diff options
| author | Arnd Bergmann <arnd@arndb.de> | 2023-06-20 22:54:14 +0200 |
|---|---|---|
| committer | Arnd Bergmann <arnd@arndb.de> | 2023-06-20 22:54:34 +0200 |
| commit | 055fdcac930b103372ea19a25de6c406fc245be2 (patch) | |
| tree | a57e8b063c3d2b5d2cde1c6d18fb080d3f177608 /arch/arm64 | |
| parent | af3c684721cf69ff662c53a58f02261fa2f8efbe (diff) | |
| parent | c2951581e69c8fef39120068d1ef5b1974d54ff1 (diff) | |
Merge tag 'qcom-arm64-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
More Qualcomm ARM64 DTS changes for v6.5
This introduces support for the Qualcomm SDX75 platform, with the IDP
reference board. On IPQ5332 the RDP474 board is added and on IPQ9574 the
RDP454 is introduced.
On SC8280XP, and hence Lenovo ThinkPad X13s, GPU support is added.
For QDU1000, SDM845, SM670, SC8180X, SM6350 and SM8550 the RSC is added
to the CPU cluster power-domain to flush sleep & wake votes as the
cluster goes down.
On IPQ5332 additional reserved-memory regions to improve post mortem
debugging. UART1 is added. The MI01.2 board is renamed RDP441 and the
RDP474 is added.
On IPQ8074 critical thermal trip points are defined.
As with IPQ5332 additional reserved-memory regions are used to improve
post mortem debugging. Thermal sensors (tsens) are added and zones
defined. The crypto engine is added, and support for the RDP454 board is
added.
Across MSM8916 and MSM8939 pinctrl state definitions are cleaned up and
the purpose of msm8939-pm8916 is documented. MSM8939 has regulator
definitions cleaned up, following to the previous effort on MSM8916.
CPU Bus Fabric scaling support is added to MSM8996 Pro.
On QCM2290 CPU idle states are added.
For QDU1000 SDHCI is introduced and enabled on the IDP to gain eMMC
support. IMEM and PIL information regions are defined for improved post
mortem debugging.
The Qualcomm Robotics RB2 kit gets its on-board buttons described.
A few fixes are introduced for the newly merged SC8180X, in particluar
the DisplayPort blocks are moved to the MMCX power domain to avoid power
being reduced prematurely during boot.
The SC8280XP GPU is added and enabled for the Lenovo Thinkpad X13s,
and resets for the soundwire controllers are added. The OUI is
specified for ethernet phys on SA8540P Ride platform, to avoid reset
issues.
Charger description is added to the PMI8998 PMIC and enabled across
OnePlus 6/6T, SHIFT SHIFT6mq and Xiaomi Pocophone F1.
On SM6350 CPU idle states and UART1 are added. And SM6375 gains GPU
clock controller and IOMMU definitions.
The Fairphone FP4 gains Bluetooth support.
SM8150 is transitioned to use 2 interconnect-cells, and the USB
interconnect path is described to ensure buses are adequately voted for.
The same changes are done for SM8250, and the resolution of the
static framebuffer on Sony Xperia 1 II and 5 II are corrected.
The USB bus paths are also added to SM8350, SM8450 and SM8550.
On SM8550 DisplayPort nodes are added, as is the PWM controller for
driving the notification LED and the RTC is enabled. For the MTP and QRD
boards, the soundcard and audio codecs are defined.
A Tegra change, related to LP855X binding changes, was accidentally
picked up and dropped again later.
A number of DeviceTree fixes identified through validation was
introduced as well. Additionally a few nodes got their default status
changed to avoid unnecessarily having to enable them (e.g. the mdp/dpu
node).
