summaryrefslogtreecommitdiff
path: root/arch/arc/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2017-02-06ARC: [plat-*] ARC_HAS_COH_CACHES no longer relevantVineet Gupta1-6/+0
A typical SMP system expects cache coherency. Initial NPS platform support was slated to be SMP w/o cache coherency. However it seems the platform now selects that option, so there is no point in keeping it around. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-02-06ARCv2: intc: Rework the build time irq count informationYuriy Kolerov1-11/+0
Currently Kconfig knob ARC_NUMBER_OF_INTERRUPTS is used as indicator of hard irq count. But it is flawed that it doesn't affect - NR_IRQS : for number of virtual interrupts - NR_CPU_IRQS : for number of hardware interrupts Moreover the actual hardware irq count might still not be same as ARC_NUMBER_OF_INTERRUPTS. So use the information availble in the Build Configuration Registers and get rid of the Kconfig option. We still need "some" build time info about irq count to set up sufficient number of vector table entries. This is done with a sufficiently large NR_CPU_IRQS which will eventually be used soley for that purpose (subsequent patches will remove its usage elsewhere) So to summarize what this patch does: * NR_CPU_IRQS defines a maximum number of hardware interrupts. * Remove ARC_NUMBER_OF_INTERRUPTS option and create interrupts table for all possible hardware interrupts. * Increase a maximum number of virtual IRQs to 512. ARCv2 can support 240 interrupts in the core interrupts controllers and 128 interrupts in IDU. Thus 512 virtual IRQs must be enough for most configurations of boards. This patch leads to NR_CPU_IRQS in 2 places, to reduce the overall churn. The next patch will remove the 2nd definition anyways. Signed-off-by: Yuriy Kolerov <yuriy.kolerov@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: reworked the changelog a bit]
2017-01-18ARC: module: Fix !CONFIG_ARC_DW2_UNWIND buildsVineet Gupta1-1/+1
commit d65283f7b695b5 added mod->arch.secstr under CONFIG_ARC_DW2_UNWIND, but used it unconditionally which broke builds when the option was disabled. Fix that by adjusting the #ifdef guard. And while at it add a missing guard (for unwinder) in module.c as well Reported-by: Waldemar Brodkorb <wbx@openadk.org> Cc: stable@vger.kernel.org #4.9 Fixes: d65283f7b695b5 ("ARC: module: elide loop to save reference to .eh_frame") Tested-by: Anton Kolesov <akolesov@synopsys.com> Reviewed-by: Alexey Brodkin <abrodkin@synopsys.com> [abrodkin: provided fixlet to Kconfig per failure in allnoconfig build] Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-12-18ARC: enable SG chainingVladimir Kondratiev1-0/+1
Signed-off-by: Vladimir Kondratiev <vladimir.kondratiev@intel.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-11-30clocksource: import ARC timer driverVineet Gupta1-5/+2
This adds support for - CONFIG_ARC_TIMERS : legacy 32-bit TIMER0 and TIMER1 which count UP from @CNT to @LIMIT, before optionally triggering an interrupt. These are programmed using ARC auxiliary register interface. These are present in all ARC cores (ARC700 and ARC HS38) TIMER0 serves as clockevent for all ARC linux builds. TIMER1 is used for clocksource in arc700 builds. - CONFIG_ARC_TIMERS_64BIT: 64-bit counters, RTC and GFRC found in ARC HS38 cores. These are independnet IP blocks with different programming model respectively. Link: http://lkml.kernel.org/r/20161111231132.GA4186@mai Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-11-30ARC: timer: gfrc, rtc: build under same option (64-bit timers)Vineet Gupta1-8/+2
The original distinction was done as they were developed at different times and primarily because they are specific to UP (RTC) and SMP (GFRC). But given that driver handles that at runtime, (i.e. not allowing RTC as clocksource in SMP), we can simplify things a bit. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-10-28ARC: mm: retire ARC_DBG_TLB_MISS_COUNT...Vineet Gupta1-8/+0
... given that we have perf counters abel to do the same thing non intrusively Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-10-16ARC: [build] Support gz, lzma compressed uImageDaniel Mentz1-0/+2
Add support for lzma compressed uImage. Support for gzip was already available but could not be enabled because we were missing CONFIG_HAVE_KERNEL_GZIP in arch/arc/Kconfig. Signed-off-by: Daniel Mentz <danielmentz@google.com> Cc: linux-snps-arc@lists.infradead.org Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-10-16ARCv2: intc: untangle SMP, MCIP and IDUVineet Gupta1-8/+9
