summaryrefslogtreecommitdiff
path: root/arch/riscv/kernel
AgeCommit message (Collapse)AuthorFilesLines
2023-12-15Merge tag 'mm-hotfixes-stable-2023-12-15-07-11' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "17 hotfixes. 8 are cc:stable and the other 9 pertain to post-6.6 issues" * tag 'mm-hotfixes-stable-2023-12-15-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm/mglru: reclaim offlined memcgs harder mm/mglru: respect min_ttl_ms with memcgs mm/mglru: try to stop at high watermarks mm/mglru: fix underprotected page cache mm/shmem: fix race in shmem_undo_range w/THP Revert "selftests: error out if kernel header files are not yet built" crash_core: fix the check for whether crashkernel is from high memory x86, kexec: fix the wrong ifdeffery CONFIG_KEXEC sh, kexec: fix the incorrect ifdeffery and dependency of CONFIG_KEXEC mips, kexec: fix the incorrect ifdeffery and dependency of CONFIG_KEXEC m68k, kexec: fix the incorrect ifdeffery and build dependency of CONFIG_KEXEC loongarch, kexec: change dependency of object files mm/damon/core: make damon_start() waits until kdamond_fn() starts selftests/mm: cow: print ksft header before printing anything else mm: fix VMA heap bounds checking riscv: fix VMALLOC_START definition kexec: drop dependency on ARCH_SUPPORTS_KEXEC from CRASH_DUMP
2023-12-12kexec: drop dependency on ARCH_SUPPORTS_KEXEC from CRASH_DUMPIgnat Korchagin1-1/+3
In commit f8ff23429c62 ("kernel/Kconfig.kexec: drop select of KEXEC for CRASH_DUMP") we tried to fix a config regression, where CONFIG_CRASH_DUMP required CONFIG_KEXEC. However, it was not enough at least for arm64 platforms. While further testing the patch with our arm64 config I noticed that CONFIG_CRASH_DUMP is unavailable in menuconfig. This is because CONFIG_CRASH_DUMP still depends on the new CONFIG_ARCH_SUPPORTS_KEXEC introduced in commit 91506f7e5d21 ("arm64/kexec: refactor for kernel/Kconfig.kexec") and on arm64 CONFIG_ARCH_SUPPORTS_KEXEC requires CONFIG_PM_SLEEP_SMP=y, which in turn requires either CONFIG_SUSPEND=y or CONFIG_HIBERNATION=y neither of which are set in our config. Given that we already established that CONFIG_KEXEC (which is a switch for kexec system call itself) is not required for CONFIG_CRASH_DUMP drop CONFIG_ARCH_SUPPORTS_KEXEC dependency as well. The arm64 kernel builds just fine with CONFIG_CRASH_DUMP=y and with both CONFIG_KEXEC=n and CONFIG_KEXEC_FILE=n after f8ff23429c62 ("kernel/Kconfig.kexec: drop select of KEXEC for CRASH_DUMP") and this patch are applied given that the necessary shared bits are included via CONFIG_KEXEC_CORE dependency. [bhe@redhat.com: don't export some symbols when CONFIG_MMU=n] Link: https://lkml.kernel.org/r/ZW03ODUKGGhP1ZGU@MiWiFi-R3L-srv [bhe@redhat.com: riscv, kexec: fix dependency of two items] Link: https://lkml.kernel.org/r/ZW04G/SKnhbE5mnX@MiWiFi-R3L-srv Link: https://lkml.kernel.org/r/20231129220409.55006-1-ignat@cloudflare.com Fixes: 91506f7e5d21 ("arm64/kexec: refactor for kernel/Kconfig.kexec") Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Signed-off-by: Baoquan He <bhe@redhat.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: <stable@vger.kernel.org> # 6.6+: f8ff234: kernel/Kconfig.kexec: drop select of KEXEC for CRASH_DUMP Cc: <stable@vger.kernel.org> # 6.6+ Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-06riscv: Fix SMP when shadow call stacks are enabledSamuel Holland1-1/+1
This fixes two bugs in SCS initialization for secondary CPUs. First, the SCS was not initialized at all in the spinwait boot path. Second, the code for the SBI HSM path attempted to initialize the SCS before enabling the MMU. However, that involves dereferencing the thread pointer, which requires the MMU to be enabled. Fix both issues by setting up the SCS in the common secondary entry path, after enabling the MMU. Fixes: d1584d791a29 ("riscv: Implement Shadow Call Stack") Signed-off-by: Samuel Holland <samuel.holland@sifive.com> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Link: https://lore.kernel.org/r/20231121211958.3158576-1-samuel.holland@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-12-06riscv: fix misaligned access handling of C.SWSP and C.SDSPClément Léger1-4/+2
This is a backport of a fix that was done in OpenSBI: ec0559eb315b ("lib: sbi_misaligned_ldst: Fix handling of C.SWSP and C.SDSP"). Unlike C.LWSP/C.LDSP, these encodings can be used with the zero register, so checking that the rs2 field is non-zero is unnecessary. Additionally, the previous check was incorrect since it was checking the immediate field of the instruction instead of the rs2 field. Fixes: 956d705dd279 ("riscv: Unaligned load/store handling for M_MODE") Signed-off-by: Clément Léger <cleger@rivosinc.com> Link: https://lore.kernel.org/r/20231103090223.702340-1-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-12-06RISC-V: hwprobe: Always use u64 for extension bitsAndrew Jones1-1/+1
Extensions are getting added quickly and their hwprobe bits will soon exceed 31 (which pair values accommodate, since they're of type u64). However, in one tree, where a bunch of extensions got merged prior to zicboz, zicboz already got pushed to bit 32. Pushing it exposed a 32-bit compilation bug, since unsigned long was used instead of u64. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202310311801.hxduISrr-lkp@intel.com/ Fixes: 9c7646d5ffd2 ("RISC-V: hwprobe: Expose Zicboz extension and its block size") Signed-off-by: Andrew Jones <ajones@ventanamicro.com> Link: https://lore.kernel.org/r/20231101141908.192198-2-ajones@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-12-06Support rv32 ULEB128 testCharlie Jenkins1-4/+4
Use opcodes available to both rv32 and rv64 in uleb128 module linking test. Fixes: af71bc194916 ("riscv: Add tests for riscv module loading") Signed-off-by: Charlie Jenkins <charlie@rivosinc.com> Reported-by: Randy Dunlap <rdunlap@infradead.org> Closes: https://lore.kernel.org/lkml/1d7c71ee-5742-4df4-b8ef-a2aea0a624eb@infradead.org/ Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Link: https://lore.kernel.org/r/20231122-module_fixup-v2-1-dfb9565e9ea5@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-12-04riscv: Correct type casting in module loadingCharlie Jenkins1-2/+2
