-som-mx8mm # i.MX8MM Variscite VAR-SOM-MX8MM module - prt,prt8mm # i.MX8MM Protonic PRT8MM Board - const: fsl,imx8mm @@ -1082,7 +1081,7 @@ properties: - gateworks,imx8mp-gw72xx-2x # i.MX8MP Gateworks Board - gateworks,imx8mp-gw73xx-2x # i.MX8MP Gateworks Board - gateworks,imx8mp-gw74xx # i.MX8MP Gateworks Board - - gateworks,imx8mp-gw7905-2x # i.MX8MP Gateworks Board + - gateworks,imx8mp-gw75xx-2x # i.MX8MP Gateworks Board - skov,imx8mp-skov-revb-hdmi # SKOV i.MX8MP climate control without panel - skov,imx8mp-skov-revb-lt6 # SKOV i.MX8MP climate control with 7” panel - skov,imx8mp-skov-revb-mi1010ait-1cp1 # SKOV i.MX8MP climate control with 10.1" panel @@ -1168,6 +1167,12 @@ properties: - const: tq,imx8mp-tqma8mpql # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM - const: fsl,imx8mp + - description: Variscite VAR-SOM-MX8M Plus based boards + items: + - const: variscite,var-som-mx8mp-symphony + - const: variscite,var-som-mx8mp + - const: fsl,imx8mp + - description: i.MX8MQ based Boards items: - enum: @@ -1293,6 +1298,7 @@ properties: - enum: - fsl,imx93-9x9-qsb # i.MX93 9x9 QSB Board - fsl,imx93-11x11-evk # i.MX93 11x11 EVK Board + - fsl,imx93-14x14-evk # i.MX93 14x14 EVK Board - const: fsl,imx93 - description: i.MX95 based Boards @@ -1344,6 +1350,12 @@ properties: - const: variscite,var-som-mx93 - const: fsl,imx93 + - description: Kontron OSM-S i.MX93 SoM based boards + items: + - const: kontron,imx93-bl-osm-s # Kontron BL i.MX93 OSM-S board + - const: kontron,imx93-osm-s # Kontron OSM-S i.MX93 SoM + - const: fsl,imx93 + - description: Freescale Vybrid Platform Device Tree Bindings @@ -1523,6 +1535,12 @@ properties: - fsl,ls2080a-rdb - const: fsl,ls2080a + - description: LS2081A based Boards + items: + - enum: + - fsl,ls2081a-rdb + - const: fsl,ls2081a + - description: LS2088A based Boards items: - enum: diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index f08e13b61172..5cb54d69af0b 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -157,11 +157,18 @@ properties: - items: - enum: + - wingtech,wt82918hd + - const: qcom,msm8929 + + - items: + - enum: - huawei,kiwi - longcheer,l9100 - samsung,a7 - sony,kanuti-tulip - square,apq8039-t2 + - wingtech,wt82918 + - wingtech,wt82918hdhw39 - const: qcom,msm8939 - items: @@ -228,12 +235,15 @@ properties: - samsung,grandprimelte - samsung,gt510 - samsung,gt58 + - samsung,j3ltetw - samsung,j5 - samsung,j5x - samsung,rossa - samsung,serranove - thwc,uf896 - thwc,ufi001c + - wingtech,wt86518 + - wingtech,wt86528 - wingtech,wt88047 - yiming,uz801-v3 - const: qcom,msm8916 @@ -250,6 +260,7 @@ properties: - items: - enum: - lg,bullhead + - lg,h815 - microsoft,talkman - xiaomi,libra - const: qcom,msm8992 @@ -1040,8 +1051,16 @@ properties: - items: - enum: + - lenovo,thinkpad-t14s + - const: qcom,x1e78100 + - const: qcom,x1e80100 + + - items: + - enum: - asus,vivobook-s15 - lenovo,yoga-slim7x + - microsoft,romulus13 + - microsoft,romulus15 - qcom,x1e80100-crd - qcom,x1e80100-qcp - const: qcom,x1e80100 diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 1ef09fbfdfaf..687823e58c22 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -96,6 +96,13 @@ properties: - const: coolpi,pi-cm5 - const: rockchip,rk3588 + - description: Cool Pi CM5 GenBook + items: + - enum: + - coolpi,pi-cm5-genbook + - const: coolpi,pi-cm5 + - const: rockchip,rk3588 + - description: Cool Pi 4 Model B items: - const: coolpi,pi-4b @@ -148,6 +155,12 @@ properties: - const: engicam,px30-core - const: rockchip,px30 + - description: Firefly Core-PX30-JD4 on MB-JD4-PX30 baseboard + items: + - const: firefly,px30-jd4-core-mb + - const: firefly,px30-jd4-core + - const: rockchip,px30 + - description: Firefly Firefly-RK3288 items: - enum: @@ -216,6 +229,7 @@ properties: - friendlyarm,nanopi-r2c - friendlyarm,nanopi-r2c-plus - friendlyarm,nanopi-r2s + - friendlyarm,nanopi-r2s-plus - const: rockchip,rk3328 - description: FriendlyElec NanoPi4 series boards @@ -243,9 +257,11 @@ properties: - friendlyarm,nanopi-r6s - const: rockchip,rk3588s - - description: FriendlyElec NanoPC T6 + - description: FriendlyElec NanoPC T6 series boards items: - - const: friendlyarm,nanopc-t6 + - enum: + - friendlyarm,nanopc-t6 + - friendlyarm,nanopc-t6-lts - const: rockchip,rk3588 - description: FriendlyElec CM3588-based boards @@ -255,6 +271,11 @@ properties: - const: friendlyarm,cm3588 - const: rockchip,rk3588 + - description: GameForce Ace + items: + - const: gameforce,ace + - const: rockchip,rk3588s + - description: GameForce Chi items: - const: gameforce,chi @@ -581,9 +602,19 @@ properties: - description: Hardkernel Odroid M1 items: - - const: rockchip,rk3568-odroid-m1 + - const: hardkernel,odroid-m1 - const: rockchip,rk3568 + - description: Hardkernel Odroid M1S + items: + - const: hardkernel,odroid-m1s + - const: rockchip,rk3566 + + - description: Hardkernel Odroid M2 + items: + - const: hardkernel,odroid-m2 + - const: rockchip,rk3588s + - description: Hugsun X99 TV Box items: - const: hugsun,x99 @@ -622,6 +653,11 @@ properties: - const: leez,p710 - const: rockchip,rk3399 + - description: LCKFB Taishan Pi RK3566 + items: + - const: lckfb,tspi-rk3566 + - const: rockchip,rk3566 + - description: Lunzn FastRhino R66S / R68S items: - enum: diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml index 58099949e8f3..703d4b574398 100644 --- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml @@ -54,6 +54,8 @@ properties: - description: ST STM32MP151 based Boards items: - enum: + - prt,mecio1r0 # Protonic MECIO1r0 + - prt,mect1s # Protonic MECT1S - prt,prtt1a # Protonic PRTT1A - prt,prtt1c # Protonic PRTT1C - prt,prtt1s # Protonic PRTT1S @@ -71,6 +73,12 @@ properties: - const: dh,stm32mp151a-dhcor-som - const: st,stm32mp151 + - description: ST STM32MP153 based Boards + items: + - enum: + - prt,mecio1r1 # Protonic MECIO1r1 + - const: st,stm32mp153 + - description: DH STM32MP153 DHCOM SoM based Boards items: - const: dh,stm32mp153c-dhcom-drc02 diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml index 09dc6f424986..4aa15f3668e0 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -61,14 +61,19 @@ properties: - const: anbernic,rg35xx-2024 - const: allwinner,sun50i-h700 + - description: Anbernic RG35XX H + items: + - const: anbernic,rg35xx-h + - const: allwinner,sun50i-h700 + - description: Anbernic RG35XX Plus items: - const: anbernic,rg35xx-plus - const: allwinner,sun50i-h700 - - description: Anbernic RG35XX H + - description: Anbernic RG35XX SP items: - - const: anbernic,rg35xx-h + - const: anbernic,rg35xx-sp - const: allwinner,sun50i-h700 - description: Amarula A64 Relic diff --git a/Documentation/devicetree/bindings/arm/tegra.yaml b/Documentation/devicetree/bindings/arm/tegra.yaml index 8fb4923517d0..2889fd0e6592 100644 --- a/Documentation/devicetree/bindings/arm/tegra.yaml +++ b/Documentation/devicetree/bindings/arm/tegra.yaml @@ -128,6 +128,48 @@ properties: - const: nvidia,tegra132 - const: nvidia,tegra124 - items: + - const: google,nyan-blaze-rev10 + - const: google,nyan-blaze-rev9 + - const: google,nyan-blaze-rev8 + - const: google,nyan-blaze-rev7 + - const: google,nyan-blaze-rev6 + - const: google,nyan-blaze-rev5 + - const: google,nyan-blaze-rev4 + - const: google,nyan-blaze-rev3 + - const: google,nyan-blaze-rev2 + - const: google,nyan-blaze-rev1 + - const: google,nyan-blaze-rev0 + - const: google,nyan-blaze + - const: google,nyan + - const: nvidia,tegra124 + - items: + - const: google,nyan-big-rev10 + - const: google,nyan-big-rev9 + - const: google,nyan-big-rev8 + - const: google,nyan-big-rev7 + - const: google,nyan-big-rev6 + - const: google,nyan-big-rev5 + - const: google,nyan-big-rev4 + - const: google,nyan-big-rev3 + - const: google,nyan-big-rev2 + - const: google,nyan-big-rev1 + - const: google,nyan-big-rev0 + - const: google,nyan-big + - const: google,nyan + - const: nvidia,tegra124 + - items: + - const: google,nyan-big-rev7 + - const: google,nyan-big-rev6 + - const: google,nyan-big-rev5 + - const: google,nyan-big-rev4 + - const: google,nyan-big-rev3 + - const: google,nyan-big-rev2 + - const: google,nyan-big-rev1 + - const: google,nyan-big-rev0 + - const: google,nyan-big + - const: google,nyan + - const: nvidia,tegra124 + - items: - enum: - nvidia,darcy - nvidia,p2371-0000 diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml index 4d9c5fbb4c26..5df99e361c21 100644 --- a/Documentation/devicetree/bindings/arm/ti/k3.yaml +++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml @@ -140,6 +140,7 @@ properties: - description: K3 J722S SoC and Boards items: - enum: + - beagle,am67a-beagley-ai - ti,j722s-evm - const: ti,j722s diff --git a/Documentation/devicetree/bindings/clock/amlogic,c3-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,c3-pll-clkc.yaml index 43de3c6fc1cf..700865cc9792 100644 --- a/Documentation/devicetree/bindings/clock/amlogic,c3-pll-clkc.yaml +++ b/Documentation/devicetree/bindings/clock/amlogic,c3-pll-clkc.yaml @@ -24,11 +24,13 @@ properties: items: - description: input top pll - description: input mclk pll + - description: input fix pll clock-names: items: - const: top - const: mclk + - const: fix "#clock-cells": const: 1 @@ -52,8 +54,9 @@ examples: compatible = "amlogic,c3-pll-clkc"; reg = <0x0 0x8000 0x0 0x1a4>; clocks = <&scmi_clk 2>, - <&scmi_clk 5>; - clock-names = "top", "mclk"; + <&scmi_clk 5>, + <&scmi_clk 12>; + clock-names = "top", "mclk", "fix"; #clock-cells = <1>; }; }; diff --git a/Documentation/devicetree/bindings/clock/qcom,ipq5332-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,ipq5332-gcc.yaml index adc30d84fa8f..9193de681de2 100644 --- a/Documentation/devicetree/bindings/clock/qcom,ipq5332-gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,ipq5332-gcc.yaml @@ -31,6 +31,8 @@ properties: - description: USB PCIE wrapper pipe clock source '#power-domain-cells': false + '#interconnect-cells': + const: 1 required: - compatible diff --git a/Documentation/devicetree/bindings/clock/qcom,sm4450-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm4450-camcc.yaml new file mode 100644 index 000000000000..f54ce865880d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sm4450-camcc.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sm4450-camcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Camera Clock & Reset Controller on SM4450 + +maintainers: + - Ajit Pandey <quic_ajipan@quicinc.com> + - Taniya Das <quic_tdas@quicinc.com> + +description: | + Qualcomm camera clock control module provides the clocks, resets and power + domains on SM4450 + + See also:: include/dt-bindings/clock/qcom,sm4450-camcc.h + +properties: + compatible: + const: qcom,sm4450-camcc + + reg: + maxItems: 1 + + clocks: + items: + - description: Board XO source + - description: Camera AHB clock source from GCC + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + +required: + - compatible + - reg + - clocks + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/clock/qcom,sm4450-gcc.h> + clock-controller@ade0000 { + compatible = "qcom,sm4450-camcc"; + reg = <0x0ade0000 0x20000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_CAMERA_AHB_CLK>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,sm4450-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm4450-dispcc.yaml new file mode 100644 index 000000000000..2aa05353eff1 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sm4450-dispcc.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sm4450-dispcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display Clock & Reset Controller on SM4450 + +maintainers: + - Ajit Pandey <quic_ajipan@quicinc.com> + - Taniya Das <quic_tdas@quicinc.com> + +description: | + Qualcomm display clock control module provides the clocks, resets and power + domains on SM4450 + + See also:: include/dt-bindings/clock/qcom,sm4450-dispcc.h + +properties: + compatible: + const: qcom,sm4450-dispcc + + reg: + maxItems: 1 + + clocks: + items: + - description: Board XO source + - description: Board active XO source + - description: Display AHB clock source from GCC + - description: sleep clock source + - description: Byte clock from DSI PHY0 + - description: Pixel clock from DSI PHY0 + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + +required: + - compatible + - reg + - clocks + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/clock/qcom,sm4450-gcc.h> + clock-controller@af00000 { + compatible = "qcom,sm4450-dispcc"; + reg = <0x0af00000 0x20000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&gcc GCC_DISP_AHB_CLK>, + <&sleep_clk>, + <&dsi0_phy_pll_out_byteclk>, + <&dsi0_phy_pll_out_dsiclk>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8150-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8150-camcc.yaml new file mode 100644 index 000000000000..5e9f62d7866c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sm8150-camcc.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sm8150-camcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Camera Clock & Reset Controller on SM8150 + +maintainers: + - Satya Priya Kakitapalli <quic_skakitap@quicinc.com> + +description: | + Qualcomm camera clock control module provides the clocks, resets and + power domains on SM8150. + + See also:: include/dt-bindings/clock/qcom,sm8150-camcc.h + +properties: + compatible: + const: qcom,sm8150-camcc + + reg: + maxItems: 1 + + clocks: + items: + - description: Board XO source + - description: Camera AHB clock from GCC + + power-domains: + maxItems: 1 + description: + A phandle and PM domain specifier for the MMCX power domain. + + required-opps: + maxItems: 1 + description: + A phandle to an OPP node describing required MMCX performance point. + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + +required: + - compatible + - reg + - clocks + - power-domains + - required-opps + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sm8150.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/power/qcom-rpmpd.h> + clock-controller@ad00000 { + compatible = "qcom,sm8150-camcc"; + reg = <0x0ad00000 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_CAMERA_AHB_CLK>; + power-domains = <&rpmhpd SM8150_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml index d10bb002906e..2d2c59aa8c6b 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml @@ -14,6 +14,7 @@ description: | domains on Qualcomm SoCs. See also:: + include/dt-bindings/clock/qcom,sm4450-gpucc.h include/dt-bindings/clock/qcom,sm8450-gpucc.h include/dt-bindings/clock/qcom,sm8550-gpucc.h include/dt-bindings/reset/qcom,sm8450-gpucc.h @@ -23,6 +24,7 @@ description: | properties: compatible: enum: + - qcom,sm4450-gpucc - qcom,sm8450-gpucc - qcom,sm8550-gpucc - qcom,sm8650-gpucc diff --git a/Documentation/devicetree/bindings/clock/renesas,rzv2h-cpg.yaml b/Documentation/devicetree/bindings/clock/renesas,rzv2h-cpg.yaml new file mode 100644 index 000000000000..926c503bed1f --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,rzv2h-cpg.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/renesas,rzv2h-cpg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/V2H(P) Clock Pulse Generator (CPG) + +maintainers: + - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> + +description: + On Renesas RZ/V2H(P) SoCs, the CPG (Clock Pulse Generator) handles generation + and control of clock signals for the IP modules, generation and control of resets, + and control over booting, low power consumption and power supply domains. + +properties: + compatible: + const: renesas,r9a09g057-cpg + + reg: + maxItems: 1 + + clocks: + items: + - description: AUDIO_EXTAL clock input + - description: RTXIN clock input + - description: QEXTAL clock input + + clock-names: + items: + - const: audio_extal + - const: rtxin + - const: qextal + + '#clock-cells': + description: | + - For CPG core clocks, the two clock specifier cells must be "CPG_CORE" + and a core clock reference, as defined in + <dt-bindings/clock/renesas,r9a09g057-cpg.h>, + - For module clocks, the two clock specifier cells must be "CPG_MOD" and + a module number. The module number is calculated as the CLKON register + offset index multiplied by 16, plus the actual bit in the register + used to turn the CLK ON. For example, for CGC_GIC_0_GICCLK, the + calculation is (1 * 16 + 3) = 0x13. + const: 2 + + '#power-domain-cells': + const: 0 + + '#reset-cells': + description: + The single reset specifier cell must be the reset number. The reset number + is calculated as the reset register offset index multiplied by 16, plus the + actual bit in the register used to reset the specific IP block. For example, + for SYS_0_PRESETN, the calculation is (3 * 16 + 0) = 0x30. + const: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#power-domain-cells' + - '#reset-cells' + +additionalProperties: false + +examples: + - | + clock-controller@10420000 { + compatible = "renesas,r9a09g057-cpg"; + reg = <0x10420000 0x10000>; + clocks = <&audio_extal_clk>, <&rtxin_clk>, <&qextal_clk>; + clock-names = "audio_extal", "rtxin", "qextal"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml index 55c4f94a14d1..32f39e543b36 100644 --- a/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml +++ b/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml @@ -35,6 +35,7 @@ properties: - samsung,exynosautov9-cmu-top - samsung,exynosautov9-cmu-busmc - samsung,exynosautov9-cmu-core + - samsung,exynosautov9-cmu-dpum - samsung,exynosautov9-cmu-fsys0 - samsung,exynosautov9-cmu-fsys1 - samsung,exynosautov9-cmu-fsys2 @@ -113,6 +114,24 @@ allOf: properties: compatible: contains: + const: samsung,exynosautov9-cmu-dpum + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: DPU Main bus clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: bus + + - if: + properties: + compatible: + contains: const: samsung,exynosautov9-cmu-fsys0 then: diff --git a/Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml new file mode 100644 index 000000000000..3330b2727474 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml @@ -0,0 +1,162 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/samsung,exynosautov920-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung ExynosAuto v920 SoC clock controller + +maintainers: + - Sunyeal Hong <sunyeal.hong@samsung.com> + - Chanwoo Choi <cw00.choi@samsung.com> + - Krzysztof Kozlowski <krzk@kernel.org> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + +description: | + ExynosAuto v920 clock controller is comprised of several CMU units, generating + clocks for different domains. Those CMU units are modeled as separate device + tree nodes, and might depend on each other. Root clocks in that clock tree are + two external clocks:: OSCCLK/XTCXO (38.4 MHz) and RTCCLK/XrtcXTI (32768 Hz). + The external OSCCLK must be defined as fixed-rate clock in dts. + + CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and + dividers; all other clocks of function blocks (other CMUs) are usually + derived from CMU_TOP. + + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All clocks available for usage + in clock consumer nodes are defined as preprocessor macros in + 'include/dt-bindings/clock/samsung,exynosautov920.h' header. + +properties: + compatible: + enum: + - samsung,exynosautov920-cmu-top + - samsung,exynosautov920-cmu-peric0 + - samsung,exynosautov920-cmu-peric1 + - samsung,exynosautov920-cmu-misc + - samsung,exynosautov920-cmu-hsi0 + - samsung,exynosautov920-cmu-hsi1 + + clocks: + minItems: 1 + maxItems: 4 + + clock-names: + minItems: 1 + maxItems: 4 + + "#clock-cells": + const: 1 + + reg: + maxItems: 1 + +allOf: + - if: + properties: + compatible: + contains: + const: samsung,exynosautov920-cmu-top + + then: + properties: + clocks: + items: + - description: External reference clock (38.4 MHz) + + clock-names: + items: + - const: oscclk + + - if: + properties: + compatible: + contains: + enum: + - samsung,exynosautov920-cmu-peric0 + - samsung,exynosautov920-cmu-peric1 + + then: + properties: + clocks: + items: + - description: External reference clock (38.4 MHz) + - description: CMU_PERICn NOC clock (from CMU_TOP) + - description: CMU_PERICn IP clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: noc + - const: ip + + - if: + properties: + compatible: + enum: + - samsung,exynosautov920-cmu-misc + - samsung,exynosautov920-cmu-hsi0 + + then: + properties: + clocks: + items: + - description: External reference clock (38.4 MHz) + - description: CMU_MISC/CMU_HSI0 NOC clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: noc + + - if: + properties: + compatible: + contains: + const: samsung,exynosautov920-cmu-hsi1 + + then: + properties: + clocks: + items: + - description: External reference clock (38.4 MHz) + - description: CMU_HSI1 NOC clock (from CMU_TOP) + - description: CMU_HSI1 USBDRD clock (from CMU_TOP) + - description: CMU_HSI1 MMC_CARD clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: noc + - const: usbdrd + - const: mmc_card + +required: + - compatible + - "#clock-cells" + - clocks + - clock-names + - reg + +additionalProperties: false + +examples: + # Clock controller node for CMU_PERIC0 + - | + #include <dt-bindings/clock/samsung,exynosautov920.h> + + cmu_peric0: clock-controller@10800000 { + compatible = "samsung,exynosautov920-cmu-peric0"; + reg = <0x10800000 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top DOUT_CLKCMU_PERIC0_NOC>, + <&cmu_top DOUT_CLKCMU_PERIC0_IP>; + clock-names = "oscclk", + "noc", + "ip"; + }; + +... diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt deleted file mode 100644 index 8ced1696c325..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt +++ /dev/null @@ -1,37 +0,0 @@ -BCM2836 per-CPU interrupt controller - -The BCM2836 has a per-cpu interrupt controller for the timer, PMU -events, and SMP IPIs. One of the CPUs may receive interrupts for the -peripheral (GPU) events, which chain to the BCM2835-style interrupt -controller. - -Required properties: - -- compatible: Should be "brcm,bcm2836-l1-intc" -- reg: Specifies base physical address and size of the - registers -- interrupt-controller: Identifies the node as an interrupt controller -- #interrupt-cells: Specifies the number of cells needed to encode an - interrupt source. The value shall be 2 - -Please refer to interrupts.txt in this directory for details of the common -Interrupt Controllers bindings used by client devices. - -The interrupt sources are as follows: - -0: CNTPSIRQ -1: CNTPNSIRQ -2: CNTHPIRQ -3: CNTVIRQ -8: GPU_FAST -9: PMU_FAST - -Example: - -local_intc: local_intc { - compatible = "brcm,bcm2836-l1-intc"; - reg = <0x40000000 0x100>; - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&local_intc>; -}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.yaml new file mode 100644 index 000000000000..5fda626c80ce --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/brcm,bcm2836-l1-intc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: BCM2836 per-CPU interrupt controller + +maintainers: + - Stefan Wahren <wahrenst@gmx.net> + - Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com> + +description: + The BCM2836 has a per-cpu interrupt controller for the timer, PMU + events, and SMP IPIs. One of the CPUs may receive interrupts for the + peripheral (GPU) events, which chain to the BCM2835-style interrupt + controller. + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + const: brcm,bcm2836-l1-intc + + reg: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + +required: + - compatible + - reg + - interrupt-controller + - '#interrupt-cells' + +additionalProperties: false + +examples: + - | + local_intc: interrupt-controller@40000000 { + compatible = "brcm,bcm2836-l1-intc"; + reg = <0x40000000 0x100>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&local_intc>; + }; +... diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml index 709b2211276b..7e1451f9786a 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml @@ -67,6 +67,7 @@ properties: - allwinner,sun20i-d1-plic - sophgo,cv1800b-plic - sophgo,cv1812h-plic + - sophgo,sg2002-plic - sophgo,sg2042-plic - thead,th1520-plic - const: thead,c900-plic diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt deleted file mode 100644 index 0aa1a53012d6..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt +++ /dev/null @@ -1,178 +0,0 @@ -* Atmel AT91 Pinmux Controller - -The AT91 Pinmux Controller, enables the IC -to share one PAD to several functional blocks. The sharing is done by -multiplexing the PAD input/output signals. For each PAD there are up to -8 muxing options (called periph modes). Since different modules require -different PAD settings (like pull up, keeper, etc) the controller controls -also the PAD settings parameters. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -Atmel AT91 pin configuration node is a node of a group of pins which can be -used for a specific device or function. This node represents both mux and config -of the pins in that group. The 'pins' selects the function mode(also named pin -mode) this pin can work on and the 'config' configures various pad settings -such as pull-up, multi drive, etc. - -Required properties for iomux controller: -- compatible: "atmel,at91rm9200-pinctrl" or "atmel,at91sam9x5-pinctrl" - or "atmel,sama5d3-pinctrl" or "microchip,sam9x60-pinctrl" - or "microchip,sam9x7-pinctrl", "microchip,sam9x60-pinctrl" -- atmel,mux-mask: array of mask (periph per bank) to describe if a pin can be - configured in this periph mode. All the periph and bank need to be describe. - -How to create such array: - -Each column will represent the possible peripheral of the pinctrl -Each line will represent a pio bank - -Take an example on the 9260 -Peripheral: 2 ( A and B) -Bank: 3 (A, B and C) -=> - - /* A B */ - 0xffffffff 0xffc00c3b /* pioA */ - 0xffffffff 0x7fff3ccf /* pioB */ - 0xffffffff 0x007fffff /* pioC */ - -For each peripheral/bank we will describe in a u32 if a pin can be -configured in it by putting 1 to the pin bit (1 << pin) - -Let's take the pioA on peripheral B -From the datasheet Table 10-2. -Peripheral B -PA0 MCDB0 -PA1 MCCDB -PA2 -PA3 MCDB3 -PA4 MCDB2 -PA5 MCDB1 -PA6 -PA7 -PA8 -PA9 -PA10 ETX2 -PA11 ETX3 -PA12 -PA13 -PA14 -PA15 -PA16 -PA17 -PA18 -PA19 -PA20 -PA21 -PA22 ETXER -PA23 ETX2 -PA24 ETX3 -PA25 ERX2 -PA26 ERX3 -PA27 ERXCK -PA28 ECRS -PA29 ECOL -PA30 RXD4 -PA31 TXD4 - -=> 0xffc00c3b - -Required properties for pin configuration node: -- atmel,pins: 4 integers array, represents a group of pins mux and config - setting. The format is atmel,pins = <PIN_BANK PIN_BANK_NUM PERIPH CONFIG>. - The PERIPH 0 means gpio, PERIPH 1 is periph A, PERIPH 2 is periph B... - PIN_BANK 0 is pioA, PIN_BANK 1 is pioB... - -Bits used for CONFIG: -PULL_UP (1 << 0): indicate this pin needs a pull up. -MULTIDRIVE (1 << 1): indicate this pin needs to be configured as multi-drive. - Multi-drive is equivalent to open-drain type output. -DEGLITCH (1 << 2): indicate this pin needs deglitch. -PULL_DOWN (1 << 3): indicate this pin needs a pull down. -DIS_SCHMIT (1 << 4): indicate this pin needs to the disable schmitt trigger. -DRIVE_STRENGTH (3 << 5): indicate the drive strength of the pin using the - following values: - 00 - No change (reset state value kept) - 01 - Low - 10 - Medium - 11 - High -OUTPUT (1 << 7): indicate this pin need to be configured as an output. -OUTPUT_VAL (1 << 8): output val (1 = high, 0 = low) -SLEWRATE (1 << 9): slew rate of the pin: 0 = disable, 1 = enable -DEBOUNCE (1 << 16): indicate this pin needs debounce. -DEBOUNCE_VAL (0x3fff << 17): debounce value. - -NOTE: -Some requirements for using atmel,at91rm9200-pinctrl binding: -1. We have pin function node defined under at91 controller node to represent - what pinmux functions this SoC supports. -2. The driver can use the function node's name and pin configuration node's - name describe the pin function and group hierarchy. - For example, Linux at91 pinctrl driver takes the function node's name - as the function name and pin configuration node's name as group name to - create the map table. -3. Each pin configuration node should have a phandle, devices can set pins - configurations by referring to the phandle of that pin configuration node. -4. The gpio controller must be describe in the pinctrl simple-bus. - -For each bank the required properties are: -- compatible: "atmel,at91sam9x5-gpio" or "atmel,at91rm9200-gpio" or - "microchip,sam9x60-gpio" - or "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio" -- reg: physical base address and length of the controller's registers -- interrupts: interrupt outputs from the controller -- interrupt-controller: marks the device node as an interrupt controller -- #interrupt-cells: should be 2; refer to ../interrupt-controller/interrupts.txt - for more details. -- gpio-controller -- #gpio-cells: should be 2; the first cell is the GPIO number and the second - cell specifies GPIO flags as defined in <dt-bindings/gpio/gpio.h>. -- clocks: bank clock - -Examples: - -pinctrl@fffff400 { - #address-cells = <1>; - #size-cells = <1>; - ranges; - compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; - reg = <0xfffff400 0x600>; - - pioA: gpio@fffff400 { - compatible = "atmel,at91sam9x5-gpio"; - reg = <0xfffff400 0x200>; - interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; - }; - - atmel,mux-mask = < - /* A B */ - 0xffffffff 0xffc00c3b /* pioA */ - 0xffffffff 0x7fff3ccf /* pioB */ - 0xffffffff 0x007fffff /* pioC */ - >; - - /* shared pinctrl settings */ - dbgu { - pinctrl_dbgu: dbgu-0 { - atmel,pins = - <1 14 0x1 0x0 /* PB14 periph A */ - 1 15 0x1 0x1>; /* PB15 periph A with pullup */ - }; - }; -}; - -dbgu: serial@fffff200 { - compatible = "atmel,at91sam9260-usart"; - reg = <0xfffff200 0x200>; - interrupts = <1 4 7>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_dbgu>; -}; diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91rm9200-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/atmel,at91rm9200-pinctrl.yaml new file mode 100644 index 000000000000..1bb386b42039 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91rm9200-pinctrl.yaml @@ -0,0 +1,184 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/atmel,at91rm9200-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip PIO3 Pinmux Controller + +maintainers: + - Manikandan Muralidharan <manikandan.m@microchip.com> + +description: + The AT91 Pinmux Controller, enables the IC to share one PAD to several + functional blocks. The sharing is done by multiplexing the PAD input/output + signals. For each PAD there are up to 8 muxing options (called periph modes). + Since different modules require different PAD settings (like pull up, keeper, + etc) the controller controls also the PAD settings parameters. + +properties: + compatible: + oneOf: + - items: + - enum: + - atmel,at91rm9200-pinctrl + - atmel,at91sam9x5-pinctrl + - atmel,sama5d3-pinctrl + - microchip,sam9x60-pinctrl + - const: simple-mfd + - items: + - enum: + - microchip,sam9x7-pinctrl + - const: microchip,sam9x60-pinctrl + - const: simple-mfd + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + ranges: true + + atmel,mux-mask: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: | + Array of mask (periph per bank) to describe if a pin can be + configured in this periph mode. All the periph and bank need to + be described. + + #How to create such array: + + Each column will represent the possible peripheral of the pinctrl + Each line will represent a pio bank + + #Example: + + In at91sam9260.dtsi, + Peripheral: 2 ( A and B) + Bank: 3 (A, B and C) + + # A B + 0xffffffff 0xffc00c3b # pioA + 0xffffffff 0x7fff3ccf # pioB + 0xffffffff 0x007fffff # pioC + + For each peripheral/bank we will describe in a u32 if a pin can be + configured in it by putting 1 to the pin bit (1 << pin) + + Let's take the pioA on peripheral B whose value is 0xffc00c3b + From the datasheet Table 10-2. + Peripheral B + PA0 MCDB0 + PA1 MCCDB + PA2 + PA3 MCDB3 + PA4 MCDB2 + PA5 MCDB1 + PA6 + PA7 + PA8 + PA9 + PA10 ETX2 + PA11 ETX3 + PA12 + PA13 + PA14 + PA15 + PA16 + PA17 + PA18 + PA19 + PA20 + PA21 + PA22 ETXER + PA23 ETX2 + PA24 ETX3 + PA25 ERX2 + PA26 ERX3 + PA27 ERXCK + PA28 ECRS + PA29 ECOL + PA30 RXD4 + PA31 TXD4 + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + - ranges + - "#address-cells" + - "#size-cells" + - atmel,mux-mask + +patternProperties: + 'gpio@[0-9a-f]+$': + $ref: /schemas/gpio/atmel,at91rm9200-gpio.yaml + unevaluatedProperties: false + +additionalProperties: + type: object + additionalProperties: + type: object + additionalProperties: false + + properties: + atmel,pins: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: | + Each entry consists of 4 integers and represents the pins + mux and config setting.The format is + atmel,pins = <PIN_BANK PIN_BANK_NUM PERIPH CONFIG>. + Supported pin number and mux varies for different SoCs, and + are defined in <include/dt-bindings/pinctrl/at91.h>. + items: + items: + - description: + Pin bank + - description: + Pin bank index + - description: + Peripheral function + - description: + Pad configuration + +examples: + - | + #include <dt-bindings/clock/at91.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/pinctrl/at91.h> + + pinctrl@fffff400 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91rm9200-pinctrl", "simple-mfd"; + ranges = <0xfffff400 0xfffff400 0x600>; + + atmel,mux-mask = < + /* A B */ + 0xffffffff 0xffc00c3b /* pioA */ + 0xffffffff 0x7fff3ccf /* pioB */ + 0xffffffff 0x007fffff /* pioC */ + >; + + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP + AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + pioA: gpio@fffff400 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml index e76fb273490f..347571e2545a 100644 --- a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml +++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml @@ -25,6 +25,7 @@ properties: - renesas,r8a7745-sysc # RZ/G1E - renesas,r8a77470-sysc # RZ/G1C - renesas,r8a774a1-sysc # RZ/G2M + - renesas,r8a774a3-sysc # RZ/G2M v3.0 - renesas,r8a774b1-sysc # RZ/G2N - renesas,r8a774c0-sysc # RZ/G2E - renesas,r8a774e1-sysc # RZ/G2H diff --git a/Documentation/devicetree/bindings/reset/renesas,rst.yaml b/Documentation/devicetree/bindings/reset/renesas,rst.yaml index 58b4a45d3380..7a81491379b0 100644 --- a/Documentation/devicetree/bindings/reset/renesas,rst.yaml +++ b/Documentation/devicetree/bindings/reset/renesas,rst.yaml @@ -29,6 +29,7 @@ properties: - renesas,r8a7745-rst # RZ/G1E - renesas,r8a77470-rst # RZ/G1C - renesas,r8a774a1-rst # RZ/G2M + - renesas,r8a774a3-rst # RZ/G2M v3.0 - renesas,r8a774b1-rst # RZ/G2N - renesas,r8a774c0-rst # RZ/G2E - renesas,r8a774e1-rst # RZ/G2H diff --git a/Documentation/devicetree/bindings/riscv/sophgo.yaml b/Documentation/devicetree/bindings/riscv/sophgo.yaml index 9bc813dad098..a14cb10ff3f0 100644 --- a/Documentation/devicetree/bindings/riscv/sophgo.yaml +++ b/Documentation/devicetree/bindings/riscv/sophgo.yaml @@ -28,6 +28,11 @@ properties: - const: sophgo,cv1812h - items: - enum: + - sipeed,licheerv-nano-b + - const: sipeed,licheerv-nano + - const: sophgo,sg2002 + - items: + - enum: - milkv,pioneer - const: sophgo,sg2042 diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2711-avs-monitor.yaml b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2711-avs-monitor.yaml new file mode 100644 index 000000000000..e02d9d7e7d9a --- /dev/null +++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2711-avs-monitor.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/bcm/brcm,bcm2711-avs-monitor.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom AVS Monitor + +maintainers: + - Stefan Wahren <wahrenst@gmx.net> + +properties: + compatible: + items: + - const: brcm,bcm2711-avs-monitor + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + thermal: + $ref: /schemas/thermal/brcm,avs-ro-thermal.yaml + description: Broadcom AVS ring oscillator thermal + +required: + - compatible + - reg + - thermal + +additionalProperties: false + +examples: + - | + avs-monitor@7d5d2000 { + compatible = "brcm,bcm2711-avs-monitor", "syscon", "simple-mfd"; + reg = <0x7d5d2000 0xf00>; + + thermal: thermal { + compatible = "brcm,bcm2711-thermal"; + #thermal-sensor-cells = <0>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas.yaml index 09d3ce97efa2..b7acb65bdecd 100644 --- a/Documentation/devicetree/bindings/soc/renesas/renesas.yaml +++ b/Documentation/devicetree/bindings/soc/renesas/renesas.yaml @@ -127,6 +127,18 @@ properties: - const: hoperun,hihope-rzg2m - const: renesas,r8a774a1 + - description: RZ/G2M v3.0 (R8A774A3) + items: + - enum: + - hoperun,hihope-rzg2m # HopeRun HiHope RZ/G2M platform + - const: renesas,r8a774a3 + + - items: + - enum: + - hoperun,hihope-rzg2-ex # HopeRun expansion board for HiHope RZ/G2 platforms + - const: hoperun,hihope-rzg2m + - const: renesas,r8a774a3 + - description: RZ/G2N (R8A774B1) items: - enum: @@ -516,6 +528,8 @@ properties: - description: RZ/V2H(P) (R9A09G057) items: - enum: + - renesas,rzv2h-evk # RZ/V2H EVK + - enum: - renesas,r9a09g057h41 # RZ/V2H - renesas,r9a09g057h42 # RZ/V2H with Mali-G31 support - renesas,r9a09g057h44 # RZ/V2HP with Mali-G31 + Mali-C55 support diff --git a/Documentation/devicetree/bindings/soc/ti/ti,am654-serdes-ctrl.yaml b/Documentation/devicetree/bindings/soc/ti/ti,am654-serdes-ctrl.yaml index a10a3b89ae05..94b36943a50f 100644 --- a/Documentation/devicetree/bindings/soc/ti/ti,am654-serdes-ctrl.yaml +++ b/Documentation/devicetree/bindings/soc/ti/ti,am654-serdes-ctrl.yaml @@ -14,6 +14,7 @@ properties: items: - const: ti,am654-serdes-ctrl - const: syscon + - const: simple-mfd reg: maxItems: 1 @@ -31,7 +32,7 @@ additionalProperties: false examples: - | clock@4080 { - compatible = "ti,am654-serdes-ctrl", "syscon"; + compatible = "ti,am654-serdes-ctrl", "syscon", "simple-mfd"; reg = <0x4080 0x4>; mux-controller { diff --git a/Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.txt b/Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.txt deleted file mode 100644 index 844bd5fbd04c..000000000000 --- a/Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.txt +++ /dev/null @@ -1,22 +0,0 @@ -BCM2835 System Timer - -The System Timer peripheral provides four 32-bit timer channels and a -single 64-bit free running counter. Each channel has an output compare -register, which is compared against the 32 least significant bits of the -free running counter values, and generates an interrupt. - -Required properties: - -- compatible : should be "brcm,bcm2835-system-timer" -- reg : Specifies base physical address and size of the registers. -- interrupts : A list of 4 interrupt sinks; one per timer channel. -- clock-frequency : The frequency of the clock that drives the counter, in Hz. - -Example: - -timer { - compatible = "brcm,bcm2835-system-timer"; - reg = <0x7e003000 0x1000>; - interrupts = <1 0>, <1 1>, <1 2>, <1 3>; - clock-frequency = <1000000>; -}; diff --git a/Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.yaml b/Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.yaml new file mode 100644 index 000000000000..f5804b5b0e63 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/brcm,bcm2835-system-timer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: BCM2835 System Timer + +maintainers: + - Stefan Wahren <wahrenst@gmx.net> + - Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com> + +description: + The System Timer peripheral provides four 32-bit timer channels and a + single 64-bit free running counter. Each channel has an output compare + register, which is compared against the 32 least significant bits of the + free running counter values, and generates an interrupt. + +properties: + compatible: + const: brcm,bcm2835-system-timer + + reg: + maxItems: 1 + + interrupts: + items: + - description: System Timer Compare 0 match (used by VideoCore GPU) + - description: System Timer Compare 1 match (usable for ARM core) + - description: System Timer Compare 2 match (used by VideoCore GPU) + - description: System Timer Compare 3 match (usable for ARM core) + + clock-frequency: true + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + timer@7e003000 { + compatible = "brcm,bcm2835-system-timer"; + reg = <0x7e003000 0x1000>; + interrupts = <1 0>, <1 1>, <1 2>, <1 3>; + clock-frequency = <1000000>; + }; +... diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index a70ce43b3dc0..e5d64fc4fe31 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -804,6 +804,8 @@ patternProperties: description: Lantiq Semiconductor "^lattice,.*": description: Lattice Semiconductor + "^lckfb,.*": + description: Shenzhen JLC Technology Group Co., Ltd. "^lctech,.*": description: Shenzen LC Technology Co., Ltd. "^leadtek,.*": diff --git a/MAINTAINERS b/MAINTAINERS index 01ecdf2e2d43..2144ff480940 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -23303,9 +23303,8 @@ TQ SYSTEMS BOARD & DRIVER SUPPORT L: linux@ew.tq-group.com S: Supported W: https://www.tq-group.com/en/products/tq-embedded/ -F: arch/arm/boot/dts/imx*mba*.dts* -F: arch/arm/boot/dts/imx*tqma*.dts* -F: arch/arm/boot/dts/mba*.dtsi +F: arch/arm/boot/dts/nxp/imx/*mba*.dts* +F: arch/arm/boot/dts/nxp/imx/*tqma*.dts* F: arch/arm64/boot/dts/freescale/fsl-*tqml*.dts* F: arch/arm64/boot/dts/freescale/imx*mba*.dts* F: arch/arm64/boot/dts/freescale/imx*tqma*.dts* diff --git a/arch/arm/boot/dts/amlogic/meson8b-ec100.dts b/arch/arm/boot/dts/amlogic/meson8b-ec100.dts index 3da47349eaaf..49890eb12781 100644 --- a/arch/arm/boot/dts/amlogic/meson8b-ec100.dts +++ b/arch/arm/boot/dts/amlogic/meson8b-ec100.dts @@ -34,8 +34,6 @@ gpio-keys { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>; pal-switch { diff --git a/arch/arm/boot/dts/arm/arm-realview-eb-mp.dtsi b/arch/arm/boot/dts/arm/arm-realview-eb-mp.dtsi index 26783d053ac7..40f7515aa068 100644 --- a/arch/arm/boot/dts/arm/arm-realview-eb-mp.dtsi +++ b/arch/arm/boot/dts/arm/arm-realview-eb-mp.dtsi @@ -103,7 +103,7 @@ }; /* PMU with one IRQ line per core */ - pmu: pmu@0 { + pmu: pmu { compatible = "arm,arm11mpcore-pmu"; interrupt-parent = <&intc>; interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts index ce35748f3d25..db1b6793cd2c 100644 --- a/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts +++ b/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts @@ -92,7 +92,7 @@ <0x1f000100 0x100>; }; - L2: cache-controller { + L2: cache-controller@1f002000 { compatible = "arm,l220-cache"; reg = <0x1f002000 0x1000>; interrupt-parent = <&intc_tc11mp>; diff --git a/arch/arm/boot/dts/arm/arm-realview-pba8.dts b/arch/arm/boot/dts/arm/arm-realview-pba8.dts index d3238c252b59..d2e0082245f9 100644 --- a/arch/arm/boot/dts/arm/arm-realview-pba8.dts +++ b/arch/arm/boot/dts/arm/arm-realview-pba8.dts @@ -40,7 +40,7 @@ }; }; - pmu: pmu@0 { + pmu: pmu { compatible = "arm,cortex-a8-pmu"; interrupt-parent = <&intc>; interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/arm/arm-realview-pbx-a9.dts b/arch/arm/boot/dts/arm/arm-realview-pbx-a9.dts index 85d3968fbb91..507ad7ac4974 100644 --- a/arch/arm/boot/dts/arm/arm-realview-pbx-a9.dts +++ b/arch/arm/boot/dts/arm/arm-realview-pbx-a9.dts @@ -97,7 +97,7 @@ interrupts = <1 14 0xf04>; }; - pmu: pmu@0 { + pmu: pmu { compatible = "arm,cortex-a9-pmu"; interrupt-parent = <&intc>; interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile index e51c6d203725..c4f064e4b073 100644 --- a/arch/arm/boot/dts/aspeed/Makefile +++ b/arch/arm/boot/dts/aspeed/Makefile @@ -17,6 +17,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-bytedance-g220a.dtb \ aspeed-bmc-delta-ahe50dc.dtb \ aspeed-bmc-facebook-bletchley.dtb \ + aspeed-bmc-facebook-catalina.dtb \ aspeed-bmc-facebook-cmm.dtb \ aspeed-bmc-facebook-elbert.dtb \ aspeed-bmc-facebook-fuji.dtb \ @@ -32,8 +33,10 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-facebook-yamp.dtb \ aspeed-bmc-facebook-yosemitev2.dtb \ aspeed-bmc-facebook-yosemite4.dtb \ + aspeed-bmc-ibm-blueridge.dtb \ aspeed-bmc-ibm-bonnell.dtb \ aspeed-bmc-ibm-everest.dtb \ + aspeed-bmc-ibm-fuji.dtb \ aspeed-bmc-ibm-rainier.dtb \ aspeed-bmc-ibm-rainier-1s4u.dtb \ aspeed-bmc-ibm-rainier-4u.dtb \ diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts index 8ab5f301f926..31c5d319aa0a 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts @@ -49,6 +49,11 @@ */ i2c80 = &nvme_m2_0; i2c81 = &nvme_m2_1; + + /* + * i2c bus 82 assigned to OCP slot + */ + i2c82 = &ocpslot; }; chosen { @@ -420,6 +425,17 @@ reg = <0x70>; i2c-mux-idle-disconnect; + ocpslot: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + ocpslot_temp: temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + }; + nvmeslot_0_7: i2c@3 { #address-cells = <1>; #size-cells = <0>; @@ -672,10 +688,6 @@ memory-region = <&gfx_memory>; }; -&pinctrl { - aspeed,external-nodes = <&gfx &lhc>; -}; - &pwm_tacho { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts index 3c8925034a8c..0295f5adcfbc 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts @@ -16,6 +16,32 @@ serial8 = &uart9; /* + * I2C temperature alias port + */ + i2c20 = &i2c4_bus70_chn0; + i2c21 = &i2c4_bus70_chn1; + i2c22 = &i2c4_bus70_chn2; + i2c23 = &i2c4_bus70_chn3; + + /* + * i2c bus 30-31 assigned to OCP slot 0-1 + */ + i2c30 = &ocpslot_0; + i2c31 = &ocpslot_1; + + /* + * i2c bus 32-33 assigned to Riser slot 0-1 + */ + i2c32 = &i2c_riser0; + i2c33 = &i2c_riser1; + + /* + * i2c bus 38-39 assigned to FRU on Riser slot 0-1 + */ + i2c38 = &i2c_riser0_chn_0; + i2c39 = &i2c_riser1_chn_0; + + /* * I2C NVMe alias port */ i2c100 = &backplane_0; @@ -87,6 +113,37 @@ }; }; + leds { + compatible = "gpio-leds"; + /* + * Use gpio-leds to configure GPIOW5 (bmc-ready) pin to be reseted when + * watchdog timeout. + */ + led-bmc-ready { + gpios = <&gpio0 ASPEED_GPIO(W, 5) (GPIO_ACTIVE_HIGH | GPIO_TRANSITORY)>; + }; + + led-sw-heartbeat { + gpios = <&gpio0 ASPEED_GPIO(N, 3) GPIO_ACTIVE_HIGH>; + }; + + led-identify { + gpios = <&gpio0 ASPEED_GPIO(S, 3) GPIO_ACTIVE_HIGH>; + }; + + led-fault { + gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>; + }; + + led-fan-fault { + gpios = <&gpio_expander1 0 GPIO_ACTIVE_HIGH>; + }; + + led-psu-fault { + gpios = <&gpio_expander1 1 GPIO_ACTIVE_HIGH>; + }; + }; + voltage_mon_reg: voltage-mon-regulator { compatible = "regulator-fixed"; regulator-name = "ltc2497_reg"; @@ -515,6 +572,80 @@ #size-cells = <0>; reg = <0x70>; i2c-mux-idle-disconnect; + + ocpslot_0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + ocpslot_0_temp: temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + }; + + ocpslot_1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + + ocpslot_1_temp: temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + }; + + i2c_riser0: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + i2c-mux@72 { + compatible = "nxp,pca9546"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72>; + i2c-mux-idle-disconnect; + + i2c_riser0_chn_0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + }; + }; + }; + + i2c_riser1: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + i2c-mux@72 { + compatible = "nxp,pca9546"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72>; + i2c-mux-idle-disconnect; + + i2c_riser1_chn_0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + }; + }; + }; }; }; @@ -790,6 +921,10 @@ }; }; +&i2c10 { + status = "okay"; +}; + &i2c11 { status = "okay"; ssif-bmc@10 { @@ -812,6 +947,25 @@ }; }; +&i2c15 { + status = "okay"; + gpio_expander1: gpio-expander@22 { + compatible = "nxp,pca9535"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "fan-fault","psu-fault", + "","", + "","", + "","", + "","", + "","", + "","", + "",""; + }; +}; + &adc0 { status = "okay"; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts index 7c6af7f226e7..29c68c37e7f5 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts @@ -200,10 +200,6 @@ status = "okay"; }; -&pinctrl { - aspeed,external-nodes = <&gfx &lhc>; -}; - &gpio { pin_gpio_c7 { gpio-hog; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts index 555485871e7a..c4097e4f2ca4 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts @@ -110,11 +110,15 @@ compatible = "st,24c128", "atmel,24c128"; reg = <0x50>; pagesize = <16>; - #address-cells = <1>; - #size-cells = <1>; - eth0_macaddress: macaddress@3f80 { - reg = <0x3f80 6>; + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eth0_macaddress: macaddress@3f80 { + reg = <0x3f80 6>; + }; }; }; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts index 8dee4faa9e07..0943e0bf1305 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts @@ -254,10 +254,6 @@ status = "okay"; }; -&pinctrl { - aspeed,external-nodes = <&gfx &lhc>; -}; - &vhub { status = "okay"; }; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts new file mode 100644 index 000000000000..82835e96317d --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts @@ -0,0 +1,1110 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2021 Facebook Inc. +/dts-v1/; + +#include "aspeed-g6.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/usb/pd.h> +#include <dt-bindings/leds/leds-pca955x.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/i2c/i2c.h> + +/ { + model = "Facebook Catalina BMC"; + compatible = "facebook,catalina-bmc", "aspeed,ast2600"; + + aliases { + serial0 = &uart1; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + i2c16 = &i2c1mux0ch0; + i2c17 = &i2c1mux0ch1; + i2c18 = &i2c1mux0ch2; + i2c19 = &i2c1mux0ch3; + i2c20 = &i2c1mux0ch4; + i2c21 = &i2c1mux0ch5; + i2c22 = &i2c1mux0ch6; + i2c23 = &i2c1mux0ch7; + i2c24 = &i2c0mux0ch0; + i2c25 = &i2c0mux0ch1; + i2c26 = &i2c0mux0ch2; + i2c27 = &i2c0mux0ch3; + i2c28 = &i2c0mux1ch0; + i2c29 = &i2c0mux1ch1; + i2c30 = &i2c0mux1ch2; + i2c31 = &i2c0mux1ch3; + i2c32 = &i2c0mux2ch0; + i2c33 = &i2c0mux2ch1; + i2c34 = &i2c0mux2ch2; + i2c35 = &i2c0mux2ch3; + i2c36 = &i2c0mux3ch0; + i2c37 = &i2c0mux3ch1; + i2c38 = &i2c0mux3ch2; + i2c39 = &i2c0mux3ch3; + i2c40 = &i2c0mux4ch0; + i2c41 = &i2c0mux4ch1; + i2c42 = &i2c0mux4ch2; + i2c43 = &i2c0mux4ch3; + i2c44 = &i2c0mux5ch0; + i2c45 = &i2c0mux5ch1; + i2c46 = &i2c0mux5ch2; + i2c47 = &i2c0mux5ch3; + i2c48 = &i2c30mux0ch0; + i2c49 = &i2c30mux0ch1; + i2c50 = &i2c30mux0ch2; + i2c51 = &i2c30mux0ch3; + i2c52 = &i2c30mux0ch4; + i2c53 = &i2c30mux0ch5; + i2c54 = &i2c30mux0ch6; + i2c55 = &i2c30mux0ch7; + }; + + chosen { + stdout-path = "serial4:57600n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>, + <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>, + <&adc1 2>; + }; + + spi1_gpio: spi { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>; + miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>; + num-chipselects = <1>; + + tpm@0 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + spi-max-frequency = <33000000>; + reg = <0>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + label = "bmc_heartbeat_amber"; + gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + led-1 { + label = "fp_id_amber"; + default-state = "off"; + gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>; + }; + + led-2 { + label = "bmc_ready_noled"; + gpios = <&gpio0 ASPEED_GPIO(B, 3) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>; + }; + + led-3 { + label = "bmc_ready_cpld_noled"; + gpios = <&gpio0 ASPEED_GPIO(P, 5) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>; + }; + }; + + p1v8_bmc_aux: regulator-p1v8-bmc-aux { + compatible = "regulator-fixed"; + regulator-name = "p1v8_bmc_aux"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + p2v5_bmc_aux: regulator-p2v5-bmc-aux { + compatible = "regulator-fixed"; + regulator-name = "p2v5_bmc_aux"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; +}; + +&uart1 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&mac3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ncsi4_default>; + use-ncsi; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-128.dtsi" + }; + flash@1 { + status = "okay"; + m25p,fast-read; + label = "alt-bmc"; + spi-max-frequency = <50000000>; + }; +}; + +&i2c0 { + status = "okay"; + + i2c-mux@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + + i2c0mux0ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2c0mux0ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c0mux0ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + i2c0mux0ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-mux@72 { + compatible = "nxp,pca9546"; + reg = <0x72>; + #address-cells = <1>; + #size-cells = <0>; + + i2c0mux1ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2c0mux1ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + // IO Mezz 0 IOEXP + io_expander7: gpio@20 { + compatible = "nxp,pca9535"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + // IO Mezz 0 FRU EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + i2c0mux1ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + i2c-mux@70 { + compatible = "nxp,pca9548"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2c30mux0ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2c30mux0ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c30mux0ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + i2c30mux0ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + i2c30mux0ch4: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + i2c30mux0ch5: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + i2c30mux0ch6: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + // HDD FRU EEPROM + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; + }; + i2c30mux0ch7: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + + power-sensor@40 { + compatible = "ti,ina230"; + reg = <0x40>; + shunt-resistor = <2000>; + }; + power-sensor@41 { + compatible = "ti,ina230"; + reg = <0x41>; + shunt-resistor = <2000>; + }; + power-sensor@44 { + compatible = "ti,ina230"; + reg = <0x44>; + shunt-resistor = <2000>; + }; + power-sensor@45 { + compatible = "ti,ina230"; + reg = <0x45>; + shunt-resistor = <2000>; + }; + }; + }; + }; + i2c0mux1ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-mux@73 { + compatible = "nxp,pca9546"; + reg = <0x73>; + #address-cells = <1>; + #size-cells = <0>; + + i2c0mux2ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2c0mux2ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c0mux2ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + i2c0mux2ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-mux@75 { + compatible = "nxp,pca9546"; + reg = <0x75>; + #address-cells = <1>; + #size-cells = <0>; + + i2c0mux3ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2c0mux3ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c0mux3ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + i2c0mux3ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-mux@76 { + compatible = "nxp,pca9546"; + reg = <0x76>; + #address-cells = <1>; + #size-cells = <0>; + + i2c0mux4ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2c0mux4ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + // IO Mezz 1 IOEXP + io_expander8: gpio@21 { + compatible = "nxp,pca9535"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + // IO Mezz 1 FRU EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + i2c0mux4ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + i2c0mux4ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-mux@77 { + compatible = "nxp,pca9546"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c0mux5ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2c0mux5ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c0mux5ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + i2c0mux5ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c1 { + status = "okay"; + i2c-mux@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + i2c1mux0ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + power-sensor@41 { + compatible = "ti,ina238"; + reg = <0x41>; + shunt-resistor = <500>; + }; + power-sensor@42 { + compatible = "ti,ina238"; + reg = <0x42>; + shunt-resistor = <500>; + }; + power-sensor@44 { + compatible = "ti,ina238"; + reg = <0x44>; + shunt-resistor = <500>; + }; + }; + i2c1mux0ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + + power-sensor@41 { + compatible = "ti,ina238"; + reg = <0x41>; + }; + power-sensor@43 { + compatible = "ti,ina238"; + reg = <0x43>; + }; + }; + i2c1mux0ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + }; + i2c1mux0ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + }; + i2c1mux0ch4: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4>; + + power-monitor@42 { + compatible = "lltc,ltc4287"; + reg = <0x42>; + shunt-resistor-micro-ohms = <200>; + }; + power-monitor@43 { + compatible = "lltc,ltc4287"; + reg = <0x43>; + shunt-resistor-micro-ohms = <200>; + }; + }; + i2c1mux0ch5: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x5>; + + // PDB FRU EEPROM + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; + + // PDB TEMP SENSOR + temperature-sensor@4f { + compatible = "ti,tmp75"; + reg = <0x4f>; + }; + }; + i2c1mux0ch6: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x6>; + + // PDB IOEXP + io_expander5: gpio@27 { + compatible = "nxp,pca9554"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + }; + + // OSFP IOEXP + io_expander6: gpio@25 { + compatible = "nxp,pca9555"; + reg = <0x25>; + gpio-controller; + #gpio-cells = <2>; + }; + + // OSFP FRU EEPROM + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + }; + i2c1mux0ch7: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x7>; + + // FIO FRU EEPROM + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + + // FIO TEMP SENSOR + temperature-sensor@4b { + compatible = "ti,tmp75"; + reg = <0x4b>; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; + + // Module 0 IOEXP + io_expander0: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(B, 4) IRQ_TYPE_LEVEL_LOW>; + }; + + // Module 1 IOEXP + io_expander1: gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(B, 4) IRQ_TYPE_LEVEL_LOW>; + }; + + // HMC IOEXP + io_expander2: gpio@27 { + compatible = "nxp,pca9555"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(B, 4) IRQ_TYPE_LEVEL_LOW>; + }; + + // Module 0 EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + // Module 1 EEPROM + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; + + // BMC IOEXP on Module 0 + io_expander3: gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + rtc@6f { + compatible = "nuvoton,nct3018y"; + reg = <0x6f>; + }; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; + + // SCM CPLD IOEXP + io_expander4: gpio@4f { + compatible = "nxp,pca9555"; + reg = <0x4f>; + gpio-controller; + #gpio-cells = <2>; + }; + + // SCM TEMP SENSOR + temperature-sensor@4b { + compatible = "ti,tmp75"; + reg = <0x4b>; + }; + + // SCM FRU EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + // BSM FRU EEPROM + eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + }; +}; + +&i2c10 { + status = "okay"; + + // OCP NIC0 TEMP + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + + // OCP NIC0 FRU EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; +}; + +&i2c11 { + status = "okay"; + + ssif-bmc@10 { + compatible = "ssif-bmc"; + reg = <0x10>; + }; +}; + +&i2c12 { + status = "okay"; + + // Module 1 FRU EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; +}; + +&i2c13 { + status = "okay"; + + // Module 0 FRU EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + // Left CBC FRU EEPROM + eeprom@54 { + compatible = "atmel,24c02"; + reg = <0x54>; + }; + + // Right CBC FRU EEPROM + eeprom@55 { + compatible = "atmel,24c02"; + reg = <0x55>; + }; + + // HMC FRU EEPROM + eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + }; +}; + +&i2c14 { + status = "okay"; + + // PDB CPLD IOEXP 0x10 + io_expander9: gpio@10 { + compatible = "nxp,pca9555"; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; + reg = <0x10>; + gpio-controller; + #gpio-cells = <2>; + }; + + // PDB CPLD IOEXP 0x11 + io_expander10: gpio@11 { + compatible = "nxp,pca9555"; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; + reg = <0x11>; + gpio-controller; + #gpio-cells = <2>; + }; + + // PDB CPLD IOEXP 0x12 + io_expander11: gpio@12 { + compatible = "nxp,pca9555"; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; + reg = <0x12>; + gpio-controller; + #gpio-cells = <2>; + }; + + // PDB CPLD IOEXP 0x13 + io_expander12: gpio@13 { + compatible = "nxp,pca9555"; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; + reg = <0x13>; + gpio-controller; + #gpio-cells = <2>; + }; + + // PDB CPLD IOEXP 0x14 + io_expander13: gpio@14 { + compatible = "nxp,pca9555"; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; + reg = <0x14>; + gpio-controller; + #gpio-cells = <2>; + }; + + // PDB CPLD IOEXP 0x15 + io_expander14: gpio@15 { + compatible = "nxp,pca9555"; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; + reg = <0x15>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&i2c15 { + status = "okay"; + + // OCP NIC1 TEMP + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + + // OCP NIC1 FRU EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; +}; + +&adc0 { + vref-supply = <&p1v8_bmc_aux>; + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default + &pinctrl_adc2_default &pinctrl_adc3_default + &pinctrl_adc4_default &pinctrl_adc5_default + &pinctrl_adc6_default &pinctrl_adc7_default>; +}; + +&adc1 { + vref-supply = <&p2v5_bmc_aux>; + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc10_default>; +}; + +&ehci0 { + status = "okay"; +}; + +&wdt1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; + aspeed,reset-type = "soc"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + aspeed,ext-pulse-duration = <256>; +}; + +&pinctrl { + pinctrl_ncsi3_default: ncsi3_default { + function = "RMII3"; + groups = "NCSI3"; + }; + + pinctrl_ncsi4_default: ncsi4_default { + function = "RMII4"; + groups = "NCSI4"; + }; +}; + +&gpio0 { + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "BATTERY_DETECT","PRSNT1_HPM_SCM_N", + "BMC_I2C1_FPGA_ALERT_L","BMC_READY", + "IOEXP_INT_L","FM_ID_LED", + "","", + /*C0-C7*/ "","","","", + "PMBUS_REQ_N","PSU_FW_UPDATE_REQ_N", + "","BMC_I2C_SSIF_ALERT_L", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "","","","","","","","", + /*G0-G7*/ "","","","","","", + "FM_DEBUG_PORT_PRSNT_N","FM_BMC_DBP_PRESENT_N", + /*H0-H7*/ "PWR_BRAKE_L","RUN_POWER_EN", + "SHDN_FORCE_L","SHDN_REQ_L", + "","","","", + /*I0-I7*/ "","","","", + "","FLASH_WP_STATUS", + "FM_PDB_HEALTH_N","RUN_POWER_PG", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "PCIE_EP_RST_EN","BMC_FRU_WP", + "SCM_HPM_STBY_RST_N","SCM_HPM_STBY_EN", + "STBY_POWER_PG_3V3","TH500_SHDN_OK_L","","", + /*N0-N7*/ "LED_POSTCODE_0","LED_POSTCODE_1", + "LED_POSTCODE_2","LED_POSTCODE_3", + "LED_POSTCODE_4","LED_POSTCODE_5", + "LED_POSTCODE_6","LED_POSTCODE_7", + /*O0-O7*/ "HMC_I2C3_FPGA_ALERT_L","FPGA_READY_HMC", + "CHASSIS_AC_LOSS_L","BSM_PRSNT_R_N", + "PSU_SMB_ALERT_L","FM_TPM_PRSNT_0_N", + "","USBDBG_IPMI_EN_L", + /*P0-P7*/ "PWR_BTN_BMC_N","IPEX_CABLE_PRSNT_L", + "ID_RST_BTN_BMC_N","RST_BMC_RSTBTN_OUT_N", + "host0-ready","BMC_READY_CPLD","","BMC_HEARTBEAT_N", + /*Q0-Q7*/ "IRQ_PCH_TPM_SPI_N","USB_OC0_REAR_R_N", + "UART_MUX_SEL","I2C_MUX_RESET_L", + "RSVD_NV_PLT_DETECT","SPI_TPM_INT_L", + "CPU_JTAG_MUX_SELECT","THERM_BB_OVERT_L", + /*R0-R7*/ "THERM_BB_WARN_L","SPI_BMC_FPGA_INT_L", + "CPU_BOOT_DONE","PMBUS_GNT_L", + "CHASSIS_PWR_BRK_L","PCIE_WAKE_L", + "PDB_THERM_OVERT_L","HMC_I2C2_FPGA_ALERT_L", + /*S0-S7*/ "","","SYS_BMC_PWRBTN_R_N","FM_TPM_PRSNT_1_N", + "FM_BMC_DEBUG_SW_N","UID_LED_N", + "SYS_FAULT_LED_N","RUN_POWER_FAULT_L", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "L2_RST_REQ_OUT_L","L0L1_RST_REQ_OUT_L", + "BMC_ID_BEEP_SEL","BMC_I2C0_FPGA_ALERT_L", + "SMB_BMC_TMP_ALERT","PWR_LED_N", + "SYS_RST_OUT_L","IRQ_TPM_SPI_N", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","RST_BMC_SELF_HW", + "FM_FLASH_LATCH_N","BMC_EMMC_RST_N", + "","","","", + /*Z0-Z7*/ "","","","","","","",""; +}; + +&io_expander0 { + gpio-line-names = + "FPGA_THERM_OVERT_L","FPGA_READY_BMC", + "HMC_BMC_DETECT","HMC_PGOOD", + "","BMC_SELF_PWR_CYCLE", + "FPGA_EROT_FATAL_ERROR_L","WP_HW_EXT_CTRL_L", + "EROT_FPGA_RST_L","FPGA_EROT_RECOVERY_L", + "BMC_EROT_FPGA_SPI_MUX_SEL","USB2_HUB_RESET_L", + "NCSI_CS1_SEL","SGPIO_EN_L", + "B2B_IOEXP_INT_L","I2C_BUS_MUX_RESET_L"; +}; + +&io_expander1 { + gpio-line-names = + "SEC_FPGA_THERM_OVERT_L","SEC_FPGA_READY_BMC", + "","", + "","", + "SEC_FPGA_EROT_FATAL_ERROR_L","SEC_WP_HW_EXT_CTRL_L", + "SEC_EROT_FPGA_RST_L","SEC_FPGA_EROT_RECOVERY_L", + "SEC_BMC_EROT_FPGA_SPI_MUX_SEL","", + "","", + "","SEC_I2C_BUS_MUX_RESET_L"; +}; + +&io_expander2 { + gpio-line-names = + "HMC_PRSNT_L","HMC_READY", + "HMC_EROT_FATAL_ERROR_L","I2C_MUX_SEL", + "HMC_EROT_SPI_MUX_SEL","HMC_EROT_RECOVERY_L", + "HMC_EROT_RST_L","GLOBAL_WP_HMC", + "FPGA_RST_L","USB2_HUB_RST", + "CPU_UART_MUX_SEL","", + "","","",""; +}; + +&io_expander3 { + gpio-line-names = + "RTC_MUX_SEL","PCI_MUX_SEL","TPM_MUX_SEL","FAN_MUX-SEL", + "SGMII_MUX_SEL","DP_MUX_SEL","UPHY3_USB_SEL","NCSI_MUX_SEL", + "BMC_PHY_RST","RTC_CLR_L","BMC_12V_CTRL","PS_RUN_IO0_PG", + "","","",""; +}; + +&io_expander4 { + gpio-line-names = + "stby_power_en_cpld","stby_power_gd_cpld","","", + "","","","", + "","","","", + "","","",""; +}; + +&io_expander5 { + gpio-line-names = + "JTAG_MUX_SEL","IOX_BMC_RESET","","", + "","","",""; +}; + +&io_expander6 { + gpio-line-names = + "OSFP_PHASE_ID0","OSFP_PHASE_ID1", + "OSFP_PHASE_ID2","OSFP_PHASE_ID3", + "","","","", + "OSFP_BOARD_ID0","OSFP_BOARD_ID1", + "OSFP_BOARD_ID2","PWRGD_P3V3_N1", + "PWRGD_P3V3_N2","","",""; +}; + +&io_expander7 { + gpio-line-names = + "RST_CX7_0","RST_CX7_1", + "CX0_SSD0_PRSNT_L","CX1_SSD1_PRSNT_L", + "CX_BOOT_CMPLT_CX0","CX_BOOT_CMPLT_CX1", + "CX_TWARN_CX0_L","CX_TWARN_CX1_L", + "CX_OVT_SHDN_CX0","CX_OVT_SHDN_CX1", + "FNP_L_CX0","FNP_L_CX1", + "","MCU_GPIO","MCU_RST_N","MCU_RECOVERY_N"; +}; + +&io_expander8 { + gpio-line-names = + "SEC_RST_CX7_0","SEC_RST_CX7_1", + "SEC_CX0_SSD0_PRSNT_L","SEC_CX1_SSD1_PRSNT_L", + "SEC_CX_BOOT_CMPLT_CX0","SEC_CX_BOOT_CMPLT_CX1", + "SEC_CX_TWARN_CX0_L","SEC_CX_TWARN_CX1_L", + "SEC_CX_OVT_SHDN_CX0","SEC_CX_OVT_SHDN_CX1", + "SEC_FNP_L_CX0","SEC_FNP_L_CX1", + "","SEC_MCU_GPIO","SEC_MCU_RST_N","SEC_MCU_RECOVERY_N"; +}; + +&io_expander9 { + gpio-line-names = + "LEAK3_DETECT_R","LEAK1_DETECT_R", + "LEAK2_DETECT_R","LEAK0_DETECT_R", + "CHASSIS3_LEAK_Q_N_PLD","CHASSIS1_LEAK_Q_N_PLD", + "CHASSIS2_LEAK_Q_N_PLD","CHASSIS0_LEAK_Q_N_PLD", + "P12V_AUX_FAN_ALERT_PLD_N","P12V_AUX_FAN_OC_PLD_N", + "P12V_AUX_FAN_FAULT_PLD_N","LEAK_DETECT_RMC_N_R", + "RSVD_RMC_GPIO3_R","SMB_RJ45_FIO_TMP_ALERT", + "",""; +}; + +&io_expander10 { + gpio-line-names = + "FM_P12V_NIC1_FLTB_R_N","FM_P3V3_NIC1_FAULT_R_N", + "OCP_V3_2_PWRBRK_FROM_HOST_ISO_PLD_N", + "P12V_AUX_NIC1_SENSE_ALERT_R_N", + "FM_P12V_NIC0_FLTB_R_N","FM_P3V3_NIC0_FAULT_R_N", + "OCP_SFF_PWRBRK_FROM_HOST_ISO_PLD_N", + "P12V_AUX_NIC0_SENSE_ALERT_R_N", + "P12V_AUX_PSU_SMB_ALERT_R_L","P12V_SCM_SENSE_ALERT_R_N", + "NODEB_PSU_SMB_ALERT_R_L","NODEA_PSU_SMB_ALERT_R_L", + "P52V_SENSE_ALERT_PLD_N","P48V_HS2_FAULT_N_PLD", + "P48V_HS1_FAULT_N_PLD",""; +}; + +&io_expander11 { + gpio-line-names = + "FAN_7_PRESENT_N","FAN_6_PRESENT_N", + "FAN_5_PRESENT_N","FAN_4_PRESENT_N", + "FAN_3_PRESENT_N","FAN_2_PRESENT_N", + "FAN_1_PRESENT_N","FAN_0_PRESENT_N", + "PRSNT_CHASSIS3_LEAK_CABLE_R_N","PRSNT_CHASSIS1_LEAK_CABLE_R_N", + "PRSNT_CHASSIS2_LEAK_CABLE_R_N","PRSNT_CHASSIS0_LEAK_CABLE_R_N", + "PRSNT_RJ45_FIO_N_R","PRSNT_HDDBD_POWER_CABLE_N", + "PRSNT_OSFP_POWER_CABLE_N",""; +}; + +&io_expander12 { + gpio-line-names = + "RST_OCP_V3_1_R_N","NIC0_PERST_N", + "OCP_SFF_PERST_FROM_HOST_ISO_PLD_N","OCP_SFF_MAIN_PWR_EN", + "FM_OCP_SFF_PWR_GOOD_PLD","OCP_SFF_AUX_PWR_PLD_EN_R", + "HP_LVC3_OCP_V3_1_PWRGD_PLD","HP_OCP_V3_1_HSC_PWRGD_PLD_R", + "RST_OCP_V3_2_R_N","NIC1_PERST_N", + "OCP_V3_2_PERST_FROM_HOST_ISO_PLD_N","OCP_V3_2_MAIN_PWR_EN", + "FM_OCP_V3_2_PWR_GOOD_PLD","OCP_V3_2_AUX_PWR_PLD_EN_R", + "HP_LVC3_OCP_V3_2_PWRGD_PLD","HP_OCP_V3_2_HSC_PWRGD_PLD_R"; +}; + +&io_expander13 { + gpio-line-names = + "NODEA_NODEB_PWOK_PLD_ISO_R","PWR_EN_NICS", + "PWRGD_P12V_AUX_FAN_PLD","P12V_AUX_FAN_EN_PLD", + "PWRGD_P3V3_AUX_PLD","PWRGD_P12V_AUX_PLD_ISO_R", + "FM_MAIN_PWREN_FROM_RMC_R","FM_MAIN_PWREN_RMC_EN_ISO_R", + "PWRGD_RMC_R","PWRGD_P12V_AUX_FAN_PLD", + "P12V_AUX_FAN_EN_PLD","FM_SYS_THROTTLE_N", + "HP_LVC3_OCP_V3_2_PRSNT2_PLD_N","HP_LVC3_OCP_V3_1_PRSNT2_PLD_N", + "",""; +}; + +&io_expander14 { + gpio-line-names = + "","","","","","","","", + "FM_BOARD_BMC_SKU_ID3","FM_BOARD_BMC_SKU_ID2", + "FM_BOARD_BMC_SKU_ID1","FM_BOARD_BMC_SKU_ID0", + "FAB_BMC_REV_ID2","FAB_BMC_REV_ID1", + "FAB_BMC_REV_ID0",""; +}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts index 998598c15fd0..49914a4a179f 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts @@ -201,7 +201,7 @@ &i2c12 { status = "okay"; temperature-sensor@4f { - compatible = "lm75"; + compatible = "national,lm75"; reg = <0x4f>; }; }; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts index c118d473a76f..cf3f807a38fe 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts @@ -20,10 +20,6 @@ i2c21 = &imux21; i2c22 = &imux22; i2c23 = &imux23; - i2c24 = &imux24; - i2c25 = &imux25; - i2c26 = &imux26; - i2c27 = &imux27; i2c28 = &imux28; i2c29 = &imux29; i2c30 = &imux30; @@ -70,19 +66,19 @@ }; }; - spi_gpio: spi-gpio { + spi_gpio: spi { status = "okay"; compatible = "spi-gpio"; #address-cells = <1>; #size-cells = <0>; - gpio-sck = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>; - gpio-mosi = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>; - gpio-miso = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>; + sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>; + miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>; num-chipselects = <1>; cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>; - tpmdev@0 { + tpm@0 { compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; spi-max-frequency = <33000000>; reg = <0>; @@ -137,7 +133,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii4_default>; use-ncsi; - mellanox,multi-host; }; &rtc { @@ -198,6 +193,35 @@ #address-cells = <1>; #size-cells = <0>; }; + + power-sensor@40 { + compatible = "ti,ina238"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + power-sensor@41 { + compatible = "ti,ina238"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + + power-sensor@44 { + compatible = "ti,ina238"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + + power-sensor@45 { + compatible = "ti,ina238"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + + temperature-sensor@4b { + compatible = "ti,tmp75"; + reg = <0x4b>; + }; }; &i2c1 { @@ -224,6 +248,35 @@ #address-cells = <1>; #size-cells = <0>; }; + + power-sensor@40 { + compatible = "ti,ina238"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + power-sensor@41 { + compatible = "ti,ina238"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + + power-sensor@44 { + compatible = "ti,ina238"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + + power-sensor@45 { + compatible = "ti,ina238"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + + temperature-sensor@4b { + compatible = "ti,tmp75"; + reg = <0x4b>; + }; }; &i2c3 { @@ -276,11 +329,15 @@ reg = <0x49>; }; - power-monitor@22 { - compatible = "lltc,ltc4286"; - reg = <0x22>; - adi,vrange-low-enable; - shunt-resistor-micro-ohms = <500>; + power-monitor@44 { + compatible = "lltc,ltc4287"; + reg = <0x44>; + shunt-resistor-micro-ohms = <250>; + }; + + power-monitor@40 { + compatible = "infineon,xdp710"; + reg = <0x40>; }; }; @@ -321,6 +378,14 @@ &i2c9 { status = "okay"; + mctp-controller; + multi-master; + + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; + gpio@30 { compatible = "nxp,pca9555"; reg = <0x30>; @@ -340,33 +405,6 @@ "","","",""; }; - i2c-mux@71 { - compatible = "nxp,pca9546"; - reg = <0x71>; - #address-cells = <1>; - #size-cells = <0>; - - imux24: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - imux25: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - imux26: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - imux27: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - }; // PTTV FRU eeprom@52 { compatible = "atmel,24c64"; @@ -376,6 +414,31 @@ &i2c11 { status = "okay"; + + gpio@30 { + compatible = "nxp,pca9555"; + reg = <0x30>; + gpio-controller; + #gpio-cells = <2>; + }; + gpio@31 { + compatible = "nxp,pca9555"; + reg = <0x31>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "","","","", + "","","presence-cmm","", + "","","","", + "","","",""; + }; + + // Aegis FRU + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; }; &i2c12 { @@ -399,6 +462,30 @@ #address-cells = <1>; #size-cells = <0>; reg = <0>; + power-monitor@61 { + compatible = "isil,isl69260"; + reg = <0x61>; + }; + power-monitor@62 { + compatible = "isil,isl69260"; + reg = <0x62>; + }; + power-monitor@63 { + compatible = "isil,isl69260"; + reg = <0x63>; + }; + power-monitor@64 { + compatible = "infineon,xdpe152c4"; + reg = <0x64>; + }; + power-monitor@66 { + compatible = "infineon,xdpe152c4"; + reg = <0x66>; + }; + power-monitor@68 { + compatible = "infineon,xdpe152c4"; + reg = <0x68>; + }; }; imux29: i2c@1 { #address-cells = <1>; @@ -497,13 +584,14 @@ /*O0-O7*/ "","","","","","","","", /*P0-P7*/ "power-button","power-host-control", "reset-button","","led-power","","","", - /*Q0-Q7*/ "","","","","","","","", + /*Q0-Q7*/ "","","","","","power-chassis-control","","", /*R0-R7*/ "","","","","","","","", /*S0-S7*/ "","","","","","","","", /*T0-T7*/ "","","","","","","","", /*U0-U7*/ "","","","","","","led-identify-gate","", /*V0-V7*/ "","","","", - "rtc-battery-voltage-read-enable","","","", + "rtc-battery-voltage-read-enable","", + "power-chassis-good","", /*W0-W7*/ "","","","","","","","", /*X0-X7*/ "","","","","","","","", /*Y0-Y7*/ "","","","","","","","", @@ -521,7 +609,6 @@ &sgpiom0 { status = "okay"; - max-ngpios = <128>; ngpios = <128>; bus-frequency = <2000000>; gpio-line-names = diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts index 942e53d5c714..41e2246cfbd1 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts @@ -11,7 +11,8 @@ compatible = "facebook,minerva-cmc", "aspeed,ast2600"; aliases { - serial5 = &uart5; + serial4 = &uart5; + serial5 = &uart6; /* * PCA9548 (2-0077) provides 8 channels connecting to * 6 pcs of FCB (Fan Controller Board). @@ -22,6 +23,8 @@ i2c19 = &imux19; i2c20 = &imux20; i2c21 = &imux21; + + spi1 = &spi_gpio; }; chosen { @@ -43,11 +46,54 @@ leds { compatible = "gpio-leds"; - led-fan-fault { - label = "led-fan-fault"; + led-0 { + label = "bmc_heartbeat_amber"; + gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + led-1 { + label = "fp_id_amber"; + default-state = "off"; + gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>; + }; + + led-2 { + label = "power_blue"; + default-state = "off"; + gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>; + }; + + led-3 { + label = "fan_status_led"; gpios = <&leds_gpio 9 GPIO_ACTIVE_HIGH>; default-state = "off"; }; + + led-4 { + label = "fan_fault_led_n"; + gpios = <&leds_gpio 10 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + spi_gpio: spi { + status = "okay"; + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>; + miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>; + + tpm@0 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + spi-max-frequency = <33000000>; + reg = <0>; + }; }; }; @@ -77,6 +123,10 @@ }; }; +&mdio3 { + status = "okay"; +}; + &fmc { status = "okay"; flash@0 { @@ -94,10 +144,6 @@ }; }; -&rtc { - status = "okay"; -}; - &sgpiom0 { status = "okay"; ngpios = <128>; @@ -119,14 +165,15 @@ shunt-resistor = <1000>; }; - power-monitor@67 { - compatible = "adi,ltc2945"; - reg = <0x67>; + power-monitor@44 { + compatible = "lltc,ltc4287"; + reg = <0x44>; + shunt-resistor-micro-ohms = <2000>; }; - power-monitor@68 { - compatible = "adi,ltc2945"; - reg = <0x68>; + power-monitor@43 { + compatible = "infineon,xdp710"; + reg = <0x43>; }; leds_gpio: gpio@19 { @@ -145,9 +192,9 @@ reg = <0x4b>; }; - temperature-sensor@48 { + temperature-sensor@4f { compatible = "ti,tmp75"; - reg = <0x48>; + reg = <0x4f>; }; eeprom@54 { @@ -182,6 +229,35 @@ #address-cells = <1>; #size-cells = <0>; }; + + power-sensor@40 { + compatible = "ti,ina238"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + power-sensor@41 { + compatible = "ti,ina238"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + + power-sensor@44 { + compatible = "ti,ina238"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + + power-sensor@45 { + compatible = "ti,ina238"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + + temperature-sensor@4b { + compatible = "ti,tmp75"; + reg = <0x4b>; + }; }; imux17: i2c@1 { @@ -200,6 +276,35 @@ #address-cells = <1>; #size-cells = <0>; }; + + power-sensor@40 { + compatible = "ti,ina238"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + power-sensor@41 { + compatible = "ti,ina238"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + + power-sensor@44 { + compatible = "ti,ina238"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + + power-sensor@45 { + compatible = "ti,ina238"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + + temperature-sensor@4b { + compatible = "ti,tmp75"; + reg = <0x4b>; + }; }; imux18: i2c@2 { @@ -218,6 +323,35 @@ #address-cells = <1>; #size-cells = <0>; }; + + power-sensor@40 { + compatible = "ti,ina238"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + power-sensor@41 { + compatible = "ti,ina238"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + + power-sensor@44 { + compatible = "ti,ina238"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + + power-sensor@45 { + compatible = "ti,ina238"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + + temperature-sensor@4b { + compatible = "ti,tmp75"; + reg = <0x4b>; + }; }; imux19: i2c@3 { @@ -236,9 +370,38 @@ #address-cells = <1>; #size-cells = <0>; }; + + power-sensor@40 { + compatible = "ti,ina238"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + power-sensor@41 { + compatible = "ti,ina238"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + + power-sensor@44 { + compatible = "ti,ina238"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + + power-sensor@45 { + compatible = "ti,ina238"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + + temperature-sensor@4b { + compatible = "ti,tmp75"; + reg = <0x4b>; + }; }; - imux20: i2c@4 { + imux20: i2c@5 { #address-cells = <1>; #size-cells = <0>; reg = <4>; @@ -254,9 +417,37 @@ #address-cells = <1>; #size-cells = <0>; }; + + power-sensor@40 { + compatible = "ti,ina238"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + power-sensor@41 { + compatible = "ti,ina238"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + + power-sensor@44 { + compatible = "ti,ina238"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + + power-sensor@45 { + compatible = "ti,ina238"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + temperature-sensor@4b { + compatible = "ti,tmp75"; + reg = <0x4b>; + }; }; - imux21: i2c@5 { + imux21: i2c@4 { #address-cells = <1>; #size-cells = <0>; reg = <5>; @@ -272,6 +463,34 @@ #address-cells = <1>; #size-cells = <0>; }; + + power-sensor@40 { + compatible = "ti,ina238"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + power-sensor@41 { + compatible = "ti,ina238"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + + power-sensor@44 { + compatible = "ti,ina238"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + + power-sensor@45 { + compatible = "ti,ina238"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + temperature-sensor@4b { + compatible = "ti,tmp75"; + reg = <0x4b>; + }; }; }; }; @@ -302,14 +521,16 @@ &i2c9 { status = "okay"; -}; -&i2c10 { - status = "okay"; -}; + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; -&i2c11 { - status = "okay"; + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; }; &i2c12 { @@ -338,6 +559,11 @@ compatible = "atmel,24c128"; reg = <0x50>; }; + + eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + }; }; &adc0 { @@ -355,6 +581,10 @@ pinctrl-0 = <&pinctrl_adc10_default>; }; +&ehci0 { + status = "okay"; +}; + &ehci1 { status = "okay"; }; @@ -381,12 +611,12 @@ /*N0-N7*/ "","","","","","","","", /*O0-O7*/ "","","","","","","","", /*P0-P7*/ "","","","","","","","", - /*Q0-Q7*/ "","","","","","","","", + /*Q0-Q7*/ "","","","","","power-chassis-control","","", /*R0-R7*/ "","","","","","","","", - /*S0-S7*/ "","","","","","","","", + /*S0-S7*/ "","","","","","","","host0-ready", /*T0-T7*/ "","","","","","","","", /*U0-U7*/ "","","","","","","","", - /*V0-V7*/ "","","","","BAT_DETECT","","","", + /*V0-V7*/ "","","","","BAT_DETECT","","power-chassis-good","", /*W0-W7*/ "","","","","","","","", /*X0-X7*/ "","","BLADE_UART_SEL3","","","","","", /*Y0-Y7*/ "","","","","","","","", @@ -397,118 +627,118 @@ gpio-line-names = /*"input pin","output pin"*/ /*A0 - A7*/ - "PRSNT_MTIA_BLADE0_N","PWREN_MTIA_BLADE0_EN", - "PRSNT_MTIA_BLADE1_N","PWREN_MTIA_BLADE1_EN", - "PRSNT_MTIA_BLADE2_N","PWREN_MTIA_BLADE2_EN", - "PRSNT_MTIA_BLADE3_N","PWREN_MTIA_BLADE3_EN", - "PRSNT_MTIA_BLADE4_N","PWREN_MTIA_BLADE4_EN", - "PRSNT_MTIA_BLADE5_N","PWREN_MTIA_BLADE5_EN", - "PRSNT_MTIA_BLADE6_N","PWREN_MTIA_BLADE6_EN", - "PRSNT_MTIA_BLADE7_N","PWREN_MTIA_BLADE7_EN", + "PRSNT_MTIA_BLADE0_N","PWREN_MTIA_BLADE0_EN_N", + "PRSNT_MTIA_BLADE1_N","PWREN_MTIA_BLADE1_EN_N", + "PRSNT_MTIA_BLADE2_N","PWREN_MTIA_BLADE2_EN_N", + "PRSNT_MTIA_BLADE3_N","PWREN_MTIA_BLADE3_EN_N", + "PRSNT_MTIA_BLADE4_N","PWREN_MTIA_BLADE4_EN_N", + "PRSNT_MTIA_BLADE5_N","PWREN_MTIA_BLADE5_EN_N", + "PRSNT_MTIA_BLADE6_N","PWREN_MTIA_BLADE6_EN_N", + "PRSNT_MTIA_BLADE7_N","PWREN_MTIA_BLADE7_EN_N", /*B0 - B7*/ - "PRSNT_MTIA_BLADE8_N","PWREN_MTIA_BLADE8_EN", - "PRSNT_MTIA_BLADE9_N","PWREN_MTIA_BLADE9_EN", - "PRSNT_MTIA_BLADE10_N","PWREN_MTIA_BLADE10_EN", - "PRSNT_MTIA_BLADE11_N","PWREN_MTIA_BLADE11_EN", - "PRSNT_MTIA_BLADE12_N","PWREN_MTIA_BLADE12_EN", - "PRSNT_MTIA_BLADE13_N","PWREN_MTIA_BLADE13_EN", - "PRSNT_MTIA_BLADE14_N","PWREN_MTIA_BLADE14_EN", - "PRSNT_MTIA_BLADE15_N","PWREN_MTIA_BLADE15_EN", + "PRSNT_MTIA_BLADE8_N","PWREN_MTIA_BLADE8_EN_N", + "PRSNT_MTIA_BLADE9_N","PWREN_MTIA_BLADE9_EN_N", + "PRSNT_MTIA_BLADE10_N","PWREN_MTIA_BLADE10_EN_N", + "PRSNT_MTIA_BLADE11_N","PWREN_MTIA_BLADE11_EN_N", + "PRSNT_MTIA_BLADE12_N","PWREN_MTIA_BLADE12_EN_N", + "PRSNT_MTIA_BLADE13_N","PWREN_MTIA_BLADE13_EN_N", + "PRSNT_MTIA_BLADE14_N","PWREN_MTIA_BLADE14_EN_N", + "PRSNT_MTIA_BLADE15_N","PWREN_MTIA_BLADE15_EN_N", /*C0 - C7*/ - "PRSNT_NW_BLADE0_N","PWREN_NW_BLADE0_EN", - "PRSNT_NW_BLADE1_N","PWREN_NW_BLADE1_EN", - "PRSNT_NW_BLADE2_N","PWREN_NW_BLADE2_EN", - "PRSNT_NW_BLADE3_N","PWREN_NW_BLADE3_EN", - "PRSNT_NW_BLADE4_N","PWREN_NW_BLADE4_EN", - "PRSNT_NW_BLADE5_N","PWREN_NW_BLADE5_EN", - "PRSNT_FCB_TOP_0_N","PWREN_MTIA_BLADE0_HSC_EN", - "PRSNT_FCB_TOP_1_N","PWREN_MTIA_BLADE1_HSC_EN", + "PRSNT_NW_BLADE0_N","PWREN_NW_BLADE0_EN_N", + "PRSNT_NW_BLADE1_N","PWREN_NW_BLADE1_EN_N", + "PRSNT_NW_BLADE2_N","PWREN_NW_BLADE2_EN_N", + "PRSNT_NW_BLADE3_N","PWREN_NW_BLADE3_EN_N", + "PRSNT_NW_BLADE4_N","PWREN_NW_BLADE4_EN_N", + "PRSNT_NW_BLADE5_N","PWREN_NW_BLADE5_EN_N", + "PRSNT_FCB_TOP_0_N","PWREN_MTIA_BLADE0_HSC_EN_N", + "PRSNT_FCB_TOP_1_N","PWREN_MTIA_BLADE1_HSC_EN_N", /*D0 - D7*/ - "PRSNT_FCB_MIDDLE_0_N","PWREN_MTIA_BLADE2_HSC_EN", - "PRSNT_FCB_MIDDLE_1_N","PWREN_MTIA_BLADE3_HSC_EN", - "PRSNT_FCB_BOTTOM_0_N","PWREN_MTIA_BLADE4_HSC_EN", - "PRSNT_FCB_BOTTOM_1_N","PWREN_MTIA_BLADE5_HSC_EN", - "PWRGD_MTIA_BLADE0_PWROK_L_BUF","PWREN_MTIA_BLADE6_HSC_EN", - "PWRGD_MTIA_BLADE1_PWROK_L_BUF","PWREN_MTIA_BLADE7_HSC_EN", - "PWRGD_MTIA_BLADE2_PWROK_L_BUF","PWREN_MTIA_BLADE8_HSC_EN", - "PWRGD_MTIA_BLADE3_PWROK_L_BUF","PWREN_MTIA_BLADE9_HSC_EN", + "PRSNT_FCB_MIDDLE_0_N","PWREN_MTIA_BLADE2_HSC_EN_N", + "PRSNT_FCB_MIDDLE_1_N","PWREN_MTIA_BLADE3_HSC_EN_N", + "PRSNT_FCB_BOTTOM_1_N","PWREN_MTIA_BLADE4_HSC_EN_N", + "PRSNT_FCB_BOTTOM_0_N","PWREN_MTIA_BLADE5_HSC_EN_N", + "PWRGD_MTIA_BLADE0_PWROK_N","PWREN_MTIA_BLADE6_HSC_EN_N", + "PWRGD_MTIA_BLADE1_PWROK_N","PWREN_MTIA_BLADE7_HSC_EN_N", + "PWRGD_MTIA_BLADE2_PWROK_N","PWREN_MTIA_BLADE8_HSC_EN_N", + "PWRGD_MTIA_BLADE3_PWROK_N","PWREN_MTIA_BLADE9_HSC_EN_N", /*E0 - E7*/ - "PWRGD_MTIA_BLADE4_PWROK_L_BUF","PWREN_MTIA_BLADE10_HSC_EN", - "PWRGD_MTIA_BLADE5_PWROK_L_BUF","PWREN_MTIA_BLADE11_HSC_EN", - "PWRGD_MTIA_BLADE6_PWROK_L_BUF","PWREN_MTIA_BLADE12_HSC_EN", - "PWRGD_MTIA_BLADE7_PWROK_L_BUF","PWREN_MTIA_BLADE13_HSC_EN", - "PWRGD_MTIA_BLADE8_PWROK_L_BUF","PWREN_MTIA_BLADE14_HSC_EN", - "PWRGD_MTIA_BLADE9_PWROK_L_BUF","PWREN_MTIA_BLADE15_HSC_EN", - "PWRGD_MTIA_BLADE10_PWROK_L_BUF","PWREN_NW_BLADE0_HSC_EN", - "PWRGD_MTIA_BLADE11_PWROK_L_BUF","PWREN_NW_BLADE1_HSC_EN", + "PWRGD_MTIA_BLADE4_PWROK_N","PWREN_MTIA_BLADE10_HSC_EN_N", + "PWRGD_MTIA_BLADE5_PWROK_N","PWREN_MTIA_BLADE11_HSC_EN_N", + "PWRGD_MTIA_BLADE6_PWROK_N","PWREN_MTIA_BLADE12_HSC_EN_N", + "PWRGD_MTIA_BLADE7_PWROK_N","PWREN_MTIA_BLADE13_HSC_EN_N", + "PWRGD_MTIA_BLADE8_PWROK_N","PWREN_MTIA_BLADE14_HSC_EN_N", + "PWRGD_MTIA_BLADE9_PWROK_N","PWREN_MTIA_BLADE15_HSC_EN_N", + "PWRGD_MTIA_BLADE10_PWROK_N","PWREN_NW_BLADE0_HSC_EN_N", + "PWRGD_MTIA_BLADE11_PWROK_N","PWREN_NW_BLADE1_HSC_EN_N", /*F0 - F7*/ - "PWRGD_MTIA_BLADE12_PWROK_L_BUF","PWREN_NW_BLADE2_HSC_EN", - "PWRGD_MTIA_BLADE13_PWROK_L_BUF","PWREN_NW_BLADE3_HSC_EN", - "PWRGD_MTIA_BLADE14_PWROK_L_BUF","PWREN_NW_BLADE4_HSC_EN", - "PWRGD_MTIA_BLADE15_PWROK_L_BUF","PWREN_NW_BLADE5_HSC_EN", - "PWRGD_NW_BLADE0_PWROK_L_BUF","PWREN_FCB_TOP_L_EN", - "PWRGD_NW_BLADE1_PWROK_L_BUF","PWREN_FCB_TOP_R_EN", - "PWRGD_NW_BLADE2_PWROK_L_BUF","PWREN_FCB_MIDDLE_L_EN", - "PWRGD_NW_BLADE3_PWROK_L_BUF","PWREN_FCB_MIDDLE_R_EN", + "PWRGD_MTIA_BLADE12_PWROK_N","PWREN_NW_BLADE2_HSC_EN_N", + "PWRGD_MTIA_BLADE13_PWROK_N","PWREN_NW_BLADE3_HSC_EN_N", + "PWRGD_MTIA_BLADE14_PWROK_N","PWREN_NW_BLADE4_HSC_EN_N", + "PWRGD_MTIA_BLADE15_PWROK_N","PWREN_NW_BLADE5_HSC_EN_N", + "PWRGD_NW_BLADE0_PWROK_N","PWREN_FCB_TOP_0_EN_N", + "PWRGD_NW_BLADE1_PWROK_N","PWREN_FCB_TOP_1_EN_N", + "PWRGD_NW_BLADE2_PWROK_N","PWREN_FCB_MIDDLE_0_EN_N", + "PWRGD_NW_BLADE3_PWROK_N","PWREN_FCB_MIDDLE_1_EN_N", /*G0 - G7*/ - "PWRGD_NW_BLADE4_PWROK_L_BUF","PWREN_FCB_BOTTOM_L_EN", - "PWRGD_NW_BLADE5_PWROK_L_BUF","PWREN_FCB_BOTTOM_R_EN", - "PWRGD_FCB_TOP_0_PWROK_L_BUF","FM_CMM_AC_CYCLE_N", - "PWRGD_FCB_TOP_1_PWROK_L_BUF","MGMT_SFP_TX_DIS", - "PWRGD_FCB_MIDDLE_0_PWROK_L_BUF","", - "PWRGD_FCB_MIDDLE_1_PWROK_L_BUF","RST_I2CRST_MTIA_BLADE0_1_N", - "PWRGD_FCB_BOTTOM_0_PWROK_L_BUF","RST_I2CRST_MTIA_BLADE2_3_N", - "PWRGD_FCB_BOTTOM_1_PWROK_L_BUF","RST_I2CRST_MTIA_BLADE4_5_N", + "PWRGD_NW_BLADE4_PWROK_N","PWREN_FCB_BOTTOM_1_EN_N", + "PWRGD_NW_BLADE5_PWROK_N","PWREN_FCB_BOTTOM_0_EN_N", + "PWRGD_FCB_TOP_0_PWROK_N","FM_CMM_AC_CYCLE_N", + "PWRGD_FCB_TOP_1_PWROK_N","MGMT_SFP_TX_DIS", + "PWRGD_FCB_MIDDLE_0_PWROK_N","FM_MDIO_SW_SEL", + "PWRGD_FCB_MIDDLE_1_PWROK_N","FM_P24V_SMPWR_EN", + "PWRGD_FCB_BOTTOM_1_PWROK_N","", + "PWRGD_FCB_BOTTOM_0_PWROK_N","", /*H0 - H7*/ - "LEAK_DETECT_MTIA_BLADE0_N_BUF","RST_I2CRST_MTIA_BLADE6_7_N", - "LEAK_DETECT_MTIA_BLADE1_N_BUF","RST_I2CRST_MTIA_BLADE8_9_N", - "LEAK_DETECT_MTIA_BLADE2_N_BUF","RST_I2CRST_MTIA_BLADE10_11_N", - "LEAK_DETECT_MTIA_BLADE3_N_BUF","RST_I2CRST_MTIA_BLADE12_13_N", - "LEAK_DETECT_MTIA_BLADE4_N_BUF","RST_I2CRST_MTIA_BLADE14_15_N", - "LEAK_DETECT_MTIA_BLADE5_N_BUF","RST_I2CRST_NW_BLADE0_1_2_N", - "LEAK_DETECT_MTIA_BLADE6_N_BUF","RST_I2CRST_NW_BLADE3_4_5_N", - "LEAK_DETECT_MTIA_BLADE7_N_BUF","RST_I2CRST_FCB_N", + "LEAK_DETECT_MTIA_BLADE0_N","", + "LEAK_DETECT_MTIA_BLADE1_N","", + "LEAK_DETECT_MTIA_BLADE2_N","", + "LEAK_DETECT_MTIA_BLADE3_N","", + "LEAK_DETECT_MTIA_BLADE4_N","", + "LEAK_DETECT_MTIA_BLADE5_N","", + "LEAK_DETECT_MTIA_BLADE6_N","", + "LEAK_DETECT_MTIA_BLADE7_N","", /*I0 - I7*/ - "LEAK_DETECT_MTIA_BLADE8_N_BUF","RST_I2CRST_FCB_B_L_N", - "LEAK_DETECT_MTIA_BLADE9_N_BUF","RST_I2CRST_FCB_B_R_N", - "LEAK_DETECT_MTIA_BLADE10_N_BUF","RST_I2CRST_FCB_M_L_N", - "LEAK_DETECT_MTIA_BLADE11_N_BUF","RST_I2CRST_FCB_M_R_N", - "LEAK_DETECT_MTIA_BLADE12_N_BUF","RST_I2CRST_FCB_T_L_N", - "LEAK_DETECT_MTIA_BLADE13_N_BUF","RST_I2CRST_FCB_T_R_N", - "LEAK_DETECT_MTIA_BLADE14_N_BUF","BMC_READY", - "LEAK_DETECT_MTIA_BLADE15_N_BUF","wFM_88E6393X_BIN_UPDATE_EN_N", + "LEAK_DETECT_MTIA_BLADE8_N","RST_I2CRST_FCB_BOTTOM_1_N", + "LEAK_DETECT_MTIA_BLADE9_N","RST_I2CRST_FCB_BOTTOM_0_N", + "LEAK_DETECT_MTIA_BLADE10_N","RST_I2CRST_FCB_MIDDLE_0_N", + "LEAK_DETECT_MTIA_BLADE11_N","RST_I2CRST_FCB_MIDDLE_1_N", + "LEAK_DETECT_MTIA_BLADE12_N","RST_I2CRST_FCB_TOP_0_N", + "LEAK_DETECT_MTIA_BLADE13_N","RST_I2CRST_FCB_TOP_1_N", + "LEAK_DETECT_MTIA_BLADE14_N","BMC_READY", + "LEAK_DETECT_MTIA_BLADE15_N","FM_88E6393X_BIN_UPDATE_EN_N", /*J0 - J7*/ - "LEAK_DETECT_NW_BLADE0_N_BUF","WATER_VALVE_CLOSED_N", - "LEAK_DETECT_NW_BLADE1_N_BUF","", - "LEAK_DETECT_NW_BLADE2_N_BUF","", - "LEAK_DETECT_NW_BLADE3_N_BUF","", - "LEAK_DETECT_NW_BLADE4_N_BUF","", - "LEAK_DETECT_NW_BLADE5_N_BUF","", - "MTIA_BLADE0_STATUS_LED","", - "MTIA_BLADE1_STATUS_LED","", + "LEAK_DETECT_NW_BLADE0_N","WATER_VALVE_CLOSED_N", + "LEAK_DETECT_NW_BLADE1_N","", + "LEAK_DETECT_NW_BLADE2_N","", + "LEAK_DETECT_NW_BLADE3_N","", + "LEAK_DETECT_NW_BLADE4_N","", + "LEAK_DETECT_NW_BLADE5_N","", + "PWRGD_MTIA_BLADE0_HSC_PWROK_N","", + "PWRGD_MTIA_BLADE1_HSC_PWROK_N","", /*K0 - K7*/ - "MTIA_BLADE2_STATUS_LED","", - "MTIA_BLADE3_STATUS_LED","", - "MTIA_BLADE4_STATUS_LED","", - "MTIA_BLADE5_STATUS_LED","", - "MTIA_BLADE6_STATUS_LED","", - "MTIA_BLADE7_STATUS_LED","", - "MTIA_BLADE8_STATUS_LED","", - "MTIA_BLADE9_STATUS_LED","", + "PWRGD_MTIA_BLADE2_HSC_PWROK_N","", + "PWRGD_MTIA_BLADE3_HSC_PWROK_N","", + "PWRGD_MTIA_BLADE4_HSC_PWROK_N","", + "PWRGD_MTIA_BLADE5_HSC_PWROK_N","", + "PWRGD_MTIA_BLADE6_HSC_PWROK_N","", + "PWRGD_MTIA_BLADE7_HSC_PWROK_N","", + "PWRGD_MTIA_BLADE8_HSC_PWROK_N","", + "PWRGD_MTIA_BLADE9_HSC_PWROK_N","", /*L0 - L7*/ - "MTIA_BLADE10_STATUS_LED","", - "MTIA_BLADE11_STATUS_LED","", - "MTIA_BLADE12_STATUS_LED","", - "MTIA_BLADE13_STATUS_LED","", - "MTIA_BLADE14_STATUS_LED","", - "MTIA_BLADE15_STATUS_LED","", - "NW_BLADE0_STATUS_LED","", - "NW_BLADE1_STATUS_LED","", + "PWRGD_MTIA_BLADE10_HSC_PWROK_N","", + "PWRGD_MTIA_BLADE11_HSC_PWROK_N","", + "PWRGD_MTIA_BLADE12_HSC_PWROK_N","", + "PWRGD_MTIA_BLADE13_HSC_PWROK_N","", + "PWRGD_MTIA_BLADE14_HSC_PWROK_N","", + "PWRGD_MTIA_BLADE15_HSC_PWROK_N","", + "PWRGD_NW_BLADE0_HSC_PWROK_N","", + "PWRGD_NW_BLADE1_HSC_PWROK_N","", /*M0 - M7*/ - "NW_BLADE2_STATUS_LED","", - "NW_BLADE3_STATUS_LED","", - "NW_BLADE4_STATUS_LED","", - "NW_BLADE5_STATUS_LED","", + "PWRGD_NW_BLADE2_HSC_PWROK_N","", + "PWRGD_NW_BLADE3_HSC_PWROK_N","", + "PWRGD_NW_BLADE4_HSC_PWROK_N","", + "PWRGD_NW_BLADE5_HSC_PWROK_N","", "RPU_READY","", "IT_GEAR_RPU_LINK_N","", "IT_GEAR_LEAK","", @@ -516,28 +746,28 @@ /*N0 - N7*/ "VALVE_STS0","", "VALVE_STS1","", - "VALVE_STS2","", - "VALVE_STS3","", - "CR_TOGGLE_BOOT_BUF_N","", - "CMM_LC_RDY_LED_N","", - "CMM_LC_UNRDY_LED_N","", + "PCA9555_IRQ0_N","", + "PCA9555_IRQ1_N","", + "CR_TOGGLE_BOOT_N","", + "IRQ_FCB_TOP0_N","", + "IRQ_FCB_TOP1_N","", "CMM_CABLE_CARTRIDGE_PRSNT_BOT_N","", /*O0 - O7*/ "CMM_CABLE_CARTRIDGE_PRSNT_TOP_N","", "BOT_BCB_CABLE_PRSNT_N","", "TOP_BCB_CABLE_PRSNT_N","", - "CHASSIS0_LEAK_Q_N","", - "CHASSIS1_LEAK_Q_N","", - "LEAK0_DETECT","", - "LEAK1_DETECT","", - "MGMT_SFP_PRSNT_N","", + "IRQ_FCB_MID0_N","", + "IRQ_FCB_MID1_N","", + "CHASSIS_LEAK0_DETECT_N","", + "CHASSIS_LEAK1_DETECT_N","", + "VALVE_RMON_A_1","", /*P0 - P7*/ - "MGMT_SFP_TX_FAULT","", - "MGMT_SFP_RX_LOS","", - "","", - "","", - "","", - "","", - "","", - "",""; + "VALVE_RMON_A_2","", + "VALVE_RMON_B_1","", + "VALVE_RMON_B_2","", + "RPU_READY_SPARE","", + "IT_GEAR_LEAK_SPARE","", + "IT_GEAR_RPU_LINK_SPARE_N","", + "IRQ_FCB_BOT0_N","", + "IRQ_FCB_BOT0_N",""; }; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge-4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge-4u.dts new file mode 100644 index 000000000000..839aad4ddd91 --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge-4u.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2024 IBM Corp. +/dts-v1/; + +#include "aspeed-bmc-ibm-blueridge.dts" + +/ { + model = "Blueridge 4U"; +}; + +&i2c3 { + power-supply@6a { + compatible = "ibm,cffps"; + reg = <0x6a>; + }; + + power-supply@6b { + compatible = "ibm,cffps"; + reg = <0x6b>; + }; +}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts new file mode 100644 index 000000000000..dfe5cc3edb52 --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts @@ -0,0 +1,1686 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2024 IBM Corp. +/dts-v1/; + +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/i2c/i2c.h> +#include <dt-bindings/leds/leds-pca955x.h> +#include "aspeed-g6.dtsi" +#include "ibm-power11-quad.dtsi" + +/ { + model = "Blueridge 2U"; + compatible = "ibm,blueridge-bmc", "aspeed,ast2600"; + + aliases { + serial4 = &uart5; + i2c16 = &i2c2mux0; + i2c17 = &i2c2mux1; + i2c18 = &i2c2mux2; + i2c19 = &i2c2mux3; + i2c20 = &i2c4mux0chn0; + i2c21 = &i2c4mux0chn1; + i2c22 = &i2c4mux0chn2; + i2c23 = &i2c5mux0chn0; + i2c24 = &i2c5mux0chn1; + i2c25 = &i2c6mux0chn0; + i2c26 = &i2c6mux0chn1; + i2c27 = &i2c6mux0chn2; + i2c28 = &i2c6mux0chn3; + i2c29 = &i2c11mux0chn0; + i2c30 = &i2c11mux0chn1; + }; + + chosen { + stdout-path = &uart5; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + event_log: region@b3d00000 { + reg = <0xb3d00000 0x100000>; + no-map; + }; + + ramoops@b3e00000 { + compatible = "ramoops"; + reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */ + record-size = <0x8000>; + console-size = <0x8000>; + ftrace-size = <0x8000>; + pmsg-size = <0x8000>; + max-reason = <3>; /* KMSG_DUMP_EMERG */ + }; + + /* LPC FW cycle bridge region requires natural alignment */ + flash_memory: region@b4000000 { + reg = <0xb4000000 0x04000000>; /* 64M */ + no-map; + }; + + /* VGA region is dictated by hardware strapping */ + vga_memory: region@bf000000 { + compatible = "shared-dma-pool"; + reg = <0xbf000000 0x01000000>; /* 16M */ + no-map; + }; + }; + + i2c-mux { + compatible = "i2c-mux-gpio"; + #address-cells = <1>; + #size-cells = <0>; + i2c-parent = <&i2c2>; + idle-state = <0>; + mux-gpios = <&gpio0 ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>, + <&gpio0 ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>; + + i2c2mux0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2mux1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2mux2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2mux3: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + leds { + compatible = "gpio-leds"; + + /* BMC Card fault LED at the back */ + led-bmc-ingraham0 { + gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>; + }; + + /* Enclosure ID LED at the back */ + led-rear-enc-id0 { + gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>; + }; + + /* Enclosure fault LED at the back */ + led-rear-enc-fault0 { + gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>; + }; + + /* PCIE slot power LED */ + led-pcieslot-power { + gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <1000>; + + event-fan0-presence { + gpios = <&pca0 6 GPIO_ACTIVE_LOW>; + label = "fan0-presence"; + linux,code = <6>; + }; + + event-fan1-presence { + gpios = <&pca0 7 GPIO_ACTIVE_LOW>; + label = "fan1-presence"; + linux,code = <7>; + }; + + event-fan2-presence { + gpios = <&pca0 8 GPIO_ACTIVE_LOW>; + label = "fan2-presence"; + linux,code = <8>; + }; + + event-fan3-presence { + gpios = <&pca0 9 GPIO_ACTIVE_LOW>; + label = "fan3-presence"; + linux,code = <9>; + }; + + event-fan4-presence { + gpios = <&pca0 10 GPIO_ACTIVE_LOW>; + label = "fan4-presence"; + linux,code = <10>; + }; + + event-fan5-presence { + gpios = <&pca0 11 GPIO_ACTIVE_LOW>; + label = "fan5-presence"; + linux,code = <11>; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc1 7>; + }; +}; + +&adc1 { + status = "okay"; + aspeed,int-vref-microvolt = <2500000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default + &pinctrl_adc10_default &pinctrl_adc11_default + &pinctrl_adc12_default &pinctrl_adc13_default + &pinctrl_adc14_default &pinctrl_adc15_default>; +}; + +&ehci1 { + status = "okay"; +}; + +&uhci { + status = "okay"; +}; + +&gpio0 { + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "bmc-management-ready","","","","","","checkstop","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","", + "factory-reset-toggle","", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "","bmc-ingraham0","rear-enc-id0","rear-enc-fault0","","","","", + /*I0-I7*/ "","","","","","","bmc-secure-boot","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","usb-power","","","","", + /*P0-P7*/ "","","","","pcieslot-power","","","", + /*Q0-Q7*/ "cfam-reset","","regulator-standby-faulted","","","","","", + /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","", + "", + /*S0-S7*/ "presence-ps0","presence-ps1","presence-ps2","presence-ps3", + "power-ffs-sync-history","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","",""; + + i2c3-mux-oe-n-hog { + gpio-hog; + gpios = <ASPEED_GPIO(G, 6) GPIO_ACTIVE_LOW>; + line-name = "I2C3_MUX_OE_N"; + output-high; + }; + + usb-power-hog { + gpio-hog; + gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>; + output-high; + }; +}; + +&emmc_controller { + status = "okay"; +}; + +&pinctrl_emmc_default { + bias-disable; +}; + +&emmc { + status = "okay"; + clk-phase-mmc-hs200 = <180>, <180>; +}; + +&ibt { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + gpio@20 { + compatible = "ti,tca9554"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = "", + "RUSSEL_FW_I2C_ENABLE_N", + "RUSSEL_OPPANEL_PRESENCE_N", + "BLYTH_OPPANEL_PRESENCE_N", + "CPU_TPM_CARD_PRESENT_N", + "DASD_BP2_PRESENT_N", + "DASD_BP1_PRESENT_N", + "DASD_BP0_PRESENT_N"; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + + power-supply@68 { + compatible = "ibm,cffps"; + reg = <0x68>; + }; + + power-supply@69 { + compatible = "ibm,cffps"; + reg = <0x69>; + }; + + led-controller@61 { + compatible = "nxp,pca9552"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLOT0_PRSNT_EN_RSVD", "SLOT1_PRSNT_EN_RSVD", + "SLOT2_PRSNT_EN_RSVD", "SLOT3_PRSNT_EN_RSVD", + "SLOT4_PRSNT_EN_RSVD", "SLOT0_EXPANDER_PRSNT_N", + "SLOT1_EXPANDER_PRSNT_N", "SLOT2_EXPANDER_PRSNT_N", + "SLOT3_EXPANDER_PRSNT_N", "SLOT4_EXPANDER_PRSNT_N", + "", "", "", "", "", ""; + }; +}; + +&i2c4 { + status = "okay"; + + temperature-sensor@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + temperature-sensor@49 { + compatible = "ti,tmp275"; + reg = <0x49>; + }; + + temperature-sensor@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; + + i2c-mux@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c4mux0chn0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + led-controller@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "cablecard0-cxp-top"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "cablecard0-cxp-bot"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + }; + + i2c4mux0chn1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + }; + + i2c4mux0chn2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; + }; + }; +}; + +&i2c5 { + status = "okay"; + + temperature-sensor@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + temperature-sensor@49 { + compatible = "ti,tmp275"; + reg = <0x49>; + }; + + i2c-mux@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c5mux0chn0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + led-controller@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "cablecard3-cxp-top"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "cablecard3-cxp-bot"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + }; + + i2c5mux0chn1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + led-controller@61 { + compatible = "nxp,pca9551"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "cablecard4-cxp-top"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "cablecard4-cxp-bot"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + }; + }; +}; + +&i2c6 { + status = "okay"; + + temperature-sensor@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + temperature-sensor@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; + + temperature-sensor@4b { + compatible = "ti,tmp275"; + reg = <0x4b>; + }; + + i2c-mux@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c6mux0chn0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + + i2c6mux0chn1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; + }; + + i2c6mux0chn2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + i2c6mux0chn3: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + }; + }; +}; + +&i2c7 { + multi-master; + status = "okay"; + + led-controller@30 { + compatible = "ibm,pca9552"; + reg = <0x30>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "pcieslot0"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "pcieslot1"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + reg = <2>; + default-state = "keep"; + label = "pcieslot2"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + reg = <3>; + default-state = "keep"; + label = "pcieslot3"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + reg = <4>; + default-state = "keep"; + label = "pcieslot4"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + reg = <5>; + default-state = "keep"; + label = "cpu1"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + reg = <6>; + default-state = "keep"; + label = "cpu-vrm1"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@8 { + reg = <8>; + default-state = "keep"; + label = "lcd-russel"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + + led-controller@31 { + compatible = "ibm,pca9552"; + reg = <0x31>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "ddimm0"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "ddimm1"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + reg = <2>; + default-state = "keep"; + label = "ddimm2"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + reg = <3>; + default-state = "keep"; + label = "ddimm3"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + reg = <4>; + default-state = "keep"; + label = "ddimm4"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + reg = <5>; + default-state = "keep"; + label = "ddimm5"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + reg = <6>; + default-state = "keep"; + label = "ddimm6"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@7 { + reg = <7>; + default-state = "keep"; + label = "ddimm7"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@8 { + reg = <8>; + default-state = "keep"; + label = "ddimm8"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@9 { + reg = <9>; + default-state = "keep"; + label = "ddimm9"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@10 { + reg = <10>; + default-state = "keep"; + label = "ddimm10"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@11 { + reg = <11>; + default-state = "keep"; + label = "ddimm11"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@12 { + reg = <12>; + default-state = "keep"; + label = "ddimm12"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@13 { + reg = <13>; + default-state = "keep"; + label = "ddimm13"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@14 { + reg = <14>; + default-state = "keep"; + label = "ddimm14"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@15 { + reg = <15>; + default-state = "keep"; + label = "ddimm15"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + + led-controller@32 { + compatible = "ibm,pca9552"; + reg = <0x32>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "ddimm16"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "ddimm17"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + reg = <2>; + default-state = "keep"; + label = "ddimm18"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + reg = <3>; + default-state = "keep"; + label = "ddimm19"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + reg = <4>; + default-state = "keep"; + label = "ddimm20"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + reg = <5>; + default-state = "keep"; + label = "ddimm21"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + reg = <6>; + default-state = "keep"; + label = "ddimm22"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@7 { + reg = <7>; + default-state = "keep"; + label = "ddimm23"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@8 { + reg = <8>; + default-state = "keep"; + label = "ddimm24"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@9 { + reg = <9>; + default-state = "keep"; + label = "ddimm25"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@10 { + reg = <10>; + default-state = "keep"; + label = "ddimm26"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@11 { + reg = <11>; + default-state = "keep"; + label = "ddimm27"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@12 { + reg = <12>; + default-state = "keep"; + label = "ddimm28"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@13 { + reg = <13>; + default-state = "keep"; + label = "ddimm29"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@14 { + reg = <14>; + default-state = "keep"; + label = "ddimm30"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@15 { + reg = <15>; + default-state = "keep"; + label = "ddimm31"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + + led-controller@33 { + compatible = "ibm,pca9552"; + reg = <0x33>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "planar"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "cpu0"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + reg = <3>; + default-state = "keep"; + label = "dasd-pyramid0"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + reg = <4>; + default-state = "keep"; + label = "dasd-pyramid1"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + reg = <5>; + default-state = "keep"; + label = "dasd-pyramid2"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + reg = <6>; + default-state = "keep"; + label = "cpu0-vrm0"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@7 { + reg = <7>; + default-state = "keep"; + label = "rtc-battery"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@8 { + reg = <8>; + default-state = "keep"; + label = "base-blyth"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@9 { + reg = <9>; + default-state = "keep"; + label = "pcieslot6"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@10 { + reg = <10>; + default-state = "keep"; + label = "pcieslot7"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@11 { + reg = <11>; + default-state = "keep"; + label = "pcieslot8"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@12 { + reg = <12>; + default-state = "keep"; + label = "pcieslot9"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@13 { + reg = <13>; + default-state = "keep"; + label = "pcieslot10"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@14 { + reg = <14>; + default-state = "keep"; + label = "pcieslot11"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@15 { + reg = <15>; + default-state = "keep"; + label = "tpm-wilson"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + + humidity-sensor@40 { + compatible = "silabs,si7020"; + reg = <0x40>; + }; + + temperature-sensor@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + pwm@52 { + compatible = "maxim,max31785a"; + reg = <0x52>; + }; + + led-controller@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "front-sys-id0"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "front-check-log0"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + reg = <2>; + default-state = "keep"; + label = "front-enc-fault1"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + reg = <3>; + default-state = "keep"; + label = "front-sys-pwron0"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + + pca0: led-controller@61 { + compatible = "nxp,pca9552"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "fan0"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "fan1"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + reg = <2>; + default-state = "keep"; + label = "fan2"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + reg = <3>; + default-state = "keep"; + label = "fan3"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + reg = <4>; + default-state = "keep"; + label = "fan4"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + reg = <5>; + default-state = "keep"; + label = "fan5"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + + lcd-controller@62 { + compatible = "ibm,op-panel"; + reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + pressure-sensor@76 { + compatible = "infineon,dps310"; + reg = <0x76>; + #io-channel-cells = <0>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; +}; + +&i2c8 { + status = "okay"; + + pmic@11 { + compatible = "ti,ucd90320"; + reg = <0x11>; + }; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; + + temperature-sensor@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + temperature-sensor@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + led-controller@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "power-config-full-load", ""; + }; + + led-controller@61 { + compatible = "nxp,pca9552"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLOT6_PRSNT_EN_RSVD", "SLOT7_PRSNT_EN_RSVD", + "SLOT8_PRSNT_EN_RSVD", "SLOT9_PRSNT_EN_RSVD", + "SLOT10_PRSNT_EN_RSVD", "SLOT11_PRSNT_EN_RSVD", + "SLOT6_EXPANDER_PRSNT_N", "SLOT7_EXPANDER_PRSNT_N", + "SLOT8_EXPANDER_PRSNT_N", "SLOT9_EXPANDER_PRSNT_N", + "SLOT10_EXPANDER_PRSNT_N", "SLOT11_EXPANDER_PRSNT_N", + "", "", "", ""; + }; + +}; + +&i2c9 { + status = "okay"; + + temperature-sensor@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + temperature-sensor@4d { + compatible = "ti,tmp423"; + reg = <0x4d>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; +}; + +&i2c10 { + status = "okay"; + + temperature-sensor@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + temperature-sensor@4d { + compatible = "ti,tmp423"; + reg = <0x4d>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; +}; + +&i2c11 { + status = "okay"; + + temperature-sensor@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + temperature-sensor@49 { + compatible = "ti,tmp275"; + reg = <0x49>; + }; + + i2c-mux@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c11mux0chn0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + led-controller@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "cablecard10-cxp-top"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "cablecard10-cxp-bot"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + }; + + i2c11mux0chn1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + }; + }; +}; + +&i2c12 { + status = "okay"; + + tpm@2e { + compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c"; + reg = <0x2e>; + memory-region = <&event_log>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; +}; + +&i2c13 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + led-controller@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "nvme0"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "nvme1"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + reg = <2>; + default-state = "keep"; + label = "nvme2"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + reg = <3>; + default-state = "keep"; + label = "nvme3"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + reg = <4>; + default-state = "keep"; + label = "nvme4"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + reg = <5>; + default-state = "keep"; + label = "nvme5"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + reg = <6>; + default-state = "keep"; + label = "nvme6"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@7 { + reg = <7>; + default-state = "keep"; + label = "nvme7"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; +}; + +&i2c14 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + led-controller@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "nvme8"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "nvme9"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + reg = <2>; + default-state = "keep"; + label = "nvme10"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + reg = <3>; + default-state = "keep"; + label = "nvme11"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + reg = <4>; + default-state = "keep"; + label = "nvme12"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + reg = <5>; + default-state = "keep"; + label = "nvme13"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + reg = <6>; + default-state = "keep"; + label = "nvme14"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@7 { + reg = <7>; + default-state = "keep"; + label = "nvme15"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; +}; + +&i2c15 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + led-controller@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "nvme16"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "nvme17"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + reg = <2>; + default-state = "keep"; + label = "nvme18"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + reg = <3>; + default-state = "keep"; + label = "nvme19"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + reg = <4>; + default-state = "keep"; + label = "nvme20"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + reg = <5>; + default-state = "keep"; + label = "nvme21"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + reg = <6>; + default-state = "keep"; + label = "nvme22"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@7 { + reg = <7>; + default-state = "keep"; + label = "nvme23"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; +}; + +&uart2 { + status = "okay"; +}; + +&vuart1 { + status = "okay"; +}; + +&vuart2 { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; +}; + +&mac2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii3_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>, + <&syscon ASPEED_CLK_MAC3RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&mac3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii4_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>, + <&syscon ASPEED_CLK_MAC4RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&wdt1 { + aspeed,reset-type = "none"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; +}; + +&wdt2 { + status = "okay"; +}; + +&kcs2 { + status = "okay"; + aspeed,lpc-io-reg = <0xca8 0xcac>; +}; + +&kcs3 { + status = "okay"; + aspeed,lpc-io-reg = <0xca2>; + aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>; +}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts index 6fdda42575df..7364adc6b80d 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts @@ -570,11 +570,6 @@ status = "okay"; }; -&xdma { - status = "okay"; - memory-region = <&vga_memory>; -}; - &kcs2 { status = "okay"; aspeed,lpc-io-reg = <0xca8 0xcac>; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts index 214b2e6a4c6d..513077a1f4be 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts @@ -2486,11 +2486,6 @@ status = "okay"; }; -&xdma { - status = "okay"; - memory-region = <&vga_memory>; -}; - &kcs2 { status = "okay"; aspeed,lpc-io-reg = <0xca8 0xcac>; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts new file mode 100644 index 000000000000..c24e464e5faa --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts @@ -0,0 +1,3876 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2024 IBM Corp. +/dts-v1/; + +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/i2c/i2c.h> +#include <dt-bindings/leds/leds-pca955x.h> +#include "aspeed-g6.dtsi" +#include "ibm-power11-quad.dtsi" + +/ { + model = "Fuji"; + compatible = "ibm,fuji-bmc", "aspeed,ast2600"; + + aliases { + i2c500 = &cfam4_i2c0; + i2c501 = &cfam4_i2c1; + i2c510 = &cfam4_i2c10; + i2c511 = &cfam4_i2c11; + i2c512 = &cfam4_i2c12; + i2c513 = &cfam4_i2c13; + i2c514 = &cfam4_i2c14; + i2c515 = &cfam4_i2c15; + i2c602 = &cfam5_i2c2; + i2c603 = &cfam5_i2c3; + i2c610 = &cfam5_i2c10; + i2c611 = &cfam5_i2c11; + i2c614 = &cfam5_i2c14; + i2c615 = &cfam5_i2c15; + i2c616 = &cfam5_i2c16; + i2c617 = &cfam5_i2c17; + i2c700 = &cfam6_i2c0; + i2c701 = &cfam6_i2c1; + i2c710 = &cfam6_i2c10; + i2c711 = &cfam6_i2c11; + i2c712 = &cfam6_i2c12; + i2c713 = &cfam6_i2c13; + i2c714 = &cfam6_i2c14; + i2c715 = &cfam6_i2c15; + i2c802 = &cfam7_i2c2; + i2c803 = &cfam7_i2c3; + i2c810 = &cfam7_i2c10; + i2c811 = &cfam7_i2c11; + i2c814 = &cfam7_i2c14; + i2c815 = &cfam7_i2c15; + i2c816 = &cfam7_i2c16; + i2c817 = &cfam7_i2c17; + + i2c16 = &i2c4mux0chn0; + i2c17 = &i2c4mux0chn1; + i2c18 = &i2c4mux0chn2; + i2c19 = &i2c5mux0chn0; + i2c20 = &i2c5mux0chn1; + i2c21 = &i2c5mux0chn2; + i2c22 = &i2c5mux0chn3; + i2c23 = &i2c6mux0chn0; + i2c24 = &i2c6mux0chn1; + i2c25 = &i2c6mux0chn2; + i2c26 = &i2c6mux0chn3; + i2c27 = &i2c14mux0chn0; + i2c28 = &i2c14mux0chn1; + i2c29 = &i2c14mux0chn2; + i2c30 = &i2c14mux0chn3; + i2c31 = &i2c14mux1chn0; + i2c32 = &i2c14mux1chn1; + i2c33 = &i2c14mux1chn2; + i2c34 = &i2c14mux1chn3; + i2c35 = &i2c15mux0chn0; + i2c36 = &i2c15mux0chn1; + i2c37 = &i2c15mux0chn2; + i2c38 = &i2c15mux0chn3; + i2c39 = &i2c15mux1chn0; + i2c40 = &i2c15mux1chn1; + i2c41 = &i2c15mux1chn2; + i2c42 = &i2c15mux1chn3; + i2c43 = &i2c15mux2chn0; + i2c44 = &i2c15mux2chn1; + i2c45 = &i2c15mux2chn2; + i2c46 = &i2c15mux2chn3; + i2c47 = &i2c8mux0chn0; + i2c48 = &i2c8mux0chn1; + + serial4 = &uart5; + + sbefifo500 = &sbefifo500; + sbefifo501 = &sbefifo501; + sbefifo510 = &sbefifo510; + sbefifo511 = &sbefifo511; + sbefifo512 = &sbefifo512; + sbefifo513 = &sbefifo513; + sbefifo514 = &sbefifo514; + sbefifo515 = &sbefifo515; + sbefifo602 = &sbefifo602; + sbefifo603 = &sbefifo603; + sbefifo610 = &sbefifo610; + sbefifo611 = &sbefifo611; + sbefifo614 = &sbefifo614; + sbefifo615 = &sbefifo615; + sbefifo616 = &sbefifo616; + sbefifo617 = &sbefifo617; + sbefifo700 = &sbefifo700; + sbefifo701 = &sbefifo701; + sbefifo710 = &sbefifo710; + sbefifo711 = &sbefifo711; + sbefifo712 = &sbefifo712; + sbefifo713 = &sbefifo713; + sbefifo714 = &sbefifo714; + sbefifo715 = &sbefifo715; + sbefifo802 = &sbefifo802; + sbefifo803 = &sbefifo803; + sbefifo810 = &sbefifo810; + sbefifo811 = &sbefifo811; + sbefifo814 = &sbefifo814; + sbefifo815 = &sbefifo815; + sbefifo816 = &sbefifo816; + sbefifo817 = &sbefifo817; + + scom500 = &scom500; + scom501 = &scom501; + scom510 = &scom510; + scom511 = &scom511; + scom512 = &scom512; + scom513 = &scom513; + scom514 = &scom514; + scom515 = &scom515; + scom602 = &scom602; + scom603 = &scom603; + scom610 = &scom610; + scom611 = &scom611; + scom614 = &scom614; + scom615 = &scom615; + scom616 = &scom616; + scom617 = &scom617; + scom700 = &scom700; + scom701 = &scom701; + scom710 = &scom710; + scom711 = &scom711; + scom712 = &scom712; + scom713 = &scom713; + scom714 = &scom714; + scom715 = &scom715; + scom802 = &scom802; + scom803 = &scom803; + scom810 = &scom810; + scom811 = &scom811; + scom814 = &scom814; + scom815 = &scom815; + scom816 = &scom816; + scom817 = &scom817; + + spi50 = &cfam4_spi0; + spi51 = &cfam4_spi1; + spi52 = &cfam4_spi2; + spi53 = &cfam4_spi3; + spi60 = &cfam5_spi0; + spi61 = &cfam5_spi1; + spi62 = &cfam5_spi2; + spi63 = &cfam5_spi3; + spi70 = &cfam6_spi0; + spi71 = &cfam6_spi1; + spi72 = &cfam6_spi2; + spi73 = &cfam6_spi3; + spi80 = &cfam7_spi0; + spi81 = &cfam7_spi1; + spi82 = &cfam7_spi2; + spi83 = &cfam7_spi3; + }; + + chosen { + stdout-path = &uart5; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + event_log: region@b3d00000 { + reg = <0xb3d00000 0x100000>; + no-map; + }; + + ramoops@b3e00000 { + compatible = "ramoops"; + reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */ + record-size = <0x8000>; + console-size = <0x8000>; + ftrace-size = <0x8000>; + pmsg-size = <0x8000>; + max-reason = <3>; /* KMSG_DUMP_EMERG */ + }; + + /* LPC FW cycle bridge region requires natural alignment */ + flash_memory: region@b4000000 { + reg = <0xb4000000 0x04000000>; /* 64M */ + no-map; + }; + + /* VGA region is dictated by hardware strapping */ + vga_memory: region@bf000000 { + compatible = "shared-dma-pool"; + reg = <0xbf000000 0x01000000>; /* 16M */ + no-map; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <1000>; + + event-fan0-presence { + gpios = <&pca0 15 GPIO_ACTIVE_LOW>; + label = "fan0-presence"; + linux,code = <15>; + }; + + event-fan1-presence { + gpios = <&pca0 14 GPIO_ACTIVE_LOW>; + label = "fan1-presence"; + linux,code = <14>; + }; + + event-fan2-presence { + gpios = <&pca0 13 GPIO_ACTIVE_LOW>; + label = "fan2-presence"; + linux,code = <13>; + }; + + event-fan3-presence { + gpios = <&pca0 12 GPIO_ACTIVE_LOW>; + label = "fan3-presence"; + linux,code = <12>; + }; + }; + + leds { + compatible = "gpio-leds"; + + /* RTC battery fault LED at the back */ + led-rtc-battery { + gpios = <&gpio0 ASPEED_GPIO(H, 0) GPIO_ACTIVE_LOW>; + }; + + /* BMC Card fault LED at the back */ + led-bmc { + gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>; + }; + + /* Enclosure Identify LED at the back */ + led-rear-enc-id0 { + gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>; + }; + + /* Enclosure fault LED at the back */ + led-rear-enc-fault0 { + gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>; + }; + + /* PCIE slot power LED */ + led-pcieslot-power { + gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc1 7>; + }; +}; + +&adc1 { + status = "okay"; + aspeed,int-vref-microvolt = <2500000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default + &pinctrl_adc10_default &pinctrl_adc11_default + &pinctrl_adc12_default &pinctrl_adc13_default + &pinctrl_adc14_default &pinctrl_adc15_default>; +}; + +&gpio0 { + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "bmc-management-ready","","","","","","checkstop","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","", + "factory-reset-toggle","", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "led-rtc-battery","led-bmc","led-rear-enc-id0","led-rear-enc-fault0","","", + "","", + /*I0-I7*/ "","","","","","","bmc-secure-boot","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","usb-power","","","","", + /*P0-P7*/ "","","","","led-pcieslot-power","","","", + /*Q0-Q7*/ "","","regulator-standby-faulted","","","","","", + /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","", + "I2C_FLASH_MICRO_N","","", + /*S0-S7*/ "","","","","power-ffs-sync-history","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","BMC_3RESTART_ATTEMPT_P","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","",""; + + usb-power-hog { + gpio-hog; + gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>; + output-high; + }; +}; + +&i2c0 { + status = "okay"; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + led-controller@62 { + compatible = "nxp,pca9552"; + reg = <0x62>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "presence-ps0", + "presence-ps1", + "presence-ps2", + "presence-ps3", + "presence-pdb", + "presence-tpm", + "", "", + "presence-cp0", + "presence-cp1", + "presence-cp2", + "presence-cp3", + "presence-dasd", + "presence-lcd-op", + "presence-base-op", + ""; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + + eeprom@54 { + compatible = "atmel,24c128"; + reg = <0x54>; + }; + + power-supply@68 { + compatible = "ibm,cffps"; + reg = <0x68>; + }; + + power-supply@69 { + compatible = "ibm,cffps"; + reg = <0x69>; + }; + + power-supply@6b { + compatible = "ibm,cffps"; + reg = <0x6b>; + }; + + power-supply@6d { + compatible = "ibm,cffps"; + reg = <0x6d>; + }; +}; + +&i2c4 { + status = "okay"; + + led-controller@65 { + compatible = "nxp,pca9552"; + reg = <0x65>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "presence-cable-card1", + "presence-cable-card2", + "presence-cable-card3", + "presence-cable-card4", + "presence-cable-card5", + "expander-cable-card1", + "expander-cable-card2", + "expander-cable-card3", + "expander-cable-card4", + "expander-cable-card5"; + }; + + i2c-mux@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c4mux0chn0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; + + led-controller@62 { + compatible = "nxp,pca9551"; + reg = <0x62>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "cablecard-c01-cxp-top"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "cablecard-c01-cxp-bot"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + }; + + i2c4mux0chn1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + led-controller@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "cablecard-c02-cxp-top"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "cablecard-c02-cxp-bot"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + }; + + i2c4mux0chn2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + led-controller@61 { + compatible = "nxp,pca9551"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "cablecard-c03-cxp-top"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "cablecard-c03-cxp-bot"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + }; + }; +}; + +&i2c5 { + status = "okay"; + + led-controller@66 { + compatible = "nxp,pca9552"; + reg = <0x66>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "presence-cable-card6", + "presence-cable-card7", + "presence-cable-card8", + "presence-cable-card9", + "presence-cable-card10", + "presence-cable-card11", + "expander-cable-card6", + "expander-cable-card7", + "expander-cable-card8", + "expander-cable-card9", + "expander-cable-card10", + "expander-cable-card11"; + }; + + i2c-mux@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c5mux0chn0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + led-controller@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "cablecard-c04-cxp-top"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "cablecard-c04-cxp-bot"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + }; + + i2c5mux0chn1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + led-controller@61 { + compatible = "nxp,pca9551"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "cablecard-c05-cxp-top"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "cablecard-c05-cxp-bot"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + }; + + i2c5mux0chn2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; + + led-controller@62 { + compatible = "nxp,pca9551"; + reg = <0x62>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "cablecard-c06-cxp-top"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "cablecard-c06-cxp-bot"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + }; + + i2c5mux0chn3: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + + led-controller@63 { + compatible = "nxp,pca9551"; + reg = <0x63>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "cablecard-c07-cxp-top"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "cablecard-c07-cxp-bot"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + }; + }; +}; + +&i2c6 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c6mux0chn0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + led-controller@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "cablecard-c08-cxp-top"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "cablecard-c08-cxp-bot"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + }; + + i2c6mux0chn1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; + + led-controller@62 { + compatible = "nxp,pca9551"; + reg = <0x62>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "cablecard-c09-cxp-top"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "cablecard-c09-cxp-bot"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + }; + + i2c6mux0chn2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + + led-controller@63 { + compatible = "nxp,pca9551"; + reg = <0x63>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "cablecard-c10-cxp-top"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "cablecard-c10-cxp-bot"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + }; + + i2c6mux0chn3: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + led-controller@61 { + compatible = "nxp,pca9551"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "cablecard-c11-cxp-top"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "cablecard-c11-cxp-bot"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + }; + }; + + led-controller@65 { + compatible = "nxp,pca9552"; + reg = <0x65>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "pcieslot-c01"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + reg = <2>; + default-state = "keep"; + label = "pcieslot-c02"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + reg = <3>; + default-state = "keep"; + label = "pcieslot-c03"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + reg = <4>; + default-state = "keep"; + label = "pcieslot-c04"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + reg = <5>; + default-state = "keep"; + label = "pcieslot-c05"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + reg = <6>; + default-state = "keep"; + label = "pcieslot-c06"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@7 { + reg = <7>; + default-state = "keep"; + label = "pcieslot-c07"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@8 { + reg = <8>; + default-state = "keep"; + label = "pcieslot-c08"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@9 { + reg = <9>; + default-state = "keep"; + label = "pcieslot-c09"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@10 { + reg = <10>; + default-state = "keep"; + label = "pcieslot-c10"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@11 { + reg = <11>; + default-state = "keep"; + label = "pcieslot-c11"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; +}; + +&i2c7 { + status = "okay"; + + led-controller@31 { + compatible = "ibm,pca9552"; + reg = <0x31>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "ddimm0"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "ddimm1"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + reg = <2>; + default-state = "keep"; + label = "ddimm2"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + reg = <3>; + default-state = "keep"; + label = "ddimm3"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + reg = <4>; + default-state = "keep"; + label = "ddimm4"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + reg = <5>; + default-state = "keep"; + label = "ddimm5"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + reg = <6>; + default-state = "keep"; + label = "ddimm6"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@7 { + reg = <7>; + default-state = "keep"; + label = "ddimm7"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@8 { + reg = <8>; + default-state = "keep"; + label = "ddimm8"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@9 { + reg = <9>; + default-state = "keep"; + label = "ddimm9"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@10 { + reg = <10>; + default-state = "keep"; + label = "ddimm10"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@11 { + reg = <11>; + default-state = "keep"; + label = "ddimm11"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@12 { + reg = <12>; + default-state = "keep"; + label = "ddimm12"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@13 { + reg = <13>; + default-state = "keep"; + label = "ddimm13"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@14 { + reg = <14>; + default-state = "keep"; + label = "ddimm14"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@15 { + reg = <15>; + default-state = "keep"; + label = "ddimm15"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + + led-controller@32 { + compatible = "ibm,pca9552"; + reg = <0x32>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "ddimm16"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "ddimm17"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + reg = <2>; + default-state = "keep"; + label = "ddimm18"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + reg = <3>; + default-state = "keep"; + label = "ddimm19"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + reg = <4>; + default-state = "keep"; + label = "ddimm20"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + reg = <5>; + default-state = "keep"; + label = "ddimm21"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + reg = <6>; + default-state = "keep"; + label = "ddimm22"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@7 { + reg = <7>; + default-state = "keep"; + label = "ddimm23"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@8 { + reg = <8>; + default-state = "keep"; + label = "ddimm24"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@9 { + reg = <9>; + default-state = "keep"; + label = "ddimm25"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@10 { + reg = <10>; + default-state = "keep"; + label = "ddimm26"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@11 { + reg = <11>; + default-state = "keep"; + label = "ddimm27"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@12 { + reg = <12>; + default-state = "keep"; + label = "ddimm28"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@13 { + reg = <13>; + default-state = "keep"; + label = "ddimm29"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@14 { + reg = <14>; + default-state = "keep"; + label = "ddimm30"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@15 { + reg = <15>; + default-state = "keep"; + label = "ddimm31"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + + led-controller@33 { + compatible = "ibm,pca9552"; + reg = <0x33>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "ddimm32"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "ddimm33"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + reg = <2>; + default-state = "keep"; + label = "ddimm34"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + reg = <3>; + default-state = "keep"; + label = "ddimm35"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + reg = <4>; + default-state = "keep"; + label = "ddimm36"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + reg = <5>; + default-state = "keep"; + label = "ddimm37"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + reg = <6>; + default-state = "keep"; + label = "ddimm38"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@7 { + reg = <7>; + default-state = "keep"; + label = "ddimm39"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@8 { + reg = <8>; + default-state = "keep"; + label = "ddimm40"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@9 { + reg = <9>; + default-state = "keep"; + label = "ddimm41"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@10 { + reg = <10>; + default-state = "keep"; + label = "ddimm42"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@11 { + reg = <11>; + default-state = "keep"; + label = "ddimm43"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@12 { + reg = <12>; + default-state = "keep"; + label = "ddimm44"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@13 { + reg = <13>; + default-state = "keep"; + label = "ddimm45"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@14 { + reg = <14>; + default-state = "keep"; + label = "ddimm46"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@15 { + reg = <15>; + default-state = "keep"; + label = "ddimm47"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + + led-controller@30 { + compatible = "ibm,pca9552"; + reg = <0x30>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "ddimm48"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "ddimm49"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + reg = <2>; + default-state = "keep"; + label = "ddimm50"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + reg = <3>; + default-state = "keep"; + label = "ddimm51"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + reg = <4>; + default-state = "keep"; + label = "ddimm52"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + reg = <5>; + default-state = "keep"; + label = "ddimm53"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + reg = <6>; + default-state = "keep"; + label = "ddimm54"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@7 { + reg = <7>; + default-state = "keep"; + label = "ddimm55"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@8 { + reg = <8>; + default-state = "keep"; + label = "ddimm56"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@9 { + reg = <9>; + default-state = "keep"; + label = "ddimm57"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@10 { + reg = <10>; + default-state = "keep"; + label = "ddimm58"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@11 { + reg = <11>; + default-state = "keep"; + label = "ddimm59"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@12 { + reg = <12>; + default-state = "keep"; + label = "ddimm60"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@13 { + reg = <13>; + default-state = "keep"; + label = "ddimm61"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@14 { + reg = <14>; + default-state = "keep"; + label = "ddimm62"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@15 { + reg = <15>; + default-state = "keep"; + label = "ddimm63"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + + led-controller@34 { + compatible = "ibm,pca9552"; + reg = <0x34>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "planar"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "tpm"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + reg = <2>; + default-state = "keep"; + label = "cpu3-c61"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + reg = <3>; + default-state = "keep"; + label = "cpu0-c14"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + reg = <4>; + default-state = "keep"; + label = "opencapi-connector3"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + reg = <5>; + default-state = "keep"; + label = "opencapi-connector4"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + reg = <6>; + default-state = "keep"; + label = "opencapi-connector5"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@8 { + reg = <8>; + default-state = "keep"; + label = "vrm4"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@9 { + reg = <9>; + default-state = "keep"; + label = "vrm5"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@10 { + reg = <10>; + default-state = "keep"; + label = "vrm6"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@11 { + reg = <11>; + default-state = "keep"; + label = "vrm7"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@12 { + reg = <12>; + default-state = "keep"; + label = "vrm12"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@13 { + reg = <13>; + default-state = "keep"; + label = "vrm13"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@14 { + reg = <14>; + default-state = "keep"; + label = "vrm14"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@15 { + reg = <15>; + default-state = "keep"; + label = "vrm15"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + + led-controller@35 { + compatible = "ibm,pca9552"; + reg = <0x35>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "dasd-backplane"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "power-distribution"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + reg = <2>; + default-state = "keep"; + label = "cpu1-c19"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + reg = <3>; + default-state = "keep"; + label = "cpu2-c56"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + reg = <4>; + default-state = "keep"; + label = "opencapi-connector0"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + reg = <5>; + default-state = "keep"; + label = "opencapi-connector1"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + reg = <6>; + default-state = "keep"; + label = "opencapi-connector2"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@8 { + reg = <8>; + default-state = "keep"; + label = "vrm0"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@9 { + reg = <9>; + default-state = "keep"; + label = "vrm1"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@10 { + reg = <10>; + default-state = "keep"; + label = "vrm2"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@11 { + reg = <11>; + default-state = "keep"; + label = "vrm3"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@12 { + reg = <12>; + default-state = "keep"; + label = "vrm8"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@13 { + reg = <13>; + default-state = "keep"; + label = "vrm9"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@14 { + reg = <14>; + default-state = "keep"; + label = "vrm10"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@15 { + reg = <15>; + default-state = "keep"; + label = "vrm11"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; +}; + +&i2c8 { + status = "okay"; + + pmic@11 { + compatible = "ti,ucd90320"; + reg = <0x11>; + }; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + i2c-mux@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + reset-gpio = <&gpio0 ASPEED_GPIO(S, 5) GPIO_ACTIVE_LOW>; + + i2c8mux0chn0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c8mux0chn1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&i2c9 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + eeprom@53 { + compatible = "atmel,24c128"; + reg = <0x53>; + }; + + eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + }; +}; + +&i2c10 { + status = "okay"; + + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + eeprom@53 { + compatible = "atmel,24c128"; + reg = <0x53>; + }; + + eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + }; +}; + +&i2c11 { + status = "okay"; + + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + eeprom@53 { + compatible = "atmel,24c128"; + reg = <0x53>; + }; + + eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + }; +}; + +&i2c12 { + status = "okay"; + + tpm@2e { + compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c"; + reg = <0x2e>; + memory-region = <&event_log>; + }; +}; + +&i2c13 { + status = "okay"; + + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + eeprom@53 { + compatible = "atmel,24c128"; + reg = <0x53>; + }; + + eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + }; +}; + +&i2c14 { + multi-master; + status = "okay"; + + lcd-controller@62 { + compatible = "ibm,op-panel"; + reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + i2c-mux@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + idle-state = <1>; + + i2c14mux0chn0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + i2c14mux0chn1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + }; + }; + + i2c14mux0chn2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + }; + + led-controller@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "front-sys-id0"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "front-check-log0"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + reg = <2>; + default-state = "keep"; + label = "front-enc-fault1"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + reg = <3>; + default-state = "keep"; + label = "front-sys-pwron0"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + }; + + i2c14mux0chn3: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + pwm@52 { + compatible = "maxim,max31785a"; + reg = <0x52>; + #address-cells = <1>; + #size-cells = <0>; + }; + + led-controller@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "nvme0"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "nvme1"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + reg = <2>; + default-state = "keep"; + label = "nvme2"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + reg = <3>; + default-state = "keep"; + label = "nvme3"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + reg = <4>; + default-state = "keep"; + label = "nvme4"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + reg = <5>; + default-state = "keep"; + label = "nvme5"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + reg = <6>; + default-state = "keep"; + label = "nvme6"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@7 { + reg = <7>; + default-state = "keep"; + label = "nvme7"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@8 { + reg = <8>; + default-state = "keep"; + label = "nvme8"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@9 { + reg = <9>; + default-state = "keep"; + label = "nvme9"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@10 { + reg = <10>; + default-state = "keep"; + label = "fan0"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@11 { + reg = <11>; + default-state = "keep"; + label = "fan1"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@12 { + reg = <12>; + default-state = "keep"; + label = "fan2"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + + led@13 { + reg = <13>; + default-state = "keep"; + label = "fan3"; + retain-state-shutdown; + type = <PCA955X_TYPE_LED>; + }; + }; + + pca0: led-controller@61 { + compatible = "nxp,pca9552"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x61>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "","","","", + "","","","", + "","","","", + "presence-fan3", + "presence-fan2", + "presence-fan1", + "presence-fan0"; + }; + }; + }; + + i2c-mux@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c14mux1chn0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + }; + }; + + i2c14mux1chn1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + }; + }; + + i2c14mux1chn2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + }; + }; + + i2c14mux1chn3: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + }; + }; + }; +}; + +&i2c15 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c15mux0chn0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + + i2c15mux0chn1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + + i2c15mux0chn2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + + i2c15mux0chn3: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + }; + + i2c-mux@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c15mux1chn0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + + i2c15mux1chn1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + + i2c15mux1chn2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + + i2c15mux1chn3: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + }; + + i2c-mux@72 { + compatible = "nxp,pca9546"; + reg = <0x72>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c15mux2chn0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + + i2c15mux2chn1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + + i2c15mux2chn2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c15mux2chn3: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&uhci { + status = "okay"; +}; + +&emmc_controller { + status = "okay"; +}; + +&pinctrl_emmc_default { + bias-disable; +}; + +&emmc { + status = "okay"; + clk-phase-mmc-hs200 = <210>, <228>; +}; + +&ibt { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&vuart1 { + status = "okay"; +}; + +&vuart2 { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; +}; + +&mac2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii3_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>, + <&syscon ASPEED_CLK_MAC3RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&mac3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii4_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>, + <&syscon ASPEED_CLK_MAC4RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&wdt1 { + aspeed,reset-type = "none"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; +}; + +&wdt2 { + status = "okay"; +}; + +&kcs2 { + status = "okay"; + aspeed,lpc-io-reg = <0xca8 0xcac>; +}; + +&kcs3 { + status = "okay"; + aspeed,lpc-io-reg = <0xca2>; + aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>; +}; + +&fsi_hub0 { + cfam@4,0 { /* DCM2_C0 */ + reg = <4 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <4>; + + scom@1000 { + compatible = "ibm,p9-scom"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,i2c-fsi"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam4_i2c0: i2c-bus@0 { + reg = <0>; /* OM01 */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom500: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo500: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam4_i2c1: i2c-bus@1 { + reg = <1>; /* OM23 */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom501: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo501: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam4_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom510: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo510: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam4_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom511: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo511: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam4_i2c12: i2c-bus@c { + reg = <12>; /* OP4A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom512: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo512: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam4_i2c13: i2c-bus@d { + reg = <13>; /* OP4B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom513: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo513: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam4_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom514: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo514: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam4_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom515: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo515: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + }; + + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam4_spi0: spi@0 { + compatible = "ibm,spi-fsi"; + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam4_spi1: spi@20 { + compatible = "ibm,spi-fsi"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam4_spi2: spi@40 { + compatible = "ibm,spi-fsi"; + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam4_spi3: spi@60 { + compatible = "ibm,spi-fsi"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + + occ { + compatible = "ibm,p10-occ"; + + hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; + }; + }; + + fsi@3400 { + compatible = "ibm,p9-fsi-controller"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + no-scan-on-init; + }; + }; + + cfam@5,0 { /* DCM2_C1 */ + reg = <5 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <5>; + + scom@1000 { + compatible = "ibm,p9-scom"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,i2c-fsi"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam5_i2c2: i2c-bus@2 { + reg = <2>; /* OM45 */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom602: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo602: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam5_i2c3: i2c-bus@3 { + reg = <3>; /* OM67 */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom603: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo603: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam5_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom610: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo610: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam5_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom611: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo611: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam5_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom614: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo614: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam5_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom615: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo615: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam5_i2c16: i2c-bus@10 { + reg = <16>; /* OP6A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom616: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo616: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam5_i2c17: i2c-bus@11 { + reg = <17>; /* OP6B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom617: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo617: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + }; + + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam5_spi0: spi@0 { + compatible = "ibm,spi-fsi"; + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam5_spi1: spi@20 { + compatible = "ibm,spi-fsi"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam5_spi2: spi@40 { + compatible = "ibm,spi-fsi"; + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam5_spi3: spi@60 { + compatible = "ibm,spi-fsi"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + + occ { + compatible = "ibm,p10-occ"; + + hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; + }; + }; + + fsi@3400 { + compatible = "ibm,p9-fsi-controller"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + no-scan-on-init; + }; + }; + + cfam@6,0 { /* DCM3_C0 */ + reg = <6 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <6>; + + scom@1000 { + compatible = "ibm,p9-scom"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,i2c-fsi"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam6_i2c0: i2c-bus@0 { + reg = <0>; /* OM01 */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom700: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo700: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam6_i2c1: i2c-bus@1 { + reg = <1>; /* OM23 */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom701: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo701: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam6_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom710: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo710: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam6_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom711: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo711: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam6_i2c12: i2c-bus@c { + reg = <12>; /* OP4A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom712: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo712: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam6_i2c13: i2c-bus@d { + reg = <13>; /* OP4B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom713: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo713: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam6_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom714: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo714: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam6_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom715: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo715: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + }; + + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam6_spi0: spi@0 { + compatible = "ibm,spi-fsi"; + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam6_spi1: spi@20 { + compatible = "ibm,spi-fsi"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam6_spi2: spi@40 { + compatible = "ibm,spi-fsi"; + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam6_spi3: spi@60 { + compatible = "ibm,spi-fsi"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + + occ { + compatible = "ibm,p10-occ"; + + hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; + }; + }; + + fsi@3400 { + compatible = "ibm,p9-fsi-controller"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + no-scan-on-init; + }; + }; + + cfam@7,0 { /* DCM3_C1 */ + reg = <7 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <7>; + + scom@1000 { + compatible = "ibm,p9-scom"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,i2c-fsi"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam7_i2c2: i2c-bus@2 { + reg = <2>; /* OM45 */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom802: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo802: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam7_i2c3: i2c-bus@3 { + reg = <3>; /* OM67 */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom803: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo803: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam7_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom810: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo810: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam7_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom811: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo811: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam7_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom814: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo814: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam7_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom815: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo815: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam7_i2c16: i2c-bus@10 { + reg = <16>; /* OP6A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom816: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo816: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam7_i2c17: i2c-bus@11 { + reg = <17>; /* OP6B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom817: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo817: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + }; + + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam7_spi0: spi@0 { + compatible = "ibm,spi-fsi"; + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam7_spi1: spi@20 { + compatible = "ibm,spi-fsi"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam7_spi2: spi@40 { + compatible = "ibm,spi-fsi"; + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam7_spi3: spi@60 { + compatible = "ibm,spi-fsi"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + + occ { + compatible = "ibm,p10-occ"; + + hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; + }; + }; + + fsi@3400 { + compatible = "ibm,p9-fsi-controller"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + no-scan-on-init; + }; + }; +}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts index 5cb0094e21e0..0776b72c2199 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts @@ -1722,11 +1722,6 @@ status = "okay"; }; -&xdma { - status = "okay"; - memory-region = <&vga_memory>; -}; - &kcs2 { status = "okay"; aspeed,lpc-io-reg = <0xca8 0xcac>; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts index dcbc16308ab5..f3efecc7eb8d 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts @@ -1138,7 +1138,7 @@ reg = <6>; temperature-sensor@4c { - compatible = "ti,tmp423"; + compatible = "ti,tmp432"; reg = <0x4c>; }; }; @@ -1599,7 +1599,7 @@ reg = <6>; temperature-sensor@4c { - compatible = "ti,tmp423"; + compatible = "ti,tmp432"; reg = <0x4c>; }; }; @@ -1615,7 +1615,7 @@ }; temperature-sensor@4c { - compatible = "ti,tmp423"; + compatible = "ti,tmp432"; reg = <0x4c>; }; }; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts index 0dea014e4f30..78a5656ef75d 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts @@ -814,10 +814,6 @@ memory-region = <&gfx_memory>; }; -&pinctrl { - aspeed,external-nodes = <&gfx &lhc>; -}; - &wdt1 { aspeed,reset-type = "none"; aspeed,external-signal; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-on5263m5.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-on5263m5.dts index 5a98a19f445e..7a78c34cff40 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-on5263m5.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-on5263m5.dts @@ -123,10 +123,6 @@ status = "okay"; }; -&pinctrl { - aspeed,external-nodes = <&gfx &lhc>; -}; - &pwm_tacho { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-intel-s2600wf.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-intel-s2600wf.dts index d5b7d28cda88..da55e7b29fac 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-intel-s2600wf.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-intel-s2600wf.dts @@ -118,10 +118,6 @@ status = "okay"; }; -&pinctrl { - aspeed,external-nodes = <&gfx &lhc>; -}; - &pwm_tacho { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts index c0847636f20b..370738572a55 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts @@ -263,10 +263,6 @@ status = "okay"; }; -&pinctrl { - aspeed,external-nodes = <&gfx &lhc>; -}; - &gpio { pin_gpio_b0 { gpio-hog; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts index ac0d666ca10e..b1d0ff85d397 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts @@ -284,10 +284,6 @@ memory-region = <&gfx_memory>; }; -&pinctrl { - aspeed,external-nodes = <&gfx &lhc>; -}; - &ibt { status = "okay"; }; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts index 893e621ecab1..24df24ad9c80 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts @@ -289,10 +289,6 @@ memory-region = <&gfx_memory>; }; -&pinctrl { - aspeed,external-nodes = <&gfx &lhc>; -}; - &pwm_tacho { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-swift.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-swift.dts index bbf864f84d37..a0e8c97e944a 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-swift.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-swift.dts @@ -938,10 +938,6 @@ memory-region = <&gfx_memory>; }; -&pinctrl { - aspeed,external-nodes = <&gfx &lhc>; -}; - &wdt1 { aspeed,reset-type = "none"; aspeed,external-signal; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts index 213023bc5aec..b31eb8e58c6b 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts @@ -870,11 +870,6 @@ <&pinctrl_lsirq_default>; }; -&xdma { - status = "okay"; - memory-region = <&vga_memory>; -}; - &kcs2 { status = "okay"; aspeed,lpc-io-reg = <0xca8 0xcac>; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts index a20a532fc280..8b1e82c8cdfe 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts @@ -661,10 +661,6 @@ memory-region = <&gfx_memory>; }; -&pinctrl { - aspeed,external-nodes = <&gfx &lhc>; -}; - &wdt1 { aspeed,reset-type = "none"; aspeed,external-signal; @@ -696,9 +692,4 @@ memory-region = <&video_engine_memory>; }; -&xdma { - status = "okay"; - memory-region = <&vga_memory>; -}; - #include "ibm-power9-dual.dtsi" diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts index 3d2d8db73ca6..9904f0a58cfa 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts @@ -466,8 +466,6 @@ }; &pinctrl { - aspeed,external-nodes = <&gfx &lhc>; - pinctrl_gpioh_unbiased: gpioi_unbiased { pins = "A8", "C7", "B7", "A7", "D7", "B6", "A6", "E7"; bias-disable; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-supermicro-x11spi.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-supermicro-x11spi.dts index 50f3c6a5c0c8..b961dff388d1 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-supermicro-x11spi.