The IDU intc is technically part of MCIP (Multi-core IP) hence historically was only available in a SMP hardware build (and thus only in a SMP kernel build). Now that hardware restriction has been lifted, so a UP kernel needs to support it. This requires breaking mcip.c into parts which are strictly SMP (inter-core interrupts) and IDU which in reality is just another intc and thus has no bearing on SMP. This change allows IDU in UP builds and with a suitable device tree, we can have the cascaded intc system ARCv2 core intc <---> ARCv2 IDU intc <---> periperals Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-09-30ARC: CONFIG_NODES_SHIFT fix default valuesNoam Camus1-2/+2
Seem like values assigned as absolute number and not and shift value, i.e. should be 0 for one node (2^0) and 1 for couple of nodes (2^1) Signed-off-by: Noam Camus <noamca@mellanox.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-09-30ARCv2: Implement atomic64 based on LLOCKD/SCONDD instructionsVineet Gupta1-1/+1
ARCv2 ISA provides 64-bit exclusive load/stores so use them to implement the 64-bit atomics and elide the spinlock based generic 64-bit atomics boot tested with atomic64 self-test (and GOD bless the person who wrote them, I realized my inline assmebly is sloppy as hell) Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-snps-arc@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-06-02Revert "ARCv2: spinlock/rwlock/atomics: Delayed retry of failed SCOND with ↵Vineet Gupta1-5/+0
exponential backoff" This reverts commit e78fdfef84be13a5c2b8276e12203cdf24778596. The issue was fixed in hardware in HS2.1C release and there are no known external users of affected RTL so revert the whole delayed retry series ! Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-31ARC: don't enable DISCONTIGMEM unconditionallyVineet Gupta1-2/+2
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-30ARC: [intc-compact] simplify code for 2 priority levelsVineet Gupta1-20/+2
ARC700 support for 2 interrupt priorities historically allowed even slow perpherals such as emac and uart to setup high priority interrupts which was wrong from the beginning as they could possibly delay the more critical timer interrupt. The hardware support for 2 level interrupts in ARCompact is less than ideal anyways (judging from the "hacks" in low level entry code and thus is not used in productions systems I know of. So reduce the scope of this to timer only, thereby reducing a bunch of complexity. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-20lib/GCD.c: use binary GCD algorithm instead of EuclideanZhaoxiu Zeng1-0/+1
The binary GCD algorithm is based on the following facts: 1. If a and b are all evens, then gcd(a,b) = 2 * gcd(a/2, b/2) 2. If a is even and b is odd, then gcd(a,b) = gcd(a/2, b) 3. If a and b are all odds, then gcd(a,b) = gcd((a-b)/2, b) = gcd((a+b)/2, b) Even on x86 machines with reasonable division hardware, the binary algorithm runs about 25% faster (80% the execution time) than the division-based Euclidian algorithm. On platforms like Alpha and ARMv6 where division is a function call to emulation code, it's even more significant. There are two variants of the code here, depending on whether a fast __ffs (find least significant set bit) instruction is available. This allows the unpredictable branches in the bit-at-a-time shifting loop to be eliminated. If fast __ffs is not available, the "even/odd" GCD variant is used. I use the following code to benchmark: #include <stdio.h> #include <stdlib.h> #include <stdint.h> #include <string.h> #include <time.h> #include <unistd.h> #define swap(a, b) \ do { \ a ^= b; \ b ^= a; \ a ^= b; \ } while (0) unsigned long gcd0(unsigned long a, unsigned long b) { unsigned long r; if (a < b) { swap(a, b); } if (b == 0) return a; while ((r = a % b) != 0) { a = b; b = r; } return b; } unsigned long gcd1(unsigned long a, unsigned long b) { unsigned long r = a | b; if (!a || !b) return r; b >>= __builtin_ctzl(b); for (;;) { a >>= __builtin_ctzl(a); if (a == b) return a << __builtin_ctzl(r); if (a < b) swap(a, b); a -= b; } } unsigned long gcd2(unsigned long a, unsigned long b) { unsigned long r = a | b; if (!a || !b) return r; r &= -r; while (!(b & r)) b >>= 1; for (;;) { while (!(a & r)) a >>= 1; if (a == b) return a; if (a < b) swap(a, b); a -= b; a >>= 1; if (a & r) a += b; a >>= 1; } } unsigned long gcd3(unsigned long a, unsigned long b) { unsigned long r = a | b; if (!a || !b) return r; b >>= __builtin_ctzl(b); if (b == 1) return r & -r; for (;;) { a >>= __builtin_ctzl(a); if (a == 1) return r & -r; if (a == b) return a << __builtin_ctzl(r); if (a < b) swap(a, b); a -= b; } } unsigned long gcd4(unsigned long a, unsigned long b) { unsigned long r = a | b; if (!a || !b) return r; r &= -r; while (!