Use __le16 with le16_to_cpu. Fixes: 8fd6c5142395 ("riscv: Add remaining module relocations") Signed-off-by: Charlie Jenkins <charlie@rivosinc.com> Reviewed-by: Samuel Holland <samuel.holland@sifive.com> Tested-by: Samuel Holland <samuel.holland@sifive.com> Tested-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20231127-module_linking_freeing-v4-2-a2ca1d7027d0@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-12-04riscv: Safely remove entries from relocation listCharlie Jenkins1-28/+82
Use the safe versions of list and hlist iteration to safely remove entries from the module relocation lists. To allow mutliple threads to load modules concurrently, move relocation list pointers onto the stack rather than using global variables. Fixes: 8fd6c5142395 ("riscv: Add remaining module relocations") Reported-by: Ron Economos <re@w6rz.net> Closes: https://lore.kernel.org/linux-riscv/444de86a-7e7c-4de7-5d1d-c1c40eefa4ba@w6rz.net Signed-off-by: Charlie Jenkins <charlie@rivosinc.com> Tested-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20231127-module_linking_freeing-v4-1-a2ca1d7027d0@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-10Merge tag 'riscv-for-linus-6.7-mw2' of ↵Linus Torvalds40-336/+1599
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: - Support for handling misaligned accesses in S-mode - Probing for misaligned access support is now properly cached and handled in parallel - PTDUMP now reflects the SW reserved bits, as well as the PBMT and NAPOT extensions - Performance improvements for TLB flushing - Support for many new relocations in the module loader - Various bug fixes and cleanups * tag 'riscv-for-linus-6.7-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits) riscv: Optimize bitops with Zbb extension riscv: Rearrange hwcap.h and cpufeature.h drivers: perf: Do not broadcast to other cpus when starting a counter drivers: perf: Check find_first_bit() return value of: property: Add fw_devlink support for msi-parent RISC-V: Don't fail in riscv_of_parent_hartid() for disabled HARTs riscv: Fix set_memory_XX() and set_direct_map_XX() by splitting huge linear mappings riscv: Don't use PGD entries for the linear mapping RISC-V: Probe misaligned access speed in parallel RISC-V: Remove __init on unaligned_emulation_finish() RISC-V: Show accurate per-hart isa in /proc/cpuinfo RISC-V: Don't rely on positional structure initialization riscv: Add tests for riscv module loading riscv: Add remaining module relocations riscv: Avoid unaligned access when relocating modules riscv: split cache ops out of dma-noncoherent.c riscv: Improve flush_tlb_kernel_range() riscv: Make __flush_tlb_range() loop over pte instead of flushing the whole tlb riscv: Improve flush_tlb_range() for hugetlb pages riscv: Improve tlb_flush() ...
2023-11-09Merge patch "drivers: perf: Do not broadcast to other cpus when starting a ↵Palmer Dabbelt4-32/+20
counter" This is really just a single patch, but since the offending fix hasn't yet made it to my for-next I'm merging it here. Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-08Merge patch series "Linux RISC-V AIA Preparatory Series"Palmer Dabbelt1-5/+6
These two ended up in the AIA series, but they're really independent improvements. * b4-shazam-merge: of: property: Add fw_devlink support for msi-parent RISC-V: Don't fail in riscv_of_parent_hartid() for disabled HARTs Link: https://lore.kernel.org/r/20231027154254.355853-1-apatel@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-08RISC-V: Don't fail in riscv_of_parent_hartid() for disabled HARTsAnup Patel1-5/+6
The riscv_of_processor_hartid() used by riscv_of_parent_hartid() fails for HARTs disabled in the DT. This results in the following warning thrown by the RISC-V INTC driver for the E-core on SiFive boards: [ 0.000000] riscv-intc: unable to find hart id for /cpus/cpu@0/interrupt-controller The riscv_of_parent_hartid() is only expected to read the hartid from the DT so we directly call of_get_cpu_hwid() instead of calling riscv_of_processor_hartid(). Fixes: ad635e723e17 ("riscv: cpu: Add 64bit hartid support on RV64") Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Link: https://lore.kernel.org/r/20231027154254.355853-2-apatel@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-08Merge tag 'riscv-for-linus-6.7-rc1' of ↵Linus Torvalds14-222/+275
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: - Support for cbo.zero in userspace - Support for CBOs on ACPI-based systems - A handful of improvements for the T-Head cache flushing ops - Support for software shadow call stacks - Various cleanups and fixes * tag 'riscv-for-linus-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (31 commits) RISC-V: hwprobe: Fix vDSO SIGSEGV riscv: configs: defconfig: Enable configs required for RZ/Five SoC riscv: errata: prefix T-Head mnemonics with th. riscv: put interrupt entries into .irqentry.text riscv: mm: Update the comment of CONFIG_PAGE_OFFSET riscv: Using TOOLCHAIN_HAS_ZIHINTPAUSE marco replace zihintpause riscv/mm: Fix the comment for swap pte format RISC-V: clarify the QEMU workaround in ISA parser riscv: correct pt_level name via pgtable_l5/4_enabled RISC-V: Provide pgtable_l5_enabled on rv32 clocksource: timer-riscv: Increase rating of clock_event_device for Sstc clocksource: timer-riscv: Don't enable/disable timer interrupt lkdtm: Fix CFI_BACKWARD on RISC-V riscv: Use separate IRQ shadow call stacks riscv: Implement Shadow Call Stack riscv: Move global pointer loading to a macro riscv: Deduplicate IRQ stack switching riscv: VMAP_STACK overflow detection thread-safe RISC-V: cacheflush: Initialize CBO variables on ACPI systems RISC-V: ACPI: RHCT: Add function to get CBO block sizes ...