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-supermicro-x11spi.dts @@ -123,10 +123,6 @@ status = "okay"; }; -&pinctrl { - aspeed,external-nodes = <&gfx &lhc>; -}; - &pwm_tacho { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi index c669ec202085..78c967812492 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi @@ -122,8 +122,8 @@ reg = <0x1e6c0080 0x80>; }; - cvic: copro-interrupt-controller@1e6c2000 { - compatible = "aspeed,ast2400-cvic", "aspeed-cvic"; + cvic: interrupt-controller@1e6c2000 { + compatible = "aspeed,ast2400-cvic", "aspeed,cvic"; valid-sources = <0x7fffffff>; reg = <0x1e6c2000 0x80>; }; @@ -230,6 +230,9 @@ sram: sram@1e720000 { compatible = "mmio-sram"; reg = <0x1e720000 0x8000>; // 32K + ranges; + #address-cells = <1>; + #size-cells = <1>; }; video: video@1e700000 { diff --git a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi index 6e05cbcce49c..57a699a7c149 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi @@ -139,8 +139,8 @@ reg = <0x1e6c0080 0x80>; }; - cvic: copro-interrupt-controller@1e6c2000 { - compatible = "aspeed,ast2500-cvic", "aspeed-cvic"; + cvic: interrupt-controller@1e6c2000 { + compatible = "aspeed,ast2500-cvic", "aspeed,cvic"; valid-sources = <0xffffffff>; copro-sw-interrupts = <1>; reg = <0x1e6c2000 0x80>; @@ -281,17 +281,6 @@ interrupts = <0x19>; }; - xdma: xdma@1e6e7000 { - compatible = "aspeed,ast2500-xdma"; - reg = <0x1e6e7000 0x100>; - clocks = <&syscon ASPEED_CLK_GATE_BCLK>; - resets = <&syscon ASPEED_RESET_XDMA>; - interrupts-extended = <&vic 6>, <&scu_ic ASPEED_AST2500_SCU_IC_PCIE_RESET_LO_TO_HI>; - aspeed,pcie-device = "bmc"; - aspeed,scu = <&syscon>; - status = "disabled"; - }; - adc: adc@1e6e9000 { compatible = "aspeed,ast2500-adc"; reg = <0x1e6e9000 0xb0>; @@ -314,6 +303,9 @@ sram: sram@1e720000 { compatible = "mmio-sram"; reg = <0x1e720000 0x9000>; // 36K + ranges; + #address-cells = <1>; + #size-cells = <1>; }; sdmmc: sd-controller@1e740000 { diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi index 0c00882f111a..8ed715bd53aa 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi @@ -231,41 +231,33 @@ resets = <&syscon ASPEED_RESET_MII>; }; - mac0: ftgmac@1e660000 { + mac0: ethernet@1e660000 { compatible = "aspeed,ast2600-mac", "faraday,ftgmac100"; reg = <0x1e660000 0x180>; - #address-cells = <1>; - #size-cells = <0>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>; status = "disabled"; }; - mac1: ftgmac@1e680000 { + mac1: ethernet@1e680000 { compatible = "aspeed,ast2600-mac", "faraday,ftgmac100"; reg = <0x1e680000 0x180>; - #address-cells = <1>; - #size-cells = <0>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>; status = "disabled"; }; - mac2: ftgmac@1e670000 { + mac2: ethernet@1e670000 { compatible = "aspeed,ast2600-mac", "faraday,ftgmac100"; reg = <0x1e670000 0x180>; - #address-cells = <1>; - #size-cells = <0>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>; status = "disabled"; }; - mac3: ftgmac@1e690000 { + mac3: ethernet@1e690000 { compatible = "aspeed,ast2600-mac", "faraday,ftgmac100"; reg = <0x1e690000 0x180>; - #address-cells = <1>; - #size-cells = <0>; interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>; status = "disabled"; @@ -398,19 +390,6 @@ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; }; - xdma: xdma@1e6e7000 { - compatible = "aspeed,ast2600-xdma"; - reg = <0x1e6e7000 0x100>; - clocks = <&syscon ASPEED_CLK_GATE_BCLK>; - resets = <&syscon ASPEED_RESET_DEV_XDMA>, <&syscon ASPEED_RESET_RC_XDMA>; - reset-names = "device", "root-complex"; - interrupts-extended = <&gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, - <&scu_ic0 ASPEED_AST2600_SCU_IC0_PCIE_PERST_LO_TO_HI>; - aspeed,pcie-device = "bmc"; - aspeed,scu = <&syscon>; - status = "disabled"; - }; - adc0: adc@1e6e9000 { compatible = "aspeed,ast2600-adc0"; reg = <0x1e6e9000 0x100>; diff --git a/arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi b/arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi new file mode 100644 index 000000000000..68c941a194b6 --- /dev/null +++ b/arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi @@ -0,0 +1,1539 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2024 IBM Corp. + +/ { + aliases { + i2c100 = &cfam0_i2c0; + i2c101 = &cfam0_i2c1; + i2c110 = &cfam0_i2c10; + i2c111 = &cfam0_i2c11; + i2c112 = &cfam0_i2c12; + i2c113 = &cfam0_i2c13; + i2c114 = &cfam0_i2c14; + i2c115 = &cfam0_i2c15; + i2c202 = &cfam1_i2c2; + i2c203 = &cfam1_i2c3; + i2c210 = &cfam1_i2c10; + i2c211 = &cfam1_i2c11; + i2c214 = &cfam1_i2c14; + i2c215 = &cfam1_i2c15; + i2c216 = &cfam1_i2c16; + i2c217 = &cfam1_i2c17; + i2c300 = &cfam2_i2c0; + i2c301 = &cfam2_i2c1; + i2c310 = &cfam2_i2c10; + i2c311 = &cfam2_i2c11; + i2c312 = &cfam2_i2c12; + i2c313 = &cfam2_i2c13; + i2c314 = &cfam2_i2c14; + i2c315 = &cfam2_i2c15; + i2c402 = &cfam3_i2c2; + i2c403 = &cfam3_i2c3; + i2c410 = &cfam3_i2c10; + i2c411 = &cfam3_i2c11; + i2c414 = &cfam3_i2c14; + i2c415 = &cfam3_i2c15; + i2c416 = &cfam3_i2c16; + i2c417 = &cfam3_i2c17; + + sbefifo100 = &sbefifo100; + sbefifo101 = &sbefifo101; + sbefifo110 = &sbefifo110; + sbefifo111 = &sbefifo111; + sbefifo112 = &sbefifo112; + sbefifo113 = &sbefifo113; + sbefifo114 = &sbefifo114; + sbefifo115 = &sbefifo115; + sbefifo202 = &sbefifo202; + sbefifo203 = &sbefifo203; + sbefifo210 = &sbefifo210; + sbefifo211 = &sbefifo211; + sbefifo214 = &sbefifo214; + sbefifo215 = &sbefifo215; + sbefifo216 = &sbefifo216; + sbefifo217 = &sbefifo217; + sbefifo300 = &sbefifo300; + sbefifo301 = &sbefifo301; + sbefifo310 = &sbefifo310; + sbefifo311 = &sbefifo311; + sbefifo312 = &sbefifo312; + sbefifo313 = &sbefifo313; + sbefifo314 = &sbefifo314; + sbefifo315 = &sbefifo315; + sbefifo402 = &sbefifo402; + sbefifo403 = &sbefifo403; + sbefifo410 = &sbefifo410; + sbefifo411 = &sbefifo411; + sbefifo414 = &sbefifo414; + sbefifo415 = &sbefifo415; + sbefifo416 = &sbefifo416; + sbefifo417 = &sbefifo417; + + scom100 = &scom100; + scom101 = &scom101; + scom110 = &scom110; + scom111 = &scom111; + scom112 = &scom112; + scom113 = &scom113; + scom114 = &scom114; + scom115 = &scom115; + scom202 = &scom202; + scom203 = &scom203; + scom210 = &scom210; + scom211 = &scom211; + scom214 = &scom214; + scom215 = &scom215; + scom216 = &scom216; + scom217 = &scom217; + scom300 = &scom300; + scom301 = &scom301; + scom310 = &scom310; + scom311 = &scom311; + scom312 = &scom312; + scom313 = &scom313; + scom314 = &scom314; + scom315 = &scom315; + scom402 = &scom402; + scom403 = &scom403; + scom410 = &scom410; + scom411 = &scom411; + scom414 = &scom414; + scom415 = &scom415; + scom416 = &scom416; + scom417 = &scom417; + + spi10 = &cfam0_spi0; + spi11 = &cfam0_spi1; + spi12 = &cfam0_spi2; + spi13 = &cfam0_spi3; + spi20 = &cfam1_spi0; + spi21 = &cfam1_spi1; + spi22 = &cfam1_spi2; + spi23 = &cfam1_spi3; + spi30 = &cfam2_spi0; + spi31 = &cfam2_spi1; + spi32 = &cfam2_spi2; + spi33 = &cfam2_spi3; + spi40 = &cfam3_spi0; + spi41 = &cfam3_spi1; + spi42 = &cfam3_spi2; + spi43 = &cfam3_spi3; + }; +}; + +&fsim0 { + #address-cells = <2>; + #size-cells = <0>; + status = "okay"; + bus-frequency = <100000000>; + cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom@1000 { + compatible = "ibm,p9-scom"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,i2c-fsi"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam0_i2c0: i2c-bus@0 { + reg = <0>; /* OMI01 */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom100: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo100: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam0_i2c1: i2c-bus@1 { + reg = <1>; /* OMI23 */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom101: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo101: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam0_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom110: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo110: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam0_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom111: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo111: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam0_i2c12: i2c-bus@c { + reg = <12>; /* OP4A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom112: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo112: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam0_i2c13: i2c-bus@d { + reg = <13>; /* OP4B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom113: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo113: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam0_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom114: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo114: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam0_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom115: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo115: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + }; + + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam0_spi0: spi@0 { + compatible = "ibm,spi-fsi"; + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam0_spi1: spi@20 { + compatible = "ibm,spi-fsi"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam0_spi2: spi@40 { + compatible = "ibm,spi-fsi"; + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam0_spi3: spi@60 { + compatible = "ibm,spi-fsi"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + + occ { + compatible = "ibm,p10-occ"; + + hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; + }; + }; + + fsi_hub0: fsi@3400 { + compatible = "ibm,p9-fsi-controller"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + }; + }; +}; + +&fsi_hub0 { + cfam@1,0 { + reg = <1 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <1>; + + scom@1000 { + compatible = "ibm,p9-scom"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,i2c-fsi"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam1_i2c2: i2c-bus@2 { + reg = <2>; /* OMI45 */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom202: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo202: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam1_i2c3: i2c-bus@3 { + reg = <3>; /* OMI67 */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom203: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo203: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam1_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom210: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo210: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam1_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom211: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo211: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam1_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom214: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo214: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam1_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom215: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo215: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam1_i2c16: i2c-bus@10 { + reg = <16>; /* OP6A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom216: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo216: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam1_i2c17: i2c-bus@11 { + reg = <17>; /* OP6B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom217: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo217: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + }; + + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam1_spi0: spi@0 { + compatible = "ibm,spi-fsi"; + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam1_spi1: spi@20 { + compatible = "ibm,spi-fsi"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam1_spi2: spi@40 { + compatible = "ibm,spi-fsi"; + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam1_spi3: spi@60 { + compatible = "ibm,spi-fsi"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + + occ { + compatible = "ibm,p10-occ"; + + hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; + }; + }; + + fsi@3400 { + compatible = "ibm,p9-fsi-controller"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + no-scan-on-init; + }; + }; + + cfam@2,0 { + reg = <2 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <2>; + + scom@1000 { + compatible = "ibm,p9-scom"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,i2c-fsi"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam2_i2c0: i2c-bus@0 { + reg = <0>; /* OM01 */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom300: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo300: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam2_i2c1: i2c-bus@1 { + reg = <1>; /* OM23 */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom301: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo301: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam2_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom310: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo310: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam2_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom311: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo311: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam2_i2c12: i2c-bus@c { + reg = <12>; /* OP4A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom312: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo312: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam2_i2c13: i2c-bus@d { + reg = <13>; /* OP4B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom313: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo313: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam2_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom314: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo314: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam2_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom315: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo315: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + }; + + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam2_spi0: spi@0 { + compatible = "ibm,spi-fsi"; + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam2_spi1: spi@20 { + compatible = "ibm,spi-fsi"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam2_spi2: spi@40 { + compatible = "ibm,spi-fsi"; + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam2_spi3: spi@60 { + compatible = "ibm,spi-fsi"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + + occ { + compatible = "ibm,p10-occ"; + + hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; + }; + }; + + fsi@3400 { + compatible = "ibm,p9-fsi-controller"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + no-scan-on-init; + }; + }; + + cfam@3,0 { + reg = <3 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <3>; + + scom@1000 { + compatible = "ibm,p9-scom"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,i2c-fsi"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam3_i2c2: i2c-bus@2 { + reg = <2>; /* OM45 */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom402: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo402: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam3_i2c3: i2c-bus@3 { + reg = <3>; /* OM67 */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom403: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo403: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam3_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom410: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo410: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam3_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom411: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo411: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam3_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom414: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo414: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam3_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom415: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo415: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam3_i2c16: i2c-bus@10 { + reg = <16>; /* OP6A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom416: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo416: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam3_i2c17: i2c-bus@11 { + reg = <17>; /* OP6B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom417: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo417: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + }; + + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam3_spi0: spi@0 { + compatible = "ibm,spi-fsi"; + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam3_spi1: spi@20 { + compatible = "ibm,spi-fsi"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam3_spi2: spi@40 { + compatible = "ibm,spi-fsi"; + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam3_spi3: spi@60 { + compatible = "ibm,spi-fsi"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + + occ { + compatible = "ibm,p10-occ"; + + hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; + }; + }; + + fsi@3400 { + compatible = "ibm,p9-fsi-controller"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + no-scan-on-init; + }; + }; +}; diff --git a/arch/arm/boot/dts/broadcom/bcm21664-garnet.dts b/arch/arm/boot/dts/broadcom/bcm21664-garnet.dts index 8789fae178bf..4f8ddc1b3ab7 100644 --- a/arch/arm/boot/dts/broadcom/bcm21664-garnet.dts +++ b/arch/arm/boot/dts/broadcom/bcm21664-garnet.dts @@ -11,6 +11,10 @@ model = "BCM21664 Garnet board"; compatible = "brcm,bcm21664-garnet", "brcm,bcm21664"; + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ diff --git a/arch/arm/boot/dts/broadcom/bcm21664.dtsi b/arch/arm/boot/dts/broadcom/bcm21664.dtsi index fa73600e883e..f0d0300079b6 100644 --- a/arch/arm/boot/dts/broadcom/bcm21664.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm21664.dtsi @@ -1,21 +1,11 @@ // SPDX-License-Identifier: GPL-2.0-only // Copyright (C) 2014 Broadcom Corporation -#include <dt-bindings/clock/bcm21664.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/interrupt-controller/irq.h> +#include "bcm2166x-common.dtsi" / { - #address-cells = <1>; - #size-cells = <1>; - model = "BCM21664 SoC"; - compatible = "brcm,bcm21664"; interrupt-parent = <&gic>; - chosen { - bootargs = "console=ttyS0,115200n8"; - }; - cpus { #address-cells = <1>; #size-cells = <0>; @@ -34,312 +24,46 @@ reg = <1>; }; }; +}; - gic: interrupt-controller@3ff00100 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - #address-cells = <0>; - interrupt-controller; - reg = <0x3ff01000 0x1000>, - <0x3ff00100 0x100>; - }; - - smc@3404e000 { - compatible = "brcm,bcm21664-smc", "brcm,kona-smc"; - reg = <0x3404e000 0x400>; /* 1 KiB in SRAM */ - }; - - uartb: serial@3e000000 { - compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart"; - reg = <0x3e000000 0x118>; - clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>; - interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - uartb2: serial@3e001000 { - compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart"; - reg = <0x3e001000 0x118>; - clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>; - interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - uartb3: serial@3e002000 { - compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart"; - reg = <0x3e002000 0x118>; - clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>; - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - L2: cache-controller@3ff20000 { - compatible = "arm,pl310-cache"; - reg = <0x3ff20000 0x1000>; - cache-unified; - cache-level = <2>; - }; - - brcm,resetmgr@35001f00 { - compatible = "brcm,bcm21664-resetmgr"; - reg = <0x35001f00 0x24>; - }; - - timer@35006000 { - compatible = "brcm,kona-timer"; - reg = <0x35006000 0x1c>; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>; - }; - - gpio: gpio@35003000 { - compatible = "brcm,bcm21664-gpio", "brcm,kona-gpio"; - reg = <0x35003000 0x524>; - interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - #interrupt-cells = <2>; - gpio-controller; - interrupt-controller; - }; - - sdio1: mmc@3f180000 { - compatible = "brcm,kona-sdhci"; - reg = <0x3f180000 0x801c>; - interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>; - status = "disabled"; - }; - - sdio2: mmc@3f190000 { - compatible = "brcm,kona-sdhci"; - reg = <0x3f190000 0x801c>; - interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>; - status = "disabled"; - }; - - sdio3: mmc@3f1a0000 { - compatible = "brcm,kona-sdhci"; - reg = <0x3f1a0000 0x801c>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>; - status = "disabled"; - }; - - sdio4: mmc@3f1b0000 { - compatible = "brcm,kona-sdhci"; - reg = <0x3f1b0000 0x801c>; - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>; - status = "disabled"; - }; - - bsc1: i2c@3e016000 { - compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c"; - reg = <0x3e016000 0x70>; - interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>; - status = "disabled"; - }; - - bsc2: i2c@3e017000 { - compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c"; - reg = <0x3e017000 0x70>; - interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>; - status = "disabled"; - }; - - bsc3: i2c@3e018000 { - compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c"; - reg = <0x3e018000 0x70>; - interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>; - status = "disabled"; - }; - - bsc4: i2c@3e01c000 { - compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c"; - reg = <0x3e01c000 0x70>; - interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>; - status = "disabled"; - }; - - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - /* - * Fixed clocks are defined before CCUs whose - * clocks may depend on them. - */ - - ref_32k_clk: ref_32k { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; - }; - - bbl_32k_clk: bbl_32k { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; - }; - - ref_13m_clk: ref_13m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <13000000>; - }; - - var_13m_clk: var_13m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <13000000>; - }; - - dft_19_5m_clk: dft_19_5m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <19500000>; - }; - - ref_crystal_clk: ref_crystal { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <26000000>; - }; - - ref_52m_clk: ref_52m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <52000000>; - }; - - var_52m_clk: var_52m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <52000000>; - }; - - usb_otg_ahb_clk: usb_otg_ahb { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <52000000>; - }; - - ref_96m_clk: ref_96m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <96000000>; - }; - - var_96m_clk: var_96m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <96000000>; - }; - - ref_104m_clk: ref_104m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <104000000>; - }; - - var_104m_clk: var_104m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <104000000>; - }; - - ref_156m_clk: ref_156m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <156000000>; +&apps { + gic: interrupt-controller@1c01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x01c01000 0x1000>, + <0x01c00100 0x100>; }; - var_156m_clk: var_156m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <156000000>; + L2: cache-controller@1c20000 { + compatible = "arm,pl310-cache"; + reg = <0x01c20000 0x1000>; + cache-unified; + cache-level = <2>; }; +}; - root_ccu: root_ccu@35001000 { - compatible = "brcm,bcm21664-root-ccu"; - reg = <0x35001000 0x0f00>; - #clock-cells = <1>; - clock-output-names = "frac_1m"; - }; +&bsc1 { + compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c"; +}; - aon_ccu: aon_ccu@35002000 { - compatible = "brcm,bcm21664-aon-ccu"; - reg = <0x35002000 0x0f00>; - #clock-cells = <1>; - clock-output-names = "hub_timer"; - }; +&bsc2 { + compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c"; +}; - master_ccu: master_ccu@3f001000 { - compatible = "brcm,bcm21664-master-ccu"; - reg = <0x3f001000 0x0f00>; - #clock-cells = <1>; - clock-output-names = "sdio1", - "sdio2", - "sdio3", - "sdio4", - "sdio1_sleep", - "sdio2_sleep", - "sdio3_sleep", - "sdio4_sleep"; - }; +&bsc3 { + compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c"; +}; - slave_ccu: slave_ccu@3e011000 { - compatible = "brcm,bcm21664-slave-ccu"; - reg = <0x3e011000 0x0f00>; - #clock-cells = <1>; - clock-output-names = "uartb", - "uartb2", - "uartb3", - "bsc1", - "bsc2", - "bsc3", - "bsc4"; - }; - }; +&bsc4 { + compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c"; +}; - usbotg: usb@3f120000 { - compatible = "snps,dwc2"; - reg = <0x3f120000 0x10000>; - interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&usb_otg_ahb_clk>; - clock-names = "otg"; - phys = <&usbphy>; - phy-names = "usb2-phy"; - status = "disabled"; - }; +&gpio { + compatible = "brcm,bcm21664-gpio", "brcm,kona-gpio"; +}; - usbphy: usb-phy@3f130000 { - compatible = "brcm,kona-usb2-phy"; - reg = <0x3f130000 0x28>; - #phy-cells = <0>; - status = "disabled"; - }; +&smc { + compatible = "brcm,bcm21664-smc", "brcm,kona-smc"; }; diff --git a/arch/arm/boot/dts/broadcom/bcm2166x-common.dtsi b/arch/arm/boot/dts/broadcom/bcm2166x-common.dtsi new file mode 100644 index 000000000000..87180b7fd695 --- /dev/null +++ b/arch/arm/boot/dts/broadcom/bcm2166x-common.dtsi @@ -0,0 +1,334 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Common device tree for components shared between the BCM21664 and BCM23550 + * SoCs. + * + * Copyright (C) 2016 Broadcom + */ + +/dts-v1/; + +#include <dt-bindings/clock/bcm21664.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + + /* Hub bus */ + hub: hub-bus@34000000 { + compatible = "simple-bus"; + ranges = <0 0x34000000 0x102f83ac>; + #address-cells = <1>; + #size-cells = <1>; + + smc: smc@4e000 { + /* Compatible filled by SoC DTSI */ + reg = <0x0004e000 0x400>; /* 1 KiB in SRAM */ + }; + + resetmgr: reset-controller@1001f00 { + compatible = "brcm,bcm21664-resetmgr"; + reg = <0x01001f00 0x24>; + }; + + gpio: gpio@1003000 { + /* Compatible filled by SoC DTSI */ + reg = <0x01003000 0x524>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + #interrupt-cells = <2>; + gpio-controller; + interrupt-controller; + }; + + timer@1006000 { + compatible = "brcm,kona-timer"; + reg = <0x01006000 0x1c>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>; + }; + }; + + /* Slaves bus */ + slaves: slaves-bus@3e000000 { + compatible = "simple-bus"; + ranges = <0 0x3e000000 0x0001c070>; + #address-cells = <1>; + #size-cells = <1>; + + uartb: serial@0 { + compatible = "snps,dw-apb-uart"; + reg = <0x00000000 0x118>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uartb2: serial@1000 { + compatible = "snps,dw-apb-uart"; + reg = <0x00001000 0x118>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uartb3: serial@2000 { + compatible = "snps,dw-apb-uart"; + reg = <0x00002000 0x118>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + bsc1: i2c@16000 { + /* Compatible filled by SoC DTSI */ + reg = <0x00016000 0x70>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>; + status = "disabled"; + }; + + bsc2: i2c@17000 { + /* Compatible filled by SoC DTSI */ + reg = <0x00017000 0x70>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>; + status = "disabled"; + }; + + bsc3: i2c@18000 { + /* Compatible filled by SoC DTSI */ + reg = <0x00018000 0x70>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>; + status = "disabled"; + }; + + bsc4: i2c@1c000 { + /* Compatible filled by SoC DTSI */ + reg = <0x0001c000 0x70>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>; + status = "disabled"; + }; + }; + + /* Apps bus */ + apps: apps-bus@3e300000 { + compatible = "simple-bus"; + ranges = <0 0x3e300000 0x01c02000>; + #address-cells = <1>; + #size-cells = <1>; + + usbotg: usb@e20000 { + compatible = "snps,dwc2"; + reg = <0x00e20000 0x10000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usb_otg_ahb_clk>; + clock-names = "otg"; + phys = <&usbphy>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + + usbphy: usb-phy@e30000 { + compatible = "brcm,kona-usb2-phy"; + reg = <0x00e30000 0x28>; + #phy-cells = <0>; + status = "disabled"; + }; + + sdio1: mmc@e80000 { + compatible = "brcm,kona-sdhci"; + reg = <0x00e80000 0x801c>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>; + status = "disabled"; + }; + + sdio2: mmc@e90000 { + compatible = "brcm,kona-sdhci"; + reg = <0x00e90000 0x801c>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>; + status = "disabled"; + }; + + sdio3: mmc@ea0000 { + compatible = "brcm,kona-sdhci"; + reg = <0x00ea0000 0x801c>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>; + status = "disabled"; + }; + + sdio4: mmc@eb0000 { + compatible = "brcm,kona-sdhci"; + reg = <0x00eb0000 0x801c>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>; + status = "disabled"; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* + * Fixed clocks are defined before CCUs whose + * clocks may depend on them. + */ + + ref_32k_clk: ref_32k { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + bbl_32k_clk: bbl_32k { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + ref_13m_clk: ref_13m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <13000000>; + }; + + var_13m_clk: var_13m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <13000000>; + }; + + dft_19_5m_clk: dft_19_5m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <19500000>; + }; + + ref_crystal_clk: ref_crystal { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <26000000>; + }; + + ref_52m_clk: ref_52m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <52000000>; + }; + + var_52m_clk: var_52m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <52000000>; + }; + + usb_otg_ahb_clk: usb_otg_ahb { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <52000000>; + }; + + ref_96m_clk: ref_96m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <96000000>; + }; + + var_96m_clk: var_96m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <96000000>; + }; + + ref_104m_clk: ref_104m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <104000000>; + }; + + var_104m_clk: var_104m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <104000000>; + }; + + ref_156m_clk: ref_156m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <156000000>; + }; + + var_156m_clk: var_156m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <156000000>; + }; + + root_ccu: root_ccu@35001000 { + compatible = "brcm,bcm21664-root-ccu"; + reg = <0x35001000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "frac_1m"; + }; + + aon_ccu: aon_ccu@35002000 { + compatible = "brcm,bcm21664-aon-ccu"; + reg = <0x35002000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "hub_timer"; + }; + + slave_ccu: slave_ccu@3e011000 { + compatible = "brcm,bcm21664-slave-ccu"; + reg = <0x3e011000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "uartb", + "uartb2", + "uartb3", + "bsc1", + "bsc2", + "bsc3", + "bsc4"; + }; + + master_ccu: master_ccu@3f001000 { + compatible = "brcm,bcm21664-master-ccu"; + reg = <0x3f001000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "sdio1", + "sdio2", + "sdio3", + "sdio4", + "sdio1_sleep", + "sdio2_sleep", + "sdio3_sleep", + "sdio4_sleep"; + }; + }; +}; diff --git a/arch/arm/boot/dts/broadcom/bcm23550.dtsi b/arch/arm/boot/dts/broadcom/bcm23550.dtsi index 50ebe93d6bd0..c1c69381286b 100644 --- a/arch/arm/boot/dts/broadcom/bcm23550.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm23550.dtsi @@ -1,45 +1,13 @@ +// SPDX-License-Identifier: BSD-3-Clause /* - * BSD LICENSE + * Device tree for the BCM23550 SoC. * - * Copyright(c) 2016 Broadcom. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Broadcom Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * Copyright (C) 2016 Broadcom */ -/* BCM23550 and BCM21664 have almost identical clocks */ -#include <dt-bindings/clock/bcm21664.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/interrupt-controller/irq.h> +#include "bcm2166x-common.dtsi" / { - #address-cells = <1>; - #size-cells = <1>; - model = "BCM23550 SoC"; - compatible = "brcm,bcm23550"; interrupt-parent = <&gic>; cpus { @@ -80,180 +48,9 @@ clock-frequency = <1000000000>; }; }; +}; - /* Hub bus */ - hub@34000000 { - compatible = "simple-bus"; - ranges = <0 0x34000000 0x102f83ac>; - #address-cells = <1>; - #size-cells = <1>; - - smc@4e000 { - compatible = "brcm,bcm23550-smc", "brcm,kona-smc"; - reg = <0x0004e000 0x400>; /* 1 KiB in SRAM */ - }; - - resetmgr: reset-controller@1001f00 { - compatible = "brcm,bcm21664-resetmgr"; - reg = <0x01001f00 0x24>; - }; - - gpio: gpio@1003000 { - compatible = "brcm,bcm23550-gpio", "brcm,kona-gpio"; - reg = <0x01003000 0x524>; - interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - #interrupt-cells = <2>; - gpio-controller; - interrupt-controller; - }; - - timer@1006000 { - compatible = "brcm,kona-timer"; - reg = <0x01006000 0x1c>; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>; - }; - }; - - /* Slaves bus */ - slaves@3e000000 { - compatible = "simple-bus"; - ranges = <0 0x3e000000 0x0001c070>; - #address-cells = <1>; - #size-cells = <1>; - - uartb: serial@0 { - compatible = "snps,dw-apb-uart"; - reg = <0x00000000 0x118>; - clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>; - interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - uartb2: serial@1000 { - compatible = "snps,dw-apb-uart"; - reg = <0x00001000 0x118>; - clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>; - interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - uartb3: serial@2000 { - compatible = "snps,dw-apb-uart"; - reg = <0x00002000 0x118>; - clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>; - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - bsc1: i2c@16000 { - compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c"; - reg = <0x00016000 0x70>; - interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>; - status = "disabled"; - }; - - bsc2: i2c@17000 { - compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c"; - reg = <0x00017000 0x70>; - interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>; - status = "disabled"; - }; - - bsc3: i2c@18000 { - compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c"; - reg = <0x00018000 0x70>; - interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>; - status = "disabled"; - }; - - bsc4: i2c@1c000 { - compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c"; - reg = <0x0001c000 0x70>; - interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>; - status = "disabled"; - }; - }; - - /* Apps bus */ - apps@3e300000 { - compatible = "simple-bus"; - ranges = <0 0x3e300000 0x01b77000>; - #address-cells = <1>; - #size-cells = <1>; - - usbotg: usb@e20000 { - compatible = "snps,dwc2"; - reg = <0x00e20000 0x10000>; - interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&usb_otg_ahb_clk>; - clock-names = "otg"; - phys = <&usbphy>; - phy-names = "usb2-phy"; - status = "disabled"; - }; - - usbphy: usb-phy@e30000 { - compatible = "brcm,kona-usb2-phy"; - reg = <0x00e30000 0x28>; - #phy-cells = <0>; - status = "disabled"; - }; - - sdio1: mmc@e80000 { - compatible = "brcm,kona-sdhci"; - reg = <0x00e80000 0x801c>; - interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>; - status = "disabled"; - }; - - sdio2: mmc@e90000 { - compatible = "brcm,kona-sdhci"; - reg = <0x00e90000 0x801c>; - interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>; - status = "disabled"; - }; - - sdio3: mmc@ea0000 { - compatible = "brcm,kona-sdhci"; - reg = <0x00ea0000 0x801c>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>; - status = "disabled"; - }; - - sdio4: mmc@eb0000 { - compatible = "brcm,kona-sdhci"; - reg = <0x00eb0000 0x801c>; - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>; - status = "disabled"; - }; - +&apps { cdc: cdc@1b0e000 { compatible = "brcm,bcm23550-cdc"; reg = <0x01b0e000 0x78>; @@ -267,147 +64,28 @@ reg = <0x01b21000 0x1000>, <0x01b22000 0x1000>; }; - }; - - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - /* - * Fixed clocks are defined before CCUs whose - * clocks may depend on them. - */ - - ref_32k_clk: ref_32k { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; - }; - - bbl_32k_clk: bbl_32k { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; - }; - - ref_13m_clk: ref_13m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <13000000>; - }; - - var_13m_clk: var_13m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <13000000>; - }; - - dft_19_5m_clk: dft_19_5m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <19500000>; - }; - - ref_crystal_clk: ref_crystal { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <26000000>; - }; - - ref_52m_clk: ref_52m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <52000000>; - }; - - var_52m_clk: var_52m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <52000000>; - }; - - usb_otg_ahb_clk: usb_otg_ahb { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <52000000>; - }; - - ref_96m_clk: ref_96m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <96000000>; - }; - - var_96m_clk: var_96m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <96000000>; - }; - - ref_104m_clk: ref_104m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <104000000>; - }; - - var_104m_clk: var_104m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <104000000>; - }; +}; - ref_156m_clk: ref_156m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <156000000>; - }; +&bsc1 { + compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c"; +}; - var_156m_clk: var_156m { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <156000000>; - }; +&bsc2 { + compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c"; +}; - root_ccu: root_ccu@35001000 { - compatible = "brcm,bcm21664-root-ccu"; - reg = <0x35001000 0x0f00>; - #clock-cells = <1>; - clock-output-names = "frac_1m"; - }; +&bsc3 { + compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c"; +}; - aon_ccu: aon_ccu@35002000 { - compatible = "brcm,bcm21664-aon-ccu"; - reg = <0x35002000 0x0f00>; - #clock-cells = <1>; - clock-output-names = "hub_timer"; - }; +&bsc4 { + compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c"; +}; - slave_ccu: slave_ccu@3e011000 { - compatible = "brcm,bcm21664-slave-ccu"; - reg = <0x3e011000 0x0f00>; - #clock-cells = <1>; - clock-output-names = "uartb", - "uartb2", - "uartb3", - "bsc1", - "bsc2", - "bsc3", - "bsc4"; - }; +&gpio { + compatible = "brcm,bcm23550-gpio", "brcm,kona-gpio"; +}; - master_ccu: master_ccu@3f001000 { - compatible = "brcm,bcm21664-master-ccu"; - reg = <0x3f001000 0x0f00>; - #clock-cells = <1>; - clock-output-names = "sdio1", - "sdio2", - "sdio3", - "sdio4", - "sdio1_sleep", - "sdio2_sleep", - "sdio3_sleep", - "sdio4_sleep"; - }; - }; +&smc { + compatible = "brcm,bcm23550-smc", "brcm,kona-smc"; }; diff --git a/arch/arm/boot/dts/broadcom/bcm2837.dtsi b/arch/arm/boot/dts/broadcom/bcm2837.dtsi index 84c08b46519d..c281697142b1 100644 --- a/arch/arm/boot/dts/broadcom/bcm2837.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm2837.dtsi @@ -9,7 +9,7 @@ <0x40000000 0x40000000 0x00001000>; dma-ranges = <0xc0000000 0x00000000 0x3f000000>; - local_intc: local_intc@40000000 { + local_intc: interrupt-controller@40000000 { compatible = "brcm,bcm2836-l1-intc"; reg = <0x40000000 0x100>; interrupt-controller; diff --git a/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts b/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts index 25eeacf6a248..45bd27906f29 100644 --- a/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts +++ b/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts @@ -215,11 +215,15 @@ reg = <0x50>; pagesize = <32>; read-only; - #address-cells = <1>; - #size-cells = <1>; - mac_address: mac-address@66 { - reg = <0x66 0x6>; + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + mac_address: mac-address@66 { + reg = <0x66 0x6>; + }; }; }; }; diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi index b0854d881ac6..71a8b77b46f4 100644 --- a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi @@ -55,11 +55,15 @@ reg = <0x50>; pagesize = <32>; read-only; - #address-cells = <1>; - #size-cells = <1>; - mac_address: mac-address@66 { - reg = <0x66 0x6>; + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + mac_address: mac-address@66 { + reg = <0x66 0x6>; + }; }; }; }; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts index 65f390bf8975..84f39dec3c42 100644 --- a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts @@ -130,8 +130,8 @@ #gpio-cells = <2>; }; - temp: lm75@48 { - compatible = "lm75"; + temp: temperature-sensor@48 { + compatible = "national,lm75"; reg = <0x48>; }; diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi index f3a3cb6ac311..8208c6a9627a 100644 --- a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi +++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi @@ -423,14 +423,14 @@ status = "okay"; /* U26 temperature sensor placed near SoC */ - temp1: nct75@4c { - compatible = "lm75"; + temp1: temperature-sensor@4c { + compatible = "ti,tmp75c"; reg = <0x4c>; }; /* U27 temperature sensor placed near RTC battery */ - temp2: nct75@4d { - compatible = "lm75"; + temp2: temperature-sensor@4d { + compatible = "ti,tmp75c"; reg = <0x4d>; }; diff --git a/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts index c6fbdd29019f..b9ffd9e5faac 100644 --- a/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts +++ b/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts @@ -198,8 +198,6 @@ dmas = <0>, <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx0_default>; - #address-cells = <1>; - #size-cells = <0>; i2c-analog-filter; i2c-digital-filter; i2c-digital-filter-width-ns = <35>; diff --git a/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts index f3cbb675cea4..3b38707d736e 100644 --- a/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts +++ b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts @@ -207,8 +207,6 @@ status = "okay"; i2c0: i2c@600 { - #address-cells = <1>; - #size-cells = <0>; dmas = <0>, <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx0_default>; @@ -254,8 +252,6 @@ status = "okay"; i2c6: i2c@600 { - #address-cells = <1>; - #size-cells = <0>; dmas = <0>, <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx6_default>; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi index 4617805c7748..c173f49cb910 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi +++ b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi @@ -31,6 +31,14 @@ }; }; + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "VDD_MAIN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-wilc1000"; reset-gpios = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>; @@ -70,6 +78,11 @@ mcp16502@5b { compatible = "microchip,mcp16502"; reg = <0x5b>; + lvin-supply = <®_5v>; + pvin1-supply = <®_5v>; + pvin2-supply = <®_5v>; + pvin3-supply = <®_5v>; + pvin4-supply = <®_5v>; status = "okay"; lpm-gpios = <&pioBU 0 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts index 6b02b7bcfd49..951a0c97d3c6 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts @@ -84,6 +84,14 @@ device_type = "memory"; reg = <0x20000000 0x20000000>; }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "5V_MAIN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; }; &adc { @@ -144,6 +152,11 @@ mcp16502@5b { compatible = "microchip,mcp16502"; reg = <0x5b>; + lvin-supply = <®_5v>; + pvin1-supply = <®_5v>; + pvin2-supply = <®_5v>; + pvin3-supply = <®_5v>; + pvin4-supply = <®_5v>; status = "okay"; lpm-gpios = <&pioBU 0 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts index 999adeca6f33..5e2bb517a480 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts @@ -78,6 +78,14 @@ linux,default-trigger = "heartbeat"; }; }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "VDD_MAIN_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; }; &adc { @@ -190,6 +198,11 @@ mcp16502@5b { compatible = "microchip,mcp16502"; reg = <0x5b>; + lvin-supply = <®_5v>; + pvin1-supply = <®_5v>; + pvin2-supply = <®_5v>; + pvin3-supply = <®_5v>; + pvin4-supply = <®_5v>; status = "okay"; lpm-gpios = <&pioBU 7 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts index 009d2c832421..645e49fdb7fe 100644 --- a/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts +++ b/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts @@ -72,6 +72,14 @@ device_type = "memory"; reg = <0x60000000 0x10000000>; /* 256 MiB DDR3L-1066 16-bit */ }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "5V_MAIN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; }; &adc { @@ -189,6 +197,11 @@ pmic@5b { compatible = "microchip,mcp16502"; reg = <0x5b>; + lvin-supply = <®_5v>; + pvin1-supply = <®_5v>; + pvin2-supply = <®_5v>; + pvin3-supply = <®_5v>; + pvin4-supply = <®_5v>; regulators { vdd_3v3: VDD_IO { diff --git a/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts b/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts index 20b2497657ae..ed75d491a246 100644 --- a/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts +++ b/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts @@ -88,6 +88,14 @@ reg = <0x60000000 0x20000000>; }; + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "5V_MAIN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + sound: sound { compatible = "simple-audio-card"; simple-audio-card,name = "sama7g5ek audio"; @@ -239,6 +247,11 @@ mcp16502@5b { compatible = "microchip,mcp16502"; reg = <0x5b>; + lvin-supply = <®_5v>; + pvin1-supply = <®_5v>; + pvin2-supply = <®_5v>; + pvin3-supply = <®_5v>; + pvin4-supply = <®_5v>; status = "okay"; regulators { @@ -403,6 +416,42 @@ i2c-digital-filter; i2c-digital-filter-width-ns = <35>; status = "okay"; + + eeprom0: eeprom@52 { + compatible = "microchip,24aa025e48"; + reg = <0x52>; + size = <256>; + pagesize = <16>; + vcc-supply = <&vdd_3v3>; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom0_eui48: eui48@fa { + reg = <0xfa 0x6>; + }; + }; + }; + + eeprom1: eeprom@53 { + compatible = "microchip,24aa025e48"; + reg = <0x53>; + size = <256>; + pagesize = <16>; + vcc-supply = <&vdd_3v3>; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom1_eui48: eui48@fa { + reg = <0xfa 0x6>; + }; + }; + }; }; }; @@ -440,6 +489,8 @@ &pinctrl_gmac0_txck_default &pinctrl_gmac0_phy_irq>; phy-mode = "rgmii-id"; + nvmem-cells = <&eeprom0_eui48>; + nvmem-cell-names = "mac-address"; status = "okay"; ethernet-phy@7 { @@ -457,6 +508,8 @@ &pinctrl_gmac1_mdio_default &pinctrl_gmac1_phy_irq>; phy-mode = "rmii"; + nvmem-cells = <&eeprom1_eui48>; + nvmem-cell-names = "mac-address"; status = "okay"; /* Conflict with pdmc0. */ ethernet-phy@0 { diff --git a/arch/arm/boot/dts/microchip/at91rm9200.dtsi b/arch/arm/boot/dts/microchip/at91rm9200.dtsi index 16c675e3a890..02a838541dc3 100644 --- a/arch/arm/boot/dts/microchip/at91rm9200.dtsi +++ b/arch/arm/boot/dts/microchip/at91rm9200.dtsi @@ -225,7 +225,7 @@ pinctrl@fffff400 { #address-cells = <1>; #size-cells = <1>; - compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + compatible = "atmel,at91rm9200-pinctrl", "simple-mfd"; ranges = <0xfffff400 0xfffff400 0x800>; atmel,mux-mask = < diff --git a/arch/arm/boot/dts/microchip/at91sam9260.dtsi b/arch/arm/boot/dts/microchip/at91sam9260.dtsi index e56d5546554c..0038183e9a53 100644 --- a/arch/arm/boot/dts/microchip/at91sam9260.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9260.dtsi @@ -170,7 +170,7 @@ pinctrl: pinctrl@fffff400 { #address-cells = <1>; #size-cells = <1>; - compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + compatible = "atmel,at91rm9200-pinctrl", "simple-mfd"; ranges = <0xfffff400 0xfffff400 0x600>; atmel,mux-mask = < diff --git a/arch/arm/boot/dts/microchip/at91sam9261.dtsi b/arch/arm/boot/dts/microchip/at91sam9261.dtsi index 307b60658014..b57a7fd67197 100644 --- a/arch/arm/boot/dts/microchip/at91sam9261.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9261.dtsi @@ -317,7 +317,7 @@ pinctrl@fffff400 { #address-cells = <1>; #size-cells = <1>; - compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + compatible = "atmel,at91rm9200-pinctrl", "simple-mfd"; ranges = <0xfffff400 0xfffff400 0x600>; atmel,mux-mask = diff --git a/arch/arm/boot/dts/microchip/at91sam9263.dtsi b/arch/arm/boot/dts/microchip/at91sam9263.dtsi index 75d8ff2d12c8..b95d4016ae9f 100644 --- a/arch/arm/boot/dts/microchip/at91sam9263.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9263.dtsi @@ -167,7 +167,7 @@ pinctrl@fffff200 { #address-cells = <1>; #size-cells = <1>; - compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + compatible = "atmel,at91rm9200-pinctrl", "simple-mfd"; ranges = <0xfffff200 0xfffff200 0xa00>; atmel,mux-mask = < diff --git a/arch/arm/boot/dts/microchip/at91sam9g20ek_2mmc.dts b/arch/arm/boot/dts/microchip/at91sam9g20ek_2mmc.dts index 172af6ff4b18..3e5eab57d1a5 100644 --- a/arch/arm/boot/dts/microchip/at91sam9g20ek_2mmc.dts +++ b/arch/arm/boot/dts/microchip/at91sam9g20ek_2mmc.dts @@ -40,13 +40,13 @@ leds { compatible = "gpio-leds"; - ds1 { + led-ds1 { label = "ds1"; gpios = <&pioB 9 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; - ds5 { + led-ds5 { label = "ds5"; gpios = <&pioB 8 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts b/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts index af70eb8a3a02..e0c1e8df81b1 100644 --- a/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts +++ b/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts @@ -37,71 +37,71 @@ leds { compatible = "gpio-leds"; - power_blue { + led-power-blue { label = "smartgw:power:blue"; gpios = <&pioC 21 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - power_green { + led-power-green { label = "smartgw:power:green"; gpios = <&pioC 20 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - power_red { + led-power-red { label = "smartgw:power:red"; gpios = <&pioC 19 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - radio_blue { + led-radio-blue { label = "smartgw:radio:blue"; gpios = <&pioC 18 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - radio_green { + led-radio-green { label = "smartgw:radio:green"; gpios = <&pioC 17 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - radio_red { + led-radio-red { label = "smartgw:radio:red"; gpios = <&pioC 16 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - internet_blue { + led-internet-blue { label = "smartgw:internet:blue"; gpios = <&pioC 15 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - internet_green { + led-internet-green { label = "smartgw:internet:green"; gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - internet_red { + led-internet-red { label = "smartgw:internet:red"; gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - heartbeat { + led-heartbeat { label = "smartgw:heartbeat"; gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; - pb18 { + led-pb18 { status = "disabled"; }; - pd21 { + led-pd21 { status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/microchip/at91sam9g45.dtsi b/arch/arm/boot/dts/microchip/at91sam9g45.dtsi index 325c63a53118..c54eb21d5cba 100644 --- a/arch/arm/boot/dts/microchip/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9g45.dtsi @@ -190,7 +190,7 @@ pinctrl@fffff200 { #address-cells = <1>; #size-cells = <1>; - compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + compatible = "atmel,at91rm9200-pinctrl", "simple-mfd"; ranges = <0xfffff200 0xfffff200 0xa00>; atmel,mux-mask = < diff --git a/arch/arm/boot/dts/microchip/at91sam9n12.dtsi b/arch/arm/boot/dts/microchip/at91sam9n12.dtsi index 8dc04e9031a6..844bd50943fc 100644 --- a/arch/arm/boot/dts/microchip/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9n12.dtsi @@ -226,7 +226,7 @@ pinctrl@fffff400 { #address-cells = <1>; #size-cells = <1>; - compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; + compatible = "atmel,at91sam9x5-pinctrl", "simple-mfd"; ranges = <0xfffff400 0xfffff400 0x800>; atmel,mux-mask = < diff --git a/arch/arm/boot/dts/microchip/at91sam9n12ek.dts b/arch/arm/boot/dts/microchip/at91sam9n12ek.dts index 4c644d4c6be7..643c3b2ab97e 100644 --- a/arch/arm/boot/dts/microchip/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/microchip/at91sam9n12ek.dts @@ -207,19 +207,19 @@ leds { compatible = "gpio-leds"; - d8 { + led-d8 { label = "d8"; gpios = <&pioB 4 GPIO_ACTIVE_LOW>; linux,default-trigger = "mmc0"; }; - d9 { + led-d9 { label = "d9"; gpios = <&pioB 5 GPIO_ACTIVE_LOW>; linux,default-trigger = "nand-disk"; }; - d10 { + led-d10 { label = "d10"; gpios = <&pioB 6 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/microchip/at91sam9rl.dtsi b/arch/arm/boot/dts/microchip/at91sam9rl.dtsi index 7436b5c862b1..1fec9fcc7cd1 100644 --- a/arch/arm/boot/dts/microchip/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9rl.dtsi @@ -339,7 +339,7 @@ pinctrl@fffff400 { #address-cells = <1>; #size-cells = <1>; - compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + compatible = "atmel,at91rm9200-pinctrl", "simple-mfd"; ranges = <0xfffff400 0xfffff400 0x800>; atmel,mux-mask = diff --git a/arch/arm/boot/dts/microchip/at91sam9x5.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5.dtsi index a7456c2191fa..27c1f2861cc3 100644 --- a/arch/arm/boot/dts/microchip/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9x5.dtsi @@ -202,7 +202,7 @@ pinctrl: pinctrl@fffff400 { #address-cells = <1>; #size-cells = <1>; - compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; + compatible = "atmel,at91sam9x5-pinctrl", "simple-mfd"; ranges = <0xfffff400 0xfffff400 0x800>; /* shared pinctrl settings */ diff --git a/arch/arm/boot/dts/microchip/at91sam9x5cm.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5cm.dtsi index cdd37f67280b..fb3c19bdfcb6 100644 --- a/arch/arm/boot/dts/microchip/at91sam9x5cm.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9x5cm.dtsi @@ -120,13 +120,13 @@ leds { compatible = "gpio-leds"; - pb18 { + led-pb18 { label = "pb18"; gpios = <&pioB 18 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; - pd21 { + led-pd21 { label = "pd21"; gpios = <&pioD 21 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/microchip/sam9x60.dtsi b/arch/arm/boot/dts/microchip/sam9x60.dtsi index 291540e5d81e..04a6d716ecaf 100644 --- a/arch/arm/boot/dts/microchip/sam9x60.dtsi +++ b/arch/arm/boot/dts/microchip/sam9x60.dtsi @@ -215,6 +215,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -284,6 +286,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -394,6 +398,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -443,6 +449,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -600,6 +608,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -649,6 +659,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -698,6 +710,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -766,6 +780,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -834,6 +850,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -902,6 +920,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -970,6 +990,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -1074,6 +1096,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -1123,6 +1147,8 @@ compatible = "microchip,sam9x60-i2c"; reg = <0x600 0x200>; interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | @@ -1223,7 +1249,7 @@ pinctrl: pinctrl@fffff400 { #address-cells = <1>; #size-cells = <1>; - compatible = "microchip,sam9x60-pinctrl", "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; + compatible = "microchip,sam9x60-pinctrl", "simple-mfd"; ranges = <0xfffff400 0xfffff400 0x800>; /* mux-mask corresponding to sam9x60 SoC in TFBGA228L package */ @@ -1236,7 +1262,7 @@ >; pioA: gpio@fffff400 { - compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; @@ -1247,7 +1273,7 @@ }; pioB: gpio@fffff600 { - compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x200>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; @@ -1259,7 +1285,7 @@ }; pioC: gpio@fffff800 { - compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x200>; interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; @@ -1270,7 +1296,7 @@ }; pioD: gpio@fffffa00 { - compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x200>; interrupts = <44 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; @@ -1312,7 +1338,7 @@ compatible = "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt"; reg = <0xfffffe20 0x20>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&clk32k 0>; + clocks = <&clk32k 1>; }; pit: timer@fffffe40 { @@ -1338,7 +1364,7 @@ compatible = "microchip,sam9x60-rtc", "atmel,at91sam9x5-rtc"; reg = <0xfffffea8 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&clk32k 0>; + clocks = <&clk32k 1>; }; watchdog: watchdog@ffffff80 { diff --git a/arch/arm/boot/dts/microchip/sama5d3.dtsi b/arch/arm/boot/dts/microchip/sama5d3.dtsi index d4fc0c1dfc10..39865133aa56 100644 --- a/arch/arm/boot/dts/microchip/sama5d3.dtsi +++ b/arch/arm/boot/dts/microchip/sama5d3.dtsi @@ -493,7 +493,7 @@ pinctrl: pinctrl@fffff200 { #address-cells = <1>; #size-cells = <1>; - compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus"; + compatible = "atmel,sama5d3-pinctrl", "simple-mfd"; ranges = <0xfffff200 0xfffff200 0xa00>; atmel,mux-mask = < /* A B C */ diff --git a/arch/arm/boot/dts/microchip/sama5d4.dtsi b/arch/arm/boot/dts/microchip/sama5d4.dtsi index 58ceed997889..b253ba33fc38 100644 --- a/arch/arm/boot/dts/microchip/sama5d4.dtsi +++ b/arch/arm/boot/dts/microchip/sama5d4.dtsi @@ -791,7 +791,7 @@ pinctrl: pinctrl@fc06a000 { #address-cells = <1>; #size-cells = <1>; - compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus"; + compatible = "atmel,sama5d3-pinctrl", "simple-mfd"; ranges = <0xfc068000 0xfc068000 0x100 0xfc06a000 0xfc06a000 0x4000>; /* WARNING: revisit as pin spec has changed */ diff --git a/arch/arm/boot/dts/microchip/sama7g5.dtsi b/arch/arm/boot/dts/microchip/sama7g5.dtsi index 75778be126a3..17bcdcf0cf4a 100644 --- a/arch/arm/boot/dts/microchip/sama7g5.dtsi +++ b/arch/arm/boot/dts/microchip/sama7g5.dtsi @@ -272,7 +272,7 @@ compatible = "microchip,sama7g5-rtt", "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt"; reg = <0xe001d020 0x30>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk32k 0>; + clocks = <&clk32k 1>; }; clk32k: clock-controller@e001d050 { diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts index 1f07ba382910..886a87dfcd0d 100644 --- a/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts +++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts @@ -531,8 +531,8 @@ reg = <4>; // INLET1_T - lm75@5c { - compatible = "ti,lm75"; + temperature-sensor@5c { + compatible = "national,lm75"; reg = <0x5c>; }; }; @@ -543,8 +543,8 @@ reg = <5>; // OUTLET1_T - lm75@5c { - compatible = "ti,lm75"; + temperature-sensor@5c { + compatible = "national,lm75"; reg = <0x5c>; }; }; @@ -555,8 +555,8 @@ reg = <6>; // OUTLET2_T - lm75@5c { - compatible = "ti,lm75"; + temperature-sensor@5c { + compatible = "national,lm75"; reg = <0x5c>; }; }; @@ -567,8 +567,8 @@ reg = <7>; // OUTLET3_T - lm75@5c { - compatible = "ti,lm75"; + temperature-sensor@5c { + compatible = "national,lm75"; reg = <0x5c>; }; }; @@ -697,8 +697,8 @@ reg = <3>; // M2_ZONE_T - lm75@28 { - compatible = "ti,lm75"; + temperature-sensor@28 { + compatible = "national,lm75"; reg = <0x28>; }; }; @@ -709,8 +709,8 @@ reg = <4>; // BATT_ZONE_T - lm75@29 { - compatible = "ti,lm75"; + temperature-sensor@29 { + compatible = "national,lm75"; reg = <0x29>; }; }; @@ -721,8 +721,8 @@ reg = <5>; // NBM1_ZONE_T - lm75@28 { - compatible = "ti,lm75"; + temperature-sensor@28 { + compatible = "national,lm75"; reg = <0x28>; }; }; @@ -732,8 +732,8 @@ reg = <6>; // NBM2_ZONE_T - lm75@29 { - compatible = "ti,lm75"; + temperature-sensor@29 { + compatible = "national,lm75"; reg = <0x29>; }; }; diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-evb.dts index f53d45fa1de8..bcdcb30c7bf6 100644 --- a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-evb.dts +++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-evb.dts @@ -198,7 +198,7 @@ clock-frequency = <100000>; status = "okay"; lm75@48 { - compatible = "lm75"; + compatible = "national,lm75"; reg = <0x48>; status = "okay"; }; @@ -208,8 +208,8 @@ &i2c1 { clock-frequency = <100000>; status = "okay"; - lm75@48 { - compatible = "lm75"; + temperature-sensor@48 { + compatible = "national,lm75"; reg = <0x48>; status = "okay"; }; diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts index b78c116cbc18..edb907f740bf 100644 --- a/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts +++ b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts @@ -34,7 +34,7 @@ pinctrl-names = "default"; pinctrl-0 = <&key_pins>; - uid { + button-uid { label = "UID button"; linux,code = <KEY_HOME>; gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; @@ -46,12 +46,12 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins>; - uid { + led-uid { label = "UID"; gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; }; - heartbeat { + led-heartbeat { label = "heartbeat"; gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/nvidia/tegra114-asus-tf701t.dts b/arch/arm/boot/dts/nvidia/tegra114-asus-tf701t.dts index 763ab812eb87..f02e2cf65fe8 100644 --- a/arch/arm/boot/dts/nvidia/tegra114-asus-tf701t.dts +++ b/arch/arm/boot/dts/nvidia/tegra114-asus-tf701t.dts @@ -57,10 +57,24 @@ }; host1x@50000000 { + hdmi@54280000 { + status = "okay"; + + hdmi-supply = <&hdmi_5v0_sys>; + pll-supply = <&avdd_hdmi_pll>; + vdd-supply = <&avdd_hdmi>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&connector_in>; + }; + }; + }; + dsi@54300000 { status = "okay"; - avdd-dsi-csi-supply = <&tps65913_ldo2>; + avdd-dsi-csi-supply = <&avdd_dsi_csi>; nvidia,ganged-mode = <&dsib>; @@ -70,7 +84,7 @@ link2 = <&panel_secondary>; - power-supply = <&vdd_lcd>; + power-supply = <&dvdd_1v8_lcd>; backlight = <&backlight>; }; }; @@ -78,7 +92,7 @@ dsi@54400000 { status = "okay"; - avdd-dsi-csi-supply = <&tps65913_ldo2>; + avdd-dsi-csi-supply = <&avdd_dsi_csi>; panel_secondary: panel@0 { compatible = "sharp,lq101r1sx01"; @@ -87,66 +101,377 @@ }; }; + vde@6001a000 { + assigned-clocks = <&tegra_car TEGRA114_CLK_VDE>; + assigned-clock-parents = <&tegra_car TEGRA114_CLK_PLL_P>; + assigned-clock-rates = <408000000>; + }; + pinmux@70000868 { - asus_pad_ec_default: pinmux-asus-pad-ec-default { - ec-interrupt { - nvidia,pins = "kb_col5_pq5"; - nvidia,function = "kbc"; + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + /* WLAN SDIO pinmux */ + sdmmc1-clk { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + sdmmc1-cmd { + nvidia,pins = "sdmmc1_cmd_pz1", + "sdmmc1_dat0_py7", + "sdmmc1_dat1_py6", + "sdmmc1_dat2_py5", + "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - ec-request { - nvidia,pins = "kb_col2_pq2"; - nvidia,function = "kbc"; + wlan-power { + nvidia,pins = "clk2_req_pcc5"; + nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - }; - backlight_default: pinmux-backlight-default { - backlight-enable { - nvidia,pins = "gmi_ad10_ph2"; + wlan-reset { + nvidia,pins = "gpio_x7_aud_px7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + wlan-host-wake { + nvidia,pins = "pu5"; + nvidia,function = "pwm2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + wlan-3v3-com { + nvidia,pins = "pu1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* UART-A pinmux */ + uarta-cts { + nvidia,pins = "kb_row10_ps2"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + uarta-rts { + nvidia,pins = "kb_row9_ps1"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* GNSS UART-B pinmux */ + uartb-cts { + nvidia,pins = "uart2_cts_n_pj5"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + uartb-rts { + nvidia,pins = "uart2_rts_n_pj6"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + uartb-rxd { + nvidia,pins = "uart2_rxd_pc3"; + nvidia,function = "irda"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + uartb-txd { + nvidia,pins = "uart2_txd_pc2"; + nvidia,function = "irda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Bluetooth UART-C pinmux */ + uartc-cts-rxd { + nvidia,pins = "uart3_cts_n_pa1", + "uart3_rxd_pw7"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + uartc-rts-txd { + nvidia,pins = "uart3_rts_n_pc0", + "uart3_txd_pw6"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + bt-shutdown { + nvidia,pins = "kb_col6_pq6", + "kb_col7_pq7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + bt-dev-wake { + nvidia,pins = "clk3_req_pee1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + bt-host-wake { + nvidia,pins = "pu6"; + nvidia,function = "pwm3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + bt-pcm-dap4-out { + nvidia,pins = "dap4_fs_pp4", + "dap4_dout_pp6", + "dap4_sclk_pp7"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + bt-pcm-dap4-in { + nvidia,pins = "dap4_din_pp5"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* UART-D pinmux */ + uartd-cts { + nvidia,pins = "gmi_a17_pb0"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + uartd-rts { + nvidia,pins = "gmi_a16_pj7", + "gmi_a19_pk7"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* MicroSD pinmux */ + sdmmc3-clk { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + sdmmc3-data { + nvidia,pins = "sdmmc3_cmd_pa7", + "sdmmc3_dat0_pb7", + "sdmmc3_dat1_pb6", + "sdmmc3_dat2_pb5", + "sdmmc3_dat3_pb4", + "kb_col4_pq4", + "sdmmc3_cd_n_pv2", + "sdmmc3_clk_lb_out_pee4", + "sdmmc3_clk_lb_in_pee5"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + microsd-pwr { + nvidia,pins = "gmi_clk_pk1"; nvidia,function = "gmi"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - }; - codec_default: pinmux-codec-default { - interrupt { - nvidia,pins = "gpio_w2_aud_pw2", - "gpio_w3_aud_pw3"; - nvidia,function = "spi6"; + /* EMMC pinmux */ + sdmmc4-clk-cmd { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + sdmmc4-data { + nvidia,pins = "sdmmc4_cmd_pt7", + "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - ldo1-en { - nvidia,pins = "sdmmc1_wp_n_pv3"; - nvidia,function = "sdmmc1"; + /* I2C pinmux */ + gen1-i2c { + nvidia,pins = "gen1_i2c_scl_pc4", + "gen1_i2c_sda_pc5"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + }; + + gen2-i2c { + nvidia,pins = "gen2_i2c_scl_pt5", + "gen2_i2c_sda_pt6"; + nvidia,function = "i2c2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + }; + + cam-i2c { + nvidia,pins = "cam_i2c_scl_pbb1", + "cam_i2c_sda_pbb2"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + }; + + ddc-i2c { + nvidia,pins = "ddc_scl_pv4", + "ddc_sda_pv5"; + nvidia,function = "i2c4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + }; + + pwr-i2c { + nvidia,pins = "pwr_i2c_scl_pz6", + "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + }; + + /* SPI pinmux */ + spi1-out { + nvidia,pins = "ulpi_clk_py0", + "ulpi_nxt_py2", + "ulpi_stp_py3"; + nvidia,function = "spi1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - }; - gpio_hall_sensor_default: pinmux-gpio-hall-sensor-default { - ulpi_data4_po5 { + spi1-in { + nvidia,pins = "ulpi_dir_py1"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + spi2 { + nvidia,pins = "ulpi_data4_po5", + "ulpi_data7_po0"; + nvidia,function = "spi2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + spi4-out { + nvidia,pins = "gmi_ad6_pg6", + "gmi_wr_n_pi0"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + spi4-in { + nvidia,pins = "gmi_ad5_pg5", + "gmi_ad7_pg7"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* GPIO keys pinmux */ + hall-switch { nvidia,pins = "ulpi_data4_po5"; nvidia,function = "spi2"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - }; - gpio_keys_default: pinmux-gpio-keys-default { - power { + lineout-switch { + nvidia,pins = "gpio_x5_aud_px5"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + power-key { nvidia,pins = "kb_col0_pq0"; nvidia,function = "kbc"; nvidia,pull = <TEGRA_PIN_PULL_UP>; @@ -154,111 +479,722 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - volume { + volume-keys { nvidia,pins = "kb_row1_pr1", - "kb_row2_pr2"; + "kb_row2_pr2"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - }; - hp_det_default: pinmux-hp-det-default { - gmi_iordy_pi5 { - nvidia,pins = "kb_row7_pr7"; - nvidia,function = "rsvd2"; + /* Sensors pinmux */ + nct-irq { + nvidia,pins = "ulpi_data3_po4"; + nvidia,function = "ulpi"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - }; - imu_default: pinmux-imu-default { - kb_row3_pr3 { + mpu-irq { nvidia,pins = "kb_row3_pr3"; nvidia,function = "rsvd3"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - }; - pwm_default: pinmux-pwm-default { - gmi_ad9_ph1 { + /* HDMI pinmux */ + hdmi-hpd { + nvidia,pins = "hdmi_int_pn7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + hdmi-en { + nvidia,pins = "dap3_dout_pp2"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + hdmi-cec { + nvidia,pins = "hdmi_cec_pee3"; + nvidia,function = "cec"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* LED pinmux */ + backlight-pwm { nvidia,pins = "gmi_ad9_ph1"; nvidia,function = "pwm1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - }; - /* XXX make this something more sensible */ - pwm_sleep: pinmux-pwm-sleep { - gmi_ad9_ph1 { - nvidia,pins = "gmi_ad9_ph1"; + backlight-en { + nvidia,pins = "gmi_ad10_ph2"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Touchscreen pinmux */ + touch-irq { + nvidia,pins = "gmi_cs4_n_pk2"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + touch-rst { + nvidia,pins = "gmi_cs3_n_pk4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + touch-pwr { + nvidia,pins = "gmi_ad8_ph0"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + touch-vio { + nvidia,pins = "gmi_ad12_ph4"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* AUDIO pinmux */ + audio-ldo1 { + nvidia,pins = "sdmmc1_wp_n_pv3"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + hp-detect { + nvidia,pins = "kb_row7_pr7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + dap-i2s0-in { + nvidia,pins = "dap1_din_pn1"; + nvidia,function = "i2s0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + dap-i2s0-out { + nvidia,pins = "dap1_dout_pn2", + "dap1_fs_pn0", + "dap1_sclk_pn3"; + nvidia,function = "i2s0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + dap-i2s1-in { + nvidia,pins = "dap2_din_pa4"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + dap-i2s1-out { + nvidia,pins = "dap2_dout_pa5", + "dap2_fs_pa2", + "dap2_sclk_pa3"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + dap-i2s2-in { + nvidia,pins = "dap3_fs_pp0", + "dap3_sclk_pp3"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + dap-i2s2-out { + nvidia,pins = "dap3_din_pp1"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + spdif-in { + nvidia,pins = "spdif_in_pk6"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + spdif-out { + nvidia,pins = "spdif_out_pk5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* AsusEC pinmux */ + ec-irq { + nvidia,pins = "kb_col5_pq5"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + ec-req { + nvidia,pins = "kb_col2_pq2"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + hotplug-i2c { + nvidia,pins = "ulpi_data7_po0"; + nvidia,function = "spi2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + ps2-irq { + nvidia,pins = "gpio_w2_aud_pw2"; + nvidia,function = "spi6"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + kbd-irq { + nvidia,pins = "gmi_cs0_n_pj0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + dvfs-pin { + nvidia,pins = "dvfs_pwm_px0", + "dvfs_clk_px2"; + nvidia,function = "cldvfs"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Core pinmux */ + clk-32k-out { + nvidia,pins = "clk_32k_out_pa0"; + nvidia,function = "soc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + sys-clk-req { + nvidia,pins = "sys_clk_req_pz5"; + nvidia,function = "sysclk"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + core-pwr-req { + nvidia,pins = "core_pwr_req"; + nvidia,function = "pwron"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + cpu-pwr-req { + nvidia,pins = "cpu_pwr_req"; + nvidia,function = "cpu"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + pwr-int-n { + nvidia,pins = "pwr_int_n"; + nvidia,function = "pmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + clk-32k-in { + nvidia,pins = "clk_32k_in"; + nvidia,function = "clk"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + owr { + nvidia,pins = "owr"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + reset-out-n { + nvidia,pins = "reset_out_n"; + nvidia,function = "reset_out_n"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* ULPI pinmux */ + ulpi-data0-6 { + nvidia,pins = "ulpi_data0_po1", + "ulpi_data6_po7"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + ulpi-data1-5 { + nvidia,pins = "ulpi_data1_po2", + "ulpi_data5_po6"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + ulpi-data2-3 { + nvidia,pins = "ulpi_data2_po3", + "ulpi_data3_po4"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* PORT V */ + pv0-gpio { + nvidia,pins = "pv0"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + pv1-gpio { + nvidia,pins = "pv1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* PORT U */ + pu0-gpio { + nvidia,pins = "pu0"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + pu2-gpio { + nvidia,pins = "pu2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* PWM pinmux */ + pwm0 { + nvidia,pins = "pu3"; + nvidia,function = "pwm0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + pwm1 { + nvidia,pins = "pu4"; nvidia,function = "pwm1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - }; - sdmmc3_default: pinmux-sdmmc3-default { - drive_sdio3 { - nvidia,pins = "drive_sdio3"; - nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; - nvidia,schmitt = <TEGRA_PIN_DISABLE>; - nvidia,pull-down-strength = <22>; - nvidia,pull-up-strength = <36>; - nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; - nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; + /* EXTPERIPH pinmux */ + clk1-out { + nvidia,pins = "clk1_out_pw4"; + nvidia,function = "extperiph1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - sdmmc3_clk_pa6 { - nvidia,pins = "sdmmc3_clk_pa6"; - nvidia,function = "sdmmc3"; + clk2-out { + nvidia,pins = "clk2_out_pw5"; + nvidia,function = "extperiph2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + clk3-out { + nvidia,pins = "clk3_out_pee0"; + nvidia,function = "extperiph3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + clk1-req { + nvidia,pins = "clk1_req_pee2"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* GMI pinmux */ + gmi-wp-n { + nvidia,pins = "gmi_wp_n_pc7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc3_cmd_pa7 { - nvidia,pins = "sdmmc3_cmd_pa7", - "sdmmc3_dat0_pb7", - "sdmmc3_dat1_pb6", - "sdmmc3_dat2_pb5", - "sdmmc3_dat3_pb4", - "kb_col4_pq4", - "sdmmc3_clk_lb_out_pee4", - "sdmmc3_clk_lb_in_pee5", - "sdmmc3_cd_n_pv2"; - nvidia,function = "sdmmc3"; + gmi-adv { + nvidia,pins = "gmi_adv_n_pk0"; + nvidia,function = "rsvd1"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - }; - sdmmc3_vdd_default: pinmux-sdmmc3-vdd-default { - gmi_clk_pk1 { - nvidia,pins = "gmi_clk_pk1"; + gmi-ad0-ad1 { + nvidia,pins = "gmi_ad0_pg0", + "gmi_ad1_pg1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + gmi-ad2-ad3 { + nvidia,pins = "gmi_ad2_pg2", + "gmi_ad3_pg3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + gmi-iordy { + nvidia,pins = "gmi_iordy_pi5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + gmi-a18 { + nvidia,pins = "gmi_a18_pb1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + gmi-wait { + nvidia,pins = "gmi_wait_pi7"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + gmi-cs6-n { + nvidia,pins = "gmi_cs6_n_pi3"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + gmi-cs7-n { + nvidia,pins = "gmi_cs7_n_pi6"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + gmi-dqs-p { + nvidia,pins = "gmi_dqs_p_pj3"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + gmi-cs2-ad { + nvidia,pins = "gmi_cs2_n_pk3", + "gmi_ad14_ph6", + "gmi_ad15_ph7"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + gmi-cs4-clk { + nvidia,pins = "gmi_cs4_n_pk2", + "gmi_clk_lb"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + gmi-ad11 { + nvidia,pins = "gmi_ad11_ph3"; nvidia,function = "gmi"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - }; - vdd_lcd_default: pinmux-vdd-lcd-default { - sdmmc4_clk_pcc4 { - nvidia,pins = "sdmmc4_clk_pcc4"; - nvidia,function = "sdmmc4"; + gmi-cs1-oe { + nvidia,pins = "gmi_cs1_n_pj2", + "gmi_oe_n_pi1"; + nvidia,function = "soc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + gmi-ad4 { + nvidia,pins = "gmi_ad4_pg4"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + gmi-ad13 { + nvidia,pins = "gmi_ad13_ph5"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + gmi-rst-n { + nvidia,pins = "gmi_rst_n_pi4"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* PORT CC */ + pcc-gpio { + nvidia,pins = "pcc1", "pcc2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* PORT BB */ + pbb3-gpio { + nvidia,pins = "pbb3"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + pbb4-5-6-gpio { + nvidia,pins = "pbb4", "pbb5", "pbb6"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + pbb7-gpio { + nvidia,pins = "pbb7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* KBC pinmux */ + kb-r0-c1 { + nvidia,pins = "kb_row0_pr0", + "kb_col1_pq1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + kb-row4 { + nvidia,pins = "kb_row4_pr4"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + kb-row5 { + nvidia,pins = "kb_row5_pr5"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + kb-row6 { + nvidia,pins = "kb_row6_pr6"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + kb-r8-c3 { + nvidia,pins = "kb_row8_ps0", + "kb_col3_pq3"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* VI pinmux */ + cam-mclk { + nvidia,pins = "cam_mclk_pcc0", + "pbb0"; + nvidia,function = "vi_alt3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; + + /* AUD pinmux */ + gpio-x4-aud { + nvidia,pins = "gpio_x4_aud_px4"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + gpio-x1-aud { + nvidia,pins = "gpio_x1_aud_px1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + gpio-x3-aud { + nvidia,pins = "gpio_x3_aud_px3"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + gpio-x6-aud { + nvidia,pins = "gpio_x6_aud_px6"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + usb-vbus { + nvidia,pins = "usb_vbus_en0_pn4", + "usb_vbus_en1_pn5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* GPIO power/drive control */ + drive-sdio1 { + nvidia,pins = "drive_sdio1"; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,pull-down-strength = <36>; + nvidia,pull-up-strength = <20>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOW>; + }; + + drive-sdio3 { + nvidia,pins = "drive_sdio3"; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,pull-down-strength = <22>; + nvidia,pull-up-strength = <36>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; + }; + + drive-gma { + nvidia,pins = "drive_gma"; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,pull-down-strength = <2>; + nvidia,pull-up-strength = <2>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; + }; }; }; @@ -267,7 +1203,33 @@ }; serial@70006200 { - /* Bluetooth */ + compatible = "nvidia,tegra114-hsuart", "nvidia,tegra30-hsuart"; + reset-names = "serial"; + /delete-property/ reg-shift; + status = "okay"; + + nvidia,adjust-baud-rates = <0 9600 100>, + <9600 115200 200>, + <1000000 4000000 136>; + + bluetooth { + compatible = "brcm,bcm4334-bt"; + max-speed = <4000000>; + + clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>; + clock-names = "txco"; + + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>; + interrupt-names = "host-wakeup"; + + device-wakeup-gpios = <&gpio TEGRA_GPIO(EE, 1) GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio TEGRA_GPIO(Q, 7) GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio TEGRA_GPIO(Q, 6) GPIO_ACTIVE_LOW>; + + vbat-supply = <&vdd_3v3_com>; + vddio-supply = <&vdd_1v8_vio>; + }; }; serial@70006300 { @@ -278,10 +1240,6 @@ pwm@7000a000 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&pwm_default>; - pinctrl-1 = <&pwm_sleep>; }; i2c@7000c000 { @@ -292,27 +1250,35 @@ compatible = "asahi-kasei,ak09911"; reg = <0xc>; - vdd-supply = <&vdd_3v3_sys>; + /* no DRDY (polling) */ + + vdd-supply = <&vdd_2v85_sen>; + vid-supply = <&vdd_1v8_vio>; + + mount-matrix = "0", "1", "0", + "1", "0", "0", + "0", "0","-1"; }; rt5639: audio-codec@1c { compatible = "realtek,rt5639"; reg = <0x1c>; - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>; - - realtek,ldo1-en-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; + realtek,ldo1-en-gpios = + <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&codec_default>; + clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + clock-names = "mclk"; }; temp_sensor: temperature-sensor@4c { compatible = "onnn,nct1008"; reg = <0x4c>; - vcc-supply = <&vdd_3v3_sys>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_EDGE_FALLING>; + + vcc-supply = <&vdd_1v8_vio>; #thermal-sensor-cells = <1>; }; @@ -323,12 +1289,12 @@ interrupt-parent = <&gpio>; interrupts = <TEGRA_GPIO(R, 3) IRQ_TYPE_LEVEL_HIGH>; + vdd-supply = <&vdd_2v85_sen>; + vddio-supply = <&vdd_1v8_vio>; + mount-matrix = "0", "-1", "0", "1", "0", "0", "0", "0", "1"; - - pinctrl-names = "default"; - pinctrl-0 = <&imu_default>; }; }; @@ -339,6 +1305,8 @@ power-sensor@44 { compatible = "ti,ina230"; reg = <0x44>; + + shunt-resistor = <5000>; }; }; @@ -350,12 +1318,13 @@ compatible = "dynaimage,al3320a"; reg = <0x1c>; - vdd-supply = <&vdd_3v3_sys>; + vdd-supply = <&vdd_1v8_vio>; }; }; - i2c@7000c700 { - /* HDMI DDC */ + hdmi_ddc: i2c@7000c700 { + status = "okay"; + clock-frequency = <10000>; }; i2c@7000d000 { @@ -372,12 +1341,36 @@ ti,system-power-controller; + palmas_gpadc: adc { + compatible = "ti,palmas-gpadc"; + interrupts = <18 IRQ_TYPE_NONE>, + <16 IRQ_TYPE_NONE>, + <17 IRQ_TYPE_NONE>; + + ti,channel0-current-microamp = <5>; + ti,channel3-current-microamp = <400>; + ti,enable-extended-delay; + + #io-channel-cells = <1>; + }; + + palmas_extcon: extcon { + compatible = "ti,palmas-usb-vid"; + ti,enable-vbus-detection; + ti,enable-id-detection; + }; + palmas_gpio: gpio { compatible = "ti,palmas-gpio"; gpio-controller; #gpio-cells = <2>; }; + palmas_clk32kg@0 { + compatible = "ti,palmas-clk32kg"; + #clock-cells = <0>; + }; + pinmux { compatible = "ti,tps65913-pinctrl"; ti,palmas-enable-dvfs1; @@ -441,17 +1434,18 @@ pmic { compatible = "ti,tps65913-pmic", "ti,palmas-pmic"; - ldo1-in-supply = <&tps65913_smps7>; - ldo2-in-supply = <&tps65913_smps7>; - ldo4-in-supply = <&tps65913_smps8>; - ldo5-in-supply = <&tps65913_smps9>; - ldo6-in-supply = <&tps65913_smps9>; - ldo7-in-supply = <&tps65913_smps9>; - ldo9-in-supply = <&tps65913_smps9>; + ldo1-in-supply = <&vddio_ddr>; + ldo2-in-supply = <&vddio_ddr>; + ldo4-in-supply = <&vdd_1v8_vio>; + ldo5-in-supply = <&vcore_emmc>; + ldo6-in-supply = <&vcore_emmc>; + ldo7-in-supply = <&vcore_emmc>; + ldo9-in-supply = <&vcore_emmc>; + ldoln-in-supply = <&vdd_smps10_out2>; regulators { - tps65913_smps123: smps123 { - regulator-name = "vdd-cpu"; + vdd_cpu: smps123 { + regulator-name = "vdd_cpu"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1350000>; regulator-always-on; @@ -460,8 +1454,8 @@ ti,mode-sleep = <3>; }; - tps65913_smps45: smps45 { - regulator-name = "vdd-core"; + vdd_core: smps45 { + regulator-name = "vdd_core"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1400000>; regulator-always-on; @@ -469,101 +1463,95 @@ ti,roof-floor = <3>; }; - smps6 { - regulator-name = "va-lcd-hv"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - }; + /* smps6 disabled */ - tps65913_smps7: smps7 { - regulator-name = "vdd-ddr"; + vddio_ddr: smps7 { + regulator-name = "vddio_ddr"; regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; regulator-always-on; regulator-boot-on; }; - tps65913_smps8: smps8 { - regulator-name = "vdd-1v8"; + vdd_1v8_vio: smps8 { + regulator-name = "vdd_1v8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on; }; - tps65913_smps9: smps9 { - regulator-name = "vdd-sd"; + vcore_emmc: smps9 { + regulator-name = "vdd_emmc"; regulator-min-microvolt = <2900000>; regulator-max-microvolt = <2900000>; - regulator-always-on; + regulator-boot-on; }; - tps65913_smps10_out1: smps10_out1 { - regulator-name = "vd-smps10-out1"; + smps10_out1 { + regulator-name = "vd_smps10_out1"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; regulator-boot-on; }; - tps65913_smps10_out2: smps10_out2 { - regulator-name = "vd-smps10-out2"; + vdd_smps10_out2: smps10_out2 { + regulator-name = "vd_smps10_out2"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; regulator-boot-on; }; - tps65913_ldo1: ldo1 { - regulator-name = "vdd-hdmi-pll"; + avdd_hdmi_pll: ldo1 { + regulator-name = "avdd_hdmi_pll"; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; regulator-always-on; + regulator-boot-on; ti,roof-floor = <3>; }; - tps65913_ldo2: ldo2 { - regulator-name = "vdd-2v8-dsi-csi"; + avdd_dsi_csi: ldo2 { + regulator-name = "avdd_dsi_csi"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-boot-on; }; ldo3 { - regulator-name = "vpp-fuse"; + regulator-name = "vpp_fuse"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - ldo4 { - regulator-name = "vdd-1v2-cam"; + vdd_1v2_cam: ldo4 { + regulator-name = "vdd_1v2_cam"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; - ldo5 { - regulator-name = "vdd-cam"; + avdd_2v8_cam: ldo5 { + regulator-name = "avdd_cam2"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; }; - ldo6 { - regulator-name = "vdd-dev"; + vdd_2v85_sen: ldo6 { + regulator-name = "vdd_dev"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; - regulator-boot-on; }; - ldo7 { - regulator-name = "vdd-2v8-cam"; + avdd_2v8_af: ldo7 { + regulator-name = "avdd_2v8_cam"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; }; - tps65913_ldo8: ldo8 { - regulator-name = "vdd-rtc"; + ldo8 { + regulator-name = "vdd_rtc"; regulator-min-microvolt = <950000>; regulator-max-microvolt = <950000>; regulator-always-on; @@ -571,23 +1559,24 @@ ti,enable-ldo8-tracking; }; - tps65913_ldo9: ldo9 { - regulator-name = "vdd-sdmmc"; - regulator-min-microvolt = <1800000>; + vddio_usd: ldo9 { + regulator-name = "vddio_usd"; + /* min voltage of 1.8v is not stable */ + regulator-min-microvolt = <2900000>; regulator-max-microvolt = <2900000>; }; - tps65913_ldoln: ldoln { - regulator-name = "vdd-hdmi"; + avdd_hdmi: ldoln { + regulator-name = "avdd_hdmi"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-boot-on; }; - ldousb { - regulator-name = "vdd-usb"; + avdd_usb: ldousb { + regulator-name = "avdd_usb"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-always-on; regulator-boot-on; }; }; @@ -596,19 +1585,89 @@ rtc { compatible = "ti,palmas-rtc"; interrupt-parent = <&palmas>; - interrupts = <8 0>; + interrupts = <8 IRQ_TYPE_NONE>; }; }; }; + pmc@7000e400 { + status = "okay"; + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <300>; + nvidia,cpu-pwr-off-time = <300>; + nvidia,core-pwr-good-time = <641 3845>; + nvidia,core-pwr-off-time = <2000>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + + /* Clear DEV_ON bit in DEV_CTRL register of TPS65913 PMIC */ + i2c-thermtrip { + nvidia,i2c-controller-id = <4>; + nvidia,bus-addr = <0x58>; + nvidia,reg-addr = <0xA0>; + nvidia,reg-data = <0x00>; + }; + }; + ahub@70080000 { - i2s@70080300 { + /* HIFI CODEC (i2s1) */ + i2s@70080400 { status = "okay"; }; + + /* BT SCO (i2s3) */ + i2s@70080600 { + status = "okay"; + }; + }; + + brcm_wifi_pwrseq: pwrseq-wifi { + compatible = "mmc-pwrseq-simple"; + + clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>; + clock-names = "ext_clock"; + + reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>; + post-power-on-delay-ms = <300>; + power-off-delay-us = <300>; }; + /* WiFi */ mmc@78000000 { - /* WiFi */ + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + assigned-clocks = <&tegra_car TEGRA114_CLK_SDMMC1>; + assigned-clock-parents = <&tegra_car TEGRA114_CLK_PLL_P>; + assigned-clock-rates = <82000000>; + + max-frequency = <82000000>; + keep-power-in-suspend; + bus-width = <4>; + non-removable; + + sd-uhs-ddr50; + mmc-ddr-1_8v; + + power-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>; + + nvidia,default-tap = <0x2>; + nvidia,default-trim = <0x2>; + + mmc-pwrseq = <&brcm_wifi_pwrseq>; + vmmc-supply = <&vdd_3v3_com>; + vqmmc-supply = <&vdd_1v8_vio>; + + wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(U, 5) IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + }; }; /* MicroSD card */ @@ -621,33 +1680,38 @@ nvidia,default-tap = <0x3>; nvidia,default-trim = <0x3>; - vmmc-supply = <&vdd_usd>; - vqmmc-supply = <&tps65913_ldo9>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc3_default>; + vmmc-supply = <&vdd_2v9_usd>; + vqmmc-supply = <&vddio_usd>; }; + /* eMMC */ mmc@78000600 { - /* eMMC */ + status = "okay"; + bus-width = <8>; + + non-removable; + mmc-ddr-1_8v; + + vmmc-supply = <&vcore_emmc>; + vqmmc-supply = <&vdd_1v8_vio>; }; + /* Peripheral USB via ASUS connector */ usb@7d000000 { compatible = "nvidia,tegra114-udc"; status = "okay"; dr_mode = "peripheral"; - - /* Peripheral USB via ASUS connector */ }; usb-phy@7d000000 { status = "okay"; + dr_mode = "peripheral"; + vbus-supply = <&avdd_usb>; }; + /* Host USB via dock */ usb@7d008000 { status = "okay"; - - /* Host USB via dock */ }; usb-phy@7d008000 { @@ -658,16 +1722,12 @@ backlight: backlight { compatible = "pwm-backlight"; - enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; - power-supply = <&vdd_5v0_sys>; + power-supply = <&vdd_3v7_bl>; pwms = <&pwm 1 1000000>; brightness-levels = <1 255>; num-interpolated-steps = <254>; default-brightness-level = <224>; - - pinctrl-names = "default"; - pinctrl-0 = <&backlight_default>; }; /* PMIC has a built-in 32KHz oscillator which is used by PMC */ @@ -678,13 +1738,22 @@ clock-output-names = "pmic-oscillator"; }; - gpio-hall-sensor { - compatible = "gpio-keys"; + connector { + compatible = "hdmi-connector"; + type = "d"; - label = "GPIO Hall Effect Sensor"; + hpd-gpios = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + ddc-i2c-bus = <&hdmi_ddc>; - pinctrl-names = "default"; - pinctrl-0 = <&gpio_hall_sensor_default>; + port { + connector_in: endpoint { + remote-endpoint = <&hdmi_out>; + }; + }; + }; + + extcon-keys { + compatible = "gpio-keys"; switch-hall-sensor { label = "Hall Effect Sensor"; @@ -694,17 +1763,20 @@ linux,can-disable; wakeup-source; }; + + switch-lineout-detect { + label = "Audio dock line-out detect"; + gpios = <&gpio TEGRA_GPIO(X, 5) GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LINEOUT_INSERT>; + debounce-interval = <10>; + }; }; gpio-keys { compatible = "gpio-keys"; - label = "GPIO Buttons"; - - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_default>; - - button-power { + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; @@ -712,14 +1784,14 @@ wakeup-source; }; - button-volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; debounce-interval = <10>; }; - button-volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; @@ -739,13 +1811,16 @@ "Speakers", "SPORN", "Speakers", "SPOLP", "Speakers", "SPOLN", - "Mic Jack", "MICBIAS1", - "IN2P", "Mic Jack"; + "IN1P", "Mic Jack", + "IN1N", "Mic Jack", + "DMIC1", "Int Mic", + "DMIC2", "Int Mic"; - nvidia,i2s-controller = <&tegra_i2s0>; + nvidia,i2s-controller = <&tegra_i2s1>; nvidia,audio-codec = <&rt5639>; nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_LOW>; + nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_HIGH>; clocks = <&tegra_car TEGRA114_CLK_PLL_A>, <&tegra_car TEGRA114_CLK_PLL_A_OUT0>, @@ -757,14 +1832,11 @@ assigned-clock-parents = <&tegra_car TEGRA114_CLK_PLL_A_OUT0>, <&tegra_car TEGRA114_CLK_EXTERN1>; - - pinctrl-names = "default"; - pinctrl-0 = <&hp_det_default>; }; vdd_5v0_sys: regulator-5v0-sys { compatible = "regulator-fixed"; - regulator-name = "vdd_5v0"; + regulator-name = "vdd_5v0_sys"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; @@ -773,37 +1845,119 @@ vdd_3v3_sys: regulator-3v3-sys { compatible = "regulator-fixed"; - regulator-name = "vdd_3v3"; + regulator-name = "vdd_3v3_sys"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; regulator-boot-on; }; - vdd_lcd: regulator-vdd-lcd { + dvdd_1v8_lcd: regulator-vdd-lcd { compatible = "regulator-fixed"; - regulator-name = "vdd_lcd_1v8"; + regulator-name = "dvdd_1v8_lcd"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - vin-supply = <&tps65913_smps8>; + regulator-boot-on; + gpio = <&palmas_gpio 4 GPIO_ACTIVE_HIGH>; enable-active-high; - gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>; + vin-supply = <&vdd_1v8_vio>; + }; + + vdd_3v7_bl: regulator-bl-en { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v7_bl"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; regulator-boot-on; + gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; - pinctrl-names = "default"; - pinctrl-0 = <&vdd_lcd_default>; + hdmi_5v0_sys: regulator-hdmi { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v0_hdmi"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_smps10_out2>; }; - vdd_usd: regulator-vdd-usd { + vdd_2v9_usd: regulator-vdd-usd { compatible = "regulator-fixed"; regulator-name = "vdd_sd_slot"; regulator-min-microvolt = <2900000>; regulator-max-microvolt = <2900000>; - vin-supply = <&tps65913_smps9>; - enable-active-high; + regulator-boot-on; gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vcore_emmc>; + }; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc3_vdd_default>; + vdd_1v8_cam: regulator-cam-vio { + compatible = "regulator-fixed"; + regulator-name = "vdd_1v8_cam"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + gpio = <&palmas_gpio 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_1v8_vio>; + }; + + vdd_1v2_xusb: regulator-xusb-vio { + compatible = "regulator-fixed"; + regulator-name = "avddio_1v2_xusb"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + gpio = <&palmas_gpio 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vdd_3v3_xusb: regulator-xusb-vdd { + compatible = "regulator-fixed"; + regulator-name = "hvdd_3v3_xusb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + gpio = <&palmas_gpio 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vdd_3v3_com: regulator-com { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3_com"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; + + vdd_3v3_touch: regulator-touch-pwr { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3_touch"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + gpio = <&gpio TEGRA_GPIO(H, 0) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; + + vdd_1v8_touch: regulator-touch-vio { + compatible = "regulator-fixed"; + regulator-name = "vdd_1v8_touch"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + gpio = <&gpio TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; }; }; diff --git a/arch/arm/boot/dts/nvidia/tegra20-trimslice.dts b/arch/arm/boot/dts/nvidia/tegra20-trimslice.dts index 7cae6ad57544..4caeeb9f1e1d 100644 --- a/arch/arm/boot/dts/nvidia/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/nvidia/tegra20-trimslice.dts @@ -2,6 +2,7 @@ /dts-v1/; #include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> #include "tegra20.dtsi" #include "tegra20-cpu-opp.dtsi" @@ -201,16 +202,17 @@ conf_ata { nvidia,pins = "ata", "atc", "atd", "ate", "crtp", "dap2", "dap3", "dap4", "dta", - "dtb", "dtc", "dtd", "dte", "gmb", - "gme", "i2cp", "pta", "slxc", "slxd", - "spdi", "spdo", "uda"; + "dtb", "dtc", "dtd", "gmb", "gme", + "i2cp", "pta", "slxc", "slxd", "spdi", + "spdo", "uda"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_atb { nvidia,pins = "atb", "cdev1", "cdev2", "dap1", - "gma", "gmc", "gmd", "gpu", "gpu7", - "gpv", "sdio1", "slxa", "slxk", "uac"; + "dte", "gma", "gmc", "gmd", "gpu", + "gpu7", "gpv", "sdio1", "slxa", "slxk", + "uac"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; @@ -408,6 +410,24 @@ }; }; + leds { + compatible = "gpio-leds"; + + led-ds2 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; + gpios = <&gpio TEGRA_GPIO(D, 2) GPIO_ACTIVE_LOW>; + }; + + led-ds3 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <3>; + gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_LOW>; + }; + }; + poweroff { compatible = "gpio-poweroff"; gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/nxp/imx/imx1.dtsi b/arch/arm/boot/dts/nxp/imx/imx1.dtsi index 389ecb1ebf8f..a1a89ccacf05 100644 --- a/arch/arm/boot/dts/nxp/imx/imx1.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx1.dtsi @@ -134,7 +134,7 @@ clock-names = "ipg", "per"; }; - dma: dma@209000 { + dma: dma-controller@209000 { compatible = "fsl,imx1-dma"; reg = <0x00209000 0x1000>; interrupts = <61 60>; diff --git a/arch/arm/boot/dts/nxp/imx/imx27.dtsi b/arch/arm/boot/dts/nxp/imx/imx27.dtsi index ec3ccc8f4095..989b7659b669 100644 --- a/arch/arm/boot/dts/nxp/imx/imx27.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx27.dtsi @@ -88,7 +88,7 @@ reg = <0x10000000 0x20000>; ranges; - dma: dma@10001000 { + dma: dma-controller@10001000 { compatible = "fsl,imx27-dma"; reg = <0x10001000 0x1000>; interrupts = <32>; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts b/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts index 2117de872703..0d336cbdb451 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts @@ -175,8 +175,8 @@ gpio-controller; }; - sensor2: lm75@49 { - compatible = "lm75"; + sensor2: temperature-sensor@49 { + compatible = "national,lm75b"; reg = <0x49>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-qsb-hdmi.dtso b/arch/arm/boot/dts/nxp/imx/imx53-qsb-hdmi.dtso index 151e9cee3c87..2527bfe13145 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-qsb-hdmi.dtso +++ b/arch/arm/boot/dts/nxp/imx/imx53-qsb-hdmi.dtso @@ -34,9 +34,7 @@ &display0 { status = "okay"; -}; -&display0 { port@1 { display0_out: endpoint { remote-endpoint = <&sii9022_in>; @@ -83,7 +81,3 @@ &panel_dpi { status = "disabled"; }; - -&tve { - status = "disabled"; -}; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-tqma53.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-tqma53.dtsi index b2d7271d1d24..c34ee84bd716 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-tqma53.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx53-tqma53.dtsi @@ -254,8 +254,8 @@ interrupts = <6 4>; /* PATA_DATA6, active high */ }; - sensor1: lm75@48 { - compatible = "lm75"; + sensor1: temperature-sensor@48 { + compatible = "national,lm75b"; reg = <0x48>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts b/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts index 95b49fc83f7b..299106fbe51c 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts @@ -127,12 +127,21 @@ }; }; + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + + spdif_in: spdif-in { + compatible = "linux,spdif-dir"; + #sound-dai-cells = <0>; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "imx-spdif"; - spdif-controller = <&spdif>; - spdif-out; - spdif-in; + audio-cpu = <&spdif>; + audio-codec = <&spdif_out>, <&spdif_in>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts b/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts index a7d5693c5ab7..8d2b608e0b90 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts @@ -111,12 +111,21 @@ }; }; + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + + spdif_in: spdif-in { + compatible = "linux,spdif-dir"; + #sound-dai-cells = <0>; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "imx-spdif"; - spdif-controller = <&spdif>; - spdif-in; - spdif-out; + audio-cpu = <&spdif>; + audio-codec = <&spdif_out>, <&spdif_in>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts index 7c298d9aa21e..5353a0c24420 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts @@ -90,11 +90,16 @@ ssi-controller = <&ssi1>; }; + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "On-board SPDIF"; - spdif-controller = <&spdif>; - spdif-out; + audio-cpu = <&spdif>; + audio-codec = <&spdif_out>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi index ea40623d12e5..edf55760a5c1 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi @@ -197,11 +197,20 @@ ssi-controller = <&ssi1>; }; + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + + spdif_in: spdif-in { + compatible = "linux,spdif-dir"; + #sound-dai-cells = <0>; + }; + sound_spdif: sound-spdif { compatible = "fsl,imx-audio-spdif"; - spdif-controller = <&spdif>; - spdif-in; - spdif-out; + audio-cpu = <&spdif>; + audio-codec = <&spdif_out>, <&spdif_in>; model = "imx-spdif"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apf6dev.dtsi index 3a46ade3b6bd..9e97ef5e43f2 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-apf6dev.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apf6dev.dtsi @@ -121,11 +121,16 @@ mux-ext-port = <3>; }; + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "imx-spdif"; - spdif-controller = <&spdif>; - spdif-out; + audio-cpu = <&spdif>; + audio-codec = <&spdif_out>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi index 758eaf9d93d2..f7fac86f0a6b 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi @@ -506,7 +506,7 @@ >; }; - pinctrl_gpmi_nand: gpmi-nand { + pinctrl_gpmi_nand: gpminandgrp { fsl,pins = < MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi index d3a7a6eeb8e0..b01670cdd52c 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi @@ -142,12 +142,21 @@ ssi-controller = <&ssi1>; }; + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + + spdif_in: spdif-in { + compatible = "linux,spdif-dir"; + #sound-dai-cells = <0>; + }; + /* Optional S/PDIF in on SODIMM 88 and out on SODIMM 90, 137 or 168 */ sound_spdif: sound-spdif { compatible = "fsl,imx-audio-spdif"; - spdif-controller = <&spdif>; - spdif-in; - spdif-out; + audio-cpu = <&spdif>; + audio-codec = <&spdif_out>, <&spdif_in>; model = "imx-spdif"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi index 761566ae3cf5..bd66430c1d78 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi @@ -100,12 +100,17 @@ vin-supply = <&v_5v0>; }; + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "Integrated SPDIF"; /* IMX6 doesn't implement this yet */ - spdif-controller = <&spdif>; - spdif-out; + audio-cpu = <&spdif>; + audio-codec = <&spdif_out>; }; gpio-keys { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi index 082a2e3a391f..b57f4073f881 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi @@ -761,7 +761,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x170b9 @@ -774,7 +774,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi index 8ec442038ea0..090c0057d117 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi @@ -750,7 +750,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 @@ -763,7 +763,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi index 9df9f79affae..0ed6d25024a2 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi @@ -833,7 +833,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 @@ -846,7 +846,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi index 7f16c602cc07..c6e231de674a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi @@ -704,7 +704,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 @@ -717,7 +717,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi index 7693f92195d5..d0f648938cae 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi @@ -896,7 +896,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 @@ -909,7 +909,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi index 9d0836df0fed..71911df881cc 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi @@ -680,7 +680,7 @@ >; }; - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp { fsl,pins = < MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x4001b0b0 /* EMMY_EN */ MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x4001b0b0 /* EMMY_CFG1# */ @@ -710,7 +710,7 @@ >; }; - pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp { fsl,pins = < MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9 @@ -723,7 +723,7 @@ >; }; - pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp { fsl,pins = < MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9 @@ -752,7 +752,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 @@ -768,7 +768,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi index f4cb9e1d34a9..716c324a7458 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi @@ -817,7 +817,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 @@ -833,7 +833,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi index 424dc7fcd533..453dee4d9227 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi @@ -629,7 +629,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x170b9 @@ -642,7 +642,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5912.dtsi index 49ea25c71967..add700bc11cc 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5912.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5912.dtsi @@ -569,7 +569,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 @@ -582,7 +582,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi index a955c77cd499..d1ad65ab6b72 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi @@ -140,12 +140,17 @@ }; }; + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "On-board SPDIF"; /* IMX6 doesn't implement this yet */ - spdif-controller = <&spdif>; - spdif-out; + audio-cpu = <&spdif>; + audio-codec = <&spdif_out>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-icore-rqs.dtsi index d339957cc097..dff184a119f3 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-icore-rqs.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-icore-rqs.dtsi @@ -397,7 +397,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170B1 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100B1 @@ -408,7 +408,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170F9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100F9 @@ -434,7 +434,7 @@ >; }; - pinctrl_usdhc4_100mhz: usdhc4grp_100mhz { + pinctrl_usdhc4_100mhz: usdhc4-100mhz-grp { fsl,pins = < MX6QDL_PAD_SD4_CMD__SD4_CMD 0x170B1 MX6QDL_PAD_SD4_CLK__SD4_CLK 0x100B1 @@ -449,7 +449,7 @@ >; }; - pinctrl_usdhc4_200mhz: usdhc4grp_200mhz { + pinctrl_usdhc4_200mhz: usdhc4-200mhz-grp { fsl,pins = < MX6QDL_PAD_SD4_CMD__SD4_CMD 0x170F9 MX6QDL_PAD_SD4_CLK__SD4_CLK 0x100F9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6a.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6a.dtsi index 807f3c95e3ce..aca320ee8f47 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6a.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6a.dtsi @@ -13,7 +13,7 @@ &i2c1 { lm75: temperature-sensor@49 { - compatible = "national,lm75"; + compatible = "national,lm75a"; reg = <0x49>; vs-supply = <®_mba6_3p3v>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6b.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6b.dtsi index 789733a45b95..c7bbd6195fef 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6b.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6b.dtsi @@ -23,7 +23,7 @@ &i2c3 { lm75: temperature-sensor@49 { - compatible = "national,lm75"; + compatible = "national,lm75a"; reg = <0x49>; vs-supply = <®_mba6_3p3v>; }; @@ -50,12 +50,3 @@ reg = <0x68>; }; }; - -&iomuxc { - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b899 - MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b899 - >; - }; -}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi index 0a3deaf92eea..35b6bec7a3fa 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi @@ -143,12 +143,17 @@ "AIN2R", "Line In Jack"; }; + spdif_in: spdif-in { + compatible = "linux,spdif-dir"; + #sound-dai-cells = <0>; + }; + sound-spdif { compatible = "fsl,imx-sabreauto-spdif", "fsl,imx-audio-spdif"; model = "imx-spdif"; - spdif-controller = <&spdif>; - spdif-in; + audio-cpu = <&spdif>; + audio-codec = <&spdif_in>; }; backlight { @@ -690,7 +695,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 @@ -705,7 +710,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6.dtsi index 344ea935c7da..6152a9ed4768 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6.dtsi @@ -59,20 +59,6 @@ >; }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b899 - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899 - >; - }; - - pinctrl_i2c3_recovery: i2c3recoverygrp { - fsl,pins = < - MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x4001b899 - MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b899 - >; - }; - pinctrl_pmic: pmicgrp { fsl,pins = < MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b099 /* PMIC irq */ diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6a.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6a.dtsi index 68525f0205d3..828996382f24 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6a.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6a.dtsi @@ -27,8 +27,8 @@ reg = <0x08>; }; - sensor@48 { - compatible = "national,lm75"; + temperature-sensor@48 { + compatible = "national,lm75a"; reg = <0x48>; vs-supply = <®_3p3v>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6b.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6b.dtsi index aeba0a273600..1d0966b8d99e 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6b.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6b.dtsi @@ -20,8 +20,8 @@ reg = <0x08>; }; - sensor@48 { - compatible = "national,lm75"; + temperature-sensor@48 { + compatible = "national,lm75a"; reg = <0x48>; vs-supply = <®_3p3v>; }; @@ -33,3 +33,19 @@ vcc-supply = <®_3p3v>; }; }; + +&iomuxc { + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b899 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899 + >; + }; + + pinctrl_i2c3_recovery: i2c3recoverygrp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x4001b899 + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b899 + >; + }; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi index e2fe337f7d9e..5a194f4c0cb9 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi @@ -373,7 +373,7 @@ >; }; - pinctrl_disp0_1: disp0grp-1 { + pinctrl_disp0_1: disp0-1-grp { fsl,pins = < MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 @@ -406,7 +406,7 @@ >; }; - pinctrl_disp0_2: disp0grp-2 { + pinctrl_disp0_2: disp0-2-grp { fsl,pins = < MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-var-dart.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-dart.dtsi index 200559d7158d..d8283eade43e 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-var-dart.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-dart.dtsi @@ -346,7 +346,7 @@ >; }; - pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp { fsl,pins = < MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170B9 MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100B9 @@ -357,7 +357,7 @@ >; }; - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp { fsl,pins = < MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170F9 MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100F9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi index a1ea33c4eeb7..59833e8d11d8 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi @@ -436,7 +436,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp100mhzgrp { + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170B9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100B9 @@ -451,7 +451,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp200mhzgrp { + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170F9 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100F9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard.dtsi index 38abb6b50f6c..7130b9c3b3aa 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard.dtsi @@ -26,11 +26,16 @@ mux-ext-port = <3>; }; + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "imx-spdif"; - spdif-controller = <&spdif>; - spdif-out; + audio-cpu = <&spdif>; + audio-codec = <&spdif_out>; }; reg_1p5v: regulator-1p5v { diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-evk.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-evk.dts index 31eee0419af7..7c899291ab0d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sl-evk.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6sl-evk.dts @@ -457,7 +457,7 @@ >; }; - pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp { fsl,pins = < MX6SL_PAD_SD1_CMD__SD1_CMD 0x170b9 MX6SL_PAD_SD1_CLK__SD1_CLK 0x100b9 @@ -472,7 +472,7 @@ >; }; - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp { fsl,pins = < MX6SL_PAD_SD1_CMD__SD1_CMD 0x170f9 MX6SL_PAD_SD1_CLK__SD1_CLK 0x100f9 @@ -498,7 +498,7 @@ >; }; - pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp { fsl,pins = < MX6SL_PAD_SD2_CMD__SD2_CMD 0x170b9 MX6SL_PAD_SD2_CLK__SD2_CLK 0x100b9 @@ -509,7 +509,7 @@ >; }; - pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp { fsl,pins = < MX6SL_PAD_SD2_CMD__SD2_CMD 0x170f9 MX6SL_PAD_SD2_CLK__SD2_CLK 0x100f9 @@ -531,7 +531,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { fsl,pins = < MX6SL_PAD_SD3_CMD__SD3_CMD 0x170b9 MX6SL_PAD_SD3_CLK__SD3_CLK 0x100b9 @@ -542,7 +542,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { fsl,pins = < MX6SL_PAD_SD3_CMD__SD3_CMD 0x170f9 MX6SL_PAD_SD3_CLK__SD3_CLK 0x100f9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-warp.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-warp.dts index 9d7c8884892a..2545c0fe47c8 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sl-warp.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6sl-warp.dts @@ -166,7 +166,7 @@ >; }; - pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp { fsl,pins = < MX6SL_PAD_SD2_CMD__SD2_CMD 0x4170b9 MX6SL_PAD_SD2_CLK__SD2_CLK 0x4100b9 @@ -182,7 +182,7 @@ >; }; - pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp { fsl,pins = < MX6SL_PAD_SD2_CMD__SD2_CMD 0x4170f9 MX6SL_PAD_SD2_CLK__SD2_CLK 0x4100f9 @@ -209,7 +209,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { fsl,pins = < MX6SL_PAD_SD3_CMD__SD3_CMD 0x4170b9 MX6SL_PAD_SD3_CLK__SD3_CLK 0x4100b9 @@ -220,7 +220,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { fsl,pins = < MX6SL_PAD_SD3_CMD__SD3_CMD 0x4170f9 MX6SL_PAD_SD3_CLK__SD3_CLK 0x4100f9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-sabreauto.dts b/arch/arm/boot/dts/nxp/imx/imx6sx-sabreauto.dts index b0c27b9b0244..dfbfb8119bf3 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sx-sabreauto.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sabreauto.dts @@ -97,11 +97,16 @@ "AIN2R", "Line In Jack"; }; + spdif_in: spdif-in { + compatible = "linux,spdif-dir"; + #sound-dai-cells = <0>; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "imx-spdif"; - spdif-controller = <&spdif>; - spdif-in; + audio-cpu = <&spdif>; + audio-codec = <&spdif_in>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi index 7d4170c27732..277a6e039045 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi @@ -183,12 +183,17 @@ }; }; + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + sound-spdif { compatible = "fsl,imx6sx-sdb-spdif", "fsl,imx-audio-spdif"; model = "imx-spdif"; - spdif-controller = <&spdif>; - spdif-out; + audio-cpu = <&spdif>; + audio-codec = <&spdif_out>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx-udoo-neo.dtsi index 725d0b5cb55f..bbf792ac4896 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sx-udoo-neo.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6sx-udoo-neo.dtsi @@ -72,6 +72,11 @@ }; }; +&clks { + assigned-clocks = <&clks IMX6SX_CLK_ENET_REF>; + assigned-clock-rates = <50000000>; +}; + &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi index 9cfb99ac9e9d..b74ee8948a78 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi @@ -608,7 +608,7 @@ >; }; - pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp { fsl,pins = < MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 @@ -620,7 +620,7 @@ >; }; - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp { fsl,pins = < MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsbcexpress.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsbcexpress.dts index ad7f63ca521a..0d3b1ab82eab 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsbcexpress.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsbcexpress.dts @@ -112,7 +112,7 @@ >; }; - pinctrl_ecspi3_master: ecspi3grp1 { + pinctrl_ecspi3_master: ecspi3-1-grp { fsl,pins = < MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x10b0 MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x10b0 @@ -121,7 +121,7 @@ >; }; - pinctrl_ecspi3_slave: ecspi3grp2 { + pinctrl_ecspi3_slave: ecspi3-2-grp { fsl,pins = < MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x10b0 MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x10b0 diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsbcpro.dts index ed61ae8524fa..8aea8c99e2af 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsbcpro.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsbcpro.dts @@ -248,7 +248,7 @@ >; }; - pinctrl_ecspi1_master: ecspi1grp1 { + pinctrl_ecspi1_master: ecspi1-1-grp { fsl,pins = < MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x10b0 MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x10b0 @@ -309,7 +309,7 @@ >; }; - pinctrl_lcdif_dat0_17: lcdifdatgrp0-17 { + pinctrl_lcdif_dat0_17: lcdifdat0-17-grp { fsl,pins = < MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79 MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79 @@ -332,14 +332,14 @@ >; }; - pinctrl_lcdif_clken: lcdifctrlgrp1 { + pinctrl_lcdif_clken: lcdifctrl-1-grp { fsl,pins = < MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x17050 MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79 >; }; - pinctrl_lcdif_hvsync: lcdifctrlgrp2 { + pinctrl_lcdif_hvsync: lcdifctrl-2-grp { fsl,pins = < MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79 MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79 @@ -370,7 +370,7 @@ >; }; - pinctrl_sai2_sleep: sai2grp-sleep { + pinctrl_sai2_sleep: sai2-sleep-grp { fsl,pins = < MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15 0x3000 MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x3000 @@ -381,7 +381,7 @@ >; }; - pinctrl_uart2_4wires: uart2grp-4wires { + pinctrl_uart2_4wires: uart2-4wires-grp { fsl,pins = < MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1 MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1 @@ -390,7 +390,7 @@ >; }; - pinctrl_uart3_2wires: uart3grp-2wires { + pinctrl_uart3_2wires: uart3-2wires-grp { fsl,pins = < MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1 MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1 diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsom.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsom.dtsi index 4a03ea6d24dc..9cc3eebb6b05 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsom.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsom.dtsi @@ -232,7 +232,7 @@ >; }; - pinctrl_usdhc1_sleep: usdhc1grp-sleep { + pinctrl_usdhc1_sleep: usdhc1-sleep-grp { fsl,pins = < MX6UL_PAD_SD1_CMD__GPIO2_IO16 0x3000 MX6UL_PAD_SD1_CLK__GPIO2_IO17 0x3000 @@ -250,7 +250,7 @@ >; }; - pinctrl_wifibt_ctrl_sleep: wifibt-ctrl-grp-sleep { + pinctrl_wifibt_ctrl_sleep: wifibt-ctrl-sleep-grp { fsl,pins = < MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x3000 MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x3000 diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts index cdbb8c435cd6..2a6bb5ff808a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts @@ -365,7 +365,7 @@ }; pinctrl_tsc: tscgrp { - fsl,pin = < + fsl,pins = < MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0 MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 @@ -410,7 +410,7 @@ >; }; - pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp { fsl,pins = < MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 @@ -421,7 +421,7 @@ >; }; - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp { fsl,pins = < MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-isiot.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-isiot.dtsi index ee86c36205f9..118df2a457c9 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-isiot.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-isiot.dtsi @@ -346,7 +346,7 @@ >; }; - pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp { fsl,pins = < MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 @@ -357,7 +357,7 @@ >; }; - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp { fsl,pins = < MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi index d8f7877349c9..29d2f86d5e34 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi @@ -351,7 +351,7 @@ >; }; - pinctrl_usbotg1: usbotg1 { + pinctrl_usbotg1: usbotg1grp { fsl,pins = < MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x1b0b0 >; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-liteboard.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-liteboard.dts index 1d863a16bcf0..5e62272acfba 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-liteboard.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-liteboard.dts @@ -100,7 +100,7 @@ >; }; - pinctrl_usb_otg1_vbus: usb-otg1-vbus { + pinctrl_usb_otg1_vbus: usb-otg1-vbus-grp { fsl,pins = < MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x79 >; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-wlbt-05.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-wlbt-05.dtsi index 04477fd4b9a9..4a45fb784ff7 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-wlbt-05.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-wlbt-05.dtsi @@ -31,7 +31,7 @@ >; }; - pinctrl_uart2_bt: uart2grp-bt { + pinctrl_uart2_bt: uart2-bt-grp { fsl,pins = < MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x17059 MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x17059 @@ -40,7 +40,7 @@ >; }; - pinctrl_usdhc2_wl: usdhc2grp-wl { + pinctrl_usdhc2_wl: usdhc2-wl-grp { fsl,pins = < MX6UL_PAD_LCD_DATA18__USDHC2_CMD 0x10051 MX6UL_PAD_LCD_DATA19__USDHC2_CLK 0x10061 diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin.dtsi index 38ea4dcfa228..bef5eb38a90d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin.dtsi @@ -219,7 +219,7 @@ >; }; - pinctrl_flexcan1: flexcan1 { + pinctrl_flexcan1: flexcan1grp { fsl,pins = < MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0 MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0 @@ -275,7 +275,7 @@ >; }; - pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp { fsl,pins = < MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 @@ -286,7 +286,7 @@ >; }; - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp { fsl,pins = < MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul-common.dtsi index 57e647fc3237..c9c0794f01a2 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul-common.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul-common.dtsi @@ -202,7 +202,7 @@ >; }; - pinctrl_pmic: pmic { + pinctrl_pmic: pmicgrp { fsl,pins = < /* PMIC irq */ MX6UL_PAD_CSI_DATA03__GPIO4_IO24 0x1b099 diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-mainboard.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-mainboard.dts index ef76ece21010..20c810a81403 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-mainboard.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-mainboard.dts @@ -198,7 +198,7 @@ >; }; - pinctrl_disp0_3: disp0grp-3 { + pinctrl_disp0_3: disp0-3-grp { fsl,pins = < MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x10 /* LSCLK */ MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x10 /* OE_ACD */ diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi index 864173e30709..278120404d31 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi @@ -578,19 +578,13 @@ }; &iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - pinctrl_hog: hoggrp { - }; - pinctrl_led: ledgrp { fsl,pins = < MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x0b0b0 /* LED */ >; }; - pinctrl_disp0_1: disp0grp-1 { + pinctrl_disp0_1: disp0-1-grp { fsl,pins = < MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x10 /* LSCLK */ MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x10 /* OE_ACD */ @@ -623,7 +617,7 @@ >; }; - pinctrl_disp0_2: disp0grp-2 { + pinctrl_disp0_2: disp0-2-grp { fsl,pins = < MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x10 /* LSCLK */ MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x10 /* OE_ACD */ @@ -713,25 +707,25 @@ >; }; - pinctrl_etnphy0_int: etnphy-intgrp-0 { + pinctrl_etnphy0_int: etnphy-int-0-grp { fsl,pins = < MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0b0b0 /* ETN PHY INT */ >; }; - pinctrl_etnphy0_rst: etnphy-rstgrp-0 { + pinctrl_etnphy0_rst: etnphy-rst-0-grp { fsl,pins = < MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x0b0b0 /* ETN PHY RESET */ >; }; - pinctrl_etnphy1_int: etnphy-intgrp-1 { + pinctrl_etnphy1_int: etnphy-int-1-grp { fsl,pins = < MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0x0b0b0 /* ETN PHY INT */ >; }; - pinctrl_etnphy1_rst: etnphy-rstgrp-1 { + pinctrl_etnphy1_rst: etnphy-rst-1-grp { fsl,pins = < MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x0b0b0 /* ETN PHY RESET */ >; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-myir-mys-6ulx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-myir-mys-6ulx.dtsi index d03694feaf5c..83b9de17cee2 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ull-myir-mys-6ulx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-myir-mys-6ulx.dtsi @@ -169,7 +169,7 @@ >; }; - pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp { fsl,pins = < MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 @@ -180,7 +180,7 @@ >; }; - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp { fsl,pins = < MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 @@ -206,7 +206,7 @@ >; }; - pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp { fsl,pins = < MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100b9 MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170b9 @@ -221,7 +221,7 @@ >; }; - pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp { fsl,pins = < MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9 MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board.dtsi index 6bb12e0bbc7e..28fddbcdc55e 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board.dtsi @@ -323,7 +323,7 @@ >; }; - pinctrl_reg_vmmc: usdhc1regvmmc { + pinctrl_reg_vmmc: usdhc1regvmmc-grp { fsl,pins = < MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x17059 >; @@ -339,14 +339,14 @@ }; pinctrl_uart1: uart1grp { - fsl,pin = < + fsl,pins = < MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 >; }; pinctrl_uart2: uart2grp { - fsl,pin = < + fsl,pins = < MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1 MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1 MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS 0x1b0b1 @@ -355,7 +355,7 @@ }; pinctrl_uart3: uart3grp { - fsl,pin = < + fsl,pins = < MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1 MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1 MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x1b0b1 @@ -364,21 +364,21 @@ }; pinctrl_uart4: uart4grp { - fsl,pin = < + fsl,pins = < MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x1b0b1 MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x1b0b1 >; }; pinctrl_uart5: uart5grp { - fsl,pin = < + fsl,pins = < MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1 MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1 >; }; pinctrl_usb_otg1_id: usbotg1idgrp { - fsl,pin = < + fsl,pins = < MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059 >; }; @@ -394,7 +394,7 @@ >; }; - pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp { fsl,pins = < MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 @@ -405,7 +405,7 @@ >; }; - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp { fsl,pins = < MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 @@ -416,7 +416,7 @@ >; }; - pinctrl_usdhc1_cd: usdhc1cd { + pinctrl_usdhc1_cd: usdhc1cd-grp { fsl,pins = < MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 >; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi.dtsi index f5ad6b5c1ad0..278152875f8e 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi.dtsi @@ -102,7 +102,7 @@ >; }; - pinctrl_reg_vqmmc: usdhc1regvqmmc { + pinctrl_reg_vqmmc: usdhc1regvqmmcgrp { fsl,pins = < MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x17059 >; @@ -123,7 +123,7 @@ >; }; - pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp { fsl,pins = < MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100b9 MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170b9 @@ -138,7 +138,7 @@ >; }; - pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp { fsl,pins = < MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9 MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9 diff --git a/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts b/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts index c92e4e2f6ab9..6159ed70d966 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts @@ -94,7 +94,7 @@ }; &iomuxc { - pinctrl_gpmi_nand: gpmi-nand { + pinctrl_gpmi_nand: gpminandgrp { fsl,pins = < MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1 MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1 diff --git a/arch/arm/boot/dts/nxp/imx/imx7-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-colibri.dtsi index 9fe51884af79..62e41edcaf1d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7-colibri.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx7-colibri.dtsi @@ -903,7 +903,7 @@ >; }; - pinctrl_lvds_transceiver: lvdstx { + pinctrl_lvds_transceiver: lvdstxgrp { fsl,pins = < MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2 0x14 /* SODIMM 63 */ MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3 0x74 /* SODIMM 55 */ diff --git a/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi index 52869e68f833..e1c401f468e1 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi @@ -81,6 +81,12 @@ }; }; + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>, + <&adc2 0>, <&adc2 1>, <&adc2 2>, <&adc2 3>; + }; + reg_sd1_vmmc: regulator-sd1-vmmc { compatible = "regulator-fixed"; regulator-name = "VCC3V3_SD1"; @@ -310,7 +316,7 @@ &i2c1 { lm75: temperature-sensor@49 { - compatible = "national,lm75"; + compatible = "national,lm75a"; reg = <0x49>; vs-supply = <®_vcc_3v3>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts b/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts index 9c6476bda4a0..7ee66be8bccb 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts @@ -419,7 +419,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog_1 &pinctrl_j2>; - pinctrl_hog_1: hoggrp-1 { + pinctrl_hog_1: hoggrp { fsl,pins = < MX7D_PAD_SD3_RESET_B__GPIO6_IO11 0x5d MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x7d @@ -665,7 +665,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog_2>; - pinctrl_hog_2: hoggrp-2 { + pinctrl_hog_2: hoggrp { fsl,pins = < MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x7d MX7D_PAD_LPSR_GPIO1_IO03__CCM_CLKO2 0x7d diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi b/arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi index 8d5037ac03c7..a1574ccec89c 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi @@ -444,14 +444,14 @@ >; }; - pinctrl_can1: can1frp { + pinctrl_can1: can1frpgrp { fsl,pins = < MX7D_PAD_SAI1_RX_DATA__FLEXCAN1_RX 0x59 MX7D_PAD_SAI1_TX_BCLK__FLEXCAN1_TX 0x59 >; }; - pinctrl_can2: can2frp { + pinctrl_can2: can2frpgrp { fsl,pins = < MX7D_PAD_SAI1_TX_SYNC__FLEXCAN2_RX 0x59 MX7D_PAD_SAI1_TX_DATA__FLEXCAN2_TX 0x59 @@ -499,19 +499,19 @@ >; }; - pinctrl_pwm1: pwm1 { + pinctrl_pwm1: pwm1grp { fsl,pins = < MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x7f >; }; - pinctrl_pwm2: pwm2 { + pinctrl_pwm2: pwm2grp { fsl,pins = < MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x7f >; }; - pinctrl_pwm3: pwm3 { + pinctrl_pwm3: pwm3grp { fsl,pins = < MX7D_PAD_GPIO1_IO10__PWM3_OUT 0x7f >; @@ -563,7 +563,7 @@ >; }; - pinctrl_usbotg1_pwr: usbotg_pwr { + pinctrl_usbotg1_pwr: usbotgpwrgrp { fsl,pins = < MX7D_PAD_UART3_TX_DATA__GPIO4_IO5 0x14 >; @@ -581,7 +581,7 @@ >; }; - pinctrl_usdhc1_100mhz: usdhc1grp_100mhz { + pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp { fsl,pins = < MX7D_PAD_SD1_CMD__SD1_CMD 0x5a MX7D_PAD_SD1_CLK__SD1_CLK 0x1a @@ -593,7 +593,7 @@ >; }; - pinctrl_usdhc1_200mhz: usdhc1grp_200mhz { + pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp { fsl,pins = < MX7D_PAD_SD1_CMD__SD1_CMD 0x5b MX7D_PAD_SD1_CLK__SD1_CLK 0x1b @@ -631,7 +631,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { fsl,pins = < MX7D_PAD_SD3_CMD__SD3_CMD 0x5a MX7D_PAD_SD3_CLK__SD3_CLK 0x1a @@ -646,7 +646,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { fsl,pins = < MX7D_PAD_SD3_CMD__SD3_CMD 0x5b MX7D_PAD_SD3_CLK__SD3_CLK 0x1b diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-remarkable2.dts b/arch/arm/boot/dts/nxp/imx/imx7d-remarkable2.dts index 92cb45dacda6..eec526a96311 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-remarkable2.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7d-remarkable2.dts @@ -508,7 +508,7 @@ >; }; - pinctrl_usdhc2_100mhz: usdhc2grp_100mhz { + pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp { fsl,pins = < MX7D_PAD_SD2_CMD__SD2_CMD 0x5a MX7D_PAD_SD2_CLK__SD2_CLK 0x1a @@ -519,7 +519,7 @@ >; }; - pinctrl_usdhc2_200mhz: usdhc2grp_200mhz { + pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp { fsl,pins = < MX7D_PAD_SD2_CMD__SD2_CMD 0x5b MX7D_PAD_SD2_CLK__SD2_CLK 0x1b @@ -546,7 +546,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { fsl,pins = < MX7D_PAD_SD3_CMD__SD3_CMD 0x5a MX7D_PAD_SD3_CLK__SD3_CLK 0x1a @@ -562,7 +562,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { fsl,pins = < MX7D_PAD_SD3_CMD__SD3_CMD 0x5b MX7D_PAD_SD3_CLK__SD3_CLK 0x1b diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-sdb-reva.dts b/arch/arm/boot/dts/nxp/imx/imx7d-sdb-reva.dts index cabdaa6dc518..40156cd9195f 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-sdb-reva.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7d-sdb-reva.dts @@ -21,23 +21,21 @@ }; &iomuxc { - imx7d-sdb { - pinctrl_tsc2046_pendown: tsc2046_pendown { - fsl,pins = < - MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x59 - >; - }; - - pinctrl_hog: hoggrp { - fsl,pins = < - MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x34 /* bt reg on */ - >; - }; - - pinctrl_usb_otg2_vbus_reg_reva: usbotg2vbusregrevagrp { - fsl,pins = < - MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 - >; - }; + pinctrl_tsc2046_pendown: tsc2046-pendowngrp { + fsl,pins = < + MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x59 + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x34 /* bt reg on */ + >; + }; + + pinctrl_usb_otg2_vbus_reg_reva: usbotg2vbusregrevagrp { + fsl,pins = < + MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts b/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts index 0462e43ec09b..f712537fca16 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts @@ -537,342 +537,340 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; - imx7d-sdb { - pinctrl_brcm_reg: brcmreggrp { - fsl,pins = < - MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x14 - >; - }; + pinctrl_brcm_reg: brcmreggrp { + fsl,pins = < + MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x14 + >; + }; - pinctrl_ecspi3: ecspi3grp { - fsl,pins = < - MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO 0x2 - MX7D_PAD_SAI2_TX_BCLK__ECSPI3_MOSI 0x2 - MX7D_PAD_SAI2_RX_DATA__ECSPI3_SCLK 0x2 - MX7D_PAD_SD2_CD_B__GPIO5_IO9 0x59 - >; - }; + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO 0x2 + MX7D_PAD_SAI2_TX_BCLK__ECSPI3_MOSI 0x2 + MX7D_PAD_SAI2_RX_DATA__ECSPI3_SCLK 0x2 + MX7D_PAD_SD2_CD_B__GPIO5_IO9 0x59 + >; + }; - pinctrl_enet1: enet1grp { - fsl,pins = < - MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x3 - MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x3 - MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1 - MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1 - MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1 - MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1 - MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1 - MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1 - MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1 - MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1 - MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1 - MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1 - MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1 - MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1 - >; - }; + pinctrl_enet1: enet1grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x3 + MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x3 + MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1 + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1 + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1 + MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1 + MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1 + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1 + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1 + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1 + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1 + MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1 + MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1 + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1 + >; + }; - pinctrl_enet2: enet2grp { - fsl,pins = < - MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x1 - MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x1 - MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x1 - MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x1 - MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x1 - MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x1 - MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x1 - MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x1 - MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x1 - MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x1 - MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x1 - MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x1 - >; - }; + pinctrl_enet2: enet2grp { + fsl,pins = < + MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x1 + MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x1 + MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x1 + MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x1 + MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x1 + MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x1 + MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x1 + MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x1 + MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x1 + MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x1 + MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x1 + MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x1 + >; + }; - pinctrl_enet2_reg: enet2reggrp { - fsl,pins = < - MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4 0x14 - >; - }; + pinctrl_enet2_reg: enet2reggrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4 0x14 + >; + }; - pinctrl_flexcan2: flexcan2grp { - fsl,pins = < - MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x59 - MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x59 - >; - }; + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x59 + MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x59 + >; + }; - pinctrl_flexcan2_reg: flexcan2reggrp { - fsl,pins = < - MX7D_PAD_EPDC_DATA14__GPIO2_IO14 0x59 /* CAN_STBY */ - >; - }; + pinctrl_flexcan2_reg: flexcan2reggrp { + fsl,pins = < + MX7D_PAD_EPDC_DATA14__GPIO2_IO14 0x59 /* CAN_STBY */ + >; + }; - pinctrl_gpio_keys: gpio_keysgrp { - fsl,pins = < - MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x59 - MX7D_PAD_SD2_WP__GPIO5_IO10 0x59 - >; - }; + pinctrl_gpio_keys: gpio-keysgrp { + fsl,pins = < + MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x59 + MX7D_PAD_SD2_WP__GPIO5_IO10 0x59 + >; + }; - pinctrl_hog: hoggrp { - fsl,pins = < - MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x34 /* bt reg on */ - MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x59 /* headphone detect */ - >; - }; + pinctrl_hog: hoggrp { + fsl,pins = < + MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x34 /* bt reg on */ + MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x59 /* headphone detect */ + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f - MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f + MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f - MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f + MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f - MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f + MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f + >; + }; - pinctrl_i2c4: i2c4grp { - fsl,pins = < - MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA 0x4000007f - MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL 0x4000007f - >; - }; + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA 0x4000007f + MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL 0x4000007f + >; + }; - pinctrl_lcdif: lcdifgrp { - fsl,pins = < - MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79 - MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79 - MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79 - MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79 - MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79 - MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79 - MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79 - MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79 - MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79 - MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79 - MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79 - MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79 - MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79 - MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79 - MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79 - MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79 - MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79 - MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79 - MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79 - MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79 - MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79 - MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79 - MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79 - MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79 - MX7D_PAD_LCD_CLK__LCD_CLK 0x79 - MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79 - MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79 - MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79 - MX7D_PAD_LCD_RESET__LCD_RESET 0x79 - >; - }; + pinctrl_lcdif: lcdifgrp { + fsl,pins = < + MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79 + MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79 + MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79 + MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79 + MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79 + MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79 + MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79 + MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79 + MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79 + MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79 + MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79 + MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79 + MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79 + MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79 + MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79 + MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79 + MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79 + MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79 + MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79 + MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79 + MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79 + MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79 + MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79 + MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79 + MX7D_PAD_LCD_CLK__LCD_CLK 0x79 + MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79 + MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79 + MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79 + MX7D_PAD_LCD_RESET__LCD_RESET 0x79 + >; + }; - pinctrl_sai1: sai1grp { - fsl,pins = < - MX7D_PAD_SAI1_MCLK__SAI1_MCLK 0x1f - MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f - MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC 0x1f - MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30 - MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f - >; - }; + pinctrl_sai1: sai1grp { + fsl,pins = < + MX7D_PAD_SAI1_MCLK__SAI1_MCLK 0x1f + MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f + MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC 0x1f + MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30 + MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f + >; + }; - pinctrl_sai2: sai2grp { - fsl,pins = < - MX7D_PAD_SAI2_TX_BCLK__SAI2_TX_BCLK 0x1f - MX7D_PAD_SAI2_TX_SYNC__SAI2_TX_SYNC 0x1f - MX7D_PAD_SAI2_TX_DATA__SAI2_TX_DATA0 0x30 - MX7D_PAD_SAI2_RX_DATA__SAI2_RX_DATA0 0x1f - >; - }; + pinctrl_sai2: sai2grp { + fsl,pins = < + MX7D_PAD_SAI2_TX_BCLK__SAI2_TX_BCLK 0x1f + MX7D_PAD_SAI2_TX_SYNC__SAI2_TX_SYNC 0x1f + MX7D_PAD_SAI2_TX_DATA__SAI2_TX_DATA0 0x30 + MX7D_PAD_SAI2_RX_DATA__SAI2_RX_DATA0 0x1f + >; + }; - pinctrl_sai3: sai3grp { - fsl,pins = < - MX7D_PAD_UART3_TX_DATA__SAI3_TX_BCLK 0x1f - MX7D_PAD_UART3_CTS_B__SAI3_TX_SYNC 0x1f - MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0 0x30 - >; - }; + pinctrl_sai3: sai3grp { + fsl,pins = < + MX7D_PAD_UART3_TX_DATA__SAI3_TX_BCLK 0x1f + MX7D_PAD_UART3_CTS_B__SAI3_TX_SYNC 0x1f + MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0 0x30 + >; + }; - pinctrl_spi4: spi4grp { - fsl,pins = < - MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x59 - MX7D_PAD_GPIO1_IO12__GPIO1_IO12 0x59 - MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x59 - >; - }; + pinctrl_spi4: spi4grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x59 + MX7D_PAD_GPIO1_IO12__GPIO1_IO12 0x59 + MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x59 + >; + }; - pinctrl_tsc2046_pendown: tsc2046_pendown { - fsl,pins = < - MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x59 - >; - }; + pinctrl_tsc2046_pendown: tsc2046-pendowngrp { + fsl,pins = < + MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x59 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 - MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 + MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79 + >; + }; - pinctrl_uart5: uart5grp { - fsl,pins = < - MX7D_PAD_SAI1_TX_BCLK__UART5_DCE_TX 0x79 - MX7D_PAD_SAI1_RX_DATA__UART5_DCE_RX 0x79 - MX7D_PAD_SAI1_TX_SYNC__UART5_DCE_CTS 0x79 - MX7D_PAD_SAI1_TX_DATA__UART5_DCE_RTS 0x79 - >; - }; + pinctrl_uart5: uart5grp { + fsl,pins = < + MX7D_PAD_SAI1_TX_BCLK__UART5_DCE_TX 0x79 + MX7D_PAD_SAI1_RX_DATA__UART5_DCE_RX 0x79 + MX7D_PAD_SAI1_TX_SYNC__UART5_DCE_CTS 0x79 + MX7D_PAD_SAI1_TX_DATA__UART5_DCE_RTS 0x79 + >; + }; - pinctrl_uart6: uart6grp { - fsl,pins = < - MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX 0x79 - MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX 0x79 - MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS 0x79 - MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS 0x79 - >; - }; + pinctrl_uart6: uart6grp { + fsl,pins = < + MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX 0x79 + MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX 0x79 + MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS 0x79 + MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS 0x79 + >; + }; - pinctrl_usdhc1_gpio: usdhc1_gpiogrp { - fsl,pins = < - MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 /* CD */ - MX7D_PAD_SD1_WP__GPIO5_IO1 0x59 /* WP */ - MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x59 /* vmmc */ - MX7D_PAD_GPIO1_IO08__SD1_VSELECT 0x59 /* VSELECT */ - >; - }; + pinctrl_usdhc1_gpio: usdhc1-gpiogrp { + fsl,pins = < + MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 /* CD */ + MX7D_PAD_SD1_WP__GPIO5_IO1 0x59 /* WP */ + MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x59 /* vmmc */ + MX7D_PAD_GPIO1_IO08__SD1_VSELECT 0x59 /* VSELECT */ + >; + }; - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX7D_PAD_SD1_CMD__SD1_CMD 0x59 - MX7D_PAD_SD1_CLK__SD1_CLK 0x19 - MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 - MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 - MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 - MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 - >; - }; + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x59 + MX7D_PAD_SD1_CLK__SD1_CLK 0x19 + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 + >; + }; - pinctrl_usdhc1_100mhz: usdhc1grp_100mhz { - fsl,pins = < - MX7D_PAD_SD1_CMD__SD1_CMD 0x5a - MX7D_PAD_SD1_CLK__SD1_CLK 0x1a - MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a - MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a - MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a - MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a - >; - }; + pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x5a + MX7D_PAD_SD1_CLK__SD1_CLK 0x1a + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a + >; + }; - pinctrl_usdhc1_200mhz: usdhc1grp_200mhz { - fsl,pins = < - MX7D_PAD_SD1_CMD__SD1_CMD 0x5b - MX7D_PAD_SD1_CLK__SD1_CLK 0x1b - MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b - MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b - MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b - MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b - >; - }; + pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x5b + MX7D_PAD_SD1_CLK__SD1_CLK 0x1b + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b + >; + }; - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX7D_PAD_SD2_CMD__SD2_CMD 0x59 - MX7D_PAD_SD2_CLK__SD2_CLK 0x19 - MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59 - MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59 - MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59 - MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59 - >; - }; + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX7D_PAD_SD2_CMD__SD2_CMD 0x59 + MX7D_PAD_SD2_CLK__SD2_CLK 0x19 + MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59 + MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59 + MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59 + MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59 + >; + }; - pinctrl_usdhc2_100mhz: usdhc2grp_100mhz { - fsl,pins = < - MX7D_PAD_SD2_CMD__SD2_CMD 0x5a - MX7D_PAD_SD2_CLK__SD2_CLK 0x1a - MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5a - MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5a - MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5a - MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5a - >; - }; + pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp { + fsl,pins = < + MX7D_PAD_SD2_CMD__SD2_CMD 0x5a + MX7D_PAD_SD2_CLK__SD2_CLK 0x1a + MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5a + MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5a + MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5a + MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5a + >; + }; - pinctrl_usdhc2_200mhz: usdhc2grp_200mhz { - fsl,pins = < - MX7D_PAD_SD2_CMD__SD2_CMD 0x5b - MX7D_PAD_SD2_CLK__SD2_CLK 0x1b - MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5b - MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5b - MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5b - MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5b - >; - }; + pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp { + fsl,pins = < + MX7D_PAD_SD2_CMD__SD2_CMD 0x5b + MX7D_PAD_SD2_CLK__SD2_CLK 0x1b + MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5b + MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5b + MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5b + MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5b + >; + }; - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX7D_PAD_SD3_CMD__SD3_CMD 0x59 - MX7D_PAD_SD3_CLK__SD3_CLK 0x19 - MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 - MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 - MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 - MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 - MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59 - MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59 - MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59 - MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59 - MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19 - >; - }; + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x59 + MX7D_PAD_SD3_CLK__SD3_CLK 0x19 + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59 + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59 + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59 + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59 + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19 + >; + }; - pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { - fsl,pins = < - MX7D_PAD_SD3_CMD__SD3_CMD 0x5a - MX7D_PAD_SD3_CLK__SD3_CLK 0x1a - MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a - MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a - MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a - MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a - MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a - MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a - MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a - MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a - MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1a - >; - }; + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5a + MX7D_PAD_SD3_CLK__SD3_CLK 0x1a + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1a + >; + }; - pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { - fsl,pins = < - MX7D_PAD_SD3_CMD__SD3_CMD 0x5b - MX7D_PAD_SD3_CLK__SD3_CLK 0x1b - MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b - MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b - MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b - MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b - MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b - MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b - MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b - MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b - MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1b - >; - }; + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5b + MX7D_PAD_SD3_CLK__SD3_CLK 0x1b + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1b + >; }; }; @@ -901,7 +899,7 @@ >; }; - pinctrl_sai3_mclk: sai3grp_mclk { + pinctrl_sai3_mclk: sai3-mclk-grp { fsl,pins = < MX7D_PAD_LPSR_GPIO1_IO03__SAI3_MCLK 0x1f >; diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-zii-rmu2.dts b/arch/arm/boot/dts/nxp/imx/imx7d-zii-rmu2.dts index 521493342fe9..8f5566027c25 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-zii-rmu2.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7d-zii-rmu2.dts @@ -350,7 +350,7 @@ &iomuxc_lpsr { pinctrl_enet1_phy_interrupt: enet1phyinterruptgrp { - fsl,phy = < + fsl,pins = < MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x08 >; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts b/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts index 7bab113ca6da..af4acc311572 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts @@ -459,7 +459,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { fsl,pins = < MX7D_PAD_SD3_CMD__SD3_CMD 0x5a MX7D_PAD_SD3_CLK__SD3_CLK 0x1a @@ -475,7 +475,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { fsl,pins = < MX7D_PAD_SD3_CMD__SD3_CMD 0x5b MX7D_PAD_SD3_CLK__SD3_CLK 0x1b diff --git a/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi b/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi index e78d0a7d8cd2..941d9860218e 100644 --- a/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi @@ -505,7 +505,7 @@ >; }; - pinctrl_uart6dte: uart6dte { + pinctrl_uart6dte: uart6dtegrp { fsl,pins = < MX6UL_PAD_CSI_PIXCLK__UART6_DTE_TX 0x1b0b1 MX6UL_PAD_CSI_MCLK__UART6_DTE_RX 0x1b0b1 @@ -537,7 +537,7 @@ >; }; - pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp { fsl,pins = < MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x00017069 MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x000170b9 @@ -552,7 +552,7 @@ >; }; - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp { fsl,pins = < MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x00017069 MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x000170f9 diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts index 224f80a4a31d..4aefbc01dfc0 100644 --- a/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts +++ b/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts @@ -482,8 +482,8 @@ reg = <0x1d>; }; - lm75@48 { - compatible = "nxp,lm75"; + temperature-sensor@48 { + compatible = "national,lm75b"; reg = <0x48>; }; diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts b/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts index 1f84654df50c..846afb8ccbf1 100644 --- a/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts +++ b/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts @@ -511,7 +511,7 @@ clock-frequency = <400000>; sensor@49 { - compatible = "lm75"; + compatible = "national,lm75"; reg = <0x49>; }; diff --git a/arch/arm/boot/dts/nxp/mxs/imx23-evk.dts b/arch/arm/boot/dts/nxp/mxs/imx23-evk.dts index 7365fe4581a3..33b36af1656f 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx23-evk.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx23-evk.dts @@ -52,7 +52,7 @@ }; apb@80000000 { - apbh@80000000 { + apbh-bus@80000000 { nand-controller@8000c000 { pinctrl-names = "default"; pinctrl-0 = <&gpmi_pins_a &gpmi_pins_fixup>; @@ -99,7 +99,7 @@ }; }; - apbx@80040000 { + apbx-bus@80040000 { lradc@80050000 { status = "okay"; fsl,lradc-touchscreen-wires = <4>; diff --git a/arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dts b/arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dts index 229e727b222e..e372e9327a47 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dts @@ -19,7 +19,7 @@ }; apb@80000000 { - apbh@80000000 { + apbh-bus@80000000 { ssp0: spi@80010000 { compatible = "fsl,imx23-mmc"; pinctrl-names = "default"; @@ -64,7 +64,7 @@ }; }; - apbx@80040000 { + apbx-bus@80040000 { lradc@80050000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts b/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts index b23e7ada9c80..cb661bf2d157 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts @@ -55,7 +55,7 @@ }; apb@80000000 { - apbh@80000000 { + apbh-bus@80000000 { ssp0: spi@80010000 { compatible = "fsl,imx23-mmc"; pinctrl-names = "default"; @@ -100,7 +100,7 @@ }; }; - apbx@80040000 { + apbx-bus@80040000 { pwm: pwm@80064000 { pinctrl-names = "default"; pinctrl-0 = <&pwm2_pins_a>; diff --git a/arch/arm/boot/dts/nxp/mxs/imx23-stmp378x_devb.dts b/arch/arm/boot/dts/nxp/mxs/imx23-stmp378x_devb.dts index 69124ba6a666..b2b6f8514999 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx23-stmp378x_devb.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx23-stmp378x_devb.dts @@ -16,7 +16,7 @@ }; apb@80000000 { - apbh@80000000 { + apbh-bus@80000000 { ssp0: spi@80010000 { compatible = "fsl,imx23-mmc"; pinctrl-names = "default"; @@ -44,7 +44,7 @@ }; }; - apbx@80040000 { + apbx-bus@80040000 { auart0: serial@8006c000 { pinctrl-names = "default"; pinctrl-0 = <&auart0_pins_a>; diff --git a/arch/arm/boot/dts/nxp/mxs/imx23-xfi3.dts b/arch/arm/boot/dts/nxp/mxs/imx23-xfi3.dts index 28341d8315c2..0b088c8ab6b6 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx23-xfi3.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx23-xfi3.dts @@ -54,7 +54,7 @@ }; apb@80000000 { - apbh@80000000 { + apbh-bus@80000000 { ssp0: spi@80010000 { compatible = "fsl,imx23-mmc"; pinctrl-names = "default"; @@ -101,7 +101,7 @@ }; }; - apbx@80040000 { + apbx-bus@80040000 { i2c: i2c@80058000 { pinctrl-names = "default"; pinctrl-0 = <&i2c_pins_a>; diff --git a/arch/arm/boot/dts/nxp/mxs/imx23.dtsi b/arch/arm/boot/dts/nxp/mxs/imx23.dtsi index 0309592af1e1..5e21252fb7c9 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx23.dtsi +++ b/arch/arm/boot/dts/nxp/mxs/imx23.dtsi @@ -45,7 +45,7 @@ reg = <0x80000000 0x80000>; ranges; - apbh@80000000 { + apbh-bus@80000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -476,7 +476,7 @@ }; }; - apbx@80040000 { + apbx-bus@80040000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-apx4devkit.dts b/arch/arm/boot/dts/nxp/mxs/imx28-apx4devkit.dts index f9bf40d96568..4c4ea91c286f 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28-apx4devkit.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx28-apx4devkit.dts @@ -11,19 +11,13 @@ reg = <0x40000000 0x04000000>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_3p3v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; }; sound { diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10037.dts b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10037.dts index c72fe2d392f1..fd177daa6385 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10037.