(b & r)) b >>= 1; if (b == r) return r; for (;;) { while (!(a & r)) a >>= 1; if (a == r) return r; if (a == b) return a; if (a < b) swap(a, b); a -= b; a >>= 1; if (a & r) a += b; a >>= 1; } } static unsigned long (*gcd_func[])(unsigned long a, unsigned long b) = { gcd0, gcd1, gcd2, gcd3, gcd4, }; #define TEST_ENTRIES (sizeof(gcd_func) / sizeof(gcd_func[0])) #if defined(__x86_64__) #define rdtscll(val) do { \ unsigned long __a,__d; \ __asm__ __volatile__("rdtsc" : "=a" (__a), "=d" (__d)); \ (val) = ((unsigned long long)__a) | (((unsigned long long)__d)<<32); \ } while(0) static unsigned long long benchmark_gcd_func(unsigned long (*gcd)(unsigned long, unsigned long), unsigned long a, unsigned long b, unsigned long *res) { unsigned long long start, end; unsigned long long ret; unsigned long gcd_res; rdtscll(start); gcd_res = gcd(a, b); rdtscll(end); if (end >= start) ret = end - start; else ret = ~0ULL - start + 1 + end; *res = gcd_res; return ret; } #else static inline struct timespec read_time(void) { struct timespec time; clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &time); return time; } static inline unsigned long long diff_time(struct timespec start, struct timespec end) { struct timespec temp; if ((end.tv_nsec - start.tv_nsec) < 0) { temp.tv_sec = end.tv_sec - start.tv_sec - 1; temp.tv_nsec = 1000000000ULL + end.tv_nsec - start.tv_nsec; } else { temp.tv_sec = end.tv_sec - start.tv_sec; temp.tv_nsec = end.tv_nsec - start.tv_nsec; } return temp.tv_sec * 1000000000ULL + temp.tv_nsec; } static unsigned long long benchmark_gcd_func(unsigned long (*gcd)(unsigned long, unsigned long), unsigned long a, unsigned long b, unsigned long *res) { struct timespec start, end; unsigned long gcd_res; start = read_time(); gcd_res = gcd(a, b); end = read_time(); *res = gcd_res; return diff_time(start, end); } #endif static inline unsigned long get_rand() { if (sizeof(long) == 8) return (unsigned long)rand() << 32 | rand(); else return rand(); } int main(int argc, char **argv) { unsigned int seed = time(0); int loops = 100; int repeats = 1000; unsigned long (*res)[TEST_ENTRIES]; unsigned long long elapsed[TEST_ENTRIES]; int i, j, k; for (;;) { int opt = getopt(argc, argv, "n:r:s:"); /* End condition always first */ if (opt == -1) break; switch (opt) { case 'n': loops = atoi(optarg); break; case 'r': repeats = atoi(optarg); break; case 's': seed = strtoul(optarg, NULL, 10); break; default: /* You won't actually get here. */ break; } } res = malloc(sizeof(unsigned long) * TEST_ENTRIES * loops); memset(elapsed, 0, sizeof(elapsed)); srand(seed); for (j = 0; j < loops; j++) { unsigned long a = get_rand(); /* Do we have args? */ unsigned long b = argc > optind ? strtoul(argv[optind], NULL, 10) : get_rand(); unsigned long long min_elapsed[TEST_ENTRIES]; for (k = 0; k < repeats; k++) { for (i = 0; i < TEST_ENTRIES; i++) { unsigned long long tmp = benchmark_gcd_func(gcd_func[i], a, b, &res[j][i]); if (k == 0 || min_elapsed[i] > tmp) min_elapsed[i] = tmp; } } for (i = 0; i < TEST_ENTRIES; i++) elapsed[i] += min_elapsed[i]; } for (i = 0; i < TEST_ENTRIES; i++) printf("gcd%d: elapsed %llu\n", i, elapsed[i]); k = 0; srand(seed); for (j = 0; j < loops; j++) { unsigned long a = get_rand(); unsigned long b = argc > optind ? strtoul(argv[optind], NULL, 10) : get_rand(); for (i = 1; i < TEST_ENTRIES; i++) { if (res[j][i] != res[j][0]) break; } if (i < TEST_ENTRIES) { if (k == 0) { k = 1; fprintf(stderr, "Error:\n"); } fprintf(stderr, "gcd(%lu, %lu): ", a, b); for (i = 0; i < TEST_ENTRIES; i++) fprintf(stderr, "%ld%s", res[j][i], i < TEST_ENTRIES - 1 ? ", " : "\n"); } } if (k == 0) fprintf(stderr, "PASS\n"); free(res); return 0; } Compiled with "-O2", on "VirtualBox 4.4.0-22-generic #38-Ubuntu x86_64" got: zhaoxiuzeng@zhaoxiuzeng-VirtualBox:~/develop$ ./gcd -r 500000 -n 10 gcd0: elapsed 10174 gcd1: elapsed 2120 gcd2: elapsed 2902 gcd3: elapsed 2039 gcd4: elapsed 2812 PASS zhaoxiuzeng@zhaoxiuzeng-VirtualBox:~/develop$ ./gcd -r 500000 -n 10 gcd0: elapsed 9309 gcd1: elapsed 2280 gcd2: elapsed 2822 gcd3: elapsed 2217 gcd4: elapsed 2710 PASS zhaoxiuzeng@zhaoxiuzeng-VirtualBox:~/develop$ ./gcd -r 500000 -n 10 gcd0: elapsed 9589 gcd1: elapsed 2098 gcd2: elapsed 2815 gcd3: elapsed 2030 gcd4: elapsed 2718 PASS zhaoxiuzeng@zhaoxiuzeng-VirtualBox:~/develop$ ./gcd -r 500000 -n 10 gcd0: elapsed 9914 gcd1: elapsed 2309 gcd2: elapsed 2779 gcd3: elapsed 2228 gcd4: elapsed 2709 PASS [akpm@linux-foundation.org: avoid #defining a CONFIG_ variable] Signed-off-by: Zhaoxiu Zeng <zhaoxiu.zeng@gmail.com> Signed-off-by: George Spelvin <linux@horizon.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-09ARC: Add eznps platform to Kconfig and MakefileNoam Camus1-0/+1