2023-11-07RISC-V: Probe misaligned access speed in parallelEvan Green2-20/+77
Probing for misaligned access speed takes about 0.06 seconds. On a system with 64 cores, doing this in smp_callin() means it's done serially, extending boot time by 3.8 seconds. That's a lot of boot time. Instead of measuring each CPU serially, let's do the measurements on all CPUs in parallel. If we disable preemption on all CPUs, the jiffies stop ticking, so we can do this in stages of 1) everybody except core 0, then 2) core 0. The allocations are all done outside of on_each_cpu() to avoid calling alloc_pages() with interrupts disabled. For hotplugged CPUs that come in after the boot time measurement, register CPU hotplug callbacks, and do the measurement there. Interrupts are enabled in those callbacks, so they're fine to do alloc_pages() in. Reported-by: Jisheng Zhang <jszhang@kernel.org> Closes: https://lore.kernel.org/all/mhng-9359993d-6872-4134-83ce-c97debe1cf9a@palmer-ri-x1c9/T/#mae9b8f40016f9df428829d33360144dc5026bcbf Fixes: 584ea6564bca ("RISC-V: Probe for unaligned access speed") Signed-off-by: Evan Green <evan@rivosinc.com> Link: https://lore.kernel.org/r/20231106225855.3121724-1-evan@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-07RISC-V: Remove __init on unaligned_emulation_finish()Evan Green1-1/+1
This function shouldn't be __init, since it's called during hotplug. The warning says it well enough: WARNING: modpost: vmlinux: section mismatch in reference: check_unaligned_access_all_cpus+0x13a (section: .text) -> unaligned_emulation_finish (section: .init.text) Signed-off-by: Evan Green <evan@rivosinc.com> Fixes: 71c54b3d169d ("riscv: report misaligned accesses emulation to hwprobe") Link: https://lore.kernel.org/r/20231106231105.3141413-1-evan@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-07RISC-V: Show accurate per-hart isa in /proc/cpuinfoEvan Green1-4/+18
In /proc/cpuinfo, most of the information we show for each processor is specific to that hart: marchid, mvendorid, mimpid, processor, hart, compatible, and the mmu size. But the ISA string gets filtered through a lowest common denominator mask, so that if one CPU is missing an ISA extension, no CPUs will show it. Now that we track the ISA extensions for each hart, let's report ISA extension info accurately per-hart in /proc/cpuinfo. We cannot change the "isa:" line, as usermode may be relying on that line to show only the common set of extensions supported across all harts. Add a new "hart isa" line instead, which reports the true set of extensions for that hart. Signed-off-by: Evan Green <evan@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20231106232439.3176268-1-evan@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-07RISC-V: Don't rely on positional structure initializationPalmer Dabbelt1-60/+65
Without this I get a bunch of warnings along the lines of arch/riscv/kernel/module.c:535:26: error: positional initialization of field in 'struct' declared with 'designated_init' attribute [-Werror=designated-init] 535 | [R_RISCV_32] = { apply_r_riscv_32_rela }, This just mades the member initializers explicit instead of positional. I also aligned some of the table, but mostly just to make the batch editing go faster. Fixes: b51fc88cb35e ("Merge patch series "riscv: Add remaining module relocations and tests"") Reviewed-by: Charlie Jenkins <charlie@rivosinc.com> Link: https://lore.kernel.org/r/20231107155529.8368-1-palmer@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-07Merge patch series "riscv: Add remaining module relocations and tests"Palmer Dabbelt16-104/+864
Charlie Jenkins <charlie@rivosinc.com> says: A handful of module relocations were missing, this patch includes the remaining ones. I also wrote some test cases to ensure that module loading works properly. Some relocations cannot be supported in the kernel, these include the ones that rely on thread local storage and dynamic linking. This patch also overhauls the implementation of ADD/SUB/SET/ULEB128 relocations to handle overflow. "Overflow" is different for ULEB128 since it is a variable-length encoding that the compiler can be expected to generate enough space for. Instead of overflowing, ULEB128 will expand into the next 8-bit segment of the location. A psABI proposal [1] was merged that mandates that SET_ULEB128 and SUB_ULEB128 are paired, however the discussion following the merging of the pull request revealed that while the pull request was valid, it would be better for linkers to properly handle this overflow. This patch proactively implements this methodology for future compatibility. This can be tested by enabling KUNIT, RUNTIME_KERNEL_TESTING_MENU, and RISCV_MODULE_LINKING_KUNIT. [1] https://github.com/riscv-non-isa/riscv-elf-psabi-doc/pull/403 * b4-shazam-merge: riscv: Add tests for riscv module loading riscv: Add remaining module relocations riscv: Avoid unaligned access when relocating modules Link: https://lore.kernel.org/r/20231101-module_relocations-v9-0-8dfa3483c400@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-07riscv: Add tests for riscv module loadingCharlie Jenkins15-0/+365
Add test cases for the two main groups of relocations added: SUB and SET, along with uleb128. Signed-off-by: Charlie Jenkins <charlie@rivosinc.com> Link: https://lore.kernel.org/r/20231101-module_relocations-v9-3-8dfa3483c400@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-07riscv: Add remaining module relocationsCharlie Jenkins1-29/+419
Add all final module relocations and add error logs explaining the ones that are not supported. Implement overflow checks for ADD/SUB/SET/ULEB128 relocations. Signed-off-by: Charlie Jenkins <charlie@rivosinc.com> Link: https://lore.kernel.org/r/20231101-module_relocations-v9-2-8dfa3483c400@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-07riscv: Avoid unaligned access when relocating modulesEmil Renner Berthing1-76/+81
With the C-extension regular 32bit instructions are not necessarily aligned on 4-byte boundaries. RISC-V instructions are in fact an ordered list of 16bit little-endian "parcels", so access the instruction as such. This should also make the code work in case someone builds a big-endian RISC-V machine. Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Signed-off-by: Charlie Jenkins <charlie@rivosinc.com> Link: https://lore.kernel.org/r/20231101-module_relocations-v9-1-8dfa3483c400@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-06riscv: kernel: Use correct SYM_DATA_*() macro for dataClément Léger1-5/+4
Some data were incorrectly annotated with SYM_FUNC_*() instead of SYM_DATA_*() ones. Use the correct ones. Signed-off-by: Clément Léger <cleger@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Link: https://lore.kernel.org/r/20231024132655.730417-4-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-06riscv: Use SYM_*() assembly macros instead of deprecated onesClément Léger12-48/+44
ENTRY()/END()/WEAK() macros are deprecated and we should make use of the new SYM_*() macros [1] for better annotation of symbols. Replace the deprecated ones with the new ones and fix wrong usage of END()/ENDPROC() to correctly describe the symbols. [1] https://docs.kernel.org/core-api/asm-annotations.html Signed-off-by: Clément Léger <cleger@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Link: https://lore.kernel.org/r/20231024132655.730417-3-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-06riscv: use ".L" local labels in assembly when applicableClément Léger3-17/+17
