Merge tag 'qcom-dts-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

More Qualcomm ARM32 DTS updates for 6.3

This adds backlight, notification LED, vibrator, volume keys and hall
sensor to the OnePlus One, and provides a range of Devicetree validation
fixes across various platforms.

* tag 'qcom-dts-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (22 commits)
  ARM: dts: qcom: align OPP table names with DT schema
  ARM: dts: qcom: msm8974-oneplus-bacon: Add notification LED
  ARM: dts: qcom: msm8974-oneplus-bacon: Add backlight
  ARM: dts: qcom: msm8974-oneplus-bacon: Add volume keys and hall sensor
  ARM: dts: qcom: msm8974-oneplus-bacon: Add vibrator
  ARM: dts: qcom: pm8941: Add vibrator node
  ARM: dts: qcom: sdx55: correct TLMM gpio-ranges
  dt-bindings: arm: qcom: add the sa8775p-ride board
  ARM: dts: qcom: apq8064: add second DSI host and PHY
  ARM: dts: qcom: apq8060-dragonboard: align MPP pin node names with DT schema
  dt-bindings: arm: qcom: Add Xiaomi Mi Pad 5 Pro (xiaomi-elish)
  ARM: dts: qcom-sdx65: align RPMh regulator nodes with bindings
  ARM: dts: qcom-sdx55: align RPMh regulator nodes with bindings
  ARM: dts: qcom: use "okay" for status
  ARM: dts: qcom: sdx65: Add Qcom SMMU-500 as the fallback for IOMMU node
  ARM: dts: qcom: sdx55: Add Qcom SMMU-500 as the fallback for IOMMU node
  ARM: dts: qcom: apq8064: use hdmi_phy for the MMCC's hdmipll clock
  ARM: dts: qcom: apq8064: add #clock-cells to the HDMI PHY node
  ARM: dts: qcom: ipq8064: move reg-less nodes outside soc node
  dt-bindings: qcom: Document msm8916-thwc-uf896 and ufi001c
  ...

Link: https://lore.kernel.org/r/20230210185846.2032601-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

13 files changed, 216 insertions, 41 deletions

diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
index 7a4c59e04af6..8e4b61e4d4b1 100644
--- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
@@ -435,15 +435,13 @@
 
 &pm8058_mpps {
 	dragon_cm3605_mpps: cm3605-mpps-state {
-		mpp5 {
-			pins = "mpp5";
-			function = "analog";
-			input-enable;
-			bias-high-impedance;
-			/* Let's use channel 5 */
-			qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>;
-			power-source = <PM8058_GPIO_S3>;
-		};
+		pins = "mpp5";
+		function = "analog";
+		input-enable;
+		bias-high-impedance;
+		/* Let's use channel 5 */
+		qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>;
+		power-source = <PM8058_GPIO_S3>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 95705703fe8f..92aa2b081901 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -865,9 +865,9 @@
 				 <&gcc PLL8_VOTE>,
 				 <&dsi0_phy 1>,
 				 <&dsi0_phy 0>,
-				 <0>,
-				 <0>,
-				 <0>;
+				 <&dsi1_phy 1>,
+				 <&dsi1_phy 0>,
+				 <&hdmi_phy>;
 			clock-names = "pxo",
 				      "pll3",
 				      "pll8_vote",
@@ -1342,6 +1342,80 @@
 			status = "disabled";
 		};
 
+		dsi1: dsi@5800000 {
+			compatible = "qcom,mdss-dsi-ctrl";
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x05800000 0x200>;
+			reg-names = "dsi_ctrl";
+
+			clocks = <&mmcc DSI2_M_AHB_CLK>,
+				 <&mmcc DSI2_S_AHB_CLK>,
+				 <&mmcc AMP_AHB_CLK>,
+				 <&mmcc DSI2_CLK>,
+				 <&mmcc DSI2_BYTE_CLK>,
+				 <&mmcc DSI2_PIXEL_CLK>,
+				 <&mmcc DSI2_ESC_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "core_mmss",
+				      "src",
+				      "byte",
+				      "pixel",
+				      "core";
+
+			assigned-clocks = <&mmcc DSI2_BYTE_SRC>,
+					  <&mmcc DSI2_ESC_SRC>,
+					  <&mmcc DSI2_SRC>,
+					  <&mmcc DSI2_PIXEL_SRC>;
+			assigned-clock-parents = <&dsi1_phy 0>,
+						 <&dsi1_phy 0>,
+						 <&dsi1_phy 1>,
+						 <&dsi1_phy 1>;
+
+			syscon-sfpb = <&mmss_sfpb>;
+			phys = <&dsi1_phy>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dsi1_in: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					dsi1_out: endpoint {
+					};
+				};
+			};
+		};
+
+
+		dsi1_phy: dsi-phy@5800200 {
+			compatible = "qcom,dsi-phy-28nm-8960";
+			reg = <0x05800200 0x100>,
+			      <0x05800300 0x200>,
+			      <0x05800500 0x5c>;
+			reg-names = "dsi_pll",
+				    "dsi_phy",
+				    "dsi_phy_regulator";
+			clock-names = "iface",
+				      "ref";
+			clocks = <&mmcc DSI2_M_AHB_CLK>,
+				 <&pxo_board>;
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
 