This commit should be left last since only now eznps platform is in state which one can actually use. Signed-off-by: Noam Camus <noamc@ezchip.com>
2016-05-09ARC: Make vmalloc size configurableNoam Camus1-0/+11
On ARC, lower 2G of address space is translated and used for - user vaddr space (region 0 to 5) - unused kernel-user gutter (region 6) - kernel vaddr space (region 7) where each region simply represents 256MB of address space. The kernel vaddr space of 256MB is used to implement vmalloc, modules So far this was enough, but not on EZChip system with 4K CPUs (given that per cpu mechanism uses vmalloc for allocating chunks) So allow VMALLOC_SIZE to be configurable by expanding down into the unused kernel-user gutter region which at default 256M was excessive anyways. Also use _BITUL() to fix a build error since PGDIR_SIZE cannot use "1UL" as called from assembly code in mm/tlbex.S Signed-off-by: Noam Camus <noamc@ezchip.com> [vgupta: rewrote changelog, debugged bootup crash due to int vs. hex] Acked-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-09ARC: [intc-*] Do a domain lookup in primary handler for hwirq -> linux virqVineet Gupta1-0/+1
The primary interrupt handler arch_do_IRQ() was passing hwirq as linux virq to core code. This was fragile and worked so far as we only had legacy/linear domains. This came out of a rant by Marc Zyngier. http://lists.infradead.org/pipermail/linux-snps-arc/2015-December/000298.html Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Noam Camus <noamc@ezchip.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-09ARC: clockevent: Prepare for DT based probeNoam Camus1-1/+2
- call clocksource_probe() - This in turns needs of_clk_init() to be called earlier Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Noam Camus <noamc@ezchip.com> [vgupta: broken off from a bigger patch] Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-05-05ARC: support HIGHMEM even without PAE40Vineet Gupta1-0/+13
Initial HIGHMEM support on ARC was introduced for PAE40 where the low memory (0x8000_0000 based) and high memory (0x1_0000_0000) were physically contiguous. So CONFIG_FLATMEM sufficed (despite a peipheral hole in the middle, which wasted a bit of struct page memory, but things worked). However w/o PAE, highmem was not possible and we could only reach ~1.75GB of DDR. Now there is a use case to access ~4GB of DDR w/o PAE40 The idea is to have low memory at canonical 0x8000_0000 and highmem at 0 so enire 4GB address space is available for physical addressing This needs additional platform/interconnect mapping to convert the non contiguous physical addresses into linear bus adresses. From Linux point of view, non contiguous divide means FLATMEM no longer works and DISCONTIGMEM is needed to track the pfns in the 2 regions. This scheme would also work for PAE40, only better in that we don't waste struct page memory for the peripheral hole. The DT description will be something like memory { ... reg = <0x80000000 0x200000000 /* 512MB: lowmem */ 0x00000000 0x10000000>; /* 256MB: highmem */ } Signed-off-by: Noam Camus <noamc@ezchip.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-04-27ARC: add support for reserved memory defined by device treeAlexey Brodkin1-0/+1
Enable reserved memory initialization from device tree. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-04-27ARC: support generic per-device coherent dma memAlexey Brodkin1-0/+1
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-04-07ARC: Don't source drivers/pci/pcie/Kconfig ourselvesAndreas Ziegler1-1/+0