For the sake of coherency, use local labels in assembly when applicable. This also avoid kprobes being confused when applying a kprobe since the size of function is computed by checking where the next visible symbol is located. This might end up in computing some function size to be way shorter than expected and thus failing to apply kprobes to the specified offset. Signed-off-by: Clément Léger <cleger@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Link: https://lore.kernel.org/r/20231024132655.730417-2-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-06Merge patch series "riscv: tlb flush improvements"Palmer Dabbelt1-22/+10
Alexandre Ghiti <alexghiti@rivosinc.com> says: This series optimizes the tlb flushes on riscv which used to simply flush the whole tlb whatever the size of the range to flush or the size of the stride. Patch 3 introduces a threshold that is microarchitecture specific and will very likely be modified by vendors, not sure though which mechanism we'll use to do that (dt? alternatives? vendor initialization code?). * b4-shazam-merge: riscv: Improve flush_tlb_kernel_range() riscv: Make __flush_tlb_range() loop over pte instead of flushing the whole tlb riscv: Improve flush_tlb_range() for hugetlb pages riscv: Improve tlb_flush() Link: https://lore.kernel.org/r/20231030133027.19542-1-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-06riscv: Make __flush_tlb_range() loop over pte instead of flushing the whole tlbAlexandre Ghiti1-22/+10
Currently, when the range to flush covers more than one page (a 4K page or a hugepage), __flush_tlb_range() flushes the whole tlb. Flushing the whole tlb comes with a greater cost than flushing a single entry so we should flush single entries up to a certain threshold so that: threshold * cost of flushing a single entry < cost of flushing the whole tlb. Co-developed-by: Mayuresh Chitale <mchitale@ventanamicro.com> Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com> Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # On RZ/Five SMARC Reviewed-by: Samuel Holland <samuel.holland@sifive.com> Tested-by: Samuel Holland <samuel.holland@sifive.com> Link: https://lore.kernel.org/r/20231030133027.19542-4-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-05Merge patch series "riscv: vdso.lds.S: some improvement"Palmer Dabbelt1-17/+13
Jisheng Zhang <jszhang@kernel.org> says: This series renews one of my last year RFC patch[1], tries to improve the vdso layout a bit. patch1 removes useless symbols patch2 merges .data section of vdso into .rodata because they are readonly patch3 is the real renew patch, it removes hardcoded 0x800 .text start addr. But I rewrite the commit msg per Andrew's suggestions and move move .note, .eh_frame_hdr, and .eh_frame between .rodata and .text to keep the actual code well away from the non-instruction data. * b4-shazam-merge: riscv: vdso.lds.S: remove hardcoded 0x800 .text start addr riscv: vdso.lds.S: merge .data section into .rodata section riscv: vdso.lds.S: drop __alt_start and __alt_end symbols Link: https://lore.kernel.org/linux-riscv/20221123161805.1579-1-jszhang@kernel.org/ [1] Link: https://lore.kernel.org/r/20230912072015.2424-1-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-05riscv: vdso.lds.S: remove hardcoded 0x800 .text start addrJisheng Zhang1-9/+8
I believe the hardcoded 0x800 and related comments come from the long history VDSO_TEXT_OFFSET in x86 vdso code, but commit 5b9304933730 ("x86 vDSO: generate vdso-syms.lds") and commit f6b46ebf904f ("x86 vDSO: new layout") removes the comment and hard coding for x86. Similar as x86 and other arch, riscv doesn't need the rigid layout using VDSO_TEXT_OFFSET since it "no longer matters to the kernel". so we could remove the hard coding now, and removing it brings a small vdso.so and aligns with other architectures. Also, having enough separation between data and text is important for I-cache, so similar as x86, move .note, .eh_frame_hdr, and .eh_frame between .rodata and .text. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Tested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Link: https://lore.kernel.org/r/20230912072015.2424-4-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-05riscv: vdso.lds.S: merge .data section into .rodata sectionJisheng Zhang1-8/+7
The .data section doesn't need to be separate from .rodata section, they are both readonly. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Tested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Link: https://lore.kernel.org/r/20230912072015.2424-3-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-05riscv: vdso.lds.S: drop __alt_start and __alt_end symbolsJisheng Zhang1-2/+0
These two symbols are not used, remove them. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Tested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Link: https://lore.kernel.org/r/20230912072015.2424-2-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-05riscv: add userland instruction dump to RISC-V splatsYunhui Cui1-3/+18
Add userland instruction dump and rename dump_kernel_instr() to dump_instr(). An example: [ 0.822439] Freeing unused kernel image (initmem) memory: 6916K [ 0.823817] Run /init as init process [ 0.839411] init[1]: unhandled signal 4 code 0x1 at 0x000000000005be18 in bb[10000+5fb000] [ 0.840751] CPU: 0 PID: 1 Comm: init Not tainted 5.14.0-rc4-00049-gbd644290aa72-dirty #187 [ 0.841373] Hardware name: , BIOS [ 0.841743] epc : 000000000005be18 ra : 0000000000079e74 sp : 0000003fffcafda0 [ 0.842271] gp : ffffffff816e9dc8 tp : 0000000000000000 t0 : 0000000000000000 [ 0.842947] t1 : 0000003fffc9fdf0 t2 : 0000000000000000 s0 : 0000000000000000 [ 0.843434] s1 : 0000000000000000 a0 : 0000003fffca0190 a1 : 0000003fffcafe18 [ 0.843891] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000 [ 0.844357] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000000000000 [ 0.844803] s2 : 0000000000000000 s3 : 0000000000000000 s4 : 0000000000000000 [ 0.845253] s5 : 0000000000000000 s6 : 0000000000000000 s7 : 0000000000000000 [ 0.845722] s8 : 0000000000000000 s9 : 0000000000000000 s10: 0000000000000000 [ 0.846180] s11: 0000000000d144e0 t3 : 0000000000000000 t4 : 0000000000000000 [ 0.846616] t5 : 0000000000000000 t6 : 0000000000000000 [ 0.847204] status: 0000000200000020 badaddr: 00000000f0028053 cause: 0000000000000002 [ 0.848219] Code: f06f ff5f 3823 fa11 0113 fb01 2e23 0201 0293 0000 (8053) f002 [ 0.851016] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com> Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20230912021349.28302-1-cuiyunhui@bytedance.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-05riscv: kprobes: allow writing to x0Nam Cao1-1/+1
Instructions can write to x0, so we should simulate these instructions normally. Currently, the kernel hangs if an instruction who writes to x0 is simulated. Fixes: c22b0bcb1dd0 ("riscv: Add kprobes supported") Cc: stable@vger.kernel.org Signed-off-by: Nam Cao <namcaov@gmail.com> Reviewed-by: Charlie Jenkins <charlie@rivosinc.com> Acked-by: Guo Ren <guoren@kernel.org> Link: https://lore.kernel.org/r/20230829182500.61875-1-namcaov@gmail.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-05riscv: provide riscv-specific is_trap_insn()Nam Cao1-0/+6
