Merge tag 'samsung-dt-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt

Samsung DTS ARM changes for v6.3, part two

Several cleanups pointed out by `make dtbs_check`:
1. Align LED status node name with bindings.
2. Drop redundant properties.
3. Move i2c-gpio node out of soc to top-level, as soc node is expected
   to have only MMIO nodes.
4. Correct SPI NOR flash compatible in SMDK5250 and SMDKv310.
5. Align GPIO property names in WM1811-family codec nodes with bindings.
6. Correct MAX98090 codec DAI cells in Snow.

* tag 'samsung-dt-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: correct max98090 DAI argument in Snow
  ARM: dts: s5pv210: add "gpios" suffix to wlf,ldo1ena on Aries
  ARM: dts: exynos: add "gpios" suffix to wlf,ldo1ena on Arndale
  ARM: dts: exynos: add "gpios" suffix to wlf,ldo1ena on Midas
  ARM: dts: exynos: correct SPI nor compatible in SMDK5250
  ARM: dts: exynos: correct SPI nor compatible in SMDKv310
  ARM: dts: exynos: move I2C10 out of soc node on Arndale
  ARM: dts: exynos: drop redundant address/size cells from I2C10 on Arndale
  ARM: dts: exynos: drop default status from I2C10 on Arndale
  ARM: dts: exynos: align status led name with bindings on Origen4210

Link: https://lore.kernel.org/r/20230211113103.58894-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

7 files changed, 24 insertions, 29 deletions

diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index 5f37b751f700..1103e7f92b57 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -85,7 +85,7 @@
 
 	leds {
 		compatible = "gpio-leds";
-		status {
+		led-status {
 			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
 			function = LED_FUNCTION_HEARTBEAT;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index a5dfd7fd49b3..181c99eca675 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -203,7 +203,7 @@
 	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "w25x80";
+		compatible = "winbond,w25x80", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <1000000>;
 
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index d5074fa57142..525f945c4b91 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -653,8 +653,8 @@
 		CPVDD-supply = <&vbatt_reg>;
 		SPKVDD1-supply = <&vbatt_reg>;
 		SPKVDD2-supply = <&vbatt_reg>;
-		wlf,ldo1ena = <&gpj0 4 0>;
-		wlf,ldo2ena = <&gpj0 4 0>;
+		wlf,ldo1ena-gpios = <&gpj0 4 GPIO_ACTIVE_HIGH>;
+		wlf,ldo2ena-gpios = <&gpj0 4 GPIO_ACTIVE_HIGH>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 71c0e87d3a1d..2e3da5670bc2 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -73,6 +73,19 @@
 		};
 	};
 
+	/*
+	 * For unknown reasons HDMI-DDC does not work with Exynos I2C
+	 * controllers. Lets use software I2C over GPIO pins as a workaround.
+	 */
+	i2c_ddc: i2c-10 {
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_gpio_bus>;
+		sda-gpios = <&gpa0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpa0 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+	};
+
 	panel: panel {
 		compatible = "boe,hv070wsa-100";
 		power-supply = <&vcc_3v3_reg>;
@@ -524,8 +537,8 @@
 		SPKVDD1-supply = <&main_dc_reg>;
 		SPKVDD2-supply = <&main_dc_reg>;
 
-		wlf,ldo1ena = <&gpb0 0 GPIO_ACTIVE_HIGH>;
-		wlf,ldo2ena = <&gpb0 1 GPIO_ACTIVE_HIGH>;
+		wlf,ldo1ena-gpios = <&gpb0 0 GPIO_ACTIVE_HIGH>;
+		wlf,ldo2ena-gpios = <&gpb0 1 GPIO_ACTIVE_HIGH>;
 	};
 };
 
@@ -615,24 +628,6 @@
 	status = "okay";
 };
 
-&soc {
-	/*
-	 * For unknown reasons HDMI-DDC does not work with Exynos I2C
-	 * controllers. Lets use software I2C over GPIO pins as a workaround.
-	 */
-	i2c_ddc: i2c-10 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c2_gpio_bus>;
-		status = "okay";
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpa0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpa0 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-};
-
 &usbdrd {
 	vdd10-supply = <&ldo15_reg>;
 	vdd33-supply = <&ldo12_reg>;
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 71293749ac48..831b3494bd46 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -391,7 +391,7 @@
 	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "w25x80";
+		compatible = "winbond,w25x80", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <1000000>;
 
diff --git a/arch/arm/boot/dts/exynos5250-snow-rev5.dts b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
index 0a47597d6f0d..3d32c3476e84 100644
--- a/arch/arm/boot/dts/exynos5250-snow-rev5.dts
+++ b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
@@ -27,7 +27,7 @@
 		};
 
 		codec {
-			sound-dai = <&max98090 0>, <&hdmi>;
+			sound-dai = <&max98090>, <&hdmi>;
 		};
 	};
 };
@@ -42,7 +42,7 @@
 		pinctrl-0 = <&max98090_irq>;
 		clocks = <&pmu_system_controller 0>;
 		clock-names = "mclk";
-		#sound-dai-cells = <1>;
+		#sound-dai-cells = <0>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi
index 964c5fe51755..f628d3660493 100644
--- a/arch/arm/boot/dts/s5pv210-aries.dtsi
+++ b/arch/arm/boot/dts/s5pv210-aries.dtsi
@@ -135,8 +135,8 @@
 					0xa101 0x0100 0x8100 0x0100 0x0100
 					0x0100>;
 
-			wlf,ldo1ena = <&gpf3 4 GPIO_ACTIVE_HIGH>;
-			wlf,ldo2ena = <&gpf3 4 GPIO_ACTIVE_HIGH>;
+			wlf,ldo1ena-gpios = <&gpf3 4 GPIO_ACTIVE_HIGH>;
+			wlf,ldo2ena-gpios = <&gpf3 4 GPIO_ACTIVE_HIGH>;
 
 			wlf,lineout1-se;
 			wlf,lineout2-se;