 		mdp_port0: iommu@7500000 {
 			compatible = "qcom,apq8064-iommu";
@@ -1489,6 +1563,7 @@
 			clocks = <&mmcc HDMI_S_AHB_CLK>;
 			clock-names = "slave_iface";
 			#phy-cells = <0>;
+			#clock-cells = <0>;
 
 			status = "disabled";
 		};
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index a73c3a17b6a4..02e9ea78405d 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -106,7 +106,7 @@
 		};
 	};
 
-	cpu0_opp_table: opp_table0 {
+	cpu0_opp_table: opp-table {
 		compatible = "operating-points-v2";
 		opp-shared;
 
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index ae018a7dc6fd..52d77e105957 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -326,26 +326,26 @@
 		};
 	};
 
+	stmmac_axi_setup: stmmac-axi-config {
+		snps,wr_osr_lmt = <7>;
+		snps,rd_osr_lmt = <7>;
+		snps,blen = <16 0 0 0 0 0 0>;
+	};
+
+	vsdcc_fixed: vsdcc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "SDCC Power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
 		compatible = "simple-bus";
 
-		stmmac_axi_setup: stmmac-axi-config {
-			snps,wr_osr_lmt = <7>;
-			snps,rd_osr_lmt = <7>;
-			snps,blen = <16 0 0 0 0 0 0>;
-		};
-
-		vsdcc_fixed: vsdcc-regulator {
-			compatible = "regulator-fixed";
-			regulator-name = "SDCC Power";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
 		rpm: rpm@108000 {
 			compatible = "qcom,rpm-ipq8064";
 			reg = <0x00108000 0x1000>;
diff --git a/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts b/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts
index 6a082ad4418a..288cacd5d1fa 100644
--- a/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts
+++ b/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts
@@ -20,5 +20,5 @@
 };
 
 &blsp1_uart3 {
-	status = "ok";
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
index b5606623f968..8d2a054d8fee 100644
--- a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
+++ b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
@@ -19,6 +19,38 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>, <&gpio_hall_sensor_default>;
+		pinctrl-names = "default";
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 68 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+			debounce-interval = <150>;
+		};
+	};
 };
 
 &blsp1_i2c1 {
@@ -67,6 +99,49 @@
 			syna,clip-y-high = <1920>;
 		};
 	};
+
+	led-controller@36 {
+		compatible = "ti,lm3630a";
+		reg = <0x36>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			led-sources = <0 1>;
+			label = "lcd-backlight";
+			default-brightness = <80>;
+		};
+	};
+
+	led-controller@68 {
+		compatible = "si-en,sn3193";
+		reg = <0x68>;
+
+		shutdown-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			label = "red:status";
+			led-max-microamp = <17500>;
+		};
+
+		led@2 {
+			reg = <2>;
+			label = "green:status";
+			led-max-microamp = <17500>;
+		};
+
+		led@3 {
+			reg = <3>;
+			label = "blue:status";
+			led-max-microamp = <17500>;
+		};
+	};
 };
 
 &blsp1_i2c6 {
@@ -95,6 +170,20 @@
 	status = "okay";
 };
 
+&pm8941_gpios {
+	gpio_keys_default: gpio-keys-active-state {
+		pins = "gpio2", "gpio5";
+		function = "normal";
+		input-enable;
+		bias-disable;
+		power-source = <PM8941_GPIO_S3>;
+	};
+};
+
+&pm8941_vib {
+	status = "okay";
+};
+
 &pronto {
 	vddmx-supply = <&pm8841_s1>;
 	vddcx-supply = <&pm8841_s2>;
@@ -345,6 +434,13 @@
 };
 