uprobes expects is_trap_insn() to return true for any trap instructions, not just the one used for installing uprobe. The current default implementation only returns true for 16-bit c.ebreak if C extension is enabled. This can confuse uprobes if a 32-bit ebreak generates a trap exception from userspace: uprobes asks is_trap_insn() who says there is no trap, so uprobes assume a probe was there before but has been removed, and return to the trap instruction. This causes an infinite loop of entering and exiting trap handler. Instead of using the default implementation, implement this function speficially for riscv with checks for both ebreak and c.ebreak. Fixes: 74784081aac8 ("riscv: Add uprobes supported") Signed-off-by: Nam Cao <namcaov@gmail.com> Tested-by: Björn Töpel <bjorn@rivosinc.com> Reviewed-by: Guo Ren <guoren@kernel.org> Link: https://lore.kernel.org/r/20230829083614.117748-1-namcaov@gmail.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-05riscv: don't probe unaligned access speed if already doneJisheng Zhang1-0/+4
If misaligned_access_speed percpu var isn't so called "HWPROBE MISALIGNED UNKNOWN", it means the probe has happened(this is possible for example, hotplug off then hotplug on one cpu), and the percpu var has been set, don't probe again in this case. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Fixes: 584ea6564bca ("RISC-V: Probe for unaligned access speed") Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230912154040.3306-1-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-05riscv: signal: handle syscall restart before get_signalHaorong Lu1-39/+46
In the current riscv implementation, blocking syscalls like read() may not correctly restart after being interrupted by ptrace. This problem arises when the syscall restart process in arch_do_signal_or_restart() is bypassed due to changes to the regs->cause register, such as an ebreak instruction. Steps to reproduce: 1. Interrupt the tracee process with PTRACE_SEIZE & PTRACE_INTERRUPT. 2. Backup original registers and instruction at new_pc. 3. Change pc to new_pc, and inject an instruction (like ebreak) to this address. 4. Resume with PTRACE_CONT and wait for the process to stop again after executing ebreak. 5. Restore original registers and instructions, and detach from the tracee process. 6. Now the read() syscall in tracee will return -1 with errno set to ERESTARTSYS. Specifically, during an interrupt, the regs->cause changes from EXC_SYSCALL to EXC_BREAKPOINT due to the injected ebreak, which is inaccessible via ptrace so we cannot restore it. This alteration breaks the syscall restart condition and ends the read() syscall with an ERESTARTSYS error. According to include/linux/errno.h, it should never be seen by user programs. X86 can avoid this issue as it checks the syscall condition using a register (orig_ax) exposed to user space. Arm64 handles syscall restart before calling get_signal, where it could be paused and inspected by ptrace/debugger. This patch adjusts the riscv implementation to arm64 style, which also checks syscall using a kernel register (syscallno). It ensures the syscall restart process is not bypassed when changes to the cause register occur, providing more consistent behavior across various architectures. For a simplified reproduction program, feel free to visit: https://github.com/ancientmodern/riscv-ptrace-bug-demo. Signed-off-by: Haorong Lu <ancientmodern4@gmail.com> Link: https://lore.kernel.org/r/20230803224458.4156006-1-ancientmodern4@gmail.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-05Merge patch series "Add support to handle misaligned accesses in S-mode"Palmer Dabbelt7-59/+474
Clément Léger <cleger@rivosinc.com> says: Since commit 61cadb9 ("Provide new description of misaligned load/store behavior compatible with privileged architecture.") in the RISC-V ISA manual, it is stated that misaligned load/store might not be supported. However, the RISC-V kernel uABI describes that misaligned accesses are supported. In order to support that, this series adds support for S-mode handling of misaligned accesses as well support for prctl(PR_UNALIGN). Handling misaligned access in kernel allows for a finer grain control of the misaligned accesses behavior, and thanks to the prctl() call, can allow disabling misaligned access emulation to generate SIGBUS. User space can then optimize its software by removing such access based on SIGBUS generation. This series is useful when using a SBI implementation that does not handle misaligned traps as well as detecting misaligned accesses generated by userspace application using the prctrl(PR_SET_UNALIGN) feature. This series can be tested using the spike simulator[1] and a modified openSBI version[2] which allows to always delegate misaligned load/store to S-mode. A test[3] that exercise various instructions/registers can be executed to verify the unaligned access support. [1] https://github.com/riscv-software-src/riscv-isa-sim [2] https://github.com/rivosinc/opensbi/tree/dev/cleger/no_misaligned [3] https://github.com/clementleger/unaligned_test * b4-shazam-merge: riscv: add support for PR_SET_UNALIGN and PR_GET_UNALIGN riscv: report misaligned accesses emulation to hwprobe riscv: annotate check_unaligned_access_boot_cpu() with __init riscv: add support for sysctl unaligned_enabled control riscv: add floating point insn support to misaligned access emulation riscv: report perf event for misaligned fault riscv: add support for misaligned trap handling in S-mode riscv: remove unused functions in traps_misaligned.c Link: https://lore.kernel.org/r/20231004151405.521596-1-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-04Merge tag 'kbuild-v6.7' of ↵Linus Torvalds2-20/+0
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Implement the binary search in modpost for faster symbol lookup - Respect HOSTCC when linking host programs written in Rust - Change the binrpm-pkg target to generate kernel-devel RPM package - Fix endianness issues for tee and ishtp MODULE_DEVICE_TABLE - Unify vdso_install rules - Remove unused __memexit* annotations - Eliminate stale whitelisting for __devinit/__devexit from modpost - Enable dummy-tools to handle the -fpatchable-function-entry flag - Add 'userldlibs' syntax * tag 'kbuild-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits) kbuild: support 'userldlibs' syntax kbuild: dummy-tools: pretend we understand -fpatchable-function-entry kbuild: Correct missing architecture-specific hyphens modpost: squash ALL_{INIT,EXIT}_TEXT_SECTIONS to ALL_TEXT_SECTIONS modpost: merge sectioncheck table entries regarding init/exit sections modpost: use ALL_INIT_SECTIONS for the section check from DATA_SECTIONS modpost: disallow the combination of EXPORT_SYMBOL and __meminit* modpost: remove EXIT_SECTIONS macro modpost: remove MEM_INIT_SECTIONS macro modpost: remove more symbol patterns from the section check whitelist modpost: disallow *driver to reference .meminit* sections linux/init: remove __memexit* annotations modpost: remove ALL_EXIT_DATA_SECTIONS macro kbuild: simplify cmd_ld_multi_m kbuild: avoid too many execution of scripts/pahole-flags.sh kbuild: remove ARCH_POSTLINK from module builds kbuild: unify no-compiler-targets and no-sync-config-targets kbuild: unify vdso_install rules docs: kbuild: add INSTALL_DTBS_PATH UML: remove unused cmd_vdso_install ...