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10037.dts @@ -14,7 +14,7 @@ compatible = "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28"; apb@80000000 { - apbh@80000000 { + apbh-bus@80000000 { pinctrl@80018000 { usb_pins_cfa10037: usb-10037@0 { reg = <0>; @@ -38,7 +38,7 @@ }; }; - apbx@80040000 { + apbx-bus@80040000 { usbphy1: usbphy@8007e000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi index 69fcb0dde940..410dfe17f8ca 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi +++ b/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi @@ -55,23 +55,6 @@ status = "okay"; }; -&saif0 { - pinctrl-names = "default"; - pinctrl-0 = <&saif0_pins_a>; - #sound-dai-cells = <0>; - assigned-clocks = <&clks 53>; - assigned-clock-rates = <12000000>; - status = "okay"; -}; - -&saif1 { - pinctrl-names = "default"; - pinctrl-0 = <&saif1_pins_a>; - fsl,saif-master = <&saif0>; - #sound-dai-cells = <0>; - status = "okay"; -}; - &spi3_pins_a { fsl,pinmux-ids = < MX28_PAD_AUART2_RX__SSP3_D4 @@ -109,7 +92,7 @@ flash@0 { compatible = "jedec,spi-nor"; - spi-max-frequency = <40000000>; + spi-max-frequency = <20000000>; reg = <0>; partitions { @@ -133,14 +116,21 @@ reg = <0x90000 0x10000>; }; - partition@100000 { - label = "kernel"; - reg = <0x100000 0x400000>; + partition@a0000 { + label = "rescue"; + reg = <0xa0000 0xf40000>; + }; + + partition@fe0000 { + /* 1st sector for SPL boot img source data */ + label = "spl-boot-data1"; + reg = <0xfe0000 0x10000>; }; - partition@500000 { - label = "swupdate"; - reg = <0x500000 0x800000>; + partition@ff0000 { + /* 2nd sector for SPL boot img source data */ + label = "spl-boot-data2"; + reg = <0xff0000 0x10000>; }; }; }; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts b/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts index d38183edf0fd..9290635352f1 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts @@ -615,13 +615,13 @@ &saif0 { pinctrl-names = "default"; pinctrl-0 = <&saif0_pins_b>; - fsl,saif-master; status = "okay"; }; &saif1 { pinctrl-names = "default"; pinctrl-0 = <&saif1_pins_a>; + fsl,saif-master = <&saif0>; status = "okay"; }; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi index 4817fba2d938..bbea8b77386f 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi +++ b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi @@ -56,7 +56,7 @@ reg = <0x80000000 0x80000>; ranges; - apbh@80000000 { + apbh-bus@80000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -1092,7 +1092,7 @@ }; }; - apbx@80040000 { + apbx-bus@80040000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/qcom/pma8084.dtsi b/arch/arm/boot/dts/qcom/pma8084.dtsi index 2985f4805b93..309f5256754b 100644 --- a/arch/arm/boot/dts/qcom/pma8084.dtsi +++ b/arch/arm/boot/dts/qcom/pma8084.dtsi @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> @@ -19,12 +20,17 @@ interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; - pwrkey@800 { - compatible = "qcom,pm8941-pwrkey"; + pon@800 { + compatible = "qcom,pm8941-pon"; reg = <0x800>; - interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; }; pma8084_gpios: gpio@c000 { diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts index d460743fbb94..947183992850 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts @@ -125,8 +125,6 @@ &gsbi1_i2c { status = "okay"; clock-frequency = <200000>; - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; eeprom@52 { compatible = "atmel,24c128"; @@ -148,8 +146,6 @@ &gsbi3_i2c { clock-frequency = <200000>; - pinctrl-0 = <&i2c3_pins>; - pinctrl-names = "default"; status = "okay"; trackpad@10 { diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts index 671d58cc2741..178c55c1efeb 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts @@ -188,24 +188,17 @@ }; &tlmm_pinmux { - card_detect: card_detect { - mux { - pins = "gpio26"; - function = "gpio"; - bias-disable; - }; + card_detect: card-detect-state { + pins = "gpio26"; + function = "gpio"; + bias-disable; }; - pcie_pins: pcie_pinmux { - mux { - pins = "gpio27"; - function = "gpio"; - }; - conf { - pins = "gpio27"; - drive-strength = <12>; - bias-disable; - }; + pcie_pins: pcie-state { + pins = "gpio27"; + function = "gpio"; + drive-strength = <12>; + bias-disable; }; }; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts index ed86b24119c9..b3ff8010b149 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts @@ -321,24 +321,17 @@ }; &tlmm_pinmux { - card_detect: card_detect { - mux { - pins = "gpio26"; - function = "gpio"; - bias-disable; - }; + card_detect: card-detect-state { + pins = "gpio26"; + function = "gpio"; + bias-disable; }; - pcie_pins: pcie_pinmux { - mux { - pins = "gpio27"; - function = "gpio"; - }; - conf { - pins = "gpio27"; - drive-strength = <12>; - bias-disable; - }; + pcie_pins: pcie-state { + pins = "gpio27"; + function = "gpio"; + drive-strength = <12>; + bias-disable; }; }; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi index 7c545c50847b..e53de709e9d1 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi @@ -1,318 +1,218 @@ // SPDX-License-Identifier: GPL-2.0 &tlmm_pinmux { - sdc4_gpios: sdc4-gpios { - pios { - pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68"; - function = "sdc4"; - }; - }; - - sdcc1_pins: sdcc1-pin-active { - clk { + sdcc1_default_state: sdcc1-default-state { + clk-pins { pins = "sdc1_clk"; - drive-strengh = <16>; + drive-strength = <16>; bias-disable; }; - cmd { + cmd-pins { pins = "sdc1_cmd"; - drive-strengh = <10>; + drive-strength = <10>; bias-pull-up; }; - data { + data-pins { pins = "sdc1_data"; - drive-strengh = <10>; + drive-strength = <10>; bias-pull-up; }; }; - sdcc3_pins: sdcc3-pin-active { - clk { + sdcc3_default_state: sdcc3-default-state { + clk-pins { pins = "sdc3_clk"; - drive-strengh = <8>; + drive-strength = <8>; bias-disable; }; - cmd { + cmd-pins { pins = "sdc3_cmd"; - drive-strengh = <8>; + drive-strength = <8>; bias-pull-up; }; - data { + data-pins { pins = "sdc3_data"; - drive-strengh = <8>; + drive-strength = <8>; bias-pull-up; }; }; - ps_hold: ps_hold { - mux { - pins = "gpio78"; - function = "ps_hold"; - }; + sdc4_default_state: sdc4-default-state { + pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68"; + function = "sdc4"; }; - i2c1_pins: i2c1 { - mux { - pins = "gpio20", "gpio21"; - function = "gsbi1"; - }; + gsbi1_uart_2pins: gsbi1-uart-2pins-state { + pins = "gpio18", "gpio19"; + function = "gsbi1"; + }; - pinconf { - pins = "gpio20", "gpio21"; - drive-strength = <16>; - bias-disable; - }; + gsbi1_uart_4pins: gsbi1-uart-4pins-state { + pins = "gpio18", "gpio19", "gpio20", "gpio21"; + function = "gsbi1"; }; - i2c1_pins_sleep: i2c1_pins_sleep { - mux { - pins = "gpio20", "gpio21"; - function = "gpio"; - }; - pinconf { - pins = "gpio20", "gpio21"; + gsbi4_uart_pin_a: gsbi4-uart-pin-active-state { + rx-pins { + pins = "gpio11"; + function = "gsbi4"; drive-strength = <2>; bias-disable; }; - }; - gsbi1_uart_2pins: gsbi1_uart_2pins { - mux { - pins = "gpio18", "gpio19"; - function = "gsbi1"; + tx-pins { + pins = "gpio10"; + function = "gsbi4"; + drive-strength = <4>; + bias-disable; }; }; - gsbi1_uart_4pins: gsbi1_uart_4pins { - mux { - pins = "gpio18", "gpio19", "gpio20", "gpio21"; - function = "gsbi1"; - }; + gsbi6_uart_2pins: gsbi6-uart-2pins-state { + pins = "gpio14", "gpio15"; + function = "gsbi6"; }; - i2c2_pins: i2c2 { - mux { - pins = "gpio24", "gpio25"; - function = "gsbi2"; - }; - - pinconf { - pins = "gpio24", "gpio25"; - drive-strength = <16>; - bias-disable; - }; + gsbi6_uart_4pins: gsbi6-uart-4pins-state { + pins = "gpio14", "gpio15", "gpio16", "gpio17"; + function = "gsbi6"; }; - i2c2_pins_sleep: i2c2_pins_sleep { - mux { - pins = "gpio24", "gpio25"; - function = "gpio"; - }; - - pinconf { - pins = "gpio24", "gpio25"; - drive-strength = <2>; - bias-disable; - }; + gsbi7_uart_2pins: gsbi7-uart-2pins-state { + pins = "gpio82", "gpio83"; + function = "gsbi7"; }; - i2c3_pins: i2c3 { - mux { - pins = "gpio8", "gpio9"; - function = "gsbi3"; - }; - - pinconf { - pins = "gpio8", "gpio9"; - drive-strength = <16>; - bias-disable; - }; + gsbi7_uart_4pins: gsbi7_uart_4pins-state { + pins = "gpio82", "gpio83", "gpio84", "gpio85"; + function = "gsbi7"; }; - i2c3_pins_sleep: i2c3_pins_sleep { - mux { - pins = "gpio8", "gpio9"; - function = "gpio"; - }; - pinconf { - pins = "gpio8", "gpio9"; - drive-strength = <2>; - bias-disable; - }; + i2c1_default_state: i2c1-default-state { + pins = "gpio20", "gpio21"; + function = "gsbi1"; + drive-strength = <16>; + bias-disable; }; - i2c4_pins: i2c4 { - mux { - pins = "gpio12", "gpio13"; - function = "gsbi4"; - }; - - pinconf { - pins = "gpio12", "gpio13"; - drive-strength = <16>; - bias-disable; - }; + i2c1_sleep_state: i2c1-sleep-state { + pins = "gpio20", "gpio21"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - i2c4_pins_sleep: i2c4_pins_sleep { - mux { - pins = "gpio12", "gpio13"; - function = "gpio"; - }; - pinconf { - pins = "gpio12", "gpio13"; - drive-strength = <2>; - bias-disable; - }; + i2c2_default_state: i2c2-default-state { + pins = "gpio24", "gpio25"; + function = "gsbi2"; + drive-strength = <16>; + bias-disable; }; - spi5_default: spi5_default { - pinmux { - pins = "gpio51", "gpio52", "gpio54"; - function = "gsbi5"; - }; - - pinmux_cs { - function = "gpio"; - pins = "gpio53"; - }; - - pinconf { - pins = "gpio51", "gpio52", "gpio54"; - drive-strength = <16>; - bias-disable; - }; - - pinconf_cs { - pins = "gpio53"; - drive-strength = <16>; - bias-disable; - output-high; - }; + i2c2_sleep_state: i2c2-sleep-state { + pins = "gpio24", "gpio25"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - spi5_sleep: spi5_sleep { - pinmux { - function = "gpio"; - pins = "gpio51", "gpio52", "gpio53", "gpio54"; - }; - - pinconf { - pins = "gpio51", "gpio52", "gpio53", "gpio54"; - drive-strength = <2>; - bias-pull-down; - }; + i2c3_default_state: i2c3-default-state { + pins = "gpio8", "gpio9"; + function = "gsbi3"; + drive-strength = <16>; + bias-disable; }; - i2c6_pins: i2c6 { - mux { - pins = "gpio16", "gpio17"; - function = "gsbi6"; - }; - - pinconf { - pins = "gpio16", "gpio17"; - drive-strength = <16>; - bias-disable; - }; + i2c3_sleep_state: i2c3-sleep-state { + pins = "gpio8", "gpio9"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - i2c6_pins_sleep: i2c6_pins_sleep { - mux { - pins = "gpio16", "gpio17"; - function = "gpio"; - }; - pinconf { - pins = "gpio16", "gpio17"; - drive-strength = <2>; - bias-disable; - }; + i2c4_default_state: i2c4-default-state { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + drive-strength = <16>; + bias-disable; }; - gsbi4_uart_pin_a: gsbi4-uart-pin-active-state { - rx-pins { - pins = "gpio11"; - function = "gsbi4"; - drive-strength = <2>; - bias-disable; - }; - - tx-pins { - pins = "gpio10"; - function = "gsbi4"; - drive-strength = <4>; - bias-disable; - }; + i2c4_sleep_state: i2c4-sleep-state { + pins = "gpio12", "gpio13"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - gsbi6_uart_2pins: gsbi6_uart_2pins { - mux { - pins = "gpio14", "gpio15"; - function = "gsbi6"; - }; + i2c6_default_state: i2c6-default-state { + pins = "gpio16", "gpio17"; + function = "gsbi6"; + drive-strength = <16>; + bias-disable; }; - gsbi6_uart_4pins: gsbi6_uart_4pins { - mux { - pins = "gpio14", "gpio15", "gpio16", "gpio17"; - function = "gsbi6"; - }; + i2c6_sleep_state: i2c6-sleep-state { + pins = "gpio16", "gpio17"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - gsbi7_uart_2pins: gsbi7_uart_2pins { - mux { - pins = "gpio82", "gpio83"; - function = "gsbi7"; - }; + i2c7_default_state: i2c7-default-state { + pins = "gpio84", "gpio85"; + function = "gsbi7"; + drive-strength = <16>; + bias-disable; }; - gsbi7_uart_4pins: gsbi7_uart_4pins { - mux { - pins = "gpio82", "gpio83", "gpio84", "gpio85"; - function = "gsbi7"; - }; + i2c7_sleep_state: i2c7-sleep-state { + pins = "gpio84", "gpio85"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; - i2c7_pins: i2c7 { - mux { - pins = "gpio84", "gpio85"; - function = "gsbi7"; + spi5_default_state: spi5-default-state { + spi5-pins { + pins = "gpio51", "gpio52", "gpio54"; + function = "gsbi5"; + drive-strength = <16>; + bias-disable; }; - pinconf { - pins = "gpio84", "gpio85"; + spi5-cs-pins { + pins = "gpio53"; + function = "gpio"; drive-strength = <16>; bias-disable; + output-high; }; }; - i2c7_pins_sleep: i2c7_pins_sleep { - mux { - pins = "gpio84", "gpio85"; + spi5_sleep_state: spi5-sleep-state { + spi5-pins { + pins = "gpio51", "gpio52", "gpio53", "gpio54"; function = "gpio"; - }; - pinconf { - pins = "gpio84", "gpio85"; drive-strength = <2>; - bias-disable; + bias-pull-down; }; }; - riva_fm_pin_a: riva-fm-active { + riva_fm_pin_a: riva-fm-active-state { pins = "gpio14", "gpio15"; function = "riva_fm"; }; - riva_bt_pin_a: riva-bt-active { + riva_bt_pin_a: riva-bt-active-state { pins = "gpio16", "gpio17"; function = "riva_bt"; }; - riva_wlan_pin_a: riva-wlan-active { + riva_wlan_pin_a: riva-wlan-active-state { pins = "gpio64", "gpio65", "gpio66", "gpio67", "gpio68"; function = "riva_wlan"; @@ -320,22 +220,24 @@ bias-pull-down; }; - hdmi_pinctrl: hdmi-pinctrl { - mux { - pins = "gpio70", "gpio71", "gpio72"; - function = "hdmi"; - }; - - pinconf_ddc { + hdmi_pinctrl: hdmi-pinctrl-state { + ddc-pins { pins = "gpio70", "gpio71"; + function = "hdmi"; bias-pull-up; drive-strength = <2>; }; - pinconf_hpd { + hpd-pins { pins = "gpio72"; + function = "hdmi"; bias-pull-down; drive-strength = <16>; }; }; + + ps_hold_default_state: ps-hold-default-state { + pins = "gpio78"; + function = "ps_hold"; + }; }; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts index 2412aa3e3e8d..7752f07973f9 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts @@ -373,21 +373,21 @@ cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; - pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>; + pinctrl-0 = <&sdcc3_default_state>, <&sdcc3_cd_pin_a>; status = "okay"; }; &tlmm_pinmux { - gsbi5_uart_pin_a: gsbi5-uart-pin-active { - rx { + gsbi5_uart_pin_a: gsbi5-uart-pin-active-state { + rx-pins { pins = "gpio52"; function = "gsbi5"; drive-strength = <2>; bias-pull-up; }; - tx { + tx-pins { pins = "gpio51"; function = "gsbi5"; drive-strength = <4>; @@ -396,7 +396,7 @@ }; - sdcc3_cd_pin_a: sdcc3-cd-pin-active { + sdcc3_cd_pin_a: sdcc3-cd-pin-active-state { pins = "gpio26"; function = "gpio"; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi index 769e151747c3..ac7494ed633e 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi @@ -302,7 +302,7 @@ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&ps_hold>; + pinctrl-0 = <&ps_hold_default_state>; }; sfpb_wrapper_mutex: syscon@1200000 { @@ -435,8 +435,8 @@ gsbi1_i2c: i2c@12460000 { compatible = "qcom,i2c-qup-v1.1.1"; - pinctrl-0 = <&i2c1_pins>; - pinctrl-1 = <&i2c1_pins_sleep>; + pinctrl-0 = <&i2c1_default_state>; + pinctrl-1 = <&i2c1_sleep_state>; pinctrl-names = "default", "sleep"; reg = <0x12460000 0x1000>; interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; @@ -465,8 +465,8 @@ gsbi2_i2c: i2c@124a0000 { compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x124a0000 0x1000>; - pinctrl-0 = <&i2c2_pins>; - pinctrl-1 = <&i2c2_pins_sleep>; + pinctrl-0 = <&i2c2_default_state>; + pinctrl-1 = <&i2c2_sleep_state>; pinctrl-names = "default", "sleep"; interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>; @@ -489,8 +489,8 @@ ranges; gsbi3_i2c: i2c@16280000 { compatible = "qcom,i2c-qup-v1.1.1"; - pinctrl-0 = <&i2c3_pins>; - pinctrl-1 = <&i2c3_pins_sleep>; + pinctrl-0 = <&i2c3_default_state>; + pinctrl-1 = <&i2c3_sleep_state>; pinctrl-names = "default", "sleep"; reg = <0x16280000 0x1000>; interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; @@ -528,8 +528,8 @@ gsbi4_i2c: i2c@16380000 { compatible = "qcom,i2c-qup-v1.1.1"; - pinctrl-0 = <&i2c4_pins>; - pinctrl-1 = <&i2c4_pins_sleep>; + pinctrl-0 = <&i2c4_default_state>; + pinctrl-1 = <&i2c4_sleep_state>; pinctrl-names = "default", "sleep"; reg = <0x16380000 0x1000>; interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; @@ -565,8 +565,8 @@ compatible = "qcom,spi-qup-v1.1.1"; reg = <0x1a280000 0x1000>; interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; - pinctrl-0 = <&spi5_default>; - pinctrl-1 = <&spi5_sleep>; + pinctrl-0 = <&spi5_default_state>; + pinctrl-1 = <&spi5_sleep_state>; pinctrl-names = "default", "sleep"; clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; clock-names = "core", "iface"; @@ -599,8 +599,8 @@ gsbi6_i2c: i2c@16580000 { compatible = "qcom,i2c-qup-v1.1.1"; - pinctrl-0 = <&i2c6_pins>; - pinctrl-1 = <&i2c6_pins_sleep>; + pinctrl-0 = <&i2c6_default_state>; + pinctrl-1 = <&i2c6_sleep_state>; pinctrl-names = "default", "sleep"; reg = <0x16580000 0x1000>; interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; @@ -635,8 +635,8 @@ gsbi7_i2c: i2c@16680000 { compatible = "qcom,i2c-qup-v1.1.1"; - pinctrl-0 = <&i2c7_pins>; - pinctrl-1 = <&i2c7_pins_sleep>; + pinctrl-0 = <&i2c7_default_state>; + pinctrl-1 = <&i2c7_sleep_state>; pinctrl-names = "default", "sleep"; reg = <0x16680000 0x1000>; interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; @@ -871,7 +871,6 @@ compatible = "qcom,apq8064-sata-phy"; status = "disabled"; reg = <0x1b400000 0x200>; - reg-names = "phy_mem"; clocks = <&gcc SATA_PHY_CFG_CLK>; clock-names = "cfg"; #phy-cells = <0>; @@ -890,9 +889,9 @@ <&gcc SATA_PMALIVE_CLK>; clock-names = "slave_iface", "iface", - "bus", + "core", "rxoob", - "core_pmalive"; + "pmalive"; assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>; @@ -945,7 +944,7 @@ dmas = <&sdcc4bam 2>, <&sdcc4bam 1>; dma-names = "tx", "rx"; pinctrl-names = "default"; - pinctrl-0 = <&sdc4_gpios>; + pinctrl-0 = <&sdc4_default_state>; }; sdcc4bam: dma-controller@121c2000 { @@ -962,7 +961,7 @@ status = "disabled"; compatible = "arm,pl18x", "arm,primecell"; pinctrl-names = "default"; - pinctrl-0 = <&sdcc1_pins>; + pinctrl-0 = <&sdcc1_default_state>; arm,primecell-periphid = <0x00051180>; reg = <0x12400000 0x2000>; interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8084.dtsi index 2b52e5d5eb51..014e6c5ee889 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-apq8084.dtsi @@ -792,7 +792,7 @@ qcom,smd-edge = <15>; rpm-requests { - compatible = "qcom,rpm-apq8084"; + compatible = "qcom,rpm-apq8084", "qcom,smd-rpm"; qcom,smd-channels = "rpm_requests"; regulators-0 { diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi index da67d55fa557..0d23c03fae33 100644 --- a/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-ipq4018-ap120c-ac.dtsi @@ -28,46 +28,42 @@ }; &tlmm { - i2c0_pins: i2c0_pinmux { - mux_i2c { - function = "blsp_i2c0"; - pins = "gpio58", "gpio59"; - drive-strength = <16>; - bias-disable; - }; + i2c0_pins: i2c0-state { + function = "blsp_i2c0"; + pins = "gpio58", "gpio59"; + drive-strength = <16>; + bias-disable; }; - mdio_pins: mdio_pinmux { - mux_mdio { + mdio_pins: mdio-state { + mdio-pins { pins = "gpio53"; function = "mdio"; bias-pull-up; }; - mux_mdc { + mdc-pins { pins = "gpio52"; function = "mdc"; bias-pull-up; }; }; - serial0_pins: serial0_pinmux { - mux_uart { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; + serial0_pins: serial0-state { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; }; - spi0_pins: spi0_pinmux { - mux_spi { + spi0_pins: spi0-state { + spi0-pins { function = "blsp_spi0"; pins = "gpio55", "gpio56", "gpio57"; drive-strength = <12>; bias-disable; }; - mux_cs { + spi0-cs-pins { function = "gpio"; pins = "gpio54", "gpio4"; drive-strength = <2>; diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4018-jalapeno.dts b/arch/arm/boot/dts/qcom/qcom-ipq4018-jalapeno.dts index 365fbac417fd..ac3b30072a22 100644 --- a/arch/arm/boot/dts/qcom/qcom-ipq4018-jalapeno.dts +++ b/arch/arm/boot/dts/qcom/qcom-ipq4018-jalapeno.dts @@ -11,40 +11,35 @@ }; &tlmm { - mdio_pins: mdio_pinmux { - pinmux_1 { + mdio_pins: mdio-state { + mdio-pins { pins = "gpio53"; function = "mdio"; + bias-pull-up; }; - pinmux_2 { + mdc-pins { pins = "gpio52"; function = "mdc"; - }; - - pinconf { - pins = "gpio52", "gpio53"; bias-pull-up; }; }; - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; + serial_pins: serial-state{ + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; }; - spi_0_pins: spi_0_pinmux { - pin { + spi_0_pins: spi-0-state { + spi0-pins { function = "blsp_spi0"; pins = "gpio55", "gpio56", "gpio57"; drive-strength = <2>; bias-disable; }; - pin_cs { + spi0-cs-pins { function = "gpio"; pins = "gpio54", "gpio59"; drive-strength = <2>; diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi index f7ac8f9d0b6f..efbe89dd4793 100644 --- a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi @@ -34,30 +34,22 @@ }; &tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; + serial_pins: serial-state { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; }; - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - }; - pinmux_cs { - function = "gpio"; - pins = "gpio54"; - }; - pinconf { + spi_0_pins: spi-0-state { + spi0-pins { pins = "gpio55", "gpio56", "gpio57"; + function = "blsp_spi0"; drive-strength = <12>; bias-disable; }; - pinconf_cs { + spi0-cs-pins { pins = "gpio54"; + function = "gpio"; drive-strength = <2>; bias-disable; output-high; diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi index 374af6dd360a..91e296d2ea82 100644 --- a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi @@ -24,26 +24,26 @@ soc { pinctrl@1000000 { - serial_0_pins: serial0-pinmux { + serial_0_pins: serial0-state { pins = "gpio16", "gpio17"; function = "blsp_uart0"; bias-disable; }; - serial_1_pins: serial1-pinmux { + serial_1_pins: serial1-state { pins = "gpio8", "gpio9", "gpio10", "gpio11"; function = "blsp_uart1"; bias-disable; }; - spi_0_pins: spi-0-pinmux { - pinmux { + spi_0_pins: spi-0-state { + spi0-pins { function = "blsp_spi0"; pins = "gpio13", "gpio14", "gpio15"; bias-disable; }; - pinmux_cs { + spi0-cs-pins { function = "gpio"; pins = "gpio12"; bias-disable; @@ -51,13 +51,13 @@ }; }; - i2c_0_pins: i2c-0-pinmux { + i2c_0_pins: i2c-0-state { pins = "gpio20", "gpio21"; function = "blsp_i2c0"; bias-disable; }; - nand_pins: nand-pins { + nand_pins: nand-state { pins = "gpio53", "gpio55", "gpio56", "gpio57", "gpio58", "gpio59", "gpio60", "gpio62", "gpio63", diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c1.dts b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c1.dts index ea2987fcbff8..41c5874f6f97 100644 --- a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c1.dts +++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c1.dts @@ -19,20 +19,20 @@ }; pinctrl@1000000 { - serial_1_pins: serial1-pinmux { + serial_1_pins: serial1-state { pins = "gpio8", "gpio9", "gpio10", "gpio11"; function = "blsp_uart1"; bias-disable; }; - spi_0_pins: spi-0-pinmux { - pinmux { + spi_0_pins: spi-0-state { + spi0-pins { function = "blsp_spi0"; pins = "gpio13", "gpio14", "gpio15"; bias-disable; }; - pinmux_cs { + spio-cs-pins { function = "gpio"; pins = "gpio12"; bias-disable; diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c2.dts b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c2.dts index bd3553dd2070..67ee99d69757 100644 --- a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c2.dts +++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1-c2.dts @@ -9,7 +9,7 @@ soc { pinctrl@1000000 { - serial_1_pins: serial1-pinmux { + serial_1_pins: serial1-state { pins = "gpio8", "gpio9"; function = "blsp_uart1"; bias-disable; diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1.dtsi index 7ef635997efa..cc88cf5f0d9b 100644 --- a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk07.1.dtsi @@ -24,19 +24,19 @@ soc { pinctrl@1000000 { - serial_0_pins: serial0-pinmux { + serial_0_pins: serial0-state { pins = "gpio16", "gpio17"; function = "blsp_uart0"; bias-disable; }; - i2c_0_pins: i2c-0-pinmux { + i2c_0_pins: i2c-0-state { pins = "gpio20", "gpio21"; function = "blsp_i2c0"; bias-disable; }; - nand_pins: nand-pins { + nand_pins: nand-state { pins = "gpio53", "gpio55", "gpio56", "gpio57", "gpio58", "gpio59", "gpio60", "gpio62", "gpio63", diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom/qcom-ipq8064-ap148.dts index a654d3c22c4f..5a8bf1a6f559 100644 --- a/arch/arm/boot/dts/qcom/qcom-ipq8064-ap148.dts +++ b/arch/arm/boot/dts/qcom/qcom-ipq8064-ap148.dts @@ -7,12 +7,11 @@ soc { pinmux@800000 { - buttons_pins: buttons_pins { - mux { - pins = "gpio54", "gpio65"; - drive-strength = <2>; - bias-pull-up; - }; + buttons_pins: buttons-state { + pins = "gpio54", "gpio65"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom/qcom-ipq8064-rb3011.dts index 12e806adcda8..f09da9460c86 100644 --- a/arch/arm/boot/dts/qcom/qcom-ipq8064-rb3011.dts +++ b/arch/arm/boot/dts/qcom/qcom-ipq8064-rb3011.dts @@ -404,59 +404,49 @@ }; &qcom_pinmux { - buttons_pins: buttons_pins { - mux { - pins = "gpio66"; - drive-strength = <16>; - bias-disable; - }; + buttons_pins: buttons-state { + pins = "gpio66"; + function = "gpio"; + drive-strength = <16>; + bias-disable; }; - leds_pins: leds_pins { - mux { - pins = "gpio33"; - drive-strength = <16>; - bias-disable; - }; + leds_pins: leds-state { + pins = "gpio33"; + function = "gpio"; + drive-strength = <16>; + bias-disable; }; - mdio1_pins: mdio1_pins { - mux { - pins = "gpio10", "gpio11"; - function = "gpio"; - drive-strength = <8>; - bias-disable; - }; + mdio1_pins: mdio1-state { + pins = "gpio10", "gpio11"; + function = "gpio"; + drive-strength = <8>; + bias-disable; }; - sw0_reset_pin: sw0_reset_pin { - mux { - pins = "gpio16"; - drive-strength = <16>; - function = "gpio"; - bias-disable; - input-disable; - }; + sw0_reset_pin: sw0-reset-state { + pins = "gpio16"; + drive-strength = <16>; + function = "gpio"; + bias-disable; + input-disable; }; - sw1_reset_pin: sw1_reset_pin { - mux { - pins = "gpio17"; - drive-strength = <16>; - function = "gpio"; - bias-disable; - input-disable; - }; + sw1_reset_pin: sw1-reset-state { + pins = "gpio17"; + drive-strength = <16>; + function = "gpio"; + bias-disable; + input-disable; }; - usb1_pwr_en_pins: usb1_pwr_en_pins { - mux { - pins = "gpio4"; - function = "gpio"; - drive-strength = <16>; - bias-disable; - output-high; - }; + usb1_pwr_en_pins: usb1-pwr-en-state { + pins = "gpio4"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; }; }; diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi index da0fd75f4711..759a59c2bdbc 100644 --- a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi @@ -399,70 +399,58 @@ #interrupt-cells = <2>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - pcie0_pins: pcie0_pinmux { - mux { - pins = "gpio3"; - function = "pcie1_rst"; - drive-strength = <12>; - bias-disable; - }; + pcie0_pins: pcie0-state { + pins = "gpio3"; + function = "pcie1_rst"; + drive-strength = <12>; + bias-disable; }; - pcie1_pins: pcie1_pinmux { - mux { - pins = "gpio48"; - function = "pcie2_rst"; - drive-strength = <12>; - bias-disable; - }; + pcie1_pins: pcie1-state { + pins = "gpio48"; + function = "pcie2_rst"; + drive-strength = <12>; + bias-disable; }; - pcie2_pins: pcie2_pinmux { - mux { - pins = "gpio63"; - function = "pcie3_rst"; - drive-strength = <12>; - bias-disable; - }; + pcie2_pins: pcie2-state { + pins = "gpio63"; + function = "pcie3_rst"; + drive-strength = <12>; + bias-disable; }; - i2c4_pins: i2c4-default { + i2c4_pins: i2c4-state { pins = "gpio12", "gpio13"; function = "gsbi4"; drive-strength = <12>; bias-disable; }; - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19", "gpio21"; - function = "gsbi5"; - drive-strength = <10>; - bias-none; - }; + spi_pins: spi-state { + pins = "gpio18", "gpio19", "gpio21"; + function = "gsbi5"; + drive-strength = <10>; + bias-disable; }; - leds_pins: leds_pins { - mux { - pins = "gpio7", "gpio8", "gpio9", - "gpio26", "gpio53"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - output-low; - }; + leds_pins: leds-state { + pins = "gpio7", "gpio8", "gpio9", + "gpio26", "gpio53"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + output-low; }; - buttons_pins: buttons_pins { - mux { - pins = "gpio54"; - drive-strength = <2>; - bias-pull-up; - }; + buttons_pins: buttons-state { + pins = "gpio54"; + drive-strength = <2>; + bias-pull-up; }; - nand_pins: nand_pins { - mux { + nand_pins: nand-state { + nand-pins { pins = "gpio34", "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42", @@ -473,14 +461,14 @@ bias-disable; }; - pullups { + nand-pullup-pins { pins = "gpio39"; function = "nand"; drive-strength = <10>; bias-pull-up; }; - hold { + nand-hold-pins { pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44", "gpio45", "gpio46", "gpio47"; @@ -490,25 +478,21 @@ }; }; - mdio0_pins: mdio0-pins { - mux { - pins = "gpio0", "gpio1"; - function = "mdio"; - drive-strength = <8>; - bias-disable; - }; + mdio0_pins: mdio0-state { + pins = "gpio0", "gpio1"; + function = "mdio"; + drive-strength = <8>; + bias-disable; }; - rgmii2_pins: rgmii2-pins { - mux { - pins = "gpio27", "gpio28", "gpio29", - "gpio30", "gpio31", "gpio32", - "gpio51", "gpio52", "gpio59", - "gpio60", "gpio61", "gpio62"; - function = "rgmii2"; - drive-strength = <8>; - bias-disable; - }; + rgmii2_pins: rgmii2-state { + pins = "gpio27", "gpio28", "gpio29", + "gpio30", "gpio31", "gpio32", + "gpio51", "gpio52", "gpio59", + "gpio60", "gpio61", "gpio62"; + function = "rgmii2"; + drive-strength = <8>; + bias-disable; }; }; @@ -1292,7 +1276,7 @@ <&gcc SATA_A_CLK>, <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>; - clock-names = "slave_face", "iface", "core", + clock-names = "slave_iface", "iface", "core", "rxoob", "pmalive"; assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi index 8839b23fc693..ca76bf8af75e 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi @@ -84,6 +84,32 @@ }; }; +&blsp1_i2c2 { + status = "okay"; + + magnetometer: magnetometer@c { + compatible = "asahi-kasei,ak09911"; + reg = <0x0c>; + + vdd-supply = <&pm8226_l15>; + vid-supply = <&pm8226_l6>; + }; + + accelerometer: accelerometer@1e { + compatible = "kionix,kx022-1020"; + reg = <0x1e>; + + interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&pm8226_l15>; + vddio-supply = <&pm8226_l6>; + + mount-matrix = "1", "0", "0", + "0", "-1", "0", + "0", "0", "1"; + }; +}; + &blsp1_i2c5 { status = "okay"; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts index 992b7115b5f8..a28a83cb5340 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts @@ -10,6 +10,9 @@ #include "qcom-msm8226-microsoft-common.dtsi" +/* This device has no magnetometer */ +/delete-node/ &magnetometer; + / { model = "Nokia Lumia 630"; compatible = "microsoft,moneypenny", "qcom,msm8226"; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi index b2f92ad6499a..3a685ff7e8cc 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi @@ -12,6 +12,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/reset/qcom,gcc-msm8974.h> +#include <dt-bindings/thermal/thermal.h> / { #address-cells = <1>; @@ -44,8 +45,11 @@ device_type = "cpu"; reg = <0>; next-level-cache = <&L2>; + clocks = <&apcs>; + operating-points-v2 = <&cpu_opp_table>; qcom,acc = <&acc0>; qcom,saw = <&saw0>; + #cooling-cells = <2>; }; CPU1: cpu@1 { @@ -54,8 +58,11 @@ device_type = "cpu"; reg = <1>; next-level-cache = <&L2>; + clocks = <&apcs>; + operating-points-v2 = <&cpu_opp_table>; qcom,acc = <&acc1>; qcom,saw = <&saw1>; + #cooling-cells = <2>; }; CPU2: cpu@2 { @@ -64,8 +71,11 @@ device_type = "cpu"; reg = <2>; next-level-cache = <&L2>; + clocks = <&apcs>; + operating-points-v2 = <&cpu_opp_table>; qcom,acc = <&acc2>; qcom,saw = <&saw2>; + #cooling-cells = <2>; }; CPU3: cpu@3 { @@ -74,8 +84,11 @@ device_type = "cpu"; reg = <3>; next-level-cache = <&L2>; + clocks = <&apcs>; + operating-points-v2 = <&cpu_opp_table>; qcom,acc = <&acc3>; qcom,saw = <&saw3>; + #cooling-cells = <2>; }; L2: l2-cache { @@ -98,6 +111,29 @@ reg = <0x0 0x0>; }; + cpu_opp_table: opp-table-cpu { + compatible = "operating-points-v2"; + opp-shared; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + }; + + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + }; + + opp-787200000 { + opp-hz = /bits/ 64 <787200000>; + }; + + /* Higher CPU frequencies need speedbin support */ + }; + pmu { compatible = "arm,cortex-a7-pmu"; interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | @@ -121,11 +157,11 @@ smd-edge { interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 0>; + mboxes = <&apcs 0>; qcom,smd-edge = <15>; rpm_requests: rpm-requests { - compatible = "qcom,rpm-msm8226"; + compatible = "qcom,rpm-msm8226", "qcom,smd-rpm"; qcom,smd-channels = "rpm_requests"; rpmcc: clock-controller { @@ -199,7 +235,7 @@ interrupt-parent = <&intc>; interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 10>; + mboxes = <&apcs 10>; qcom,local-pid = <0>; qcom,remote-pid = <2>; @@ -231,9 +267,75 @@ #interrupt-cells = <3>; }; - apcs: syscon@f9011000 { - compatible = "syscon"; + apcs: mailbox@f9011000 { + compatible = "qcom,msm8226-apcs-kpss-global", + "qcom,msm8916-apcs-kpss-global", "syscon"; reg = <0xf9011000 0x1000>; + #mbox-cells = <1>; + clocks = <&a7pll>, <&gcc GPLL0_VOTE>; + clock-names = "pll", "aux"; + #clock-cells = <0>; + }; + + a7pll: clock@f9016000 { + compatible = "qcom,msm8226-a7pll"; + reg = <0xf9016000 0x40>; + #clock-cells = <0>; + clocks = <&xo_board>; + clock-names = "xo"; + operating-points-v2 = <&a7pll_opp_table>; + + a7pll_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-768000000 { + opp-hz = /bits/ 64 <768000000>; + }; + + opp-787200000 { + opp-hz = /bits/ 64 <787200000>; + }; + + opp-998400000 { + opp-hz = /bits/ 64 <998400000>; + }; + + opp-1094400000 { + opp-hz = /bits/ 64 <1094400000>; + }; + + opp-1190400000 { + opp-hz = /bits/ 64 <1190400000>; + }; + + opp-1305600000 { + opp-hz = /bits/ 64 <1305600000>; + }; + + opp-1344000000 { + opp-hz = /bits/ 64 <1344000000>; + }; + + opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + }; + + opp-1497600000 { + opp-hz = /bits/ 64 <1497600000>; + }; + + opp-1593600000 { + opp-hz = /bits/ 64 <1593600000>; + }; + + opp-1689600000 { + opp-hz = /bits/ 64 <1689600000>; + }; + + opp-1785600000 { + opp-hz = /bits/ 64 <1785600000>; + }; + }; }; saw_l2: power-manager@f9012000 { @@ -571,7 +673,7 @@ #reset-cells = <1>; #power-domain-cells = <1>; - clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + clocks = <&xo_board>, <&sleep_clk>; clock-names = "xo", "sleep_clk"; @@ -1130,7 +1232,7 @@ smd-edge { interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 8>; + mboxes = <&apcs 8>; qcom,smd-edge = <1>; label = "lpass"; @@ -1159,6 +1261,16 @@ thermal-sensors = <&tsens 5>; + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { cpu_alert0: trip0 { temperature = <75000>; @@ -1180,6 +1292,16 @@ thermal-sensors = <&tsens 2>; + cooling-maps { + map0 { + trip = <&cpu_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { cpu_alert1: trip0 { temperature = <75000>; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts index 53a6d4e85959..55077a5f2e34 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts @@ -13,6 +13,9 @@ /* This device has touchscreen on i2c1 instead */ /delete-node/ &touchscreen; +/* The magnetometer used on this device is currently unknown */ +/delete-node/ &magnetometer; + / { model = "Nokia Lumia 830"; compatible = "microsoft,tesla", "qcom,msm8926", "qcom,msm8226"; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi index 15568579459a..1bd87170252d 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi @@ -136,7 +136,7 @@ qcom,smd-edge = <15>; rpm_requests: rpm-requests { - compatible = "qcom,rpm-msm8974"; + compatible = "qcom,rpm-msm8974", "qcom,smd-rpm"; qcom,smd-channels = "rpm_requests"; rpmcc: clock-controller { @@ -149,7 +149,7 @@ }; }; - reserved-memory { + reserved_memory: reserved-memory { #address-cells = <1>; #size-cells = <1>; ranges; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte-common.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte-common.dtsi index b5443fd5b425..d3959741d2ea 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte-common.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte-common.dtsi @@ -438,6 +438,19 @@ }; }; +&reserved_memory { + ramoops@3e8e0000 { + compatible = "ramoops"; + reg = <0x3e8e0000 0x200000>; + + console-size = <0x100000>; + record-size = <0x10000>; + ftrace-size = <0x10000>; + pmsg-size = <0x80000>; + ecc-size = <8>; + }; +}; + &remoteproc_adsp { status = "okay"; cx-supply = <&pma8084_s2>; diff --git a/arch/arm/boot/dts/rockchip/rk3128.dtsi b/arch/arm/boot/dts/rockchip/rk3128.dtsi index 23e633387c24..d4572146d135 100644 --- a/arch/arm/boot/dts/rockchip/rk3128.dtsi +++ b/arch/arm/boot/dts/rockchip/rk3128.dtsi @@ -254,6 +254,30 @@ }; }; + vpu: video-codec@10106000 { + compatible = "rockchip,rk3128-vpu", "rockchip,rk3066-vpu"; + reg = <0x10106000 0x800>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "vepu", "vdpu"; + clocks = <&cru ACLK_VDPU>, <&cru HCLK_VDPU>, + <&cru ACLK_VEPU>, <&cru HCLK_VEPU>; + clock-names = "aclk_vdpu", "hclk_vdpu", + "aclk_vepu", "hclk_vepu"; + iommus = <&vpu_mmu>; + power-domains = <&power RK3128_PD_VIDEO>; + }; + + vpu_mmu: iommu@10106800 { + compatible = "rockchip,iommu"; + reg = <0x10106800 0x100>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_VEPU>, <&cru HCLK_VDPU>; + clock-names = "aclk", "iface"; + power-domains = <&power RK3128_PD_VIDEO>; + #iommu-cells = <0>; + }; + vop: vop@1010e000 { compatible = "rockchip,rk3126-vop"; reg = <0x1010e000 0x300>; @@ -429,7 +453,7 @@ compatible = "rockchip,sfc"; reg = <0x1020c000 0x8000>; interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_SFC>, <&cru 479>; + clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>; clock-names = "clk_sfc", "hclk_sfc"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/rockchip/rv1108-elgin-r1.dts b/arch/arm/boot/dts/rockchip/rv1108-elgin-r1.dts index 2d9994379eb2..89ca2f8d3809 100644 --- a/arch/arm/boot/dts/rockchip/rv1108-elgin-r1.dts +++ b/arch/arm/boot/dts/rockchip/rv1108-elgin-r1.dts @@ -168,8 +168,8 @@ pinctrl-0 = <&spim1_clk &spim1_cs0 &spim1_tx &spim1_rx>; status = "okay"; - dh2228fv: dac@0 { - compatible = "rohm,dh2228fv"; + display: display@0 { + compatible = "elgin,jg10309-01"; reg = <0>; spi-max-frequency = <24000000>; spi-cpha; diff --git a/arch/arm/boot/dts/rockchip/rv1126-pinctrl.dtsi b/arch/arm/boot/dts/rockchip/rv1126-pinctrl.dtsi index 06b1d7f2d858..35ef6732281f 100644 --- a/arch/arm/boot/dts/rockchip/rv1126-pinctrl.dtsi +++ b/arch/arm/boot/dts/rockchip/rv1126-pinctrl.dtsi @@ -97,6 +97,156 @@ <0 RK_PC3 1 &pcfg_pull_none_drv_level_0_smt>; }; }; + i2c3 { + /omit-if-no-ref/ + i2c3m0_xfer: i2c3m0-xfer { + rockchip,pins = + /* i2c3_scl_m0 */ + <3 RK_PA4 5 &pcfg_pull_none>, + /* i2c3_sda_m0 */ + <3 RK_PA5 5 &pcfg_pull_none>; + }; + /omit-if-no-ref/ + i2c3m1_xfer: i2c3m1-xfer { + rockchip,pins = + /* i2c3_scl_m1 */ + <2 RK_PD4 7 &pcfg_pull_none>, + /* i2c3_sda_m1 */ + <2 RK_PD5 7 &pcfg_pull_none>; + }; + /omit-if-no-ref/ + i2c3m2_xfer: i2c3m2-xfer { + rockchip,pins = + /* i2c3_scl_m2 */ + <1 RK_PD6 3 &pcfg_pull_none>, + /* i2c3_sda_m2 */ + <1 RK_PD7 3 &pcfg_pull_none>; + }; + }; + i2s0 { + i2s0m0_lrck_tx: i2s0m0-lrck-tx { + rockchip,pins = + /* i2s0_lrck_tx_m0 */ + <3 RK_PD3 1 &pcfg_pull_none>; + }; + i2s0m0_lrck_rx: i2s0m0-lrck-rx { + rockchip,pins = + /* i2s0_lrck_rx_m0 */ + <3 RK_PD4 1 &pcfg_pull_none>; + }; + i2s0m0_mclk: i2s0m0-mclk { + rockchip,pins = + /* i2s0_mclk_m0 */ + <3 RK_PD2 1 &pcfg_pull_none>; + }; + i2s0m0_sclk_rx: i2s0m0-sclk-rx { + rockchip,pins = + /* i2s0_sclk_rx_m0 */ + <3 RK_PD1 1 &pcfg_pull_none>; + }; + i2s0m0_sclk_tx: i2s0m0-sclk-tx { + rockchip,pins = + /* i2s0_sclk_tx_m0 */ + <3 RK_PD0 1 &pcfg_pull_none>; + }; + i2s0m0_sdi0: i2s0m0-sdi0 { + rockchip,pins = + /* i2s0_sdi0_m0 */ + <3 RK_PD6 1 &pcfg_pull_none>; + }; + i2s0m0_sdo0: i2s0m0-sdo0 { + rockchip,pins = + /* i2s0_sdo0_m0 */ + <3 RK_PD5 1 &pcfg_pull_none>; + }; + i2s0m0_sdo1_sdi3: i2s0m0-sdo1-sdi3 { + rockchip,pins = + /* i2s0_sdo1_sdi3_m0 */ + <3 RK_PD7 1 &pcfg_pull_none>; + }; + i2s0m0_sdo2_sdi2: i2s0m0-sdo2-sdi2 { + rockchip,pins = + /* i2s0_sdo2_sdi2_m0 */ + <4 RK_PA0 1 &pcfg_pull_none>; + }; + i2s0m0_sdo3_sdi1: i2s0m0-sdo3-sdi1 { + rockchip,pins = + /* i2s0_sdo3_sdi1_m0 */ + <4 RK_PA1 1 &pcfg_pull_none>; + }; + i2s0m1_lrck_tx: i2s0m1-lrck-tx { + rockchip,pins = + /* i2s0_lrck_tx_m1 */ + <3 RK_PA5 3 &pcfg_pull_none>; + }; + i2s0m1_lrck_rx: i2s0m1-lrck-rx { + rockchip,pins = + /* i2s0_lrck_rx_m1 */ + <3 RK_PB2 3 &pcfg_pull_none>; + }; + i2s0m1_mclk: i2s0m1-mclk { + rockchip,pins = + /* i2s0_mclk_m1 */ + <3 RK_PB0 3 &pcfg_pull_none>; + }; + i2s0m1_sclk_rx: i2s0m1-sclk-rx { + rockchip,pins = + /* i2s0_sclk_rx_m1 */ + <3 RK_PB1 3 &pcfg_pull_none>; + }; + i2s0m1_sclk_tx: i2s0m1-sclk-tx { + rockchip,pins = + /* i2s0_sclk_tx_m1 */ + <3 RK_PA4 3 &pcfg_pull_none>; + }; + i2s0m1_sdi0: i2s0m1-sdi0 { + rockchip,pins = + /* i2s0_sdi0_m1 */ + <3 RK_PA7 3 &pcfg_pull_none>; + }; + i2s0m1_sdo0: i2s0m1-sdo0 { + rockchip,pins = + /* i2s0_sdo0_m1 */ + <3 RK_PA6 3 &pcfg_pull_none>; + }; + i2s0m1_sdo1_sdi3: i2s0m1-sdo1-sdi3 { + rockchip,pins = + /* i2s0_sdo1_sdi3_m1 */ + <3 RK_PB3 3 &pcfg_pull_none>; + }; + i2s0m1_sdo2_sdi2: i2s0m1-sdo2-sdi2 { + rockchip,pins = + /* i2s0_sdo2_sdi2_m1 */ + <3 RK_PB4 3 &pcfg_pull_none>; + }; + i2s0m1_sdo3_sdi1: i2s0m1-sdo3-sdi1 { + rockchip,pins = + /* i2s0_sdo3_sdi1_m1 */ + <3 RK_PB5 3 &pcfg_pull_none>; + }; + }; + pwm0 { + /omit-if-no-ref/ + pwm0m0_pins: pwm0m0-pins { + rockchip,pins = + /* pwm0_pin_m0 */ + <0 RK_PB6 3 &pcfg_pull_none>; + }; + /omit-if-no-ref/ + pwm0m1_pins: pwm0m1-pins { + rockchip,pins = + /* pwm0_pin_m1 */ + <2 RK_PB3 5 &pcfg_pull_none>; + }; + }; + pwm1 { + /omit-if-no-ref/ + pwm1m0_pins: pwm1m0-pins { + rockchip,pins = + /* pwm1_pin_m0 */ + <0 RK_PB7 3 &pcfg_pull_none>; + }; + }; pwm2 { /omit-if-no-ref/ pwm2m0_pins: pwm2m0-pins { @@ -104,6 +254,106 @@ /* pwm2_pin_m0 */ <0 RK_PC0 3 &pcfg_pull_none>; }; + /omit-if-no-ref/ + pwm2m1_pins: pwm2m1-pins { + rockchip,pins = + /* pwm2_pin_m1 */ + <2 RK_PB1 5 &pcfg_pull_none>; + }; + }; + pwm3 { + /omit-if-no-ref/ + pwm3m0_pins: pwm3m0-pins { + rockchip,pins = + /* pwm3_pin_m0 */ + <0 RK_PC1 3 &pcfg_pull_none>; + }; + }; + pwm4 { + /omit-if-no-ref/ + pwm4m0_pins: pwm4m0-pins { + rockchip,pins = + /* pwm4_pin_m0 */ + <0 RK_PC2 3 &pcfg_pull_none>; + }; + }; + pwm5 { + /omit-if-no-ref/ + pwm5m0_pins: pwm5m0-pins { + rockchip,pins = + /* pwm5_pin_m0 */ + <0 RK_PC3 3 &pcfg_pull_none>; + }; + }; + pwm6 { + /omit-if-no-ref/ + pwm6m0_pins: pwm6m0-pins { + rockchip,pins = + /* pwm6_pin_m0 */ + <0 RK_PB2 3 &pcfg_pull_none>; + }; + /omit-if-no-ref/ + pwm6m1_pins: pwm6m1-pins { + rockchip,pins = + /* pwm6_pin_m1 */ + <2 RK_PD4 5 &pcfg_pull_none>; + }; + }; + pwm7 { + /omit-if-no-ref/ + pwm7m0_pins: pwm7m0-pins { + rockchip,pins = + /* pwm7_pin_m0 */ + <0 RK_PB1 3 &pcfg_pull_none>; + }; + /omit-if-no-ref/ + pwm7m1_pins: pwm7m1-pins { + rockchip,pins = + /* pwm7_pin_m1 */ + <3 RK_PA0 5 &pcfg_pull_none>; + }; + }; + pwm8 { + /omit-if-no-ref/ + pwm8m0_pins: pwm8m0-pins { + rockchip,pins = + /* pwm8_pin_m0 */ + <3 RK_PA4 6 &pcfg_pull_none>; + }; + /omit-if-no-ref/ + pwm8m1_pins: pwm8m1-pins { + rockchip,pins = + /* pwm8_pin_m1 */ + <2 RK_PD7 5 &pcfg_pull_none>; + }; + }; + pwm9 { + /omit-if-no-ref/ + pwm9m0_pins: pwm9m0-pins { + rockchip,pins = + /* pwm9_pin_m0 */ + <3 RK_PA5 6 &pcfg_pull_none>; + }; + /omit-if-no-ref/ + pwm9m1_pins: pwm9m1-pins { + rockchip,pins = + /* pwm9_pin_m1 */ + <2 RK_PD6 5 &pcfg_pull_none>; + }; + }; + pwm10 { + /omit-if-no-ref/ + pwm10m0_pins: pwm10m0-pins { + rockchip,pins = + /* pwm10_pin_m0 */ + <3 RK_PA6 6 &pcfg_pull_none>; + }; + /omit-if-no-ref/ + pwm10m1_pins: pwm10m1-pins { + rockchip,pins = + /* pwm10_pin_m1 */ + <2 RK_PD5 5 &pcfg_pull_none>; + }; }; pwm11 { /omit-if-no-ref/ @@ -112,6 +362,12 @@ /* pwm11_pin_m0 */ <3 RK_PA7 6 &pcfg_pull_none>; }; + /omit-if-no-ref/ + pwm11m1_pins: pwm11m1-pins { + rockchip,pins = + /* pwm11_pin_m1 */ + <3 RK_PA1 5 &pcfg_pull_none>; + }; }; rgmii { /omit-if-no-ref/ diff --git a/arch/arm/boot/dts/rockchip/rv1126.dtsi b/arch/arm/boot/dts/rockchip/rv1126.dtsi index bb603cae13df..434846b85c95 100644 --- a/arch/arm/boot/dts/rockchip/rv1126.dtsi +++ b/arch/arm/boot/dts/rockchip/rv1126.dtsi @@ -22,6 +22,7 @@ aliases { i2c0 = &i2c0; i2c2 = &i2c2; + i2c3 = &i2c3; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; @@ -268,6 +269,28 @@ status = "disabled"; }; + pwm0: pwm@ff430000 { + compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm"; + reg = <0xff430000 0x10>; + clock-names = "pwm", "pclk"; + clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0m0_pins>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm1: pwm@ff430010 { + compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm"; + reg = <0xff430010 0x10>; + clock-names = "pwm", "pclk"; + clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm1m0_pins>; + #pwm-cells = <3>; + status = "disabled"; + }; + pwm2: pwm@ff430020 { compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm"; reg = <0xff430020 0x10>; @@ -279,6 +302,61 @@ status = "disabled"; }; + pwm3: pwm@ff430030 { + compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm"; + reg = <0xff430030 0x10>; + clock-names = "pwm", "pclk"; + clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm3m0_pins>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm4: pwm@ff440000 { + compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm"; + reg = <0xff440000 0x10>; + clock-names = "pwm", "pclk"; + clocks = <&pmucru CLK_PWM1>, <&pmucru PCLK_PWM1>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm4m0_pins>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm5: pwm@ff440010 { + compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm"; + reg = <0xff440010 0x10>; + clock-names = "pwm", "pclk"; + clocks = <&pmucru CLK_PWM1>, <&pmucru PCLK_PWM1>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm5m0_pins>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm6: pwm@ff440020 { + compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm"; + reg = <0xff440020 0x10>; + clock-names = "pwm", "pclk"; + clocks = <&pmucru CLK_PWM1>, <&pmucru PCLK_PWM1>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm6m0_pins>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm7: pwm@ff440030 { + compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm"; + reg = <0xff440030 0x10>; + clock-names = "pwm", "pclk"; + clocks = <&pmucru CLK_PWM1>, <&pmucru PCLK_PWM1>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm7m0_pins>; + #pwm-cells = <3>; + status = "disabled"; + }; + pmucru: clock-controller@ff480000 { compatible = "rockchip,rv1126-pmucru"; reg = <0xff480000 0x1000>; @@ -308,6 +386,53 @@ clock-names = "apb_pclk"; }; + i2c3: i2c@ff520000 { + compatible = "rockchip,rv1126-i2c", "rockchip,rk3399-i2c"; + reg = <0xff520000 0x1000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru CLK_I2C3>, <&cru PCLK_I2C3>; + clock-names = "i2c", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3m0_xfer>; + rockchip,grf = <&pmugrf>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pwm8: pwm@ff550000 { + compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm"; + reg = <0xff550000 0x10>; + clock-names = "pwm", "pclk"; + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; + pinctrl-0 = <&pwm8m0_pins>; + pinctrl-names = "default"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm9: pwm@ff550010 { + compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm"; + reg = <0xff550010 0x10>; + clock-names = "pwm", "pclk"; + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; + pinctrl-0 = <&pwm9m0_pins>; + pinctrl-names = "default"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm10: pwm@ff550020 { + compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm"; + reg = <0xff550020 0x10>; + clock-names = "pwm", "pclk"; + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; + pinctrl-0 = <&pwm10m0_pins>; + pinctrl-names = "default"; + #pwm-cells = <3>; + status = "disabled"; + }; + pwm11: pwm@ff550030 { compatible = "rockchip,rv1126-pwm", "rockchip,rk3328-pwm"; reg = <0xff550030 0x10>; @@ -419,6 +544,32 @@ clock-names = "pclk", "timer"; }; + i2s0: i2s@ff800000 { + compatible = "rockchip,rv1126-i2s-tdm"; + reg = <0xff800000 0x1000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru MCLK_I2S0_TX>, <&cru MCLK_I2S0_RX>, <&cru HCLK_I2S0>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + dmas = <&dmac 20>, <&dmac 19>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0m0_sclk_tx>, + <&i2s0m0_sclk_rx>, + <&i2s0m0_mclk>, + <&i2s0m0_lrck_tx>, + <&i2s0m0_lrck_rx>, + <&i2s0m0_sdi0>, + <&i2s0m0_sdo0>, + <&i2s0m0_sdo1_sdi3>, + <&i2s0m0_sdo2_sdi2>, + <&i2s0m0_sdo3_sdi1>; + resets = <&cru SRST_I2S0_TX_M>, <&cru SRST_I2S0_RX_M>; + reset-names = "tx-m", "rx-m"; + rockchip,grf = <&grf>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + vop: vop@ffb00000 { compatible = "rockchip,rv1126-vop"; reg = <0xffb00000 0x200>, <0xffb00a00 0x400>; diff --git a/arch/arm/boot/dts/st/Makefile b/arch/arm/boot/dts/st/Makefile index 015903d09323..eab3a9bd435f 100644 --- a/arch/arm/boot/dts/st/Makefile +++ b/arch/arm/boot/dts/st/Makefile @@ -35,8 +35,11 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32mp151a-prtt1c.dtb \ stm32mp151a-prtt1s.dtb \ stm32mp151a-dhcor-testbench.dtb \ + stm32mp151c-mecio1r0.dtb \ + stm32mp151c-mect1s.dtb \ stm32mp153c-dhcom-drc02.dtb \ stm32mp153c-dhcor-drc-compact.dtb \ + stm32mp153c-mecio1r1.dtb \ stm32mp157a-avenger96.dtb \ stm32mp157a-dhcor-avenger96.dtb \ stm32mp157a-dk1.dtb \ diff --git a/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi b/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi index c9f588a65094..8db1ec4a3b26 100644 --- a/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi +++ b/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi @@ -94,14 +94,20 @@ /omit-if-no-ref/ eth1_rgmii_sleep_pins_a: eth1-rgmii-sleep-0 { pins1 { + pinmux = <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */ + <STM32_PINMUX('G', 2, AF11)>; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + + pins2 { pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */ <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */ <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */ <STM32_PINMUX('E', 5, ANALOG)>, /* ETH_RGMII_TXD3 */ <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */ <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_RGMII_GTX_CLK */ - <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */ - <STM32_PINMUX('G', 2, ANALOG)>, /* ETH_MDC */ <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */ <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */ <STM32_PINMUX('B', 0, ANALOG)>, /* ETH_RGMII_RXD1 */ @@ -178,14 +184,20 @@ /omit-if-no-ref/ eth2_rgmii_sleep_pins_a: eth2-rgmii-sleep-0 { pins1 { + pinmux = <STM32_PINMUX('B', 6, AF11)>, /* ETH_MDIO */ + <STM32_PINMUX('G', 5, AF10)>; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + + pins2 { pinmux = <STM32_PINMUX('F', 7, ANALOG)>, /* ETH_RGMII_TXD0 */ <STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RGMII_TXD1 */ <STM32_PINMUX('G', 1, ANALOG)>, /* ETH_RGMII_TXD2 */ <STM32_PINMUX('E', 6, ANALOG)>, /* ETH_RGMII_TXD3 */ <STM32_PINMUX('F', 6, ANALOG)>, /* ETH_RGMII_TX_CTL */ <STM32_PINMUX('G', 3, ANALOG)>, /* ETH_RGMII_GTX_CLK */ - <STM32_PINMUX('B', 6, ANALOG)>, /* ETH_MDIO */ - <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_MDC */ <STM32_PINMUX('F', 4, ANALOG)>, /* ETH_RGMII_RXD0 */ <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_RXD1 */ <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */ diff --git a/arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts b/arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts index bacb70b4256b..853dc21449d9 100644 --- a/arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts +++ b/arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts @@ -75,6 +75,8 @@ }; ðernet1 { + nvmem-cell-names = "mac-address"; + nvmem-cells = <ðernet_mac1_address>; phy-handle = <ðphy1>; phy-mode = "rgmii-id"; pinctrl-0 = <ð1_rgmii_pins_a>; @@ -94,14 +96,36 @@ interrupt-parent = <&gpiog>; interrupts = <12 IRQ_TYPE_LEVEL_LOW>; reg = <1>; + realtek,clkout-disable; reset-assert-us = <15000>; reset-deassert-us = <55000>; reset-gpios = <&gpioa 11 GPIO_ACTIVE_LOW>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_WAN; + linux,default-trigger = "netdev"; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_YELLOW>; + function = LED_FUNCTION_WAN; + linux,default-trigger = "netdev"; + }; + }; }; }; }; ðernet2 { + nvmem-cell-names = "mac-address"; + nvmem-cells = <ðernet_mac2_address>; phy-handle = <ðphy2>; phy-mode = "rgmii-id"; pinctrl-0 = <ð2_rgmii_pins_a>; @@ -121,9 +145,29 @@ interrupt-parent = <&gpiog>; interrupts = <15 IRQ_TYPE_LEVEL_LOW>; reg = <1>; + realtek,clkout-disable; reset-assert-us = <15000>; reset-deassert-us = <55000>; reset-gpios = <&gpiog 8 GPIO_ACTIVE_LOW>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + linux,default-trigger = "netdev"; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_YELLOW>; + function = LED_FUNCTION_LAN; + linux,default-trigger = "netdev"; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi index ae83e7b10232..70e132dc6147 100644 --- a/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi @@ -2229,6 +2229,9 @@ <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */ <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */ <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/st/stm32mp151a-prtt1a.dts b/arch/arm/boot/dts/st/stm32mp151a-prtt1a.dts index 75874eafde11..8e1dd84e0c0a 100644 --- a/arch/arm/boot/dts/st/stm32mp151a-prtt1a.dts +++ b/arch/arm/boot/dts/st/stm32mp151a-prtt1a.dts @@ -28,16 +28,12 @@ }; }; -&pwm5_pins_a { - pins { - pinmux = <STM32_PINMUX('A', 0, AF2)>; /* TIM5_CH1 */ - }; +&{pwm5_pins_a/pins} { + pinmux = <STM32_PINMUX('A', 0, AF2)>; /* TIM5_CH1 */ }; -&pwm5_sleep_pins_a { - pins { - pinmux = <STM32_PINMUX('A', 0, ANALOG)>; /* TIM5_CH1 */ - }; +&{pwm5_sleep_pins_a/pins} { + pinmux = <STM32_PINMUX('A', 0, ANALOG)>; /* TIM5_CH1 */ }; &timers5 { diff --git a/arch/arm/boot/dts/st/stm32mp151a-prtt1c.dts b/arch/arm/boot/dts/st/stm32mp151a-prtt1c.dts index c90d815f906b..3b33b7093b68 100644 --- a/arch/arm/boot/dts/st/stm32mp151a-prtt1c.dts +++ b/arch/arm/boot/dts/st/stm32mp151a-prtt1c.dts @@ -168,52 +168,42 @@ status = "okay"; }; -&sdmmc2_b4_od_pins_a { - pins1 { - pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ - <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */ - <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ - <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */ - }; +&{sdmmc2_b4_od_pins_a/pins1} { + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */ }; -&sdmmc2_b4_pins_a { - pins1 { - pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ - <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */ - <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ - <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */ - <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */ - }; +&{sdmmc2_b4_pins_a/pins1} { + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */ + <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */ }; -&sdmmc2_b4_sleep_pins_a { - pins { - pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */ - <STM32_PINMUX('B', 7, ANALOG)>, /* SDMMC2_D1 */ - <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */ - <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */ - <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */ - <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */ - }; +&{sdmmc2_b4_sleep_pins_a/pins} { + pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 7, ANALOG)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */ + <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */ + <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */ }; -&sdmmc2_d47_pins_a { - pins { - pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */ - <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */ - <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */ - <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */ - }; +&{sdmmc2_d47_pins_a/pins} { + pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */ + <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */ + <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */ }; -&sdmmc2_d47_sleep_pins_a { - pins { - pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */ - <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */ - <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */ - <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */ - }; +&{sdmmc2_d47_sleep_pins_a/pins} { + pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */ + <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */ + <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */ }; &sdmmc3 { @@ -238,34 +228,28 @@ }; }; -&sdmmc3_b4_od_pins_b { - pins1 { - pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */ - <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */ - <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */ - <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */ - }; +&{sdmmc3_b4_od_pins_b/pins1} { + pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */ + <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */ + <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */ }; -&sdmmc3_b4_pins_b { - pins1 { - pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */ - <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */ - <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */ - <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */ - <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */ - }; +&{sdmmc3_b4_pins_b/pins1} { + pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */ + <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */ + <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */ + <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */ }; -&sdmmc3_b4_sleep_pins_b { - pins { - pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* SDMMC3_D0 */ - <STM32_PINMUX('D', 4, ANALOG)>, /* SDMMC3_D1 */ - <STM32_PINMUX('D', 5, ANALOG)>, /* SDMMC3_D2 */ - <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */ - <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */ - <STM32_PINMUX('D', 0, ANALOG)>; /* SDMMC3_CMD */ - }; +&{sdmmc3_b4_sleep_pins_b/pins} { + pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* SDMMC3_D0 */ + <STM32_PINMUX('D', 4, ANALOG)>, /* SDMMC3_D1 */ + <STM32_PINMUX('D', 5, ANALOG)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */ + <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */ + <STM32_PINMUX('D', 0, ANALOG)>; /* SDMMC3_CMD */ }; &spi1 { diff --git a/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi b/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi index 3938d357e198..98a31c2b5d45 100644 --- a/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi +++ b/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi @@ -69,30 +69,27 @@ status = "okay"; }; -ðernet0_rmii_pins_a { - pins1 { - pinmux = <STM32_PINMUX('B', 12, AF11)>, /* ETH1_RMII_TXD0 */ - <STM32_PINMUX('B', 13, AF11)>, /* ETH1_RMII_TXD1 */ - <STM32_PINMUX('B', 11, AF11)>; /* ETH1_RMII_TX_EN */ - }; - pins2 { - pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH1_RMII_RXD0 */ - <STM32_PINMUX('C', 5, AF11)>, /* ETH1_RMII_RXD1 */ - <STM32_PINMUX('A', 1, AF11)>, /* ETH1_RMII_REF_CLK input */ - <STM32_PINMUX('A', 7, AF11)>; /* ETH1_RMII_CRS_DV */ - }; +&{ethernet0_rmii_pins_a/pins1} { + pinmux = <STM32_PINMUX('B', 12, AF11)>, /* ETH1_RMII_TXD0 */ + <STM32_PINMUX('B', 13, AF11)>, /* ETH1_RMII_TXD1 */ + <STM32_PINMUX('B', 11, AF11)>; /* ETH1_RMII_TX_EN */ }; -ðernet0_rmii_sleep_pins_a { - pins1 { - pinmux = <STM32_PINMUX('B', 12, ANALOG)>, /* ETH1_RMII_TXD0 */ - <STM32_PINMUX('B', 13, ANALOG)>, /* ETH1_RMII_TXD1 */ - <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */ - <STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RMII_RXD0 */ - <STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RMII_RXD1 */ - <STM32_PINMUX('A', 1, ANALOG)>, /* ETH1_RMII_REF_CLK */ - <STM32_PINMUX('A', 7, ANALOG)>; /* ETH1_RMII_CRS_DV */ - }; +&{ethernet0_rmii_pins_a/pins2} { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH1_RMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH1_RMII_RXD1 */ + <STM32_PINMUX('A', 1, AF11)>, /* ETH1_RMII_REF_CLK input */ + <STM32_PINMUX('A', 7, AF11)>; /* ETH1_RMII_CRS_DV */ +}; + +&{ethernet0_rmii_sleep_pins_a/pins1} { + pinmux = <STM32_PINMUX('B', 12, ANALOG)>, /* ETH1_RMII_TXD0 */ + <STM32_PINMUX('B', 13, ANALOG)>, /* ETH1_RMII_TXD1 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RMII_RXD1 */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH1_RMII_REF_CLK */ + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH1_RMII_CRS_DV */ }; &iwdg2 { @@ -122,12 +119,11 @@ }; }; -&qspi_bk1_pins_a { - pins1 { - bias-pull-up; - drive-push-pull; - slew-rate = <1>; - }; +&{qspi_bk1_pins_a/pins} { + /delete-property/ bias-disable; + bias-pull-up; + drive-push-pull; + slew-rate = <1>; }; &rng1 { @@ -147,22 +143,24 @@ status = "okay"; }; -&sdmmc1_b4_od_pins_a { - pins1 { - bias-pull-up; - }; - pins2 { - bias-pull-up; - }; +&{sdmmc1_b4_od_pins_a/pins1} { + /delete-property/ bias-disable; + bias-pull-up; }; -&sdmmc1_b4_pins_a { - pins1 { - bias-pull-up; - }; - pins2 { - bias-pull-up; - }; +&{sdmmc1_b4_od_pins_a/pins2} { + /delete-property/ bias-disable; + bias-pull-up; +}; + +&{sdmmc1_b4_pins_a/pins1} { + /delete-property/ bias-disable; + bias-pull-up; +}; + +&{sdmmc1_b4_pins_a/pins2} { + /delete-property/ bias-disable; + bias-pull-up; }; &uart4 { @@ -175,34 +173,30 @@ status = "okay"; }; -&uart4_idle_pins_a { - pins1 { - pinmux = <STM32_PINMUX('B', 9, ANALOG)>; /* UART4_TX */ - }; - pins2 { - pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ - bias-pull-up; - }; +&{uart4_idle_pins_a/pins1} { + pinmux = <STM32_PINMUX('B', 9, ANALOG)>; /* UART4_TX */ }; -&uart4_pins_a { - pins1 { - pinmux = <STM32_PINMUX('B', 9, AF8)>; /* UART4_TX */ - bias-disable; - drive-push-pull; - slew-rate = <0>; - }; - pins2 { - pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ - bias-pull-up; - }; +&{uart4_idle_pins_a/pins2} { + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ + /delete-property/ bias-disable; + bias-pull-up; }; -&uart4_sleep_pins_a { - pins { - pinmux = <STM32_PINMUX('B', 9, ANALOG)>, /* UART4_TX */ - <STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */ - }; +&{uart4_pins_a/pins1} { + pinmux = <STM32_PINMUX('B', 9, AF8)>; /* UART4_TX */ + slew-rate = <0>; +}; + +&{uart4_pins_a/pins2} { + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ + /delete-property/ bias-disable; + bias-pull-up; +}; + +&{uart4_sleep_pins_a/pins} { + pinmux = <STM32_PINMUX('B', 9, ANALOG)>, /* UART4_TX */ + <STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */ }; &usbh_ehci { diff --git a/arch/arm/boot/dts/st/stm32mp151a-prtt1s.dts b/arch/arm/boot/dts/st/stm32mp151a-prtt1s.dts index ad25929e64e6..b6be61b159e7 100644 --- a/arch/arm/boot/dts/st/stm32mp151a-prtt1s.dts +++ b/arch/arm/boot/dts/st/stm32mp151a-prtt1s.dts @@ -36,18 +36,14 @@ }; }; -&i2c1_pins_a { - pins { - pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */ - <STM32_PINMUX('D', 13, AF5)>; /* I2C1_SDA */ - }; +&{i2c1_pins_a/pins} { + pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */ + <STM32_PINMUX('D', 13, AF5)>; /* I2C1_SDA */ }; -&i2c1_sleep_pins_a { - pins { - pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */ - <STM32_PINMUX('D', 13, ANALOG)>; /* I2C1_SDA */ - }; +&{i2c1_sleep_pins_a/pins} { + pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */ + <STM32_PINMUX('D', 13, ANALOG)>; /* I2C1_SDA */ }; &mdio0 { diff --git a/arch/arm/boot/dts/st/stm32mp151c-mecio1r0.dts b/arch/arm/boot/dts/st/stm32mp151c-mecio1r0.dts new file mode 100644 index 000000000000..a5ea1431c399 --- /dev/null +++ b/arch/arm/boot/dts/st/stm32mp151c-mecio1r0.dts @@ -0,0 +1,48 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) Protonic Holland + * Author: David Jander <david@protonic.nl> + */ +/dts-v1/; + +#include "stm32mp151.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxaa-pinctrl.dtsi" +#include "stm32mp15x-mecio1-io.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "Protonic MECIO1r0"; + compatible = "prt,mecio1r0", "st,stm32mp151"; + + led { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_DEBUG; + gpios = <&gpioa 13 GPIO_ACTIVE_HIGH>; + }; + + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DEBUG; + gpios = <&gpioa 14 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&clk_hse { + clock-frequency = <25000000>; +}; + +ðernet0 { + assigned-clocks = <&rcc ETHCK_K>, <&rcc PLL3_Q>; + assigned-clock-parents = <&rcc PLL3_Q>; + assigned-clock-rates = <125000000>; /* Clock PLL3 to 625Mhz in tf-a. */ + st,eth-clk-sel; +}; diff --git a/arch/arm/boot/dts/st/stm32mp151c-mect1s.dts b/arch/arm/boot/dts/st/stm32mp151c-mect1s.dts new file mode 100644 index 000000000000..a1b8c3646e98 --- /dev/null +++ b/arch/arm/boot/dts/st/stm32mp151c-mect1s.dts @@ -0,0 +1,290 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) Protonic Holland + * Author: David Jander <david@protonic.nl> + */ +/dts-v1/; + +#include "stm32mp151.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxaa-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "Protonic MECT1S"; + compatible = "prt,mect1s", "st,stm32mp151"; + + chosen { + stdout-path = "serial0:1500000n8"; + }; + + aliases { + serial0 = &uart4; + ethernet0 = ðernet0; + ethernet1 = ðernet1; + ethernet2 = ðernet2; + ethernet3 = ðernet3; + ethernet4 = ðernet4; + }; + + v3v3: regulator-v3v3 { + compatible = "regulator-fixed"; + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + v5v: regulator-v5v { + compatible = "regulator-fixed"; + regulator-name = "v5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + led { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_DEBUG; + gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; + }; + + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DEBUG; + gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&clk_hse { + clock-frequency = <24000000>; +}; + +&clk_lse { + status = "disabled"; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rmii_pins_a>; + pinctrl-1 = <ðernet0_rmii_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rmii"; + max-speed = <100>; + st,eth-clk-sel; + + fixed-link { + speed = <100>; + full-duplex; + }; + + mdio0: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; +}; + +&{ethernet0_rmii_pins_a/pins1} { + pinmux = <STM32_PINMUX('B', 12, AF11)>, /* ETH1_RMII_TXD0 */ + <STM32_PINMUX('B', 13, AF11)>, /* ETH1_RMII_TXD1 */ + <STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */ + <STM32_PINMUX('A', 2, AF11)>, /* ETH1_MDIO */ + <STM32_PINMUX('C', 1, AF11)>; /* ETH1_MDC */ +}; + +&{ethernet0_rmii_pins_a/pins2} { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH1_RMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH1_RMII_RXD1 */ + <STM32_PINMUX('A', 1, AF11)>, /* ETH1_RMII_REF_CLK input */ + <STM32_PINMUX('A', 7, AF11)>; /* ETH1_RMII_CRS_DV */ +}; + +&{ethernet0_rmii_sleep_pins_a/pins1} { + pinmux = <STM32_PINMUX('B', 12, ANALOG)>, /* ETH1_RMII_TXD0 */ + <STM32_PINMUX('B', 13, ANALOG)>, /* ETH1_RMII_TXD1 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RMII_RXD1 */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH1_RMII_REF_CLK */ + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH1_RMII_CRS_DV */ +}; + +&mdio0 { + /* All this DP83TG720R PHYs can't be probed before switch@0 is + * probed so we need to use compatible with PHYid + */ + /* TI DP83TG720R */ + t1_phy0: ethernet-phy@8 { + compatible = "ethernet-phy-id2000.a284"; + reg = <8>; + interrupts-extended = <&gpioi 5 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpioh 13 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; + + /* TI DP83TG720R */ + t1_phy1: ethernet-phy@c { + compatible = "ethernet-phy-id2000.a284"; + reg = <12>; + interrupts-extended = <&gpioj 0 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpioh 14 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; + + /* TI DP83TG720R */ + t1_phy2: ethernet-phy@4 { + compatible = "ethernet-phy-id2000.a284"; + reg = <4>; + interrupts-extended = <&gpioi 7 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpioh 15 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; + + /* TI DP83TG720R */ + t1_phy3: ethernet-phy@d { + compatible = "ethernet-phy-id2000.a284"; + reg = <13>; + interrupts-extended = <&gpioi 15 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpioi 13 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <1000>; + }; +}; + +&qspi { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi_clk_pins_a + &qspi_bk1_pins_a + &qspi_cs1_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a + &qspi_bk1_sleep_pins_a + &qspi_cs1_sleep_pins_a>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-rx-bus-width = <4>; + spi-max-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&{qspi_bk1_pins_a/pins} { + /delete-property/ bias-disable; + bias-pull-up; + drive-push-pull; + slew-rate = <1>; +}; + +&spi2 { + pinctrl-0 = <&spi2_pins_b>; + pinctrl-names = "default"; + cs-gpios = <&gpioj 3 GPIO_ACTIVE_LOW>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; + + switch@0 { + compatible = "nxp,sja1105q"; + reg = <0>; + spi-max-frequency = <1000000>; + spi-rx-delay-us = <1>; + spi-tx-delay-us = <1>; + spi-cpha; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + ethernet1: port@0 { + reg = <0>; + label = "t10"; + phy-mode = "rgmii-id"; + phy-handle = <&t1_phy0>; + }; + + ethernet2: port@1 { + reg = <1>; + label = "t11"; + phy-mode = "rgmii-id"; + phy-handle = <&t1_phy1>; + }; + + ethernet3: port@2 { + reg = <2>; + label = "t12"; + phy-mode = "rgmii-id"; + phy-handle = <&t1_phy2>; + }; + + ethernet4: port@3 { + reg = <3>; + label = "t13"; + phy-mode = "rgmii-id"; + phy-handle = <&t1_phy3>; + }; + + port@4 { + reg = <4>; + label = "cpu"; + ethernet = <ðernet0>; + phy-mode = "rmii"; + + /* RGMII mode is not working properly, using RMII instead. */ + fixed-link { + speed = <100>; + full-duplex; + }; + }; + }; + }; +}; + +&uart4 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart4_pins_a>; + pinctrl-1 = <&uart4_sleep_pins_a>; + pinctrl-2 = <&uart4_idle_pins_a>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&usbh_ehci { + status = "okay"; +}; + +&usbotg_hs { + dr_mode = "host"; + pinctrl-0 = <&usbotg_hs_pins_a>; + pinctrl-names = "default"; + phys = <&usbphyc_port1 0>; + phy-names = "usb2-phy"; + vbus-supply = <&v5v>; + status = "okay"; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&v3v3>; +}; + +&usbphyc_port1 { + phy-supply = <&v3v3>; +}; diff --git a/arch/arm/boot/dts/st/stm32mp153c-mecio1r1.dts b/arch/arm/boot/dts/st/stm32mp153c-mecio1r1.dts new file mode 100644 index 000000000000..16b814c19350 --- /dev/null +++ b/arch/arm/boot/dts/st/stm32mp153c-mecio1r1.dts @@ -0,0 +1,48 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) Protonic Holland + * Author: David Jander <david@protonic.nl> + */ +/dts-v1/; + +#include "stm32mp153.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxaa-pinctrl.dtsi" +#include "stm32mp15x-mecio1-io.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "Protonic MECIO1r1"; + compatible = "prt,mecio1r1", "st,stm32mp153"; + + led { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_DEBUG; + gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; + }; + + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DEBUG; + gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&clk_hse { + clock-frequency = <24000000>; +}; + +&m_can1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&m_can1_pins_b>; + pinctrl-1 = <&m_can1_sleep_pins_b>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/st/stm32mp15x-mecio1-io.dtsi b/arch/arm/boot/dts/st/stm32mp15x-mecio1-io.dtsi new file mode 100644 index 000000000000..915ba2526f45 --- /dev/null +++ b/arch/arm/boot/dts/st/stm32mp15x-mecio1-io.dtsi @@ -0,0 +1,527 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) Protonic Holland + * Author: David Jander <david@protonic.nl> + */ + +#include "stm32mp15xc.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxaa-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + chosen { + stdout-path = "serial0:1500000n8"; + }; + + aliases { + serial0 = &uart4; + ethernet0 = ðernet0; + spi1 = &spi1; + spi2 = &spi2; + spi3 = &spi3; + spi4 = &spi4; + spi5 = &spi5; + spi6 = &spi6; + }; + + memory@c0000000 { + device_type = "memory"; + reg = <0xC0000000 0x10000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mcuram2: mcuram2@10000000 { + compatible = "shared-dma-pool"; + reg = <0x10000000 0x40000>; + no-map; + }; + + vdev0vring0: vdev0vring0@10040000 { + compatible = "shared-dma-pool"; + reg = <0x10040000 0x1000>; + no-map; + }; + + vdev0vring1: vdev0vring1@10041000 { + compatible = "shared-dma-pool"; + reg = <0x10041000 0x1000>; + no-map; + }; + + vdev0buffer: vdev0buffer@10042000 { + compatible = "shared-dma-pool"; + reg = <0x10042000 0x4000>; + no-map; + }; + + mcuram: mcuram@30000000 { + compatible = "shared-dma-pool"; + reg = <0x30000000 0x40000>; + no-map; + }; + + retram: retram@38000000 { + compatible = "shared-dma-pool"; + reg = <0x38000000 0x10000>; + no-map; + }; + }; + + v3v3: regulator-v3v3 { + compatible = "regulator-fixed"; + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + v5v: regulator-v5v { + compatible = "regulator-fixed"; + regulator-name = "v5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; +}; + +&adc { + /* ANA0, ANA1 are dedicated pins and don't need pinctrl: only in6. */ + pinctrl-0 = <&adc12_pins_mecsbc>; + pinctrl-names = "default"; + vdd-supply = <&v3v3>; + vdda-supply = <&v3v3>; + vref-supply = <&v3v3>; + status = "okay"; +}; + +&adc1 { + status = "okay"; + + channel@0 { + reg = <0>; + /* 16.5 ck_cycles sampling time */ + st,min-sample-time-ns = <5000>; + label = "p24v_stp"; + }; + + channel@1 { + reg = <1>; + st,min-sample-time-ns = <5000>; + label = "p24v_hpdcm"; + }; + + channel@2 { + reg = <2>; + st,min-sample-time-ns = <5000>; + label = "ain0"; + }; + + channel@3 { + reg = <3>; + st,min-sample-time-ns = <5000>; + label = "hpdcm1_i2"; + }; + + channel@5 { + reg = <5>; + st,min-sample-time-ns = <5000>; + label = "hpout1_i"; + }; + + channel@6 { + reg = <6>; + st,min-sample-time-ns = <5000>; + label = "ain1"; + }; + + channel@9 { + reg = <9>; + st,min-sample-time-ns = <5000>; + label = "hpout0_i"; + }; + + channel@10 { + reg = <10>; + st,min-sample-time-ns = <5000>; + label = "phint0_ain"; + }; + + channel@13 { + reg = <13>; + st,min-sample-time-ns = <5000>; + label = "phint1_ain"; + }; + + channel@15 { + reg = <15>; + st,min-sample-time-ns = <5000>; + label = "hpdcm0_i1"; + }; + + channel@16 { + reg = <16>; + st,min-sample-time-ns = <5000>; + label = "lsin"; + }; + + channel@18 { + reg = <18>; + st,min-sample-time-ns = <5000>; + label = "hpdcm0_i2"; + }; + + channel@19 { + reg = <19>; + st,min-sample-time-ns = <5000>; + label = "hpdcm1_i1"; + }; +}; + +&adc2 { + status = "okay"; + + channel@2 { + reg = <2>; + /* 16.5 ck_cycles sampling time */ + st,min-sample-time-ns = <5000>; + label = "ain2"; + }; + + channel@6 { + reg = <6>; + st,min-sample-time-ns = <5000>; + label = "ain3"; + }; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rgmii_pins_x>; + pinctrl-1 = <ðernet0_rgmii_sleep_pins_x>; + pinctrl-names = "default", "sleep"; + phy-mode = "rgmii-id"; + max-speed = <1000>; + phy-handle = <&phy0>; + st,eth-clk-sel; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@8 { + reg = <8>; + interrupts-extended = <&gpiog 7 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpiog 10 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; + }; +}; + +&gpiod { + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "", "", "", + "STP_RESETN", "STP_ENABLEN", "HPOUT0", "HPOUT0_ALERTN"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_d_mecsbc>; +}; + +&gpioe { + gpio-line-names = "HPOUT0_RESETN", "HPOUT1", "HPOUT1_ALERTN", "", + "", "", "HPOUT1_RESETN", + "LPOUT0", "LPOUT0_ALERTN", "GPOUT0_RESETN", + "LPOUT1", "LPOUT1_ALERTN", "GPOUT1_RESETN", + "LPOUT2", "LPOUT2_ALERTN", "GPOUT2_RESETN"; +}; + +&gpiof { + gpio-line-names = "LPOUT3", "LPOUT3_ALERTN", "GPOUT3_RESETN", + "LPOUT4", "LPOUT4_ALERTN", "GPOUT4_RESETN", + "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpiog { + gpio-line-names = "LPOUT5", "LPOUT5_ALERTN", "", "LPOUT5_RESETN", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpioh { + gpio-line-names = "", "", "", "", + "", "", "", "", + "GPIO0_RESETN", "", "", "", + "", "", "", ""; +}; + +&gpioi { + gpio-line-names = "", "", "", "", + "", "", "", "", + "HPDCM0_SLEEPN", "HPDCM1_SLEEPN", "GPIO1_RESETN", "", + "", "", "", ""; +}; + +&gpioj { + gpio-line-names = "HSIN10", "HSIN11", "HSIN12", "HSIN13", + "HSIN14", "HSIN15", "", "", + "", "", "", "", + "", "RTD_RESETN", "", ""; +}; + +&gpiok { + gpio-line-names = "", "", "HSIN0", "HSIN1", + "HSIN2", "HSIN3", "HSIN4", "HSIN5"; +}; + +&gpioz { + gpio-line-names = "", "", "", "HSIN6", + "HSIN7", "HSIN8", "HSIN9", ""; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + pinctrl-1 = <&i2c2_sleep_pins_a>; + status = "okay"; + + gpio0: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "HSIN0_BIAS", "HSIN1_BIAS", "HSIN2_BIAS", "HSIN3_BIAS", + "", "", "HSIN_VREF0_LVL", "HSIN_VREF1_LVL", + "HSIN4_BIAS", "HSIN5_BIAS", "HSIN6_BIAS", "HSIN9_BIAS", + "", "", "", ""; + }; + + gpio1: gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "HSIN8_BIAS", "HSIN9_BIAS", "HSIN10_BIAS", "HSIN11_BIAS", + "", "", "HSIN_VREF2_LVL", "HSIN_VREF3_LVL", + "HSIN12_BIAS", "HSIN13_BIAS", "HSIN14_BIAS", "HSIN15_BIAS", + "", "", "LSIN8_BIAS", "LSIN9_BIAS"; + }; +}; + +&qspi { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi_clk_pins_a + &qspi_bk1_pins_a + &qspi_cs1_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a + &qspi_bk1_sleep_pins_a + &qspi_cs1_sleep_pins_a>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-rx-bus-width = <4>; + spi-max-frequency = <104000000>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&{qspi_bk1_pins_a/pins} { + pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */ + <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */ + <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */ + <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */ + /delete-property/ bias-disable; + bias-pull-up; +}; + +&timers1 { + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; + + hpdcm0_pwm: pwm { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pwm1_pins_mecio1>; + pinctrl-1 = <&pwm1_sleep_pins_mecio1>; + status = "okay"; + }; +}; + +&timers8 { + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; + + hpdcm1_pwm: pwm { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pwm8_pins_mecio1>; + pinctrl-1 = <&pwm8_sleep_pins_mecio1>; + status = "okay"; + }; +}; + +&uart4 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart4_pins_a>; + pinctrl-1 = <&uart4_sleep_pins_a>; + pinctrl-2 = <&uart4_idle_pins_a>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&{uart4_pins_a/pins1} { + pinmux = <STM32_PINMUX('B', 9, AF8)>; /* UART4_TX */ +}; + +&{uart4_pins_a/pins2} { + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ + /delete-property/ bias-disable; + bias-pull-up; +}; + +&usbotg_hs { + dr_mode = "host"; + pinctrl-0 = <&usbotg_hs_pins_a>; + pinctrl-names = "default"; + phys = <&usbphyc_port1 0>; + phy-names = "usb2-phy"; + vbus-supply = <&v5v>; + status = "okay"; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&v3v3>; +}; + +&usbphyc_port1 { + phy-supply = <&v3v3>; +}; + +&pinctrl { + adc12_pins_mecsbc: adc12-ain-mecsbc-0 { + pins { + pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* ADC1_INP2 */ + <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1_INP6 */ + <STM32_PINMUX('F', 13, ANALOG)>, /* ADC2_INP2 */ + <STM32_PINMUX('F', 14, ANALOG)>, /* ADC2_INP6 */ + <STM32_PINMUX('A', 0, ANALOG)>, /* ADC1_INP16 */ + <STM32_PINMUX('A', 3, ANALOG)>, /* ADC1_INP15 */ + <STM32_PINMUX('A', 4, ANALOG)>, /* ADC1_INP18 */ + <STM32_PINMUX('A', 5, ANALOG)>, /* ADC1_INP19 */ + <STM32_PINMUX('A', 6, ANALOG)>, /* ADC1_INP3 */ + <STM32_PINMUX('B', 0, ANALOG)>, /* ADC1_INP9 */ + <STM32_PINMUX('B', 1, ANALOG)>, /* ADC1_INP5 */ + <STM32_PINMUX('C', 0, ANALOG)>, /* ADC1_INP10 */ + <STM32_PINMUX('C', 3, ANALOG)>; /* ADC1_INP13 */ + }; + }; + + pinctrl_hog_d_mecsbc: hog-d-0 { + pins { + pinmux = <STM32_PINMUX('D', 12, GPIO)>; /* STP_RESETn */ + bias-pull-up; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm1_pins_mecio1: pwm1-mecio1-0 { + pins { + pinmux = <STM32_PINMUX('A', 8, AF1)>, /* TIM1_CH1 */ + <STM32_PINMUX('A', 8, AF1)>; /* TIM1_CH2 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm1_sleep_pins_mecio1: pwm1-sleep-mecio1-0 { + pins { + pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* TIM1_CH1 */ + <STM32_PINMUX('A', 8, ANALOG)>; /* TIM1_CH2 */ + }; + }; + + pwm8_pins_mecio1: pwm8-mecio1-0 { + pins { + pinmux = <STM32_PINMUX('I', 5, AF3)>, /* TIM8_CH1 */ + <STM32_PINMUX('I', 6, AF3)>; /* TIM8_CH2 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm8_sleep_pins_mecio1: pwm8-sleep-mecio1-0 { + pins { + pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* TIM8_CH1 */ + <STM32_PINMUX('I', 6, ANALOG)>; /* TIM8_CH2 */ + }; + }; + + ethernet0_rgmii_pins_x: rgmii-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */ + <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('B', 12, AF11)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('B', 13, AF11)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('B', 8, AF11)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + pins2 { + pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('H', 7, AF11)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */ + <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */ + bias-disable; + }; + }; + + ethernet0_rgmii_sleep_pins_x: rgmii-sleep-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */ + <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('B', 12, ANALOG)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('B', 13, ANALOG)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('B', 8, ANALOG)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */ + <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('H', 7, ANALOG)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */ + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */ + }; + }; +}; diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi index 466d9701add0..171d7c7658fa 100644 --- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi @@ -192,15 +192,11 @@ sgtl5000_tx_endpoint: endpoint@0 { reg = <0>; remote-endpoint = <&sai2a_endpoint>; - frame-master = <&sgtl5000_tx_endpoint>; - bitclock-master = <&sgtl5000_tx_endpoint>; }; sgtl5000_rx_endpoint: endpoint@1 { reg = <1>; remote-endpoint = <&sai2b_endpoint>; - frame-master = <&sgtl5000_rx_endpoint>; - bitclock-master = <&sgtl5000_rx_endpoint>; }; }; @@ -245,10 +241,12 @@ sai2a_port: port { sai2a_endpoint: endpoint { remote-endpoint = <&sgtl5000_tx_endpoint>; + bitclock-master; dai-format = "i2s"; - mclk-fs = <512>; dai-tdm-slot-num = <2>; dai-tdm-slot-width = <16>; + frame-master; + mclk-fs = <256>; }; }; }; @@ -263,10 +261,12 @@ sai2b_port: port { sai2b_endpoint: endpoint { remote-endpoint = <&sgtl5000_rx_endpoint>; + bitclock-master; dai-format = "i2s"; - mclk-fs = <512>; dai-tdm-slot-num = <2>; dai-tdm-slot-width = <16>; + frame-master; + mclk-fs = <256>; }; }; }; diff --git a/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi b/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi index 2d0216840ff5..a0fb431aec84 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi @@ -221,10 +221,14 @@ reg = <0x50>; vcc-supply = <&ldo4_reg>; - #address-cells = <1>; - #size-cells = <1>; - baseboard_data: baseboard_data@0 { - reg = <0 0x100>; + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + baseboard_data: baseboard_data@0 { + reg = <0 0x100>; + }; }; }; }; @@ -239,40 +243,60 @@ cape_eeprom0: cape_eeprom0@54 { compatible = "atmel,24c256"; reg = <0x54>; - #address-cells = <1>; - #size-cells = <1>; - cape0_data: cape_data@0 { - reg = <0 0x100>; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + cape0_data: cape_data@0 { + reg = <0 0x100>; + }; }; }; cape_eeprom1: cape_eeprom1@55 { compatible = "atmel,24c256"; reg = <0x55>; - #address-cells = <1>; - #size-cells = <1>; - cape1_data: cape_data@0 { - reg = <0 0x100>; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + cape1_data: cape_data@0 { + reg = <0 0x100>; + }; }; }; cape_eeprom2: cape_eeprom2@56 { compatible = "atmel,24c256"; reg = <0x56>; - #address-cells = <1>; - #size-cells = <1>; - cape2_data: cape_data@0 { - reg = <0 0x100>; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + cape2_data: cape_data@0 { + reg = <0 0x100>; + }; }; }; cape_eeprom3: cape_eeprom3@57 { compatible = "atmel,24c256"; reg = <0x57>; - #address-cells = <1>; - #size-cells = <1>; - cape3_data: cape_data@0 { - reg = <0 0x100>; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + cape3_data: cape_data@0 { + reg = <0 0x100>; + }; }; }; }; @@ -385,7 +409,7 @@ /* Support GPIO reset on revision C3 boards */ reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; reset-assert-us = <300>; - reset-deassert-us = <6500>; + reset-deassert-us = <13000>; }; }; diff --git a/arch/arm/boot/dts/ti/omap/am335x-boneblue.dts b/arch/arm/boot/dts/ti/omap/am335x-boneblue.dts index 801399702547..8878da773d67 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-boneblue.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-boneblue.dts @@ -317,10 +317,14 @@ compatible = "atmel,24c256"; reg = <0x50>; - #address-cells = <1>; - #size-cells = <1>; - baseboard_data: baseboard_data@0 { - reg = <0 0x100>; + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + baseboard_data: baseboard_data@0 { + reg = <0 0x100>; + }; }; }; }; diff --git a/arch/arm/boot/dts/ti/omap/am335x-nano.dts b/arch/arm/boot/dts/ti/omap/am335x-nano.dts index 26b5510cb3d1..56929059f5af 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-nano.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-nano.dts @@ -231,7 +231,7 @@ }; temperature-sensor@48 { - compatible = "lm75"; + compatible = "national,lm75"; reg = <0x48>; }; diff --git a/arch/arm/boot/dts/ti/omap/am335x-regor.dtsi b/arch/arm/boot/dts/ti/omap/am335x-regor.dtsi index 625db3bcd365..287d209a0ea9 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-regor.dtsi +++ b/arch/arm/boot/dts/ti/omap/am335x-regor.dtsi @@ -5,6 +5,9 @@ * */ +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/am33xx.h> + / { model = "Phytec AM335x phyBOARD-REGOR"; compatible = "phytec,am335x-regor", "phytec,am335x-phycore-som", "ti,am33xx"; @@ -188,7 +191,7 @@ pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; }; @@ -198,4 +201,9 @@ pinctrl-0 = <&uart1_rs485_pins>; status = "okay"; linux,rs485-enabled-at-boot-time; + /* + * un-intuitively, yet with the default (active-high), + * am335x RTS is high on idle and gets low on active ! + */ + rs485-rts-active-low; }; diff --git a/arch/arm/boot/dts/ti/omap/am335x-wega.dtsi b/arch/arm/boot/dts/ti/omap/am335x-wega.dtsi index cb27ff464dbe..d0c290d7d062 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-wega.dtsi +++ b/arch/arm/boot/dts/ti/omap/am335x-wega.dtsi @@ -14,7 +14,7 @@ simple-audio-card,format = "i2s"; simple-audio-card,bitclock-master = <&sound_iface_main>; simple-audio-card,frame-master = <&sound_iface_main>; - simple-audio-card,mclk-fs = <32>; + simple-audio-card,mclk-fs = <512>; simple-audio-card,widgets = "Line", "Line In", "Line", "Line Out", @@ -27,13 +27,12 @@ "LINE1L", "Line In", "LINE1R", "Line In"; - simple-audio-card,cpu { + sound_iface_main: simple-audio-card,cpu { sound-dai = <&mcasp0>; }; - sound_iface_main: simple-audio-card,codec { + simple-audio-card,codec { sound-dai = <&tlv320aic3007>; - clocks = <&mcasp0_fck>; }; }; diff --git a/arch/arm/boot/dts/xilinx/zynq-zturn-common.dtsi b/arch/arm/boot/dts/xilinx/zynq-zturn-common.dtsi index dfb1fbafe3aa..33b02e05ce82 100644 --- a/arch/arm/boot/dts/xilinx/zynq-zturn-common.dtsi +++ b/arch/arm/boot/dts/xilinx/zynq-zturn-common.dtsi @@ -97,9 +97,9 @@ status = "okay"; clock-frequency = <400000>; - stlm75@49 { + temperature-sensor@49 { status = "okay"; - compatible = "lm75"; + compatible = "st,stlm75"; reg = <0x49>; }; diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index 0db7b60b49a1..00bed412ee31 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -49,5 +49,6 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-orangepi-zero2w.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-orangepi-zero3.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-transpeed-8k618-t.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-2024.dtb -dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-plus.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-h.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-plus.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-sp.dtb diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index e868ca5ae753..a5c3920e0f04 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -263,6 +263,14 @@ polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&ths 1>; + + trips { + gpu0_crit: gpu0-crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; }; gpu1_thermal: gpu1-thermal { @@ -270,6 +278,14 @@ polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&ths 2>; + + trips { + gpu1_crit: gpu1-crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts index b69032c44557..526443bb736c 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts @@ -45,16 +45,40 @@ startup-delay-us = <100000>; enable-active-high; gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; + vin-supply = <®_vcc3v3>; + }; + + reg_gmac_2v5: gmac-2v5 { + /* 2V5 supply for GMAC PHY IO */ + compatible = "regulator-fixed"; + regulator-name = "gmac-2v5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + vin-supply = <®_vcc3v3>; + }; + + reg_vcc5v: regulator-vcc5v { + /* board 5V supply from micro USB or pin headers */ + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; }; reg_vcc3v3: vcc3v3 { + /* board 3V3 supply by SY8089A */ compatible = "regulator-fixed"; regulator-name = "vcc3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <®_vcc5v>; }; vdd_cpux: gpio-regulator { + /* cpu voltage regulator MP2143DJ */ compatible = "regulator-gpio"; regulator-name = "vdd-cpux"; regulator-type = "voltage"; @@ -66,6 +90,7 @@ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; gpios-states = <0x1>; states = <1100000 0>, <1300000 1>; + vin-supply = <®_vcc5v>; }; wifi_pwrseq: pwrseq { @@ -146,6 +171,18 @@ status = "okay"; }; +&pio { + vcc-pa-supply = <®_vcc3v3>; + vcc-pc-supply = <®_vcc3v3>; + vcc-pd-supply = <®_gmac_2v5>; + vcc-pf-supply = <®_vcc3v3>; + vcc-pg-supply = <®_vcc3v3>; +}; + +&r_pio { + vcc-pl-supply = <®_vcc3v3>; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pa_pins>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi index b29ce7321317..e88c1fbac6ac 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi @@ -914,6 +914,8 @@ dmas = <&dma 48>, <&dma 48>; dma-names = "rx", "tx"; resets = <&r_ccu RST_R_APB2_I2C>; + pinctrl-names = "default"; + pinctrl-0 = <&r_i2c_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts index afb49e65859f..80ccab7b5ba7 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts @@ -21,6 +21,12 @@ serial0 = &uart0; }; + battery: battery { + compatible = "simple-battery"; + constant-charge-current-max-microamp = <1024000>; + voltage-max-design-microvolt = <4200000>; + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -201,12 +207,12 @@ vcc-pi-supply = <®_cldo3>; }; -&r_rsb { +&r_i2c { status = "okay"; - axp717: pmic@3a3 { + axp717: pmic@34 { compatible = "x-powers,axp717"; - reg = <0x3a3>; + reg = <0x34>; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&nmi_intc>; @@ -217,6 +223,16 @@ vin3-supply = <®_vcc5v>; vin4-supply = <®_vcc5v>; + axp_adc: adc { + compatible = "x-powers,axp717-adc"; + #io-channel-cells = <1>; + }; + + battery_power: battery-power { + compatible = "x-powers,axp717-battery-power-supply"; + monitored-battery = <&battery>; + }; + regulators { reg_dcdc1: dcdc1 { regulator-always-on; @@ -307,6 +323,11 @@ /* unused */ }; }; + + usb_power: usb-power { + compatible = "x-powers,axp717-usb-power-supply"; + input-current-limit-microamp = <1500000>; + }; }; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-sp.dts b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-sp.dts new file mode 100644 index 000000000000..0cf16dc903cd --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-sp.dts @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Copyright (C) 2024 Ryan Walklin <ryan@testtoast.com>. + * Copyright (C) 2024 Chris Morgan <macroalpha82@gmail.com>. + */ + +#include <dt-bindings/input/gpio-keys.h> +#include "sun50i-h700-anbernic-rg35xx-plus.dts" + +/ { + model = "Anbernic RG35XX SP"; + compatible = "anbernic,rg35xx-sp", "allwinner,sun50i-h700"; + + gpio-keys-lid { + compatible = "gpio-keys"; + + lid-switch { + label = "Lid Switch"; + gpios = <&pio 4 7 GPIO_ACTIVE_LOW>; /* PE7 */ + linux,can-disable; + linux,code = <SW_LID>; + linux,input-type = <EV_SW>; + wakeup-event-action = <EV_ACT_DEASSERTED>; + wakeup-source; + }; + }; +}; + +&r_i2c { + rtc_ext: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 29417f04f886..2fbda8419c65 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -2,6 +2,7 @@ dtb-$(CONFIG_ARCH_MESON) += amlogic-a4-a113l2-ba400.dtb dtb-$(CONFIG_ARCH_MESON) += amlogic-a5-a113x2-av400.dtb dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409.dtb +dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c308l-aw419.dtb dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-an400.dtb dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-khadas-vim4.dtb dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi index b6106ad4a072..54d7a2d56ef6 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi @@ -52,6 +52,12 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>; + watchdog@2100 { + compatible = "amlogic,a4-wdt", "amlogic,t7-wdt"; + reg = <0x0 0x2100 0x0 0x10>; + clocks = <&xtal>; + }; + uart_b: serial@7a000 { compatible = "amlogic,a4-uart", "amlogic,meson-s4-uart"; @@ -61,6 +67,14 @@ clock-names = "xtal", "pclk", "baud"; status = "disabled"; }; + + sec_ao: ao-secure@10220 { + compatible = "amlogic,a4-ao-secure", + "amlogic,meson-gx-ao-secure", + "syscon"; + reg = <0x0 0x10220 0x0 0x140>; + amlogic,has-chip-id; + }; }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi index 43f68a7da2f7..17a6316de891 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi @@ -4,6 +4,7 @@ */ #include "amlogic-a4-common.dtsi" +#include <dt-bindings/power/amlogic,a5-pwrc.h> / { cpus { #address-cells = <2>; @@ -37,4 +38,13 @@ enable-method = "psci"; }; }; + + sm: secure-monitor { + compatible = "amlogic,meson-gxbb-sm"; + + pwrc: power-controller { + compatible = "amlogic,a5-pwrc"; + #power-domain-cells = <1>; + }; + }; }; diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts index edce8850b338..a6736ad2a648 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts @@ -16,14 +16,245 @@ aliases { serial0 = &uart_b; + spi0 = &spifc; }; memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x10000000>; }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* 9 MiB reserved for ARM Trusted Firmware */ + secmon_reserved: secmon@7f00000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x07f00000 0x0 0x900000>; + no-map; + }; + }; + + main_12v: regulator-main-12v { + compatible = "regulator-fixed"; + regulator-name = "12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_5v: regulator-vcc-5v { + compatible = "regulator-fixed"; + regulator-name = "VCC5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&main_12v>; + regulator-boot-on; + regulator-always-on; + }; + + vddq: regulator-vddq { + compatible = "regulator-fixed"; + regulator-name = "VDDQ"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <&main_12v>; + regulator-boot-on; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&main_12v>; + regulator-boot-on; + regulator-always-on; + }; + + vddao_1v8: regulator-vddao-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + ddr4_2v5: regulator-ddr4-2v5 { + compatible = "regulator-fixed"; + regulator-name = "DDR4_2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + vin-supply = <&vddao_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_1v8: regulator-vcc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + vdd_1v8: regulator-vdd-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDD1V8_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + vddio_b: regulator-vddio-3v3-b { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_B"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + sdcard: regulator-sdcard { + compatible = "regulator-fixed"; + regulator-name = "SDCARD_POWER"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + gpio = <&gpio GPIOA_4 GPIO_ACTIVE_LOW>; + regulator-boot-on; + regulator-always-on; + }; }; &uart_b { status = "okay"; }; + +&nand { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + nand@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + nand-on-flash-bbt; + + partition@0 { + label = "boot"; + reg = <0x0 0x00200000>; + }; + partition@200000 { + label = "env"; + reg = <0x00200000 0x00400000>; + }; + partition@600000 { + label = "system"; + reg = <0x00600000 0x00a00000>; + }; + partition@1000000 { + label = "rootfs"; + reg = <0x01000000 0x03000000>; + }; + partition@4000000 { + label = "media"; + reg = <0x04000000 0x8000000>; + }; + }; +}; + +ðmac { + status = "okay"; + phy-handle = <&internal_ephy>; + phy-mode = "rmii"; +}; + +&spifc { + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&spifc_pins>; + pinctrl-names = "default"; + + nand@0 { + compatible = "spi-nand"; + reg = <0>; + spi-max-frequency = <83000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + status = "disabled"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot"; + reg = <0 0x200000>; + }; + + partition@200000 { + label = "env"; + reg = <0x200000 0x400000>; + }; + + partition@600000 { + label = "system"; + reg = <0x600000 0xa00000>; + }; + + partition@1000000 { + label = "rootfs"; + reg = <0x1000000 0x3000000>; + }; + + partition@4000000 { + label = "data"; + reg = <0x4000000 0x8000000>; + }; + }; + }; +}; + +&sd { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default","clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&sdcard>; + vqmmc-supply = <&sdcard>; +}; diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts b/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts new file mode 100644 index 000000000000..45f8631f9feb --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts @@ -0,0 +1,260 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2024 Amlogic, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "amlogic-c3.dtsi" + +/ { + model = "Amlogic C308l aw419 Development Board"; + compatible = "amlogic,aw419", "amlogic,c3"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &uart_b; + spi0 = &spifc; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* 9 MiB reserved for ARM Trusted Firmware */ + secmon_reserved: secmon@7f00000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x07f00000 0x0 0x900000>; + no-map; + }; + }; + + main_12v: regulator-main-12v { + compatible = "regulator-fixed"; + regulator-name = "12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_5v: regulator-vcc-5v { + compatible = "regulator-fixed"; + regulator-name = "VCC5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&main_12v>; + regulator-boot-on; + regulator-always-on; + }; + + vddq: regulator-vddq { + compatible = "regulator-fixed"; + regulator-name = "VDDQ"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <&main_12v>; + regulator-boot-on; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&main_12v>; + regulator-boot-on; + regulator-always-on; + }; + + vddao_1v8: regulator-vddao-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + ddr4_2v5: regulator-ddr4-2v5 { + compatible = "regulator-fixed"; + regulator-name = "DDR4_2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + vin-supply = <&vddao_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_1v8: regulator-vcc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + vdd_1v8: regulator-vdd-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDD1V8_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + vddio_b: regulator-vddio-3v3-b { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_B"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + sdcard: regulator-sdcard { + compatible = "regulator-fixed"; + regulator-name = "SDCARD_POWER"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + gpio = <&gpio GPIOA_4 GPIO_ACTIVE_LOW>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&uart_b { + status = "okay"; +}; + +&nand { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + nand@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + nand-on-flash-bbt; + + partition@0 { + label = "boot"; + reg = <0x0 0x00200000>; + }; + partition@200000 { + label = "env"; + reg = <0x00200000 0x00400000>; + }; + partition@600000 { + label = "system"; + reg = <0x00600000 0x00a00000>; + }; + partition@1000000 { + label = "rootfs"; + reg = <0x01000000 0x03000000>; + }; + partition@4000000 { + label = "media"; + reg = <0x04000000 0x8000000>; + }; + }; +}; + +ðmac { + status = "okay"; + phy-handle = <&internal_ephy>; + phy-mode = "rmii"; +}; + +&spifc { + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&spifc_pins>; + pinctrl-names = "default"; + + nand@0 { + compatible = "spi-nand"; + reg = <0>; + spi-max-frequency = <83000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + status = "disabled"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot"; + reg = <0 0x200000>; + }; + + partition@200000 { + label = "env"; + reg = <0x200000 0x400000>; + }; + + partition@600000 { + label = "system"; + reg = <0x600000 0xa00000>; + }; + + partition@1000000 { + label = "rootfs"; + reg = <0x1000000 0x3000000>; + }; + + partition@4000000 { + label = "data"; + reg = <0x4000000 0x8000000>; + }; + }; + }; +}; + +&sd { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default","clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&sdcard>; + vqmmc-supply = <&sdcard>; +}; diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi index f8fb060c49ae..d0cda759c25d 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi @@ -7,6 +7,11 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/reset/amlogic,c3-reset.h> +#include <dt-bindings/clock/amlogic,c3-pll-clkc.h> +#include <dt-bindings/clock/amlogic,c3-scmi-clkc.h> +#include <dt-bindings/clock/amlogic,c3-peripherals-clkc.h> +#include <dt-bindings/power/amlogic,c3-pwrc.h> +#include <dt-bindings/gpio/amlogic-c3-gpio.h> / { cpus { @@ -57,6 +62,34 @@ }; }; + sram@7f50e00 { + compatible = "mmio-sram"; + reg = <0x0 0x07f50e00 0x0 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x07f50e00 0x100>; + + scmi_shmem: sram@0 { + compatible = "arm,scmi-shmem"; + reg = <0x0 0x100>; + }; + }; + + firmware { + scmi: scmi { + compatible = "arm,scmi-smc"; + arm,smc-id = <0x820000C1>; + shmem = <&scmi_shmem>; + #address-cells = <1>; + #size-cells = <0>; + + scmi_clk: protocol@14 { + reg = <0x14>; + #clock-cells = <1>; + }; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; @@ -82,6 +115,44 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>; + clkc_periphs: clock-controller@0 { + compatible = "amlogic,c3-peripherals-clkc"; + reg = <0x0 0x0 0x0 0x49c>; + #clock-cells = <1>; + clocks = <&xtal>, + <&scmi_clk CLKID_OSC>, + <&scmi_clk CLKID_FIXED_PLL_OSC>, + <&clkc_pll CLKID_FCLK_DIV2>, + <&clkc_pll CLKID_FCLK_DIV2P5>, + <&clkc_pll CLKID_FCLK_DIV3>, + <&clkc_pll CLKID_FCLK_DIV4>, + <&clkc_pll CLKID_FCLK_DIV5>, + <&clkc_pll CLKID_FCLK_DIV7>, + <&clkc_pll CLKID_GP0_PLL>, + <&scmi_clk CLKID_GP1_PLL_OSC>, + <&clkc_pll CLKID_HIFI_PLL>, + <&scmi_clk CLKID_SYS_CLK>, + <&scmi_clk CLKID_AXI_CLK>, + <&scmi_clk CLKID_SYS_PLL_DIV16>, + <&scmi_clk CLKID_CPU_CLK_DIV16>; + clock-names = "xtal_24m", + "oscin", + "fix", + "fdiv2", + "fdiv2p5", + "fdiv3", + "fdiv4", + "fdiv5", + "fdiv7", + "gp0", + "gp1", + "hifi", + "sysclk", + "axiclk", + "sysplldiv16", + "cpudiv16"; + }; + reset: reset-controller@2000 { compatible = "amlogic,c3-reset"; reg = <0x0 0x2000 0x0 0x98>; @@ -98,16 +169,247 @@ compatible = "amlogic,c3-periphs-pinctrl"; #address-cells = <2>; #size-cells = <2>; - ranges; + ranges = <0x0 0x0 0x0 0x4000 0x0 0x02de>; - gpio: bank@4000 { - reg = <0x0 0x4000 0x0 0x004c>, - <0x0 0x4100 0x0 0x01de>; + gpio: bank@0 { + reg = <0x0 0x0 0x0 0x004c>, + <0x0 0x100 0x0 0x01de>; reg-names = "mux", "gpio"; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&periphs_pinctrl 0 0 55>; }; + + i2c0_pins1: i2c0-pins1 { + mux { + groups = "i2c0_sda_e", + "i2c0_scl_e"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c0_pins2: i2c0-pins2 { + mux { + groups = "i2c0_sda_d", + "i2c0_scl_d"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_pins1: i2c1-pins1 { + mux { + groups = "i2c1_sda_x", + "i2c1_scl_x"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_pins2: i2c1-pins2 { + mux { + groups = "i2c1_sda_d", + "i2c1_scl_d"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_pins3: i2c1-pins3 { + mux { + groups = "i2c1_sda_a", + "i2c1_scl_a"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_pins4: i2c1-pins4 { + mux { + groups = "i2c1_sda_b", + "i2c1_scl_b"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_pins1: i2c2-pins1 { + mux { + groups = "i2c2_sda", + "i2c2_scl"; + function = "i2c2"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_pins1: i2c3-pins1 { + mux { + groups = "i2c3_sda_c", + "i2c3_scl_c"; + function = "i2c3"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_pins2: i2c3-pins2 { + mux { + groups = "i2c3_sda_x", + "i2c3_scl_x"; + function = "i2c3"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_pins3: i2c3-pins3 { + mux { + groups = "i2c3_sda_d", + "i2c3_scl_d"; + function = "i2c3"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + nand_pins: nand-pins { + mux { + groups = "emmc_nand_d0", + "emmc_nand_d1", + "emmc_nand_d2", + "emmc_nand_d3", + "emmc_nand_d4", + "emmc_nand_d5", + "emmc_nand_d6", + "emmc_nand_d7", + "nand_ce0", + "nand_ale", + "nand_cle", + "nand_wen_clk", + "nand_ren_wr"; + function = "nand"; + input-enable; + }; + }; + + sdcard_pins: sdcard-pins { + mux { + groups = "sdcard_d0", + "sdcard_d1", + "sdcard_d2", + "sdcard_d3", + "sdcard_clk", + "sdcard_cmd"; + function = "sdcard"; + bias-pull-up; + drive-strength-microamp = <4000>; + }; + }; + + sdcard_clk_gate_pins: sdcard-clk-cmd-pins { + mux { + groups = "GPIOC_4"; + function = "gpio_periphs"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + + sdio_m_clk_gate_pins: sdio-m-clk-cmd-pins { + mux { + groups = "sdio_clk"; + function = "sdio"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + + sdio_m_pins: sdio-m-all-pins { + mux { + groups = "sdio_d0", + "sdio_d1", + "sdio_d2", + "sdio_d3", + "sdio_clk", + "sdio_cmd"; + function = "sdio"; + input-enable; + bias-pull-up; + drive-strength-microamp = <4000>; + }; + }; + + spicc0_pins1: spicc0-pins1 { + mux { + groups = "spi_a_mosi_b", + "spi_a_miso_b", + "spi_a_clk_b"; + function = "spi_a"; + drive-strength-microamp = <3000>; + }; + }; + + spicc0_pins2: spicc0-pins2 { + mux { + groups = "spi_a_mosi_c", + "spi_a_miso_c", + "spi_a_clk_c"; + function = "spi_a"; + drive-strength-microamp = <3000>; + }; + }; + + spicc0_pins3: spicc0-pins3 { + mux { + groups = "spi_a_mosi_x", + "spi_a_miso_x", + "spi_a_clk_x"; + function = "spi_a"; + drive-strength-microamp = <3000>; + }; + }; + + spicc1_pins1: spicc1-pins1 { + mux { + groups = "spi_b_mosi_d", + "spi_b_miso_d", + "spi_b_clk_d"; + function = "spi_b"; + drive-strength-microamp = <3000>; + }; + }; + + spicc1_pins2: spicc1-pins2 { + mux { + groups = "spi_b_mosi_x", + "spi_b_miso_x", + "spi_b_clk_x"; + function = "spi_b"; + drive-strength-microamp = <3000>; + }; + }; + + spifc_pins: spifc-pins { + mux { + groups = "spif_mo", + "spif_mi", + "spif_clk", + "spif_cs", + "spif_hold", + "spif_wp", + "spif_clk_loop"; + function = "spif"; + drive-strength-microamp = <4000>; + }; + }; }; gpio_intc: interrupt-controller@4080 { @@ -119,16 +421,207 @@ <10 11 12 13 14 15 16 17 18 19 20 21>; }; + clkc_pll: clock-controller@8000 { + compatible = "amlogic,c3-pll-clkc"; + reg = <0x0 0x8000 0x0 0x1a4>; + #clock-cells = <1>; + clocks = <&scmi_clk CLKID_TOP_PLL_OSC>, + <&scmi_clk CLKID_MCLK_PLL_OSC>, + <&scmi_clk CLKID_FIXED_PLL_OSC>; + clock-names = "top", + "mclk", + "fix"; + }; + + eth_phy: mdio-multiplexer@28000 { + compatible = "amlogic,g12a-mdio-mux"; + reg = <0x0 0x28000 0x0 0xa4>; + + clocks = <&clkc_periphs CLKID_SYS_ETH_PHY>, + <&xtal>, + <&clkc_pll CLKID_FCLK_50M>; + clock-names = "pclk", "clkin0", "clkin1"; + mdio-parent-bus = <&mdio0>; + #address-cells = <1>; + #size-cells = <0>; + + ext_mdio: mdio@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + int_mdio: mdio@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + internal_ephy: ethernet_phy@8 { + compatible = "ethernet-phy-id0180.3301", + "ethernet-phy-ieee802.3-c22"; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + reg = <8>; + max-speed = <100>; + }; + }; + }; + + spicc0: spi@50000 { + compatible = "amlogic,meson-g12a-spicc"; + reg = <0x0 0x50000 0x0 0x44>; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc_periphs CLKID_SYS_SPICC_0>, + <&clkc_periphs CLKID_SPICC_A>; + clock-names = "core", "pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spicc1: spi@52000 { + compatible = "amlogic,meson-g12a-spicc"; + reg = <0x0 0x52000 0x0 0x44>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc_periphs CLKID_SYS_SPICC_1>, + <&clkc_periphs CLKID_SPICC_B>; + clock-names = "core", "pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spifc: spi@56000 { + compatible = "amlogic,a1-spifc"; + reg = <0x0 0x56000 0x0 0x290>; + interrupts = <GIC_SPI 182 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_periphs CLKID_SPIFC>; + clock-names = "core"; + status = "disabled"; + }; + + i2c0: i2c@66000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x66000 0x0 0x24>; + interrupts = <GIC_SPI 160 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc_periphs CLKID_SYS_I2C_M_A>; + status = "disabled"; + }; + + i2c1: i2c@68000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x68000 0x0 0x24>; + interrupts = <GIC_SPI 161 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc_periphs CLKID_SYS_I2C_M_B>; + status = "disabled"; + }; + + i2c2: i2c@6a000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x6a000 0x0 0x24>; + interrupts = <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc_periphs CLKID_SYS_I2C_M_C>; + status = "disabled"; + }; + + i2c3: i2c@6c000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x6c000 0x0 0x24>; + interrupts = <GIC_SPI 163 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc_periphs CLKID_SYS_I2C_M_D>; + status = "disabled"; + }; + uart_b: serial@7a000 { compatible = "amlogic,meson-s4-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x7a000 0x0 0x18>; interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>; status = "disabled"; - clocks = <&xtal>, <&xtal>, <&xtal>; + clocks = <&xtal>, <&clkc_periphs CLKID_SYS_UART_B>, <&xtal>; clock-names = "xtal", "pclk", "baud"; }; + sec_ao: ao-secure@10220 { + compatible = "amlogic,c3-ao-secure", + "amlogic,meson-gx-ao-secure", + "syscon"; + reg = <0x0 0x10220 0x0 0x140>; + amlogic,has-chip-id; + }; + + sdio: mmc@88000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0x88000 0x0 0x800>; + interrupts = <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>; + power-domains = <&pwrc PWRC_C3_SDIOA_ID>; + clocks = <&clkc_periphs CLKID_SYS_SD_EMMC_A>, + <&clkc_periphs CLKID_SD_EMMC_A>, + <&clkc_pll CLKID_FCLK_DIV2>; + clock-names = "core","clkin0", "clkin1"; + no-mmc; + no-sd; + resets = <&reset RESET_SD_EMMC_A>; + status = "disabled"; + }; + + sd: mmc@8a000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0x8a000 0x0 0x800>; + interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>; + power-domains = <&pwrc PWRC_C3_SDCARD_ID>; + clocks = <&clkc_periphs CLKID_SYS_SD_EMMC_B>, + <&clkc_periphs CLKID_SD_EMMC_B>, + <&clkc_pll CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + no-mmc; + no-sdio; + resets = <&reset RESET_SD_EMMC_B>; + status = "disabled"; + }; + + nand: nand-controller@8d000 { + compatible = "amlogic,meson-axg-nfc"; + reg = <0x0 0x8d000 0x0 0x200>, + <0x0 0x8C000 0x0 0x4>; + reg-names = "nfc", "emmc"; + interrupts = <GIC_SPI 87 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_periphs CLKID_SYS_SD_EMMC_C>, + <&clkc_pll CLKID_FCLK_DIV2>; + clock-names = "core", "device"; + status = "disabled"; + }; + }; + + ethmac: ethernet@fdc00000 { + compatible = "amlogic,meson-g12a-dwmac", + "snps,dwmac-3.70a", + "snps,dwmac"; + reg = <0x0 0xfdc00000 0x0 0x10000>, + <0x0 0xfe024000 0x0 0x8>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + power-domains = <&pwrc PWRC_C3_ETH_ID>; + clocks = <&clkc_periphs CLKID_SYS_ETH_MAC>, + <&clkc_pll CLKID_FCLK_DIV2>, + <&clkc_pll CLKID_FCLK_50M>; + clock-names = "stmmaceth", "clkin0", "clkin1"; + rx-fifo-depth = <4096>; + tx-fifo-depth = <2048>; + status = "disabled"; + + mdio0: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi index c23efc6c7ac0..ec743cad57db 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi @@ -194,6 +194,14 @@ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; status = "disabled"; }; + + sec_ao: ao-secure@10220 { + compatible = "amlogic,t7-ao-secure", + "amlogic,meson-gx-ao-secure", + "syscon"; + reg = <0x0 0x10220 0x0 0x140>; + amlogic,has-chip-id; + }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts index 7ed526f45175..9611775b81ee 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts @@ -268,6 +268,10 @@ "Speaker1 Right", "SPK1 OUT_D", "Linein AINL", "Linein", "Linein AINR", "Linein"; + clocks = <&clkc CLKID_HIFI_PLL>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_HIFI_PLL>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts index af211d8f3952..a457b3f4397b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts @@ -176,6 +176,10 @@ "SPDIFOUT_A IN 1", "FRDDR_B OUT 3", "SPDIFOUT_A IN 2", "FRDDR_C OUT 3"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts index 15b9bc280706..c779a5da7d1e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts @@ -138,6 +138,10 @@ "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts index 61cb8135a392..ea51341f031b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts @@ -201,6 +201,10 @@ "TODDR_B IN 1", "TDMIN_B OUT", "TODDR_C IN 1", "TDMIN_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts index 0e239939ade6..f70a46967e2b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts @@ -238,6 +238,10 @@ "Lineout", "10U2 OUTL", "Lineout", "10U2 OUTR"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts index 05c7a1e3f1b7..32f98a192494 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts @@ -158,6 +158,10 @@ "SPDIFOUT_A IN 1", "FRDDR_B OUT 3", "SPDIFOUT_A IN 2", "FRDDR_C OUT 3"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts index 13d478f9c891..2d74456e685d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts @@ -70,6 +70,10 @@ "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts index 003efed529ba..0f48c32bec97 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts @@ -79,6 +79,10 @@ "LINPUT1", "Mic Jack", "Mic Jack", "MICB"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi index 6a346cb86a53..d4e1990b5f26 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi @@ -194,6 +194,10 @@ "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi index 3a24c2411552..de35fa2d7a6d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi @@ -38,6 +38,12 @@ "SPDIFOUT_A IN 0", "FRDDR_A OUT 3", "SPDIFOUT_A IN 1", "FRDDR_B OUT 3", "SPDIFOUT_A IN 2", "FRDDR_C OUT 3"; + + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts index bb73e10b5e74..369c5cf889b6 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts @@ -48,6 +48,10 @@ "TDMOUT_A IN 2", "FRDDR_C OUT 1", "TDM_A Playback", "TDMOUT_A OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts index 6eeedd54ab91..654449afd3a4 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts @@ -49,6 +49,10 @@ "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts index 0da386cabe1a..e20311386745 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts @@ -37,6 +37,10 @@ "SPDIFOUT_A IN 1", "FRDDR_B OUT 3", "SPDIFOUT_A IN 2", "FRDDR_C OUT 3"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts index eed2a23047ca..e21831dfceee 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts @@ -234,6 +234,10 @@ "Internal Speakers", "Speaker Amplifier OUTL", "Internal Speakers", "Speaker Amplifier OUTR"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi index 86eb81112232..3bca8023638d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi @@ -95,6 +95,10 @@ "Lineout", "U19 OUTL", "Lineout", "U19 OUTR"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts index e26f3e3258e1..1b9097a30251 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts @@ -39,6 +39,10 @@ "TODDR_B IN 6", "TDMIN_LB OUT", "TODDR_C IN 6", "TDMIN_LB OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts index 8445701100d0..39feba7f2d08 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts @@ -176,6 +176,10 @@ "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts index 6396f190d703..4c1a75b926ee 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts @@ -32,6 +32,10 @@ "SPDIFOUT_A IN 1", "FRDDR_B OUT 3", "SPDIFOUT_A IN 2", "FRDDR_C OUT 3"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi index efd662a452e8..d38c3a224fbe 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi @@ -194,6 +194,10 @@ "AU2 INR", "ACODEC LORN", "7J4-14 LEFT", "AU2 OUTL", "7J4-11 RIGHT", "AU2 OUTR"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi index 08d6b69ba469..45ccddd1aaf0 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi @@ -129,6 +129,10 @@ "AU2 INR", "ACODEC LORN", "Lineout", "AU2 OUTL", "Lineout", "AU2 OUTR"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts index f28452b9f00f..073b47ce8c3c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts @@ -45,6 +45,10 @@ sound { compatible = "amlogic,gx-sound-card"; model = "KII-PRO"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts index 1fd2e56e6b08..cf2e2ef81680 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts @@ -135,6 +135,10 @@ sound { compatible = "amlogic,gx-sound-card"; model = "NANOPI-K2"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts index cca129ce2c58..7d7dde93fff3 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts @@ -142,6 +142,10 @@ sound { compatible = "amlogic,gx-sound-card"; model = "NEXBOX-A95X"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index c37cc6b036cd..959bd8d77a82 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -177,6 +177,10 @@ sound { compatible = "amlogic,gx-sound-card"; model = "ODROID-C2"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts index 7f94716876d3..bfac00e76ba3 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts @@ -68,6 +68,10 @@ sound { compatible = "amlogic,gx-sound-card"; model = "P200"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts index 6f81eed83bec..c10f66031ecd 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts @@ -17,6 +17,10 @@ sound { compatible = "amlogic,gx-sound-card"; model = "P201"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi index 255e93a0b36d..3807a184810b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi @@ -108,6 +108,10 @@ sound { compatible = "amlogic,gx-sound-card"; model = "VEGA-S95"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts index af9ea32a2876..ec281a9e9e77 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts @@ -16,6 +16,10 @@ sound { compatible = "amlogic,gx-sound-card"; model = "WETEK-HUB"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts index 376760d86766..924414861b72 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts @@ -48,6 +48,10 @@ sound { compatible = "amlogic,gx-sound-card"; model = "WETEK-PLAY2"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts index 90ef9c17d80b..c6132fb71dfc 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts @@ -123,6 +123,10 @@ "Speaker", "9J5-2 RIGHT"; audio-routing = "9J5-3 LEFT", "ACODEC LOLN", "9J5-2 RIGHT", "ACODEC LORN"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts index 08a4718219b1..c5e2306ad7a4 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts @@ -128,6 +128,10 @@ "AU2 INR", "ACODEC LORN", "Lineout", "AU2 OUTL", "Lineout", "AU2 OUTR"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts index fea65f20523a..a80f0ea2773b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts @@ -67,6 +67,10 @@ sound { compatible = "amlogic,gx-sound-card"; model = "KHADAS-VIM"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts index 63b20860067c..6cbdfde00e12 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts @@ -160,6 +160,10 @@ sound { compatible = "amlogic,gx-sound-card"; model = "LIBRETECH-CC-V2"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts index 8b26c9661be1..401064b0428d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -142,6 +142,10 @@ "AU2 INR", "ACODEC LORN", "Lineout", "AU2 OUTL", "Lineout", "AU2 OUTR"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts index 9b4ea6a49398..8b41e340f919 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts @@ -50,6 +50,10 @@ "AU2 INR", "ACODEC LORN", "Lineout", "AU2 OUTL", "Lineout", "AU2 OUTR"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-vero4k.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-vero4k.dts index de996e930b82..a9c5881c9783 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-vero4k.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-vero4k.dts @@ -90,6 +90,11 @@ "AU2 INR", "ACODEC LORN", "Lineout", "AU2 OUTL", "Lineout", "AU2 OUTR"; + + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxlx-s905l-p271.dts b/arch/arm64/boot/dts/amlogic/meson-gxlx-s905l-p271.dts index 1221f4545130..942df754a0ed 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxlx-s905l-p271.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxlx-s905l-p271.dts @@ -38,10 +38,6 @@ }; }; -&saradc { - compatible = "amlogic,meson-gxlx-saradc", "amlogic,meson-saradc"; -}; - &usb { dr_mode = "host"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts index 07e7c3bedea0..96a3dd2d8a99 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts @@ -150,6 +150,10 @@ sound { compatible = "amlogic,gx-sound-card"; model = "KHADAS-VIM2"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts index ad2dd4ad0a31..773107cc47dd 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts @@ -86,6 +86,10 @@ sound { compatible = "amlogic,gx-sound-card"; model = "NEXBOX-A1"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts index d05dde8da5c5..7356d3b628b1 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts @@ -101,6 +101,10 @@ sound { compatible = "amlogic,gx-sound-card"; model = "RBOX-PRO"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi index e78cc9b577a0..7daa9b122d5c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi @@ -182,6 +182,10 @@ "TODDR_B IN 0", "TDMIN_A OUT", "TODDR_C IN 0", "TDMIN_A OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi b/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi index 082b72703cdf..929e4720ae76 100644 --- a/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi @@ -200,6 +200,10 @@ <&tdmin_a>, <&tdmin_b>, <&tdmin_c>, <&dioo2133>; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts index 983caddc409c..6730c44642d2 100644 --- a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts +++ b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts @@ -34,6 +34,111 @@ no-map; }; }; + + sdio_32k: sdio-32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&sdio_32k>; + clock-names = "ext_clock"; + }; + + main_12v: regulator-main-12v { + compatible = "regulator-fixed"; + regulator-name = "12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&main_12v>; + regulator-always-on; + }; + + vddio_ao1v8: regulator-vddio-ao1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + /* SY8120B1ABC DC/DC Regulator. */ + vddcpu: regulator-vddcpu { + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU"; + regulator-min-microvolt = <689000>; + regulator-max-microvolt = <1049000>; + + vin-supply = <&main_12v>; + + pwms = <&pwm_ij 1 1500 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + /* Voltage Duty-Cycle */ + voltage-table = <1049000 0>, + <1039000 3>, + <1029000 6>, + <1019000 9>, + <1009000 12>, + <999000 14>, + <989000 17>, + <979000 20>, + <969000 23>, + <959000 26>, + <949000 29>, + <939000 31>, + <929000 34>, + <919000 37>, + <909000 40>, + <899000 43>, + <889000 45>, + <879000 48>, + <869000 51>, + <859000 54>, + <849000 56>, + <839000 59>, + <829000 62>, + <819000 65>, + <809000 68>, + <799000 70>, + <789000 73>, + <779000 76>, + <769000 79>, + <759000 81>, + <749000 84>, + <739000 87>, + <729000 89>, + <719000 92>, + <709000 95>, + <699000 98>, + <689000 100>; + }; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins1>; + pinctrl-names = "default"; +}; + +&pwm_ij { + status = "okay"; }; &uart_b { @@ -46,6 +151,40 @@ pinctrl-names = "default"; }; +&sdio { + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr50; + sd-uhs-sdr104; + max-frequency = <200000000>; + non-removable; + disable-wp; + no-sd; + no-mmc; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_ao1v8>; +}; + +&sd { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <200000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_3v3>; +}; + &nand { status = "okay"; #address-cells = <1>; @@ -90,3 +229,9 @@ pinctrl-0 = <&spicc0_pins_x>; cs-gpios = <&gpio GPIOX_10 GPIO_ACTIVE_LOW>; }; + +ðmac { + status = "okay"; + phy-handle = <&internal_ephy>; + phy-mode = "rmii"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi index b686eacb9662..957577d986c0 100644 --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi @@ -10,6 +10,7 @@ #include <dt-bindings/clock/amlogic,s4-pll-clkc.h> #include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> #include <dt-bindings/power/meson-s4-power.h> +#include <dt-bindings/reset/amlogic,meson-s4-reset.h> / { cpus { @@ -466,6 +467,93 @@ }; }; + sdcard_pins: sdcard-pins { + mux { + groups = "sdcard_d0_c", + "sdcard_d1_c", + "sdcard_d2_c", + "sdcard_d3_c", + "sdcard_clk_c", + "sdcard_cmd_c"; + function = "sdcard"; + bias-pull-up; + drive-strength-microamp = <4000>; + }; + }; + + sdcard_clk_gate_pins: sdcard-clk-gate-pins { + mux { + groups = "GPIOC_4"; + function = "gpio_periphs"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + + emmc_pins: emmc-pins { + mux-0 { + groups = "emmc_nand_d0", + "emmc_nand_d1", + "emmc_nand_d2", + "emmc_nand_d3", + "emmc_nand_d4", + "emmc_nand_d5", + "emmc_nand_d6", + "emmc_nand_d7", + "emmc_cmd"; + function = "emmc"; + bias-pull-up; + drive-strength-microamp = <4000>; + }; + mux-1 { + groups = "emmc_clk"; + function = "emmc"; + bias-pull-up; + drive-strength-microamp = <4000>; + }; + }; + + emmc_ds_pins: emmc-ds-pins { + mux { + groups = "emmc_nand_ds"; + function = "emmc"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + + emmc_clk_gate_pins: emmc-clk-gate-pins { + mux { + groups = "GPIOB_8"; + function = "gpio_periphs"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + + sdio_pins: sdio-pins { + mux { + groups = "sdio_d0", + "sdio_d1", + "sdio_d2", + "sdio_d3", + "sdio_clk", + "sdio_cmd"; + function = "sdio"; + bias-pull-up; + drive-strength-microamp = <4000>; + }; + }; + + sdio_clk_gate_pins: sdio-clk-gate-pins { + mux { + groups = "GPIOX_4"; + function = "gpio_periphs"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + spicc0_pins_x: spicc0-pins_x { mux { groups = "spi_a_mosi_x", @@ -675,6 +763,14 @@ #reset-cells = <1>; }; + sec_ao: ao-secure@10220 { + compatible = "amlogic,s4-ao-secure", + "amlogic,meson-gx-ao-secure", + "syscon"; + reg = <0x0 0x10220 0x0 0x140>; + amlogic,has-chip-id; + }; + ir: ir@84040 { compatible = "amlogic,meson-s4-ir"; reg = <0x0 0x84040 0x0 0x30>; @@ -712,5 +808,45 @@ compatible = "snps,dwmac-mdio"; }; }; + + sdio: mmc@fe088000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0xfe088000 0x0 0x800>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc_periphs CLKID_SDEMMC_A>, + <&xtal>, + <&clkc_pll CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_A>; + cap-sdio-irq; + keep-power-in-suspend; + status = "disabled"; + }; + + sd: mmc@fe08a000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0xfe08a000 0x0 0x800>; + interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_periphs CLKID_SDEMMC_B>, + <&clkc_periphs CLKID_SD_EMMC_B>, + <&clkc_pll CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_B>; + status = "disabled"; + }; + + emmc: mmc@fe08c000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0xfe08c000 0x0 0x800>; + interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_periphs CLKID_NAND>, + <&xtal>, + <&clkc_pll CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_NAND_EMMC>; + no-sdio; + no-sd; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts index 9b2eb6e42651..3c43d3490e14 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts @@ -22,6 +22,10 @@ "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts index 6e34fd80ed71..445c1671ede7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts @@ -22,6 +22,10 @@ "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts index 586034316ec3..eeaff22edade 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts @@ -22,6 +22,10 @@ "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts index f045bf851638..697855fec476 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts @@ -57,6 +57,10 @@ "Lineout", "ACODEC LOLP", "Lineout", "ACODEC LORP"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts index e6e9410d40cb..7b3a014d4cde 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts @@ -22,6 +22,10 @@ "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi index 951eb8e3f0c0..7b0e9817a615 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi @@ -174,6 +174,10 @@ "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts index 3581e14cbf18..2e3397e55da2 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts @@ -239,6 +239,10 @@ "TODDR_B IN 1", "TDMIN_B OUT", "TODDR_C IN 1", "TDMIN_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts index fc9b961133cd..e4a3a2a8ad06 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts @@ -22,6 +22,10 @@ "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts index 9ea969255b4f..fff92e0d6dd5 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts @@ -22,6 +22,10 @@ "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi index 532401bc9c66..6ad4703925dc 100644 --- a/arch/arm64/boot/dts/apm/apm-storm.dtsi +++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi @@ -997,7 +997,7 @@ compatible = "apm,xgene-mdio"; #address-cells = <1>; #size-cells = <0>; - menetphy: menetphy@3 { + menetphy: ethernet-phy@3 { compatible = "ethernet-phy-id001c.c915"; reg = <0x3>; }; diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dtsi b/arch/arm64/boot/dts/arm/foundation-v8.dtsi index 93f1e7c026b8..083be35495b3 100644 --- a/arch/arm64/boot/dts/arm/foundation-v8.dtsi +++ b/arch/arm64/boot/dts/arm/foundation-v8.dtsi @@ -18,7 +18,9 @@ #address-cells = <2>; #size-cells = <2>; - chosen { }; + chosen { + stdout-path = "serial0:115200n8"; + }; aliases { serial0 = &v2m_serial0; diff --git a/arch/arm64/boot/dts/arm/fvp-base-revc.dts b/arch/arm64/boot/dts/arm/fvp-base-revc.dts index 85f1c15cc65d..19973ab4ea6b 100644 --- a/arch/arm64/boot/dts/arm/fvp-base-revc.dts +++ b/arch/arm64/boot/dts/arm/fvp-base-revc.dts @@ -24,7 +24,9 @@ #address-cells = <2>; #size-cells = <2>; - chosen { }; + chosen { + stdout-path = "serial0:115200n8"; + }; aliases { serial0 = &v2m_serial0; diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts index afdf954206f1..7f7226711d4b 100644 --- a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts +++ b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts @@ -23,7 +23,9 @@ #address-cells = <2>; #size-cells = <2>; - chosen { }; + chosen { + stdout-path = "serial0:115200n8"; + }; aliases { serial0 = &v2m_serial0; diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile index 8b4591ddd27c..92565e9781ad 100644 --- a/arch/arm64/boot/dts/broadcom/Makefile +++ b/arch/arm64/boot/dts/broadcom/Makefile @@ -6,6 +6,7 @@ DTC_FLAGS := -@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \ bcm2711-rpi-4-b.dtb \ bcm2711-rpi-cm4-io.dtb \ + bcm2712-rpi-5-b.dtb \ bcm2837-rpi-3-a-plus.dtb \ bcm2837-rpi-3-b.dtb \ bcm2837-rpi-3-b-plus.dtb \ diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts new file mode 100644 index 000000000000..2bdbb6780242 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "bcm2712.dtsi" + +/ { + compatible = "raspberrypi,5-model-b", "brcm,bcm2712"; + model = "Raspberry Pi 5"; + + aliases { + serial10 = &uart10; + }; + + chosen: chosen { + stdout-path = "serial10:115200n8"; + }; + + /* Will be filled by the bootloader */ + memory@0 { + device_type = "memory"; + reg = <0 0 0 0x28000000>; + }; + + sd_io_1v8_reg: sd-io-1v8-reg { + compatible = "regulator-gpio"; + regulator-name = "vdd-sd-io"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-settling-time-us = <5000>; + gpios = <&gio_aon 3 GPIO_ACTIVE_HIGH>; + states = <1800000 1>, + <3300000 0>; + }; + + sd_vcc_reg: sd-vcc-reg { + compatible = "regulator-fixed"; + regulator-name = "vcc-sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpios = <&gio_aon 4 GPIO_ACTIVE_HIGH>; + }; +}; + +/* The Debug UART, on Rpi5 it's on JST-SH 1.0mm 3-pin connector + * labeled "UART", i.e. the interface with the system console. + */ +&uart10 { + status = "okay"; +}; + +/* SDIO1 is used to drive the SD card */ +&sdio1 { + vqmmc-supply = <&sd_io_1v8_reg>; + vmmc-supply = <&sd_vcc_reg>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-ddr50; + sd-uhs-sdr104; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi new file mode 100644 index 000000000000..6e5a984c1d4e --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi @@ -0,0 +1,283 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "brcm,bcm2712"; + + #address-cells = <2>; + #size-cells = <2>; + + interrupt-parent = <&gicv2>; + + clocks { + /* The oscillator is the root of the clock tree. */ + clk_osc: clk-osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "osc"; + clock-frequency = <54000000>; + }; + + clk_vpu: clk-vpu { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <750000000>; + clock-output-names = "vpu-clock"; + }; + + clk_uart: clk-uart { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <9216000>; + clock-output-names = "uart-clock"; + }; + + clk_emmc2: clk-emmc2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + clock-output-names = "emmc2-clock"; + }; + }; + + cpus: cpus { + #address-cells = <1>; + #size-cells = <0>; + + /* Source for L1 d/i cache-line-size, cache-sets, cache-size + * https://developer.arm.com/documentation/100798/0401/L1-memory-system/About-the-L1-memory-system?lang=en + * Source for L2 cache-line-size and cache-sets: + * https://developer.arm.com/documentation/100798/0401/L2-memory-system/About-the-L2-memory-system?lang=en + * and for cache-size: + * https://www.raspberrypi.com/documentation/computers/processors.html#bcm2712 + */ + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x000>; + enable-method = "psci"; + d-cache-size = <0x10000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set + i-cache-size = <0x10000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set + next-level-cache = <&l2_cache_l0>; + + l2_cache_l0: l2-cache-l0 { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <128>; + cache-sets = <1024>; //512KiB(size)/64(line-size)=8192ways/8-way set + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_cache>; + }; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x100>; + enable-method = "psci"; + d-cache-size = <0x10000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set + i-cache-size = <0x10000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set + next-level-cache = <&l2_cache_l1>; + + l2_cache_l1: l2-cache-l1 { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <128>; + cache-sets = <1024>; //512KiB(size)/64(line-size)=8192ways/8-way set + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_cache>; + }; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x200>; + enable-method = "psci"; + d-cache-size = <0x10000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set + i-cache-size = <0x10000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set + next-level-cache = <&l2_cache_l2>; + + l2_cache_l2: l2-cache-l2 { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <128>; + cache-sets = <1024>; //512KiB(size)/64(line-size)=8192ways/8-way set + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_cache>; + }; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x300>; + enable-method = "psci"; + d-cache-size = <0x10000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set + i-cache-size = <0x10000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set + next-level-cache = <&l2_cache_l3>; + + l2_cache_l3: l2-cache-l3 { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <128>; + cache-sets = <1024>; //512KiB(size)/64(line-size)=8192ways/8-way set + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_cache>; + }; + }; + + /* Source for cache-line-size and cache-sets: + * https://developer.arm.com/documentation/100453/0401/L3-cache?lang=en + * Source for cache-size: + * https://www.raspberrypi.com/documentation/computers/processors.html#bcm2712 + */ + l3_cache: l3-cache { + compatible = "cache"; + cache-size = <0x200000>; + cache-line-size = <64>; + cache-sets = <2048>; // 2MiB(size)/64(line-size)=32768ways/16-way set + cache-level = <3>; + cache-unified; + }; + }; + + psci { + method = "smc"; + compatible = "arm,psci-1.0", "arm,psci-0.2"; + }; + + rmem: reserved-memory { + ranges; + #address-cells = <2>; + #size-cells = <2>; + + atf@0 { + reg = <0x0 0x0 0x0 0x80000>; + no-map; + }; + + cma: linux,cma { + compatible = "shared-dma-pool"; + size = <0x0 0x4000000>; /* 64MB */ + reusable; + linux,cma-default; + alloc-ranges = <0x0 0x00000000 0x0 0x40000000>; + }; + }; + + soc: soc@107c000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0x10 0x00000000 0x80000000>; + #address-cells = <1>; + #size-cells = <1>; + + sdio1: mmc@fff000 { + compatible = "brcm,bcm2712-sdhci", + "brcm,sdhci-brcmstb"; + reg = <0x00fff000 0x260>, + <0x00fff400 0x200>; + reg-names = "host", "cfg"; + interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_emmc2>; + clock-names = "sw_sdio"; + mmc-ddr-3_3v; + }; + + system_timer: timer@7c003000 { + compatible = "brcm,bcm2835-system-timer"; + reg = <0x7c003000 0x1000>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <1000000>; + }; + + mailbox: mailbox@7c013880 { + compatible = "brcm,bcm2835-mbox"; + reg = <0x7c013880 0x40>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <0>; + }; + + local_intc: interrupt-controller@7cd00000 { + compatible = "brcm,bcm2836-l1-intc"; + reg = <0x7cd00000 0x100>; + }; + + uart10: serial@7d001000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x7d001000 0x200>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_uart>, <&clk_vpu>; + clock-names = "uartclk", "apb_pclk"; + arm,primecell-periphid = <0x00241011>; + status = "disabled"; + }; + + interrupt-controller@7d517000 { + compatible = "brcm,bcm7271-l2-intc"; + reg = <0x7d517000 0x10>; + interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gio_aon: gpio@7d517c00 { + compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio"; + reg = <0x7d517c00 0x40>; + gpio-controller; + #gpio-cells = <2>; + brcm,gpio-bank-widths = <17 6>; + /* The lack of 'interrupt-controller' property here is intended: + * don't use GIO_AON as an interrupt controller because it will + * clash with the firmware monitoring the PMIC interrupt via the VPU. + */ + }; + + gicv2: interrupt-controller@7fff9000 { + compatible = "arm,gic-400"; + reg = <0x7fff9000 0x1000>, + <0x7fffa000 0x2000>, + <0x7fffc000 0x2000>, + <0x7fffe000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts b/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts index 47a389d9ff7d..9d74fa6bfed9 100644 --- a/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts +++ b/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts @@ -32,7 +32,7 @@ device_type = "memory"; reg = <0x0 0x80000000 0x3da00000>, <0x0 0xc0000000 0x40000000>, - <0x8 0x80000000 0x40000000>; + <0x8 0x80000000 0x80000000>; }; gpio-keys { diff --git a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi index 0248329da49a..b36292a7db64 100644 --- a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi +++ b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi @@ -251,6 +251,52 @@ "dout_fsys2_clkcmu_ethernet"; }; + cmu_dpum: clock-controller@18c00000 { + compatible = "samsung,exynosautov9-cmu-dpum"; + reg = <0x18c00000 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top DOUT_CLKCMU_DPUM_BUS>; + clock-names = "oscclk", "bus"; + }; + + sysmmu_dpum_0: sysmmu@18c80000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x18c80000 0x10000>; + interrupts = <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_dpum CLK_GOUT_DPUM_SYSMMU_D0_CLK>; + clock-names = "sysmmu"; + #iommu-cells = <0>; + }; + + sysmmu_dpum_1: sysmmu@18c90000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x18c90000 0x10000>; + interrupts = <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_dpum CLK_GOUT_DPUM_SYSMMU_D1_CLK>; + clock-names = "sysmmu"; + #iommu-cells = <0>; + }; + + sysmmu_dpum_2: sysmmu@18ca0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x18ca0000 0x10000>; + interrupts = <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_dpum CLK_GOUT_DPUM_SYSMMU_D2_CLK>; + clock-names = "sysmmu"; + #iommu-cells = <0>; + }; + + sysmmu_dpum_3: sysmmu@18cb0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x18cb0000 0x10000>; + interrupts = <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_dpum CLK_GOUT_DPUM_SYSMMU_D3_CLK>; + clock-names = "sysmmu"; + #iommu-cells = <0>; + }; + cmu_core: clock-controller@1b030000 { compatible = "samsung,exynosautov9-cmu-core"; reg = <0x1b030000 0x8000>; diff --git a/arch/arm64/boot/dts/exynos/exynosautov920.dtsi b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi index c1c8566d74f5..91882b37fdb3 100644 --- a/arch/arm64/boot/dts/exynos/exynosautov920.dtsi +++ b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi @@ -6,6 +6,7 @@ * */ +#include <dt-bindings/clock/samsung,exynosautov920.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/soc/samsung,exynos-usi.h> @@ -38,17 +39,6 @@ clock-output-names = "oscclk"; }; - /* - * FIXME: Keep the stub clock for serial driver, until proper clock - * driver is implemented. - */ - clock_usi: clock-usi { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <200000000>; - clock-output-names = "usi"; - }; - cpus: cpus { #address-cells = <2>; #size-cells = <0>; @@ -192,6 +182,19 @@ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; + cmu_peric0: clock-controller@10800000 { + compatible = "samsung,exynosautov920-cmu-peric0"; + reg = <0x10800000 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top DOUT_CLKCMU_PERIC0_NOC>, + <&cmu_top DOUT_CLKCMU_PERIC0_IP>; + clock-names = "oscclk", + "noc", + "ip"; + }; + syscon_peric0: syscon@10820000 { compatible = "samsung,exynosautov920-peric0-sysreg", "syscon"; @@ -213,7 +216,8 @@ #address-cells = <1>; #size-cells = <1>; ranges; - clocks = <&clock_usi>, <&clock_usi>; + clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, + <&cmu_peric0 CLK_DOUT_PERIC0_USI00_USI>; clock-names = "pclk", "ipclk"; status = "disabled"; @@ -224,7 +228,8 @@ interrupts = <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&uart0_bus>; - clocks = <&clock_usi>, <&clock_usi>; + clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, + <&cmu_peric0 CLK_DOUT_PERIC0_USI00_USI>; clock-names = "uart", "clk_uart_baud0"; samsung,uart-fifosize = <256>; status = "disabled"; @@ -254,6 +259,15 @@ interrupts = <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>; }; + cmu_top: clock-controller@11000000 { + compatible = "samsung,exynosautov920-cmu-top"; + reg = <0x11000000 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>; + clock-names = "oscclk"; + }; + pinctrl_alive: pinctrl@11850000 { compatible = "samsung,exynosautov920-pinctrl"; reg = <0x11850000 0x10000>; diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi index eadb8822e6d4..302c5beb224a 100644 --- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi +++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi @@ -1394,6 +1394,21 @@ pmu_system_controller: system-controller@17460000 { compatible = "google,gs101-pmu", "syscon"; reg = <0x17460000 0x10000>; + + poweroff: syscon-poweroff { + compatible = "syscon-poweroff"; + regmap = <&pmu_system_controller>; + offset = <0x3e9c>; /* PAD_CTRL_PWR_HOLD */ + mask = <0x100>; /* reset value */ + }; + + reboot: syscon-reboot { + compatible = "syscon-reboot"; + regmap = <&pmu_system_controller>; + offset = <0x3a00>; /* SYSTEM_CONFIGURATION */ + mask = <0x2>; /* SWRESET_SYSTEM */ + value = <0x2>; /* reset value */ + }; }; pinctrl_gpio_alive: pinctrl@174d0000 { diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index f04c22b7de72..9d3df8b218a2 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -129,11 +129,11 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw71xx-0x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw75xx-0x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7901.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7902.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7903.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7904.dtb -dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7905-0x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dahlia.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dev.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-mallow.dtb @@ -174,16 +174,19 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-navqp.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb +imx8mp-phyboard-pollux-rdk-no-eth-dtbs += imx8mp-phyboard-pollux-rdk.dtb imx8mp-phycore-no-eth.dtbo +dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk-no-eth.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-hdmi.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-lt6.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-mi1010ait-1cp1.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mp-ras314.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-var-som-symphony.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw71xx-2x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw72xx-2x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw73xx-2x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx.dtb -dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw7905-2x.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw75xx-2x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dahlia.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dev.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-mallow.dtb @@ -238,6 +241,8 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qxp-tqma8xqp-mba8xx.dtb dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx93-14x14-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx93-kontron-bl-osm-s.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts index 2517528f684f..75081ce3e9a6 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts @@ -20,6 +20,12 @@ clock-frequency = <25000000>; }; + sc16is7xx_clk: clock-sc16is7xx { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + reg_1p8v: regulator-1p8v { compatible = "regulator-fixed"; regulator-name = "1P8V"; @@ -69,12 +75,6 @@ clocks = <&sc16is7xx_clk>; interrupt-parent = <&gpio1>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; - - sc16is7xx_clk: clock-sc16is7xx { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; - }; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi index e61ea7e0737e..dd479889658d 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -164,7 +164,6 @@ QORIQ_CLK_PLL_DIV(1)>; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; - big-endian; bus-width = <4>; status = "disabled"; }; @@ -183,7 +182,6 @@ QORIQ_CLK_PLL_DIV(1)>; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; - big-endian; broken-cd; bus-width = <4>; status = "disabled"; @@ -541,7 +539,6 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - num-viewport = <2>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ @@ -556,7 +553,7 @@ status = "disabled"; }; - rcpm: power-controller@1ee2140 { + rcpm: wakeup-controller@1ee2140 { compatible = "fsl,ls1012a-rcpm", "fsl,qoriq-rcpm-2.1+"; reg = <0x0 0x1ee2140 0x0 0x4>; #fsl,rcpm-wakeup-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts index 195bdbafdf7c..d9fac647f432 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts @@ -26,6 +26,13 @@ cooling-levels = <1 128 192 255>; }; + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + sound { #address-cells = <1>; #size-cells = <0>; @@ -107,6 +114,11 @@ clock-names = "mclk"; assigned-clocks = <&mclk>; assigned-clock-rates = <1250000>; + AVDD-supply = <®_3p3v>; + CPVDD-supply = <®_3p3v>; + DBVDD-supply = <®_3p3v>; + DCVDD-supply = <®_3p3v>; + MICVDD-supply = <®_3p3v>; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index acf293310f7a..7d172d7e5737 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -112,13 +112,6 @@ }; }; - reboot { - compatible = "syscon-reboot"; - regmap = <&rst>; - offset = <0>; - mask = <0x02>; - }; - timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | @@ -150,6 +143,7 @@ its: msi-controller@6020000 { compatible = "arm,gic-v3-its"; msi-controller; + #msi-cells = <1>; reg = <0x0 0x06020000 0 0x20000>;/* GIC Translater */ }; }; @@ -235,10 +229,16 @@ }; }; - rst: syscon@1e60000 { - compatible = "syscon"; + syscon@1e60000 { + compatible = "fsl,ls1028a-reset", "syscon", "simple-mfd"; reg = <0x0 0x1e60000 0x0 0x10000>; little-endian; + + reboot { + compatible = "syscon-reboot"; + offset = <0>; + mask = <0x02>; + }; }; sfp: efuse@1e80000 { @@ -381,7 +381,6 @@ dmas = <&edma0 0 62>, <&edma0 0 60>; dma-names = "tx", "rx"; spi-num-chipselects = <4>; - little-endian; status = "disabled"; }; @@ -397,7 +396,6 @@ dmas = <&edma0 0 58>, <&edma0 0 56>; dma-names = "tx", "rx"; spi-num-chipselects = <4>; - little-endian; status = "disabled"; }; @@ -413,7 +411,6 @@ dmas = <&edma0 0 54>, <&edma0 0 2>; dma-names = "tx", "rx"; spi-num-chipselects = <3>; - little-endian; status = "disabled"; }; @@ -662,7 +659,7 @@ bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x80 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ - msi-parent = <&its>; + msi-parent = <&its 0>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, @@ -701,7 +698,7 @@ bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x88 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ - msi-parent = <&its>; + msi-parent = <&its 0>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, @@ -1080,7 +1077,7 @@ reg = <0x01 0xf0000000 0x0 0x100000>; #address-cells = <3>; #size-cells = <2>; - msi-parent = <&its>; + msi-parent = <&its 0>; device_type = "pci"; bus-range = <0x0 0x0>; dma-coherent; @@ -1319,7 +1316,7 @@ status = "disabled"; }; - rcpm: power-controller@1e34040 { + rcpm: wakeup-controller@1e34040 { compatible = "fsl,ls1028a-rcpm", "fsl,qoriq-rcpm-2.1+"; reg = <0x0 0x1e34040 0x0 0x1c>; #fsl,rcpm-wakeup-cells = <7>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi index 5c4d7eef8b61..ca7cd7a33c01 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi @@ -29,6 +29,7 @@ enet1: ethernet@e2000 { pcsphy-handle = <&pcsphy1>, <&qsgmiib_pcs1>; + pcs-handle = <&pcsphy1>, <&qsgmiib_pcs1>; pcs-handle-names = "sgmii", "qsgmii"; }; @@ -40,11 +41,13 @@ enet4: ethernet@e8000 { pcsphy-handle = <&pcsphy4>, <&qsgmiib_pcs2>; + pcs-handle = <&pcsphy4>, <&qsgmiib_pcs2>; pcs-handle-names = "sgmii", "qsgmii"; }; enet5: ethernet@ea000 { pcsphy-handle = <&pcsphy5>, <&qsgmiib_pcs3>; + pcs-handle = <&pcsphy5>, <&qsgmiib_pcs3>; pcs-handle-names = "sgmii", "qsgmii"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts index 11b1356e95d5..e850551b16ac 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts @@ -211,7 +211,7 @@ }; &fpga { - mdio-mux-emi1@54 { + mdio-mux@54 { compatible = "mdio-mux-mmioreg", "mdio-mux"; mdio-parent-bus = <&mdio0>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index ab4c919e3e16..c0e3e8fa1e79 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -431,7 +431,6 @@ clock-frequency = <0>; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; - big-endian; bus-width = <4>; }; @@ -439,7 +438,6 @@ compatible = "fsl,qoriq-memory-controller"; reg = <0x0 0x1080000 0x0 0x1000>; interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; - big-endian; }; tmu: tmu@1f00000 { @@ -653,7 +651,7 @@ #interrupt-cells = <2>; }; - uqe: uqe@2400000 { + uqe: uqe-bus@2400000 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,qe", "simple-bus"; @@ -667,7 +665,6 @@ qeic: qeic@80 { compatible = "fsl,qe-ic"; reg = <0x80 0x80>; - #address-cells = <0>; interrupt-controller; #interrupt-cells = <1>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, @@ -675,16 +672,12 @@ }; si1: si@700 { - #address-cells = <1>; - #size-cells = <0>; compatible = "fsl,ls1043-qe-si", "fsl,t1040-qe-si"; reg = <0x700 0x80>; }; siram1: siram@1000 { - #address-cells = <1>; - #size-cells = <1>; compatible = "fsl,ls1043-qe-siram", "fsl,t1040-qe-siram"; reg = <0x1000 0x800>; @@ -804,7 +797,7 @@ QORIQ_CLK_PLL_DIV(1)>; }; - aux_bus: aux-bus { + aux_bus: bus { #address-cells = <2>; #size-cells = <2>; compatible = "simple-bus"; @@ -962,7 +955,7 @@ }; qdma: dma-controller@8380000 { - compatible = "fsl,ls1021a-qdma", "fsl,ls1043a-qdma"; + compatible = "fsl,ls1043a-qdma", "fsl,ls1021a-qdma"; reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */ <0x0 0x8390000 0x0 0x10000>, /* Status regs */ <0x0 0x83a0000 0x0 0x40000>; /* Block regs */ @@ -983,7 +976,7 @@ big-endian; }; - rcpm: power-controller@1ee2140 { + rcpm: wakeup-controller@1ee2140 { compatible = "fsl,ls1043a-rcpm", "fsl,qoriq-rcpm-2.1+"; reg = <0x0 0x1ee2140 0x0 0x4>; #fsl,rcpm-wakeup-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi index 4e3345093943..15ff7c569d28 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi @@ -24,6 +24,7 @@ /* these aliases provide the FMan ports mapping */ enet0: ethernet@e0000 { pcsphy-handle = <&qsgmiib_pcs3>; + pcs-handle = <&qsgmiib_pcs3>; pcs-handle-names = "qsgmii"; }; @@ -38,11 +39,13 @@ enet4: ethernet@e8000 { pcsphy-handle = <&pcsphy4>, <&qsgmiib_pcs1>; + pcs-handle = <&pcsphy4>, <&qsgmiib_pcs1>; pcs-handle-names = "sgmii", "qsgmii"; }; enet5: ethernet@ea000 { pcsphy-handle = <&pcsphy5>, <&pcsphy5>; + pcs-handle = <&pcsphy5>, <&pcsphy5>; pcs-handle-names = "sgmii", "qsgmii"; }; @@ -51,6 +54,7 @@ enet7: ethernet@f2000 { pcsphy-handle = <&pcsphy7>, <&qsgmiib_pcs2>, <&pcsphy7>; + pcs-handle = <&pcsphy7>, <&qsgmiib_pcs2>, <&pcsphy7>; pcs-handle-names = "sgmii", "qsgmii", "xfi"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts index e5296e51f656..a1d9102ff32b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts @@ -237,7 +237,7 @@ #address-cells = <1>; #size-cells = <1>; - mdio-mux-emi1 { + mdio-mux@54 { compatible = "mdio-mux-mmioreg", "mdio-mux"; mdio-parent-bus = <&mdio0>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index 55019866d6a2..0baf256b4400 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -282,7 +282,6 @@ compatible = "fsl,qoriq-memory-controller"; reg = <0x0 0x1080000 0x0 0x1000>; interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; - big-endian; }; ifc: memory-controller@1530000 { @@ -315,7 +314,6 @@ clocks = <&clockgen QORIQ_CLK_HWACCEL 1>; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; - big-endian; bus-width = <4>; }; @@ -694,7 +692,6 @@ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; - big-endian; }; edma0: dma-controller@2c00000 { @@ -715,7 +712,7 @@ QORIQ_CLK_PLL_DIV(2)>; }; - aux_bus: aux-bus { + aux_bus: bus { #address-cells = <2>; #size-cells = <2>; compatible = "simple-bus"; @@ -823,7 +820,7 @@ }; pcie_ep1: pcie_ep@3400000 { - compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep"; + compatible = "fsl,ls1046a-pcie-ep"; reg = <0x00 0x03400000 0x0 0x00100000>, <0x40 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space"; @@ -862,7 +859,7 @@ }; pcie_ep2: pcie_ep@3500000 { - compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep"; + compatible = "fsl,ls1046a-pcie-ep"; reg = <0x00 0x03500000 0x0 0x00100000>, <0x48 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space"; @@ -901,7 +898,7 @@ }; pcie_ep3: pcie_ep@3600000 { - compatible = "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"; + compatible = "fsl,ls1046a-pcie-ep"; reg = <0x00 0x03600000 0x0 0x00100000>, <0x50 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space"; @@ -935,7 +932,7 @@ big-endian; }; - rcpm: power-controller@1ee2140 { + rcpm: wakeup-controller@1ee2140 { compatible = "fsl,ls1046a-rcpm", "fsl,qoriq-rcpm-2.1+"; reg = <0x0 0x1ee2140 0x0 0x4>; #fsl,rcpm-wakeup-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts index ee8e932628d1..2df16bfb901c 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts @@ -170,6 +170,13 @@ /* IRQ_RTC_B -> IRQ0_B(CPLD) -> IRQ00(CPU), active low */ interrupts-extended = <&extirq 0 IRQ_TYPE_LEVEL_LOW>; }; + + rtc@53 { + compatible = "nxp,pcf2131"; + reg = <0x53>; + /* IRQ_RTC_B -> IRQ0_B(CPLD) -> IRQ00(CPU), active low */ + interrupts-extended = <&extirq 0 IRQ_TYPE_LEVEL_LOW>; + }; }; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts index d4867d6cf47c..bc0d89427fbe 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts @@ -220,7 +220,7 @@ #gpio-cells = <2>; gpio-controller; - admin_led_lower { + admin-led-lower-hog { gpio-hog; gpios = <13 GPIO_ACTIVE_HIGH>; output-low; @@ -323,9 +323,9 @@ reg = <0x580000 0x40000>; }; - partition@5C0000 { + partition@5c0000 { label = "dpc"; - reg = <0x5C0000 0x40000>; + reg = <0x5c0000 0x40000>; }; partition@600000 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index e3a7db21fe29..9d5726378aa0 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -126,6 +126,7 @@ its: msi-controller@6020000 { compatible = "arm,gic-v3-its"; msi-controller; + #msi-cells = <1>; reg = <0x0 0x6020000 0 0x20000>; }; }; @@ -575,7 +576,7 @@ bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ - msi-parent = <&its>; + msi-parent = <&its 0>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>, @@ -587,7 +588,7 @@ }; pcie_ep1: pcie-ep@3400000 { - compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep"; + compatible = "fsl,ls1088a-pcie-ep"; reg = <0x00 0x03400000 0x0 0x00100000>, <0x20 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space"; @@ -614,7 +615,7 @@ bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x28 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ - msi-parent = <&its>; + msi-parent = <&its 0>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 0 114 IRQ_TYPE_LEVEL_HIGH>, @@ -626,7 +627,7 @@ }; pcie_ep2: pcie-ep@3500000 { - compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep"; + compatible = "fsl,ls1088a-pcie-ep"; reg = <0x00 0x03500000 0x0 0x00100000>, <0x28 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space"; @@ -652,7 +653,7 @@ bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x30 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ - msi-parent = <&its>; + msi-parent = <&its 0>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 0 119 IRQ_TYPE_LEVEL_HIGH>, @@ -664,7 +665,7 @@ }; pcie_ep3: pcie-ep@3600000 { - compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep"; + compatible = "fsl,ls1088a-pcie-ep"; reg = <0x00 0x03600000 0x0 0x00100000>, <0x30 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space"; @@ -964,7 +965,7 @@ compatible = "fsl,qoriq-mc"; reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ - msi-parent = <&its>; + msi-parent = <&its 0>; iommu-map = <0 &smmu 0 0>; /* This is fixed-up by u-boot */ dma-coherent; #address-cells = <3>; @@ -1033,7 +1034,7 @@ }; }; - rcpm: power-controller@1e34040 { + rcpm: wakeup-controller@1e34040 { compatible = "fsl,ls1088a-rcpm", "fsl,qoriq-rcpm-2.1+"; reg = <0x0 0x1e34040 0x0 0x18>; #fsl,rcpm-wakeup-cells = <6>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi index 9178cd61c786..556d8c5f3180 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi @@ -64,7 +64,7 @@ reg = <3 0 0x1000>; ranges = <0 3 0 0x1000>; - mdio-mux-emi1@54 { + mdio-mux@54 { compatible = "mdio-mux-mmioreg", "mdio-mux"; mdio-parent-bus = <&emdio1>; reg = <0x54 1>; /* BRDCFG4 */ diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index 1b306d6802ce..9421fdd7e30e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -63,20 +63,20 @@ its: msi-controller@6020000 { compatible = "arm,gic-v3-its"; msi-controller; + #msi-cells = <1>; reg = <0x0 0x6020000 0 0x20000>; }; }; rstcr: syscon@1e60000 { - compatible = "fsl,ls2080a-rstcr", "syscon"; + compatible = "fsl,ls1028a-reset", "syscon", "simple-mfd"; reg = <0x0 0x1e60000 0x0 0x4>; - }; - reboot { - compatible = "syscon-reboot"; - regmap = <&rstcr>; - offset = <0x0>; - mask = <0x2>; + reboot { + compatible = "syscon-reboot"; + offset = <0x0>; + mask = <0x2>; + }; }; thermal-zones { @@ -758,7 +758,7 @@ compatible = "fsl,qoriq-mc"; reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ - msi-parent = <&its>; + msi-parent = <&its 0>; iommu-map = <0 &smmu 0 0>; /* This is fixed-up by u-boot */ dma-coherent; #address-cells = <3>; @@ -1075,7 +1075,7 @@ }; pcie1: pcie@3400000 { - compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie"; + compatible = "fsl,ls2080a-pcie"; reg-names = "regs", "config"; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "intr"; @@ -1085,7 +1085,7 @@ dma-coherent; num-viewport = <6>; bus-range = <0x0 0xff>; - msi-parent = <&its>; + msi-parent = <&its 0>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 0 109 4>, @@ -1097,7 +1097,7 @@ }; pcie2: pcie@3500000 { - compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie"; + compatible = "fsl,ls2080a-pcie"; reg-names = "regs", "config"; interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "intr"; @@ -1107,7 +1107,7 @@ dma-coherent; num-viewport = <6>; bus-range = <0x0 0xff>; - msi-parent = <&its>; + msi-parent = <&its 0>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 0 114 4>, @@ -1119,7 +1119,7 @@ }; pcie3: pcie@3600000 { - compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie"; + compatible = "fsl,ls2080a-pcie"; reg-names = "regs", "config"; interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "intr"; @@ -1129,7 +1129,7 @@ dma-coherent; num-viewport = <256>; bus-range = <0x0 0xff>; - msi-parent = <&its>; + msi-parent = <&its 0>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 0 119 4>, @@ -1141,7 +1141,7 @@ }; pcie4: pcie@3700000 { - compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie"; + compatible = "fsl,ls2080a-pcie"; reg-names = "regs", "config"; interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "intr"; @@ -1151,7 +1151,7 @@ dma-coherent; num-viewport = <6>; bus-range = <0x0 0xff>; - msi-parent = <&its>; + msi-parent = <&its 0>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 0 124 4>, @@ -1218,7 +1218,7 @@ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; }; - rcpm: power-controller@1e34040 { + rcpm: wakeup-controller@1e34040 { compatible = "fsl,ls208xa-rcpm", "fsl,qoriq-rcpm-2.1+"; reg = <0x0 0x1e34040 0x0 0x18>; #fsl,rcpm-wakeup-cells = <6>; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a.dts index da0f58e26b9a..f6a4f8d54301 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a.dts @@ -320,7 +320,7 @@ reg = <1>; peer-hub = <&hub_3_0>; reset-gpios = <&gpioex1 0 GPIO_ACTIVE_LOW>; - vcc-supply = <®_vcc3v3>; + vdd-supply = <®_vcc3v3>; }; hub_3_0: hub@2 { @@ -328,7 +328,7 @@ reg = <2>; peer-hub = <&hub_2_0>; reset-gpios = <&gpioex1 0 GPIO_ACTIVE_LOW>; - vcc-supply = <®_vcc3v3>; + vdd-supply = <®_vcc3v3>; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index bd75a658767d..927ecf66a740 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -398,6 +398,7 @@ its: msi-controller@6020000 { compatible = "arm,gic-v3-its"; msi-controller; + #msi-cells = <1>; reg = <0x0 0x6020000 0 0x20000>; }; }; @@ -1078,7 +1079,7 @@ timeout-sec = <30>; }; - rcpm: power-controller@1e34040 { + rcpm: wakeup-controller@1e34040 { compatible = "fsl,lx2160a-rcpm", "fsl,qoriq-rcpm-2.1+"; reg = <0x0 0x1e34040 0x0 0x1c>; #fsl,rcpm-wakeup-cells = <7>; @@ -1181,7 +1182,7 @@ ppio-wins = <8>; bus-range = <0x0 0xff>; ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ - msi-parent = <&its>; + msi-parent = <&its 0>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, @@ -1209,7 +1210,7 @@ ppio-wins = <8>; bus-range = <0x0 0xff>; ranges = <0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ - msi-parent = <&its>; + msi-parent = <&its 0>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, @@ -1237,7 +1238,7 @@ ppio-wins = <24>; bus-range = <0x0 0xff>; ranges = <0x82000000 0x0 0x40000000 0x90 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ - msi-parent = <&its>; + msi-parent = <&its 0>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, @@ -1265,7 +1266,7 @@ ppio-wins = <8>; bus-range = <0x0 0xff>; ranges = <0x82000000 0x0 0x40000000 0x98 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ - msi-parent = <&its>; + msi-parent = <&its 0>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, @@ -1293,7 +1294,7 @@ ppio-wins = <24>; bus-range = <0x0 0xff>; ranges = <0x82000000 0x0 0x40000000 0xa0 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ - msi-parent = <&its>; + msi-parent = <&its 0>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, @@ -1321,7 +1322,7 @@ ppio-wins = <8>; bus-range = <0x0 0xff>; ranges = <0x82000000 0x0 0x40000000 0xa8 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ - msi-parent = <&its>; + msi-parent = <&its 0>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, @@ -1777,7 +1778,7 @@ compatible = "fsl,qoriq-mc"; reg = <0x00000008 0x0c000000 0 0x40>, <0x00000000 0x08340000 0 0x40000>; - msi-parent = <&its>; + msi-parent = <&its 0>; /* iommu-map property is fixed up by u-boot */ iommu-map = <0 &smmu 0 0>; dma-coherent; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi index f7a91d43a0ff..575be8115e42 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi @@ -34,6 +34,8 @@ dma_subsys: bus@5a000000 { assigned-clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <60000000>; power-domains = <&pd IMX_SC_R_SPI_0>; + dmas = <&edma2 1 0 0>, <&edma2 0 0 FSL_EDMA_RX>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -50,6 +52,8 @@ dma_subsys: bus@5a000000 { assigned-clocks = <&clk IMX_SC_R_SPI_1 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <60000000>; power-domains = <&pd IMX_SC_R_SPI_1>; + dmas = <&edma2 3 0 0>, <&edma2 2 0 FSL_EDMA_RX>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -66,6 +70,8 @@ dma_subsys: bus@5a000000 { assigned-clocks = <&clk IMX_SC_R_SPI_2 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <60000000>; power-domains = <&pd IMX_SC_R_SPI_2>; + dmas = <&edma2 5 0 0>, <&edma2 4 0 FSL_EDMA_RX>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -82,6 +88,8 @@ dma_subsys: bus@5a000000 { assigned-clocks = <&clk IMX_SC_R_SPI_3 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <60000000>; power-domains = <&pd IMX_SC_R_SPI_3>; + dmas = <&edma2 7 0 0>, <&edma2 6 0 FSL_EDMA_RX>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -303,6 +311,8 @@ dma_subsys: bus@5a000000 { i2c0: i2c@5a800000 { reg = <0x5a800000 0x4000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; clocks = <&i2c0_lpcg IMX_LPCG_CLK_0>, <&i2c0_lpcg IMX_LPCG_CLK_4>; @@ -315,6 +325,8 @@ dma_subsys: bus@5a000000 { i2c1: i2c@5a810000 { reg = <0x5a810000 0x4000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; clocks = <&i2c1_lpcg IMX_LPCG_CLK_0>, <&i2c1_lpcg IMX_LPCG_CLK_4>; @@ -327,6 +339,8 @@ dma_subsys: bus@5a000000 { i2c2: i2c@5a820000 { reg = <0x5a820000 0x4000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; clocks = <&i2c2_lpcg IMX_LPCG_CLK_0>, <&i2c2_lpcg IMX_LPCG_CLK_4>; @@ -339,6 +353,8 @@ dma_subsys: bus@5a000000 { i2c3: i2c@5a830000 { reg = <0x5a830000 0x4000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; clocks = <&i2c3_lpcg IMX_LPCG_CLK_0>, <&i2c3_lpcg IMX_LPCG_CLK_4>; @@ -362,7 +378,7 @@ dma_subsys: bus@5a000000 { assigned-clock-rates = <24000000>; power-domains = <&pd IMX_SC_R_ADC_0>; status = "disabled"; - }; + }; adc1: adc@5a890000 { compatible = "nxp,imx8qxp-adc"; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi index 77d2928997b4..d39242c1b9f7 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi @@ -26,7 +26,6 @@ img_subsys: bus@58000000 { assigned-clock-rates = <200000000>, <200000000>; power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>, <&pd IMX_SC_R_MJPEG_DEC_S0>; - slot = <0>; }; jpegenc: jpegenc@58450000 { @@ -39,7 +38,6 @@ img_subsys: bus@58000000 { assigned-clock-rates = <200000000>, <200000000>; power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>, <&pd IMX_SC_R_MJPEG_ENC_S0>; - slot = <0>; }; img_jpeg_dec_lpcg: clock-controller@585d0000 { diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-lvds0.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-lvds0.dtsi new file mode 100644 index 000000000000..d00036204a8c --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8-ss-lvds0.dtsi @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: GPL-2.0-only and MIT + +/* + * Copyright 2024 NXP + */ + +lvds0_subsys: bus@56240000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x56240000 0x0 0x56240000 0x10000>; + + qm_lvds0_lis_lpcg: qxp_mipi1_lis_lpcg: clock-controller@56243000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x56243000 0x4>; + #clock-cells = <1>; + clock-output-names = "mipi1_lis_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_MIPI_1>; + }; + + qm_lvds0_pwm_lpcg: qxp_mipi1_pwm_lpcg: clock-controller@5624300c { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5624300c 0x4>; + #clock-cells = <1>; + clock-output-names = "mipi1_pwm_lpcg_clk", + "mipi1_pwm_lpcg_ipg_clk", + "mipi1_pwm_lpcg_32k_clk"; + power-domains = <&pd IMX_SC_R_MIPI_1_PWM_0>; + }; + + qm_lvds0_i2c0_lpcg: qxp_mipi1_i2c0_lpcg: clock-controller@56243010 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x56243010 0x4>; + #clock-cells = <1>; + clock-output-names = "mipi1_i2c0_lpcg_clk", + "mipi1_i2c0_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_MIPI_1_I2C_0>; + }; + + qm_pwm_lvds0: qxp_pwm_mipi_lvds1: pwm@56244000 { + compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm"; + reg = <0x56244000 0x1000>; + clock-names = "ipg", "per"; + assigned-clocks = <&clk IMX_SC_R_MIPI_1_PWM_0 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <24000000>; + #pwm-cells = <3>; + power-domains = <&pd IMX_SC_R_MIPI_1_PWM_0>; + status = "disabled"; + }; + + qm_i2c0_lvds0: qxp_i2c0_mipi_lvds1: i2c@56246000 { + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x56246000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <8>; + clock-names = "per", "ipg"; + assigned-clocks = <&clk IMX_SC_R_MIPI_1_I2C_0 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <24000000>; + power-domains = <&pd IMX_SC_R_MIPI_1_I2C_0>; + status = "disabled"; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-lvds1.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-lvds1.dtsi new file mode 100644 index 000000000000..12ae4f48e1e1 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8-ss-lvds1.dtsi @@ -0,0 +1,114 @@ +// SPDX-License-Identifier: GPL-2.0-only and MIT + +/* + * Copyright 2024 NXP + */ + +lvds1_subsys: bus@57240000 { + compatible = "simple-bus"; + interrupt-parent = <&irqsteer_lvds1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x57240000 0x0 0x57240000 0x10000>; + + irqsteer_lvds1: interrupt-controller@57240000 { + compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer"; + reg = <0x57240000 0x1000>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + interrupt-parent = <&gic>; + #interrupt-cells = <1>; + clocks = <&lvds1_lis_lpcg IMX_LPCG_CLK_4>; + clock-names = "ipg"; + power-domains = <&pd IMX_SC_R_LVDS_1>; + fsl,channel = <0>; + fsl,num-irqs = <32>; + }; + + lvds1_lis_lpcg: clock-controller@57243000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x57243000 0x4>; + #clock-cells = <1>; + clocks = <&lvds_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_4>; + clock-output-names = "lvds1_lis_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_LVDS_1>; + }; + + lvds1_pwm_lpcg: clock-controller@5724300c { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5724300c 0x4>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_LVDS_1_PWM_0 IMX_SC_PM_CLK_PER>, + <&lvds_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "lvds1_pwm_lpcg_clk", + "lvds1_pwm_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_LVDS_1_PWM_0>; + }; + + lvds1_i2c0_lpcg: clock-controller@57243010 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x57243010 0x4>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_LVDS_1_I2C_0 IMX_SC_PM_CLK_PER>, + <&lvds_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "lvds1_i2c0_lpcg_clk", + "lvds1_i2c0_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_LVDS_1_I2C_0>; + }; + + lvds1_i2c1_lpcg: clock-controller@57243014 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x57243014 0x4>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_LVDS_1_I2C_0 IMX_SC_PM_CLK_PER>, + <&lvds_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "lvds1_i2c1_lpcg_clk", + "lvds1_i2c1_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_LVDS_1_I2C_0>; + }; + + pwm_lvds1: pwm@57244000 { + compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm"; + reg = <0x57244000 0x1000>; + clocks = <&lvds1_pwm_lpcg IMX_LPCG_CLK_4>, + <&lvds1_pwm_lpcg IMX_LPCG_CLK_0>; + clock-names = "ipg", "per"; + assigned-clocks = <&clk IMX_SC_R_LVDS_1_PWM_0 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <24000000>; + #pwm-cells = <3>; + power-domains = <&pd IMX_SC_R_LVDS_1_PWM_0>; + status = "disabled"; + }; + + i2c0_lvds1: i2c@57246000 { + compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x57246000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <8>; + clocks = <&lvds1_i2c0_lpcg IMX_LPCG_CLK_0>, + <&lvds1_i2c0_lpcg IMX_LPCG_CLK_4>; + clock-names = "per", "ipg"; + assigned-clocks = <&clk IMX_SC_R_LVDS_1_I2C_0 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <24000000>; + power-domains = <&pd IMX_SC_R_LVDS_1_I2C_0>; + status = "disabled"; + }; + + i2c1_lvds1: i2c@57247000 { + compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x57247000 0x1000>; + interrupts = <9>; + clocks = <&lvds1_i2c1_lpcg IMX_LPCG_CLK_0>, + <&lvds1_i2c1_lpcg IMX_LPCG_CLK_4>; + clock-names = "per", "ipg"; + assigned-clocks = <&clk IMX_SC_R_LVDS_1_I2C_0 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <24000000>; + power-domains = <&pd IMX_SC_R_LVDS_1_I2C_0>; + status = "disabled"; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-mipi0.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-mipi0.dtsi new file mode 100644 index 000000000000..9c5b0cbdfcbd --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8-ss-mipi0.dtsi @@ -0,0 +1,129 @@ +// SPDX-License-Identifier: GPL-2.0-only and MIT + +/* + * Copyright 2024 NXP + */ + +mipi0_subsys: bus@56220000 { + compatible = "simple-bus"; + interrupt-parent = <&irqsteer_mipi0>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x56220000 0x0 0x56220000 0x10000>; + + irqsteer_mipi0: interrupt-controller@56220000 { + compatible = "fsl,imx8qxp-irqsteer", "fsl,imx-irqsteer"; + reg = <0x56220000 0x1000>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + interrupt-parent = <&gic>; + #interrupt-cells = <1>; + clocks = <&mipi0_lis_lpcg IMX_LPCG_CLK_0>; + clock-names = "ipg"; + power-domains = <&pd IMX_SC_R_MIPI_0>; + fsl,channel = <0>; + fsl,num-irqs = <32>; + }; + + mipi0_lis_lpcg: clock-controller@56223000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x56223000 0x4>; + #clock-cells = <1>; + power-domains = <&pd IMX_SC_R_MIPI_0>; + }; + + mipi0_pwm_lpcg: clock-controller@5622300c { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5622300c 0x4>; + #clock-cells = <1>; + power-domains = <&pd IMX_SC_R_MIPI_0_PWM_0>; + }; + + mipi0_i2c0_lpcg_ipg_clk: clock-controller@56223014 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x56223014 0x4>; + #clock-cells = <1>; + clocks = <&mipi0_i2c0_lpcg_ipg_s_clk IMX_LPCG_CLK_0>; + clock-indices = <IMX_LPCG_CLK_0>; + clock-output-names = "mipi0_i2c0_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_MIPI_0_I2C_0>; + }; + + mipi0_i2c0_lpcg_ipg_s_clk: clock-controller@56223018 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x56223018 0x4>; + #clock-cells = <1>; + clocks = <&dsi_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>; + clock-output-names = "mipi0_i2c0_lpcg_ipg_s_clk"; + power-domains = <&pd IMX_SC_R_MIPI_0_I2C_0>; + }; + + mipi0_i2c0_lpcg_clk: clock-controller@5622301c { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5622301c 0x4>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_MIPI_0_I2C_0 IMX_SC_PM_CLK_MISC2>; + clock-indices = <IMX_LPCG_CLK_0>; + clock-output-names = "mipi0_i2c0_lpcg_clk"; + power-domains = <&pd IMX_SC_R_MIPI_0_I2C_0>; + }; + + mipi0_i2c1_lpcg_ipg_clk: clock-controller@56223024 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x56223024 0x4>; + #clock-cells = <1>; + clocks = <&mipi0_i2c1_lpcg_ipg_s_clk IMX_LPCG_CLK_0>; + clock-indices = <IMX_LPCG_CLK_0>; + clock-output-names = "mipi0_i2c1_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_MIPI_0_I2C_1>; + }; + + mipi0_i2c1_lpcg_ipg_s_clk: clock-controller@56223028 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x56223028 0x4>; + #clock-cells = <1>; + clocks = <&dsi_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>; + clock-output-names = "mipi0_i2c1_lpcg_ipg_s_clk"; + power-domains = <&pd IMX_SC_R_MIPI_0_I2C_1>; + }; + + mipi0_i2c1_lpcg_clk: clock-controller@5622302c { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5622302c 0x4>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_MIPI_0_I2C_1 IMX_SC_PM_CLK_MISC2>; + clock-indices = <IMX_LPCG_CLK_0>; + clock-output-names = "mipi0_i2c1_lpcg_clk"; + power-domains = <&pd IMX_SC_R_MIPI_0_I2C_1>; + }; + + pwm_mipi0: pwm@56224000 { + compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm"; + reg = <0x56224000 0x1000>; + clocks = <&mipi0_pwm_lpcg IMX_LPCG_CLK_4>, + <&mipi0_pwm_lpcg IMX_LPCG_CLK_0>; + clock-names = "ipg", "per"; + assigned-clocks = <&clk IMX_SC_R_MIPI_0_PWM_0 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <24000000>; + #pwm-cells = <3>; + power-domains = <&pd IMX_SC_R_MIPI_0_PWM_0>; + status = "disabled"; + }; + + i2c0_mipi0: i2c@56226000 { + compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x56226000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <8>; + clocks = <&mipi0_i2c0_lpcg_clk IMX_LPCG_CLK_0>, + <&mipi0_i2c0_lpcg_ipg_clk IMX_LPCG_CLK_0>; + clock-names = "per", "ipg"; + assigned-clocks = <&mipi0_i2c0_lpcg_clk IMX_LPCG_CLK_0>; + assigned-clock-rates = <24000000>; + power-domains = <&pd IMX_SC_R_MIPI_0_I2C_0>; + status = "disabled"; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-mipi1.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-mipi1.dtsi new file mode 100644 index 000000000000..5b1f08e412b2 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8-ss-mipi1.dtsi @@ -0,0 +1,138 @@ +// SPDX-License-Identifier: GPL-2.0-only and MIT + +/* + * Copyright 2024 NXP + */ + +mipi1_subsys: bus@57220000 { + compatible = "simple-bus"; + interrupt-parent = <&irqsteer_mipi1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x57220000 0x0 0x57220000 0x10000>; + + irqsteer_mipi1: interrupt-controller@57220000 { + compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer"; + reg = <0x57220000 0x1000>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + interrupt-parent = <&gic>; + #interrupt-cells = <1>; + clocks = <&mipi1_lis_lpcg IMX_LPCG_CLK_0>; + clock-names = "ipg"; + power-domains = <&pd IMX_SC_R_MIPI_1>; + fsl,channel = <0>; + fsl,num-irqs = <32>; + }; + + mipi1_lis_lpcg: clock-controller@57223000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x57223000 0x4>; + #clock-cells = <1>; + clocks = <&dsi_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>; + clock-output-names = "mipi1_lis_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_MIPI_1>; + }; + + mipi1_pwm_lpcg: clock-controller@5722300c { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5722300c 0x4>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_MIPI_1_PWM_0 IMX_SC_PM_CLK_PER>, + <&dsi_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "mipi1_pwm_lpcg_clk", + "mipi1_pwm_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_MIPI_1_PWM_0>; + }; + + mipi1_i2c0_lpcg_clk: clock-controller@5722301c { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5722301c 0x4>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_MIPI_1_I2C_0 IMX_SC_PM_CLK_MISC2>; + clock-indices = <IMX_LPCG_CLK_0>; + clock-output-names = "mipi1_i2c0_lpcg_clk"; + power-domains = <&pd IMX_SC_R_MIPI_1_I2C_0>; + }; + + mipi1_i2c0_lpcg_ipg_clk: clock-controller@57223014 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x57223014 0x4>; + #clock-cells = <1>; + clocks = <&mipi1_i2c0_lpcg_ipg_s_clk IMX_LPCG_CLK_0>; + clock-indices = <IMX_LPCG_CLK_0>; + clock-output-names = "mipi1_i2c0_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_MIPI_1_I2C_0>; + }; + + mipi1_i2c0_lpcg_ipg_s_clk: clock-controller@57223018 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x57223018 0x4>; + #clock-cells = <1>; + clocks = <&dsi_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>; + clock-output-names = "mipi1_i2c0_lpcg_ipg_s_clk"; + power-domains = <&pd IMX_SC_R_MIPI_1_I2C_0>; + }; + + mipi1_i2c1_lpcg_ipg_clk: clock-controller@57223024 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x57223024 0x4>; + #clock-cells = <1>; + clocks = <&mipi1_i2c1_lpcg_ipg_s_clk IMX_LPCG_CLK_0>; + clock-indices = <IMX_LPCG_CLK_0>; + clock-output-names = "mipi1_i2c1_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_MIPI_1_I2C_1>; + }; + + mipi1_i2c1_lpcg_ipg_s_clk: clock-controller@57223028 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x57223028 0x4>; + #clock-cells = <1>; + clocks = <&dsi_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>; + clock-output-names = "mipi1_i2c1_lpcg_ipg_s_clk"; + power-domains = <&pd IMX_SC_R_MIPI_1_I2C_1>; + }; + + mipi1_i2c1_lpcg_clk: clock-controller@5722302c { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5722302c 0x4>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_MIPI_1_I2C_1 IMX_SC_PM_CLK_MISC2>; + clock-indices = <IMX_LPCG_CLK_0>; + clock-output-names = "mipi1_i2c1_lpcg_clk"; + power-domains = <&pd IMX_SC_R_MIPI_1_I2C_1>; + }; + + pwm_mipi1: pwm@57224000 { + compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm"; + reg = <0x57224000 0x1000>; + clocks = <&mipi1_pwm_lpcg IMX_LPCG_CLK_4>, + <&mipi1_pwm_lpcg IMX_LPCG_CLK_0>; + clock-names = "ipg", "per"; + assigned-clocks = <&clk IMX_SC_R_MIPI_1_PWM_0 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <24000000>; + #pwm-cells = <3>; + power-domains = <&pd IMX_SC_R_MIPI_1_PWM_0>; + status = "disabled"; + }; + + i2c0_mipi1: i2c@57226000 { + compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x57226000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <8>; + interrupt-parent = <&irqsteer_mipi1>; + clocks = <&mipi1_i2c0_lpcg_clk IMX_LPCG_CLK_0>, + <&mipi1_i2c0_lpcg_ipg_clk IMX_LPCG_CLK_0>; + clock-names = "per", "ipg"; + assigned-clocks = <&mipi1_i2c0_lpcg_clk IMX_LPCG_CLK_0>; + assigned-clock-rates = <24000000>; + power-domains = <&pd IMX_SC_R_MIPI_1_I2C_0>; + status = "disabled"; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8dx-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8dx-colibri.dtsi index 66b0fcc6687d..4d1ad052c5b6 100644 --- a/arch/arm64/boot/dts/freescale/imx8dx-colibri.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8dx-colibri.dtsi @@ -9,3 +9,14 @@ / { model = "Toradex Colibri iMX8DX Module"; }; + +&thermal_zones { + pmic-thermal { + cooling-maps { + map0 { + cooling-device = <&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts index 1a74ac3ee4ee..4caaecc19227 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts @@ -722,12 +722,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpspi3>; status = "okay"; - - spidev0: spi@0 { - reg = <0>; - compatible = "rohm,dh2228fv"; - spi-max-frequency = <30000000>; - }; }; &iomuxc { diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi index 6086dae2e5fb..ea1d5b9c6bae 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi @@ -56,6 +56,20 @@ enable-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>; }; + reg_1v5: regulator-1v5 { + compatible = "regulator-fixed"; + regulator-name = "1V5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + reg_audio: regulator-audio { compatible = "regulator-fixed"; regulator-name = "3v3_aud"; @@ -187,6 +201,8 @@ assigned-clock-parents = <&clk IMX8MM_CLK_24M>; assigned-clock-rates = <24000000>; AVDD-supply = <®_camera>; /* 2.8v */ + DVDD-supply = <®_1v5>; + DOVDD-supply = <®_1v8>; powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts index 905c98cb080d..97ff1ddd6318 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts @@ -62,8 +62,8 @@ compatible = "adi,adv7535"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hdmi_bridge>; - reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>; - reg-names = "main", "cec", "edid", "packet"; + reg = <0x3d>, <0x3e>, <0x3c>, <0x3f>; + reg-names = "main", "edid", "cec", "packet"; adi,dsi-lanes = <4>; avdd-supply = <®_hdmi>; a2vdd-supply = <®_hdmi>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts index b1f2beb40a98..472c584fb3bd 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts @@ -168,7 +168,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec1>; phy-mode = "rgmii-id"; - phy-handle = <&fec1_phy>; + phy-handle = <&fec1_phy_bcm>; phy-supply = <&buck4_reg>; fsl,magic-packet; status = "okay"; @@ -178,7 +178,7 @@ #size-cells = <0>; /* Atheros AR8031 PHY */ - fec1_phy: ethernet-phy@0 { + fec1_phy_ath: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>; /* @@ -191,6 +191,7 @@ reset-deassert-us = <10000>; qca,keep-pll-enabled; vddio-supply = <&vddio>; + status = "disabled"; vddio: vddio-regulator { regulator-name = "VDDIO"; @@ -202,6 +203,20 @@ regulator-name = "VDDH"; }; }; + + /* Broadcom BCM54213PE PHY */ + fec1_phy_bcm: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + /* + * Dedicated ENET_INT# and ENET_WOL# signals are + * unused, the PHY does not provide cable detect + * interrupt. + */ + reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emtop-baseboard.dts b/arch/arm64/boot/dts/freescale/imx8mm-emtop-baseboard.dts index 1c4e4d175989..7d2cb74c64ee 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-emtop-baseboard.