 &tlmm {
+	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
+		pins = "gpio68";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
 	sdc1_on: sdc1-on-state {
 		clk-pins {
 			pins = "sdc1_clk";
diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index cd957a1e7cdf..a821f0368a28 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -161,6 +161,12 @@
 			status = "disabled";
 		};
 
+		pm8941_vib: vibrator@c000 {
+			compatible = "qcom,pm8916-vib";
+			reg = <0xc000>;
+			status = "disabled";
+		};
+
 		pm8941_wled: wled@d800 {
 			compatible = "qcom,pm8941-wled";
 			reg = <0xd800>;
diff --git a/arch/arm/boot/dts/qcom-sdx55-mtp.dts b/arch/arm/boot/dts/qcom-sdx55-mtp.dts
index 6f8909731faf..7e97ad5803d8 100644
--- a/arch/arm/boot/dts/qcom-sdx55-mtp.dts
+++ b/arch/arm/boot/dts/qcom-sdx55-mtp.dts
@@ -75,7 +75,7 @@
 };
 
 &apps_rsc {
-	pmx55-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pmx55-rpmh-regulators";
 		qcom,pmic-id = "e";
 
diff --git a/arch/arm/boot/dts/qcom-sdx55-t55.dts b/arch/arm/boot/dts/qcom-sdx55-t55.dts
index 61ac5f54cd57..d5343bb0daee 100644
--- a/arch/arm/boot/dts/qcom-sdx55-t55.dts
+++ b/arch/arm/boot/dts/qcom-sdx55-t55.dts
@@ -98,7 +98,7 @@
 };
 
 &apps_rsc {
-	pmx55-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pmx55-rpmh-regulators";
 		qcom,pmic-id = "e";
 
@@ -233,7 +233,7 @@
 };
 
 &blsp1_uart3 {
-	status = "ok";
+	status = "okay";
 };
 
 &ipa {
@@ -243,11 +243,11 @@
 };
 
 &qpic_bam {
-	status = "ok";
+	status = "okay";
 };
 
 &qpic_nand {
-	status = "ok";
+	status = "okay";
 
 	nand@0 {
 		reg = <0>;
diff --git a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
index c9c1f7da1261..ad74ecc2a196 100644
--- a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
+++ b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
@@ -98,7 +98,7 @@
 };
 
 &apps_rsc {
-	pmx55-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pmx55-rpmh-regulators";
 		qcom,pmic-id = "e";
 
@@ -233,7 +233,7 @@
 };
 
 &blsp1_uart3 {
-	status = "ok";
+	status = "okay";
 };
 
 &ipa {
@@ -258,11 +258,11 @@
 };
 
 &qpic_bam {
-	status = "ok";
+	status = "okay";
 };
 
 &qpic_nand {
-	status = "ok";
+	status = "okay";
 
 	nand@0 {
 		reg = <0>;
diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
index a9433d1e4f54..df7303c5c843 100644
--- a/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -560,7 +560,7 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			gpio-ranges = <&tlmm 0 0 109>;
+			gpio-ranges = <&tlmm 0 0 108>;
 		};
 
 		sram@1468f000 {
@@ -579,7 +579,7 @@
 		};
 
 		apps_smmu: iommu@15000000 {
-			compatible = "qcom,sdx55-smmu-500", "arm,mmu-500";
+			compatible = "qcom,sdx55-smmu-500", "qcom,smmu-500", "arm,mmu-500";
 			reg = <0x15000000 0x20000>;
 			#iommu-cells = <2>;
 			#global-interrupts = <1>;
diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
index 85ea02d8362d..ed98c83c141f 100644
--- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts
+++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
@@ -65,7 +65,7 @@
 };
 
 &apps_rsc {
-	pmx65-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pmx65-rpmh-regulators";
 		qcom,pmic-id = "b";
 
diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
index 619cafb6d9b3..192f9f94bc8b 100644
--- a/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -456,7 +456,7 @@
 		};
 
 		apps_smmu: iommu@15000000 {
-			compatible = "qcom,sdx65-smmu-500", "arm,mmu-500";
+			compatible = "qcom,sdx65-smmu-500", "qcom,smmu-500", "arm,mmu-500";
 			reg = <0x15000000 0x40000>;
 			#iommu-cells = <2>;
 			#global-interrupts = <1>;