2023-11-03Merge tag 'tty-6.7-rc1' of ↵Linus Torvalds2-12/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty and serial updates from Greg KH: "Here is the big set of tty/serial driver changes for 6.7-rc1. Included in here are: - console/vgacon cleanups and removals from Arnd - tty core and n_tty cleanups from Jiri - lots of 8250 driver updates and cleanups - sc16is7xx serial driver updates - dt binding updates - first set of port lock wrapers from Thomas for the printk fixes coming in future releases - other small serial and tty core cleanups and updates All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (193 commits) serdev: Replace custom code with device_match_acpi_handle() serdev: Simplify devm_serdev_device_open() function serdev: Make use of device_set_node() tty: n_gsm: add copyright Siemens Mobility GmbH tty: n_gsm: fix race condition in status line change on dead connections serial: core: Fix runtime PM handling for pending tx vgacon: fix mips/sibyte build regression dt-bindings: serial: drop unsupported samsung bindings tty: serial: samsung: drop earlycon support for unsupported platforms tty: 8250: Add note for PX-835 tty: 8250: Fix IS-200 PCI ID comment tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks tty: 8250: Add support for Intashield IX cards tty: 8250: Add support for additional Brainboxes PX cards tty: 8250: Fix up PX-803/PX-857 tty: 8250: Fix port count of PX-257 tty: 8250: Add support for Intashield IS-100 tty: 8250: Add support for Brainboxes UP cards tty: 8250: Add support for additional Brainboxes UC cards tty: 8250: Remove UC-257 and UC-431 ...
2023-11-02Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-0/+2
Pull kvm updates from Paolo Bonzini: "ARM: - Generalized infrastructure for 'writable' ID registers, effectively allowing userspace to opt-out of certain vCPU features for its guest - Optimization for vSGI injection, opportunistically compressing MPIDR to vCPU mapping into a table - Improvements to KVM's PMU emulation, allowing userspace to select the number of PMCs available to a VM - Guest support for memory operation instructions (FEAT_MOPS) - Cleanups to handling feature flags in KVM_ARM_VCPU_INIT, squashing bugs and getting rid of useless code - Changes to the way the SMCCC filter is constructed, avoiding wasted memory allocations when not in use - Load the stage-2 MMU context at vcpu_load() for VHE systems, reducing the overhead of errata mitigations - Miscellaneous kernel and selftest fixes LoongArch: - New architecture for kvm. The hardware uses the same model as x86, s390 and RISC-V, where guest/host mode is orthogonal to supervisor/user mode. The virtualization extensions are very similar to MIPS, therefore the code also has some similarities but it's been cleaned up to avoid some of the historical bogosities that are found in arch/mips. The kernel emulates MMU, timer and CSR accesses, while interrupt controllers are only emulated in userspace, at least for now. RISC-V: - Support for the Smstateen and Zicond extensions - Support for virtualizing senvcfg - Support for virtualized SBI debug console (DBCN) S390: - Nested page table management can be monitored through tracepoints and statistics x86: - Fix incorrect handling of VMX posted interrupt descriptor in KVM_SET_LAPIC, which could result in a dropped timer IRQ - Avoid WARN on systems with Intel IPI virtualization - Add CONFIG_KVM_MAX_NR_VCPUS, to allow supporting up to 4096 vCPUs without forcing more common use cases to eat the extra memory overhead. - Add virtualization support for AMD SRSO mitigation (IBPB_BRTYPE and SBPB, aka Selective Branch Predictor Barrier). - Fix a bug where restoring a vCPU snapshot that was taken within 1 second of creating the original vCPU would cause KVM to try to synchronize the vCPU's TSC and thus clobber the correct TSC being set by userspace. - Compute guest wall clock using a single TSC read to avoid generating an inaccurate time, e.g. if the vCPU is preempted between multiple TSC reads. - "Virtualize" HWCR.TscFreqSel to make Linux guests happy, which complain about a "Firmware Bug" if the bit isn't set for select F/M/S combos. Likewise "virtualize" (ignore) MSR_AMD64_TW_CFG to appease Windows Server 2022. - Don't apply side effects to Hyper-V's synthetic timer on writes from userspace to fix an issue where the auto-enable behavior can trigger spurious interrupts, i.e. do auto-enabling only for guest writes. - Remove an unnecessary kick of all vCPUs when synchronizing the dirty log without PML enabled. - Advertise "support" for non-serializing FS/GS base MSR writes as appropriate. - Harden the fast page fault path to guard against encountering an invalid root when walking SPTEs. - Omit "struct kvm_vcpu_xen" entirely when CONFIG_KVM_XEN=n. - Use the fast path directly from the timer callback when delivering Xen timer events, instead of waiting for the next iteration of the run loop. This was not done so far because previously proposed code had races, but now care is taken to stop the hrtimer at critical points such as restarting the timer or saving the timer information for userspace. - Follow the lead of upstream Xen and ignore the VCPU_SSHOTTMR_future flag. - Optimize injection of PMU interrupts that are simultaneous with NMIs. - Usual handful of fixes for typos and other warts. x86 - MTRR/PAT fixes and optimizations: - Clean up code that deals with honoring guest MTRRs when the VM has non-coherent DMA and host MTRRs are ignored, i.e. EPT is enabled. - Zap EPT entries when non-coherent DMA assignment stops/start to prevent using stale entries with the wrong memtype. - Don't ignore guest PAT for CR0.CD=1 && KVM_X86_QUIRK_CD_NW_CLEARED=y This was done as a workaround for virtual machine BIOSes that did not bother to clear CR0.CD (because ancient KVM/QEMU did not bother to set it, in turn), and there's zero reason to extend the quirk to also ignore guest PAT. x86 - SEV fixes: - Report KVM_EXIT_SHUTDOWN instead of EINVAL if KVM intercepts SHUTDOWN while running an SEV-ES guest. - Clean up the recognition of emulation failures on SEV guests, when KVM would like to "skip" the instruction but it had already been partially emulated. This makes it possible to drop a hack that second guessed the (insufficient) information provided by the emulator, and just do the right thing. Documentation: - Various updates and fixes, mostly for x86 - MTRR and PAT fixes and optimizations" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (164 commits) KVM: selftests: Avoid using forced target for generating arm64 headers tools headers arm64: Fix references to top srcdir in Makefile KVM: arm64: Add tracepoint for MMIO accesses where ISV==0 KVM: arm64: selftest: Perform ISB before reading PAR_EL1 KVM: arm64: selftest: Add the missing .guest_prepare() KVM: arm64: Always invalidate TLB for stage-2 permission faults KVM: x86: Service NMI requests after PMI requests in VM-Enter path KVM: arm64: Handle AArch32 SPSR_{irq,abt,und,fiq} as RAZ/WI KVM: arm64: Do not let a L1 hypervisor access the *32_EL2 sysregs KVM: arm64: Refine _EL2 system register list that require trap reinjection arm64: Add missing _EL2 encodings arm64: Add missing _EL12 encodings KVM: selftests: aarch64: vPMU test for validating user accesses KVM: selftests: aarch64: vPMU register test for unimplemented counters KVM: selftests: aarch64: vPMU register test for implemented counters KVM: selftests: aarch64: Introduce vpmu_counter_access test tools: Import arm_pmuv3.h KVM: arm64: PMU: Allow userspace to limit PMCR_EL0.N for the guest KVM: arm64: Sanitize PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR} before first run KVM: arm64: Add {get,set}_user for PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR} ...