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-emtop-baseboard.dts @@ -11,5 +11,53 @@ model = "Emtop Embedded Solutions i.MX8M Mini Baseboard V1"; compatible = "ees,imx8mm-emtop-baseboard", "ees,imx8mm-emtop-som", "fsl,imx8mm"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <4>; + reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + vddio-supply = <&vddio>; + + vddio: vddio-regulator { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; +}; +&iomuxc { + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19 + >; + }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi index 930e14fec423..5f8336217bb8 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi @@ -180,12 +180,21 @@ }; }; + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + + spdif_in: spdif-in { + compatible = "linux,spdif-dir"; + #sound-dai-cells = <0>; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "imx-spdif"; - spdif-controller = <&spdif1>; - spdif-out; - spdif-in; + audio-cpu = <&spdif1>; + audio-codec = <&spdif_out>, <&spdif_in>; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts index 92e62fe31929..5eacbd9611ee 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts @@ -220,6 +220,7 @@ }; &rv3028 { + aux-voltage-chargeable = <1>; trickle-resistor-ohms = <3000>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso index 353ace3601dc..78f4e8d5814d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso +++ b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso @@ -14,16 +14,11 @@ /dts-v1/; /plugin/; -&{/} { - compatible = "phytec,imx8mm-phygate-tauri-l"; - -}; - &gpio3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio3_hog>; - uart4_rs485_en { + uart4-rs485-en-hog { gpio-hog; gpios = <20 GPIO_ACTIVE_HIGH>; output-low; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso index 8a75d6783ad2..66288948bdd3 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso +++ b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso @@ -15,16 +15,11 @@ /dts-v1/; /plugin/; -&{/} { - compatible = "phytec,imx8mm-phygate-tauri-l"; - -}; - &gpio3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio3_hog>; - uart4_rs485_en { + uart4-rs485-en-hog { gpio-hog; gpios = <20 GPIO_ACTIVE_HIGH>; output-high; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rts-cts.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rts-cts.dtso index 107f743fbb1c..4719f5fbad03 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rts-cts.dtso +++ b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rts-cts.dtso @@ -14,12 +14,6 @@ /dts-v1/; /plugin/; - -&{/} { - compatible = "phytec,imx8mm-phygate-tauri-l"; - -}; - &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts index ba6ce3c7f477..c3835b2d860a 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts @@ -215,6 +215,7 @@ /* RTC */ &rv3028 { + aux-voltage-chargeable = <1>; trickle-resistor-ohms = <3000>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi index ca0205b9019e..8f58c84e14c8 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi @@ -83,7 +83,6 @@ }; &i2c1 { - clock-frequency = <100000>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; pinctrl-1 = <&pinctrl_i2c1_gpio>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi index d7830df5b6f9..cdfacbc35db5 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi @@ -8,7 +8,6 @@ / { model = "Variscite VAR-SOM-MX8MM module"; - compatible = "variscite,var-som-mx8mm", "fsl,imx8mm"; chosen { stdout-path = &uart4; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dtso index 4eaf8aabcbff..c09aa80d2ba2 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dtso +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dtso @@ -13,6 +13,20 @@ &{/} { compatible = "gw,imx8mm-gw72xx-0x", "fsl,imx8mm"; + reg_vana: regulator-2p8v { + compatible = "regulator-fixed"; + regulator-name = "2P8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + reg_vddl: regulator-1p2v { + compatible = "regulator-fixed"; + regulator-name = "1P2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + reg_cam: regulator-cam { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_cam>; @@ -45,6 +59,8 @@ reg = <0x10>; clocks = <&cam24m>; VDIG-supply = <®_cam>; + VANA-supply = <®_vana>; + VDDL-supply = <®_vddl>; port { /* MIPI CSI-2 bus endpoint */ diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso index f6ad1a4b8b66..bb2056746f8c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso @@ -15,12 +15,8 @@ /dts-v1/; /plugin/; -&{/} { - compatible = "gw,imx8mm-gw72xx-0x"; -}; - &gpio4 { - rs485_en { + rs485-en-hog { gpio-hog; gpios = <0 GPIO_ACTIVE_HIGH>; output-low; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs422.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs422.dtso index c3cd9f2b0db3..45ac8bdce869 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs422.dtso +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs422.dtso @@ -18,19 +18,15 @@ /dts-v1/; /plugin/; -&{/} { - compatible = "gw,imx8mm-gw72xx-0x"; -}; - &gpio4 { - rs485_en { + rs485-en-hog { gpio-hog; gpios = <0 GPIO_ACTIVE_HIGH>; output-high; line-name = "rs485_en"; }; - rs485_hd { + rs485-hd-hog { gpio-hog; gpios = <2 GPIO_ACTIVE_HIGH>; output-low; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs485.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs485.dtso index cc0a287226ab..30aa620d7004 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs485.dtso +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs485.dtso @@ -18,19 +18,15 @@ /dts-v1/; /plugin/; -&{/} { - compatible = "gw,imx8mm-gw72xx-0x"; -}; - &gpio4 { - rs485_en { + rs485-en-hog { gpio-hog; gpios = <0 GPIO_ACTIVE_HIGH>; output-high; line-name = "rs485_en"; }; - rs485_hd { + rs485-hd-hog { gpio-hog; gpios = <2 GPIO_ACTIVE_HIGH>; output-high; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-imx219.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-imx219.dtso index f3ece4b7fbbd..cfc014eb038d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-imx219.dtso +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-imx219.dtso @@ -13,6 +13,20 @@ &{/} { compatible = "gw,imx8mm-gw73xx-0x", "fsl,imx8mm"; + reg_vana: regulator-2p8v { + compatible = "regulator-fixed"; + regulator-name = "2P8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + reg_vddl: regulator-1p2v { + compatible = "regulator-fixed"; + regulator-name = "1P2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + reg_cam: regulator-cam { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_cam>; @@ -45,6 +59,8 @@ reg = <0x10>; clocks = <&cam24m>; VDIG-supply = <®_cam>; + VANA-supply = <®_vana>; + VDDL-supply = <®_vddl>; port { /* MIPI CSI-2 bus endpoint */ diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso index 1f8ea20dfafc..9bee7159a67b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso @@ -20,7 +20,7 @@ }; &gpio4 { - rs485_en { + rs485-en-hog { gpio-hog; gpios = <0 GPIO_ACTIVE_HIGH>; output-low; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs422.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs422.dtso index 3e6404340d52..e98f50bcec57 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs422.dtso +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs422.dtso @@ -23,14 +23,14 @@ }; &gpio4 { - rs485_en { + rs485-en-hog { gpio-hog; gpios = <0 GPIO_ACTIVE_HIGH>; output-high; line-name = "rs485_en"; }; - rs485_hd { + rs485-hd-hog { gpio-hog; gpios = <2 GPIO_ACTIVE_HIGH>; output-low; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs485.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs485.dtso index 2c71ab9854cb..e875ff4637bd 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs485.dtso +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs485.dtso @@ -23,14 +23,14 @@ }; &gpio4 { - rs485_en { + rs485-en-hog { gpio-hog; gpios = <0 GPIO_ACTIVE_HIGH>; output-high; line-name = "rs485_en"; }; - rs485_hd { + rs485-hd-hog { gpio-hog; gpios = <2 GPIO_ACTIVE_HIGH>; output-high; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7905-0x.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw75xx-0x.dts index 914753f062cd..04f06a55da5c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7905-0x.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw75xx-0x.dts @@ -7,11 +7,11 @@ #include "imx8mm.dtsi" #include "imx8mm-venice-gw700x.dtsi" -#include "imx8mm-venice-gw7905.dtsi" +#include "imx8mm-venice-gw75xx.dtsi" / { - model = "Gateworks Venice GW7905-0x i.MX8MM Development Kit"; - compatible = "gateworks,imx8mm-gw7905-0x", "fsl,imx8mm"; + model = "Gateworks Venice GW75xx-0x i.MX8MM Development Kit"; + compatible = "gateworks,imx8mm-gw75xx-0x", "fsl,imx8mm"; chosen { stdout-path = &uart2; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7905.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw75xx.dtsi index 5eb92005195c..5eb92005195c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7905.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw75xx.dtsi diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts index 136cb30df03a..35ae0faa815b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts @@ -364,6 +364,8 @@ interrupts = <16 IRQ_TYPE_EDGE_FALLING>; interrupt-controller; #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; adc { compatible = "gw,gsc-adc"; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts index 1d56f2a6c06a..c11260c26d0b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts @@ -314,6 +314,8 @@ interrupts = <6 IRQ_TYPE_EDGE_FALLING>; interrupt-controller; #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; adc { compatible = "gw,gsc-adc"; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts index 45470160f98f..db1737bf637d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts @@ -280,6 +280,8 @@ interrupts = <26 IRQ_TYPE_EDGE_FALLING>; interrupt-controller; #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; adc { compatible = "gw,gsc-adc"; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts index ef951bc9f0dd..05489a31e7fd 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts @@ -330,6 +330,8 @@ interrupts = <26 IRQ_TYPE_EDGE_FALLING>; interrupt-controller; #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; adc { compatible = "gw,gsc-adc"; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi index 20018ee2c803..77d14ea459e5 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi @@ -40,6 +40,20 @@ }; }; + reg_1v5: regulator-1v5 { + compatible = "regulator-fixed"; + regulator-name = "1V5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + reg_audio: regulator-audio { compatible = "regulator-fixed"; regulator-name = "3v3_aud"; @@ -158,6 +172,8 @@ assigned-clock-parents = <&clk IMX8MN_CLK_24M>; assigned-clock-rates = <24000000>; AVDD-supply = <®_camera>; /* 2.8v */ + DVDD-supply = <®_1v5>; + DOVDD-supply = <®_1v8>; powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts index bbd80896db96..1df5ceb11387 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts @@ -62,8 +62,8 @@ compatible = "adi,adv7535"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hdmi_bridge>; - reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>; - reg-names = "main", "cec", "edid", "packet"; + reg = <0x3d>, <0x3e>, <0x3c>, <0x3f>; + reg-names = "main", "edid", "cec", "packet"; adi,dsi-lanes = <4>; avdd-supply = <®_hdmi>; a2vdd-supply = <®_hdmi>; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi index 9e0259ddf4bc..33d73f3dc187 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi @@ -124,12 +124,21 @@ "Line Out Jack", "LINEVOUTR"; }; + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + + spdif_in: spdif-in { + compatible = "linux,spdif-dir"; + #sound-dai-cells = <0>; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "imx-spdif"; - spdif-controller = <&spdif1>; - spdif-out; - spdif-in; + audio-cpu = <&spdif1>; + audio-codec = <&spdif_out>, <&spdif_in>; }; sound-micfil { diff --git a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts index 72004ab6bda5..0b1fa04f1d67 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts @@ -312,6 +312,8 @@ interrupts = <6 IRQ_TYPE_EDGE_FALLING>; interrupt-controller; #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; adc { compatible = "gw,gsc-adc"; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts index cc9b81d46188..31c33acb560c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts @@ -105,6 +105,17 @@ }; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector: endpoint { + remote-endpoint = <&hdmi_to_connector>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -282,6 +293,26 @@ }; }; +&hdmi_tx { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi>; + status = "okay"; + + ports { + port@1 { + reg = <1>; + + hdmi_to_connector:endpoint { + remote-endpoint = <&hdmi_connector>; + }; + }; + }; +}; + +&hdmi_tx_phy { + status = "okay"; +}; + &i2c2 { clock-frequency = <384000>; pinctrl-names = "default"; @@ -344,6 +375,10 @@ }; }; +&hdmi_pvi { + status = "okay"; +}; + &i2c3 { /* Connected to USB Hub */ usb-typec@52 { @@ -464,6 +499,10 @@ status = "okay"; }; +&lcdif3 { + status = "okay"; +}; + &micfil { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pdm>; @@ -646,6 +685,15 @@ >; }; + pinctrl_hdmi: hdmigrp { + fsl,pins = < + MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x400001c2 + MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x400001c2 + MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x40000010 + MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x40000010 + >; + }; + pinctrl_i2c2: i2c2grp { fsl,pins = < MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2 diff --git a/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts index 7e1b58dbe23a..d0fc5977258f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts @@ -59,6 +59,18 @@ pwms = <&pwm4 0 83 0>; }; + hdmi-connector { + compatible = "hdmi-connector"; + label = "J17"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_out>; + }; + }; + }; + panel: panel { /* Compatible string is filled in by panel board DT Overlay. */ backlight = <&backlight>; @@ -311,6 +323,33 @@ "", "SPI3_CS#", "", "", "", "", "", ""; }; +&hdmi_pvi { + status = "okay"; +}; + +&hdmi_tx { + ddc-i2c-bus = <&i2c5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi>; + status = "okay"; + + ports { + port@1 { + hdmi_tx_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; +}; + +&hdmi_tx_phy { + status = "okay"; +}; + +&lcdif3 { + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default", "gpio"; @@ -499,7 +538,6 @@ }; &sai3 { - #clock-cells = <0>; #sound-dai-cells = <0>; assigned-clocks = <&clk IMX8MP_CLK_SAI3>; assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>; @@ -682,6 +720,13 @@ >; }; + pinctrl_hdmi: hdmi-grp { + fsl,pins = < + MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x154 + MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x154 + >; + }; + pinctrl_hog_feature: hog-feature-grp { fsl,pins = < /* GPIO5_IO03 */ diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index 938347704136..d26930f1a9e9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts @@ -56,6 +56,18 @@ <0x1 0x00000000 0 0xc0000000>; }; + native-hdmi-connector { + compatible = "hdmi-connector"; + label = "HDMI OUT"; + type = "a"; + + port { + hdmi_in: endpoint { + remote-endpoint = <&hdmi_tx_out>; + }; + }; + }; + pcie0_refclk: pcie0-refclk { compatible = "fixed-clock"; #clock-cells = <0>; @@ -408,6 +420,28 @@ status = "disabled";/* can2 pin conflict with pdm */ }; +&hdmi_pvi { + status = "okay"; +}; + +&hdmi_tx { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi>; + status = "okay"; + + ports { + port@1 { + hdmi_tx_out: endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; +}; + +&hdmi_tx_phy { + status = "okay"; +}; + &i2c1 { clock-frequency = <400000>; pinctrl-names = "default"; @@ -604,6 +638,10 @@ status = "okay"; }; +&lcdif3 { + status = "okay"; +}; + &micfil { #sound-dai-cells = <0>; pinctrl-names = "default"; @@ -858,6 +896,14 @@ >; }; + pinctrl_hdmi: hdmigrp { + fsl,pins = < + MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x1c2 + MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x1c2 + MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x10 + >; + }; + pinctrl_hog: hoggrp { fsl,pins = < MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x40000010 diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts index 00a240484c25..50debe821c42 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts @@ -6,6 +6,7 @@ /dts-v1/; +#include <dt-bindings/phy/phy-imx8-pcie.h> #include <dt-bindings/leds/leds-pca9532.h> #include <dt-bindings/pwm/pwm.h> #include "imx8mp-phycore-som.dtsi" @@ -43,6 +44,15 @@ }; }; + reg_vcc_5v_sw: regulator-vcc-5v-sw { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "VCC_5V_SW"; + }; + reg_can1_stby: regulator-can1-stby { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -103,6 +113,22 @@ }; }; +/* TPM */ +&ecspi1 { + #address-cells = <1>; + #size-cells = <0>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + tpm: tpm@0 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + reg = <0>; + spi-max-frequency = <38000000>; + }; +}; + &eqos { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_eqos>; @@ -155,6 +181,7 @@ compatible = "atmel,24c02"; reg = <0x51>; pagesize = <16>; + vcc-supply = <®_vcc_3v3_sw>; }; leds@62 { @@ -195,6 +222,23 @@ status = "okay"; }; +&pcie_phy { + clocks = <&hsio_blk_ctrl>; + clock-names = "ref"; + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>; + fsl,clkreq-unsupported; + status = "okay"; +}; + +/* Mini PCIe */ +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>; + vpcie-supply = <®_vcc_3v3_sw>; + status = "okay"; +}; + &pwm3 { status = "okay"; pinctrl-names = "default"; @@ -206,6 +250,7 @@ pinctrl-0 = <&pinctrl_rtc>; interrupt-parent = <&gpio4>; interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + aux-voltage-chargeable = <1>; wakeup-source; trickle-resistor-ohms = <3000>; }; @@ -234,6 +279,7 @@ /* USB2 4-port USB3.0 HUB */ &usb3_phy1 { + vbus-supply = <®_vcc_5v_sw>; status = "okay"; }; @@ -267,7 +313,9 @@ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_pins>; pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_pins>; cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + disable-wp; vmmc-supply = <®_usdhc2_vmmc>; + vqmmc-supply = <&ldo5>; bus-width = <4>; status = "okay"; }; @@ -300,6 +348,15 @@ }; &iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x80 + MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x80 + MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x80 + MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x00 + >; + }; + pinctrl_eqos: eqosgrp { fsl,pins = < MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x2 @@ -366,6 +423,15 @@ >; }; + pinctrl_pcie0: pcie0grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08 0x40 + MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x60 + MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x60 /* open drain, pull up */ + MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x40 + >; + }; + pinctrl_pwm3: pwm3grp { fsl,pins = < MX8MP_IOMUXC_SPDIF_TX__PWM3_OUT 0x12 diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phycore-no-eth.dtso b/arch/arm64/boot/dts/freescale/imx8mp-phycore-no-eth.dtso new file mode 100644 index 000000000000..5f0278bf61ee --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-phycore-no-eth.dtso @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2024 PHYTEC Messtechnik GmbH + * Author: Cem Tenruh <c.tenruh@phytec.de> + */ + +/dts-v1/; +/plugin/; + +ðphy1 { + status = "disabled"; +}; + +&fec { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi index e6ffa6a6b68b..a5ecdca8bc0e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi @@ -20,6 +20,15 @@ device_type = "memory"; reg = <0x0 0x40000000 0 0x80000000>; }; + + reg_vdd_io: regulator-vdd-io { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "VDD_IO"; + }; }; &A53_0 { @@ -170,6 +179,7 @@ compatible = "atmel,24c32"; reg = <0x51>; pagesize = <32>; + vcc-supply = <®_vdd_io>; }; rv3028: rtc@52 { diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts new file mode 100644 index 000000000000..36d3eb865202 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2024 Variscite Ltd. + */ + +#include "imx8mp-var-som.dtsi" + +/ { + model = "Variscite VAR-SOM-MX8M-PLUS on Symphony-Board"; + compatible = "variscite,var-som-mx8mp-symphony", "variscite,var-som-mx8mp", "fsl,imx8mp"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi new file mode 100644 index 000000000000..b2ac2583a592 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi @@ -0,0 +1,359 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2024 Variscite Ltd. + * + * Author: Tarang Raval <tarang.raval@siliconsignals.io> + */ + +/dts-v1/; + +#include <dt-bindings/phy/phy-imx8-pcie.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/usb/pd.h> +#include "imx8mp.dtsi" + +/ { + model = "Variscite VAR-SOM-MX8M Plus module"; + + chosen { + stdout-path = &uart2; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led-0 { + function = LED_FUNCTION_POWER; + gpios = <&pca9534 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0xc0000000>, + <0x1 0x00000000 0 0xc0000000>; + }; + + + reg_usdhc2_vmmc: regulator-usdhc2-vmmc { + compatible = "regulator-fixed"; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <100>; + off-on-delay-us = <12000>; + }; +}; + +&A53_0 { + cpu-supply = <&buck2>; +}; + +&A53_1 { + cpu-supply = <&buck2>; +}; + +&A53_2 { + cpu-supply = <&buck2>; +}; + +&A53_3 { + cpu-supply = <&buck2>; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic@25 { + compatible = "nxp,pca9450c"; + reg = <0x25>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio5>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + + regulators { + buck1: BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + buck2: BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + }; + + buck4: BUCK4 { + regulator-name = "BUCK4"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5: BUCK5 { + regulator-name = "BUCK5"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6: BUCK6 { + regulator-name = "BUCK6"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2: LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3: LDO3 { + regulator-name = "LDO3"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4: LDO4 { + regulator-name = "LDO4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo5: LDO5 { + regulator-name = "LDO5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + /* GPIO expander */ + pca9534: gpio@20 { + compatible = "nxp,pca9534"; + reg = <0x20>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pca9534>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio1>; + interrupts = <15 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + + usb3-sata-sel-hog { + gpio-hog; + gpios = <4 0>; + output-low; + line-name = "usb3_sata_sel"; + }; + }; +}; + +/* Console */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +/* SD-card */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + bus-width = <4>; + status = "okay"; +}; + +/* eMMC */ +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MP_IOMUXC_SD1_DATA4__I2C1_SCL 0x400001c2 + MX8MP_IOMUXC_SD1_DATA5__I2C1_SDA 0x400001c2 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c2 + MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c2 + >; + }; + + pinctrl_pca9534: pca9534grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 0xc0 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04 0x1c0 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x40 + MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x40 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2-gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x1c4 + MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x10 + MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0xc0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx-imx219.dtso b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx-imx219.dtso index edf22ff549a4..7d9fcdee58a7 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx-imx219.dtso +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx-imx219.dtso @@ -11,7 +11,19 @@ /plugin/; &{/} { - compatible = "gw,imx8mp-gw74xx", "fsl,imx8mp"; + reg_vana: regulator-2p8v { + compatible = "regulator-fixed"; + regulator-name = "2P8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + reg_vddl: regulator-1p2v { + compatible = "regulator-fixed"; + regulator-name = "1P2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; reg_cam: regulator-cam { pinctrl-names = "default"; @@ -41,6 +53,8 @@ reg = <0x10>; clocks = <&cam24m>; VDIG-supply = <®_cam>; + VANA-supply = <®_vana>; + VDDL-supply = <®_vddl>; port { /* MIPI CSI-2 bus endpoint */ diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw7905-2x.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw75xx-2x.dts index 4a1bbbbe19e6..7ca68df9e516 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw7905-2x.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw75xx-2x.dts @@ -7,11 +7,11 @@ #include "imx8mp.dtsi" #include "imx8mp-venice-gw702x.dtsi" -#include "imx8mp-venice-gw7905.dtsi" +#include "imx8mp-venice-gw75xx.dtsi" / { - model = "Gateworks Venice GW7905-2x i.MX8MP Development Kit"; - compatible = "gateworks,imx8mp-gw7905-2x", "fsl,imx8mp"; + model = "Gateworks Venice GW75xx-2x i.MX8MP Development Kit"; + compatible = "gateworks,imx8mp-gw75xx-2x", "fsl,imx8mp"; chosen { stdout-path = &uart2; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw7905.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw75xx.dtsi index 0d40cb0f05f6..0d40cb0f05f6 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw7905.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw75xx.dtsi diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi index fbcd93e33aea..da8902c5f7e5 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi @@ -65,6 +65,11 @@ }; }; +/* Verdin HDMI_1 Audio */ +&aud2htx { + status = "okay"; +}; + &backlight { power-supply = <®_3p3v>; }; @@ -219,6 +224,11 @@ status = "okay"; }; +/* Verdin HDMI_1 Audio */ +&sound_hdmi { + status = "okay"; +}; + /* Verdin UART_1 */ &uart1 { status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi index 09733fea036d..a38e7c947a42 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi @@ -64,6 +64,11 @@ }; }; +/* Verdin HDMI_1 Audio */ +&aud2htx { + status = "okay"; +}; + &backlight { power-supply = <®_3p3v>; }; @@ -215,6 +220,11 @@ status = "okay"; }; +/* Verdin HDMI_1 Audio */ +&sound_hdmi { + status = "okay"; +}; + /* Verdin UART_1, connector X50 through RS485 transceiver */ &uart1 { linux,rs485-enabled-at-boot-time; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-mallow.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-mallow.dtsi index 3a40338cf2d8..11cf3bdc95c4 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-mallow.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-mallow.dtsi @@ -62,6 +62,11 @@ }; }; +/* Verdin HDMI_1 Audio */ +&aud2htx { + status = "okay"; +}; + &backlight { power-supply = <®_3p3v>; }; @@ -182,6 +187,11 @@ vin-supply = <®_3p3v>; }; +/* Verdin HDMI_1 Audio */ +&sound_hdmi { + status = "okay"; +}; + /* Verdin UART_1 */ &uart1 { status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi index efcab00c0142..cae06cb67cd3 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi @@ -75,7 +75,6 @@ &usdhc1 { bus-width = <4>; keep-power-in-suspend; - max-frequency = <100000000>; non-removable; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_wifi_ctrl>; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi index 533b7fe218ce..cc389cda2af2 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi @@ -85,6 +85,11 @@ }; }; +/* Verdin HDMI_1 Audio */ +&aud2htx { + status = "okay"; +}; + &backlight { power-supply = <®_3p3v>; }; @@ -192,6 +197,11 @@ vin-supply = <®_3p3v>; }; +/* Verdin HDMI_1 Audio */ +&sound_hdmi { + status = "okay"; +}; + /* Verdin UART_1 */ &uart1 { status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi index d23a3942174d..a19ad5ee7f79 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi @@ -77,6 +77,14 @@ }; }; + sound_hdmi: sound-hdmi { + compatible = "fsl,imx-audio-hdmi"; + model = "audio-hdmi"; + audio-cpu = <&aud2htx>; + hdmi-out; + status = "disabled"; + }; + /* Carrier Board Supplies */ reg_1p8v: regulator-1p8v { compatible = "regulator-fixed"; diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index 603dfe80216f..f3531cfb0d79 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -1673,6 +1673,50 @@ }; }; + isp_0: isp@32e10000 { + compatible = "fsl,imx8mp-isp"; + reg = <0x32e10000 0x10000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>, + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; + clock-names = "isp", "aclk", "hclk"; + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>; + fsl,blk-ctrl = <&media_blk_ctrl 0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + }; + }; + }; + + isp_1: isp@32e20000 { + compatible = "fsl,imx8mp-isp"; + reg = <0x32e20000 0x10000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>, + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; + clock-names = "isp", "aclk", "hclk"; + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>; + fsl,blk-ctrl = <&media_blk_ctrl 1>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + }; + }; + }; + dewarp: dwe@32e30000 { compatible = "nxp,imx8mp-dw100"; reg = <0x32e30000 0x10000>; @@ -1687,7 +1731,7 @@ compatible = "fsl,imx8mp-mipi-csi2", "fsl,imx8mm-mipi-csi2"; reg = <0x32e40000 0x10000>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <266000000>; + clock-frequency = <250000000>; clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>, <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>, <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>, @@ -1695,9 +1739,8 @@ clock-names = "pclk", "wrap", "phy", "axi"; assigned-clocks = <&clk IMX8MP_CLK_MEDIA_CAM1_PIX>, <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>; - assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>, + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_250M>, <&clk IMX8MP_CLK_24M>; - assigned-clock-rates = <266000000>; power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_1>; status = "disabled"; @@ -1723,7 +1766,7 @@ compatible = "fsl,imx8mp-mipi-csi2", "fsl,imx8mm-mipi-csi2"; reg = <0x32e50000 0x10000>; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <266000000>; + clock-frequency = <250000000>; clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>, <&clk IMX8MP_CLK_MEDIA_CAM2_PIX_ROOT>, <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>, @@ -1731,9 +1774,8 @@ clock-names = "pclk", "wrap", "phy", "axi"; assigned-clocks = <&clk IMX8MP_CLK_MEDIA_CAM2_PIX>, <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>; - assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>, + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_250M>, <&clk IMX8MP_CLK_24M>; - assigned-clock-rates = <266000000>; power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_2>; status = "disabled"; @@ -1871,17 +1913,26 @@ clock-names = "apb", "axi", "cam1", "cam2", "disp1", "disp2", "isp", "phy"; + /* + * The ISP maximum frequency is 400MHz in normal mode + * and 500MHz in overdrive mode. The 400MHz operating + * point hasn't been successfully tested yet, so set + * IMX8MP_CLK_MEDIA_ISP to 500MHz for the time being. + */ assigned-clocks = <&clk IMX8MP_CLK_MEDIA_AXI>, <&clk IMX8MP_CLK_MEDIA_APB>, <&clk IMX8MP_CLK_MEDIA_DISP1_PIX>, <&clk IMX8MP_CLK_MEDIA_DISP2_PIX>, + <&clk IMX8MP_CLK_MEDIA_ISP>, <&clk IMX8MP_VIDEO_PLL1>; assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>, <&clk IMX8MP_SYS_PLL1_800M>, <&clk IMX8MP_VIDEO_PLL1_OUT>, - <&clk IMX8MP_VIDEO_PLL1_OUT>; + <&clk IMX8MP_VIDEO_PLL1_OUT>, + <&clk IMX8MP_SYS_PLL2_500M>; assigned-clock-rates = <500000000>, <200000000>, - <0>, <0>, <1039500000>; + <0>, <0>, <500000000>, + <1039500000>; #power-domain-cells = <1>; lvds_bridge: bridge@5c { diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts index 7507548cdb16..a87d0692c3bb 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts @@ -125,19 +125,33 @@ }; }; + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + + spdif_in: spdif-in { + compatible = "linux,spdif-dir"; + #sound-dai-cells = <0>; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "imx-spdif"; - spdif-controller = <&spdif1>; - spdif-out; - spdif-in; + audio-cpu = <&spdif1>; + audio-codec = <&spdif_out>, <&spdif_in>; + }; + + hdmi_arc_in: hdmi-arc-in { + compatible = "linux,spdif-dir"; + #sound-dai-cells = <0>; }; sound-hdmi-arc { compatible = "fsl,imx-audio-spdif"; model = "imx-hdmi-arc"; - spdif-controller = <&spdif2>; - spdif-in; + audio-cpu = <&spdif2>; + audio-codec = <&hdmi_arc_in>; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts index 778741dbbb33..62203eed6a6c 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts @@ -6,6 +6,7 @@ /dts-v1/; +#include <dt-bindings/usb/pd.h> #include "imx8qm.dtsi" / { @@ -31,6 +32,99 @@ reg = <0x00000000 0x80000000 0 0x40000000>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + vdev0vring0: memory@90000000 { + reg = <0 0x90000000 0 0x8000>; + no-map; + }; + + vdev0vring1: memory@90008000 { + reg = <0 0x90008000 0 0x8000>; + no-map; + }; + + vdev1vring0: memory@90010000 { + reg = <0 0x90010000 0 0x8000>; + no-map; + }; + + vdev1vring1: memory@90018000 { + reg = <0 0x90018000 0 0x8000>; + no-map; + }; + + rsc_table0: memory@900ff000 { + reg = <0 0x900ff000 0 0x1000>; + no-map; + }; + + vdev2vring0: memory@90100000 { + reg = <0 0x90100000 0 0x8000>; + no-map; + }; + + vdev2vring1: memory@90108000 { + reg = <0 0x90108000 0 0x8000>; + no-map; + }; + + vdev3vring0: memory@90110000 { + reg = <0 0x90110000 0 0x8000>; + no-map; + }; + + vdev3vring1: memory@90118000 { + reg = <0 0x90118000 0 0x8000>; + no-map; + }; + + rsc_table1: memory@901ff000 { + reg = <0 0x901ff000 0 0x1000>; + no-map; + }; + + vdevbuffer: memory@90400000 { + compatible = "shared-dma-pool"; + reg = <0 0x90400000 0 0x100000>; + no-map; + }; + }; + + lvds_backlight0: backlight-lvds0 { + compatible = "pwm-backlight"; + pwms = <&qm_pwm_lvds0 0 100000 0>; + brightness-levels = <0 100>; + num-interpolated-steps = <100>; + default-brightness-level = <80>; + }; + + lvds_backlight1: backlight-lvds1 { + compatible = "pwm-backlight"; + pwms = <&pwm_lvds1 0 100000 0>; + brightness-levels = <0 100>; + num-interpolated-steps = <100>; + default-brightness-level = <80>; + }; + + mux-controller { + compatible = "nxp,cbdtu02043", "gpio-sbu-mux"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_typec_mux>; + select-gpios = <&lsio_gpio4 6 GPIO_ACTIVE_LOW>; + enable-gpios = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>; + orientation-switch; + + port { + usb3_data_ss: endpoint { + remote-endpoint = <&typec_con_ss>; + }; + }; + }; + reg_usdhc2_vmmc: usdhc2-vmmc { compatible = "regulator-fixed"; regulator-name = "SD1_SPWR"; @@ -133,6 +227,37 @@ "LINPUT1", "Mic Jack", "Mic Jack", "MICB"; }; + + imx8qm-cm4-0 { + compatible = "fsl,imx8qm-cm4"; + clocks = <&clk_dummy>; + mbox-names = "tx", "rx", "rxdb"; + mboxes = <&lsio_mu5 0 1 + &lsio_mu5 1 1 + &lsio_mu5 3 1>; + memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>, + <&vdev1vring0>, <&vdev1vring1>, <&rsc_table0>; + power-domains = <&pd IMX_SC_R_M4_0_PID0>, <&pd IMX_SC_R_M4_0_MU_1A>; + + fsl,resource-id = <IMX_SC_R_M4_0_PID0>; + fsl,entry-address = <0x34fe0000>; + }; + + imx8qm-cm4-1 { + compatible = "fsl,imx8qm-cm4"; + clocks = <&clk_dummy>; + mbox-names = "tx", "rx", "rxdb"; + mboxes = <&lsio_mu6 0 1 + &lsio_mu6 1 1 + &lsio_mu6 3 1>; + memory-region = <&vdevbuffer>, <&vdev2vring0>, <&vdev2vring1>, + <&vdev3vring0>, <&vdev3vring1>, <&rsc_table1>; + power-domains = <&pd IMX_SC_R_M4_1_PID0>, <&pd IMX_SC_R_M4_1_MU_1A>; + + fsl,resource-id = <IMX_SC_R_M4_1_PID0>; + fsl,entry-address = <0x38fe0000>; + }; + }; &adc0 { @@ -212,6 +337,44 @@ compatible = "st,l3g4200d-gyro"; reg = <0x69>; }; + + ptn5110: tcpc@51 { + compatible = "nxp,ptn5110", "tcpci"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_typec>; + reg = <0x51>; + interrupt-parent = <&lsio_gpio4>; + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + status = "okay"; + + usb_con1: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "source"; + data-role = "dual"; + source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + typec_dr_sw: endpoint { + remote-endpoint = <&usb3_drd_sw>; + }; + }; + + port@1 { + reg = <1>; + typec_con_ss: endpoint { + remote-endpoint = <&usb3_data_ss>; + }; + }; + }; + }; + }; }; &i2c1 { @@ -241,6 +404,34 @@ }; }; +&i2c1_lvds0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lvds0_lpi2c1>; + clock-frequency = <100000>; + status = "okay"; +}; + +&i2c1_lvds1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lvds1_lpi2c1>; + clock-frequency = <100000>; + status = "okay"; +}; + +&i2c0_mipi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mipi0_lpi2c0>; + clock-frequency = <100000>; + status = "okay"; +}; + +&i2c0_mipi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mipi1_lpi2c0>; + clock-frequency = <100000>; + status = "okay"; +}; + &flexcan1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan1>; @@ -287,12 +478,6 @@ pinctrl-0 = <&pinctrl_lpspi2 &pinctrl_lpspi2_cs>; cs-gpios = <&lsio_gpio3 10 GPIO_ACTIVE_LOW>; status = "okay"; - - spidev0: spi@0 { - reg = <0>; - compatible = "rohm,dh2228fv"; - spi-max-frequency = <30000000>; - }; }; &lsio_mu5 { @@ -356,6 +541,18 @@ status = "okay"; }; +&qm_pwm_lvds0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_lvds0>; + status = "okay"; +}; + +&pwm_lvds1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_lvds1>; + status = "okay"; +}; + &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; @@ -376,6 +573,26 @@ status = "okay"; }; +&usb3_phy { + status = "okay"; +}; + +&usbotg3 { + status = "okay"; +}; + +&usbotg3_cdns3 { + dr_mode = "otg"; + usb-role-switch; + status = "okay"; + + port { + usb3_drd_sw: endpoint { + remote-endpoint = <&typec_dr_sw>; + }; + }; +}; + &sai0 { #sound-dai-cells = <0>; assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, @@ -501,6 +718,22 @@ >; }; + pinctrl_mipi0_lpi2c0: mipi0_lpi2c0grp { + fsl,pins = < + IMX8QM_MIPI_DSI0_I2C0_SCL_MIPI_DSI0_I2C0_SCL 0xc6000020 + IMX8QM_MIPI_DSI0_I2C0_SDA_MIPI_DSI0_I2C0_SDA 0xc6000020 + IMX8QM_MIPI_DSI0_GPIO0_01_LSIO_GPIO1_IO19 0x00000020 + >; + }; + + pinctrl_mipi1_lpi2c0: mipi1_lpi2c0grp { + fsl,pins = < + IMX8QM_MIPI_DSI1_I2C0_SCL_MIPI_DSI1_I2C0_SCL 0xc6000020 + IMX8QM_MIPI_DSI1_I2C0_SDA_MIPI_DSI1_I2C0_SDA 0xc6000020 + IMX8QM_MIPI_DSI1_GPIO0_01_LSIO_GPIO1_IO23 0x00000020 + >; + }; + pinctrl_flexspi0: flexspi0grp { fsl,pins = < IMX8QM_QSPI0A_DATA0_LSIO_QSPI0A_DATA0 0x06000021 @@ -582,6 +815,32 @@ >; }; + pinctrl_lvds0_lpi2c1: lvds0lpi2c1grp { + fsl,pins = < + IMX8QM_LVDS0_I2C1_SCL_LVDS0_I2C1_SCL 0xc600004c + IMX8QM_LVDS0_I2C1_SDA_LVDS0_I2C1_SDA 0xc600004c + >; + }; + + pinctrl_lvds1_lpi2c1: lvds1lpi2c1grp { + fsl,pins = < + IMX8QM_LVDS1_I2C1_SCL_LVDS1_I2C1_SCL 0xc600004c + IMX8QM_LVDS1_I2C1_SDA_LVDS1_I2C1_SDA 0xc600004c + >; + }; + + pinctrl_pwm_lvds0: pwmlvds0grp { + fsl,pins = < + IMX8QM_LVDS0_GPIO00_LVDS0_PWM0_OUT 0x00000020 + >; + }; + + pinctrl_pwm_lvds1: pwmlvds1grp { + fsl,pins = < + IMX8QM_LVDS1_GPIO00_LVDS1_PWM0_OUT 0x00000020 + >; + }; + pinctrl_sai0: sai0grp { fsl,pins = < IMX8QM_SPI0_CS1_AUD_SAI0_TXC 0x0600004c @@ -600,6 +859,19 @@ >; }; + pinctrl_typec: typecgrp { + fsl,pins = < + IMX8QM_QSPI1A_DATA0_LSIO_GPIO4_IO26 0x00000021 + >; + }; + + pinctrl_typec_mux: typecmuxgrp { + fsl,pins = < + IMX8QM_QSPI1A_SS0_B_LSIO_GPIO4_IO19 0x60 + IMX8QM_USB_SS3_TC3_LSIO_GPIO4_IO06 0x60 + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-lvds.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-lvds.dtsi new file mode 100644 index 000000000000..0514d8b2af75 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-lvds.dtsi @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/* + * Copyright 2024 NXP + */ + +&qm_lvds0_lis_lpcg { + clocks = <&lvds_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_4>; +}; + +&qm_lvds0_pwm_lpcg { + clocks = <&clk IMX_SC_R_LVDS_0_PWM_0 IMX_SC_PM_CLK_PER>, + <&lvds_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; +}; + +&qm_lvds0_i2c0_lpcg { + clocks = <&clk IMX_SC_R_LVDS_0_I2C_0 IMX_SC_PM_CLK_PER>, + <&lvds_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; +}; + +&qm_pwm_lvds0 { + clocks = <&qm_lvds0_pwm_lpcg IMX_LPCG_CLK_4>, + <&qm_lvds0_pwm_lpcg IMX_LPCG_CLK_0>; +}; + +&qm_i2c0_lvds0 { + clocks = <&qm_lvds0_i2c0_lpcg IMX_LPCG_CLK_0>, + <&qm_lvds0_i2c0_lpcg IMX_LPCG_CLK_4>; +}; + +&lvds0_subsys { + interrupt-parent = <&irqsteer_lvds0>; + + irqsteer_lvds0: interrupt-controller@56240000 { + compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer"; + reg = <0x56240000 0x1000>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + interrupt-parent = <&gic>; + #interrupt-cells = <1>; + clocks = <&qm_lvds0_lis_lpcg IMX_LPCG_CLK_4>; + clock-names = "ipg"; + power-domains = <&pd IMX_SC_R_LVDS_0>; + + fsl,channel = <0>; + fsl,num-irqs = <32>; + }; + + lvds0_i2c1_lpcg: clock-controller@56243014 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x56243014 0x4>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_LVDS_0_I2C_0 IMX_SC_PM_CLK_PER>, + <&lvds_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "lvds0_i2c1_lpcg_clk", + "lvds0_i2c1_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_LVDS_0_I2C_0>; + }; + + i2c1_lvds0: i2c@56247000 { + compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x56247000 0x1000>; + interrupts = <9>; + clocks = <&lvds0_i2c1_lpcg IMX_LPCG_CLK_0>, + <&lvds0_i2c1_lpcg IMX_LPCG_CLK_4>; + clock-names = "per", "ipg"; + assigned-clocks = <&clk IMX_SC_R_LVDS_0_I2C_0 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <24000000>; + power-domains = <&pd IMX_SC_R_LVDS_0_I2C_0>; + status = "disabled"; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-mipi.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-mipi.dtsi new file mode 100644 index 000000000000..f4c393fe7204 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-mipi.dtsi @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/* + * Copyright 2024 NXP + */ + +&mipi0_lis_lpcg { + clocks = <&dsi_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>; + clock-output-names = "mipi0_lis_lpcg_ipg_clk"; +}; + +&mipi0_pwm_lpcg { + clocks = <&clk IMX_SC_R_MIPI_0_PWM_0 IMX_SC_PM_CLK_PER>, + <&dsi_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; + clock-output-names = "mipi0_pwm_lpcg_clk", + "mipi0_pwm_lpcg_ipg_clk"; +};
\ No newline at end of file diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi index 61986e0639e5..3ee6e2869e3c 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi @@ -560,11 +560,36 @@ clock-output-names = "spdif1_rx"; }; + lvds_ipg_clk: clock-controller-lvds-ipg { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "lvds0_ipg_clk"; + }; + + dsi_ipg_clk: clock-controller-dsi-ipg { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <120000000>; + clock-output-names = "dsi_ipg_clk"; + }; + + mipi_pll_div2_clk: clock-controller-mipi-div2-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <432000000>; + clock-output-names = "mipi_pll_div2_clk"; + }; + /* sorted in register address */ #include "imx8-ss-cm41.dtsi" #include "imx8-ss-audio.dtsi" #include "imx8-ss-vpu.dtsi" #include "imx8-ss-gpu0.dtsi" + #include "imx8-ss-mipi0.dtsi" + #include "imx8-ss-lvds0.dtsi" + #include "imx8-ss-mipi1.dtsi" + #include "imx8-ss-lvds1.dtsi" #include "imx8-ss-img.dtsi" #include "imx8-ss-dma.dtsi" #include "imx8-ss-conn.dtsi" @@ -576,3 +601,5 @@ #include "imx8qm-ss-conn.dtsi" #include "imx8qm-ss-lsio.dtsi" #include "imx8qm-ss-audio.dtsi" +#include "imx8qm-ss-lvds.dtsi" +#include "imx8qm-ss-mipi.dtsi" diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-aster.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-aster.dtsi index bc659066e19a..f7bbb2153ae0 100644 --- a/arch/arm64/boot/dts/freescale/imx8x-colibri-aster.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-aster.dtsi @@ -3,10 +3,24 @@ * Copyright 2018-2021 Toradex */ +/* Colibri Analogue Inputs */ +&adc0 { + status = "okay"; +}; + +/* Colibri PWM_A */ +&adma_pwm { + status = "okay"; +}; + &colibri_gpio_keys { status = "okay"; }; +&extcon_usbc_det { + status = "okay"; +}; + /* Colibri Ethernet */ &fec1 { status = "okay"; @@ -38,6 +52,28 @@ status = "okay"; }; +/* USB PHY for usbotg3 */ +&usb3_phy { + status = "okay"; +}; + +&usbotg1 { + status = "okay"; +}; + +&usbotg3 { + status = "okay"; +}; + +&usbotg3_cdns3 { + status = "okay"; +}; + +/* USB PHY for usbotg1 */ +&usbphy1 { + status = "okay"; +}; + /* Colibri SDCard */ &usdhc2 { status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi index 9af769ab8ceb..f75499765d85 100644 --- a/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi @@ -19,10 +19,24 @@ }; }; +/* Colibri Analogue Inputs */ +&adc0 { + status = "okay"; +}; + +/* Colibri PWM_A */ +&adma_pwm { + status = "okay"; +}; + &colibri_gpio_keys { status = "okay"; }; +&extcon_usbc_det { + status = "okay"; +}; + &i2c1 { status = "okay"; @@ -90,6 +104,28 @@ status = "okay"; }; +/* USB PHY for usbotg3 */ +&usb3_phy { + status = "okay"; +}; + +&usbotg1 { + status = "okay"; +}; + +&usbotg3 { + status = "okay"; +}; + +&usbotg3_cdns3 { + status = "okay"; +}; + +/* USB PHY for usbotg1 */ +&usbphy1 { + status = "okay"; +}; + /* Colibri SD/MMC Card */ &usdhc2 { status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-iris.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-iris.dtsi index 8d06925a8ebd..54393a0c5cbf 100644 --- a/arch/arm64/boot/dts/freescale/imx8x-colibri-iris.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-iris.dtsi @@ -17,10 +17,24 @@ }; }; +/* Colibri Analogue Inputs */ +&adc0 { + status = "okay"; +}; + +/* Colibri PWM_A */ +&adma_pwm { + status = "okay"; +}; + &colibri_gpio_keys { status = "okay"; }; +&extcon_usbc_det { + status = "okay"; +}; + /* Colibri FastEthernet */ &fec1 { status = "okay"; @@ -108,6 +122,28 @@ status = "okay"; }; +/* USB PHY for usbotg3 */ +&usb3_phy { + status = "okay"; +}; + +&usbotg1 { + status = "okay"; +}; + +&usbotg3 { + status = "okay"; +}; + +&usbotg3_cdns3 { + status = "okay"; +}; + +/* USB PHY for usbotg1 */ +&usbphy1 { + status = "okay"; +}; + /* Colibri SD/MMC Card */ &usdhc2 { status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi index 49d105eb4769..edba5b582414 100644 --- a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi @@ -23,17 +23,76 @@ }; }; + extcon_usbc_det: usbc-det { + compatible = "linux,extcon-usb-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbc_det>; + id-gpios = <&lsio_gpio5 9 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + reg_module_3v3: regulator-module-3v3 { compatible = "regulator-fixed"; regulator-name = "+V3.3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + reg_module_3v3_avdd: regulator-module-3v3-avdd { + compatible = "regulator-fixed"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+V3.3_AVDD_AUDIO"; + }; + + reg_module_vref_1v8: regulator-module-vref-1v8 { + compatible = "regulator-fixed"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "vref-1v8"; + }; + + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1_reg>; + gpio = <&lsio_gpio4 3 GPIO_ACTIVE_LOW>; + regulator-always-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "usbh_vbus"; + }; + + sound-card { + compatible = "simple-audio-card"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,name = "colibri-imx8x"; + + dailink_master: simple-audio-card,codec { + clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>; + sound-dai = <&sgtl5000_a>; + }; + + simple-audio-card,cpu { + sound-dai = <&sai0>; + }; + }; }; -/* TODO Analogue Inputs */ +/* Colibri Analogue Inputs */ +&adc0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0>; + vref-supply = <®_module_vref_1v8>; +}; -/* TODO Cooling maps for DX */ +/* Colibri PWM_A */ +&adma_pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_a>; +}; &cpu_alert0 { hysteresis = <2000>; @@ -47,9 +106,20 @@ type = "critical"; }; -/* TODO flexcan1 - 3 */ - -/* TODO GPU */ +&enet0_lpcg { + clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>, + <&conn_axi_clk>, + <&clk IMX_SC_R_ENET_0 IMX_SC_C_DISABLE_50>, + <&conn_ipg_clk>, + <&conn_ipg_clk>; + clock-output-names = "enet0_lpcg_timer_clk", + "enet0_lpcg_txc_sampling_clk", + "enet0_lpcg_ahb_clk", + "enet0_lpcg_ref_50mhz_clk", + "enet0_lpcg_ipg_clk", + "enet0_lpcg_ipg_s_clk"; +}; /* On-module I2C */ &i2c0 { @@ -60,6 +130,41 @@ pinctrl-0 = <&pinctrl_i2c0>, <&pinctrl_sgtl5000_usb_clk>; status = "okay"; + /* USB HUB USB3803 */ + usb-hub@8 { + compatible = "smsc,usb3803"; + reg = <0x8>; + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, + <&mclkout0_lpcg IMX_LPCG_CLK_0>; + assigned-clock-rates = <786432000>, <49152000>, <12000000>, <12000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb3503a>; + bypass-gpios = <&gpio_expander_43 5 GPIO_ACTIVE_LOW>; + clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>; + clock-names = "refclk"; + disabled-ports = <2>; + initial-mode = <1>; + intn-gpios = <&lsio_gpio3 4 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio_expander_43 4 GPIO_ACTIVE_LOW>; + }; + + sgtl5000_a: audio-codec@a { + compatible = "fsl,sgtl5000"; + reg = <0xa>; + #sound-dai-cells = <0>; + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, + <&mclkout0_lpcg IMX_LPCG_CLK_0>; + assigned-clock-rates = <786432000>, <49152000>, <12000000>, <12000000>; + clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>; + VDDA-supply = <®_module_3v3_avdd>; + VDDD-supply = <®_module_vref_1v8>; + VDDIO-supply = <®_module_3v3>; + }; + /* Touch controller */ touchscreen@2c { compatible = "adi,ad7879-1"; @@ -77,6 +182,21 @@ adi,conversion-interval = /bits/ 8 <255>; status = "disabled"; }; + + gpio_expander_43: gpio@43 { + compatible = "fcs,fxl6408"; + reg = <0x43>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "Wi-Fi_W_DISABLE", + "Wi-Fi_WKUP_WLAN", + "PWR_EN_+V3.3_WiFi_N", + "PCIe_REF_CLK_EN", + "USB_RESET_N", + "USB_BYPASS_N", + "Wi-Fi_PDn", + "Wi-Fi_WKUP_BT"; + }; }; /* TODO i2c lvds0 accessible on FFC (X2) */ @@ -321,13 +441,74 @@ pinctrl-names = "default"; }; +/* VPU Mailboxes */ +&mu_m0 { + status="okay"; +}; + +&mu1_m0 { + status="okay"; +}; + /* TODO MIPI CSI */ /* TODO MIPI DSI with DSI-to-HDMI bridge lt8912 */ /* TODO on-module PCIe for Wi-Fi */ -/* TODO On-module i2s / Audio */ +/* On-module I2S */ +&sai0 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai0>; + status = "okay"; +}; + +&thermal_zones { + pmic-thermal { + polling-delay-passive = <250>; + polling-delay = <2000>; + thermal-sensors = <&tsens IMX_SC_R_PMIC_0>; + + trips { + pmic_alert0: trip0 { + temperature = <110000>; + hysteresis = <2000>; + type = "passive"; + }; + + pmic_crit0: trip1 { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + pmic_cooling_map0: map0 { + trip = <&pmic_alert0>; + cooling-device = <&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A35_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A35_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; +}; + +&usbotg1 { + adp-disable; + disable-over-current; + extcon = <&extcon_usbc_det &extcon_usbc_det>; + hnp-disable; + power-active-high; + srp-disable; + vbus-supply = <®_usbh_vbus>; +}; + +&usbotg3_cdns3 { + dr_mode = "host"; +}; /* On-module eMMC */ &usdhc1 { @@ -356,11 +537,24 @@ no-1-8-v; }; -/* TODO USB Client/Host */ +&vpu { + compatible = "nxp,imx8qxp-vpu"; + status = "okay"; +}; -/* TODO USB Host */ +/* VPU Decoder */ +&vpu_core0 { + reg = <0x2d040000 0x10000>; + memory-region = <&decoder_boot>, <&decoder_rpc>; + status = "okay"; +}; -/* TODO VPU Encoder/Decoder */ +/* VPU Encoder */ +&vpu_core1 { + reg = <0x2d050000 0x10000>; + memory-region = <&encoder_boot>, <&encoder_rpc>; + status = "okay"; +}; &iomuxc { /* On-module touch pen-down interrupt */ diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts index a15987f49e8d..8d036b3962e9 100644 --- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts @@ -62,6 +62,15 @@ }; + reg_vdd_12v: regulator-vdd-12v { + compatible = "regulator-fixed"; + regulator-name = "VDD_12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&pcal6524 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_vref_1v8: regulator-adc-vref { compatible = "regulator-fixed"; regulator-name = "vref_1v8"; @@ -80,6 +89,68 @@ off-on-delay-us = <12000>; enable-active-high; }; + + backlight_lvds: backlight-lvds { + compatible = "pwm-backlight"; + pwms = <&adp5585 0 100000 0>; + brightness-levels = <0 100>; + num-interpolated-steps = <100>; + default-brightness-level = <100>; + power-supply = <®_vdd_12v>; + enable-gpios = <&adp5585 9 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + bt_sco_codec: bt-sco-codec { + compatible = "linux,bt-sco"; + #sound-dai-cells = <1>; + }; + + sound-bt-sco { + compatible = "simple-audio-card"; + simple-audio-card,name = "bt-sco-audio"; + simple-audio-card,format = "dsp_a"; + simple-audio-card,bitclock-inversion; + simple-audio-card,frame-master = <&btcpu>; + simple-audio-card,bitclock-master = <&btcpu>; + + btcpu: simple-audio-card,cpu { + sound-dai = <&sai1>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <16>; + }; + + simple-audio-card,codec { + sound-dai = <&bt_sco_codec 1>; + }; + }; + + sound-micfil { + compatible = "fsl,imx-audio-card"; + model = "micfil-audio"; + + pri-dai-link { + link-name = "micfil hifi"; + format = "i2s"; + + cpu { + sound-dai = <&micfil>; + }; + }; + }; + + sound-xcvr { + compatible = "fsl,imx-audio-card"; + model = "imx-audio-xcvr"; + + pri-dai-link { + link-name = "XCVR PCM"; + + cpu { + sound-dai = <&xcvr>; + }; + }; + }; }; &adc1 { @@ -145,9 +216,19 @@ }; }; +&lpi2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c1>; + status = "okay"; + + inertial-meter@6a { + compatible = "st,lsm6dso"; + reg = <0x6a>; + }; +}; + &lpi2c2 { - #address-cells = <1>; - #size-cells = <0>; clock-frequency = <400000>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&pinctrl_lpi2c2>; @@ -241,11 +322,19 @@ }; }; }; + + adp5585: io-expander@34 { + compatible = "adi,adp5585-00", "adi,adp5585"; + reg = <0x34>; + vdd-supply = <&buck4>; + gpio-controller; + #gpio-cells = <2>; + gpio-reserved-ranges = <5 1>; + #pwm-cells = <3>; + }; }; &lpi2c3 { - #address-cells = <1>; - #size-cells = <0>; clock-frequency = <400000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpi2c3>; @@ -337,6 +426,16 @@ status = "okay"; }; +&micfil { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_pdm>; + pinctrl-1 = <&pinctrl_pdm_sleep>; + assigned-clocks = <&clk IMX93_CLK_PDM>; + assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>; + assigned-clock-rates = <49152000>; + status = "okay"; +}; + &mu1 { status = "okay"; }; @@ -345,6 +444,17 @@ status = "okay"; }; +&sai1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_sai1>; + pinctrl-1 = <&pinctrl_sai1_sleep>; + assigned-clocks = <&clk IMX93_CLK_SAI1>; + assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>; + assigned-clock-rates = <12288000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + &usbotg1 { dr_mode = "otg"; hnp-disable; @@ -408,6 +518,18 @@ status = "okay"; }; +&xcvr { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_spdif>; + pinctrl-1 = <&pinctrl_spdif_sleep>; + assigned-clocks = <&clk IMX93_CLK_SPDIF>, + <&clk IMX93_CLK_AUDIO_XCVR>; + assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>, + <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>; + assigned-clock-rates = <12288000>, <200000000>; + status = "okay"; +}; + &iomuxc { pinctrl_eqos: eqosgrp { fsl,pins = < @@ -508,6 +630,13 @@ >; }; + pinctrl_lpi2c1: lpi2c1grp { + fsl,pins = < + MX93_PAD_I2C1_SCL__LPI2C1_SCL 0x40000b9e + MX93_PAD_I2C1_SDA__LPI2C1_SDA 0x40000b9e + >; + }; + pinctrl_lpi2c2: lpi2c2grp { fsl,pins = < MX93_PAD_I2C2_SCL__LPI2C2_SCL 0x40000b9e @@ -528,6 +657,40 @@ >; }; + pinctrl_pdm: pdmgrp { + fsl,pins = < + MX93_PAD_PDM_CLK__PDM_CLK 0x31e + MX93_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM00 0x31e + MX93_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM01 0x31e + >; + }; + + pinctrl_pdm_sleep: pdmsleepgrp { + fsl,pins = < + MX93_PAD_PDM_CLK__GPIO1_IO08 0x31e + MX93_PAD_PDM_BIT_STREAM0__GPIO1_IO09 0x31e + MX93_PAD_PDM_BIT_STREAM1__GPIO1_IO10 0x31e + >; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = < + MX93_PAD_SAI1_TXC__SAI1_TX_BCLK 0x31e + MX93_PAD_SAI1_TXFS__SAI1_TX_SYNC 0x31e + MX93_PAD_SAI1_TXD0__SAI1_TX_DATA00 0x31e + MX93_PAD_SAI1_RXD0__SAI1_RX_DATA00 0x31e + >; + }; + + pinctrl_sai1_sleep: sai1sleepgrp { + fsl,pins = < + MX93_PAD_SAI1_TXC__GPIO1_IO12 0x51e + MX93_PAD_SAI1_TXFS__GPIO1_IO11 0x51e + MX93_PAD_SAI1_TXD0__GPIO1_IO13 0x51e + MX93_PAD_SAI1_RXD0__GPIO1_IO14 0x51e + >; + }; + /* need to config the SION for data and cmd pad, refer to ERR052021 */ pinctrl_usdhc1: usdhc1grp { fsl,pins = < @@ -585,6 +748,20 @@ >; }; + pinctrl_spdif: spdifgrp { + fsl,pins = < + MX93_PAD_GPIO_IO22__SPDIF_IN 0x31e + MX93_PAD_GPIO_IO23__SPDIF_OUT 0x31e + >; + }; + + pinctrl_spdif_sleep: spdifsleepgrp { + fsl,pins = < + MX93_PAD_GPIO_IO22__GPIO2_IO22 0x31e + MX93_PAD_GPIO_IO23__GPIO2_IO23 0x31e + >; + }; + pinctrl_usdhc2_gpio: usdhc2gpiogrp { fsl,pins = < MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e diff --git a/arch/arm64/boot/dts/freescale/imx93-14x14-evk.dts b/arch/arm64/boot/dts/freescale/imx93-14x14-evk.dts new file mode 100644 index 000000000000..236a44c1782a --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx93-14x14-evk.dts @@ -0,0 +1,468 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2024 NXP + */ + +/dts-v1/; + +#include <dt-bindings/usb/pd.h> +#include "imx93.dtsi" + +/ { + model = "NXP i.MX93 14X14 EVK board"; + compatible = "fsl,imx93-14x14-evk", "fsl,imx93"; + + chosen { + stdout-path = &lpuart1; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + alloc-ranges = <0 0x80000000 0 0x40000000>; + size = <0 0x10000000>; + linux,cma-default; + }; + + vdev0vring0: vdev0vring0@a4000000 { + reg = <0 0xa4000000 0 0x8000>; + no-map; + }; + + vdev0vring1: vdev0vring1@a4008000 { + reg = <0 0xa4008000 0 0x8000>; + no-map; + }; + + vdev1vring0: vdev1vring0@a4010000 { + reg = <0 0xa4010000 0 0x8000>; + no-map; + }; + + vdev1vring1: vdev1vring1@a4018000 { + reg = <0 0xa4018000 0 0x8000>; + no-map; + }; + + rsc_table: rsc-table@2021e000 { + reg = <0 0x2021e000 0 0x1000>; + no-map; + }; + + vdevbuffer: vdevbuffer@a4020000 { + compatible = "shared-dma-pool"; + reg = <0 0xa4020000 0 0x100000>; + no-map; + }; + }; + + reg_can1_stby: regulator-can1-stby { + compatible = "regulator-fixed"; + regulator-name = "can1-stby"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pcal6524_2 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_can1_en>; + }; + + reg_can1_en: regulator-can1-en { + compatible = "regulator-fixed"; + regulator-name = "can1-en"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pcal6524_2 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_can2_stby: regulator-can2-stby { + compatible = "regulator-fixed"; + regulator-name = "can2-stby"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pcal6524_2 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_can2_en>; + }; + + reg_can2_en: regulator-can2-en { + compatible = "regulator-fixed"; + regulator-name = "can2-en"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pcal6524_2 13 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + off-on-delay-us = <12000>; + }; + + reg_vdd_12v: regulator-vdd-12v { + compatible = "regulator-fixed"; + regulator-name = "reg_vdd_12v"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&pcal6524 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_vref_1v8: regulator-adc-vref { + compatible = "regulator-fixed"; + regulator-name = "vref_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; +}; + +&adc1 { + vref-supply = <®_vref_1v8>; + status = "okay"; +}; + +&cm33 { + mbox-names = "tx", "rx", "rxdb"; + mboxes = <&mu1 0 1>, + <&mu1 1 1>, + <&mu1 3 1>; + memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>, + <&vdev1vring0>, <&vdev1vring1>, <&rsc_table>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy2>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <5000000>; + + ethphy2: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <2>; + eee-broken-1000t; + reset-gpios = <&pcal6524 16 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <80000>; + realtek,clkout-disable; + }; + }; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can1_stby>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_can2_stby>; + status = "okay"; +}; + +&lpi2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c1>; + status = "okay"; + + lsm6dsm@6a { + compatible = "st,lsm6dso"; + reg = <0x6a>; + }; +}; + +&lpi2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c2>; + status = "okay"; + + pcal6524_2: gpio@20 { + compatible = "nxp,pcal6524"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + pcal6524: gpio@22 { + compatible = "nxp,pcal6524"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcal6524>; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpio3>; + interrupts = <27 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&lpi2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c3>; + status = "okay"; +}; + +&lpuart1 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&mu1 { + status = "okay"; +}; + +&mu2 { + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + hnp-disable; + srp-disable; + adp-disable; + disable-over-current; + samsung,picophy-pre-emp-curr-control = <3>; + samsung,picophy-dc-vol-level-adjust = <7>; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + samsung,picophy-pre-emp-curr-control = <3>; + samsung,picophy-dc-vol-level-adjust = <7>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + bus-width = <4>; + no-mmc; + status = "okay"; +}; + +&wdog3 { + status = "okay"; +}; + +&iomuxc { + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX93_PAD_PDM_CLK__CAN1_TX 0x139e + MX93_PAD_PDM_BIT_STREAM0__CAN1_RX 0x139e + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX93_PAD_GPIO_IO25__CAN2_TX 0x139e + MX93_PAD_GPIO_IO27__CAN2_RX 0x139e + >; + }; + + pinctrl_lpi2c1: lpi2c1grp { + fsl,pins = < + MX93_PAD_I2C1_SCL__LPI2C1_SCL 0x40000b9e + MX93_PAD_I2C1_SDA__LPI2C1_SDA 0x40000b9e + >; + }; + + pinctrl_lpi2c2: lpi2c2grp { + fsl,pins = < + MX93_PAD_I2C2_SCL__LPI2C2_SCL 0x40000b9e + MX93_PAD_I2C2_SDA__LPI2C2_SDA 0x40000b9e + >; + }; + + pinctrl_lpi2c3: lpi2c3grp { + fsl,pins = < + MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e + MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e + >; + }; + + pinctrl_pcal6524: pcal6524grp { + fsl,pins = < + MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x31e + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX93_PAD_ENET2_MDC__ENET1_MDC 0x57e + MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x57e + MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x57e + MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x57e + MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x57e + MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x57e + MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x58e + MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x57e + MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x57e + MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x57e + MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2 0x57e + MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3 0x57e + MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC 0x58e + MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL 0x57e + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX93_PAD_UART1_RXD__LPUART1_RX 0x31e + MX93_PAD_UART1_TXD__LPUART1_TX 0x31e + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x31e + MX93_PAD_DAP_TDI__LPUART5_RX 0x31e + MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x31e + MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x31e + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX93_PAD_SD1_CLK__USDHC1_CLK 0x1582 + MX93_PAD_SD1_CMD__USDHC1_CMD 0x40001382 + MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x40001382 + MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x40001382 + MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x40001382 + MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x40001382 + MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x40001382 + MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x40001382 + MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x40001382 + MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x40001382 + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x1582 + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX93_PAD_SD1_CLK__USDHC1_CLK 0x158e + MX93_PAD_SD1_CMD__USDHC1_CMD 0x4000138e + MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x4000138e + MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x4000138e + MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x4000138e + MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x4000138e + MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x4000138e + MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x4000138e + MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x4000138e + MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x4000138e + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x158e + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX93_PAD_SD1_CLK__USDHC1_CLK 0x15fe + MX93_PAD_SD1_CMD__USDHC1_CMD 0x400013fe + MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x400013fe + MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x400013fe + MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x400013fe + MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x400013fe + MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x400013fe + MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x400013fe + MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x400013fe + MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x400013fe + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x31e + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX93_PAD_SD2_CLK__USDHC2_CLK 0x1582 + MX93_PAD_SD2_CMD__USDHC2_CMD 0x40001382 + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x40001382 + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x40001382 + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x40001382 + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x40001382 + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX93_PAD_SD2_CLK__USDHC2_CLK 0x158e + MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000138e + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000138e + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000138e + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x4000138e + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x4000138e + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX93_PAD_SD2_CLK__USDHC2_CLK 0x15fe + MX93_PAD_SD2_CMD__USDHC2_CMD 0x400013fe + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x400013fe + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x400013fe + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x400013fe + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x400013fe + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts index 950dece83c24..f8a73612fa05 100644 --- a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts +++ b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts @@ -178,8 +178,6 @@ }; &lpi2c2 { - #address-cells = <1>; - #size-cells = <0>; clock-frequency = <400000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpi2c2>; diff --git a/arch/arm64/boot/dts/freescale/imx93-kontron-bl-osm-s.dts b/arch/arm64/boot/dts/freescale/imx93-kontron-bl-osm-s.dts new file mode 100644 index 000000000000..89e97c604bd3 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx93-kontron-bl-osm-s.dts @@ -0,0 +1,163 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2024 Kontron Electronics GmbH + */ + +/dts-v1/; + +#include "imx93-kontron-osm-s.dtsi" + +/ { + model = "Kontron BL i.MX93 OSM-S"; + compatible = "kontron,imx93-bl-osm-s", "kontron,imx93-osm-s", "fsl,imx93"; + + aliases { + ethernet0 = &fec; + ethernet1 = &eqos; + }; + + leds { + compatible = "gpio-leds"; + + led1 { + label = "led1"; + gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + pwm-beeper { + compatible = "pwm-beeper"; + pwms = <&tpm6 1 5000 0>; + }; + + reg_vcc_panel: regulator-vcc-panel { + compatible = "regulator-fixed"; + gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "VCC_PANEL"; + }; +}; + +&eqos { /* Second ethernet (OSM-S ETH_B) */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos_rgmii>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy1>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-id4f51.e91b"; + reg = <1>; + reset-assert-us = <10000>; + reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&fec { /* First ethernet (OSM-S ETH_A) */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_rgmii>; + phy-connection-type = "rgmii-id"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@1 { + compatible = "ethernet-phy-id4f51.e91b"; + reg = <1>; + reset-assert-us = <10000>; + reset-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&flexcan1 { + status = "okay"; +}; + +&lpi2c2 { + status = "okay"; + + gpio_expander_dio: gpio@20 { + compatible = "ti,tca6408"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "DIO1_OUT","DIO1_IN", "DIO2_OUT","DIO2_IN", + "DIO3_OUT","DIO3_IN", "DIO4_OUT","DIO4_IN"; + interrupt-parent = <&gpio4>; + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + }; +}; + +&lpspi8 { + assigned-clocks = <&clk IMX93_CLK_LPSPI8>; + assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>; + assigned-clock-rates = <100000000>; + status = "okay"; + + eeram@0 { + compatible = "microchip,48l640"; + reg = <0>; + spi-max-frequency = <20000000>; + }; +}; + +&lpuart1 { + status = "okay"; +}; + +&lpuart7 { + uart-has-rtscts; + status = "okay"; +}; + +&lpuart6 { + linux,rs485-enabled-at-boot-time; + uart-has-rtscts; + status = "okay"; +}; + +&tpm6 { + status = "okay"; +}; + +&usbotg1 { + #address-cells = <1>; + #size-cells = <0>; + disable-over-current; + dr_mode = "host"; + status = "okay"; + + usb1@1 { + compatible = "usb424,2514"; + reg = <1>; + }; +}; + +&usbotg2 { + adp-disable; + hnp-disable; + srp-disable; + disable-over-current; + dr_mode = "otg"; + usb-role-switch; + status = "okay"; +}; + +&usdhc2 { + vmmc-supply = <®_vdd_3v3>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx93-kontron-osm-s.dtsi b/arch/arm64/boot/dts/freescale/imx93-kontron-osm-s.dtsi new file mode 100644 index 000000000000..47c1363a2f99 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx93-kontron-osm-s.dtsi @@ -0,0 +1,628 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2024 Kontron Electronics GmbH + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include "imx93.dtsi" + +/ { + model = "Kontron OSM-S i.MX93"; + compatible = "kontron,imx93-osm-s", "fsl,imx93"; + + aliases { + rtc0 = &rv3028; + rtc1 = &bbnsm_rtc; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; + + chosen { + stdout-path = &lpuart1; + }; + + reg_usdhc2_vcc: regulator-usdhc2-vcc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vcc>; + gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "VCC_SDIO_A"; + }; + + reg_vdd_carrier: regulator-vdd-carrier { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_vdd_carrier>; + gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + regulator-name = "VDD_CARRIER"; + + regulator-state-standby { + regulator-on-in-suspend; + }; + + regulator-state-mem { + regulator-off-in-suspend; + }; + + regulator-state-disk { + regulator-off-in-suspend; + }; + }; +}; + +&flexcan1 { /* OSM-S CAN_A */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; +}; + +&flexcan2 { /* OSM-S CAN_B */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; +}; + +&gpio1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio1>; + gpio-line-names = "", "", "I2C_A_SCL", "I2C_A_SDA", + "UART_CON_RX", "UART_CON_TX", "UART_C_RX", "UART_C_TX", + "CAN_A_TX", "CAN_A_RX", "GPIO_A_0", "SPI_A_CS0", + "SPI_A_SDI", "SPI_A_SCK","SPI_A_SDO"; +}; + +&gpio2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio2>; + gpio-line-names = "I2C_B_SDA", "I2C_B_SCL", "GPIO_B_1", "GPIO_A_2", + "UART_B_TX", "UART_B_RX", "UART_B_RTS", "UART_B_CTS", + "UART_A_TX", "UART_A_RX", "UART_A_RTS", "UART_A_CTS", + "SPI_B_CS0", "SPI_B_SDI", "SPI_B_SDO", "SPI_B_SCK", + "I2S_BITCLK", "I2S_MCLK", "GPIO_A_1", "I2S_A_DATA_OUT", + "I2S_A_DATA_IN", "PWM_2", "GPIO_A_3", "PWM_1", + "PWM_0", "CAN_B_TX", "I2S_LRCLK", "CAN_B_RX", "GPIO_A_4", + "GPIO_A_5"; +}; + +&gpio3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio3>; + gpio-line-names = "SDIO_A_CD", "SDIO_A_CLK", "SDIO_A_CMD", "SDIO_A_D0", + "SDIO_A_D1", "SDIO_A_D2", "SDIO_A_D3", "SDIO_A_PWR_EN", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "SDIO_B_CLK", "SDIO_B_CMD", "SDIO_B_D0", "SDIO_B_D1", + "SDIO_B_D2", "SDIO_B_D3", "GPIO_A_6", "GPIO_A_7"; +}; + +&gpio4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio4>; + gpio-line-names = "ETH_B_MDC", "ETH_B_MDIO", "ETH_B_TXD4", "ETH_B_TXD3", + "ETH_B_TXD2", "ETH_B_TXD1", "ETH_B_TX_EN", "ETH_B_TX_CLK", + "ETH_B_RX_CTL", "ETH_B_RX_CLK", "ETH_B_RXD0", "ETH_B_RXD1", + "ETH_B_RXD2", "ETH_B_RXD3", "ETH_MDC", "ETH_MDIO", + "ETH_A_TXD3", "ETH_A_TXD2", "ETH_A_TXD1", "ETH_A_TXD0", + "ETH_A_TX_EN", "ETH_A_TX_CLK", "ETH_A_RX_CTL", "ETH_A_RX_CLK", + "ETH_A_RXD0", "ETH_A_RXD1", "ETH_A_RXD2", "ETH_A_RXD3", + "GPIO_B_0", "CARRIER_PWR_EN"; +}; + +&lpi2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c1>; + status = "okay"; + + pca9451: pmic@25 { + compatible = "nxp,pca9451a"; + reg = <0x25>; + nxp,i2c-lt-enable; + + regulators { + reg_vdd_soc: BUCK1 { /* dual phase with BUCK3 */ + regulator-name = "+0V8_VDD_SOC (BUCK1)"; + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <950000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + reg_vddq_ddr: BUCK2 { + regulator-name = "+0V6_VDDQ_DDR (BUCK2)"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + reg_vdd_3v3: BUCK4 { + regulator-name = "+3V3 (BUCK4)"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdd_1v8: BUCK5 { + regulator-name = "+1V8 (BUCK5)"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_nvcc_dram: BUCK6 { + regulator-name = "+1V1_NVCC_DRAM (BUCK6)"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_nvcc_snvs: LDO1 { + regulator-name = "+1V8_NVCC_SNVS (LDO1)"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdd_ana: LDO4 { + regulator-name = "+0V8_VDD_ANA (LDO4)"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_nvcc_sd: LDO5 { + regulator-name = "NVCC_SD (LDO5)"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + + eeprom@50 { + compatible = "onnn,n24s64b", "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + size = <8192>; + num-addresses = <1>; + }; + + rv3028: rtc@52 { + compatible = "microcrystal,rv3028"; + reg = <0x52>; + }; +}; + +&lpi2c2 { /* OSM-S I2C_A */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c2>; +}; + +&lpi2c3 { /* OSM-S I2C_B */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c3>; +}; + +&lpspi1 { /* OSM-S SPI_A */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpspi1>; + cs-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; +}; + +&lpspi8 { /* OSM-S SPI_B */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpspi8>; + cs-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; +}; + +&lpuart1 { /* OSM-S UART_CON */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart1>; +}; + +&lpuart2 { /* OSM-S UART_C */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart2>; +}; + +&lpuart6 { /* OSM-S UART_B */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart6>; +}; + +&lpuart7 { /* OSM-S UART_A */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart7>; +}; + +&tpm3 { /* OSM-S PWM_0 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tpm3>; +}; + +&tpm4 { /* OSM-S PWM_2 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tpm4>; +}; + +&tpm6 { /* OSM-S PWM_1 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tpm6>; +}; + +&usdhc1 { /* eMMC */ + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + vmmc-supply = <®_vdd_3v3>; + vqmmc-supply = <®_vdd_1v8>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&usdhc2 { /* OSM-S SDIO_A */ + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + vmmc-supply = <®_usdhc2_vcc>; + cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; +}; + +&usdhc3 { /* OSM-S SDIO_B */ + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + vqmmc-supply = <®_vdd_1v8>; +}; + +&wdog3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_enet_rgmii: enetrgmiigrp { + fsl,pins = < + MX93_PAD_ENET2_MDC__ENET1_MDC 0x57e /* ETH_MDC */ + MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x57e /* ETH_MDIO */ + MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x57e /* ETH_A_(S)(R)(G)MII_RXD0 */ + MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x57e /* ETH_A_(S)(R)(G)MII_RXD1 */ + MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x57e /* ETH_A_(R)(G)MII_RXD2 */ + MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x57e /* ETH_A_(R)(G)MII_RXD3 */ + MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x5fe /* ETH_A_(R)(G)MII_RX_CLK */ + MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x57e /* ETH_A_(R)(G)MII_RX_DV(_ER) */ + MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x57e /* ETH_A_(S)(R)(G)MII_TXD0 */ + MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x57e /* ETH_A_(S)(R)(G)MII_TXD1 */ + MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2 0x57e /* ETH_A_(S)(R)(G)MII_TXD2 */ + MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3 0x57e /* ETH_A_(S)(R)(G)MII_TXD3 */ + MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC 0x5fe /* ETH_A_(R)(G)MII_TX_CLK */ + MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL 0x57e /* ETH_A_(R)(G)MII_TX_EN(_ER) */ + >; + }; + + pinctrl_eqos_rgmii: eqosrgmiigrp { + fsl,pins = < + MX93_PAD_ENET1_MDC__ENET_QOS_MDC 0x57e /* ETH_B_MDC */ + MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x57e /* ETH_B_MDIO */ + MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x57e /* ETH_B_(S)(R)(G)MII_RXD0 */ + MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e /* ETH_B_(S)(R)(G)MII_RXD1 */ + MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x57e /* ETH_B_(R)(G)MII_RXD2 */ + MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x57e /* ETH_B_(R)(G)MII_RXD3 */ + MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x57e /* ETH_B_(R)(G)MII_RX_CLK */ + MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e /* ETH_B_(R)(G)MII_RX_DV(_ER) */ + MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x57e /* ETH_B_(S)(R)(G)MII_TXD0 */ + MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x57e /* ETH_B_(S)(R)(G)MII_TXD1 */ + MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x57e /* ETH_B_(S)(R)(G)MII_TXD2 */ + MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x57e /* ETH_B_(S)(R)(G)MII_TXD3 */ + MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x57e /* ETH_B_(R)(G)MII_TX_CLK */ + MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x57e /* ETH_B_(R)(G)MII_TX_EN(_ER) */ + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX93_PAD_PDM_CLK__CAN1_TX 0x139e /* CAN_A_TX */ + MX93_PAD_PDM_BIT_STREAM0__CAN1_RX 0x139e /* CAN_A_RX */ + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX93_PAD_GPIO_IO25__CAN2_TX 0x139e /* CAN_B_TX */ + MX93_PAD_GPIO_IO27__CAN2_RX 0x139e /* CAN_B_RX */ + >; + }; + + pinctrl_gpio1: gpio1grp { + fsl,pins = < + MX93_PAD_PDM_BIT_STREAM1__GPIO1_IO10 0x31e /* GPIO_A_0 */ + >; + }; + + pinctrl_gpio2: gpio2grp { + fsl,pins = < + MX93_PAD_GPIO_IO18__GPIO2_IO18 0x31e /* GPIO_A_1 */ + MX93_PAD_GPIO_IO03__GPIO2_IO03 0x31e /* GPIO_A_2 */ + MX93_PAD_GPIO_IO22__GPIO2_IO22 0x31e /* GPIO_A_3 */ + MX93_PAD_GPIO_IO28__GPIO2_IO28 0x31e /* GPIO_A_4 */ + MX93_PAD_GPIO_IO29__GPIO2_IO29 0x31e /* GPIO_A_5 */ + MX93_PAD_GPIO_IO02__GPIO2_IO02 0x31e /* GPIO_B_1 */ + >; + }; + + pinctrl_gpio3: gpio3grp { + fsl,pins = < + MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x31e /* GPIO_A_6 */ + MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x31e /* GPIO_A_7 */ + >; + }; + + pinctrl_gpio4: gpio4grp { + fsl,pins = < + MX93_PAD_CCM_CLKO3__GPIO4_IO28 0x31e /* GPIO_B_0 */ + >; + }; + + pinctrl_lpi2c1: lpi2c1grp { + fsl,pins = < + MX93_PAD_I2C1_SCL__LPI2C1_SCL 0x40000b9e + MX93_PAD_I2C1_SDA__LPI2C1_SDA 0x40000b9e + >; + }; + + pinctrl_lpi2c2: lpi2c2grp { + fsl,pins = < + MX93_PAD_I2C2_SCL__LPI2C2_SCL 0x40000b9e /* I2C_A_SCL */ + MX93_PAD_I2C2_SDA__LPI2C2_SDA 0x40000b9e /* I2C_A_SDA */ + >; + }; + + pinctrl_lpi2c3: lpi2c3grp { + fsl,pins = < + MX93_PAD_GPIO_IO01__LPI2C3_SCL 0x40000b9e /* I2C_B_SCL */ + MX93_PAD_GPIO_IO00__LPI2C3_SDA 0x40000b9e /* I2C_B_SDA */ + >; + }; + + pinctrl_lpspi1: lpspi1grp { + fsl,pins = < + MX93_PAD_SAI1_TXC__LPSPI1_SIN 0x3fe /* SPI_A_SDI_(IO0) */ + MX93_PAD_SAI1_RXD0__LPSPI1_SOUT 0x3fe /* SPI_A_SDO_(IO1) */ + MX93_PAD_SAI1_TXD0__LPSPI1_SCK 0x3fe /* SPI_A_SCK */ + MX93_PAD_SAI1_TXFS__GPIO1_IO11 0x3fe /* SPI_A_CS0# */ + >; + }; + + pinctrl_lpspi8: lpspi8grp { + fsl,pins = < + MX93_PAD_GPIO_IO13__LPSPI8_SIN 0x3fe /* SPI_B_SDI */ + MX93_PAD_GPIO_IO14__LPSPI8_SOUT 0x3fe /* SPI_B_SDO */ + MX93_PAD_GPIO_IO15__LPSPI8_SCK 0x3fe /* SPI_B_SCK */ + MX93_PAD_GPIO_IO12__GPIO2_IO12 0x3fe /* SPI_B_CS0# */ + >; + }; + + pinctrl_lpuart1: lpuart1grp { + fsl,pins = < + MX93_PAD_UART1_RXD__LPUART1_RX 0x31e /* UART_CON_RX */ + MX93_PAD_UART1_TXD__LPUART1_TX 0x31e /* UART_CON_TX */ + >; + }; + + pinctrl_lpuart2: lpuart2grp { + fsl,pins = < + MX93_PAD_UART2_RXD__LPUART2_RX 0x31e /* UART_C_RX */ + MX93_PAD_UART2_TXD__LPUART2_TX 0x31e /* UART_C_TX */ + >; + }; + + pinctrl_lpuart6: lpuart6grp { + fsl,pins = < + MX93_PAD_GPIO_IO05__LPUART6_RX 0x31e /* UART_B_RX */ + MX93_PAD_GPIO_IO04__LPUART6_TX 0x31e /* UART_B_TX */ + MX93_PAD_GPIO_IO07__LPUART6_RTS_B 0x31e /* UART_B_CTS */ + MX93_PAD_GPIO_IO06__LPUART6_CTS_B 0x31e /* UART_B_RTS */ + >; + }; + + pinctrl_lpuart7: lpuart7grp { + fsl,pins = < + MX93_PAD_GPIO_IO09__LPUART7_RX 0x31e /* UART_A_RX */ + MX93_PAD_GPIO_IO08__LPUART7_TX 0x31e /* UART_A_TX */ + MX93_PAD_GPIO_IO11__LPUART7_RTS_B 0x31e /* UART_A_CTS */ + MX93_PAD_GPIO_IO10__LPUART7_CTS_B 0x31e /* UART_A_RTS */ + >; + }; + + pinctrl_reg_usdhc2_vcc: regusdhc2vccgrp { + fsl,pins = < + MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x31e /* SDIO_A_PWR_EN */ + >; + }; + + pinctrl_reg_vdd_carrier: regvddcarriergrp { + fsl,pins = < + MX93_PAD_CCM_CLKO4__GPIO4_IO29 0x31e /* CARRIER_PWR_EN */ + >; + }; + + pinctrl_sai3: sai3grp { + fsl,pins = < + MX93_PAD_GPIO_IO20__SAI3_RX_DATA00 0x31e /* I2S_A_DATA_IN */ + MX93_PAD_GPIO_IO19__SAI3_TX_DATA00 0x31e /* I2S_A_DATA_OUT */ + MX93_PAD_GPIO_IO17__SAI3_MCLK 0x31e /* I2S_MCLK */ + MX93_PAD_GPIO_IO26__SAI3_TX_SYNC 0x31e /* I2S_LRCLK */ + MX93_PAD_GPIO_IO16__SAI3_TX_BCLK 0x31e /* I2S_BITCLK */ + >; + }; + + pinctrl_tpm3: tpm3grp { + fsl,pins = < + MX93_PAD_GPIO_IO24__TPM3_CH3 0x57e /* PWM_0 */ + >; + }; + + pinctrl_tpm4: tpm4grp { + fsl,pins = < + MX93_PAD_GPIO_IO21__TPM4_CH1 0x57e /* PWM_2 */ + >; + }; + + pinctrl_tpm6: tpm6grp { + fsl,pins = < + MX93_PAD_GPIO_IO23__TPM6_CH1 0x57e /* PWM_1 */ + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX93_PAD_SD1_CLK__USDHC1_CLK 0x1582 + MX93_PAD_SD1_CMD__USDHC1_CMD 0x40001382 + MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x40001382 + MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x40001382 + MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x40001382 + MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x40001382 + MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x40001382 + MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x40001382 + MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x40001382 + MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x40001382 + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x1582 + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX93_PAD_SD1_CLK__USDHC1_CLK 0x158e + MX93_PAD_SD1_CMD__USDHC1_CMD 0x4000138e + MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x4000138e + MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x4000138e + MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x4000138e + MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x4000138e + MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x4000138e + MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x4000138e + MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x4000138e + MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x4000138e + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x158e + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX93_PAD_SD1_CLK__USDHC1_CLK 0x15fe + MX93_PAD_SD1_CMD__USDHC1_CMD 0x400013fe + MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x400013fe + MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x400013fe + MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x400013fe + MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x400013fe + MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x400013fe + MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x400013fe + MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x400013fe + MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x400013fe + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX93_PAD_SD2_CLK__USDHC2_CLK 0x1582 /* SDIO_A_CLK */ + MX93_PAD_SD2_CMD__USDHC2_CMD 0x40001382 /* SDIO_A_CMD */ + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x40001382 /* SDIO_A_D0 */ + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x40001382 /* SDIO_A_D1 */ + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x40001382 /* SDIO_A_D2 */ + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x40001382 /* SDIO_A_D3 */ + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX93_PAD_SD2_CLK__USDHC2_CLK 0x158e /* SDIO_A_CLK */ + MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000138e /* SDIO_A_CMD */ + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000138e /* SDIO_A_D0 */ + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000138e /* SDIO_A_D1 */ + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x4000138e /* SDIO_A_D2 */ + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x4000138e /* SDIO_A_D3 */ + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX93_PAD_SD2_CLK__USDHC2_CLK 0x15fe /* SDIO_A_CLK */ + MX93_PAD_SD2_CMD__USDHC2_CMD 0x400013fe /* SDIO_A_CMD */ + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x400013fe /* SDIO_A_D0 */ + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x400013fe /* SDIO_A_D1 */ + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x400013fe /* SDIO_A_D2 */ + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x400013fe /* SDIO_A_D3 */ + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e /* SDIO_A_CD# */ + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX93_PAD_SD3_CLK__USDHC3_CLK 0x1582 /* SDIO_B_CLK */ + MX93_PAD_SD3_CMD__USDHC3_CMD 0x40001382 /* SDIO_B_CMD */ + MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x40001382 /* SDIO_B_D0 */ + MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x40001382 /* SDIO_B_D1 */ + MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x40001382 /* SDIO_B_D2 */ + MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x40001382 /* SDIO_B_D3 */ + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX93_PAD_SD3_CLK__USDHC3_CLK 0x158e /* SDIO_B_CLK */ + MX93_PAD_SD3_CMD__USDHC3_CMD 0x4000138e /* SDIO_B_CMD */ + MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x4000138e /* SDIO_B_D0 */ + MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x4000138e /* SDIO_B_D1 */ + MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x4000138e /* SDIO_B_D2 */ + MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x4000138e /* SDIO_B_D3 */ + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX93_PAD_SD3_CLK__USDHC3_CLK 0x15fe /* SDIO_B_CLK */ + MX93_PAD_SD3_CMD__USDHC3_CMD 0x400013fe /* SDIO_B_CMD */ + MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x400013fe /* SDIO_B_D0 */ + MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x400013fe /* SDIO_B_D1 */ + MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x400013fe /* SDIO_B_D2 */ + MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x400013fe /* SDIO_B_D3 */ + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts index 852dd3d2eac7..599df32976e2 100644 --- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts +++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts @@ -26,6 +26,8 @@ aliases { eeprom0 = &eeprom0; + ethernet0 = &fec; + ethernet1 = &eqos; rtc0 = &pcf85063; rtc1 = &bbnsm_rtc; }; @@ -274,6 +276,16 @@ }; &gpio1 { + gpio-line-names = + /* 00 */ "", "", "USB_C_ALERT#", "PMIC_IRQ#", + /* 04 */ "", "", "", "", + /* 08 */ "", "", "", "BM2_TEMP_EVENT_MOD#", + /* 12 */ "PEX_INT#", "", "RTC_EVENT#", "", + /* 16 */ "", "", "", "", + /* 20 */ "", "", "", "", + /* 24 */ "", "", "", "", + /* 28 */ "", "", "", ""; + expander-irq-hog { gpio-hog; gpios = <12 GPIO_ACTIVE_LOW>; @@ -289,6 +301,45 @@ }; }; +&gpio2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio2>; + + gpio-line-names = + /* 00 */ "SPI6_PCS0#", "", "", "", + /* 04 */ "", "", "", "", + /* 08 */ "", "FAN_RPM", "MIPI_CSI_TRIGGER", "MIPI_CSI_SYNC", + /* 12 */ "", "", "", "", + /* 16 */ "X1_11", "X1_21", "X1_17", "X1_13", + /* 20 */ "X1_15", "X1_9", "", "", + /* 24 */ "", "", "X1_7", "", + /* 28 */ "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + /* 00 */ "SD2_CD#", "", "", "", + /* 04 */ "", "", "", "SD2_RST#", + /* 08 */ "", "", "", "", + /* 12 */ "", "", "", "", + /* 16 */ "", "", "", "", + /* 20 */ "", "", "", "", + /* 24 */ "", "", "ENET1_INT#", "ENET2_INT#", + /* 28 */ "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = + /* 00 */ "", "", "", "", + /* 04 */ "", "", "", "", + /* 08 */ "", "", "", "", + /* 12 */ "", "", "", "", + /* 16 */ "", "", "", "", + /* 20 */ "", "", "", "", + /* 24 */ "", "", "", "", + /* 28 */ "", "DP_INT", "", ""; +}; + &lpi2c3 { #address-cells = <1>; #size-cells = <0>; @@ -495,6 +546,22 @@ status = "okay"; }; +&pcf85063 { + /* RTC_EVENT# from SoM is connected on mainboard */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcf85063>; + interrupt-parent = <&gpio1>; + interrupts = <14 IRQ_TYPE_EDGE_FALLING>; +}; + +&se97_som { + /* TEMP_EVENT# from SoM is connected on mainboard */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_temp_sensor_som>; + interrupt-parent = <&gpio1>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; +}; + &tpm5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_tpm5>; @@ -533,7 +600,7 @@ samsung,picophy-dc-vol-level-adjust = <7>; status = "okay"; - hub_2_0: hub@1 { + hub_2_0: usb-hub@1 { compatible = "usb424,2517"; reg = <1>; reset-gpios = <&expander1 2 GPIO_ACTIVE_LOW>; @@ -559,22 +626,23 @@ pinctrl_eqos: eqosgrp { fsl,pins = < /* PD | FSEL_2 | DSE X4 */ - MX93_PAD_ENET1_MDC__ENET_QOS_MDC 0x51e - MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x4000051e - /* PD | FSEL_2 | DSE X6 */ - MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x57e - MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e - MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x57e - MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x57e - /* PD | FSEL_3 | DSE X6 */ - MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x5fe - MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e + MX93_PAD_ENET1_MDC__ENET_QOS_MDC 0x51e + /* SION | HYS | FSEL_2 | DSE X4 */ + MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x4000111e + /* HYS | FSEL_0 | DSE no drive */ + MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x1000 + MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x1000 + MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x1000 + MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x1000 + MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x1000 + /* HYS | PD | FSEL_0 | DSE no drive */ + MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x1400 /* PD | FSEL_2 | DSE X4 */ - MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x51e - MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x51e - MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x51e - MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x51e - MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x51e + MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x51e + MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x51e + MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x51e + MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x51e + MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x51e /* PD | FSEL_3 | DSE X3 */ MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x58e >; @@ -582,7 +650,8 @@ pinctrl_eqos_phy: eqosphygrp { fsl,pins = < - MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x1306 + /* HYS | FSEL_0 | DSE no drive */ + MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x1000 >; }; @@ -590,15 +659,16 @@ fsl,pins = < /* PD | FSEL_2 | DSE X4 */ MX93_PAD_ENET2_MDC__ENET1_MDC 0x51e - MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x4000051e - /* PD | FSEL_2 | DSE X6 */ - MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x57e - MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x57e - MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x57e - MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x57e - /* PD | FSEL_3 | DSE X6 */ - MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x5fe - MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x57e + /* SION | HYS | FSEL_2 | DSE X4 */ + MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x4000111e + /* HYS | FSEL_0 | DSE no drive */ + MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x1000 + MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x1000 + MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x1000 + MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x1000 + MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x1000 + /* HYS | PD | FSEL_0 | DSE no drive */ + MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x1400 /* PD | FSEL_2 | DSE X4 */ MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x51e MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x51e @@ -612,147 +682,224 @@ pinctrl_fec_phy: fecphygrp { fsl,pins = < - MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x1306 + /* HYS | FSEL_0 | DSE no drive */ + MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x1000 >; }; pinctrl_flexcan1: flexcan1grp { fsl,pins = < - MX93_PAD_PDM_BIT_STREAM0__CAN1_RX 0x139e - MX93_PAD_PDM_CLK__CAN1_TX 0x139e + /* HYS | PU | FSEL_0 | DSE no drive */ + MX93_PAD_PDM_BIT_STREAM0__CAN1_RX 0x1200 + /* PU | FSEL_3 | DSE X4 */ + MX93_PAD_PDM_CLK__CAN1_TX 0x039e >; }; pinctrl_flexcan2: flexcan2grp { fsl,pins = < - MX93_PAD_GPIO_IO25__CAN2_TX 0x139e - MX93_PAD_GPIO_IO27__CAN2_RX 0x139e + /* HYS | PU | FSEL_0 | DSE no drive */ + MX93_PAD_GPIO_IO27__CAN2_RX 0x1200 + /* PU | FSEL_3 | DSE X4 */ + MX93_PAD_GPIO_IO25__CAN2_TX 0x039e + >; + }; + + pinctrl_gpio2: gpio2grp { + fsl,pins = < + /* HYS | PD | FSEL_2 | DSE X4 */ + MX93_PAD_GPIO_IO16__GPIO2_IO16 0x151e + MX93_PAD_GPIO_IO17__GPIO2_IO17 0x151e + MX93_PAD_GPIO_IO18__GPIO2_IO18 0x151e + MX93_PAD_GPIO_IO19__GPIO2_IO19 0x151e + MX93_PAD_GPIO_IO20__GPIO2_IO20 0x151e + MX93_PAD_GPIO_IO21__GPIO2_IO21 0x151e + MX93_PAD_GPIO_IO26__GPIO2_IO26 0x151e + >; + }; + + pinctrl_jtag: jtaggrp { + fsl,pins = < + MX93_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK 0x051e + MX93_PAD_DAP_TDI__JTAG_MUX_TDI 0x1200 + MX93_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO 0x031e + MX93_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS 0x1200 >; }; pinctrl_lpi2c3: lpi2c3grp { fsl,pins = < - MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e - MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e + /* SION | HYS | OD | FSEL_3 | DSE X4 */ + MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x4000199e + MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x4000199e >; }; pinctrl_lpi2c5: lpi2c5grp { fsl,pins = < - MX93_PAD_GPIO_IO22__LPI2C5_SDA 0x40000b9e - MX93_PAD_GPIO_IO23__LPI2C5_SCL 0x40000b9e + /* SION | HYS | OD | FSEL_3 | DSE X4 */ + MX93_PAD_GPIO_IO22__LPI2C5_SDA 0x4000199e + MX93_PAD_GPIO_IO23__LPI2C5_SCL 0x4000199e >; }; pinctrl_lpspi6: lpspi6grp { fsl,pins = < - MX93_PAD_GPIO_IO00__LPSPI6_PCS0 0x3fe - MX93_PAD_GPIO_IO01__LPSPI6_SIN 0x3fe - MX93_PAD_GPIO_IO02__LPSPI6_SOUT 0x3fe - MX93_PAD_GPIO_IO03__LPSPI6_SCK 0x3fe + /* FSEL_2 | DSE X4 */ + MX93_PAD_GPIO_IO00__LPSPI6_PCS0 0x011e + /* HYS | PD | FSEL_0 | DSE no drive */ + MX93_PAD_GPIO_IO01__LPSPI6_SIN 0x1400 + /* PD | FSEL_2 | DSE X4 */ + MX93_PAD_GPIO_IO02__LPSPI6_SOUT 0x051e + MX93_PAD_GPIO_IO03__LPSPI6_SCK 0x051e + >; + }; + + pinctrl_pcf85063: pcf85063grp { + fsl,pins = < + MX93_PAD_SAI1_RXD0__GPIO1_IO14 0x1000 + >; + }; + + pinctrl_mipi_csi: mipicsigrp { + fsl,pins = < + MX93_PAD_CCM_CLKO3__CCMSRCGPCMIX_CLKO3 0x051e /* MCLK */ + MX93_PAD_GPIO_IO10__GPIO2_IO10 0x051e /* TRIGGER */ + MX93_PAD_GPIO_IO11__GPIO2_IO11 0x1400 /* SYNC */ >; }; pinctrl_pexp_irq: pexpirqgrp { fsl,pins = < - MX93_PAD_SAI1_TXC__GPIO1_IO12 0x1306 + /* HYS | FSEL_0 | No DSE */ + MX93_PAD_SAI1_TXC__GPIO1_IO12 0x1000 >; }; pinctrl_pwmfan: pwmfangrp { fsl,pins = < - MX93_PAD_GPIO_IO09__GPIO2_IO09 0x1306 + /* HYS | PU | FSEL_0 | no DSE */ + MX93_PAD_GPIO_IO09__GPIO2_IO09 0x1200 + >; + }; + + pinctrl_temp_sensor_som: tempsensorsomgrp { + fsl,pins = < + /* HYS | FSEL_0 | no DSE */ + MX93_PAD_SAI1_TXFS__GPIO1_IO11 0x1000 + >; + }; + + pinctrl_tc9595: tc9595-grp { + fsl,pins = < + /* HYS | PD | FSEL_0 | no DSE */ + MX93_PAD_CCM_CLKO4__GPIO4_IO29 0x1400 >; }; pinctrl_tpm5: tpm5grp { fsl,pins = < - MX93_PAD_GPIO_IO06__TPM5_CH0 0x57e + MX93_PAD_GPIO_IO06__TPM5_CH0 0x57e >; }; pinctrl_tpm6: tpm6grp { fsl,pins = < - MX93_PAD_GPIO_IO08__TPM6_CH0 0x57e + MX93_PAD_GPIO_IO08__TPM6_CH0 0x57e >; }; pinctrl_typec: typecgrp { fsl,pins = < - MX93_PAD_I2C2_SCL__GPIO1_IO02 0x1306 + /* HYS | FSEL_0 | No DSE */ + MX93_PAD_I2C2_SCL__GPIO1_IO02 0x1000 >; }; pinctrl_uart1: uart1grp { fsl,pins = < - MX93_PAD_UART1_RXD__LPUART1_RX 0x31e - MX93_PAD_UART1_TXD__LPUART1_TX 0x31e + /* HYS | FSEL_0 | No DSE */ + MX93_PAD_UART1_RXD__LPUART1_RX 0x1000 + /* FSEL_2 | DSE X4 */ + MX93_PAD_UART1_TXD__LPUART1_TX 0x011e >; }; pinctrl_uart2: uart2grp { fsl,pins = < - MX93_PAD_UART2_TXD__LPUART2_TX 0x31e - MX93_PAD_UART2_RXD__LPUART2_RX 0x31e - MX93_PAD_SAI1_TXD0__LPUART2_RTS_B 0x51e + /* HYS | FSEL_0 | No DSE */ + MX93_PAD_UART2_RXD__LPUART2_RX 0x1000 + /* FSEL_2 | DSE X4 */ + MX93_PAD_UART2_TXD__LPUART2_TX 0x011e + /* FSEL_2 | DSE X4 */ + MX93_PAD_SAI1_TXD0__LPUART2_RTS_B 0x011e >; }; pinctrl_uart3: uart3grp { fsl,pins = < - MX93_PAD_GPIO_IO14__LPUART3_TX 0x31e - MX93_PAD_GPIO_IO15__LPUART3_RX 0x31e + /* HYS | FSEL_0 | No DSE */ + MX93_PAD_GPIO_IO15__LPUART3_RX 0x1000 + /* FSEL_2 | DSE X4 */ + MX93_PAD_GPIO_IO14__LPUART3_TX 0x011e >; }; pinctrl_uart6: uart6grp { fsl,pins = < - MX93_PAD_GPIO_IO04__LPUART6_TX 0x31e - MX93_PAD_GPIO_IO05__LPUART6_RX 0x31e + /* HYS | FSEL_0 | No DSE */ + MX93_PAD_GPIO_IO05__LPUART6_RX 0x1000 + /* FSEL_2 | DSE X4 */ + MX93_PAD_GPIO_IO04__LPUART6_TX 0x011e >; }; pinctrl_uart8: uart8grp { fsl,pins = < - MX93_PAD_GPIO_IO12__LPUART8_TX 0x31e - MX93_PAD_GPIO_IO13__LPUART8_RX 0x31e + /* HYS | FSEL_0 | No DSE */ + MX93_PAD_GPIO_IO13__LPUART8_RX 0x1000 + /* FSEL_2 | DSE X4 */ + MX93_PAD_GPIO_IO12__LPUART8_TX 0x011e >; }; pinctrl_usdhc2_gpio: usdhc2gpiogrp { fsl,pins = < - MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e + /* HYS | FSEL_0 | No DSE */ + MX93_PAD_SD2_CD_B__GPIO3_IO00 0x1000 >; }; + /* enable SION for data and cmd pad due to ERR052021 */ pinctrl_usdhc2_hs: usdhc2hsgrp { fsl,pins = < - /* HYS | PD | PU | FSEL_3 | DSE X5 */ - MX93_PAD_SD2_CLK__USDHC2_CLK 0x17be - /* HYS | PD | PU | FSEL_3 | DSE X4 */ - MX93_PAD_SD2_CMD__USDHC2_CMD 0x139e - /* HYS | PD | PU | FSEL_3 | DSE X3 */ - MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x138e - MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x138e - MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x138e - MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x138e - /* PD | PU | FSEL_2 | DSE X3 */ - MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x50e + /* PD | FSEL_3 | DSE X5 */ + MX93_PAD_SD2_CLK__USDHC2_CLK 0x05be + /* HYS | PU | FSEL_3 | DSE X4 */ + MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000139e + /* HYS | PU | FSEL_3 | DSE X3 */ + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000138e + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000138e + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x4000138e + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x4000138e + /* FSEL_2 | DSE X3 */ + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x010e >; }; + /* enable SION for data and cmd pad due to ERR052021 */ pinctrl_usdhc2_uhs: usdhc2uhsgrp { fsl,pins = < - /* HYS | PD | PU | FSEL_3 | DSE X6 */ - MX93_PAD_SD2_CLK__USDHC2_CLK 0x17fe - /* HYS | PD | PU | FSEL_3 | DSE X4 */ - MX93_PAD_SD2_CMD__USDHC2_CMD 0x139e - MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x139e - MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x139e - MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x139e - MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x139e - /* PD | PU | FSEL_2 | DSE X3 */ - MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x50e + /* PD | FSEL_3 | DSE X6 */ + MX93_PAD_SD2_CLK__USDHC2_CLK 0x05fe + /* HYS | PU | FSEL_3 | DSE X4 */ + MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000139e + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000139e + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000139e + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x4000139e + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x4000139e + /* FSEL_2 | DSE X3 */ + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x010e >; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts index e2ee9f5a042c..0b4b3bb866d0 100644 --- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts +++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts @@ -26,6 +26,8 @@ aliases { eeprom0 = &eeprom0; + ethernet0 = &fec; + ethernet1 = &eqos; rtc0 = &pcf85063; rtc1 = &bbnsm_rtc; }; @@ -207,6 +209,16 @@ }; &gpio1 { + gpio-line-names = + /* 00 */ "", "", "USB_C_ALERT#", "PMIC_IRQ#", + /* 04 */ "", "", "", "", + /* 08 */ "", "", "", "BM2_TEMP_EVENT_MOD#", + /* 12 */ "PEX_INT#", "", "RTC_EVENT#", "", + /* 16 */ "", "", "", "", + /* 20 */ "", "", "", "", + /* 24 */ "", "", "", "", + /* 28 */ "", "", "", ""; + expander-irq-hog { gpio-hog; gpios = <12 GPIO_ACTIVE_LOW>; @@ -222,19 +234,63 @@ }; }; +&gpio2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio2>; + + gpio-line-names = + /* 00 */ "", "", "", "", + /* 04 */ "", "", "", "AFE_RESET#", + /* 08 */ "AFE_SYNC", "AFE_DRDY", "MIPI_CSI_TRIGGER", "MIPI_CSI_SYNC", + /* 12 */ "", "", "", "", + /* 16 */ "X1_19", "X1_29", "X1_25", "X1_21", + /* 20 */ "X1_23", "X1_17", "", "", + /* 24 */ "AFE_INT#", "", "X1_15", "", + /* 28 */ "", "", "", ""; +}; + &gpio3 { + gpio-line-names = + /* 00 */ "SD2_CD#", "", "", "", + /* 04 */ "", "", "", "SD2_RST#", + /* 08 */ "", "", "", "", + /* 12 */ "", "", "", "", + /* 16 */ "", "", "", "", + /* 20 */ "", "", "", "", + /* 24 */ "", "", "ENET1_INT#", "ENET2_INT#", + /* 28 */ "", "", "", ""; + ethphy-eqos-irq-hog { gpio-hog; gpios = <26 GPIO_ACTIVE_LOW>; input; - line-name = "ENET0_IRQ#"; + line-name = "ENET1_INT#"; }; ethphy-fec-irq-hog { gpio-hog; gpios = <27 GPIO_ACTIVE_LOW>; input; - line-name = "ENET1_IRQ#"; + line-name = "ENET2_INT#"; + }; +}; + +&gpio4 { + gpio-line-names = + /* 00 */ "", "", "", "", + /* 04 */ "", "", "", "", + /* 08 */ "", "", "", "", + /* 12 */ "", "", "", "", + /* 16 */ "", "", "", "", + /* 20 */ "", "", "", "", + /* 24 */ "", "", "", "", + /* 28 */ "", "DP_INT", "", ""; + + dp-int-hog { + gpio-hog; + gpios = <29 GPIO_ACTIVE_LOW>; + input; + line-name = "DP_INT"; }; }; @@ -371,7 +427,7 @@ #gpio-cells = <2>; vcc-supply = <®_3v3>; gpio-line-names = "LCD_RESET#", "LCD_PWR_EN", - "LCD_BL_EN", "DP_EN", + "LCD_BLT_EN", "DP_EN", "MIPI_CSI_EN", "MIPI_CSI_RST#", "USER_LED1", "USER_LED2"; }; @@ -414,6 +470,13 @@ }; }; +&lpspi6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpspi6>, <&pinctrl_lpspi6_cs>; + cs-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + &lpuart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; @@ -447,13 +510,21 @@ }; &pcf85063 { - /* RTC_EVENT# is connected on MBa93xxLA */ + /* RTC_EVENT# from SoM is connected on mainboard */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcf85063>; interrupt-parent = <&gpio1>; interrupts = <14 IRQ_TYPE_EDGE_FALLING>; }; +&se97_som { + /* TEMP_EVENT# from SoM is connected on mainboard */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_temp_sensor_som>; + interrupt-parent = <&gpio1>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; +}; + &tpm5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_tpm5>; @@ -486,7 +557,7 @@ samsung,picophy-dc-vol-level-adjust = <7>; status = "okay"; - hub_2_0: hub@1 { + hub_2_0: usb-hub@1 { compatible = "usb424,2517"; reg = <1>; reset-gpios = <&expander1 2 GPIO_ACTIVE_LOW>; @@ -509,25 +580,39 @@ }; &iomuxc { + pinctrl_afe: afegrp { + fsl,pins = < + /* FSEL_2 | DSE X4 */ + MX93_PAD_GPIO_IO07__GPIO2_IO07 0x011e + /* PD | FSEL_2 | DSE X4 */ + MX93_PAD_GPIO_IO08__GPIO2_IO08 0x051e + /* HYS | PD */ + MX93_PAD_GPIO_IO09__GPIO2_IO09 0x1400 + /* HYS */ + MX93_PAD_GPIO_IO24__GPIO2_IO24 0x1000 + >; + }; + pinctrl_eqos: eqosgrp { fsl,pins = < /* PD | FSEL_2 | DSE X4 */ - MX93_PAD_ENET1_MDC__ENET_QOS_MDC 0x51e - MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x4000051e - /* PD | FSEL_2 | DSE X6 */ - MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x57e - MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e - MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x57e - MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x57e - /* PD | FSEL_3 | DSE X6 */ - MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x5fe - MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e + MX93_PAD_ENET1_MDC__ENET_QOS_MDC 0x51e + /* SION | HYS | FSEL_2 | DSE X4 */ + MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x4000111e + /* HYS | FSEL_0 | DSE no drive */ + MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x1000 + MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x1000 + MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x1000 + MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x1000 + MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x1000 + /* HYS | PD | FSEL_0 | DSE no drive */ + MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x1400 /* PD | FSEL_2 | DSE X4 */ - MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x51e - MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x51e - MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x51e - MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x51e - MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x51e + MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x51e + MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x51e + MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x51e + MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x51e + MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x51e /* PD | FSEL_3 | DSE X3 */ MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x58e >; @@ -535,7 +620,8 @@ pinctrl_eqos_phy: eqosphygrp { fsl,pins = < - MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x1306 + /* HYS | FSEL_0 | DSE no drive */ + MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x1000 >; }; @@ -543,15 +629,16 @@ fsl,pins = < /* PD | FSEL_2 | DSE X4 */ MX93_PAD_ENET2_MDC__ENET1_MDC 0x51e - MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x4000051e - /* PD | FSEL_2 | DSE X6 */ - MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x57e - MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x57e - MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x57e - MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x57e - /* PD | FSEL_3 | DSE X6 */ - MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x5fe - MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x57e + /* SION | HYS | FSEL_2 | DSE X4 */ + MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x4000111e + /* HYS | FSEL_0 | DSE no drive */ + MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x1000 + MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x1000 + MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x1000 + MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x1000 + MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x1000 + /* HYS | PD | FSEL_0 | DSE no drive */ + MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x1400 /* PD | FSEL_2 | DSE X4 */ MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x51e MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x51e @@ -565,139 +652,216 @@ pinctrl_fec_phy: fecphygrp { fsl,pins = < - MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x1306 + /* HYS | FSEL_0 | DSE no drive */ + MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x1000 >; }; pinctrl_flexcan1: flexcan1grp { fsl,pins = < - MX93_PAD_PDM_BIT_STREAM0__CAN1_RX 0x139e - MX93_PAD_PDM_CLK__CAN1_TX 0x139e + /* HYS | PU | FSEL_0 | DSE no drive */ + MX93_PAD_PDM_BIT_STREAM0__CAN1_RX 0x1200 + /* PU | FSEL_3 | DSE X4 */ + MX93_PAD_PDM_CLK__CAN1_TX 0x039e >; }; pinctrl_flexcan2: flexcan2grp { fsl,pins = < - MX93_PAD_GPIO_IO25__CAN2_TX 0x139e - MX93_PAD_GPIO_IO27__CAN2_RX 0x139e + /* HYS | PU | FSEL_0 | DSE no drive */ + MX93_PAD_GPIO_IO27__CAN2_RX 0x1200 + /* PU | FSEL_3 | DSE X4 */ + MX93_PAD_GPIO_IO25__CAN2_TX 0x039e + >; + }; + + pinctrl_gpio2: gpio2grp { + fsl,pins = < + /* HYS | PD | FSEL_2 | DSE X4 */ + MX93_PAD_GPIO_IO16__GPIO2_IO16 0x151e + MX93_PAD_GPIO_IO17__GPIO2_IO17 0x151e + MX93_PAD_GPIO_IO18__GPIO2_IO18 0x151e + MX93_PAD_GPIO_IO19__GPIO2_IO19 0x151e + MX93_PAD_GPIO_IO20__GPIO2_IO20 0x151e + MX93_PAD_GPIO_IO21__GPIO2_IO21 0x151e + MX93_PAD_GPIO_IO26__GPIO2_IO26 0x151e + >; + }; + + pinctrl_jtag: jtaggrp { + fsl,pins = < + MX93_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK 0x051e + MX93_PAD_DAP_TDI__JTAG_MUX_TDI 0x1200 + MX93_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO 0x031e + MX93_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS 0x1200 >; }; pinctrl_lpi2c3: lpi2c3grp { fsl,pins = < - MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e - MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e + /* SION | HYS | OD | FSEL_3 | DSE X4 */ + MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x4000199e + MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x4000199e >; }; pinctrl_lpi2c5: lpi2c5grp { fsl,pins = < - MX93_PAD_GPIO_IO22__LPI2C5_SDA 0x40000b9e - MX93_PAD_GPIO_IO23__LPI2C5_SCL 0x40000b9e + /* SION | HYS | OD | FSEL_3 | DSE X4 */ + MX93_PAD_GPIO_IO22__LPI2C5_SDA 0x4000199e + MX93_PAD_GPIO_IO23__LPI2C5_SCL 0x4000199e + >; + }; + + pinctrl_lpspi6: lpspi6grp { + fsl,pins = < + /* HYS | PD | FSEL_0 | DSE no drive */ + MX93_PAD_GPIO_IO01__LPSPI6_SIN 0x1400 + /* PD | FSEL_2 | DSE X4 */ + MX93_PAD_GPIO_IO02__LPSPI6_SOUT 0x051e + MX93_PAD_GPIO_IO03__LPSPI6_SCK 0x051e + >; + }; + + pinctrl_lpspi6_cs: lpspi6csgrp { + fsl,pins = < + /* FSEL_2 | DSE X4 */ + MX93_PAD_GPIO_IO00__GPIO2_IO00 0x011e + >; + }; + + pinctrl_mipi_csi: mipicsigrp { + fsl,pins = < + MX93_PAD_CCM_CLKO3__CCMSRCGPCMIX_CLKO3 0x051e /* MCLK */ + MX93_PAD_GPIO_IO10__GPIO2_IO10 0x051e /* TRIGGER */ + MX93_PAD_GPIO_IO11__GPIO2_IO11 0x1400 /* SYNC */ >; }; pinctrl_pcf85063: pcf85063grp { fsl,pins = < - MX93_PAD_SAI1_RXD0__GPIO1_IO14 0x1306 + /* HYS | FSEL_0 | No DSE */ + MX93_PAD_SAI1_RXD0__GPIO1_IO14 0x1000 >; }; pinctrl_pexp_irq: pexpirqgrp { fsl,pins = < - MX93_PAD_SAI1_TXC__GPIO1_IO12 0x1306 + /* HYS | FSEL_0 | No DSE */ + MX93_PAD_SAI1_TXC__GPIO1_IO12 0x1000 >; }; pinctrl_tc9595: tc9595-grp { fsl,pins = < - /* DP_IRQ */ - MX93_PAD_CCM_CLKO4__GPIO4_IO29 0x1306 + /* HYS | PD | FSEL_0 | no DSE */ + MX93_PAD_CCM_CLKO4__GPIO4_IO29 0x1400 + >; + }; + + pinctrl_temp_sensor_som: tempsensorsomgrp { + fsl,pins = < + /* HYS | FSEL_0 | no DSE */ + MX93_PAD_SAI1_TXFS__GPIO1_IO11 0x1000 >; }; pinctrl_tpm5: tpm5grp { fsl,pins = < - MX93_PAD_GPIO_IO06__TPM5_CH0 0x57e + MX93_PAD_GPIO_IO06__TPM5_CH0 0x57e >; }; pinctrl_typec: typecgrp { fsl,pins = < - MX93_PAD_I2C2_SCL__GPIO1_IO02 0x1306 + /* HYS | FSEL_0 | No DSE */ + MX93_PAD_I2C2_SCL__GPIO1_IO02 0x1000 >; }; pinctrl_uart1: uart1grp { fsl,pins = < - MX93_PAD_UART1_RXD__LPUART1_RX 0x31e - MX93_PAD_UART1_TXD__LPUART1_TX 0x31e + /* HYS | FSEL_0 | No DSE */ + MX93_PAD_UART1_RXD__LPUART1_RX 0x1000 + /* FSEL_2 | DSE X4 */ + MX93_PAD_UART1_TXD__LPUART1_TX 0x011e >; }; pinctrl_uart2: uart2grp { fsl,pins = < - MX93_PAD_UART2_TXD__LPUART2_TX 0x31e - MX93_PAD_UART2_RXD__LPUART2_RX 0x31e - MX93_PAD_SAI1_TXD0__LPUART2_RTS_B 0x51e + /* HYS | FSEL_0 | No DSE */ + MX93_PAD_UART2_RXD__LPUART2_RX 0x1000 + /* FSEL_2 | DSE X4 */ + MX93_PAD_UART2_TXD__LPUART2_TX 0x011e + MX93_PAD_SAI1_TXD0__LPUART2_RTS_B 0x011e >; }; pinctrl_uart3: uart3grp { fsl,pins = < - MX93_PAD_GPIO_IO14__LPUART3_TX 0x31e - MX93_PAD_GPIO_IO15__LPUART3_RX 0x31e + /* HYS | FSEL_0 | No DSE */ + MX93_PAD_GPIO_IO15__LPUART3_RX 0x1000 + /* FSEL_2 | DSE X4 */ + MX93_PAD_GPIO_IO14__LPUART3_TX 0x011e >; }; pinctrl_uart6: uart6grp { fsl,pins = < - MX93_PAD_GPIO_IO04__LPUART6_TX 0x31e - MX93_PAD_GPIO_IO05__LPUART6_RX 0x31e + /* HYS | FSEL_0 | No DSE */ + MX93_PAD_GPIO_IO05__LPUART6_RX 0x1000 + /* FSEL_2 | DSE X4 */ + MX93_PAD_GPIO_IO04__LPUART6_TX 0x011e >; }; pinctrl_uart8: uart8grp { fsl,pins = < - MX93_PAD_GPIO_IO12__LPUART8_TX 0x31e - MX93_PAD_GPIO_IO13__LPUART8_RX 0x31e + /* HYS | FSEL_0 | No DSE */ + MX93_PAD_GPIO_IO13__LPUART8_RX 0x1000 + /* FSEL_2 | DSE X4 */ + MX93_PAD_GPIO_IO12__LPUART8_TX 0x011e >; }; pinctrl_usdhc2_gpio: usdhc2gpiogrp { fsl,pins = < - MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e + /* HYS | FSEL_0 | No DSE */ + MX93_PAD_SD2_CD_B__GPIO3_IO00 0x1000 >; }; + /* enable SION for data and cmd pad due to ERR052021 */ pinctrl_usdhc2_hs: usdhc2hsgrp { fsl,pins = < - /* HYS | PD | PU | FSEL_3 | DSE X5 */ - MX93_PAD_SD2_CLK__USDHC2_CLK 0x17be - /* HYS | PD | PU | FSEL_3 | DSE X4 */ - MX93_PAD_SD2_CMD__USDHC2_CMD 0x139e - /* HYS | PD | PU | FSEL_3 | DSE X3 */ - MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x138e - MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x138e - MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x138e - MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x138e - /* PD | PU | FSEL_2 | DSE X3 */ - MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x50e + /* PD | FSEL_3 | DSE X5 */ + MX93_PAD_SD2_CLK__USDHC2_CLK 0x05be + /* HYS | PU | FSEL_3 | DSE X4 */ + MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000139e + /* HYS | PU | FSEL_3 | DSE X3 */ + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000138e + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000138e + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x4000138e + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x4000138e + /* FSEL_2 | DSE X3 */ + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x010e >; }; + /* enable SION for data and cmd pad due to ERR052021 */ pinctrl_usdhc2_uhs: usdhc2uhsgrp { fsl,pins = < - /* HYS | PD | PU | FSEL_3 | DSE X6 */ - MX93_PAD_SD2_CLK__USDHC2_CLK 0x17fe - /* HYS | PD | PU | FSEL_3 | DSE X4 */ - MX93_PAD_SD2_CMD__USDHC2_CMD 0x139e - MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x139e - MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x139e - MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x139e - MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x139e - /* PD | PU | FSEL_2 | DSE X3 */ - MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x50e + /* PD | FSEL_3 | DSE X6 */ + MX93_PAD_SD2_CLK__USDHC2_CLK 0x05fe + /* HYS | PU | FSEL_3 | DSE X4 */ + MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000139e + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000139e + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000139e + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x4000139e + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x4000139e + /* FSEL_2 | DSE X3 */ + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x010e >; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi b/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi index 72a9a5d4e27a..2cabdae24227 100644 --- a/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi @@ -25,20 +25,6 @@ }; }; - reg_v1v8: regulator-v1v8 { - compatible = "regulator-fixed"; - regulator-name = "V_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - reg_v3v3: regulator-v3v3 { - compatible = "regulator-fixed"; - regulator-name = "V_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - /* SD2 RST# via PMIC SW_EN */ reg_usdhc2_vmmc: regulator-usdhc2 { compatible = "regulator-fixed"; @@ -47,14 +33,14 @@ regulator-name = "VSD_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - vin-supply = <®_v3v3>; + vin-supply = <&buck4>; gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; &adc1 { - vref-supply = <®_v1v8>; + vref-supply = <&buck5>; }; &flexspi1 { @@ -105,6 +91,91 @@ reg = <0x1b>; }; + pca9451a: pmic@25 { + compatible = "nxp,pca9451a"; + reg = <0x25>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pca9451>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + regulators { + /* V_0V8_SOC - hw developer guide: 0.75 .. 0.9 */ + buck1: BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + /* V_DDRQ - 1.1 LPDDR4 or 0.6 LPDDR4X */ + buck2: BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + /* V_3V3 - EEPROM, RTC, ... */ + buck4: BUCK4 { + regulator-name = "BUCK4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + /* V_1V8 - SPI NOR, eMMC, RAM VDD1... */ + buck5: BUCK5 { + regulator-name = "BUCK5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + /* V_1V1 - RAM VDD2*/ + buck6: BUCK6 { + regulator-name = "BUCK6"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + /* V_1V8_BBSM, fix 1.8 */ + ldo1: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + /* V_0V8_ANA */ + ldo4: LDO4 { + regulator-name = "LDO4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + /* V_SD2 - 3.3/1.8V USDHC2 io Voltage */ + ldo5: LDO5 { + regulator-name = "LDO5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + pcf85063: rtc@51 { compatible = "nxp,pcf85063a"; reg = <0x51>; @@ -116,28 +187,28 @@ reg = <0x53>; pagesize = <16>; read-only; - vcc-supply = <®_v3v3>; + vcc-supply = <&buck4>; }; eeprom1: eeprom@57 { compatible = "atmel,24c64"; reg = <0x57>; pagesize = <32>; - vcc-supply = <®_v3v3>; + vcc-supply = <&buck4>; }; /* protectable identification memory (part of M24C64-D @57) */ eeprom@5f { compatible = "atmel,24c64d-wl"; reg = <0x5f>; - vcc-supply = <®_v3v3>; + vcc-supply = <&buck4>; }; imu@6a { compatible = "st,ism330dhcx"; reg = <0x6a>; - vdd-supply = <®_v3v3>; - vddio-supply = <®_v3v3>; + vdd-supply = <&buck4>; + vddio-supply = <&buck4>; }; }; @@ -146,6 +217,8 @@ pinctrl-0 = <&pinctrl_usdhc1>; pinctrl-1 = <&pinctrl_usdhc1>; pinctrl-2 = <&pinctrl_usdhc1>; + vmmc-supply = <&buck4>; + vqmmc-supply = <&buck5>; bus-width = <8>; non-removable; no-sdio; @@ -163,55 +236,64 @@ &iomuxc { pinctrl_flexspi1: flexspi1grp { fsl,pins = < - MX93_PAD_SD3_CMD__FLEXSPI1_A_SS0_B 0x3fe - MX93_PAD_SD3_CLK__FLEXSPI1_A_SCLK 0x3fe - MX93_PAD_SD3_DATA0__FLEXSPI1_A_DATA00 0x3fe - MX93_PAD_SD3_DATA1__FLEXSPI1_A_DATA01 0x3fe - MX93_PAD_SD3_DATA2__FLEXSPI1_A_DATA02 0x3fe - MX93_PAD_SD3_DATA3__FLEXSPI1_A_DATA03 0x3fe + /* FSEL 3 | DSE X6 */ + MX93_PAD_SD3_CMD__FLEXSPI1_A_SS0_B 0x01fe + MX93_PAD_SD3_CLK__FLEXSPI1_A_SCLK 0x01fe + /* HYS | PU | FSEL 3 | DSE X6 */ + MX93_PAD_SD3_DATA0__FLEXSPI1_A_DATA00 0x13fe + MX93_PAD_SD3_DATA1__FLEXSPI1_A_DATA01 0x13fe + /* HYS | FSEL 3 | DSE X6 (external PU) */ + MX93_PAD_SD3_DATA2__FLEXSPI1_A_DATA02 0x11fe + MX93_PAD_SD3_DATA3__FLEXSPI1_A_DATA03 0x11fe >; }; pinctrl_lpi2c1: lpi2c1grp { fsl,pins = < - MX93_PAD_I2C1_SCL__LPI2C1_SCL 0x40000b9e - MX93_PAD_I2C1_SDA__LPI2C1_SDA 0x40000b9e + /* SION | OD | FSEL 3 | DSE X4 */ + MX93_PAD_I2C1_SCL__LPI2C1_SCL 0x4000199e + MX93_PAD_I2C1_SDA__LPI2C1_SDA 0x4000199e >; }; pinctrl_pca9451: pca9451grp { fsl,pins = < - MX93_PAD_I2C2_SDA__GPIO1_IO03 0x1306 + /* HYS | PU */ + MX93_PAD_I2C2_SDA__GPIO1_IO03 0x1200 >; }; pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { fsl,pins = < - MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x1306 + /* FSEL 2 | DSE X2 */ + MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x106 >; }; + /* enable SION for data and cmd pad due to ERR052021 */ pinctrl_usdhc1: usdhc1grp { fsl,pins = < - /* HYS | PU | PD | FSEL_3 | X5 */ - MX93_PAD_SD1_CLK__USDHC1_CLK 0x17be - MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x17be - /* HYS | PU | FSEL_3 | X5 */ - MX93_PAD_SD1_CMD__USDHC1_CMD 0x13be - /* HYS | PU | FSEL_3 | X4 */ - MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x139e - MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x139e - MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x139e - MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x139e - MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x139e - MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x139e - MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x139e - MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x139e + /* PD | FSEL 3 | DSE X5 */ + MX93_PAD_SD1_CLK__USDHC1_CLK 0x5be + /* HYS | FSEL 0 | no drive */ + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x1000 + /* HYS | FSEL 3 | X5 */ + MX93_PAD_SD1_CMD__USDHC1_CMD 0x400011be + /* HYS | FSEL 3 | X4 */ + MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x4000119e + MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x4000119e + MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x4000119e + MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x4000119e + MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x4000119e + MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x4000119e + MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x4000119e + MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x4000119e >; }; pinctrl_wdog: wdoggrp { fsl,pins = < + /* PU | FSEL 1 | DSE X4 */ MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY 0x31e >; }; diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi index a0993022c102..04b9b3d31f4f 100644 --- a/arch/arm64/boot/dts/freescale/imx93.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi @@ -69,6 +69,13 @@ enable-method = "psci"; #cooling-cells = <2>; cpu-idle-states = <&cpu_pd_wait>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_cache_l0>; }; A55_1: cpu@100 { @@ -78,8 +85,43 @@ enable-method = "psci"; #cooling-cells = <2>; cpu-idle-states = <&cpu_pd_wait>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_cache_l1>; }; + l2_cache_l0: l2-cache-l0 { + compatible = "cache"; + cache-size = <65536>; + cache-line-size = <64>; + cache-sets = <256>; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_cache>; + }; + + l2_cache_l1: l2-cache-l1 { + compatible = "cache"; + cache-size = <65536>; + cache-line-size = <64>; + cache-sets = <256>; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_cache>; + }; + + l3_cache: l3-cache { + compatible = "cache"; + cache-size = <262144>; + cache-line-size = <64>; + cache-sets = <256>; + cache-level = <3>; + cache-unified; + }; }; osc_32k: clock-osc-32k { @@ -425,6 +467,7 @@ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; dmas = <&edma1 22 0 FSL_EDMA_RX>, <&edma1 21 0 0>; dma-names = "rx", "tx"; + #sound-dai-cells = <0>; status = "disabled"; }; @@ -524,6 +567,7 @@ clock-names = "ipg_clk", "ipg_clk_app", "pll8k"; dmas = <&edma1 29 0 5>; dma-names = "rx"; + #sound-dai-cells = <0>; status = "disabled"; }; @@ -846,6 +890,7 @@ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; dmas = <&edma2 59 0 FSL_EDMA_RX>, <&edma2 58 0 0>; dma-names = "rx", "tx"; + #sound-dai-cells = <0>; status = "disabled"; }; @@ -859,6 +904,7 @@ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; dmas = <&edma2 61 0 FSL_EDMA_RX>, <&edma2 60 0 0>; dma-names = "rx", "tx"; + #sound-dai-cells = <0>; status = "disabled"; }; @@ -878,6 +924,7 @@ clock-names = "ipg", "phy", "spba", "pll_ipg"; dmas = <&edma2 65 0 FSL_EDMA_RX>, <&edma2 66 0 0>; dma-names = "rx", "tx"; + #sound-dai-cells = <0>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts index d14a54ab4fd4..37a1d4ca1b20 100644 --- a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts @@ -5,6 +5,7 @@ /dts-v1/; +#include <dt-bindings/pwm/pwm.h> #include "imx95.dtsi" / { @@ -17,6 +18,11 @@ serial0 = &lpuart1; }; + bt_sco_codec: audio-codec-bt-sco { + #sound-dai-cells = <1>; + compatible = "linux,bt-sco"; + }; + chosen { stdout-path = &lpuart1; }; @@ -26,6 +32,13 @@ reg = <0x0 0x80000000 0 0x80000000>; }; + fan0: pwm-fan { + compatible = "pwm-fan"; + #cooling-cells = <2>; + pwms = <&tpm6 2 4000000 PWM_POLARITY_INVERTED>; + cooling-levels = <64 128 192 255>; + }; + reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -40,6 +53,34 @@ }; }; + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+V3.3_SW"; + }; + + reg_audio_pwr: regulator-audio-pwr { + compatible = "regulator-fixed"; + regulator-name = "audio-pwr"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&i2c4_gpio_expander_21 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_audio_slot: regulator-audio-slot { + compatible = "regulator-fixed"; + regulator-name = "audio-wm8962"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&i2c4_gpio_expander_21 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + status = "disabled"; + }; + reg_m2_pwr: regulator-m2-pwr { compatible = "regulator-fixed"; regulator-name = "M.2-power"; @@ -79,6 +120,116 @@ enable-active-high; off-on-delay-us = <12000>; }; + + sound-bt-sco { + compatible = "simple-audio-card"; + simple-audio-card,name = "bt-sco-audio"; + simple-audio-card,format = "dsp_a"; + simple-audio-card,bitclock-inversion; + simple-audio-card,frame-master = <&btcpu>; + simple-audio-card,bitclock-master = <&btcpu>; + + btcpu: simple-audio-card,cpu { + sound-dai = <&sai1>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <16>; + }; + + simple-audio-card,codec { + sound-dai = <&bt_sco_codec 1>; + }; + }; + + sound-micfil { + compatible = "fsl,imx-audio-card"; + model = "micfil-audio"; + + pri-dai-link { + link-name = "micfil hifi"; + format = "i2s"; + cpu { + sound-dai = <&micfil>; + }; + }; + }; + + sound-wm8962 { + compatible = "fsl,imx-audio-wm8962"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hp>; + model = "wm8962-audio"; + audio-cpu = <&sai3>; + audio-codec = <&wm8962>; + hp-det-gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; + audio-routing = "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "Ext Spk", "SPKOUTL", + "Ext Spk", "SPKOUTR", + "AMIC", "MICBIAS", + "IN3R", "AMIC", + "IN1R", "AMIC"; + }; +}; + +&flexspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi1>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi1_reset>; + reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <200000000>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + }; +}; + +&lpi2c4 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c4>; + status = "okay"; + + wm8962: audio-codec@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + clocks = <&scmi_clk IMX95_CLK_SAI3>; + DCVDD-supply = <®_audio_pwr>; + DBVDD-supply = <®_audio_pwr>; + AVDD-supply = <®_audio_pwr>; + CPVDD-supply = <®_audio_pwr>; + MICVDD-supply = <®_audio_pwr>; + PLLVDD-supply = <®_audio_pwr>; + SPKVDD1-supply = <®_audio_pwr>; + SPKVDD2-supply = <®_audio_pwr>; + gpio-cfg = < 0x0000 /* 0:Default */ + 0x0000 /* 1:Default */ + 0x0000 /* 2:FN_DMICCLK */ + 0x0000 /* 3:Default */ + 0x0000 /* 4:FN_DMICCDAT */ + 0x0000 /* 5:Default */ + >; + }; + + i2c4_gpio_expander_21: gpio@21 { + compatible = "nxp,pcal6408"; + reg = <0x21>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpio2>; + interrupts = <18 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4_pcal6408>; + vcc-supply = <®_3p3v>; + }; }; &lpi2c7 { @@ -108,6 +259,23 @@ status = "okay"; }; +&micfil { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pdm>; + assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>, + <&scmi_clk IMX95_CLK_AUDIOPLL2>, + <&scmi_clk IMX95_CLK_PDM>; + assigned-clock-parents = <0>, <0>, <0>, <0>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>; + assigned-clock-rates = <3932160000>, + <3612672000>, <393216000>, + <361267200>, <49152000>; + status = "okay"; +}; + &mu7 { status = "okay"; }; @@ -128,6 +296,42 @@ status = "okay"; }; +&sai1 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>, + <&scmi_clk IMX95_CLK_AUDIOPLL2>, + <&scmi_clk IMX95_CLK_SAI1>; + assigned-clock-parents = <0>, <0>, <0>, <0>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>; + assigned-clock-rates = <3932160000>, + <3612672000>, <393216000>, + <361267200>, <12288000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + +&sai3 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>, + <&scmi_clk IMX95_CLK_AUDIOPLL2>, + <&scmi_clk IMX95_CLK_SAI3>; + assigned-clock-parents = <0>, <0>, <0>, <0>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>; + assigned-clock-rates = <3932160000>, + <3612672000>, <393216000>, + <361267200>, <12288000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + &usdhc1 { pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; pinctrl-0 = <&pinctrl_usdhc1>; @@ -159,12 +363,53 @@ }; &scmi_iomuxc { + pinctrl_flexspi1: flexspi1grp { + fsl,pins = < + IMX95_PAD_XSPI1_SS0_B__FLEXSPI1_A_SS0_B 0x3fe + IMX95_PAD_XSPI1_SCLK__FLEXSPI1_A_SCLK 0x3fe + IMX95_PAD_XSPI1_DQS__FLEXSPI1_A_DQS 0x3fe + IMX95_PAD_XSPI1_DATA0__FLEXSPI1_A_DATA_BIT0 0x3fe + IMX95_PAD_XSPI1_DATA1__FLEXSPI1_A_DATA_BIT1 0x3fe + IMX95_PAD_XSPI1_DATA2__FLEXSPI1_A_DATA_BIT2 0x3fe + IMX95_PAD_XSPI1_DATA3__FLEXSPI1_A_DATA_BIT3 0x3fe + IMX95_PAD_XSPI1_DATA4__FLEXSPI1_A_DATA_BIT4 0x3fe + IMX95_PAD_XSPI1_DATA5__FLEXSPI1_A_DATA_BIT5 0x3fe + IMX95_PAD_XSPI1_DATA6__FLEXSPI1_A_DATA_BIT6 0x3fe + IMX95_PAD_XSPI1_DATA7__FLEXSPI1_A_DATA_BIT7 0x3fe + >; + }; + + pinctrl_flexspi1_reset: flexspi1-reset-grp { + fsl,pins = < + IMX95_PAD_XSPI1_SS1_B__GPIO5_IO_BIT11 0x3fe + >; + }; + + pinctrl_hp: hpgrp { + fsl,pins = < + IMX95_PAD_GPIO_IO11__GPIO2_IO_BIT11 0x31e + >; + }; + + pinctrl_i2c4_pcal6408: i2c4pcal6498grp { + fsl,pins = < + IMX95_PAD_GPIO_IO18__GPIO2_IO_BIT18 0x31e + >; + }; + pinctrl_i2c7_pcal6524: i2c7pcal6524grp { fsl,pins = < IMX95_PAD_GPIO_IO36__GPIO5_IO_BIT16 0x31e >; }; + pinctrl_lpi2c4: lpi2c4grp { + fsl,pins = < + IMX95_PAD_GPIO_IO30__LPI2C4_SDA 0x40000b9e + IMX95_PAD_GPIO_IO31__LPI2C4_SCL 0x40000b9e + >; + }; + pinctrl_lpi2c7: lpi2c7grp { fsl,pins = < IMX95_PAD_GPIO_IO08__LPI2C7_SDA 0x40000b9e @@ -184,6 +429,54 @@ >; }; + pinctrl_pdm: pdmgrp { + fsl,pins = < + IMX95_PAD_PDM_CLK__AONMIX_TOP_PDM_CLK 0x31e + IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_PDM_BIT_STREAM_BIT0 0x31e + >; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = < + IMX95_PAD_SAI1_RXD0__AONMIX_TOP_SAI1_RX_DATA_BIT0 0x31e + IMX95_PAD_SAI1_TXC__AONMIX_TOP_SAI1_TX_BCLK 0x31e + IMX95_PAD_SAI1_TXFS__AONMIX_TOP_SAI1_TX_SYNC 0x31e + IMX95_PAD_SAI1_TXD0__AONMIX_TOP_SAI1_TX_DATA_BIT0 0x31e + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + IMX95_PAD_ENET2_MDIO__NETCMIX_TOP_SAI2_RX_BCLK 0x31e + IMX95_PAD_ENET2_MDC__NETCMIX_TOP_SAI2_RX_SYNC 0x31e + IMX95_PAD_ENET2_TD3__NETCMIX_TOP_SAI2_RX_DATA_BIT0 0x31e + IMX95_PAD_ENET2_TD2__NETCMIX_TOP_SAI2_RX_DATA_BIT1 0x31e + IMX95_PAD_ENET2_TXC__NETCMIX_TOP_SAI2_TX_BCLK 0x31e + IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_SAI2_TX_SYNC 0x31e + IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_SAI2_TX_DATA_BIT0 0x31e + IMX95_PAD_ENET2_RXC__NETCMIX_TOP_SAI2_TX_DATA_BIT1 0x31e + IMX95_PAD_ENET2_RD0__NETCMIX_TOP_SAI2_TX_DATA_BIT2 0x31e + IMX95_PAD_ENET2_RD1__NETCMIX_TOP_SAI2_TX_DATA_BIT3 0x31e + IMX95_PAD_ENET2_RD2__NETCMIX_TOP_SAI2_MCLK 0x31e + >; + }; + + pinctrl_sai3: sai3grp { + fsl,pins = < + IMX95_PAD_GPIO_IO17__SAI3_MCLK 0x31e + IMX95_PAD_GPIO_IO16__SAI3_TX_BCLK 0x31e + IMX95_PAD_GPIO_IO26__SAI3_TX_SYNC 0x31e + IMX95_PAD_GPIO_IO20__SAI3_RX_DATA_BIT0 0x31e + IMX95_PAD_GPIO_IO21__SAI3_TX_DATA_BIT0 0x31e + >; + }; + + pinctrl_tpm6: tpm6grp { + fsl,pins = < + IMX95_PAD_GPIO_IO19__TPM6_CH2 0x51e + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < IMX95_PAD_UART1_RXD__AONMIX_TOP_LPUART1_RX 0x31e @@ -287,3 +580,50 @@ >; }; }; + +&thermal_zones { + a55-thermal { + trips { + atrip2: trip2 { + temperature = <55000>; + hysteresis = <2000>; + type = "active"; + }; + + atrip3: trip3 { + temperature = <65000>; + hysteresis = <2000>; + type = "active"; + }; + + atrip4: trip4 { + temperature = <75000>; + hysteresis = <2000>; + type = "active"; + }; + }; + + cooling-maps { + map1 { + trip = <&atrip2>; + cooling-device = <&fan0 0 1>; + }; + + map2 { + trip = <&atrip3>; + cooling-device = <&fan0 1 2>; + }; + + map3 { + trip = <&atrip4>; + cooling-device = <&fan0 2 3>; + }; + }; + }; +}; + +&tpm6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tpm6>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi index 425272aa5a81..03661e76550f 100644 --- a/arch/arm64/boot/dts/freescale/imx95.dtsi +++ b/arch/arm64/boot/dts/freescale/imx95.dtsi @@ -3,6 +3,7 @@ * Copyright 2024 NXP */ +#include <dt-bindings/dma/fsl-edma.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -221,6 +222,13 @@ }; }; + dummy: clock-dummy { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "dummy"; + }; + clk_ext1: clock-ext1 { compatible = "fixed-clock"; #clock-cells = <0>; @@ -281,7 +289,7 @@ firmware { scmi { compatible = "arm,scmi"; - mboxes = <&mu2 5 0>, <&mu2 3 0>, <&mu2 3 1>; + mboxes = <&mu2 5 0>, <&mu2 3 0>, <&mu2 3 1>, <&mu2 5 1>; shmem = <&scmi_buf0>, <&scmi_buf1>; #address-cells = <1>; #size-cells = <0>; @@ -318,7 +326,7 @@ interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; }; - thermal-zones { + thermal_zones: thermal-zones { a55-thermal { polling-delay-passive = <250>; polling-delay = <2000>; @@ -405,6 +413,152 @@ #address-cells = <1>; #size-cells = <1>; + edma2: dma-controller@42000000 { + compatible = "fsl,imx95-edma5"; + reg = <0x42000000 0x210000>; + #dma-cells = <3>; + dma-channels = <64>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>; + clock-names = "dma"; + }; + + edma3: dma-controller@42210000 { + compatible = "fsl,imx95-edma5"; + reg = <0x42210000 0x210000>; + #dma-cells = <3>; + dma-channels = <64>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>; + clock-names = "dma"; + }; + mu7: mailbox@42430000 { compatible = "fsl,imx95-mu"; reg = <0x42430000 0x10000>; @@ -464,6 +618,8 @@ clock-names = "per", "ipg"; #address-cells = <1>; #size-cells = <0>; + dmas = <&edma2 8 0 0>, <&edma2 9 0 FSL_EDMA_RX>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -476,6 +632,8 @@ clock-names = "per", "ipg"; #address-cells = <1>; #size-cells = <0>; + dmas = <&edma2 10 0 0>, <&edma2 11 0 FSL_EDMA_RX>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -488,6 +646,8 @@ clocks = <&scmi_clk IMX95_CLK_LPSPI3>, <&scmi_clk IMX95_CLK_BUSWAKEUP>; clock-names = "per", "ipg"; + dmas = <&edma2 12 0 0>, <&edma2 13 0 FSL_EDMA_RX>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -500,6 +660,8 @@ clocks = <&scmi_clk IMX95_CLK_LPSPI4>, <&scmi_clk IMX95_CLK_BUSWAKEUP>; clock-names = "per", "ipg"; + dmas = <&edma2 14 0 0>, <&edma2 15 0 FSL_EDMA_RX>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -510,6 +672,8 @@ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; clocks = <&scmi_clk IMX95_CLK_LPUART3>; clock-names = "ipg"; + dmas = <&edma2 18 0 FSL_EDMA_RX>, <&edma2 17 0 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -520,6 +684,8 @@ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&scmi_clk IMX95_CLK_LPUART4>; clock-names = "ipg"; + dmas = <&edma2 20 0 FSL_EDMA_RX>, <&edma2 19 0 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -530,6 +696,8 @@ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; clocks = <&scmi_clk IMX95_CLK_LPUART5>; clock-names = "ipg"; + dmas = <&edma2 22 0 FSL_EDMA_RX>, <&edma2 21 0 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -540,6 +708,110 @@ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; clocks = <&scmi_clk IMX95_CLK_LPUART6>; clock-names = "ipg"; + dmas = <&edma2 24 0 FSL_EDMA_RX>, <&edma2 23 0 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + flexcan2: can@425b0000 { + compatible = "fsl,imx95-flexcan"; + reg = <0x425b0000 0x10000>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, + <&scmi_clk IMX95_CLK_CAN2>; + clock-names = "ipg", "per"; + assigned-clocks = <&scmi_clk IMX95_CLK_CAN2>; + assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>; + assigned-clock-rates = <40000000>; + fsl,clk-source = /bits/ 8 <0>; + status = "disabled"; + }; + + flexcan3: can@42600000 { + compatible = "fsl,imx95-flexcan"; + reg = <0x42600000 0x10000>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, + <&scmi_clk IMX95_CLK_CAN3>; + clock-names = "ipg", "per"; + assigned-clocks = <&scmi_clk IMX95_CLK_CAN3>; + assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>; + assigned-clock-rates = <40000000>; + fsl,clk-source = /bits/ 8 <0>; + status = "disabled"; + }; + + flexspi1: spi@425e0000 { + compatible = "nxp,imx8mm-fspi"; + reg = <0x425e0000 0x10000>, <0x28000000 0x8000000>; + reg-names = "fspi_base", "fspi_mmap"; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_FLEXSPI1>, + <&scmi_clk IMX95_CLK_FLEXSPI1>; + clock-names = "fspi_en", "fspi"; + assigned-clocks = <&scmi_clk IMX95_CLK_FLEXSPI1>; + assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1>; + assigned-clock-rates = <200000000>; + status = "disabled"; + }; + + sai3: sai@42650000 { + compatible = "fsl,imx95-sai"; + reg = <0x42650000 0x10000>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, <&dummy>, + <&scmi_clk IMX95_CLK_SAI3>, <&dummy>, + <&dummy>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&edma2 61 0 FSL_EDMA_RX>, <&edma2 60 0 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai4: sai@42660000 { + compatible = "fsl,imx95-sai"; + reg = <0x42660000 0x10000>; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, <&dummy>, + <&scmi_clk IMX95_CLK_SAI4>, <&dummy>, + <&dummy>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&edma2 68 0 FSL_EDMA_RX>, <&edma2 67 0 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai5: sai@42670000 { + compatible = "fsl,imx95-sai"; + reg = <0x42670000 0x10000>; + interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, <&dummy>, + <&scmi_clk IMX95_CLK_SAI5>, <&dummy>, + <&dummy>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&edma2 70 0 FSL_EDMA_RX>, <&edma2 69 0 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + xcvr: xcvr@42680000 { + compatible = "fsl,imx95-xcvr"; + reg = <0x42680000 0x800>, <0x42680800 0x400>, + <0x42680c00 0x080>, <0x42680e00 0x080>; + reg-names = "ram", "regs", "rxfifo", "txfifo"; + interrupts = /* XCVR IRQ 0 */ + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + /* XCVR IRQ 1 */ + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, + <&scmi_clk IMX95_CLK_SPDIF>, + <&dummy>, + <&scmi_clk IMX95_CLK_AUDIOXCVR>; + clock-names = "ipg", "phy", "spba", "pll_ipg"; + dmas = <&edma2 65 0 1>, <&edma2 66 0 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -550,6 +822,8 @@ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; clocks = <&scmi_clk IMX95_CLK_LPUART7>; clock-names = "ipg"; + dmas = <&edma2 26 0 FSL_EDMA_RX>, <&edma2 25 0 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -560,6 +834,8 @@ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; clocks = <&scmi_clk IMX95_CLK_LPUART8>; clock-names = "ipg"; + dmas = <&edma2 28 0 FSL_EDMA_RX>, <&edma2 27 0 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -572,6 +848,8 @@ clock-names = "per", "ipg"; #address-cells = <1>; #size-cells = <0>; + dmas = <&edma2 71 0 0>, <&edma2 72 0 FSL_EDMA_RX>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -584,6 +862,8 @@ clock-names = "per", "ipg"; #address-cells = <1>; #size-cells = <0>; + dmas = <&edma2 73 0 0>, <&edma2 74 0 FSL_EDMA_RX>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -596,6 +876,8 @@ clock-names = "per", "ipg"; #address-cells = <1>; #size-cells = <0>; + dmas = <&edma2 75 0 0>, <&edma2 76 0 FSL_EDMA_RX>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -608,6 +890,8 @@ clock-names = "per", "ipg"; #address-cells = <1>; #size-cells = <0>; + dmas = <&edma2 77 0 0>, <&edma2 78 0 FSL_EDMA_RX>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -620,6 +904,8 @@ clocks = <&scmi_clk IMX95_CLK_LPSPI5>, <&scmi_clk IMX95_CLK_BUSWAKEUP>; clock-names = "per", "ipg"; + dmas = <&edma2 79 0 0>, <&edma2 80 0 FSL_EDMA_RX>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -632,6 +918,8 @@ clocks = <&scmi_clk IMX95_CLK_LPSPI6>, <&scmi_clk IMX95_CLK_BUSWAKEUP>; clock-names = "per", "ipg"; + dmas = <&edma2 81 0 0>, <&edma2 82 0 FSL_EDMA_RX>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -644,6 +932,8 @@ clocks = <&scmi_clk IMX95_CLK_LPSPI7>, <&scmi_clk IMX95_CLK_BUSWAKEUP>; clock-names = "per", "ipg"; + dmas = <&edma2 83 0 0>, <&edma2 84 0 FSL_EDMA_RX>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -656,6 +946,8 @@ clocks = <&scmi_clk IMX95_CLK_LPSPI8>, <&scmi_clk IMX95_CLK_BUSWAKEUP>; clock-names = "per", "ipg"; + dmas = <&edma2 85 0 0>, <&edma2 86 0 FSL_EDMA_RX>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -667,6 +959,34 @@ #mbox-cells = <2>; status = "disabled"; }; + + flexcan4: can@427c0000 { + compatible = "fsl,imx95-flexcan"; + reg = <0x427c0000 0x10000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, + <&scmi_clk IMX95_CLK_CAN4>; + clock-names = "ipg", "per"; + assigned-clocks = <&scmi_clk IMX95_CLK_CAN4>; + assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>; + assigned-clock-rates = <40000000>; + fsl,clk-source = /bits/ 8 <0>; + status = "disabled"; + }; + + flexcan5: can@427d0000 { + compatible = "fsl,imx95-flexcan"; + reg = <0x427d0000 0x10000>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, + <&scmi_clk IMX95_CLK_CAN5>; + clock-names = "ipg", "per"; + assigned-clocks = <&scmi_clk IMX95_CLK_CAN5>; + assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>; + assigned-clock-rates = <40000000>; + fsl,clk-source = /bits/ 8 <0>; + status = "disabled"; + }; }; aips3: bus@42800000 { @@ -796,6 +1116,46 @@ #address-cells = <1>; #size-cells = <1>; + edma1: dma-controller@44000000 { + compatible = "fsl,imx93-edma3"; + reg = <0x44000000 0x200000>; + #dma-cells = <3>; + dma-channels = <31>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_BUSAON>; + clock-names = "dma"; + }; + mu1: mailbox@44220000 { compatible = "fsl,imx95-mu"; reg = <0x44220000 0x10000>; @@ -830,6 +1190,8 @@ clock-names = "per", "ipg"; #address-cells = <1>; #size-cells = <0>; + dmas = <&edma1 12 0 0>, <&edma1 13 0 FSL_EDMA_RX> ; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -842,6 +1204,8 @@ clock-names = "per", "ipg"; #address-cells = <1>; #size-cells = <0>; + dmas = <&edma1 14 0 0>, <&edma1 15 0 FSL_EDMA_RX> ; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -854,6 +1218,8 @@ clocks = <&scmi_clk IMX95_CLK_LPSPI1>, <&scmi_clk IMX95_CLK_BUSAON>; clock-names = "per", "ipg"; + dmas = <&edma1 16 0 FSL_EDMA_RX>, <&edma1 17 0 0> ; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -866,6 +1232,8 @@ clocks = <&scmi_clk IMX95_CLK_LPSPI2>, <&scmi_clk IMX95_CLK_BUSAON>; clock-names = "per", "ipg"; + dmas = <&edma1 18 0 FSL_EDMA_RX>, <&edma1 19 0 0> ; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -876,6 +1244,8 @@ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&scmi_clk IMX95_CLK_LPUART1>; clock-names = "ipg"; + dmas = <&edma1 21 0 FSL_EDMA_RX>, <&edma1 20 0 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -886,6 +1256,54 @@ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&scmi_clk IMX95_CLK_LPUART2>; clock-names = "ipg"; + dmas = <&edma1 23 0 FSL_EDMA_RX>, <&edma1 22 0 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + flexcan1: can@443a0000 { + compatible = "fsl,imx95-flexcan"; + reg = <0x443a0000 0x10000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_BUSAON>, + <&scmi_clk IMX95_CLK_CAN1>; + clock-names = "ipg", "per"; + assigned-clocks = <&scmi_clk IMX95_CLK_CAN1>; + assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>; + assigned-clock-rates = <40000000>; + fsl,clk-source = /bits/ 8 <0>; + status = "disabled"; + }; + + sai1: sai@443b0000 { + compatible = "fsl,imx95-sai"; + reg = <0x443b0000 0x10000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_BUSAON>, <&dummy>, + <&scmi_clk IMX95_CLK_SAI1>, <&dummy>, + <&dummy>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&edma1 25 0 FSL_EDMA_RX>, <&edma1 24 0 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + micfil: micfil@44520000 { + compatible = "fsl,imx95-micfil", "fsl,imx93-micfil"; + reg = <0x44520000 0x10000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_BUSAON>, + <&scmi_clk IMX95_CLK_PDM>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>, + <&scmi_clk IMX95_CLK_AUDIOPLL2>, + <&dummy>; + clock-names = "ipg_clk", "ipg_clk_app", + "pll8k", "pll11k", "clkext3"; + dmas = <&edma1 6 0 5>; + dma-names = "rx"; status = "disabled"; }; @@ -1188,5 +1606,37 @@ power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>; status = "disabled"; }; + + netcmix_blk_ctrl: syscon@4c810000 { + compatible = "nxp,imx95-netcmix-blk-ctrl", "syscon"; + reg = <0x0 0x4c810000 0x0 0x10000>; + #clock-cells = <1>; + clocks = <&scmi_clk IMX95_CLK_BUSNETCMIX>; + assigned-clocks = <&scmi_clk IMX95_CLK_BUSNETCMIX>; + assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>; + assigned-clock-rates = <133333333>; + power-domains = <&scmi_devpd IMX95_PD_NETC>; + status = "disabled"; + }; + + sai2: sai@4c880000 { + compatible = "fsl,imx95-sai"; + reg = <0x0 0x4c880000 0x0 0x10000>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_BUSNETCMIX>, <&dummy>, + <&scmi_clk IMX95_CLK_SAI2>, <&dummy>, + <&dummy>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + power-domains = <&scmi_devpd IMX95_PD_NETC>; + dmas = <&edma2 59 0 FSL_EDMA_RX>, <&edma2 58 0 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + ddr-pmu@4e090dc0 { + compatible = "fsl,imx95-ddr-pmu", "fsl,imx93-ddr-pmu"; + reg = <0x0 0x4e090dc0 0x0 0x200>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi index 815241526a0d..c60c7a9e54af 100644 --- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi +++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi @@ -185,6 +185,8 @@ reset-gpios = <&expander2 7 GPIO_ACTIVE_LOW>; reset-assert-us = <500000>; reset-deassert-us = <500>; + interrupt-parent = <&expander2>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; }; }; }; @@ -237,7 +239,6 @@ }; &i2c2 { - clock-frequency = <100000>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; pinctrl-1 = <&pinctrl_i2c2_gpio>; @@ -258,6 +259,11 @@ reg = <0x1f>; }; + /* + * TUSB8041 is at 0x41, but not connected by default + * Note: TUSB8041 only supports 100 kHz! + */ + eeprom3: eeprom@57 { compatible = "nxp,se97b", "atmel,24c02"; reg = <0x57>; @@ -274,7 +280,6 @@ }; &i2c3 { - clock-frequency = <100000>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c3>; pinctrl-1 = <&pinctrl_i2c3_gpio>; diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi index 65f7b5a50eb5..1b2b20c6126d 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi @@ -27,6 +27,7 @@ fman@1a00000 { reg = <0xf0000 0x1000>; fsl,fman-ports = <&fman0_rx_0x10 &fman0_tx_0x30>; pcsphy-handle = <&pcsphy6>; + pcs-handle = <&pcsphy6>; }; mdio@f1000 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi index 3f70482c98c3..55d78f6f7c6c 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi @@ -27,6 +27,7 @@ fman@1a00000 { reg = <0xf2000 0x1000>; fsl,fman-ports = <&fman0_rx_0x11 &fman0_tx_0x31>; pcsphy-handle = <&pcsphy7>; + pcs-handle = <&pcsphy7>; }; mdio@f3000 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi index 78841c1f3252..18916a860c2e 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi @@ -26,6 +26,7 @@ fman@1a00000 { fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>; ptp-timer = <&ptp_timer0>; pcsphy-handle = <&pcsphy0>; + pcs-handle = <&pcsphy0>; }; mdio@e1000 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi index 1f43fa666222..e90af445a293 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi @@ -26,6 +26,7 @@ fman@1a00000 { fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>; ptp-timer = <&ptp_timer0>; pcsphy-handle = <&pcsphy1>; + pcs-handle = <&pcsphy1>; }; mdio@e3000 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi index de0aa017701d..fec93905bc81 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi @@ -26,6 +26,7 @@ fman@1a00000 { fsl,fman-ports = <&fman0_rx_0x0a &fman0_tx_0x2a>; ptp-timer = <&ptp_timer0>; pcsphy-handle = <&pcsphy2>; + pcs-handle = <&pcsphy2>; }; mdio@e5000 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi index 6904aa5d8e54..2aa953faa62b 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi @@ -26,6 +26,7 @@ fman@1a00000 { fsl,fman-ports = <&fman0_rx_0x0b &fman0_tx_0x2b>; ptp-timer = <&ptp_timer0>; pcsphy-handle = <&pcsphy3>; + pcs-handle = <&pcsphy3>; }; mdio@e7000 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi index a3d29d470297..948e39411415 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi @@ -26,6 +26,7 @@ fman@1a00000 { fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>; ptp-timer = <&ptp_timer0>; pcsphy-handle = <&pcsphy4>; + pcs-handle = <&pcsphy4>; }; mdio@e9000 { diff --git a/arch/arm64/boot/dts/freescale/s32g2.dtsi b/arch/arm64/boot/dts/freescale/s32g2.dtsi index fc19ae2e8d3b..fa054bfe7d5c 100644 --- a/arch/arm64/boot/dts/freescale/s32g2.dtsi +++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi @@ -114,6 +114,56 @@ #size-cells = <1>; ranges = <0 0 0 0x80000000>; + pinctrl: pinctrl@4009c240 { + compatible = "nxp,s32g2-siul2-pinctrl"; + /* MSCR0-MSCR101 registers on siul2_0 */ + reg = <0x4009c240 0x198>, + /* MSCR112-MSCR122 registers on siul2_1 */ + <0x44010400 0x2c>, + /* MSCR144-MSCR190 registers on siul2_1 */ + <0x44010480 0xbc>, + /* IMCR0-IMCR83 registers on siul2_0 */ + <0x4009ca40 0x150>, + /* IMCR119-IMCR397 registers on siul2_1 */ + <0x44010c1c 0x45c>, + /* IMCR430-IMCR495 registers on siul2_1 */ + <0x440110f8 0x108>; + + jtag_pins: jtag-pins { + jtag-grp0 { + pinmux = <0x0>; + input-enable; + bias-pull-up; + slew-rate = <166>; + }; + + jtag-grp1 { + pinmux = <0x11>; + slew-rate = <166>; + }; + + jtag-grp2 { + pinmux = <0x40>; + input-enable; + bias-pull-down; + slew-rate = <166>; + }; + + jtag-grp3 { + pinmux = <0x23c0>, + <0x23d0>, + <0x2320>; + }; + + jtag-grp4 { + pinmux = <0x51>; + input-enable; + bias-pull-up; + slew-rate = <166>; + }; + }; + }; + uart0: serial@401c8000 { compatible = "nxp,s32g2-linflexuart", "fsl,s32v234-linflexuart"; diff --git a/arch/arm64/boot/dts/freescale/s32g274a-evb.dts b/arch/arm64/boot/dts/freescale/s32g274a-evb.dts index 00070c949e2a..dbe498798bd9 100644 --- a/arch/arm64/boot/dts/freescale/s32g274a-evb.dts +++ b/arch/arm64/boot/dts/freescale/s32g274a-evb.dts @@ -34,5 +34,6 @@ }; &usdhc0 { + disable-wp; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts b/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts index b3fc12899cae..ab1e5caaeae7 100644 --- a/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts +++ b/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts @@ -40,5 +40,6 @@ }; &usdhc0 { + disable-wp; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/s32g3.dtsi b/arch/arm64/boot/dts/freescale/s32g3.dtsi index c1b08992754b..b4226a9143c8 100644 --- a/arch/arm64/boot/dts/freescale/s32g3.dtsi +++ b/arch/arm64/boot/dts/freescale/s32g3.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* - * Copyright 2021-2023 NXP + * Copyright 2021-2024 NXP * * Authors: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com> * Ciprian Costea <ciprianmarian.costea@nxp.com> @@ -171,6 +171,56 @@ #size-cells = <1>; ranges = <0 0 0 0x80000000>; + pinctrl: pinctrl@4009c240 { + compatible = "nxp,s32g2-siul2-pinctrl"; + /* MSCR0-MSCR101 registers on siul2_0 */ + reg = <0x4009c240 0x198>, + /* MSCR112-MSCR122 registers on siul2_1 */ + <0x44010400 0x2c>, + /* MSCR144-MSCR190 registers on siul2_1 */ + <0x44010480 0xbc>, + /* IMCR0-IMCR83 registers on siul2_0 */ + <0x4009ca40 0x150>, + /* IMCR119-IMCR397 registers on siul2_1 */ + <0x44010c1c 0x45c>, + /* IMCR430-IMCR495 registers on siul2_1 */ + <0x440110f8 0x108>; + + jtag_pins: jtag-pins { + jtag-grp0 { + pinmux = <0x0>; + input-enable; + bias-pull-up; + slew-rate = <166>; + }; + + jtag-grp1 { + pinmux = <0x11>; + slew-rate = <166>; + }; + + jtag-grp2 { + pinmux = <0x40>; + input-enable; + bias-pull-down; + slew-rate = <166>; + }; + + jtag-grp3 { + pinmux = <0x23c0>, + <0x23d0>, + <0x2320>; + }; + + jtag-grp4 { + pinmux = <0x51>; + input-enable; + bias-pull-up; + slew-rate = <166>; + }; + }; + }; + uart0: serial@401c8000 { compatible = "nxp,s32g3-linflexuart", "fsl,s32v234-linflexuart"; diff --git a/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts b/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts index 9d674819876e..176e5af191c8 100644 --- a/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts +++ b/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* - * Copyright 2021-2023 NXP + * Copyright 2021-2024 NXP * * NXP S32G3 Reference Design Board 3 (S32G-VNP-RDB3) */ @@ -41,5 +41,6 @@ &usdhc0 { bus-width = <8>; + disable-wp; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/s32v234.dtsi b/arch/arm64/boot/dts/freescale/s32v234.dtsi index 42409ec56792..bf608ded5dda 100644 --- a/arch/arm64/boot/dts/freescale/s32v234.dtsi +++ b/arch/arm64/boot/dts/freescale/s32v234.dtsi @@ -89,7 +89,7 @@ }; gic: interrupt-controller@7d001000 { - compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + compatible = "arm,cortex-a15-gic"; #interrupt-cells = <3>; #address-cells = <0>; interrupt-controller; diff --git a/arch/arm64/boot/dts/mediatek/mt6357.dtsi b/arch/arm64/boot/dts/mediatek/mt6357.dtsi index 3330a03c2f74..5fafa842d312 100644 --- a/arch/arm64/boot/dts/mediatek/mt6357.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt6357.dtsi @@ -10,6 +10,11 @@ mt6357_pmic: pmic { compatible = "mediatek,mt6357"; + pmic_adc: adc { + compatible = "mediatek,mt6357-auxadc"; + #io-channel-cells = <1>; + }; + regulators { mt6357_vproc_reg: buck-vproc { regulator-name = "vproc"; diff --git a/arch/arm64/boot/dts/mediatek/mt6358.dtsi b/arch/arm64/boot/dts/mediatek/mt6358.dtsi index a1b96013f814..641d452fbc08 100644 --- a/arch/arm64/boot/dts/mediatek/mt6358.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt6358.dtsi @@ -10,6 +10,11 @@ interrupt-controller; #interrupt-cells = <2>; + pmic_adc: adc { + compatible = "mediatek,mt6358-auxadc"; + #io-channel-cells = <1>; + }; + mt6358codec: mt6358codec { compatible = "mediatek,mt6358-sound"; mediatek,dmic-mode = <0>; /* two-wires */ diff --git a/arch/arm64/boot/dts/mediatek/mt6359.dtsi b/arch/arm64/boot/dts/mediatek/mt6359.dtsi index df3e822232d3..8e1b8c85c6ed 100644 --- a/arch/arm64/boot/dts/mediatek/mt6359.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt6359.dtsi @@ -9,6 +9,11 @@ interrupt-controller; #interrupt-cells = <2>; + pmic_adc: adc { + compatible = "mediatek,mt6359-auxadc"; + #io-channel-cells = <1>; + }; + mt6359codec: mt6359codec { }; diff --git a/arch/arm64/boot/dts/mediatek/mt7981b.dtsi b/arch/arm64/boot/dts/mediatek/mt7981b.dtsi index 64aeeb24efac..b096009ef99c 100644 --- a/arch/arm64/boot/dts/mediatek/mt7981b.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7981b.dtsi @@ -109,6 +109,48 @@ status = "disabled"; }; + spi@11009000 { + compatible = "mediatek,mt7981-spi-ipm", "mediatek,spi-ipm"; + reg = <0 0x11009000 0 0x1000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&topckgen CLK_TOP_CB_M_D2>, + <&topckgen CLK_TOP_SPI_SEL>, + <&infracfg CLK_INFRA_SPI2_CK>, + <&infracfg CLK_INFRA_SPI2_HCK_CK>; + clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi@1100a000 { + compatible = "mediatek,mt7981-spi-ipm", "mediatek,spi-ipm"; + reg = <0 0x1100a000 0 0x1000>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&topckgen CLK_TOP_CB_M_D2>, + <&topckgen CLK_TOP_SPI_SEL>, + <&infracfg CLK_INFRA_SPI0_CK>, + <&infracfg CLK_INFRA_SPI0_HCK_CK>; + clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi@1100b000 { + compatible = "mediatek,mt7981-spi-ipm", "mediatek,spi-ipm"; + reg = <0 0x1100b000 0 0x1000>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&topckgen CLK_TOP_CB_M_D2>, + <&topckgen CLK_TOP_SPI_SEL>, + <&infracfg CLK_INFRA_SPI1_CK>, + <&infracfg CLK_INFRA_SPI1_HCK_CK>; + clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + pio: pinctrl@11d00000 { compatible = "mediatek,mt7981-pinctrl"; reg = <0 0x11d00000 0 0x1000>, diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi index fa4ab4d2899f..783c333107bc 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi @@ -91,16 +91,11 @@ &dsi0 { status = "okay"; - /delete-property/#size-cells; - /delete-property/#address-cells; /delete-node/panel@0; - ports { - port { - dsi_out: endpoint { - remote-endpoint = <&anx7625_in>; - }; - }; - }; +}; + +&dsi_out { + remote-endpoint = <&anx7625_in>; }; &i2c0 { diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi index 6345e969efae..22924f61ec9e 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi @@ -24,7 +24,7 @@ backlight_lcd0: backlight_lcd0 { compatible = "pwm-backlight"; pwms = <&pwm0 0 500000>; - power-supply = <&bl_pp5000>; + power-supply = <®_vsys>; enable-gpios = <&pio 176 0>; brightness-levels = <0 1023>; num-interpolated-steps = <1023>; @@ -47,10 +47,9 @@ it6505_pp18_reg: regulator0 { compatible = "regulator-fixed"; regulator-name = "it6505_pp18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; gpio = <&pio 178 0>; enable-active-high; + vin-supply = <&pp1800_alw>; }; lcd_pp3300: regulator1 { @@ -62,27 +61,16 @@ regulator-boot-on; }; - bl_pp5000: regulator2 { - compatible = "regulator-fixed"; - regulator-name = "bl_pp5000"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - }; - mmc1_fixed_power: regulator3 { compatible = "regulator-fixed"; regulator-name = "mmc1_power"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + vin-supply = <&pp3300_alw>; }; mmc1_fixed_io: regulator4 { compatible = "regulator-fixed"; regulator-name = "mmc1_io"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + vin-supply = <&pp1800_alw>; }; pp1800_alw: regulator5 { @@ -92,6 +80,7 @@ regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + vin-supply = <®_vsys>; }; pp3300_alw: regulator6 { @@ -101,6 +90,7 @@ regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + vin-supply = <®_vsys>; }; /* system wide semi-regulated power rail from charger */ @@ -868,10 +858,6 @@ domain-supply = <&mt6358_vgpu_reg>; }; -&soc_data { - status = "okay"; -}; - &spi0 { pinctrl-names = "default"; pinctrl-0 = <&spi0_pins>; diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index fbf145639b8c..266441e999f2 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -872,8 +872,6 @@ mfg_async: power-domain@MT8183_POWER_DOMAIN_MFG_ASYNC { reg = <MT8183_POWER_DOMAIN_MFG_ASYNC>; - clocks = <&topckgen CLK_TOP_MUX_MFG>; - clock-names = "mfg"; #address-cells = <1>; #size-cells = <0>; #power-domain-cells = <1>; @@ -1838,6 +1836,17 @@ phy-names = "dphy"; }; + dpi0: dpi@14015000 { + compatible = "mediatek,mt8183-dpi"; + reg = <0 0x14015000 0 0x1000>; + interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_DPI_IF>, + <&mmsys CLK_MM_DPI_MM>, + <&apmixedsys CLK_APMIXED_TVDPLL>; + clock-names = "pixel", "engine", "pll"; + }; + mutex: mutex@14016000 { compatible = "mediatek,mt8183-disp-mutex"; reg = <0 0x14016000 0 0x1000>; diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi index afdab5724eaa..682c6ad2574d 100644 --- a/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi @@ -169,7 +169,7 @@ adsp_mem: memory@60000000 { compatible = "shared-dma-pool"; - reg = <0 0x60000000 0 0xA00000>; + reg = <0 0x60000000 0 0x1000000>; no-map; }; @@ -353,7 +353,8 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&dpi_pins_default>; pinctrl-1 = <&dpi_pins_sleep>; - status = "okay"; + /* TODO Re-enable after DP to Type-C port muxing can be described */ + status = "disabled"; }; &dpi_out { diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi b/arch/arm64/boot/dts/mediatek/mt8186.dtsi index 4763ed5dc86c..148c332018b0 100644 --- a/arch/arm64/boot/dts/mediatek/mt8186.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8186.dtsi @@ -13,6 +13,8 @@ #include <dt-bindings/power/mt8186-power.h> #include <dt-bindings/phy/phy.h> #include <dt-bindings/reset/mt8186-resets.h> +#include <dt-bindings/thermal/thermal.h> +#include <dt-bindings/thermal/mediatek,lvts-thermal.h> / { compatible = "mediatek,mt8186"; @@ -731,7 +733,7 @@ opp-900000000-3 { opp-hz = /bits/ 64 <900000000>; opp-microvolt = <850000>; - opp-supported-hw = <0x8>; + opp-supported-hw = <0xcf>; }; opp-900000000-4 { @@ -743,13 +745,13 @@ opp-900000000-5 { opp-hz = /bits/ 64 <900000000>; opp-microvolt = <825000>; - opp-supported-hw = <0x30>; + opp-supported-hw = <0x20>; }; opp-950000000-3 { opp-hz = /bits/ 64 <950000000>; opp-microvolt = <900000>; - opp-supported-hw = <0x8>; + opp-supported-hw = <0xcf>; }; opp-950000000-4 { @@ -761,13 +763,13 @@ opp-950000000-5 { opp-hz = /bits/ 64 <950000000>; opp-microvolt = <850000>; - opp-supported-hw = <0x30>; + opp-supported-hw = <0x20>; }; opp-1000000000-3 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <950000>; - opp-supported-hw = <0x8>; + opp-supported-hw = <0xcf>; }; opp-1000000000-4 { @@ -779,7 +781,7 @@ opp-1000000000-5 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <875000>; - opp-supported-hw = <0x30>; + opp-supported-hw = <0x20>; }; }; @@ -1361,6 +1363,29 @@ status = "disabled"; }; + lvts: thermal-sensor@1100b000 { + compatible = "mediatek,mt8186-lvts"; + reg = <0 0x1100b000 0 0x1000>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&infracfg_ao CLK_INFRA_AO_THERM>; + resets = <&infracfg_ao MT8186_INFRA_THERMAL_CTRL_RST>; + nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>; + nvmem-cell-names = "lvts-calib-data-1", "lvts-calib-data-2"; + #thermal-sensor-cells = <1>; + }; + + svs: svs@1100bc00 { + compatible = "mediatek,mt8186-svs"; + reg = <0 0x1100bc00 0 0x400>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&infracfg_ao CLK_INFRA_AO_THERM>; + clock-names = "main"; + nvmem-cells = <&svs_calibration>, <&lvts_efuse_data1>; + nvmem-cell-names = "svs-calibration-data", "t-calibration-data"; + resets = <&infracfg_ao MT8186_INFRA_PTP_CTRL_RST>; + reset-names = "svs_rst"; + }; + pwm0: pwm@1100e000 { compatible = "mediatek,mt8186-disp-pwm", "mediatek,mt8183-disp-pwm"; reg = <0 0x1100e000 0 0x1000>; @@ -1676,6 +1701,18 @@ #address-cells = <1>; #size-cells = <1>; + lvts_efuse_data1: lvts1-calib@1cc { + reg = <0x1cc 0x14>; + }; + + lvts_efuse_data2: lvts2-calib@2f8 { + reg = <0x2f8 0x14>; + }; + + svs_calibration: calib@550 { + reg = <0x550 0x50>; + }; + gpu_speedbin: gpu-speedbin@59c { reg = <0x59c 0x4>; bits = <0 3>; @@ -1824,6 +1861,7 @@ assigned-clocks = <&topckgen CLK_TOP_DPI>; assigned-clock-parents = <&topckgen CLK_TOP_TVDPLL_D2>; interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_LOW 0>; + power-domains = <&spm MT8186_POWER_DOMAIN_DIS>; status = "disabled"; port { @@ -2178,4 +2216,299 @@ power-domains = <&spm MT8186_POWER_DOMAIN_IPE>; }; }; + + thermal_zones: thermal-zones { + cpu-little0-thermal { + polling-delay = <1000>; + polling-delay-passive = <150>; + thermal-sensors = <&lvts MT8186_LITTLE_CPU0>; + + trips { + cpu_little0_alert0: trip-alert0 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_little0_alert1: trip-alert1 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu_little0_crit: trip-crit { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_little0_alert0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu-little1-thermal { + polling-delay = <1000>; + polling-delay-passive = <150>; + thermal-sensors = <&lvts MT8186_LITTLE_CPU1>; + + trips { + cpu_little1_alert0: trip-alert0 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_little1_alert1: trip-alert1 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu_little1_crit: trip-crit { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_little1_alert0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu-little2-thermal { + polling-delay = <1000>; + polling-delay-passive = <150>; + thermal-sensors = <&lvts MT8186_LITTLE_CPU2>; + + trips { + cpu_little2_alert0: trip-alert0 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_little2_alert1: trip-alert1 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu_little2_crit: trip-crit { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_little2_alert0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cam-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts MT8186_CAM>; + + trips { + cam_alert0: trip-alert0 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cam_alert1: trip-alert1 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + + cam_crit: trip-crit { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nna-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts MT8186_NNA>; + + trips { + nna_alert0: trip-alert0 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + nna_alert1: trip-alert1 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + + nna_crit: trip-crit { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + adsp-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts MT8186_ADSP>; + + trips { + adsp_alert0: trip-alert0 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + adsp_alert1: trip-alert1 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + + adsp_crit: trip-crit { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpu-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts MT8186_GPU>; + + trips { + gpu_alert0: trip-alert0 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu_alert1: trip-alert1 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + + gpu_crit: trip-crit { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&gpu_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu-big0-thermal { + polling-delay = <1000>; + polling-delay-passive = <100>; + thermal-sensors = <&lvts MT8186_BIG_CPU0>; + + trips { + cpu_big0_alert0: trip-alert0 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_big0_alert1: trip-alert1 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu_big0_crit: trip-crit { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_big0_alert0>; + cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu-big1-thermal { + polling-delay = <1000>; + polling-delay-passive = <100>; + thermal-sensors = <&lvts MT8186_BIG_CPU1>; + + trips { + cpu_big1_alert0: trip-alert0 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_big1_alert1: trip-alert1 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu_big1_crit: trip-crit { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_big1_alert0>; + cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi index 29d012d28edb..cd27966d2e3c 100644 --- a/arch/arm64/boot/dts/mediatek/mt8188.