Commit 5f8fc43217a0 ("PCI: Include pci/pcie/Kconfig directly from pci/Kconfig") in linux-next changed drivers/pci/Kconfig to include drivers/pci/pcie/Kconfig itself, so that architectures do not need to source both files themselves. ARC just recently gained PCI support through commit 6b3fb77998dd ("ARC: Add PCI support"), but this change was based on the old behaviour of the Kconfig files. This makes Kconfig now spit out the following warnings: drivers/pci/pcie/Kconfig:61:warning: choice value used outside its choice group drivers/pci/pcie/Kconfig:67:warning: choice value used outside its choice group drivers/pci/pcie/Kconfig:74:warning: choice value used outside its choice group This change updates the Kconfig file for ARC, dropping the now unnecessary 'source' statement, which makes the warning disappear. Signed-off-by: Andreas Ziegler <andreas.ziegler@fau.de> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-03-21Merge tag 'arc-4.6-rc1' of ↵Linus Torvalds1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC architecture updates from Vineet Gupta: - Big Endian io accessors fix [Lada] - Spellos fixes [Adam] - Fix for DW GMAC breakage [Alexey] - Making DMA API 64-bit ready - Shutting up -Wmaybe-uninitialized noise for ARC - Other minor fixes here and there, comments update * tag 'arc-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (21 commits) ARCv2: ioremap: Support dynamic peripheral address space ARC: dma: reintroduce platform specific dma<->phys ARC: dma: ioremap: use phys_addr_t consistenctly in code paths ARC: dma: pass_phys() not sg_virt() to cache ops ARC: dma: non-coherent pages need V-P mapping if in HIGHMEM ARC: dma: Use struct page based page allocator helpers ARC: build: Turn off -Wmaybe-uninitialized for ARC gcc 4.8 ARC: [plat-axs10x] add Ethernet PHY description in .dts arc: use of_platform_default_populate() to populate default bus ARC: thp: unbork !CONFIG_TRANSPARENT_HUGEPAGE build arc: [plat-nsimosci*] use ezchip network driver ARCv2: LLSC: software backoff is NOT needed starting HS2.1c ARC: mm: Use virt_to_pfn() for addr >> PAGE_SHIFT pattern ARC: [plat-nsim] document ranges ARC: build: Better way to detect ISA compatible toolchain ARCv2: Allow enabling PAE40 w/o HIGHMEM ARC: [BE] readl()/writel() to work in Big Endian CPU configuration ARC: [*defconfig] No need to specify CONFIG_CROSS_COMPILE ARC: [BE] Select correct CROSS_COMPILE prefix ARC: bitops: Remove non relevant comments ...
2016-03-19ARC: dma: reintroduce platform specific dma<->physVineet Gupta1-0/+3
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-03-16Merge tag 'pci-v4.6-changes' of ↵Linus Torvalds1-0/+26
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes for v4.6: Enumeration: - Disable IO/MEM decoding for devices with non-compliant BARs (Bjorn Helgaas) - Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs (Bjorn Helgaas Resource management: - Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXED (Bjorn Helgaas) - Don't assign or reassign immutable resources (Bjorn Helgaas) - Don't enable/disable ROM BAR if we're using a RAM shadow copy (Bjorn Helgaas) - Set ROM shadow location in arch code, not in PCI core (Bjorn Helgaas) - Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs (Bjorn Helgaas) - ia64: Use ioremap() instead of open-coded equivalent (Bjorn Helgaas) - ia64: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas) - MIPS: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas) - Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY (Bjorn Helgaas) - Don't leak memory if sysfs_create_bin_file() fails (Bjorn Helgaas) - rcar: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi) - designware: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi) Virtualization: - Wait for up to 1000ms after FLR reset (Alex Williamson) - Support SR-IOV on any function type (Kelly Zytaruk) - Add ACS quirk for all Cavium devices (Manish Jaggi) AER: - Rename pci_ops_aer to aer_inj_pci_ops (Bjorn Helgaas) - Restore pci_ops pointer while calling original pci_ops (David Daney) - Fix aer_inject error codes (Jean Delvare) - Use dev_warn() in aer_inject (Jean Delvare) - Log actual error causes in aer_inject (Jean Delvare) - Log aer_inject error injections (Jean Delvare) VPD: - Prevent VPD access for buggy devices (Babu Moger) - Move pci_read_vpd() and pci_write_vpd() close to other VPD code (Bjorn Helgaas) - Move pci_vpd_release() from header file to pci/access.c (Bjorn Helgaas) - Remove struct pci_vpd_ops.release function pointer (Bjorn Helgaas) - Rename VPD symbols to remove unnecessary "pci22" (Bjorn Helgaas) - Fold struct pci_vpd_pci22 into struct pci_vpd (Bjorn Helgaas) - Sleep rather than busy-wait for VPD access completion (Bjorn Helgaas) - Update VPD definitions (Hannes Reinecke) - Allow access to VPD attributes with size 0 (Hannes Reinecke) - Determine actual VPD size on first access (Hannes Reinecke) Generic host bridge driver: - Move structure definitions to separate header file (David Daney) - Add pci_host_common_probe(), based on gen_pci_probe() (David Daney) - Expose pci_host_common_probe() for use by other drivers (David Daney) Altera host bridge driver: - Fix altera_pcie_link_is_up() (Ley Foon Tan) Cavium ThunderX host bridge driver: - Add PCIe host driver for ThunderX processors (David Daney) - Add driver for ThunderX-pass{1,2} on-chip devices (David Daney) Freescale i.MX6 host bridge driver: - Add DT bindings to configure PHY Tx driver settings (Justin Waters) - Move imx6_pcie_reset_phy() near other PHY handling functions (Lucas Stach) - Move PHY reset into imx6_pcie_establish_link() (Lucas Stach) - Remove broken Gen2 workaround (Lucas Stach) - Move link up check into imx6_pcie_wait_for_link() (Lucas Stach) Freescale Layerscape host bridge driver: - Add "fsl,ls2085a-pcie" compatible ID (Yang Shi) Intel VMD host bridge driver: - Attach VMD resources to parent domain's resource tree (Jon Derrick) - Set bus resource start to 0 (Keith Busch) Microsoft Hyper-V host bridge driver: - Add fwnode_handle to x86 pci_sysdata (Jake Oshins) - Look up IRQ domain by fwnode_handle (Jake Oshins) - Add paravirtual PCI front-end for Microsoft Hyper-V VMs (Jake Oshins) NVIDIA Tegra host bridge driver: - Add pci_ops.{add,remove}_bus() callbacks (Thierry Reding) - Implement ->{add,remove}_bus() callbacks (Thierry Reding) - Remove unused struct tegra_pcie.num_ports field (Thierry Reding) - Track bus -> CPU mapping (Thierry Reding) - Remove misleading PHYS_OFFSET (Thierry Reding) Renesas R-Car host bridge driver: - Depend on ARCH_RENESAS, not ARCH_SHMOBILE (Simon Horman) Synopsys DesignWare host bridge driver: - ARC: Add PCI support (Joao Pinto) - Add generic dw_pcie_wait_for_link() (Joao Pinto) - Add default link up check if sub-driver doesn't override (Joao Pinto) - Add driver for prototyping kits based on ARC SDP (Joao Pinto) TI Keystone host bridge driver: - Defer probing if devm_phy_get() returns -EPROBE_DEFER (Shawn Lin) Xilinx AXI host bridge driver: - Use of_pci_get_host_bridge_resources() to parse DT (Bharat Kumar Gogada) - Remove dependency on ARM-specific struct hw_pci (Bharat Kumar Gogada) - Don't call pci_fixup_irqs() on Microblaze (Bharat Kumar Gogada) - Update Zynq binding with Microblaze node (Bharat Kumar Gogada) - microblaze: Support generic Xilinx AXI PCIe Host Bridge IP driver (Bharat Kumar Gogada) Xilinx NWL host bridge driver: - Add support for Xilinx NWL PCIe Host Controller (Bharat Kumar Gogada) Miscellaneous: - Check device_attach() return value always (Bjorn Helgaas) - Move pci_set_flags() from asm-generic/pci-bridge.h to linux/pci.h (Bjorn Helgaas) - Remove includes of empty asm-generic/pci-bridge.h (Bjorn Helgaas) - ARM64: Remove generated include of asm-generic/pci-bridge.h (Bjorn Helgaas) - Remove empty asm-generic/pci-bridge.h (Bjorn Helgaas) - Remove includes of asm/pci-bridge.h (Bjorn Helgaas) - Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h (Bjorn Helgaas) - unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition (Bjorn Helgaas) - Cleanup pci/pcie/Kconfig whitespace (Andreas Ziegler) - Include pci/hotplug Kconfig directly from pci/Kconfig (Bjorn Helgaas) - Include pci/pcie/Kconfig directly from pci/Kconfig (Bogicevic Sasa) - frv: Remove stray pci_{alloc,free}_consistent() declaration (Christoph Hellwig) - Move pci_dma_* helpers to common code (Christoph Hellwig) - Add PCI_CLASS_SERIAL_USB_DEVICE definition (Heikki Krogerus) - Add QEMU top-level IDs for (sub)vendor & device (Robin H. Johnson) - Fix broken URL for Dell biosdevname (Naga Venkata Sai Indubhaskar Jupudi)" * tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits) PCI: Add PCI_CLASS_SERIAL_USB_DEVICE definition PCI: designware: Add driver for prototyping kits based on ARC SDP PCI: designware: Add default link up check if sub-driver doesn't override PCI: designware: Add generic dw_pcie_wait_for_link() PCI: Cleanup pci/pcie/Kconfig whitespace PCI: Simplify pci_create_attr() control flow PCI: Don't leak memory if sysfs_create_bin_file() fails PCI: Simplify sysfs ROM cleanup PCI: Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY MIPS: Loongson 3: Keep CPU physical (not virtual) addresses in shadow ROM resource MIPS: Loongson 3: Use temporary struct resource * to avoid repetition ia64/PCI: Keep CPU physical (not virtual) addresses in shadow ROM resource ia64/PCI: Use ioremap() instead of open-coded equivalent ia64/PCI: Use temporary struct resource * to avoid repetition PCI: Clean up pci_map_rom() whitespace PCI: Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs PCI: thunder: Add driver for ThunderX-pass{1,2} on-chip devices PCI: thunder: Add PCIe host driver for ThunderX processors PCI: generic: Expose pci_host_common_probe() for use by other drivers PCI: generic: Add pci_host_common_probe(), based on gen_pci_probe() ...