2023-11-02RISC-V: hwprobe: Fix vDSO SIGSEGVAndrew Jones1-1/+1
A hwprobe pair key is signed, but the hwprobe vDSO function was only checking that the upper bound was valid. In order to help avoid this type of problem in the future, and in anticipation of this check becoming more complicated with sparse keys, introduce and use a "key is valid" predicate function for the check. Fixes: aa5af0aa90ba ("RISC-V: Add hwprobe vDSO function and data") Signed-off-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Evan Green <evan@rivosinc.com> Link: https://lore.kernel.org/r/20231010165101.14942-2-ajones@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-02Merge patch series "riscv: SCS support"Palmer Dabbelt7-171/+112
Sami Tolvanen <samitolvanen@google.com> says: This series adds Shadow Call Stack (SCS) support for RISC-V. SCS uses compiler instrumentation to store return addresses in a separate shadow stack to protect them against accidental or malicious overwrites. More information about SCS can be found here: https://clang.llvm.org/docs/ShadowCallStack.html Patch 1 is from Deepak, and it simplifies VMAP_STACK overflow handling by adding support for accessing per-CPU variables directly in assembly. The patch is included in this series to make IRQ stack switching cleaner with SCS, and I've simply rebased it and fixed a couple of minor issues. Patch 2 uses this functionality to clean up the stack switching by moving duplicate code into a single function. On RISC-V, the compiler uses the gp register for storing the current shadow call stack pointer, which is incompatible with global pointer relaxation. Patch 3 moves global pointer loading into a macro that can be easily disabled with SCS. Patch 4 implements SCS register loading and switching, and allows the feature to be enabled, and patch 5 adds separate per-CPU IRQ shadow call stacks when CONFIG_IRQ_STACKS is enabled. Patch 6 fixes the backward-edge CFI test in lkdtm for RISC-V. Note that this series requires Clang 17. Earlier Clang versions support SCS on RISC-V, but use the x18 register instead of gp, which isn't ideal. gcc has SCS support for arm64, but I'm not aware of plans to support RISC-V. Once the Zicfiss extension is ratified, it's probably preferable to use hardware-backed shadow stacks instead of SCS on hardware that supports the extension, and we may want to consider implementing CONFIG_DYNAMIC_SCS to patch between the implementation at runtime (similarly to the arm64 implementation, which switches to SCS when hardware PAC support isn't available). * b4-shazam-merge: lkdtm: Fix CFI_BACKWARD on RISC-V riscv: Use separate IRQ shadow call stacks riscv: Implement Shadow Call Stack riscv: Move global pointer loading to a macro riscv: Deduplicate IRQ stack switching riscv: VMAP_STACK overflow detection thread-safe Link: https://lore.kernel.org/r/20230927224757.1154247-8-samitolvanen@google.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-01Merge tag 'sysctl-6.7-rc1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull sysctl updates from Luis Chamberlain: "To help make the move of sysctls out of kernel/sysctl.c not incur a size penalty sysctl has been changed to allow us to not require the sentinel, the final empty element on the sysctl array. Joel Granados has been doing all this work. On the v6.6 kernel we got the major infrastructure changes required to support this. For v6.7-rc1 we have all arch/ and drivers/ modified to remove the sentinel. Both arch and driver changes have been on linux-next for a bit less than a month. It is worth re-iterating the value: - this helps reduce the overall build time size of the kernel and run time memory consumed by the kernel by about ~64 bytes per array - the extra 64-byte penalty is no longer inncurred now when we move sysctls out from kernel/sysctl.c to their own files For v6.8-rc1 expect removal of all the sentinels and also then the unneeded check for procname == NULL. The last two patches are fixes recently merged by Krister Johansen which allow us again to use softlockup_panic early on boot. This used to work but the alias work broke it. This is useful for folks who want to detect softlockups super early rather than wait and spend money on cloud solutions with nothing but an eventual hung kernel. Although this hadn't gone through linux-next it's also a stable fix, so we might as well roll through the fixes now" * tag 'sysctl-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (23 commits) watchdog: move softlockup_panic back to early_param proc: sysctl: prevent aliased sysctls from getting passed to init intel drm: Remove now superfluous sentinel element from ctl_table array Drivers: hv: Remove now superfluous sentinel element from ctl_table array raid: Remove now superfluous sentinel element from ctl_table array fw loader: Remove the now superfluous sentinel element from ctl_table array sgi-xp: Remove the now superfluous sentinel element from ctl_table array vrf: Remove the now superfluous sentinel element from ctl_table array char-misc: Remove the now superfluous sentinel element from ctl_table array infiniband: Remove the now superfluous sentinel element from ctl_table array macintosh: Remove the now superfluous sentinel element from ctl_table array parport: Remove the now superfluous sentinel element from ctl_table array scsi: Remove now superfluous sentinel element from ctl_table array tty: Remove now superfluous sentinel element from ctl_table array xen: Remove now superfluous sentinel element from ctl_table array hpet: Remove now superfluous sentinel element from ctl_table array c-sky: Remove now superfluous sentinel element from ctl_talbe array powerpc: Remove now superfluous sentinel element from ctl_table arrays riscv: Remove now superfluous sentinel element from ctl_table array x86/vdso: Remove now superfluous sentinel element from ctl_table array ...