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi @@ -12,6 +12,9 @@ #include <dt-bindings/phy/phy.h> #include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h> #include <dt-bindings/power/mediatek,mt8188-power.h> +#include <dt-bindings/reset/mt8188-resets.h> +#include <dt-bindings/thermal/thermal.h> +#include <dt-bindings/thermal/mediatek,lvts-thermal.h> / { compatible = "mediatek,mt8188"; @@ -417,6 +420,450 @@ method = "smc"; }; + thermal_zones: thermal-zones { + cpu-little0-thermal { + polling-delay = <1000>; + polling-delay-passive = <150>; + thermal-sensors = <&lvts_mcu MT8188_MCU_LITTLE_CPU0>; + + trips { + cpu_little0_alert0: trip-alert0 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_little0_alert1: trip-alert1 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu_little0_crit: trip-crit { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_little0_alert0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu-little1-thermal { + polling-delay = <1000>; + polling-delay-passive = <150>; + thermal-sensors = <&lvts_mcu MT8188_MCU_LITTLE_CPU1>; + + trips { + cpu_little1_alert0: trip-alert0 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_little1_alert1: trip-alert1 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu_little1_crit: trip-crit { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_little1_alert0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu-little2-thermal { + polling-delay = <1000>; + polling-delay-passive = <150>; + thermal-sensors = <&lvts_mcu MT8188_MCU_LITTLE_CPU2>; + + trips { + cpu_little2_alert0: trip-alert0 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_little2_alert1: trip-alert1 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu_little2_crit: trip-crit { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_little2_alert0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu-little3-thermal { + polling-delay = <1000>; + polling-delay-passive = <150>; + thermal-sensors = <&lvts_mcu MT8188_MCU_LITTLE_CPU3>; + + trips { + cpu_little3_alert0: trip-alert0 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_little3_alert1: trip-alert1 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu_little3_crit: trip-crit { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_little3_alert0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu-big0-thermal { + polling-delay = <1000>; + polling-delay-passive = <100>; + thermal-sensors = <&lvts_mcu MT8188_MCU_BIG_CPU0>; + + trips { + cpu_big0_alert0: trip-alert0 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_big0_alert1: trip-alert1 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu_big0_crit: trip-crit { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_big0_alert0>; + cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu-big1-thermal { + polling-delay = <1000>; + polling-delay-passive = <100>; + thermal-sensors = <&lvts_mcu MT8188_MCU_BIG_CPU1>; + + trips { + cpu_big1_alert0: trip-alert0 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_big1_alert1: trip-alert1 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu_big1_crit: trip-crit { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_big1_alert0>; + cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + apu-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_ap MT8188_AP_APU>; + + trips { + apu_alert0: trip-alert0 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + apu_alert1: trip-alert1 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + + apu_crit: trip-crit { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpu-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_ap MT8188_AP_GPU0>; + + trips { + gpu_alert0: trip-alert0 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu_alert1: trip-alert1 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + + gpu_crit: trip-crit { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&gpu_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + gpu1-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_ap MT8188_AP_GPU1>; + + trips { + gpu1_alert0: trip-alert0 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu1_alert1: trip-alert1 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + + gpu1_crit: trip-crit { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&gpu1_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + adsp-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_ap MT8188_AP_ADSP>; + + trips { + soc_alert0: trip-alert0 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + soc_alert1: trip-alert1 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + + soc_crit: trip-crit { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + vdo-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_ap MT8188_AP_VDO>; + + trips { + soc1_alert0: trip-alert0 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + soc1_alert1: trip-alert1 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + + soc1_crit: trip-crit { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + infra-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_ap MT8188_AP_INFRA>; + + trips { + soc2_alert0: trip-alert0 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + soc2_alert1: trip-alert1 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + + soc2_crit: trip-crit { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cam1-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_ap MT8188_AP_CAM1>; + + trips { + cam1_alert0: trip-alert0 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cam1_alert1: trip-alert1 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + + cam1_crit: trip-crit { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cam2-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_ap MT8188_AP_CAM2>; + + trips { + cam2_alert0: trip-alert0 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cam2_alert1: trip-alert1 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + + cam2_crit: trip-crit { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; + timer: timer { compatible = "arm,armv8-timer"; interrupt-parent = <&gic>; @@ -464,6 +911,7 @@ compatible = "mediatek,mt8188-infracfg-ao", "syscon"; reg = <0 0x10001000 0 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; }; pericfg: syscon@10003000 { @@ -937,6 +1385,17 @@ status = "disabled"; }; + lvts_ap: thermal-sensor@1100b000 { + compatible = "mediatek,mt8188-lvts-ap"; + reg = <0 0x1100b000 0 0xc00>; + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&infracfg_ao CLK_INFRA_AO_THERM>; + resets = <&infracfg_ao MT8188_INFRA_RST1_THERMAL_CTRL_RST>; + nvmem-cells = <&lvts_efuse_data1>; + nvmem-cell-names = "lvts-calib-data-1"; + #thermal-sensor-cells = <1>; + }; + spi1: spi@11010000 { compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm"; #address-cells = <1>; @@ -1050,6 +1509,17 @@ status = "disabled"; }; + lvts_mcu: thermal-sensor@11278000 { + compatible = "mediatek,mt8188-lvts-mcu"; + reg = <0 0x11278000 0 0x1000>; + interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&infracfg_ao CLK_INFRA_AO_THERM>; + resets = <&infracfg_ao MT8188_INFRA_RST1_THERMAL_MCU_RST>; + nvmem-cells = <&lvts_efuse_data1>; + nvmem-cell-names = "lvts-calib-data-1"; + #thermal-sensor-cells = <1>; + }; + i2c0: i2c@11280000 { compatible = "mediatek,mt8188-i2c"; reg = <0 0x11280000 0 0x1000>, @@ -1273,6 +1743,17 @@ #clock-cells = <1>; }; + efuse: efuse@11f20000 { + compatible = "mediatek,mt8188-efuse", "mediatek,efuse"; + reg = <0 0x11f20000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + lvts_efuse_data1: lvts1-calib@1ac { + reg = <0x1ac 0x40>; + }; + }; + gpu: gpu@13000000 { compatible = "mediatek,mt8188-mali", "arm,mali-valhall-jm"; reg = <0 0x13000000 0 0x4000>; @@ -1287,6 +1768,7 @@ <&spm MT8188_POWER_DOMAIN_MFG3>, <&spm MT8188_POWER_DOMAIN_MFG4>; power-domain-names = "core0", "core1", "core2"; + #cooling-cells = <2>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-dojo-r1.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-dojo-r1.dts index 88123842c818..49664de99b88 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195-cherry-dojo-r1.dts +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-dojo-r1.dts @@ -82,12 +82,17 @@ pins-low-power-hdmi-disable { pinmux = <PINMUX_GPIO31__FUNC_GPIO31>, <PINMUX_GPIO32__FUNC_GPIO32>, - <PINMUX_GPIO33__FUNC_GPIO33>, - <PINMUX_GPIO34__FUNC_GPIO34>, - <PINMUX_GPIO35__FUNC_GPIO35>; + <PINMUX_GPIO33__FUNC_GPIO33>; input-enable; bias-pull-down; }; + + pins-low-power-hdmi-rsel-disable { + pinmux = <PINMUX_GPIO34__FUNC_GPIO34>, + <PINMUX_GPIO35__FUNC_GPIO35>; + input-enable; + bias-pull-down = <75000>; + }; }; &sound { diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts index 2fe20e0dad83..2d6522c144b7 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts @@ -19,13 +19,18 @@ pins-low-power-hdmi-disable { pinmux = <PINMUX_GPIO31__FUNC_GPIO31>, <PINMUX_GPIO32__FUNC_GPIO32>, - <PINMUX_GPIO33__FUNC_GPIO33>, - <PINMUX_GPIO34__FUNC_GPIO34>, - <PINMUX_GPIO35__FUNC_GPIO35>; + <PINMUX_GPIO33__FUNC_GPIO33>; input-enable; bias-pull-down; }; + pins-low-power-hdmi-rsel-disable { + pinmux = <PINMUX_GPIO34__FUNC_GPIO34>, + <PINMUX_GPIO35__FUNC_GPIO35>; + input-enable; + bias-pull-down = <75000>; + }; + pins-low-power-pcie0-disable { pinmux = <PINMUX_GPIO19__FUNC_GPIO19>, <PINMUX_GPIO20__FUNC_GPIO20>, diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts index dd294ca98194..9049d362a5e0 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts @@ -20,13 +20,18 @@ pins-low-power-hdmi-disable { pinmux = <PINMUX_GPIO31__FUNC_GPIO31>, <PINMUX_GPIO32__FUNC_GPIO32>, - <PINMUX_GPIO33__FUNC_GPIO33>, - <PINMUX_GPIO34__FUNC_GPIO34>, - <PINMUX_GPIO35__FUNC_GPIO35>; + <PINMUX_GPIO33__FUNC_GPIO33>; input-enable; bias-pull-down; }; + pins-low-power-hdmi-rsel-disable { + pinmux = <PINMUX_GPIO34__FUNC_GPIO34>, + <PINMUX_GPIO35__FUNC_GPIO35>; + input-enable; + bias-pull-down = <75000>; + }; + pins-low-power-pcie0-disable { pinmux = <PINMUX_GPIO19__FUNC_GPIO19>, <PINMUX_GPIO20__FUNC_GPIO20>, diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi index fe5400e17b0f..75d56b2d5a3d 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi @@ -1228,10 +1228,6 @@ spi-max-frequency = <3000000>; wakeup-source; - keyboard-backlight { - compatible = "google,cros-kbd-led-backlight"; - }; - i2c_tunnel: i2c-tunnel { compatible = "google,cros-ec-i2c-tunnel"; google,remote-bus = <0>; @@ -1401,9 +1397,11 @@ &xhci1 { status = "okay"; + phys = <&u2port1 PHY_TYPE_USB2>; rx-fifo-depth = <3072>; vusb33-supply = <&mt6359_vusb_ldo_reg>; vbus-supply = <&usb_vbus>; + mediatek,u3p-dis-msk = <1>; }; &xhci2 { diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi index 2ee45752583c..e89ba384c4aa 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi @@ -1444,7 +1444,7 @@ <0 0x11293e00 0 0x0100>; reg-names = "mac", "ippc"; interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH 0>; - phys = <&u2port1 PHY_TYPE_USB2>; + phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>; assigned-clocks = <&topckgen CLK_TOP_USB_TOP_1P>, <&topckgen CLK_TOP_SSUSB_XHCI_1P>; assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>, @@ -2037,6 +2037,7 @@ mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x1000 0x1000>; mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_RDMA_SOF>, <CMDQ_EVENT_VPP0_MDP_RDMA_FRAME_DONE>; + mediatek,scp = <&scp>; power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>; iommus = <&iommu_vpp M4U_PORT_L4_MDP_RDMA>; clocks = <&vppsys0 CLK_VPP0_MDP_RDMA>; @@ -3251,10 +3252,10 @@ compatible = "mediatek,mt8195-dp-intf"; reg = <0 0x1c015000 0 0x1000>; interrupts = <GIC_SPI 657 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&vdosys0 CLK_VDO0_DP_INTF0>, - <&vdosys0 CLK_VDO0_DP_INTF0_DP_INTF>, + clocks = <&vdosys0 CLK_VDO0_DP_INTF0_DP_INTF>, + <&vdosys0 CLK_VDO0_DP_INTF0>, <&apmixedsys CLK_APMIXED_TVDPLL1>; - clock-names = "engine", "pixel", "pll"; + clock-names = "pixel", "engine", "pll"; status = "disabled"; }; @@ -3521,10 +3522,10 @@ reg = <0 0x1c113000 0 0x1000>; interrupts = <GIC_SPI 513 IRQ_TYPE_LEVEL_HIGH 0>; power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; - clocks = <&vdosys1 CLK_VDO1_DP_INTF0_MM>, - <&vdosys1 CLK_VDO1_DPINTF>, + clocks = <&vdosys1 CLK_VDO1_DPINTF>, + <&vdosys1 CLK_VDO1_DP_INTF0_MM>, <&apmixedsys CLK_APMIXED_TVDPLL2>; - clock-names = "engine", "pixel", "pll"; + clock-names = "pixel", "engine", "pll"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts index 4211a992dd9d..7d90112a7e27 100644 --- a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts +++ b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts @@ -4,6 +4,7 @@ * Authors: * Fabien Parent <fparent@baylibre.com> * Bernhard Rosenkränzer <bero@baylibre.com> + * Alexandre Mergnat <amergnat@baylibre.com> */ /dts-v1/; @@ -86,6 +87,28 @@ reg = <0 0x43200000 0 0x00c00000>; }; }; + + sound: sound { + compatible = "mediatek,mt8365-mt6357"; + pinctrl-names = "default", + "dmic", + "miso_off", + "miso_on", + "mosi_off", + "mosi_on"; + pinctrl-0 = <&aud_default_pins>; + pinctrl-1 = <&aud_dmic_pins>; + pinctrl-2 = <&aud_miso_off_pins>; + pinctrl-3 = <&aud_miso_on_pins>; + pinctrl-4 = <&aud_mosi_off_pins>; + pinctrl-5 = <&aud_mosi_on_pins>; + mediatek,platform = <&afe>; + }; +}; + +&afe { + mediatek,dmic-mode = <1>; + status = "okay"; }; &cpu0 { @@ -178,9 +201,72 @@ interrupts-extended = <&pio 145 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; + mediatek,micbias0-microvolt = <1900000>; + mediatek,micbias1-microvolt = <1700000>; }; &pio { + aud_default_pins: audiodefault-pins { + clk-dat-pins { + pinmux = <MT8365_PIN_72_CMDAT4__FUNC_I2S3_BCK>, + <MT8365_PIN_73_CMDAT5__FUNC_I2S3_LRCK>, + <MT8365_PIN_74_CMDAT6__FUNC_I2S3_MCK>, + <MT8365_PIN_75_CMDAT7__FUNC_I2S3_DO>; + }; + }; + + aud_dmic_pins: audiodmic-pins { + clk-dat-pins { + pinmux = <MT8365_PIN_117_DMIC0_CLK__FUNC_DMIC0_CLK>, + <MT8365_PIN_118_DMIC0_DAT0__FUNC_DMIC0_DAT0>, + <MT8365_PIN_119_DMIC0_DAT1__FUNC_DMIC0_DAT1>; + }; + }; + + aud_miso_off_pins: misooff-pins { + clk-dat-pins { + pinmux = <MT8365_PIN_53_AUD_CLK_MISO__FUNC_GPIO53>, + <MT8365_PIN_54_AUD_SYNC_MISO__FUNC_GPIO54>, + <MT8365_PIN_55_AUD_DAT_MISO0__FUNC_GPIO55>, + <MT8365_PIN_56_AUD_DAT_MISO1__FUNC_GPIO56>; + input-enable; + bias-pull-down; + drive-strength = <2>; + }; + }; + + aud_miso_on_pins: misoon-pins { + clk-dat-pins { + pinmux = <MT8365_PIN_53_AUD_CLK_MISO__FUNC_AUD_CLK_MISO>, + <MT8365_PIN_54_AUD_SYNC_MISO__FUNC_AUD_SYNC_MISO>, + <MT8365_PIN_55_AUD_DAT_MISO0__FUNC_AUD_DAT_MISO0>, + <MT8365_PIN_56_AUD_DAT_MISO1__FUNC_AUD_DAT_MISO1>; + drive-strength = <6>; + }; + }; + + aud_mosi_off_pins: mosioff-pins { + clk-dat-pins { + pinmux = <MT8365_PIN_49_AUD_CLK_MOSI__FUNC_GPIO49>, + <MT8365_PIN_50_AUD_SYNC_MOSI__FUNC_GPIO50>, + <MT8365_PIN_51_AUD_DAT_MOSI0__FUNC_GPIO51>, + <MT8365_PIN_52_AUD_DAT_MOSI1__FUNC_GPIO52>; + input-enable; + bias-pull-down; + drive-strength = <2>; + }; + }; + + aud_mosi_on_pins: mosion-pins { + clk-dat-pins { + pinmux = <MT8365_PIN_49_AUD_CLK_MOSI__FUNC_AUD_CLK_MOSI>, + <MT8365_PIN_50_AUD_SYNC_MOSI__FUNC_AUD_SYNC_MOSI>, + <MT8365_PIN_51_AUD_DAT_MOSI0__FUNC_AUD_DAT_MOSI0>, + <MT8365_PIN_52_AUD_DAT_MOSI1__FUNC_AUD_DAT_MOSI1>; + drive-strength = <6>; + }; + }; + ethernet_pins: ethernet-pins { phy_reset_pins { pinmux = <MT8365_PIN_133_TDM_TX_DATA1__FUNC_GPIO133>; diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi index eb449bfa8803..9c91fe8ea0f9 100644 --- a/arch/arm64/boot/dts/mediatek/mt8365.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi @@ -2,9 +2,11 @@ /* * (C) 2018 MediaTek Inc. * Copyright (C) 2022 BayLibre SAS - * Fabien Parent <fparent@baylibre.com> - * Bernhard Rosenkränzer <bero@baylibre.com> + * Authors: Fabien Parent <fparent@baylibre.com> + * Bernhard Rosenkränzer <bero@baylibre.com> + * Alexandre Mergnat <amergnat@baylibre.com> */ + #include <dt-bindings/clock/mediatek,mt8365-clk.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -812,6 +814,43 @@ reg = <0 0x19020000 0 0x1000>; #clock-cells = <1>; }; + + afe: audio-controller@11220000 { + compatible = "mediatek,mt8365-afe-pcm"; + reg = <0 0x11220000 0 0x1000>; + #sound-dai-cells = <0>; + clocks = <&clk26m>, + <&topckgen CLK_TOP_AUDIO_SEL>, + <&topckgen CLK_TOP_AUD_I2S0_M>, + <&topckgen CLK_TOP_AUD_I2S1_M>, + <&topckgen CLK_TOP_AUD_I2S2_M>, + <&topckgen CLK_TOP_AUD_I2S3_M>, + <&topckgen CLK_TOP_AUD_ENGEN1_SEL>, + <&topckgen CLK_TOP_AUD_ENGEN2_SEL>, + <&topckgen CLK_TOP_AUD_1_SEL>, + <&topckgen CLK_TOP_AUD_2_SEL>, + <&topckgen CLK_TOP_APLL_I2S0_SEL>, + <&topckgen CLK_TOP_APLL_I2S1_SEL>, + <&topckgen CLK_TOP_APLL_I2S2_SEL>, + <&topckgen CLK_TOP_APLL_I2S3_SEL>; + clock-names = "top_clk26m_clk", + "top_audio_sel", + "audio_i2s0_m", + "audio_i2s1_m", + "audio_i2s2_m", + "audio_i2s3_m", + "engen1", + "engen2", + "aud1", + "aud2", + "i2s0_m_sel", + "i2s1_m_sel", + "i2s2_m_sel", + "i2s3_m_sel"; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT8365_POWER_DOMAIN_AUDIO>; + status = "disabled"; + }; }; timer { diff --git a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts index a06610fff8ad..1ef6262b65c9 100644 --- a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts +++ b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts @@ -904,8 +904,6 @@ }; &xhci1 { - phys = <&u2port1 PHY_TYPE_USB2>, - <&u3port1 PHY_TYPE_USB3>; vusb33-supply = <&mt6359_vusb_ldo_reg>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dts b/arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dts index e4b2af9489a8..e2e75b8ff918 100644 --- a/arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dts +++ b/arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dts @@ -1111,6 +1111,7 @@ /* USB2.0 M.2 Key-B */ &xhci1 { + phys = <&u2port1 PHY_TYPE_USB2>; vusb33-supply = <&mt6359_vusb_ldo_reg>; mediatek,u3p-dis-msk = <0x01>; status = "okay"; diff --git a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts index 4b5f6cf16f70..14ec970c4e49 100644 --- a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts +++ b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts @@ -894,10 +894,12 @@ }; &xhci1 { + phys = <&u2port1 PHY_TYPE_USB2>; /* MT7921's USB Bluetooth has issues with USB2 LPM */ usb2-lpm-disable; vusb33-supply = <&mt6359_vusb_ldo_reg>; vbus-supply = <&vsys>; + mediatek,u3p-dis-msk = <1>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts b/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts index b89e2be6abae..9482bec1aa57 100644 --- a/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts +++ b/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts @@ -14,6 +14,10 @@ aliases { serial0 = &uart0; + serial10 = &uart10; + serial12 = &uart12; + serial13 = &uart13; + serial14 = &uart14; }; chosen { @@ -33,10 +37,6 @@ }; }; -&uart0 { - status = "okay"; -}; - &clk { assigned-clocks = <&clk CAPLL>, <&clk DDRPLL>, @@ -54,3 +54,75 @@ "integer", "integer"; }; + +&pinctrl { + uart-grp { + pinctrl_uart0: uart0-pins { + nuvoton,pins = <4 14 1>, + <4 15 1>; + bias-disable; + power-source = <1>; + }; + + pinctrl_uart10: uart10-pins { + nuvoton,pins = <7 4 2>, + <7 5 2>, + <7 6 2>, + <7 7 2>; + bias-disable; + power-source = <1>; + }; + + pinctrl_uart12: uart12-pins { + nuvoton,pins = <2 13 2>, + <2 14 2>, + <2 15 2>; + bias-disable; + power-source = <1>; + }; + + pinctrl_uart13: uart13-pins { + nuvoton,pins = <7 12 3>, + <7 13 3>; + bias-disable; + power-source = <1>; + }; + + pinctrl_uart14: uart14-pins { + nuvoton,pins = <7 14 2>, + <7 15 2>; + bias-disable; + power-source = <1>; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "okay"; +}; + +&uart10 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart10>; + status = "okay"; +}; + +&uart12 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart12>; + status = "okay"; +}; + +&uart13 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart13>; + status = "okay"; +}; + +&uart14 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart14>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts b/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts index a1ebddecb7f8..f6f20a17e501 100644 --- a/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts +++ b/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts @@ -14,6 +14,10 @@ aliases { serial0 = &uart0; + serial11 = &uart11; + serial12 = &uart12; + serial14 = &uart14; + serial16 = &uart16; }; chosen { @@ -33,10 +37,6 @@ }; }; -&uart0 { - status = "okay"; -}; - &clk { assigned-clocks = <&clk CAPLL>, <&clk DDRPLL>, @@ -54,3 +54,78 @@ "integer", "integer"; }; + +&pinctrl { + uart-grp { + pinctrl_uart0: uart0-pins { + nuvoton,pins = <4 14 1>, + <4 15 1>; + bias-disable; + power-source = <1>; + }; + + pinctrl_uart11: uart11-pins { + nuvoton,pins = <11 0 2>, + <11 1 2>, + <11 2 2>, + <11 3 2>; + bias-disable; + power-source = <1>; + }; + + pinctrl_uart12: uart12-pins { + nuvoton,pins = <8 1 2>, + <8 2 2>, + <8 3 2>; + bias-disable; + power-source = <1>; + }; + + pinctrl_uart14: uart14-pins { + nuvoton,pins = <8 5 2>, + <8 6 2>, + <8 7 2>; + bias-disable; + power-source = <1>; + }; + + pinctrl_uart16: uart16-pins { + nuvoton,pins = <10 0 2>, + <10 1 2>, + <10 2 2>, + <10 3 2>; + bias-disable; + power-source = <1>; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "okay"; +}; + +&uart11 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart11>; + status = "okay"; +}; + +&uart12 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart12>; + status = "okay"; +}; + +&uart14 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart14>; + status = "okay"; +}; + +&uart16 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart16>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi b/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi index 781cdae566a0..e51b98f5bdce 100644 --- a/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi +++ b/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi @@ -83,7 +83,7 @@ ranges; sys: system-management@40460000 { - compatible = "nuvoton,ma35d1-reset"; + compatible = "nuvoton,ma35d1-reset", "syscon"; reg = <0x0 0x40460000 0x0 0x200>; #reset-cells = <1>; }; @@ -95,6 +95,155 @@ clocks = <&clk_hxt>; }; + pinctrl: pinctrl@40040000 { + compatible = "nuvoton,ma35d1-pinctrl"; + reg = <0x0 0x40040000 0x0 0xc00>; + #address-cells = <1>; + #size-cells = <1>; + nuvoton,sys = <&sys>; + ranges = <0x0 0x0 0x40040000 0x400>; + + gpioa: gpio@0 { + reg = <0x0 0x40>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk GPA_GATE>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpiob: gpio@40 { + reg = <0x40 0x40>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk GPB_GATE>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpioc: gpio@80 { + reg = <0x80 0x40>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk GPC_GATE>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpiod: gpio@c0 { + reg = <0xc0 0x40>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk GPD_GATE>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpioe: gpio@100 { + reg = <0x100 0x40>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk GPE_GATE>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpiof: gpio@140 { + reg = <0x140 0x40>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk GPF_GATE>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpiog: gpio@180 { + reg = <0x180 0x40>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk GPG_GATE>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpioh: gpio@1c0 { + reg = <0x1c0 0x40>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk GPH_GATE>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpioi: gpio@200 { + reg = <0x200 0x40>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk GPI_GATE>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpioj: gpio@240 { + reg = <0x240 0x40>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk GPJ_GATE>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpiok: gpio@280 { + reg = <0x280 0x40>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk GPK_GATE>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpiol: gpio@2c0 { + reg = <0x2c0 0x40>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk GPL_GATE>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpiom: gpio@300 { + reg = <0x300 0x40>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk GPM_GATE>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpion: gpio@340 { + reg = <0x340 0x40>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk GPN_GATE>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + uart0: serial@40700000 { compatible = "nuvoton,ma35d1-uart"; reg = <0x0 0x40700000 0x0 0x100>; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi index 0ae5a44f7d07..c00db75e3910 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi @@ -33,6 +33,51 @@ status = "okay"; }; + serial@70006300 { + /delete-property/ reg-shift; + status = "okay"; + compatible = "nvidia,tegra30-hsuart"; + reset-names = "serial"; + + bluetooth { + compatible = "brcm,bcm43540-bt"; + device-wakeup-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(H, 5) IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "host-wakeup"; + }; + }; + + i2c@7000c400 { + status = "okay"; + + power-sensor@40 { + compatible = "ti,ina3221"; + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + + input@0 { + reg = <0x0>; + label = "VDD_IN"; + shunt-resistor-micro-ohms = <20000>; + }; + + input@1 { + reg = <0x1>; + label = "VDD_GPU"; + shunt-resistor-micro-ohms = <10000>; + }; + + input@2 { + reg = <0x2>; + label = "VDD_CPU"; + shunt-resistor-micro-ohms = <10000>; + }; + }; + }; + i2c@7000c500 { status = "okay"; @@ -295,6 +340,25 @@ nvidia,sys-clock-req-active-high; }; + mmc@700b0200 { + status = "okay"; + bus-width = <4>; + non-removable; + power-gpios = <&gpio TEGRA_GPIO(H, 0) GPIO_ACTIVE_HIGH>; + vqmmc-supply = <&vdd_1v8>; + vmmc-supply = <&vdd_3v3_sys>; + #address-cells = <1>; + #size-cells = <0>; + + wifi@1 { + compatible = "brcm,bcm4354-fmac"; + reg = <1>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(H, 2) IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + }; + }; + /* eMMC */ mmc@700b0600 { status = "okay"; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi index b4a1108c2dd7..63b94a04308e 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi @@ -1319,6 +1319,56 @@ status = "okay"; clock-frequency = <100000>; + power-sensor@42 { + compatible = "ti,ina3221"; + reg = <0x42>; + #address-cells = <1>; + #size-cells = <0>; + + input@0 { + reg = <0x0>; + label = "VDD_MUX"; + shunt-resistor-micro-ohms = <20000>; + }; + + input@1 { + reg = <0x1>; + label = "VDD_5V_IO_SYS"; + shunt-resistor-micro-ohms = <5000>; + }; + + input@2 { + reg = <0x2>; + label = "VDD_3V3_SYS"; + shunt-resistor-micro-ohms = <10000>; + }; + }; + + power-sensor@43 { + compatible = "ti,ina3221"; + reg = <0x43>; + #address-cells = <1>; + #size-cells = <0>; + + input@0 { + reg = <0x0>; + label = "VDD_3V3_IO"; + shunt-resistor-micro-ohms = <10000>; + }; + + input@1 { + reg = <0x1>; + label = "VDD_1V8_IO"; + shunt-resistor-micro-ohms = <10000>; + }; + + input@2 { + reg = <0x2>; + label = "VDD_M2_IN"; + shunt-resistor-micro-ohms = <10000>; + }; + }; + exp1: gpio@74 { compatible = "ti,tca9539"; reg = <0x74>; @@ -1517,6 +1567,7 @@ bus-width = <4>; cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>; vqmmc-supply = <&vddio_sdmmc>; vmmc-supply = <&vdd_3v3_sd>; @@ -1603,7 +1654,7 @@ regulator-name = "VDD_3V3_SD"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>; + gpio = <&gpio TEGRA_GPIO(Z, 3) GPIO_ACTIVE_HIGH>; enable-active-high; vin-supply = <&vdd_3v3_sys>; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi index cb792041fc62..d977f4901c09 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi @@ -1,146 +1,11 @@ // SPDX-License-Identifier: GPL-2.0 -#include "tegra234.dtsi" #include "tegra234-p3701.dtsi" / { model = "NVIDIA Jetson AGX Orin"; compatible = "nvidia,p3701-0000", "nvidia,tegra234"; - bus@0 { - i2c@3160000 { - status = "okay"; - - eeprom@50 { - compatible = "atmel,24c02"; - reg = <0x50>; - - label = "module"; - vcc-supply = <&vdd_1v8_hs>; - address-width = <8>; - pagesize = <8>; - size = <256>; - read-only; - }; - }; - - spi@3270000 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <102000000>; - spi-tx-bus-width = <4>; - spi-rx-bus-width = <4>; - }; - }; - - mmc@3400000 { - status = "okay"; - bus-width = <4>; - cd-gpios = <&gpio TEGRA234_MAIN_GPIO(G, 7) GPIO_ACTIVE_LOW>; - disable-wp; - }; - - mmc@3460000 { - status = "okay"; - bus-width = <8>; - non-removable; - }; - - padctl@3520000 { - vclamp-usb-supply = <&vdd_1v8_ao>; - avdd-usb-supply = <&vdd_3v3_ao>; - - ports { - usb2-0 { - vbus-supply = <&vdd_5v0_sys>; - }; - - usb2-1 { - vbus-supply = <&vdd_5v0_sys>; - }; - - usb2-2 { - vbus-supply = <&vdd_5v0_sys>; - }; - - usb2-3 { - vbus-supply = <&vdd_5v0_sys>; - }; - }; - }; - - rtc@c2a0000 { - status = "okay"; - }; - - pmc@c360000 { - nvidia,invert-interrupt; - }; - }; - - vdd_5v0_sys: regulator-vdd-5v0-sys { - compatible = "regulator-fixed"; - regulator-name = "VIN_SYS_5V0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - }; - - vdd_1v8_ls: regulator-vdd-1v8-ls { - compatible = "regulator-fixed"; - regulator-name = "VDD_1V8_LS"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - vdd_1v8_hs: regulator-vdd-1v8-hs { - compatible = "regulator-fixed"; - regulator-name = "VDD_1V8_HS"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - vdd_1v8_ao: regulator-vdd-1v8-ao { - compatible = "regulator-fixed"; - regulator-name = "VDD_1V8_AO"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - vdd_3v3_ao: regulator-vdd-3v3-ao { - compatible = "regulator-fixed"; - regulator-name = "VDD_3V3_AO"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_3v3_pcie: regulator-vdd-3v3-pcie { - compatible = "regulator-fixed"; - regulator-name = "VDD_3V3_PCIE"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio TEGRA234_MAIN_GPIO(H, 4) GPIO_ACTIVE_HIGH>; - regulator-boot-on; - enable-active-high; - }; - - vdd_12v_pcie: regulator-vdd-12v-pcie { - compatible = "regulator-fixed"; - regulator-name = "VDD_12V_PCIE"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - gpio = <&gpio TEGRA234_MAIN_GPIO(A, 1) GPIO_ACTIVE_LOW>; - regulator-boot-on; - }; - thermal-zones { tj-thermal { polling-delay = <1000>; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0008.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0008.dtsi index 553fa4ba1cd4..0809634e5732 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0008.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0008.dtsi @@ -1,145 +1,29 @@ // SPDX-License-Identifier: GPL-2.0 -#include "tegra234.dtsi" #include "tegra234-p3701.dtsi" / { compatible = "nvidia,p3701-0008", "nvidia,tegra234"; - bus@0 { - i2c@3160000 { + thermal-zones { + tj-thermal { + polling-delay = <1000>; + polling-delay-passive = <1000>; status = "okay"; - eeprom@50 { - compatible = "atmel,24c02"; - reg = <0x50>; - label = "module"; - vcc-supply = <&vdd_1v8_hs>; - address-width = <8>; - pagesize = <8>; - size = <256>; - read-only; - }; - }; - - spi@3270000 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <102000000>; - spi-tx-bus-width = <4>; - spi-rx-bus-width = <4>; - }; - }; - - mmc@3460000 { - status = "okay"; - bus-width = <8>; - non-removable; - }; - - i2c@c240000 { - status = "okay"; - }; - - i2c@c250000 { - power-sensor@41 { - compatible = "ti,ina3221"; - reg = <0x41>; - #address-cells = <1>; - #size-cells = <0>; - - input@0 { - reg = <0x0>; - label = "CVB_ATX_12V"; - shunt-resistor-micro-ohms = <2000>; - }; - - input@1 { - reg = <0x1>; - label = "CVB_ATX_3V3"; - shunt-resistor-micro-ohms = <2000>; + trips { + tj_trip_active0: active-0 { + temperature = <85000>; + hysteresis = <4000>; + type = "active"; }; - input@2 { - reg = <0x2>; - label = "CVB_ATX_5V"; - shunt-resistor-micro-ohms = <2000>; + tj_trip_active1: active-1 { + temperature = <105000>; + hysteresis = <4000>; + type = "active"; }; }; - - power-sensor@44 { - compatible = "ti,ina219"; - reg = <0x44>; - shunt-resistor = <2000>; - }; - }; - - rtc@c2a0000 { - status = "okay"; }; - - pmc@c360000 { - nvidia,invert-interrupt; - }; - }; - - bpmp { - i2c { - status = "okay"; - - thermal-sensor@4c { - status = "okay"; - reg = <0x4c>; - vcc-supply = <&vdd_1v8_ao>; - }; - }; - - thermal { - status = "okay"; - }; - }; - - vdd_1v8_ao: regulator-vdd-1v8-ao { - compatible = "regulator-fixed"; - regulator-name = "VDD_1V8_AO"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - vdd_1v8_hs: regulator-vdd-1v8-hs { - compatible = "regulator-fixed"; - regulator-name = "VDD_1V8_HS"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - vdd_1v8_ls: regulator-vdd-1v8-ls { - compatible = "regulator-fixed"; - regulator-name = "VDD_1V8_LS"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - vdd_3v3_ao: regulator-vdd-3v3-ao { - compatible = "regulator-fixed"; - regulator-name = "vdd-AO-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_5v0_sys: regulator-vdd-5v0-sys { - compatible = "regulator-fixed"; - regulator-name = "VIN_SYS_5V0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3701.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3701.dtsi index 320c8e9b06b4..9086a0d010e5 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3701.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3701.dtsi @@ -1,5 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 +#include "tegra234.dtsi" + / { compatible = "nvidia,p3701", "nvidia,tegra234"; @@ -45,6 +47,63 @@ }; }; + i2c@3160000 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + + label = "module"; + vcc-supply = <&vdd_1v8_hs>; + address-width = <8>; + pagesize = <8>; + size = <256>; + read-only; + }; + }; + + spi@3270000 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <102000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; + }; + + mmc@3460000 { + status = "okay"; + bus-width = <8>; + non-removable; + }; + + padctl@3520000 { + vclamp-usb-supply = <&vdd_1v8_ao>; + avdd-usb-supply = <&vdd_3v3_ao>; + + ports { + usb2-0 { + vbus-supply = <&vdd_5v0_sys>; + }; + + usb2-1 { + vbus-supply = <&vdd_5v0_sys>; + }; + + usb2-2 { + vbus-supply = <&vdd_5v0_sys>; + }; + + usb2-3 { + vbus-supply = <&vdd_5v0_sys>; + }; + }; + }; + i2c@c240000 { status = "okay"; @@ -97,5 +156,71 @@ }; }; }; + + rtc@c2a0000 { + status = "okay"; + }; + + pmc@c360000 { + nvidia,invert-interrupt; + }; + }; + + bpmp { + i2c { + status = "okay"; + + thermal-sensor@4c { + compatible = "ti,tmp451"; + status = "okay"; + reg = <0x4c>; + vcc-supply = <&vdd_1v8_ao>; + }; + }; + + thermal { + status = "okay"; + }; + }; + + vdd_1v8_ao: regulator-vdd-1v8-ao { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8_AO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vdd_1v8_hs: regulator-vdd-1v8-hs { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8_HS"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vdd_1v8_ls: regulator-vdd-1v8-ls { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8_LS"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vdd_3v3_ao: regulator-vdd-3v3-ao { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_AO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_5v0_sys: regulator-vdd-5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "VIN_SYS_5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts index 69db584253da..90f12277aede 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts @@ -3,9 +3,9 @@ #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/sound/rt5640.h> #include "tegra234-p3701-0000.dtsi" -#include "tegra234-p3737-0000.dtsi" / { model = "NVIDIA Jetson AGX Orin Developer Kit"; @@ -22,23 +22,97 @@ }; bus@0 { + aconnect@2900000 { + ahub@2900800 { + i2s@2901000 { + ports { + port@1 { + endpoint { + dai-format = "i2s"; + remote-endpoint = <&rt5640_ep>; + }; + }; + }; + }; + }; + }; + serial@3100000 { compatible = "nvidia,tegra194-hsuart"; reset-names = "serial"; status = "okay"; }; + i2c@3160000 { + status = "okay"; + + eeprom@56 { + compatible = "atmel,24c02"; + reg = <0x56>; + + label = "system"; + vcc-supply = <&vdd_1v8_sys>; + address-width = <8>; + pagesize = <8>; + size = <256>; + read-only; + }; + }; + serial@31d0000 { current-speed = <115200>; status = "okay"; }; + i2c@31e0000 { + status = "okay"; + + audio-codec@1c { + compatible = "realtek,rt5640"; + reg = <0x1c>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA234_MAIN_GPIO(AC, 5) GPIO_ACTIVE_HIGH>; + clocks = <&bpmp TEGRA234_CLK_AUD_MCLK>; + clock-names = "mclk"; + realtek,dmic1-data-pin = <RT5640_DMIC1_DATA_PIN_NONE>; + realtek,dmic2-data-pin = <RT5640_DMIC2_DATA_PIN_NONE>; + realtek,jack-detect-source = <RT5640_JD_SRC_HDA_HEADER>; + sound-name-prefix = "CVB-RT"; + + port { + rt5640_ep: endpoint { + remote-endpoint = <&i2s1_dap>; + mclk-fs = <256>; + }; + }; + }; + }; + + pwm@3280000 { + status = "okay"; + }; + pwm@32a0000 { assigned-clocks = <&bpmp TEGRA234_CLK_PWM3>; assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>; status = "okay"; }; + pwm@32c0000 { + status = "okay"; + }; + + pwm@32f0000 { + status = "okay"; + }; + + mmc@3400000 { + status = "okay"; + bus-width = <4>; + cd-gpios = <&gpio TEGRA234_MAIN_GPIO(G, 7) GPIO_ACTIVE_LOW>; + disable-wp; + }; + hda@3510000 { nvidia,model = "NVIDIA Jetson AGX Orin HDA"; status = "okay"; @@ -341,8 +415,11 @@ }; }; - pwm-fan { + fan: pwm-fan { + compatible = "pwm-fan"; cooling-levels = <66 215 255>; + pwms = <&pwm3 0 45334>; + #cooling-cells = <2>; }; serial { @@ -444,4 +521,31 @@ }; }; }; + + vdd_1v8_sys: regulator-vdd-1v8-sys { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8_SYS"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vdd_3v3_pcie: regulator-vdd-3v3-pcie { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_PCIE"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio TEGRA234_MAIN_GPIO(H, 4) GPIO_ACTIVE_HIGH>; + regulator-boot-on; + enable-active-high; + }; + + vdd_12v_pcie: regulator-vdd-12v-pcie { + compatible = "regulator-fixed"; + regulator-name = "VDD_12V_PCIE"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&gpio TEGRA234_MAIN_GPIO(A, 1) GPIO_ACTIVE_LOW>; + regulator-boot-on; + }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi deleted file mode 100644 index eb79e80a9852..000000000000 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi +++ /dev/null @@ -1,90 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 - -#include <dt-bindings/sound/rt5640.h> - -/ { - compatible = "nvidia,p3737-0000"; - - bus@0 { - aconnect@2900000 { - ahub@2900800 { - i2s@2901000 { - ports { - port@1 { - endpoint { - dai-format = "i2s"; - remote-endpoint = <&rt5640_ep>; - }; - }; - }; - }; - }; - }; - - i2c@3160000 { - status = "okay"; - - eeprom@56 { - compatible = "atmel,24c02"; - reg = <0x56>; - - label = "system"; - vcc-supply = <&vdd_1v8_sys>; - address-width = <8>; - pagesize = <8>; - size = <256>; - read-only; - }; - }; - - i2c@31e0000 { - status = "okay"; - - audio-codec@1c { - compatible = "realtek,rt5640"; - reg = <0x1c>; - interrupt-parent = <&gpio>; - interrupts = <TEGRA234_MAIN_GPIO(AC, 5) GPIO_ACTIVE_HIGH>; - clocks = <&bpmp TEGRA234_CLK_AUD_MCLK>; - clock-names = "mclk"; - realtek,dmic1-data-pin = <RT5640_DMIC1_DATA_PIN_NONE>; - realtek,dmic2-data-pin = <RT5640_DMIC2_DATA_PIN_NONE>; - realtek,jack-detect-source = <RT5640_JD_SRC_HDA_HEADER>; - sound-name-prefix = "CVB-RT"; - - port { - rt5640_ep: endpoint { - remote-endpoint = <&i2s1_dap>; - mclk-fs = <256>; - }; - }; - }; - }; - - pwm@3280000 { - status = "okay"; - }; - - pwm@32c0000 { - status = "okay"; - }; - - pwm@32f0000 { - status = "okay"; - }; - }; - - fan: pwm-fan { - compatible = "pwm-fan"; - pwms = <&pwm3 0 45334>; - #cooling-cells = <2>; - }; - - vdd_1v8_sys: regulator-vdd-1v8-sys { - compatible = "regulator-fixed"; - regulator-name = "VDD_1V8_SYS"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; -}; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts index bac611d735c5..36e888053746 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts @@ -3,8 +3,8 @@ #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/sound/rt5640.h> #include "tegra234-p3701-0008.dtsi" -#include "tegra234-p3740-0002.dtsi" / { model = "NVIDIA IGX Orin Development Kit"; @@ -20,6 +20,32 @@ }; bus@0 { + aconnect@2900000 { + ahub@2900800 { + i2s@2901300 { + ports { + port@1 { + endpoint { + dai-format = "i2s"; + remote-endpoint = <&rt5640_ep>; + }; + }; + }; + }; + + i2s@2901500 { + ports { + port@1 { + endpoint { + bitclock-master; + frame-master; + }; + }; + }; + }; + }; + }; + serial@3100000 { compatible = "nvidia,tegra194-hsuart"; reset-names = "serial"; @@ -45,6 +71,40 @@ i2c@31c0000 { status = "okay"; + rt5640: audio-codec@1c { + compatible = "realtek,rt5640"; + reg = <0x1c>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA234_MAIN_GPIO(F, 3) GPIO_ACTIVE_HIGH>; + clocks = <&bpmp TEGRA234_CLK_AUD_MCLK>; + clock-names = "mclk"; + + realtek,dmic1-data-pin = <RT5640_DMIC1_DATA_PIN_NONE>; + realtek,dmic2-data-pin = <RT5640_DMIC2_DATA_PIN_NONE>; + realtek,jack-detect-source = <RT5640_JD_SRC_HDA_HEADER>; + + sound-name-prefix = "CVB-RT"; + + port { + rt5640_ep: endpoint { + remote-endpoint = <&i2s4_dap>; + mclk-fs = <256>; + }; + }; + }; + + /* carrier board ID EEPROM */ + eeprom@55 { + compatible = "atmel,24c02"; + reg = <0x55>; + + label = "system"; + vcc-supply = <&vdd_1v8_ls>; + address-width = <8>; + pagesize = <8>; + size = <256>; + read-only; + }; }; i2c@31e0000 { @@ -60,6 +120,115 @@ status = "okay"; }; + padctl@3520000 { + status = "okay"; + + pads { + usb2 { + lanes { + usb2-0 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-1 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-2 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-3 { + nvidia,function = "xusb"; + status = "okay"; + }; + }; + }; + + usb3 { + lanes { + usb3-0 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb3-1 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb3-2 { + nvidia,function = "xusb"; + status = "okay"; + }; + }; + }; + }; + + ports { + usb2-0 { + mode = "otg"; + usb-role-switch; + status = "okay"; + }; + + usb2-1 { + mode = "host"; + status = "okay"; + }; + + usb2-2 { + mode = "host"; + status = "okay"; + }; + + usb2-3 { + mode = "host"; + status = "okay"; + }; + + usb3-0 { + nvidia,usb2-companion = <2>; + status = "okay"; + }; + + usb3-1 { + nvidia,usb2-companion = <0>; + status = "okay"; + }; + + usb3-2 { + nvidia,usb2-companion = <1>; + status = "okay"; + }; + }; + }; + + usb@3550000 { + status = "okay"; + + phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>; + phy-names = "usb2-0", "usb3-0"; + }; + + usb@3610000 { + status = "okay"; + + phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>, + <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>, + <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>, + <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-3}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-0}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>; + phy-names = "usb2-0", "usb2-1", "usb2-2", "usb2-3", + "usb3-0", "usb3-1", "usb3-2"; + }; + fuse@3810000 { status = "okay"; }; @@ -70,6 +239,37 @@ i2c@c250000 { status = "okay"; + + power-sensor@41 { + compatible = "ti,ina3221"; + reg = <0x41>; + #address-cells = <1>; + #size-cells = <0>; + + input@0 { + reg = <0x0>; + label = "CVB_ATX_12V"; + shunt-resistor-micro-ohms = <2000>; + }; + + input@1 { + reg = <0x1>; + label = "CVB_ATX_3V3"; + shunt-resistor-micro-ohms = <2000>; + }; + + input@2 { + reg = <0x2>; + label = "CVB_ATX_5V"; + shunt-resistor-micro-ohms = <2000>; + }; + }; + + power-sensor@44 { + compatible = "ti,ina219"; + reg = <0x44>; + shunt-resistor = <2000>; + }; }; host1x@13e00000 { @@ -235,4 +435,32 @@ "CVB-RT DMIC1", "CVB-RT MIC", "CVB-RT DMIC2", "CVB-RT MIC"; }; + + vdd_3v3_dp: regulator-vdd-3v3-dp { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_DP"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdd_3v3_sys>; + gpio = <&gpio TEGRA234_MAIN_GPIO(H, 6) 0>; + enable-active-high; + regulator-always-on; + }; + + vdd_3v3_sys: regulator-vdd-3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_SYS"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vdd_3v3_wifi: regulator-vdd-3v3-wifi { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_WIFI"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio TEGRA234_MAIN_GPIO(G, 3) GPIO_ACTIVE_HIGH>; + regulator-boot-on; + enable-active-high; + }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002.dtsi deleted file mode 100644 index 527f2f3aee3a..000000000000 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002.dtsi +++ /dev/null @@ -1,215 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 - -#include <dt-bindings/sound/rt5640.h> - -/ { - compatible = "nvidia,p3740-0002"; - - bus@0 { - aconnect@2900000 { - ahub@2900800 { - i2s@2901300 { - ports { - port@1 { - endpoint { - dai-format = "i2s"; - remote-endpoint = <&rt5640_ep>; - }; - }; - }; - }; - - i2s@2901500 { - ports { - port@1 { - endpoint { - bitclock-master; - frame-master; - }; - }; - }; - }; - }; - }; - - i2c@31c0000 { - rt5640: audio-codec@1c { - compatible = "realtek,rt5640"; - reg = <0x1c>; - interrupt-parent = <&gpio>; - interrupts = <TEGRA234_MAIN_GPIO(F, 3) GPIO_ACTIVE_HIGH>; - clocks = <&bpmp TEGRA234_CLK_AUD_MCLK>; - clock-names = "mclk"; - - realtek,dmic1-data-pin = <RT5640_DMIC1_DATA_PIN_NONE>; - realtek,dmic2-data-pin = <RT5640_DMIC2_DATA_PIN_NONE>; - realtek,jack-detect-source = <RT5640_JD_SRC_HDA_HEADER>; - - sound-name-prefix = "CVB-RT"; - - port { - rt5640_ep: endpoint { - remote-endpoint = <&i2s4_dap>; - mclk-fs = <256>; - }; - }; - }; - - /* carrier board ID EEPROM */ - eeprom@55 { - compatible = "atmel,24c02"; - reg = <0x55>; - - label = "system"; - vcc-supply = <&vdd_1v8_ls>; - address-width = <8>; - pagesize = <8>; - size = <256>; - read-only; - }; - }; - - padctl@3520000 { - vclamp-usb-supply = <&vdd_1v8_ao>; - avdd-usb-supply = <&vdd_3v3_ao>; - status = "okay"; - - pads { - usb2 { - lanes { - usb2-0 { - nvidia,function = "xusb"; - status = "okay"; - }; - - usb2-1 { - nvidia,function = "xusb"; - status = "okay"; - }; - - usb2-2 { - nvidia,function = "xusb"; - status = "okay"; - }; - - usb2-3 { - nvidia,function = "xusb"; - status = "okay"; - }; - }; - }; - - usb3 { - lanes { - usb3-0 { - nvidia,function = "xusb"; - status = "okay"; - }; - - usb3-1 { - nvidia,function = "xusb"; - status = "okay"; - }; - - usb3-2 { - nvidia,function = "xusb"; - status = "okay"; - }; - }; - }; - }; - - ports { - usb2-0 { - mode = "otg"; - usb-role-switch; - status = "okay"; - vbus-supply = <&vdd_5v0_sys>; - }; - - usb2-1 { - mode = "host"; - status = "okay"; - vbus-supply = <&vdd_5v0_sys>; - }; - - usb2-2 { - mode = "host"; - status = "okay"; - vbus-supply = <&vdd_5v0_sys>; - }; - - usb2-3 { - mode = "host"; - status = "okay"; - vbus-supply = <&vdd_5v0_sys>; - }; - - usb3-0 { - nvidia,usb2-companion = <2>; - status = "okay"; - }; - - usb3-1 { - nvidia,usb2-companion = <0>; - status = "okay"; - }; - - usb3-2 { - nvidia,usb2-companion = <1>; - status = "okay"; - }; - }; - }; - - usb@3550000 { - status = "okay"; - - phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>, - <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>; - phy-names = "usb2-0", "usb3-0"; - }; - - usb@3610000 { - status = "okay"; - - phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>, - <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>, - <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>, - <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-3}>, - <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-0}>, - <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>, - <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>; - phy-names = "usb2-0", "usb2-1", "usb2-2", "usb2-3", - "usb3-0", "usb3-1", "usb3-2"; - }; - }; - - vdd_3v3_dp: regulator-vdd-3v3-dp { - compatible = "regulator-fixed"; - regulator-name = "VDD_3V3_DP"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vdd_3v3_sys>; - gpio = <&gpio TEGRA234_MAIN_GPIO(H, 6) 0>; - enable-active-high; - regulator-always-on; - }; - - vdd_3v3_sys: regulator-vdd-3v3-sys { - compatible = "regulator-fixed"; - regulator-name = "VDD_3V3_SYS"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vdd_3v3_wifi: regulator-vdd-3v3-wifi { - compatible = "regulator-fixed"; - regulator-name = "VDD_3V3_WIFI"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio TEGRA234_MAIN_GPIO(G, 3) GPIO_ACTIVE_HIGH>; - regulator-boot-on; - enable-active-high; - }; -}; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts index 82a59e33c46c..5dc974bb360c 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts @@ -7,24 +7,7 @@ compatible = "nvidia,p3768-0000+p3767-0000", "nvidia,p3767-0000", "nvidia,tegra234"; model = "NVIDIA Jetson Orin NX Engineering Reference Developer Kit"; - aliases { - serial1 = &uarta; - serial2 = &uarte; - }; - bus@0 { - serial@3100000 { - compatible = "nvidia,tegra194-hsuart"; - reset-names = "serial"; - status = "okay"; - }; - - serial@3140000 { - compatible = "nvidia,tegra194-hsuart"; - reset-names = "serial"; - status = "okay"; - }; - hda@3510000 { nvidia,model = "NVIDIA Jetson Orin NX HDA"; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767.dtsi index 6d64a24fa251..19340d13f789 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767.dtsi @@ -9,6 +9,8 @@ aliases { serial0 = &tcu; + serial1 = &uarta; + serial2 = &uarte; }; chosen { @@ -16,6 +18,18 @@ }; bus@0 { + serial@3100000 { + compatible = "nvidia,tegra194-hsuart"; + reset-names = "serial"; + status = "okay"; + }; + + serial@3140000 { + compatible = "nvidia,tegra194-hsuart"; + reset-names = "serial"; + status = "okay"; + }; + i2c@3160000 { status = "okay"; @@ -172,6 +186,18 @@ phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3"; }; + pcie-ep@14160000 {/* C4 - End Point */ + phys = <&p2u_hsio_4>, <&p2u_hsio_5>, <&p2u_hsio_6>, + <&p2u_hsio_7>; + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3"; + reset-gpios = <&gpio + TEGRA234_MAIN_GPIO(L, 1) + GPIO_ACTIVE_LOW>; + nvidia,refclk-select-gpios = <&gpio_aon + TEGRA234_AON_GPIO(AA, 4) + GPIO_ACTIVE_HIGH>; + }; + /* C7 - M.2 Key-M */ pcie@141e0000 { status = "okay"; diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi index f2e2d8d6845b..984c85eab41a 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi @@ -2763,6 +2763,8 @@ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA234_CLK_UARTA>; resets = <&bpmp TEGRA234_RESET_UARTA>; + dmas = <&gpcdma 8>, <&gpcdma 8>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -4840,6 +4842,37 @@ status = "disabled"; }; + pcie-ep@14160000 { + compatible = "nvidia,tegra234-pcie-ep"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4BB>; + reg = <0x00 0x14160000 0x0 0x00020000 /* appl registers (128K) */ + 0x00 0x36040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ + 0x00 0x36080000 0x0 0x00040000 /* DBI space (256K) */ + 0x21 0x40000000 0x3 0x00000000>; /* Address Space (12G) */ + reg-names = "appl", "atu_dma", "dbi", "addr_space"; + num-lanes = <4>; + clocks = <&bpmp TEGRA234_CLK_PEX0_C4_CORE>; + clock-names = "core"; + resets = <&bpmp TEGRA234_RESET_PEX0_CORE_4_APB>, + <&bpmp TEGRA234_RESET_PEX0_CORE_4>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ + interrupt-names = "intr"; + nvidia,bpmp = <&bpmp 4>; + nvidia,enable-ext-refclk; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE4R &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE4W &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu_niso0 TEGRA234_SID_PCIE4>; + dma-coherent; + status = "disabled"; + }; + pcie@14180000 { compatible = "nvidia,tegra234-pcie"; power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4BA>; diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 0e5c810304fb..ae002c7cf126 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -48,18 +48,24 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-grandmax.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-grandprimelte.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-gt510.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-gt58.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-j3ltetw.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-j5.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-j5x.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-rossa.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-serranove.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-uf896.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-ufi001c.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt86518.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt86528.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-yiming-uz801v3.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8929-wingtech-wt82918hd.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8939-huawei-kiwi.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8939-longcheer-l9100.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8939-samsung-a7.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8939-sony-xperia-kanuti-tulip.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8939-wingtech-wt82918.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8939-wingtech-wt82918hd.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-motorola-potter.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-daisy.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-mido.dtb @@ -69,6 +75,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8956-sony-xperia-loire-kugo.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8956-sony-xperia-loire-suzu.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-10.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-101.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-h815.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-msft-lumia-octagon-talkman.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-xiaomi-libra.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-huawei-angler-rev-101.dtb @@ -261,7 +268,10 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8650-hdk-display-card.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8650-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8650-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8650-qrd.dtb +dtb-$(CONFIG_ARCH_QCOM) += x1e78100-lenovo-thinkpad-t14s.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-asus-vivobook-s15.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-lenovo-yoga-slim7x.dtb +dtb-$(CONFIG_ARCH_QCOM) += x1e80100-microsoft-romulus13.dtb +dtb-$(CONFIG_ARCH_QCOM) += x1e80100-microsoft-romulus15.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-qcp.dtb diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi index 0a74ed4f72cc..71328b223531 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/clock/qcom,apss-ipq.h> #include <dt-bindings/clock/qcom,ipq5332-gcc.h> +#include <dt-bindings/interconnect/qcom,ipq5332.h> #include <dt-bindings/interrupt-controller/arm-gic.h> / { @@ -208,6 +209,7 @@ reg = <0x01800000 0x80000>; #clock-cells = <1>; #reset-cells = <1>; + #interconnect-cells = <1>; clocks = <&xo_board>, <&sleep_clk>, <0>, @@ -327,11 +329,9 @@ "dm_hs_phy_irq"; clocks = <&gcc GCC_USB0_MASTER_CLK>, - <&gcc GCC_SNOC_USB_CLK>, <&gcc GCC_USB0_SLEEP_CLK>, <&gcc GCC_USB0_MOCK_UTMI_CLK>; clock-names = "core", - "iface", "sleep", "mock_utmi"; @@ -342,6 +342,9 @@ #address-cells = <1>; #size-cells = <1>; ranges; + interconnects = <&gcc MASTER_SNOC_USB &gcc SLAVE_SNOC_USB>, + <&gcc MASTER_SNOC_USB &gcc SLAVE_SNOC_USB>; + interconnect-names = "usb-ddr", "apps-usb"; status = "disabled"; diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index e1e45da7f787..8edd535a188f 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -168,7 +168,7 @@ mboxes = <&apcs_glb 0>; rpm_requests: rpm-requests { - compatible = "qcom,rpm-ipq6018"; + compatible = "qcom,rpm-ipq6018", "qcom,glink-smd-rpm"; qcom,glink-channels = "rpm_requests"; regulators { diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi index 48dfafea46a7..08a82a5cf667 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi @@ -181,7 +181,7 @@ mboxes = <&apcs_glb 0>; rpm_requests: rpm-requests { - compatible = "qcom,rpm-ipq9574"; + compatible = "qcom,rpm-ipq9574", "qcom,glink-smd-rpm"; qcom,glink-channels = "rpm_requests"; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts index 3b7fdb6797a9..2cc54eaf7202 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts @@ -125,6 +125,26 @@ }; }; }; + + flash-led-controller@53 { + compatible = "silergy,sy7802"; + reg = <0x53>; + + enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&camera_rear_flash_default>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <0>, <1>; + }; + }; }; &blsp_i2c3 { @@ -278,6 +298,13 @@ bias-disable; }; + camera_rear_flash_default: camera-rear-flash-default-state { + pins = "gpio9", "gpio16", "gpio117"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + gpio_keys_default: gpio-keys-default-state { pins = "gpio107"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi index 81b3e0760154..7a7e99b015d9 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi @@ -262,6 +262,8 @@ pinctrl-0 = <&tsp_int_default>; pinctrl-names = "default"; + + linux,keycodes = <KEY_APPSELECT KEY_BACK>; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts index 135df1739dbd..5ddb69bf8e78 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts @@ -47,12 +47,34 @@ constant-charge-voltage-max-microvolt = <4400000>; }; +&blsp_i2c5 { + status = "okay"; + + touchscreen@50 { + compatible = "imagis,ist3038"; + reg = <0x50>; + + interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>; + + touchscreen-size-x = <720>; + touchscreen-size-y = <1280>; + + vdd-supply = <®_vdd_tsp_a>; + vddio-supply = <&pm8916_l6>; + + pinctrl-0 = <&ts_int_default>; + pinctrl-names = "default"; + + linux,keycodes = <KEY_APPSELECT KEY_BACK>; + }; +}; + ®_motor_vdd { gpio = <&tlmm 72 GPIO_ACTIVE_HIGH>; }; ®_touch_key { - status = "disabled"; + status = "disabled"; /* Using Imagis touch key */ }; &sound { diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts index 579312ed53ce..3d6d9dd3b8a8 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts @@ -75,6 +75,7 @@ touchscreen-size-x = <768>; touchscreen-size-y = <1024>; + linux,keycodes = <KEY_APPSELECT KEY_BACK>; vcca-supply = <®_vdd_tsp>; vdd-supply = <&pm8916_l6>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j3-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-j3-common.dtsi new file mode 100644 index 000000000000..1d74cccc438a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j3-common.dtsi @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "msm8916-samsung-j5-common.dtsi" + +/ { + reserved-memory { + /delete-node/ tz-apps@85500000; + + /* Additional memory used by Samsung firmware modifications */ + tz-apps@85800000 { + reg = <0x0 0x85800000 0x0 0x800000>; + no-map; + }; + }; + + reg_vdd_tsp_a: regulator-vdd-tsp-a { + compatible = "regulator-fixed"; + regulator-name = "vdd_tsp_a"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + gpio = <&tlmm 16 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&tsp_ldo_en_default>; + pinctrl-names = "default"; + }; +}; + +&accelerometer { + vdd-supply = <&pm8916_l5>; + vddio-supply = <&pm8916_l5>; + + mount-matrix = "0", "-1", "0", + "1", "0", "0", + "0", "0", "-1"; +}; + +&gpio_hall_sensor { + status = "disabled"; +}; + +&i2c_muic { + /* GPIO pins vary depending on model variant */ +}; + +&i2c_sensors { + /* GPIO pins vary depending on model variant */ +}; + +&touchscreen { + vdd-supply = <®_vdd_tsp_a>; +}; + +&tlmm { + tsp_ldo_en_default: tsp-ldo-en-default-state { + pins = "gpio16"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j3ltetw.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-j3ltetw.dts new file mode 100644 index 000000000000..a26d2fd13c94 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j3ltetw.dts @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-samsung-j3-common.dtsi" + +/ { + model = "Samsung Galaxy J3 (2016) (SM-J320YZ)"; + compatible = "samsung,j3ltetw", "qcom,msm8916"; + chassis-type = "handset"; +}; + +&i2c_muic { + sda-gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; +}; + +&i2c_sensors { + /* I2C2 */ + sda-gpios = <&tlmm 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; +}; + +&muic_i2c_default { + pins = "gpio0", "gpio1"; +}; + +&sensors_i2c_default { + /* I2C2 */ + pins = "gpio6", "gpio7"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts index 1981bb71f6a9..3413b0970c4a 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts @@ -16,6 +16,26 @@ constant-charge-voltage-max-microvolt = <4400000>; }; +&blsp_i2c5 { + touchscreen@50 { + compatible = "imagis,ist3038"; + reg = <0x50>; + + interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>; + + touchscreen-size-x = <480>; + touchscreen-size-y = <800>; + + vdd-supply = <®_vdd_tsp_a>; + vddio-supply = <&pm8916_l6>; + + pinctrl-0 = <&tsp_int_default>; + pinctrl-names = "default"; + + linux,keycodes = <KEY_APPSELECT KEY_BACK>; + }; +}; + &mpss_mem { /* Firmware for rossa needs more space */ reg = <0x0 0x86800000 0x0 0x5800000>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt86518.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt86518.dts new file mode 100644 index 000000000000..3cfa80e38a9e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt86518.dts @@ -0,0 +1,87 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-wingtech-wt865x8.dtsi" + +/ { + model = "Lenovo A6000 (Wingtech WT86518)"; + compatible = "wingtech,wt86518", "qcom,msm8916"; + chassis-type = "handset"; + + speaker_amp: audio-amplifier { + compatible = "awinic,aw8738"; + + pinctrl-0 = <&spk_ext_pa_default>; + pinctrl-names = "default"; + + mode-gpios = <&tlmm 119 GPIO_ACTIVE_HIGH>; + sound-name-prefix = "Speaker Amp"; + awinic,mode = <1>; + }; +}; + +&blsp_i2c2 { + accelerometer@e { + compatible = "kionix,kxcj91008"; + reg = <0xe>; + + vdd-supply = <&pm8916_l6>; + vddio-supply = <&pm8916_l6>; + + mount-matrix = "0", "-1", "0", + "-1", "0", "0", + "0", "0", "1"; + }; +}; + +&headphones_switch { + VCC-supply = <&pm8916_l17>; +}; + +&pm8916_bms { + power-supplies = <&pm8916_charger>; +}; + +&pm8916_charger { + qcom,fast-charge-safe-current = <900000>; + qcom,fast-charge-safe-voltage = <4300000>; + + monitored-battery = <&battery>; + + status = "okay"; +}; + +&sound { + model = "wt88047"; + widgets = "Speaker", "Speaker", + "Headphone", "Headphones"; + pin-switches = "Speaker", "Headphones"; + audio-routing = "Speaker", "Speaker Amp OUT", + "Speaker Amp IN", "HPH_R", + "Headphones", "Headphones Switch OUTL", + "Headphones", "Headphones Switch OUTR", + "Headphones Switch INL", "HPH_L", + "Headphones Switch INR", "HPH_R", + "AMIC1", "MIC BIAS Internal1", + "AMIC2", "MIC BIAS Internal2"; + aux-devs = <&speaker_amp>, <&headphones_switch>; +}; + +&usb { + dr_mode = "peripheral"; + extcon = <&pm8916_charger>; +}; + +&usb_hs_phy { + extcon = <&pm8916_charger>; +}; + +&tlmm { + spk_ext_pa_default: spk-ext-pa-default-state { + pins = "gpio119"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt86528.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt86528.dts new file mode 100644 index 000000000000..ec2c4dcd3ead --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt86528.dts @@ -0,0 +1,158 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-wingtech-wt865x8.dtsi" + +/ { + model = "Lenovo A6010 (Wingtech WT86528)"; + compatible = "wingtech,wt86528", "qcom,msm8916"; + chassis-type = "handset"; + + /* left AW8736 */ + speaker_amp_left: audio-amplifier-left { + compatible = "awinic,aw8738"; + + pinctrl-0 = <&spk_ext_pa_left_default>; + pinctrl-names = "default"; + + mode-gpios = <&tlmm 119 GPIO_ACTIVE_HIGH>; + sound-name-prefix = "Speaker Amp L"; + awinic,mode = <3>; + }; + + /* right AW8736 */ + speaker_amp_right: audio-amplifier-right { + compatible = "awinic,aw8738"; + + pinctrl-0 = <&spk_ext_pa_right_default>; + pinctrl-names = "default"; + + mode-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>; + sound-name-prefix = "Speaker Amp R"; + awinic,mode = <3>; + }; + + gpio-leds { + compatible = "gpio-leds"; + + pinctrl-0 = <&gpio_leds_default>; + pinctrl-names = "default"; + + led-0 { + gpios = <&tlmm 16 GPIO_ACTIVE_LOW>; + label = "red"; + default-state = "off"; + retain-state-suspended; + }; + + led-1 { + gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>; + label = "green"; + default-state = "off"; + retain-state-suspended; + }; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&usb_id_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_i2c2 { + magnetometer@c { + compatible = "asahi-kasei,ak09911"; + reg = <0x0c>; + + vdd-supply = <&pm8916_l17>; + vid-supply = <&pm8916_l6>; + }; + + imu@68 { + compatible = "invensense,mpu6880"; + reg = <0x68>; + + interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + pinctrl-0 = <&imu_default>; + pinctrl-names = "default"; + + mount-matrix = "1", "0", "0", + "0", "-1", "0", + "0", "0", "1"; + }; +}; + +&pm8916_codec { + qcom,micbias1-ext-cap; +}; + +&sound { + model = "wt86528"; + widgets = "Speaker", "Speaker", + "Headphone", "Headphones"; + pin-switches = "Speaker", "Headphones"; + audio-routing = "Speaker", "Speaker Amp L OUT", + "Speaker", "Speaker Amp R OUT", + "Speaker Amp L IN", "HPH_L", + "Speaker Amp R IN", "HPH_R", + "Headphones", "Headphones Switch OUTL", + "Headphones", "Headphones Switch OUTR", + "Headphones Switch INL", "HPH_L", + "Headphones Switch INR", "HPH_R", + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + aux-devs = <&speaker_amp_left>, <&speaker_amp_right>, <&headphones_switch>; +}; + +&usb { + extcon = <&usb_id>, <&usb_id>; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&tlmm { + gpio_leds_default: gpio-leds-default-state { + pins = "gpio16", "gpio17"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + imu_default: imu-default-state { + pins = "gpio115"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + spk_ext_pa_left_default: spk-ext-pa-left-default-state { + pins = "gpio119"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + spk_ext_pa_right_default: spk-ext-pa-right-default-state { + pins = "gpio121"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + usb_id_default: usb-id-default-state { + pins = "gpio110"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt865x8.dtsi b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt865x8.dtsi new file mode 100644 index 000000000000..1a7c347dc3f0 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt865x8.dtsi @@ -0,0 +1,215 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "msm8916-pm8916.dtsi" +#include "msm8916-modem-qdsp6.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-mpp.h> + +/ { + aliases { + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + headphones_switch: audio-switch { + compatible = "simple-audio-amplifier"; + + pinctrl-0 = <&headphones_switch_default>; + pinctrl-names = "default"; + + enable-gpios = <&tlmm 120 GPIO_ACTIVE_HIGH>; + sound-name-prefix = "Headphones Switch"; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pm8916_pwm 0 100000>; + + brightness-levels = <0 255>; + num-interpolated-steps = <255>; + default-brightness-level = <255>; + }; + + battery: battery { + compatible = "simple-battery"; + voltage-min-design-microvolt = <3400000>; + voltage-max-design-microvolt = <4350000>; + energy-full-design-microwatt-hours = <8740000>; + charge-full-design-microamp-hours = <2300000>; + + ocv-capacity-celsius = <25>; + ocv-capacity-table-0 = <4328000 100>, <4266000 95>, <4208000 90>, + <4154000 85>, <4102000 80>, <4062000 75>, <3992000 70>, + <3960000 65>, <3914000 60>, <3870000 55>, <3840000 50>, + <3818000 45>, <3800000 40>, <3784000 35>, <3770000 30>, + <3756000 25>, <3736000 20>, <3714000 16>, <3696000 13>, + <3690000 11>, <3689000 10>, <3688000 9>, <3686000 8>, + <3682000 7>, <3670000 6>, <3639000 5>, <3592000 4>, + <3530000 3>, <3448000 2>, <3320000 1>, <3000000 0>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + label = "GPIO Buttons"; + + volume-up-button { + label = "Volume Up"; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5306"; + reg = <0x38>; + + interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>; + + vcc-supply = <&pm8916_l17>; + iovcc-supply = <&pm8916_l6>; + + reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; + + touchscreen-size-x = <720>; + touchscreen-size-y = <1280>; + + pinctrl-0 = <&touchscreen_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_uart2 { + status = "okay"; +}; + +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x5500000>; +}; + +&pm8916_bms { + monitored-battery = <&battery>; + status = "okay"; +}; + +&pm8916_codec { + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; + qcom,hphl-jack-type-normally-open; +}; + +&pm8916_pwm { + pinctrl-0 = <&pwm_out>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pm8916_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + +&pm8916_vib { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_default>; + pinctrl-1 = <&sdc2_sleep>; + pinctrl-names = "default", "sleep"; + + non-removable; + + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&venus { + status = "okay"; +}; + +&venus_mem { + status = "okay"; +}; + +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + +&wcnss_mem { + status = "okay"; +}; + +&tlmm { + gpio_keys_default: gpio-keys-default-state { + pins = "gpio107"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + headphones_switch_default: headphones-switch-default-state { + pins = "gpio120"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + touchscreen_default: touchscreen-default-state { + touchscreen-pins { + pins = "gpio13"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + reset-pins { + pins = "gpio12"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; +}; + +&pm8916_mpps { + pwm_out: mpp4-state { + pins = "mpp4"; + function = "digital"; + power-source = <PM8916_MPP_VPH>; + output-low; + qcom,dtest = <1>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 7383bcc603ab..0ee44706b70b 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -312,7 +312,7 @@ qcom,smd-edge = <15>; rpm_requests: rpm-requests { - compatible = "qcom,rpm-msm8916"; + compatible = "qcom,rpm-msm8916", "qcom,smd-rpm"; qcom,smd-channels = "rpm_requests"; rpmcc: clock-controller { diff --git a/arch/arm64/boot/dts/qcom/msm8929-pm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8929-pm8916.dtsi new file mode 100644 index 000000000000..c2bf25997e9b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8929-pm8916.dtsi @@ -0,0 +1,162 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * msm8929-pm8916.dtsi describes common properties (e.g. regulator connections) + * that apply to most devices that make use of the MSM8929 SoC and PM8916 PMIC. + * Many regulators have a fixed purpose in the original reference design and + * were rarely re-used for different purposes. Devices that deviate from the + * typical reference design should not make use of this include and instead add + * the necessary properties in the board-specific device tree. + */ + +#include "msm8929.dtsi" +#include "pm8916.dtsi" + +&mdss_dsi0 { + vdda-supply = <&pm8916_l2>; + vddio-supply = <&pm8916_l6>; +}; + +&mdss_dsi0_phy { + vddio-supply = <&pm8916_l6>; +}; + +&mdss_dsi1 { + vdda-supply = <&pm8916_l2>; + vddio-supply = <&pm8916_l6>; +}; + +&mdss_dsi1_phy { + vddio-supply = <&pm8916_l6>; +}; + +&mpss { + pll-supply = <&pm8916_l7>; +}; + +&pm8916_codec { + vdd-cdc-io-supply = <&pm8916_l5>; + vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>; + vdd-micbias-supply = <&pm8916_l13>; +}; + +&rpm_requests { + pm8916_rpm_regulators: regulators { + compatible = "qcom,rpm-pm8916-regulators"; + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + /* pm8916_s1 is managed by rpmpd (MSM8939_VDDMDCX) */ + /* pm8916_s2 is managed by rpmpd (MSM8939_VDDCX) */ + pm8916_s3: s3 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; /* Needed for L2 */ + }; + pm8916_s4: s4 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <2150000>; + regulator-always-on; /* Needed for L5/L7 */ + }; + + /* + * Some of the regulators are unused or managed by another + * processor (e.g. the modem). We should still define nodes for + * them to ensure the vote from the application processor can be + * dropped in case the regulators are already on during boot. + * + * The labels for these nodes are omitted on purpose because + * boards should configure a proper voltage before using them. + */ + l1 {}; + + pm8916_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; /* Needed for LPDDR RAM */ + }; + + /* pm8916_l3 is managed by rpmpd (MSM8939_VDDMX) */ + + l4 {}; + + pm8916_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; /* Needed for most digital I/O */ + }; + + pm8916_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8916_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; /* Needed for CPU PLL */ + }; + + pm8916_l8: l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + pm8916_l9: l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 {}; + + pm8916_l11: l11 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + pm8916_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8916_l13: l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 {}; + l15 {}; + l16 {}; + l17 {}; + l18 {}; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8916_l8>; + vqmmc-supply = <&pm8916_l5>; +}; + +&sdhc_2 { + vmmc-supply = <&pm8916_l11>; + vqmmc-supply = <&pm8916_l12>; +}; + +&usb_hs_phy { + v1p8-supply = <&pm8916_l7>; + v3p3-supply = <&pm8916_l13>; +}; + +&wcnss { + vddpx-supply = <&pm8916_l7>; +}; + +&wcnss_iris { + vddxo-supply = <&pm8916_l7>; + vddrfa-supply = <&pm8916_s3>; + vddpa-supply = <&pm8916_l9>; + vdddig-supply = <&pm8916_l5>; +}; + diff --git a/arch/arm64/boot/dts/qcom/msm8929-wingtech-wt82918hd.dts b/arch/arm64/boot/dts/qcom/msm8929-wingtech-wt82918hd.dts new file mode 100644 index 000000000000..8feecffb16bf --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8929-wingtech-wt82918hd.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8929-pm8916.dtsi" +#include "msm8939-wingtech-wt82918.dtsi" + +/ { + model = "Lenovo Vibe K5 (HD) (Wingtech WT82918)"; + compatible = "wingtech,wt82918hd", "qcom,msm8929"; + chassis-type = "handset"; +}; + +&touchscreen { + touchscreen-size-x = <720>; + touchscreen-size-y = <1280>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8929.dtsi b/arch/arm64/boot/dts/qcom/msm8929.dtsi new file mode 100644 index 000000000000..ef7bb1ced954 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8929.dtsi @@ -0,0 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "msm8939.dtsi" + +&opp_table { + /delete-node/ opp-550000000; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts b/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts index e3404c4455cf..b845da4fa23e 100644 --- a/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts +++ b/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts @@ -159,6 +159,26 @@ }; }; }; + + flash-led-controller@53 { + compatible = "silergy,sy7802"; + reg = <0x53>; + + enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&camera_rear_flash_default>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <0>, <1>; + }; + }; }; &blsp_i2c3 { @@ -318,6 +338,13 @@ bias-disable; }; + camera_rear_flash_default: camera-rear-flash-default-state { + pins = "gpio9", "gpio16", "gpio51"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + gpio_hall_sensor_default: gpio-hall-sensor-default-state { pins = "gpio20"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts b/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts index 91acdb160227..ceba6e73b211 100644 --- a/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts +++ b/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts @@ -198,7 +198,7 @@ }; }; - pwm_vibrator: pwm-vibrator { + pwm_vibrator: pwm { compatible = "clk-pwm"; #pwm-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/msm8939-wingtech-wt82918.dts b/arch/arm64/boot/dts/qcom/msm8939-wingtech-wt82918.dts new file mode 100644 index 000000000000..aa6b699aa2a1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8939-wingtech-wt82918.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8939-pm8916.dtsi" +#include "msm8939-wingtech-wt82918.dtsi" + +/ { + model = "Lenovo Vibe K5 (Wingtech WT82918)"; + compatible = "wingtech,wt82918", "qcom,msm8939"; + chassis-type = "handset"; +}; + +&touchscreen { + touchscreen-size-x = <1080>; + touchscreen-size-y = <1920>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8939-wingtech-wt82918.dtsi b/arch/arm64/boot/dts/qcom/msm8939-wingtech-wt82918.dtsi new file mode 100644 index 000000000000..800e0747a2f7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8939-wingtech-wt82918.dtsi @@ -0,0 +1,252 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "msm8916-modem-qdsp6.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-mpp.h> + +/ { + aliases { + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pm8916_pwm 0 100000>; + brightness-levels = <0 255>; + num-interpolated-steps = <255>; + default-brightness-level = <128>; + }; + + flash-led-controller { + compatible = "sgmicro,sgm3140"; + enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>; + flash-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&camera_front_flash_default>; + pinctrl-names = "default"; + + flash_led: led { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + label = "GPIO Buttons"; + + button-volume-up { + label = "Volume Up"; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + pinctrl-0 = <&gpio_leds_default>; + pinctrl-names = "default"; + + led-0 { + gpios = <&tlmm 69 GPIO_ACTIVE_LOW>; + function = LED_FUNCTION_CHARGING; + color = <LED_COLOR_ID_RED>; + default-state = "off"; + retain-state-suspended; + }; + + led-1 { + gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + retain-state-suspended; + }; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&usb_id_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + accelerometer@68 { + compatible = "invensense,icm20608"; + reg = <0x68>; + + interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&accelerometer_default>; + pinctrl-names = "default"; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + mount-matrix = "-1", "0", "0", + "0", "1", "0", + "0", "0", "1"; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen: touchscreen@38 { + compatible = "edt,edt-ft5306"; + reg = <0x38>; + + interrupts-extended = <&tlmm 13 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&touchscreen_default>; + pinctrl-names = "default"; + + vcc-supply = <&pm8916_l17>; + iovcc-supply = <&pm8916_l6>; + + reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; + }; +}; + +&blsp_uart2 { + status = "okay"; +}; + +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x5500000>; +}; + +&pm8916_pwm { + pinctrl-0 = <&pwm_out>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pm8916_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + +&pm8916_vib { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_default>; + pinctrl-1 = <&sdc2_sleep>; + pinctrl-names = "default", "sleep"; + non-removable; + status = "okay"; +}; + +&usb { + extcon = <&usb_id>, <&usb_id>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + +&wcnss_mem { + status = "okay"; +}; + +&tlmm { + accelerometer_default: accelerometer-default-state { + pins = "gpio115"; + function = "gpio"; + drive-strength = <6>; + bias-pull-up; + }; + + camera_front_flash_default: camera-front-flash-default-state { + pins = "gpio31", "gpio32"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default-state { + pins = "gpio107"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + gpio_leds_default: gpio-leds-default-state { + pins = "gpio36", "gpio69"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + touchscreen_default: touchscreen-default-state { + reset-pins { + pins = "gpio12"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + touchscreen-pins { + pins = "gpio13"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + usb_id_default: usb-id-default-state { + pins = "gpio110"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; +}; + +&pm8916_mpps { + pwm_out: mpp4-state { + pins = "mpp4"; + function = "digital"; + power-source = <PM8916_MPP_VPH>; + output-low; + qcom,dtest = <1>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8939-wingtech-wt82918hd.dts b/arch/arm64/boot/dts/qcom/msm8939-wingtech-wt82918hd.dts new file mode 100644 index 000000000000..59414db42508 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8939-wingtech-wt82918hd.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8939-pm8916.dtsi" +#include "msm8939-wingtech-wt82918.dtsi" + +/ { + model = "Lenovo Vibe K5 (HD) (Wingtech WT82918)"; + compatible = "wingtech,wt82918hdhw39", "qcom,msm8939"; + chassis-type = "handset"; +}; + +&touchscreen { + touchscreen-size-x = <720>; + touchscreen-size-y = <1280>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi index 46d9480cd464..28634789a8a9 100644 --- a/arch/arm64/boot/dts/qcom/msm8939.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi @@ -252,7 +252,7 @@ qcom,smd-edge = <15>; rpm_requests: rpm-requests { - compatible = "qcom,rpm-msm8936"; + compatible = "qcom,rpm-msm8936", "qcom,smd-rpm"; qcom,smd-channels = "rpm_requests"; rpmcc: clock-controller { diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi index a4bfb624fb8a..d20fd3d7c46e 100644 --- a/arch/arm64/boot/dts/qcom/msm8953.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi @@ -199,7 +199,7 @@ qcom,smd-edge = <15>; rpm_requests: rpm-requests { - compatible = "qcom,rpm-msm8953"; + compatible = "qcom,rpm-msm8953", "qcom,smd-rpm"; qcom,smd-channels = "rpm_requests"; rpmcc: clock-controller { diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi index d62dcb76fa48..06af6e5ec578 100644 --- a/arch/arm64/boot/dts/qcom/msm8976.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi @@ -247,7 +247,7 @@ qcom,smd-edge = <15>; rpm_requests: rpm-requests { - compatible = "qcom,rpm-msm8976"; + compatible = "qcom,rpm-msm8976", "qcom,smd-rpm"; qcom,smd-channels = "rpm_requests"; rpmcc: clock-controller { @@ -663,6 +663,11 @@ #thermal-sensor-cells = <1>; }; + restart@4ab000 { + compatible = "qcom,pshold"; + reg = <0x004ab000 0x4>; + }; + tlmm: pinctrl@1000000 { compatible = "qcom,msm8976-pinctrl"; reg = <0x01000000 0x300000>; diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-h815.dts b/arch/arm64/boot/dts/qcom/msm8992-lg-h815.dts new file mode 100644 index 000000000000..38b305816d2f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8992-lg-h815.dts @@ -0,0 +1,231 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * MSM8992 LG G4 (h815) device tree. + * + * Copyright (c) 2024, Alexander Reimelt <alexander.reimelt@posteo.de> + */ + +/dts-v1/; + +#include "msm8992.dtsi" +#include "pm8994.dtsi" +#include "pmi8994.dtsi" +#include <dt-bindings/leds/common.h> + +/* different mapping */ +/delete-node/ &cont_splash_mem; + +/* disabled downstream */ +/delete-node/ &dfps_data_mem; + +/ { + model = "LG G4 (H815)"; + compatible = "lg,h815", "qcom,msm8992"; + chassis-type = "handset"; + + qcom,msm-id = <0xfb 0x0>; + qcom,pmic-id = <0x10009 0x1000a 0x0 0x0>; + qcom,board-id = <0xb64 0x0>; + + /* psci is broken */ + /delete-node/ psci; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + spin-table@6000000 { + reg = <0x0 0x06000000 0x0 0x00001000>; + no-map; + }; + + ramoops@ff00000 { + compatible = "ramoops"; + reg = <0x0 0x0ff00000 0x0 0x00100000>; + console-size = <0x20000>; + pmsg-size = <0x20000>; + record-size = <0x10000>; + ecc-size = <0x10>; + }; + + cont_splash_mem: fb@3400000 { + reg = <0x0 0x03400000 0x0 0x00c00000>; + no-map; + }; + + crash_fb_mem: crash-fb@4000000 { + reg = <0x0 0x04000000 0x0 0x00c00000>; + no-map; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + + pinctrl-0 = <&hall_sensor_default>; + pinctrl-names = "default"; + + label = "Hall Effect Sensor"; + + event-hall-sensor { + gpios = <&tlmm 75 GPIO_ACTIVE_LOW>; + label = "hall effect sensor"; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + wakeup-source; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-vol-up { + label = "volume up"; + gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + wakeup-source; + debounce-interval = <15>; + }; + }; +}; + +&CPU0 { + enable-method = "spin-table"; +}; + +&CPU1 { + enable-method = "spin-table"; +}; + +&CPU2 { + enable-method = "spin-table"; +}; + +&CPU3 { + enable-method = "spin-table"; +}; + +&CPU4 { + enable-method = "spin-table"; +}; + +&CPU5 { + enable-method = "spin-table"; +}; + +&pm8994_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm8994-regulators"; + + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_l1-supply = <&pmi8994_s1>; + vdd_l2_26_28-supply = <&pm8994_s3>; + vdd_l3_11-supply = <&pm8994_s3>; + vdd_l4_27_31-supply = <&pm8994_s3>; + vdd_l5_7-supply = <&pm8994_s5>; + vdd_l6_12_32-supply = <&pm8994_s5>; + vdd_l8_16_30-supply = <&vph_pwr>; + vdd_l9_10_18_22-supply = <&pmi8994_bby>; + vdd_l13_19_23_24-supply = <&pmi8994_bby>; + vdd_l14_15-supply = <&pm8994_s5>; + vdd_l17_29-supply = <&pmi8994_bby>; + vdd_l20_21-supply = <&pmi8994_bby>; + vdd_l25-supply = <&pm8994_s5>; + vdd_lvs1_2-supply = <&pm8994_s4>; + + pm8994_s3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + /* sdhc1 vqmmc and bcm */ + pm8994_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-system-load = <325000>; + regulator-allow-set-load; + }; + + pm8994_s5: s5 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + + /* sdhc2 vqmmc */ + pm8994_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <22000>; + regulator-allow-set-load; + }; + + /* sdhc1 vmmc */ + pm8994_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <570000>; + regulator-allow-set-load; + }; + + /* sdhc2 vmmc */ + pm8994_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <800000>; + regulator-allow-set-load; + }; + }; + + regulators-1 { + compatible = "qcom,rpm-pmi8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_bst_byp-supply = <&vph_pwr>; + + pmi8994_s1: s1 { + regulator-min-microvolt = <1025000>; + regulator-max-microvolt = <1025000>; + }; + + /* S2 & S3 - VDD_GFX */ + + pmi8994_bby: boost-bypass { + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3600000>; + }; + }; +}; + +&sdhc1 { + mmc-hs400-1_8v; + vmmc-supply = <&pm8994_l20>; + vqmmc-supply = <&pm8994_s4>; + non-removable; + status = "okay"; +}; + +&sdhc2 { + vmmc-supply = <&pm8994_l21>; + vqmmc-supply = <&pm8994_l13>; + cd-gpios = <&pm8994_gpios 8 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&tlmm { + hall_sensor_default: hall-sensor-default-state { + pins = "gpio75"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index 917fa246857d..fc2a7f13f690 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -188,7 +188,7 @@ qcom,remote-pid = <6>; rpm_requests: rpm-requests { - compatible = "qcom,rpm-msm8994"; + compatible = "qcom,rpm-msm8994", "qcom,smd-rpm"; qcom,smd-channels = "rpm_requests"; rpmcc: clock-controller { diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 0fd2b1b944a5..e5966724f37c 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -472,7 +472,7 @@ mboxes = <&apcs_glb 0>; rpm_requests: rpm-requests { - compatible = "qcom,rpm-msm8996"; + compatible = "qcom,rpm-msm8996", "qcom,glink-smd-rpm"; qcom,glink-channels = "rpm_requests"; rpmcc: clock-controller { diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 7f44807b1b97..9aa9c5cee355 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -352,7 +352,7 @@ mboxes = <&apcs_glb 0>; rpm_requests: rpm-requests { - compatible = "qcom,rpm-msm8998"; + compatible = "qcom,rpm-msm8998", "qcom,glink-smd-rpm"; qcom,glink-channels = "rpm_requests"; rpmcc: clock-controller { @@ -1586,6 +1586,33 @@ "gpll0"; }; + lpass_q6_smmu: iommu@5100000 { + compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2"; + reg = <0x05100000 0x40000>; + clocks = <&gcc HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>; + clock-names = "bus"; + + #global-interrupts = <0>; + #iommu-cells = <1>; + interrupts = + <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; + + power-domains = <&gcc LPASS_ADSP_GDSC>; + status = "disabled"; + }; + remoteproc_slpi: remoteproc@5800000 { compatible = "qcom,msm8998-slpi-pas"; reg = <0x05800000 0x4040>; diff --git a/arch/arm64/boot/dts/qcom/pm8950.dtsi b/arch/arm64/boot/dts/qcom/pm8950.dtsi index f03095779de0..ed72c6101813 100644 --- a/arch/arm64/boot/dts/qcom/pm8950.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8950.dtsi @@ -18,7 +18,7 @@ #address-cells = <1>; #size-cells = <0>; - pon@800 { + pm8950_pon: pon@800 { compatible = "qcom,pm8916-pon"; reg = <0x0800>; mode-bootloader = <0x2>; @@ -31,6 +31,14 @@ bias-pull-up; linux,code = <KEY_POWER>; }; + + pm8950_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + status = "disabled"; + }; }; pm8950_temp: temp-alarm@2400 { diff --git a/arch/arm64/boot/dts/qcom/pmi8950.dtsi b/arch/arm64/boot/dts/qcom/pmi8950.dtsi index b4822cb17a37..4aff437263a2 100644 --- a/arch/arm64/boot/dts/qcom/pmi8950.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8950.dtsi @@ -84,9 +84,8 @@ #address-cells = <1>; #size-cells = <0>; - pmi8950_pwm: pwm@b000 { + pmi8950_pwm: pwm { compatible = "qcom,pmi8950-pwm"; - reg = <0xb000 0x100>; #pwm-cells = <2>; status = "disabled"; diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi index 36d6a1fb553a..9ee59e6d2cdb 100644 --- a/arch/arm64/boot/dts/qcom/pmi8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi @@ -57,8 +57,11 @@ interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>, <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>; interrupt-names = "ovp", "short"; + label = "backlight"; + qcom,cabc; qcom,external-pfet; + status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi index 8f3be4c75db3..79bc42ffb6a1 100644 --- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi +++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi @@ -215,7 +215,7 @@ mboxes = <&apcs_glb 0>; rpm_requests: rpm-requests { - compatible = "qcom,rpm-qcm2290"; + compatible = "qcom,rpm-qcm2290", "qcom,glink-smd-rpm"; qcom,glink-channels = "rpm_requests"; rpmcc: clock-controller { diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts index a0668f767e4b..84c45419cb8d 100644 --- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts @@ -641,6 +641,21 @@ status = "okay"; }; +&sdc2_clk { + bias-disable; + drive-strength = <16>; +}; + +&sdc2_cmd { + bias-pull-up; + drive-strength = <10>; +}; + +&sdc2_data { + bias-pull-up; + drive-strength = <10>; +}; + &sdhc_1 { non-removable; no-sd; @@ -652,9 +667,27 @@ status = "okay"; }; +&sdhc_2 { + status = "okay"; + + pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>; + pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>; + + vmmc-supply = <&vreg_l9c_2p96>; + vqmmc-supply = <&vreg_l6c_2p96>; + + cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; +}; + &tlmm { gpio-reserved-ranges = <32 2>, /* ADSP */ <48 4>; /* NFC */ + + sd_cd: sd-cd-state { + pins = "gpio91"; + function = "gpio"; + bias-pull-up; + }; }; &uart5 { diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index c291bbed6073..cddc16bac0ce 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -177,7 +177,7 @@ mboxes = <&apcs_glb 0>; rpm_requests: rpm-requests { - compatible = "qcom,rpm-qcs404"; + compatible = "qcom,rpm-qcs404", "qcom,glink-smd-rpm"; qcom,glink-channels = "rpm_requests"; rpmcc: clock-controller { diff --git a/arch/arm64/boot/dts/qcom/sa8155p.dtsi b/arch/arm64/boot/dts/qcom/sa8155p.dtsi index 9e70effc72e1..d678ed822378 100644 --- a/arch/arm64/boot/dts/qcom/sa8155p.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8155p.dtsi @@ -9,6 +9,10 @@ #include "sm8150.dtsi" +&camcc { + power-domains = <&rpmhpd SA8155P_CX>; +}; + &dispcc { power-domains = <&rpmhpd SA8155P_CX>; }; diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts index 78e933c42c31..2fd1dafe63ce 100644 --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts @@ -9,6 +9,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include "sa8540p.dtsi" #include "sa8540p-pmics.dtsi" @@ -109,6 +110,46 @@ }; }; + regulator-usb2-vbus { + compatible = "regulator-fixed"; + regulator-name = "USB2_VBUS"; + gpio = <&pmm8540c_gpios 9 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&usb2_en>; + pinctrl-names = "default"; + enable-active-high; + regulator-always-on; + }; + + regulator-usb3-vbus { + compatible = "regulator-fixed"; + regulator-name = "USB3_VBUS"; + gpio = <&pmm8540e_gpios 5 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&usb3_en>; + pinctrl-names = "default"; + enable-active-high; + regulator-always-on; + }; + + regulator-usb4-vbus { + compatible = "regulator-fixed"; + regulator-name = "USB4_VBUS"; + gpio = <&pmm8540g_gpios 5 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&usb4_en>; + pinctrl-names = "default"; + enable-active-high; + regulator-always-on; + }; + + regulator-usb5-vbus { + compatible = "regulator-fixed"; + regulator-name = "USB5_VBUS"; + gpio = <&pmm8540g_gpios 9 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&usb5_en>; + pinctrl-names = "default"; + enable-active-high; + regulator-always-on; + }; + reserved-memory { gpu_mem: gpu-mem@8bf00000 { reg = <0 0x8bf00000 0 0x2000>; @@ -637,6 +678,10 @@ status = "okay"; }; +&usb_2 { + status = "okay"; +}; + &usb_2_hsphy0 { vdda-pll-supply = <&vreg_l5a>; vdda18-supply = <&vreg_l7g>; @@ -697,6 +742,44 @@ }; }; +&pmm8540c_gpios { + usb2_en: usb2-en-state { + pins = "gpio9"; + function = "normal"; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; + output-enable; + power-source = <0>; + }; +}; + +&pmm8540e_gpios { + usb3_en: usb3-en-state { + pins = "gpio5"; + function = "normal"; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; + output-enable; + power-source = <0>; + }; +}; + +&pmm8540g_gpios { + usb4_en: usb4-en-state { + pins = "gpio5"; + function = "normal"; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; + output-enable; + power-source = <0>; + }; + + usb5_en: usb5-en-state { + pins = "gpio9"; + function = "normal"; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; + output-enable; + power-source = <0>; + }; +}; + &tlmm { pcie2a_default: pcie2a-default-state { clkreq-n-pins { diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi index 2a6170623ea9..0c1b21def4b6 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi @@ -702,6 +702,31 @@ status = "okay"; }; +&remoteproc_adsp { + firmware-name = "qcom/sa8775p/adsp.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp0 { + firmware-name = "qcom/sa8775p/cdsp0.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp1 { + firmware-name = "qcom/sa8775p/cdsp1.mbn"; + status = "okay"; +}; + +&remoteproc_gpdsp0 { + firmware-name = "qcom/sa8775p/gpdsp0.mbn"; + status = "okay"; +}; + +&remoteproc_gpdsp1 { + firmware-name = "qcom/sa8775p/gpdsp1.mbn"; + status = "okay"; +}; + &uart10 { compatible = "qcom,geni-debug-uart"; pinctrl-0 = <&qup_uart10_default>; diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi index 23f1b2e5e624..e8dbc8d820a6 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi @@ -10,6 +10,8 @@ #include <dt-bindings/clock/qcom,sa8775p-gpucc.h> #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h> #include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/firmware/qcom,scm.h> +#include <dt-bindings/power/qcom,rpmhpd.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> @@ -42,6 +44,8 @@ enable-method = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; next-level-cache = <&L2_0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; L2_0: l2-cache { compatible = "cache"; cache-level = <2>; @@ -62,6 +66,8 @@ enable-method = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; next-level-cache = <&L2_1>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; L2_1: l2-cache { compatible = "cache"; cache-level = <2>; @@ -77,6 +83,8 @@ enable-method = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; next-level-cache = <&L2_2>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; L2_2: l2-cache { compatible = "cache"; cache-level = <2>; @@ -92,6 +100,8 @@ enable-method = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; next-level-cache = <&L2_3>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; L2_3: l2-cache { compatible = "cache"; cache-level = <2>; @@ -107,6 +117,8 @@ enable-method = "psci"; qcom,freq-domain = <&cpufreq_hw 1>; next-level-cache = <&L2_4>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; L2_4: l2-cache { compatible = "cache"; cache-level = <2>; @@ -128,6 +140,8 @@ enable-method = "psci"; qcom,freq-domain = <&cpufreq_hw 1>; next-level-cache = <&L2_5>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; L2_5: l2-cache { compatible = "cache"; cache-level = <2>; @@ -143,6 +157,8 @@ enable-method = "psci"; qcom,freq-domain = <&cpufreq_hw 1>; next-level-cache = <&L2_6>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; L2_6: l2-cache { compatible = "cache"; cache-level = <2>; @@ -158,6 +174,8 @@ enable-method = "psci"; qcom,freq-domain = <&cpufreq_hw 1>; next-level-cache = <&L2_7>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; L2_7: l2-cache { compatible = "cache"; cache-level = <2>; @@ -203,6 +221,48 @@ }; }; }; + + idle-states { + entry-method = "psci"; + + GOLD_CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + idle-state-name = "gold-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <549>; + exit-latency-us = <901>; + min-residency-us = <1774>; + local-timer-stop; + }; + + GOLD_RAIL_CPU_SLEEP_0: cpu-sleep-1 { + compatible = "arm,idle-state"; + idle-state-name = "gold-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <702>; + exit-latency-us = <1061>; + min-residency-us = <4488>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_SLEEP_GOLD: cluster-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000044>; + entry-latency-us = <2752>; + exit-latency-us = <3048>; + min-residency-us = <6118>; + }; + + CLUSTER_SLEEP_APSS_RSC_PC: cluster-sleep-1 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x42000144>; + entry-latency-us = <3263>; + exit-latency-us = <6562>; + min-residency-us = <9987>; + }; + }; }; dummy-sink { @@ -332,6 +392,79 @@ psci { compatible = "arm,psci-1.0"; method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_0_PD>; + domain-idle-states = <&GOLD_CPU_SLEEP_0>, + <&GOLD_RAIL_CPU_SLEEP_0>; + }; + + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_0_PD>; + domain-idle-states = <&GOLD_CPU_SLEEP_0>, + <&GOLD_RAIL_CPU_SLEEP_0>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_0_PD>; + domain-idle-states = <&GOLD_CPU_SLEEP_0>, + <&GOLD_RAIL_CPU_SLEEP_0>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_0_PD>; + domain-idle-states = <&GOLD_CPU_SLEEP_0>, + <&GOLD_RAIL_CPU_SLEEP_0>; + }; + + CPU_PD4: power-domain-cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_1_PD>; + domain-idle-states = <&GOLD_CPU_SLEEP_0>, + <&GOLD_RAIL_CPU_SLEEP_0>; + }; + + CPU_PD5: power-domain-cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_1_PD>; + domain-idle-states = <&GOLD_CPU_SLEEP_0>, + <&GOLD_RAIL_CPU_SLEEP_0>; + }; + + CPU_PD6: power-domain-cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_1_PD>; + domain-idle-states = <&GOLD_CPU_SLEEP_0>, + <&GOLD_RAIL_CPU_SLEEP_0>; + }; + + CPU_PD7: power-domain-cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_1_PD>; + domain-idle-states = <&GOLD_CPU_SLEEP_0>, + <&GOLD_RAIL_CPU_SLEEP_0>; + }; + + CLUSTER_0_PD: power-domain-cluster0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_2_PD>; + domain-idle-states = <&CLUSTER_SLEEP_GOLD>; + }; + + CLUSTER_1_PD: power-domain-cluster1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_2_PD>; + domain-idle-states = <&CLUSTER_SLEEP_GOLD>; + }; + + CLUSTER_2_PD: power-domain-cluster2 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_APSS_RSC_PC>; + }; }; reserved-memory { @@ -564,6 +697,121 @@ }; }; + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp0 { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + smp2p_cdsp0_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_cdsp0_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp1 { + compatible = "qcom,smp2p"; + qcom,smem = <617>, <616>; + interrupts-extended = <&ipcc IPCC_CLIENT_NSP1 + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_NSP1 IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <12>; + + smp2p_cdsp1_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_cdsp1_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-gpdsp0 { + compatible = "qcom,smp2p"; + qcom,smem = <617>, <616>; + interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP0 + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_GPDSP0 IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <17>; + + smp2p_gpdsp0_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_gpdsp0_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-gpdsp1 { + compatible = "qcom,smp2p"; + qcom,smem = <617>, <616>; + interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP1 + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_GPDSP1 IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <18>; + + smp2p_gpdsp1_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_gpdsp1_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + soc: soc@0 { compatible = "simple-bus"; #address-cells = <2>; @@ -2892,6 +3140,101 @@ status = "disabled"; }; + pmu@9091000 { + compatible = "qcom,sa8775p-llcc-bwmon", "qcom,sc7280-llcc-bwmon"; + reg = <0x0 0x9091000 0x0 0x1000>; + interrupts = <GIC_SPI 620 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; + + operating-points-v2 = <&llcc_bwmon_opp_table>; + + llcc_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <762000>; + }; + + opp-1 { + opp-peak-kBps = <1720000>; + }; + + opp-2 { + opp-peak-kBps = <2086000>; + }; + + opp-3 { + opp-peak-kBps = <2601000>; + }; + + opp-4 { + opp-peak-kBps = <2929000>; + }; + + opp-5 { + opp-peak-kBps = <5931000>; + }; + + opp-6 { + opp-peak-kBps = <6515000>; + }; + + opp-7 { + opp-peak-kBps = <7984000>; + }; + + opp-8 { + opp-peak-kBps = <10437000>; + }; + + opp-9 { + opp-peak-kBps = <12195000>; + }; + }; + }; + + pmu@90b5400 { + compatible = "qcom,sa8775p-cpu-bwmon", "qcom,sdm845-bwmon"; + reg = <0x0 0x90b5400 0x0 0x600>; + interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>; + + operating-points-v2 = <&cpu_bwmon_opp_table>; + + cpu_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <9155000>; + }; + + opp-1 { + opp-peak-kBps = <12298000>; + }; + + opp-2 { + opp-peak-kBps = <14236000>; + }; + + opp-3 { + opp-peak-kBps = <16265000>; + }; + }; + + }; + + pmu@90b6400 { + compatible = "qcom,sa8775p-cpu-bwmon", "qcom,sdm845-bwmon"; + reg = <0x0 0x90b6400 0x0 0x600>; + interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>; + + operating-points-v2 = <&cpu_bwmon_opp_table>; + }; + llcc: system-cache-controller@9200000 { compatible = "qcom,sa8775p-llcc"; reg = <0x0 0x09200000 0x0 0x80000>, @@ -3070,6 +3413,7 @@ reg = <0x0 0x15000000 0x0 0x100000>; #iommu-cells = <2>; #global-interrupts = <2>; + dma-coherent; interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, @@ -3208,6 +3552,7 @@ reg = <0x0 0x15200000 0x0 0x80000>; #iommu-cells = <2>; #global-interrupts = <2>; + dma-coherent; interrupts = <GIC_SPI 920 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 921 IRQ_TYPE_LEVEL_HIGH>, @@ -3445,6 +3790,92 @@ #freq-domain-cells = <1>; }; + remoteproc_gpdsp0: remoteproc@20c00000 { + compatible = "qcom,sa8775p-gpdsp0-pas"; + reg = <0x0 0x20c00000 0x0 0x10000>; + + interrupts-extended = <&intc GIC_SPI 768 IRQ_TYPE_EDGE_RISING>, + <&smp2p_gpdsp0_in 0 0>, + <&smp2p_gpdsp0_in 2 0>, + <&smp2p_gpdsp0_in 1 0>, + <&smp2p_gpdsp0_in 3 0>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_CX>, + <&rpmhpd RPMHPD_MXC>; + power-domain-names = "cx", "mxc"; + + interconnects = <&gpdsp_anoc MASTER_DSP0 0 + &config_noc SLAVE_CLK_CTL 0>; + + memory-region = <&pil_gdsp0_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_gpdsp0_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP0 + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_GPDSP0 + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "gpdsp0"; + qcom,remote-pid = <17>; + }; + }; + + remoteproc_gpdsp1: remoteproc@21c00000 { + compatible = "qcom,sa8775p-gpdsp1-pas"; + reg = <0x0 0x21c00000 0x0 0x10000>; + + interrupts-extended = <&intc GIC_SPI 624 IRQ_TYPE_EDGE_RISING>, + <&smp2p_gpdsp1_in 0 0>, + <&smp2p_gpdsp1_in 2 0>, + <&smp2p_gpdsp1_in 1 0>, + <&smp2p_gpdsp1_in 3 0>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_CX>, + <&rpmhpd RPMHPD_MXC>; + power-domain-names = "cx", "mxc"; + + interconnects = <&gpdsp_anoc MASTER_DSP1 0 + &config_noc SLAVE_CLK_CTL 0>; + + memory-region = <&pil_gdsp1_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_gpdsp1_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP1 + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_GPDSP1 + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "gpdsp1"; + qcom,remote-pid = <18>; + }; + }; + ethernet1: ethernet@23000000 { compatible = "qcom,sa8775p-ethqos"; reg = <0x0 0x23000000 0x0 0x10000>, @@ -3464,6 +3895,12 @@ "ptp_ref", "phyaux"; + interconnects = <&aggre1_noc MASTER_EMAC_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_EMAC1_CFG QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "mac-mem", "cpu-mac"; + power-domains = <&gcc EMAC1_GDSC>; phys = <&serdes1>; @@ -3499,6 +3936,12 @@ "ptp_ref", "phyaux"; + interconnects = <&aggre1_noc MASTER_EMAC QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_EMAC_CFG QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "mac-mem", "cpu-mac"; + power-domains = <&gcc EMAC0_GDSC>; phys = <&serdes0>; @@ -3514,6 +3957,569 @@ status = "disabled"; }; + + remoteproc_cdsp0: remoteproc@26300000 { + compatible = "qcom,sa8775p-cdsp0-pas"; + reg = <0x0 0x26300000 0x0 0x10000>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp0_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp0_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp0_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp0_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_CX>, + <&rpmhpd RPMHPD_MXC>, + <&rpmhpd RPMHPD_NSP0>; + power-domain-names = "cx", "mxc", "nsp"; + + interconnects = <&nspa_noc MASTER_CDSP_PROC 0 + &mc_virt SLAVE_EBI1 0>; + + memory-region = <&pil_cdsp0_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_cdsp0_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "cdsp"; + qcom,remote-pid = <5>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x2141 0x04a0>, + <&apps_smmu 0x2161 0x04a0>, + <&apps_smmu 0x2181 0x0400>, + <&apps_smmu 0x21c1 0x04a0>, + <&apps_smmu 0x21e1 0x04a0>, + <&apps_smmu 0x2541 0x04a0>, + <&apps_smmu 0x2561 0x04a0>, + <&apps_smmu 0x2581 0x0400>, + <&apps_smmu 0x25c1 0x04a0>, + <&apps_smmu 0x25e1 0x04a0>; + dma-coherent; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x2142 0x04a0>, + <&apps_smmu 0x2162 0x04a0>, + <&apps_smmu 0x2182 0x0400>, + <&apps_smmu 0x21c2 0x04a0>, + <&apps_smmu 0x21e2 0x04a0>, + <&apps_smmu 0x2542 0x04a0>, + <&apps_smmu 0x2562 0x04a0>, + <&apps_smmu 0x2582 0x0400>, + <&apps_smmu 0x25c2 0x04a0>, + <&apps_smmu 0x25e2 0x04a0>; + dma-coherent; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x2143 0x04a0>, + <&apps_smmu 0x2163 0x04a0>, + <&apps_smmu 0x2183 0x0400>, + <&apps_smmu 0x21c3 0x04a0>, + <&apps_smmu 0x21e3 0x04a0>, + <&apps_smmu 0x2543 0x04a0>, + <&apps_smmu 0x2563 0x04a0>, + <&apps_smmu 0x2583 0x0400>, + <&apps_smmu 0x25c3 0x04a0>, + <&apps_smmu 0x25e3 0x04a0>; + dma-coherent; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x2144 0x04a0>, + <&apps_smmu 0x2164 0x04a0>, + <&apps_smmu 0x2184 0x0400>, + <&apps_smmu 0x21c4 0x04a0>, + <&apps_smmu 0x21e4 0x04a0>, + <&apps_smmu 0x2544 0x04a0>, + <&apps_smmu 0x2564 0x04a0>, + <&apps_smmu 0x2584 0x0400>, + <&apps_smmu 0x25c4 0x04a0>, + <&apps_smmu 0x25e4 0x04a0>; + dma-coherent; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x2145 0x04a0>, + <&apps_smmu 0x2165 0x04a0>, + <&apps_smmu 0x2185 0x0400>, + <&apps_smmu 0x21c5 0x04a0>, + <&apps_smmu 0x21e5 0x04a0>, + <&apps_smmu 0x2545 0x04a0>, + <&apps_smmu 0x2565 0x04a0>, + <&apps_smmu 0x2585 0x0400>, + <&apps_smmu 0x25c5 0x04a0>, + <&apps_smmu 0x25e5 0x04a0>; + dma-coherent; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x2146 0x04a0>, + <&apps_smmu 0x2166 0x04a0>, + <&apps_smmu 0x2186 0x0400>, + <&apps_smmu 0x21c6 0x04a0>, + <&apps_smmu 0x21e6 0x04a0>, + <&apps_smmu 0x2546 0x04a0>, + <&apps_smmu 0x2566 0x04a0>, + <&apps_smmu 0x2586 0x0400>, + <&apps_smmu 0x25c6 0x04a0>, + <&apps_smmu 0x25e6 0x04a0>; + dma-coherent; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x2147 0x04a0>, + <&apps_smmu 0x2167 0x04a0>, + <&apps_smmu 0x2187 0x0400>, + <&apps_smmu 0x21c7 0x04a0>, + <&apps_smmu 0x21e7 0x04a0>, + <&apps_smmu 0x2547 0x04a0>, + <&apps_smmu 0x2567 0x04a0>, + <&apps_smmu 0x2587 0x0400>, + <&apps_smmu 0x25c7 0x04a0>, + <&apps_smmu 0x25e7 0x04a0>; + dma-coherent; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x2148 0x04a0>, + <&apps_smmu 0x2168 0x04a0>, + <&apps_smmu 0x2188 0x0400>, + <&apps_smmu 0x21c8 0x04a0>, + <&apps_smmu 0x21e8 0x04a0>, + <&apps_smmu 0x2548 0x04a0>, + <&apps_smmu 0x2568 0x04a0>, + <&apps_smmu 0x2588 0x0400>, + <&apps_smmu 0x25c8 0x04a0>, + <&apps_smmu 0x25e8 0x04a0>; + dma-coherent; + }; + + compute-cb@9 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <9>; + iommus = <&apps_smmu 0x2149 0x04a0>, + <&apps_smmu 0x2169 0x04a0>, + <&apps_smmu 0x2189 0x0400>, + <&apps_smmu 0x21c9 0x04a0>, + <&apps_smmu 0x21e9 0x04a0>, + <&apps_smmu 0x2549 0x04a0>, + <&apps_smmu 0x2569 0x04a0>, + <&apps_smmu 0x2589 0x0400>, + <&apps_smmu 0x25c9 0x04a0>, + <&apps_smmu 0x25e9 0x04a0>; + dma-coherent; + }; + + compute-cb@10 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <10>; + iommus = <&apps_smmu 0x214a 0x04a0>, + <&apps_smmu 0x216a 0x04a0>, + <&apps_smmu 0x218a 0x0400>, + <&apps_smmu 0x21ca 0x04a0>, + <&apps_smmu 0x21ea 0x04a0>, + <&apps_smmu 0x254a 0x04a0>, + <&apps_smmu 0x256a 0x04a0>, + <&apps_smmu 0x258a 0x0400>, + <&apps_smmu 0x25ca 0x04a0>, + <&apps_smmu 0x25ea 0x04a0>; + dma-coherent; + }; + + compute-cb@11 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <11>; + iommus = <&apps_smmu 0x214b 0x04a0>, + <&apps_smmu 0x216b 0x04a0>, + <&apps_smmu 0x218b 0x0400>, + <&apps_smmu 0x21cb 0x04a0>, + <&apps_smmu 0x21eb 0x04a0>, + <&apps_smmu 0x254b 0x04a0>, + <&apps_smmu 0x256b 0x04a0>, + <&apps_smmu 0x258b 0x0400>, + <&apps_smmu 0x25cb 0x04a0>, + <&apps_smmu 0x25eb 0x04a0>; + dma-coherent; + }; + }; + }; + }; + + remoteproc_cdsp1: remoteproc@2a300000 { + compatible = "qcom,sa8775p-cdsp1-pas"; + reg = <0x0 0x2A300000 0x0 0x10000>; + + interrupts-extended = <&intc GIC_SPI 798 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp1_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp1_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp1_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp1_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_CX>, + <&rpmhpd RPMHPD_MXC>, + <&rpmhpd RPMHPD_NSP1>; + power-domain-names = "cx", "mxc", "nsp"; + + interconnects = <&nspb_noc MASTER_CDSP_PROC_B 0 + &mc_virt SLAVE_EBI1 0>; + + memory-region = <&pil_cdsp1_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_cdsp1_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_NSP1 + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_NSP1 + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "cdsp"; + qcom,remote-pid = <12>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp1"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x2941 0x04a0>, + <&apps_smmu 0x2961 0x04a0>, + <&apps_smmu 0x2981 0x0400>, + <&apps_smmu 0x29c1 0x04a0>, + <&apps_smmu 0x29e1 0x04a0>, + <&apps_smmu 0x2d41 0x04a0>, + <&apps_smmu 0x2d61 0x04a0>, + <&apps_smmu 0x2d81 0x0400>, + <&apps_smmu 0x2dc1 0x04a0>, + <&apps_smmu 0x2de1 0x04a0>; + dma-coherent; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x2942 0x04a0>, + <&apps_smmu 0x2962 0x04a0>, + <&apps_smmu 0x2982 0x0400>, + <&apps_smmu 0x29c2 0x04a0>, + <&apps_smmu 0x29e2 0x04a0>, + <&apps_smmu 0x2d42 0x04a0>, + <&apps_smmu 0x2d62 0x04a0>, + <&apps_smmu 0x2d82 0x0400>, + <&apps_smmu 0x2dc2 0x04a0>, + <&apps_smmu 0x2de2 0x04a0>; + dma-coherent; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x2943 0x04a0>, + <&apps_smmu 0x2963 0x04a0>, + <&apps_smmu 0x2983 0x0400>, + <&apps_smmu 0x29c3 0x04a0>, + <&apps_smmu 0x29e3 0x04a0>, + <&apps_smmu 0x2d43 0x04a0>, + <&apps_smmu 0x2d63 0x04a0>, + <&apps_smmu 0x2d83 0x0400>, + <&apps_smmu 0x2dc3 0x04a0>, + <&apps_smmu 0x2de3 0x04a0>; + dma-coherent; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x2944 0x04a0>, + <&apps_smmu 0x2964 0x04a0>, + <&apps_smmu 0x2984 0x0400>, + <&apps_smmu 0x29c4 0x04a0>, + <&apps_smmu 0x29e4 0x04a0>, + <&apps_smmu 0x2d44 0x04a0>, + <&apps_smmu 0x2d64 0x04a0>, + <&apps_smmu 0x2d84 0x0400>, + <&apps_smmu 0x2dc4 0x04a0>, + <&apps_smmu 0x2de4 0x04a0>; + dma-coherent; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x2945 0x04a0>, + <&apps_smmu 0x2965 0x04a0>, + <&apps_smmu 0x2985 0x0400>, + <&apps_smmu 0x29c5 0x04a0>, + <&apps_smmu 0x29e5 0x04a0>, + <&apps_smmu 0x2d45 0x04a0>, + <&apps_smmu 0x2d65 0x04a0>, + <&apps_smmu 0x2d85 0x0400>, + <&apps_smmu 0x2dc5 0x04a0>, + <&apps_smmu 0x2de5 0x04a0>; + dma-coherent; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x2946 0x04a0>, + <&apps_smmu 0x2966 0x04a0>, + <&apps_smmu 0x2986 0x0400>, + <&apps_smmu 0x29c6 0x04a0>, + <&apps_smmu 0x29e6 0x04a0>, + <&apps_smmu 0x2d46 0x04a0>, + <&apps_smmu 0x2d66 0x04a0>, + <&apps_smmu 0x2d86 0x0400>, + <&apps_smmu 0x2dc6 0x04a0>, + <&apps_smmu 0x2de6 0x04a0>; + dma-coherent; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x2947 0x04a0>, + <&apps_smmu 0x2967 0x04a0>, + <&apps_smmu 0x2987 0x0400>, + <&apps_smmu 0x29c7 0x04a0>, + <&apps_smmu 0x29e7 0x04a0>, + <&apps_smmu 0x2d47 0x04a0>, + <&apps_smmu 0x2d67 0x04a0>, + <&apps_smmu 0x2d87 0x0400>, + <&apps_smmu 0x2dc7 0x04a0>, + <&apps_smmu 0x2de7 0x04a0>; + dma-coherent; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x2948 0x04a0>, + <&apps_smmu 0x2968 0x04a0>, + <&apps_smmu 0x2988 0x0400>, + <&apps_smmu 0x29c8 0x04a0>, + <&apps_smmu 0x29e8 0x04a0>, + <&apps_smmu 0x2d48 0x04a0>, + <&apps_smmu 0x2d68 0x04a0>, + <&apps_smmu 0x2d88 0x0400>, + <&apps_smmu 0x2dc8 0x04a0>, + <&apps_smmu 0x2de8 0x04a0>; + dma-coherent; + }; + + compute-cb@9 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <9>; + iommus = <&apps_smmu 0x2949 0x04a0>, + <&apps_smmu 0x2969 0x04a0>, + <&apps_smmu 0x2989 0x0400>, + <&apps_smmu 0x29c9 0x04a0>, + <&apps_smmu 0x29e9 0x04a0>, + <&apps_smmu 0x2d49 0x04a0>, + <&apps_smmu 0x2d69 0x04a0>, + <&apps_smmu 0x2d89 0x0400>, + <&apps_smmu 0x2dc9 0x04a0>, + <&apps_smmu 0x2de9 0x04a0>; + dma-coherent; + }; + + compute-cb@10 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <10>; + iommus = <&apps_smmu 0x294a 0x04a0>, + <&apps_smmu 0x296a 0x04a0>, + <&apps_smmu 0x298a 0x0400>, + <&apps_smmu 0x29ca 0x04a0>, + <&apps_smmu 0x29ea 0x04a0>, + <&apps_smmu 0x2d4a 0x04a0>, + <&apps_smmu 0x2d6a 0x04a0>, + <&apps_smmu 0x2d8a 0x0400>, + <&apps_smmu 0x2dca 0x04a0>, + <&apps_smmu 0x2dea 0x04a0>; + dma-coherent; + }; + + compute-cb@11 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <11>; + iommus = <&apps_smmu 0x294b 0x04a0>, + <&apps_smmu 0x296b 0x04a0>, + <&apps_smmu 0x298b 0x0400>, + <&apps_smmu 0x29cb 0x04a0>, + <&apps_smmu 0x29eb 0x04a0>, + <&apps_smmu 0x2d4b 0x04a0>, + <&apps_smmu 0x2d6b 0x04a0>, + <&apps_smmu 0x2d8b 0x0400>, + <&apps_smmu 0x2dcb 0x04a0>, + <&apps_smmu 0x2deb 0x04a0>; + dma-coherent; + }; + + compute-cb@12 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <12>; + iommus = <&apps_smmu 0x294c 0x04a0>, + <&apps_smmu 0x296c 0x04a0>, + <&apps_smmu 0x298c 0x0400>, + <&apps_smmu 0x29cc 0x04a0>, + <&apps_smmu 0x29ec 0x04a0>, + <&apps_smmu 0x2d4c 0x04a0>, + <&apps_smmu 0x2d6c 0x04a0>, + <&apps_smmu 0x2d8c 0x0400>, + <&apps_smmu 0x2dcc 0x04a0>, + <&apps_smmu 0x2dec 0x04a0>; + dma-coherent; + }; + + compute-cb@13 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <13>; + iommus = <&apps_smmu 0x294d 0x04a0>, + <&apps_smmu 0x296d 0x04a0>, + <&apps_smmu 0x298d 0x0400>, + <&apps_smmu 0x29Cd 0x04a0>, + <&apps_smmu 0x29ed 0x04a0>, + <&apps_smmu 0x2d4d 0x04a0>, + <&apps_smmu 0x2d6d 0x04a0>, + <&apps_smmu 0x2d8d 0x0400>, + <&apps_smmu 0x2dcd 0x04a0>, + <&apps_smmu 0x2ded 0x04a0>; + dma-coherent; + }; + }; + }; + }; + + remoteproc_adsp: remoteproc@30000000 { + compatible = "qcom,sa8775p-adsp-pas"; + reg = <0x0 0x30000000 0x0 0x100>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_LCX>, + <&rpmhpd RPMHPD_LMX>; + power-domain-names = "lcx", "lmx"; + + interconnects = <&lpass_ag_noc MASTER_LPASS_PROC 0 &mc_virt SLAVE_EBI1 0>; + + memory-region = <&pil_adsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + remoteproc_adsp_glink: glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + memory-region = <&adsp_rpc_remote_heap_mem>; + qcom,vmids = <QCOM_SCM_VMID_LPASS + QCOM_SCM_VMID_ADSP_HEAP>; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x3003 0x0>; + dma-coherent; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x3004 0x0>; + dma-coherent; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x3005 0x0>; + qcom,nsessions = <5>; + dma-coherent; + }; + }; + }; + }; }; thermal-zones { diff --git a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts index 5b226577f9d8..62de4774c556 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts +++ b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts @@ -484,6 +484,10 @@ status = "okay"; }; +&pmc8180_pwrkey { + status = "okay"; +}; + &pmc8180c_lpg { status = "okay"; }; @@ -557,6 +561,40 @@ status = "okay"; }; +&usb_mp { + status = "okay"; +}; + +&usb_mp_hsphy0 { + vdda-pll-supply = <&vreg_l5e_0p88>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l16e_3p0>; + + status = "okay"; +}; + +&usb_mp_hsphy1 { + vdda-pll-supply = <&vreg_l5e_0p88>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l16e_3p0>; + + status = "okay"; +}; + +&usb_mp_qmpphy0 { + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l5e_0p88>; + + status = "okay"; +}; + +&usb_mp_qmpphy1 { + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l5e_0p88>; + + status = "okay"; +}; + &usb_prim_hsphy { vdda-pll-supply = <&vreg_l5e_0p88>; vdda18-supply = <&vreg_l12a_1p8>; diff --git a/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi index 1c6f12fafe1d..451c9b984f1f 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi @@ -75,7 +75,7 @@ pon: pon@800 { compatible = "qcom,pm8916-pon"; reg = <0x0800>; - pwrkey { + pmc8180_pwrkey: pwrkey { compatible = "qcom,pm8941-pwrkey"; interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>; debounce = <15625>; @@ -139,11 +139,11 @@ interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; }; - pmc8180_gpios: gpio@c000 { + pmc8180_1_gpios: gpio@c000 { compatible = "qcom,pmc8180-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; - gpio-ranges = <&pmc8180_gpios 0 0 10>; + gpio-ranges = <&pmc8180_1_gpios 0 0 10>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -198,11 +198,21 @@ #size-cells = <0>; }; - pmic@8 { + pmc8180_2: pmic@8 { compatible = "qcom,pm8150", "qcom,spmi-pmic"; reg = <0x8 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + + pmc8180_2_gpios: gpio@c000 { + compatible = "qcom,pmc8180-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pmc8180_2_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; }; pmic@a { diff --git a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts index 65d923497a05..79b4d293ea1e 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts +++ b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts @@ -223,6 +223,32 @@ vin-supply = <&vph_pwr>; }; + vreg_usb2_host_en: regulator-usb2-host-en { + compatible = "regulator-fixed"; + regulator-name = "usb2_host_en"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&pmc8180_1_gpios 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + + regulator-always-on; + }; + + vreg_usb3_host_en: regulator-usb3-host-en { + compatible = "regulator-fixed"; + regulator-name = "usb3_host_en"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&pmc8180_2_gpios 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + + regulator-always-on; + }; + usbprim-sbu-mux { compatible = "pericom,pi3usb102", "gpio-sbu-mux"; @@ -552,6 +578,10 @@ status = "okay"; }; +&pmc8180_pwrkey { + status = "okay"; +}; + &pmc8180c_lpg { status = "okay"; }; @@ -623,6 +653,40 @@ status = "okay"; }; +&usb_mp { + status = "okay"; +}; + +&usb_mp_hsphy0 { + vdda-pll-supply = <&vreg_l5e_0p88>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l16e_3p0>; + + status = "okay"; +}; + +&usb_mp_hsphy1 { + vdda-pll-supply = <&vreg_l5e_0p88>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l16e_3p0>; + + status = "okay"; +}; + +&usb_mp_qmpphy0 { + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l5e_0p88>; + + status = "okay"; +}; + +&usb_mp_qmpphy1 { + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l5e_0p88>; + + status = "okay"; +}; + &usb_prim_hsphy { vdda-pll-supply = <&vreg_l5e_0p88>; vdda18-supply = <&vreg_l12a_1p8>; diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi index 6e707d993aeb..0e9429684dd9 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi @@ -2507,6 +2507,34 @@ status = "disabled"; }; + usb_mp_hsphy0: phy@88e4000 { + compatible = "qcom,sc8180x-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e4000 0 0x400>; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_MP0_BCR>; + + status = "disabled"; + }; + + usb_mp_hsphy1: phy@88e5000 { + compatible = "qcom,sc8180x-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e5000 0 0x400>; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_MP1_BCR>; + + status = "disabled"; + }; + usb_prim_qmpphy: phy@88e8000 { compatible = "qcom,sc8180x-qmp-usb3-dp-phy"; reg = <0 0x088e8000 0 0x3000>; @@ -2555,6 +2583,60 @@ }; }; + usb_mp_qmpphy0: phy@88eb000 { + compatible = "qcom,sc8180x-qmp-usb3-uni-phy"; + reg = <0 0x088eb000 0 0x1000>; + + clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, + <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "pipe"; + + resets = <&gcc GCC_USB3_UNIPHY_MP0_BCR>, + <&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>; + reset-names = "phy", "phy_phy"; + + power-domains = <&gcc USB30_MP_GDSC>; + + #clock-cells = <0>; + clock-output-names = "usb2_phy0_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_mp_qmpphy1: phy@88ec000 { + compatible = "qcom,sc8180x-qmp-usb3-uni-phy"; + reg = <0 0x088ec000 0 0x1000>; + + clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, + <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "pipe"; + + resets = <&gcc GCC_USB3_UNIPHY_MP1_BCR>, + <&gcc GCC_USB3UNIPHY_PHY_MP1_BCR>; + reset-names = "phy", "phy_phy"; + + power-domains = <&gcc USB30_MP_GDSC>; + + #clock-cells = <0>; + clock-output-names = "usb2_phy1_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + usb_sec_qmpphy: phy@88ee000 { compatible = "qcom,sc8180x-qmp-usb3-dp-phy"; reg = <0 0x088ed000 0 0x3000>; @@ -2622,17 +2704,89 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + usb_mp: usb@a4f8800 { + compatible = "qcom,sc8180x-dwc3-mp", "qcom,dwc3"; + reg = <0 0x0a4f8800 0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_MP_AXI_CLK>, + <&gcc GCC_USB30_MP_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_MP_AXI_CLK>, + <&gcc GCC_USB30_MP_SLEEP_CLK>, + <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; + + interconnects = <&aggre1_noc MASTER_USB3_2 0 &mc_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_2 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + assigned-clocks = <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MP_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 655 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 658 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 657 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 59 IRQ_TYPE_EDGE_BOTH>, + <&pdc 46 IRQ_TYPE_EDGE_BOTH>, + <&pdc 71 IRQ_TYPE_EDGE_BOTH>, + <&pdc 68 IRQ_TYPE_EDGE_BOTH>, + <&pdc 7 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event_1", "pwr_event_2", + "hs_phy_1", "hs_phy_2", + "dp_hs_phy_1", "dm_hs_phy_1", + "dp_hs_phy_2", "dm_hs_phy_2", + "ss_phy_1", "ss_phy_2"; + + power-domains = <&gcc USB30_MP_GDSC>; + + resets = <&gcc GCC_USB30_MP_BCR>; + + status = "disabled"; + + usb_mp_dwc3: usb@a400000 { + compatible = "snps,dwc3"; + reg = <0 0x0a400000 0 0xcd00>; + interrupts = <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x60 0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_mp_hsphy0>, + <&usb_mp_qmpphy0>, + <&usb_mp_hsphy1>, + <&usb_mp_qmpphy1>; + phy-names = "usb2-0", + "usb3-0", + "usb2-1", + "usb3-1"; + dr_mode = "host"; + }; + }; + usb_prim: usb@a6f8800 { compatible = "qcom,sc8180x-dwc3", "qcom,dwc3"; reg = <0 0x0a6f8800 0 0x400>; - interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 9 IRQ_TYPE_EDGE_BOTH>, <&pdc 8 IRQ_TYPE_EDGE_BOTH>, - <&pdc 9 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "hs_phy_irq", - "ss_phy_irq", + <&pdc 6 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", "dm_hs_phy_irq", - "dp_hs_phy_irq"; + "ss_phy_irq"; clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>, @@ -2714,12 +2868,17 @@ "xo"; resets = <&gcc GCC_USB30_SEC_BCR>; power-domains = <&gcc USB30_SEC_GDSC>; - interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 40 IRQ_TYPE_LEVEL_HIGH>, + + interrupts-extended = <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 11 IRQ_TYPE_EDGE_BOTH>, <&pdc 10 IRQ_TYPE_EDGE_BOTH>, - <&pdc 11 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "hs_phy_irq", "ss_phy_irq", - "dm_hs_phy_irq", "dp_hs_phy_irq"; + <&pdc 40 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, <&gcc GCC_USB30_SEC_MASTER_CLK>; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts index b98b2f7752b5..6020582b0a59 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts @@ -848,15 +848,15 @@ pins = "gpio143"; function = "gpio"; drive-strength = <2>; - bias-pull-down; + bias-disable; }; wake-n-pins { - pins = "gpio145"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; + pins = "gpio145"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; }; pcie3a_default: pcie3a-default-state { @@ -871,7 +871,7 @@ pins = "gpio151"; function = "gpio"; drive-strength = <2>; - bias-pull-down; + bias-disable; }; wake-n-pins { @@ -894,7 +894,7 @@ pins = "gpio141"; function = "gpio"; drive-strength = <2>; - bias-pull-down; + bias-disable; }; wake-n-pins { diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index b27143f81867..6a28cab97189 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -592,6 +592,57 @@ }; }; +&camss { + vdda-phy-supply = <&vreg_l6d>; + vdda-pll-supply = <&vreg_l4d>; + + status = "okay"; + + ports { + port@0 { + csiphy0_lanes01_ep: endpoint@0 { + reg = <0>; + clock-lanes = <7>; + data-lanes = <0 1>; + remote-endpoint = <&ov5675_ep>; + }; + }; + }; +}; + +&cci2 { + status = "okay"; +}; + +&cci2_i2c1 { + camera@10 { + compatible = "ovti,ov5675"; + reg = <0x10>; + + reset-gpios = <&tlmm 15 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&cam_rgb_default>; + + clocks = <&camcc CAMCC_MCLK3_CLK>; + + orientation = <0>; /* Front facing */ + + avdd-supply = <&vreg_l6q>; + dvdd-supply = <&vreg_l2q>; + dovdd-supply = <&vreg_l7q>; + + port { + ov5675_ep: endpoint { + clock-lanes = <0>; + data-lanes = <1 2>; + link-frequencies = /bits/ 64 <450000000>; + remote-endpoint = <&csiphy0_lanes01_ep>; + }; + }; + + }; +}; + &dispcc0 { status = "okay"; }; @@ -1436,6 +1487,22 @@ bias-disable; }; + cam_rgb_default: cam-rgb-default-state { + mclk-pins { + pins = "gpio17"; + function = "cam_mclk"; + drive-strength = <16>; + bias-disable; + }; + + sc-rgb-xshut-n-pins { + pins = "gpio15"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + edp_reg_en: edp-reg-en-state { pins = "gpio25"; function = "gpio"; @@ -1509,15 +1576,15 @@ pins = "gpio143"; function = "gpio"; drive-strength = <2>; - bias-pull-down; + bias-disable; }; wake-n-pins { - pins = "gpio145"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; + pins = "gpio145"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; }; pcie3a_default: pcie3a-default-state { @@ -1532,7 +1599,7 @@ pins = "gpio151"; function = "gpio"; drive-strength = <2>; - bias-pull-down; + bias-disable; }; wake-n-pins { @@ -1555,7 +1622,7 @@ pins = "gpio141"; function = "gpio"; drive-strength = <2>; - bias-pull-down; + bias-disable; }; wake-n-pins { diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index c7e3764a8cf3..c8da5cb8d04e 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -372,7 +372,7 @@ mboxes = <&apcs_glb 0>; rpm_requests: rpm-requests { - compatible = "qcom,rpm-sdm660"; + compatible = "qcom,rpm-sdm660", "qcom,glink-smd-rpm"; qcom,glink-channels = "rpm_requests"; rpmcc: clock-controller { diff --git a/arch/arm64/boot/dts/qcom/sdx75-idp.dts b/arch/arm64/boot/dts/qcom/sdx75-idp.dts index fde16308c7e2..f1bbe7ab01ab 100644 --- a/arch/arm64/boot/dts/qcom/sdx75-idp.dts +++ b/arch/arm64/boot/dts/qcom/sdx75-idp.dts @@ -282,6 +282,12 @@ status = "okay"; }; +&remoteproc_mpss { + firmware-name = "qcom/sdx75/modem.mbn", + "qcom/sdx75/modem_dtb.mbn"; + status = "okay"; +}; + &sdhc { cd-gpios = <&tlmm 103 GPIO_ACTIVE_LOW>; vmmc-supply = <®_2v95_vdd>; diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi index 9b93f6501d55..7cf3fcb469a8 100644 --- a/arch/arm64/boot/dts/qcom/sdx75.dtsi +++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi @@ -366,7 +366,12 @@ no-map; }; - qdss_mem: qdss@88800000 { + qdss_mem: qdss@88500000 { + reg = <0x0 0x88500000 0x0 0x300000>; + no-map; + }; + + qlink_logging_mem: qlink-logging@88800000 { reg = <0x0 0x88800000 0x0 0x300000>; no-map; }; @@ -377,8 +382,13 @@ no-map; }; - mpss_dsmharq_mem: mpss-dsmharq@88f00000 { - reg = <0x0 0x88f00000 0x0 0x5080000>; + mpss_dsm_mem_2: mpss-dsm-2@88f00000 { + reg = <0x0 0x88f00000 0x0 0x2500000>; + no-map; + }; + + mpss_dsm_mem: mpss-dsm@8b400000 { + reg = <0x0 0x8b400000 0x0 0x2b80000>; no-map; }; @@ -388,7 +398,7 @@ }; mpssadsp_mem: mpssadsp@8e000000 { - reg = <0x0 0x8e000000 0x0 0xf400000>; + reg = <0x0 0x8e000000 0x0 0xf100000>; no-map; }; @@ -881,6 +891,53 @@ reg = <0x0 0x01fc0000 0x0 0x30000>; }; + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,sdx75-mpss-pas"; + reg = <0 0x04080000 0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 250 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack", + "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_CX>, + <&rpmhpd RPMHPD_MSS>; + power-domain-names = "cx", + "mss"; + + memory-region = <&mpssadsp_mem>, <&q6_mpss_dtb_mem>, + <&mpss_dsm_mem>, <&mpss_dsm_mem_2>, + <&qlink_logging_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_modem_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_PING + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_PING>; + label = "mpss"; + qcom,remote-pid = <1>; + }; + }; + sdhc: mmc@8804000 { compatible = "qcom,sdx75-sdhci", "qcom,sdhci-msm-v5"; reg = <0x0 0x08804000 0x0 0x1000>; diff --git a/arch/arm64/boot/dts/qcom/sm4450.dtsi b/arch/arm64/boot/dts/qcom/sm4450.dtsi index 9c9919e78fbd..1e05cd00b635 100644 --- a/arch/arm64/boot/dts/qcom/sm4450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm4450.dtsi @@ -4,7 +4,10 @@ */ #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sm4450-camcc.h> +#include <dt-bindings/clock/qcom,sm4450-dispcc.h> #include <dt-bindings/clock/qcom,sm4450-gcc.h> +#include <dt-bindings/clock/qcom,sm4450-gpucc.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> @@ -422,6 +425,41 @@ #hwlock-cells = <1>; }; + gpucc: clock-controller@3d90000 { + compatible = "qcom,sm4450-gpucc"; + reg = <0x0 0x03d90000 0x0 0xa000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + camcc: clock-controller@ade0000 { + compatible = "qcom,sm4450-camcc"; + reg = <0x0 0x0ade0000 0x0 0x20000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_CAMERA_AHB_CLK>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,sm4450-dispcc"; + reg = <0x0 0x0af00000 0x0 0x20000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&gcc GCC_DISP_AHB_CLK>, + <&sleep_clk>, + <0>, + <0>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sm4450-pdc", "qcom,pdc"; reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>; diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts index 4a30024aa48f..f60d36c03b9b 100644 --- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts +++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts @@ -1,13 +1,16 @@ // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* - * Copyright (c) 2023, Dang Huynh <danct12@riseup.net> + * Copyright (c) 2023 - 2024, Dang Huynh <danct12@riseup.net> */ /dts-v1/; #include "sm6115.dtsi" #include "pm6125.dtsi" +#include "pmi632.dtsi" #include <dt-bindings/arm/qcom,ids.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/usb/pd.h> / { model = "F(x)tec Pro1X (QX1050)"; @@ -32,12 +35,48 @@ }; }; + disp_elvdd_supply: disp-elvdd-supply { + compatible = "regulator-fixed"; + regulator-name = "disp_elvdd_supply"; + }; + + disp_elvss_supply: disp-elvss-supply { + compatible = "regulator-fixed"; + regulator-name = "disp_elvss_supply"; + }; + + disp_vcc_supply: disp-vcc-supply { + compatible = "regulator-fixed"; + regulator-name = "disp_vcc_supply"; + }; + + disp_vci_supply: disp-vci-supply { + compatible = "regulator-fixed"; + regulator-name = "disp_vci_supply"; + }; + gpio-keys { compatible = "gpio-keys"; - pinctrl-0 = <&vol_up_n>; + pinctrl-0 = <&hall_sensor_n>, <&key_camera_n>, <&vol_up_n>; pinctrl-names = "default"; + hall-switch { + label = "Hall Switch"; + linux,input-type = <EV_SW>; + linux,code = <SW_KEYPAD_SLIDE>; + gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + debounce-interval = <90>; + wakeup-source; + }; + + key-camera { + label = "Camera Button"; + linux,code = <KEY_CAMERA>; + gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + }; + key-volume-up { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; @@ -47,11 +86,119 @@ wakeup-source; }; }; + + gpio-leds { + compatible = "gpio-leds"; + + capslock-led { + label = "green:capslock"; + function = LED_FUNCTION_CAPSLOCK; + color = <LED_COLOR_ID_GREEN>; + gpios = <&pca9534 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "kbd-capslock"; + default-state = "off"; + }; + }; + + ts_vdd_supply: ts-vdd-supply { + compatible = "regulator-fixed"; + regulator-name = "ts_vdd_supply"; + gpio = <&pca9534 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + ts_vddio_supply: ts-vddio-supply { + compatible = "regulator-fixed"; + regulator-name = "ts_vddio_supply"; + gpio = <&pca9534 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; }; -&dispcc { - /* HACK: disable until a panel driver is ready to retain simplefb */ - status = "disabled"; +&gpi_dma0 { + status = "okay"; +}; + +&gpu { + status = "okay"; + + zap-shader { + firmware-name = "qcom/sm6115/Fxtec/QX1050/a610_zap.mbn"; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + + status = "okay"; + + pca9534: gpio@21 { + compatible = "nxp,pca9534"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&i2c2 { + status = "okay"; + /* Clock frequency was not specified downstream, let's park it to 100 KHz */ + clock-frequency = <100000>; + + touchscreen@14 { + compatible = "goodix,gt9286"; + reg = <0x14>; + + interrupts-extended = <&tlmm 80 IRQ_TYPE_LEVEL_LOW>; + + irq-gpios = <&tlmm 80 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 71 GPIO_ACTIVE_HIGH>; + AVDD28-supply = <&ts_vdd_supply>; + VDDIO-supply = <&ts_vddio_supply>; + + pinctrl-0 = <&ts_int_n>, <&ts_rst_n>; + pinctrl-names = "default"; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&pm6125_l18a>; + status = "okay"; + + panel: panel@0 { + compatible = "boe,bf060y8m-aj0"; + reg = <0>; + + reset-gpios = <&tlmm 82 GPIO_ACTIVE_LOW>; + + elvdd-supply = <&disp_elvdd_supply>; + elvss-supply = <&disp_elvss_supply>; + vcc-supply = <&disp_vcc_supply>; + vci-supply = <&disp_vci_supply>; + vddio-supply = <&pm6125_l9a>; + + pinctrl-0 = <&mdss_dsi_n &panel_en_n>; + pinctrl-names = "default"; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&panel_in>; +}; + +&mdss_dsi0_phy { + status = "okay"; }; &pm6125_gpios { @@ -64,6 +211,73 @@ }; }; +&pmi632_lpg { + status = "okay"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_RED>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_BLUE>; + }; + }; +}; + +&pmi632_typec { + status = "okay"; + + connector { + compatible = "usb-c-connector"; + + power-role = "dual"; + data-role = "dual"; + self-powered; + + typec-power-opmode = "default"; + pd-disable; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + pmi632_hs_in: endpoint { + remote-endpoint = <&usb_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + pmi632_ss_in: endpoint { + remote-endpoint = <&usb_qmpphy_out>; + }; + }; + }; + }; +}; + +&pmi632_vbus { + regulator-min-microamp = <500000>; + regulator-max-microamp = <1000000>; + status = "okay"; +}; + &pon_pwrkey { status = "okay"; }; @@ -73,6 +287,25 @@ status = "okay"; }; +&qupv3_id_0 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sm6115/Fxtec/QX1050/adsp.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/sm6115/Fxtec/QX1050/cdsp.mbn"; + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/sm6115/Fxtec/QX1050/modem.mbn"; + status = "okay"; +}; + &rpm_requests { regulators-0 { compatible = "qcom,rpm-pm6125-regulators"; @@ -105,6 +338,7 @@ pm6125_l5a: l5 { regulator-min-microvolt = <1648000>; regulator-max-microvolt = <3056000>; + regulator-allow-set-load; }; pm6125_l6a: l6 { @@ -206,12 +440,84 @@ }; }; +&sdc2_state_off { + cd-pins { + pins = "gpio88"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&sdc2_state_on { + cd-pins { + pins = "gpio88"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_state_on>; + pinctrl-1 = <&sdc2_state_off>; + pinctrl-names = "default", "sleep"; + + cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>; + + vmmc-supply = <&pm6125_l22a>; + vqmmc-supply = <&pm6125_l5a>; + + status = "okay"; +}; + &sleep_clk { clock-frequency = <32764>; }; &tlmm { gpio-reserved-ranges = <0 4>, <14 4>; + + key_camera_n: key-camera-n-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + panel_en_n: panel-en-n-state { + pins = "gpio65"; + function = "gpio"; + bias-disable; + }; + + ts_rst_n: ts-rst-n-state { + pins = "gpio71"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + ts_int_n: ts-int-n-state { + pins = "gpio80"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + mdss_dsi_n: mdss-dsi-n-state { + pins = "gpio82"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + hall_sensor_n: hall-sensor-n-state { + pins = "gpio96"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; }; &ufs_mem_hc { @@ -233,10 +539,8 @@ status = "okay"; }; -&usb_dwc3 { - /delete-property/ usb-role-switch; - maximum-speed = "high-speed"; - dr_mode = "peripheral"; +&usb_dwc3_hs { + remote-endpoint = <&pmi632_hs_in>; }; &usb_hsphy { @@ -246,6 +550,27 @@ status = "okay"; }; +&usb_qmpphy { + vdda-phy-supply = <&pm6125_l4a>; + vdda-pll-supply = <&pm6125_l12a>; + status = "okay"; +}; + +&usb_qmpphy_out { + remote-endpoint = <&pmi632_ss_in>; +}; + +&wifi { + vdd-0.8-cx-mx-supply = <&pm6125_l8a>; + vdd-1.8-xo-supply = <&pm6125_l16a>; + vdd-1.3-rfa-supply = <&pm6125_l17a>; + vdd-3.3-ch0-supply = <&pm6125_l23a>; + + qcom,ath10k-calibration-variant = "Fxtec_QX1050"; + + status = "okay"; +}; + &xo_board { clock-frequency = <19200000>; }; diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi index e374733f3b85..41216cc319d6 100644 --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -376,7 +376,7 @@ mboxes = <&apcs_glb 0>; rpm_requests: rpm-requests { - compatible = "qcom,rpm-sm6115"; + compatible = "qcom,rpm-sm6115", "qcom,glink-smd-rpm"; qcom,glink-channels = "rpm_requests"; rpmcc: clock-controller { diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi index 777c380c2fa0..133610d14fc4 100644 --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi @@ -192,7 +192,7 @@ mboxes = <&apcs_glb 0>; rpm_requests: rpm-requests { - compatible = "qcom,rpm-sm6125"; + compatible = "qcom,rpm-sm6125", "qcom,glink-smd-rpm"; qcom,glink-channels = "rpm_requests"; rpmcc: clock-controller { diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi index ddea681b536d..4d519dd6e7ef 100644 --- a/arch/arm64/boot/dts/qcom/sm6375.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi @@ -653,7 +653,7 @@ mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; rpm_requests: rpm-requests { - compatible = "qcom,rpm-sm6375"; + compatible = "qcom,rpm-sm6375", "qcom,glink-smd-rpm"; qcom,glink-channels = "rpm_requests"; rpmcc: clock-controller { diff --git a/arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi index 29289fa41b13..b9cff60efe6f 100644 --- a/arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi @@ -411,6 +411,8 @@ }; &ufs_mem_hc { + reset-gpios = <&tlmm 119 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l19a_3p0>; vcc-max-microamp = <600000>; vccq2-supply = <&vreg_l12a_1p8>; diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts index 286350ac7751..256a1ba94945 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts @@ -355,11 +355,6 @@ }; &gpu { - /* - * NOTE: "amd,imageon" makes Adreno start in headless mode, remove it - * after display support is added on this board. - */ - compatible = "qcom,adreno-640.1", "qcom,adreno", "amd,imageon"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index 3e236adb9397..27f87835bc55 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -17,6 +17,7 @@ #include <dt-bindings/clock/qcom,videocc-sm8150.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sm8150.h> +#include <dt-bindings/clock/qcom,sm8150-camcc.h> #include <dt-bindings/thermal/thermal.h> / { @@ -3759,6 +3760,18 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + camcc: clock-controller@ad00000 { + compatible = "qcom,sm8150-camcc"; + reg = <0 0x0ad00000 0 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_CAMERA_AHB_CLK>; + power-domains = <&rpmhpd SM8150_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + mdss: display-subsystem@ae00000 { compatible = "qcom,sm8150-mdss"; reg = <0 0x0ae00000 0 0x1000>; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 9d6c97d1fd9d..630f4eff20bf 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -8,8 +8,6 @@ #include <dt-bindings/clock/qcom,gcc-sm8250.h> #include <dt-bindings/clock/qcom,gpucc-sm8250.h> #include <dt-bindings/clock/qcom,rpmh.h> -#include <dt-bindings/clock/qcom,sm8250-lpass-aoncc.h> -#include <dt-bindings/clock/qcom,sm8250-lpass-audiocc.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> @@ -2633,14 +2631,13 @@ wsamacro: codec@3240000 { compatible = "qcom,sm8250-lpass-wsa-macro"; reg = <0 0x03240000 0 0x1000>; - clocks = <&audiocc LPASS_CDC_WSA_MCLK>, - <&audiocc LPASS_CDC_WSA_NPL>, + clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, - <&aoncc LPASS_CDC_VA_MCLK>, <&vamacro>; - clock-names = "mclk", "npl", "macro", "dcodec", "va", "fsgen"; + clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; #clock-cells = <0>; clock-output-names = "mclk"; @@ -2674,20 +2671,10 @@ status = "disabled"; }; - audiocc: clock-controller@3300000 { - compatible = "qcom,sm8250-lpass-audiocc"; - reg = <0 0x03300000 0 0x30000>; - #clock-cells = <1>; - clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, - <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, - <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; - clock-names = "core", "audio", "bus"; - }; - vamacro: codec@3370000 { compatible = "qcom,sm8250-lpass-va-macro"; reg = <0 0x03370000 0 0x1000>; - clocks = <&aoncc LPASS_CDC_VA_MCLK>, + clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; @@ -2792,16 +2779,6 @@ #size-cells = <0>; }; - aoncc: clock-controller@3380000 { - compatible = "qcom,sm8250-lpass-aoncc"; - reg = <0 0x03380000 0 0x40000>; - #clock-cells = <1>; - clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, - <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, - <&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; - clock-names = "core", "audio", "bus"; - }; - lpass_tlmm: pinctrl@33c0000 { compatible = "qcom,sm8250-lpass-lpi-pinctrl"; reg = <0 0x033c0000 0x0 0x20000>, diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index 38ee0850c335..37a2aba0d4ca 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -2251,6 +2251,12 @@ resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; }; + refgen: regulator@88e7000 { + compatible = "qcom,sm8350-refgen-regulator", + "qcom,sm8250-refgen-regulator"; + reg = <0x0 0x088e7000 0x0 0x84>; + }; + usb_1_qmpphy: phy@88e8000 { compatible = "qcom,sm8350-qmp-usb3-dp-phy"; reg = <0 0x088e8000 0 0x3000>; @@ -2490,8 +2496,12 @@ reg-names = "mdss"; interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>, - <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>; - interconnect-names = "mdp0-mem", "mdp1-mem"; + <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "mdp0-mem", + "mdp1-mem", + "cpu-cfg"; power-domains = <&dispcc MDSS_GDSC>; resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; @@ -2706,6 +2716,7 @@ operating-points-v2 = <&dsi0_opp_table>; power-domains = <&rpmhpd RPMHPD_MMCX>; + refgen-supply = <&refgen>; phys = <&mdss_dsi0_phy>; @@ -2804,6 +2815,7 @@ operating-points-v2 = <&dsi1_opp_table>; power-domains = <&rpmhpd RPMHPD_MMCX>; + refgen-supply = <&refgen>; phys = <&mdss_dsi1_phy>; diff --git a/arch/arm64/boot/dts/qcom/sm8550-hdk.dts b/arch/arm64/boot/dts/qcom/sm8550-hdk.dts index 2e12219006c9..01c921602605 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-hdk.dts @@ -279,6 +279,65 @@ }; }; }; + + wcn7850-pmu { + compatible = "qcom,wcn7850-pmu"; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_en>, <&bt_default>, <&pmk8550_sleep_clk>; + + wlan-enable-gpios = <&tlmm 80 GPIO_ACTIVE_HIGH>; + bt-enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; + + vdd-supply = <&vreg_s5g_0p85>; + vddio-supply = <&vreg_l15b_1p8>; + vddaon-supply = <&vreg_s2g_0p85>; + vdddig-supply = <&vreg_s4e_0p95>; + vddrfa1p2-supply = <&vreg_s4g_1p25>; + vddrfa1p8-supply = <&vreg_s6g_1p86>; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p8: ldo7 { + regulator-name = "vreg_pmu_rfa_1p8"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + }; }; &apps_rsc { @@ -953,6 +1012,23 @@ status = "okay"; }; +&pcieport0 { + wifi@0 { + compatible = "pci17cb,1107"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + }; +}; + &pcie0_phy { vdda-phy-supply = <&vreg_l1e_0p88>; vdda-pll-supply = <&vreg_l3e_1p2>; @@ -1041,6 +1117,17 @@ status = "okay"; }; +&pmk8550_gpios { + pmk8550_sleep_clk: sleep-clk-state { + pins = "gpio3"; + function = "func1"; + input-disable; + output-enable; + bias-disable; + power-source = <0>; + }; +}; + &qupv3_id_0 { status = "okay"; }; @@ -1203,6 +1290,13 @@ bias-disable; output-low; }; + + wlan_en: wlan-en-state { + pins = "gpio80"; + function = "gpio"; + drive-strength = <8>; + bias-pull-down; + }; }; &uart7 { @@ -1215,20 +1309,15 @@ bluetooth { compatible = "qcom,wcn7850-bt"; - vddio-supply = <&vreg_l15b_1p8>; - vddaon-supply = <&vreg_s4e_0p95>; - vdddig-supply = <&vreg_s4e_0p95>; - vddrfa0p8-supply = <&vreg_s4e_0p95>; - vddrfa1p2-supply = <&vreg_s4g_1p25>; - vddrfa1p9-supply = <&vreg_s6g_1p86>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; max-speed = <3200000>; - - enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; - swctrl-gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>; - - pinctrl-0 = <&bt_default>; - pinctrl-names = "default"; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts index 774bdfcffec3..6052dd922ec5 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts @@ -219,13 +219,10 @@ compatible = "qcom,wcn7850-pmu"; pinctrl-names = "default"; - pinctrl-0 = <&wlan_en>, <&pmk8550_sleep_clk>; + pinctrl-0 = <&wlan_en>, <&bt_default>, <&pmk8550_sleep_clk>; wlan-enable-gpios = <&tlmm 80 GPIO_ACTIVE_HIGH>; - /* - * TODO Add bt-enable-gpios once the Bluetooth driver is - * converted to using the power sequencer. - */ + bt-enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; vdd-supply = <&vreg_s5g_0p85>; vddio-supply = <&vreg_l15b_1p8>; @@ -1175,20 +1172,15 @@ bluetooth { compatible = "qcom,wcn7850-bt"; - vddio-supply = <&vreg_l15b_1p8>; - vddaon-supply = <&vreg_s4e_0p95>; - vdddig-supply = <&vreg_s4e_0p95>; - vddrfa0p8-supply = <&vreg_s4e_0p95>; - vddrfa1p2-supply = <&vreg_s4g_1p25>; - vddrfa1p9-supply = <&vreg_s6g_1p86>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; max-speed = <3200000>; - - enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; - swctrl-gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>; - - pinctrl-0 = <&bt_default>; - pinctrl-names = "default"; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi index 4c9820adcf52..9dc0ee3eb98f 100644 --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi @@ -2747,6 +2747,98 @@ #power-domain-cells = <1>; }; + cci0: cci@ac15000 { + compatible = "qcom,sm8550-cci", "qcom,msm8996-cci"; + reg = <0 0x0ac15000 0 0x1000>; + interrupts = <GIC_SPI 426 IRQ_TYPE_EDGE_RISING>; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CCI_0_CLK>; + clock-names = "camnoc_axi", + "cpas_ahb", + "cci"; + pinctrl-0 = <&cci0_0_default &cci0_1_default>; + pinctrl-1 = <&cci0_0_sleep &cci0_1_sleep>; + pinctrl-names = "default", "sleep"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + + cci0_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci0_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cci1: cci@ac16000 { + compatible = "qcom,sm8550-cci", "qcom,msm8996-cci"; + reg = <0 0x0ac16000 0 0x1000>; + interrupts = <GIC_SPI 427 IRQ_TYPE_EDGE_RISING>; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CCI_1_CLK>; + clock-names = "camnoc_axi", + "cpas_ahb", + "cci"; + pinctrl-0 = <&cci1_0_default>; + pinctrl-1 = <&cci1_0_sleep>; + pinctrl-names = "default", "sleep"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + + cci1_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cci2: cci@ac17000 { + compatible = "qcom,sm8550-cci", "qcom,msm8996-cci"; + reg = <0 0x0ac17000 0 0x1000>; + interrupts = <GIC_SPI 428 IRQ_TYPE_EDGE_RISING>; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CCI_2_CLK>; + clock-names = "camnoc_axi", + "cpas_ahb", + "cci"; + pinctrl-0 = <&cci2_0_default &cci2_1_default>; + pinctrl-1 = <&cci2_0_sleep &cci2_1_sleep>; + pinctrl-names = "default", "sleep"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + + cci2_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci2_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + camcc: clock-controller@ade0000 { compatible = "qcom,sm8550-camcc"; reg = <0 0x0ade0000 0 0x20000>; @@ -3393,6 +3485,166 @@ gpio-ranges = <&tlmm 0 0 211>; wakeup-parent = <&pdc>; + cci0_0_default: cci0-0-default-state { + sda-pins { + pins = "gpio110"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + scl-pins { + pins = "gpio111"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + }; + + cci0_0_sleep: cci0-0-sleep-state { + sda-pins { + pins = "gpio110"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-down; + }; + + scl-pins { + pins = "gpio111"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cci0_1_default: cci0-1-default-state { + sda-pins { + pins = "gpio112"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + scl-pins { + pins = "gpio113"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + }; + + cci0_1_sleep: cci0-1-sleep-state { + sda-pins { + pins = "gpio112"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-down; + }; + + scl-pins { + pins = "gpio113"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cci1_0_default: cci1-0-default-state { + sda-pins { + pins = "gpio114"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + scl-pins { + pins = "gpio115"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + }; + + cci1_0_sleep: cci1-0-sleep-state { + sda-pins { + pins = "gpio114"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-down; + }; + + scl-pins { + pins = "gpio115"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cci2_0_default: cci2-0-default-state { + sda-pins { + pins = "gpio74"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + scl-pins { + pins = "gpio75"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + }; + + cci2_0_sleep: cci2-0-sleep-state { + sda-pins { + pins = "gpio74"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-down; + }; + + scl-pins { + pins = "gpio75"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cci2_1_default: cci2-1-default-state { + sda-pins { + pins = "gpio0"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + scl-pins { + pins = "gpio1"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + }; + + cci2_1_sleep: cci2-1-sleep-state { + sda-pins { + pins = "gpio0"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-down; + }; + + scl-pins { + pins = "gpio1"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-down; + }; + }; + hub_i2c0_data_clk: hub-i2c0-data-clk-state { /* SDA, SCL */ pins = "gpio16", "gpio17"; diff --git a/arch/arm64/boot/dts/qcom/sm8650-hdk.dts b/arch/arm64/boot/dts/qcom/sm8650-hdk.dts index 591e6ab9bf5b..127c7aacd4fc 100644 --- a/arch/arm64/boot/dts/qcom/sm8650-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8650-hdk.dts @@ -271,13 +271,10 @@ compatible = "qcom,wcn7850-pmu"; pinctrl-names = "default"; - pinctrl-0 = <&wlan_en>; + pinctrl-0 = <&wlan_en>, <&bt_default>; wlan-enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>; - /* - * TODO Add bt-enable-gpios once the Bluetooth driver is - * converted to using the power sequencer. - */ + bt-enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>; vdd-supply = <&vreg_s4i_0p85>; vddio-supply = <&vreg_l15b_1p8>; @@ -1272,20 +1269,15 @@ bluetooth { compatible = "qcom,wcn7850-bt"; - vddio-supply = <&vreg_l3c_1p2>; - vddaon-supply = <&vreg_l15b_1p8>; - vdddig-supply = <&vreg_s3c_0p9>; - vddrfa0p8-supply = <&vreg_s3c_0p9>; - vddrfa1p2-supply = <&vreg_s1c_1p2>; - vddrfa1p9-supply = <&vreg_s6c_1p8>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; max-speed = <3200000>; - - enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>; - swctrl-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>; - - pinctrl-0 = <&bt_default>; - pinctrl-names = "default"; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts index b0d7927b708f..8ca0d28eba9b 100644 --- a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts @@ -208,13 +208,10 @@ compatible = "qcom,wcn7850-pmu"; pinctrl-names = "default"; - pinctrl-0 = <&wlan_en>; + pinctrl-0 = <&wlan_en>, <&bt_default>; wlan-enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>; - /* - * TODO Add bt-enable-gpios once the Bluetooth driver is - * converted to using the power sequencer. - */ + bt-enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>; vdd-supply = <&vreg_s4i_0p85>; vddio-supply = <&vreg_l15b_1p8>; @@ -1255,22 +1252,15 @@ bluetooth { compatible = "qcom,wcn7850-bt"; - clocks = <&rpmhcc RPMH_RF_CLK1>; - - vddio-supply = <&vreg_l3c_1p2>; - vddaon-supply = <&vreg_l15b_1p8>; - vdddig-supply = <&vreg_s3c_0p9>; - vddrfa0p8-supply = <&vreg_s3c_0p9>; - vddrfa1p2-supply = <&vreg_s1c_1p2>; - vddrfa1p9-supply = <&vreg_s6c_1p8>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; max-speed = <3200000>; - - enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>; - swctrl-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>; - - pinctrl-0 = <&bt_default>; - pinctrl-names = "default"; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi index 9d9bbb9aca64..01ac3769ffa6 100644 --- a/arch/arm64/boot/dts/qcom/sm8650.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi @@ -3329,6 +3329,105 @@ #power-domain-cells = <1>; }; + cci0: cci@ac15000 { + compatible = "qcom,sm8650-cci", "qcom,msm8996-cci"; + reg = <0 0x0ac15000 0 0x1000>; + interrupts = <GIC_SPI 426 IRQ_TYPE_EDGE_RISING>; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + clocks = <&camcc CAM_CC_CAMNOC_AXI_NRT_CLK>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CCI_0_CLK>; + clock-names = "camnoc_axi", + "cpas_ahb", + "cci"; + pinctrl-0 = <&cci0_0_default &cci0_1_default>; + pinctrl-1 = <&cci0_0_sleep &cci0_1_sleep>; + pinctrl-names = "default", "sleep"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + + cci0_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci0_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cci1: cci@ac16000 { + compatible = "qcom,sm8650-cci", "qcom,msm8996-cci"; + reg = <0 0x0ac16000 0 0x1000>; + interrupts = <GIC_SPI 427 IRQ_TYPE_EDGE_RISING>; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + clocks = <&camcc CAM_CC_CAMNOC_AXI_NRT_CLK>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CCI_1_CLK>; + clock-names = "camnoc_axi", + "cpas_ahb", + "cci"; + pinctrl-0 = <&cci1_0_default &cci1_1_default>; + pinctrl-1 = <&cci1_0_sleep &cci1_1_sleep>; + pinctrl-names = "default", "sleep"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + + cci1_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci1_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cci2: cci@ac17000 { + compatible = "qcom,sm8650-cci", "qcom,msm8996-cci"; + reg = <0 0x0ac17000 0 0x1000>; + interrupts = <GIC_SPI 428 IRQ_TYPE_EDGE_RISING>; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + clocks = <&camcc CAM_CC_CAMNOC_AXI_NRT_CLK>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CCI_2_CLK>; + clock-names = "camnoc_axi", + "cpas_ahb", + "cci"; + pinctrl-0 = <&cci2_0_default &cci2_1_default>; + pinctrl-1 = <&cci2_0_sleep &cci2_1_sleep>; + pinctrl-names = "default", "sleep"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + + cci2_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci2_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + camcc: clock-controller@ade0000 { compatible = "qcom,sm8650-camcc"; reg = <0 0x0ade0000 0 0x20000>; @@ -4029,6 +4128,198 @@ wakeup-parent = <&pdc>; + cci0_0_default: cci0-0-default-state { + sda-pins { + pins = "gpio113"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + scl-pins { + pins = "gpio114"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + }; + + cci0_0_sleep: cci0-0-sleep-state { + sda-pins { + pins = "gpio113"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-down; + }; + + scl-pins { + pins = "gpio114"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cci0_1_default: cci0-1-default-state { + sda-pins { + pins = "gpio115"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + scl-pins { + pins = "gpio116"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + }; + + cci0_1_sleep: cci0-1-sleep-state { + sda-pins { + pins = "gpio115"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-down; + }; + + scl-pins { + pins = "gpio116"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cci1_0_default: cci1-0-default-state { + sda-pins { + pins = "gpio117"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + scl-pins { + pins = "gpio118"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + }; + + cci1_0_sleep: cci1-0-sleep-state { + sda-pins { + pins = "gpio117"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-down; + }; + + scl-pins { + pins = "gpio118"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cci1_1_default: cci1-1-default-state { + sda-pins { + pins = "gpio12"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + scl-pins { + pins = "gpio13"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + }; + + cci1_1_sleep: cci1-1-sleep-state { + sda-pins { + pins = "gpio12"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-down; + }; + + scl-pins { + pins = "gpio13"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cci2_0_default: cci2-0-default-state { + sda-pins { + pins = "gpio112"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + scl-pins { + pins = "gpio153"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + }; + + cci2_0_sleep: cci2-0-sleep-state { + sda-pins { + pins = "gpio112"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-down; + }; + + scl-pins { + pins = "gpio153"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cci2_1_default: cci2-1-default-state { + sda-pins { + pins = "gpio119"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + scl-pins { + pins = "gpio120"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + }; + + cci2_1_sleep: cci2-1-sleep-state { + sda-pins { + pins = "gpio119"; + function = "cci_i2c_sda"; + drive-strength = <2>; + bias-pull-down; + }; + + scl-pins { + pins = "gpio120"; + function = "cci_i2c_scl"; + drive-strength = <2>; + bias-pull-down; + }; + }; + hub_i2c0_data_clk: hub-i2c0-data-clk-state { /* SDA, SCL */ pins = "gpio64", "gpio65"; diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts new file mode 100644 index 000000000000..941dfddd6713 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts @@ -0,0 +1,807 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2024, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "x1e80100.dtsi" +#include "x1e80100-pmics.dtsi" + +/ { + model = "Lenovo ThinkPad T14s Gen 6"; + compatible = "lenovo,thinkpad-t14s", "qcom,x1e78100", "qcom,x1e80100"; + chassis-type = "laptop"; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&hall_int_n_default>; + pinctrl-names = "default"; + + switch-lid { + gpios = <&tlmm 92 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + wakeup-source; + wakeup-event-action = <EV_ACT_DEASSERTED>; + }; + }; + + pmic-glink { + compatible = "qcom,x1e80100-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>, + <&tlmm 123 GPIO_ACTIVE_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + /* Display-adjacent port */ + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss0_hs_in: endpoint { + remote-endpoint = <&usb_1_ss0_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss0_ss_in: endpoint { + remote-endpoint = <&usb_1_ss0_qmpphy_out>; + }; + }; + }; + }; + + /* User-adjacent port */ + connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss1_hs_in: endpoint { + remote-endpoint = <&usb_1_ss1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss1_ss_in: endpoint { + remote-endpoint = <&usb_1_ss1_qmpphy_out>; + }; + }; + }; + }; + }; + + reserved-memory { + linux,cma { + compatible = "shared-dma-pool"; + size = <0x0 0x8000000>; + reusable; + linux,cma-default; + }; + }; + + vreg_edp_3p3: regulator-edp-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_EDP_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&edp_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_nvme: regulator-nvme { + compatible = "regulator-fixed"; + + regulator-name = "VREG_NVME_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&nvme_reg_en>; + pinctrl-names = "default"; + }; + + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob2>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l12-supply = <&vreg_s5j_1p2>; + vdd-l15-supply = <&vreg_s4c_1p8>; + vdd-l17-supply = <&vreg_bob2>; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4b_1p8: ldo4 { + regulator-name = "vreg_l4b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_3p0: ldo8 { + regulator-name = "vreg_l8b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10b_1p8: ldo10 { + regulator-name = "vreg_l10b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_1p2: ldo12 { + regulator-name = "vreg_l12b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p0: ldo14 { + regulator-name = "vreg_l14b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s4c_1p8: smps4 { + regulator-name = "vreg_s4c_1p8"; + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1c_1p2: ldo1 { + regulator-name = "vreg_l1c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_0p8: ldo2 { + regulator-name = "vreg_l2c_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_0p8: ldo3 { + regulator-name = "vreg_l3c_0p8"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s4c_1p8>; + vdd-s1-supply = <&vph_pwr>; + + vreg_l1d_0p8: ldo1 { + regulator-name = "vreg_l1d_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2d_0p9: ldo2 { + regulator-name = "vreg_l2d_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3d_1p8: ldo3 { + regulator-name = "vreg_l3d_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-3 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s5j_1p2>; + + vreg_l2e_0p8: ldo2 { + regulator-name = "vreg_l2e_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s5j_1p2>; + vdd-s1-supply = <&vph_pwr>; + + vreg_s1f_0p7: smps1 { + regulator-name = "vreg_s1f_0p7"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-6 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "i"; + + vdd-l1-supply = <&vreg_s4c_1p8>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + + vreg_l1i_1p8: ldo1 { + regulator-name = "vreg_l1i_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2i_1p2: ldo2 { + regulator-name = "vreg_l2i_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3i_0p8: ldo3 { + regulator-name = "vreg_l3i_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-7 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "j"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s5-supply = <&vph_pwr>; + + vreg_s5j_1p2: smps5 { + regulator-name = "vreg_s5j_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1j_0p8: ldo1 { + regulator-name = "vreg_l1j_0p8"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2j_1p2: ldo2 { + regulator-name = "vreg_l2j_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1256000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3j_0p8: ldo3 { + regulator-name = "vreg_l3j_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&gpu { + status = "okay"; + + zap-shader { + firmware-name = "qcom/x1e80100/LENOVO/21N1/qcdxkmsuc8380.mbn"; + }; +}; + +&i2c0 { + clock-frequency = <400000>; + + status = "okay"; + + /* ELAN06E2 or ELAN06E3 */ + touchpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&tpad_default>; + pinctrl-names = "default"; + + wakeup-source; + }; + + /* TODO: second-sourced SYNA8022 or SYNA8024 touchpad @ 0x2c */ + + /* ELAN06F1 or SYNA06F2 */ + keyboard@3a { + compatible = "hid-over-i2c"; + reg = <0x3a>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&kybd_default>; + pinctrl-names = "default"; + + wakeup-source; + }; +}; + +&i2c8 { + clock-frequency = <400000>; + + status = "okay"; + + /* ILIT2911 or GTCH1563 */ + touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&ts0_default>; + pinctrl-names = "default"; + }; + + /* TODO: second-sourced touchscreen @ 0x41 */ +}; + +&mdss { + status = "okay"; +}; + +&mdss_dp3 { + compatible = "qcom,x1e80100-dp"; + /delete-property/ #sound-dai-cells; + + status = "okay"; + + aux-bus { + panel { + compatible = "edp-panel"; + enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>; + power-supply = <&vreg_edp_3p3>; + + pinctrl-0 = <&edp_bl_en>; + pinctrl-names = "default"; + + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss_dp3_out>; + }; + }; + }; + }; + + ports { + port@1 { + reg = <1>; + + mdss_dp3_out: endpoint { + data-lanes = <0 1 2 3>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + + remote-endpoint = <&edp_panel_in>; + }; + }; + }; +}; + +&mdss_dp3_phy { + vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&pcie4 { + perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie4_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie4_phy { + vdda-phy-supply = <&vreg_l3i_0p8>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&pcie6a { + perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_nvme>; + + pinctrl-0 = <&pcie6a_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie6a_phy { + vdda-phy-supply = <&vreg_l1d_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&pmc8380_3_gpios { + edp_bl_en: edp-bl-en-state { + pins = "gpio4"; + function = "normal"; + power-source = <1>; + input-disable; + output-enable; + }; +}; + +&qupv3_0 { + status = "okay"; +}; + +&qupv3_1 { + status = "okay"; +}; + +&qupv3_2 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/x1e80100/LENOVO/21N1/qcadsp8380.mbn", + "qcom/x1e80100/LENOVO/21N1/adsp_dtbs.elf"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/x1e80100/LENOVO/21N1/qccdsp8380.mbn", + "qcom/x1e80100/LENOVO/21N1/cdsp_dtbs.elf"; + + status = "okay"; +}; + +&smb2360_0_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l2b_3p0>; +}; + +&smb2360_1_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l14b_3p0>; +}; + +&tlmm { + gpio-reserved-ranges = <34 2>, /* Unused */ + <44 4>, /* SPI (TPM) */ + <72 2>, /* Secure EC I2C connection (?) */ + <238 1>; /* UFS Reset */ + + tpad_default: tpad-default-state { + pins = "gpio3"; + function = "gpio"; + bias-pull-up; + }; + + nvme_reg_en: nvme-reg-en-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + ts0_default: ts0-default-state { + reset-n-pins { + pins = "gpio48"; + function = "gpio"; + output-high; + drive-strength = <16>; + }; + + int-n-pins { + pins = "gpio51"; + function = "gpio"; + bias-disable; + }; + }; + + kybd_default: kybd-default-state { + pins = "gpio67"; + function = "gpio"; + bias-disable; + }; + + edp_reg_en: edp-reg-en-state { + pins = "gpio70"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + hall_int_n_default: hall-int-n-state { + pins = "gpio92"; + function = "gpio"; + bias-disable; + }; + + pcie4_default: pcie4-default-state { + clkreq-n-pins { + pins = "gpio147"; + function = "pcie4_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio146"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio148"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie6a_default: pcie6a-default-state { + clkreq-n-pins { + pins = "gpio153"; + function = "pcie6a_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio152"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio154"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + wcd_default: wcd-reset-n-active-state { + pins = "gpio191"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + +&usb_1_ss0_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + phys = <&smb2360_0_eusb2_repeater>; + + status = "okay"; +}; + +&usb_1_ss0_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l1j_0p8>; + + status = "okay"; +}; + +&usb_1_ss0 { + status = "okay"; +}; + +&usb_1_ss0_dwc3 { + dr_mode = "host"; +}; + +&usb_1_ss0_dwc3_hs { + remote-endpoint = <&pmic_glink_ss0_hs_in>; +}; + +&usb_1_ss0_qmpphy_out { + remote-endpoint = <&pmic_glink_ss0_ss_in>; +}; + +&usb_1_ss1_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + phys = <&smb2360_1_eusb2_repeater>; + + status = "okay"; +}; + +&usb_1_ss1_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + + status = "okay"; +}; + +&usb_1_ss1 { + status = "okay"; +}; + +&usb_1_ss1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_ss1_dwc3_hs { + remote-endpoint = <&pmic_glink_ss1_hs_in>; +}; + +&usb_1_ss1_qmpphy_out { + remote-endpoint = <&pmic_glink_ss1_ss_in>; +}; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts index 9caa14dda585..20616bd4aa6c 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts @@ -501,10 +501,6 @@ vdd3-supply = <&vreg_l14b_3p0>; }; -&smb2360_2 { - status = "disabled"; -}; - &tlmm { gpio-reserved-ranges = <34 2>, /* Unused */ <44 4>, /* SPI (TPM) */ diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts index e17ab8251e2a..10b28d870f08 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts @@ -6,6 +6,8 @@ /dts-v1/; #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "x1e80100.dtsi" @@ -49,6 +51,21 @@ stdout-path = "serial0:115200n8"; }; + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&hall_int_n_default>; + pinctrl-names = "default"; + + switch-lid { + gpios = <&tlmm 92 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + wakeup-source; + wakeup-event-action = <EV_ACT_DEASSERTED>; + }; + }; + pmic-glink { compatible = "qcom,x1e80100-pmic-glink", "qcom,sm8550-pmic-glink", @@ -284,6 +301,22 @@ pinctrl-names = "default"; pinctrl-0 = <&nvme_reg_en>; }; + + vreg_wwan: regulator-wwan { + compatible = "regulator-fixed"; + + regulator-name = "SDX_VPH_PWR"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 221 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&wwan_sw_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; }; &apps_rsc { @@ -783,6 +816,25 @@ status = "okay"; }; +&pcie5 { + perst-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_wwan>; + + pinctrl-0 = <&pcie5_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie5_phy { + vdda-phy-supply = <&vreg_l3i_0p8>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + &pcie6a { perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; @@ -848,6 +900,10 @@ vdd3-supply = <&vreg_l14b_3p0>; }; +&smb2360_2 { + status = "okay"; +}; + &smb2360_2_eusb2_repeater { vdd18-supply = <&vreg_l3d_1p8>; vdd3-supply = <&vreg_l8b_3p0>; @@ -868,6 +924,7 @@ sound-name-prefix = "WooferLeft"; vdd-1p8-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <1 2 3 7 10 13>; }; /* WSA8845, Left Tweeter */ @@ -879,6 +936,7 @@ sound-name-prefix = "TwitterLeft"; vdd-1p8-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <4 5 6 7 11 13>; }; }; @@ -919,6 +977,7 @@ sound-name-prefix = "WooferRight"; vdd-1p8-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <1 2 3 7 10 13>; }; /* WSA8845, Right Tweeter */ @@ -930,6 +989,7 @@ sound-name-prefix = "TwitterRight"; vdd-1p8-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <4 5 6 7 11 13>; }; }; @@ -945,6 +1005,12 @@ bias-disable; }; + hall_int_n_default: hall-int-n-state { + pins = "gpio92"; + function = "gpio"; + bias-disable; + }; + kybd_default: kybd-default-state { pins = "gpio67"; function = "gpio"; @@ -981,6 +1047,29 @@ }; }; + pcie5_default: pcie5-default-state { + clkreq-n-pins { + pins = "gpio150"; + function = "pcie5_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio149"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio151"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + pcie6a_default: pcie6a-default-state { clkreq-n-pins { pins = "gpio153"; @@ -1032,6 +1121,13 @@ bias-disable; output-low; }; + + wwan_sw_en: wwan-sw-en-state { + pins = "gpio221"; + function = "gpio"; + drive-strength = <4>; + bias-disable; + }; }; &uart21 { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts index 1943bdbfb8c0..3c13331a9ef4 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts @@ -190,7 +190,6 @@ pinctrl-0 = <&edp_reg_en>; pinctrl-names = "default"; - regulator-always-on; regulator-boot-on; }; @@ -592,9 +591,13 @@ aux-bus { panel { - compatible = "edp-panel"; + compatible = "samsung,atna45dc02", "samsung,atna33xc20"; + enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>; power-supply = <&vreg_edp_3p3>; + pinctrl-0 = <&edp_bl_en>; + pinctrl-names = "default"; + port { edp_panel_in: endpoint { remote-endpoint = <&mdss_dp3_out>; @@ -669,6 +672,16 @@ status = "okay"; }; +&pmc8380_3_gpios { + edp_bl_en: edp-bl-en-state { + pins = "gpio4"; + function = "normal"; + power-source = <0>; + input-disable; + output-enable; + }; +}; + &qupv3_0 { status = "okay"; }; @@ -704,6 +717,10 @@ vdd3-supply = <&vreg_l14b_3p0>; }; +&smb2360_2 { + status = "okay"; +}; + &smb2360_2_eusb2_repeater { vdd18-supply = <&vreg_l3d_1p8>; vdd3-supply = <&vreg_l8b_3p0>; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi b/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi new file mode 100644 index 000000000000..42e02ad6a9c3 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi @@ -0,0 +1,835 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "x1e80100.dtsi" +#include "x1e80100-pmics.dtsi" + +/ { + aliases { + serial0 = &uart2; + i2c0 = &i2c0; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c7 = &i2c7; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pmk8550_pwm 0 5000000>; + enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>; + /* TODO: power-supply? */ + + pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>; + pinctrl-names = "default"; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-names = "default"; + pinctrl-0 = <&cam_indicator_en>; + + led-camera-indicator { + label = "white:camera-indicator"; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_WHITE>; + gpios = <&tlmm 225 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + /* Reuse as a panic indicator until we get a "camera on" trigger */ + panic-indicator; + }; + }; + + pmic-glink { + compatible = "qcom,x1e80100-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>, + <&tlmm 123 GPIO_ACTIVE_HIGH>; + + /* Left-side rear port */ + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss0_hs_in: endpoint { + remote-endpoint = <&usb_1_ss0_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss0_ss_in: endpoint { + remote-endpoint = <&usb_1_ss0_qmpphy_out>; + }; + }; + }; + }; + + /* Left-side front port */ + connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss1_hs_in: endpoint { + remote-endpoint = <&usb_1_ss1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss1_ss_in: endpoint { + remote-endpoint = <&usb_1_ss1_qmpphy_out>; + }; + }; + }; + }; + }; + + reserved-memory { + linux,cma { + compatible = "shared-dma-pool"; + size = <0x0 0x8000000>; + reusable; + linux,cma-default; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; + + vreg_edp_3p3: regulator-edp-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_EDP_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&edp_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_nvme: regulator-nvme { + compatible = "regulator-fixed"; + + regulator-name = "VREG_NVME_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&nvme_reg_en>; + pinctrl-names = "default"; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l1-l4-l10-supply = <&vreg_s4c>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob2>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l12-supply = <&vreg_s5j>; + vdd-l15-supply = <&vreg_s4c>; + vdd-l17-supply = <&vreg_bob2>; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1b: ldo1 { + regulator-name = "vreg_l1b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b: ldo2 { + regulator-name = "vreg_l2b"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4b: ldo4 { + regulator-name = "vreg_l4b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b: ldo5 { + regulator-name = "vreg_l5b"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b: ldo6 { + regulator-name = "vreg_l6b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b: ldo7 { + regulator-name = "vreg_l7b"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b: ldo8 { + regulator-name = "vreg_l8b"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b: ldo9 { + regulator-name = "vreg_l9b"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10b: ldo10 { + regulator-name = "vreg_l10b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b: ldo12 { + regulator-name = "vreg_l12b"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b: ldo13 { + regulator-name = "vreg_l13b"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b: ldo14 { + regulator-name = "vreg_l14b"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b: ldo15 { + regulator-name = "vreg_l15b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16b: ldo16 { + regulator-name = "vreg_l16b"; + regulator-min-microvolt = <2912000>; + regulator-max-microvolt = <2912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b: ldo17 { + regulator-name = "vreg_l17b"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-l1-supply = <&vreg_s5j>; + vdd-l2-supply = <&vreg_s1f>; + vdd-l3-supply = <&vreg_s1f>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s4c: smps4 { + regulator-name = "vreg_s4c"; + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1c: ldo1 { + regulator-name = "vreg_l1c"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c: ldo2 { + regulator-name = "vreg_l2c"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c: ldo3 { + regulator-name = "vreg_l3c"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-supply = <&vreg_s1f>; + vdd-l2-supply = <&vreg_s1f>; + vdd-l3-supply = <&vreg_s4c>; + vdd-s1-supply = <&vph_pwr>; + + vreg_l1d: ldo1 { + regulator-name = "vreg_l1d"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2d: ldo2 { + regulator-name = "vreg_l2d"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3d: ldo3 { + regulator-name = "vreg_l3d"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-3 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-l2-supply = <&vreg_s1f>; + vdd-l3-supply = <&vreg_s5j>; + + vreg_l2e: ldo2 { + regulator-name = "vreg_l2e"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3e: ldo3 { + regulator-name = "vreg_l3e"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-l1-supply = <&vreg_s5j>; + vdd-l2-supply = <&vreg_s5j>; + vdd-l3-supply = <&vreg_s5j>; + vdd-s1-supply = <&vph_pwr>; + + vreg_s1f: smps1 { + regulator-name = "vreg_s1f"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1f: ldo1 { + regulator-name = "vreg_l1f"; + regulator-min-microvolt = <1024000>; + regulator-max-microvolt = <1024000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2f: ldo2 { + regulator-name = "vreg_l2f"; + regulator-min-microvolt = <1024000>; + regulator-max-microvolt = <1024000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3f: ldo3 { + regulator-name = "vreg_l3f"; + regulator-min-microvolt = <1024000>; + regulator-max-microvolt = <1024000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-6 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "i"; + + vdd-l1-supply = <&vreg_s4c>; + vdd-l2-supply = <&vreg_s5j>; + vdd-l3-supply = <&vreg_s1f>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + + vreg_s1i: smps1 { + regulator-name = "vreg_s1i"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2i: smps2 { + regulator-name = "vreg_s2i"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1i: ldo1 { + regulator-name = "vreg_l1i"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2i: ldo2 { + regulator-name = "vreg_l2i"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3i: ldo3 { + regulator-name = "vreg_l3i"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-7 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "j"; + + vdd-l1-supply = <&vreg_s1f>; + vdd-l2-supply = <&vreg_s5j>; + vdd-l3-supply = <&vreg_s1f>; + vdd-s5-supply = <&vph_pwr>; + + vreg_s5j: smps5 { + regulator-name = "vreg_s5j"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1j: ldo1 { + regulator-name = "vreg_l1j"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2j: ldo2 { + regulator-name = "vreg_l2j"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1256000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3j: ldo3 { + regulator-name = "vreg_l3j"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_microcode_mem>; + firmware-name = "qcom/x1e80100/microsoft/qcdxkmsuc8380.mbn"; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + + status = "okay"; + + /* Something @39, @3e, @44 */ +}; + +&i2c3 { + clock-frequency = <400000>; + + status = "okay"; + + /* PS8830 USB retimer @8 */ +}; + +&i2c4 { + clock-frequency = <400000>; + + status = "okay"; + + /* Something @18, @2c, @2e */ +}; + +&i2c5 { + clock-frequency = <400000>; + + status = "okay"; + + /* Something @4f */ +}; + +&i2c7 { + clock-frequency = <400000>; + + status = "okay"; + + /* PS8830 USB retimer @8 */ +}; + + +&mdss { + status = "okay"; +}; + +&mdss_dp3 { + compatible = "qcom,x1e80100-dp"; + /delete-property/ #sound-dai-cells; + + status = "okay"; + + aux-bus { + panel { + compatible = "edp-panel"; + + backlight = <&backlight>; + power-supply = <&vreg_edp_3p3>; + + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss_dp3_out>; + }; + }; + }; + }; + + ports { + port@1 { + reg = <1>; + + mdss_dp3_out: endpoint { + data-lanes = <0 1 2 3>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + + remote-endpoint = <&edp_panel_in>; + }; + }; + }; +}; + +&mdss_dp3_phy { + vdda-phy-supply = <&vreg_l3j>; + vdda-pll-supply = <&vreg_l2j>; + + status = "okay"; +}; + +&pcie4 { + status = "okay"; +}; + +&pcie4_phy { + vdda-phy-supply = <&vreg_l3i>; + vdda-pll-supply = <&vreg_l3e>; + + status = "okay"; +}; + +&pcie6a { + perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_nvme>; + + pinctrl-0 = <&pcie6a_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie6a_phy { + vdda-phy-supply = <&vreg_l1d>; + vdda-pll-supply = <&vreg_l2j>; + + status = "okay"; +}; + +&pmc8380_3_gpios { + edp_bl_en: edp-bl-en-state { + pins = "gpio4"; + function = "normal"; + power-source = <1>; /* 1.8V */ + input-disable; + output-enable; + }; +}; + +&pmk8550_pwm { + status = "okay"; +}; + +&pmk8550_gpios { + edp_bl_pwm: edp-bl-pwm-state { + pins = "gpio5"; + function = "func3"; + }; +}; + +&qupv3_0 { + status = "okay"; +}; + +&qupv3_1 { + status = "okay"; +}; + +&qupv3_2 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/x1e80100/microsoft/Romulus/qcadsp8380.mbn", + "qcom/x1e80100/microsoft/Romulus/adsp_dtb.