* tag 'qcom-arm64-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (94 commits)
Revert "arm64: dts: adapt to LP855X bindings changes"
arm64: dts: qcom: sc8280xp: Enable GPU related nodes
arm64: dts: qcom: sc8280xp: Add GPU related nodes
arm64: dts: qcom: msm8939-pm8916: Mark always-on regulators
arm64: dts: qcom: msm8939: Define regulator constraints next to usage
arm64: dts: qcom: msm8939-pm8916: Clarify purpose
arm64: dts: qcom: msm8939: Fix regulator constraints
arm64: dts: qcom: msm8939-sony-tulip: Allow disabling pm8916_l6
arm64: dts: qcom: msm8939-sony-tulip: Fix l10-l12 regulator voltages
arm64: dts: qcom: msm8939: Disable lpass_codec by default
arm64: dts: qcom: msm8939-pm8916: Add missing pm8916_codec supplies
arm64: dts: qcom: qrb4210-rb2: Enable on-board buttons
arm64: dts: qcom: msm8916: Drop msm8916-pins.dtsi
arm64: dts: qcom: msm8916/39: Rename wcnss pinctrl
arm64: dts: qcom: msm8916/39: Cleanup audio pinctrl
arm64: dts: qcom: apq8016-sbc: Drop unneeded MCLK pinctrl
arm64: dts: qcom: msm8916/39: Consolidate SDC pinctrl
arm64: dts: qcom: msm8916/39: Fix SD card detect pinctrl
arm64: dts: qcom: msm8996: rename labels for HDMI nodes
arm64: dts: qcom: sm8250: rename labels for DSI nodes
...
Link: https://lore.kernel.org/r/20230615162043.1461624-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'arch/arm64')
97 files changed, 4193 insertions, 1835 deletions
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 4f9e81253e18..337abc4ceb17 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -4,9 +4,10 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8039-t2.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb -dtb-$(CONFIG_ARCH_QCOM) += ipq5332-mi01.2.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp441.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp442.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp468.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp474.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb @@ -15,6 +16,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp418.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp433.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp449.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp453.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp454.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-acer-a1-724.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb @@ -182,6 +184,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-polaris.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-shift-axolotl.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdx75-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm4250-oneplus-billie2.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6115-fxtec-pro1x.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6115p-lenovo-j606f.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts index 56dfca61253e..f3d65a606194 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts @@ -370,18 +370,14 @@ &sdhc_1 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; }; &sdhc_2 { status = "okay"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; @@ -389,8 +385,8 @@ &sound { status = "okay"; - pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>; - pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>; + pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>; + pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>; pinctrl-names = "default", "sleep"; model = "DB410c"; audio-routing = @@ -642,6 +638,13 @@ "USR_LED_2_CTRL", /* GPIO 120 */ "SB_HS_ID"; + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + tlmm_leds: tlmm-leds-state { pins = "gpio21", "gpio120"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/apq8039-t2.dts b/arch/arm64/boot/dts/qcom/apq8039-t2.dts index e783b0af355e..40644c242fb7 100644 --- a/arch/arm64/boot/dts/qcom/apq8039-t2.dts +++ b/arch/arm64/boot/dts/qcom/apq8039-t2.dts @@ -135,6 +135,10 @@ status = "okay"; }; +&lpass_codec { + status = "okay"; +}; + &mdss { status = "okay"; }; @@ -154,108 +158,7 @@ "PM_GPIO4"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - pm8916_s3: s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - pm8916_s4: s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - /* l1 is fixed to 1225000, but not connected in schematic */ - - pm8916_l2: l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - pm8916_l4: l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - pm8916_l5: l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pm8916_l6: l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pm8916_l7: l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pm8916_l8: l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - pm8916_l9: l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - pm8916_l10: l10 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - pm8916_l11: l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - pm8916_l12: l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - pm8916_l13: l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - pm8916_l14: l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - pm8916_l15: l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - pm8916_l16: l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - pm8916_l17: l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - pm8916_l18: l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - &sdhc_1 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_default_state>; - pinctrl-1 = <&sdc1_sleep_state>; status = "okay"; }; @@ -263,8 +166,8 @@ model = "apq8039-square-sndcard"; audio-routing = "AMIC2", "MIC BIAS Internal2"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&cdc_pdm_lines_default>; - pinctrl-1 = <&cdc_pdm_lines_sleep>; + pinctrl-0 = <&cdc_pdm_default>; + pinctrl-1 = <&cdc_pdm_sleep>; internal-codec-playback-dai-link { link-name = "WCD"; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts index b599909c4463..537547b97459 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts @@ -208,25 +208,6 @@ status = "okay"; }; -&hdmi { - status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>; - pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>; - - core-vdda-supply = <&vreg_l12a_1p8>; - core-vcc-supply = <&vreg_s4a_1p8>; -}; - -&hdmi_phy { - status = "okay"; - - vddio-supply = <&vreg_l12a_1p8>; - vcca-supply = <&vreg_l28a_0p925>; - #phy-cells = <0>; -}; - &hsusb_phy1 { status = "okay"; @@ -251,6 +232,25 @@ status = "okay"; }; +&mdss_hdmi { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mdss_hdmi_hpd_active &mdss_hdmi_ddc_active>; + pinctrl-1 = <&mdss_hdmi_hpd_suspend &mdss_hdmi_ddc_suspend>; + + core-vdda-supply = <&vreg_l12a_1p8>; + core-vcc-supply = <&vreg_s4a_1p8>; +}; + +&mdss_hdmi_phy { + status = "okay"; + + vddio-supply = <&vreg_l12a_1p8>; + vcca-supply = <&vreg_l28a_0p925>; + #phy-cells = <0>; +}; + &mmcc { vdd-gfx-supply = <&vdd_gfx>; }; @@ -433,28 +433,28 @@ drive-strength = <2>; }; - hdmi_hpd_active: hdmi-hpd-active-state { + mdss_hdmi_hpd_active: mdss_hdmi-hpd-active-state { pins = "gpio34"; function = "hdmi_hot"; bias-pull-down; drive-strength = <16>; }; - hdmi_hpd_suspend: hdmi-hpd-suspend-state { + mdss_hdmi_hpd_suspend: mdss_hdmi-hpd-suspend-state { pins = "gpio34"; function = "hdmi_hot"; bias-pull-down; drive-strength = <2>; }; - hdmi_ddc_active: hdmi-ddc-active-state { + mdss_hdmi_ddc_active: mdss_hdmi-ddc-active-state { pins = "gpio32", "gpio33"; function = "hdmi_ddc"; drive-strength = <2>; bias-pull-up; }; - hdmi_ddc_suspend: hdmi-ddc-suspend-state { + mdss_hdmi_ddc_suspend: mdss_hdmi-ddc-suspend-state { pins = "gpio32", "gpio33"; function = "hdmi_ddc"; drive-strength = <2>; @@ -1043,7 +1043,7 @@ }; }; - hdmi-dai-link { + mdss_hdmi-dai-link { link-name = "HDMI"; cpu { sound-dai = <&q6afedai HDMI_RX>; @@ -1054,7 +1054,7 @@ }; codec { - sound-dai = <&hdmi 0>; + sound-dai = <&mdss_hdmi 0>; }; }; diff --git a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts index ed2e2f6c6775..ac6471d1db1f 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts @@ -92,15 +92,15 @@ status = "okay"; }; -&hdmi { +&mdss { status = "okay"; }; -&hdmi_phy { +&mdss_hdmi { status = "okay"; }; -&mdss { +&mdss_hdmi_phy { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts index 3af1d5556950..3af1d5556950 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts new file mode 100644 index 000000000000..53c68d8c5e5d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * IPQ5332 RDP474 board device tree source + * + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "ipq5332.