2016-03-15ARCv2: LLSC: software backoff is NOT needed starting HS2.1cVineet Gupta1-1/+1
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-03-12ARCv2: Allow enabling PAE40 w/o HIGHMEMVineet Gupta1-1/+0
This allows for regression testing in PAE specific code as we lack a 32+ bit physical memory platform other than nSIM. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-03-10ARC: Add PCI supportJoao Pinto1-0/+26
Add PCI support to ARC and update drivers/pci Makefile enabling the ARC arch to use the generic PCI setup functions. [bhelgaas: fold in Joao's pci-dma-compat.h & pci-bridge.h build fix (I should have caught this myself, sorry] Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Vineet Gupta <vgupta@synopsys.com>
2016-02-24ARC: SMP: No need for CONFIG_ARC_IPI_DBGVineet Gupta1-8/+0
This was more relevant during SMP bringup. The warning for bogus msg better be visible always. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-02-23arc: get rid of DEVTMPFS dependency on INITRAMFS_SOURCEAlexey Brodkin1-2/+0
Even though DEVTMPFS is required when our pre-built initramfs is used it is not the case in general. It is perfectly possible to use initramfs with device nodes already populated or there could be other usages, see discussion below for more detials: http://thread.gmane.org/gmane.comp.embedded.openwrt.devel/37819/focus=37821 This change removes mentioned dependency from arch/arc/Kconfig updating instead those defconfigs that are usually used with this kind of pre-build initramfs. And while at it all touched defconfigs were regenerated via savedefconfig and some options were removed: * USB is selected by other options implicitly * VGA_CONSOLE is disableb for ARC since 031e29b5877f31676739dc2f847d04c2c0732034 * EXT3_FS automatically selects EXT4_FS * MTDxxx and JFFS2_FS make no sense for AXS because AXS NAND controller is not upstreamed * NET_OSCI_LAN is not in upstream as well * ARCPGU_xxx options make no sense because ARC PGU is not yet in upstream and when it gets there all config options would be taken from devicetree Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-02-18ARC: Assume multiplier is always presentVineet Gupta1-8/+0
It is unlikely that designs running Linux will not have multiplier. Further the current support is not complete as tool don't generate a multilib w/o multiplier. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-02-13Merge tag 'arc-4.5-fixes' of ↵Linus Torvalds1-1/+20
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: "I've been sitting on some of these fixes for a while. - Corner case of returning to delay slot from interrupt - Changing default interrupt prioiry level - Kconfig'ize support for super pages - Other minor fixes" * tag 'arc-4.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: mm: Introduce explicit super page size support ARCv2: intc: Allow interruption by lowest priority interrupt ARCv2: Check for LL-SC livelock only if LLSC is enabled ARC: shrink cpuinfo by not saving full timer BCR ARCv2: clocksource: Rename GRTC -> GFRC ... ARCv2: STAR 9000950267: Handle return from intr to Delay Slot #2
2016-02-12ARC: mm: Introduce explicit super page size supportVineet Gupta1-0/+19
MMUv4 supports 2 concurrent page sizes: Normal and Super [4K to 16M] So far Linux supported a single super page size for a given Normal page, depending on the software page walking address split. e.g. we had 11:8:13 address split for 8K page, which meant super page was 2 ^(8+13) = 2M (given that THP size has to be PMD_SHIFT) Now we turn this around, by allowing multiple Super Pages in Kconfig (currently 2M and 16M only) and forcing page walker address split to PGDIR_SHIFT and PAGE_SHIFT For configs without Super page, things are same as before and PGDIR_SHIFT can be hacked to get non default address split The motivation for this change is a customer who needs 16M super page and a 8K Normal page combo. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-01-29ARCv2: clocksource: Rename GRTC -> GFRC ...Vineet Gupta1-1/+1
... it is now called Global Free Running Counter Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-01-16Kconfig: remove HAVE_LATENCYTOP_SUPPORTWill Deacon1-3/+0
As illustrated by commit a3afe70b83fd ("[S390] latencytop s390 support."), HAVE_LATENCYTOP_SUPPORT is defined by an architecture to advertise an implementation of save_stack_trace_tsk. However, as of 9212ddb5eada ("stacktrace: provide save_stack_trace_tsk() weak alias") a dummy implementation is provided if STACKTRACE=y. Given that LATENCYTOP already depends on STACKTRACE_SUPPORT and selects STACKTRACE, we can remove HAVE_LATENCYTOP_SUPPORT altogether. Signed-off-by: Will Deacon <will.deacon@arm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: James Hogan <james.hogan@imgtec.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Helge Deller <deller@gmx.de> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-12-17ARC: [plat-sim] unbork non default CONFIG_LINUX_LINK_BASEVineet Gupta1-0/+1
HIGHMEM support bumped the default memory size for nsim platform to 1G. Thus total memory ended at the very edge of start of peripherals address space. With linux link base shifted, memory started bleeding into peripheral space which caused early boot bad_page spew ! Fixes: 29e332261d2 ("ARC: mm: HIGHMEM: populate high memory from DT") Reported-by: Anton Kolesov <akolesov@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-10-29ARC: mm: PAE40 supportVineet Gupta1-0/+15