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/x1e80100/microsoft/Romulus/qccdsp8380.mbn", + "qcom/x1e80100/microsoft/Romulus/cdsp_dtb.mbn"; + + status = "okay"; +}; + +&smb2360_0_eusb2_repeater { + vdd18-supply = <&vreg_l3d>; + vdd3-supply = <&vreg_l2b>; +}; + +&smb2360_1_eusb2_repeater { + vdd18-supply = <&vreg_l3d>; + vdd3-supply = <&vreg_l14b>; +}; + +&tlmm { + gpio-reserved-ranges = <44 4>, /* SPI (TPM) */ + <238 1>; /* UFS Reset */ + + nvme_reg_en: nvme-reg-en-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + edp_reg_en: edp-reg-en-state { + pins = "gpio70"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + ssam_state: ssam-state-state { + pins = "gpio91"; + function = "gpio"; + bias-disable; + }; + + pcie6a_default: pcie6a-default-state { + perst-n-pins { + pins = "gpio152"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + clkreq-n-pins { + pins = "gpio153"; + function = "pcie6a_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-n-pins { + pins = "gpio154"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + cam_indicator_en: cam-indicator-en-state { + pins = "gpio225"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&uart2 { + status = "okay"; + + embedded-controller { + compatible = "microsoft,surface-sam"; + + interrupts-extended = <&tlmm 91 IRQ_TYPE_EDGE_RISING>; + + current-speed = <4000000>; + + pinctrl-0 = <&ssam_state>; + pinctrl-names = "default"; + }; +}; + +&usb_1_ss0_hsphy { + vdd-supply = <&vreg_l3j>; + vdda12-supply = <&vreg_l2j>; + + phys = <&smb2360_0_eusb2_repeater>; + + status = "okay"; +}; + +&usb_1_ss0_qmpphy { + vdda-phy-supply = <&vreg_l3e>; + vdda-pll-supply = <&vreg_l1j>; + + status = "okay"; +}; + +&usb_1_ss0 { + status = "okay"; +}; + +&usb_1_ss0_dwc3 { + dr_mode = "host"; +}; + +&usb_1_ss0_dwc3_hs { + remote-endpoint = <&pmic_glink_ss0_hs_in>; +}; + +&usb_1_ss0_qmpphy_out { + remote-endpoint = <&pmic_glink_ss0_ss_in>; +}; + +&usb_1_ss1_hsphy { + vdd-supply = <&vreg_l3j>; + vdda12-supply = <&vreg_l2j>; + + phys = <&smb2360_1_eusb2_repeater>; + + status = "okay"; +}; + +&usb_1_ss1_qmpphy { + vdda-phy-supply = <&vreg_l3e>; + vdda-pll-supply = <&vreg_l2d>; + + status = "okay"; +}; + +&usb_1_ss1 { + status = "okay"; +}; + +&usb_1_ss1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_ss1_dwc3_hs { + remote-endpoint = <&pmic_glink_ss1_hs_in>; +}; + +&usb_1_ss1_qmpphy_out { + remote-endpoint = <&pmic_glink_ss1_ss_in>; +}; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus13.dts b/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus13.dts new file mode 100644 index 000000000000..eb7580dd9684 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus13.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "x1e80100-microsoft-romulus.dtsi" + +/ { + model = "Microsoft Surface Laptop 7 (13.8 inch)"; + compatible = "microsoft,romulus13", "qcom,x1e80100"; +}; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus15.dts b/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus15.dts new file mode 100644 index 000000000000..4751ad9b510b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus15.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "x1e80100-microsoft-romulus.dtsi" + +/ { + model = "Microsoft Surface Laptop 7 (15 inch)"; + compatible = "microsoft,romulus15", "qcom,x1e80100"; +}; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi b/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi index e34e70922cd3..5b54ee79f048 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi @@ -249,6 +249,14 @@ interrupt-controller; #interrupt-cells = <2>; }; + + pmk8550_pwm: pwm { + compatible = "qcom,pmk8550-pwm"; + + #pwm-cells = <2>; + + status = "disabled"; + }; }; /* PMC8380C */ @@ -509,6 +517,8 @@ #address-cells = <1>; #size-cells = <0>; + status = "disabled"; + smb2360_2_eusb2_repeater: phy@fd00 { compatible = "qcom,smb2360-eusb2-repeater"; reg = <0xfd00>; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts index 8098e6730ae5..1c3a6a7b3ed6 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts @@ -729,10 +729,6 @@ status = "okay"; }; -&smb2360_3 { - status = "okay"; -}; - &smb2360_0_eusb2_repeater { vdd18-supply = <&vreg_l3d_1p8>; vdd3-supply = <&vreg_l2b_3p0>; @@ -743,11 +739,19 @@ vdd3-supply = <&vreg_l14b_3p0>; }; +&smb2360_2 { + status = "okay"; +}; + &smb2360_2_eusb2_repeater { vdd18-supply = <&vreg_l3d_1p8>; vdd3-supply = <&vreg_l8b_3p0>; }; +&smb2360_3 { + status = "okay"; +}; + &swr0 { pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>; pinctrl-names = "default"; @@ -763,6 +767,7 @@ sound-name-prefix = "SpkrLeft"; vdd-1p8-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <1 2 3 7 10 13>; }; /* WSA8845, Right Speaker */ @@ -774,6 +779,7 @@ sound-name-prefix = "SpkrRight"; vdd-1p8-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <4 5 6 7 11 13>; }; }; diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi index cd732ef88cd8..a36076e3c56b 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi @@ -4,6 +4,7 @@ */ #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h> #include <dt-bindings/clock/qcom,x1e80100-dispcc.h> #include <dt-bindings/clock/qcom,x1e80100-gcc.h> #include <dt-bindings/clock/qcom,x1e80100-gpucc.h> @@ -745,7 +746,7 @@ <&sleep_clk>, <0>, <&pcie4_phy>, - <0>, + <&pcie5_phy>, <&pcie6a_phy>, <0>, <&usb_1_ss0_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, @@ -1979,7 +1980,7 @@ i2c0: i2c@b80000 { compatible = "qcom,geni-i2c"; - reg = <0 0xb80000 0 0x4000>; + reg = <0 0x00b80000 0 0x4000>; interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; @@ -2142,9 +2143,31 @@ status = "disabled"; }; + uart2: serial@b88000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00b88000 0 0x4000>; + + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&qup_uart2_default>; + pinctrl-names = "default"; + + status = "disabled"; + }; + spi2: spi@b88000 { compatible = "qcom,geni-spi"; - reg = <0 0xb88000 0 0x4000>; + reg = <0 0x00b88000 0 0x4000>; interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; @@ -2243,7 +2266,7 @@ i2c4: i2c@b90000 { compatible = "qcom,geni-i2c"; - reg = <0 0xb90000 0 0x4000>; + reg = <0 0x00b90000 0 0x4000>; interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; @@ -2603,6 +2626,8 @@ #clock-cells = <1>; #phy-cells = <1>; + orientation-switch; + status = "disabled"; ports { @@ -2671,6 +2696,8 @@ #clock-cells = <1>; #phy-cells = <1>; + orientation-switch; + status = "disabled"; ports { @@ -2739,6 +2766,8 @@ #clock-cells = <1>; #phy-cells = <1>; + orientation-switch; + status = "disabled"; ports { @@ -2772,7 +2801,7 @@ cnoc_main: interconnect@1500000 { compatible = "qcom,x1e80100-cnoc-main"; - reg = <0 0x1500000 0 0x14400>; + reg = <0 0x01500000 0 0x14400>; qcom,bcm-voters = <&apps_bcm_voter>; @@ -2781,7 +2810,7 @@ config_noc: interconnect@1600000 { compatible = "qcom,x1e80100-cnoc-cfg"; - reg = <0 0x1600000 0 0x6600>; + reg = <0 0x01600000 0 0x6600>; qcom,bcm-voters = <&apps_bcm_voter>; @@ -2790,7 +2819,7 @@ system_noc: interconnect@1680000 { compatible = "qcom,x1e80100-system-noc"; - reg = <0 0x1680000 0 0x1c080>; + reg = <0 0x01680000 0 0x1c080>; qcom,bcm-voters = <&apps_bcm_voter>; @@ -2799,7 +2828,7 @@ pcie_south_anoc: interconnect@16c0000 { compatible = "qcom,x1e80100-pcie-south-anoc"; - reg = <0 0x16c0000 0 0xd080>; + reg = <0 0x016c0000 0 0xd080>; qcom,bcm-voters = <&apps_bcm_voter>; @@ -2808,7 +2837,7 @@ pcie_center_anoc: interconnect@16d0000 { compatible = "qcom,x1e80100-pcie-center-anoc"; - reg = <0 0x16d0000 0 0x7000>; + reg = <0 0x016d0000 0 0x7000>; qcom,bcm-voters = <&apps_bcm_voter>; @@ -2817,7 +2846,7 @@ aggre1_noc: interconnect@16e0000 { compatible = "qcom,x1e80100-aggre1-noc"; - reg = <0 0x16E0000 0 0x14400>; + reg = <0 0x016e0000 0 0x14400>; qcom,bcm-voters = <&apps_bcm_voter>; @@ -2826,7 +2855,7 @@ aggre2_noc: interconnect@1700000 { compatible = "qcom,x1e80100-aggre2-noc"; - reg = <0 0x1700000 0 0x1c400>; + reg = <0 0x01700000 0 0x1c400>; qcom,bcm-voters = <&apps_bcm_voter>; @@ -2835,7 +2864,7 @@ pcie_north_anoc: interconnect@1740000 { compatible = "qcom,x1e80100-pcie-north-anoc"; - reg = <0 0x1740000 0 0x9080>; + reg = <0 0x01740000 0 0x9080>; qcom,bcm-voters = <&apps_bcm_voter>; @@ -2844,7 +2873,7 @@ usb_center_anoc: interconnect@1750000 { compatible = "qcom,x1e80100-usb-center-anoc"; - reg = <0 0x1750000 0 0x8800>; + reg = <0 0x01750000 0 0x8800>; qcom,bcm-voters = <&apps_bcm_voter>; @@ -2853,7 +2882,7 @@ usb_north_anoc: interconnect@1760000 { compatible = "qcom,x1e80100-usb-north-anoc"; - reg = <0 0x1760000 0 0x7080>; + reg = <0 0x01760000 0 0x7080>; qcom,bcm-voters = <&apps_bcm_voter>; @@ -2862,7 +2891,7 @@ usb_south_anoc: interconnect@1770000 { compatible = "qcom,x1e80100-usb-south-anoc"; - reg = <0 0x1770000 0 0xf080>; + reg = <0 0x01770000 0 0xf080>; qcom,bcm-voters = <&apps_bcm_voter>; @@ -2871,7 +2900,7 @@ mmss_noc: interconnect@1780000 { compatible = "qcom,x1e80100-mmss-noc"; - reg = <0 0x1780000 0 0x5B800>; + reg = <0 0x01780000 0 0x5B800>; qcom,bcm-voters = <&apps_bcm_voter>; @@ -3000,6 +3029,126 @@ status = "disabled"; }; + pcie5: pci@1c00000 { + device_type = "pci"; + compatible = "qcom,pcie-x1e80100"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x7e000000 0 0xf1d>, + <0 0x7e000f40 0 0xa8>, + <0 0x7e001000 0 0x1000>, + <0 0x7e100000 0 0x100000>, + <0 0x01c03000 0 0x1000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config", + "mhi"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x7e200000 0x0 0x100000>, + <0x02000000 0x0 0x7e300000 0x0 0x7e300000 0x0 0x1d00000>; + bus-range = <0x00 0xff>; + + dma-coherent; + + linux,pci-domain = <5>; + num-lanes = <2>; + + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 70 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 0 71 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 0 72 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 0 73 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_5_AUX_CLK>, + <&gcc GCC_PCIE_5_CFG_AHB_CLK>, + <&gcc GCC_PCIE_5_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_5_SLV_AXI_CLK>, + <&gcc GCC_PCIE_5_SLV_Q2A_AXI_CLK>, + <&gcc GCC_CFG_NOC_PCIE_ANOC_NORTH_AHB_CLK>, + <&gcc GCC_CNOC_PCIE_NORTH_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "noc_aggr", + "cnoc_sf_axi"; + + assigned-clocks = <&gcc GCC_PCIE_5_AUX_CLK>; + assigned-clock-rates = <19200000>; + + interconnects = <&pcie_south_anoc MASTER_PCIE_5 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &cnoc_main SLAVE_PCIE_5 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "pcie-mem", + "cpu-pcie"; + + resets = <&gcc GCC_PCIE_5_BCR>, + <&gcc GCC_PCIE_5_LINK_DOWN_BCR>; + reset-names = "pci", + "link_down"; + + power-domains = <&gcc GCC_PCIE_5_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + phys = <&pcie5_phy>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie5_phy: phy@1c06000 { + compatible = "qcom,x1e80100-qmp-gen3x2-pcie-phy"; + reg = <0 0x01c06000 0 0x2000>; + + clocks = <&gcc GCC_PCIE_5_AUX_CLK>, + <&gcc GCC_PCIE_5_CFG_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_PCIE_5_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_5_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "rchng", + "pipe"; + + resets = <&gcc GCC_PCIE_5_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE_5_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + power-domains = <&gcc GCC_PCIE_5_PHY_GDSC>; + + #clock-cells = <0>; + clock-output-names = "pcie5_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + pcie4: pci@1c08000 { device_type = "pci"; compatible = "qcom,pcie-x1e80100"; @@ -3350,7 +3499,7 @@ nsp_noc: interconnect@320c0000 { compatible = "qcom,x1e80100-nsp-noc"; - reg = <0 0x320C0000 0 0xE080>; + reg = <0 0x320C0000 0 0xe080>; qcom,bcm-voters = <&apps_bcm_voter>; @@ -3385,6 +3534,8 @@ pinctrl-0 = <&wsa2_swr_active>; pinctrl-names = "default"; + resets = <&lpass_audiocc LPASS_AUDIO_SWR_WSA2_CGCR>; + reset-names = "swr_audio_cgcr"; qcom,din-ports = <4>; qcom,dout-ports = <9>; @@ -3433,6 +3584,8 @@ pinctrl-0 = <&rx_swr_active>; pinctrl-names = "default"; + resets = <&lpass_audiocc LPASS_AUDIO_SWR_RX_CGCR>; + reset-names = "swr_audio_cgcr"; qcom,din-ports = <1>; qcom,dout-ports = <11>; @@ -3497,6 +3650,8 @@ pinctrl-0 = <&wsa_swr_active>; pinctrl-names = "default"; + resets = <&lpass_audiocc LPASS_AUDIO_SWR_WSA_CGCR>; + reset-names = "swr_audio_cgcr"; qcom,din-ports = <4>; qcom,dout-ports = <9>; @@ -3517,6 +3672,13 @@ status = "disabled"; }; + lpass_audiocc: clock-controller@6b6c000 { + compatible = "qcom,x1e80100-lpassaudiocc", "qcom,sc8280xp-lpassaudiocc"; + reg = <0 0x06b6c000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + swr2: soundwire@6d30000 { compatible = "qcom,soundwire-v2.0.0"; reg = <0 0x06d30000 0 0x10000>; @@ -3526,6 +3688,8 @@ <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "core", "wakeup"; label = "TX"; + resets = <&lpasscc LPASS_AUDIO_SWR_TX_CGCR>; + reset-names = "swr_audio_cgcr"; pinctrl-0 = <&tx_swr_active>; pinctrl-names = "default"; @@ -3682,9 +3846,16 @@ }; }; + lpasscc: clock-controller@6ea0000 { + compatible = "qcom,x1e80100-lpasscc", "qcom,sc8280xp-lpasscc"; + reg = <0 0x06ea0000 0 0x12000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + lpass_ag_noc: interconnect@7e40000 { compatible = "qcom,x1e80100-lpass-ag-noc"; - reg = <0 0x7e40000 0 0xE080>; + reg = <0 0x07e40000 0 0xe080>; qcom,bcm-voters = <&apps_bcm_voter>; @@ -3693,7 +3864,7 @@ lpass_lpiaon_noc: interconnect@7400000 { compatible = "qcom,x1e80100-lpass-lpiaon-noc"; - reg = <0 0x7400000 0 0x19080>; + reg = <0 0x07400000 0 0x19080>; qcom,bcm-voters = <&apps_bcm_voter>; @@ -3702,7 +3873,7 @@ lpass_lpicx_noc: interconnect@7430000 { compatible = "qcom,x1e80100-lpass-lpicx-noc"; - reg = <0 0x7430000 0 0x3A200>; + reg = <0 0x07430000 0 0x3A200>; qcom,bcm-voters = <&apps_bcm_voter>; @@ -3723,6 +3894,90 @@ status = "disabled"; }; + usb_mp_hsphy0: phy@88e1000 { + compatible = "qcom,x1e80100-snps-eusb2-phy", + "qcom,sm8550-snps-eusb2-phy"; + reg = <0 0x088e1000 0 0x154>; + #phy-cells = <0>; + + clocks = <&tcsr TCSR_USB3_MP0_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_HS0_MP_BCR>; + + status = "disabled"; + }; + + usb_mp_hsphy1: phy@88e2000 { + compatible = "qcom,x1e80100-snps-eusb2-phy", + "qcom,sm8550-snps-eusb2-phy"; + reg = <0 0x088e2000 0 0x154>; + #phy-cells = <0>; + + clocks = <&tcsr TCSR_USB3_MP1_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_HS1_MP_BCR>; + + status = "disabled"; + }; + + usb_mp_qmpphy0: phy@88e3000 { + compatible = "qcom,x1e80100-qmp-usb3-uni-phy"; + reg = <0 0x088e3000 0 0x2000>; + + clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "pipe"; + + resets = <&gcc GCC_USB3_UNIPHY_MP0_BCR>, + <&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>; + reset-names = "phy", + "phy_phy"; + + power-domains = <&gcc GCC_USB3_MP_SS0_PHY_GDSC>; + + #clock-cells = <0>; + clock-output-names = "usb_mp_phy0_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_mp_qmpphy1: phy@88e5000 { + compatible = "qcom,x1e80100-qmp-usb3-uni-phy"; + reg = <0 0x088e5000 0 0x2000>; + + clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "pipe"; + + resets = <&gcc GCC_USB3_UNIPHY_MP1_BCR>, + <&gcc GCC_USB3UNIPHY_PHY_MP1_BCR>; + reset-names = "phy", + "phy_phy"; + + power-domains = <&gcc GCC_USB3_MP_SS1_PHY_GDSC>; + + #clock-cells = <0>; + clock-output-names = "usb_mp_phy1_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + usb_1_ss2: usb@a0f8800 { compatible = "qcom,x1e80100-dwc3", "qcom,dwc3"; reg = <0 0x0a0f8800 0 0x400>; @@ -3897,6 +4152,92 @@ }; }; + usb_mp: usb@a4f8800 { + compatible = "qcom,x1e80100-dwc3-mp", "qcom,dwc3"; + reg = <0 0x0a4f8800 0 0x400>; + + clocks = <&gcc GCC_CFG_NOC_USB3_MP_AXI_CLK>, + <&gcc GCC_USB30_MP_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_MP_AXI_CLK>, + <&gcc GCC_USB30_MP_SLEEP_CLK>, + <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_USB_NORTH_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_USB_SOUTH_AXI_CLK>, + <&gcc GCC_SYS_NOC_USB_AXI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "noc_aggr", + "noc_aggr_north", + "noc_aggr_south", + "noc_sys"; + + assigned-clocks = <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MP_MASTER_CLK>; + assigned-clock-rates = <19200000>, + <200000000>; + + interrupts-extended = <&intc GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 52 IRQ_TYPE_EDGE_BOTH>, + <&pdc 51 IRQ_TYPE_EDGE_BOTH>, + <&pdc 54 IRQ_TYPE_EDGE_BOTH>, + <&pdc 53 IRQ_TYPE_EDGE_BOTH>, + <&pdc 55 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 56 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event_1", "pwr_event_2", + "hs_phy_1", "hs_phy_2", + "dp_hs_phy_1", "dm_hs_phy_1", + "dp_hs_phy_2", "dm_hs_phy_2", + "ss_phy_1", "ss_phy_2"; + + power-domains = <&gcc GCC_USB30_MP_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_MP_BCR>; + + interconnects = <&usb_north_anoc MASTER_USB3_MP QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_USB3_MP QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "usb-ddr", + "apps-usb"; + + wakeup-source; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + usb_mp_dwc3: usb@a400000 { + compatible = "snps,dwc3"; + reg = <0 0x0a400000 0 0xcd00>; + + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; + + iommus = <&apps_smmu 0x1400 0x0>; + + phys = <&usb_mp_hsphy0>, <&usb_mp_qmpphy0>, + <&usb_mp_hsphy1>, <&usb_mp_qmpphy1>; + phy-names = "usb2-0", "usb3-0", + "usb2-1", "usb3-1"; + dr_mode = "host"; + + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,usb3_lpm_capable; + + dma-coherent; + }; + }; + usb_1_ss0: usb@a6f8800 { compatible = "qcom,x1e80100-dwc3", "qcom,dwc3"; reg = <0 0x0a6f8800 0 0x400>; @@ -4215,11 +4556,11 @@ mdss_dp0: displayport-controller@ae90000 { compatible = "qcom,x1e80100-dp"; - reg = <0 0xae90000 0 0x200>, - <0 0xae90200 0 0x200>, - <0 0xae90400 0 0x600>, - <0 0xae91000 0 0x400>, - <0 0xae91400 0 0x400>; + reg = <0 0x0ae90000 0 0x200>, + <0 0x0ae90200 0 0x200>, + <0 0x0ae90400 0 0x600>, + <0 0x0ae91000 0 0x400>, + <0 0x0ae91400 0 0x400>; interrupts-extended = <&mdss 12>; @@ -4298,11 +4639,11 @@ mdss_dp1: displayport-controller@ae98000 { compatible = "qcom,x1e80100-dp"; - reg = <0 0xae98000 0 0x200>, - <0 0xae98200 0 0x200>, - <0 0xae98400 0 0x600>, - <0 0xae99000 0 0x400>, - <0 0xae99400 0 0x400>; + reg = <0 0x0ae98000 0 0x200>, + <0 0x0ae98200 0 0x200>, + <0 0x0ae98400 0 0x600>, + <0 0x0ae99000 0 0x400>, + <0 0x0ae99400 0 0x400>; interrupts-extended = <&mdss 13>; @@ -4381,11 +4722,11 @@ mdss_dp2: displayport-controller@ae9a000 { compatible = "qcom,x1e80100-dp"; - reg = <0 0xae9a000 0 0x200>, - <0 0xae9a200 0 0x200>, - <0 0xae9a400 0 0x600>, - <0 0xae9b000 0 0x400>, - <0 0xae9b400 0 0x400>; + reg = <0 0x0ae9a000 0 0x200>, + <0 0x0ae9a200 0 0x200>, + <0 0x0ae9a400 0 0x600>, + <0 0x0ae9b000 0 0x400>, + <0 0x0ae9b400 0 0x400>; interrupts-extended = <&mdss 14>; @@ -4402,14 +4743,14 @@ assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>, <&dispcc DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>; - assigned-clock-parents = <&mdss_dp2_phy 0>, - <&mdss_dp2_phy 1>; + assigned-clock-parents = <&usb_1_ss2_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_ss2_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; operating-points-v2 = <&mdss_dp2_opp_table>; power-domains = <&rpmhpd RPMHPD_MMCX>; - phys = <&mdss_dp2_phy>; + phys = <&usb_1_ss2_qmpphy QMP_USB43DP_DP_PHY>; phy-names = "dp"; #sound-dai-cells = <0>; @@ -4463,11 +4804,11 @@ mdss_dp3: displayport-controller@aea0000 { compatible = "qcom,x1e80100-dp"; - reg = <0 0xaea0000 0 0x200>, - <0 0xaea0200 0 0x200>, - <0 0xaea0400 0 0x600>, - <0 0xaea1000 0 0x400>, - <0 0xaea1400 0 0x400>; + reg = <0 0x0aea0000 0 0x200>, + <0 0x0aea0200 0 0x200>, + <0 0x0aea0400 0 0x600>, + <0 0x0aea1000 0 0x400>, + <0 0x0aea1400 0 0x400>; interrupts-extended = <&mdss 15>; @@ -4597,8 +4938,8 @@ <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, <&usb_1_ss1_qmpphy QMP_USB43DP_DP_LINK_CLK>, /* dp1 */ <&usb_1_ss1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, - <&mdss_dp2_phy 0>, /* dp2 */ - <&mdss_dp2_phy 1>, + <&usb_1_ss2_qmpphy QMP_USB43DP_DP_LINK_CLK>, /* dp2 */ + <&usb_1_ss2_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, <&mdss_dp3_phy 0>, /* dp3 */ <&mdss_dp3_phy 1>; power-domains = <&rpmhpd RPMHPD_MMCX>; @@ -4631,6 +4972,11 @@ #clock-cells = <0>; }; + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0 0x0c3f0000 0 0x400>; + }; + spmi: arbiter@c400000 { compatible = "qcom,x1e80100-spmi-pmic-arb"; reg = <0 0x0c400000 0 0x3000>, @@ -5241,12 +5587,50 @@ bias-disable; }; + qup_uart2_default: qup-uart2-default-state { + cts-pins { + pins = "gpio8"; + function = "qup0_se2"; + drive-strength = <2>; + bias-disable; + }; + + rts-pins { + pins = "gpio9"; + function = "qup0_se2"; + drive-strength = <2>; + bias-disable; + }; + + tx-pins { + pins = "gpio10"; + function = "qup0_se2"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio11"; + function = "qup0_se2"; + drive-strength = <2>; + bias-disable; + }; + }; + qup_uart21_default: qup-uart21-default-state { - /* TX, RX */ - pins = "gpio86", "gpio87"; - function = "qup2_se5"; - drive-strength = <2>; - bias-disable; + tx-pins { + pins = "gpio86"; + function = "qup2_se5"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio87"; + function = "qup2_se5"; + drive-strength = <2>; + bias-disable; + }; }; }; diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index fbd214a1a638..97228a3cb99c 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -112,9 +112,12 @@ dtb-$(CONFIG_ARCH_R8A77965) += r8a779m5-salvator-xs-panel-aa104xd12.dtb dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043u11-smarc.dtb dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043u11-smarc-cru-csi-ov5645.dtbo +dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043u11-smarc-du-adv7513.dtbo dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043-smarc-pmod.dtbo r9a07g043u11-smarc-cru-csi-ov5645-dtbs := r9a07g043u11-smarc.dtb r9a07g043u11-smarc-cru-csi-ov5645.dtbo dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043u11-smarc-cru-csi-ov5645.dtb +r9a07g043u11-smarc-du-adv7513-dtbs := r9a07g043u11-smarc.dtb r9a07g043u11-smarc-du-adv7513.dtbo +dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043u11-smarc-du-adv7513.dtb r9a07g043u11-smarc-pmod-dtbs := r9a07g043u11-smarc.dtb r9a07g043-smarc-pmod.dtbo dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043u11-smarc-pmod.dtb @@ -137,5 +140,7 @@ dtb-$(CONFIG_ARCH_R9A08G045) += r9a08g045s33-smarc.dtb dtb-$(CONFIG_ARCH_R9A09G011) += r9a09g011-v2mevk2.dtb +dtb-$(CONFIG_ARCH_R9A09G057) += r9a09g057h44-rzv2h-evk.dtb + dtb-$(CONFIG_ARCH_RCAR_GEN3) += draak-ebisu-panel-aa104xd12.dtbo dtb-$(CONFIG_ARCH_RCAR_GEN3) += salvator-panel-aa104xd12.dtbo diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi index 1dbf9d56c68d..f065ee90649a 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi @@ -2277,6 +2277,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 314>; + iommus = <&ipmmu_ds1 32>; status = "disabled"; }; @@ -2290,6 +2291,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 313>; + iommus = <&ipmmu_ds1 33>; status = "disabled"; }; @@ -2303,6 +2305,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 312>; + iommus = <&ipmmu_ds1 34>; status = "disabled"; }; @@ -2316,6 +2319,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 311>; + iommus = <&ipmmu_ds1 35>; status = "disabled"; }; @@ -2464,6 +2468,7 @@ clocks = <&cpg CPG_MOD 615>; power-domains = <&sysc R8A774A1_PD_A3VC>; resets = <&cpg 615>; + iommus = <&ipmmu_vc0 16>; }; fcpvb0: fcp@fe96f000 { @@ -2472,6 +2477,7 @@ clocks = <&cpg CPG_MOD 607>; power-domains = <&sysc R8A774A1_PD_A3VC>; resets = <&cpg 607>; + iommus = <&ipmmu_vi0 5>; }; fcpvd0: fcp@fea27000 { diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi index 10f22c52e79e..117cb6950f91 100644 --- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi @@ -2004,6 +2004,14 @@ resets = <&cpg 502>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>, + <&ipmmu_mp 2>, <&ipmmu_mp 3>, + <&ipmmu_mp 4>, <&ipmmu_mp 5>, + <&ipmmu_mp 6>, <&ipmmu_mp 7>, + <&ipmmu_mp 8>, <&ipmmu_mp 9>, + <&ipmmu_mp 10>, <&ipmmu_mp 11>, + <&ipmmu_mp 12>, <&ipmmu_mp 13>, + <&ipmmu_mp 14>, <&ipmmu_mp 15>; }; audma1: dma-controller@ec720000 { @@ -2038,6 +2046,14 @@ resets = <&cpg 501>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_mp 16>, <&ipmmu_mp 17>, + <&ipmmu_mp 18>, <&ipmmu_mp 19>, + <&ipmmu_mp 20>, <&ipmmu_mp 21>, + <&ipmmu_mp 22>, <&ipmmu_mp 23>, + <&ipmmu_mp 24>, <&ipmmu_mp 25>, + <&ipmmu_mp 26>, <&ipmmu_mp 27>, + <&ipmmu_mp 28>, <&ipmmu_mp 29>, + <&ipmmu_mp 30>, <&ipmmu_mp 31>; }; xhci0: usb@ee000000 { @@ -2145,6 +2161,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; resets = <&cpg 314>; + iommus = <&ipmmu_ds1 32>; status = "disabled"; }; @@ -2158,6 +2175,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; resets = <&cpg 313>; + iommus = <&ipmmu_ds1 33>; status = "disabled"; }; @@ -2171,6 +2189,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; resets = <&cpg 312>; + iommus = <&ipmmu_ds1 34>; status = "disabled"; }; @@ -2184,6 +2203,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; resets = <&cpg 311>; + iommus = <&ipmmu_ds1 35>; status = "disabled"; }; @@ -2211,6 +2231,7 @@ clocks = <&cpg CPG_MOD 815>; power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; resets = <&cpg 815>; + iommus = <&ipmmu_hc 2>; status = "disabled"; }; @@ -2343,6 +2364,7 @@ clocks = <&cpg CPG_MOD 615>; power-domains = <&sysc R8A774B1_PD_A3VP>; resets = <&cpg 615>; + iommus = <&ipmmu_vp0 0>; }; vspb: vsp@fe960000 { @@ -2395,6 +2417,7 @@ clocks = <&cpg CPG_MOD 607>; power-domains = <&sysc R8A774B1_PD_A3VP>; resets = <&cpg 607>; + iommus = <&ipmmu_vp0 5>; }; fcpvd0: fcp@fea27000 { @@ -2403,6 +2426,7 @@ clocks = <&cpg CPG_MOD 603>; power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; resets = <&cpg 603>; + iommus = <&ipmmu_vi0 8>; }; fcpvd1: fcp@fea2f000 { @@ -2411,6 +2435,7 @@ clocks = <&cpg CPG_MOD 602>; power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; resets = <&cpg 602>; + iommus = <&ipmmu_vi0 9>; }; fcpvi0: fcp@fe9af000 { @@ -2419,6 +2444,7 @@ clocks = <&cpg CPG_MOD 611>; power-domains = <&sysc R8A774B1_PD_A3VP>; resets = <&cpg 611>; + iommus = <&ipmmu_vp0 8>; }; csi20: csi2@fea80000 { diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index 3e2af50ce7c6..7655d5e3a034 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -1637,6 +1637,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; resets = <&cpg 314>; + iommus = <&ipmmu_ds1 32>; status = "disabled"; }; @@ -1650,6 +1651,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; resets = <&cpg 313>; + iommus = <&ipmmu_ds1 33>; status = "disabled"; }; @@ -1663,6 +1665,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; resets = <&cpg 311>; + iommus = <&ipmmu_ds1 35>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi index 1eeb4c7b4c4b..f845ca604de0 100644 --- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi @@ -2652,6 +2652,7 @@ clocks = <&cpg CPG_MOD 615>; power-domains = <&sysc R8A774E1_PD_A3VP>; resets = <&cpg 615>; + iommus = <&ipmmu_vp0 0>; }; fcpf1: fcp@fe951000 { @@ -2660,6 +2661,7 @@ clocks = <&cpg CPG_MOD 614>; power-domains = <&sysc R8A774E1_PD_A3VP>; resets = <&cpg 614>; + iommus = <&ipmmu_vp1 1>; }; fcpvb0: fcp@fe96f000 { @@ -2668,6 +2670,7 @@ clocks = <&cpg CPG_MOD 607>; power-domains = <&sysc R8A774E1_PD_A3VP>; resets = <&cpg 607>; + iommus = <&ipmmu_vp0 5>; }; fcpvb1: fcp@fe92f000 { @@ -2676,6 +2679,7 @@ clocks = <&cpg CPG_MOD 606>; power-domains = <&sysc R8A774E1_PD_A3VP>; resets = <&cpg 606>; + iommus = <&ipmmu_vp1 7>; }; fcpvi0: fcp@fe9af000 { @@ -2684,6 +2688,7 @@ clocks = <&cpg CPG_MOD 611>; power-domains = <&sysc R8A774E1_PD_A3VP>; resets = <&cpg 611>; + iommus = <&ipmmu_vp0 8>; }; fcpvi1: fcp@fe9bf000 { @@ -2692,6 +2697,7 @@ clocks = <&cpg CPG_MOD 610>; power-domains = <&sysc R8A774E1_PD_A3VP>; resets = <&cpg 610>; + iommus = <&ipmmu_vp1 9>; }; fcpvd0: fcp@fea27000 { @@ -2700,6 +2706,7 @@ clocks = <&cpg CPG_MOD 603>; power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; resets = <&cpg 603>; + iommus = <&ipmmu_vi0 8>; }; fcpvd1: fcp@fea2f000 { @@ -2708,6 +2715,7 @@ clocks = <&cpg CPG_MOD 602>; power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; resets = <&cpg 602>; + iommus = <&ipmmu_vi0 9>; }; csi20: csi2@fea80000 { diff --git a/arch/arm64/boot/dts/renesas/r8a77960.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi index 1122c470b72f..ee80f52dc7cf 100644 --- a/arch/arm64/boot/dts/renesas/r8a77960.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi @@ -2652,6 +2652,7 @@ clocks = <&cpg CPG_MOD 615>; power-domains = <&sysc R8A7796_PD_A3VC>; resets = <&cpg 615>; + iommus = <&ipmmu_vc0 16>; }; fcpvb0: fcp@fe96f000 { @@ -2660,6 +2661,7 @@ clocks = <&cpg CPG_MOD 607>; power-domains = <&sysc R8A7796_PD_A3VC>; resets = <&cpg 607>; + iommus = <&ipmmu_vi0 5>; }; fcpvi0: fcp@fe9af000 { diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi index bf1130af7de3..3b9066043a71 100644 --- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi @@ -2502,6 +2502,7 @@ clocks = <&cpg CPG_MOD 615>; power-domains = <&sysc R8A77961_PD_A3VC>; resets = <&cpg 615>; + iommus = <&ipmmu_vc0 16>; }; fcpvb0: fcp@fe96f000 { @@ -2510,6 +2511,7 @@ clocks = <&cpg CPG_MOD 607>; power-domains = <&sysc R8A77961_PD_A3VC>; resets = <&cpg 607>; + iommus = <&ipmmu_vi0 5>; }; fcpvi0: fcp@fe9af000 { diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index f02d1547b881..557bdf8fab17 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -2185,6 +2185,14 @@ resets = <&cpg 502>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>, + <&ipmmu_mp 2>, <&ipmmu_mp 3>, + <&ipmmu_mp 4>, <&ipmmu_mp 5>, + <&ipmmu_mp 6>, <&ipmmu_mp 7>, + <&ipmmu_mp 8>, <&ipmmu_mp 9>, + <&ipmmu_mp 10>, <&ipmmu_mp 11>, + <&ipmmu_mp 12>, <&ipmmu_mp 13>, + <&ipmmu_mp 14>, <&ipmmu_mp 15>; }; audma1: dma-controller@ec720000 { @@ -2219,6 +2227,14 @@ resets = <&cpg 501>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_mp 16>, <&ipmmu_mp 17>, + <&ipmmu_mp 18>, <&ipmmu_mp 19>, + <&ipmmu_mp 20>, <&ipmmu_mp 21>, + <&ipmmu_mp 22>, <&ipmmu_mp 23>, + <&ipmmu_mp 24>, <&ipmmu_mp 25>, + <&ipmmu_mp 26>, <&ipmmu_mp 27>, + <&ipmmu_mp 28>, <&ipmmu_mp 29>, + <&ipmmu_mp 30>, <&ipmmu_mp 31>; }; xhci0: usb@ee000000 { @@ -2396,6 +2412,7 @@ clocks = <&cpg CPG_MOD 815>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 815>; + iommus = <&ipmmu_hc 2>; status = "disabled"; }; @@ -2490,6 +2507,7 @@ clocks = <&cpg CPG_MOD 615>; power-domains = <&sysc R8A77965_PD_A3VP>; resets = <&cpg 615>; + iommus = <&ipmmu_vp0 0>; }; vspb: vsp@fe960000 { @@ -2542,6 +2560,7 @@ clocks = <&cpg CPG_MOD 607>; power-domains = <&sysc R8A77965_PD_A3VP>; resets = <&cpg 607>; + iommus = <&ipmmu_vp0 5>; }; fcpvd0: fcp@fea27000 { @@ -2550,6 +2569,7 @@ clocks = <&cpg CPG_MOD 603>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 603>; + iommus = <&ipmmu_vi0 8>; }; fcpvd1: fcp@fea2f000 { @@ -2558,6 +2578,7 @@ clocks = <&cpg CPG_MOD 602>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 602>; + iommus = <&ipmmu_vi0 9>; }; fcpvi0: fcp@fe9af000 { @@ -2566,6 +2587,7 @@ clocks = <&cpg CPG_MOD 611>; power-domains = <&sysc R8A77965_PD_A3VP>; resets = <&cpg 611>; + iommus = <&ipmmu_vp0 8>; }; cmm0: cmm@fea40000 { diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi index 64fb95b1c89a..38145fd6acf0 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi @@ -1092,6 +1092,7 @@ clocks = <&cpg CPG_MOD 603>; power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 603>; + iommus = <&ipmmu_vi0 8>; }; csi40: csi2@feaa0000 { diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi index 0c2b157036e7..55a6c622f873 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi @@ -1266,6 +1266,7 @@ clocks = <&cpg CPG_MOD 813>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 813>; + iommus = <&ipmmu_ds1 34>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1430,6 +1431,7 @@ clocks = <&cpg CPG_MOD 603>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 603>; + iommus = <&ipmmu_vi0 8>; }; csi40: csi2@feaa0000 { diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi index d76347001cc1..1f4ab27acc33 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi @@ -707,6 +707,7 @@ phy-mode = "rgmii"; rx-internal-delay-ps = <0>; tx-internal-delay-ps = <0>; + iommus = <&ipmmu_ds1 0>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -755,6 +756,7 @@ phy-mode = "rgmii"; rx-internal-delay-ps = <0>; tx-internal-delay-ps = <0>; + iommus = <&ipmmu_ds1 1>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -803,6 +805,7 @@ phy-mode = "rgmii"; rx-internal-delay-ps = <0>; tx-internal-delay-ps = <0>; + iommus = <&ipmmu_ds1 2>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -851,6 +854,7 @@ phy-mode = "rgmii"; rx-internal-delay-ps = <0>; tx-internal-delay-ps = <0>; + iommus = <&ipmmu_ds1 3>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -899,6 +903,7 @@ phy-mode = "rgmii"; rx-internal-delay-ps = <0>; tx-internal-delay-ps = <0>; + iommus = <&ipmmu_ds1 4>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -947,6 +952,7 @@ phy-mode = "rgmii"; rx-internal-delay-ps = <0>; tx-internal-delay-ps = <0>; + iommus = <&ipmmu_ds1 11>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1168,7 +1174,8 @@ }; vin00: video@e6ef0000 { - compatible = "renesas,vin-r8a779a0"; + compatible = "renesas,vin-r8a779a0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ef0000 0 0x1000>; interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 730>; @@ -1196,7 +1203,8 @@ }; vin01: video@e6ef1000 { - compatible = "renesas,vin-r8a779a0"; + compatible = "renesas,vin-r8a779a0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ef1000 0 0x1000>; interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 731>; @@ -1224,7 +1232,8 @@ }; vin02: video@e6ef2000 { - compatible = "renesas,vin-r8a779a0"; + compatible = "renesas,vin-r8a779a0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ef2000 0 0x1000>; interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 800>; @@ -1252,7 +1261,8 @@ }; vin03: video@e6ef3000 { - compatible = "renesas,vin-r8a779a0"; + compatible = "renesas,vin-r8a779a0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ef3000 0 0x1000>; interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 801>; @@ -1280,7 +1290,8 @@ }; vin04: video@e6ef4000 { - compatible = "renesas,vin-r8a779a0"; + compatible = "renesas,vin-r8a779a0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ef4000 0 0x1000>; interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 802>; @@ -1308,7 +1319,8 @@ }; vin05: video@e6ef5000 { - compatible = "renesas,vin-r8a779a0"; + compatible = "renesas,vin-r8a779a0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ef5000 0 0x1000>; interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 803>; @@ -1336,7 +1348,8 @@ }; vin06: video@e6ef6000 { - compatible = "renesas,vin-r8a779a0"; + compatible = "renesas,vin-r8a779a0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ef6000 0 0x1000>; interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 804>; @@ -1364,7 +1377,8 @@ }; vin07: video@e6ef7000 { - compatible = "renesas,vin-r8a779a0"; + compatible = "renesas,vin-r8a779a0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ef7000 0 0x1000>; interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 805>; @@ -1392,7 +1406,8 @@ }; vin08: video@e6ef8000 { - compatible = "renesas,vin-r8a779a0"; + compatible = "renesas,vin-r8a779a0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ef8000 0 0x1000>; interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 806>; @@ -1420,7 +1435,8 @@ }; vin09: video@e6ef9000 { - compatible = "renesas,vin-r8a779a0"; + compatible = "renesas,vin-r8a779a0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ef9000 0 0x1000>; interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 807>; @@ -1448,7 +1464,8 @@ }; vin10: video@e6efa000 { - compatible = "renesas,vin-r8a779a0"; + compatible = "renesas,vin-r8a779a0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6efa000 0 0x1000>; interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 808>; @@ -1476,7 +1493,8 @@ }; vin11: video@e6efb000 { - compatible = "renesas,vin-r8a779a0"; + compatible = "renesas,vin-r8a779a0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6efb000 0 0x1000>; interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 809>; @@ -1504,7 +1522,8 @@ }; vin12: video@e6efc000 { - compatible = "renesas,vin-r8a779a0"; + compatible = "renesas,vin-r8a779a0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6efc000 0 0x1000>; interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 810>; @@ -1532,7 +1551,8 @@ }; vin13: video@e6efd000 { - compatible = "renesas,vin-r8a779a0"; + compatible = "renesas,vin-r8a779a0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6efd000 0 0x1000>; interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 811>; @@ -1560,7 +1580,8 @@ }; vin14: video@e6efe000 { - compatible = "renesas,vin-r8a779a0"; + compatible = "renesas,vin-r8a779a0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6efe000 0 0x1000>; interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 812>; @@ -1588,7 +1609,8 @@ }; vin15: video@e6eff000 { - compatible = "renesas,vin-r8a779a0"; + compatible = "renesas,vin-r8a779a0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6eff000 0 0x1000>; interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 813>; @@ -1616,7 +1638,8 @@ }; vin16: video@e6ed0000 { - compatible = "renesas,vin-r8a779a0"; + compatible = "renesas,vin-r8a779a0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ed0000 0 0x1000>; interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 814>; @@ -1644,7 +1667,8 @@ }; vin17: video@e6ed1000 { - compatible = "renesas,vin-r8a779a0"; + compatible = "renesas,vin-r8a779a0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ed1000 0 0x1000>; interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 815>; @@ -1672,7 +1696,8 @@ }; vin18: video@e6ed2000 { - compatible = "renesas,vin-r8a779a0"; + compatible = "renesas,vin-r8a779a0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ed2000 0 0x1000>; interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 816>; @@ -1700,7 +1725,8 @@ }; vin19: video@e6ed3000 { - compatible = "renesas,vin-r8a779a0"; + compatible = "renesas,vin-r8a779a0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ed3000 0 0x1000>; interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 817>; @@ -1728,7 +1754,8 @@ }; vin20: video@e6ed4000 { - compatible = "renesas,vin-r8a779a0"; + compatible = "renesas,vin-r8a779a0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ed4000 0 0x1000>; interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 818>; @@ -1756,7 +1783,8 @@ }; vin21: video@e6ed5000 { - compatible = "renesas,vin-r8a779a0"; + compatible = "renesas,vin-r8a779a0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ed5000 0 0x1000>; interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 819>; @@ -1784,7 +1812,8 @@ }; vin22: video@e6ed6000 { - compatible = "renesas,vin-r8a779a0"; + compatible = "renesas,vin-r8a779a0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ed6000 0 0x1000>; interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 820>; @@ -1812,7 +1841,8 @@ }; vin23: video@e6ed7000 { - compatible = "renesas,vin-r8a779a0"; + compatible = "renesas,vin-r8a779a0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ed7000 0 0x1000>; interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 821>; @@ -1840,7 +1870,8 @@ }; vin24: video@e6ed8000 { - compatible = "renesas,vin-r8a779a0"; + compatible = "renesas,vin-r8a779a0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ed8000 0 0x1000>; interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 822>; @@ -1868,7 +1899,8 @@ }; vin25: video@e6ed9000 { - compatible = "renesas,vin-r8a779a0"; + compatible = "renesas,vin-r8a779a0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ed9000 0 0x1000>; interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 823>; @@ -1896,7 +1928,8 @@ }; vin26: video@e6eda000 { - compatible = "renesas,vin-r8a779a0"; + compatible = "renesas,vin-r8a779a0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6eda000 0 0x1000>; interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 824>; @@ -1924,7 +1957,8 @@ }; vin27: video@e6edb000 { - compatible = "renesas,vin-r8a779a0"; + compatible = "renesas,vin-r8a779a0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6edb000 0 0x1000>; interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 825>; @@ -1952,7 +1986,8 @@ }; vin28: video@e6edc000 { - compatible = "renesas,vin-r8a779a0"; + compatible = "renesas,vin-r8a779a0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6edc000 0 0x1000>; interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 826>; @@ -1980,7 +2015,8 @@ }; vin29: video@e6edd000 { - compatible = "renesas,vin-r8a779a0"; + compatible = "renesas,vin-r8a779a0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6edd000 0 0x1000>; interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 827>; @@ -2008,7 +2044,8 @@ }; vin30: video@e6ede000 { - compatible = "renesas,vin-r8a779a0"; + compatible = "renesas,vin-r8a779a0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ede000 0 0x1000>; interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 828>; @@ -2036,7 +2073,8 @@ }; vin31: video@e6edf000 { - compatible = "renesas,vin-r8a779a0"; + compatible = "renesas,vin-r8a779a0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6edf000 0 0x1000>; interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 829>; @@ -2096,6 +2134,14 @@ resets = <&cpg 709>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>, + <&ipmmu_ds0 2>, <&ipmmu_ds0 3>, + <&ipmmu_ds0 4>, <&ipmmu_ds0 5>, + <&ipmmu_ds0 6>, <&ipmmu_ds0 7>, + <&ipmmu_ds0 8>, <&ipmmu_ds0 9>, + <&ipmmu_ds0 10>, <&ipmmu_ds0 11>, + <&ipmmu_ds0 12>, <&ipmmu_ds0 13>, + <&ipmmu_ds0 14>, <&ipmmu_ds0 15>; }; dmac2: dma-controller@e7351000 { @@ -2121,6 +2167,10 @@ resets = <&cpg 710>; #dma-cells = <1>; dma-channels = <8>; + iommus = <&ipmmu_ds0 16>, <&ipmmu_ds0 17>, + <&ipmmu_ds0 18>, <&ipmmu_ds0 19>, + <&ipmmu_ds0 20>, <&ipmmu_ds0 21>, + <&ipmmu_ds0 22>, <&ipmmu_ds0 23>; }; mmc0: mmc@ee140000 { @@ -2278,6 +2328,7 @@ clocks = <&cpg CPG_MOD 508>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; resets = <&cpg 508>; + iommus = <&ipmmu_vi1 6>; }; fcpvd1: fcp@fea11000 { @@ -2286,6 +2337,7 @@ clocks = <&cpg CPG_MOD 509>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; resets = <&cpg 509>; + iommus = <&ipmmu_vi1 7>; }; vspd0: vsp@fea20000 { @@ -2449,7 +2501,8 @@ }; isp0: isp@fed00000 { - compatible = "renesas,r8a779a0-isp"; + compatible = "renesas,r8a779a0-isp", + "renesas,rcar-gen4-isp"; reg = <0 0xfed00000 0 0x10000>; interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 612>; @@ -2532,7 +2585,8 @@ }; isp1: isp@fed20000 { - compatible = "renesas,r8a779a0-isp"; + compatible = "renesas,r8a779a0-isp", + "renesas,rcar-gen4-isp"; reg = <0 0xfed20000 0 0x10000>; interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 613>; @@ -2615,7 +2669,8 @@ }; isp2: isp@fed30000 { - compatible = "renesas,r8a779a0-isp"; + compatible = "renesas,r8a779a0-isp", + "renesas,rcar-gen4-isp"; reg = <0 0xfed30000 0 0x10000>; interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 614>; @@ -2698,7 +2753,8 @@ }; isp3: isp@fed40000 { - compatible = "renesas,r8a779a0-isp"; + compatible = "renesas,r8a779a0-isp", + "renesas,rcar-gen4-isp"; reg = <0 0xfed40000 0 0x10000>; interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 615>; diff --git a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi index 53d1d4d8197a..12900ebd098b 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi @@ -175,6 +175,20 @@ clock-frequency = <0>; }; + pcie0_clkref: pcie0-clkref { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + pcie1_clkref: pcie1-clkref { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + pmu_a76 { compatible = "arm,cortex-a76-pmu"; interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; @@ -553,6 +567,20 @@ status = "disabled"; }; + tsn0: ethernet@e6460000 { + compatible = "renesas,r8a779g0-ethertsn", "renesas,rcar-gen4-ethertsn"; + reg = <0 0xe6460000 0 0x7000>, + <0 0xe6449000 0 0x500>; + reg-names = "tsnes", "gptp"; + interrupts = <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + clocks = <&cpg CPG_MOD 2723>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 2723>; + status = "disabled"; + }; + i2c0: i2c@e6500000 { compatible = "renesas,i2c-r8a779g0", "renesas,rcar-gen4-i2c"; @@ -723,6 +751,126 @@ status = "disabled"; }; + pciec0: pcie@e65d0000 { + compatible = "renesas,r8a779g0-pcie", + "renesas,rcar-gen4-pcie"; + reg = <0 0xe65d0000 0 0x1000>, <0 0xe65d2000 0 0x0800>, + <0 0xe65d3000 0 0x2000>, <0 0xe65d5000 0 0x1200>, + <0 0xe65d6200 0 0x0e00>, <0 0xe65d7000 0 0x0400>, + <0 0xfe000000 0 0x400000>; + reg-names = "dbi", "dbi2", "atu", "dma", "app", "phy", "config"; + interrupts = <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi", "dma", "sft_ce", "app"; + clocks = <&cpg CPG_MOD 624>, <&pcie0_clkref>; + clock-names = "core", "ref"; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 624>; + reset-names = "pwr"; + max-link-speed = <4>; + num-lanes = <2>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe000000 0 0x00400000>, + <0x02000000 0 0x30000000 0 0x30000000 0 0x10000000>; + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &gic GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gic GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gic GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gic GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>; + snps,enable-cdm-check; + status = "disabled"; + }; + + pciec1: pcie@e65d8000 { + compatible = "renesas,r8a779g0-pcie", + "renesas,rcar-gen4-pcie"; + reg = <0 0xe65d8000 0 0x1000>, <0 0xe65da000 0 0x0800>, + <0 0xe65db000 0 0x2000>, <0 0xe65dd000 0 0x1200>, + <0 0xe65de200 0 0x0e00>, <0 0xe65df000 0 0x0400>, + <0 0xee900000 0 0x400000>; + reg-names = "dbi", "dbi2", "atu", "dma", "app", "phy", "config"; + interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi", "dma", "sft_ce", "app"; + clocks = <&cpg CPG_MOD 625>, <&pcie1_clkref>; + clock-names = "core", "ref"; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 625>; + reset-names = "pwr"; + max-link-speed = <4>; + num-lanes = <2>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00400000>, + <0x02000000 0 0xc0000000 0 0xc0000000 0 0x10000000>; + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &gic GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gic GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gic GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gic GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>; + snps,enable-cdm-check; + status = "disabled"; + }; + + pciec0_ep: pcie-ep@e65d0000 { + compatible = "renesas,r8a779g0-pcie-ep", + "renesas,rcar-gen4-pcie-ep"; + reg = <0 0xe65d0000 0 0x2000>, <0 0xe65d2000 0 0x1000>, + <0 0xe65d3000 0 0x2000>, <0 0xe65d5000 0 0x1200>, + <0 0xe65d6200 0 0x0e00>, <0 0xe65d7000 0 0x0400>, + <0 0xfe000000 0 0x400000>; + reg-names = "dbi", "dbi2", "atu", "dma", "app", "phy", "addr_space"; + interrupts = <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dma", "sft_ce", "app"; + clocks = <&cpg CPG_MOD 624>, <&pcie0_clkref>; + clock-names = "core", "ref"; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 624>; + reset-names = "pwr"; + max-link-speed = <4>; + num-lanes = <2>; + max-functions = /bits/ 8 <2>; + status = "disabled"; + }; + + pciec1_ep: pcie-ep@e65d8000 { + compatible = "renesas,r8a779g0-pcie-ep", + "renesas,rcar-gen4-pcie-ep"; + reg = <0 0xe65d8000 0 0x2000>, <0 0xe65da000 0 0x1000>, + <0 0xe65db000 0 0x2000>, <0 0xe65dd000 0 0x1200>, + <0 0xe65de200 0 0x0e00>, <0 0xe65df000 0 0x0400>, + <0 0xee900000 0 0x400000>; + reg-names = "dbi", "dbi2", "atu", "dma", "app", "phy", "addr_space"; + interrupts = <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dma", "sft_ce", "app"; + clocks = <&cpg CPG_MOD 625>, <&pcie1_clkref>; + clock-names = "core", "ref"; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 625>; + reset-names = "pwr"; + max-link-speed = <4>; + num-lanes = <2>; + max-functions = /bits/ 8 <2>; + status = "disabled"; + }; + canfd: can@e6660000 { compatible = "renesas,r8a779g0-canfd", "renesas,rcar-gen4-canfd"; @@ -815,6 +963,7 @@ phy-mode = "rgmii"; rx-internal-delay-ps = <0>; tx-internal-delay-ps = <0>; + iommus = <&ipmmu_hc 0>; status = "disabled"; }; @@ -860,6 +1009,7 @@ phy-mode = "rgmii"; rx-internal-delay-ps = <0>; tx-internal-delay-ps = <0>; + iommus = <&ipmmu_hc 1>; status = "disabled"; }; @@ -905,6 +1055,7 @@ phy-mode = "rgmii"; rx-internal-delay-ps = <0>; tx-internal-delay-ps = <0>; + iommus = <&ipmmu_hc 2>; status = "disabled"; }; @@ -1184,7 +1335,8 @@ }; vin00: video@e6ef0000 { - compatible = "renesas,vin-r8a779g0"; + compatible = "renesas,vin-r8a779g0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ef0000 0 0x1000>; interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 730>; @@ -1212,7 +1364,8 @@ }; vin01: video@e6ef1000 { - compatible = "renesas,vin-r8a779g0"; + compatible = "renesas,vin-r8a779g0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ef1000 0 0x1000>; interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 731>; @@ -1240,7 +1393,8 @@ }; vin02: video@e6ef2000 { - compatible = "renesas,vin-r8a779g0"; + compatible = "renesas,vin-r8a779g0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ef2000 0 0x1000>; interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 800>; @@ -1268,7 +1422,8 @@ }; vin03: video@e6ef3000 { - compatible = "renesas,vin-r8a779g0"; + compatible = "renesas,vin-r8a779g0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ef3000 0 0x1000>; interrupts = <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 801>; @@ -1296,7 +1451,8 @@ }; vin04: video@e6ef4000 { - compatible = "renesas,vin-r8a779g0"; + compatible = "renesas,vin-r8a779g0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ef4000 0 0x1000>; interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 802>; @@ -1324,7 +1480,8 @@ }; vin05: video@e6ef5000 { - compatible = "renesas,vin-r8a779g0"; + compatible = "renesas,vin-r8a779g0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ef5000 0 0x1000>; interrupts = <GIC_SPI 534 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 803>; @@ -1352,7 +1509,8 @@ }; vin06: video@e6ef6000 { - compatible = "renesas,vin-r8a779g0"; + compatible = "renesas,vin-r8a779g0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ef6000 0 0x1000>; interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 804>; @@ -1380,7 +1538,8 @@ }; vin07: video@e6ef7000 { - compatible = "renesas,vin-r8a779g0"; + compatible = "renesas,vin-r8a779g0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ef7000 0 0x1000>; interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 805>; @@ -1408,7 +1567,8 @@ }; vin08: video@e6ef8000 { - compatible = "renesas,vin-r8a779g0"; + compatible = "renesas,vin-r8a779g0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ef8000 0 0x1000>; interrupts = <GIC_SPI 537 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 806>; @@ -1436,7 +1596,8 @@ }; vin09: video@e6ef9000 { - compatible = "renesas,vin-r8a779g0"; + compatible = "renesas,vin-r8a779g0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ef9000 0 0x1000>; interrupts = <GIC_SPI 538 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 807>; @@ -1464,7 +1625,8 @@ }; vin10: video@e6efa000 { - compatible = "renesas,vin-r8a779g0"; + compatible = "renesas,vin-r8a779g0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6efa000 0 0x1000>; interrupts = <GIC_SPI 539 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 808>; @@ -1492,7 +1654,8 @@ }; vin11: video@e6efb000 { - compatible = "renesas,vin-r8a779g0"; + compatible = "renesas,vin-r8a779g0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6efb000 0 0x1000>; interrupts = <GIC_SPI 540 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 809>; @@ -1520,7 +1683,8 @@ }; vin12: video@e6efc000 { - compatible = "renesas,vin-r8a779g0"; + compatible = "renesas,vin-r8a779g0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6efc000 0 0x1000>; interrupts = <GIC_SPI 541 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 810>; @@ -1548,7 +1712,8 @@ }; vin13: video@e6efd000 { - compatible = "renesas,vin-r8a779g0"; + compatible = "renesas,vin-r8a779g0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6efd000 0 0x1000>; interrupts = <GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 811>; @@ -1576,7 +1741,8 @@ }; vin14: video@e6efe000 { - compatible = "renesas,vin-r8a779g0"; + compatible = "renesas,vin-r8a779g0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6efe000 0 0x1000>; interrupts = <GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 812>; @@ -1604,7 +1770,8 @@ }; vin15: video@e6eff000 { - compatible = "renesas,vin-r8a779g0"; + compatible = "renesas,vin-r8a779g0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6eff000 0 0x1000>; interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 813>; @@ -1987,6 +2154,7 @@ clocks = <&cpg CPG_MOD 508>; power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; resets = <&cpg 508>; + iommus = <&ipmmu_vi1 6>; }; fcpvd1: fcp@fea11000 { @@ -1995,6 +2163,7 @@ clocks = <&cpg CPG_MOD 509>; power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; resets = <&cpg 509>; + iommus = <&ipmmu_vi1 7>; }; vspd0: vsp@fea20000 { @@ -2054,7 +2223,8 @@ }; isp0: isp@fed00000 { - compatible = "renesas,r8a779g0-isp"; + compatible = "renesas,r8a779g0-isp", + "renesas,rcar-gen4-isp"; reg = <0 0xfed00000 0 0x10000>; interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_LOW>; clocks = <&cpg CPG_MOD 612>; @@ -2137,7 +2307,8 @@ }; isp1: isp@fed20000 { - compatible = "renesas,r8a779g0-isp"; + compatible = "renesas,r8a779g0-isp", + "renesas,rcar-gen4-isp"; reg = <0 0xfed20000 0 0x10000>; interrupts = <GIC_SPI 474 IRQ_TYPE_LEVEL_LOW>; clocks = <&cpg CPG_MOD 613>; diff --git a/arch/arm64/boot/dts/renesas/r8a779g2-white-hawk-single.dts b/arch/arm64/boot/dts/renesas/r8a779g2-white-hawk-single.dts index 2f79e5a61248..50a428572d9b 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g2-white-hawk-single.dts +++ b/arch/arm64/boot/dts/renesas/r8a779g2-white-hawk-single.dts @@ -24,3 +24,54 @@ groups = "hscif0_data", "hscif0_ctrl"; function = "hscif0"; }; + +&pfc { + tsn0_pins: tsn0 { + mux { + groups = "tsn0_link", "tsn0_mdio", "tsn0_rgmii", + "tsn0_txcrefclk"; + function = "tsn0"; + }; + + link { + groups = "tsn0_link"; + bias-disable; + }; + + mdio { + groups = "tsn0_mdio"; + drive-strength = <24>; + bias-disable; + }; + + rgmii { + groups = "tsn0_rgmii"; + drive-strength = <24>; + bias-disable; + }; + }; +}; + +&tsn0 { + pinctrl-0 = <&tsn0_pins>; + pinctrl-names = "default"; + phy-mode = "rgmii"; + phy-handle = <&phy3>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; + reset-post-delay-us = <4000>; + + phy3: ethernet-phy@0 { + compatible = "ethernet-phy-id002b.0980", + "ethernet-phy-ieee802.3-c22"; + reg = <0>; + interrupt-parent = <&gpio4>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts b/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts index 2b9a19bb1c5d..9a1917b87f61 100644 --- a/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts +++ b/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts @@ -5,10 +5,31 @@ * Copyright (C) 2023 Renesas Electronics Corp. * Copyright (C) 2024 Glider bv */ +/* + * [How to use Sound] + * + * Because R-Car V4M has only 1 SSI, it cannot handle both Playback/Capture + * at the same time. You need to switch the direction which is controlled + * by the GP0_01 pin via amixer. + * + * Playback (CN9500) + * > amixer set "MUX" "Playback" // for GP0_01 + * > amixer set "DAC 1" 85% + * > aplay xxx.wav + * + * Capture (CN9501) + * > amixer set "MUX" "Capture" // for GP0_01 + * > amixer set "Mic 1" 80% + * > amixer set "ADC 1" on + * > amixer set 'ADC 1' 80% + * > arecord xxx hoge.wav + */ /dts-v1/; #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> #include "r8a779h0.dtsi" @@ -26,11 +47,74 @@ ethernet0 = &avb0; }; + can_transceiver0: can-phy0 { + compatible = "nxp,tjr1443"; + #phy-cells = <0>; + enable-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; + max-bitrate = <5000000>; + }; + chosen { bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:921600n8"; }; + keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&keys_pins>; + pinctrl-names = "default"; + + key-1 { + gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_1>; + label = "SW47"; + wakeup-source; + debounce-interval = <20>; + }; + + key-2 { + gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_2>; + label = "SW48"; + wakeup-source; + debounce-interval = <20>; + }; + + key-3 { + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_3>; + label = "SW49"; + wakeup-source; + debounce-interval = <20>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-1 { + gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; + }; + + led-2 { + gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; + }; + + led-3 { + gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <3>; + }; + }; + memory@48000000 { device_type = "memory"; /* first 128MB is reserved for secure area. */ @@ -59,6 +143,24 @@ regulator-boot-on; regulator-always-on; }; + + sound_mux: sound-mux { + compatible = "simple-audio-mux"; + mux-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; + state-labels = "Playback", "Capture"; + }; + + sound_card: sound { + compatible = "audio-graph-card2"; + label = "rcar-sound"; + aux-devs = <&sound_mux>; // for GP0_01 + + links = <&rsnd_port>; // AK4619 Audio Codec + }; +}; + +&audio_clkin { + clock-frequency = <24576000>; }; &avb0 { @@ -79,6 +181,25 @@ }; }; +&can_clk { + clock-frequency = <40000000>; +}; + +&canfd { + pinctrl-0 = <&canfd0_pins>, <&canfd1_pins>, <&can_clk_pins>; + pinctrl-names = "default"; + status = "okay"; + + channel0 { + status = "okay"; + phys = <&can_transceiver0>; + }; + + channel1 { + status = "okay"; + }; +}; + &extal_clk { clock-frequency = <16666666>; }; @@ -87,6 +208,15 @@ clock-frequency = <32768>; }; +&gpio1 { + audio-power-hog { + gpio-hog; + gpios = <8 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "Audio-Power"; + }; +}; + &hscif0 { pinctrl-0 = <&hscif0_pins>; pinctrl-names = "default"; @@ -139,6 +269,29 @@ }; }; +&i2c3 { + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + codec@10 { + compatible = "asahi-kasei,ak4619"; + reg = <0x10>; + + clocks = <&rcar_sound>; + clock-names = "mclk"; + + #sound-dai-cells = <0>; + port { + ak4619_endpoint: endpoint { + remote-endpoint = <&rsnd_endpoint>; + }; + }; + }; +}; + &mmc0 { pinctrl-0 = <&mmc_pins>; pinctrl-1 = <&mmc_pins>; @@ -178,6 +331,21 @@ }; }; + can_clk_pins: can-clk { + groups = "can_clk"; + function = "can_clk"; + }; + + canfd0_pins: canfd0 { + groups = "canfd0_data"; + function = "canfd0"; + }; + + canfd1_pins: canfd1 { + groups = "canfd1_data"; + function = "canfd1"; + }; + hscif0_pins: hscif0 { groups = "hscif0_data", "hscif0_ctrl"; function = "hscif0"; @@ -193,6 +361,16 @@ function = "i2c0"; }; + i2c3_pins: i2c3 { + groups = "i2c3"; + function = "i2c3"; + }; + + keys_pins: keys { + pins = "GP_5_0", "GP_5_1", "GP_5_2"; + bias-pull-up; + }; + mmc_pins: mmc { groups = "mmc_data8", "mmc_ctrl", "mmc_ds"; function = "mmc"; @@ -213,6 +391,40 @@ groups = "scif_clk2"; function = "scif_clk2"; }; + + sound_clk_pins: sound_clk { + groups = "audio_clkin", "audio_clkout"; + function = "audio_clk"; + }; + + sound_pins: sound { + groups = "ssi_ctrl", "ssi_data"; + function = "ssi"; + }; +}; + +&rcar_sound { + pinctrl-0 = <&sound_clk_pins>, <&sound_pins>; + pinctrl-names = "default"; + + status = "okay"; + + /* audio_clkout */ + clock-frequency = <12288000>; + + ports { + rsnd_port: port { + rsnd_endpoint: endpoint { + remote-endpoint = <&ak4619_endpoint>; + bitclock-master; + frame-master; + + /* see above [How to use Sound] */ + playback = <&ssi0>; + capture = <&ssi0>; + }; + }; + }; }; &rpc { diff --git a/arch/arm64/boot/dts/renesas/r8a779h0.dtsi b/arch/arm64/boot/dts/renesas/r8a779h0.dtsi index a03ab2b6a859..12d8be3fd579 100644 --- a/arch/arm64/boot/dts/renesas/r8a779h0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779h0.dtsi @@ -21,6 +21,13 @@ clock-frequency = <0>; }; + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + cluster0_opp: opp-table-0 { compatible = "operating-points-v2"; @@ -636,6 +643,40 @@ status = "disabled"; }; + canfd: can@e6660000 { + compatible = "renesas,r8a779h0-canfd", + "renesas,rcar-gen4-canfd"; + reg = <0 0xe6660000 0 0x8500>; + interrupts = <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch_int", "g_int"; + clocks = <&cpg CPG_MOD 328>, + <&cpg CPG_CORE R8A779H0_CLK_CANFD>, + <&can_clk>; + clock-names = "fck", "canfd", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A779H0_CLK_CANFD>; + assigned-clock-rates = <80000000>; + power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>; + resets = <&cpg 328>; + status = "disabled"; + + channel0 { + status = "disabled"; + }; + + channel1 { + status = "disabled"; + }; + + channel2 { + status = "disabled"; + }; + + channel3 { + status = "disabled"; + }; + }; + avb0: ethernet@e6800000 { compatible = "renesas,etheravb-r8a779h0", "renesas,etheravb-rcar-gen4"; @@ -728,6 +769,7 @@ phy-mode = "rgmii"; rx-internal-delay-ps = <0>; tx-internal-delay-ps = <0>; + iommus = <&ipmmu_hc 1>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -776,11 +818,62 @@ phy-mode = "rgmii"; rx-internal-delay-ps = <0>; tx-internal-delay-ps = <0>; + iommus = <&ipmmu_hc 2>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; + pwm0: pwm@e6e30000 { + compatible = "renesas,pwm-r8a779h0", "renesas,pwm-rcar"; + reg = <0 0xe6e30000 0 0x10>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 628>; + power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>; + resets = <&cpg 628>; + status = "disabled"; + }; + + pwm1: pwm@e6e31000 { + compatible = "renesas,pwm-r8a779h0", "renesas,pwm-rcar"; + reg = <0 0xe6e31000 0 0x10>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 628>; + power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>; + resets = <&cpg 628>; + status = "disabled"; + }; + + pwm2: pwm@e6e32000 { + compatible = "renesas,pwm-r8a779h0", "renesas,pwm-rcar"; + reg = <0 0xe6e32000 0 0x10>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 628>; + power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>; + resets = <&cpg 628>; + status = "disabled"; + }; + + pwm3: pwm@e6e33000 { + compatible = "renesas,pwm-r8a779h0", "renesas,pwm-rcar"; + reg = <0 0xe6e33000 0 0x10>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 628>; + power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>; + resets = <&cpg 628>; + status = "disabled"; + }; + + pwm4: pwm@e6e34000 { + compatible = "renesas,pwm-r8a779h0", "renesas,pwm-rcar"; + reg = <0 0xe6e34000 0 0x10>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 628>; + power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>; + resets = <&cpg 628>; + status = "disabled"; + }; + scif0: serial@e6e60000 { compatible = "renesas,scif-r8a779h0", "renesas,rcar-gen4-scif", "renesas,scif"; @@ -946,7 +1039,8 @@ }; vin00: video@e6ef0000 { - compatible = "renesas,vin-r8a779h0"; + compatible = "renesas,vin-r8a779h0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ef0000 0 0x1000>; interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 730>; @@ -974,7 +1068,8 @@ }; vin01: video@e6ef1000 { - compatible = "renesas,vin-r8a779h0"; + compatible = "renesas,vin-r8a779h0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ef1000 0 0x1000>; interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 731>; @@ -1002,7 +1097,8 @@ }; vin02: video@e6ef2000 { - compatible = "renesas,vin-r8a779h0"; + compatible = "renesas,vin-r8a779h0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ef2000 0 0x1000>; interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 800>; @@ -1030,7 +1126,8 @@ }; vin03: video@e6ef3000 { - compatible = "renesas,vin-r8a779h0"; + compatible = "renesas,vin-r8a779h0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ef3000 0 0x1000>; interrupts = <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 801>; @@ -1058,7 +1155,8 @@ }; vin04: video@e6ef4000 { - compatible = "renesas,vin-r8a779h0"; + compatible = "renesas,vin-r8a779h0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ef4000 0 0x1000>; interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 802>; @@ -1086,7 +1184,8 @@ }; vin05: video@e6ef5000 { - compatible = "renesas,vin-r8a779h0"; + compatible = "renesas,vin-r8a779h0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ef5000 0 0x1000>; interrupts = <GIC_SPI 534 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 803>; @@ -1114,7 +1213,8 @@ }; vin06: video@e6ef6000 { - compatible = "renesas,vin-r8a779h0"; + compatible = "renesas,vin-r8a779h0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ef6000 0 0x1000>; interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 804>; @@ -1142,7 +1242,8 @@ }; vin07: video@e6ef7000 { - compatible = "renesas,vin-r8a779h0"; + compatible = "renesas,vin-r8a779h0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ef7000 0 0x1000>; interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 805>; @@ -1170,7 +1271,8 @@ }; vin08: video@e6ef8000 { - compatible = "renesas,vin-r8a779h0"; + compatible = "renesas,vin-r8a779h0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ef8000 0 0x1000>; interrupts = <GIC_SPI 537 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 806>; @@ -1198,7 +1300,8 @@ }; vin09: video@e6ef9000 { - compatible = "renesas,vin-r8a779h0"; + compatible = "renesas,vin-r8a779h0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6ef9000 0 0x1000>; interrupts = <GIC_SPI 538 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 807>; @@ -1226,7 +1329,8 @@ }; vin10: video@e6efa000 { - compatible = "renesas,vin-r8a779h0"; + compatible = "renesas,vin-r8a779h0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6efa000 0 0x1000>; interrupts = <GIC_SPI 539 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 808>; @@ -1254,7 +1358,8 @@ }; vin11: video@e6efb000 { - compatible = "renesas,vin-r8a779h0"; + compatible = "renesas,vin-r8a779h0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6efb000 0 0x1000>; interrupts = <GIC_SPI 540 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 809>; @@ -1282,7 +1387,8 @@ }; vin12: video@e6efc000 { - compatible = "renesas,vin-r8a779h0"; + compatible = "renesas,vin-r8a779h0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6efc000 0 0x1000>; interrupts = <GIC_SPI 541 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 810>; @@ -1310,7 +1416,8 @@ }; vin13: video@e6efd000 { - compatible = "renesas,vin-r8a779h0"; + compatible = "renesas,vin-r8a779h0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6efd000 0 0x1000>; interrupts = <GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 811>; @@ -1338,7 +1445,8 @@ }; vin14: video@e6efe000 { - compatible = "renesas,vin-r8a779h0"; + compatible = "renesas,vin-r8a779h0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6efe000 0 0x1000>; interrupts = <GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 812>; @@ -1366,7 +1474,8 @@ }; vin15: video@e6eff000 { - compatible = "renesas,vin-r8a779h0"; + compatible = "renesas,vin-r8a779h0", + "renesas,rcar-gen4-vin"; reg = <0 0xe6eff000 0 0x1000>; interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 813>; @@ -1720,7 +1829,8 @@ }; isp0: isp@fed00000 { - compatible = "renesas,r8a779h0-isp"; + compatible = "renesas,r8a779h0-isp", + "renesas,rcar-gen4-isp"; reg = <0 0xfed00000 0 0x10000>; interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_LOW>; clocks = <&cpg CPG_MOD 612>; @@ -1803,7 +1913,8 @@ }; isp1: isp@fed20000 { - compatible = "renesas,r8a779h0-isp"; + compatible = "renesas,r8a779h0-isp", + "renesas,rcar-gen4-isp"; reg = <0 0xfed20000 0 0x10000>; interrupts = <GIC_SPI 474 IRQ_TYPE_LEVEL_LOW>; clocks = <&cpg CPG_MOD 613>; diff --git a/arch/arm64/boot/dts/renesas/r9a07g043.dtsi b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi index 2eccab9c8962..593c66b27ad1 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g043.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi @@ -725,6 +725,10 @@ power-domains = <&cpg>; #reset-cells = <1>; status = "disabled"; + + usb0_vbus_otg: regulator-vbus { + regulator-name = "vbus"; + }; }; ohci0: usb@11c50000 { diff --git a/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi b/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi index 18ef297db933..a3998e5928f7 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi @@ -129,6 +129,55 @@ }; }; + vspd: vsp@10870000 { + compatible = "renesas,r9a07g043u-vsp2", "renesas,r9a07g044-vsp2"; + reg = <0 0x10870000 0 0x10000>; + interrupts = <SOC_PERIPHERAL_IRQ(149) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G043_LCDC_CLK_A>, + <&cpg CPG_MOD R9A07G043_LCDC_CLK_P>, + <&cpg CPG_MOD R9A07G043_LCDC_CLK_D>; + clock-names = "aclk", "pclk", "vclk"; + power-domains = <&cpg>; + resets = <&cpg R9A07G043_LCDC_RESET_N>; + renesas,fcp = <&fcpvd>; + }; + + fcpvd: fcp@10880000 { + compatible = "renesas,r9a07g043u-fcpvd", "renesas,fcpv"; + reg = <0 0x10880000 0 0x10000>; + clocks = <&cpg CPG_MOD R9A07G043_LCDC_CLK_A>, + <&cpg CPG_MOD R9A07G043_LCDC_CLK_P>, + <&cpg CPG_MOD R9A07G043_LCDC_CLK_D>; + clock-names = "aclk", "pclk", "vclk"; + power-domains = <&cpg>; + resets = <&cpg R9A07G043_LCDC_RESET_N>; + }; + + du: display@10890000 { + compatible = "renesas,r9a07g043u-du"; + reg = <0 0x10890000 0 0x10000>; + interrupts = <SOC_PERIPHERAL_IRQ(152) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G043_LCDC_CLK_A>, + <&cpg CPG_MOD R9A07G043_LCDC_CLK_P>, + <&cpg CPG_MOD R9A07G043_LCDC_CLK_D>; + clock-names = "aclk", "pclk", "vclk"; + power-domains = <&cpg>; + resets = <&cpg R9A07G043_LCDC_RESET_N>; + renesas,vsps = <&vspd 0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + }; + }; + irqc: interrupt-controller@110a0000 { compatible = "renesas,r9a07g043u-irqc", "renesas,rzg2l-irqc"; @@ -210,8 +259,8 @@ #interrupt-cells = <3>; #address-cells = <0>; interrupt-controller; - reg = <0x0 0x11900000 0 0x40000>, - <0x0 0x11940000 0 0x60000>; + reg = <0x0 0x11900000 0 0x20000>, + <0x0 0x11940000 0 0x40000>; interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc-du-adv7513.dtso b/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc-du-adv7513.dtso new file mode 100644 index 000000000000..ecd43a671000 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc-du-adv7513.dtso @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree overlay for the RZ/G2UL SMARC EVK with ADV7513 transmitter + * connected to DU enabled. + * + * Copyright (C) 2024 Renesas Electronics Corp. + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/pinctrl/rzg2l-pinctrl.h> + +#define ADV7513_PARENT_I2C i2c1 +#include "rz-smarc-du-adv7513.dtsi" + +&pinctrl { + du_pins: du { + data { + pinmux = <RZG2L_PORT_PINMUX(11, 2, 6)>, + <RZG2L_PORT_PINMUX(13, 1, 6)>, + <RZG2L_PORT_PINMUX(13, 0, 6)>, + <RZG2L_PORT_PINMUX(13, 4, 6)>, + <RZG2L_PORT_PINMUX(13, 3, 6)>, + <RZG2L_PORT_PINMUX(12, 1, 6)>, + <RZG2L_PORT_PINMUX(13, 2, 6)>, + <RZG2L_PORT_PINMUX(14, 0, 6)>, + <RZG2L_PORT_PINMUX(14, 2, 6)>, + <RZG2L_PORT_PINMUX(14, 1, 6)>, + <RZG2L_PORT_PINMUX(16, 0, 6)>, + <RZG2L_PORT_PINMUX(15, 0, 6)>, + <RZG2L_PORT_PINMUX(16, 1, 6)>, + <RZG2L_PORT_PINMUX(15, 1, 6)>, + <RZG2L_PORT_PINMUX(15, 3, 6)>, + <RZG2L_PORT_PINMUX(18, 0, 6)>, + <RZG2L_PORT_PINMUX(15, 2, 6)>, + <RZG2L_PORT_PINMUX(17, 0, 6)>, + <RZG2L_PORT_PINMUX(17, 2, 6)>, + <RZG2L_PORT_PINMUX(17, 1, 6)>, + <RZG2L_PORT_PINMUX(18, 1, 6)>, + <RZG2L_PORT_PINMUX(18, 2, 6)>, + <RZG2L_PORT_PINMUX(17, 3, 6)>, + <RZG2L_PORT_PINMUX(18, 3, 6)>; + drive-strength = <2>; + }; + + sync { + pinmux = <RZG2L_PORT_PINMUX(11, 0, 6)>, /* HSYNC */ + <RZG2L_PORT_PINMUX(12, 0, 6)>; /* VSYNC */ + drive-strength = <2>; + }; + + de { + pinmux = <RZG2L_PORT_PINMUX(11, 1, 6)>; /* DE */ + drive-strength = <2>; + }; + + clk { + pinmux = <RZG2L_PORT_PINMUX(11, 3, 6)>; /* CLK */ + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi index d3838e5820fc..6b1c77cd8261 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi @@ -1043,8 +1043,8 @@ #interrupt-cells = <3>; #address-cells = <0>; interrupt-controller; - reg = <0x0 0x11900000 0 0x40000>, - <0x0 0x11940000 0 0x60000>; + reg = <0x0 0x11900000 0 0x20000>, + <0x0 0x11940000 0 0x40000>; interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; }; @@ -1129,6 +1129,10 @@ power-domains = <&cpg>; #reset-cells = <1>; status = "disabled"; + + usb0_vbus_otg: regulator-vbus { + regulator-name = "vbus"; + }; }; ohci0: usb@11c50000 { diff --git a/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts index 0b90367b6d1e..ee5bf2c58051 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts +++ b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts @@ -47,6 +47,9 @@ #error "Cannot set as both PMOD_MTU3 and SW_RSPI_CAN are mutually exclusive" #endif +/* Please set SW_I2S0_I2S1. Default value is 0 */ +#define SW_I2S0_I2S1 0 + #include "r9a07g044c2.dtsi" #include "rzg2lc-smarc-som.dtsi" #include "rzg2lc-smarc.dtsi" diff --git a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi index 1de2e5f0917d..01f59914dd09 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi @@ -1051,8 +1051,8 @@ #interrupt-cells = <3>; #address-cells = <0>; interrupt-controller; - reg = <0x0 0x11900000 0 0x40000>, - <0x0 0x11940000 0 0x60000>; + reg = <0x0 0x11900000 0 0x20000>, + <0x0 0x11940000 0 0x40000>; interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; }; @@ -1137,6 +1137,10 @@ power-domains = <&cpg>; #reset-cells = <1>; status = "disabled"; + + usb0_vbus_otg: regulator-vbus { + regulator-name = "vbus"; + }; }; ohci0: usb@11c50000 { diff --git a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi index 0d5c47a65e46..067a26a66c24 100644 --- a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi @@ -72,6 +72,94 @@ status = "disabled"; }; + i2c0: i2c@10090000 { + compatible = "renesas,riic-r9a08g045", "renesas,riic-r9a09g057"; + reg = <0 0x10090000 0 0x400>; + interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 263 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 264 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD R9A08G045_I2C0_PCLK>; + clock-frequency = <100000>; + resets = <&cpg R9A08G045_I2C0_MRST>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@10090400 { + compatible = "renesas,riic-r9a08g045", "renesas,riic-r9a09g057"; + reg = <0 0x10090400 0 0x400>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 272 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD R9A08G045_I2C1_PCLK>; + clock-frequency = <100000>; + resets = <&cpg R9A08G045_I2C1_MRST>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@10090800 { + compatible = "renesas,riic-r9a08g045", "renesas,riic-r9a09g057"; + reg = <0 0x10090800 0 0x400>; + interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 279 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 280 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD R9A08G045_I2C2_PCLK>; + clock-frequency = <100000>; + resets = <&cpg R9A08G045_I2C2_MRST>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@10090c00 { + compatible = "renesas,riic-r9a08g045", "renesas,riic-r9a09g057"; + reg = <0 0x10090c00 0 0x400>; + interrupts = <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 287 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 288 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD R9A08G045_I2C3_PCLK>; + clock-frequency = <100000>; + resets = <&cpg R9A08G045_I2C3_MRST>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + cpg: clock-controller@11010000 { compatible = "renesas,r9a08g045-cpg"; reg = <0 0x11010000 0 0x10000>; @@ -181,6 +269,44 @@ resets = <&cpg R9A08G045_IA55_RESETN>; }; + dmac: dma-controller@11820000 { + compatible = "renesas,r9a08g045-dmac", + "renesas,rz-dmac"; + reg = <0 0x11820000 0 0x10000>, + <0 0x11830000 0 0x10000>; + interrupts = <GIC_SPI 111 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 112 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 114 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 115 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 116 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 117 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 118 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 119 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 120 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 121 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 123 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 124 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD R9A08G045_DMAC_ACLK>, + <&cpg CPG_MOD R9A08G045_DMAC_PCLK>; + clock-names = "main", "register"; + power-domains = <&cpg>; + resets = <&cpg R9A08G045_DMAC_ARESETN>, + <&cpg R9A08G045_DMAC_RST_ASYNC>; + reset-names = "arst", "rst_async"; + #dma-cells = <1>; + dma-channels = <16>; + }; + sdhi0: mmc@11c00000 { compatible = "renesas,sdhi-r9a08g045", "renesas,rzg2l-sdhi"; reg = <0x0 0x11c00000 0 0x10000>; @@ -269,8 +395,8 @@ #interrupt-cells = <3>; #address-cells = <0>; interrupt-controller; - reg = <0x0 0x12400000 0 0x40000>, - <0x0 0x12440000 0 0x60000>; + reg = <0x0 0x12400000 0 0x20000>, + <0x0 0x12440000 0 0x40000>; interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; }; diff --git a/arch/arm64/boot/dts/renesas/r9a09g057.dtsi b/arch/arm64/boot/dts/renesas/r9a09g057.dtsi new file mode 100644 index 000000000000..1ad5a1b6917f --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r9a09g057.dtsi @@ -0,0 +1,513 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/V2H(P) SoC + * + * Copyright (C) 2024 Renesas Electronics Corp. + */ + +#include <dt-bindings/clock/renesas,r9a09g057-cpg.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "renesas,r9a09g057"; + #address-cells = <2>; + #size-cells = <2>; + + audio_extal_clk: audio-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a55"; + reg = <0>; + device_type = "cpu"; + next-level-cache = <&L3_CA55>; + enable-method = "psci"; + }; + + cpu1: cpu@100 { + compatible = "arm,cortex-a55"; + reg = <0x100>; + device_type = "cpu"; + next-level-cache = <&L3_CA55>; + enable-method = "psci"; + }; + + cpu2: cpu@200 { + compatible = "arm,cortex-a55"; + reg = <0x200>; + device_type = "cpu"; + next-level-cache = <&L3_CA55>; + enable-method = "psci"; + }; + + cpu3: cpu@300 { + compatible = "arm,cortex-a55"; + reg = <0x300>; + device_type = "cpu"; + next-level-cache = <&L3_CA55>; + enable-method = "psci"; + }; + + L3_CA55: cache-controller-0 { + compatible = "cache"; + cache-unified; + cache-size = <0x100000>; + cache-level = <3>; + }; + }; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + qextal_clk: qextal-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + rtxin_clk: rtxin-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + soc: soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + pinctrl: pinctrl@10410000 { + compatible = "renesas,r9a09g057-pinctrl"; + reg = <0 0x10410000 0 0x10000>; + clocks = <&cpg CPG_CORE R9A09G057_IOTOP_0_SHCLK>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 96>; + #interrupt-cells = <2>; + interrupt-controller; + power-domains = <&cpg>; + resets = <&cpg 0xa5>, <&cpg 0xa6>; + }; + + cpg: clock-controller@10420000 { + compatible = "renesas,r9a09g057-cpg"; + reg = <0 0x10420000 0 0x10000>; + clocks = <&audio_extal_clk>, <&rtxin_clk>, <&qextal_clk>; + clock-names = "audio_extal", "rtxin", "qextal"; + #clock-cells = <2>; + #reset-cells = <1>; + #power-domain-cells = <0>; + }; + + sys: system-controller@10430000 { + compatible = "renesas,r9a09g057-sys"; + reg = <0 0x10430000 0 0x10000>; + clocks = <&cpg CPG_CORE R9A09G057_SYS_0_PCLK>; + resets = <&cpg 0x30>; + status = "disabled"; + }; + + ostm0: timer@11800000 { + compatible = "renesas,r9a09g057-ostm", "renesas,ostm"; + reg = <0x0 0x11800000 0x0 0x1000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_EDGE_RISING>; + clocks = <&cpg CPG_MOD 0x43>; + resets = <&cpg 0x6d>; + power-domains = <&cpg>; + status = "disabled"; + }; + + ostm1: timer@11801000 { + compatible = "renesas,r9a09g057-ostm", "renesas,ostm"; + reg = <0x0 0x11801000 0x0 0x1000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_EDGE_RISING>; + clocks = <&cpg CPG_MOD 0x44>; + resets = <&cpg 0x6e>; + power-domains = <&cpg>; + status = "disabled"; + }; + + ostm2: timer@14000000 { + compatible = "renesas,r9a09g057-ostm", "renesas,ostm"; + reg = <0x0 0x14000000 0x0 0x1000>; + interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>; + clocks = <&cpg CPG_MOD 0x45>; + resets = <&cpg 0x6f>; + power-domains = <&cpg>; + status = "disabled"; + }; + + ostm3: timer@14001000 { + compatible = "renesas,r9a09g057-ostm", "renesas,ostm"; + reg = <0x0 0x14001000 0x0 0x1000>; + interrupts = <GIC_SPI 20 IRQ_TYPE_EDGE_RISING>; + clocks = <&cpg CPG_MOD 0x46>; + resets = <&cpg 0x70>; + power-domains = <&cpg>; + status = "disabled"; + }; + + ostm4: timer@12c00000 { + compatible = "renesas,r9a09g057-ostm", "renesas,ostm"; + reg = <0x0 0x12c00000 0x0 0x1000>; + interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; + clocks = <&cpg CPG_MOD 0x47>; + resets = <&cpg 0x71>; + power-domains = <&cpg>; + status = "disabled"; + }; + + ostm5: timer@12c01000 { + compatible = "renesas,r9a09g057-ostm", "renesas,ostm"; + reg = <0x0 0x12c01000 0x0 0x1000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; + clocks = <&cpg CPG_MOD 0x48>; + resets = <&cpg 0x72>; + power-domains = <&cpg>; + status = "disabled"; + }; + + ostm6: timer@12c02000 { + compatible = "renesas,r9a09g057-ostm", "renesas,ostm"; + reg = <0x0 0x12c02000 0x0 0x1000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_EDGE_RISING>; + clocks = <&cpg CPG_MOD 0x49>; + resets = <&cpg 0x73>; + power-domains = <&cpg>; + status = "disabled"; + }; + + ostm7: timer@12c03000 { + compatible = "renesas,r9a09g057-ostm", "renesas,ostm"; + reg = <0x0 0x12c03000 0x0 0x1000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_EDGE_RISING>; + clocks = <&cpg CPG_MOD 0x4a>; + resets = <&cpg 0x74>; + power-domains = <&cpg>; + status = "disabled"; + }; + + wdt0: watchdog@11c00400 { + compatible = "renesas,r9a09g057-wdt"; + reg = <0 0x11c00400 0 0x400>; + clocks = <&cpg CPG_MOD 0x4b>, <&cpg CPG_MOD 0x4c>; + clock-names = "pclk", "oscclk"; + resets = <&cpg 0x75>; + power-domains = <&cpg>; + status = "disabled"; + }; + + wdt1: watchdog@14400000 { + compatible = "renesas,r9a09g057-wdt"; + reg = <0 0x14400000 0 0x400>; + clocks = <&cpg CPG_MOD 0x4d>, <&cpg CPG_MOD 0x4e>; + clock-names = "pclk", "oscclk"; + resets = <&cpg 0x76>; + power-domains = <&cpg>; + status = "disabled"; + }; + + wdt2: watchdog@13000000 { + compatible = "renesas,r9a09g057-wdt"; + reg = <0 0x13000000 0 0x400>; + clocks = <&cpg CPG_MOD 0x4f>, <&cpg CPG_MOD 0x50>; + clock-names = "pclk", "oscclk"; + resets = <&cpg 0x77>; + power-domains = <&cpg>; + status = "disabled"; + }; + + wdt3: watchdog@13000400 { + compatible = "renesas,r9a09g057-wdt"; + reg = <0 0x13000400 0 0x400>; + clocks = <&cpg CPG_MOD 0x51>, <&cpg CPG_MOD 0x52>; + clock-names = "pclk", "oscclk"; + resets = <&cpg 0x78>; + power-domains = <&cpg>; + status = "disabled"; + }; + + scif: serial@11c01400 { + compatible = "renesas,scif-r9a09g057"; + reg = <0 0x11c01400 0 0x400>; + interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 534 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 536 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 537 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "eri", "rxi", "txi", "bri", "dri", + "tei", "tei-dri", "rxi-edge", "txi-edge"; + clocks = <&cpg CPG_MOD 0x8f>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg 0x95>; + status = "disabled"; + }; + + i2c0: i2c@14400400 { + compatible = "renesas,riic-r9a09g057"; + reg = <0 0x14400400 0 0x400>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 507 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 506 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD 0x94>; + resets = <&cpg 0x98>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@14400800 { + compatible = "renesas,riic-r9a09g057"; + reg = <0 0x14400800 0 0x400>; + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 509 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 508 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD 0x95>; + resets = <&cpg 0x99>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@14400c00 { + compatible = "renesas,riic-r9a09g057"; + reg = <0 0x14400c00 0 0x400>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 511 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 510 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD 0x96>; + resets = <&cpg 0x9a>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@14401000 { + compatible = "renesas,riic-r9a09g057"; + reg = <0 0x14401000 0 0x400>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 513 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 512 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD 0x97>; + resets = <&cpg 0x9b>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@14401400 { + compatible = "renesas,riic-r9a09g057"; + reg = <0 0x14401400 0 0x400>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 515 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 514 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD 0x98>; + resets = <&cpg 0x9c>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@14401800 { + compatible = "renesas,riic-r9a09g057"; + reg = <0 0x14401800 0 0x400>; + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 517 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 516 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD 0x99>; + resets = <&cpg 0x9d>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@14401c00 { + compatible = "renesas,riic-r9a09g057"; + reg = <0 0x14401c00 0 0x400>; + interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 519 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 518 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD 0x9a>; + resets = <&cpg 0x9e>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c7: i2c@14402000 { + compatible = "renesas,riic-r9a09g057"; + reg = <0 0x14402000 0 0x400>; + interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 521 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 520 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD 0x9b>; + resets = <&cpg 0x9f>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c8: i2c@11c01000 { + compatible = "renesas,riic-r9a09g057"; + reg = <0 0x11c01000 0 0x400>; + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 523 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 522 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD 0x93>; + resets = <&cpg 0xa0>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + gic: interrupt-controller@14900000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x14900000 0 0x20000>, + <0x0 0x14940000 0 0x80000>; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; + }; + + sdhi0: mmc@15c00000 { + compatible = "renesas,sdhi-r9a09g057"; + reg = <0x0 0x15c00000 0 0x10000>; + interrupts = <GIC_SPI 735 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 736 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 0xa3>, <&cpg CPG_MOD 0xa5>, + <&cpg CPG_MOD 0xa4>, <&cpg CPG_MOD 0xa6>; + clock-names = "core", "clkh", "cd", "aclk"; + resets = <&cpg 0xa7>; + power-domains = <&cpg>; + status = "disabled"; + }; + + sdhi1: mmc@15c10000 { + compatible = "renesas,sdhi-r9a09g057"; + reg = <0x0 0x15c10000 0 0x10000>; + interrupts = <GIC_SPI 737 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 738 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 0xa7>, <&cpg CPG_MOD 0xa9>, + <&cpg CPG_MOD 0xa8>, <&cpg CPG_MOD 0xaa>; + clock-names = "core", "clkh", "cd", "aclk"; + resets = <&cpg 0xa8>; + power-domains = <&cpg>; + status = "disabled"; + }; + + sdhi2: mmc@15c20000 { + compatible = "renesas,sdhi-r9a09g057"; + reg = <0x0 0x15c20000 0 0x10000>; + interrupts = <GIC_SPI 739 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 740 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 0xab>, <&cpg CPG_MOD 0xad>, + <&cpg CPG_MOD 0xac>, <&cpg CPG_MOD 0xae>; + clock-names = "core", "clkh", "cd", "aclk"; + resets = <&cpg 0xa9>; + power-domains = <&cpg>; + status = "disabled"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt"; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts new file mode 100644 index 000000000000..4703da8e9cff --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts @@ -0,0 +1,256 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/V2H EVK board + * + * Copyright (C) 2024 Renesas Electronics Corp. + */ + +/dts-v1/; + +#include <dt-bindings/pinctrl/rzg2l-pinctrl.h> +#include <dt-bindings/gpio/gpio.h> +#include "r9a09g057.dtsi" + +/ { + model = "Renesas RZ/V2H EVK Board based on r9a09g057h44"; + compatible = "renesas,rzv2h-evk", "renesas,r9a09g057h44", "renesas,r9a09g057"; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + mmc1 = &sdhi1; + serial0 = &scif; + }; + + chosen { + bootargs = "ignore_loglevel"; + stdout-path = "serial0:115200n8"; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x1 0xF8000000>; + }; + + memory@240000000 { + device_type = "memory"; + reg = <0x2 0x40000000 0x2 0x00000000>; + }; + + reg_3p3v: regulator1 { + compatible = "regulator-fixed"; + + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vqmmc_sdhi1: regulator-vccq-sdhi1 { + compatible = "regulator-gpio"; + regulator-name = "SDHI1 VccQ"; + gpios = <&pinctrl RZG2L_GPIO(10, 2) GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios-states = <0>; + states = <3300000 0>, <1800000 1>; + }; +}; + +&audio_extal_clk { + clock-frequency = <22579200>; +}; + +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + clock-frequency = <400000>; + + status = "okay"; +}; + +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + clock-frequency = <400000>; + + status = "okay"; +}; + +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + clock-frequency = <400000>; + + status = "okay"; +}; + +&i2c3 { + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + clock-frequency = <400000>; + + status = "okay"; +}; + +&i2c6 { + pinctrl-0 = <&i2c6_pins>; + pinctrl-names = "default"; + clock-frequency = <400000>; + + status = "okay"; +}; + +&i2c7 { + pinctrl-0 = <&i2c7_pins>; + pinctrl-names = "default"; + clock-frequency = <400000>; + + status = "okay"; +}; + +&i2c8 { + pinctrl-0 = <&i2c8_pins>; + pinctrl-names = "default"; + clock-frequency = <400000>; + + status = "okay"; +}; + +&ostm0 { + status = "okay"; +}; + +&ostm1 { + status = "okay"; +}; + +&ostm2 { + status = "okay"; +}; + +&ostm3 { + status = "okay"; +}; + +&ostm4 { + status = "okay"; +}; + +&ostm5 { + status = "okay"; +}; + +&ostm6 { + status = "okay"; +}; + +&ostm7 { + status = "okay"; +}; + +&pinctrl { + i2c0_pins: i2c0 { + pinmux = <RZG2L_PORT_PINMUX(3, 0, 1)>, /* I2C0_SDA */ + <RZG2L_PORT_PINMUX(3, 1, 1)>; /* I2C0_SCL */ + }; + + i2c1_pins: i2c1 { + pinmux = <RZG2L_PORT_PINMUX(3, 2, 1)>, /* I2C1_SDA */ + <RZG2L_PORT_PINMUX(3, 3, 1)>; /* I2C1_SCL */ + }; + + i2c2_pins: i2c2 { + pinmux = <RZG2L_PORT_PINMUX(2, 0, 4)>, /* I2C2_SDA */ + <RZG2L_PORT_PINMUX(2, 1, 4)>; /* I2C2_SCL */ + }; + + i2c3_pins: i2c3 { + pinmux = <RZG2L_PORT_PINMUX(3, 6, 1)>, /* I2C3_SDA */ + <RZG2L_PORT_PINMUX(3, 7, 1)>; /* I2C3_SCL */ + }; + + i2c6_pins: i2c6 { + pinmux = <RZG2L_PORT_PINMUX(4, 4, 1)>, /* I2C6_SDA */ + <RZG2L_PORT_PINMUX(4, 5, 1)>; /* I2C6_SCL */ + }; + + i2c7_pins: i2c7 { + pinmux = <RZG2L_PORT_PINMUX(4, 6, 1)>, /* I2C7_SDA */ + <RZG2L_PORT_PINMUX(4, 7, 1)>; /* I2C7_SCL */ + }; + + i2c8_pins: i2c8 { + pinmux = <RZG2L_PORT_PINMUX(0, 6, 1)>, /* I2C8_SDA */ + <RZG2L_PORT_PINMUX(0, 7, 1)>; /* I2C8_SCL */ + }; + + scif_pins: scif { + pins = "SCIF_TXD", "SCIF_RXD"; + renesas,output-impedance = <1>; + }; + + sd1-pwr-en-hog { + gpio-hog; + gpios = <RZG2L_GPIO(10, 3) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "sd1_pwr_en"; + }; + + sdhi1_pins: sd1 { + sd1_dat_cmd { + pins = "SD1DAT0", "SD1DAT1", "SD1DAT2", "SD1DAT3", "SD1CMD"; + input-enable; + renesas,output-impedance = <3>; + slew-rate = <0>; + }; + + sd1_clk { + pins = "SD1CLK"; + renesas,output-impedance = <3>; + slew-rate = <0>; + }; + + sd1_cd { + pinmux = <RZG2L_PORT_PINMUX(9, 4, 14)>; /* SD1_CD */ + }; + }; +}; + +&qextal_clk { + clock-frequency = <24000000>; +}; + +&rtxin_clk { + clock-frequency = <32768>; +}; + +&scif { + pinctrl-0 = <&scif_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&sdhi1 { + pinctrl-0 = <&sdhi1_pins>; + pinctrl-1 = <&sdhi1_pins>; + pinctrl-names = "default", "state_uhs"; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <&vqmmc_sdhi1>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; + +&wdt1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi b/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi index b34855956ae0..63fa5cf1061b 100644 --- a/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi +++ b/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi @@ -131,9 +131,6 @@ &phyrst { status = "okay"; - usb0_vbus_otg: regulator-vbus { - regulator-name = "vbus"; - }; }; &scif0 { diff --git a/arch/arm64/boot/dts/renesas/rz-smarc-du-adv7513.dtsi b/arch/arm64/boot/dts/renesas/rz-smarc-du-adv7513.dtsi new file mode 100644 index 000000000000..36707576030d --- /dev/null +++ b/arch/arm64/boot/dts/renesas/rz-smarc-du-adv7513.dtsi @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Common Device Tree for the RZ/G2UL SMARC EVK (and alike EVKs) with + * ADV7513 transmitter connected to DU enabled. + * + * Copyright (C) 2024 Renesas Electronics Corp. + */ + +&{/} { + hdmi-out { + compatible = "hdmi-connector"; + type = "d"; + + port { + hdmi_con_out: endpoint { + remote-endpoint = <&adv7513_out>; + }; + }; + }; +}; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + + status = "okay"; + + ports { + port@0 { + du_out_rgb: endpoint { + remote-endpoint = <&adv7513_in>; + }; + }; + }; +}; + +&ADV7513_PARENT_I2C { + #address-cells = <1>; + #size-cells = <0>; + + adv7513: adv7513@39 { + compatible = "adi,adv7513"; + reg = <0x39>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + + avdd-supply = <®_1p8v>; + dvdd-supply = <®_1p8v>; + pvdd-supply = <®_1p8v>; + dvdd-3v-supply = <®_3p3v>; + bgvdd-supply = <®_1p8v>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adv7513_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + + port@1 { + reg = <1>; + + adv7513_out: endpoint { + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi index 18c526c7a4cf..e9f244c33d55 100644 --- a/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi @@ -143,6 +143,12 @@ <RZG2L_PORT_PINMUX(45, 3, 1)>; /* RXD */ }; + ssi1_pins: ssi1 { + pinmux = <RZG2L_PORT_PINMUX(46, 0, 1)>, /* BCK */ + <RZG2L_PORT_PINMUX(46, 1, 1)>, /* RCK */ + <RZG2L_PORT_PINMUX(46, 2, 1)>; /* TXD */ + }; + usb0_pins: usb0 { pinmux = <RZG2L_PORT_PINMUX(4, 0, 1)>, /* VBUS */ <RZG2L_PORT_PINMUX(5, 0, 1)>, /* OVC */ diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi index 4409c47239b9..83f5642d0d35 100644 --- a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi @@ -180,41 +180,63 @@ }; eth0_pins: eth0 { - pinmux = <RZG2L_PORT_PINMUX(28, 1, 1)>, /* ET0_LINKSTA */ - <RZG2L_PORT_PINMUX(27, 1, 1)>, /* ET0_MDC */ - <RZG2L_PORT_PINMUX(28, 0, 1)>, /* ET0_MDIO */ - <RZG2L_PORT_PINMUX(20, 0, 1)>, /* ET0_TXC */ - <RZG2L_PORT_PINMUX(20, 1, 1)>, /* ET0_TX_CTL */ - <RZG2L_PORT_PINMUX(20, 2, 1)>, /* ET0_TXD0 */ - <RZG2L_PORT_PINMUX(21, 0, 1)>, /* ET0_TXD1 */ - <RZG2L_PORT_PINMUX(21, 1, 1)>, /* ET0_TXD2 */ - <RZG2L_PORT_PINMUX(22, 0, 1)>, /* ET0_TXD3 */ - <RZG2L_PORT_PINMUX(24, 0, 1)>, /* ET0_RXC */ - <RZG2L_PORT_PINMUX(24, 1, 1)>, /* ET0_RX_CTL */ - <RZG2L_PORT_PINMUX(25, 0, 1)>, /* ET0_RXD0 */ - <RZG2L_PORT_PINMUX(25, 1, 1)>, /* ET0_RXD1 */ - <RZG2L_PORT_PINMUX(26, 0, 1)>, /* ET0_RXD2 */ - <RZG2L_PORT_PINMUX(26, 1, 1)>, /* ET0_RXD3 */ - <RZG2L_PORT_PINMUX(1, 0, 1)>; /* IRQ2 */ + txc { + pinmux = <RZG2L_PORT_PINMUX(20, 0, 1)>; /* ET0_TXC */ + power-source = <1800>; + output-enable; + }; + + mux { + pinmux = <RZG2L_PORT_PINMUX(28, 1, 1)>, /* ET0_LINKSTA */ + <RZG2L_PORT_PINMUX(27, 1, 1)>, /* ET0_MDC */ + <RZG2L_PORT_PINMUX(28, 0, 1)>, /* ET0_MDIO */ + <RZG2L_PORT_PINMUX(20, 1, 1)>, /* ET0_TX_CTL */ + <RZG2L_PORT_PINMUX(20, 2, 1)>, /* ET0_TXD0 */ + <RZG2L_PORT_PINMUX(21, 0, 1)>, /* ET0_TXD1 */ + <RZG2L_PORT_PINMUX(21, 1, 1)>, /* ET0_TXD2 */ + <RZG2L_PORT_PINMUX(22, 0, 1)>, /* ET0_TXD3 */ + <RZG2L_PORT_PINMUX(24, 0, 1)>, /* ET0_RXC */ + <RZG2L_PORT_PINMUX(24, 1, 1)>, /* ET0_RX_CTL */ + <RZG2L_PORT_PINMUX(25, 0, 1)>, /* ET0_RXD0 */ + <RZG2L_PORT_PINMUX(25, 1, 1)>, /* ET0_RXD1 */ + <RZG2L_PORT_PINMUX(26, 0, 1)>, /* ET0_RXD2 */ + <RZG2L_PORT_PINMUX(26, 1, 1)>; /* ET0_RXD3 */ + power-source = <1800>; + }; + + irq { + pinmux = <RZG2L_PORT_PINMUX(1, 0, 1)>; /* IRQ2 */ + }; }; eth1_pins: eth1 { - pinmux = <RZG2L_PORT_PINMUX(37, 2, 1)>, /* ET1_LINKSTA */ - <RZG2L_PORT_PINMUX(37, 0, 1)>, /* ET1_MDC */ - <RZG2L_PORT_PINMUX(37, 1, 1)>, /* ET1_MDIO */ - <RZG2L_PORT_PINMUX(29, 0, 1)>, /* ET1_TXC */ - <RZG2L_PORT_PINMUX(29, 1, 1)>, /* ET1_TX_CTL */ - <RZG2L_PORT_PINMUX(30, 0, 1)>, /* ET1_TXD0 */ - <RZG2L_PORT_PINMUX(30, 1, 1)>, /* ET1_TXD1 */ - <RZG2L_PORT_PINMUX(31, 0, 1)>, /* ET1_TXD2 */ - <RZG2L_PORT_PINMUX(31, 1, 1)>, /* ET1_TXD3 */ - <RZG2L_PORT_PINMUX(33, 1, 1)>, /* ET1_RXC */ - <RZG2L_PORT_PINMUX(34, 0, 1)>, /* ET1_RX_CTL */ - <RZG2L_PORT_PINMUX(34, 1, 1)>, /* ET1_RXD0 */ - <RZG2L_PORT_PINMUX(35, 0, 1)>, /* ET1_RXD1 */ - <RZG2L_PORT_PINMUX(35, 1, 1)>, /* ET1_RXD2 */ - <RZG2L_PORT_PINMUX(36, 0, 1)>, /* ET1_RXD3 */ - <RZG2L_PORT_PINMUX(1, 1, 1)>; /* IRQ3 */ + txc { + pinmux = <RZG2L_PORT_PINMUX(29, 0, 1)>; /* ET1_TXC */ + power-source = <1800>; + output-enable; + }; + + mux { + pinmux = <RZG2L_PORT_PINMUX(37, 2, 1)>, /* ET1_LINKSTA */ + <RZG2L_PORT_PINMUX(37, 0, 1)>, /* ET1_MDC */ + <RZG2L_PORT_PINMUX(37, 1, 1)>, /* ET1_MDIO */ + <RZG2L_PORT_PINMUX(29, 1, 1)>, /* ET1_TX_CTL */ + <RZG2L_PORT_PINMUX(30, 0, 1)>, /* ET1_TXD0 */ + <RZG2L_PORT_PINMUX(30, 1, 1)>, /* ET1_TXD1 */ + <RZG2L_PORT_PINMUX(31, 0, 1)>, /* ET1_TXD2 */ + <RZG2L_PORT_PINMUX(31, 1, 1)>, /* ET1_TXD3 */ + <RZG2L_PORT_PINMUX(33, 1, 1)>, /* ET1_RXC */ + <RZG2L_PORT_PINMUX(34, 0, 1)>, /* ET1_RX_CTL */ + <RZG2L_PORT_PINMUX(34, 1, 1)>, /* ET1_RXD0 */ + <RZG2L_PORT_PINMUX(35, 0, 1)>, /* ET1_RXD1 */ + <RZG2L_PORT_PINMUX(35, 1, 1)>, /* ET1_RXD2 */ + <RZG2L_PORT_PINMUX(36, 0, 1)>; /* ET1_RXD3 */ + power-source = <1800>; + }; + + irq { + pinmux = <RZG2L_PORT_PINMUX(1, 1, 1)>; /* IRQ3 */ + }; }; gpio-sd0-pwr-en-hog { diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi index 887dffe14910..ee3d96fdb616 100644 --- a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi @@ -30,6 +30,12 @@ }; }; }; + + sound_card { + compatible = "audio-graph-card"; + label = "HDMI-Audio"; + dais = <&i2s2_port>; + }; }; &cpu_dai { @@ -88,6 +94,13 @@ remote-endpoint = <&hdmi_con_out>; }; }; + + port@2 { + reg = <2>; + codec_endpoint: endpoint { + remote-endpoint = <&i2s2_cpu_endpoint>; + }; + }; }; }; }; @@ -170,6 +183,23 @@ status = "okay"; }; +&ssi1 { + pinctrl-0 = <&ssi1_pins>; + pinctrl-names = "default"; + + status = "okay"; + + i2s2_port: port { + i2s2_cpu_endpoint: endpoint { + remote-endpoint = <&codec_endpoint>; + dai-format = "i2s"; + + bitclock-master = <&i2s2_cpu_endpoint>; + frame-master = <&i2s2_cpu_endpoint>; + }; + }; +}; + &vccq_sdhi1 { gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi index 5e4209d6fb42..b4ef5ea8a9e3 100644 --- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi @@ -128,22 +128,33 @@ &pinctrl { eth0_pins: eth0 { - pinmux = <RZG2L_PORT_PINMUX(28, 1, 1)>, /* ET0_LINKSTA */ - <RZG2L_PORT_PINMUX(27, 1, 1)>, /* ET0_MDC */ - <RZG2L_PORT_PINMUX(28, 0, 1)>, /* ET0_MDIO */ - <RZG2L_PORT_PINMUX(20, 0, 1)>, /* ET0_TXC */ - <RZG2L_PORT_PINMUX(20, 1, 1)>, /* ET0_TX_CTL */ - <RZG2L_PORT_PINMUX(20, 2, 1)>, /* ET0_TXD0 */ - <RZG2L_PORT_PINMUX(21, 0, 1)>, /* ET0_TXD1 */ - <RZG2L_PORT_PINMUX(21, 1, 1)>, /* ET0_TXD2 */ - <RZG2L_PORT_PINMUX(22, 0, 1)>, /* ET0_TXD3 */ - <RZG2L_PORT_PINMUX(24, 0, 1)>, /* ET0_RXC */ - <RZG2L_PORT_PINMUX(24, 1, 1)>, /* ET0_RX_CTL */ - <RZG2L_PORT_PINMUX(25, 0, 1)>, /* ET0_RXD0 */ - <RZG2L_PORT_PINMUX(25, 1, 1)>, /* ET0_RXD1 */ - <RZG2L_PORT_PINMUX(26, 0, 1)>, /* ET0_RXD2 */ - <RZG2L_PORT_PINMUX(26, 1, 1)>, /* ET0_RXD3 */ - <RZG2L_PORT_PINMUX(0, 0, 1)>; /* IRQ0 */ + txc { + pinmux = <RZG2L_PORT_PINMUX(20, 0, 1)>; /* ET0_TXC */ + power-source = <1800>; + output-enable; + }; + + mux { + pinmux = <RZG2L_PORT_PINMUX(28, 1, 1)>, /* ET0_LINKSTA */ + <RZG2L_PORT_PINMUX(27, 1, 1)>, /* ET0_MDC */ + <RZG2L_PORT_PINMUX(28, 0, 1)>, /* ET0_MDIO */ + <RZG2L_PORT_PINMUX(20, 1, 1)>, /* ET0_TX_CTL */ + <RZG2L_PORT_PINMUX(20, 2, 1)>, /* ET0_TXD0 */ + <RZG2L_PORT_PINMUX(21, 0, 1)>, /* ET0_TXD1 */ + <RZG2L_PORT_PINMUX(21, 1, 1)>, /* ET0_TXD2 */ + <RZG2L_PORT_PINMUX(22, 0, 1)>, /* ET0_TXD3 */ + <RZG2L_PORT_PINMUX(24, 0, 1)>, /* ET0_RXC */ + <RZG2L_PORT_PINMUX(24, 1, 1)>, /* ET0_RX_CTL */ + <RZG2L_PORT_PINMUX(25, 0, 1)>, /* ET0_RXD0 */ + <RZG2L_PORT_PINMUX(25, 1, 1)>, /* ET0_RXD1 */ + <RZG2L_PORT_PINMUX(26, 0, 1)>, /* ET0_RXD2 */ + <RZG2L_PORT_PINMUX(26, 1, 1)>; /* ET0_RXD3 */ + power-source = <1800>; + }; + + irq { + pinmux = <RZG2L_PORT_PINMUX(0, 0, 1)>; /* IRQ0 */ + }; }; gpio-sd0-pwr-en-hog { diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi index f21508640b6e..377849cbb462 100644 --- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi @@ -33,6 +33,16 @@ }; }; }; + +#if (SW_I2S0_I2S1) + /delete-node/ sound; + + sound_card { + compatible = "audio-graph-card"; + label = "HDMI-Audio"; + dais = <&i2s2_port>; + }; +#endif }; #if (SW_SCIF_CAN || SW_RSPI_CAN) @@ -48,9 +58,11 @@ }; #endif +#if (!SW_I2S0_I2S1) &cpu_dai { sound-dai = <&ssi0>; }; +#endif &dsi { status = "okay"; @@ -104,6 +116,15 @@ remote-endpoint = <&hdmi_con_out>; }; }; + +#if (SW_I2S0_I2S1) + port@2 { + reg = <2>; + codec_endpoint: endpoint { + remote-endpoint = <&i2s2_cpu_endpoint>; + }; + }; +#endif }; }; }; @@ -177,6 +198,18 @@ pinctrl-names = "default"; status = "okay"; + +#if (SW_I2S0_I2S1) + i2s2_port: port { + i2s2_cpu_endpoint: endpoint { + remote-endpoint = <&codec_endpoint>; + dai-format = "i2s"; + + bitclock-master = <&i2s2_cpu_endpoint>; + frame-master = <&i2s2_cpu_endpoint>; + }; + }; +#endif }; #if (SW_RSPI_CAN) diff --git a/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi index 97cdad2a12e2..79443fb3f581 100644 --- a/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi @@ -142,41 +142,63 @@ }; eth0_pins: eth0 { - pinmux = <RZG2L_PORT_PINMUX(4, 5, 1)>, /* ET0_LINKSTA */ - <RZG2L_PORT_PINMUX(4, 3, 1)>, /* ET0_MDC */ - <RZG2L_PORT_PINMUX(4, 4, 1)>, /* ET0_MDIO */ - <RZG2L_PORT_PINMUX(1, 0, 1)>, /* ET0_TXC */ - <RZG2L_PORT_PINMUX(1, 1, 1)>, /* ET0_TX_CTL */ - <RZG2L_PORT_PINMUX(1, 2, 1)>, /* ET0_TXD0 */ - <RZG2L_PORT_PINMUX(1, 3, 1)>, /* ET0_TXD1 */ - <RZG2L_PORT_PINMUX(1, 4, 1)>, /* ET0_TXD2 */ - <RZG2L_PORT_PINMUX(2, 0, 1)>, /* ET0_TXD3 */ - <RZG2L_PORT_PINMUX(3, 0, 1)>, /* ET0_RXC */ - <RZG2L_PORT_PINMUX(3, 1, 1)>, /* ET0_RX_CTL */ - <RZG2L_PORT_PINMUX(3, 2, 1)>, /* ET0_RXD0 */ - <RZG2L_PORT_PINMUX(3, 3, 1)>, /* ET0_RXD1 */ - <RZG2L_PORT_PINMUX(4, 0, 1)>, /* ET0_RXD2 */ - <RZG2L_PORT_PINMUX(4, 1, 1)>, /* ET0_RXD3 */ - <RZG2L_PORT_PINMUX(5, 1, 7)>; /* IRQ2 */ + txc { + pinmux = <RZG2L_PORT_PINMUX(1, 0, 1)>; /* ET0_TXC */ + power-source = <1800>; + output-enable; + }; + + mux { + pinmux = <RZG2L_PORT_PINMUX(4, 5, 1)>, /* ET0_LINKSTA */ + <RZG2L_PORT_PINMUX(4, 3, 1)>, /* ET0_MDC */ + <RZG2L_PORT_PINMUX(4, 4, 1)>, /* ET0_MDIO */ + <RZG2L_PORT_PINMUX(1, 1, 1)>, /* ET0_TX_CTL */ + <RZG2L_PORT_PINMUX(1, 2, 1)>, /* ET0_TXD0 */ + <RZG2L_PORT_PINMUX(1, 3, 1)>, /* ET0_TXD1 */ + <RZG2L_PORT_PINMUX(1, 4, 1)>, /* ET0_TXD2 */ + <RZG2L_PORT_PINMUX(2, 0, 1)>, /* ET0_TXD3 */ + <RZG2L_PORT_PINMUX(3, 0, 1)>, /* ET0_RXC */ + <RZG2L_PORT_PINMUX(3, 1, 1)>, /* ET0_RX_CTL */ + <RZG2L_PORT_PINMUX(3, 2, 1)>, /* ET0_RXD0 */ + <RZG2L_PORT_PINMUX(3, 3, 1)>, /* ET0_RXD1 */ + <RZG2L_PORT_PINMUX(4, 0, 1)>, /* ET0_RXD2 */ + <RZG2L_PORT_PINMUX(4, 1, 1)>; /* ET0_RXD3 */ + power-source = <1800>; + }; + + irq { + pinmux = <RZG2L_PORT_PINMUX(5, 1, 7)>; /* IRQ2 */ + }; }; eth1_pins: eth1 { - pinmux = <RZG2L_PORT_PINMUX(10, 4, 1)>, /* ET1_LINKSTA */ - <RZG2L_PORT_PINMUX(10, 2, 1)>, /* ET1_MDC */ - <RZG2L_PORT_PINMUX(10, 3, 1)>, /* ET1_MDIO */ - <RZG2L_PORT_PINMUX(7, 0, 1)>, /* ET1_TXC */ - <RZG2L_PORT_PINMUX(7, 1, 1)>, /* ET1_TX_CTL */ - <RZG2L_PORT_PINMUX(7, 2, 1)>, /* ET1_TXD0 */ - <RZG2L_PORT_PINMUX(7, 3, 1)>, /* ET1_TXD1 */ - <RZG2L_PORT_PINMUX(7, 4, 1)>, /* ET1_TXD2 */ - <RZG2L_PORT_PINMUX(8, 0, 1)>, /* ET1_TXD3 */ - <RZG2L_PORT_PINMUX(8, 4, 1)>, /* ET1_RXC */ - <RZG2L_PORT_PINMUX(9, 0, 1)>, /* ET1_RX_CTL */ - <RZG2L_PORT_PINMUX(9, 1, 1)>, /* ET1_RXD0 */ - <RZG2L_PORT_PINMUX(9, 2, 1)>, /* ET1_RXD1 */ - <RZG2L_PORT_PINMUX(9, 3, 1)>, /* ET1_RXD2 */ - <RZG2L_PORT_PINMUX(10, 0, 1)>, /* ET1_RXD3 */ - <RZG2L_PORT_PINMUX(18, 5, 1)>; /* IRQ7 */ + txc { + pinmux = <RZG2L_PORT_PINMUX(7, 0, 1)>; /* ET1_TXC */ + power-source = <1800>; + output-enable; + }; + + mux { + pinmux = <RZG2L_PORT_PINMUX(10, 4, 1)>, /* ET1_LINKSTA */ + <RZG2L_PORT_PINMUX(10, 2, 1)>, /* ET1_MDC */ + <RZG2L_PORT_PINMUX(10, 3, 1)>, /* ET1_MDIO */ + <RZG2L_PORT_PINMUX(7, 1, 1)>, /* ET1_TX_CTL */ + <RZG2L_PORT_PINMUX(7, 2, 1)>, /* ET1_TXD0 */ + <RZG2L_PORT_PINMUX(7, 3, 1)>, /* ET1_TXD1 */ + <RZG2L_PORT_PINMUX(7, 4, 1)>, /* ET1_TXD2 */ + <RZG2L_PORT_PINMUX(8, 0, 1)>, /* ET1_TXD3 */ + <RZG2L_PORT_PINMUX(8, 4, 1)>, /* ET1_RXC */ + <RZG2L_PORT_PINMUX(9, 0, 1)>, /* ET1_RX_CTL */ + <RZG2L_PORT_PINMUX(9, 1, 1)>, /* ET1_RXD0 */ + <RZG2L_PORT_PINMUX(9, 2, 1)>, /* ET1_RXD1 */ + <RZG2L_PORT_PINMUX(9, 3, 1)>, /* ET1_RXD2 */ + <RZG2L_PORT_PINMUX(10, 0, 1)>; /* ET1_RXD3 */ + power-source = <1800>; + }; + + irq { + pinmux = <RZG2L_PORT_PINMUX(18, 5, 1)>; /* IRQ7 */ + }; }; sdhi0_emmc_pins: sd0emmc { diff --git a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi index 8a3d302f1535..21bfa4e03972 100644 --- a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi @@ -32,6 +32,7 @@ compatible = "renesas,rzg3s-smarcm", "renesas,r9a08g045s33", "renesas,r9a08g045"; aliases { + i2c1 = &i2c1; mmc0 = &sdhi0; #if SW_CONFIG3 == SW_OFF mmc2 = &sdhi2; @@ -150,6 +151,10 @@ clock-frequency = <24000000>; }; +&i2c1 { + status = "okay"; +}; + #if SW_CONFIG2 == SW_ON /* SD0 slot */ &sdhi0 { diff --git a/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi index deb2ad37bb2e..7945d44e6ee1 100644 --- a/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi @@ -11,6 +11,7 @@ / { aliases { + i2c0 = &i2c0; serial0 = &scif0; mmc1 = &sdhi1; }; @@ -66,6 +67,12 @@ }; }; +&i2c0 { + status = "okay"; + + clock-frequency = <1000000>; +}; + &pinctrl { key-1-gpio-hog { gpio-hog; diff --git a/arch/arm64/boot/dts/renesas/white-hawk-cpu-common.dtsi b/arch/arm64/boot/dts/renesas/white-hawk-cpu-common.dtsi index 80496fb3d476..3845b413bd24 100644 --- a/arch/arm64/boot/dts/renesas/white-hawk-cpu-common.dtsi +++ b/arch/arm64/boot/dts/renesas/white-hawk-cpu-common.dtsi @@ -117,6 +117,12 @@ }; }; + pcie_clk: clk-9fgv0841-pci { + compatible = "fixed-clock"; + clock-frequency = <100000000>; + #clock-cells = <0>; + }; + reg_1p2v: regulator-1p2v { compatible = "regulator-fixed"; regulator-name = "fixed-1.2V"; @@ -288,6 +294,18 @@ status = "okay"; }; +&pcie0_clkref { + compatible = "gpio-gate-clock"; + clocks = <&pcie_clk>; + enable-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; + /delete-property/ clock-frequency; +}; + +&pciec0 { + reset-gpio = <&io_expander_a 0 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + &pfc { pinctrl-0 = <&scif_clk_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index fda1b980eb4b..09423070c992 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-ctouch2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-ctouch2-of10.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-edimm2.2.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-firefly-jd4-core-mb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-ringneck-haikou.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb @@ -20,6 +21,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c-plus.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s-plus.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus-lts.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb @@ -81,6 +83,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353ps.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353v.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353vs.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg503.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-odroid-m1s.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-orangepi-3b-v1.1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-orangepi-3b-v2.1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb @@ -102,6 +105,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-blade.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-model-a.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-box-demo.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lckfb-tspi.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lubancat-1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb @@ -118,9 +122,11 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-roc-pc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3b.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-display-vz.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-io-expander.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-armsom-sige7.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-coolpi-cm5-evb.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-coolpi-cm5-genbook.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-wifi.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-io.dtb @@ -128,6 +134,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-friendlyelec-cm3588-nas.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6-lts.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-ok3588-c.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-plus.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-quartzpro64.dtb @@ -139,9 +146,11 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-haikou.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-toybrick-x0.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-turing-rk1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-coolpi-4b.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-gameforce-ace.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6s.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6c.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-odroid-m2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5.dtb diff --git a/arch/arm64/boot/dts/rockchip/px30-firefly-jd4-core-mb.dts b/arch/arm64/boot/dts/rockchip/px30-firefly-jd4-core-mb.dts new file mode 100644 index 000000000000..d03e6aef54dc --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/px30-firefly-jd4-core-mb.dts @@ -0,0 +1,179 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include "px30-firefly-jd4-core.dtsi" + +/ { + compatible = "firefly,px30-jd4-core-mb", "firefly,px30-jd4-core", + "rockchip,px30"; + model = "Firefly Core-PX30-JD4 on MB-JD4-PX30 baseboard"; + + aliases { + ethernet0 = &gmac; + mmc0 = &sdmmc; + mmc1 = &sdio; + mmc2 = &emmc; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + dc_12v: dc-12v-regulator { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 2>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1500000>; + poll-interval = <100>; + + button-recovery { + label = "Recovery"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <18000>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&blue_led>, <&green_led>; + + blue-led { + color = <LED_COLOR_ID_BLUE>; + default-state = "on"; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; + label = "px30-mb-jd4:blue:work"; + linux,default-trigger = "heartbeat"; + }; + + green-led { + color = <LED_COLOR_ID_GREEN>; + default-state = "on"; + function = LED_FUNCTION_POWER; + gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>; + label = "px30-mb-jd4:blue:diy"; + linux,default-trigger = "default-on"; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO3_A4 */ + }; + + vcc5v0_baseboard: vcc5v0-baseboard-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_baseboard"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; +}; + +&gmac { + clock_in_out = "output"; + phy-supply = <&vcc_rmii>; + snps,reset-gpio = <&gpio2 13 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 50000 50000>; + status = "okay"; +}; + +&pinctrl { + leds { + blue_led: blue-led { + rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + green_led: green-led { + rockchip,pins = <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = + <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <800>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&sdio { + bus-width = <4>; + cap-sd-highspeed; + keep-power-in-suspend; + non-removable; + mmc-pwrseq = <&sdio_pwrseq>; + sd-uhs-sdr104; + status = "okay"; +}; + +&u2phy { + status = "okay"; + + u2phy_host: host-port { + status = "okay"; + }; + + u2phy_otg: otg-port { + status = "okay"; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2m1_xfer>; + status = "okay"; +}; + +&usb20_otg { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/px30-firefly-jd4-core.dtsi b/arch/arm64/boot/dts/rockchip/px30-firefly-jd4-core.dtsi new file mode 100644 index 000000000000..f18d7eb9a9c7 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/px30-firefly-jd4-core.dtsi @@ -0,0 +1,320 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "px30.dtsi" + +/ { + compatible = "firefly,px30-jd4-core", "rockchip,px30"; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + pinctrl-0 = <&emmc_reset>; + pinctrl-names = "default"; + reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_baseboard>; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + non-removable; + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v0>; + vqmmc-supply = <&vccio_flash>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_log>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <0>; + clock-output-names = "xin32k"; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc5v0_sys>; + + regulators { + vdd_log: DCDC_REG1 { + regulator-name = "vdd_log"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v0: vcc_rmii: DCDC_REG4 { + regulator-name = "vcc_3v0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_sys: DCDC_REG5 { + regulator-name = "vcc3v3_sys"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_1v0: LDO_REG1 { + regulator-name = "vcc_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_1v8: vccio_flash: vccio_sdio: LDO_REG2 { + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_1v0: LDO_REG3 { + regulator-name = "vdd_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc3v0_pmu: LDO_REG4 { + regulator-name = "vcc3v0_pmu"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_sd: LDO_REG6 { + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc2v8_dvp: LDO_REG7 { + regulator-name = "vcc2v8_dvp"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <2800000>; + }; + }; + + vcc1v8_dvp: LDO_REG8 { + regulator-name = "vcc1v8_dvp"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v5_dvp: LDO_REG9 { + regulator-name = "vcc1v5_dvp"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcc3v3_lcd: SWITCH_REG1 { + regulator-name = "vcc3v3_lcd"; + regulator-boot-on; + }; + + vcc5v0_host: SWITCH_REG2 { + regulator-name = "vcc5v0_host"; + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +&io_domains { + vccio1-supply = <&vccio_sdio>; + vccio2-supply = <&vccio_sd>; + vccio3-supply = <&vcc_3v0>; + vccio4-supply = <&vcc3v0_pmu>; + vccio5-supply = <&vcc_3v0>; + vccio6-supply = <&vccio_flash>; + status = "okay"; +}; + +&pinctrl { + emmc { + emmc_reset: emmc-reset { + rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int: pmic_int { + rockchip,pins = + <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc3v0_pmu>; + pmuio2-supply = <&vcc3v0_pmu>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_1v8>; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s-plus.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s-plus.dts new file mode 100644 index 000000000000..cb81ba3f23ff --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s-plus.dts @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * (C) Copyright 2018 FriendlyElec Computer Tech. Co., Ltd. + * (http://www.friendlyarm.com) + * + * (C) Copyright 2016 Rockchip Electronics Co., Ltd + */ + +/dts-v1/; +#include "rk3328-nanopi-r2s.dts" + +/ { + compatible = "friendlyarm,nanopi-r2s-plus", "rockchip,rk3328"; + model = "FriendlyElec NanoPi R2S Plus"; + + aliases { + mmc1 = &emmc; + }; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + mmc-hs200-1_8v; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + supports-emmc; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index b01efd6d042c..16b4faa22e4f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -910,6 +910,8 @@ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; max-frequency = <150000000>; + resets = <&cru SRST_MMC0>; + reset-names = "reset"; status = "disabled"; }; @@ -922,6 +924,8 @@ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; max-frequency = <150000000>; + resets = <&cru SRST_SDIO>; + reset-names = "reset"; status = "disabled"; }; @@ -934,6 +938,8 @@ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; max-frequency = <150000000>; + resets = <&cru SRST_EMMC>; + reset-names = "reset"; status = "disabled"; }; @@ -1036,6 +1042,20 @@ status = "disabled"; }; + sdmmc_ext: mmc@ff5f0000 { + compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xff5f0000 0x0 0x4000>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_SDMMC_EXT>, <&cru SCLK_SDMMC_EXT>, + <&cru SCLK_SDMMC_EXT_DRV>, <&cru SCLK_SDMMC_EXT_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <150000000>; + resets = <&cru SRST_SDMMCEXT>; + reset-names = "reset"; + status = "disabled"; + }; + usbdrd3: usb@ff600000 { compatible = "rockchip,rk3328-dwc3", "snps,dwc3"; reg = <0x0 0xff600000 0x0 0x100000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-base.dtsi new file mode 100644 index 000000000000..9d5f5b083e3c --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-base.dtsi @@ -0,0 +1,3019 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd + */ + +#include <dt-bindings/clock/rk3399-cru.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/power/rk3399-power.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + compatible = "rockchip,rk3399"; + + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + gpio4 = &gpio4; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + spi0 = &spi0; + spi1 = &spi1; + spi2 = &spi2; + spi3 = &spi3; + spi4 = &spi4; + spi5 = &spi5; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { /* Cortex-A53 */ + core0 { + cpu = <&cpu_l0>; + }; + core1 { + cpu = <&cpu_l1>; + }; + core2 { + cpu = <&cpu_l2>; + }; + core3 { + cpu = <&cpu_l3>; + }; + }; + + cluster1 { /* Cortex-A72 */ + core0 { + cpu = <&cpu_b0>; + }; + core1 { + cpu = <&cpu_b1>; + }; + }; + }; + + cpu_l0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x0>; + enable-method = "psci"; + capacity-dmips-mhz = <485>; + clocks = <&cru ARMCLKL>; + #cooling-cells = <2>; /* min followed by max */ + dynamic-power-coefficient = <100>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_cache_l>; + }; + + cpu_l1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + enable-method = "psci"; + capacity-dmips-mhz = <485>; + clocks = <&cru ARMCLKL>; + #cooling-cells = <2>; /* min followed by max */ + dynamic-power-coefficient = <100>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_cache_l>; + }; + + cpu_l2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x2>; + enable-method = "psci"; + capacity-dmips-mhz = <485>; + clocks = <&cru ARMCLKL>; + #cooling-cells = <2>; /* min followed by max */ + dynamic-power-coefficient = <100>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_cache_l>; + }; + + cpu_l3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x3>; + enable-method = "psci"; + capacity-dmips-mhz = <485>; + clocks = <&cru ARMCLKL>; + #cooling-cells = <2>; /* min followed by max */ + dynamic-power-coefficient = <100>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_cache_l>; + }; + + cpu_b0: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x0 0x100>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + clocks = <&cru ARMCLKB>; + #cooling-cells = <2>; /* min followed by max */ + dynamic-power-coefficient = <436>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_cache_b>; + + thermal-idle { + #cooling-cells = <2>; + duration-us = <10000>; + exit-latency-us = <500>; + }; + }; + + cpu_b1: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x0 0x101>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + clocks = <&cru ARMCLKB>; + #cooling-cells = <2>; /* min followed by max */ + dynamic-power-coefficient = <436>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_cache_b>; + + thermal-idle { + #cooling-cells = <2>; + duration-us = <10000>; + exit-latency-us = <500>; + }; + }; + + l2_cache_l: l2-cache-cluster0 { + compatible = "cache"; + cache-level = <2>; + cache-unified; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; + }; + + l2_cache_b: l2-cache-cluster1 { + compatible = "cache"; + cache-level = <2>; + cache-unified; + cache-size = <0x100000>; + cache-line-size = <64>; + cache-sets = <1024>; + }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP: cpu-sleep { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <120>; + exit-latency-us = <250>; + min-residency-us = <900>; + }; + + CLUSTER_SLEEP: cluster-sleep { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x1010000>; + entry-latency-us = <400>; + exit-latency-us = <500>; + min-residency-us = <2000>; + }; + }; + }; + + display-subsystem { + compatible = "rockchip,display-subsystem"; + ports = <&vopl_out>, <&vopb_out>; + }; + + dmc: memory-controller { + compatible = "rockchip,rk3399-dmc"; + rockchip,pmu = <&pmugrf>; + devfreq-events = <&dfi>; + clocks = <&cru SCLK_DDRC>; + clock-names = "dmc_clk"; + status = "disabled"; + }; + + pmu_a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster0>; + }; + + pmu_a72 { + compatible = "arm,cortex-a72-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster1>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>; + arm,no-tick-in-suspend; + }; + + xin24m: xin24m { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xin24m"; + #clock-cells = <0>; + }; + + pcie0: pcie@f8000000 { + compatible = "rockchip,rk3399-pcie"; + reg = <0x0 0xf8000000 0x0 0x2000000>, + <0x0 0xfd000000 0x0 0x1000000>; + reg-names = "axi-base", "apb-base"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + aspm-no-l0s; + bus-range = <0x0 0x1f>; + clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>, + <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>; + clock-names = "aclk", "aclk-perf", + "hclk", "pm"; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "sys", "legacy", "client"; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie0_intc 0>, + <0 0 0 2 &pcie0_intc 1>, + <0 0 0 3 &pcie0_intc 2>, + <0 0 0 4 &pcie0_intc 3>; + max-link-speed = <1>; + msi-map = <0x0 &its 0x0 0x1000>; + phys = <&pcie_phy 0>, <&pcie_phy 1>, + <&pcie_phy 2>, <&pcie_phy 3>; + phy-names = "pcie-phy-0", "pcie-phy-1", + "pcie-phy-2", "pcie-phy-3"; + ranges = <0x82000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000>, + <0x81000000 0x0 0xfbe00000 0x0 0xfbe00000 0x0 0x100000>; + resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>, + <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>, + <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, + <&cru SRST_A_PCIE>; + reset-names = "core", "mgmt", "mgmt-sticky", "pipe", + "pm", "pclk", "aclk"; + status = "disabled"; + + pcie0_intc: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + + pcie0_ep: pcie-ep@f8000000 { + compatible = "rockchip,rk3399-pcie-ep"; + reg = <0x0 0xfd000000 0x0 0x1000000>, + <0x0 0xfa000000 0x0 0x2000000>; + reg-names = "apb-base", "mem-base"; + clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>, + <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>; + clock-names = "aclk", "aclk-perf", + "hclk", "pm"; + max-functions = /bits/ 8 <8>; + num-lanes = <4>; + resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>, + <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>, + <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, + <&cru SRST_A_PCIE>; + reset-names = "core", "mgmt", "mgmt-sticky", "pipe", + "pm", "pclk", "aclk"; + phys = <&pcie_phy 0>, <&pcie_phy 1>, + <&pcie_phy 2>, <&pcie_phy 3>; + phy-names = "pcie-phy-0", "pcie-phy-1", + "pcie-phy-2", "pcie-phy-3"; + rockchip,max-outbound-regions = <32>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_clkreqnb_cpm>; + status = "disabled"; + }; + + gmac: ethernet@fe300000 { + compatible = "rockchip,rk3399-gmac"; + reg = <0x0 0xfe300000 0x0 0x10000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "macirq"; + clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX>, + <&cru SCLK_MAC_TX>, <&cru SCLK_MACREF>, + <&cru SCLK_MACREF_OUT>, <&cru ACLK_GMAC>, + <&cru PCLK_GMAC>; + clock-names = "stmmaceth", "mac_clk_rx", + "mac_clk_tx", "clk_mac_ref", + "clk_mac_refout", "aclk_mac", + "pclk_mac"; + power-domains = <&power RK3399_PD_GMAC>; + resets = <&cru SRST_A_GMAC>; + reset-names = "stmmaceth"; + rockchip,grf = <&grf>; + snps,txpbl = <0x4>; + status = "disabled"; + }; + + sdio0: mmc@fe310000 { + compatible = "rockchip,rk3399-dw-mshc", + "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xfe310000 0x0 0x4000>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH 0>; + max-frequency = <150000000>; + clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, + <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + power-domains = <&power RK3399_PD_SDIOAUDIO>; + resets = <&cru SRST_SDIO0>; + reset-names = "reset"; + status = "disabled"; + }; + + sdmmc: mmc@fe320000 { + compatible = "rockchip,rk3399-dw-mshc", + "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xfe320000 0x0 0x4000>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>; + max-frequency = <150000000>; + assigned-clocks = <&cru HCLK_SD>; + assigned-clock-rates = <200000000>; + clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, + <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + power-domains = <&power RK3399_PD_SD>; + resets = <&cru SRST_SDMMC>; + reset-names = "reset"; + status = "disabled"; + }; + + sdhci: mmc@fe330000 { + compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1"; + reg = <0x0 0xfe330000 0x0 0x10000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>; + arasan,soc-ctl-syscon = <&grf>; + assigned-clocks = <&cru SCLK_EMMC>; + assigned-clock-rates = <200000000>; + clocks = <&cru SCLK_EMMC>, <&cru ACLK_EMMC>; + clock-names = "clk_xin", "clk_ahb"; + clock-output-names = "emmc_cardclock"; + #clock-cells = <0>; + phys = <&emmc_phy>; + phy-names = "phy_arasan"; + power-domains = <&power RK3399_PD_EMMC>; + disable-cqe-dcmd; + status = "disabled"; + }; + + usb_host0_ehci: usb@fe380000 { + compatible = "generic-ehci"; + reg = <0x0 0xfe380000 0x0 0x20000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>, + <&u2phy0>; + phys = <&u2phy0_host>; + phy-names = "usb"; + status = "disabled"; + }; + + usb_host0_ohci: usb@fe3a0000 { + compatible = "generic-ohci"; + reg = <0x0 0xfe3a0000 0x0 0x20000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>, + <&u2phy0>; + phys = <&u2phy0_host>; + phy-names = "usb"; + status = "disabled"; + }; + + usb_host1_ehci: usb@fe3c0000 { + compatible = "generic-ehci"; + reg = <0x0 0xfe3c0000 0x0 0x20000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>, + <&u2phy1>; + phys = <&u2phy1_host>; + phy-names = "usb"; + status = "disabled"; + }; + + usb_host1_ohci: usb@fe3e0000 { + compatible = "generic-ohci"; + reg = <0x0 0xfe3e0000 0x0 0x20000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>, + <&u2phy1>; + phys = <&u2phy1_host>; + phy-names = "usb"; + status = "disabled"; + }; + + debug@fe430000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0 0xfe430000 0 0x1000>; + clocks = <&cru PCLK_COREDBG_L>; + clock-names = "apb_pclk"; + cpu = <&cpu_l0>; + }; + + debug@fe432000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0 0xfe432000 0 0x1000>; + clocks = <&cru PCLK_COREDBG_L>; + clock-names = "apb_pclk"; + cpu = <&cpu_l1>; + }; + + debug@fe434000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0 0xfe434000 0 0x1000>; + clocks = <&cru PCLK_COREDBG_L>; + clock-names = "apb_pclk"; + cpu = <&cpu_l2>; + }; + + debug@fe436000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0 0xfe436000 0 0x1000>; + clocks = <&cru PCLK_COREDBG_L>; + clock-names = "apb_pclk"; + cpu = <&cpu_l3>; + }; + + debug@fe610000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0 0xfe610000 0 0x1000>; + clocks = <&cru PCLK_COREDBG_B>; + clock-names = "apb_pclk"; + cpu = <&cpu_b0>; + }; + + debug@fe710000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0 0xfe710000 0 0x1000>; + clocks = <&cru PCLK_COREDBG_B>; + clock-names = "apb_pclk"; + cpu = <&cpu_b1>; + }; + + usbdrd3_0: usb@fe800000 { + compatible = "rockchip,rk3399-dwc3"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>, + <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_RKSOC_AXI_PERF>, + <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>; + clock-names = "ref_clk", "suspend_clk", + "bus_clk", "aclk_usb3_rksoc_axi_perf", + "aclk_usb3", "grf_clk"; + resets = <&cru SRST_A_USB3_OTG0>; + reset-names = "usb3-otg"; + status = "disabled"; + + usbdrd_dwc3_0: usb@fe800000 { + compatible = "snps,dwc3"; + reg = <0x0 0xfe800000 0x0 0x100000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_USB3OTG0_REF>, <&cru ACLK_USB3OTG0>, + <&cru SCLK_USB3OTG0_SUSPEND>; + clock-names = "ref", "bus_early", "suspend"; + dr_mode = "otg"; + phys = <&u2phy0_otg>, <&tcphy0_usb3>; + phy-names = "usb2-phy", "usb3-phy"; + phy_type = "utmi_wide"; + snps,dis_enblslpm_quirk; + snps,dis-u2-freeclk-exists-quirk; + snps,dis_u2_susphy_quirk; + snps,dis-del-phy-power-chg-quirk; + snps,dis-tx-ipgap-linecheck-quirk; + power-domains = <&power RK3399_PD_USB3>; + status = "disabled"; + }; + }; + + usbdrd3_1: usb@fe900000 { + compatible = "rockchip,rk3399-dwc3"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&cru SCLK_USB3OTG1_REF>, <&cru SCLK_USB3OTG1_SUSPEND>, + <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_RKSOC_AXI_PERF>, + <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>; + clock-names = "ref_clk", "suspend_clk", + "bus_clk", "aclk_usb3_rksoc_axi_perf", + "aclk_usb3", "grf_clk"; + resets = <&cru SRST_A_USB3_OTG1>; + reset-names = "usb3-otg"; + status = "disabled"; + + usbdrd_dwc3_1: usb@fe900000 { + compatible = "snps,dwc3"; + reg = <0x0 0xfe900000 0x0 0x100000>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_USB3OTG1_REF>, <&cru ACLK_USB3OTG1>, + <&cru SCLK_USB3OTG1_SUSPEND>; + clock-names = "ref", "bus_early", "suspend"; + dr_mode = "otg"; + phys = <&u2phy1_otg>, <&tcphy1_usb3>; + phy-names = "usb2-phy", "usb3-phy"; + phy_type = "utmi_wide"; + snps,dis_enblslpm_quirk; + snps,dis-u2-freeclk-exists-quirk; + snps,dis_u2_susphy_quirk; + snps,dis-del-phy-power-chg-quirk; + snps,dis-tx-ipgap-linecheck-quirk; + power-domains = <&power RK3399_PD_USB3>; + status = "disabled"; + }; + }; + + cdn_dp: dp@fec00000 { + compatible = "rockchip,rk3399-cdn-dp"; + reg = <0x0 0xfec00000 0x0 0x100000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>; + assigned-clocks = <&cru SCLK_DP_CORE>, <&cru SCLK_SPDIF_REC_DPTX>; + assigned-clock-rates = <100000000>, <200000000>; + clocks = <&cru SCLK_DP_CORE>, <&cru PCLK_DP_CTRL>, + <&cru SCLK_SPDIF_REC_DPTX>, <&cru PCLK_VIO_GRF>; + clock-names = "core-clk", "pclk", "spdif", "grf"; + phys = <&tcphy0_dp>, <&tcphy1_dp>; + power-domains = <&power RK3399_PD_HDCP>; + resets = <&cru SRST_DPTX_SPDIF_REC>, <&cru SRST_P_UPHY0_DPTX>, + <&cru SRST_P_UPHY0_APB>, <&cru SRST_DP_CORE>; + reset-names = "spdif", "dptx", "apb", "core"; + rockchip,grf = <&grf>; + #sound-dai-cells = <1>; + status = "disabled"; + + ports { + dp_in: port { + #address-cells = <1>; + #size-cells = <0>; + + dp_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_dp>; + }; + + dp_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_dp>; + }; + }; + }; + }; + + gic: interrupt-controller@fee00000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <4>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + interrupt-controller; + + reg = <0x0 0xfee00000 0 0x10000>, /* GICD */ + <0x0 0xfef00000 0 0xc0000>, /* GICR */ + <0x0 0xfff00000 0 0x10000>, /* GICC */ + <0x0 0xfff10000 0 0x10000>, /* GICH */ + <0x0 0xfff20000 0 0x10000>; /* GICV */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>; + its: msi-controller@fee20000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x0 0xfee20000 0x0 0x20000>; + }; + + ppi-partitions { + ppi_cluster0: interrupt-partition-0 { + affinity = <&cpu_l0 &cpu_l1 &cpu_l2 &cpu_l3>; + }; + + ppi_cluster1: interrupt-partition-1 { + affinity = <&cpu_b0 &cpu_b1>; + }; + }; + }; + + saradc: saradc@ff100000 { + compatible = "rockchip,rk3399-saradc"; + reg = <0x0 0xff100000 0x0 0x100>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH 0>; + #io-channel-cells = <1>; + clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + resets = <&cru SRST_P_SARADC>; + reset-names = "saradc-apb"; + status = "disabled"; + }; + + crypto0: crypto@ff8b0000 { + compatible = "rockchip,rk3399-crypto"; + reg = <0x0 0xff8b0000 0x0 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru HCLK_M_CRYPTO0>, <&cru HCLK_S_CRYPTO0>, <&cru SCLK_CRYPTO0>; + clock-names = "hclk_master", "hclk_slave", "sclk"; + resets = <&cru SRST_CRYPTO0>, <&cru SRST_CRYPTO0_S>, <&cru SRST_CRYPTO0_M>; + reset-names = "master", "slave", "crypto-rst"; + }; + + crypto1: crypto@ff8b8000 { + compatible = "rockchip,rk3399-crypto"; + reg = <0x0 0xff8b8000 0x0 0x4000>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru HCLK_M_CRYPTO1>, <&cru HCLK_S_CRYPTO1>, <&cru SCLK_CRYPTO1>; + clock-names = "hclk_master", "hclk_slave", "sclk"; + resets = <&cru SRST_CRYPTO1>, <&cru SRST_CRYPTO1_S>, <&cru SRST_CRYPTO1_M>; + reset-names = "master", "slave", "crypto-rst"; + }; + + i2c1: i2c@ff110000 { + compatible = "rockchip,rk3399-i2c"; + reg = <0x0 0xff110000 0x0 0x1000>; + assigned-clocks = <&cru SCLK_I2C1>; + assigned-clock-rates = <200000000>; + clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@ff120000 { + compatible = "rockchip,rk3399-i2c"; + reg = <0x0 0xff120000 0x0 0x1000>; + assigned-clocks = <&cru SCLK_I2C2>; + assigned-clock-rates = <200000000>; + clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@ff130000 { + compatible = "rockchip,rk3399-i2c"; + reg = <0x0 0xff130000 0x0 0x1000>; + assigned-clocks = <&cru SCLK_I2C3>; + assigned-clock-rates = <200000000>; + clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@ff140000 { + compatible = "rockchip,rk3399-i2c"; + reg = <0x0 0xff140000 0x0 0x1000>; + assigned-clocks = <&cru SCLK_I2C5>; + assigned-clock-rates = <200000000>; + clocks = <&cru SCLK_I2C5>, <&cru PCLK_I2C5>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@ff150000 { + compatible = "rockchip,rk3399-i2c"; + reg = <0x0 0xff150000 0x0 0x1000>; + assigned-clocks = <&cru SCLK_I2C6>; + assigned-clock-rates = <200000000>; + clocks = <&cru SCLK_I2C6>, <&cru PCLK_I2C6>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c7: i2c@ff160000 { + compatible = "rockchip,rk3399-i2c"; + reg = <0x0 0xff160000 0x0 0x1000>; + assigned-clocks = <&cru SCLK_I2C7>; + assigned-clock-rates = <200000000>; + clocks = <&cru SCLK_I2C7>, <&cru PCLK_I2C7>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c7_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart0: serial@ff180000 { + compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff180000 0x0 0x100>; + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH 0>; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer>; + status = "disabled"; + }; + + uart1: serial@ff190000 { + compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff190000 0x0 0x100>; + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; + clock-names = "baudclk", "apb_pclk"; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH 0>; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_xfer>; + status = "disabled"; + }; + + uart2: serial@ff1a0000 { + compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff1a0000 0x0 0x100>; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH 0>; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart2c_xfer>; + status = "disabled"; + }; + + uart3: serial@ff1b0000 { + compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff1b0000 0x0 0x100>; + clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; + clock-names = "baudclk", "apb_pclk"; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_xfer>; + status = "disabled"; + }; + + spi0: spi@ff1c0000 { + compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff1c0000 0x0 0x1000>; + clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; + clock-names = "spiclk", "apb_pclk"; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dmac_peri 10>, <&dmac_peri 11>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@ff1d0000 { + compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff1d0000 0x0 0x1000>; + clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>; + clock-names = "spiclk", "apb_pclk"; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dmac_peri 12>, <&dmac_peri 13>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@ff1e0000 { + compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff1e0000 0x0 0x1000>; + clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>; + clock-names = "spiclk", "apb_pclk"; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dmac_peri 14>, <&dmac_peri 15>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@ff1f0000 { + compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff1f0000 0x0 0x1000>; + clocks = <&cru SCLK_SPI4>, <&cru PCLK_SPI4>; + clock-names = "spiclk", "apb_pclk"; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dmac_peri 18>, <&dmac_peri 19>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&spi4_clk &spi4_tx &spi4_rx &spi4_cs0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@ff200000 { + compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff200000 0x0 0x1000>; + clocks = <&cru SCLK_SPI5>, <&cru PCLK_SPI5>; + clock-names = "spiclk", "apb_pclk"; + interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dmac_bus 8>, <&dmac_bus 9>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&spi5_clk &spi5_tx &spi5_rx &spi5_cs0>; + power-domains = <&power RK3399_PD_SDIOAUDIO>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + thermal_zones: thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <100>; + polling-delay = <1000>; + + thermal-sensors = <&tsadc 0>; + + trips { + cpu_alert0: cpu_alert0 { + temperature = <70000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_alert1: cpu_alert1 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit: cpu_crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = + <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu_alert1>; + cooling-device = + <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + gpu_thermal: gpu-thermal { + polling-delay-passive = <100>; + polling-delay = <1000>; + + thermal-sensors = <&tsadc 1>; + + trips { + gpu_alert0: gpu_alert0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + gpu_crit: gpu_crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&gpu_alert0>; + cooling-device = + <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + + tsadc: tsadc@ff260000 { + compatible = "rockchip,rk3399-tsadc"; + reg = <0x0 0xff260000 0x0 0x100>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH 0>; + assigned-clocks = <&cru SCLK_TSADC>; + assigned-clock-rates = <750000>; + clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; + clock-names = "tsadc", "apb_pclk"; + resets = <&cru SRST_TSADC>; + reset-names = "tsadc-apb"; + rockchip,grf = <&grf>; + rockchip,hw-tshut-temp = <95000>; + pinctrl-names = "init", "default", "sleep"; + pinctrl-0 = <&otp_pin>; + pinctrl-1 = <&otp_out>; + pinctrl-2 = <&otp_pin>; + #thermal-sensor-cells = <1>; + status = "disabled"; + }; + + qos_emmc: qos@ffa58000 { + compatible = "rockchip,rk3399-qos", "syscon"; + reg = <0x0 0xffa58000 0x0 0x20>; + }; + + qos_gmac: qos@ffa5c000 { + compatible = "rockchip,rk3399-qos", "syscon"; + reg = <0x0 0xffa5c000 0x0 0x20>; + }; + + qos_pcie: qos@ffa60080 { + compatible = "rockchip,rk3399-qos", "syscon"; + reg = <0x0 0xffa60080 0x0 0x20>; + }; + + qos_usb_host0: qos@ffa60100 { + compatible = "rockchip,rk3399-qos", "syscon"; + reg = <0x0 0xffa60100 0x0 0x20>; + }; + + qos_usb_host1: qos@ffa60180 { + compatible = "rockchip,rk3399-qos", "syscon"; + reg = <0x0 0xffa60180 0x0 0x20>; + }; + + qos_usb_otg0: qos@ffa70000 { + compatible = "rockchip,rk3399-qos", "syscon"; + reg = <0x0 0xffa70000 0x0 0x20>; + }; + + qos_usb_otg1: qos@ffa70080 { + compatible = "rockchip,rk3399-qos", "syscon"; + reg = <0x0 0xffa70080 0x0 0x20>; + }; + + qos_sd: qos@ffa74000 { + compatible = "rockchip,rk3399-qos", "syscon"; + reg = <0x0 0xffa74000 0x0 0x20>; + }; + + qos_sdioaudio: qos@ffa76000 { + compatible = "rockchip,rk3399-qos", "syscon"; + reg = <0x0 0xffa76000 0x0 0x20>; + }; + + qos_hdcp: qos@ffa90000 { + compatible = "rockchip,rk3399-qos", "syscon"; + reg = <0x0 0xffa90000 0x0 0x20>; + }; + + qos_iep: qos@ffa98000 { + compatible = "rockchip,rk3399-qos", "syscon"; + reg = <0x0 0xffa98000 0x0 0x20>; + }; + + qos_isp0_m0: qos@ffaa0000 { + compatible = "rockchip,rk3399-qos", "syscon"; + reg = <0x0 0xffaa0000 0x0 0x20>; + }; + + qos_isp0_m1: qos@ffaa0080 { + compatible = "rockchip,rk3399-qos", "syscon"; + reg = <0x0 0xffaa0080 0x0 0x20>; + }; + + qos_isp1_m0: qos@ffaa8000 { + compatible = "rockchip,rk3399-qos", "syscon"; + reg = <0x0 0xffaa8000 0x0 0x20>; + }; + + qos_isp1_m1: qos@ffaa8080 { + compatible = "rockchip,rk3399-qos", "syscon"; + reg = <0x0 0xffaa8080 0x0 0x20>; + }; + + qos_rga_r: qos@ffab0000 { + compatible = "rockchip,rk3399-qos", "syscon"; + reg = <0x0 0xffab0000 0x0 0x20>; + }; + + qos_rga_w: qos@ffab0080 { + compatible = "rockchip,rk3399-qos", "syscon"; + reg = <0x0 0xffab0080 0x0 0x20>; + }; + + qos_video_m0: qos@ffab8000 { + compatible = "rockchip,rk3399-qos", "syscon"; + reg = <0x0 0xffab8000 0x0 0x20>; + }; + + qos_video_m1_r: qos@ffac0000 { + compatible = "rockchip,rk3399-qos", "syscon"; + reg = <0x0 0xffac0000 0x0 0x20>; + }; + + qos_video_m1_w: qos@ffac0080 { + compatible = "rockchip,rk3399-qos", "syscon"; + reg = <0x0 0xffac0080 0x0 0x20>; + }; + + qos_vop_big_r: qos@ffac8000 { + compatible = "rockchip,rk3399-qos", "syscon"; + reg = <0x0 0xffac8000 0x0 0x20>; + }; + + qos_vop_big_w: qos@ffac8080 { + compatible = "rockchip,rk3399-qos", "syscon"; + reg = <0x0 0xffac8080 0x0 0x20>; + }; + + qos_vop_little: qos@ffad0000 { + compatible = "rockchip,rk3399-qos", "syscon"; + reg = <0x0 0xffad0000 0x0 0x20>; + }; + + qos_perihp: qos@ffad8080 { + compatible = "rockchip,rk3399-qos", "syscon"; + reg = <0x0 0xffad8080 0x0 0x20>; + }; + + qos_gpu: qos@ffae0000 { + compatible = "rockchip,rk3399-qos", "syscon"; + reg = <0x0 0xffae0000 0x0 0x20>; + }; + + pmu: power-management@ff310000 { + compatible = "rockchip,rk3399-pmu", "syscon", "simple-mfd"; + reg = <0x0 0xff310000 0x0 0x1000>; + + /* + * Note: RK3399 supports 6 voltage domains including VD_CORE_L, + * VD_CORE_B, VD_CENTER, VD_GPU, VD_LOGIC and VD_PMU. + * Some of the power domains are grouped together for every + * voltage domain. + * The detail contents as below. + */ + power: power-controller { + compatible = "rockchip,rk3399-power-controller"; + #power-domain-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + /* These power domains are grouped by VD_CENTER */ + power-domain@RK3399_PD_IEP { + reg = <RK3399_PD_IEP>; + clocks = <&cru ACLK_IEP>, + <&cru HCLK_IEP>; + pm_qos = <&qos_iep>; + #power-domain-cells = <0>; + }; + power-domain@RK3399_PD_RGA { + reg = <RK3399_PD_RGA>; + clocks = <&cru ACLK_RGA>, + <&cru HCLK_RGA>; + pm_qos = <&qos_rga_r>, + <&qos_rga_w>; + #power-domain-cells = <0>; + }; + power-domain@RK3399_PD_VCODEC { + reg = <RK3399_PD_VCODEC>; + clocks = <&cru ACLK_VCODEC>, + <&cru HCLK_VCODEC>; + pm_qos = <&qos_video_m0>; + #power-domain-cells = <0>; + }; + power-domain@RK3399_PD_VDU { + reg = <RK3399_PD_VDU>; + clocks = <&cru ACLK_VDU>, + <&cru HCLK_VDU>, + <&cru SCLK_VDU_CA>, + <&cru SCLK_VDU_CORE>; + pm_qos = <&qos_video_m1_r>, + <&qos_video_m1_w>; + #power-domain-cells = <0>; + }; + + /* These power domains are grouped by VD_GPU */ + power-domain@RK3399_PD_GPU { + reg = <RK3399_PD_GPU>; + clocks = <&cru ACLK_GPU>; + pm_qos = <&qos_gpu>; + #power-domain-cells = <0>; + }; + + /* These power domains are grouped by VD_LOGIC */ + power-domain@RK3399_PD_EDP { + reg = <RK3399_PD_EDP>; + clocks = <&cru PCLK_EDP_CTRL>; + #power-domain-cells = <0>; + }; + power-domain@RK3399_PD_EMMC { + reg = <RK3399_PD_EMMC>; + clocks = <&cru ACLK_EMMC>; + pm_qos = <&qos_emmc>; + #power-domain-cells = <0>; + }; + power-domain@RK3399_PD_GMAC { + reg = <RK3399_PD_GMAC>; + clocks = <&cru ACLK_GMAC>, + <&cru PCLK_GMAC>; + pm_qos = <&qos_gmac>; + #power-domain-cells = <0>; + }; + power-domain@RK3399_PD_SD { + reg = <RK3399_PD_SD>; + clocks = <&cru HCLK_SDMMC>, + <&cru SCLK_SDMMC>; + pm_qos = <&qos_sd>; + #power-domain-cells = <0>; + }; + power-domain@RK3399_PD_SDIOAUDIO { + reg = <RK3399_PD_SDIOAUDIO>; + clocks = <&cru HCLK_SDIO>; + pm_qos = <&qos_sdioaudio>; + #power-domain-cells = <0>; + }; + power-domain@RK3399_PD_TCPD0 { + reg = <RK3399_PD_TCPD0>; + clocks = <&cru SCLK_UPHY0_TCPDCORE>, + <&cru SCLK_UPHY0_TCPDPHY_REF>; + #power-domain-cells = <0>; + }; + power-domain@RK3399_PD_TCPD1 { + reg = <RK3399_PD_TCPD1>; + clocks = <&cru SCLK_UPHY1_TCPDCORE>, + <&cru SCLK_UPHY1_TCPDPHY_REF>; + #power-domain-cells = <0>; + }; + power-domain@RK3399_PD_USB3 { + reg = <RK3399_PD_USB3>; + clocks = <&cru ACLK_USB3>; + pm_qos = <&qos_usb_otg0>, + <&qos_usb_otg1>; + #power-domain-cells = <0>; + }; + power-domain@RK3399_PD_VIO { + reg = <RK3399_PD_VIO>; + #power-domain-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + power-domain@RK3399_PD_HDCP { + reg = <RK3399_PD_HDCP>; + clocks = <&cru ACLK_HDCP>, + <&cru HCLK_HDCP>, + <&cru PCLK_HDCP>; + pm_qos = <&qos_hdcp>; + #power-domain-cells = <0>; + }; + power-domain@RK3399_PD_ISP0 { + reg = <RK3399_PD_ISP0>; + clocks = <&cru ACLK_ISP0>, + <&cru HCLK_ISP0>; + pm_qos = <&qos_isp0_m0>, + <&qos_isp0_m1>; + #power-domain-cells = <0>; + }; + power-domain@RK3399_PD_ISP1 { + reg = <RK3399_PD_ISP1>; + clocks = <&cru ACLK_ISP1>, + <&cru HCLK_ISP1>; + pm_qos = <&qos_isp1_m0>, + <&qos_isp1_m1>; + #power-domain-cells = <0>; + }; + power-domain@RK3399_PD_VO { + reg = <RK3399_PD_VO>; + #power-domain-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + power-domain@RK3399_PD_VOPB { + reg = <RK3399_PD_VOPB>; + clocks = <&cru ACLK_VOP0>, + <&cru HCLK_VOP0>; + pm_qos = <&qos_vop_big_r>, + <&qos_vop_big_w>; + #power-domain-cells = <0>; + }; + power-domain@RK3399_PD_VOPL { + reg = <RK3399_PD_VOPL>; + clocks = <&cru ACLK_VOP1>, + <&cru HCLK_VOP1>; + pm_qos = <&qos_vop_little>; + #power-domain-cells = <0>; + }; + }; + }; + }; + }; + + pmugrf: syscon@ff320000 { + compatible = "rockchip,rk3399-pmugrf", "syscon", "simple-mfd"; + reg = <0x0 0xff320000 0x0 0x1000>; + + pmu_io_domains: io-domains { + compatible = "rockchip,rk3399-pmu-io-voltage-domain"; + status = "disabled"; + }; + }; + + spi3: spi@ff350000 { + compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff350000 0x0 0x1000>; + clocks = <&pmucru SCLK_SPI3_PMU>, <&pmucru PCLK_SPI3_PMU>; + clock-names = "spiclk", "apb_pclk"; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi3_clk &spi3_tx &spi3_rx &spi3_cs0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart4: serial@ff370000 { + compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff370000 0x0 0x100>; + clocks = <&pmucru SCLK_UART4_PMU>, <&pmucru PCLK_UART4_PMU>; + clock-names = "baudclk", "apb_pclk"; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH 0>; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart4_xfer>; + status = "disabled"; + }; + + i2c0: i2c@ff3c0000 { + compatible = "rockchip,rk3399-i2c"; + reg = <0x0 0xff3c0000 0x0 0x1000>; + assigned-clocks = <&pmucru SCLK_I2C0_PMU>; + assigned-clock-rates = <200000000>; + clocks = <&pmucru SCLK_I2C0_PMU>, <&pmucru PCLK_I2C0_PMU>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@ff3d0000 { + compatible = "rockchip,rk3399-i2c"; + reg = <0x0 0xff3d0000 0x0 0x1000>; + assigned-clocks = <&pmucru SCLK_I2C4_PMU>; + assigned-clock-rates = <200000000>; + clocks = <&pmucru SCLK_I2C4_PMU>, <&pmucru PCLK_I2C4_PMU>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c8: i2c@ff3e0000 { + compatible = "rockchip,rk3399-i2c"; + reg = <0x0 0xff3e0000 0x0 0x1000>; + assigned-clocks = <&pmucru SCLK_I2C8_PMU>; + assigned-clock-rates = <200000000>; + clocks = <&pmucru SCLK_I2C8_PMU>, <&pmucru PCLK_I2C8_PMU>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c8_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pwm0: pwm@ff420000 { + compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm"; + reg = <0x0 0xff420000 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin>; + clocks = <&pmucru PCLK_RKPWM_PMU>; + status = "disabled"; + }; + + pwm1: pwm@ff420010 { + compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm"; + reg = <0x0 0xff420010 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_pin>; + clocks = <&pmucru PCLK_RKPWM_PMU>; + status = "disabled"; + }; + + pwm2: pwm@ff420020 { + compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm"; + reg = <0x0 0xff420020 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pin>; + clocks = <&pmucru PCLK_RKPWM_PMU>; + status = "disabled"; + }; + + pwm3: pwm@ff420030 { + compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm"; + reg = <0x0 0xff420030 0x0 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm3a_pin>; + clocks = <&pmucru PCLK_RKPWM_PMU>; + status = "disabled"; + }; + + dfi: dfi@ff630000 { + reg = <0x00 0xff630000 0x00 0x4000>; + compatible = "rockchip,rk3399-dfi"; + rockchip,pmu = <&pmugrf>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru PCLK_DDR_MON>; + clock-names = "pclk_ddr_mon"; + }; + + vpu: video-codec@ff650000 { + compatible = "rockchip,rk3399-vpu"; + reg = <0x0 0xff650000 0x0 0x800>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "vepu", "vdpu"; + clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; + clock-names = "aclk", "hclk"; + iommus = <&vpu_mmu>; + power-domains = <&power RK3399_PD_VCODEC>; + }; + + vpu_mmu: iommu@ff650800 { + compatible = "rockchip,iommu"; + reg = <0x0 0xff650800 0x0 0x40>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; + clock-names = "aclk", "iface"; + #iommu-cells = <0>; + power-domains = <&power RK3399_PD_VCODEC>; + }; + + vdec: video-codec@ff660000 { + compatible = "rockchip,rk3399-vdec"; + reg = <0x0 0xff660000 0x0 0x480>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>, + <&cru SCLK_VDU_CA>, <&cru SCLK_VDU_CORE>; + clock-names = "axi", "ahb", "cabac", "core"; + iommus = <&vdec_mmu>; + power-domains = <&power RK3399_PD_VDU>; + }; + + vdec_mmu: iommu@ff660480 { + compatible = "rockchip,iommu"; + reg = <0x0 0xff660480 0x0 0x40>, <0x0 0xff6604c0 0x0 0x40>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>; + clock-names = "aclk", "iface"; + power-domains = <&power RK3399_PD_VDU>; + #iommu-cells = <0>; + }; + + iep_mmu: iommu@ff670800 { + compatible = "rockchip,iommu"; + reg = <0x0 0xff670800 0x0 0x40>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>; + clock-names = "aclk", "iface"; + #iommu-cells = <0>; + status = "disabled"; + }; + + rga: rga@ff680000 { + compatible = "rockchip,rk3399-rga"; + reg = <0x0 0xff680000 0x0 0x10000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA_CORE>; + clock-names = "aclk", "hclk", "sclk"; + resets = <&cru SRST_RGA_CORE>, <&cru SRST_A_RGA>, <&cru SRST_H_RGA>; + reset-names = "core", "axi", "ahb"; + power-domains = <&power RK3399_PD_RGA>; + }; + + efuse0: efuse@ff690000 { + compatible = "rockchip,rk3399-efuse"; + reg = <0x0 0xff690000 0x0 0x80>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&cru PCLK_EFUSE1024NS>; + clock-names = "pclk_efuse"; + + /* Data cells */ + cpu_id: cpu-id@7 { + reg = <0x07 0x10>; + }; + cpub_leakage: cpu-leakage@17 { + reg = <0x17 0x1>; + }; + gpu_leakage: gpu-leakage@18 { + reg = <0x18 0x1>; + }; + center_leakage: center-leakage@19 { + reg = <0x19 0x1>; + }; + cpul_leakage: cpu-leakage@1a { + reg = <0x1a 0x1>; + }; + logic_leakage: logic-leakage@1b { + reg = <0x1b 0x1>; + }; + wafer_info: wafer-info@1c { + reg = <0x1c 0x1>; + }; + }; + + dmac_bus: dma-controller@ff6d0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff6d0000 0x0 0x4000>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>; + #dma-cells = <1>; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC0_PERILP>; + clock-names = "apb_pclk"; + }; + + dmac_peri: dma-controller@ff6e0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff6e0000 0x0 0x4000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>; + #dma-cells = <1>; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC1_PERILP>; + clock-names = "apb_pclk"; + }; + + pmucru: clock-controller@ff750000 { + compatible = "rockchip,rk3399-pmucru"; + reg = <0x0 0xff750000 0x0 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; + rockchip,grf = <&pmugrf>; + #clock-cells = <1>; + #reset-cells = <1>; + assigned-clocks = <&pmucru PLL_PPLL>; + assigned-clock-rates = <676000000>; + }; + + cru: clock-controller@ff760000 { + compatible = "rockchip,rk3399-cru"; + reg = <0x0 0xff760000 0x0 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + assigned-clocks = + <&cru PLL_GPLL>, <&cru PLL_CPLL>, + <&cru PLL_NPLL>, + <&cru ACLK_PERIHP>, <&cru HCLK_PERIHP>, + <&cru PCLK_PERIHP>, + <&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>, + <&cru PCLK_PERILP0>, <&cru ACLK_CCI>, + <&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>, + <&cru ACLK_VIO>, <&cru ACLK_HDCP>, + <&cru ACLK_GIC_PRE>, + <&cru PCLK_DDR>, + <&cru ACLK_VDU>; + assigned-clock-rates = + <594000000>, <800000000>, + <1000000000>, + <150000000>, <75000000>, + <37500000>, + <100000000>, <100000000>, + <50000000>, <600000000>, + <100000000>, <50000000>, + <400000000>, <400000000>, + <200000000>, + <200000000>, + <400000000>; + }; + + grf: syscon@ff770000 { + compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd"; + reg = <0x0 0xff770000 0x0 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + + io_domains: io-domains { + compatible = "rockchip,rk3399-io-voltage-domain"; + status = "disabled"; + }; + + mipi_dphy_rx0: mipi-dphy-rx0 { + compatible = "rockchip,rk3399-mipi-dphy-rx0"; + clocks = <&cru SCLK_MIPIDPHY_REF>, + <&cru SCLK_DPHY_RX0_CFG>, + <&cru PCLK_VIO_GRF>; + clock-names = "dphy-ref", "dphy-cfg", "grf"; + power-domains = <&power RK3399_PD_VIO>; + #phy-cells = <0>; + status = "disabled"; + }; + + u2phy0: usb2phy@e450 { + compatible = "rockchip,rk3399-usb2phy"; + reg = <0xe450 0x10>; + clocks = <&cru SCLK_USB2PHY0_REF>; + clock-names = "phyclk"; + #clock-cells = <0>; + clock-output-names = "clk_usbphy0_480m"; + status = "disabled"; + + u2phy0_host: host-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "linestate"; + status = "disabled"; + }; + + u2phy0_otg: otg-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "otg-bvalid", "otg-id", + "linestate"; + status = "disabled"; + }; + }; + + u2phy1: usb2phy@e460 { + compatible = "rockchip,rk3399-usb2phy"; + reg = <0xe460 0x10>; + clocks = <&cru SCLK_USB2PHY1_REF>; + clock-names = "phyclk"; + #clock-cells = <0>; + clock-output-names = "clk_usbphy1_480m"; + status = "disabled"; + + u2phy1_host: host-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "linestate"; + status = "disabled"; + }; + + u2phy1_otg: otg-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "otg-bvalid", "otg-id", + "linestate"; + status = "disabled"; + }; + }; + + emmc_phy: phy@f780 { + compatible = "rockchip,rk3399-emmc-phy"; + reg = <0xf780 0x24>; + clocks = <&sdhci>; + clock-names = "emmcclk"; + drive-impedance-ohm = <50>; + #phy-cells = <0>; + status = "disabled"; + }; + + pcie_phy: pcie-phy { + compatible = "rockchip,rk3399-pcie-phy"; + clocks = <&cru SCLK_PCIEPHY_REF>; + clock-names = "refclk"; + #phy-cells = <1>; + resets = <&cru SRST_PCIEPHY>; + reset-names = "phy"; + status = "disabled"; + }; + }; + + tcphy0: phy@ff7c0000 { + compatible = "rockchip,rk3399-typec-phy"; + reg = <0x0 0xff7c0000 0x0 0x40000>; + clocks = <&cru SCLK_UPHY0_TCPDCORE>, + <&cru SCLK_UPHY0_TCPDPHY_REF>; + clock-names = "tcpdcore", "tcpdphy-ref"; + assigned-clocks = <&cru SCLK_UPHY0_TCPDCORE>; + assigned-clock-rates = <50000000>; + power-domains = <&power RK3399_PD_TCPD0>; + resets = <&cru SRST_UPHY0>, + <&cru SRST_UPHY0_PIPE_L00>, + <&cru SRST_P_UPHY0_TCPHY>; + reset-names = "uphy", "uphy-pipe", "uphy-tcphy"; + rockchip,grf = <&grf>; + status = "disabled"; + + tcphy0_dp: dp-port { + #phy-cells = <0>; + }; + + tcphy0_usb3: usb3-port { + #phy-cells = <0>; + }; + }; + + tcphy1: phy@ff800000 { + compatible = "rockchip,rk3399-typec-phy"; + reg = <0x0 0xff800000 0x0 0x40000>; + clocks = <&cru SCLK_UPHY1_TCPDCORE>, + <&cru SCLK_UPHY1_TCPDPHY_REF>; + clock-names = "tcpdcore", "tcpdphy-ref"; + assigned-clocks = <&cru SCLK_UPHY1_TCPDCORE>; + assigned-clock-rates = <50000000>; + power-domains = <&power RK3399_PD_TCPD1>; + resets = <&cru SRST_UPHY1>, + <&cru SRST_UPHY1_PIPE_L00>, + <&cru SRST_P_UPHY1_TCPHY>; + reset-names = "uphy", "uphy-pipe", "uphy-tcphy"; + rockchip,grf = <&grf>; + status = "disabled"; + + tcphy1_dp: dp-port { + #phy-cells = <0>; + }; + + tcphy1_usb3: usb3-port { + #phy-cells = <0>; + }; + }; + + watchdog@ff848000 { + compatible = "rockchip,rk3399-wdt", "snps,dw-wdt"; + reg = <0x0 0xff848000 0x0 0x100>; + clocks = <&cru PCLK_WDT>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + rktimer: rktimer@ff850000 { + compatible = "rockchip,rk3399-timer"; + reg = <0x0 0xff850000 0x0 0x1000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru PCLK_TIMER0>, <&cru SCLK_TIMER00>; + clock-names = "pclk", "timer"; + }; + + spdif: spdif@ff870000 { + compatible = "rockchip,rk3399-spdif"; + reg = <0x0 0xff870000 0x0 0x1000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dmac_bus 7>; + dma-names = "tx"; + clock-names = "mclk", "hclk"; + clocks = <&cru SCLK_SPDIF_8CH>, <&cru HCLK_SPDIF>; + pinctrl-names = "default"; + pinctrl-0 = <&spdif_bus>; + power-domains = <&power RK3399_PD_SDIOAUDIO>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s0: i2s@ff880000 { + compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xff880000 0x0 0x1000>; + rockchip,grf = <&grf>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dmac_bus 0>, <&dmac_bus 1>; + dma-names = "tx", "rx"; + clock-names = "i2s_clk", "i2s_hclk"; + clocks = <&cru SCLK_I2S0_8CH>, <&cru HCLK_I2S0_8CH>; + pinctrl-names = "bclk_on", "bclk_off"; + pinctrl-0 = <&i2s0_8ch_bus>; + pinctrl-1 = <&i2s0_8ch_bus_bclk_off>; + power-domains = <&power RK3399_PD_SDIOAUDIO>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s1: i2s@ff890000 { + compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xff890000 0x0 0x1000>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dmac_bus 2>, <&dmac_bus 3>; + dma-names = "tx", "rx"; + clock-names = "i2s_clk", "i2s_hclk"; + clocks = <&cru SCLK_I2S1_8CH>, <&cru HCLK_I2S1_8CH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1_2ch_bus>; + power-domains = <&power RK3399_PD_SDIOAUDIO>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s2: i2s@ff8a0000 { + compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xff8a0000 0x0 0x1000>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dmac_bus 4>, <&dmac_bus 5>; + dma-names = "tx", "rx"; + clock-names = "i2s_clk", "i2s_hclk"; + clocks = <&cru SCLK_I2S2_8CH>, <&cru HCLK_I2S2_8CH>; + power-domains = <&power RK3399_PD_SDIOAUDIO>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + vopl: vop@ff8f0000 { + compatible = "rockchip,rk3399-vop-lit"; + reg = <0x0 0xff8f0000 0x0 0x2000>, <0x0 0xff8f2000 0x0 0x400>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>; + assigned-clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>; + assigned-clock-rates = <400000000>, <100000000>; + clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>; + clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + iommus = <&vopl_mmu>; + power-domains = <&power RK3399_PD_VOPL>; + resets = <&cru SRST_A_VOP1>, <&cru SRST_H_VOP1>, <&cru SRST_D_VOP1>; + reset-names = "axi", "ahb", "dclk"; + status = "disabled"; + + vopl_out: port { + #address-cells = <1>; + #size-cells = <0>; + + vopl_out_mipi: endpoint@0 { + reg = <0>; + remote-endpoint = <&mipi_in_vopl>; + }; + + vopl_out_edp: endpoint@1 { + reg = <1>; + remote-endpoint = <&edp_in_vopl>; + }; + + vopl_out_hdmi: endpoint@2 { + reg = <2>; + remote-endpoint = <&hdmi_in_vopl>; + }; + + vopl_out_mipi1: endpoint@3 { + reg = <3>; + remote-endpoint = <&mipi1_in_vopl>; + }; + + vopl_out_dp: endpoint@4 { + reg = <4>; + remote-endpoint = <&dp_in_vopl>; + }; + }; + }; + + vopl_mmu: iommu@ff8f3f00 { + compatible = "rockchip,iommu"; + reg = <0x0 0xff8f3f00 0x0 0x100>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>; + clock-names = "aclk", "iface"; + power-domains = <&power RK3399_PD_VOPL>; + #iommu-cells = <0>; + status = "disabled"; + }; + + vopb: vop@ff900000 { + compatible = "rockchip,rk3399-vop-big"; + reg = <0x0 0xff900000 0x0 0x2000>, <0x0 0xff902000 0x0 0x1000>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>; + assigned-clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>; + assigned-clock-rates = <400000000>, <100000000>; + clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>; + clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + iommus = <&vopb_mmu>; + power-domains = <&power RK3399_PD_VOPB>; + resets = <&cru SRST_A_VOP0>, <&cru SRST_H_VOP0>, <&cru SRST_D_VOP0>; + reset-names = "axi", "ahb", "dclk"; + status = "disabled"; + + vopb_out: port { + #address-cells = <1>; + #size-cells = <0>; + + vopb_out_edp: endpoint@0 { + reg = <0>; + remote-endpoint = <&edp_in_vopb>; + }; + + vopb_out_mipi: endpoint@1 { + reg = <1>; + remote-endpoint = <&mipi_in_vopb>; + }; + + vopb_out_hdmi: endpoint@2 { + reg = <2>; + remote-endpoint = <&hdmi_in_vopb>; + }; + + vopb_out_mipi1: endpoint@3 { + reg = <3>; + remote-endpoint = <&mipi1_in_vopb>; + }; + + vopb_out_dp: endpoint@4 { + reg = <4>; + remote-endpoint = <&dp_in_vopb>; + }; + }; + }; + + vopb_mmu: iommu@ff903f00 { + compatible = "rockchip,iommu"; + reg = <0x0 0xff903f00 0x0 0x100>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>; + clock-names = "aclk", "iface"; + power-domains = <&power RK3399_PD_VOPB>; + #iommu-cells = <0>; + status = "disabled"; + }; + + isp0: isp0@ff910000 { + compatible = "rockchip,rk3399-cif-isp"; + reg = <0x0 0xff910000 0x0 0x4000>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_ISP0>, + <&cru ACLK_ISP0_WRAPPER>, + <&cru HCLK_ISP0_WRAPPER>; + clock-names = "isp", "aclk", "hclk"; + iommus = <&isp0_mmu>; + phys = <&mipi_dphy_rx0>; + phy-names = "dphy"; + power-domains = <&power RK3399_PD_ISP0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + + isp0_mmu: iommu@ff914000 { + compatible = "rockchip,iommu"; + reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_ISP0_WRAPPER>, <&cru HCLK_ISP0_WRAPPER>; + clock-names = "aclk", "iface"; + #iommu-cells = <0>; + power-domains = <&power RK3399_PD_ISP0>; + rockchip,disable-mmu-reset; + }; + + isp1: isp1@ff920000 { + compatible = "rockchip,rk3399-cif-isp"; + reg = <0x0 0xff920000 0x0 0x4000>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_ISP1>, + <&cru ACLK_ISP1_WRAPPER>, + <&cru HCLK_ISP1_WRAPPER>; + clock-names = "isp", "aclk", "hclk"; + iommus = <&isp1_mmu>; + phys = <&mipi_dsi1>; + phy-names = "dphy"; + power-domains = <&power RK3399_PD_ISP1>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + + isp1_mmu: iommu@ff924000 { + compatible = "rockchip,iommu"; + reg = <0x0 0xff924000 0x0 0x100>, <0x0 0xff925000 0x0 0x100>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_ISP1_WRAPPER>, <&cru HCLK_ISP1_WRAPPER>; + clock-names = "aclk", "iface"; + #iommu-cells = <0>; + power-domains = <&power RK3399_PD_ISP1>; + rockchip,disable-mmu-reset; + }; + + hdmi_sound: hdmi-sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,name = "hdmi-sound"; + status = "disabled"; + + simple-audio-card,cpu { + sound-dai = <&i2s2>; + }; + simple-audio-card,codec { + sound-dai = <&hdmi>; + }; + }; + + hdmi: hdmi@ff940000 { + compatible = "rockchip,rk3399-dw-hdmi"; + reg = <0x0 0xff940000 0x0 0x20000>; + reg-io-width = <4>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru PCLK_HDMI_CTRL>, + <&cru SCLK_HDMI_SFR>, + <&cru SCLK_HDMI_CEC>, + <&cru PCLK_VIO_GRF>, + <&cru PLL_VPLL>; + clock-names = "iahb", "isfr", "cec", "grf", "ref"; + power-domains = <&power RK3399_PD_HDCP>; + rockchip,grf = <&grf>; + #sound-dai-cells = <0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_hdmi>; + }; + hdmi_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_hdmi>; + }; + }; + + hdmi_out: port@1 { + reg = <1>; + }; + }; + }; + + mipi_dsi: dsi@ff960000 { + compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi"; + reg = <0x0 0xff960000 0x0 0x8000>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_DPHY_PLL>, <&cru PCLK_MIPI_DSI0>, + <&cru SCLK_DPHY_TX0_CFG>, <&cru PCLK_VIO_GRF>; + clock-names = "ref", "pclk", "phy_cfg", "grf"; + power-domains = <&power RK3399_PD_VIO>; + resets = <&cru SRST_P_MIPI_DSI0>; + reset-names = "apb"; + rockchip,grf = <&grf>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mipi_in: port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + mipi_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_mipi>; + }; + + mipi_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_mipi>; + }; + }; + + mipi_out: port@1 { + reg = <1>; + }; + }; + }; + + mipi_dsi1: dsi@ff968000 { + compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi"; + reg = <0x0 0xff968000 0x0 0x8000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_DPHY_PLL>, <&cru PCLK_MIPI_DSI1>, + <&cru SCLK_DPHY_TX1RX1_CFG>, <&cru PCLK_VIO_GRF>; + clock-names = "ref", "pclk", "phy_cfg", "grf"; + power-domains = <&power RK3399_PD_VIO>; + resets = <&cru SRST_P_MIPI_DSI1>; + reset-names = "apb"; + rockchip,grf = <&grf>; + #address-cells = <1>; + #size-cells = <0>; + #phy-cells = <0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mipi1_in: port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + mipi1_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_mipi1>; + }; + + mipi1_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_mipi1>; + }; + }; + + mipi1_out: port@1 { + reg = <1>; + }; + }; + }; + + edp: dp@ff970000 { + compatible = "rockchip,rk3399-edp"; + reg = <0x0 0xff970000 0x0 0x8000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru PCLK_EDP>, <&cru PCLK_EDP_CTRL>, <&cru PCLK_VIO_GRF>; + clock-names = "dp", "pclk", "grf"; + pinctrl-names = "default"; + pinctrl-0 = <&edp_hpd>; + power-domains = <&power RK3399_PD_EDP>; + resets = <&cru SRST_P_EDP_CTRL>; + reset-names = "dp"; + rockchip,grf = <&grf>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + edp_in: port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + edp_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_edp>; + }; + + edp_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_edp>; + }; + }; + + edp_out: port@1 { + reg = <1>; + }; + }; + }; + + gpu: gpu@ff9a0000 { + compatible = "rockchip,rk3399-mali", "arm,mali-t860"; + reg = <0x0 0xff9a0000 0x0 0x10000>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "job", "mmu", "gpu"; + clocks = <&cru ACLK_GPU>; + #cooling-cells = <2>; + dynamic-power-coefficient = <2640>; + power-domains = <&power RK3399_PD_GPU>; + status = "disabled"; + }; + + pinctrl: pinctrl { + compatible = "rockchip,rk3399-pinctrl"; + rockchip,grf = <&grf>; + rockchip,pmu = <&pmugrf>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio0: gpio@ff720000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff720000 0x0 0x100>; + clocks = <&pmucru PCLK_GPIO0_PMU>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>; + + gpio-controller; + #gpio-cells = <0x2>; + + interrupt-controller; + #interrupt-cells = <0x2>; + }; + + gpio1: gpio@ff730000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff730000 0x0 0x100>; + clocks = <&pmucru PCLK_GPIO1_PMU>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH 0>; + + gpio-controller; + #gpio-cells = <0x2>; + + interrupt-controller; + #interrupt-cells = <0x2>; + }; + + gpio2: gpio@ff780000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff780000 0x0 0x100>; + clocks = <&cru PCLK_GPIO2>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH 0>; + + gpio-controller; + #gpio-cells = <0x2>; + + interrupt-controller; + #interrupt-cells = <0x2>; + }; + + gpio3: gpio@ff788000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff788000 0x0 0x100>; + clocks = <&cru PCLK_GPIO3>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>; + + gpio-controller; + #gpio-cells = <0x2>; + + interrupt-controller; + #interrupt-cells = <0x2>; + }; + + gpio4: gpio@ff790000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff790000 0x0 0x100>; + clocks = <&cru PCLK_GPIO4>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>; + + gpio-controller; + #gpio-cells = <0x2>; + + interrupt-controller; + #interrupt-cells = <0x2>; + }; + + pcfg_pull_up: pcfg-pull-up { + bias-pull-up; + }; + + pcfg_pull_down: pcfg-pull-down { + bias-pull-down; + }; + + pcfg_pull_none: pcfg-pull-none { + bias-disable; + }; + + pcfg_pull_none_12ma: pcfg-pull-none-12ma { + bias-disable; + drive-strength = <12>; + }; + + pcfg_pull_none_13ma: pcfg-pull-none-13ma { + bias-disable; + drive-strength = <13>; + }; + + pcfg_pull_none_18ma: pcfg-pull-none-18ma { + bias-disable; + drive-strength = <18>; + }; + + pcfg_pull_none_20ma: pcfg-pull-none-20ma { + bias-disable; + drive-strength = <20>; + }; + + pcfg_pull_up_2ma: pcfg-pull-up-2ma { + bias-pull-up; + drive-strength = <2>; + }; + + pcfg_pull_up_8ma: pcfg-pull-up-8ma { + bias-pull-up; + drive-strength = <8>; + }; + + pcfg_pull_up_18ma: pcfg-pull-up-18ma { + bias-pull-up; + drive-strength = <18>; + }; + + pcfg_pull_up_20ma: pcfg-pull-up-20ma { + bias-pull-up; + drive-strength = <20>; + }; + + pcfg_pull_down_4ma: pcfg-pull-down-4ma { + bias-pull-down; + drive-strength = <4>; + }; + + pcfg_pull_down_8ma: pcfg-pull-down-8ma { + bias-pull-down; + drive-strength = <8>; + }; + + pcfg_pull_down_12ma: pcfg-pull-down-12ma { + bias-pull-down; + drive-strength = <12>; + }; + + pcfg_pull_down_18ma: pcfg-pull-down-18ma { + bias-pull-down; + drive-strength = <18>; + }; + + pcfg_pull_down_20ma: pcfg-pull-down-20ma { + bias-pull-down; + drive-strength = <20>; + }; + + pcfg_output_high: pcfg-output-high { + output-high; + }; + + pcfg_output_low: pcfg-output-low { + output-low; + }; + + pcfg_input_enable: pcfg-input-enable { + input-enable; + }; + + pcfg_input_pull_up: pcfg-input-pull-up { + input-enable; + bias-pull-up; + }; + + pcfg_input_pull_down: pcfg-input-pull-down { + input-enable; + bias-pull-down; + }; + + clock { + clk_32k: clk-32k { + rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>; + }; + }; + + cif { + cif_clkin: cif-clkin { + rockchip,pins = + <2 RK_PB2 3 &pcfg_pull_none>; + }; + + cif_clkouta: cif-clkouta { + rockchip,pins = + <2 RK_PB3 3 &pcfg_pull_none>; + }; + }; + + edp { + edp_hpd: edp-hpd { + rockchip,pins = + <4 RK_PC7 2 &pcfg_pull_none>; + }; + }; + + gmac { + rgmii_pins: rgmii-pins { + rockchip,pins = + /* mac_txclk */ + <3 RK_PC1 1 &pcfg_pull_none_13ma>, + /* mac_rxclk */ + <3 RK_PB6 1 &pcfg_pull_none>, + /* mac_mdio */ + <3 RK_PB5 1 &pcfg_pull_none>, + /* mac_txen */ + <3 RK_PB4 1 &pcfg_pull_none_13ma>, + /* mac_clk */ + <3 RK_PB3 1 &pcfg_pull_none>, + /* mac_rxdv */ + <3 RK_PB1 1 &pcfg_pull_none>, + /* mac_mdc */ + <3 RK_PB0 1 &pcfg_pull_none>, + /* mac_rxd1 */ + <3 RK_PA7 1 &pcfg_pull_none>, + /* mac_rxd0 */ + <3 RK_PA6 1 &pcfg_pull_none>, + /* mac_txd1 */ + <3 RK_PA5 1 &pcfg_pull_none_13ma>, + /* mac_txd0 */ + <3 RK_PA4 1 &pcfg_pull_none_13ma>, + /* mac_rxd3 */ + <3 RK_PA3 1 &pcfg_pull_none>, + /* mac_rxd2 */ + <3 RK_PA2 1 &pcfg_pull_none>, + /* mac_txd3 */ + <3 RK_PA1 1 &pcfg_pull_none_13ma>, + /* mac_txd2 */ + <3 RK_PA0 1 &pcfg_pull_none_13ma>; + }; + + rmii_pins: rmii-pins { + rockchip,pins = + /* mac_mdio */ + <3 RK_PB5 1 &pcfg_pull_none>, + /* mac_txen */ + <3 RK_PB4 1 &pcfg_pull_none_13ma>, + /* mac_clk */ + <3 RK_PB3 1 &pcfg_pull_none>, + /* mac_rxer */ + <3 RK_PB2 1 &pcfg_pull_none>, + /* mac_rxdv */ + <3 RK_PB1 1 &pcfg_pull_none>, + /* mac_mdc */ + <3 RK_PB0 1 &pcfg_pull_none>, + /* mac_rxd1 */ + <3 RK_PA7 1 &pcfg_pull_none>, + /* mac_rxd0 */ + <3 RK_PA6 1 &pcfg_pull_none>, + /* mac_txd1 */ + <3 RK_PA5 1 &pcfg_pull_none_13ma>, + /* mac_txd0 */ + <3 RK_PA4 1 &pcfg_pull_none_13ma>; + }; + }; + + i2c0 { + i2c0_xfer: i2c0-xfer { + rockchip,pins = + <1 RK_PB7 2 &pcfg_pull_none>, + <1 RK_PC0 2 &pcfg_pull_none>; + }; + }; + + i2c1 { + i2c1_xfer: i2c1-xfer { + rockchip,pins = + <4 RK_PA2 1 &pcfg_pull_none>, + <4 RK_PA1 1 &pcfg_pull_none>; + }; + }; + + i2c2 { + i2c2_xfer: i2c2-xfer { + rockchip,pins = + <2 RK_PA1 2 &pcfg_pull_none_12ma>, + <2 RK_PA0 2 &pcfg_pull_none_12ma>; + }; + }; + + i2c3 { + i2c3_xfer: i2c3-xfer { + rockchip,pins = + <4 RK_PC1 1 &pcfg_pull_none>, + <4 RK_PC0 1 &pcfg_pull_none>; + }; + }; + + i2c4 { + i2c4_xfer: i2c4-xfer { + rockchip,pins = + <1 RK_PB4 1 &pcfg_pull_none>, + <1 RK_PB3 1 &pcfg_pull_none>; + }; + }; + + i2c5 { + i2c5_xfer: i2c5-xfer { + rockchip,pins = + <3 RK_PB3 2 &pcfg_pull_none>, + <3 RK_PB2 2 &pcfg_pull_none>; + }; + }; + + i2c6 { + i2c6_xfer: i2c6-xfer { + rockchip,pins = + <2 RK_PB2 2 &pcfg_pull_none>, + <2 RK_PB1 2 &pcfg_pull_none>; + }; + }; + + i2c7 { + i2c7_xfer: i2c7-xfer { + rockchip,pins = + <2 RK_PB0 2 &pcfg_pull_none>, + <2 RK_PA7 2 &pcfg_pull_none>; + }; + }; + + i2c8 { + i2c8_xfer: i2c8-xfer { + rockchip,pins = + <1 RK_PC5 1 &pcfg_pull_none>, + <1 RK_PC4 1 &pcfg_pull_none>; + }; + }; + + i2s0 { + i2s0_2ch_bus: i2s0-2ch-bus { + rockchip,pins = + <3 RK_PD0 1 &pcfg_pull_none>, + <3 RK_PD1 1 &pcfg_pull_none>, + <3 RK_PD2 1 &pcfg_pull_none>, + <3 RK_PD3 1 &pcfg_pull_none>, + <3 RK_PD7 1 &pcfg_pull_none>, + <4 RK_PA0 1 &pcfg_pull_none>; + }; + + i2s0_2ch_bus_bclk_off: i2s0-2ch-bus-bclk-off { + rockchip,pins = + <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>, + <3 RK_PD1 1 &pcfg_pull_none>, + <3 RK_PD2 1 &pcfg_pull_none>, + <3 RK_PD3 1 &pcfg_pull_none>, + <3 RK_PD7 1 &pcfg_pull_none>, + <4 RK_PA0 1 &pcfg_pull_none>; + }; + + i2s0_8ch_bus: i2s0-8ch-bus { + rockchip,pins = + <3 RK_PD0 1 &pcfg_pull_none>, + <3 RK_PD1 1 &pcfg_pull_none>, + <3 RK_PD2 1 &pcfg_pull_none>, + <3 RK_PD3 1 &pcfg_pull_none>, + <3 RK_PD4 1 &pcfg_pull_none>, + <3 RK_PD5 1 &pcfg_pull_none>, + <3 RK_PD6 1 &pcfg_pull_none>, + <3 RK_PD7 1 &pcfg_pull_none>, + <4 RK_PA0 1 &pcfg_pull_none>; + }; + + i2s0_8ch_bus_bclk_off: i2s0-8ch-bus-bclk-off { + rockchip,pins = + <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>, + <3 RK_PD1 1 &pcfg_pull_none>, + <3 RK_PD2 1 &pcfg_pull_none>, + <3 RK_PD3 1 &pcfg_pull_none>, + <3 RK_PD4 1 &pcfg_pull_none>, + <3 RK_PD5 1 &pcfg_pull_none>, + <3 RK_PD6 1 &pcfg_pull_none>, + <3 RK_PD7 1 &pcfg_pull_none>, + <4 RK_PA0 1 &pcfg_pull_none>; + }; + }; + + i2s1 { + i2s1_2ch_bus: i2s1-2ch-bus { + rockchip,pins = + <4 RK_PA3 1 &pcfg_pull_none>, + <4 RK_PA4 1 &pcfg_pull_none>, + <4 RK_PA5 1 &pcfg_pull_none>, + <4 RK_PA6 1 &pcfg_pull_none>, + <4 RK_PA7 1 &pcfg_pull_none>; + }; + + i2s1_2ch_bus_bclk_off: i2s1-2ch-bus-bclk-off { + rockchip,pins = + <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>, + <4 RK_PA4 1 &pcfg_pull_none>, + <4 RK_PA5 1 &pcfg_pull_none>, + <4 RK_PA6 1 &pcfg_pull_none>, + <4 RK_PA7 1 &pcfg_pull_none>; + }; + }; + + sdio0 { + sdio0_bus1: sdio0-bus1 { + rockchip,pins = + <2 RK_PC4 1 &pcfg_pull_up>; + }; + + sdio0_bus4: sdio0-bus4 { + rockchip,pins = + <2 RK_PC4 1 &pcfg_pull_up>, + <2 RK_PC5 1 &pcfg_pull_up>, + <2 RK_PC6 1 &pcfg_pull_up>, + <2 RK_PC7 1 &pcfg_pull_up>; + }; + + sdio0_cmd: sdio0-cmd { + rockchip,pins = + <2 RK_PD0 1 &pcfg_pull_up>; + }; + + sdio0_clk: sdio0-clk { + rockchip,pins = + <2 RK_PD1 1 &pcfg_pull_none>; + }; + + sdio0_cd: sdio0-cd { + rockchip,pins = + <2 RK_PD2 1 &pcfg_pull_up>; + }; + + sdio0_pwr: sdio0-pwr { + rockchip,pins = + <2 RK_PD3 1 &pcfg_pull_up>; + }; + + sdio0_bkpwr: sdio0-bkpwr { + rockchip,pins = + <2 RK_PD4 1 &pcfg_pull_up>; + }; + + sdio0_wp: sdio0-wp { + rockchip,pins = + <0 RK_PA3 1 &pcfg_pull_up>; + }; + + sdio0_int: sdio0-int { + rockchip,pins = + <0 RK_PA4 1 &pcfg_pull_up>; + }; + }; + + sdmmc { + sdmmc_bus1: sdmmc-bus1 { + rockchip,pins = + <4 RK_PB0 1 &pcfg_pull_up>; + }; + + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = + <4 RK_PB0 1 &pcfg_pull_up>, + <4 RK_PB1 1 &pcfg_pull_up>, + <4 RK_PB2 1 &pcfg_pull_up>, + <4 RK_PB3 1 &pcfg_pull_up>; + }; + + sdmmc_clk: sdmmc-clk { + rockchip,pins = + <4 RK_PB4 1 &pcfg_pull_none>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = + <4 RK_PB5 1 &pcfg_pull_up>; + }; + + sdmmc_cd: sdmmc-cd { + rockchip,pins = + <0 RK_PA7 1 &pcfg_pull_up>; + }; + + sdmmc_wp: sdmmc-wp { + rockchip,pins = + <0 RK_PB0 1 &pcfg_pull_up>; + }; + }; + + suspend { + ap_pwroff: ap-pwroff { + rockchip,pins = <1 RK_PA5 1 &pcfg_pull_none>; + }; + + ddrio_pwroff: ddrio-pwroff { + rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>; + }; + }; + + spdif { + spdif_bus: spdif-bus { + rockchip,pins = + <4 RK_PC5 1 &pcfg_pull_none>; + }; + + spdif_bus_1: spdif-bus-1 { + rockchip,pins = + <3 RK_PC0 3 &pcfg_pull_none>; + }; + }; + + spi0 { + spi0_clk: spi0-clk { + rockchip,pins = + <3 RK_PA6 2 &pcfg_pull_up>; + }; + spi0_cs0: spi0-cs0 { + rockchip,pins = + <3 RK_PA7 2 &pcfg_pull_up>; + }; + spi0_cs1: spi0-cs1 { + rockchip,pins = + <3 RK_PB0 2 &pcfg_pull_up>; + }; + spi0_tx: spi0-tx { + rockchip,pins = + <3 RK_PA5 2 &pcfg_pull_up>; + }; + spi0_rx: spi0-rx { + rockchip,pins = + <3 RK_PA4 2 &pcfg_pull_up>; + }; + }; + + spi1 { + spi1_clk: spi1-clk { + rockchip,pins = + <1 RK_PB1 2 &pcfg_pull_up>; + }; + spi1_cs0: spi1-cs0 { + rockchip,pins = + <1 RK_PB2 2 &pcfg_pull_up>; + }; + spi1_rx: spi1-rx { + rockchip,pins = + <1 RK_PA7 2 &pcfg_pull_up>; + }; + spi1_tx: spi1-tx { + rockchip,pins = + <1 RK_PB0 2 &pcfg_pull_up>; + }; + }; + + spi2 { + spi2_clk: spi2-clk { + rockchip,pins = + <2 RK_PB3 1 &pcfg_pull_up>; + }; + spi2_cs0: spi2-cs0 { + rockchip,pins = + <2 RK_PB4 1 &pcfg_pull_up>; + }; + spi2_rx: spi2-rx { + rockchip,pins = + <2 RK_PB1 1 &pcfg_pull_up>; + }; + spi2_tx: spi2-tx { + rockchip,pins = + <2 RK_PB2 1 &pcfg_pull_up>; + }; + }; + + spi3 { + spi3_clk: spi3-clk { + rockchip,pins = + <1 RK_PC1 1 &pcfg_pull_up>; + }; + spi3_cs0: spi3-cs0 { + rockchip,pins = + <1 RK_PC2 1 &pcfg_pull_up>; + }; + spi3_rx: spi3-rx { + rockchip,pins = + <1 RK_PB7 1 &pcfg_pull_up>; + }; + spi3_tx: spi3-tx { + rockchip,pins = + <1 RK_PC0 1 &pcfg_pull_up>; + }; + }; + + spi4 { + spi4_clk: spi4-clk { + rockchip,pins = + <3 RK_PA2 2 &pcfg_pull_up>; + }; + spi4_cs0: spi4-cs0 { + rockchip,pins = + <3 RK_PA3 2 &pcfg_pull_up>; + }; + spi4_rx: spi4-rx { + rockchip,pins = + <3 RK_PA0 2 &pcfg_pull_up>; + }; + spi4_tx: spi4-tx { + rockchip,pins = + <3 RK_PA1 2 &pcfg_pull_up>; + }; + }; + + spi5 { + spi5_clk: spi5-clk { + rockchip,pins = + <2 RK_PC6 2 &pcfg_pull_up>; + }; + spi5_cs0: spi5-cs0 { + rockchip,pins = + <2 RK_PC7 2 &pcfg_pull_up>; + }; + spi5_rx: spi5-rx { + rockchip,pins = + <2 RK_PC4 2 &pcfg_pull_up>; + }; + spi5_tx: spi5-tx { + rockchip,pins = + <2 RK_PC5 2 &pcfg_pull_up>; + }; + }; + + testclk { + test_clkout0: test-clkout0 { + rockchip,pins = + <0 RK_PA0 1 &pcfg_pull_none>; + }; + + test_clkout1: test-clkout1 { + rockchip,pins = + <2 RK_PD1 2 &pcfg_pull_none>; + }; + + test_clkout2: test-clkout2 { + rockchip,pins = + <0 RK_PB0 3 &pcfg_pull_none>; + }; + }; + + tsadc { + otp_pin: otp-pin { + rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + otp_out: otp-out { + rockchip,pins = <1 RK_PA6 1 &pcfg_pull_none>; + }; + }; + + uart0 { + uart0_xfer: uart0-xfer { + rockchip,pins = + <2 RK_PC0 1 &pcfg_pull_up>, + <2 RK_PC1 1 &pcfg_pull_none>; + }; + + uart0_cts: uart0-cts { + rockchip,pins = + <2 RK_PC2 1 &pcfg_pull_none>; + }; + + uart0_rts: uart0-rts { + rockchip,pins = + <2 RK_PC3 1 &pcfg_pull_none>; + }; + }; + + uart1 { + uart1_xfer: uart1-xfer { + rockchip,pins = + <3 RK_PB4 2 &pcfg_pull_up>, + <3 RK_PB5 2 &pcfg_pull_none>; + }; + }; + + uart2a { + uart2a_xfer: uart2a-xfer { + rockchip,pins = + <4 RK_PB0 2 &pcfg_pull_up>, + <4 RK_PB1 2 &pcfg_pull_none>; + }; + }; + + uart2b { + uart2b_xfer: uart2b-xfer { + rockchip,pins = + <4 RK_PC0 2 &pcfg_pull_up>, + <4 RK_PC1 2 &pcfg_pull_none>; + }; + }; + + uart2c { + uart2c_xfer: uart2c-xfer { + rockchip,pins = + <4 RK_PC3 1 &pcfg_pull_up>, + <4 RK_PC4 1 &pcfg_pull_none>; + }; + }; + + uart3 { + uart3_xfer: uart3-xfer { + rockchip,pins = + <3 RK_PB6 2 &pcfg_pull_up>, + <3 RK_PB7 2 &pcfg_pull_none>; + }; + + uart3_cts: uart3-cts { + rockchip,pins = + <3 RK_PC0 2 &pcfg_pull_none>; + }; + + uart3_rts: uart3-rts { + rockchip,pins = + <3 RK_PC1 2 &pcfg_pull_none>; + }; + }; + + uart4 { + uart4_xfer: uart4-xfer { + rockchip,pins = + <1 RK_PA7 1 &pcfg_pull_up>, + <1 RK_PB0 1 &pcfg_pull_none>; + }; + }; + + uarthdcp { + uarthdcp_xfer: uarthdcp-xfer { + rockchip,pins = + <4 RK_PC5 2 &pcfg_pull_up>, + <4 RK_PC6 2 &pcfg_pull_none>; + }; + }; + + pwm0 { + pwm0_pin: pwm0-pin { + rockchip,pins = + <4 RK_PC2 1 &pcfg_pull_none>; + }; + + pwm0_pin_pull_down: pwm0-pin-pull-down { + rockchip,pins = + <4 RK_PC2 1 &pcfg_pull_down>; + }; + + vop0_pwm_pin: vop0-pwm-pin { + rockchip,pins = + <4 RK_PC2 2 &pcfg_pull_none>; + }; + + vop1_pwm_pin: vop1-pwm-pin { + rockchip,pins = + <4 RK_PC2 3 &pcfg_pull_none>; + }; + }; + + pwm1 { + pwm1_pin: pwm1-pin { + rockchip,pins = + <4 RK_PC6 1 &pcfg_pull_none>; + }; + + pwm1_pin_pull_down: pwm1-pin-pull-down { + rockchip,pins = + <4 RK_PC6 1 &pcfg_pull_down>; + }; + }; + + pwm2 { + pwm2_pin: pwm2-pin { + rockchip,pins = + <1 RK_PC3 1 &pcfg_pull_none>; + }; + + pwm2_pin_pull_down: pwm2-pin-pull-down { + rockchip,pins = + <1 RK_PC3 1 &pcfg_pull_down>; + }; + }; + + pwm3a { + pwm3a_pin: pwm3a-pin { + rockchip,pins = + <0 RK_PA6 1 &pcfg_pull_none>; + }; + }; + + pwm3b { + pwm3b_pin: pwm3b-pin { + rockchip,pins = + <1 RK_PB6 1 &pcfg_pull_none>; + }; + }; + + hdmi { + hdmi_i2c_xfer: hdmi-i2c-xfer { + rockchip,pins = + <4 RK_PC1 3 &pcfg_pull_none>, + <4 RK_PC0 3 &pcfg_pull_none>; + }; + + hdmi_cec: hdmi-cec { + rockchip,pins = + <4 RK_PC7 1 &pcfg_pull_none>; + }; + }; + + pcie { + pcie_clkreqn_cpm: pci-clkreqn-cpm { + rockchip,pins = + <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie_clkreqnb_cpm: pci-clkreqnb-cpm { + rockchip,pins = + <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts b/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts index 173da81fc231..1489eb32e266 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts @@ -8,7 +8,6 @@ #include <dt-bindings/pwm/pwm.h> #include <dt-bindings/usb/pd.h> #include "rk3399.dtsi" -#include "rk3399-opp.dtsi" / { model = "OPEN AI LAB EAIDK-610"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts index 55eca7a50a1f..54e67d2dac09 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts @@ -5,7 +5,7 @@ /dts-v1/; #include <dt-bindings/pwm/pwm.h> -#include "rk3399.dtsi" +#include "rk3399-base.dtsi" / { model = "Rockchip RK3399 Evaluation Board"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts index 260415d99aeb..f4491317a1b0 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts @@ -9,7 +9,6 @@ #include <dt-bindings/pwm/pwm.h> #include <dt-bindings/usb/pd.h> #include "rk3399.dtsi" -#include "rk3399-opp.dtsi" / { model = "Firefly-RK3399 Board"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi index 3cd63d1e8f15..776c0eec04d7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi @@ -6,8 +6,7 @@ */ #include <dt-bindings/input/input.h> -#include "rk3399.dtsi" -#include "rk3399-op1-opp.dtsi" +#include "rk3399-op1.dtsi" / { aliases { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts index 4a6ab6c2e24c..5a02502d21cd 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts @@ -4,7 +4,6 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include "rk3399.dtsi" -#include "rk3399-opp.dtsi" / { model = "Hugsun X99 TV BOX"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi index 9d9297bc5f04..c772985ae4e5 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi @@ -9,7 +9,6 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pwm/pwm.h> #include "rk3399.dtsi" -#include "rk3399-opp.dtsi" / { aliases { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts index 9586bb12a5d8..b0c1fb0b704e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts @@ -12,7 +12,6 @@ /dts-v1/; #include "rk3399.dtsi" -#include "rk3399-opp.dtsi" / { model = "Kobol Helios64"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts index cb69e2145fa9..f12b1eb00575 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts @@ -8,7 +8,6 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pwm/pwm.h> #include "rk3399.dtsi" -#include "rk3399-opp.dtsi" / { model = "Leez RK3399 P710"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi index b7f1e47978a6..7debc4a1b5fa 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi @@ -14,7 +14,6 @@ /dts-v1/; #include <dt-bindings/input/linux-event-codes.h> #include "rk3399.dtsi" -#include "rk3399-opp.dtsi" / { aliases { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-op1.dtsi index 783120e9cebe..b24bff511513 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-op1.dtsi @@ -3,6 +3,8 @@ * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd */ +#include "rk3399.dtsi" + / { cluster0_opp: opp-table-0 { compatible = "operating-points-v2"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi deleted file mode 100644 index fee5e7111279..000000000000 --- a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi +++ /dev/null @@ -1,133 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd - */ - -/ { - cluster0_opp: opp-table-0 { - compatible = "operating-points-v2"; - opp-shared; - - opp00 { - opp-hz = /bits/ 64 <408000000>; - opp-microvolt = <825000 825000 1250000>; - clock-latency-ns = <40000>; - }; - opp01 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <825000 825000 1250000>; - }; - opp02 { - opp-hz = /bits/ 64 <816000000>; - opp-microvolt = <850000 850000 1250000>; - }; - opp03 { - opp-hz = /bits/ 64 <1008000000>; - opp-microvolt = <925000 925000 1250000>; - }; - opp04 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <1000000 1000000 1250000>; - }; - opp05 { - opp-hz = /bits/ 64 <1416000000>; - opp-microvolt = <1125000 1125000 1250000>; - }; - }; - - cluster1_opp: opp-table-1 { - compatible = "operating-points-v2"; - opp-shared; - - opp00 { - opp-hz = /bits/ 64 <408000000>; - opp-microvolt = <825000 825000 1250000>; - clock-latency-ns = <40000>; - }; - opp01 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <825000 825000 1250000>; - }; - opp02 { - opp-hz = /bits/ 64 <816000000>; - opp-microvolt = <825000 825000 1250000>; - }; - opp03 { - opp-hz = /bits/ 64 <1008000000>; - opp-microvolt = <875000 875000 1250000>; - }; - opp04 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <950000 950000 1250000>; - }; - opp05 { - opp-hz = /bits/ 64 <1416000000>; - opp-microvolt = <1025000 1025000 1250000>; - }; - opp06 { - opp-hz = /bits/ 64 <1608000000>; - opp-microvolt = <1100000 1100000 1250000>; - }; - opp07 { - opp-hz = /bits/ 64 <1800000000>; - opp-microvolt = <1200000 1200000 1250000>; - }; - }; - - gpu_opp_table: opp-table-2 { - compatible = "operating-points-v2"; - - opp00 { - opp-hz = /bits/ 64 <200000000>; - opp-microvolt = <825000 825000 1150000>; - }; - opp01 { - opp-hz = /bits/ 64 <297000000>; - opp-microvolt = <825000 825000 1150000>; - }; - opp02 { - opp-hz = /bits/ 64 <400000000>; - opp-microvolt = <825000 825000 1150000>; - }; - opp03 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <875000 875000 1150000>; - }; - opp04 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <925000 925000 1150000>; - }; - opp05 { - opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <1100000 1100000 1150000>; - }; - }; -}; - -&cpu_l0 { - operating-points-v2 = <&cluster0_opp>; -}; - -&cpu_l1 { - operating-points-v2 = <&cluster0_opp>; -}; - -&cpu_l2 { - operating-points-v2 = <&cluster0_opp>; -}; - -&cpu_l3 { - operating-points-v2 = <&cluster0_opp>; -}; - -&cpu_b0 { - operating-points-v2 = <&cluster1_opp>; -}; - -&cpu_b1 { - operating-points-v2 = <&cluster1_opp>; -}; - -&gpu { - operating-points-v2 = <&gpu_opp_table>; -}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts index e26e2d86279c..07ec33f3f55f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts @@ -10,7 +10,6 @@ #include <dt-bindings/interrupt-controller/irq.h> #include "dt-bindings/usb/pd.h" #include "rk3399.dtsi" -#include "rk3399-opp.dtsi" / { model = "Orange Pi RK3399 Board"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts index 294eb2de263d..a5a7e374bc59 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts @@ -12,7 +12,6 @@ #include <dt-bindings/usb/pd.h> #include <dt-bindings/leds/common.h> #include "rk3399.dtsi" -#include "rk3399-opp.dtsi" / { model = "Pine64 Pinebook Pro"; @@ -32,12 +31,12 @@ backlight: edp-backlight { compatible = "pwm-backlight"; power-supply = <&vcc_12v>; - pwms = <&pwm0 0 740740 0>; + pwms = <&pwm0 0 125000 0>; }; bat: battery { compatible = "simple-battery"; - charge-full-design-microamp-hours = <9800000>; + charge-full-design-microamp-hours = <10000000>; voltage-max-design-microvolt = <4350000>; voltage-min-design-microvolt = <3000000>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts index ef754ea30a94..1a44582a49fb 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts @@ -14,7 +14,6 @@ #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/leds/common.h> #include "rk3399.dtsi" -#include "rk3399-opp.dtsi" / { model = "Pine64 PinePhone Pro"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index d24444cdf54a..650b1ba9c192 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -5,7 +5,6 @@ #include <dt-bindings/pwm/pwm.h> #include "rk3399.dtsi" -#include "rk3399-opp.dtsi" / { aliases { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi index ca7a446b6568..d95b1cde1fc3 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi @@ -7,7 +7,6 @@ #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/pwm/pwm.h> #include "rk3399.dtsi" -#include "rk3399-opp.dtsi" / { model = "Firefly ROC-RK3399-PC Board"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts index 972aea843afd..475d57f64d58 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts @@ -7,8 +7,7 @@ /dts-v1/; #include <dt-bindings/leds/common.h> -#include "rk3399.dtsi" -#include "rk3399-t-opp.dtsi" +#include "rk3399-t.dtsi" / { model = "Radxa ROCK 4C+"; @@ -53,6 +52,21 @@ }; }; + rk809-sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,name = "Analog RK809"; + simple-audio-card,mclk-fs = <256>; + + simple-audio-card,cpu { + sound-dai = <&i2s0>; + }; + + simple-audio-card,codec { + sound-dai = <&rk809>; + }; + }; + sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&rk809 1>; @@ -201,10 +215,13 @@ interrupt-parent = <&gpio1>; interrupts = <RK_PC5 IRQ_TYPE_LEVEL_LOW>; #clock-cells = <1>; + clock-names = "mclk"; + clocks = <&cru SCLK_I2S_8CH_OUT>; clock-output-names = "rk808-clkout1", "rk808-clkout2"; pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>; + pinctrl-0 = <&pmic_int_l>, <&i2s_8ch_mclk>; rockchip,system-power-controller; + #sound-dai-cells = <0>; wakeup-source; vcc1-supply = <&vcc5v0_sys>; @@ -446,6 +463,26 @@ status = "okay"; }; +&i2s0 { + status = "okay"; +}; + +&i2s0_8ch_bus { + rockchip,pins = + <3 RK_PD0 1 &pcfg_pull_none>, + <3 RK_PD2 1 &pcfg_pull_none>, + <3 RK_PD3 1 &pcfg_pull_none>, + <3 RK_PD7 1 &pcfg_pull_none>; +}; + +&i2s0_8ch_bus_bclk_off { + rockchip,pins = + <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>, + <3 RK_PD2 1 &pcfg_pull_none>, + <3 RK_PD3 1 &pcfg_pull_none>, + <3 RK_PD7 1 &pcfg_pull_none>; +}; + &i2s2 { status = "okay"; }; @@ -473,6 +510,12 @@ }; }; + i2s0 { + i2s_8ch_mclk: i2s-8ch-mclk { + rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>; + }; + }; + leds { user_led1: user-led1 { rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-4se.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-4se.dts index 7cfc198bbae7..a8b8d4acc337 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-4se.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-4se.dts @@ -5,8 +5,8 @@ */ /dts-v1/; +#include "rk3399-t.dtsi" #include "rk3399-rock-pi-4.dtsi" -#include "rk3399-t-opp.dtsi" / { model = "Radxa ROCK 4SE"; @@ -17,14 +17,6 @@ }; }; -&pinctrl { - usb2 { - vcc5v0_host_en: vcc5v0-host-en { - rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - &sdio0 { status = "okay"; @@ -56,10 +48,3 @@ vddio-supply = <&vcc_1v8>; }; }; - -&vcc5v0_host { - enable-active-high; - gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_host_en>; -}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi index b9d6284bb804..9666504cd1c1 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi @@ -4,11 +4,9 @@ * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com> */ -/dts-v1/; #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/leds/common.h> #include <dt-bindings/pwm/pwm.h> -#include "rk3399.dtsi" / { aliases { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a-plus.dts index f5a68d8d072d..725ac3c1f6f6 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a-plus.dts @@ -5,8 +5,8 @@ */ /dts-v1/; +#include "rk3399-op1.dtsi" #include "rk3399-rock-pi-4.dtsi" -#include "rk3399-op1-opp.dtsi" / { model = "Radxa ROCK Pi 4A+"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a.dts index c68f45849c44..32d6bce5e3d4 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a.dts @@ -5,8 +5,8 @@ */ /dts-v1/; +#include "rk3399.dtsi" #include "rk3399-rock-pi-4.dtsi" -#include "rk3399-opp.dtsi" / { model = "Radxa ROCK Pi 4A"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b-plus.dts index 8a17c1eaae15..682e8b7297c1 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b-plus.dts @@ -5,8 +5,8 @@ */ /dts-v1/; +#include "rk3399-op1.dtsi" #include "rk3399-rock-pi-4.dtsi" -#include "rk3399-op1-opp.dtsi" / { model = "Radxa ROCK Pi 4B+"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts index 6ea3180e57ca..55285c7c6e54 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts @@ -5,8 +5,8 @@ */ /dts-v1/; +#include "rk3399.dtsi" #include "rk3399-rock-pi-4.dtsi" -#include "rk3399-opp.dtsi" / { model = "Radxa ROCK Pi 4B"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts index 5274938bf1b8..82ad2ca6b5c2 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts @@ -6,8 +6,8 @@ */ /dts-v1/; +#include "rk3399.dtsi" #include "rk3399-rock-pi-4.dtsi" -#include "rk3399-opp.dtsi" / { model = "Radxa ROCK Pi 4C"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi index c920ddf44baf..8146f870d2bd 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi @@ -5,9 +5,8 @@ * Copyright (c) 2018 Linaro Ltd. */ -#include "rk3399.dtsi" -#include "rk3399-opp.dtsi" #include <dt-bindings/interrupt-controller/irq.h> +#include "rk3399.dtsi" / { aliases { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi index f30b82a10ca3..11d99d8b34a2 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi @@ -7,7 +7,6 @@ #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/pwm/pwm.h> #include "rk3399.dtsi" -#include "rk3399-opp.dtsi" / { aliases { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi index b3ef1c85e754..31832aae9ab6 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi @@ -6,7 +6,6 @@ #include "dt-bindings/pwm/pwm.h" #include "dt-bindings/input/input.h" #include "rk3399.dtsi" -#include "rk3399-opp.dtsi" / { compatible = "rockchip,rk3399-sapphire", "rockchip,rk3399"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-t-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-t.dtsi index 1ababadda9df..72989f03fcb1 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-t-opp.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-t.dtsi @@ -4,6 +4,8 @@ * Copyright (c) 2022 Radxa Limited */ +#include "rk3399-base.dtsi" + / { cluster0_opp: opp-table-0 { compatible = "operating-points-v2"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 9d5f5b083e3c..6bc1249d99e6 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -1,3019 +1,135 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* - * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd + * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd */ -#include <dt-bindings/clock/rk3399-cru.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pinctrl/rockchip.h> -#include <dt-bindings/power/rk3399-power.h> -#include <dt-bindings/thermal/thermal.h> +#include "rk3399-base.dtsi" / { - compatible = "rockchip,rk3399"; + cluster0_opp: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - - aliases { - gpio0 = &gpio0; - gpio1 = &gpio1; - gpio2 = &gpio2; - gpio3 = &gpio3; - gpio4 = &gpio4; - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - i2c3 = &i2c3; - i2c4 = &i2c4; - i2c5 = &i2c5; - i2c6 = &i2c6; - i2c7 = &i2c7; - i2c8 = &i2c8; - serial0 = &uart0; - serial1 = &uart1; - serial2 = &uart2; - serial3 = &uart3; - serial4 = &uart4; - spi0 = &spi0; - spi1 = &spi1; - spi2 = &spi2; - spi3 = &spi3; - spi4 = &spi4; - spi5 = &spi5; - }; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - cpu-map { - cluster0 { /* Cortex-A53 */ - core0 { - cpu = <&cpu_l0>; - }; - core1 { - cpu = <&cpu_l1>; - }; - core2 { - cpu = <&cpu_l2>; - }; - core3 { - cpu = <&cpu_l3>; - }; - }; - - cluster1 { /* Cortex-A72 */ - core0 { - cpu = <&cpu_b0>; - }; - core1 { - cpu = <&cpu_b1>; - }; - }; + opp00 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <825000 825000 1250000>; + clock-latency-ns = <40000>; }; - - cpu_l0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x0>; - enable-method = "psci"; - capacity-dmips-mhz = <485>; - clocks = <&cru ARMCLKL>; - #cooling-cells = <2>; /* min followed by max */ - dynamic-power-coefficient = <100>; - cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; - i-cache-size = <0x8000>; - i-cache-line-size = <64>; - i-cache-sets = <256>; - d-cache-size = <0x8000>; - d-cache-line-size = <64>; - d-cache-sets = <128>; - next-level-cache = <&l2_cache_l>; - }; - - cpu_l1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x1>; - enable-method = "psci"; - capacity-dmips-mhz = <485>; - clocks = <&cru ARMCLKL>; - #cooling-cells = <2>; /* min followed by max */ - dynamic-power-coefficient = <100>; - cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; - i-cache-size = <0x8000>; - i-cache-line-size = <64>; - i-cache-sets = <256>; - d-cache-size = <0x8000>; - d-cache-line-size = <64>; - d-cache-sets = <128>; - next-level-cache = <&l2_cache_l>; + opp01 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <825000 825000 1250000>; }; - - cpu_l2: cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x2>; - enable-method = "psci"; - capacity-dmips-mhz = <485>; - clocks = <&cru ARMCLKL>; - #cooling-cells = <2>; /* min followed by max */ - dynamic-power-coefficient = <100>; - cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; - i-cache-size = <0x8000>; - i-cache-line-size = <64>; - i-cache-sets = <256>; - d-cache-size = <0x8000>; - d-cache-line-size = <64>; - d-cache-sets = <128>; - next-level-cache = <&l2_cache_l>; - }; - - cpu_l3: cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x3>; - enable-method = "psci"; - capacity-dmips-mhz = <485>; - clocks = <&cru ARMCLKL>; - #cooling-cells = <2>; /* min followed by max */ - dynamic-power-coefficient = <100>; - cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; - i-cache-size = <0x8000>; - i-cache-line-size = <64>; - i-cache-sets = <256>; - d-cache-size = <0x8000>; - d-cache-line-size = <64>; - d-cache-sets = <128>; - next-level-cache = <&l2_cache_l>; - }; - - cpu_b0: cpu@100 { - device_type = "cpu"; - compatible = "arm,cortex-a72"; - reg = <0x0 0x100>; - enable-method = "psci"; - capacity-dmips-mhz = <1024>; - clocks = <&cru ARMCLKB>; - #cooling-cells = <2>; /* min followed by max */ - dynamic-power-coefficient = <436>; - cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; - i-cache-size = <0xC000>; - i-cache-line-size = <64>; - i-cache-sets = <256>; - d-cache-size = <0x8000>; - d-cache-line-size = <64>; - d-cache-sets = <256>; - next-level-cache = <&l2_cache_b>; - - thermal-idle { - #cooling-cells = <2>; - duration-us = <10000>; - exit-latency-us = <500>; - }; - }; - - cpu_b1: cpu@101 { - device_type = "cpu"; - compatible = "arm,cortex-a72"; - reg = <0x0 0x101>; - enable-method = "psci"; - capacity-dmips-mhz = <1024>; - clocks = <&cru ARMCLKB>; - #cooling-cells = <2>; /* min followed by max */ - dynamic-power-coefficient = <436>; - cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; - i-cache-size = <0xC000>; - i-cache-line-size = <64>; - i-cache-sets = <256>; - d-cache-size = <0x8000>; - d-cache-line-size = <64>; - d-cache-sets = <256>; - next-level-cache = <&l2_cache_b>; - - thermal-idle { - #cooling-cells = <2>; - duration-us = <10000>; - exit-latency-us = <500>; - }; + opp02 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <850000 850000 1250000>; }; - - l2_cache_l: l2-cache-cluster0 { - compatible = "cache"; - cache-level = <2>; - cache-unified; - cache-size = <0x80000>; - cache-line-size = <64>; - cache-sets = <512>; + opp03 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <925000 925000 1250000>; }; - - l2_cache_b: l2-cache-cluster1 { - compatible = "cache"; - cache-level = <2>; - cache-unified; - cache-size = <0x100000>; - cache-line-size = <64>; - cache-sets = <1024>; + opp04 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1000000 1000000 1250000>; }; - - idle-states { - entry-method = "psci"; - - CPU_SLEEP: cpu-sleep { - compatible = "arm,idle-state"; - local-timer-stop; - arm,psci-suspend-param = <0x0010000>; - entry-latency-us = <120>; - exit-latency-us = <250>; - min-residency-us = <900>; - }; - - CLUSTER_SLEEP: cluster-sleep { - compatible = "arm,idle-state"; - local-timer-stop; - arm,psci-suspend-param = <0x1010000>; - entry-latency-us = <400>; - exit-latency-us = <500>; - min-residency-us = <2000>; - }; + opp05 { + opp-hz = /bits/ 64 <1416000000>; + opp-microvolt = <1125000 1125000 1250000>; }; }; - display-subsystem { - compatible = "rockchip,display-subsystem"; - ports = <&vopl_out>, <&vopb_out>; - }; - - dmc: memory-controller { - compatible = "rockchip,rk3399-dmc"; - rockchip,pmu = <&pmugrf>; - devfreq-events = <&dfi>; - clocks = <&cru SCLK_DDRC>; - clock-names = "dmc_clk"; - status = "disabled"; - }; + cluster1_opp: opp-table-1 { + compatible = "operating-points-v2"; + opp-shared; - pmu_a53 { - compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster0>; - }; - - pmu_a72 { - compatible = "arm,cortex-a72-pmu"; - interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster1>; - }; - - psci { - compatible = "arm,psci-1.0"; - method = "smc"; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>, - <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>, - <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>, - <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>; - arm,no-tick-in-suspend; - }; - - xin24m: xin24m { - compatible = "fixed-clock"; - clock-frequency = <24000000>; - clock-output-names = "xin24m"; - #clock-cells = <0>; - }; - - pcie0: pcie@f8000000 { - compatible = "rockchip,rk3399-pcie"; - reg = <0x0 0xf8000000 0x0 0x2000000>, - <0x0 0xfd000000 0x0 0x1000000>; - reg-names = "axi-base", "apb-base"; - device_type = "pci"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - aspm-no-l0s; - bus-range = <0x0 0x1f>; - clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>, - <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>; - clock-names = "aclk", "aclk-perf", - "hclk", "pm"; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>; - interrupt-names = "sys", "legacy", "client"; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie0_intc 0>, - <0 0 0 2 &pcie0_intc 1>, - <0 0 0 3 &pcie0_intc 2>, - <0 0 0 4 &pcie0_intc 3>; - max-link-speed = <1>; - msi-map = <0x0 &its 0x0 0x1000>; - phys = <&pcie_phy 0>, <&pcie_phy 1>, - <&pcie_phy 2>, <&pcie_phy 3>; - phy-names = "pcie-phy-0", "pcie-phy-1", - "pcie-phy-2", "pcie-phy-3"; - ranges = <0x82000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000>, - <0x81000000 0x0 0xfbe00000 0x0 0xfbe00000 0x0 0x100000>; - resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>, - <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>, - <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, - <&cru SRST_A_PCIE>; - reset-names = "core", "mgmt", "mgmt-sticky", "pipe", - "pm", "pclk", "aclk"; - status = "disabled"; - - pcie0_intc: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; + opp00 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <825000 825000 1250000>; + clock-latency-ns = <40000>; }; - }; - - pcie0_ep: pcie-ep@f8000000 { - compatible = "rockchip,rk3399-pcie-ep"; - reg = <0x0 0xfd000000 0x0 0x1000000>, - <0x0 0xfa000000 0x0 0x2000000>; - reg-names = "apb-base", "mem-base"; - clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>, - <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>; - clock-names = "aclk", "aclk-perf", - "hclk", "pm"; - max-functions = /bits/ 8 <8>; - num-lanes = <4>; - resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>, - <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>, - <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, - <&cru SRST_A_PCIE>; - reset-names = "core", "mgmt", "mgmt-sticky", "pipe", - "pm", "pclk", "aclk"; - phys = <&pcie_phy 0>, <&pcie_phy 1>, - <&pcie_phy 2>, <&pcie_phy 3>; - phy-names = "pcie-phy-0", "pcie-phy-1", - "pcie-phy-2", "pcie-phy-3"; - rockchip,max-outbound-regions = <32>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_clkreqnb_cpm>; - status = "disabled"; - }; - - gmac: ethernet@fe300000 { - compatible = "rockchip,rk3399-gmac"; - reg = <0x0 0xfe300000 0x0 0x10000>; - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>; - interrupt-names = "macirq"; - clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX>, - <&cru SCLK_MAC_TX>, <&cru SCLK_MACREF>, - <&cru SCLK_MACREF_OUT>, <&cru ACLK_GMAC>, - <&cru PCLK_GMAC>; - clock-names = "stmmaceth", "mac_clk_rx", - "mac_clk_tx", "clk_mac_ref", - "clk_mac_refout", "aclk_mac", - "pclk_mac"; - power-domains = <&power RK3399_PD_GMAC>; - resets = <&cru SRST_A_GMAC>; - reset-names = "stmmaceth"; - rockchip,grf = <&grf>; - snps,txpbl = <0x4>; - status = "disabled"; - }; - - sdio0: mmc@fe310000 { - compatible = "rockchip,rk3399-dw-mshc", - "rockchip,rk3288-dw-mshc"; - reg = <0x0 0xfe310000 0x0 0x4000>; - interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH 0>; - max-frequency = <150000000>; - clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, - <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; - fifo-depth = <0x100>; - power-domains = <&power RK3399_PD_SDIOAUDIO>; - resets = <&cru SRST_SDIO0>; - reset-names = "reset"; - status = "disabled"; - }; - - sdmmc: mmc@fe320000 { - compatible = "rockchip,rk3399-dw-mshc", - "rockchip,rk3288-dw-mshc"; - reg = <0x0 0xfe320000 0x0 0x4000>; - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>; - max-frequency = <150000000>; - assigned-clocks = <&cru HCLK_SD>; - assigned-clock-rates = <200000000>; - clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, - <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; - fifo-depth = <0x100>; - power-domains = <&power RK3399_PD_SD>; - resets = <&cru SRST_SDMMC>; - reset-names = "reset"; - status = "disabled"; - }; - - sdhci: mmc@fe330000 { - compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1"; - reg = <0x0 0xfe330000 0x0 0x10000>; - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>; - arasan,soc-ctl-syscon = <&grf>; - assigned-clocks = <&cru SCLK_EMMC>; - assigned-clock-rates = <200000000>; - clocks = <&cru SCLK_EMMC>, <&cru ACLK_EMMC>; - clock-names = "clk_xin", "clk_ahb"; - clock-output-names = "emmc_cardclock"; - #clock-cells = <0>; - phys = <&emmc_phy>; - phy-names = "phy_arasan"; - power-domains = <&power RK3399_PD_EMMC>; - disable-cqe-dcmd; - status = "disabled"; - }; - - usb_host0_ehci: usb@fe380000 { - compatible = "generic-ehci"; - reg = <0x0 0xfe380000 0x0 0x20000>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>, - <&u2phy0>; - phys = <&u2phy0_host>; - phy-names = "usb"; - status = "disabled"; - }; - - usb_host0_ohci: usb@fe3a0000 { - compatible = "generic-ohci"; - reg = <0x0 0xfe3a0000 0x0 0x20000>; - interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>, - <&u2phy0>; - phys = <&u2phy0_host>; - phy-names = "usb"; - status = "disabled"; - }; - - usb_host1_ehci: usb@fe3c0000 { - compatible = "generic-ehci"; - reg = <0x0 0xfe3c0000 0x0 0x20000>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>, - <&u2phy1>; - phys = <&u2phy1_host>; - phy-names = "usb"; - status = "disabled"; - }; - - usb_host1_ohci: usb@fe3e0000 { - compatible = "generic-ohci"; - reg = <0x0 0xfe3e0000 0x0 0x20000>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>, - <&u2phy1>; - phys = <&u2phy1_host>; - phy-names = "usb"; - status = "disabled"; - }; - - debug@fe430000 { - compatible = "arm,coresight-cpu-debug", "arm,primecell"; - reg = <0 0xfe430000 0 0x1000>; - clocks = <&cru PCLK_COREDBG_L>; - clock-names = "apb_pclk"; - cpu = <&cpu_l0>; - }; - - debug@fe432000 { - compatible = "arm,coresight-cpu-debug", "arm,primecell"; - reg = <0 0xfe432000 0 0x1000>; - clocks = <&cru PCLK_COREDBG_L>; - clock-names = "apb_pclk"; - cpu = <&cpu_l1>; - }; - - debug@fe434000 { - compatible = "arm,coresight-cpu-debug", "arm,primecell"; - reg = <0 0xfe434000 0 0x1000>; - clocks = <&cru PCLK_COREDBG_L>; - clock-names = "apb_pclk"; - cpu = <&cpu_l2>; - }; - - debug@fe436000 { - compatible = "arm,coresight-cpu-debug", "arm,primecell"; - reg = <0 0xfe436000 0 0x1000>; - clocks = <&cru PCLK_COREDBG_L>; - clock-names = "apb_pclk"; - cpu = <&cpu_l3>; - }; - - debug@fe610000 { - compatible = "arm,coresight-cpu-debug", "arm,primecell"; - reg = <0 0xfe610000 0 0x1000>; - clocks = <&cru PCLK_COREDBG_B>; - clock-names = "apb_pclk"; - cpu = <&cpu_b0>; - }; - - debug@fe710000 { - compatible = "arm,coresight-cpu-debug", "arm,primecell"; - reg = <0 0xfe710000 0 0x1000>; - clocks = <&cru PCLK_COREDBG_B>; - clock-names = "apb_pclk"; - cpu = <&cpu_b1>; - }; - - usbdrd3_0: usb@fe800000 { - compatible = "rockchip,rk3399-dwc3"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>, - <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_RKSOC_AXI_PERF>, - <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>; - clock-names = "ref_clk", "suspend_clk", - "bus_clk", "aclk_usb3_rksoc_axi_perf", - "aclk_usb3", "grf_clk"; - resets = <&cru SRST_A_USB3_OTG0>; - reset-names = "usb3-otg"; - status = "disabled"; - - usbdrd_dwc3_0: usb@fe800000 { - compatible = "snps,dwc3"; - reg = <0x0 0xfe800000 0x0 0x100000>; - interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru SCLK_USB3OTG0_REF>, <&cru ACLK_USB3OTG0>, - <&cru SCLK_USB3OTG0_SUSPEND>; - clock-names = "ref", "bus_early", "suspend"; - dr_mode = "otg"; - phys = <&u2phy0_otg>, <&tcphy0_usb3>; - phy-names = "usb2-phy", "usb3-phy"; - phy_type = "utmi_wide"; - snps,dis_enblslpm_quirk; - snps,dis-u2-freeclk-exists-quirk; - snps,dis_u2_susphy_quirk; - snps,dis-del-phy-power-chg-quirk; - snps,dis-tx-ipgap-linecheck-quirk; - power-domains = <&power RK3399_PD_USB3>; - status = "disabled"; + opp01 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <825000 825000 1250000>; }; - }; - - usbdrd3_1: usb@fe900000 { - compatible = "rockchip,rk3399-dwc3"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - clocks = <&cru SCLK_USB3OTG1_REF>, <&cru SCLK_USB3OTG1_SUSPEND>, - <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_RKSOC_AXI_PERF>, - <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>; - clock-names = "ref_clk", "suspend_clk", - "bus_clk", "aclk_usb3_rksoc_axi_perf", - "aclk_usb3", "grf_clk"; - resets = <&cru SRST_A_USB3_OTG1>; - reset-names = "usb3-otg"; - status = "disabled"; - - usbdrd_dwc3_1: usb@fe900000 { - compatible = "snps,dwc3"; - reg = <0x0 0xfe900000 0x0 0x100000>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru SCLK_USB3OTG1_REF>, <&cru ACLK_USB3OTG1>, - <&cru SCLK_USB3OTG1_SUSPEND>; - clock-names = "ref", "bus_early", "suspend"; - dr_mode = "otg"; - phys = <&u2phy1_otg>, <&tcphy1_usb3>; - phy-names = "usb2-phy", "usb3-phy"; - phy_type = "utmi_wide"; - snps,dis_enblslpm_quirk; - snps,dis-u2-freeclk-exists-quirk; - snps,dis_u2_susphy_quirk; - snps,dis-del-phy-power-chg-quirk; - snps,dis-tx-ipgap-linecheck-quirk; - power-domains = <&power RK3399_PD_USB3>; - status = "disabled"; + opp02 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <825000 825000 1250000>; }; - }; - - cdn_dp: dp@fec00000 { - compatible = "rockchip,rk3399-cdn-dp"; - reg = <0x0 0xfec00000 0x0 0x100000>; - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>; - assigned-clocks = <&cru SCLK_DP_CORE>, <&cru SCLK_SPDIF_REC_DPTX>; - assigned-clock-rates = <100000000>, <200000000>; - clocks = <&cru SCLK_DP_CORE>, <&cru PCLK_DP_CTRL>, - <&cru SCLK_SPDIF_REC_DPTX>, <&cru PCLK_VIO_GRF>; - clock-names = "core-clk", "pclk", "spdif", "grf"; - phys = <&tcphy0_dp>, <&tcphy1_dp>; - power-domains = <&power RK3399_PD_HDCP>; - resets = <&cru SRST_DPTX_SPDIF_REC>, <&cru SRST_P_UPHY0_DPTX>, - <&cru SRST_P_UPHY0_APB>, <&cru SRST_DP_CORE>; - reset-names = "spdif", "dptx", "apb", "core"; - rockchip,grf = <&grf>; - #sound-dai-cells = <1>; - status = "disabled"; - - ports { - dp_in: port { - #address-cells = <1>; - #size-cells = <0>; - - dp_in_vopb: endpoint@0 { - reg = <0>; - remote-endpoint = <&vopb_out_dp>; - }; - - dp_in_vopl: endpoint@1 { - reg = <1>; - remote-endpoint = <&vopl_out_dp>; - }; - }; + opp03 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <875000 875000 1250000>; }; - }; - - gic: interrupt-controller@fee00000 { - compatible = "arm,gic-v3"; - #interrupt-cells = <4>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - interrupt-controller; - - reg = <0x0 0xfee00000 0 0x10000>, /* GICD */ - <0x0 0xfef00000 0 0xc0000>, /* GICR */ - <0x0 0xfff00000 0 0x10000>, /* GICC */ - <0x0 0xfff10000 0 0x10000>, /* GICH */ - <0x0 0xfff20000 0 0x10000>; /* GICV */ - interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>; - its: msi-controller@fee20000 { - compatible = "arm,gic-v3-its"; - msi-controller; - #msi-cells = <1>; - reg = <0x0 0xfee20000 0x0 0x20000>; + opp04 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <950000 950000 1250000>; }; - - ppi-partitions { - ppi_cluster0: interrupt-partition-0 { - affinity = <&cpu_l0 &cpu_l1 &cpu_l2 &cpu_l3>; - }; - - ppi_cluster1: interrupt-partition-1 { - affinity = <&cpu_b0 &cpu_b1>; - }; + opp05 { + opp-hz = /bits/ 64 <1416000000>; + opp-microvolt = <1025000 1025000 1250000>; }; - }; - - saradc: saradc@ff100000 { - compatible = "rockchip,rk3399-saradc"; - reg = <0x0 0xff100000 0x0 0x100>; - interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH 0>; - #io-channel-cells = <1>; - clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; - clock-names = "saradc", "apb_pclk"; - resets = <&cru SRST_P_SARADC>; - reset-names = "saradc-apb"; - status = "disabled"; - }; - - crypto0: crypto@ff8b0000 { - compatible = "rockchip,rk3399-crypto"; - reg = <0x0 0xff8b0000 0x0 0x4000>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru HCLK_M_CRYPTO0>, <&cru HCLK_S_CRYPTO0>, <&cru SCLK_CRYPTO0>; - clock-names = "hclk_master", "hclk_slave", "sclk"; - resets = <&cru SRST_CRYPTO0>, <&cru SRST_CRYPTO0_S>, <&cru SRST_CRYPTO0_M>; - reset-names = "master", "slave", "crypto-rst"; - }; - - crypto1: crypto@ff8b8000 { - compatible = "rockchip,rk3399-crypto"; - reg = <0x0 0xff8b8000 0x0 0x4000>; - interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru HCLK_M_CRYPTO1>, <&cru HCLK_S_CRYPTO1>, <&cru SCLK_CRYPTO1>; - clock-names = "hclk_master", "hclk_slave", "sclk"; - resets = <&cru SRST_CRYPTO1>, <&cru SRST_CRYPTO1_S>, <&cru SRST_CRYPTO1_M>; - reset-names = "master", "slave", "crypto-rst"; - }; - - i2c1: i2c@ff110000 { - compatible = "rockchip,rk3399-i2c"; - reg = <0x0 0xff110000 0x0 0x1000>; - assigned-clocks = <&cru SCLK_I2C1>; - assigned-clock-rates = <200000000>; - clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>; - clock-names = "i2c", "pclk"; - interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH 0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_xfer>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c2: i2c@ff120000 { - compatible = "rockchip,rk3399-i2c"; - reg = <0x0 0xff120000 0x0 0x1000>; - assigned-clocks = <&cru SCLK_I2C2>; - assigned-clock-rates = <200000000>; - clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>; - clock-names = "i2c", "pclk"; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH 0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_xfer>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c3: i2c@ff130000 { - compatible = "rockchip,rk3399-i2c"; - reg = <0x0 0xff130000 0x0 0x1000>; - assigned-clocks = <&cru SCLK_I2C3>; - assigned-clock-rates = <200000000>; - clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>; - clock-names = "i2c", "pclk"; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH 0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_xfer>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c5: i2c@ff140000 { - compatible = "rockchip,rk3399-i2c"; - reg = <0x0 0xff140000 0x0 0x1000>; - assigned-clocks = <&cru SCLK_I2C5>; - assigned-clock-rates = <200000000>; - clocks = <&cru SCLK_I2C5>, <&cru PCLK_I2C5>; - clock-names = "i2c", "pclk"; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c5_xfer>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c6: i2c@ff150000 { - compatible = "rockchip,rk3399-i2c"; - reg = <0x0 0xff150000 0x0 0x1000>; - assigned-clocks = <&cru SCLK_I2C6>; - assigned-clock-rates = <200000000>; - clocks = <&cru SCLK_I2C6>, <&cru PCLK_I2C6>; - clock-names = "i2c", "pclk"; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH 0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c6_xfer>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c7: i2c@ff160000 { - compatible = "rockchip,rk3399-i2c"; - reg = <0x0 0xff160000 0x0 0x1000>; - assigned-clocks = <&cru SCLK_I2C7>; - assigned-clock-rates = <200000000>; - clocks = <&cru SCLK_I2C7>, <&cru PCLK_I2C7>; - clock-names = "i2c", "pclk"; - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH 0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c7_xfer>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - uart0: serial@ff180000 { - compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart"; - reg = <0x0 0xff180000 0x0 0x100>; - clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; - clock-names = "baudclk", "apb_pclk"; - interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH 0>; - reg-shift = <2>; - reg-io-width = <4>; - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer>; - status = "disabled"; - }; - - uart1: serial@ff190000 { - compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart"; - reg = <0x0 0xff190000 0x0 0x100>; - clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; - clock-names = "baudclk", "apb_pclk"; - interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH 0>; - reg-shift = <2>; - reg-io-width = <4>; - pinctrl-names = "default"; - pinctrl-0 = <&uart1_xfer>; - status = "disabled"; - }; - - uart2: serial@ff1a0000 { - compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart"; - reg = <0x0 0xff1a0000 0x0 0x100>; - clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; - clock-names = "baudclk", "apb_pclk"; - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH 0>; - reg-shift = <2>; - reg-io-width = <4>; - pinctrl-names = "default"; - pinctrl-0 = <&uart2c_xfer>; - status = "disabled"; - }; - - uart3: serial@ff1b0000 { - compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart"; - reg = <0x0 0xff1b0000 0x0 0x100>; - clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; - clock-names = "baudclk", "apb_pclk"; - interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>; - reg-shift = <2>; - reg-io-width = <4>; - pinctrl-names = "default"; - pinctrl-0 = <&uart3_xfer>; - status = "disabled"; - }; - - spi0: spi@ff1c0000 { - compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi"; - reg = <0x0 0xff1c0000 0x0 0x1000>; - clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; - clock-names = "spiclk", "apb_pclk"; - interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH 0>; - dmas = <&dmac_peri 10>, <&dmac_peri 11>; - dma-names = "tx", "rx"; - pinctrl-names = "default"; - pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi1: spi@ff1d0000 { - compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi"; - reg = <0x0 0xff1d0000 0x0 0x1000>; - clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>; - clock-names = "spiclk", "apb_pclk"; - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH 0>; - dmas = <&dmac_peri 12>, <&dmac_peri 13>; - dma-names = "tx", "rx"; - pinctrl-names = "default"; - pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi2: spi@ff1e0000 { - compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi"; - reg = <0x0 0xff1e0000 0x0 0x1000>; - clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>; - clock-names = "spiclk", "apb_pclk"; - interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH 0>; - dmas = <&dmac_peri 14>, <&dmac_peri 15>; - dma-names = "tx", "rx"; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi4: spi@ff1f0000 { - compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi"; - reg = <0x0 0xff1f0000 0x0 0x1000>; - clocks = <&cru SCLK_SPI4>, <&cru PCLK_SPI4>; - clock-names = "spiclk", "apb_pclk"; - interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH 0>; - dmas = <&dmac_peri 18>, <&dmac_peri 19>; - dma-names = "tx", "rx"; - pinctrl-names = "default"; - pinctrl-0 = <&spi4_clk &spi4_tx &spi4_rx &spi4_cs0>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi5: spi@ff200000 { - compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi"; - reg = <0x0 0xff200000 0x0 0x1000>; - clocks = <&cru SCLK_SPI5>, <&cru PCLK_SPI5>; - clock-names = "spiclk", "apb_pclk"; - interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH 0>; - dmas = <&dmac_bus 8>, <&dmac_bus 9>; - dma-names = "tx", "rx"; - pinctrl-names = "default"; - pinctrl-0 = <&spi5_clk &spi5_tx &spi5_rx &spi5_cs0>; - power-domains = <&power RK3399_PD_SDIOAUDIO>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - thermal_zones: thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <100>; - polling-delay = <1000>; - - thermal-sensors = <&tsadc 0>; - - trips { - cpu_alert0: cpu_alert0 { - temperature = <70000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_alert1: cpu_alert1 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit: cpu_crit { - temperature = <95000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_alert0>; - cooling-device = - <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu_alert1>; - cooling-device = - <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; + opp06 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <1100000 1100000 1250000>; }; - - gpu_thermal: gpu-thermal { - polling-delay-passive = <100>; - polling-delay = <1000>; - - thermal-sensors = <&tsadc 1>; - - trips { - gpu_alert0: gpu_alert0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - gpu_crit: gpu_crit { - temperature = <95000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&gpu_alert0>; - cooling-device = - <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; + opp07 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1200000 1200000 1250000>; }; }; - tsadc: tsadc@ff260000 { - compatible = "rockchip,rk3399-tsadc"; - reg = <0x0 0xff260000 0x0 0x100>; - interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH 0>; - assigned-clocks = <&cru SCLK_TSADC>; - assigned-clock-rates = <750000>; - clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; - clock-names = "tsadc", "apb_pclk"; - resets = <&cru SRST_TSADC>; - reset-names = "tsadc-apb"; - rockchip,grf = <&grf>; - rockchip,hw-tshut-temp = <95000>; - pinctrl-names = "init", "default", "sleep"; - pinctrl-0 = <&otp_pin>; - pinctrl-1 = <&otp_out>; - pinctrl-2 = <&otp_pin>; - #thermal-sensor-cells = <1>; - status = "disabled"; - }; - - qos_emmc: qos@ffa58000 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffa58000 0x0 0x20>; - }; - - qos_gmac: qos@ffa5c000 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffa5c000 0x0 0x20>; - }; - - qos_pcie: qos@ffa60080 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffa60080 0x0 0x20>; - }; + gpu_opp_table: opp-table-2 { + compatible = "operating-points-v2"; - qos_usb_host0: qos@ffa60100 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffa60100 0x0 0x20>; - }; - - qos_usb_host1: qos@ffa60180 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffa60180 0x0 0x20>; - }; - - qos_usb_otg0: qos@ffa70000 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffa70000 0x0 0x20>; - }; - - qos_usb_otg1: qos@ffa70080 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffa70080 0x0 0x20>; - }; - - qos_sd: qos@ffa74000 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffa74000 0x0 0x20>; - }; - - qos_sdioaudio: qos@ffa76000 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffa76000 0x0 0x20>; - }; - - qos_hdcp: qos@ffa90000 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffa90000 0x0 0x20>; - }; - - qos_iep: qos@ffa98000 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffa98000 0x0 0x20>; - }; - - qos_isp0_m0: qos@ffaa0000 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffaa0000 0x0 0x20>; - }; - - qos_isp0_m1: qos@ffaa0080 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffaa0080 0x0 0x20>; - }; - - qos_isp1_m0: qos@ffaa8000 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffaa8000 0x0 0x20>; - }; - - qos_isp1_m1: qos@ffaa8080 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffaa8080 0x0 0x20>; - }; - - qos_rga_r: qos@ffab0000 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffab0000 0x0 0x20>; - }; - - qos_rga_w: qos@ffab0080 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffab0080 0x0 0x20>; - }; - - qos_video_m0: qos@ffab8000 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffab8000 0x0 0x20>; - }; - - qos_video_m1_r: qos@ffac0000 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffac0000 0x0 0x20>; - }; - - qos_video_m1_w: qos@ffac0080 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffac0080 0x0 0x20>; - }; - - qos_vop_big_r: qos@ffac8000 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffac8000 0x0 0x20>; - }; - - qos_vop_big_w: qos@ffac8080 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffac8080 0x0 0x20>; - }; - - qos_vop_little: qos@ffad0000 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffad0000 0x0 0x20>; - }; - - qos_perihp: qos@ffad8080 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffad8080 0x0 0x20>; - }; - - qos_gpu: qos@ffae0000 { - compatible = "rockchip,rk3399-qos", "syscon"; - reg = <0x0 0xffae0000 0x0 0x20>; - }; - - pmu: power-management@ff310000 { - compatible = "rockchip,rk3399-pmu", "syscon", "simple-mfd"; - reg = <0x0 0xff310000 0x0 0x1000>; - - /* - * Note: RK3399 supports 6 voltage domains including VD_CORE_L, - * VD_CORE_B, VD_CENTER, VD_GPU, VD_LOGIC and VD_PMU. - * Some of the power domains are grouped together for every - * voltage domain. - * The detail contents as below. - */ - power: power-controller { - compatible = "rockchip,rk3399-power-controller"; - #power-domain-cells = <1>; - #address-cells = <1>; - #size-cells = <0>; - - /* These power domains are grouped by VD_CENTER */ - power-domain@RK3399_PD_IEP { - reg = <RK3399_PD_IEP>; - clocks = <&cru ACLK_IEP>, - <&cru HCLK_IEP>; - pm_qos = <&qos_iep>; - #power-domain-cells = <0>; - }; - power-domain@RK3399_PD_RGA { - reg = <RK3399_PD_RGA>; - clocks = <&cru ACLK_RGA>, - <&cru HCLK_RGA>; - pm_qos = <&qos_rga_r>, - <&qos_rga_w>; - #power-domain-cells = <0>; - }; - power-domain@RK3399_PD_VCODEC { - reg = <RK3399_PD_VCODEC>; - clocks = <&cru ACLK_VCODEC>, - <&cru HCLK_VCODEC>; - pm_qos = <&qos_video_m0>; - #power-domain-cells = <0>; - }; - power-domain@RK3399_PD_VDU { - reg = <RK3399_PD_VDU>; - clocks = <&cru ACLK_VDU>, - <&cru HCLK_VDU>, - <&cru SCLK_VDU_CA>, - <&cru SCLK_VDU_CORE>; - pm_qos = <&qos_video_m1_r>, - <&qos_video_m1_w>; - #power-domain-cells = <0>; - }; - - /* These power domains are grouped by VD_GPU */ - power-domain@RK3399_PD_GPU { - reg = <RK3399_PD_GPU>; - clocks = <&cru ACLK_GPU>; - pm_qos = <&qos_gpu>; - #power-domain-cells = <0>; - }; - - /* These power domains are grouped by VD_LOGIC */ - power-domain@RK3399_PD_EDP { - reg = <RK3399_PD_EDP>; - clocks = <&cru PCLK_EDP_CTRL>; - #power-domain-cells = <0>; - }; - power-domain@RK3399_PD_EMMC { - reg = <RK3399_PD_EMMC>; - clocks = <&cru ACLK_EMMC>; - pm_qos = <&qos_emmc>; - #power-domain-cells = <0>; - }; - power-domain@RK3399_PD_GMAC { - reg = <RK3399_PD_GMAC>; - clocks = <&cru ACLK_GMAC>, - <&cru PCLK_GMAC>; - pm_qos = <&qos_gmac>; - #power-domain-cells = <0>; - }; - power-domain@RK3399_PD_SD { - reg = <RK3399_PD_SD>; - clocks = <&cru HCLK_SDMMC>, - <&cru SCLK_SDMMC>; - pm_qos = <&qos_sd>; - #power-domain-cells = <0>; - }; - power-domain@RK3399_PD_SDIOAUDIO { - reg = <RK3399_PD_SDIOAUDIO>; - clocks = <&cru HCLK_SDIO>; - pm_qos = <&qos_sdioaudio>; - #power-domain-cells = <0>; - }; - power-domain@RK3399_PD_TCPD0 { - reg = <RK3399_PD_TCPD0>; - clocks = <&cru SCLK_UPHY0_TCPDCORE>, - <&cru SCLK_UPHY0_TCPDPHY_REF>; - #power-domain-cells = <0>; - }; - power-domain@RK3399_PD_TCPD1 { - reg = <RK3399_PD_TCPD1>; - clocks = <&cru SCLK_UPHY1_TCPDCORE>, - <&cru SCLK_UPHY1_TCPDPHY_REF>; - #power-domain-cells = <0>; - }; - power-domain@RK3399_PD_USB3 { - reg = <RK3399_PD_USB3>; - clocks = <&cru ACLK_USB3>; - pm_qos = <&qos_usb_otg0>, - <&qos_usb_otg1>; - #power-domain-cells = <0>; - }; - power-domain@RK3399_PD_VIO { - reg = <RK3399_PD_VIO>; - #power-domain-cells = <1>; - #address-cells = <1>; - #size-cells = <0>; - - power-domain@RK3399_PD_HDCP { - reg = <RK3399_PD_HDCP>; - clocks = <&cru ACLK_HDCP>, - <&cru HCLK_HDCP>, - <&cru PCLK_HDCP>; - pm_qos = <&qos_hdcp>; - #power-domain-cells = <0>; - }; - power-domain@RK3399_PD_ISP0 { - reg = <RK3399_PD_ISP0>; - clocks = <&cru ACLK_ISP0>, - <&cru HCLK_ISP0>; - pm_qos = <&qos_isp0_m0>, - <&qos_isp0_m1>; - #power-domain-cells = <0>; - }; - power-domain@RK3399_PD_ISP1 { - reg = <RK3399_PD_ISP1>; - clocks = <&cru ACLK_ISP1>, - <&cru HCLK_ISP1>; - pm_qos = <&qos_isp1_m0>, - <&qos_isp1_m1>; - #power-domain-cells = <0>; - }; - power-domain@RK3399_PD_VO { - reg = <RK3399_PD_VO>; - #power-domain-cells = <1>; - #address-cells = <1>; - #size-cells = <0>; - - power-domain@RK3399_PD_VOPB { - reg = <RK3399_PD_VOPB>; - clocks = <&cru ACLK_VOP0>, - <&cru HCLK_VOP0>; - pm_qos = <&qos_vop_big_r>, - <&qos_vop_big_w>; - #power-domain-cells = <0>; - }; - power-domain@RK3399_PD_VOPL { - reg = <RK3399_PD_VOPL>; - clocks = <&cru ACLK_VOP1>, - <&cru HCLK_VOP1>; - pm_qos = <&qos_vop_little>; - #power-domain-cells = <0>; - }; - }; - }; + opp00 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <825000 825000 1150000>; }; - }; - - pmugrf: syscon@ff320000 { - compatible = "rockchip,rk3399-pmugrf", "syscon", "simple-mfd"; - reg = <0x0 0xff320000 0x0 0x1000>; - - pmu_io_domains: io-domains { - compatible = "rockchip,rk3399-pmu-io-voltage-domain"; - status = "disabled"; + opp01 { + opp-hz = /bits/ 64 <297000000>; + opp-microvolt = <825000 825000 1150000>; }; - }; - - spi3: spi@ff350000 { - compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi"; - reg = <0x0 0xff350000 0x0 0x1000>; - clocks = <&pmucru SCLK_SPI3_PMU>, <&pmucru PCLK_SPI3_PMU>; - clock-names = "spiclk", "apb_pclk"; - interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH 0>; - pinctrl-names = "default"; - pinctrl-0 = <&spi3_clk &spi3_tx &spi3_rx &spi3_cs0>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - uart4: serial@ff370000 { - compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart"; - reg = <0x0 0xff370000 0x0 0x100>; - clocks = <&pmucru SCLK_UART4_PMU>, <&pmucru PCLK_UART4_PMU>; - clock-names = "baudclk", "apb_pclk"; - interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH 0>; - reg-shift = <2>; - reg-io-width = <4>; - pinctrl-names = "default"; - pinctrl-0 = <&uart4_xfer>; - status = "disabled"; - }; - - i2c0: i2c@ff3c0000 { - compatible = "rockchip,rk3399-i2c"; - reg = <0x0 0xff3c0000 0x0 0x1000>; - assigned-clocks = <&pmucru SCLK_I2C0_PMU>; - assigned-clock-rates = <200000000>; - clocks = <&pmucru SCLK_I2C0_PMU>, <&pmucru PCLK_I2C0_PMU>; - clock-names = "i2c", "pclk"; - interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH 0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_xfer>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c4: i2c@ff3d0000 { - compatible = "rockchip,rk3399-i2c"; - reg = <0x0 0xff3d0000 0x0 0x1000>; - assigned-clocks = <&pmucru SCLK_I2C4_PMU>; - assigned-clock-rates = <200000000>; - clocks = <&pmucru SCLK_I2C4_PMU>, <&pmucru PCLK_I2C4_PMU>; - clock-names = "i2c", "pclk"; - interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH 0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c4_xfer>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c8: i2c@ff3e0000 { - compatible = "rockchip,rk3399-i2c"; - reg = <0x0 0xff3e0000 0x0 0x1000>; - assigned-clocks = <&pmucru SCLK_I2C8_PMU>; - assigned-clock-rates = <200000000>; - clocks = <&pmucru SCLK_I2C8_PMU>, <&pmucru PCLK_I2C8_PMU>; - clock-names = "i2c", "pclk"; - interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c8_xfer>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - pwm0: pwm@ff420000 { - compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm"; - reg = <0x0 0xff420000 0x0 0x10>; - #pwm-cells = <3>; - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pin>; - clocks = <&pmucru PCLK_RKPWM_PMU>; - status = "disabled"; - }; - - pwm1: pwm@ff420010 { - compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm"; - reg = <0x0 0xff420010 0x0 0x10>; - #pwm-cells = <3>; - pinctrl-names = "default"; - pinctrl-0 = <&pwm1_pin>; - clocks = <&pmucru PCLK_RKPWM_PMU>; - status = "disabled"; - }; - - pwm2: pwm@ff420020 { - compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm"; - reg = <0x0 0xff420020 0x0 0x10>; - #pwm-cells = <3>; - pinctrl-names = "default"; - pinctrl-0 = <&pwm2_pin>; - clocks = <&pmucru PCLK_RKPWM_PMU>; - status = "disabled"; - }; - - pwm3: pwm@ff420030 { - compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm"; - reg = <0x0 0xff420030 0x0 0x10>; - #pwm-cells = <3>; - pinctrl-names = "default"; - pinctrl-0 = <&pwm3a_pin>; - clocks = <&pmucru PCLK_RKPWM_PMU>; - status = "disabled"; - }; - - dfi: dfi@ff630000 { - reg = <0x00 0xff630000 0x00 0x4000>; - compatible = "rockchip,rk3399-dfi"; - rockchip,pmu = <&pmugrf>; - interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru PCLK_DDR_MON>; - clock-names = "pclk_ddr_mon"; - }; - - vpu: video-codec@ff650000 { - compatible = "rockchip,rk3399-vpu"; - reg = <0x0 0xff650000 0x0 0x800>; - interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>; - interrupt-names = "vepu", "vdpu"; - clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; - clock-names = "aclk", "hclk"; - iommus = <&vpu_mmu>; - power-domains = <&power RK3399_PD_VCODEC>; - }; - - vpu_mmu: iommu@ff650800 { - compatible = "rockchip,iommu"; - reg = <0x0 0xff650800 0x0 0x40>; - interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; - clock-names = "aclk", "iface"; - #iommu-cells = <0>; - power-domains = <&power RK3399_PD_VCODEC>; - }; - - vdec: video-codec@ff660000 { - compatible = "rockchip,rk3399-vdec"; - reg = <0x0 0xff660000 0x0 0x480>; - interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>, - <&cru SCLK_VDU_CA>, <&cru SCLK_VDU_CORE>; - clock-names = "axi", "ahb", "cabac", "core"; - iommus = <&vdec_mmu>; - power-domains = <&power RK3399_PD_VDU>; - }; - - vdec_mmu: iommu@ff660480 { - compatible = "rockchip,iommu"; - reg = <0x0 0xff660480 0x0 0x40>, <0x0 0xff6604c0 0x0 0x40>; - interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>; - clock-names = "aclk", "iface"; - power-domains = <&power RK3399_PD_VDU>; - #iommu-cells = <0>; - }; - - iep_mmu: iommu@ff670800 { - compatible = "rockchip,iommu"; - reg = <0x0 0xff670800 0x0 0x40>; - interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>; - clock-names = "aclk", "iface"; - #iommu-cells = <0>; - status = "disabled"; - }; - - rga: rga@ff680000 { - compatible = "rockchip,rk3399-rga"; - reg = <0x0 0xff680000 0x0 0x10000>; - interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA_CORE>; - clock-names = "aclk", "hclk", "sclk"; - resets = <&cru SRST_RGA_CORE>, <&cru SRST_A_RGA>, <&cru SRST_H_RGA>; - reset-names = "core", "axi", "ahb"; - power-domains = <&power RK3399_PD_RGA>; - }; - - efuse0: efuse@ff690000 { - compatible = "rockchip,rk3399-efuse"; - reg = <0x0 0xff690000 0x0 0x80>; - #address-cells = <1>; - #size-cells = <1>; - clocks = <&cru PCLK_EFUSE1024NS>; - clock-names = "pclk_efuse"; - - /* Data cells */ - cpu_id: cpu-id@7 { - reg = <0x07 0x10>; - }; - cpub_leakage: cpu-leakage@17 { - reg = <0x17 0x1>; - }; - gpu_leakage: gpu-leakage@18 { - reg = <0x18 0x1>; - }; - center_leakage: center-leakage@19 { - reg = <0x19 0x1>; - }; - cpul_leakage: cpu-leakage@1a { - reg = <0x1a 0x1>; - }; - logic_leakage: logic-leakage@1b { - reg = <0x1b 0x1>; - }; - wafer_info: wafer-info@1c { - reg = <0x1c 0x1>; - }; - }; - - dmac_bus: dma-controller@ff6d0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xff6d0000 0x0 0x4000>; - interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>; - #dma-cells = <1>; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC0_PERILP>; - clock-names = "apb_pclk"; - }; - - dmac_peri: dma-controller@ff6e0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xff6e0000 0x0 0x4000>; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>; - #dma-cells = <1>; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC1_PERILP>; - clock-names = "apb_pclk"; - }; - - pmucru: clock-controller@ff750000 { - compatible = "rockchip,rk3399-pmucru"; - reg = <0x0 0xff750000 0x0 0x1000>; - clocks = <&xin24m>; - clock-names = "xin24m"; - rockchip,grf = <&pmugrf>; - #clock-cells = <1>; - #reset-cells = <1>; - assigned-clocks = <&pmucru PLL_PPLL>; - assigned-clock-rates = <676000000>; - }; - - cru: clock-controller@ff760000 { - compatible = "rockchip,rk3399-cru"; - reg = <0x0 0xff760000 0x0 0x1000>; - clocks = <&xin24m>; - clock-names = "xin24m"; - rockchip,grf = <&grf>; - #clock-cells = <1>; - #reset-cells = <1>; - assigned-clocks = - <&cru PLL_GPLL>, <&cru PLL_CPLL>, - <&cru PLL_NPLL>, - <&cru ACLK_PERIHP>, <&cru HCLK_PERIHP>, - <&cru PCLK_PERIHP>, - <&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>, - <&cru PCLK_PERILP0>, <&cru ACLK_CCI>, - <&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>, - <&cru ACLK_VIO>, <&cru ACLK_HDCP>, - <&cru ACLK_GIC_PRE>, - <&cru PCLK_DDR>, - <&cru ACLK_VDU>; - assigned-clock-rates = - <594000000>, <800000000>, - <1000000000>, - <150000000>, <75000000>, - <37500000>, - <100000000>, <100000000>, - <50000000>, <600000000>, - <100000000>, <50000000>, - <400000000>, <400000000>, - <200000000>, - <200000000>, - <400000000>; - }; - - grf: syscon@ff770000 { - compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd"; - reg = <0x0 0xff770000 0x0 0x10000>; - #address-cells = <1>; - #size-cells = <1>; - - io_domains: io-domains { - compatible = "rockchip,rk3399-io-voltage-domain"; - status = "disabled"; + opp02 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <825000 825000 1150000>; }; - - mipi_dphy_rx0: mipi-dphy-rx0 { - compatible = "rockchip,rk3399-mipi-dphy-rx0"; - clocks = <&cru SCLK_MIPIDPHY_REF>, - <&cru SCLK_DPHY_RX0_CFG>, - <&cru PCLK_VIO_GRF>; - clock-names = "dphy-ref", "dphy-cfg", "grf"; - power-domains = <&power RK3399_PD_VIO>; - #phy-cells = <0>; - status = "disabled"; + opp03 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <875000 875000 1150000>; }; - - u2phy0: usb2phy@e450 { - compatible = "rockchip,rk3399-usb2phy"; - reg = <0xe450 0x10>; - clocks = <&cru SCLK_USB2PHY0_REF>; - clock-names = "phyclk"; - #clock-cells = <0>; - clock-output-names = "clk_usbphy0_480m"; - status = "disabled"; - - u2phy0_host: host-port { - #phy-cells = <0>; - interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>; - interrupt-names = "linestate"; - status = "disabled"; - }; - - u2phy0_otg: otg-port { - #phy-cells = <0>; - interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>; - interrupt-names = "otg-bvalid", "otg-id", - "linestate"; - status = "disabled"; - }; - }; - - u2phy1: usb2phy@e460 { - compatible = "rockchip,rk3399-usb2phy"; - reg = <0xe460 0x10>; - clocks = <&cru SCLK_USB2PHY1_REF>; - clock-names = "phyclk"; - #clock-cells = <0>; - clock-output-names = "clk_usbphy1_480m"; - status = "disabled"; - - u2phy1_host: host-port { - #phy-cells = <0>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>; - interrupt-names = "linestate"; - status = "disabled"; - }; - - u2phy1_otg: otg-port { - #phy-cells = <0>; - interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>; - interrupt-names = "otg-bvalid", "otg-id", - "linestate"; - status = "disabled"; - }; - }; - - emmc_phy: phy@f780 { - compatible = "rockchip,rk3399-emmc-phy"; - reg = <0xf780 0x24>; - clocks = <&sdhci>; - clock-names = "emmcclk"; - drive-impedance-ohm = <50>; - #phy-cells = <0>; - status = "disabled"; + opp04 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <925000 925000 1150000>; }; - - pcie_phy: pcie-phy { - compatible = "rockchip,rk3399-pcie-phy"; - clocks = <&cru SCLK_PCIEPHY_REF>; - clock-names = "refclk"; - #phy-cells = <1>; - resets = <&cru SRST_PCIEPHY>; - reset-names = "phy"; - status = "disabled"; + opp05 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1100000 1100000 1150000>; }; }; +}; - tcphy0: phy@ff7c0000 { - compatible = "rockchip,rk3399-typec-phy"; - reg = <0x0 0xff7c0000 0x0 0x40000>; - clocks = <&cru SCLK_UPHY0_TCPDCORE>, - <&cru SCLK_UPHY0_TCPDPHY_REF>; - clock-names = "tcpdcore", "tcpdphy-ref"; - assigned-clocks = <&cru SCLK_UPHY0_TCPDCORE>; - assigned-clock-rates = <50000000>; - power-domains = <&power RK3399_PD_TCPD0>; - resets = <&cru SRST_UPHY0>, - <&cru SRST_UPHY0_PIPE_L00>, - <&cru SRST_P_UPHY0_TCPHY>; - reset-names = "uphy", "uphy-pipe", "uphy-tcphy"; - rockchip,grf = <&grf>; - status = "disabled"; - - tcphy0_dp: dp-port { - #phy-cells = <0>; - }; - - tcphy0_usb3: usb3-port { - #phy-cells = <0>; - }; - }; - - tcphy1: phy@ff800000 { - compatible = "rockchip,rk3399-typec-phy"; - reg = <0x0 0xff800000 0x0 0x40000>; - clocks = <&cru SCLK_UPHY1_TCPDCORE>, - <&cru SCLK_UPHY1_TCPDPHY_REF>; - clock-names = "tcpdcore", "tcpdphy-ref"; - assigned-clocks = <&cru SCLK_UPHY1_TCPDCORE>; - assigned-clock-rates = <50000000>; - power-domains = <&power RK3399_PD_TCPD1>; - resets = <&cru SRST_UPHY1>, - <&cru SRST_UPHY1_PIPE_L00>, - <&cru SRST_P_UPHY1_TCPHY>; - reset-names = "uphy", "uphy-pipe", "uphy-tcphy"; - rockchip,grf = <&grf>; - status = "disabled"; - - tcphy1_dp: dp-port { - #phy-cells = <0>; - }; - - tcphy1_usb3: usb3-port { - #phy-cells = <0>; - }; - }; - - watchdog@ff848000 { - compatible = "rockchip,rk3399-wdt", "snps,dw-wdt"; - reg = <0x0 0xff848000 0x0 0x100>; - clocks = <&cru PCLK_WDT>; - interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH 0>; - }; - - rktimer: rktimer@ff850000 { - compatible = "rockchip,rk3399-timer"; - reg = <0x0 0xff850000 0x0 0x1000>; - interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru PCLK_TIMER0>, <&cru SCLK_TIMER00>; - clock-names = "pclk", "timer"; - }; - - spdif: spdif@ff870000 { - compatible = "rockchip,rk3399-spdif"; - reg = <0x0 0xff870000 0x0 0x1000>; - interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH 0>; - dmas = <&dmac_bus 7>; - dma-names = "tx"; - clock-names = "mclk", "hclk"; - clocks = <&cru SCLK_SPDIF_8CH>, <&cru HCLK_SPDIF>; - pinctrl-names = "default"; - pinctrl-0 = <&spdif_bus>; - power-domains = <&power RK3399_PD_SDIOAUDIO>; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - i2s0: i2s@ff880000 { - compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s"; - reg = <0x0 0xff880000 0x0 0x1000>; - rockchip,grf = <&grf>; - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH 0>; - dmas = <&dmac_bus 0>, <&dmac_bus 1>; - dma-names = "tx", "rx"; - clock-names = "i2s_clk", "i2s_hclk"; - clocks = <&cru SCLK_I2S0_8CH>, <&cru HCLK_I2S0_8CH>; - pinctrl-names = "bclk_on", "bclk_off"; - pinctrl-0 = <&i2s0_8ch_bus>; - pinctrl-1 = <&i2s0_8ch_bus_bclk_off>; - power-domains = <&power RK3399_PD_SDIOAUDIO>; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - i2s1: i2s@ff890000 { - compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s"; - reg = <0x0 0xff890000 0x0 0x1000>; - interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH 0>; - dmas = <&dmac_bus 2>, <&dmac_bus 3>; - dma-names = "tx", "rx"; - clock-names = "i2s_clk", "i2s_hclk"; - clocks = <&cru SCLK_I2S1_8CH>, <&cru HCLK_I2S1_8CH>; - pinctrl-names = "default"; - pinctrl-0 = <&i2s1_2ch_bus>; - power-domains = <&power RK3399_PD_SDIOAUDIO>; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - i2s2: i2s@ff8a0000 { - compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s"; - reg = <0x0 0xff8a0000 0x0 0x1000>; - interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH 0>; - dmas = <&dmac_bus 4>, <&dmac_bus 5>; - dma-names = "tx", "rx"; - clock-names = "i2s_clk", "i2s_hclk"; - clocks = <&cru SCLK_I2S2_8CH>, <&cru HCLK_I2S2_8CH>; - power-domains = <&power RK3399_PD_SDIOAUDIO>; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - vopl: vop@ff8f0000 { - compatible = "rockchip,rk3399-vop-lit"; - reg = <0x0 0xff8f0000 0x0 0x2000>, <0x0 0xff8f2000 0x0 0x400>; - interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>; - assigned-clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>; - assigned-clock-rates = <400000000>, <100000000>; - clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>; - clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; - iommus = <&vopl_mmu>; - power-domains = <&power RK3399_PD_VOPL>; - resets = <&cru SRST_A_VOP1>, <&cru SRST_H_VOP1>, <&cru SRST_D_VOP1>; - reset-names = "axi", "ahb", "dclk"; - status = "disabled"; - - vopl_out: port { - #address-cells = <1>; - #size-cells = <0>; - - vopl_out_mipi: endpoint@0 { - reg = <0>; - remote-endpoint = <&mipi_in_vopl>; - }; - - vopl_out_edp: endpoint@1 { - reg = <1>; - remote-endpoint = <&edp_in_vopl>; - }; - - vopl_out_hdmi: endpoint@2 { - reg = <2>; - remote-endpoint = <&hdmi_in_vopl>; - }; - - vopl_out_mipi1: endpoint@3 { - reg = <3>; - remote-endpoint = <&mipi1_in_vopl>; - }; - - vopl_out_dp: endpoint@4 { - reg = <4>; - remote-endpoint = <&dp_in_vopl>; - }; - }; - }; - - vopl_mmu: iommu@ff8f3f00 { - compatible = "rockchip,iommu"; - reg = <0x0 0xff8f3f00 0x0 0x100>; - interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>; - clock-names = "aclk", "iface"; - power-domains = <&power RK3399_PD_VOPL>; - #iommu-cells = <0>; - status = "disabled"; - }; - - vopb: vop@ff900000 { - compatible = "rockchip,rk3399-vop-big"; - reg = <0x0 0xff900000 0x0 0x2000>, <0x0 0xff902000 0x0 0x1000>; - interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>; - assigned-clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>; - assigned-clock-rates = <400000000>, <100000000>; - clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>; - clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; - iommus = <&vopb_mmu>; - power-domains = <&power RK3399_PD_VOPB>; - resets = <&cru SRST_A_VOP0>, <&cru SRST_H_VOP0>, <&cru SRST_D_VOP0>; - reset-names = "axi", "ahb", "dclk"; - status = "disabled"; - - vopb_out: port { - #address-cells = <1>; - #size-cells = <0>; - - vopb_out_edp: endpoint@0 { - reg = <0>; - remote-endpoint = <&edp_in_vopb>; - }; - - vopb_out_mipi: endpoint@1 { - reg = <1>; - remote-endpoint = <&mipi_in_vopb>; - }; - - vopb_out_hdmi: endpoint@2 { - reg = <2>; - remote-endpoint = <&hdmi_in_vopb>; - }; - - vopb_out_mipi1: endpoint@3 { - reg = <3>; - remote-endpoint = <&mipi1_in_vopb>; - }; - - vopb_out_dp: endpoint@4 { - reg = <4>; - remote-endpoint = <&dp_in_vopb>; - }; - }; - }; - - vopb_mmu: iommu@ff903f00 { - compatible = "rockchip,iommu"; - reg = <0x0 0xff903f00 0x0 0x100>; - interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>; - clock-names = "aclk", "iface"; - power-domains = <&power RK3399_PD_VOPB>; - #iommu-cells = <0>; - status = "disabled"; - }; - - isp0: isp0@ff910000 { - compatible = "rockchip,rk3399-cif-isp"; - reg = <0x0 0xff910000 0x0 0x4000>; - interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru SCLK_ISP0>, - <&cru ACLK_ISP0_WRAPPER>, - <&cru HCLK_ISP0_WRAPPER>; - clock-names = "isp", "aclk", "hclk"; - iommus = <&isp0_mmu>; - phys = <&mipi_dphy_rx0>; - phy-names = "dphy"; - power-domains = <&power RK3399_PD_ISP0>; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - }; - }; - }; - - isp0_mmu: iommu@ff914000 { - compatible = "rockchip,iommu"; - reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>; - interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru ACLK_ISP0_WRAPPER>, <&cru HCLK_ISP0_WRAPPER>; - clock-names = "aclk", "iface"; - #iommu-cells = <0>; - power-domains = <&power RK3399_PD_ISP0>; - rockchip,disable-mmu-reset; - }; - - isp1: isp1@ff920000 { - compatible = "rockchip,rk3399-cif-isp"; - reg = <0x0 0xff920000 0x0 0x4000>; - interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru SCLK_ISP1>, - <&cru ACLK_ISP1_WRAPPER>, - <&cru HCLK_ISP1_WRAPPER>; - clock-names = "isp", "aclk", "hclk"; - iommus = <&isp1_mmu>; - phys = <&mipi_dsi1>; - phy-names = "dphy"; - power-domains = <&power RK3399_PD_ISP1>; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - }; - }; - }; - - isp1_mmu: iommu@ff924000 { - compatible = "rockchip,iommu"; - reg = <0x0 0xff924000 0x0 0x100>, <0x0 0xff925000 0x0 0x100>; - interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru ACLK_ISP1_WRAPPER>, <&cru HCLK_ISP1_WRAPPER>; - clock-names = "aclk", "iface"; - #iommu-cells = <0>; - power-domains = <&power RK3399_PD_ISP1>; - rockchip,disable-mmu-reset; - }; - - hdmi_sound: hdmi-sound { - compatible = "simple-audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,mclk-fs = <256>; - simple-audio-card,name = "hdmi-sound"; - status = "disabled"; - - simple-audio-card,cpu { - sound-dai = <&i2s2>; - }; - simple-audio-card,codec { - sound-dai = <&hdmi>; - }; - }; - - hdmi: hdmi@ff940000 { - compatible = "rockchip,rk3399-dw-hdmi"; - reg = <0x0 0xff940000 0x0 0x20000>; - reg-io-width = <4>; - interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru PCLK_HDMI_CTRL>, - <&cru SCLK_HDMI_SFR>, - <&cru SCLK_HDMI_CEC>, - <&cru PCLK_VIO_GRF>, - <&cru PLL_VPLL>; - clock-names = "iahb", "isfr", "cec", "grf", "ref"; - power-domains = <&power RK3399_PD_HDCP>; - rockchip,grf = <&grf>; - #sound-dai-cells = <0>; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - hdmi_in: port@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - hdmi_in_vopb: endpoint@0 { - reg = <0>; - remote-endpoint = <&vopb_out_hdmi>; - }; - hdmi_in_vopl: endpoint@1 { - reg = <1>; - remote-endpoint = <&vopl_out_hdmi>; - }; - }; - - hdmi_out: port@1 { - reg = <1>; - }; - }; - }; - - mipi_dsi: dsi@ff960000 { - compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi"; - reg = <0x0 0xff960000 0x0 0x8000>; - interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru SCLK_DPHY_PLL>, <&cru PCLK_MIPI_DSI0>, - <&cru SCLK_DPHY_TX0_CFG>, <&cru PCLK_VIO_GRF>; - clock-names = "ref", "pclk", "phy_cfg", "grf"; - power-domains = <&power RK3399_PD_VIO>; - resets = <&cru SRST_P_MIPI_DSI0>; - reset-names = "apb"; - rockchip,grf = <&grf>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - mipi_in: port@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - mipi_in_vopb: endpoint@0 { - reg = <0>; - remote-endpoint = <&vopb_out_mipi>; - }; - - mipi_in_vopl: endpoint@1 { - reg = <1>; - remote-endpoint = <&vopl_out_mipi>; - }; - }; - - mipi_out: port@1 { - reg = <1>; - }; - }; - }; - - mipi_dsi1: dsi@ff968000 { - compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi"; - reg = <0x0 0xff968000 0x0 0x8000>; - interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru SCLK_DPHY_PLL>, <&cru PCLK_MIPI_DSI1>, - <&cru SCLK_DPHY_TX1RX1_CFG>, <&cru PCLK_VIO_GRF>; - clock-names = "ref", "pclk", "phy_cfg", "grf"; - power-domains = <&power RK3399_PD_VIO>; - resets = <&cru SRST_P_MIPI_DSI1>; - reset-names = "apb"; - rockchip,grf = <&grf>; - #address-cells = <1>; - #size-cells = <0>; - #phy-cells = <0>; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - mipi1_in: port@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - mipi1_in_vopb: endpoint@0 { - reg = <0>; - remote-endpoint = <&vopb_out_mipi1>; - }; - - mipi1_in_vopl: endpoint@1 { - reg = <1>; - remote-endpoint = <&vopl_out_mipi1>; - }; - }; - - mipi1_out: port@1 { - reg = <1>; - }; - }; - }; - - edp: dp@ff970000 { - compatible = "rockchip,rk3399-edp"; - reg = <0x0 0xff970000 0x0 0x8000>; - interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru PCLK_EDP>, <&cru PCLK_EDP_CTRL>, <&cru PCLK_VIO_GRF>; - clock-names = "dp", "pclk", "grf"; - pinctrl-names = "default"; - pinctrl-0 = <&edp_hpd>; - power-domains = <&power RK3399_PD_EDP>; - resets = <&cru SRST_P_EDP_CTRL>; - reset-names = "dp"; - rockchip,grf = <&grf>; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - edp_in: port@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - edp_in_vopb: endpoint@0 { - reg = <0>; - remote-endpoint = <&vopb_out_edp>; - }; - - edp_in_vopl: endpoint@1 { - reg = <1>; - remote-endpoint = <&vopl_out_edp>; - }; - }; - - edp_out: port@1 { - reg = <1>; - }; - }; - }; - - gpu: gpu@ff9a0000 { - compatible = "rockchip,rk3399-mali", "arm,mali-t860"; - reg = <0x0 0xff9a0000 0x0 0x10000>; - interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>; - interrupt-names = "job", "mmu", "gpu"; - clocks = <&cru ACLK_GPU>; - #cooling-cells = <2>; - dynamic-power-coefficient = <2640>; - power-domains = <&power RK3399_PD_GPU>; - status = "disabled"; - }; - - pinctrl: pinctrl { - compatible = "rockchip,rk3399-pinctrl"; - rockchip,grf = <&grf>; - rockchip,pmu = <&pmugrf>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - gpio0: gpio@ff720000 { - compatible = "rockchip,gpio-bank"; - reg = <0x0 0xff720000 0x0 0x100>; - clocks = <&pmucru PCLK_GPIO0_PMU>; - interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>; - - gpio-controller; - #gpio-cells = <0x2>; - - interrupt-controller; - #interrupt-cells = <0x2>; - }; - - gpio1: gpio@ff730000 { - compatible = "rockchip,gpio-bank"; - reg = <0x0 0xff730000 0x0 0x100>; - clocks = <&pmucru PCLK_GPIO1_PMU>; - interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH 0>; - - gpio-controller; - #gpio-cells = <0x2>; - - interrupt-controller; - #interrupt-cells = <0x2>; - }; - - gpio2: gpio@ff780000 { - compatible = "rockchip,gpio-bank"; - reg = <0x0 0xff780000 0x0 0x100>; - clocks = <&cru PCLK_GPIO2>; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH 0>; - - gpio-controller; - #gpio-cells = <0x2>; - - interrupt-controller; - #interrupt-cells = <0x2>; - }; - - gpio3: gpio@ff788000 { - compatible = "rockchip,gpio-bank"; - reg = <0x0 0xff788000 0x0 0x100>; - clocks = <&cru PCLK_GPIO3>; - interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>; - - gpio-controller; - #gpio-cells = <0x2>; - - interrupt-controller; - #interrupt-cells = <0x2>; - }; - - gpio4: gpio@ff790000 { - compatible = "rockchip,gpio-bank"; - reg = <0x0 0xff790000 0x0 0x100>; - clocks = <&cru PCLK_GPIO4>; - interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>; - - gpio-controller; - #gpio-cells = <0x2>; - - interrupt-controller; - #interrupt-cells = <0x2>; - }; - - pcfg_pull_up: pcfg-pull-up { - bias-pull-up; - }; - - pcfg_pull_down: pcfg-pull-down { - bias-pull-down; - }; - - pcfg_pull_none: pcfg-pull-none { - bias-disable; - }; - - pcfg_pull_none_12ma: pcfg-pull-none-12ma { - bias-disable; - drive-strength = <12>; - }; - - pcfg_pull_none_13ma: pcfg-pull-none-13ma { - bias-disable; - drive-strength = <13>; - }; - - pcfg_pull_none_18ma: pcfg-pull-none-18ma { - bias-disable; - drive-strength = <18>; - }; - - pcfg_pull_none_20ma: pcfg-pull-none-20ma { - bias-disable; - drive-strength = <20>; - }; - - pcfg_pull_up_2ma: pcfg-pull-up-2ma { - bias-pull-up; - drive-strength = <2>; - }; - - pcfg_pull_up_8ma: pcfg-pull-up-8ma { - bias-pull-up; - drive-strength = <8>; - }; - - pcfg_pull_up_18ma: pcfg-pull-up-18ma { - bias-pull-up; - drive-strength = <18>; - }; - - pcfg_pull_up_20ma: pcfg-pull-up-20ma { - bias-pull-up; - drive-strength = <20>; - }; - - pcfg_pull_down_4ma: pcfg-pull-down-4ma { - bias-pull-down; - drive-strength = <4>; - }; - - pcfg_pull_down_8ma: pcfg-pull-down-8ma { - bias-pull-down; - drive-strength = <8>; - }; - - pcfg_pull_down_12ma: pcfg-pull-down-12ma { - bias-pull-down; - drive-strength = <12>; - }; - - pcfg_pull_down_18ma: pcfg-pull-down-18ma { - bias-pull-down; - drive-strength = <18>; - }; - - pcfg_pull_down_20ma: pcfg-pull-down-20ma { - bias-pull-down; - drive-strength = <20>; - }; - - pcfg_output_high: pcfg-output-high { - output-high; - }; - - pcfg_output_low: pcfg-output-low { - output-low; - }; - - pcfg_input_enable: pcfg-input-enable { - input-enable; - }; - - pcfg_input_pull_up: pcfg-input-pull-up { - input-enable; - bias-pull-up; - }; - - pcfg_input_pull_down: pcfg-input-pull-down { - input-enable; - bias-pull-down; - }; - - clock { - clk_32k: clk-32k { - rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>; - }; - }; - - cif { - cif_clkin: cif-clkin { - rockchip,pins = - <2 RK_PB2 3 &pcfg_pull_none>; - }; - - cif_clkouta: cif-clkouta { - rockchip,pins = - <2 RK_PB3 3 &pcfg_pull_none>; - }; - }; - - edp { - edp_hpd: edp-hpd { - rockchip,pins = - <4 RK_PC7 2 &pcfg_pull_none>; - }; - }; - - gmac { - rgmii_pins: rgmii-pins { - rockchip,pins = - /* mac_txclk */ - <3 RK_PC1 1 &pcfg_pull_none_13ma>, - /* mac_rxclk */ - <3 RK_PB6 1 &pcfg_pull_none>, - /* mac_mdio */ - <3 RK_PB5 1 &pcfg_pull_none>, - /* mac_txen */ - <3 RK_PB4 1 &pcfg_pull_none_13ma>, - /* mac_clk */ - <3 RK_PB3 1 &pcfg_pull_none>, - /* mac_rxdv */ - <3 RK_PB1 1 &pcfg_pull_none>, - /* mac_mdc */ - <3 RK_PB0 1 &pcfg_pull_none>, - /* mac_rxd1 */ - <3 RK_PA7 1 &pcfg_pull_none>, - /* mac_rxd0 */ - <3 RK_PA6 1 &pcfg_pull_none>, - /* mac_txd1 */ - <3 RK_PA5 1 &pcfg_pull_none_13ma>, - /* mac_txd0 */ - <3 RK_PA4 1 &pcfg_pull_none_13ma>, - /* mac_rxd3 */ - <3 RK_PA3 1 &pcfg_pull_none>, - /* mac_rxd2 */ - <3 RK_PA2 1 &pcfg_pull_none>, - /* mac_txd3 */ - <3 RK_PA1 1 &pcfg_pull_none_13ma>, - /* mac_txd2 */ - <3 RK_PA0 1 &pcfg_pull_none_13ma>; - }; - - rmii_pins: rmii-pins { - rockchip,pins = - /* mac_mdio */ - <3 RK_PB5 1 &pcfg_pull_none>, - /* mac_txen */ - <3 RK_PB4 1 &pcfg_pull_none_13ma>, - /* mac_clk */ - <3 RK_PB3 1 &pcfg_pull_none>, - /* mac_rxer */ - <3 RK_PB2 1 &pcfg_pull_none>, - /* mac_rxdv */ - <3 RK_PB1 1 &pcfg_pull_none>, - /* mac_mdc */ - <3 RK_PB0 1 &pcfg_pull_none>, - /* mac_rxd1 */ - <3 RK_PA7 1 &pcfg_pull_none>, - /* mac_rxd0 */ - <3 RK_PA6 1 &pcfg_pull_none>, - /* mac_txd1 */ - <3 RK_PA5 1 &pcfg_pull_none_13ma>, - /* mac_txd0 */ - <3 RK_PA4 1 &pcfg_pull_none_13ma>; - }; - }; - - i2c0 { - i2c0_xfer: i2c0-xfer { - rockchip,pins = - <1 RK_PB7 2 &pcfg_pull_none>, - <1 RK_PC0 2 &pcfg_pull_none>; - }; - }; - - i2c1 { - i2c1_xfer: i2c1-xfer { - rockchip,pins = - <4 RK_PA2 1 &pcfg_pull_none>, - <4 RK_PA1 1 &pcfg_pull_none>; - }; - }; - - i2c2 { - i2c2_xfer: i2c2-xfer { - rockchip,pins = - <2 RK_PA1 2 &pcfg_pull_none_12ma>, - <2 RK_PA0 2 &pcfg_pull_none_12ma>; - }; - }; - - i2c3 { - i2c3_xfer: i2c3-xfer { - rockchip,pins = - <4 RK_PC1 1 &pcfg_pull_none>, - <4 RK_PC0 1 &pcfg_pull_none>; - }; - }; - - i2c4 { - i2c4_xfer: i2c4-xfer { - rockchip,pins = - <1 RK_PB4 1 &pcfg_pull_none>, - <1 RK_PB3 1 &pcfg_pull_none>; - }; - }; - - i2c5 { - i2c5_xfer: i2c5-xfer { - rockchip,pins = - <3 RK_PB3 2 &pcfg_pull_none>, - <3 RK_PB2 2 &pcfg_pull_none>; - }; - }; - - i2c6 { - i2c6_xfer: i2c6-xfer { - rockchip,pins = - <2 RK_PB2 2 &pcfg_pull_none>, - <2 RK_PB1 2 &pcfg_pull_none>; - }; - }; - - i2c7 { - i2c7_xfer: i2c7-xfer { - rockchip,pins = - <2 RK_PB0 2 &pcfg_pull_none>, - <2 RK_PA7 2 &pcfg_pull_none>; - }; - }; - - i2c8 { - i2c8_xfer: i2c8-xfer { - rockchip,pins = - <1 RK_PC5 1 &pcfg_pull_none>, - <1 RK_PC4 1 &pcfg_pull_none>; - }; - }; - - i2s0 { - i2s0_2ch_bus: i2s0-2ch-bus { - rockchip,pins = - <3 RK_PD0 1 &pcfg_pull_none>, - <3 RK_PD1 1 &pcfg_pull_none>, - <3 RK_PD2 1 &pcfg_pull_none>, - <3 RK_PD3 1 &pcfg_pull_none>, - <3 RK_PD7 1 &pcfg_pull_none>, - <4 RK_PA0 1 &pcfg_pull_none>; - }; - - i2s0_2ch_bus_bclk_off: i2s0-2ch-bus-bclk-off { - rockchip,pins = - <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>, - <3 RK_PD1 1 &pcfg_pull_none>, - <3 RK_PD2 1 &pcfg_pull_none>, - <3 RK_PD3 1 &pcfg_pull_none>, - <3 RK_PD7 1 &pcfg_pull_none>, - <4 RK_PA0 1 &pcfg_pull_none>; - }; - - i2s0_8ch_bus: i2s0-8ch-bus { - rockchip,pins = - <3 RK_PD0 1 &pcfg_pull_none>, - <3 RK_PD1 1 &pcfg_pull_none>, - <3 RK_PD2 1 &pcfg_pull_none>, - <3 RK_PD3 1 &pcfg_pull_none>, - <3 RK_PD4 1 &pcfg_pull_none>, - <3 RK_PD5 1 &pcfg_pull_none>, - <3 RK_PD6 1 &pcfg_pull_none>, - <3 RK_PD7 1 &pcfg_pull_none>, - <4 RK_PA0 1 &pcfg_pull_none>; - }; - - i2s0_8ch_bus_bclk_off: i2s0-8ch-bus-bclk-off { - rockchip,pins = - <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>, - <3 RK_PD1 1 &pcfg_pull_none>, - <3 RK_PD2 1 &pcfg_pull_none>, - <3 RK_PD3 1 &pcfg_pull_none>, - <3 RK_PD4 1 &pcfg_pull_none>, - <3 RK_PD5 1 &pcfg_pull_none>, - <3 RK_PD6 1 &pcfg_pull_none>, - <3 RK_PD7 1 &pcfg_pull_none>, - <4 RK_PA0 1 &pcfg_pull_none>; - }; - }; - - i2s1 { - i2s1_2ch_bus: i2s1-2ch-bus { - rockchip,pins = - <4 RK_PA3 1 &pcfg_pull_none>, - <4 RK_PA4 1 &pcfg_pull_none>, - <4 RK_PA5 1 &pcfg_pull_none>, - <4 RK_PA6 1 &pcfg_pull_none>, - <4 RK_PA7 1 &pcfg_pull_none>; - }; - - i2s1_2ch_bus_bclk_off: i2s1-2ch-bus-bclk-off { - rockchip,pins = - <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>, - <4 RK_PA4 1 &pcfg_pull_none>, - <4 RK_PA5 1 &pcfg_pull_none>, - <4 RK_PA6 1 &pcfg_pull_none>, - <4 RK_PA7 1 &pcfg_pull_none>; - }; - }; - - sdio0 { - sdio0_bus1: sdio0-bus1 { - rockchip,pins = - <2 RK_PC4 1 &pcfg_pull_up>; - }; - - sdio0_bus4: sdio0-bus4 { - rockchip,pins = - <2 RK_PC4 1 &pcfg_pull_up>, - <2 RK_PC5 1 &pcfg_pull_up>, - <2 RK_PC6 1 &pcfg_pull_up>, - <2 RK_PC7 1 &pcfg_pull_up>; - }; - - sdio0_cmd: sdio0-cmd { - rockchip,pins = - <2 RK_PD0 1 &pcfg_pull_up>; - }; - - sdio0_clk: sdio0-clk { - rockchip,pins = - <2 RK_PD1 1 &pcfg_pull_none>; - }; - - sdio0_cd: sdio0-cd { - rockchip,pins = - <2 RK_PD2 1 &pcfg_pull_up>; - }; - - sdio0_pwr: sdio0-pwr { - rockchip,pins = - <2 RK_PD3 1 &pcfg_pull_up>; - }; - - sdio0_bkpwr: sdio0-bkpwr { - rockchip,pins = - <2 RK_PD4 1 &pcfg_pull_up>; - }; - - sdio0_wp: sdio0-wp { - rockchip,pins = - <0 RK_PA3 1 &pcfg_pull_up>; - }; - - sdio0_int: sdio0-int { - rockchip,pins = - <0 RK_PA4 1 &pcfg_pull_up>; - }; - }; - - sdmmc { - sdmmc_bus1: sdmmc-bus1 { - rockchip,pins = - <4 RK_PB0 1 &pcfg_pull_up>; - }; - - sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = - <4 RK_PB0 1 &pcfg_pull_up>, - <4 RK_PB1 1 &pcfg_pull_up>, - <4 RK_PB2 1 &pcfg_pull_up>, - <4 RK_PB3 1 &pcfg_pull_up>; - }; - - sdmmc_clk: sdmmc-clk { - rockchip,pins = - <4 RK_PB4 1 &pcfg_pull_none>; - }; - - sdmmc_cmd: sdmmc-cmd { - rockchip,pins = - <4 RK_PB5 1 &pcfg_pull_up>; - }; - - sdmmc_cd: sdmmc-cd { - rockchip,pins = - <0 RK_PA7 1 &pcfg_pull_up>; - }; - - sdmmc_wp: sdmmc-wp { - rockchip,pins = - <0 RK_PB0 1 &pcfg_pull_up>; - }; - }; - - suspend { - ap_pwroff: ap-pwroff { - rockchip,pins = <1 RK_PA5 1 &pcfg_pull_none>; - }; - - ddrio_pwroff: ddrio-pwroff { - rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>; - }; - }; - - spdif { - spdif_bus: spdif-bus { - rockchip,pins = - <4 RK_PC5 1 &pcfg_pull_none>; - }; - - spdif_bus_1: spdif-bus-1 { - rockchip,pins = - <3 RK_PC0 3 &pcfg_pull_none>; - }; - }; - - spi0 { - spi0_clk: spi0-clk { - rockchip,pins = - <3 RK_PA6 2 &pcfg_pull_up>; - }; - spi0_cs0: spi0-cs0 { - rockchip,pins = - <3 RK_PA7 2 &pcfg_pull_up>; - }; - spi0_cs1: spi0-cs1 { - rockchip,pins = - <3 RK_PB0 2 &pcfg_pull_up>; - }; - spi0_tx: spi0-tx { - rockchip,pins = - <3 RK_PA5 2 &pcfg_pull_up>; - }; - spi0_rx: spi0-rx { - rockchip,pins = - <3 RK_PA4 2 &pcfg_pull_up>; - }; - }; - - spi1 { - spi1_clk: spi1-clk { - rockchip,pins = - <1 RK_PB1 2 &pcfg_pull_up>; - }; - spi1_cs0: spi1-cs0 { - rockchip,pins = - <1 RK_PB2 2 &pcfg_pull_up>; - }; - spi1_rx: spi1-rx { - rockchip,pins = - <1 RK_PA7 2 &pcfg_pull_up>; - }; - spi1_tx: spi1-tx { - rockchip,pins = - <1 RK_PB0 2 &pcfg_pull_up>; - }; - }; - - spi2 { - spi2_clk: spi2-clk { - rockchip,pins = - <2 RK_PB3 1 &pcfg_pull_up>; - }; - spi2_cs0: spi2-cs0 { - rockchip,pins = - <2 RK_PB4 1 &pcfg_pull_up>; - }; - spi2_rx: spi2-rx { - rockchip,pins = - <2 RK_PB1 1 &pcfg_pull_up>; - }; - spi2_tx: spi2-tx { - rockchip,pins = - <2 RK_PB2 1 &pcfg_pull_up>; - }; - }; - - spi3 { - spi3_clk: spi3-clk { - rockchip,pins = - <1 RK_PC1 1 &pcfg_pull_up>; - }; - spi3_cs0: spi3-cs0 { - rockchip,pins = - <1 RK_PC2 1 &pcfg_pull_up>; - }; - spi3_rx: spi3-rx { - rockchip,pins = - <1 RK_PB7 1 &pcfg_pull_up>; - }; - spi3_tx: spi3-tx { - rockchip,pins = - <1 RK_PC0 1 &pcfg_pull_up>; - }; - }; - - spi4 { - spi4_clk: spi4-clk { - rockchip,pins = - <3 RK_PA2 2 &pcfg_pull_up>; - }; - spi4_cs0: spi4-cs0 { - rockchip,pins = - <3 RK_PA3 2 &pcfg_pull_up>; - }; - spi4_rx: spi4-rx { - rockchip,pins = - <3 RK_PA0 2 &pcfg_pull_up>; - }; - spi4_tx: spi4-tx { - rockchip,pins = - <3 RK_PA1 2 &pcfg_pull_up>; - }; - }; - - spi5 { - spi5_clk: spi5-clk { - rockchip,pins = - <2 RK_PC6 2 &pcfg_pull_up>; - }; - spi5_cs0: spi5-cs0 { - rockchip,pins = - <2 RK_PC7 2 &pcfg_pull_up>; - }; - spi5_rx: spi5-rx { - rockchip,pins = - <2 RK_PC4 2 &pcfg_pull_up>; - }; - spi5_tx: spi5-tx { - rockchip,pins = - <2 RK_PC5 2 &pcfg_pull_up>; - }; - }; - - testclk { - test_clkout0: test-clkout0 { - rockchip,pins = - <0 RK_PA0 1 &pcfg_pull_none>; - }; - - test_clkout1: test-clkout1 { - rockchip,pins = - <2 RK_PD1 2 &pcfg_pull_none>; - }; - - test_clkout2: test-clkout2 { - rockchip,pins = - <0 RK_PB0 3 &pcfg_pull_none>; - }; - }; - - tsadc { - otp_pin: otp-pin { - rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - otp_out: otp-out { - rockchip,pins = <1 RK_PA6 1 &pcfg_pull_none>; - }; - }; - - uart0 { - uart0_xfer: uart0-xfer { - rockchip,pins = - <2 RK_PC0 1 &pcfg_pull_up>, - <2 RK_PC1 1 &pcfg_pull_none>; - }; - - uart0_cts: uart0-cts { - rockchip,pins = - <2 RK_PC2 1 &pcfg_pull_none>; - }; - - uart0_rts: uart0-rts { - rockchip,pins = - <2 RK_PC3 1 &pcfg_pull_none>; - }; - }; - - uart1 { - uart1_xfer: uart1-xfer { - rockchip,pins = - <3 RK_PB4 2 &pcfg_pull_up>, - <3 RK_PB5 2 &pcfg_pull_none>; - }; - }; - - uart2a { - uart2a_xfer: uart2a-xfer { - rockchip,pins = - <4 RK_PB0 2 &pcfg_pull_up>, - <4 RK_PB1 2 &pcfg_pull_none>; - }; - }; - - uart2b { - uart2b_xfer: uart2b-xfer { - rockchip,pins = - <4 RK_PC0 2 &pcfg_pull_up>, - <4 RK_PC1 2 &pcfg_pull_none>; - }; - }; - - uart2c { - uart2c_xfer: uart2c-xfer { - rockchip,pins = - <4 RK_PC3 1 &pcfg_pull_up>, - <4 RK_PC4 1 &pcfg_pull_none>; - }; - }; - - uart3 { - uart3_xfer: uart3-xfer { - rockchip,pins = - <3 RK_PB6 2 &pcfg_pull_up>, - <3 RK_PB7 2 &pcfg_pull_none>; - }; - - uart3_cts: uart3-cts { - rockchip,pins = - <3 RK_PC0 2 &pcfg_pull_none>; - }; - - uart3_rts: uart3-rts { - rockchip,pins = - <3 RK_PC1 2 &pcfg_pull_none>; - }; - }; - - uart4 { - uart4_xfer: uart4-xfer { - rockchip,pins = - <1 RK_PA7 1 &pcfg_pull_up>, - <1 RK_PB0 1 &pcfg_pull_none>; - }; - }; - - uarthdcp { - uarthdcp_xfer: uarthdcp-xfer { - rockchip,pins = - <4 RK_PC5 2 &pcfg_pull_up>, - <4 RK_PC6 2 &pcfg_pull_none>; - }; - }; - - pwm0 { - pwm0_pin: pwm0-pin { - rockchip,pins = - <4 RK_PC2 1 &pcfg_pull_none>; - }; - - pwm0_pin_pull_down: pwm0-pin-pull-down { - rockchip,pins = - <4 RK_PC2 1 &pcfg_pull_down>; - }; - - vop0_pwm_pin: vop0-pwm-pin { - rockchip,pins = - <4 RK_PC2 2 &pcfg_pull_none>; - }; - - vop1_pwm_pin: vop1-pwm-pin { - rockchip,pins = - <4 RK_PC2 3 &pcfg_pull_none>; - }; - }; - - pwm1 { - pwm1_pin: pwm1-pin { - rockchip,pins = - <4 RK_PC6 1 &pcfg_pull_none>; - }; - - pwm1_pin_pull_down: pwm1-pin-pull-down { - rockchip,pins = - <4 RK_PC6 1 &pcfg_pull_down>; - }; - }; - - pwm2 { - pwm2_pin: pwm2-pin { - rockchip,pins = - <1 RK_PC3 1 &pcfg_pull_none>; - }; - - pwm2_pin_pull_down: pwm2-pin-pull-down { - rockchip,pins = - <1 RK_PC3 1 &pcfg_pull_down>; - }; - }; - - pwm3a { - pwm3a_pin: pwm3a-pin { - rockchip,pins = - <0 RK_PA6 1 &pcfg_pull_none>; - }; - }; +&cpu_l0 { + operating-points-v2 = <&cluster0_opp>; +}; - pwm3b { - pwm3b_pin: pwm3b-pin { - rockchip,pins = - <1 RK_PB6 1 &pcfg_pull_none>; - }; - }; +&cpu_l1 { + operating-points-v2 = <&cluster0_opp>; +}; - hdmi { - hdmi_i2c_xfer: hdmi-i2c-xfer { - rockchip,pins = - <4 RK_PC1 3 &pcfg_pull_none>, - <4 RK_PC0 3 &pcfg_pull_none>; - }; +&cpu_l2 { + operating-points-v2 = <&cluster0_opp>; +}; - hdmi_cec: hdmi-cec { - rockchip,pins = - <4 RK_PC7 1 &pcfg_pull_none>; - }; - }; +&cpu_l3 { + operating-points-v2 = <&cluster0_opp>; +}; - pcie { - pcie_clkreqn_cpm: pci-clkreqn-cpm { - rockchip,pins = - <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; - }; +&cpu_b0 { + operating-points-v2 = <&cluster1_opp>; +}; - pcie_clkreqnb_cpm: pci-clkreqnb-cpm { - rockchip,pins = - <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; +&cpu_b1 { + operating-points-v2 = <&cluster1_opp>; +}; - }; +&gpu { + operating-points-v2 = <&gpu_opp_table>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts b/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts index c58fb7658d7a..d3c628218ce3 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts @@ -7,7 +7,6 @@ /dts-v1/; #include "rk3399.dtsi" -#include "rk3399-opp.dtsi" #include <arm/rockchip/rockchip-radxa-dalang-carrier.dtsi> #include "rk3399pro-vmarc-som.dtsi" diff --git a/arch/arm64/boot/dts/rockchip/rk3566-lckfb-tspi.dts b/arch/arm64/boot/dts/rockchip/rk3566-lckfb-tspi.dts new file mode 100644 index 000000000000..7cd91f8000cb --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-lckfb-tspi.dts @@ -0,0 +1,725 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include <dt-bindings/soc/rockchip,boot-mode.h> +#include "rk3566.dtsi" + +/ { + model = "LCKFB Taishan Pi RK3566"; + compatible = "lckfb,tspi-rk3566", "rockchip,rk3566"; + + aliases { + mmc0 = &sdmmc0; + mmc1 = &sdhci; + mmc2 = &sdmmc1; + }; + + chosen: chosen { + stdout-path = "serial2:1500000n8"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ramoops: ramoops@110000 { + compatible = "ramoops"; + reg = <0 0x110000 0 0xf0000>; + console-size = <0x80000>; + ftrace-size = <0x00000>; + pmsg-size = <0x50000>; + record-size = <0x20000>; + }; + }; + + adc_keys: adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-recovery { + label = "recovery"; + linux,code = <KEY_RESTART>; + press-threshold-microvolt = <108>; + }; + }; + + hdmi_con: hdmi-con { + compatible = "hdmi-connector"; + type = "d"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + leds: leds { + compatible = "gpio-leds"; + + rgb_led_r: rgb-led-r { + color = <LED_COLOR_ID_RED>; + gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_LOW>; + label = "status-red"; + }; + + rgb_led_g: rgb-led-g { + gpios = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_GREEN>; + label = "status-green"; + }; + + rgb_led_b: rgb-led-b { + gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_BLUE>; + label = "status-blue"; + }; + }; + + multi_leds: multi-led { + compatible = "leds-group-multicolor"; + color = <LED_COLOR_ID_RGB>; + label = "status-rgb"; + function = LED_FUNCTION_INDICATOR; + leds = <&rgb_led_r>, <&rgb_led_g>, <&rgb_led_b>; + }; + + vcc12v0_dcin: regulator-12v0-dcin { + compatible = "regulator-fixed"; + regulator-name = "vcc12v0_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc3v3_sys: regulator-3v3-vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_sys: regulator-5v0-vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v0_dcin>; + }; + + vcc5v0_host: regulator-5v0-vcc-host { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + regulator-name = "vcc5v0_host"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk809 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + post-power-on-delay-ms = <200>; + reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,name = "Analog RK809"; + simple-audio-card,mclk-fs = <256>; + + simple-audio-card,cpu { + sound-dai = <&i2s1_8ch>; + }; + + simple-audio-card,codec { + sound-dai = <&rk809>; + }; + }; +}; + +&combphy1 { + status = "okay"; +}; + +&combphy2 { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + avdd-0v9-supply = <&vdda0v9_image>; + avdd-1v8-supply = <&vcca1v8_image>; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + assigned-clocks = <&cru I2S1_MCLKOUT_TX>; + assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; + #clock-cells = <1>; + clock-output-names = "rk808-clkout1", "rk808-clkout2"; + clock-names = "mclk"; + clocks = <&cru I2S1_MCLKOUT_TX>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>; + rockchip,system-power-controller; + #sound-dai-cells = <0>; + wakeup-source; + + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_npu: DCDC_REG4 { + regulator-name = "vdd_npu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_image: LDO_REG1 { + regulator-name = "vdda0v9_image"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-name = "vdda_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-name = "vdda0v9_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-name = "vccio_acodec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-name = "vcc3v3_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_1v8: LDO_REG7 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pmu: LDO_REG8 { + regulator-name = "vcca1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_image: LDO_REG9 { + regulator-name = "vcca1v8_image"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG5 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-name = "vcc3v3_sd"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + + codec { + rockchip,mic-in-differential; + }; + }; +}; + +&i2c1 { + status = "okay"; + /* Touch Screen */ +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4m0_xfer>; + status = "okay"; + /* Camera */ +}; + +&i2s0_8ch { + status = "okay"; + /* HDMI */ +}; + +&i2s1_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>; + rockchip,trcm-sync-tx-only; + status = "okay"; + /* PMIC */ +}; + +&i2s2_2ch { + rockchip,trcm-sync-tx-only; + status = "okay"; + /* AP6212 Bluetooth */ +}; + +&pinctrl { + bt { + bt_enable_h: bt-enable-h { + rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hp-detect { + hp_det: hp-det { + rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + pmic { + pmic_int: pmic-int { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wifi_host_wake_h: wifi-host-wake-l { + rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb2 { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc3v3_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio2-supply = <&vcc_1v8>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_1v8>; + vccio7-supply = <&vcc_3v3>; + status = "okay"; +}; + +&pmugrf { + reboot-mode { + compatible = "syscon-reboot-mode"; + offset = <0x200>; + mode-normal = <BOOT_NORMAL>; + mode-loader = <BOOT_BL_DOWNLOAD>; + mode-recovery = <BOOT_RECOVERY>; + mode-bootloader = <BOOT_FASTBOOT>; + }; +}; + +&saradc { + vref-supply = <&vcca_1v8>; + status = "okay"; + /* Channel 0: Recovery Button */ + /* Channel 1: Hardware ID */ +}; + +&sdhci { + bus-width = <8>; + max-frequency = <200000000>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe &emmc_rstnout>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc0 { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_sd>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc1 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + disable-wp; + keep-power-in-suspend; + max-frequency = <150000000>; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_sys>; + vqmmc-supply = <&vcc_1v8>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio2>; + interrupts = <RK_PB2 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_h>; + }; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; + uart-has-rtscts; + status = "okay"; + + bluetooth: bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk809 1>; + clock-names = "lpo"; + max-speed = <3000000>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; + vbat-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_xhci { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_xhci { + dr_mode = "host"; + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_host { + phy-supply = <&vcc5v0_sys>; + status = "okay"; +}; + +&usb2phy0_otg { + phy-supply = <&vcc5v0_sys>; + status = "okay"; +}; + +&usb2phy1 { + status = "okay"; +}; + +&usb2phy1_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&usb2phy1_otg { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-odroid-m1s.dts b/arch/arm64/boot/dts/rockchip/rk3566-odroid-m1s.dts new file mode 100644 index 000000000000..33bc5249d729 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-odroid-m1s.dts @@ -0,0 +1,663 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include "rk3566.dtsi" + +/ { + model = "Hardkernel ODROID-M1S"; + compatible = "hardkernel,odroid-m1s", "rockchip,rk3566"; + + aliases { + ethernet0 = &gmac1; + mmc0 = &sdhci; + mmc1 = &sdmmc0; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_led>, <&sys_led>; + + led_pwr: led-0 { + color = <LED_COLOR_ID_RED>; + default-state = "on"; + function = LED_FUNCTION_POWER; + gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led_sys: led-1 { + color = <LED_COLOR_ID_BLUE>; + default-state = "on"; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + vcc3v3_lcd: regulator-3v3-vcc-lcd { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pwren>; + regulator-name = "vcc3v3_lcd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc3v3_sys>; + }; + + vcc3v3_pcie: regulator-3v3-vcc-pcie { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pwren>; + regulator-name = "vcc3v3_pcie"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc3v3_sys>; + }; + + vcc3v3_sys: regulator-3v3-vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_sys: regulator-5v0-vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc5v0_usb2_host: regulator-5v0-vcc-usb2-host { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb2_host_pwren>; + regulator-name = "vcc5v0_usb2_host"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_usb2_otg: regulator-5v0-vcc-usb2-otg { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb2_otg_pwren>; + regulator-name = "vcc5v0_usb2_otg"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_usb3_host: regulator-5v0-vcc-usb3-host { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_host_pwren>; + regulator-name = "vcc5v0_usb3_host"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,name = "Analog RK809"; + simple-audio-card,mclk-fs = <256>; + + simple-audio-card,cpu { + sound-dai = <&i2s1_8ch>; + }; + + simple-audio-card,codec { + sound-dai = <&rk809>; + }; + }; +}; + +&combphy1 { + status = "okay"; +}; + +&combphy2 { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&gmac1 { + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>; + clock_in_out = "input"; + phy-handle = <&rgmii_phy1>; + phy-mode = "rgmii-id"; + phy-supply = <&vcc_3v3>; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1m1_miim + &gmac1m1_tx_bus2 + &gmac1m1_rx_bus2 + &gmac1m1_rgmii_clk + &gmac1m1_rgmii_bus + &gmac1m1_clkinout>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + avdd-0v9-supply = <&vdda0v9_image>; + avdd-1v8-supply = <&vcca1v8_image>; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1390000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + assigned-clocks = <&cru I2S1_MCLKOUT_TX>; + assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; + #clock-cells = <1>; + clocks = <&cru I2S1_MCLKOUT_TX>; + clock-names = "mclk"; + clock-output-names = "rk809-clkout1", "rk809-clkout2"; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>; + #sound-dai-cells = <0>; + system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_npu: DCDC_REG4 { + regulator-name = "vdd_npu"; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG5 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_image: LDO_REG1 { + regulator-name = "vdda0v9_image"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-name = "vdda_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-name = "vdda0v9_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-name = "vccio_acodec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-name = "vcc3v3_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_1v8: LDO_REG7 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pmu: LDO_REG8 { + regulator-name = "vcca1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_image: LDO_REG9 { + regulator-name = "vcca1v8_image"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-name = "vcc3v3_sd"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&i2s0_8ch { + status = "okay"; +}; + +&i2s1_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m0_sclktx + &i2s1m0_lrcktx + &i2s1m0_sdi0 + &i2s1m0_sdo0>; + rockchip,trcm-sync-tx-only; + status = "okay"; +}; + +&mdio1 { + rgmii_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + }; +}; + +&pcie2x1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie20_pins>; + reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&pinctrl { + lcd { + lcd_pwren: lcd-pwren { + rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + pwr_led: pwr-led { + rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + sys_led: sys-led { + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie { + pcie20_pins: pcie20-pins { + rockchip,pins = + <1 RK_PB0 4 &pcfg_pull_none>, + <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>, + <1 RK_PB1 4 &pcfg_pull_none>; + }; + + pcie_pwren: pcie-pwren { + rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int: pmic-int { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb { + usb2_host_pwren: usb2-host-pwren { + rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usb2_otg_pwren: usb2-otg-pwren { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usb3_host_pwren: usb3-host-pwren { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc3v3_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio2-supply = <&vcc_1v8>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_3v3>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_3v3>; + vccio7-supply = <&vcc_3v3>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca_1v8>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + cap-mmc-highspeed; + max-frequency = <200000000>; + mmc-hs200-1_8v; + no-sd; + no-sdio; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe &emmc_rstnout>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc0 { + bus-width = <4>; + cap-sd-highspeed; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + sd-uhs-sdr50; + vmmc-supply = <&vcc3v3_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host0_xhci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host1_xhci { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_host { + phy-supply = <&vcc5v0_usb3_host>; + status = "okay"; +}; + +&usb2phy0_otg { + phy-supply = <&vcc5v0_usb2_otg>; + status = "okay"; +}; + +&usb2phy1 { + status = "okay"; +}; + +&usb2phy1_host { + phy-supply = <&vcc5v0_usb2_host>; + status = "okay"; +}; + +&usb2phy1_otg { + phy-supply = <&vcc5v0_usb2_host>; + status = "okay"; +}; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts index 13e599a85eb8..c164074ddf54 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts @@ -648,6 +648,8 @@ }; &tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <0>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3.dtsi index 9cc7aa3298d0..de390d92c35e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3.dtsi @@ -493,7 +493,6 @@ }; &usb_host0_xhci { - dr_mode = "peripheral"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts index b5e67990dd0f..8e5c182ef76c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts @@ -20,9 +20,9 @@ cap-mmc-highspeed; cap-sd-highspeed; disable-wp; - max-frequency = <150000000>; no-sdio; no-mmc; + sd-uhs-sdr50; pinctrl-names = "default"; pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; vmmc-supply = <&vcc3v3_sd>; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts index ce2a5e1ccefc..d27eb37b5b35 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts @@ -39,12 +39,6 @@ &gmac0_rx_bus2 &gmac0_rgmii_clk &gmac0_rgmii_bus>; - snps,reset-gpio = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - /* Reset time is 15ms, 50ms for rtl8211f */ - snps,reset-delays-us = <0 15000 50000>; - tx_delay = <0x3c>; - rx_delay = <0x2f>; status = "okay"; }; @@ -61,12 +55,6 @@ &gmac1m1_rx_bus2 &gmac1m1_rgmii_clk &gmac1m1_rgmii_bus>; - snps,reset-gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - /* Reset time is 15ms, 50ms for rtl8211f */ - snps,reset-delays-us = <0 15000 50000>; - tx_delay = <0x4f>; - rx_delay = <0x26>; status = "okay"; }; @@ -76,6 +64,9 @@ reg = <0x1>; pinctrl-0 = <ð_phy0_reset_pin>; pinctrl-names = "default"; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>; }; }; @@ -85,6 +76,9 @@ reg = <0x1>; pinctrl-0 = <ð_phy1_reset_pin>; pinctrl-names = "default"; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-mecsbc.dts b/arch/arm64/boot/dts/rockchip/rk3568-mecsbc.dts index c2dfffc638d1..c491dc4d4947 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-mecsbc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-mecsbc.dts @@ -89,6 +89,20 @@ }; }; +&can0 { + compatible = "rockchip,rk3568v3-canfd", "rockchip,rk3568v2-canfd"; + pinctrl-names = "default"; + pinctrl-0 = <&can0m0_pins>; + status = "okay"; +}; + +&can1 { + compatible = "rockchip,rk3568v3-canfd", "rockchip,rk3568v2-canfd"; + pinctrl-names = "default"; + pinctrl-0 = <&can1m1_pins>; + status = "okay"; +}; + &combphy0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts index a337f547caf5..6a02db4f073f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts @@ -13,7 +13,7 @@ / { model = "Hardkernel ODROID-M1"; - compatible = "rockchip,rk3568-odroid-m1", "rockchip,rk3568"; + compatible = "hardkernel,odroid-m1", "rockchip,rk3568"; aliases { ethernet0 = &gmac0; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts index 6a998166003c..e601d9271ba8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts @@ -6,12 +6,190 @@ /dts-v1/; +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/gpio/gpio.h> #include "rk3568.dtsi" / { model = "Qnap TS-433-4G NAS System 4-Bay"; compatible = "qnap,ts433", "rockchip,rk3568"; + + aliases { + ethernet0 = &gmac0; + mmc0 = &sdhci; + rtc0 = &rtc_rv8263; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + keys { + compatible = "gpio-keys"; + pinctrl-0 = <©_button_pin>, <&reset_button_pin>; + pinctrl-names = "default"; + + key-copy { + label = "copy"; + gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_COPY>; + }; + + key-reset { + label = "reset"; + gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DISK; + gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>; + linux,default-trigger = "disk-activity"; + pinctrl-names = "default"; + pinctrl-0 = <&hdd1_led_pin>; + }; + + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DISK; + gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>; + linux,default-trigger = "disk-activity"; + pinctrl-names = "default"; + pinctrl-0 = <&hdd2_led_pin>; + }; + + led-2 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DISK; + gpios = <&gpio1 RK_PD7 GPIO_ACTIVE_LOW>; + linux,default-trigger = "disk-activity"; + pinctrl-names = "default"; + pinctrl-0 = <&hdd3_led_pin>; + }; + + led-3 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DISK; + gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "disk-activity"; + pinctrl-names = "default"; + pinctrl-0 = <&hdd4_led_pin>; + }; + }; + + dc_12v: regulator-dc-12v { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc3v3_pcie: regulator-vcc3v3-pcie { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pcie"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; + vin-supply = <&dc_12v>; + }; + + vcc3v3_sys: regulator-vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_12v>; + }; + + vcc5v0_host: regulator-vcc5v0-host { + compatible = "regulator-fixed"; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + regulator-name = "vcc5v0_host"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; + + vcc5v0_otg: regulator-vcc5v0-otg { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_otg_en>; + regulator-name = "vcc5v0_otg"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; + + vcc5v0_sys: regulator-vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + vcc5v0_usb: regulator-vcc5v0-usb { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; +}; + +/* connected to usb_host0_xhci */ +&combphy0 { + status = "okay"; +}; + +/* connected to sata1 */ +&combphy1 { + status = "okay"; +}; + +/* connected to sata2 */ +&combphy2 { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; }; &gmac0 { @@ -20,35 +198,282 @@ assigned-clock-rates = <0>, <125000000>; clock_in_out = "output"; phy-handle = <&rgmii_phy0>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; pinctrl-names = "default"; pinctrl-0 = <&gmac0_miim &gmac0_tx_bus2 &gmac0_rx_bus2 &gmac0_rgmii_clk &gmac0_rgmii_bus>; - rx_delay = <0x2f>; - tx_delay = <0x3c>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; status = "okay"; }; &i2c0 { + status = "okay"; + pmic@20 { compatible = "rockchip,rk809"; reg = <0x20>; interrupt-parent = <&gpio0>; - interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + system-power-controller; + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + wakeup-source; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-always-on; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_npu: DCDC_REG4 { + regulator-name = "vdd_npu"; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG5 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_image: LDO_REG1 { + regulator-name = "vdda0v9_image"; + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-name = "vdda_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-name = "vdda0v9_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-name = "vccio_acodec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-name = "vcc3v3_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_1v8: LDO_REG7 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pmu: LDO_REG8 { + regulator-name = "vcca1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_image: LDO_REG9 { + regulator-name = "vcca1v8_image"; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-name = "vcc3v3_sd"; + /* + * turning this off, breaks access to both + * PCIe controllers, refclk generator perhaps + */ + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_cpu: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1390000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; }; }; &i2c1 { status = "okay"; - rtc@51 { + rtc_rv8263: rtc@51 { compatible = "microcrystal,rv8263"; reg = <0x51>; wakeup-source; }; + + /* eeprom for vital-product-data on the mainboard */ + eeprom@54 { + compatible = "giantec,gt24c04a", "atmel,24c04"; + reg = <0x54>; + label = "VPD_MB"; + num-addresses = <2>; + pagesize = <16>; + read-only; + }; + + /* eeprom for vital-product-data on the backplane */ + eeprom@56 { + compatible = "giantec,gt24c04a", "atmel,24c04"; + reg = <0x56>; + label = "VPD_BP"; + num-addresses = <2>; + pagesize = <16>; + read-only; + }; }; &mdio0 { @@ -59,12 +484,82 @@ }; &pcie30phy { + data-lanes = <1 2>; status = "okay"; }; +/* Connected to a JMicron AHCI SATA controller */ &pcie3x1 { - /* The downstream dts has: rockchip,bifurcation, XXX: find out what this is about */ reset-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +/* Connected to the 2.5G NIC for the upper network jack */ +&pcie3x2 { + num-lanes = <1>; + reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&pinctrl { + keys { + copy_button_pin: copy-button-pin { + rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + reset_button_pin: reset-button-pin { + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + hdd1_led_pin: hdd1-led-pin { + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + hdd2_led_pin: hdd2-led-pin { + rockchip,pins = <1 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + hdd3_led_pin: hdd3-led-pin { + rockchip,pins = <1 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + hdd4_led_pin: hdd4_led-pin { + rockchip,pins = <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc5v0_otg_en: vcc5v0-otg-en { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + vccio4-supply = <&vcc_1v8>; + vccio6-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&sata2 { status = "okay"; }; @@ -75,6 +570,20 @@ status = "okay"; }; +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +/* + * Connected to an MCU, that provides access to more LEDs, + * buzzer, fan control and more. + */ +&uart0 { + status = "okay"; +}; + /* * Pins available on CN3 connector at TTL voltage level (3V3). * ,_ _. @@ -84,3 +593,53 @@ &uart2 { status = "okay"; }; + +&usb2phy0 { + status = "okay"; +}; + +/* connected to usb_host0_xhci */ +&usb2phy0_otg { + phy-supply = <&vcc5v0_otg>; + status = "okay"; +}; + +&usb2phy1 { + status = "okay"; +}; + +/* connected to usb_host1_ehci/ohci */ +&usb2phy1_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +/* connected to usb_host0_ehci/ohci */ +&usb2phy1_otg { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +/* right port backside */ +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +/* front port */ +&usb_host0_xhci { + dr_mode = "host"; + status = "okay"; +}; + +/* left port backside */ +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi index 45b03dcbbad4..19d309654bdb 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi @@ -108,10 +108,6 @@ cpu-supply = <&vdd_cpu>; }; -&display_subsystem { - status = "disabled"; -}; - &gpu { mali-supply = <&vdd_gpu>; status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts index 72ad74c38a2b..84a0789fad96 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts @@ -103,6 +103,10 @@ phy-supply = <&vcc3v3_pcie30x1>; }; +&display_subsystem { + status = "disabled"; +}; + &pcie2x1 { pinctrl-names = "default"; pinctrl-0 = <&pcie20_reset_h>; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-wolfvision-pf5-display-vz.dtso b/arch/arm64/boot/dts/rockchip/rk3568-wolfvision-pf5-display-vz.dtso new file mode 100644 index 000000000000..70c23e1bf14b --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3568-wolfvision-pf5-display-vz.dtso @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Device tree overlay for the WolfVision PF5 Visualizer display. + * + * Copyright (C) 2024 WolfVision GmbH. + */ + +/dts-v1/; +/plugin/; + +#include "rk3568-wolfvision-pf5-display.dtsi" + +&st7789 { + compatible = "jasonic,jt240mhqs-hwt-ek-e3", + "sitronix,st7789v"; + rotation = <270>; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-wolfvision-pf5-display.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-wolfvision-pf5-display.dtsi new file mode 100644 index 000000000000..b22bb543ecbb --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3568-wolfvision-pf5-display.dtsi @@ -0,0 +1,121 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Device tree overlay base for the WolfVision PF5 displays. + * + * Copyright (C) 2024 WolfVision GmbH. + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/clock/rk3568-cru.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> + +&{/} { + display_backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = <0 255>; + default-brightness-level = <255>; + num-interpolated-steps = <255>; + power-supply = <&vcc3v3_sd>; + pwms = <&pwm10 0 1000000 0>; + }; + + display_spi: spi { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + cs-gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>; + miso-gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_spi>; + sck-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>; + + st7789: panel@0 { + compatible = "sitronix,st7789v"; + reg = <0>; + assigned-clocks = <&cru PLL_VPLL>; + assigned-clock-rates = <700000000>; + backlight = <&display_backlight>; + pinctrl-names = "default"; + pinctrl-0 = <&lcdc_clock &lcdc_data18 &lcd_rstn>; + power-supply = <&vcc3v3_sw>; + reset-gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_LOW>; + spi-max-frequency = <100000>; + + port { + panel_in_vp2: endpoint { + remote-endpoint = <&vp2_out_rgb>; + }; + }; + }; + }; +}; + +&i2c1 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + st1624: touchscreen@55 { + compatible = "sitronix,st1624", "sitronix,st1633"; + reg = <0x55>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB5 IRQ_TYPE_EDGE_FALLING>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&touch_int &touch_rstn>; + wakeup-source; + }; +}; + +&pinctrl { + display: display-pinctrl { + lcd_rstn: lcd-rstn-pinctrl { + rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + lcd_spi: lcd-spi-pinctrl { + rockchip,pins = + /* lcd_sdo */ + <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>, + /* lcd_csn */ + <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>, + /* lcd_scl */ + <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>, + /* lcd_sdi */ + <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + touchscreen: touchscreen-pinctrl { + touch_int: touch-int-pinctrl { + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + touch_rstn: touch-rstn-pinctrl { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm10 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm10m1_pins>; + status = "okay"; +}; + +&vp2 { + #address-cells = <1>; + #size-cells = <0>; + + vp2_out_rgb: endpoint@ROCKCHIP_VOP2_EP_RGB0 { + reg = <ROCKCHIP_VOP2_EP_RGB0>; + remote-endpoint = <&panel_in_vp2>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi index f1be76a54ceb..0946310e8c12 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi @@ -213,6 +213,45 @@ }; }; + can0: can@fe570000 { + compatible = "rockchip,rk3568v2-canfd"; + reg = <0x0 0xfe570000 0x0 0x1000>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru CLK_CAN0>, <&cru PCLK_CAN0>; + clock-names = "baud", "pclk"; + resets = <&cru SRST_CAN0>, <&cru SRST_P_CAN0>; + reset-names = "core", "apb"; + pinctrl-names = "default"; + pinctrl-0 = <&can0m0_pins>; + status = "disabled"; + }; + + can1: can@fe580000 { + compatible = "rockchip,rk3568v2-canfd"; + reg = <0x0 0xfe580000 0x0 0x1000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru CLK_CAN1>, <&cru PCLK_CAN1>; + clock-names = "baud", "pclk"; + resets = <&cru SRST_CAN1>, <&cru SRST_P_CAN1>; + reset-names = "core", "apb"; + pinctrl-names = "default"; + pinctrl-0 = <&can1m0_pins>; + status = "disabled"; + }; + + can2: can@fe590000 { + compatible = "rockchip,rk3568v2-canfd"; + reg = <0x0 0xfe590000 0x0 0x1000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru CLK_CAN2>, <&cru PCLK_CAN2>; + clock-names = "baud", "pclk"; + resets = <&cru SRST_CAN2>, <&cru SRST_P_CAN2>; + reset-names = "core", "apb"; + pinctrl-names = "default"; + pinctrl-0 = <&can2m0_pins>; + status = "disabled"; + }; + combphy0: phy@fe820000 { compatible = "rockchip,rk3568-naneng-combphy"; reg = <0x0 0xfe820000 0x0 0x100>; @@ -257,6 +296,10 @@ }; }; +&rng { + status = "okay"; +}; + &usb_host0_xhci { phys = <&usb2phy0_otg>, <&combphy0 PHY_TYPE_USB3>; phy-names = "usb2-phy", "usb3-phy"; diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi index c72b3a608edd..0ee0ada6f0ab 100644 --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi @@ -1113,6 +1113,15 @@ status = "disabled"; }; + rng: rng@fe388000 { + compatible = "rockchip,rk3568-rng"; + reg = <0x0 0xfe388000 0x0 0x4000>; + clocks = <&cru CLK_TRNG_NS>, <&cru HCLK_TRNG_NS>; + clock-names = "core", "ahb"; + resets = <&cru SRST_TRNG_NS>; + status = "disabled"; + }; + i2s0_8ch: i2s@fe400000 { compatible = "rockchip,rk3568-i2s-tdm"; reg = <0x0 0xfe400000 0x0 0x1000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi index 30db12c4fc82..d1368418502a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi @@ -2449,15 +2449,15 @@ /* sdio_clk_m1 */ <3 RK_PA5 2 &pcfg_pull_none>, /* sdio_cmd_m1 */ - <3 RK_PA4 2 &pcfg_pull_none>, + <3 RK_PA4 2 &pcfg_pull_up>, /* sdio_d0_m1 */ - <3 RK_PA0 2 &pcfg_pull_none>, + <3 RK_PA0 2 &pcfg_pull_up>, /* sdio_d1_m1 */ - <3 RK_PA1 2 &pcfg_pull_none>, + <3 RK_PA1 2 &pcfg_pull_up>, /* sdio_d2_m1 */ - <3 RK_PA2 2 &pcfg_pull_none>, + <3 RK_PA2 2 &pcfg_pull_up>, /* sdio_d3_m1 */ - <3 RK_PA3 2 &pcfg_pull_none>; + <3 RK_PA3 2 &pcfg_pull_up>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi index ee99166ebd46..d97d84b88837 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi @@ -1122,6 +1122,118 @@ }; }; + vpu121: video-codec@fdb50000 { + compatible = "rockchip,rk3588-vpu121", "rockchip,rk3568-vpu"; + reg = <0x0 0xfdb50000 0x0 0x800>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "vdpu"; + clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>; + clock-names = "aclk", "hclk"; + iommus = <&vpu121_mmu>; + power-domains = <&power RK3588_PD_VDPU>; + }; + + vpu121_mmu: iommu@fdb50800 { + compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu"; + reg = <0x0 0xfdb50800 0x0 0x40>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>; + clock-names = "aclk", "iface"; + clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>; + power-domains = <&power RK3588_PD_VDPU>; + #iommu-cells = <0>; + }; + + rga: rga@fdb80000 { + compatible = "rockchip,rk3588-rga", "rockchip,rk3288-rga"; + reg = <0x0 0xfdb80000 0x0 0x180>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_RGA2>, <&cru HCLK_RGA2>, <&cru CLK_RGA2_CORE>; + clock-names = "aclk", "hclk", "sclk"; + resets = <&cru SRST_RGA2_CORE>, <&cru SRST_A_RGA2>, <&cru SRST_H_RGA2>; + reset-names = "core", "axi", "ahb"; + power-domains = <&power RK3588_PD_VDPU>; + }; + + vepu121_0: video-codec@fdba0000 { + compatible = "rockchip,rk3588-vepu121"; + reg = <0x0 0xfdba0000 0x0 0x800>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_JPEG_ENCODER0>, <&cru HCLK_JPEG_ENCODER0>; + clock-names = "aclk", "hclk"; + iommus = <&vepu121_0_mmu>; + power-domains = <&power RK3588_PD_VDPU>; + }; + + vepu121_0_mmu: iommu@fdba0800 { + compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu"; + reg = <0x0 0xfdba0800 0x0 0x40>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_JPEG_ENCODER0>, <&cru HCLK_JPEG_ENCODER0>; + clock-names = "aclk", "iface"; + power-domains = <&power RK3588_PD_VDPU>; + #iommu-cells = <0>; + }; + + vepu121_1: video-codec@fdba4000 { + compatible = "rockchip,rk3588-vepu121"; + reg = <0x0 0xfdba4000 0x0 0x800>; + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_JPEG_ENCODER1>, <&cru HCLK_JPEG_ENCODER1>; + clock-names = "aclk", "hclk"; + iommus = <&vepu121_1_mmu>; + power-domains = <&power RK3588_PD_VDPU>; + }; + + vepu121_1_mmu: iommu@fdba4800 { + compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu"; + reg = <0x0 0xfdba4800 0x0 0x40>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_JPEG_ENCODER1>, <&cru HCLK_JPEG_ENCODER1>; + clock-names = "aclk", "iface"; + power-domains = <&power RK3588_PD_VDPU>; + #iommu-cells = <0>; + }; + + vepu121_2: video-codec@fdba8000 { + compatible = "rockchip,rk3588-vepu121"; + reg = <0x0 0xfdba8000 0x0 0x800>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_JPEG_ENCODER2>, <&cru HCLK_JPEG_ENCODER2>; + clock-names = "aclk", "hclk"; + iommus = <&vepu121_2_mmu>; + power-domains = <&power RK3588_PD_VDPU>; + }; + + vepu121_2_mmu: iommu@fdba8800 { + compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu"; + reg = <0x0 0xfdba8800 0x0 0x40>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_JPEG_ENCODER2>, <&cru HCLK_JPEG_ENCODER2>; + clock-names = "aclk", "iface"; + power-domains = <&power RK3588_PD_VDPU>; + #iommu-cells = <0>; + }; + + vepu121_3: video-codec@fdbac000 { + compatible = "rockchip,rk3588-vepu121"; + reg = <0x0 0xfdbac000 0x0 0x800>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_JPEG_ENCODER3>, <&cru HCLK_JPEG_ENCODER3>; + clock-names = "aclk", "hclk"; + iommus = <&vepu121_3_mmu>; + power-domains = <&power RK3588_PD_VDPU>; + }; + + vepu121_3_mmu: iommu@fdbac800 { + compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu"; + reg = <0x0 0xfdbac800 0x0 0x40>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_JPEG_ENCODER3>, <&cru HCLK_JPEG_ENCODER3>; + clock-names = "aclk", "iface"; + power-domains = <&power RK3588_PD_VDPU>; + #iommu-cells = <0>; + }; + av1d: video-codec@fdc70000 { compatible = "rockchip,rk3588-av1-vpu"; reg = <0x0 0xfdc70000 0x0 0x800>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts new file mode 100644 index 000000000000..6418286efe40 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts @@ -0,0 +1,349 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2024 Rockchip Electronics Co., Ltd. + * + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include "rk3588-coolpi-cm5.dtsi" + +/ { + model = "CoolPi CM5 GenBook"; + compatible = "coolpi,pi-cm5-genbook", "coolpi,pi-cm5", "rockchip,rk3588"; + + backlight: backlight { + compatible = "pwm-backlight"; + enable-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bl_en>; + power-supply = <&vcc12v_dcin>; + pwms = <&pwm6 0 25000 0>; + }; + + battery: battery { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <9800000>; + voltage-max-design-microvolt = <4350000>; + voltage-min-design-microvolt = <3000000>; + }; + + charger: dc-charger { + compatible = "gpio-charger"; + charger-type = "mains"; + gpios = <&gpio1 RK_PC0 GPIO_ACTIVE_LOW>; + }; + + leds: leds { + compatible = "gpio-leds"; + + heartbeat_led: led-0 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + wlan_led: led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_WLAN; + gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; + }; + + charging_red: led-2 { + function = LED_FUNCTION_CHARGING; + color = <LED_COLOR_ID_RED>; + gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_HIGH>; + }; + }; + + vcc12v_dcin: vcc12v-dcin-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc_sys: vcc-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <7000000>; + regulator-max-microvolt = <7000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <7000000>; + regulator-max-microvolt = <7000000>; + vin-supply = <&vcc_sys>; + }; + + vcc3v3_sys: vcc3v3-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc3v3_lcd: vcc3v3-lcd-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_lcd"; + enable-active-high; + gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&lcdpwr_en>; + vin-supply = <&vcc3v3_sys>; + }; + + vcc5v0_usb: vcc5v0-usb-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-boot-on; + regulator-always-on; + enable-active-high; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_pwren>; + vin-supply = <&vcc_sys>; + }; + + vcc5v0_usb_host0: vcc5v0_usb30_host: vcc5v0-usb-host-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_host"; + regulator-boot-on; + regulator-always-on; + enable-active-high; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_host_pwren>; + vin-supply = <&vcc5v0_usb>; + }; +}; + +&i2c4 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4m3_xfer>; + + cw2015@62 { + compatible = "cellwise,cw2015"; + reg = <0x62>; + + cellwise,battery-profile = /bits/ 8 < + 0x17 0x67 0x69 0x63 0x63 0x62 0x62 0x5F + 0x52 0x73 0x4C 0x5A 0x5B 0x4B 0x42 0x3A + 0x33 0x2D 0x29 0x28 0x2E 0x31 0x3C 0x49 + 0x2C 0x2C 0x0C 0xCD 0x30 0x51 0x50 0x66 + 0x74 0x74 0x75 0x78 0x41 0x1B 0x84 0x5F + 0x0B 0x34 0x1C 0x45 0x89 0x92 0xA0 0x13 + 0x2C 0x55 0xAB 0xCB 0x80 0x5E 0x7B 0xCB + 0x2F 0x00 0x64 0xA5 0xB5 0x10 0x18 0x21 + >; + + cellwise,monitor-interval-ms = <3000>; + monitored-battery = <&battery>; + power-supplies = <&charger>; + }; +}; + +&i2c5 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5m3_xfer>; + + touchpad: touchpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PD6 IRQ_TYPE_LEVEL_LOW>; + hid-descr-addr = <0x0020>; + }; +}; + +&gmac0 { + status = "disabled"; +}; + +/* M.2 E-Key */ +&pcie2x1l0 { + reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_sys>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_clkreq &pcie_wake &pcie_rst &wifi_pwron &bt_pwron>; + status = "okay"; +}; + +&pcie2x1l2 { + status = "disabled"; +}; + +&pcie30phy { + status = "okay"; +}; + +/* M.2 M-Key ssd */ +&pcie3x4 { + reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_sys>; + status = "okay"; +}; + +&pinctrl { + lcd { + lcdpwr_en: lcdpwr-en { + rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + bl_en: bl-en { + rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + usb_pwren: usb-pwren { + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + usb_otg_pwren: usb-otg-pwren { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + usb_host_pwren: usb-host-pwren { + rockchip,pins = <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + wifi { + bt_pwron: bt-pwron { + rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + pcie_clkreq: pcie-clkreq { + rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + pcie_rst: pcie-rst { + rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + wifi_pwron: wifi-pwron { + rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + pcie_wake: pcie-wake { + rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pwm6 { + pinctrl-0 = <&pwm6m1_pins>; + status = "okay"; +}; + +&sdmmc { + status = "disabled"; +}; + +&sfc { + pinctrl-names = "default"; + pinctrl-0 = <&fspim2_pins>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-max-frequency = <100000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + }; +}; + +&u2phy0 { + status = "okay"; +}; + +&u2phy0_otg { + status = "okay"; +}; + +&usbdp_phy0 { + status = "okay"; +}; + +&u2phy1 { + status = "okay"; +}; + +&u2phy1_otg { + status = "okay"; +}; + +&u2phy2 { + status = "okay"; +}; + +&u2phy3 { + status = "okay"; +}; + +&u2phy2_host { + phy-supply = <&vcc5v0_usb_host0>; + status = "okay"; +}; + +&u2phy3_host { + phy-supply = <&vcc5v0_usb>; + status = "okay"; +}; + +&usbdp_phy1 { + status = "okay"; +}; + +/* For Keypad */ +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +/* Type C port */ +&usb_host0_xhci { + dr_mode = "peripheral"; + maximum-speed = "high-speed"; + status = "okay"; +}; + +/* connected to a HUB for camera and BT */ +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +/* USB A out */ +&usb_host1_xhci { + dr_mode = "host"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6-lts.dts b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6-lts.dts new file mode 100644 index 000000000000..2d92bbb4027d --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6-lts.dts @@ -0,0 +1,60 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Rockchip Electronics Co., Ltd. + * Copyright (c) 2023 Thomas McKahan + * Copyright (c) 2024 Linaro Ltd. + * + */ + +/dts-v1/; + +#include "rk3588-nanopc-t6.dtsi" + +/ { + model = "FriendlyElec NanoPC-T6 LTS"; + compatible = "friendlyarm,nanopc-t6-lts", "rockchip,rk3588"; + + /* provide power for on-board USB 2.0 hub */ + vcc5v0_usb20_host: vcc5v0-usb20-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&usb20_host_pwren>; + pinctrl-names = "default"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "vcc5v0_usb20_host"; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&pinctrl { + usb { + usb20_host_pwren: usb20-host-pwren { + rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&u2phy1 { + status = "okay"; +}; + +&u2phy1_otg { + status = "okay"; +}; + +&u2phy2_host { + phy-supply = <&vcc5v0_usb20_host>; +}; + +&usbdp_phy1 { + status = "okay"; +}; + +&usb_host1_xhci { + dr_mode = "host"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts index ad8e36a339dc..92321c1d3ff1 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts @@ -2,175 +2,18 @@ /* * Copyright (c) 2021 Rockchip Electronics Co., Ltd. * Copyright (c) 2023 Thomas McKahan + * Copyright (c) 2024 Linaro Ltd. * */ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/rockchip.h> -#include <dt-bindings/usb/pd.h> -#include "rk3588.dtsi" +#include "rk3588-nanopc-t6.dtsi" / { model = "FriendlyElec NanoPC-T6"; compatible = "friendlyarm,nanopc-t6", "rockchip,rk3588"; - aliases { - mmc0 = &sdhci; - mmc1 = &sdmmc; - }; - - chosen { - stdout-path = "serial2:1500000n8"; - }; - - leds { - compatible = "gpio-leds"; - - sys_led: led-0 { - gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; - label = "system-led"; - linux,default-trigger = "heartbeat"; - pinctrl-names = "default"; - pinctrl-0 = <&sys_led_pin>; - }; - - usr_led: led-1 { - gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; - label = "user-led"; - pinctrl-names = "default"; - pinctrl-0 = <&usr_led_pin>; - }; - }; - - sound { - compatible = "simple-audio-card"; - pinctrl-names = "default"; - pinctrl-0 = <&hp_det>; - - simple-audio-card,name = "realtek,rt5616-codec"; - simple-audio-card,format = "i2s"; - simple-audio-card,mclk-fs = <256>; - - simple-audio-card,hp-det-gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_LOW>; - simple-audio-card,hp-pin-name = "Headphones"; - - simple-audio-card,widgets = - "Headphone", "Headphones", - "Microphone", "Microphone Jack"; - simple-audio-card,routing = - "Headphones", "HPOL", - "Headphones", "HPOR", - "MIC1", "Microphone Jack", - "Microphone Jack", "micbias1"; - - simple-audio-card,cpu { - sound-dai = <&i2s0_8ch>; - }; - simple-audio-card,codec { - sound-dai = <&rt5616>; - }; - }; - - vcc12v_dcin: vcc12v-dcin-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc12v_dcin"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - - /* vcc5v0_sys powers peripherals */ - vcc5v0_sys: vcc5v0-sys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc12v_dcin>; - }; - - /* vcc4v0_sys powers the RK806, RK860's */ - vcc4v0_sys: vcc4v0-sys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc4v0_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <4000000>; - regulator-max-microvolt = <4000000>; - vin-supply = <&vcc12v_dcin>; - }; - - vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc-1v1-nldo-s3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - vin-supply = <&vcc4v0_sys>; - }; - - vcc_3v3_pcie20: vcc3v3-pcie20-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_3v3_pcie20"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc_3v3_s3>; - }; - - vbus5v0_typec: vbus5v0-typec-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&typec5v_pwren>; - regulator-name = "vbus5v0_typec"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc5v0_sys>; - }; - - vcc3v3_pcie2x1l0: vcc3v3-pcie2x1l0-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_m2_1_pwren>; - regulator-name = "vcc3v3_pcie2x1l0"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc5v0_sys>; - }; - - vcc3v3_pcie30: vcc3v3-pcie30-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_m2_0_pwren>; - regulator-name = "vcc3v3_pcie30"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc5v0_sys>; - }; - - vcc3v3_sd_s0: vcc3v3-sd-s0-regulator { - compatible = "regulator-fixed"; - enable-active-low; - gpio = <&gpio4 RK_PA5 GPIO_ACTIVE_LOW>; - regulator-boot-on; - regulator-max-microvolt = <3300000>; - regulator-min-microvolt = <3300000>; - regulator-name = "vcc3v3_sd_s0"; - vin-supply = <&vcc_3v3_s3>; - }; - vdd_4g_3v3: vdd-4g-3v3-regulator { compatible = "regulator-fixed"; enable-active-high; @@ -184,762 +27,14 @@ }; }; -&combphy0_ps { - status = "okay"; -}; - -&combphy1_ps { - status = "okay"; -}; - -&combphy2_psu { - status = "okay"; -}; - -&cpu_l0 { - cpu-supply = <&vdd_cpu_lit_s0>; -}; - -&cpu_l1 { - cpu-supply = <&vdd_cpu_lit_s0>; -}; - -&cpu_l2 { - cpu-supply = <&vdd_cpu_lit_s0>; -}; - -&cpu_l3 { - cpu-supply = <&vdd_cpu_lit_s0>; -}; - -&cpu_b0 { - cpu-supply = <&vdd_cpu_big0_s0>; -}; - -&cpu_b1 { - cpu-supply = <&vdd_cpu_big0_s0>; -}; - -&cpu_b2 { - cpu-supply = <&vdd_cpu_big1_s0>; -}; - -&cpu_b3 { - cpu-supply = <&vdd_cpu_big1_s0>; -}; - -&gpio0 { - gpio-line-names = /* GPIO0 A0-A7 */ - "", "", "", "", - "", "", "", "", - /* GPIO0 B0-B7 */ - "", "", "", "", - "", "", "", "", - /* GPIO0 C0-C7 */ - "", "", "", "", - "HEADER_10", "HEADER_08", "HEADER_32", "", - /* GPIO0 D0-D7 */ - "", "", "", "", - "", "", "", ""; -}; - -&gpio1 { - gpio-line-names = /* GPIO1 A0-A7 */ - "HEADER_27", "HEADER_28", "", "", - "", "", "", "HEADER_15", - /* GPIO1 B0-B7 */ - "HEADER_26", "HEADER_21", "HEADER_19", "HEADER_23", - "HEADER_24", "HEADER_22", "", "", - /* GPIO1 C0-C7 */ - "", "", "", "", - "", "", "", "", - /* GPIO1 D0-D7 */ - "", "", "", "", - "", "", "HEADER_05", "HEADER_03"; -}; - -&gpio2 { - gpio-line-names = /* GPIO2 A0-A7 */ - "", "", "", "", - "", "", "", "", - /* GPIO2 B0-B7 */ - "", "", "", "", - "", "", "", "", - /* GPIO2 C0-C7 */ - "", "CSI1_11", "CSI1_12", "", - "", "", "", "", - /* GPIO2 D0-D7 */ - "", "", "", "", - "", "", "", ""; -}; - -&gpio3 { - gpio-line-names = /* GPIO3 A0-A7 */ - "HEADER_35", "HEADER_38", "HEADER_40", "HEADER_36", - "HEADER_37", "", "DSI0_12", "", - /* GPIO3 B0-B7 */ - "HEADER_33", "DSI0_10", "HEADER_07", "HEADER_16", - "HEADER_18", "HEADER_29", "HEADER_31", "HEADER_12", - /* GPIO3 C0-C7 */ - "DSI0_08", "DSI0_14", "HEADER_11", "HEADER_13", - "", "", "", "", - /* GPIO3 D0-D7 */ - "", "", "", "", - "", "DSI1_10", "", ""; -}; - -&gpio4 { - gpio-line-names = /* GPIO4 A0-A7 */ - "DSI1_08", "DSI1_14", "", "DSI1_12", - "", "", "", "", - /* GPIO4 B0-B7 */ - "", "", "", "", - "", "", "", "", - /* GPIO4 C0-C7 */ - "", "", "", "", - "CSI0_11", "CSI0_12", "", "", - /* GPIO4 D0-D7 */ - "", "", "", "", - "", "", "", ""; -}; - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0m2_xfer>; - status = "okay"; - - vdd_cpu_big0_s0: regulator@42 { - compatible = "rockchip,rk8602"; - reg = <0x42>; - fcs,suspend-voltage-selector = <1>; - regulator-name = "vdd_cpu_big0_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <550000>; - regulator-max-microvolt = <1050000>; - regulator-ramp-delay = <2300>; - vin-supply = <&vcc4v0_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_cpu_big1_s0: regulator@43 { - compatible = "rockchip,rk8603", "rockchip,rk8602"; - reg = <0x43>; - fcs,suspend-voltage-selector = <1>; - regulator-name = "vdd_cpu_big1_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <550000>; - regulator-max-microvolt = <1050000>; - regulator-ramp-delay = <2300>; - vin-supply = <&vcc4v0_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; -}; - -&i2c2 { - status = "okay"; - - vdd_npu_s0: regulator@42 { - compatible = "rockchip,rk8602"; - reg = <0x42>; - rockchip,suspend-voltage-selector = <1>; - regulator-name = "vdd_npu_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <550000>; - regulator-max-microvolt = <950000>; - regulator-ramp-delay = <2300>; - vin-supply = <&vcc4v0_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; -}; - -&i2c6 { - clock-frequency = <200000>; - status = "okay"; - - fusb302: typec-portc@22 { - compatible = "fcs,fusb302"; - reg = <0x22>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>; - pinctrl-0 = <&usbc0_int>; - pinctrl-names = "default"; - vbus-supply = <&vbus5v0_typec>; - - connector { - compatible = "usb-c-connector"; - data-role = "dual"; - label = "USB-C"; - power-role = "dual"; - try-power-role = "sink"; - source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>; - sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; - op-sink-microwatt = <1000000>; - }; - }; - - hym8563: rtc@51 { - compatible = "haoyu,hym8563"; - reg = <0x51>; - #clock-cells = <0>; - clock-output-names = "hym8563"; - pinctrl-names = "default"; - pinctrl-0 = <&hym8563_int>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; - wakeup-source; - }; -}; - -&i2c7 { - clock-frequency = <200000>; - status = "okay"; - - rt5616: codec@1b { - compatible = "realtek,rt5616"; - reg = <0x1b>; - clocks = <&cru I2S0_8CH_MCLKOUT>; - clock-names = "mclk"; - #sound-dai-cells = <0>; - assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; - assigned-clock-rates = <12288000>; - - port { - rt5616_p0_0: endpoint { - remote-endpoint = <&i2s0_8ch_p0_0>; - }; - }; - }; - - /* connected with MIPI-CSI1 */ -}; - -&i2c8 { - pinctrl-0 = <&i2c8m2_xfer>; -}; - -&i2s0_8ch { - pinctrl-names = "default"; - pinctrl-0 = <&i2s0_lrck - &i2s0_mclk - &i2s0_sclk - &i2s0_sdi0 - &i2s0_sdo0>; - status = "okay"; - - i2s0_8ch_p0: port { - i2s0_8ch_p0_0: endpoint { - dai-format = "i2s"; - mclk-fs = <256>; - remote-endpoint = <&rt5616_p0_0>; - }; - }; -}; - -&pcie2x1l0 { - reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>; - vpcie3v3-supply = <&vcc_3v3_pcie20>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie2_0_rst>; - status = "okay"; -}; - -&pcie2x1l1 { - reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>; - vpcie3v3-supply = <&vcc3v3_pcie2x1l0>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie2_1_rst>; - status = "okay"; -}; - -&pcie2x1l2 { - reset-gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>; - vpcie3v3-supply = <&vcc_3v3_pcie20>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie2_2_rst>; - status = "okay"; -}; - -&pcie30phy { - status = "okay"; -}; - -&pcie3x4 { - reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; - vpcie3v3-supply = <&vcc3v3_pcie30>; - status = "okay"; -}; - &pinctrl { - gpio-leds { - sys_led_pin: sys-led-pin { - rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - usr_led_pin: usr-led-pin { - rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - headphone { - hp_det: hp-det { - rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - hym8563 { - hym8563_int: hym8563-int { - rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - pcie { - pcie2_0_rst: pcie2-0-rst { - rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - pcie2_1_rst: pcie2-1-rst { - rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - pcie2_2_rst: pcie2-2-rst { - rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - pcie_m2_0_pwren: pcie-m20-pwren { - rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - pcie_m2_1_pwren: pcie-m21-pwren { - rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - usb { pin_4g_lte_pwren: 4g-lte-pwren { rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; }; - - typec5v_pwren: typec5v-pwren { - rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - usbc0_int: usbc0-int { - rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; -}; - -&pwm1 { - pinctrl-0 = <&pwm1m1_pins>; - status = "okay"; -}; - -&saradc { - vref-supply = <&avcc_1v8_s0>; - status = "okay"; -}; - -&sdhci { - bus-width = <8>; - no-sdio; - no-sd; - non-removable; - max-frequency = <200000000>; - mmc-hs400-1_8v; - mmc-hs400-enhanced-strobe; - status = "okay"; -}; - -&sdmmc { - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; - disable-wp; - no-mmc; - no-sdio; - sd-uhs-sdr104; - vmmc-supply = <&vcc3v3_sd_s0>; - vqmmc-supply = <&vccio_sd_s0>; - status = "okay"; -}; - -&spi2 { - status = "okay"; - assigned-clocks = <&cru CLK_SPI2>; - assigned-clock-rates = <200000000>; - pinctrl-names = "default"; - pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; - num-cs = <1>; - - pmic@0 { - compatible = "rockchip,rk806"; - spi-max-frequency = <1000000>; - reg = <0x0>; - - interrupt-parent = <&gpio0>; - interrupts = <7 IRQ_TYPE_LEVEL_LOW>; - - pinctrl-names = "default"; - pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, - <&rk806_dvs2_null>, <&rk806_dvs3_null>; - - system-power-controller; - - vcc1-supply = <&vcc4v0_sys>; - vcc2-supply = <&vcc4v0_sys>; - vcc3-supply = <&vcc4v0_sys>; - vcc4-supply = <&vcc4v0_sys>; - vcc5-supply = <&vcc4v0_sys>; - vcc6-supply = <&vcc4v0_sys>; - vcc7-supply = <&vcc4v0_sys>; - vcc8-supply = <&vcc4v0_sys>; - vcc9-supply = <&vcc4v0_sys>; - vcc10-supply = <&vcc4v0_sys>; - vcc11-supply = <&vcc_2v0_pldo_s3>; - vcc12-supply = <&vcc4v0_sys>; - vcc13-supply = <&vcc_1v1_nldo_s3>; - vcc14-supply = <&vcc_1v1_nldo_s3>; - vcca-supply = <&vcc4v0_sys>; - - gpio-controller; - #gpio-cells = <2>; - - rk806_dvs1_null: dvs1-null-pins { - pins = "gpio_pwrctrl1"; - function = "pin_fun0"; - }; - - rk806_dvs2_null: dvs2-null-pins { - pins = "gpio_pwrctrl2"; - function = "pin_fun0"; - }; - - rk806_dvs3_null: dvs3-null-pins { - pins = "gpio_pwrctrl3"; - function = "pin_fun0"; - }; - - regulators { - vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { - regulator-boot-on; - regulator-min-microvolt = <550000>; - regulator-max-microvolt = <950000>; - regulator-ramp-delay = <12500>; - regulator-name = "vdd_gpu_s0"; - regulator-enable-ramp-delay = <400>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <550000>; - regulator-max-microvolt = <950000>; - regulator-ramp-delay = <12500>; - regulator-name = "vdd_cpu_lit_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_log_s0: dcdc-reg3 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <750000>; - regulator-ramp-delay = <12500>; - regulator-name = "vdd_log_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <750000>; - }; - }; - - vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <550000>; - regulator-max-microvolt = <950000>; - regulator-init-microvolt = <750000>; - regulator-ramp-delay = <12500>; - regulator-name = "vdd_vdenc_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_ddr_s0: dcdc-reg5 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <900000>; - regulator-ramp-delay = <12500>; - regulator-name = "vdd_ddr_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <850000>; - }; - }; - - vdd2_ddr_s3: dcdc-reg6 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vdd2_ddr_s3"; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_2v0_pldo_s3: dcdc-reg7 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - regulator-ramp-delay = <12500>; - regulator-name = "vdd_2v0_pldo_s3"; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <2000000>; - }; - }; - - vcc_3v3_s3: dcdc-reg8 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc_3v3_s3"; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vddq_ddr_s0: dcdc-reg9 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vddq_ddr_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v8_s3: dcdc-reg10 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc_1v8_s3"; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - avcc_1v8_s0: pldo-reg1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "avcc_1v8_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v8_s0: pldo-reg2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc_1v8_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - avdd_1v2_s0: pldo-reg3 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-name = "avdd_1v2_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_3v3_s0: pldo-reg4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-ramp-delay = <12500>; - regulator-name = "vcc_3v3_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vccio_sd_s0: pldo-reg5 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-ramp-delay = <12500>; - regulator-name = "vccio_sd_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - pldo6_s3: pldo-reg6 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "pldo6_s3"; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vdd_0v75_s3: nldo-reg1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <750000>; - regulator-name = "vdd_0v75_s3"; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <750000>; - }; - }; - - vdd_ddr_pll_s0: nldo-reg2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <850000>; - regulator-name = "vdd_ddr_pll_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <850000>; - }; - }; - - avdd_0v75_s0: nldo-reg3 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <750000>; - regulator-name = "avdd_0v75_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_0v85_s0: nldo-reg4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <850000>; - regulator-name = "vdd_0v85_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_0v75_s0: nldo-reg5 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <750000>; - regulator-name = "vdd_0v75_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; }; }; -&tsadc { - status = "okay"; -}; - -&uart2 { - pinctrl-0 = <&uart2m0_xfer>; - status = "okay"; -}; - &u2phy2_host { phy-supply = <&vdd_4g_3v3>; - status = "okay"; -}; - -&u2phy3_host { - status = "okay"; -}; - -&u2phy2 { - status = "okay"; -}; - -&u2phy3 { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi new file mode 100644 index 000000000000..fc131789b4c3 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi @@ -0,0 +1,1041 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Rockchip Electronics Co., Ltd. + * Copyright (c) 2023 Thomas McKahan + * + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/usb/pd.h> +#include "rk3588.dtsi" + +/ { + model = "FriendlyElec NanoPC-T6"; + compatible = "friendlyarm,nanopc-t6", "rockchip,rk3588"; + + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc; + }; + + adc-keys-0 { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-maskrom { + label = "Mask Rom"; + linux,code = <KEY_SETUP>; + press-threshold-microvolt = <2000>; + }; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_receiver_pin>; + }; + + leds { + compatible = "gpio-leds"; + + sys_led: led-0 { + gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; + label = "system-led"; + linux,default-trigger = "heartbeat"; + pinctrl-names = "default"; + pinctrl-0 = <&sys_led_pin>; + }; + + usr_led: led-1 { + gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; + label = "user-led"; + pinctrl-names = "default"; + pinctrl-0 = <&usr_led_pin>; + }; + }; + + sound { + compatible = "simple-audio-card"; + pinctrl-names = "default"; + pinctrl-0 = <&hp_det>; + + simple-audio-card,name = "realtek,rt5616-codec"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <256>; + + simple-audio-card,hp-det-gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_LOW>; + + simple-audio-card,widgets = + "Headphone", "Headphones", + "Microphone", "Microphone Jack"; + simple-audio-card,routing = + "Headphones", "HPOL", + "Headphones", "HPOR", + "MIC1", "Microphone Jack", + "Microphone Jack", "micbias1"; + + simple-audio-card,cpu { + sound-dai = <&i2s0_8ch>; + }; + simple-audio-card,codec { + sound-dai = <&rt5616>; + }; + }; + + vcc12v_dcin: vcc12v-dcin-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + /* vcc5v0_sys powers peripherals */ + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + /* vcc4v0_sys powers the RK806, RK860's */ + vcc4v0_sys: vcc4v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc4v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <4000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc-1v1-nldo-s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc4v0_sys>; + }; + + vcc_3v3_pcie20: vcc3v3-pcie20-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_pcie20"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3_s3>; + }; + + vbus5v0_typec: vbus5v0-typec-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&typec5v_pwren>; + regulator-always-on; + regulator-boot-on; + regulator-name = "vbus5v0_typec"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc3v3_pcie2x1l0: vcc3v3-pcie2x1l0-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_m2_1_pwren>; + regulator-name = "vcc3v3_pcie2x1l0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc3v3_pcie30: vcc3v3-pcie30-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_m2_0_pwren>; + regulator-name = "vcc3v3_pcie30"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc3v3_sd_s0: vcc3v3-sd-s0-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio4 RK_PA5 GPIO_ACTIVE_LOW>; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "vcc3v3_sd_s0"; + vin-supply = <&vcc_3v3_s3>; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&combphy1_ps { + status = "okay"; +}; + +&combphy2_psu { + status = "okay"; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&gpio0 { + gpio-line-names = /* GPIO0 A0-A7 */ + "", "", "", "", + "", "", "", "", + /* GPIO0 B0-B7 */ + "", "", "", "", + "", "", "", "", + /* GPIO0 C0-C7 */ + "", "", "", "", + "HEADER_10", "HEADER_08", "HEADER_32", "", + /* GPIO0 D0-D7 */ + "", "", "", "", + "IR receiver [PWM3_IR_M0]", "", "", ""; +}; + +&gpio1 { + gpio-line-names = /* GPIO1 A0-A7 */ + "HEADER_27", "HEADER_28", "", "", + "", "", "", "HEADER_15", + /* GPIO1 B0-B7 */ + "HEADER_26", "HEADER_21", "HEADER_19", "HEADER_23", + "HEADER_24", "HEADER_22", "", "", + /* GPIO1 C0-C7 */ + "", "", "", "", + "", "", "", "", + /* GPIO1 D0-D7 */ + "", "", "", "", + "", "", "HEADER_05", "HEADER_03"; +}; + +&gpio2 { + gpio-line-names = /* GPIO2 A0-A7 */ + "", "", "", "", + "", "", "", "", + /* GPIO2 B0-B7 */ + "", "", "", "", + "", "", "", "", + /* GPIO2 C0-C7 */ + "", "CSI1_11", "CSI1_12", "", + "", "", "", "", + /* GPIO2 D0-D7 */ + "", "", "", "", + "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = /* GPIO3 A0-A7 */ + "HEADER_35", "HEADER_38", "HEADER_40", "HEADER_36", + "HEADER_37", "", "DSI0_12", "", + /* GPIO3 B0-B7 */ + "HEADER_33", "DSI0_10", "HEADER_07", "HEADER_16", + "HEADER_18", "HEADER_29", "HEADER_31", "HEADER_12", + /* GPIO3 C0-C7 */ + "DSI0_08", "DSI0_14", "HEADER_11", "HEADER_13", + "", "", "", "", + /* GPIO3 D0-D7 */ + "", "", "", "", + "", "DSI1_10", "", ""; +}; + +&gpio4 { + gpio-line-names = /* GPIO4 A0-A7 */ + "DSI1_08", "DSI1_14", "", "DSI1_12", + "", "", "", "", + /* GPIO4 B0-B7 */ + "", "", "", "", + "", "", "", "", + /* GPIO4 C0-C7 */ + "", "", "", "", + "CSI0_11", "CSI0_12", "", "", + /* GPIO4 D0-D7 */ + "", "", "", "", + "", "", "", ""; +}; + +&gpu { + mali-supply = <&vdd_gpu_s0>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0m2_xfer>; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc4v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc4v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c2 { + status = "okay"; + + vdd_npu_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_npu_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc4v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c6 { + clock-frequency = <200000>; + status = "okay"; + + fusb302: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&usbc0_int>; + pinctrl-names = "default"; + vbus-supply = <&vbus5v0_typec>; + + connector { + compatible = "usb-c-connector"; + data-role = "dual"; + label = "USB-C"; + power-role = "source"; + source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usbc0_hs: endpoint { + remote-endpoint = <&usb_host0_xhci_drd_sw>; + }; + }; + + port@1 { + reg = <1>; + usbc0_ss: endpoint { + remote-endpoint = <&usbdp_phy0_typec_ss>; + }; + }; + + port@2 { + reg = <2>; + usbc0_sbu: endpoint { + remote-endpoint = <&usbdp_phy0_typec_sbu>; + }; + }; + }; + }; + }; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; + wakeup-source; + }; +}; + +&i2c7 { + clock-frequency = <200000>; + status = "okay"; + + rt5616: codec@1b { + compatible = "realtek,rt5616"; + reg = <0x1b>; + clocks = <&cru I2S0_8CH_MCLKOUT>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; + assigned-clock-rates = <12288000>; + + port { + rt5616_p0_0: endpoint { + remote-endpoint = <&i2s0_8ch_p0_0>; + }; + }; + }; + + /* connected with MIPI-CSI1 */ +}; + +&i2c8 { + pinctrl-0 = <&i2c8m2_xfer>; +}; + +&i2s0_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_lrck + &i2s0_mclk + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdo0>; + status = "okay"; + + i2s0_8ch_p0: port { + i2s0_8ch_p0_0: endpoint { + dai-format = "i2s"; + mclk-fs = <256>; + remote-endpoint = <&rt5616_p0_0>; + }; + }; +}; + +&pcie2x1l0 { + reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc_3v3_pcie20>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie2_0_rst>; + status = "okay"; +}; + +&pcie2x1l1 { + reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie2x1l0>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie2_1_rst>; + status = "okay"; +}; + +&pcie2x1l2 { + reset-gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc_3v3_pcie20>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie2_2_rst>; + status = "okay"; +}; + +&pcie30phy { + status = "okay"; +}; + +&pcie3x4 { + reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie30>; + status = "okay"; +}; + +&pinctrl { + gpio-leds { + sys_led_pin: sys-led-pin { + rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usr_led_pin: usr-led-pin { + rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + headphone { + hp_det: hp-det { + rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + ir-receiver { + ir_receiver_pin: ir-receiver-pin { + rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie { + pcie2_0_rst: pcie2-0-rst { + rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie2_1_rst: pcie2-1-rst { + rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie2_2_rst: pcie2-2-rst { + rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie_m2_0_pwren: pcie-m20-pwren { + rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie_m2_1_pwren: pcie-m21-pwren { + rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + typec5v_pwren: typec5v-pwren { + rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usbc0_int: usbc0-int { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pwm1 { + pinctrl-0 = <&pwm1m1_pins>; + status = "okay"; +}; + +&saradc { + vref-supply = <&avcc_1v8_s0>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + no-sdio; + no-sd; + non-removable; + max-frequency = <200000000>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + disable-wp; + no-mmc; + no-sdio; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_sd_s0>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +/* optional on non-LTS, populated on LTS version */ +&sfc { + pinctrl-names = "default"; + pinctrl-0 = <&fspim1_pins>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <104000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + }; +}; + +&spi2 { + status = "okay"; + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + num-cs = <1>; + + pmic@0 { + compatible = "rockchip,rk806"; + spi-max-frequency = <1000000>; + reg = <0x0>; + + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + + system-power-controller; + + vcc1-supply = <&vcc4v0_sys>; + vcc2-supply = <&vcc4v0_sys>; + vcc3-supply = <&vcc4v0_sys>; + vcc4-supply = <&vcc4v0_sys>; + vcc5-supply = <&vcc4v0_sys>; + vcc6-supply = <&vcc4v0_sys>; + vcc7-supply = <&vcc4v0_sys>; + vcc8-supply = <&vcc4v0_sys>; + vcc9-supply = <&vcc4v0_sys>; + vcc10-supply = <&vcc4v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc4v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc4v0_sys>; + + gpio-controller; + #gpio-cells = <2>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_s0"; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_lit_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_log_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_vdenc_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_2v0_pldo_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vddq_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "avcc_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avdd_1v2_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "avdd_1v2_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_3v3_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vccio_sd_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "pldo6_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_ddr_pll_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + avdd_0v75_s0: nldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "avdd_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_0v85_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&tsadc { + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; +}; + +&u2phy0_otg { + status = "okay"; +}; + +&u2phy2_host { + status = "okay"; +}; + +&u2phy3_host { + status = "okay"; +}; + +&u2phy2 { + status = "okay"; +}; + +&u2phy3 { + status = "okay"; +}; + +&usbdp_phy0 { + mode-switch; + orientation-switch; + sbu1-dc-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>; + sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>; + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + usbdp_phy0_typec_ss: endpoint@0 { + reg = <0>; + remote-endpoint = <&usbc0_ss>; + }; + + usbdp_phy0_typec_sbu: endpoint@1 { + reg = <1>; + remote-endpoint = <&usbc0_sbu>; + }; + }; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host0_xhci { + dr_mode = "host"; + status = "okay"; + usb-role-switch; + + port { + usb_host0_xhci_drd_sw: endpoint { + remote-endpoint = <&usbc0_hs>; + }; + }; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts index e74871491ef5..c3a6812cc93a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts @@ -105,6 +105,13 @@ }; }; + rfkill { + compatible = "rfkill-gpio"; + label = "rfkill-pcie-wlan"; + radio-type = "wlan"; + shutdown-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; + }; + sound { compatible = "simple-audio-card"; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts b/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts new file mode 100644 index 000000000000..467f69594089 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts @@ -0,0 +1,1237 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/thermal/thermal.h> +#include <dt-bindings/usb/pd.h> +#include "rk3588s.dtsi" + +/ { + model = "Gameforce Ace"; + chassis-type = "handset"; + compatible = "gameforce,ace", "rockchip,rk3588s"; + + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc; + mmc2 = &sdio; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + adc_keys: adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <60>; + + button-vol-up { + label = "VOLUMEUP"; + linux,code = <KEY_VOLUMEUP>; + press-threshold-microvolt = <17000>; + }; + + button-vol-down { + label = "VOLUMEDOWN"; + linux,code = <KEY_VOLUMEDOWN>; + press-threshold-microvolt = <417000>; + }; + }; + + /* Joystick range values based on hardware observation. */ + adc_joystick: adc-joystick { + compatible = "adc-joystick"; + io-channels = <&saradc 2>, <&saradc 3>, + <&saradc 4>, <&saradc 5>; + poll-interval = <60>; + #address-cells = <1>; + #size-cells = <0>; + + axis@0 { + reg = <0>; + abs-flat = <40>; + abs-fuzz = <30>; + abs-range = <0 4095>; + linux,code = <ABS_RX>; + }; + + axis@1 { + reg = <1>; + abs-flat = <40>; + abs-fuzz = <30>; + abs-range = <0 4095>; + linux,code = <ABS_RY>; + }; + + axis@2 { + reg = <2>; + abs-flat = <40>; + abs-fuzz = <30>; + abs-range = <0 4095>; + linux,code = <ABS_Y>; + }; + + axis@3 { + reg = <3>; + abs-flat = <40>; + abs-fuzz = <30>; + abs-range = <0 4095>; + linux,code = <ABS_X>; + }; + }; + + /* Trigger range values based on hardware observation. */ + adc_triggers: adc-trigger { + compatible = "adc-joystick"; + io-channels = <&ti_adc 6>, + <&ti_adc 7>; + poll-interval = <60>; + #address-cells = <1>; + #size-cells = <0>; + + axis@0 { + reg = <0>; + abs-flat = <15>; + abs-fuzz = <15>; + abs-range = <890 1530>; + linux,code = <ABS_HAT2X>; + }; + + axis@1 { + reg = <1>; + abs-flat = <15>; + abs-fuzz = <15>; + abs-range = <1010 1550>; + linux,code = <ABS_HAT2Y>; + }; + }; + + analog-sound { + compatible = "simple-audio-card"; + pinctrl-0 = <&hp_detect>; + pinctrl-names = "default"; + simple-audio-card,aux-devs = <&_headphone>, <&_speaker>; + simple-audio-card,bitclock-master = <&masterdai>; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&masterdai>; + simple-audio-card,hp-det-gpio = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,name = "rockchip,es8388-codec"; + simple-audio-card,pin-switches = "Headphones", "Speaker"; + simple-audio-card,routing = + "Speaker Amplifier INL", "LOUT2", + "Speaker Amplifier INR", "ROUT2", + "Speaker", "Speaker Amplifier OUTL", + "Speaker", "Speaker Amplifier OUTR", + "Headphones Amplifier INL", "LOUT1", + "Headphones Amplifier INR", "ROUT1", + "Headphones", "Headphones Amplifier OUTL", + "Headphones", "Headphones Amplifier OUTR", + "LINPUT1", "Microphone Jack", + "RINPUT1", "Microphone Jack", + "LINPUT2", "Onboard Microphone", + "RINPUT2", "Onboard Microphone"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Microphone", "Onboard Microphone", + "Headphone", "Headphones", + "Speaker", "Speaker"; + + masterdai: simple-audio-card,codec { + sound-dai = <&es8388>; + system-clock-frequency = <12288000>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s0_8ch>; + }; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + enable-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&lcd_bl_en>; + pinctrl-names = "default"; + pwms = <&pwm13 0 25000 PWM_POLARITY_INVERTED>; + }; + + battery: battery { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <3700000>; + constant-charge-current-max-microamp = <2500000>; + constant-charge-voltage-max-microvolt = <8750000>; + voltage-min-design-microvolt = <7400000>; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&btn_pins_ctrl>; + pinctrl-names = "default"; + + button-a { + gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>; + label = "EAST"; + linux,code = <BTN_EAST>; + }; + + button-b { + gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>; + label = "SOUTH"; + linux,code = <BTN_SOUTH>; + }; + + button-down { + gpios = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>; + label = "DPAD-DOWN"; + linux,code = <BTN_DPAD_DOWN>; + }; + + button-home { + gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_LOW>; + label = "FUNCTION"; + linux,code = <BTN_MODE>; + }; + + button-l1 { + gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>; + label = "L1"; + linux,code = <BTN_TL>; + }; + + button-left { + gpios = <&gpio1 RK_PD7 GPIO_ACTIVE_LOW>; + label = "DPAD-LEFT"; + linux,code = <BTN_DPAD_LEFT>; + }; + + button-menu { + gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>; + label = "HOME"; + linux,code = <KEY_HOME>; + }; + + button-r1 { + gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_LOW>; + label = "R1"; + linux,code = <BTN_TR>; + }; + + button-right { + gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>; + label = "DPAD-RIGHT"; + linux,code = <BTN_DPAD_RIGHT>; + }; + + button-select { + gpios = <&gpio1 RK_PA3 GPIO_ACTIVE_LOW>; + label = "SELECT"; + linux,code = <BTN_SELECT>; + }; + + button-start { + gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>; + label = "START"; + linux,code = <BTN_START>; + }; + + button-thumbl { + gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_LOW>; + label = "THUMBL"; + linux,code = <BTN_THUMBL>; + }; + + button-thumbr { + gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>; + label = "THUMBR"; + linux,code = <BTN_THUMBR>; + }; + + button-up { + gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>; + label = "DPAD-UP"; + linux,code = <BTN_DPAD_UP>; + }; + + button-x { + gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>; + label = "NORTH"; + linux,code = <BTN_NORTH>; + }; + + button-y { + gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_LOW>; + label = "WEST"; + linux,code = <BTN_WEST>; + }; + }; + + gpio_leds: gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + green_led: led-0 { + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_STATUS; + }; + + red_led: led-1 { + color = <LED_COLOR_ID_RED>; + gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_CHARGING; + }; + }; + + amp_headphone: headphone-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&headphone_amplifier_en>; + pinctrl-names = "default"; + sound-name-prefix = "Headphones Amplifier"; + }; + + pwm_fan: pwm-fan { + compatible = "pwm-fan"; + #cooling-cells = <2>; + cooling-levels = <0 120 150 180 210 240 255>; + fan-supply = <&vcc5v0_sys>; + interrupt-parent = <&gpio4>; + interrupts = <RK_PB2 IRQ_TYPE_EDGE_RISING>; + pulses-per-revolution = <4>; + pwms = <&pwm12 0 50000 PWM_POLARITY_INVERTED>; + }; + + pwm_gpio33: pwm-33 { + compatible = "pwm-gpio"; + gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&vib_right_h>; + pinctrl-names = "default"; + #pwm-cells = <3>; + }; + + pwm_gpio132: pwm-132 { + compatible = "pwm-gpio"; + gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&vib_left_h>; + pinctrl-names = "default"; + #pwm-cells = <3>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clock-names = "ext_clock"; + clocks = <&rtc_hym8563>; + pinctrl-0 = <&wifi_enable_h>; + pinctrl-names = "default"; + post-power-on-delay-ms = <200>; + power-off-delay-us = <5000000>; + reset-gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>; + }; + + amp_speaker: speaker-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&speaker_amplifier_en>; + pinctrl-names = "default"; + sound-name-prefix = "Speaker Amplifier"; + VCC-supply = <&vcc5v0_spk>; + }; + + vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1100000>; + regulator-min-microvolt = <1100000>; + regulator-name = "vcc_1v1_nldo_s3"; + vin-supply = <&vcc5v0_sys>; + }; + + vcc3v3_lcd0_n: vcc3v3-lcd0-n-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&vcc_lcd_h>; + pinctrl-names = "default"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "vcc3v3_lcd0_n"; + vin-supply = <&vcc_3v3_s3>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_sd_s0: vcc-3v3-sd-s0-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&sd_s0_pwr>; + pinctrl-names = "default"; + regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <3000000>; + regulator-name = "vcc_3v3_sd_s0"; + vin-supply = <&vcc_3v3_s3>; + }; + + vcc5v0_spk: vcc5v0-spk-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&vcc5v0_spk_pwr>; + pinctrl-names = "default"; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "vcc5v0_spk"; + vin-supply = <&vcc5v0_sys>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "vcc5v0_sys"; + }; + + vibrator_l: vibrator-l { + compatible = "pwm-vibrator"; + pwm-names = "enable"; + pwms = <&pwm_gpio132 0 20000000 0>; + }; + + vibrator_r: vibrator-r { + compatible = "pwm-vibrator"; + pwm-names = "enable"; + pwms = <&pwm_gpio33 0 20000000 0>; + }; +}; + +&combphy2_psu { + status = "okay"; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&gpu { + mali-supply = <&vdd_gpu_s0>; + status = "okay"; +}; + +&i2c0 { + pinctrl-0 = <&i2c0m2_xfer>; + pinctrl-names = "default"; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-max-microvolt = <1050000>; + regulator-min-microvolt = <550000>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-max-microvolt = <1050000>; + regulator-min-microvolt = <550000>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c2 { + status = "okay"; + + vdd_npu_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-max-microvolt = <950000>; + regulator-min-microvolt = <550000>; + regulator-name = "vdd_npu_s0"; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c3 { + status = "okay"; + + touchscreen@14 { + compatible = "goodix,gt911"; + reg = <0x14>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PA6 IRQ_TYPE_LEVEL_LOW>; + irq-gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&touch_int>, <&touch_rst>; + pinctrl-names = "default"; + reset-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>; + touchscreen-inverted-x; + touchscreen-size-x = <1080>; + touchscreen-size-y = <1920>; + touchscreen-swapped-x-y; + }; +}; + +&i2c4 { + pinctrl-0 = <&i2c4m2_xfer>; + status = "okay"; + + ti_adc: adc@48 { + compatible = "ti,ads1015"; + reg = <0x48>; + #address-cells = <1>; + #io-channel-cells = <1>; + #size-cells = <0>; + + channel@4 { + reg = <4>; + }; + + channel@5 { + reg = <5>; + }; + + channel@6 { + reg = <6>; + }; + + channel@7 { + reg = <7>; + }; + }; + + imu@68 { + compatible = "invensense,mpu6880"; + reg = <0x68>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PD3 IRQ_TYPE_EDGE_RISING>; + }; +}; + +&i2c6 { + pinctrl-0 = <&i2c6m3_xfer>; + status = "okay"; + + rtc_hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&hym8563_int>, <&clk32k_in>; + pinctrl-names = "default"; + wakeup-source; + }; + + /* Battery profile from BSP device tree. */ + battery@62 { + compatible = "cellwise,cw2015"; + reg = <0x62>; + + cellwise,battery-profile = /bits/ 8 + <0x18 0x0A 0x76 0x6A 0x6A 0x6A 0x68 0x66 + 0x62 0x5E 0x5A 0x58 0x5F 0x59 0x46 0x3D + 0x35 0x2D 0x28 0x21 0x29 0x38 0x44 0x50 + 0x1A 0x85 0x07 0xAE 0x14 0x28 0x48 0x56 + 0x66 0x66 0x66 0x6A 0x3E 0x1A 0x6C 0x3D + 0x09 0x38 0x1A 0x49 0x7B 0x96 0xA2 0x15 + 0x3B 0x77 0x9A 0xB1 0x80 0x87 0xB0 0xCB + 0x2F 0x00 0x64 0xA5 0xB5 0x1C 0xF0 0x49>; + cellwise,monitor-interval-ms = <5000>; + monitored-battery = <&battery>; + status = "okay"; + }; +}; + +&i2c7 { + status = "okay"; + + es8388: audio-codec@11 { + compatible = "everest,es8388"; + reg = <0x11>; + assigned-clock-rates = <12288000>; + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; + AVDD-supply = <&vcc_3v3_s3>; + clocks = <&cru I2S0_8CH_MCLKOUT>; + DVDD-supply = <&vcc_1v8_s3>; + HPVDD-supply = <&vcc_3v3_s3>; + PVDD-supply = <&vcc_1v8_s3>; + #sound-dai-cells = <0>; + }; +}; + +&i2s0_8ch { + pinctrl-0 = <&i2s0_lrck + &i2s0_mclk + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdo0>; + status = "okay"; +}; + +&package_thermal { + polling-delay = <1000>; + + trips { + package_fan0: package-fan0 { + temperature = <55000>; + hysteresis = <2000>; + type = "active"; + }; + + package_fan1: package-fan1 { + temperature = <65000>; + hysteresis = <2000>; + type = "active"; + }; + }; + + cooling-maps { + map1 { + trip = <&package_fan0>; + cooling-device = <&pwm_fan THERMAL_NO_LIMIT 1>; + }; + + map2 { + trip = <&package_fan1>; + cooling-device = <&pwm_fan 2 THERMAL_NO_LIMIT>; + }; + }; +}; + +/* + * Attempts to use an M.2 SATA in this slot worked intermittently + * with the correct nodes enabled in device-tree, but eventually + * resulted in a destroyed board. Advise caution. + */ +&pcie2x1l1 { + pinctrl-0 = <&pcie_rst>; + pinctrl-names = "default"; + reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pinctrl { + audio-amplifier { + headphone_amplifier_en: headphone-amplifier-en { + rockchip,pins = + <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + hp_detect: headphone-detect { + rockchip,pins = + <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + speaker_amplifier_en: speaker-amplifier-en { + rockchip,pins = + <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + bt { + bt_enable_h: bt-enable-h { + rockchip,pins = + <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = + <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = + <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + charger { + boost_enable_h: boost-enable-h { + rockchip,pins = + <4 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + charger_int_h: charger-int-h { + rockchip,pins = + <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = + <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + gpio-btns { + btn_pins_ctrl: btn-pins-ctrl { + rockchip,pins = + <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + gpio-leds { + led_pins: led-pins { + rockchip,pins = + <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + lcd_bl_en { + lcd_bl_en: lcd-bl-en { + rockchip,pins = + <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie-pins { + pcie_rst: pcie-rst { + rockchip,pins = + <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sd-pwr { + sd_s0_pwr: sd-s0-pwr { + rockchip,pins = + <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + spk-pwr { + vcc5v0_spk_pwr: vcc5v0-spk-pwr { + rockchip,pins = + <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + touch { + touch_int: touch-int { + rockchip,pins = + <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + touch_rst: touch-rst { + rockchip,pins = + <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb-typec { + usbc0_int: usbc0-int { + rockchip,pins = + <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + vcc3v3-lcd { + vcc_lcd_h: vcc-lcd-h { + rockchip,pins = + <4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + vibrator { + vib_left_h: vib-left-h { + rockchip,pins = + <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vib_right_h: vib-right-h { + rockchip,pins = + <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + wifi { + wifi_enable_h: wifi-enable-h { + rockchip,pins = + <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + wifi_host_wake_irq: wifi-host-wake-irq { + rockchip,pins = + <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; +}; + +&pwm12 { + pinctrl-0 = <&pwm12m1_pins>; + status = "okay"; +}; + +&pwm13 { + pinctrl-0 = <&pwm13m1_pins>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_1v8_s0>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + no-sd; + no-sdio; + non-removable; + status = "okay"; +}; + +&sdio { + #address-cells = <1>; + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + disable-wp; + keep-power-in-suspend; + max-frequency = <150000000>; + mmc-pwrseq = <&sdio_pwrseq>; + no-mmc; + no-sd; + sd-uhs-sdr104; + #size-cells = <0>; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm43456-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + pinctrl-0 = <&wifi_host_wake_irq>; + pinctrl-names = "default"; + }; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + max-frequency = <150000000>; + no-sdio; + no-mmc; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_sd_s0>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +&spi2 { + #address-cells = <1>; + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <1>; + pinctrl-0 = <&spi2m2_pins>, <&spi2m2_cs0>; + pinctrl-names = "default"; + #size-cells = <0>; + status = "okay"; + + pmic@0 { + compatible = "rockchip,rk806"; + reg = <0x0>; + #gpio-cells = <2>; + gpio-controller; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + pinctrl-names = "default"; + spi-max-frequency = <1000000>; + system-power-controller; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: dcdc-reg1 { + regulator-boot-on; + regulator-enable-ramp-delay = <400>; + regulator-max-microvolt = <950000>; + regulator-min-microvolt = <550000>; + regulator-name = "vdd_gpu_s0"; + regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: dcdc-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <950000>; + regulator-min-microvolt = <550000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_lit_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_logic_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <750000>; + regulator-min-microvolt = <675000>; + regulator-name = "vdd_logic_s0"; + regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <950000>; + regulator-min-microvolt = <550000>; + regulator-name = "vdd_vdenc_s0"; + regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_ddr_s0"; + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <2000000>; + regulator-min-microvolt = <2000000>; + regulator-name = "vdd_2v0_pldo_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "vcc_3v3_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vddq_ddr_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "vcc_1v8_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "avcc_1v8_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "vcc_1v8_s0"; + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avdd_1v2_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1200000>; + regulator-min-microvolt = <1200000>; + regulator-name = "avdd_1v2_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "vcc_3v3_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; + regulator-name = "vccio_sd_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3_pldo6: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "vcc_1v8_s3_pldo6"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <750000>; + regulator-min-microvolt = <750000>; + regulator-name = "vdd_0v75_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <850000>; + regulator-min-microvolt = <850000>; + regulator-name = "vdd_ddr_pll_s0"; + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + avdd_0v75_s0: nldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <837500>; + regulator-min-microvolt = <837500>; + regulator-name = "avdd_0v75_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_0v85_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&tsadc { + status = "okay"; +}; + +&u2phy0 { + status = "okay"; +}; + +&u2phy0_otg { + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +&uart9 { + pinctrl-0 = <&uart9m2_xfer>, <&uart9m2_ctsn>, <&uart9m2_rtsn>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4345c5"; + clocks = <&rtc_hym8563>; + clock-names = "lpo"; + device-wakeup-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio3>; + interrupts = <RK_PB0 IRQ_TYPE_EDGE_FALLING>; + pinctrl-0 = <&bt_enable_h>, <&bt_host_wake_l>, <&bt_wake_l>; + pinctrl-names = "default"; + shutdown-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-odroid-m2.dts b/arch/arm64/boot/dts/rockchip/rk3588s-odroid-m2.dts new file mode 100644 index 000000000000..63d91236ba9f --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588s-odroid-m2.dts @@ -0,0 +1,903 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/usb/pd.h> +#include "rk3588s.dtsi" + +/ { + model = "Hardkernel ODROID-M2"; + compatible = "hardkernel,odroid-m2", "rockchip,rk3588s"; + + aliases { + ethernet0 = &gmac1; + mmc0 = &sdhci; + mmc1 = &sdmmc; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_led>, <&sys_led>; + + led_pwr: led-0 { + color = <LED_COLOR_ID_RED>; + default-state = "on"; + function = LED_FUNCTION_POWER; + gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led_sys: led-1 { + color = <LED_COLOR_ID_BLUE>; + default-state = "on"; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + fan: pwm-fan { + compatible = "pwm-fan"; + #cooling-cells = <2>; + cooling-levels = <0 192 224 255>; + fan-supply = <&vcc5v0_sys>; + pwms = <&pwm0 0 22222 0>; + }; + + vcc_1v1_nldo_s3: regulator-1v1-vcc-nldo-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc4v0_sys>; + }; + + vcc3v3_lcd: regulator-3v3-vcc-lcd { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pwren>; + regulator-name = "vcc3v3_lcd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3_s3>; + }; + + vcc3v3_pcie: regulator-3v3-vcc-pcie { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pwren>; + regulator-name = "vcc3v3_pcie"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3_s3>; + }; + + vcc_3v3_s0: regulator-3v3-vcc-s0 { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3_s3>; + }; + + vcc4v0_sys: regulator-4v0-vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc4v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <4800000>; + regulator-max-microvolt = <4800000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_sys: regulator-5v0-vcc-sys { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_pwren>; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_usb2_host: regulator-5v0-vcc-usb2-host { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb2_host_pwren>; + regulator-name = "vcc5v0_usb2_host"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_usb3_host: regulator-5v0-vcc-usb3-host { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_host_pwren>; + regulator-name = "vcc5v0_usb3_host"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_usb3_typec: regulator-5v0-vcc-usb3-typec { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_typec_pwren>; + regulator-name = "vcc5v0_usb3_typec"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcca: regulator-5v0-vcca { + compatible = "regulator-fixed"; + regulator-name = "vcca"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc12v_dcin: regulator-12v0-vcc-dcin { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&combphy2_psu { + status = "okay"; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&gmac1 { + clock_in_out = "output"; + phy-handle = <&rgmii_phy1>; + phy-mode = "rgmii-id"; + phy-supply = <&vcc_3v3_s0>; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1_miim + &gmac1_tx_bus2 + &gmac1_rx_bus2 + &gmac1_rgmii_clk + &gmac1_rgmii_bus + &gmac1_clkinout>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu_s0>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0m2_xfer>; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc4v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc4v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c2 { + status = "okay"; + + vdd_npu_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_npu_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc4v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c8 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c8m2_xfer>; + status = "okay"; + + usbc0: usb-typec@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio4>; + interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&usbc0_int>; + vbus-supply = <&vcc5v0_usb3_typec>; + + connector { + compatible = "usb-c-connector"; + data-role = "dual"; + label = "USB-C"; + op-sink-microwatt = <1000000>; + power-role = "dual"; + sink-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>; + source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; + try-power-role = "source"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usbc0_role_switch: endpoint { + remote-endpoint = <&usb_host0_xhci_role_switch>; + }; + }; + + port@1 { + reg = <1>; + + usbc0_orientation_switch: endpoint { + remote-endpoint = <&usbdp_phy0_orientation_switch>; + }; + }; + + port@2 { + reg = <2>; + + usbc0_dp_altmode_mux: endpoint { + remote-endpoint = <&usbdp_phy0_dp_altmode_mux>; + }; + }; + }; + }; + }; + + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pcf8563_int>; + wakeup-source; + }; +}; + +&mdio1 { + rgmii_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id001c.c916"; + reg = <1>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + }; +}; + +&package_thermal { + polling-delay = <1000>; + + trips { + package_fan0: package-fan0 { + hysteresis = <2000>; + temperature = <60000>; + type = "active"; + }; + }; + + cooling-maps { + map0 { + cooling-device = <&fan 1 THERMAL_NO_LIMIT>; + trip = <&package_fan0>; + }; + }; +}; + +&pcie2x1l2 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie20x1_pins>; + reset-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&pinctrl { + lcd { + lcd_pwren: lcd-pwren { + rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + pwr_led: pwr-led { + rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + sys_led: sys-led { + rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie { + pcie20x1_pins: pcie20x1-pins { + rockchip,pins = + <1 RK_PA0 4 &pcfg_pull_none>, + <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>, + <1 RK_PA1 4 &pcfg_pull_none>; + }; + + pcie_pwren: pcie-pwren { + rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + regulator { + vcc5v0_pwren: vcc5v0-pwren { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + rtc { + pcf8563_int: pcf8563-int { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + usb2_host_pwren: usb2-host-pwren { + rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usb3_host_pwren: usb3-host-pwren { + rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usb3_typec_pwren: usb3-typec-pwren { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usbc0_int: usbc0-int { + rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0m2_pins>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca_1v8_s0>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + no-sd; + no-sdio; + non-removable; + vmmc-supply = <&vcc_3v3_s0>; + vqmmc-supply = <&vcc_1v8_s0>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + disable-wp; + max-frequency = <150000000>; + no-mmc; + no-sdio; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +&spi2 { + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0>, <&spi2m2_pins>; + status = "okay"; + + pmic@0 { + compatible = "rockchip,rk806"; + reg = <0x0>; + #gpio-cells = <2>; + gpio-controller; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + spi-max-frequency = <1000000>; + system-power-controller; + + vcc1-supply = <&vcc4v0_sys>; + vcc2-supply = <&vcc4v0_sys>; + vcc3-supply = <&vcc4v0_sys>; + vcc4-supply = <&vcc4v0_sys>; + vcc5-supply = <&vcc4v0_sys>; + vcc6-supply = <&vcc4v0_sys>; + vcc7-supply = <&vcc4v0_sys>; + vcc8-supply = <&vcc4v0_sys>; + vcc9-supply = <&vcc4v0_sys>; + vcc10-supply = <&vcc4v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc4v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcca>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: dcdc-reg1 { + regulator-name = "vdd_gpu_s0"; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: dcdc-reg2 { + regulator-name = "vdd_cpu_lit_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_logic_s0: dcdc-reg3 { + regulator-name = "vdd_logic_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: dcdc-reg4 { + regulator-name = "vdd_vdenc_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-name = "vdd_ddr_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-name = "vdd2_ddr_s3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-name = "vdd_2v0_pldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-name = "vcc_3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-name = "vddq_ddr_s0"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-name = "vcc_1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_1v8_s0: pldo-reg1 { + regulator-name = "vcc_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_1v8_s0: pldo-reg2 { + regulator-name = "vcca_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdda_1v2_s0: pldo-reg3 { + regulator-name = "vdda_1v2_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_3v3_s0: pldo-reg4 { + regulator-name = "vcca_3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-name = "vccio_sd_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3_pldo6: pldo-reg6 { + regulator-name = "vcc_1v8_s3_pldo6"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-name = "vdd_0v75_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdda_ddr_pll_s0: nldo-reg2 { + regulator-name = "vdda_ddr_pll_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdda_0v75_s0: nldo-reg3 { + regulator-name = "vdda_0v75_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <837500>; + regulator-max-microvolt = <837500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v85_s0: nldo-reg4 { + regulator-name = "vdda_0v85_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* Schematics show not in use */ + nldo-reg5 { + }; + }; + }; +}; + +&tsadc { + status = "okay"; +}; + +&u2phy0 { + status = "okay"; +}; + +&u2phy0_otg { + status = "okay"; +}; + +&u2phy2 { + status = "okay"; +}; + +&u2phy2_host { + phy-supply = <&vcc5v0_usb2_host>; + status = "okay"; +}; + +&u2phy3 { + status = "okay"; +}; + +&u2phy3_host { + phy-supply = <&vcc5v0_usb3_host>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host0_xhci { + usb-role-switch; + status = "okay"; + + port { + usb_host0_xhci_role_switch: endpoint { + remote-endpoint = <&usbc0_role_switch>; + }; + }; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host2_xhci { + status = "okay"; +}; + +&usbdp_phy0 { + mode-switch; + orientation-switch; + sbu1-dc-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_HIGH>; + sbu2-dc-gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_HIGH>; + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + usbdp_phy0_orientation_switch: endpoint@0 { + reg = <0>; + remote-endpoint = <&usbc0_orientation_switch>; + }; + + usbdp_phy0_dp_altmode_mux: endpoint@1 { + reg = <1>; + remote-endpoint = <&usbc0_dp_altmode_mux>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts index 03ed48246d36..294b99dd50da 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts @@ -65,6 +65,18 @@ regulator-max-microvolt = <12000000>; }; + vcc3v3_wf: vcc3v3-wf-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_wf"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&pow_en>; + pinctrl-names = "default"; + vin-supply = <&vcc5v0_sys>; + }; + vcc5v0_host: vcc5v0-host-regulator { compatible = "regulator-fixed"; regulator-name = "vcc5v0_host"; @@ -114,6 +126,10 @@ }; }; +&combphy0_ps { + status = "okay"; +}; + &combphy2_psu { status = "okay"; }; @@ -293,6 +309,14 @@ }; }; +&pcie2x1l2 { + pinctrl-0 = <&pcie20x1m0_pins>; + pinctrl-names = "default"; + reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_wf>; + status = "okay"; +}; + &pinctrl { leds { io_led: io-led { @@ -300,6 +324,12 @@ }; }; + pcie { + pow_en: pow-en { + rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + power { vcc_5v0_en: vcc-5v0-en { rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; @@ -317,28 +347,6 @@ rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; - - wifibt { - wl_reset: wl-reset { - rockchip,pins = <0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - wl_dis: wl-dis { - rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_output_high>; - }; - - wl_wake_host: wl-wake-host { - rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - bt_dis: bt-dis { - rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_output_high>; - }; - - bt_wake_host: bt-wake-host { - rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; }; &pwm3 { @@ -754,8 +762,6 @@ &usb_host0_ehci { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&wl_reset &wl_dis &wl_wake_host &bt_dis &bt_wake_host>; }; &usb_host0_ohci { diff --git a/arch/arm64/boot/dts/sprd/sc2731.dtsi b/arch/arm64/boot/dts/sprd/sc2731.dtsi index e15409f55f43..12136e68dada 100644 --- a/arch/arm64/boot/dts/sprd/sc2731.dtsi +++ b/arch/arm64/boot/dts/sprd/sc2731.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Spreadtrum SC2731 PMIC dts file * * Copyright (C) 2018, Spreadtrum Communications Inc. - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ &adi_bus { @@ -95,7 +94,7 @@ nvmem-cells = <&adc_big_scale>, <&adc_small_scale>; }; - fgu@a00 { + fuel-gauge@a00 { compatible = "sprd,sc2731-fgu"; reg = <0xa00>; bat-detect-gpio = <&pmic_eic 9 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/sprd/sc9836-openphone.dts b/arch/arm64/boot/dts/sprd/sc9836-openphone.dts index e5657c35cd10..b98589ea5ac2 100644 --- a/arch/arm64/boot/dts/sprd/sc9836-openphone.dts +++ b/arch/arm64/boot/dts/sprd/sc9836-openphone.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Spreadtrum SC9836 openphone board DTS file * * Copyright (C) 2014, Spreadtrum Communications Inc. - * - * This file is licensed under a dual GPLv2 or X11 license. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/sprd/sc9836.dtsi b/arch/arm64/boot/dts/sprd/sc9836.dtsi index 8bb8a70966d2..bc3fc9fc3d90 100644 --- a/arch/arm64/boot/dts/sprd/sc9836.dtsi +++ b/arch/arm64/boot/dts/sprd/sc9836.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Spreadtrum SC9836 SoC DTS file * * Copyright (C) 2014, Spreadtrum Communications Inc. - * - * This file is licensed under a dual GPLv2 or X11 license. */ #include "sharkl64.dtsi" diff --git a/arch/arm64/boot/dts/sprd/sc9860.dtsi b/arch/arm64/boot/dts/sprd/sc9860.dtsi index 31952d361a8a..d2456d633c39 100644 --- a/arch/arm64/boot/dts/sprd/sc9860.dtsi +++ b/arch/arm64/boot/dts/sprd/sc9860.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Spreadtrum SC9860 SoC * * Copyright (C) 2016, Spreadtrum Communications Inc. - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/arch/arm64/boot/dts/sprd/sc9863a.dtsi b/arch/arm64/boot/dts/sprd/sc9863a.dtsi index 53e5b77d70b5..e5a2857721e2 100644 --- a/arch/arm64/boot/dts/sprd/sc9863a.dtsi +++ b/arch/arm64/boot/dts/sprd/sc9863a.dtsi @@ -551,14 +551,14 @@ #size-cells = <2>; ranges; - sdio0: sdio@20300000 { + sdio0: mmc@20300000 { compatible = "sprd,sdhci-r11"; reg = <0 0x20300000 0 0x1000>; interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "sdio", "enable"; clocks = <&aon_clk CLK_SDIO0_2X>, <&apahb_gate CLK_SDIO0_EB>; + clock-names = "sdio", "enable"; assigned-clocks = <&aon_clk CLK_SDIO0_2X>; assigned-clock-parents = <&rpll CLK_RPLL_390M>; @@ -567,14 +567,14 @@ no-mmc; }; - sdio3: sdio@20600000 { + sdio3: mmc@20600000 { compatible = "sprd,sdhci-r11"; reg = <0 0x20600000 0 0x1000>; interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "sdio", "enable"; clocks = <&aon_clk CLK_EMMC_2X>, <&apahb_gate CLK_EMMC_EB>; + clock-names = "sdio", "enable"; assigned-clocks = <&aon_clk CLK_EMMC_2X>; assigned-clock-parents = <&rpll CLK_RPLL_390M>; diff --git a/arch/arm64/boot/dts/sprd/sharkl64.dtsi b/arch/arm64/boot/dts/sprd/sharkl64.dtsi index 69f64e7fce7c..bf58702c4e07 100644 --- a/arch/arm64/boot/dts/sprd/sharkl64.dtsi +++ b/arch/arm64/boot/dts/sprd/sharkl64.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Spreadtrum Sharkl64 platform DTS file * * Copyright (C) 2014, Spreadtrum Communications Inc. - * - * This file is licensed under a dual GPLv2 or X11 license. */ / { diff --git a/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts b/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts index 1ce3cbbd9668..095b24a31313 100644 --- a/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts +++ b/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Spreadtrum SP9860g board * * Copyright (C) 2017, Spreadtrum Communications Inc. - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; diff --git a/arch/arm64/boot/dts/sprd/ums512.dtsi b/arch/arm64/boot/dts/sprd/ums512.dtsi index 4c080df48724..efa14309cc4e 100644 --- a/arch/arm64/boot/dts/sprd/ums512.dtsi +++ b/arch/arm64/boot/dts/sprd/ums512.dtsi @@ -849,9 +849,9 @@ compatible = "sprd,sdhci-r11"; reg = <0x1100000 0x1000>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "sdio", "enable"; clocks = <&ap_clk CLK_SDIO0_2X>, <&apapb_gate CLK_SDIO0_EB>; + clock-names = "sdio", "enable"; assigned-clocks = <&ap_clk CLK_SDIO0_2X>; assigned-clock-parents = <&pll1 CLK_RPLL>; status = "disabled"; @@ -861,9 +861,9 @@ compatible = "sprd,sdhci-r11"; reg = <0x1400000 0x1000>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "sdio", "enable"; clocks = <&ap_clk CLK_EMMC_2X>, <&apapb_gate CLK_EMMC_EB>; + clock-names = "sdio", "enable"; assigned-clocks = <&ap_clk CLK_EMMC_2X>; assigned-clock-parents = <&pll1 CLK_RPLL>; status = "disabled"; diff --git a/arch/arm64/boot/dts/sprd/whale2.dtsi b/arch/arm64/boot/dts/sprd/whale2.dtsi index 7068bfd2f4c3..a551e14ce826 100644 --- a/arch/arm64/boot/dts/sprd/whale2.dtsi +++ b/arch/arm64/boot/dts/sprd/whale2.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Spreadtrum Whale2 platform peripherals * * Copyright (C) 2016, Spreadtrum Communications Inc. - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ #include <dt-bindings/clock/sprd,sc9860-clk.h> @@ -75,9 +74,10 @@ "sprd,sc9836-uart"; reg = <0x0 0x100>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "enable", "uart", "source"; clocks = <&apapb_gate CLK_UART0_EB>, - <&ap_clk CLK_UART0>, <&ext_26m>; + <&ap_clk CLK_UART0>, + <&ext_26m>; + clock-names = "enable", "uart", "source"; status = "disabled"; }; @@ -86,9 +86,10 @@ "sprd,sc9836-uart"; reg = <0x100000 0x100>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "enable", "uart", "source"; clocks = <&apapb_gate CLK_UART1_EB>, - <&ap_clk CLK_UART1>, <&ext_26m>; + <&ap_clk CLK_UART1>, + <&ext_26m>; + clock-names = "enable", "uart", "source"; status = "disabled"; }; @@ -97,9 +98,10 @@ "sprd,sc9836-uart"; reg = <0x200000 0x100>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "enable", "uart", "source"; clocks = <&apapb_gate CLK_UART2_EB>, - <&ap_clk CLK_UART2>, <&ext_26m>; + <&ap_clk CLK_UART2>, + <&ext_26m>; + clock-names = "enable", "uart", "source"; status = "disabled"; }; @@ -108,9 +110,10 @@ "sprd,sc9836-uart"; reg = <0x300000 0x100>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "enable", "uart", "source"; clocks = <&apapb_gate CLK_UART3_EB>, - <&ap_clk CLK_UART3>, <&ext_26m>; + <&ap_clk CLK_UART3>, + <&ext_26m>; + clock-names = "enable", "uart", "source"; status = "disabled"; }; }; @@ -129,19 +132,19 @@ /* For backwards compatibility: */ #dma-channels = <32>; dma-channels = <32>; - clock-names = "enable"; clocks = <&apahb_gate CLK_DMA_EB>; + clock-names = "enable"; }; - sdio3: sdio@50430000 { + sdio3: mmc@50430000 { compatible = "sprd,sdhci-r11"; reg = <0 0x50430000 0 0x1000>; interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "sdio", "enable", "2x_enable"; clocks = <&aon_prediv CLK_EMMC_2X>, - <&apahb_gate CLK_EMMC_EB>, - <&aon_gate CLK_EMMC_2X_EN>; + <&apahb_gate CLK_EMMC_EB>, + <&aon_gate CLK_EMMC_2X_EN>; + clock-names = "sdio", "enable", "2x_enable"; assigned-clocks = <&aon_prediv CLK_EMMC_2X>; assigned-clock-parents = <&clk_l0_409m6>; @@ -194,8 +197,8 @@ compatible = "sprd,hwspinlock-r3p0"; reg = <0 0x40500000 0 0x1000>; #hwlock-cells = <1>; - clock-names = "enable"; clocks = <&aon_gate CLK_SPLK_EB>; + clock-names = "enable"; }; eic_debounce: gpio@40210000 { @@ -258,9 +261,9 @@ reg = <0 0x40310000 0 0x1000>; interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; timeout-sec = <12>; - clock-names = "enable", "rtc_enable"; clocks = <&aon_gate CLK_APCPU_WDG_EB>, - <&aon_gate CLK_AP_WDG_RTC_EB>; + <&aon_gate CLK_AP_WDG_RTC_EB>; + clock-names = "enable", "rtc_enable"; }; }; @@ -277,9 +280,9 @@ /* For backwards compatibility: */ #dma-channels = <32>; dma-channels = <32>; - clock-names = "enable", "ashb_eb"; clocks = <&agcp_gate CLK_AGCP_DMAAP_EB>, - <&agcp_gate CLK_AGCP_AP_ASHB_EB>; + <&agcp_gate CLK_AGCP_AP_ASHB_EB>; + clock-names = "enable", "ashb_eb"; }; }; }; diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index e20b27ddf901..bcd392c3206e 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -73,10 +73,16 @@ k3-am654-gp-evm-dtbs := k3-am654-base-board.dtb \ k3-am654-pcie-usb3.dtbo k3-am654-evm-dtbs := k3-am654-base-board.dtb k3-am654-icssg2.dtbo k3-am654-idk-dtbs := k3-am654-evm.dtb k3-am654-idk.dtbo k3-am654-pcie-usb2.dtbo +k3-am6548-iot2050-advanced-m2-bkey-ekey-pcie-dtbs := k3-am6548-iot2050-advanced-m2.dtb \ + k3-am6548-iot2050-advanced-m2-bkey-ekey-pcie.dtbo +k3-am6548-iot2050-advanced-m2-bkey-usb3-dtbs := k3-am6548-iot2050-advanced-m2.dtb \ + k3-am6548-iot2050-advanced-m2-bkey-usb3.dtbo dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic.dtb dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic-pg2.dtb dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced.dtb dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-m2.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-m2-bkey-ekey-pcie.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-m2-bkey-usb3.dtb dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-pg2.dtb dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-sm.dtb dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb @@ -110,6 +116,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm.dtb dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-pcie1-ep.dtbo # Boards with J722s SoC +dtb-$(CONFIG_ARCH_K3) += k3-am67a-beagley-ai.dtb dtb-$(CONFIG_ARCH_K3) += k3-j722s-evm.dtb # Boards with J784s4 SoC diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi index 328929c740dc..5b92aef5b284 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi @@ -241,6 +241,7 @@ bootph-pre-ram; compatible = "ti,j721e-esm"; reg = <0x00 0x420000 0x00 0x1000>; + /* Interrupt sources: rti0, rti1, rti15, wrti0, rti2, rti3 */ ti,esm-pins = <160>, <161>, <162>, <163>, <177>, <178>; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi index e66d486ef1f2..bb43a411f59b 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi @@ -19,6 +19,7 @@ bootph-pre-ram; compatible = "ti,j721e-esm"; reg = <0x00 0x4100000 0x00 0x1000>; + /* Interrupt sources: esm0_cfg, esm0_hi, esm0_low, mrti0 */ ti,esm-pins = <0>, <1>, <2>, <85>; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi index 12ba833002a1..3c6a80aebd9f 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi @@ -12,12 +12,29 @@ thermal_zones: thermal-zones { thermal-sensors = <&wkup_vtm0 0>; trips { + main0_alert: main0-alert { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + main0_crit: main0-crit { temperature = <105000>; /* milliCelsius */ hysteresis = <2000>; /* milliCelsius */ type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&main0_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; main1_thermal: main1-thermal { @@ -26,11 +43,28 @@ thermal_zones: thermal-zones { thermal-sensors = <&wkup_vtm0 1>; trips { + main1_alert: main1-alert { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + main1_crit: main1-crit { temperature = <105000>; /* milliCelsius */ hysteresis = <2000>; /* milliCelsius */ type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&main1_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am625.dtsi b/arch/arm64/boot/dts/ti/k3-am625.dtsi index 4014add6320d..c3d1db47dc9f 100644 --- a/arch/arm64/boot/dts/ti/k3-am625.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am625.dtsi @@ -50,6 +50,7 @@ next-level-cache = <&L2_0>; operating-points-v2 = <&a53_opp_table>; clocks = <&k3_clks 135 0>; + #cooling-cells = <2>; }; cpu1: cpu@1 { @@ -66,6 +67,7 @@ next-level-cache = <&L2_0>; operating-points-v2 = <&a53_opp_table>; clocks = <&k3_clks 136 0>; + #cooling-cells = <2>; }; cpu2: cpu@2 { @@ -82,6 +84,7 @@ next-level-cache = <&L2_0>; operating-points-v2 = <&a53_opp_table>; clocks = <&k3_clks 137 0>; + #cooling-cells = <2>; }; cpu3: cpu@3 { @@ -98,6 +101,7 @@ next-level-cache = <&L2_0>; operating-points-v2 = <&a53_opp_table>; clocks = <&k3_clks 138 0>; + #cooling-cells = <2>; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi index 916fcf3cc57d..16a578ae2b41 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi @@ -265,6 +265,14 @@ pinctrl-single,function-mask = <0xffffffff>; }; + main_esm: esm@420000 { + compatible = "ti,j721e-esm"; + reg = <0x0 0x420000 0x0 0x1000>; + bootph-pre-ram; + /* Interrupt sources: rti0, rti1, wrti0, rti4, rti2, rti3 */ + ti,esm-pins = <192>, <193>, <195>, <204>, <209>, <210>; + }; + main_timer0: timer@2400000 { compatible = "ti,am654-timer"; reg = <0x00 0x2400000 0x00 0x400>; @@ -1088,4 +1096,14 @@ clocks = <&k3_clks 204 2>; power-domains = <&k3_pds 204 TI_SCI_PD_EXCLUSIVE>; }; + + e5010: jpeg-encoder@fd20000 { + compatible = "ti,am62a-jpeg-enc", "img,e5010-jpeg-enc"; + reg = <0x00 0xfd20000 0x00 0x100>, + <0x00 0xfd20200 0x00 0x200>; + reg-names = "core", "mmu"; + clocks = <&k3_clks 201 0>; + power-domains = <&k3_pds 201 TI_SCI_PD_EXCLUSIVE>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi index 8c36e56f4138..0469c766b769 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi @@ -15,6 +15,14 @@ status = "disabled"; }; + mcu_esm: esm@4100000 { + compatible = "ti,j721e-esm"; + reg = <0x0 0x4100000 0x0 0x1000>; + bootph-pre-ram; + /* Interrupt sources: esm0_cfg, esm0_hi, esm0_low, mrti0 */ + ti,esm-pins = <0>, <1>, <2>, <85>; + }; + /* * The MCU domain timer interrupts are routed only to the ESM module, * and not currently available for Linux. The MCU domain timers are diff --git a/arch/arm64/boot/dts/ti/k3-am62a.dtsi b/arch/arm64/boot/dts/ti/k3-am62a.dtsi index b1b884600293..4d79b3e9486a 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a.dtsi @@ -61,6 +61,8 @@ <0x00 0x08000000 0x00 0x08000000 0x00 0x00200000>, /* Main CPSW */ <0x00 0x0e000000 0x00 0x0e000000 0x00 0x01d20000>, /* Second peripheral window */ <0x00 0x0fd00000 0x00 0x0fd00000 0x00 0x00020000>, /* GPU */ + <0x00 0x0fd20000 0x00 0x0fd20000 0x00 0x00000100>, /* JPEGENC0_CORE */ + <0x00 0x0fd20200 0x00 0x0fd20200 0x00 0x00000200>, /* JPEGENC0_CORE_MMU */ <0x00 0x20000000 0x00 0x20000000 0x00 0x0a008000>, /* Third peripheral window */ <0x00 0x30040000 0x00 0x30040000 0x00 0x00080000>, /* PRUSS-M */ <0x00 0x30101000 0x00 0x30101000 0x00 0x00010100>, /* CSI window */ diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi index 9701fc69aed9..9b6f51379108 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi @@ -260,8 +260,9 @@ main_esm: esm@420000 { compatible = "ti,j721e-esm"; reg = <0x00 0x420000 0x00 0x1000>; - ti,esm-pins = <160>, <161>, <162>, <163>, <177>, <178>; bootph-pre-ram; + /* Interrupt sources: rti0, rti1, wrti0 rti2, rti3, rti15 */ + ti,esm-pins = <224>, <225>, <227>, <241>, <242>, <248>; }; main_timer0: timer@2400000 { diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi index df7945156397..b33aff0d65c9 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi @@ -26,9 +26,9 @@ mcu_esm: esm@4100000 { compatible = "ti,j721e-esm"; reg = <0x00 0x4100000 0x00 0x1000>; - ti,esm-pins = <0>, <1>, <2>, <85>; - status = "reserved"; bootph-pre-ram; + /* Interrupt sources: esm0_cfg, esm0_hi, esm0_low, mrti0, wrti0 */ + ti,esm-pins = <0>, <1>, <2>, <85>, <86>; }; /* diff --git a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi index 0ce9721b4176..420c77c8e9e5 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi @@ -65,5 +65,6 @@ &main_gpio1 { gpio-ranges = <&main_pmx0 0 94 32>, <&main_pmx0 42 137 5>, <&main_pmx0 47 143 3>, <&main_pmx0 50 149 2>; + gpio-reserved-ranges = <32 10>; ti,ngpio = <52>; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts index ff65955551a3..3efa12bb7254 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts @@ -645,8 +645,6 @@ wkup_uart0_pins_default: wkup-uart0-default-pins { pinctrl-single,pins = < - AM62PX_MCU_IOPAD(0x02c, PIN_INPUT, 0) /* (C7) WKUP_UART0_CTSn */ - AM62PX_MCU_IOPAD(0x030, PIN_OUTPUT, 0) /* (C6) WKUP_UART0_RTSn */ AM62PX_MCU_IOPAD(0x024, PIN_INPUT, 0) /* (D8) WKUP_UART0_RXD */ AM62PX_MCU_IOPAD(0x028, PIN_OUTPUT, 0) /* (D7) WKUP_UART0_TXD */ >; diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi index f8370dd03350..7eae18399caa 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi @@ -389,7 +389,8 @@ bootph-pre-ram; compatible = "ti,j721e-esm"; reg = <0x00 0x420000 0x00 0x1000>; - ti,esm-pins = <160>, <161>; + /* Interrupt sources: rti0, rti1, rti8, rti9, rti10, rti11 */ + ti,esm-pins = <160>, <161>, <162>, <163>, <164>, <165>; }; main_uart0: serial@2800000 { @@ -677,6 +678,7 @@ assigned-clock-parents = <&k3_clks 13 9>; clock-names = "fck"; power-domains = <&k3_pds 13 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; dmas = <&main_pktdma 0xC500 15>, <&main_pktdma 0xC501 15>, @@ -701,6 +703,7 @@ phys = <&phy_gmii_sel 1>; mac-address = [00 00 00 00 00 00]; ti,syscon-efuse = <&main_conf 0x200>; + status = "disabled"; }; cpsw_port2: port@2 { @@ -709,6 +712,7 @@ label = "port2"; phys = <&phy_gmii_sel 2>; mac-address = [00 00 00 00 00 00]; + status = "disabled"; }; }; @@ -759,7 +763,7 @@ }; usbss0: cdns-usb@f900000 { - compatible = "ti,am64-usb"; + compatible = "ti,am64-usb", "ti,j721e-usb"; reg = <0x00 0xf900000 0x00 0x100>; power-domains = <&k3_pds 161 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 161 9>, <&k3_clks 161 1>; diff --git a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi index ec17285869da..ad4bed5d3f9e 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi @@ -158,6 +158,7 @@ bootph-pre-ram; compatible = "ti,j721e-esm"; reg = <0x00 0x4100000 0x00 0x1000>; - ti,esm-pins = <0>, <1>; + /* Interrupt sources: esm0_cfg, esm0_hi, esm0_low, mrti0 */ + ti,esm-pins = <0>, <1>, <2>, <85>; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi index ea7c58fb67e2..6bece2fb4e95 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi @@ -185,6 +185,7 @@ &cpsw3g { pinctrl-names = "default"; pinctrl-0 = <&cpsw_rgmii1_pins_default>; + status = "okay"; }; &cpsw3g_mdio { @@ -208,10 +209,7 @@ &cpsw_port1 { phy-mode = "rgmii-rxid"; phy-handle = <&cpsw3g_phy1>; -}; - -&cpsw_port2 { - status = "disabled"; + status = "okay"; }; &mailbox0_cluster2 { diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtso b/arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtso index f08c0e272b53..92faf762894c 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtso +++ b/arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtso @@ -12,7 +12,7 @@ #include "k3-pinctrl.h" &main_pmx0 { - gpmc0_pins_default: gpmc0-pins-default { + gpmc0_default_pins: gpmc0-default-pins { bootph-all; pinctrl-single,pins = < AM64X_IOPAD(0x0094, PIN_INPUT, 7) /* (T19) GPMC0_BE1n.GPIO0_36 */ @@ -50,7 +50,7 @@ }; &main_gpio0 { - gpio0-36 { + gpmc0-hog { bootph-all; gpio-hog; gpios = <36 0>; @@ -67,7 +67,7 @@ &gpmc0 { status = "okay"; pinctrl-names = "default"; - pinctrl-0 = <&gpmc0_pins_default>; + pinctrl-0 = <&gpmc0_default_pins>; #address-cells = <2>; #size-cells = <1>; diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts index 6bb1ad2e56ec..97ca16f00cd2 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts @@ -616,17 +616,20 @@ bootph-all; pinctrl-names = "default"; pinctrl-0 = <&rgmii1_pins_default>, <&rgmii2_pins_default>; + status = "okay"; }; &cpsw_port1 { bootph-all; phy-mode = "rgmii-rxid"; phy-handle = <&cpsw3g_phy0>; + status = "okay"; }; &cpsw_port2 { phy-mode = "rgmii-rxid"; phy-handle = <&cpsw3g_phy3>; + status = "okay"; }; &cpsw3g_mdio { @@ -646,6 +649,10 @@ &tscadc0 { /* ADC is reserved for R5 usage */ status = "reserved"; + + adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; + }; }; &ospi0 { diff --git a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts index 30729b49dd69..60285d736e07 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts @@ -28,6 +28,8 @@ model = "PHYTEC phyBOARD-Electra-AM64x RDK"; aliases { + ethernet1 = &icssg0_emac0; + ethernet2 = &icssg0_emac1; mmc1 = &sdhci1; serial2 = &main_uart0; serial3 = &main_uart1; @@ -55,6 +57,73 @@ standby-gpios = <&main_gpio0 35 GPIO_ACTIVE_HIGH>; }; + /* Dual Ethernet application node on PRU-ICSSG0 */ + ethernet { + compatible = "ti,am642-icssg-prueth"; + pinctrl-names = "default"; + pinctrl-0 = <&icssg0_rgmii1_pins_default>, <&icssg0_rgmii2_pins_default>; + + interrupt-parent = <&icssg0_intc>; + interrupts = <24 0 2>, <25 1 3>; + interrupt-names = "tx_ts0", "tx_ts1"; + + sram = <&oc_sram>; + firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf", + "ti-pruss/am65x-sr2-rtu0-prueth-fw.elf", + "ti-pruss/am65x-sr2-txpru0-prueth-fw.elf", + "ti-pruss/am65x-sr2-pru1-prueth-fw.elf", + "ti-pruss/am65x-sr2-rtu1-prueth-fw.elf", + "ti-pruss/am65x-sr2-txpru1-prueth-fw.elf"; + + dmas = <&main_pktdma 0xc100 15>, /* egress slice 0 */ + <&main_pktdma 0xc101 15>, /* egress slice 0 */ + <&main_pktdma 0xc102 15>, /* egress slice 0 */ + <&main_pktdma 0xc103 15>, /* egress slice 0 */ + <&main_pktdma 0xc104 15>, /* egress slice 1 */ + <&main_pktdma 0xc105 15>, /* egress slice 1 */ + <&main_pktdma 0xc106 15>, /* egress slice 1 */ + <&main_pktdma 0xc107 15>, /* egress slice 1 */ + <&main_pktdma 0x4100 15>, /* ingress slice 0 */ + <&main_pktdma 0x4101 15>; /* ingress slice 1 */ + dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3", + "tx1-0", "tx1-1", "tx1-2", "tx1-3", + "rx0", "rx1"; + + ti,prus = <&pru0_0>, <&rtu0_0>, <&tx_pru0_0>, <&pru0_1>, <&rtu0_1>, <&tx_pru0_1>; + ti,pruss-gp-mux-sel = <2>, /* MII mode */ + <2>, + <2>, + <2>, /* MII mode */ + <2>, + <2>; + + ti,mii-g-rt = <&icssg0_mii_g_rt>; + ti,mii-rt = <&icssg0_mii_rt>; + ti,iep = <&icssg0_iep0>, <&icssg0_iep1>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + icssg0_emac0: port@0 { + reg = <0>; + phy-handle = <&icssg0_phy1>; + phy-mode = "rgmii-id"; + /* Filled in by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + ti,syscon-rgmii-delay = <&main_conf 0x4100>; + }; + + icssg0_emac1: port@1 { + reg = <1>; + phy-handle = <&icssg0_phy2>; + phy-mode = "rgmii-id"; + /* Filled in by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + ti,syscon-rgmii-delay = <&main_conf 0x4104>; + }; + }; + }; + keys { compatible = "gpio-keys"; autorepeat; @@ -118,6 +187,12 @@ >; }; + clkout0_pins_default: clkout0-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x0274, PIN_OUTPUT, 5) /* (A19) EXT_REFCLK1.CLKOUT0 */ + >; + }; + gpio_keys_pins_default: gpio-keys-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0044, PIN_INPUT, 7) /* (T18) GPMC0_AD2.GPIO0_17 */ @@ -125,6 +200,49 @@ >; }; + icssg0_mdio_pins_default: icssg0-mdio-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x0200, PIN_INPUT, 0) /* (P2) PRG0_MDIO0_MDIO */ + AM64X_IOPAD(0x0204, PIN_OUTPUT, 0) /* (P3) PRG0_MDIO0_MDC */ + AM64X_IOPAD(0x01A8, PIN_OUTPUT, 7) /* (V1) PRG0_PRU0_GPO18.GPIO1_18 */ + AM64X_IOPAD(0x01AC, PIN_OUTPUT, 7) /* (W1) PRG0_PRU0_GPO19.GPIO1_19 */ + >; + }; + + icssg0_rgmii1_pins_default: icssg0-rgmii1-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x0160, PIN_INPUT, 2) /* (Y1) PRG0_PRU0_GPO0.PRG0_RGMII1_RD0 */ + AM64X_IOPAD(0x0164, PIN_INPUT, 2) /* (R4) PRG0_PRU0_GPO1.PRG0_RGMII1_RD1 */ + AM64X_IOPAD(0x0168, PIN_INPUT, 2) /* (U2) PRG0_PRU0_GPO2.PRG0_RGMII1_RD2 */ + AM64X_IOPAD(0x016c, PIN_INPUT, 2) /* (V2) PRG0_PRU0_GPO3.PRG0_RGMII1_RD3 */ + AM64X_IOPAD(0x0170, PIN_INPUT, 2) /* (AA2) PRG0_PRU0_GPO4.PRG0_RGMII1_RX_CTL */ + AM64X_IOPAD(0x0178, PIN_INPUT, 2) /* (T3) PRG0_PRU0_GPO6.PRG0_RGMII1_RXC */ + AM64X_IOPAD(0x018c, PIN_OUTPUT, 2) /* (Y3) PRG0_PRU0_GPO11.PRG0_RGMII1_TD0 */ + AM64X_IOPAD(0x0190, PIN_OUTPUT, 2) /* (AA3) PRG0_PRU0_GPO12.PRG0_RGMII1_TD1 */ + AM64X_IOPAD(0x0194, PIN_OUTPUT, 2) /* (R6) PRG0_PRU0_GPO13.PRG0_RGMII1_TD2 */ + AM64X_IOPAD(0x0198, PIN_OUTPUT, 2) /* (V4) PRG0_PRU0_GPO14.PRG0_RGMII1_TD3 */ + AM64X_IOPAD(0x019c, PIN_OUTPUT, 2) /* (T5) PRG0_PRU0_GPO15.PRG0_RGMII1_TX_CTL */ + AM64X_IOPAD(0x01a0, PIN_OUTPUT, 2) /* (U4) PRG0_PRU0_GPO16.PRG0_RGMII1_TXC */ + >; + }; + + icssg0_rgmii2_pins_default: icssg0-rgmii2-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x01b0, PIN_INPUT, 2) /* (Y2) PRG0_PRU1_GPO0.PRG0_RGMII2_RD0 */ + AM64X_IOPAD(0x01b4, PIN_INPUT, 2) /* (W2) PRG0_PRU1_GPO1.PRG0_RGMII2_RD1 */ + AM64X_IOPAD(0x01b8, PIN_INPUT, 2) /* (V3) PRG0_PRU1_GPO2.PRG0_RGMII2_RD2 */ + AM64X_IOPAD(0x01bc, PIN_INPUT, 2) /* (T4) PRG0_PRU1_GPO3.PRG0_RGMII2_RD3 */ + AM64X_IOPAD(0x01c0, PIN_INPUT, 2) /* (W3) PRG0_PRU1_GPO4.PRG0_RGMII2_RX_CTL */ + AM64X_IOPAD(0x01c8, PIN_INPUT, 2) /* (R5) PRG0_PRU1_GPO6.PRG0_RGMII2_RXC */ + AM64X_IOPAD(0x01dc, PIN_OUTPUT, 2) /* (W4) PRG0_PRU1_GPO11.PRG0_RGMII2_TD0 */ + AM64X_IOPAD(0x01e0, PIN_OUTPUT, 2) /* (Y4) PRG0_PRU1_GPO12.PRG0_RGMII2_TD1 */ + AM64X_IOPAD(0x01e4, PIN_OUTPUT, 2) /* (T6) PRG0_PRU1_GPO13.PRG0_RGMII2_TD2 */ + AM64X_IOPAD(0x01e8, PIN_OUTPUT, 2) /* (U6) PRG0_PRU1_GPO14.PRG0_RGMII2_TD3 */ + AM64X_IOPAD(0x01ec, PIN_OUTPUT, 2) /* (U5) PRG0_PRU1_GPO15.PRG0_RGMII2_TX_CTL */ + AM64X_IOPAD(0x01f0, PIN_OUTPUT, 2) /* (AA4) PRG0_PRU1_GPO16.PRG0_RGMII2_TXC */ + >; + }; + main_i2c1_pins_default: main-i2c1-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0268, PIN_INPUT, 0) /* (C18) I2C1_SCL */ @@ -198,6 +316,34 @@ }; }; +&icssg0_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&icssg0_mdio_pins_default &clkout0_pins_default>; + status = "okay"; + + icssg0_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22"; + reg = <0x1>; + tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + reset-gpios = <&main_gpio1 18 GPIO_ACTIVE_LOW>; + reset-assert-us = <1000>; + reset-deassert-us = <1000>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + }; + + icssg0_phy2: ethernet-phy@2 { + compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22"; + reg = <0x2>; + tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + reset-gpios = <&main_gpio1 19 GPIO_ACTIVE_LOW>; + reset-assert-us = <1000>; + reset-deassert-us = <1000>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + }; +}; + &main_i2c1 { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts index 44ecbcf1c844..86369525259c 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts @@ -527,16 +527,19 @@ &cpsw3g { pinctrl-names = "default"; pinctrl-0 = <&rgmii1_pins_default>, <&rgmii2_pins_default>; + status = "okay"; }; &cpsw_port1 { phy-mode = "rgmii-rxid"; phy-handle = <&cpsw3g_phy0>; + status = "okay"; }; &cpsw_port2 { phy-mode = "rgmii-rxid"; phy-handle = <&cpsw3g_phy1>; + status = "okay"; }; &cpsw3g_mdio { diff --git a/arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi b/arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi index c19d0b8bbf0f..a5cec9a07510 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi @@ -177,6 +177,7 @@ &cpsw3g { pinctrl-names = "default"; pinctrl-0 = <&rgmii1_default_pins>; + status = "okay"; }; &cpsw3g_mdio { @@ -210,10 +211,7 @@ &cpsw_port1 { phy-mode = "rgmii-id"; phy-handle = <ðernet_phy0>; -}; - -&cpsw_port2 { - status = "disabled"; + status = "okay"; }; &icssg1_mdio { diff --git a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts index c40ad67cee01..e06a3b178b34 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts @@ -24,6 +24,8 @@ aliases { ethernet0 = &cpsw_port1; + ethernet1 = &icssg1_emac0; + ethernet2 = &icssg1_emac1; i2c1 = &mcu_i2c0; mmc1 = &sdhci1; serial0 = &mcu_uart0; @@ -71,6 +73,66 @@ }; }; + icssg1_eth: icssg1-eth { + compatible = "ti,am642-icssg-prueth"; + pinctrl-names = "default"; + pinctrl-0 = <&pru_icssg1_rgmii1_pins>, <&pru_icssg1_rgmii2_pins>; + interrupt-parent = <&icssg1_intc>; + interrupts = <24 0 2>, <25 1 3>; + interrupt-names = "tx_ts0", "tx_ts1"; + dmas = <&main_pktdma 0xc200 15>, /* egress slice 0 */ + <&main_pktdma 0xc201 15>, /* egress slice 0 */ + <&main_pktdma 0xc202 15>, /* egress slice 0 */ + <&main_pktdma 0xc203 15>, /* egress slice 0 */ + <&main_pktdma 0xc204 15>, /* egress slice 1 */ + <&main_pktdma 0xc205 15>, /* egress slice 1 */ + <&main_pktdma 0xc206 15>, /* egress slice 1 */ + <&main_pktdma 0xc207 15>, /* egress slice 1 */ + <&main_pktdma 0x4200 15>, /* ingress slice 0 */ + <&main_pktdma 0x4201 15>; /* ingress slice 1 */ + dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3", + "tx1-0", "tx1-1", "tx1-2", "tx1-3", + "rx0", "rx1"; + sram = <&oc_sram>; + firmware-name = "ti-pruss/am64x-sr2-pru0-prueth-fw.elf", + "ti-pruss/am64x-sr2-rtu0-prueth-fw.elf", + "ti-pruss/am64x-sr2-txpru0-prueth-fw.elf", + "ti-pruss/am64x-sr2-pru1-prueth-fw.elf", + "ti-pruss/am64x-sr2-rtu1-prueth-fw.elf", + "ti-pruss/am64x-sr2-txpru1-prueth-fw.elf"; + ti,prus = <&pru1_0>, <&rtu1_0>, <&tx_pru1_0>, <&pru1_1>, <&rtu1_1>, <&tx_pru1_1>; + ti,pruss-gp-mux-sel = <2>, /* MII mode */ + <2>, + <2>, + <2>, /* MII mode */ + <2>, + <2>; + ti,mii-g-rt = <&icssg1_mii_g_rt>; + ti,mii-rt = <&icssg1_mii_rt>; + ti,iep = <&icssg1_iep0>, <&icssg1_iep1>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + icssg1_emac0: port@0 { + reg = <0>; + phy-handle = <&icssg1_phy0c>; + phy-mode = "rgmii-id"; + /* Filled in by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + }; + + icssg1_emac1: port@1 { + reg = <1>; + phy-handle = <&icssg1_phy03>; + phy-mode = "rgmii-id"; + /* Filled in by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + }; + }; + }; + fan0: pwm-fan { compatible = "pwm-fan"; pinctrl-names = "default"; @@ -119,15 +181,13 @@ &cpsw3g { pinctrl-names = "default"; pinctrl-0 = <&cpsw_pins>; + status = "okay"; }; &cpsw_port1 { phy-mode = "rgmii-rxid"; phy-handle = <&cpsw3g_phy0>; -}; - -&cpsw_port2 { - status = "disabled"; + status = "okay"; }; &cpsw3g_mdio { @@ -154,6 +214,42 @@ status = "okay"; }; +&icssg1_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&pru_icssg1_mdio_pins>; + status = "okay"; + + /* phy-mode is fixed up to rgmii-rxid by prueth driver to account for + * the SoC integration, so the only rx-internal-delay and no + * tx-internal-delay is set for the PHYs. + */ + + icssg1_phy03: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x3>; + reset-gpios = <&main_gpio1 47 GPIO_ACTIVE_LOW>; + reset-assert-us = <1000>; + reset-deassert-us = <1000>; + ti,rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; + + icssg1_phy0c: ethernet-phy@c { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0xc>; + reset-gpios = <&main_gpio1 51 GPIO_ACTIVE_LOW>; + reset-assert-us = <1000>; + reset-deassert-us = <1000>; + ti,rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; +}; + + &main_gpio0 { pinctrl-names = "default"; pinctrl-0 = <&main_gpio0_digital_pins>, diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi index e2584a5efe34..b3c4c0eec3dc 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi @@ -9,11 +9,6 @@ * Common bits of the IOT2050 Basic and Advanced variants, PG2 */ -&mcu_r5fss0 { - /* lock-step mode not supported on PG2 boards */ - ti,cluster-mode = <0>; -}; - &main_pmx0 { cp2102n_reset_pin_default: cp2102n-reset-default-pins { pinctrl-single,pins = < diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi index ef34b851e178..e5136ed94765 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi @@ -627,11 +627,62 @@ reg = <0>; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_SPEED_LAN; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_YELLOW>; + function = LED_FUNCTION_SPEED_LAN; + }; + }; }; icssg0_eth1_phy: ethernet-phy@1 { reg = <1>; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_SPEED_LAN; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_YELLOW>; + function = LED_FUNCTION_SPEED_LAN; + }; + }; }; }; + +&mcu_r5fss0 { + /* lock-step mode not supported on iot2050 boards */ + ti,cluster-mode = <0>; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index 1af3dedde1f6..1f1af7ea2330 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -54,6 +54,14 @@ }; }; + main_esm: esm@700000 { + compatible = "ti,j721e-esm"; + reg = <0x00 0x700000 0x00 0x1000>; + bootph-pre-ram; + /* Interrupt sources: rti0, rti1, rti2, rti3 */ + ti,esm-pins = <224>, <225>, <226>, <227>; + }; + serdes0: serdes@900000 { compatible = "ti,phy-am654-serdes"; reg = <0x0 0x900000 0x0 0x2000>; @@ -478,7 +486,7 @@ ranges = <0x0 0x0 0x00100000 0x1c000>; serdes0_clk: clock@4080 { - compatible = "ti,am654-serdes-ctrl", "syscon"; + compatible = "ti,am654-serdes-ctrl", "syscon", "simple-mfd"; reg = <0x4080 0x4>; serdes0_mux: mux-controller { @@ -489,7 +497,7 @@ }; serdes1_clk: clock@4090 { - compatible = "ti,am654-serdes-ctrl", "syscon"; + compatible = "ti,am654-serdes-ctrl", "syscon", "simple-mfd"; reg = <0x4090 0x4>; serdes1_mux: mux-controller { diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi index 43c6118d2bf0..7cf1f646500a 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi @@ -292,13 +292,13 @@ ranges = <0x0 0x47000000 0x0 0x47000000 0x0 0x100>, /* FSS Control */ <0x0 0x47040000 0x0 0x47040000 0x0 0x100>, /* OSPI0 Control */ <0x0 0x47050000 0x0 0x47050000 0x0 0x100>, /* OSPI1 Control */ - <0x5 0x00000000 0x5 0x00000000 0x1 0x0000000>, /* OSPI0 Memory */ - <0x7 0x00000000 0x7 0x00000000 0x1 0x0000000>; /* OSPI1 Memory */ + <0x0 0x50000000 0x0 0x50000000 0x0 0x10000000>, /* FSS data region 1 */ + <0x4 0x00000000 0x4 0x00000000 0x4 0x00000000>; /* FSS data region 0/3 */ ospi0: spi@47040000 { compatible = "ti,am654-ospi", "cdns,qspi-nor"; reg = <0x0 0x47040000 0x0 0x100>, - <0x5 0x00000000 0x1 0x0000000>; + <0x5 0x00000000 0x1 0x00000000>; interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>; cdns,fifo-depth = <256>; cdns,fifo-width = <4>; @@ -316,7 +316,7 @@ ospi1: spi@47050000 { compatible = "ti,am654-ospi", "cdns,qspi-nor"; reg = <0x0 0x47050000 0x0 0x100>, - <0x7 0x00000000 0x1 0x00000000>; + <0x7 0x00000000 0x1 0x00000000>; interrupts = <GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>; cdns,fifo-depth = <256>; cdns,fifo-width = <4>; @@ -440,6 +440,14 @@ }; }; + mcu_esm: esm@40800000 { + compatible = "ti,j721e-esm"; + reg = <0x00 0x40800000 0x00 0x1000>; + bootph-pre-ram; + /* Interrupt sources: mrti0, mrti1 */ + ti,esm-pins = <104>, <105>; + }; + mcu_rti1: watchdog@40610000 { compatible = "ti,j7-rti-wdt"; reg = <0x0 0x40610000 0x0 0x100>; diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi index c59baebc5a25..c74a0a25832c 100644 --- a/arch/arm64/boot/dts/ti/k3-am65.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi @@ -69,11 +69,10 @@ <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, - <0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>, + <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A53 PERIPHBASE */ - <0x00 0x70000000 0x00 0x70000000 0x00 0x200000>, - <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>, - <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>; + <0x00 0x70000000 0x00 0x70000000 0x00 0x00200000>, + <0x04 0x00000000 0x04 0x00000000 0x04 0x00000000>; cbass_mcu: bus@28380000 { compatible = "simple-bus"; @@ -89,9 +88,8 @@ <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */ <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */ <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI space 1 */ - <0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>, /* FSS OSPI0 data region 1 */ - <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>, /* FSS OSPI0 data region 3*/ - <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>; /* FSS OSPI1 data region 3*/ + <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS data region 1 */ + <0x04 0x00000000 0x04 0x00000000 0x04 0x00000000>; /* FSS data region 0/3 */ cbass_wakeup: bus@42040000 { compatible = "simple-bus"; diff --git a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts index 29a31891b3db..4968a47f31ea 100644 --- a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts +++ b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts @@ -22,8 +22,3 @@ compatible = "siemens,iot2050-basic", "ti,am654"; model = "SIMATIC IOT2050 Basic"; }; - -&mcu_r5fss0 { - /* lock-step mode not supported on this board */ - ti,cluster-mode = <0>; -}; diff --git a/arch/arm64/boot/dts/ti/k3-am654-idk.dtso b/arch/arm64/boot/dts/ti/k3-am654-idk.dtso index 8bdb87fcbde0..b0ce2cb2fdc8 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-idk.dtso +++ b/arch/arm64/boot/dts/ti/k3-am654-idk.dtso @@ -8,6 +8,7 @@ /dts-v1/; /plugin/; +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/net/ti-dp83867.h> #include "k3-pinctrl.h" @@ -58,9 +59,7 @@ <&main_udmap 0xc107>, /* egress slice 1 */ <&main_udmap 0x4100>, /* ingress slice 0 */ - <&main_udmap 0x4101>, /* ingress slice 1 */ - <&main_udmap 0x4102>, /* mgmnt rsp slice 0 */ - <&main_udmap 0x4103>; /* mgmnt rsp slice 1 */ + <&main_udmap 0x4101>; /* ingress slice 1 */ dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3", "tx1-0", "tx1-1", "tx1-2", "tx1-3", "rx0", "rx1"; @@ -126,9 +125,7 @@ <&main_udmap 0xc207>, /* egress slice 1 */ <&main_udmap 0x4200>, /* ingress slice 0 */ - <&main_udmap 0x4201>, /* ingress slice 1 */ - <&main_udmap 0x4202>, /* mgmnt rsp slice 0 */ - <&main_udmap 0x4203>; /* mgmnt rsp slice 1 */ + <&main_udmap 0x4201>; /* ingress slice 1 */ dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3", "tx1-0", "tx1-1", "tx1-2", "tx1-3", "rx0", "rx1"; @@ -154,6 +151,24 @@ }; }; }; + + transceiver1: can-phy0 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&mcan0_gpio_pins_default>; + standby-gpios = <&main_gpio1 47 GPIO_ACTIVE_LOW>; + }; + + transceiver2: can-phy1 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&mcan1_gpio_pins_default>; + standby-gpios = <&main_gpio1 67 GPIO_ACTIVE_LOW>; + }; }; &main_pmx0 { @@ -243,6 +258,34 @@ AM65X_IOPAD(0x012c, PIN_INPUT, 2) /* (AG26) PRG1_PRU0_GPO19.PRG1_IEP0_EDC_SYNC_OUT0 */ >; }; + + mcan0_gpio_pins_default: mcan0-gpio-default-pins { + pinctrl-single,pins = < + AM65X_IOPAD(0x023c, PIN_INPUT, 7) /* (V25) PRG0_PRU0_GPIO18:GPIO1_47 */ + >; + }; + + mcan1_gpio_pins_default: mcan1-gpio-default-pins { + pinctrl-single,pins = < + AM65X_IOPAD(0x028c, PIN_INPUT, 7) /* (Y26) PRG0_PRU1_GPIO18.GPIO1_67 */ + >; + }; +}; + +&wkup_pmx0 { + mcu_mcan0_pins_default: mcu-mcan0-default-pins { + pinctrl-single,pins = < + AM65X_WKUP_IOPAD(0x00ac, PIN_INPUT_PULLUP, 0) /* (W2) MCU_MCAN0_RX */ + AM65X_WKUP_IOPAD(0x00a8, PIN_OUTPUT_PULLUP, 0) /* (W1) MCU_MCAN0_TX */ + >; + }; + + mcu_mcan1_pins_default: mcu-mcan1-default-pins { + pinctrl-single,pins = < + AM65X_WKUP_IOPAD(0x00c4, PIN_INPUT_PULLUP, 1) /* (AD3) WKUP_GPIO0_5.MCU_MCAN1_RX */ + AM65X_WKUP_IOPAD(0x00c0, PIN_OUTPUT_PULLUP, 1) /* (AC3) WKUP_GPIO0_4.MCU_MCAN1_TX */ + >; + }; }; &icssg0_mdio { @@ -294,3 +337,17 @@ pinctrl-names = "default"; pinctrl-0 = <&icssg1_iep0_pins_default>; }; + +&m_can0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan0_pins_default>; + phys = <&transceiver1>; + status = "okay"; +}; + +&m_can1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan1_pins_default>; + phys = <&transceiver2>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2-bkey-ekey-pcie.dtso b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2-bkey-ekey-pcie.dtso new file mode 100644 index 000000000000..666237f6d79c --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2-bkey-ekey-pcie.dtso @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * IOT2050 M.2 variant, overlay for B-key PCIE0_LANE0 + E-key PCIE1_LANE0 + * Copyright (c) Siemens AG, 2022-2024 + * + * Authors: + * Chao Zeng <chao.zeng@siemens.com> + * Jan Kiszka <jan.kiszka@siemens.com> + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/gpio/gpio.h> + +&pcie0_rc { + num-lanes = <1>; + phys = <&serdes0 PHY_TYPE_PCIE 1>; + phy-names = "pcie-phy0"; + reset-gpios = <&main_gpio1 15 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pcie1_rc { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2-bkey-usb3.dtso b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2-bkey-usb3.dtso new file mode 100644 index 000000000000..0f86235c9771 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2-bkey-usb3.dtso @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * IOT2050 M.2 variant, overlay for B-key USB3.0 + E-key PCIE1_LANE0 + * Copyright (c) Siemens AG, 2022-2024 + * + * Authors: + * Chao Zeng <chao.zeng@siemens.com> + * Jan Kiszka <jan.kiszka@siemens.com> + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/gpio/gpio.h> + +&serdes0 { + assigned-clock-parents = <&k3_clks 153 7>, <&k3_clks 153 4>; +}; + +&pcie0_rc { + status = "disabled"; +}; + +&pcie1_rc { + pinctrl-names = "default"; + pinctrl-0 = <&minipcie_pins_default>; + + num-lanes = <1>; + phys = <&serdes1 PHY_TYPE_PCIE 0>; + phy-names = "pcie-phy0"; + reset-gpios = <&wkup_gpio0 27 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&dwc3_0 { + assigned-clock-parents = <&k3_clks 151 4>, /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */ + <&k3_clks 151 8>; /* set PIPE3_TXB_CLK to WIZ8B2M4VSB */ + phys = <&serdes0 PHY_TYPE_USB3 0>; + phy-names = "usb3-phy"; +}; + +&usb0 { + maximum-speed = "super-speed"; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts b/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts new file mode 100644 index 000000000000..44dfbdf89277 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts @@ -0,0 +1,393 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * https://beagley-ai.org/ + * + * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2024 Robert Nelson, BeagleBoard.org Foundation + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include <dt-bindings/net/ti-dp83867.h> +#include "k3-j722s.dtsi" + +/ { + compatible = "beagle,am67a-beagley-ai", "ti,j722s"; + model = "BeagleBoard.org BeagleY-AI"; + + aliases { + serial0 = &wkup_uart0; + serial2 = &main_uart0; + mmc1 = &sdhci1; + rtc0 = &rtc; + }; + + chosen { + stdout-path = &main_uart0; + }; + + memory@80000000 { + /* 4G RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x80000000>, + <0x00000008 0x80000000 0x00000000 0x80000000>; + device_type = "memory"; + bootph-pre-ram; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secure_tfa_ddr: tfa@9e780000 { + reg = <0x00 0x9e780000 0x00 0x80000>; + no-map; + }; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; + no-map; + }; + + wkup_r5fss0_core0_memory_region: r5f-memory@a0100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0100000 0x00 0xf00000>; + no-map; + }; + }; + + vsys_5v0: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "vsys_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + bootph-all; + }; + + vdd_3v3: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vsys_5v0>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_mmc1: regulator-3 { + compatible = "regulator-fixed"; + regulator-name = "vdd_mmc1"; + pinctrl-names = "default"; + pinctrl-0 = <&vdd_3v3_sd_pins_default>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpio = <&main_gpio1 50 GPIO_ACTIVE_HIGH>; + bootph-all; + }; + + vdd_sd_dv: regulator-4 { + compatible = "regulator-gpio"; + regulator-name = "tlv71033"; + pinctrl-names = "default"; + pinctrl-0 = <&vdd_sd_dv_pins_default>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + vin-supply = <&vsys_5v0>; + gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>; + states = <1800000 0x0>, + <3300000 0x1>; + bootph-all; + }; + + vsys_io_1v8: regulator-5 { + compatible = "regulator-fixed"; + regulator-name = "vsys_io_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vsys_io_1v2: regulator-6 { + compatible = "regulator-fixed"; + regulator-name = "vsys_io_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_default>; + + led-0 { + gpios = <&main_gpio0 11 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-1 { + gpios = <&main_gpio0 12 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + function = LED_FUNCTION_HEARTBEAT; + default-state = "on"; + }; + }; +}; + +&main_pmx0 { + main_i2c0_pins_default: main-i2c0-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (D23) I2C0_SCL */ + J722S_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (B22) I2C0_SDA */ + >; + bootph-all; + }; + + main_uart0_pins_default: main-uart0-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x01c8, PIN_INPUT, 0) /* (A22) UART0_RXD */ + J722S_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (B22) UART0_TXD */ + >; + bootph-all; + }; + + vdd_sd_dv_pins_default: vdd-sd-dv-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x0244, PIN_OUTPUT, 7) /* (A24) MMC1_SDWP.GPIO1_49 */ + >; + bootph-all; + }; + + main_mmc1_pins_default: main-mmc1-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x023c, PIN_INPUT, 0) /* (H22) MMC1_CMD */ + J722S_IOPAD(0x0234, PIN_OUTPUT, 0) /* (H24) MMC1_CLK */ + J722S_IOPAD(0x0230, PIN_INPUT, 0) /* (H23) MMC1_DAT0 */ + J722S_IOPAD(0x022c, PIN_INPUT_PULLUP, 0) /* (H20) MMC1_DAT1 */ + J722S_IOPAD(0x0228, PIN_INPUT_PULLUP, 0) /* (J23) MMC1_DAT2 */ + J722S_IOPAD(0x0224, PIN_INPUT_PULLUP, 0) /* (H25) MMC1_DAT3 */ + J722S_IOPAD(0x0240, PIN_INPUT, 7) /* (B24) MMC1_SDCD.GPIO1_48 */ + >; + bootph-all; + }; + + mdio_pins_default: mdio-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x0160, PIN_OUTPUT, 0) /* (AC24) MDIO0_MDC */ + J722S_IOPAD(0x015c, PIN_INPUT, 0) /* (AD25) MDIO0_MDIO */ + >; + }; + + rgmii1_pins_default: rgmii1-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x014c, PIN_INPUT, 0) /* (AC25) RGMII1_RD0 */ + J722S_IOPAD(0x0150, PIN_INPUT, 0) /* (AD27) RGMII1_RD1 */ + J722S_IOPAD(0x0154, PIN_INPUT, 0) /* (AE24) RGMII1_RD2 */ + J722S_IOPAD(0x0158, PIN_INPUT, 0) /* (AE26) RGMII1_RD3 */ + J722S_IOPAD(0x0148, PIN_INPUT, 0) /* (AE27) RGMII1_RXC */ + J722S_IOPAD(0x0144, PIN_INPUT, 0) /* (AD23) RGMII1_RX_CTL */ + J722S_IOPAD(0x0134, PIN_OUTPUT, 0) /* (AF27) RGMII1_TD0 */ + J722S_IOPAD(0x0138, PIN_OUTPUT, 0) /* (AE23) RGMII1_TD1 */ + J722S_IOPAD(0x013c, PIN_OUTPUT, 0) /* (AG25) RGMII1_TD2 */ + J722S_IOPAD(0x0140, PIN_OUTPUT, 0) /* (AF24) RGMII1_TD3 */ + J722S_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AG26) RGMII1_TXC */ + J722S_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AF25) RGMII1_TX_CTL */ + >; + }; + + led_pins_default: led-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x002c, PIN_OUTPUT, 7) /* (K26) OSPI0_CSn0.GPIO0_11 */ + J722S_IOPAD(0x0030, PIN_OUTPUT, 7) /* (K23) OSPI0_CSn1.GPIO0_12 */ + >; + }; + + pmic_irq_pins_default: pmic-irq-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x01f4, PIN_INPUT_PULLUP, 0) /* (B23) EXTINTn */ + >; + }; + + vdd_3v3_sd_pins_default: vdd-3v3-sd-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x0254, PIN_OUTPUT, 7) /* (E25) USB0_DRVVBUS.GPIO1_50 */ + >; + }; +}; + +&cpsw3g { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins_default>; + status = "okay"; +}; + +&cpsw3g_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins_default>; + status = "okay"; + + cpsw3g_phy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,min-output-impedance; + }; +}; + +&cpsw_port1 { + phy-mode = "rgmii-rxid"; + phy-handle = <&cpsw3g_phy0>; + status = "okay"; +}; + +&main_gpio1 { + status = "okay"; +}; + +&main_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart0_pins_default>; + bootph-all; + status = "okay"; +}; + +&mcu_pmx0 { + wkup_uart0_pins_default: wkup-uart0-default-pins { + pinctrl-single,pins = < + J722S_MCU_IOPAD(0x02c, PIN_INPUT, 0) /* (C7) WKUP_UART0_CTSn */ + J722S_MCU_IOPAD(0x030, PIN_OUTPUT, 0) /* (C6) WKUP_UART0_RTSn */ + J722S_MCU_IOPAD(0x024, PIN_INPUT, 0) /* (D8) WKUP_UART0_RXD */ + J722S_MCU_IOPAD(0x028, PIN_OUTPUT, 0) /* (D7) WKUP_UART0_TXD */ + >; + bootph-all; + }; + + wkup_i2c0_pins_default: wkup-i2c0-default-pins { + pinctrl-single,pins = < + J722S_MCU_IOPAD(0x04c, PIN_INPUT_PULLUP, 0) /* (C7) WKUP_I2C0_SCL */ + J722S_MCU_IOPAD(0x050, PIN_INPUT_PULLUP, 0) /* (C6) WKUP_I2C1_SDA */ + >; + bootph-all; + }; +}; + +&wkup_uart0 { + /* WKUP UART0 is used by Device Manager firmware */ + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; + bootph-all; + status = "reserved"; +}; + +&wkup_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&wkup_i2c0_pins_default>; + clock-frequency = <100000>; + bootph-all; + status = "okay"; + + tps65219: pmic@30 { + compatible = "ti,tps65219"; + reg = <0x30>; + buck1-supply = <&vsys_5v0>; + buck2-supply = <&vsys_5v0>; + buck3-supply = <&vsys_5v0>; + ldo1-supply = <&vdd_3v3>; + ldo3-supply = <&vdd_3v3>; + ldo4-supply = <&vdd_3v3>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + bootph-all; + system-power-controller; + ti,power-button; + + regulators { + buck1_reg: buck1 { + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + buck2_reg: buck2 { + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + regulator-name = "VDDSHV5_SDIO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-allow-bypass; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: ldo2 { + regulator-name = "VDD_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: ldo3 { + regulator-name = "VDDA_PHY_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: ldo4 { + regulator-name = "VDDA_PLL_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + }; + + rtc: rtc@68 { + compatible = "dallas,ds1340"; + reg = <0x68>; + }; +}; + +&sdhci1 { + /* SD/MMC */ + vmmc-supply = <&vdd_mmc1>; + vqmmc-supply = <&vdd_sd_dv>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc1_pins_default>; + disable-wp; + cd-gpios = <&main_gpio1 48 GPIO_ACTIVE_LOW>; + cd-debounce-delay-ms = <100>; + bootph-all; + ti,fails-without-test-cd; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts index 90dbe31c5b81..d5ceab79536c 100644 --- a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts @@ -204,6 +204,7 @@ pinctrl-single,pins = < J721S2_IOPAD(0x104, PIN_INPUT, 0) /* (P23) MMC1_CLK */ J721S2_IOPAD(0x108, PIN_INPUT, 0) /* (N24) MMC1_CMD */ + J721S2_IOPAD(0x100, PIN_INPUT, 0) /* (###) MMC1_CLKLB */ J721S2_IOPAD(0x0fc, PIN_INPUT, 0) /* (M23) MMC1_DAT0 */ J721S2_IOPAD(0x0f8, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */ J721S2_IOPAD(0x0f4, PIN_INPUT, 0) /* (R24) MMC1_DAT2 */ diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi b/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi index 5c66e0ec6e82..5bc0d2fb4b8f 100644 --- a/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi @@ -215,9 +215,9 @@ reg = <0x680000 0x40000>; }; - partition@740000 { + partition@6c0000 { label = "ospi.env.backup"; - reg = <0x740000 0x40000>; + reg = <0x6c0000 0x40000>; }; partition@800000 { @@ -302,6 +302,39 @@ <&mcu_r5fss0_core1_memory_region>; }; +&main_r5fss0 { + ti,cluster-mode = <0>; +}; + +&main_r5fss1 { + ti,cluster-mode = <0>; +}; + +/* Timers are used by Remoteproc firmware */ +&main_timer0 { + status = "reserved"; +}; + +&main_timer1 { + status = "reserved"; +}; + +&main_timer2 { + status = "reserved"; +}; + +&main_timer3 { + status = "reserved"; +}; + +&main_timer4 { + status = "reserved"; +}; + +&main_timer5 { + status = "reserved"; +}; + &main_r5fss0_core0 { mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>; memory-region = <&main_r5fss0_core0_dma_memory_region>, diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts index 3f655852244e..1e36965a1403 100644 --- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts @@ -979,6 +979,59 @@ <&mcu_r5fss0_core1_memory_region>; }; +&main_r5fss0 { + ti,cluster-mode = <0>; +}; + +&main_r5fss1 { + ti,cluster-mode = <0>; +}; + +/* Timers are used by Remoteproc firmware */ +&main_timer0 { + status = "reserved"; +}; + +&main_timer1 { + status = "reserved"; +}; + +&main_timer2 { + status = "reserved"; +}; + +&main_timer3 { + status = "reserved"; +}; + +&main_timer4 { + status = "reserved"; +}; + +&main_timer5 { + status = "reserved"; +}; + +&main_timer6 { + status = "reserved"; +}; + +&main_timer7 { + status = "reserved"; +}; + +&main_timer8 { + status = "reserved"; +}; + +&main_timer9 { + status = "reserved"; +}; + +&main_r5fss2 { + ti,cluster-mode = <0>; +}; + &main_r5fss0_core0 { mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>; memory-region = <&main_r5fss0_core0_dma_memory_region>, diff --git a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi index 21fe194a5766..e78b4622a7d1 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi @@ -84,13 +84,13 @@ }; }; - mux0: mux-controller { + mux0: mux-controller-0 { compatible = "gpio-mux"; #mux-state-cells = <1>; mux-gpios = <&exp_som 1 GPIO_ACTIVE_HIGH>; }; - mux1: mux-controller { + mux1: mux-controller-1 { compatible = "gpio-mux"; #mux-state-cells = <1>; mux-gpios = <&exp_som 2 GPIO_ACTIVE_HIGH>; @@ -262,6 +262,23 @@ <&mcu_r5fss0_core1_memory_region>; }; +&main_r5fss0 { + ti,cluster-mode = <0>; +}; + +/* Timers are used by Remoteproc firmware */ +&main_timer0 { + status = "reserved"; +}; + +&main_timer1 { + status = "reserved"; +}; + +&main_timer2 { + status = "reserved"; +}; + &main_r5fss0_core0 { mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>; memory-region = <&main_r5fss0_core0_dma_memory_region>, diff --git a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts index a2925555fe81..fb899c99753e 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts @@ -123,7 +123,7 @@ no-map; }; - c66_1_dma_memory_region: c66-dma-memory@a6000000 { + c66_0_dma_memory_region: c66-dma-memory@a6000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa6000000 0x00 0x100000>; no-map; @@ -135,7 +135,7 @@ no-map; }; - c66_0_dma_memory_region: c66-dma-memory@a7000000 { + c66_1_dma_memory_region: c66-dma-memory@a7000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa7000000 0x00 0x100000>; no-map; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi index 6b6ef6a30614..3731ffb4a5c9 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi @@ -354,8 +354,8 @@ <0x0 0x47034000 0x0 0x47034000 0x0 0x100>, /* HBMC Control */ <0x0 0x47040000 0x0 0x47040000 0x0 0x100>, /* OSPI0 Control */ <0x0 0x47050000 0x0 0x47050000 0x0 0x100>, /* OSPI1 Control */ - <0x5 0x00000000 0x5 0x00000000 0x1 0x0000000>, /* HBMC/OSPI0 Memory */ - <0x7 0x00000000 0x7 0x00000000 0x1 0x0000000>; /* OSPI1 Memory */ + <0x0 0x50000000 0x0 0x50000000 0x0 0x10000000>, /* FSS data region 1 */ + <0x4 0x00000000 0x4 0x00000000 0x4 0x00000000>; /* FSS data region 0/3 */ hbmc_mux: mux-controller@47000004 { compatible = "reg-mux"; @@ -367,7 +367,7 @@ hbmc: hyperbus@47034000 { compatible = "ti,am654-hbmc"; reg = <0x00 0x47034000 0x00 0x100>, - <0x05 0x00000000 0x01 0x0000000>; + <0x05 0x00000000 0x01 0x00000000>; power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 102 0>; assigned-clocks = <&k3_clks 102 5>; @@ -381,7 +381,7 @@ ospi0: spi@47040000 { compatible = "ti,am654-ospi", "cdns,qspi-nor"; reg = <0x0 0x47040000 0x0 0x100>, - <0x5 0x00000000 0x1 0x0000000>; + <0x5 0x00000000 0x1 0x00000000>; interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>; cdns,fifo-depth = <256>; cdns,fifo-width = <4>; @@ -399,7 +399,7 @@ ospi1: spi@47050000 { compatible = "ti,am654-ospi", "cdns,qspi-nor"; reg = <0x0 0x47050000 0x0 0x100>, - <0x7 0x00000000 0x1 0x00000000>; + <0x7 0x00000000 0x1 0x00000000>; interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>; cdns,fifo-depth = <256>; cdns,fifo-width = <4>; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts index 89fbfb21e5d3..6285e8d94dde 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts @@ -120,7 +120,7 @@ no-map; }; - c66_1_dma_memory_region: c66-dma-memory@a6000000 { + c66_0_dma_memory_region: c66-dma-memory@a6000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa6000000 0x00 0x100000>; no-map; @@ -132,7 +132,7 @@ no-map; }; - c66_0_dma_memory_region: c66-dma-memory@a7000000 { + c66_1_dma_memory_region: c66-dma-memory@a7000000 { compatible = "shared-dma-pool"; reg = <0x00 0xa7000000 0x00 0x100000>; no-map; @@ -1311,6 +1311,43 @@ <&mcu_r5fss0_core1_memory_region>; }; +&main_r5fss0 { + ti,cluster-mode = <0>; +}; + +&main_r5fss1 { + ti,cluster-mode = <0>; +}; + +/* Timers are used by Remoteproc firmware */ +&main_timer0 { + status = "reserved"; +}; + +&main_timer1 { + status = "reserved"; +}; + +&main_timer2 { + status = "reserved"; +}; + +&main_timer12 { + status = "reserved"; +}; + +&main_timer13 { + status = "reserved"; +}; + +&main_timer14 { + status = "reserved"; +}; + +&main_timer15 { + status = "reserved"; +}; + &main_r5fss0_core0 { mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>; memory-region = <&main_r5fss0_core0_dma_memory_region>, diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi index 5ba947771b84..cef47c67493f 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi @@ -561,6 +561,43 @@ <&mcu_r5fss0_core1_memory_region>; }; +&main_r5fss0 { + ti,cluster-mode = <0>; +}; + +&main_r5fss1 { + ti,cluster-mode = <0>; +}; + +/* Timers are used by Remoteproc firmware */ +&main_timer0 { + status = "reserved"; +}; + +&main_timer1 { + status = "reserved"; +}; + +&main_timer2 { + status = "reserved"; +}; + +&main_timer12 { + status = "reserved"; +}; + +&main_timer13 { + status = "reserved"; +}; + +&main_timer14 { + status = "reserved"; +}; + +&main_timer15 { + status = "reserved"; +}; + &main_r5fss0_core0 { mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>; memory-region = <&main_r5fss0_core0_dma_memory_region>, diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi index 5a72c518ceb6..a7f2f52f42f7 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi @@ -145,8 +145,7 @@ <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, - <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, - <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; + <0x04 0x00000000 0x04 0x00000000 0x04 0x00000000>; cbass_mcu_wakeup: bus@28380000 { compatible = "simple-bus"; @@ -162,9 +161,8 @@ <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */ <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */ <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */ - <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS OSPI0/1 data region 0 */ - <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS OSPI0 data region 3 */ - <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/ + <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS data region 1 */ + <0x04 0x00000000 0x04 0x00000000 0x04 0x00000000>; /* FSS data region 0/3 */ }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-evm-gesi-exp-board.dtso b/arch/arm64/boot/dts/ti/k3-j721s2-evm-gesi-exp-board.dtso index 1be28283c7d9..8583178fa1f3 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-evm-gesi-exp-board.dtso +++ b/arch/arm64/boot/dts/ti/k3-j721s2-evm-gesi-exp-board.dtso @@ -48,7 +48,7 @@ }; &exp1 { - p15 { + p15-hog { /* P15 - EXP_MUX2 */ gpio-hog; gpios = <13 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi index 8feb42c89e47..9d96b19d0e7c 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi @@ -622,8 +622,8 @@ #address-cells = <2>; #size-cells = <2>; ranges = <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, - <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, - <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; + <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, + <0x04 0x00000000 0x04 0x00000000 0x04 0x00000000>; ospi0: spi@47040000 { compatible = "ti,am654-ospi", "cdns,qspi-nor"; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi index 82aacc01e8fe..89252e4a5f1b 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi @@ -134,13 +134,13 @@ }; }; - mux0: mux-controller { + mux0: mux-controller-0 { compatible = "gpio-mux"; #mux-state-cells = <1>; mux-gpios = <&exp_som 1 GPIO_ACTIVE_HIGH>; }; - mux1: mux-controller { + mux1: mux-controller-1 { compatible = "gpio-mux"; #mux-state-cells = <1>; mux-gpios = <&exp_som 2 GPIO_ACTIVE_HIGH>; @@ -516,6 +516,39 @@ <&mcu_r5fss0_core1_memory_region>; }; +&main_r5fss0 { + ti,cluster-mode = <0>; +}; + +&main_r5fss1 { + ti,cluster-mode = <0>; +}; + +/* Timers are used by Remoteproc firmware */ +&main_timer0 { + status = "reserved"; +}; + +&main_timer1 { + status = "reserved"; +}; + +&main_timer2 { + status = "reserved"; +}; + +&main_timer3 { + status = "reserved"; +}; + +&main_timer4 { + status = "reserved"; +}; + +&main_timer5 { + status = "reserved"; +}; + &main_r5fss0_core0 { mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>; memory-region = <&main_r5fss0_core0_dma_memory_region>, diff --git a/arch/arm64/boot/dts/ti/k3-j721s2.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2.dtsi index 568e6a04619d..ea16f82822ae 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2.dtsi @@ -141,8 +141,7 @@ <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, - <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, - <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; + <0x04 0x00000000 0x04 0x00000000 0x04 0x00000000>; cbass_mcu_wakeup: bus@28380000 { compatible = "simple-bus"; @@ -158,9 +157,8 @@ <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */ <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */ <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */ - <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS OSPI0/1 data region 0 */ - <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS OSPI0 data region 3 */ - <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/ + <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS data region 1 */ + <0x04 0x00000000 0x04 0x00000000 0x04 0x00000000>; /* FSS data region 0/3 */ }; diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts index dd3b5f7039d7..a00f4a7d20d9 100644 --- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts @@ -20,6 +20,7 @@ aliases { serial0 = &wkup_uart0; serial2 = &main_uart0; + serial3 = &main_uart5; mmc0 = &sdhci0; mmc1 = &sdhci1; }; @@ -51,12 +52,71 @@ no-map; }; + wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0000000 0x00 0x100000>; + no-map; + }; + wkup_r5fss0_core0_memory_region: r5f-memory@a0100000 { compatible = "shared-dma-pool"; reg = <0x00 0xa0100000 0x00 0xf00000>; no-map; }; + mcu_r5fss0_core0_dma_memory_region: mcu-r5fss-dma-memory-region@a1000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1000000 0x00 0x100000>; + no-map; + }; + + mcu_r5fss0_core0_memory_region: mcu-r5fss-memory-region@a1100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss0_core0_dma_memory_region: main-r5fss-dma-memory-region@a2000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core0_memory_region: main-r5fss-memory-region@a2100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2100000 0x00 0xf00000>; + no-map; + }; + + c7x_0_dma_memory_region: c7x-dma-memory@a3000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3000000 0x00 0x100000>; + no-map; + }; + + c7x_0_memory_region: c7x-memory@a3100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3100000 0x00 0xf00000>; + no-map; + }; + + c7x_1_dma_memory_region: c7x-dma-memory@a4000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa4000000 0x00 0x100000>; + no-map; + }; + + c7x_1_memory_region: c7x-memory@a4100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa4100000 0x00 0xf00000>; + no-map; + }; + + rtos_ipc_memory_region: ipc-memories@a5000000 { + reg = <0x00 0xa5000000 0x00 0x1c00000>; + alignment = <0x1000>; + no-map; + }; }; vmain_pd: regulator-0 { @@ -162,10 +222,39 @@ clocks = <&audio_refclk1>; }; }; + + transceiver0: can-phy0 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan0_gpio_pins_default>; + standby-gpios = <&mcu_gpio0 12 GPIO_ACTIVE_HIGH>; + }; + + transceiver1: can-phy1 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + }; + + transceiver2: can-phy2 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + standby-gpios = <&exp1 17 GPIO_ACTIVE_HIGH>; + }; }; &main_pmx0 { + main_mcan0_pins_default: main-mcan0-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x1dc, PIN_INPUT, 0) /* (C22) MCAN0_RX */ + J722S_IOPAD(0x1d8, PIN_OUTPUT, 0) /*(D22) MCAN0_TX */ + >; + }; + main_i2c0_pins_default: main-i2c0-default-pins { pinctrl-single,pins = < J722S_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (D23) I2C0_SCL */ @@ -182,6 +271,13 @@ bootph-all; }; + main_uart5_pins_default: main-uart5-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x0108, PIN_INPUT, 3) /* (J27) UART5_RXD */ + J722S_IOPAD(0x010c, PIN_OUTPUT, 3) /* (H27) UART5_TXD */ + >; + }; + vdd_sd_dv_pins_default: vdd-sd-dv-default-pins { pinctrl-single,pins = < J722S_IOPAD(0x0120, PIN_INPUT, 7) /* (F27) MMC2_CMD.GPIO0_70 */ @@ -301,8 +397,35 @@ bootph-all; }; +&main_uart5 { + /* MAIN UART 5 is used by System firmware */ + pinctrl-names = "default"; + pinctrl-0 = <&main_uart5_pins_default>; + status = "reserved"; +}; + &mcu_pmx0 { + mcu_mcan0_pins_default: mcu-mcan0-default-pins { + pinctrl-single,pins = < + J722S_MCU_IOPAD(0x038, PIN_INPUT, 0) /* (D8) MCU_MCAN0_RX */ + J722S_MCU_IOPAD(0x034, PIN_OUTPUT, 0) /* (B2) MCU_MCAN0_TX */ + >; + }; + + mcu_mcan1_pins_default: mcu-mcan1-default-pins { + pinctrl-single,pins = < + J722S_MCU_IOPAD(0x040, PIN_INPUT, 0) /* (B1) MCU_MCAN1_RX */ + J722S_MCU_IOPAD(0x03C, PIN_OUTPUT, 0) /*(C1) MCU_MCAN1_TX */ + >; + }; + + mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-default-pins { + pinctrl-single,pins = < + J722S_MCU_IOPAD(0x0030, PIN_OUTPUT, 7) /* (C3) MCU_GPIO0_12 */ + >; + }; + wkup_uart0_pins_default: wkup-uart0-default-pins { pinctrl-single,pins = < J722S_MCU_IOPAD(0x02c, PIN_INPUT, 0) /* (C7) WKUP_UART0_CTSn */ @@ -494,6 +617,104 @@ bootph-all; }; +&mailbox0_cluster0 { + status = "okay"; + + mbox_wkup_r5_0: mbox-wkup-r5-0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; +}; + +&mailbox0_cluster1 { + status = "okay"; + + mbox_mcu_r5_0: mbox-mcu-r5-0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; +}; + +&mailbox0_cluster2 { + status = "okay"; + + mbox_c7x_0: mbox-c7x-0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; +}; + +&mailbox0_cluster3 { + status = "okay"; + + mbox_main_r5_0: mbox-main-r5-0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_c7x_1: mbox-c7x-1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +/* Timers are used by Remoteproc firmware */ +&main_timer0 { + status = "reserved"; +}; + +&main_timer1 { + status = "reserved"; +}; + +&main_timer2 { + status = "reserved"; +}; + +&wkup_r5fss0 { + status = "okay"; +}; + +&wkup_r5fss0_core0 { + mboxes = <&mailbox0_cluster0 &mbox_wkup_r5_0>; + memory-region = <&wkup_r5fss0_core0_dma_memory_region>, + <&wkup_r5fss0_core0_memory_region>; +}; + +&mcu_r5fss0 { + status = "okay"; +}; + +&mcu_r5fss0_core0 { + mboxes = <&mailbox0_cluster1 &mbox_mcu_r5_0>; + memory-region = <&mcu_r5fss0_core0_dma_memory_region>, + <&mcu_r5fss0_core0_memory_region>; +}; + +&main_r5fss0 { + status = "okay"; +}; + +&main_r5fss0_core0 { + mboxes = <&mailbox0_cluster3 &mbox_main_r5_0>; + memory-region = <&main_r5fss0_core0_dma_memory_region>, + <&main_r5fss0_core0_memory_region>; +}; + +&c7x_0 { + mboxes = <&mailbox0_cluster2 &mbox_c7x_0>; + memory-region = <&c7x_0_dma_memory_region>, + <&c7x_0_memory_region>; + status = "okay"; +}; + +&c7x_1 { + mboxes = <&mailbox0_cluster3 &mbox_c7x_1>; + memory-region = <&c7x_1_dma_memory_region>, + <&c7x_1_memory_region>; + status = "okay"; +}; + &serdes_ln_ctrl { idle-states = <J722S_SERDES0_LANE0_USB>, <J722S_SERDES1_LANE0_PCIE0_LANE0>; @@ -566,3 +787,28 @@ 0 0 0 0 >; }; + +&mcu_mcan0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan0_pins_default>; + phys = <&transceiver0>; + status = "okay"; +}; + +&mcu_mcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan1_pins_default>; + phys = <&transceiver1>; + status = "okay"; +}; + +&main_mcan0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan0_pins_default>; + phys = <&transceiver2>; + status = "okay"; +}; + +&mcu_gpio0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi index dde4bd5c6645..ed6f4ba08afc 100644 --- a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi @@ -153,6 +153,67 @@ dr_mode = "otg"; }; }; + + main_r5fss0: r5fss@78400000 { + compatible = "ti,am62-r5fss"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x78400000 0x00 0x78400000 0x8000>, + <0x78500000 0x00 0x78500000 0x8000>; + power-domains = <&k3_pds 261 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + + main_r5fss0_core0: r5f@78400000 { + compatible = "ti,am62-r5f"; + reg = <0x78400000 0x00008000>, + <0x78500000 0x00008000>; + reg-names = "atcm", "btcm"; + resets = <&k3_reset 262 1>; + firmware-name = "j722s-main-r5f0_0-fw"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <262>; + ti,sci-proc-ids = <0x04 0xff>; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + }; + + c7x_0: dsp@7e000000 { + compatible = "ti,am62a-c7xv-dsp"; + reg = <0x00 0x7e000000 0x00 0x00200000>; + reg-names = "l2sram"; + resets = <&k3_reset 208 1>; + firmware-name = "j722s-c71_0-fw"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <208>; + ti,sci-proc-ids = <0x30 0xff>; + status = "disabled"; + }; + + c7x_1: dsp@7e200000 { + compatible = "ti,am62a-c7xv-dsp"; + reg = <0x00 0x7e200000 0x00 0x00200000>; + reg-names = "l2sram"; + resets = <&k3_reset 268 1>; + firmware-name = "j722s-c71_1-fw"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <268>; + ti,sci-proc-ids = <0x31 0xff>; + status = "disabled"; + }; +}; + +/* MCU domain overrides */ + +&mcu_r5fss0_core0 { + firmware-name = "j722s-mcu-r5f0_0-fw"; +}; + +/* Wakeup domain overrides */ + +&wkup_r5fss0_core0 { + firmware-name = "j722s-wkup-r5f0_0-fw"; }; &main_conf { @@ -214,5 +275,6 @@ &main_gpio1 { gpio-ranges = <&main_pmx0 7 101 25>, <&main_pmx0 42 137 5>, <&main_pmx0 47 143 3>, <&main_pmx0 50 149 2>; + gpio-reserved-ranges = <0 7>, <32 10>; ti,ngpio = <73>; }; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts index ffa38f41679d..6695ebbcb4d0 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts @@ -1154,6 +1154,59 @@ <&mcu_r5fss0_core1_memory_region>; }; +&main_r5fss0 { + ti,cluster-mode = <0>; +}; + +&main_r5fss1 { + ti,cluster-mode = <0>; +}; + +&main_r5fss2 { + ti,cluster-mode = <0>; +}; + +/* Timers are used by Remoteproc firmware */ +&main_timer0 { + status = "reserved"; +}; + +&main_timer1 { + status = "reserved"; +}; + +&main_timer2 { + status = "reserved"; +}; + +&main_timer3 { + status = "reserved"; +}; + +&main_timer4 { + status = "reserved"; +}; + +&main_timer5 { + status = "reserved"; +}; + +&main_timer6 { + status = "reserved"; +}; + +&main_timer7 { + status = "reserved"; +}; + +&main_timer8 { + status = "reserved"; +}; + +&main_timer9 { + status = "reserved"; +}; + &main_r5fss0_core0 { status = "okay"; mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>; @@ -1407,10 +1460,11 @@ serdes1_pcie0_link: phy@0 { reg = <0>; - cdns,num-lanes = <2>; + cdns,num-lanes = <4>; #phy-cells = <0>; cdns,phy-type = <PHY_TYPE_PCIE>; - resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>; + resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>, + <&serdes_wiz1 3>, <&serdes_wiz1 4>; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi index d4ac1c9872a5..e73bb750b09a 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi @@ -2429,7 +2429,7 @@ watchdog0: watchdog@2200000 { compatible = "ti,j7-rti-wdt"; reg = <0x00 0x2200000 0x00 0x100>; - clocks = <&k3_clks 348 1>; + clocks = <&k3_clks 348 0>; power-domains = <&k3_pds 348 TI_SCI_PD_EXCLUSIVE>; assigned-clocks = <&k3_clks 348 0>; assigned-clock-parents = <&k3_clks 348 4>; @@ -2438,7 +2438,7 @@ watchdog1: watchdog@2210000 { compatible = "ti,j7-rti-wdt"; reg = <0x00 0x2210000 0x00 0x100>; - clocks = <&k3_clks 349 1>; + clocks = <&k3_clks 349 0>; power-domains = <&k3_pds 349 TI_SCI_PD_EXCLUSIVE>; assigned-clocks = <&k3_clks 349 0>; assigned-clock-parents = <&k3_clks 349 4>; @@ -2447,7 +2447,7 @@ watchdog2: watchdog@2220000 { compatible = "ti,j7-rti-wdt"; reg = <0x00 0x2220000 0x00 0x100>; - clocks = <&k3_clks 350 1>; + clocks = <&k3_clks 350 0>; power-domains = <&k3_pds 350 TI_SCI_PD_EXCLUSIVE>; assigned-clocks = <&k3_clks 350 0>; assigned-clock-parents = <&k3_clks 350 4>; @@ -2456,7 +2456,7 @@ watchdog3: watchdog@2230000 { compatible = "ti,j7-rti-wdt"; reg = <0x00 0x2230000 0x00 0x100>; - clocks = <&k3_clks 351 1>; + clocks = <&k3_clks 351 0>; power-domains = <&k3_pds 351 TI_SCI_PD_EXCLUSIVE>; assigned-clocks = <&k3_clks 351 0>; assigned-clock-parents = <&k3_clks 351 4>; @@ -2465,7 +2465,7 @@ watchdog4: watchdog@2240000 { compatible = "ti,j7-rti-wdt"; reg = <0x00 0x2240000 0x00 0x100>; - clocks = <&k3_clks 352 1>; + clocks = <&k3_clks 352 0>; power-domains = <&k3_pds 352 TI_SCI_PD_EXCLUSIVE>; assigned-clocks = <&k3_clks 352 0>; assigned-clock-parents = <&k3_clks 352 4>; @@ -2474,7 +2474,7 @@ watchdog5: watchdog@2250000 { compatible = "ti,j7-rti-wdt"; reg = <0x00 0x2250000 0x00 0x100>; - clocks = <&k3_clks 353 1>; + clocks = <&k3_clks 353 0>; power-domains = <&k3_pds 353 TI_SCI_PD_EXCLUSIVE>; assigned-clocks = <&k3_clks 353 0>; assigned-clock-parents = <&k3_clks 353 4>; @@ -2483,7 +2483,7 @@ watchdog6: watchdog@2260000 { compatible = "ti,j7-rti-wdt"; reg = <0x00 0x2260000 0x00 0x100>; - clocks = <&k3_clks 354 1>; + clocks = <&k3_clks 354 0>; power-domains = <&k3_pds 354 TI_SCI_PD_EXCLUSIVE>; assigned-clocks = <&k3_clks 354 0>; assigned-clock-parents = <&k3_clks 354 4>; @@ -2492,7 +2492,7 @@ watchdog7: watchdog@2270000 { compatible = "ti,j7-rti-wdt"; reg = <0x00 0x2270000 0x00 0x100>; - clocks = <&k3_clks 355 1>; + clocks = <&k3_clks 355 0>; power-domains = <&k3_pds 355 TI_SCI_PD_EXCLUSIVE>; assigned-clocks = <&k3_clks 355 0>; assigned-clock-parents = <&k3_clks 355 4>; @@ -2506,7 +2506,7 @@ watchdog8: watchdog@22f0000 { compatible = "ti,j7-rti-wdt"; reg = <0x00 0x22f0000 0x00 0x100>; - clocks = <&k3_clks 360 1>; + clocks = <&k3_clks 360 0>; power-domains = <&k3_pds 360 TI_SCI_PD_EXCLUSIVE>; assigned-clocks = <&k3_clks 360 0>; assigned-clock-parents = <&k3_clks 360 4>; @@ -2517,7 +2517,7 @@ watchdog9: watchdog@2300000 { compatible = "ti,j7-rti-wdt"; reg = <0x00 0x2300000 0x00 0x100>; - clocks = <&k3_clks 356 1>; + clocks = <&k3_clks 356 0>; power-domains = <&k3_pds 356 TI_SCI_PD_EXCLUSIVE>; assigned-clocks = <&k3_clks 356 0>; assigned-clock-parents = <&k3_clks 356 4>; @@ -2528,7 +2528,7 @@ watchdog10: watchdog@2310000 { compatible = "ti,j7-rti-wdt"; reg = <0x00 0x2310000 0x00 0x100>; - clocks = <&k3_clks 357 1>; + clocks = <&k3_clks 357 0>; power-domains = <&k3_pds 357 TI_SCI_PD_EXCLUSIVE>; assigned-clocks = <&k3_clks 357 0>; assigned-clock-parents = <&k3_clks 357 4>; @@ -2539,7 +2539,7 @@ watchdog11: watchdog@2320000 { compatible = "ti,j7-rti-wdt"; reg = <0x00 0x2320000 0x00 0x100>; - clocks = <&k3_clks 358 1>; + clocks = <&k3_clks 358 0>; power-domains = <&k3_pds 358 TI_SCI_PD_EXCLUSIVE>; assigned-clocks = <&k3_clks 358 0>; assigned-clock-parents = <&k3_clks 358 4>; @@ -2550,7 +2550,7 @@ watchdog12: watchdog@2330000 { compatible = "ti,j7-rti-wdt"; reg = <0x00 0x2330000 0x00 0x100>; - clocks = <&k3_clks 359 1>; + clocks = <&k3_clks 359 0>; power-domains = <&k3_pds 359 TI_SCI_PD_EXCLUSIVE>; assigned-clocks = <&k3_clks 359 0>; assigned-clock-parents = <&k3_clks 359 4>; @@ -2561,7 +2561,7 @@ watchdog13: watchdog@23c0000 { compatible = "ti,j7-rti-wdt"; reg = <0x00 0x23c0000 0x00 0x100>; - clocks = <&k3_clks 361 1>; + clocks = <&k3_clks 361 0>; power-domains = <&k3_pds 361 TI_SCI_PD_EXCLUSIVE>; assigned-clocks = <&k3_clks 361 0>; assigned-clock-parents = <&k3_clks 361 4>; @@ -2572,7 +2572,7 @@ watchdog14: watchdog@23d0000 { compatible = "ti,j7-rti-wdt"; reg = <0x00 0x23d0000 0x00 0x100>; - clocks = <&k3_clks 362 1>; + clocks = <&k3_clks 362 0>; power-domains = <&k3_pds 362 TI_SCI_PD_EXCLUSIVE>; assigned-clocks = <&k3_clks 362 0>; assigned-clock-parents = <&k3_clks 362 4>; @@ -2583,7 +2583,7 @@ watchdog15: watchdog@23e0000 { compatible = "ti,j7-rti-wdt"; reg = <0x00 0x23e0000 0x00 0x100>; - clocks = <&k3_clks 363 1>; + clocks = <&k3_clks 363 0>; power-domains = <&k3_pds 363 TI_SCI_PD_EXCLUSIVE>; assigned-clocks = <&k3_clks 363 0>; assigned-clock-parents = <&k3_clks 363 4>; @@ -2594,7 +2594,7 @@ watchdog16: watchdog@23f0000 { compatible = "ti,j7-rti-wdt"; reg = <0x00 0x23f0000 0x00 0x100>; - clocks = <&k3_clks 364 1>; + clocks = <&k3_clks 364 0>; power-domains = <&k3_pds 364 TI_SCI_PD_EXCLUSIVE>; assigned-clocks = <&k3_clks 364 0>; assigned-clock-parents = <&k3_clks 364 4>; @@ -2605,7 +2605,7 @@ watchdog17: watchdog@2540000 { compatible = "ti,j7-rti-wdt"; reg = <0x00 0x2540000 0x00 0x100>; - clocks = <&k3_clks 365 1>; + clocks = <&k3_clks 365 0>; power-domains = <&k3_pds 365 TI_SCI_PD_EXCLUSIVE>; assigned-clocks = <&k3_clks 365 0>; assigned-clock-parents = <&k3_clks 366 4>; @@ -2616,7 +2616,7 @@ watchdog18: watchdog@2550000 { compatible = "ti,j7-rti-wdt"; reg = <0x00 0x2550000 0x00 0x100>; - clocks = <&k3_clks 366 1>; + clocks = <&k3_clks 366 0>; power-domains = <&k3_pds 366 TI_SCI_PD_EXCLUSIVE>; assigned-clocks = <&k3_clks 366 0>; assigned-clock-parents = <&k3_clks 366 4>; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi index f3a6ed1c979d..f603380fc91c 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi @@ -678,16 +678,16 @@ compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; - ranges = <0x0 0x47000000 0x0 0x47000000 0x0 0x100>, /* FSS Control */ - <0x0 0x47040000 0x0 0x47040000 0x0 0x100>, /* OSPI0 Control */ - <0x0 0x47050000 0x0 0x47050000 0x0 0x100>, /* OSPI1 Control */ - <0x5 0x00000000 0x5 0x00000000 0x1 0x0000000>, /* OSPI0 Memory */ - <0x7 0x00000000 0x7 0x00000000 0x1 0x0000000>; /* OSPI1 Memory */ + ranges = <0x00 0x47000000 0x00 0x47000000 0x00 0x00000100>, /* FSS Control */ + <0x00 0x47040000 0x00 0x47040000 0x00 0x00000100>, /* OSPI0 Control */ + <0x00 0x47050000 0x00 0x47050000 0x00 0x00000100>, /* OSPI1 Control */ + <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS data region 1 */ + <0x04 0x00000000 0x04 0x00000000 0x04 0x00000000>; /* FSS data region 0/3 */ ospi0: spi@47040000 { compatible = "ti,am654-ospi", "cdns,qspi-nor"; reg = <0x00 0x47040000 0x00 0x100>, - <0x05 0x0000000 0x01 0x0000000>; + <0x05 0x00000000 0x01 0x00000000>; interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>; cdns,fifo-depth = <256>; cdns,fifo-width = <4>; @@ -705,7 +705,7 @@ ospi1: spi@47050000 { compatible = "ti,am654-ospi", "cdns,qspi-nor"; reg = <0x00 0x47050000 0x00 0x100>, - <0x07 0x0000000 0x01 0x0000000>; + <0x07 0x00000000 0x01 0x00000000>; interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>; cdns,fifo-depth = <256>; cdns,fifo-width = <4>; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4.dtsi index 73cc3c1fec08..5e84c6b4f5ad 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j784s4.dtsi @@ -271,8 +271,7 @@ <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, - <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, - <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; + <0x04 0x00000000 0x04 0x00000000 0x04 0x00000000>; cbass_mcu_wakeup: bus@28380000 { bootph-all; @@ -289,9 +288,8 @@ <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */ <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */ <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */ - <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS OSPI0/1 data region 0 */ - <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS OSPI0 data region 3 */ - <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/ + <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS data region 1 */ + <0x04 0x00000000 0x04 0x00000000 0x04 0x00000000>; /* FSS data region 0/3 */ }; }; diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi index b04829b3175d..39806f0ae513 100644 --- a/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi +++ b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi @@ -196,8 +196,8 @@ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&uart0_pins>; - clocks = <&pismu TMPV770X_CLK_PIUART0>; - clock-names = "apb_pclk"; + clocks = <&pismu TMPV770X_CLK_PIUART0>, <&pismu TMPV770X_CLK_PIUART0>; + clock-names = "uartclk", "apb_pclk"; status = "disabled"; }; @@ -207,8 +207,8 @@ interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>; - clocks = <&pismu TMPV770X_CLK_PIUART1>; - clock-names = "apb_pclk"; + clocks = <&pismu TMPV770X_CLK_PIUART1>, <&pismu TMPV770X_CLK_PIUART1>; + clock-names = "uartclk", "apb_pclk"; status = "disabled"; }; @@ -218,8 +218,8 @@ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>; - clocks = <&pismu TMPV770X_CLK_PIUART2>; - clock-names = "apb_pclk"; + clocks = <&pismu TMPV770X_CLK_PIUART2>, <&pismu TMPV770X_CLK_PIUART2>; + clock-names = "uartclk", "apb_pclk"; status = "disabled"; }; @@ -229,8 +229,8 @@ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; - clocks = <&pismu TMPV770X_CLK_PIUART2>; - clock-names = "apb_pclk"; + clocks = <&pismu TMPV770X_CLK_PIUART2>, <&pismu TMPV770X_CLK_PIUART2>; + clock-names = "uartclk", "apb_pclk"; status = "disabled"; }; @@ -360,8 +360,8 @@ num-cs = <1>; #address-cells = <1>; #size-cells = <0>; - clocks = <&pismu TMPV770X_CLK_PISPI1>; - clock-names = "apb_pclk"; + clocks = <&pismu TMPV770X_CLK_PISPI1>, <&pismu TMPV770X_CLK_PISPI1>; + clock-names = "sspclk", "apb_pclk"; status = "disabled"; }; @@ -374,8 +374,8 @@ num-cs = <1>; #address-cells = <1>; #size-cells = <0>; - clocks = <&pismu TMPV770X_CLK_PISPI1>; - clock-names = "apb_pclk"; + clocks = <&pismu TMPV770X_CLK_PISPI1>, <&pismu TMPV770X_CLK_PISPI1>; + clock-names = "sspclk", "apb_pclk"; status = "disabled"; }; @@ -388,8 +388,8 @@ num-cs = <1>; #address-cells = <1>; #size-cells = <0>; - clocks = <&pismu TMPV770X_CLK_PISPI2>; - clock-names = "apb_pclk"; + clocks = <&pismu TMPV770X_CLK_PISPI2>, <&pismu TMPV770X_CLK_PISPI2>; + clock-names = "sspclk", "apb_pclk"; status = "disabled"; }; @@ -402,8 +402,8 @@ num-cs = <1>; #address-cells = <1>; #size-cells = <0>; - clocks = <&pismu TMPV770X_CLK_PISPI3>; - clock-names = "apb_pclk"; + clocks = <&pismu TMPV770X_CLK_PISPI3>, <&pismu TMPV770X_CLK_PISPI3>; + clock-names = "sspclk", "apb_pclk"; status = "disabled"; }; @@ -416,8 +416,8 @@ num-cs = <1>; #address-cells = <1>; #size-cells = <0>; - clocks = <&pismu TMPV770X_CLK_PISPI4>; - clock-names = "apb_pclk"; + clocks = <&pismu TMPV770X_CLK_PISPI4>, <&pismu TMPV770X_CLK_PISPI4>; + clock-names = "sspclk", "apb_pclk"; status = "disabled"; }; @@ -430,8 +430,8 @@ num-cs = <1>; #address-cells = <1>; #size-cells = <0>; - clocks = <&pismu TMPV770X_CLK_PISPI5>; - clock-names = "apb_pclk"; + clocks = <&pismu TMPV770X_CLK_PISPI5>, <&pismu TMPV770X_CLK_PISPI5>; + clock-names = "sspclk", "apb_pclk"; status = "disabled"; }; @@ -444,8 +444,8 @@ num-cs = <1>; #address-cells = <1>; #size-cells = <0>; - clocks = <&pismu TMPV770X_CLK_PISPI6>; - clock-names = "apb_pclk"; + clocks = <&pismu TMPV770X_CLK_PISPI6>, <&pismu TMPV770X_CLK_PISPI6>; + clock-names = "sspclk", "apb_pclk"; status = "disabled"; }; diff --git a/arch/riscv/boot/dts/sophgo/cv1812h-huashan-pi.dts b/arch/riscv/boot/dts/sophgo/cv1812h-huashan-pi.dts index aa361f3a86bb..7b5f57853690 100644 --- a/arch/riscv/boot/dts/sophgo/cv1812h-huashan-pi.dts +++ b/arch/riscv/boot/dts/sophgo/cv1812h-huashan-pi.dts @@ -43,6 +43,15 @@ clock-frequency = <25000000>; }; +&sdhci0 { + status = "okay"; + bus-width = <4>; + no-1-8-v; + no-mmc; + no-sdio; + disable-wp; +}; + &uart0 { status = "okay"; }; diff --git a/arch/riscv/boot/dts/sophgo/cv18xx.dtsi b/arch/riscv/boot/dts/sophgo/cv18xx.dtsi index 891932ae470f..b724fb6d9689 100644 --- a/arch/riscv/boot/dts/sophgo/cv18xx.dtsi +++ b/arch/riscv/boot/dts/sophgo/cv18xx.dtsi @@ -297,6 +297,22 @@ status = "disabled"; }; + dmac: dma-controller@4330000 { + compatible = "snps,axi-dma-1.01a"; + reg = <0x04330000 0x1000>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk CLK_SDMA_AXI>, <&clk CLK_SDMA_AXI>; + clock-names = "core-clk", "cfgr-clk"; + #dma-cells = <1>; + dma-channels = <8>; + snps,block-size = <1024 1024 1024 1024 + 1024 1024 1024 1024>; + snps,priority = <0 1 2 3 4 5 6 7>; + snps,dma-masters = <2>; + snps,data-width = <4>; + status = "disabled"; + }; + plic: interrupt-controller@70000000 { reg = <0x70000000 0x4000000>; interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>; diff --git a/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts b/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts index 80cb017974d8..a3f9d6f22566 100644 --- a/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts +++ b/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts @@ -26,6 +26,83 @@ clock-frequency = <25000000>; }; +&emmc { + bus-width = <4>; + no-sdio; + no-sd; + non-removable; + wp-inverted; + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + mcu: syscon@17 { + compatible = "sophgo,sg2042-hwmon-mcu"; + reg = <0x17>; + #thermal-sensor-cells = <1>; + }; +}; + +&sd { + bus-width = <4>; + no-sdio; + no-mmc; + wp-inverted; + status = "okay"; +}; + &uart0 { status = "okay"; }; + +/ { + thermal-zones { + soc-thermal { + polling-delay-passive = <1000>; + polling-delay = <1000>; + thermal-sensors = <&mcu 0>; + + trips { + soc_active1: soc-active1 { + temperature = <30000>; + hysteresis = <8000>; + type = "active"; + }; + + soc_active2: soc-active2 { + temperature = <58000>; + hysteresis = <12000>; + type = "active"; + }; + + soc_active3: soc-active3 { + temperature = <70000>; + hysteresis = <10000>; + type = "active"; + }; + + soc_hot: soc-hot { + temperature = <80000>; + hysteresis = <5000>; + type = "hot"; + }; + }; + }; + + board-thermal { + polling-delay-passive = <1000>; + polling-delay = <1000>; + thermal-sensors = <&mcu 1>; + + trips { + board_active: board-active { + temperature = <75000>; + hysteresis = <8000>; + type = "active"; + }; + }; + }; + }; +}; diff --git a/arch/riscv/boot/dts/sophgo/sg2042.dtsi b/arch/riscv/boot/dts/sophgo/sg2042.dtsi index 34c802bd3f9b..4e5fa6591623 100644 --- a/arch/riscv/boot/dts/sophgo/sg2042.dtsi +++ b/arch/riscv/boot/dts/sophgo/sg2042.dtsi @@ -44,8 +44,127 @@ compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; + interrupt-parent = <&intc>; ranges; + i2c0: i2c@7030005000 { + compatible = "snps,designware-i2c"; + reg = <0x70 0x30005000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkgen GATE_CLK_APB_I2C>; + clock-names = "ref"; + clock-frequency = <100000>; + interrupts = <101 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rstgen RST_I2C0>; + status = "disabled"; + }; + + i2c1: i2c@7030006000 { + compatible = "snps,designware-i2c"; + reg = <0x70 0x30006000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkgen GATE_CLK_APB_I2C>; + clock-names = "ref"; + clock-frequency = <100000>; + interrupts = <102 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rstgen RST_I2C1>; + status = "disabled"; + }; + + i2c2: i2c@7030007000 { + compatible = "snps,designware-i2c"; + reg = <0x70 0x30007000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkgen GATE_CLK_APB_I2C>; + clock-names = "ref"; + clock-frequency = <100000>; + interrupts = <103 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rstgen RST_I2C2>; + status = "disabled"; + }; + + i2c3: i2c@7030008000 { + compatible = "snps,designware-i2c"; + reg = <0x70 0x30008000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkgen GATE_CLK_APB_I2C>; + clock-names = "ref"; + clock-frequency = <100000>; + interrupts = <104 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rstgen RST_I2C3>; + status = "disabled"; + }; + + gpio0: gpio@7030009000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x70 0x30009000 0x0 0x400>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkgen GATE_CLK_APB_GPIO>, + <&clkgen GATE_CLK_GPIO_DB>; + clock-names = "bus", "db"; + + port0a: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupts = <96 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + gpio1: gpio@703000a000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x70 0x3000a000 0x0 0x400>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkgen GATE_CLK_APB_GPIO>, + <&clkgen GATE_CLK_GPIO_DB>; + clock-names = "bus", "db"; + + port1a: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupts = <97 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + gpio2: gpio@703000b000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x70 0x3000b000 0x0 0x400>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkgen GATE_CLK_APB_GPIO>, + <&clkgen GATE_CLK_GPIO_DB>; + clock-names = "bus", "db"; + + port2a: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupts = <98 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + pllclk: clock-controller@70300100c0 { compatible = "sophgo,sg2042-pll"; reg = <0x70 0x300100c0 0x0 0x40>; @@ -388,7 +507,6 @@ uart0: serial@7040000000 { compatible = "snps,dw-apb-uart"; reg = <0x00000070 0x40000000 0x00000000 0x00001000>; - interrupt-parent = <&intc>; interrupts = <112 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <500000000>; clocks = <&clkgen GATE_CLK_UART_500M>, @@ -399,5 +517,33 @@ resets = <&rstgen RST_UART0>; status = "disabled"; }; + + emmc: mmc@704002a000 { + compatible = "sophgo,sg2042-dwcmshc"; + reg = <0x70 0x4002a000 0x0 0x1000>; + interrupt-parent = <&intc>; + interrupts = <134 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkgen GATE_CLK_EMMC_100M>, + <&clkgen GATE_CLK_AXI_EMMC>, + <&clkgen GATE_CLK_100K_EMMC>; + clock-names = "core", + "bus", + "timer"; + status = "disabled"; + }; + + sd: mmc@704002b000 { + compatible = "sophgo,sg2042-dwcmshc"; + reg = <0x70 0x4002b000 0x0 0x1000>; + interrupt-parent = <&intc>; + interrupts = <136 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkgen GATE_CLK_SD_100M>, + <&clkgen GATE_CLK_AXI_SD>, + <&clkgen GATE_CLK_100K_SD>; + clock-names = "core", + "bus", + "timer"; + status = "disabled"; + }; }; }; diff --git a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts index d9b4de9e4757..497d961456f3 100644 --- a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts +++ b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts @@ -23,6 +23,7 @@ serial3 = &uart3; serial4 = &uart4; serial5 = &uart5; + spi0 = &spi0; }; chosen { @@ -44,18 +45,6 @@ clock-frequency = <32768>; }; -&apb_clk { - clock-frequency = <62500000>; -}; - -&sdhci_clk { - clock-frequency = <198000000>; -}; - -&uart_sclk { - clock-frequency = <100000000>; -}; - &dmac0 { status = "okay"; }; @@ -79,3 +68,7 @@ &uart0 { status = "okay"; }; + +&spi0 { + status = "okay"; +}; diff --git a/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi index 1365d3a512a3..78977bdbbe3d 100644 --- a/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi +++ b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi @@ -25,18 +25,6 @@ clock-frequency = <32768>; }; -&apb_clk { - clock-frequency = <62500000>; -}; - -&sdhci_clk { - clock-frequency = <198000000>; -}; - -&uart_sclk { - clock-frequency = <100000000>; -}; - &dmac0 { status = "okay"; }; diff --git a/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts b/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts index 9a3884a73e13..7738d2895c5a 100644 --- a/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts +++ b/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts @@ -20,6 +20,7 @@ serial3 = &uart3; serial4 = &uart4; serial5 = &uart5; + spi0 = &spi0; }; chosen { @@ -30,3 +31,7 @@ &uart0 { status = "okay"; }; + +&spi0 { + status = "okay"; +}; diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi index 3c9974062c20..6992060e6a54 100644 --- a/arch/riscv/boot/dts/thead/th1520.dtsi +++ b/arch/riscv/boot/dts/thead/th1520.dtsi @@ -5,6 +5,7 @@ */ #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/clock/thead,th1520-clk-ap.h> / { compatible = "thead,th1520"; @@ -215,25 +216,6 @@ #clock-cells = <0>; }; - apb_clk: apb-clk-clock { - compatible = "fixed-clock"; - clock-output-names = "apb_clk"; - #clock-cells = <0>; - }; - - uart_sclk: uart-sclk-clock { - compatible = "fixed-clock"; - clock-output-names = "uart_sclk"; - #clock-cells = <0>; - }; - - sdhci_clk: sdhci-clock { - compatible = "fixed-clock"; - clock-frequency = <198000000>; - clock-output-names = "sdhci_clk"; - #clock-cells = <0>; - }; - soc { compatible = "simple-bus"; interrupt-parent = <&plic>; @@ -264,11 +246,22 @@ <&cpu3_intc 3>, <&cpu3_intc 7>; }; + spi0: spi@ffe700c000 { + compatible = "thead,th1520-spi", "snps,dw-apb-ssi"; + reg = <0xff 0xe700c000 0x0 0x1000>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk CLK_SPI>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + uart0: serial@ffe7014000 { compatible = "snps,dw-apb-uart"; reg = <0xff 0xe7014000 0x0 0x100>; interrupts = <36 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&uart_sclk>; + clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART0_PCLK>; + clock-names = "baudclk", "apb_pclk"; reg-shift = <2>; reg-io-width = <4>; status = "disabled"; @@ -278,7 +271,7 @@ compatible = "thead,th1520-dwcmshc"; reg = <0xff 0xe7080000 0x0 0x10000>; interrupts = <62 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sdhci_clk>; + clocks = <&clk CLK_EMMC_SDIO>; clock-names = "core"; status = "disabled"; }; @@ -287,7 +280,7 @@ compatible = "thead,th1520-dwcmshc"; reg = <0xff 0xe7090000 0x0 0x10000>; interrupts = <64 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sdhci_clk>; + clocks = <&clk CLK_EMMC_SDIO>; clock-names = "core"; status = "disabled"; }; @@ -296,7 +289,7 @@ compatible = "thead,th1520-dwcmshc"; reg = <0xff 0xe70a0000 0x0 0x10000>; interrupts = <71 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sdhci_clk>; + clocks = <&clk CLK_EMMC_SDIO>; clock-names = "core"; status = "disabled"; }; @@ -305,7 +298,8 @@ compatible = "snps,dw-apb-uart"; reg = <0xff 0xe7f00000 0x0 0x100>; interrupts = <37 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&uart_sclk>; + clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART1_PCLK>; + clock-names = "baudclk", "apb_pclk"; reg-shift = <2>; reg-io-width = <4>; status = "disabled"; @@ -315,7 +309,8 @@ compatible = "snps,dw-apb-uart"; reg = <0xff 0xe7f04000 0x0 0x100>; interrupts = <39 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&uart_sclk>; + clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART3_PCLK>; + clock-names = "baudclk", "apb_pclk"; reg-shift = <2>; reg-io-width = <4>; status = "disabled"; @@ -326,6 +321,7 @@ reg = <0xff 0xe7f34000 0x0 0x1000>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clk CLK_GPIO2>; portc: gpio-controller@0 { compatible = "snps,dw-apb-gpio-port"; @@ -344,6 +340,7 @@ reg = <0xff 0xe7f38000 0x0 0x1000>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clk CLK_GPIO3>; portd: gpio-controller@0 { compatible = "snps,dw-apb-gpio-port"; @@ -362,6 +359,7 @@ reg = <0xff 0xec005000 0x0 0x1000>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clk CLK_GPIO0>; porta: gpio-controller@0 { compatible = "snps,dw-apb-gpio-port"; @@ -380,6 +378,7 @@ reg = <0xff 0xec006000 0x0 0x1000>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clk CLK_GPIO1>; portb: gpio-controller@0 { compatible = "snps,dw-apb-gpio-port"; @@ -397,17 +396,25 @@ compatible = "snps,dw-apb-uart"; reg = <0xff 0xec010000 0x0 0x4000>; interrupts = <38 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&uart_sclk>; + clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART2_PCLK>; + clock-names = "baudclk", "apb_pclk"; reg-shift = <2>; reg-io-width = <4>; status = "disabled"; }; + clk: clock-controller@ffef010000 { + compatible = "thead,th1520-clk-ap"; + reg = <0xff 0xef010000 0x0 0x1000>; + clocks = <&osc>; + #clock-cells = <1>; + }; + dmac0: dma-controller@ffefc00000 { compatible = "snps,axi-dma-1.01a"; reg = <0xff 0xefc00000 0x0 0x1000>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb_clk>, <&apb_clk>; + clocks = <&clk CLK_PERI_APB_PCLK>, <&clk CLK_PERI_APB_PCLK>; clock-names = "core-clk", "cfgr-clk"; #dma-cells = <1>; dma-channels = <4>; @@ -422,7 +429,7 @@ timer0: timer@ffefc32000 { compatible = "snps,dw-apb-timer"; reg = <0xff 0xefc32000 0x0 0x14>; - clocks = <&apb_clk>; + clocks = <&clk CLK_PERI_APB_PCLK>; clock-names = "timer"; interrupts = <16 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -431,7 +438,7 @@ timer1: timer@ffefc32014 { compatible = "snps,dw-apb-timer"; reg = <0xff 0xefc32014 0x0 0x14>; - clocks = <&apb_clk>; + clocks = <&clk CLK_PERI_APB_PCLK>; clock-names = "timer"; interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -440,7 +447,7 @@ timer2: timer@ffefc32028 { compatible = "snps,dw-apb-timer"; reg = <0xff 0xefc32028 0x0 0x14>; - clocks = <&apb_clk>; + clocks = <&clk CLK_PERI_APB_PCLK>; clock-names = "timer"; interrupts = <18 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -449,7 +456,7 @@ timer3: timer@ffefc3203c { compatible = "snps,dw-apb-timer"; reg = <0xff 0xefc3203c 0x0 0x14>; - clocks = <&apb_clk>; + clocks = <&clk CLK_PERI_APB_PCLK>; clock-names = "timer"; interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -459,7 +466,8 @@ compatible = "snps,dw-apb-uart"; reg = <0xff 0xf7f08000 0x0 0x4000>; interrupts = <40 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&uart_sclk>; + clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART4_PCLK>; + clock-names = "baudclk", "apb_pclk"; reg-shift = <2>; reg-io-width = <4>; status = "disabled"; @@ -469,7 +477,8 @@ compatible = "snps,dw-apb-uart"; reg = <0xff 0xf7f0c000 0x0 0x4000>; interrupts = <41 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&uart_sclk>; + clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART5_PCLK>; + clock-names = "baudclk", "apb_pclk"; reg-shift = <2>; reg-io-width = <4>; status = "disabled"; @@ -478,7 +487,7 @@ timer4: timer@ffffc33000 { compatible = "snps,dw-apb-timer"; reg = <0xff 0xffc33000 0x0 0x14>; - clocks = <&apb_clk>; + clocks = <&clk CLK_PERI_APB_PCLK>; clock-names = "timer"; interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -487,7 +496,7 @@ timer5: timer@ffffc33014 { compatible = "snps,dw-apb-timer"; reg = <0xff 0xffc33014 0x0 0x14>; - clocks = <&apb_clk>; + clocks = <&clk CLK_PERI_APB_PCLK>; clock-names = "timer"; interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -496,7 +505,7 @@ timer6: timer@ffffc33028 { compatible = "snps,dw-apb-timer"; reg = <0xff 0xffc33028 0x0 0x14>; - clocks = <&apb_clk>; + clocks = <&clk CLK_PERI_APB_PCLK>; clock-names = "timer"; interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -505,7 +514,7 @@ timer7: timer@ffffc3303c { compatible = "snps,dw-apb-timer"; reg = <0xff 0xffc3303c 0x0 0x14>; - clocks = <&apb_clk>; + clocks = <&clk CLK_PERI_APB_PCLK>; clock-names = "timer"; interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; diff --git a/include/dt-bindings/clock/exynos7885.h b/include/dt-bindings/clock/exynos7885.h index 255e3aa94323..cfede84b46b9 100644 --- a/include/dt-bindings/clock/exynos7885.h +++ b/include/dt-bindings/clock/exynos7885.h @@ -69,6 +69,8 @@ #define CLK_GOUT_FSYS_MMC_EMBD 58 #define CLK_GOUT_FSYS_MMC_SDIO 59 #define CLK_GOUT_FSYS_USB30DRD 60 +#define CLK_MOUT_SHARED0_PLL 61 +#define CLK_MOUT_SHARED1_PLL 62 /* CMU_CORE */ #define CLK_MOUT_CORE_BUS_USER 1 @@ -132,16 +134,24 @@ #define CLK_GOUT_WDT1_PCLK 43 /* CMU_FSYS */ -#define CLK_MOUT_FSYS_BUS_USER 1 -#define CLK_MOUT_FSYS_MMC_CARD_USER 2 -#define CLK_MOUT_FSYS_MMC_EMBD_USER 3 -#define CLK_MOUT_FSYS_MMC_SDIO_USER 4 -#define CLK_MOUT_FSYS_USB30DRD_USER 4 -#define CLK_GOUT_MMC_CARD_ACLK 5 -#define CLK_GOUT_MMC_CARD_SDCLKIN 6 -#define CLK_GOUT_MMC_EMBD_ACLK 7 -#define CLK_GOUT_MMC_EMBD_SDCLKIN 8 -#define CLK_GOUT_MMC_SDIO_ACLK 9 -#define CLK_GOUT_MMC_SDIO_SDCLKIN 10 +#define CLK_MOUT_FSYS_BUS_USER 1 +#define CLK_MOUT_FSYS_MMC_CARD_USER 2 +#define CLK_MOUT_FSYS_MMC_EMBD_USER 3 +#define CLK_MOUT_FSYS_MMC_SDIO_USER 4 +#define CLK_GOUT_MMC_CARD_ACLK 5 +#define CLK_GOUT_MMC_CARD_SDCLKIN 6 +#define CLK_GOUT_MMC_EMBD_ACLK 7 +#define CLK_GOUT_MMC_EMBD_SDCLKIN 8 +#define CLK_GOUT_MMC_SDIO_ACLK 9 +#define CLK_GOUT_MMC_SDIO_SDCLKIN 10 +#define CLK_MOUT_FSYS_USB30DRD_USER 11 +#define CLK_MOUT_USB_PLL 12 +#define CLK_FOUT_USB_PLL 13 +#define CLK_FSYS_USB20PHY_CLKCORE 14 +#define CLK_FSYS_USB30DRD_ACLK_20PHYCTRL 15 +#define CLK_FSYS_USB30DRD_ACLK_30PHYCTRL_0 16 +#define CLK_FSYS_USB30DRD_ACLK_30PHYCTRL_1 17 +#define CLK_FSYS_USB30DRD_BUS_CLK_EARLY 18 +#define CLK_FSYS_USB30DRD_REF_CLK 19 #endif /* _DT_BINDINGS_CLOCK_EXYNOS_7885_H */ diff --git a/include/dt-bindings/clock/exynos850.h b/include/dt-bindings/clock/exynos850.h index 7666241520f8..80dacda57229 100644 --- a/include/dt-bindings/clock/exynos850.h +++ b/include/dt-bindings/clock/exynos850.h @@ -358,6 +358,7 @@ #define CLK_GOUT_UART_PCLK 32 #define CLK_GOUT_WDT0_PCLK 33 #define CLK_GOUT_WDT1_PCLK 34 +#define CLK_GOUT_BUSIF_TMU_PCLK 35 /* CMU_CORE */ #define CLK_MOUT_CORE_BUS_USER 1 diff --git a/include/dt-bindings/clock/qcom,gcc-msm8998.h b/include/dt-bindings/clock/qcom,gcc-msm8998.h index b5456a64d421..5b0dde080900 100644 --- a/include/dt-bindings/clock/qcom,gcc-msm8998.h +++ b/include/dt-bindings/clock/qcom,gcc-msm8998.h @@ -193,10 +193,15 @@ #define GCC_MMSS_GPLL0_DIV_CLK 184 #define GCC_GPU_GPLL0_DIV_CLK 185 #define GCC_GPU_GPLL0_CLK 186 +#define HLOS1_VOTE_LPASS_CORE_SMMU_CLK 187 +#define HLOS1_VOTE_LPASS_ADSP_SMMU_CLK 188 +#define GCC_MSS_Q6_BIMC_AXI_CLK 189 #define PCIE_0_GDSC 0 #define UFS_GDSC 1 #define USB_30_GDSC 2 +#define LPASS_ADSP_GDSC 3 +#define LPASS_CORE_GDSC 4 #define GCC_BLSP1_QUP1_BCR 0 #define GCC_BLSP1_QUP2_BCR 1 diff --git a/include/dt-bindings/clock/qcom,gcc-sc8180x.h b/include/dt-bindings/clock/qcom,gcc-sc8180x.h index 90c6e021a035..487b12c19db5 100644 --- a/include/dt-bindings/clock/qcom,gcc-sc8180x.h +++ b/include/dt-bindings/clock/qcom,gcc-sc8180x.h @@ -294,6 +294,10 @@ #define GCC_VIDEO_AXI0_CLK_BCR 42 #define GCC_VIDEO_AXI1_CLK_BCR 43 #define GCC_USB3_DP_PHY_SEC_BCR 44 +#define GCC_USB3_UNIPHY_MP0_BCR 45 +#define GCC_USB3_UNIPHY_MP1_BCR 46 +#define GCC_USB3UNIPHY_PHY_MP0_BCR 47 +#define GCC_USB3UNIPHY_PHY_MP1_BCR 48 /* GCC GDSCRs */ #define EMAC_GDSC 0 diff --git a/include/dt-bindings/clock/qcom,sm4450-camcc.h b/include/dt-bindings/clock/qcom,sm4450-camcc.h new file mode 100644 index 000000000000..bf077951bf1c --- /dev/null +++ b/include/dt-bindings/clock/qcom,sm4450-camcc.h @@ -0,0 +1,106 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#ifndef _DT_BINDINGS_CLK_QCOM_CAM_CC_SM4450_H +#define _DT_BINDINGS_CLK_QCOM_CAM_CC_SM4450_H + +/* CAM_CC clocks */ +#define CAM_CC_BPS_AHB_CLK 0 +#define CAM_CC_BPS_AREG_CLK 1 +#define CAM_CC_BPS_CLK 2 +#define CAM_CC_BPS_CLK_SRC 3 +#define CAM_CC_CAMNOC_ATB_CLK 4 +#define CAM_CC_CAMNOC_AXI_CLK 5 +#define CAM_CC_CAMNOC_AXI_CLK_SRC 6 +#define CAM_CC_CAMNOC_AXI_HF_CLK 7 +#define CAM_CC_CAMNOC_AXI_SF_CLK 8 +#define CAM_CC_CCI_0_CLK 9 +#define CAM_CC_CCI_0_CLK_SRC 10 +#define CAM_CC_CCI_1_CLK 11 +#define CAM_CC_CCI_1_CLK_SRC 12 +#define CAM_CC_CORE_AHB_CLK 13 +#define CAM_CC_CPAS_AHB_CLK 14 +#define CAM_CC_CPHY_RX_CLK_SRC 15 +#define CAM_CC_CRE_AHB_CLK 16 +#define CAM_CC_CRE_CLK 17 +#define CAM_CC_CRE_CLK_SRC 18 +#define CAM_CC_CSI0PHYTIMER_CLK 19 +#define CAM_CC_CSI0PHYTIMER_CLK_SRC 20 +#define CAM_CC_CSI1PHYTIMER_CLK 21 +#define CAM_CC_CSI1PHYTIMER_CLK_SRC 22 +#define CAM_CC_CSI2PHYTIMER_CLK 23 +#define CAM_CC_CSI2PHYTIMER_CLK_SRC 24 +#define CAM_CC_CSIPHY0_CLK 25 +#define CAM_CC_CSIPHY1_CLK 26 +#define CAM_CC_CSIPHY2_CLK 27 +#define CAM_CC_FAST_AHB_CLK_SRC 28 +#define CAM_CC_ICP_ATB_CLK 29 +#define CAM_CC_ICP_CLK 30 +#define CAM_CC_ICP_CLK_SRC 31 +#define CAM_CC_ICP_CTI_CLK 32 +#define CAM_CC_ICP_TS_CLK 33 +#define CAM_CC_MCLK0_CLK 34 +#define CAM_CC_MCLK0_CLK_SRC 35 +#define CAM_CC_MCLK1_CLK 36 +#define CAM_CC_MCLK1_CLK_SRC 37 +#define CAM_CC_MCLK2_CLK 38 +#define CAM_CC_MCLK2_CLK_SRC 39 +#define CAM_CC_MCLK3_CLK 40 +#define CAM_CC_MCLK3_CLK_SRC 41 +#define CAM_CC_OPE_0_AHB_CLK 42 +#define CAM_CC_OPE_0_AREG_CLK 43 +#define CAM_CC_OPE_0_CLK 44 +#define CAM_CC_OPE_0_CLK_SRC 45 +#define CAM_CC_PLL0 46 +#define CAM_CC_PLL0_OUT_EVEN 47 +#define CAM_CC_PLL0_OUT_ODD 48 +#define CAM_CC_PLL1 49 +#define CAM_CC_PLL1_OUT_EVEN 50 +#define CAM_CC_PLL2 51 +#define CAM_CC_PLL2_OUT_EVEN 52 +#define CAM_CC_PLL3 53 +#define CAM_CC_PLL3_OUT_EVEN 54 +#define CAM_CC_PLL4 55 +#define CAM_CC_PLL4_OUT_EVEN 56 +#define CAM_CC_SLOW_AHB_CLK_SRC 57 +#define CAM_CC_SOC_AHB_CLK 58 +#define CAM_CC_SYS_TMR_CLK 59 +#define CAM_CC_TFE_0_AHB_CLK 60 +#define CAM_CC_TFE_0_CLK 61 +#define CAM_CC_TFE_0_CLK_SRC 62 +#define CAM_CC_TFE_0_CPHY_RX_CLK 63 +#define CAM_CC_TFE_0_CSID_CLK 64 +#define CAM_CC_TFE_0_CSID_CLK_SRC 65 +#define CAM_CC_TFE_1_AHB_CLK 66 +#define CAM_CC_TFE_1_CLK 67 +#define CAM_CC_TFE_1_CLK_SRC 68 +#define CAM_CC_TFE_1_CPHY_RX_CLK 69 +#define CAM_CC_TFE_1_CSID_CLK 70 +#define CAM_CC_TFE_1_CSID_CLK_SRC 71 + +/* CAM_CC power domains */ +#define CAM_CC_CAMSS_TOP_GDSC 0 + +/* CAM_CC resets */ +#define CAM_CC_BPS_BCR 0 +#define CAM_CC_CAMNOC_BCR 1 +#define CAM_CC_CAMSS_TOP_BCR 2 +#define CAM_CC_CCI_0_BCR 3 +#define CAM_CC_CCI_1_BCR 4 +#define CAM_CC_CPAS_BCR 5 +#define CAM_CC_CRE_BCR 6 +#define CAM_CC_CSI0PHY_BCR 7 +#define CAM_CC_CSI1PHY_BCR 8 +#define CAM_CC_CSI2PHY_BCR 9 +#define CAM_CC_ICP_BCR 10 +#define CAM_CC_MCLK0_BCR 11 +#define CAM_CC_MCLK1_BCR 12 +#define CAM_CC_MCLK2_BCR 13 +#define CAM_CC_MCLK3_BCR 14 +#define CAM_CC_OPE_0_BCR 15 +#define CAM_CC_TFE_0_BCR 16 +#define CAM_CC_TFE_1_BCR 17 + +#endif diff --git a/include/dt-bindings/clock/qcom,sm4450-dispcc.h b/include/dt-bindings/clock/qcom,sm4450-dispcc.h new file mode 100644 index 000000000000..ca6f2ef90157 --- /dev/null +++ b/include/dt-bindings/clock/qcom,sm4450-dispcc.h @@ -0,0 +1,51 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#ifndef _DT_BINDINGS_CLK_QCOM_DISP_CC_SM4450_H +#define _DT_BINDINGS_CLK_QCOM_DISP_CC_SM4450_H + +/* DISP_CC clocks */ +#define DISP_CC_MDSS_AHB1_CLK 0 +#define DISP_CC_MDSS_AHB_CLK 1 +#define DISP_CC_MDSS_AHB_CLK_SRC 2 +#define DISP_CC_MDSS_BYTE0_CLK 3 +#define DISP_CC_MDSS_BYTE0_CLK_SRC 4 +#define DISP_CC_MDSS_BYTE0_DIV_CLK_SRC 5 +#define DISP_CC_MDSS_BYTE0_INTF_CLK 6 +#define DISP_CC_MDSS_ESC0_CLK 7 +#define DISP_CC_MDSS_ESC0_CLK_SRC 8 +#define DISP_CC_MDSS_MDP1_CLK 9 +#define DISP_CC_MDSS_MDP_CLK 10 +#define DISP_CC_MDSS_MDP_CLK_SRC 11 +#define DISP_CC_MDSS_MDP_LUT1_CLK 12 +#define DISP_CC_MDSS_MDP_LUT_CLK 13 +#define DISP_CC_MDSS_NON_GDSC_AHB_CLK 14 +#define DISP_CC_MDSS_PCLK0_CLK 15 +#define DISP_CC_MDSS_PCLK0_CLK_SRC 16 +#define DISP_CC_MDSS_ROT1_CLK 17 +#define DISP_CC_MDSS_ROT_CLK 18 +#define DISP_CC_MDSS_ROT_CLK_SRC 19 +#define DISP_CC_MDSS_RSCC_AHB_CLK 20 +#define DISP_CC_MDSS_RSCC_VSYNC_CLK 21 +#define DISP_CC_MDSS_VSYNC1_CLK 22 +#define DISP_CC_MDSS_VSYNC_CLK 23 +#define DISP_CC_MDSS_VSYNC_CLK_SRC 24 +#define DISP_CC_PLL0 25 +#define DISP_CC_PLL1 26 +#define DISP_CC_SLEEP_CLK 27 +#define DISP_CC_SLEEP_CLK_SRC 28 +#define DISP_CC_XO_CLK 29 +#define DISP_CC_XO_CLK_SRC 30 + +/* DISP_CC power domains */ +#define DISP_CC_MDSS_CORE_GDSC 0 +#define DISP_CC_MDSS_CORE_INT2_GDSC 1 + +/* DISP_CC resets */ +#define DISP_CC_MDSS_CORE_BCR 0 +#define DISP_CC_MDSS_CORE_INT2_BCR 1 +#define DISP_CC_MDSS_RSCC_BCR 2 + +#endif diff --git a/include/dt-bindings/clock/qcom,sm4450-gpucc.h b/include/dt-bindings/clock/qcom,sm4450-gpucc.h new file mode 100644 index 000000000000..304f83e5f645 --- /dev/null +++ b/include/dt-bindings/clock/qcom,sm4450-gpucc.h @@ -0,0 +1,62 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#ifndef _DT_BINDINGS_CLK_QCOM_GPU_CC_SM4450_H +#define _DT_BINDINGS_CLK_QCOM_GPU_CC_SM4450_H + +/* GPU_CC clocks */ +#define GPU_CC_AHB_CLK 0 +#define GPU_CC_CB_CLK 1 +#define GPU_CC_CRC_AHB_CLK 2 +#define GPU_CC_CX_FF_CLK 3 +#define GPU_CC_CX_GFX3D_CLK 4 +#define GPU_CC_CX_GFX3D_SLV_CLK 5 +#define GPU_CC_CX_GMU_CLK 6 +#define GPU_CC_CX_SNOC_DVM_CLK 7 +#define GPU_CC_CXO_AON_CLK 8 +#define GPU_CC_CXO_CLK 9 +#define GPU_CC_DEMET_CLK 10 +#define GPU_CC_DEMET_DIV_CLK_SRC 11 +#define GPU_CC_FF_CLK_SRC 12 +#define GPU_CC_FREQ_MEASURE_CLK 13 +#define GPU_CC_GMU_CLK_SRC 14 +#define GPU_CC_GX_CXO_CLK 15 +#define GPU_CC_GX_FF_CLK 16 +#define GPU_CC_GX_GFX3D_CLK 17 +#define GPU_CC_GX_GFX3D_CLK_SRC 18 +#define GPU_CC_GX_GFX3D_RDVM_CLK 19 +#define GPU_CC_GX_GMU_CLK 20 +#define GPU_CC_GX_VSENSE_CLK 21 +#define GPU_CC_HUB_AHB_DIV_CLK_SRC 22 +#define GPU_CC_HUB_AON_CLK 23 +#define GPU_CC_HUB_CLK_SRC 24 +#define GPU_CC_HUB_CX_INT_CLK 25 +#define GPU_CC_HUB_CX_INT_DIV_CLK_SRC 26 +#define GPU_CC_MEMNOC_GFX_CLK 27 +#define GPU_CC_MND1X_0_GFX3D_CLK 28 +#define GPU_CC_PLL0 29 +#define GPU_CC_PLL1 30 +#define GPU_CC_SLEEP_CLK 31 +#define GPU_CC_XO_CLK_SRC 32 +#define GPU_CC_XO_DIV_CLK_SRC 33 + +/* GPU_CC power domains */ +#define GPU_CC_CX_GDSC 0 +#define GPU_CC_GX_GDSC 1 + +/* GPU_CC resets */ +#define GPU_CC_ACD_BCR 0 +#define GPU_CC_CB_BCR 1 +#define GPU_CC_CX_BCR 2 +#define GPU_CC_FAST_HUB_BCR 3 +#define GPU_CC_FF_BCR 4 +#define GPU_CC_GFX3D_AON_BCR 5 +#define GPU_CC_GMU_BCR 6 +#define GPU_CC_GX_BCR 7 +#define GPU_CC_XO_BCR 8 +#define GPU_CC_GX_ACD_IROOT_BCR 9 +#define GPU_CC_RBCPR_BCR 10 + +#endif diff --git a/include/dt-bindings/clock/qcom,sm8150-camcc.h b/include/dt-bindings/clock/qcom,sm8150-camcc.h new file mode 100644 index 000000000000..5444035efa93 --- /dev/null +++ b/include/dt-bindings/clock/qcom,sm8150-camcc.h @@ -0,0 +1,135 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#ifndef _DT_BINDINGS_CLK_QCOM_CAM_CC_SM8150_H +#define _DT_BINDINGS_CLK_QCOM_CAM_CC_SM8150_H + +/* CAM_CC clocks */ +#define CAM_CC_PLL0 0 +#define CAM_CC_PLL0_OUT_EVEN 1 +#define CAM_CC_PLL0_OUT_ODD 2 +#define CAM_CC_PLL1 3 +#define CAM_CC_PLL1_OUT_EVEN 4 +#define CAM_CC_PLL2 5 +#define CAM_CC_PLL2_OUT_MAIN 6 +#define CAM_CC_PLL3 7 +#define CAM_CC_PLL3_OUT_EVEN 8 +#define CAM_CC_PLL4 9 +#define CAM_CC_PLL4_OUT_EVEN 10 +#define CAM_CC_BPS_AHB_CLK 11 +#define CAM_CC_BPS_AREG_CLK 12 +#define CAM_CC_BPS_AXI_CLK 13 +#define CAM_CC_BPS_CLK 14 +#define CAM_CC_BPS_CLK_SRC 15 +#define CAM_CC_CAMNOC_AXI_CLK 16 +#define CAM_CC_CAMNOC_AXI_CLK_SRC 17 +#define CAM_CC_CAMNOC_DCD_XO_CLK 18 +#define CAM_CC_CCI_0_CLK 19 +#define CAM_CC_CCI_0_CLK_SRC 20 +#define CAM_CC_CCI_1_CLK 21 +#define CAM_CC_CCI_1_CLK_SRC 22 +#define CAM_CC_CORE_AHB_CLK 23 +#define CAM_CC_CPAS_AHB_CLK 24 +#define CAM_CC_CPHY_RX_CLK_SRC 25 +#define CAM_CC_CSI0PHYTIMER_CLK 26 +#define CAM_CC_CSI0PHYTIMER_CLK_SRC 27 +#define CAM_CC_CSI1PHYTIMER_CLK 28 +#define CAM_CC_CSI1PHYTIMER_CLK_SRC 29 +#define CAM_CC_CSI2PHYTIMER_CLK 30 +#define CAM_CC_CSI2PHYTIMER_CLK_SRC 31 +#define CAM_CC_CSI3PHYTIMER_CLK 32 +#define CAM_CC_CSI3PHYTIMER_CLK_SRC 33 +#define CAM_CC_CSIPHY0_CLK 34 +#define CAM_CC_CSIPHY1_CLK 35 +#define CAM_CC_CSIPHY2_CLK 36 +#define CAM_CC_CSIPHY3_CLK 37 +#define CAM_CC_FAST_AHB_CLK_SRC 38 +#define CAM_CC_FD_CORE_CLK 39 +#define CAM_CC_FD_CORE_CLK_SRC 40 +#define CAM_CC_FD_CORE_UAR_CLK 41 +#define CAM_CC_GDSC_CLK 42 +#define CAM_CC_ICP_AHB_CLK 43 +#define CAM_CC_ICP_CLK 44 +#define CAM_CC_ICP_CLK_SRC 45 +#define CAM_CC_IFE_0_AXI_CLK 46 +#define CAM_CC_IFE_0_CLK 47 +#define CAM_CC_IFE_0_CLK_SRC 48 +#define CAM_CC_IFE_0_CPHY_RX_CLK 49 +#define CAM_CC_IFE_0_CSID_CLK 50 +#define CAM_CC_IFE_0_CSID_CLK_SRC 51 +#define CAM_CC_IFE_0_DSP_CLK 52 +#define CAM_CC_IFE_1_AXI_CLK 53 +#define CAM_CC_IFE_1_CLK 54 +#define CAM_CC_IFE_1_CLK_SRC 55 +#define CAM_CC_IFE_1_CPHY_RX_CLK 56 +#define CAM_CC_IFE_1_CSID_CLK 57 +#define CAM_CC_IFE_1_CSID_CLK_SRC 58 +#define CAM_CC_IFE_1_DSP_CLK 59 +#define CAM_CC_IFE_LITE_0_CLK 60 +#define CAM_CC_IFE_LITE_0_CLK_SRC 61 +#define CAM_CC_IFE_LITE_0_CPHY_RX_CLK 62 +#define CAM_CC_IFE_LITE_0_CSID_CLK 63 +#define CAM_CC_IFE_LITE_0_CSID_CLK_SRC 64 +#define CAM_CC_IFE_LITE_1_CLK 65 +#define CAM_CC_IFE_LITE_1_CLK_SRC 66 +#define CAM_CC_IFE_LITE_1_CPHY_RX_CLK 67 +#define CAM_CC_IFE_LITE_1_CSID_CLK 68 +#define CAM_CC_IFE_LITE_1_CSID_CLK_SRC 69 +#define CAM_CC_IPE_0_AHB_CLK 70 +#define CAM_CC_IPE_0_AREG_CLK 71 +#define CAM_CC_IPE_0_AXI_CLK 72 +#define CAM_CC_IPE_0_CLK 73 +#define CAM_CC_IPE_0_CLK_SRC 74 +#define CAM_CC_IPE_1_AHB_CLK 75 +#define CAM_CC_IPE_1_AREG_CLK 76 +#define CAM_CC_IPE_1_AXI_CLK 77 +#define CAM_CC_IPE_1_CLK 78 +#define CAM_CC_JPEG_CLK 79 +#define CAM_CC_JPEG_CLK_SRC 80 +#define CAM_CC_LRME_CLK 81 +#define CAM_CC_LRME_CLK_SRC 82 +#define CAM_CC_MCLK0_CLK 83 +#define CAM_CC_MCLK0_CLK_SRC 84 +#define CAM_CC_MCLK1_CLK 85 +#define CAM_CC_MCLK1_CLK_SRC 86 +#define CAM_CC_MCLK2_CLK 87 +#define CAM_CC_MCLK2_CLK_SRC 88 +#define CAM_CC_MCLK3_CLK 89 +#define CAM_CC_MCLK3_CLK_SRC 90 +#define CAM_CC_SLOW_AHB_CLK_SRC 91 + +/* CAM_CC power domains */ +#define TITAN_TOP_GDSC 0 +#define BPS_GDSC 1 +#define IFE_0_GDSC 2 +#define IFE_1_GDSC 3 +#define IPE_0_GDSC 4 +#define IPE_1_GDSC 5 + +/* CAM_CC resets */ +#define CAM_CC_BPS_BCR 0 +#define CAM_CC_CAMNOC_BCR 1 +#define CAM_CC_CCI_BCR 2 +#define CAM_CC_CPAS_BCR 3 +#define CAM_CC_CSI0PHY_BCR 4 +#define CAM_CC_CSI1PHY_BCR 5 +#define CAM_CC_CSI2PHY_BCR 6 +#define CAM_CC_CSI3PHY_BCR 7 +#define CAM_CC_FD_BCR 8 +#define CAM_CC_ICP_BCR 9 +#define CAM_CC_IFE_0_BCR 10 +#define CAM_CC_IFE_1_BCR 11 +#define CAM_CC_IFE_LITE_0_BCR 12 +#define CAM_CC_IFE_LITE_1_BCR 13 +#define CAM_CC_IPE_0_BCR 14 +#define CAM_CC_IPE_1_BCR 15 +#define CAM_CC_JPEG_BCR 16 +#define CAM_CC_LRME_BCR 17 +#define CAM_CC_MCLK0_BCR 18 +#define CAM_CC_MCLK1_BCR 19 +#define CAM_CC_MCLK2_BCR 20 +#define CAM_CC_MCLK3_BCR 21 + +#endif diff --git a/include/dt-bindings/clock/qcom,sm8650-dispcc.h b/include/dt-bindings/clock/qcom,sm8650-dispcc.h index b0a668b395a5..c0a291188f28 100644..120000 --- a/include/dt-bindings/clock/qcom,sm8650-dispcc.h +++ b/include/dt-bindings/clock/qcom,sm8650-dispcc.h @@ -1,102 +1 @@ -/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ -/* - * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved - * Copyright (c) 2023, Linaro Ltd. - */ - -#ifndef _DT_BINDINGS_CLK_QCOM_SM8650_DISP_CC_H -#define _DT_BINDINGS_CLK_QCOM_SM8650_DISP_CC_H - -/* DISP_CC clocks */ -#define DISP_CC_MDSS_ACCU_CLK 0 -#define DISP_CC_MDSS_AHB1_CLK 1 -#define DISP_CC_MDSS_AHB_CLK 2 -#define DISP_CC_MDSS_AHB_CLK_SRC 3 -#define DISP_CC_MDSS_BYTE0_CLK 4 -#define DISP_CC_MDSS_BYTE0_CLK_SRC 5 -#define DISP_CC_MDSS_BYTE0_DIV_CLK_SRC 6 -#define DISP_CC_MDSS_BYTE0_INTF_CLK 7 -#define DISP_CC_MDSS_BYTE1_CLK 8 -#define DISP_CC_MDSS_BYTE1_CLK_SRC 9 -#define DISP_CC_MDSS_BYTE1_DIV_CLK_SRC 10 -#define DISP_CC_MDSS_BYTE1_INTF_CLK 11 -#define DISP_CC_MDSS_DPTX0_AUX_CLK 12 -#define DISP_CC_MDSS_DPTX0_AUX_CLK_SRC 13 -#define DISP_CC_MDSS_DPTX0_CRYPTO_CLK 14 -#define DISP_CC_MDSS_DPTX0_LINK_CLK 15 -#define DISP_CC_MDSS_DPTX0_LINK_CLK_SRC 16 -#define DISP_CC_MDSS_DPTX0_LINK_DIV_CLK_SRC 17 -#define DISP_CC_MDSS_DPTX0_LINK_INTF_CLK 18 -#define DISP_CC_MDSS_DPTX0_PIXEL0_CLK 19 -#define DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC 20 -#define DISP_CC_MDSS_DPTX0_PIXEL1_CLK 21 -#define DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC 22 -#define DISP_CC_MDSS_DPTX0_USB_ROUTER_LINK_INTF_CLK 23 -#define DISP_CC_MDSS_DPTX1_AUX_CLK 24 -#define DISP_CC_MDSS_DPTX1_AUX_CLK_SRC 25 -#define DISP_CC_MDSS_DPTX1_CRYPTO_CLK 26 -#define DISP_CC_MDSS_DPTX1_LINK_CLK 27 -#define DISP_CC_MDSS_DPTX1_LINK_CLK_SRC 28 -#define DISP_CC_MDSS_DPTX1_LINK_DIV_CLK_SRC 29 -#define DISP_CC_MDSS_DPTX1_LINK_INTF_CLK 30 -#define DISP_CC_MDSS_DPTX1_PIXEL0_CLK 31 -#define DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC 32 -#define DISP_CC_MDSS_DPTX1_PIXEL1_CLK 33 -#define DISP_CC_MDSS_DPTX1_PIXEL1_CLK_SRC 34 -#define DISP_CC_MDSS_DPTX1_USB_ROUTER_LINK_INTF_CLK 35 -#define DISP_CC_MDSS_DPTX2_AUX_CLK 36 -#define DISP_CC_MDSS_DPTX2_AUX_CLK_SRC 37 -#define DISP_CC_MDSS_DPTX2_CRYPTO_CLK 38 -#define DISP_CC_MDSS_DPTX2_LINK_CLK 39 -#define DISP_CC_MDSS_DPTX2_LINK_CLK_SRC 40 -#define DISP_CC_MDSS_DPTX2_LINK_DIV_CLK_SRC 41 -#define DISP_CC_MDSS_DPTX2_LINK_INTF_CLK 42 -#define DISP_CC_MDSS_DPTX2_PIXEL0_CLK 43 -#define DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC 44 -#define DISP_CC_MDSS_DPTX2_PIXEL1_CLK 45 -#define DISP_CC_MDSS_DPTX2_PIXEL1_CLK_SRC 46 -#define DISP_CC_MDSS_DPTX3_AUX_CLK 47 -#define DISP_CC_MDSS_DPTX3_AUX_CLK_SRC 48 -#define DISP_CC_MDSS_DPTX3_CRYPTO_CLK 49 -#define DISP_CC_MDSS_DPTX3_LINK_CLK 50 -#define DISP_CC_MDSS_DPTX3_LINK_CLK_SRC 51 -#define DISP_CC_MDSS_DPTX3_LINK_DIV_CLK_SRC 52 -#define DISP_CC_MDSS_DPTX3_LINK_INTF_CLK 53 -#define DISP_CC_MDSS_DPTX3_PIXEL0_CLK 54 -#define DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC 55 -#define DISP_CC_MDSS_ESC0_CLK 56 -#define DISP_CC_MDSS_ESC0_CLK_SRC 57 -#define DISP_CC_MDSS_ESC1_CLK 58 -#define DISP_CC_MDSS_ESC1_CLK_SRC 59 -#define DISP_CC_MDSS_MDP1_CLK 60 -#define DISP_CC_MDSS_MDP_CLK 61 -#define DISP_CC_MDSS_MDP_CLK_SRC 62 -#define DISP_CC_MDSS_MDP_LUT1_CLK 63 -#define DISP_CC_MDSS_MDP_LUT_CLK 64 -#define DISP_CC_MDSS_NON_GDSC_AHB_CLK 65 -#define DISP_CC_MDSS_PCLK0_CLK 66 -#define DISP_CC_MDSS_PCLK0_CLK_SRC 67 -#define DISP_CC_MDSS_PCLK1_CLK 68 -#define DISP_CC_MDSS_PCLK1_CLK_SRC 69 -#define DISP_CC_MDSS_RSCC_AHB_CLK 70 -#define DISP_CC_MDSS_RSCC_VSYNC_CLK 71 -#define DISP_CC_MDSS_VSYNC1_CLK 72 -#define DISP_CC_MDSS_VSYNC_CLK 73 -#define DISP_CC_MDSS_VSYNC_CLK_SRC 74 -#define DISP_CC_PLL0 75 -#define DISP_CC_PLL1 76 -#define DISP_CC_SLEEP_CLK 77 -#define DISP_CC_SLEEP_CLK_SRC 78 -#define DISP_CC_XO_CLK 79 -#define DISP_CC_XO_CLK_SRC 80 - -/* DISP_CC resets */ -#define DISP_CC_MDSS_CORE_BCR 0 -#define DISP_CC_MDSS_CORE_INT2_BCR 1 -#define DISP_CC_MDSS_RSCC_BCR 2 - -/* DISP_CC GDSCR */ -#define MDSS_GDSC 0 -#define MDSS_INT2_GDSC 1 - -#endif +qcom,sm8550-dispcc.h
\ No newline at end of file diff --git a/include/dt-bindings/clock/renesas,r9a09g057-cpg.h b/include/dt-bindings/clock/renesas,r9a09g057-cpg.h new file mode 100644 index 000000000000..541e6d719bd6 --- /dev/null +++ b/include/dt-bindings/clock/renesas,r9a09g057-cpg.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) + * + * Copyright (C) 2024 Renesas Electronics Corp. + */ +#ifndef __DT_BINDINGS_CLOCK_RENESAS_R9A09G057_CPG_H__ +#define __DT_BINDINGS_CLOCK_RENESAS_R9A09G057_CPG_H__ + +#include <dt-bindings/clock/renesas-cpg-mssr.h> + +/* Core Clock list */ +#define R9A09G057_SYS_0_PCLK 0 +#define R9A09G057_CA55_0_CORE_CLK0 1 +#define R9A09G057_CA55_0_CORE_CLK1 2 +#define R9A09G057_CA55_0_CORE_CLK2 3 +#define R9A09G057_CA55_0_CORE_CLK3 4 +#define R9A09G057_CA55_0_PERIPHCLK 5 +#define R9A09G057_CM33_CLK0 6 +#define R9A09G057_CST_0_SWCLKTCK 7 +#define R9A09G057_IOTOP_0_SHCLK 8 + +#endif /* __DT_BINDINGS_CLOCK_RENESAS_R9A09G057_CPG_H__ */ diff --git a/include/dt-bindings/clock/samsung,exynosautov9.h b/include/dt-bindings/clock/samsung,exynosautov9.h index 3065375c2d8b..ce8fb8f7d718 100644 --- a/include/dt-bindings/clock/samsung,exynosautov9.h +++ b/include/dt-bindings/clock/samsung,exynosautov9.h @@ -179,6 +179,17 @@ #define CLK_GOUT_CORE_CCI_PCLK 4 #define CLK_GOUT_CORE_CMU_CORE_PCLK 5 +/* CMU_DPUM */ +#define CLK_MOUT_DPUM_BUS_USER 1 +#define CLK_DOUT_DPUM_BUSP 2 +#define CLK_GOUT_DPUM_ACLK_DECON 3 +#define CLK_GOUT_DPUM_ACLK_DMA 4 +#define CLK_GOUT_DPUM_ACLK_DPP 5 +#define CLK_GOUT_DPUM_SYSMMU_D0_CLK 6 +#define CLK_GOUT_DPUM_SYSMMU_D1_CLK 7 +#define CLK_GOUT_DPUM_SYSMMU_D2_CLK 8 +#define CLK_GOUT_DPUM_SYSMMU_D3_CLK 9 + /* CMU_FSYS0 */ #define CLK_MOUT_FSYS0_BUS_USER 1 #define CLK_MOUT_FSYS0_PCIE_USER 2 diff --git a/include/dt-bindings/clock/samsung,exynosautov920.h b/include/dt-bindings/clock/samsung,exynosautov920.h new file mode 100644 index 000000000000..c720f344b6bf --- /dev/null +++ b/include/dt-bindings/clock/samsung,exynosautov920.h @@ -0,0 +1,191 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) 2024 Samsung Electronics Co., Ltd. + * Author: Sunyeal Hong <sunyeal.hong@samsung.com> + * + * Device Tree binding constants for ExynosAuto v920 clock controller. + */ + +#ifndef _DT_BINDINGS_CLOCK_EXYNOSAUTOV920_H +#define _DT_BINDINGS_CLOCK_EXYNOSAUTOV920_H + +/* CMU_TOP */ +#define FOUT_SHARED0_PLL 1 +#define FOUT_SHARED1_PLL 2 +#define FOUT_SHARED2_PLL 3 +#define FOUT_SHARED3_PLL 4 +#define FOUT_SHARED4_PLL 5 +#define FOUT_SHARED5_PLL 6 +#define FOUT_MMC_PLL 7 + +/* MUX in CMU_TOP */ +#define MOUT_SHARED0_PLL 8 +#define MOUT_SHARED1_PLL 9 +#define MOUT_SHARED2_PLL 10 +#define MOUT_SHARED3_PLL 11 +#define MOUT_SHARED4_PLL 12 +#define MOUT_SHARED5_PLL 13 +#define MOUT_MMC_PLL 14 +#define MOUT_CLKCMU_CMU_BOOST 15 +#define MOUT_CLKCMU_CMU_CMUREF 16 +#define MOUT_CLKCMU_ACC_NOC 17 +#define MOUT_CLKCMU_ACC_ORB 18 +#define MOUT_CLKCMU_APM_NOC 19 +#define MOUT_CLKCMU_AUD_CPU 20 +#define MOUT_CLKCMU_AUD_NOC 21 +#define MOUT_CLKCMU_CPUCL0_SWITCH 22 +#define MOUT_CLKCMU_CPUCL0_CLUSTER 23 +#define MOUT_CLKCMU_CPUCL0_DBG 24 +#define MOUT_CLKCMU_CPUCL1_SWITCH 25 +#define MOUT_CLKCMU_CPUCL1_CLUSTER 26 +#define MOUT_CLKCMU_CPUCL2_SWITCH 27 +#define MOUT_CLKCMU_CPUCL2_CLUSTER 28 +#define MOUT_CLKCMU_DNC_NOC 29 +#define MOUT_CLKCMU_DPTX_NOC 30 +#define MOUT_CLKCMU_DPTX_DPGTC 31 +#define MOUT_CLKCMU_DPTX_DPOSC 32 +#define MOUT_CLKCMU_DPUB_NOC 33 +#define MOUT_CLKCMU_DPUB_DSIM 34 +#define MOUT_CLKCMU_DPUF0_NOC 35 +#define MOUT_CLKCMU_DPUF1_NOC 36 +#define MOUT_CLKCMU_DPUF2_NOC 37 +#define MOUT_CLKCMU_DSP_NOC 38 +#define MOUT_CLKCMU_G3D_SWITCH 39 +#define MOUT_CLKCMU_G3D_NOCP 40 +#define MOUT_CLKCMU_GNPU_NOC 41 +#define MOUT_CLKCMU_HSI0_NOC 42 +#define MOUT_CLKCMU_HSI1_NOC 43 +#define MOUT_CLKCMU_HSI1_USBDRD 44 +#define MOUT_CLKCMU_HSI1_MMC_CARD 45 +#define MOUT_CLKCMU_HSI2_NOC 46 +#define MOUT_CLKCMU_HSI2_NOC_UFS 47 +#define MOUT_CLKCMU_HSI2_UFS_EMBD 48 +#define MOUT_CLKCMU_HSI2_ETHERNET 49 +#define MOUT_CLKCMU_ISP_NOC 50 +#define MOUT_CLKCMU_M2M_NOC 51 +#define MOUT_CLKCMU_M2M_JPEG 52 +#define MOUT_CLKCMU_MFC_MFC 53 +#define MOUT_CLKCMU_MFC_WFD 54 +#define MOUT_CLKCMU_MFD_NOC 55 +#define MOUT_CLKCMU_MIF_SWITCH 56 +#define MOUT_CLKCMU_MIF_NOCP 57 +#define MOUT_CLKCMU_MISC_NOC 58 +#define MOUT_CLKCMU_NOCL0_NOC 59 +#define MOUT_CLKCMU_NOCL1_NOC 60 +#define MOUT_CLKCMU_NOCL2_NOC 61 +#define MOUT_CLKCMU_PERIC0_NOC 62 +#define MOUT_CLKCMU_PERIC0_IP 63 +#define MOUT_CLKCMU_PERIC1_NOC 64 +#define MOUT_CLKCMU_PERIC1_IP 65 +#define MOUT_CLKCMU_SDMA_NOC 66 +#define MOUT_CLKCMU_SNW_NOC 67 +#define MOUT_CLKCMU_SSP_NOC 68 +#define MOUT_CLKCMU_TAA_NOC 69 + +/* DIV in CMU_TOP */ +#define DOUT_SHARED0_DIV1 70 +#define DOUT_SHARED0_DIV2 71 +#define DOUT_SHARED0_DIV3 72 +#define DOUT_SHARED0_DIV4 73 +#define DOUT_SHARED1_DIV1 74 +#define DOUT_SHARED1_DIV2 75 +#define DOUT_SHARED1_DIV3 76 +#define DOUT_SHARED1_DIV4 77 +#define DOUT_SHARED2_DIV1 78 +#define DOUT_SHARED2_DIV2 79 +#define DOUT_SHARED2_DIV3 80 +#define DOUT_SHARED2_DIV4 81 +#define DOUT_SHARED3_DIV1 82 +#define DOUT_SHARED3_DIV2 83 +#define DOUT_SHARED3_DIV3 84 +#define DOUT_SHARED3_DIV4 85 +#define DOUT_SHARED4_DIV1 86 +#define DOUT_SHARED4_DIV2 87 +#define DOUT_SHARED4_DIV3 88 +#define DOUT_SHARED4_DIV4 89 +#define DOUT_SHARED5_DIV1 90 +#define DOUT_SHARED5_DIV2 91 +#define DOUT_SHARED5_DIV3 92 +#define DOUT_SHARED5_DIV4 93 +#define DOUT_CLKCMU_CMU_BOOST 94 +#define DOUT_CLKCMU_ACC_NOC 95 +#define DOUT_CLKCMU_ACC_ORB 96 +#define DOUT_CLKCMU_APM_NOC 97 +#define DOUT_CLKCMU_AUD_CPU 98 +#define DOUT_CLKCMU_AUD_NOC 99 +#define DOUT_CLKCMU_CPUCL0_SWITCH 100 +#define DOUT_CLKCMU_CPUCL0_CLUSTER 101 +#define DOUT_CLKCMU_CPUCL0_DBG 102 +#define DOUT_CLKCMU_CPUCL1_SWITCH 103 +#define DOUT_CLKCMU_CPUCL1_CLUSTER 104 +#define DOUT_CLKCMU_CPUCL2_SWITCH 105 +#define DOUT_CLKCMU_CPUCL2_CLUSTER 106 +#define DOUT_CLKCMU_DNC_NOC 107 +#define DOUT_CLKCMU_DPTX_NOC 108 +#define DOUT_CLKCMU_DPTX_DPGTC 109 +#define DOUT_CLKCMU_DPTX_DPOSC 110 +#define DOUT_CLKCMU_DPUB_NOC 111 +#define DOUT_CLKCMU_DPUB_DSIM 112 +#define DOUT_CLKCMU_DPUF0_NOC 113 +#define DOUT_CLKCMU_DPUF1_NOC 114 +#define DOUT_CLKCMU_DPUF2_NOC 115 +#define DOUT_CLKCMU_DSP_NOC 116 +#define DOUT_CLKCMU_G3D_SWITCH 117 +#define DOUT_CLKCMU_G3D_NOCP 118 +#define DOUT_CLKCMU_GNPU_NOC 119 +#define DOUT_CLKCMU_HSI0_NOC 120 +#define DOUT_CLKCMU_HSI1_NOC 121 +#define DOUT_CLKCMU_HSI1_USBDRD 122 +#define DOUT_CLKCMU_HSI1_MMC_CARD 123 +#define DOUT_CLKCMU_HSI2_NOC 124 +#define DOUT_CLKCMU_HSI2_NOC_UFS 125 +#define DOUT_CLKCMU_HSI2_UFS_EMBD 126 +#define DOUT_CLKCMU_HSI2_ETHERNET 127 +#define DOUT_CLKCMU_ISP_NOC 128 +#define DOUT_CLKCMU_M2M_NOC 129 +#define DOUT_CLKCMU_M2M_JPEG 130 +#define DOUT_CLKCMU_MFC_MFC 131 +#define DOUT_CLKCMU_MFC_WFD 132 +#define DOUT_CLKCMU_MFD_NOC 133 +#define DOUT_CLKCMU_MIF_NOCP 134 +#define DOUT_CLKCMU_MISC_NOC 135 +#define DOUT_CLKCMU_NOCL0_NOC 136 +#define DOUT_CLKCMU_NOCL1_NOC 137 +#define DOUT_CLKCMU_NOCL2_NOC 138 +#define DOUT_CLKCMU_PERIC0_NOC 139 +#define DOUT_CLKCMU_PERIC0_IP 140 +#define DOUT_CLKCMU_PERIC1_NOC 141 +#define DOUT_CLKCMU_PERIC1_IP 142 +#define DOUT_CLKCMU_SDMA_NOC 143 +#define DOUT_CLKCMU_SNW_NOC 144 +#define DOUT_CLKCMU_SSP_NOC 145 +#define DOUT_CLKCMU_TAA_NOC 146 + +/* CMU_PERIC0 */ +#define CLK_MOUT_PERIC0_IP_USER 1 +#define CLK_MOUT_PERIC0_NOC_USER 2 +#define CLK_MOUT_PERIC0_USI00_USI 3 +#define CLK_MOUT_PERIC0_USI01_USI 4 +#define CLK_MOUT_PERIC0_USI02_USI 5 +#define CLK_MOUT_PERIC0_USI03_USI 6 +#define CLK_MOUT_PERIC0_USI04_USI 7 +#define CLK_MOUT_PERIC0_USI05_USI 8 +#define CLK_MOUT_PERIC0_USI06_USI 9 +#define CLK_MOUT_PERIC0_USI07_USI 10 +#define CLK_MOUT_PERIC0_USI08_USI 11 +#define CLK_MOUT_PERIC0_USI_I2C 12 +#define CLK_MOUT_PERIC0_I3C 13 + +#define CLK_DOUT_PERIC0_USI00_USI 14 +#define CLK_DOUT_PERIC0_USI01_USI 15 +#define CLK_DOUT_PERIC0_USI02_USI 16 +#define CLK_DOUT_PERIC0_USI03_USI 17 +#define CLK_DOUT_PERIC0_USI04_USI 18 +#define CLK_DOUT_PERIC0_USI05_USI 19 +#define CLK_DOUT_PERIC0_USI06_USI 20 +#define CLK_DOUT_PERIC0_USI07_USI 21 +#define CLK_DOUT_PERIC0_USI08_USI 22 +#define CLK_DOUT_PERIC0_USI_I2C 23 +#define CLK_DOUT_PERIC0_I3C 24 + +#endif /* _DT_BINDINGS_CLOCK_EXYNOSAUTOV920_H */ diff --git a/include/dt-bindings/interconnect/qcom,ipq5332.h b/include/dt-bindings/interconnect/qcom,ipq5332.h new file mode 100644 index 000000000000..16475bb07a48 --- /dev/null +++ b/include/dt-bindings/interconnect/qcom,ipq5332.h @@ -0,0 +1,46 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +#ifndef INTERCONNECT_QCOM_IPQ5332_H +#define INTERCONNECT_QCOM_IPQ5332_H + +#define MASTER_SNOC_PCIE3_1_M 0 +#define SLAVE_SNOC_PCIE3_1_M 1 +#define MASTER_ANOC_PCIE3_1_S 2 +#define SLAVE_ANOC_PCIE3_1_S 3 +#define MASTER_SNOC_PCIE3_2_M 4 +#define SLAVE_SNOC_PCIE3_2_M 5 +#define MASTER_ANOC_PCIE3_2_S 6 +#define SLAVE_ANOC_PCIE3_2_S 7 +#define MASTER_SNOC_USB 8 +#define SLAVE_SNOC_USB 9 +#define MASTER_NSSNOC_NSSCC 10 +#define SLAVE_NSSNOC_NSSCC 11 +#define MASTER_NSSNOC_SNOC_0 12 +#define SLAVE_NSSNOC_SNOC_0 13 +#define MASTER_NSSNOC_SNOC_1 14 +#define SLAVE_NSSNOC_SNOC_1 15 +#define MASTER_NSSNOC_ATB 16 +#define SLAVE_NSSNOC_ATB 17 +#define MASTER_NSSNOC_PCNOC_1 18 +#define SLAVE_NSSNOC_PCNOC_1 19 +#define MASTER_NSSNOC_QOSGEN_REF 20 +#define SLAVE_NSSNOC_QOSGEN_REF 21 +#define MASTER_NSSNOC_TIMEOUT_REF 22 +#define SLAVE_NSSNOC_TIMEOUT_REF 23 +#define MASTER_NSSNOC_XO_DCD 24 +#define SLAVE_NSSNOC_XO_DCD 25 + +#define MASTER_NSSNOC_PPE 0 +#define SLAVE_NSSNOC_PPE 1 +#define MASTER_NSSNOC_PPE_CFG 2 +#define SLAVE_NSSNOC_PPE_CFG 3 +#define MASTER_NSSNOC_NSS_CSR 4 +#define SLAVE_NSSNOC_NSS_CSR 5 +#define MASTER_NSSNOC_CE_APB 6 +#define SLAVE_NSSNOC_CE_APB 7 +#define MASTER_NSSNOC_CE_AXI 8 +#define SLAVE_NSSNOC_CE_AXI 9 + +#define MASTER_CNOC_AHB 0 +#define SLAVE_CNOC_AHB 1 + +#endif /* INTERCONNECT_QCOM_IPQ5332_H */ diff --git a/include/dt-bindings/mailbox/qcom-ipcc.h b/include/dt-bindings/mailbox/qcom-ipcc.h index fbfa3febc66d..fd85a79381b3 100644 --- a/include/dt-bindings/mailbox/qcom-ipcc.h +++ b/include/dt-bindings/mailbox/qcom-ipcc.h @@ -33,5 +33,7 @@ #define IPCC_CLIENT_NSP1 18 #define IPCC_CLIENT_TME 23 #define IPCC_CLIENT_WPSS 24 +#define IPCC_CLIENT_GPDSP0 31 +#define IPCC_CLIENT_GPDSP1 32 #endif |