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ5332 MI01.9"; + compatible = "qcom,ipq5332-ap-mi01.9", "qcom,ipq5332"; + + aliases { + serial0 = &blsp1_uart0; + }; + + chosen { + stdout-path = "serial0"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&gpio_keys_default_state>; + pinctrl-names = "default"; + + button-wps { + label = "wps"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + debounce-interval = <60>; + }; + }; +}; + +&blsp1_uart0 { + pinctrl-0 = <&serial_0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&blsp1_i2c1 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c_1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhc { + bus-width = <4>; + max-frequency = <192000000>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + non-removable; + pinctrl-0 = <&sdc_default_state>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&xo_board { + clock-frequency = <24000000>; +}; + +/* PINCTRL */ + +&tlmm { + gpio_keys_default_state: gpio-keys-default-state { + pins = "gpio35"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + i2c_1_pins: i2c-1-state { + pins = "gpio29", "gpio30"; + function = "blsp1_i2c0"; + drive-strength = <8>; + bias-pull-up; + }; + + sdc_default_state: sdc-default-state { + clk-pins { + pins = "gpio13"; + function = "sdc_clk"; + drive-strength = <8>; + bias-disable; + }; + + cmd-pins { + pins = "gpio12"; + function = "sdc_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + + data-pins { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "sdc_data"; + drive-strength = <8>; + bias-pull-up; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi index 47984037f0a5..b4558871ed21 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi @@ -114,6 +114,16 @@ #size-cells = <2>; ranges; + bootloader@4a100000 { + reg = <0x0 0x4a100000 0x0 0x400000>; + no-map; + }; + + sbl@4a500000 { + reg = <0x0 0x4a500000 0x0 0x100000>; + no-map; + }; + tz_mem: tz@4a600000 { reg = <0x0 0x4a600000 0x0 0x200000>; no-map; @@ -121,7 +131,7 @@ smem@4a800000 { compatible = "qcom,smem"; - reg = <0x0 0x4a800000 0x0 0x00100000>; + reg = <0x0 0x4a800000 0x0 0x100000>; no-map; hwlocks = <&tcsr_mutex 0>; @@ -225,6 +235,18 @@ status = "disabled"; }; + blsp1_uart1: serial@78b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b0000 0x200>; + interrupts = <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 2>, <&blsp_dma 3>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + blsp1_spi0: spi@78b5000 { compatible = "qcom,spi-qup-v2.2.1"; reg = <0x078b5000 0x600>; diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index 40565ce635dd..2723a7a50e2b 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -932,6 +932,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 4>; + + trips { + nss-top-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; nss0-thermal { @@ -939,6 +947,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 5>; + + trips { + nss-0-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; nss1-thermal { @@ -946,6 +962,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 6>; + + trips { + nss-1-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; wcss-phya0-thermal { @@ -953,6 +977,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 7>; + + trips { + wcss-phya0-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; wcss-phya1-thermal { @@ -960,6 +992,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 8>; + + trips { + wcss-phya1-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; cpu0_thermal: cpu0-thermal { @@ -967,6 +1007,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 9>; + + trips { + cpu0-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; cpu1_thermal: cpu1-thermal { @@ -974,6 +1022,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 10>; + + trips { + cpu1-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; cpu2_thermal: cpu2-thermal { @@ -981,6 +1037,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 11>; + + trips { + cpu2-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; cpu3_thermal: cpu3-thermal { @@ -988,6 +1052,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 12>; + + trips { + cpu3-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; cluster_thermal: cluster-thermal { @@ -995,6 +1067,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 13>; + + trips { + cluster-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; wcss-phyb0-thermal { @@ -1002,6 +1082,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 14>; + + trips { + wcss-phyb0-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; wcss-phyb1-thermal { @@ -1009,6 +1097,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 15>; + + trips { + wcss-phyb1-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts new file mode 100644 index 000000000000..6efae3426cb8 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * IPQ9574 RDP454 board device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "ipq9574.