This is the first working implementation of 40-bit physical address extension on ARCv2. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-10-28ARC: mm: HIGHMEM: kmap API implementationVineet Gupta1-0/+7
Implement kmap* API for ARC. This enables - permanent kernel maps (pkmaps): :kmap() API - fixmap : kmap_atomic() We use a very simple/uniform approach for both (unlike some of the other arches). So fixmap doesn't use the customary compile time address stuff. The important semantic is sleep'ability (pkmap) vs. not (fixmap) which the API guarantees. Note that this patch only enables highmem for subsequent PAE40 support as there is no real highmem for ARC in pure 32-bit paradigm as explained below. ARC has 2:2 address split of the 32-bit address space with lower half being translated (virtual) while upper half unstranslated (0x8000_0000 to 0xFFFF_FFFF). kernel itself is linked at base of unstranslated space (i.e. 0x8000_0000 onwards), which is mapped to say DDR 0x0 by external Bus Glue logic (outside the core). So kernel can potentially access 1.75G worth of memory directly w/o need for highmem. (the top 256M is taken by uncached peripheral space from 0xF000_0000 to 0xFFFF_FFFF) In PAE40, hardware can address memory beyond 4G (0x1_0000_0000) while the logical/virtual addresses remain 32-bits. Thus highmem is required for kernel proper to be able to access these pages for it's own purposes (user space is agnostic to this anyways). Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-10-28ARC: boot: Support Halt-on-reset and Run-on-reset SMP booting modesVineet Gupta1-0/+10
For Run-on-reset, non masters need to spin wait. For Halt-on-reset they can jump to entry point directly. Also while at it, made reset vector handler as "the" entry point for kernel including host debugger based boot (which uses the ELF header entry point) Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-10-17ARC: mm: MMU v1..v3 only selectable for ARCompact ISA based coresVineet Gupta1-0/+4
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-10-17ARCv2: mm: THP supportVineet Gupta1-0/+4
MMUv4 in HS38x cores supports Super Pages which are basis for Linux THP support. Normal and Super pages can co-exist (ofcourse not overlap) in TLB with a new bit "SZ" in TLB page desciptor to distinguish between them. Super Page size is configurable in hardware (4K to 16M), but fixed once RTL builds. The exact THP size a Linx configuration will support is a function of: - MMU page size (typical 8K, RTL fixed) - software page walker address split between PGD:PTE:PFN (typical 11:8:13, but can be changed with 1 line) So for above default, THP size supported is 8K * 256 = 2M Default Page Walker is 2 levels, PGD:PTE:PFN, which in THP regime reduces to 1 level (as PTE is folded into PGD and canonically referred to as PMD). Thus thp PMD accessors are implemented in terms of PTE (just like sparc) Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-08-20ARC: Enable HAVE_FUTEX_CMPXCHGVineet Gupta1-0/+1
ARC doesn't need the runtime detection of futex cmpxchg op Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-08-11ARC: Enable optimistic spinning for LLSC configVineet Gupta1-0/+1
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-08-04ARCv2: spinlock/rwlock/atomics: Delayed retry of failed SCOND with ↵Vineet Gupta1-0/+5
exponential backoff This is to workaround the llock/scond livelock HS38x4 could get into a LLOCK/SCOND livelock in case of multiple overlapping coherency transactions in the SCU. The exclusive line state keeps rotating among contenting cores leading to a never ending cycle. So break the cycle by deferring the retry of failed exclusive access (SCOND). The actual delay needed is function of number of contending cores as well as the unrelated coherency traffic from other cores. To keep the code simple, start off with small delay of 1 which would suffice most cases and in case of contention double the delay. Eventually the delay is sufficient such that the coherency pipeline is drained, thus a subsequent exclusive access would succeed. Link: http://lkml.kernel.org/r/1438612568-28265-1-git-send-email-vgupta@synopsys.com Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-07-23ARCv2: allow selection of page size for MMUv4Alexey Brodkin1-2/+2
MMUv4 also supports the configurable page size as MMUv3. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-07-20ARCv2: add knob for DIV_REV in KconfigAlexey Brodkin1-0/+4
Being highly configurable core ARC HS among other features might be configured with or without DIV_REM_OPTION (hardware divider). That option when enabled adds following instructions: div, divu, rem, remu. By default ARC HS38 has this option enabled. So we add here possibility to disable usage of hardware divider by compiler. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-07-06ARC: Kconfig: better way to disable ARC_HAS_LLSC for ARC_CPU_750DVineet Gupta1-1/+2
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-25ARCv2: All bits in place, allow ARCv2 buildsVineet Gupta1-5/+4
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-22ARCv2: SMP: clocksource: Enable Global Real Time counterVineet Gupta1-0/+5
Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>