2023-11-01Merge tag 'docs-6.7' of git://git.lwn.net/linuxLinus Torvalds1-1/+1
Pull documentation updates from Jonathan Corbet: "The number of commits for documentation is not huge this time around, but there are some significant changes nonetheless: - Some more Spanish-language and Chinese translations - The much-discussed documentation of the confidential-computing threat model - Powerpc and RISCV documentation move under Documentation/arch - these complete this particular bit of documentation churn - A large traditional-Chinese documentation update - A new document on backporting and conflict resolution - Some kernel-doc and Sphinx fixes Plus the usual smattering of smaller updates and typo fixes" * tag 'docs-6.7' of git://git.lwn.net/linux: (40 commits) scripts/kernel-doc: Fix the regex for matching -Werror flag docs: backporting: address feedback Documentation: driver-api: pps: Update PPS generator documentation speakup: Document USB support doc: blk-ioprio: Bring the doc in line with the implementation docs: usb: fix reference to nonexistent file in UVC Gadget docs: doc-guide: mention 'make refcheckdocs' Documentation: fix typo in dynamic-debug howto scripts/kernel-doc: match -Werror flag strictly Documentation/sphinx: Remove the repeated word "the" in comments. docs: sparse: add SPDX-License-Identifier docs/zh_CN: Add subsystem-apis Chinese translation docs/zh_TW: update contents for zh_TW docs: submitting-patches: encourage direct notifications to commenters docs: add backporting and conflict resolution document docs: move riscv under arch docs: update link to powerpc/vmemmap_dedup.rst mm/memory-hotplug: fix typo in documentation docs: move powerpc under arch PCI: Update the devres documentation regarding to pcim_*() ...
2023-11-01riscv: add support for PR_SET_UNALIGN and PR_GET_UNALIGNClément Léger2-0/+24
Now that trap support is ready to handle misalignment errors in S-mode, allow the user to control the behavior of misaligned accesses using prctl(PR_SET_UNALIGN). Add an align_ctl flag in thread_struct which will be used to determine if we should SIGBUS the process or not on such fault. Signed-off-by: Clément Léger <cleger@rivosinc.com> Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20231004151405.521596-9-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-01riscv: report misaligned accesses emulation to hwprobeClément Léger3-1/+61
hwprobe provides a way to report if misaligned access are emulated. In order to correctly populate that feature, we can check if it actually traps when doing a misaligned access. This can be checked using an exception table entry which will actually be used when a misaligned access is done from kernel mode. Signed-off-by: Clément Léger <cleger@rivosinc.com> Link: https://lore.kernel.org/r/20231004151405.521596-8-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-01riscv: annotate check_unaligned_access_boot_cpu() with __initClément Léger1-1/+1
This function is solely called as an initcall, thus annotate it with __init. Signed-off-by: Clément Léger <cleger@rivosinc.com> Reviewed-by: Evan Green <evan@rivosinc.com> Link: https://lore.kernel.org/r/20231004151405.521596-7-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-01riscv: add support for sysctl unaligned_enabled controlClément Léger1-0/+9
This sysctl tuning option allows the user to disable misaligned access handling globally on the system. This will also be used by misaligned detection code to temporarily disable misaligned access handling. Signed-off-by: Clément Léger <cleger@rivosinc.com> Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20231004151405.521596-6-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-01riscv: add floating point insn support to misaligned access emulationClément Léger2-4/+269
This support is partially based of openSBI misaligned emulation floating point instruction support. It provides support for the existing floating point instructions (both for 32/64 bits as well as compressed ones). Since floating point registers are not part of the pt_regs struct, we need to modify them directly using some assembly. We also dirty the pt_regs status in case we modify them to be sure context switch will save FP state. With this support, Linux is on par with openSBI support. Signed-off-by: Clément Léger <cleger@rivosinc.com> Link: https://lore.kernel.org/r/20231004151405.521596-5-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-01riscv: report perf event for misaligned faultClément Léger1-0/+5
Add missing calls to account for misaligned fault event using perf_sw_event(). Signed-off-by: Clément Léger <cleger@rivosinc.com> Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20231004151405.521596-4-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-01riscv: add support for misaligned trap handling in S-modeClément Léger3-23/+107
Misalignment trap handling is only supported for M-mode and uses direct accesses to user memory. In S-mode, when handling usermode fault, this requires to use the get_user()/put_user() accessors. Implement load_u8(), store_u8() and get_insn() using these accessors for userspace and direct text access for kernel. Signed-off-by: Clément Léger <cleger@rivosinc.com> Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20231004151405.521596-3-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-04-07 20:00:31 +0000