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C9"; + compatible = "qcom,ipq9574-ap-al02-c9", "qcom,ipq9574"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&blsp1_spi0 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + compatible = "micron,n25q128a11", "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + }; +}; + +&blsp1_uart2 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-mp5496-regulators"; + + ipq9574_s1: s1 { + /* + * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. + * During regulator registration, kernel not knowing the initial voltage, + * considers it as zero and brings up the regulators with minimum supported voltage. + * Update the regulator-min-microvolt with SVS voltage of 725mV so that + * the regulators are brought up with 725mV which is sufficient for all the + * corner parts to operate at 800MHz + */ + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1075000>; + }; + }; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + spi_0_pins: spi-0-state { + pins = "gpio11", "gpio12", "gpio13", "gpio14"; + function = "blsp0_spi"; + drive-strength = <8>; + bias-disable; + }; +}; + +&xo_board_clk { + clock-frequency = <24000000>; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi index 988107a9edc4..bb71e599fbe4 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi @@ -155,6 +155,16 @@ #size-cells = <2>; ranges; + bootloader@4a100000 { + reg = <0x0 0x4a100000 0x0 0x400000>; + no-map; + }; + + sbl@4a500000 { + reg = <0x0 0x4a500000 0x0 0x100000>; + no-map; + }; + tz_region: tz@4a600000 { reg = <0x0 0x4a600000 0x0 0x400000>; no-map; @@ -162,7 +172,7 @@ smem@4aa00000 { compatible = "qcom,smem"; - reg = <0x0 0x4aa00000 0x0 0x00100000>; + reg = <0x0 0x4aa00000 0x0 0x100000>; hwlocks = <&tcsr_mutex 0>; no-map; }; @@ -205,6 +215,36 @@ #size-cells = <1>; }; + cryptobam: dma-controller@704000 { + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; + reg = <0x00704000 0x20000>; + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + qcom,ee = <1>; + qcom,controlled-remotely; + }; + + crypto: crypto@73a000 { + compatible = "qcom,ipq9574-qce", "qcom,ipq4019-qce", "qcom,qce"; + reg = <0x0073a000 0x6000>; + clocks = <&gcc GCC_CRYPTO_AHB_CLK>, + <&gcc GCC_CRYPTO_AXI_CLK>, + <&gcc GCC_CRYPTO_CLK>; + clock-names = "iface", "bus", "core"; + dmas = <&cryptobam 2>, <&cryptobam 3>; + dma-names = "rx", "tx"; + }; + + tsens: thermal-sensor@4a9000 { + compatible = "qcom,ipq9574-tsens", "qcom,ipq8074-tsens"; + reg = <0x004a9000 0x1000>, + <0x004a8000 0x1000>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "combined"; + #qcom,sensors = <16>; + #thermal-sensor-cells = <1>; + }; + tlmm: pinctrl@1000000 { compatible = "qcom,ipq9574-tlmm"; reg = <0x01000000 0x300000>; @@ -581,6 +621,214 @@ }; }; + thermal-zones { + nss-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 3>; + + trips { + nss-top-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + ubi-0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 4>; + + trips { + ubi_0-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + ubi-1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 5>; + + trips { + ubi_1-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + ubi-2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 6>; + + trips { + ubi_2-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + ubi-3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 7>; + + trips { + ubi_3-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 8>; + + trips { + cpu-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 9>; + + trips { + cpu-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 10>; + + trips { + cpu-critical { + temperature = <120000>; + hysteresis = <10000>; + type = "critical"; + }; + + cpu-passive { + temperature = <110000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 11>; + + trips { + cpu-critical { + temperature = <120000>; + hysteresis = <10000>; + type = "critical"; + }; + + cpu-passive { + temperature = <110000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 12>; + + trips { + cpu-critical { + temperature = <120000>; + hysteresis = <10000>; + type = "critical"; + }; + + cpu-passive { + temperature = <110000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 13>; + + trips { + cpu-critical { + temperature = <120000>; + hysteresis = <10000>; + type = "critical"; + }; + + cpu-passive { + temperature = <110000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + wcss-phyb-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 14>; + + trips { + wcss_phyb-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + top-glue-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 15>; + + trips { + top_glue-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, diff --git a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts index 5025c08e4817..5ad49fe999db 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts @@ -133,17 +133,13 @@ }; &sdhc_1 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; - status = "okay"; }; &sdhc_2 { pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>; @@ -184,6 +180,13 @@ bias-pull-up; }; + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + touchscreen_default: touchscreen-default-state { reset-pins { pins = "gpio12"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts index 7b629243ef0d..1c43f3d6a0b4 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts @@ -171,18 +171,14 @@ &sdhc_1 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; }; &sdhc_2 { status = "okay"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; @@ -276,6 +272,13 @@ bias-pull-up; }; + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + ts_int_reset_default: ts-int-reset-default-state { pins = "gpio13", "gpio100"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts index b8c217b04a3b..92f695481769 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts @@ -139,10 +139,6 @@ &sdhc_1 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; }; &sdhc_2 { @@ -150,8 +146,8 @@ vmmc-supply = <®_sd_vmmc>; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; @@ -205,6 +201,13 @@ bias-disable; }; + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + touchscreen_default: touchscreen-default-state { touch-pins { pins = "gpio13"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts index 56c42b0c9733..f4dbc515c47a 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts @@ -128,16 +128,12 @@ }; &sdhc_1 { - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; - pinctrl-names = "default", "sleep"; - status = "okay"; }; &sdhc_2 { - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; pinctrl-names = "default", "sleep"; cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; @@ -184,6 +180,13 @@ bias-disable; }; + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + touchscreen_default: touchscreen-default-state { reset-pins { pins = "gpio12"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts index 175ca011998c..4239c8fda11b 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts @@ -260,18 +260,14 @@ &sdhc_1 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; }; &sdhc_2 { status = "okay"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdhc2_cd_default>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdhc2_cd_default>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; /* * The Huawei device tree sets cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>. @@ -299,8 +295,8 @@ "AMIC3", "MIC BIAS External1"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&cdc_pdm_lines_act>; - pinctrl-1 = <&cdc_pdm_lines_sus>; + pinctrl-0 = <&cdc_pdm_default>; + pinctrl-1 = <&cdc_pdm_sleep>; primary-dai-link { link-name = "WCD"; @@ -397,7 +393,7 @@ bias-disable; }; - sdhc2_cd_default: sdhc2-cd-default-state { + sdc2_cd_default: sdc2-cd-default-state { pins = "gpio56"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts index 9560ba632c6f..97262b8519b3 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts @@ -242,19 +242,10 @@ &sdhc_1 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; }; &sdhc_2 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; - non-removable; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts index f23cfb2bf793..9757182fba3e 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts @@ -125,18 +125,14 @@ &sdhc_1 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; }; &sdhc_2 { status = "okay"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; @@ -190,6 +186,13 @@ bias-disable; }; + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + usb_id_default: usb-id-default-state { pins = "gpio110"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi deleted file mode 100644 index 1b60d42a13c7..000000000000 --- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi +++ /dev/null @@ -1,582 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. - */ - -&tlmm { - - blsp_uart1_default: blsp-uart1-default-state { - /* TX, RX, CTS_N, RTS_N */ - pins = "gpio0", "gpio1", "gpio2", "gpio3"; - function = "blsp_uart1"; - - drive-strength = <16>; - bias-disable; - }; - - blsp_uart1_sleep: blsp-uart1-sleep-state { - pins = "gpio0", "gpio1", "gpio2", "gpio3"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-down; - }; - - blsp_uart2_default: blsp-uart2-default-state { - pins = "gpio4", "gpio5"; - function = "blsp_uart2"; - - drive-strength = <16>; - bias-disable; - }; - - blsp_uart2_sleep: blsp-uart2-sleep-state { - pins = "gpio4", "gpio5"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-down; - }; - - blsp_spi1_default: blsp-spi1-default-state { - spi-pins { - pins = "gpio0", "gpio1", "gpio3"; - function = "blsp_spi1"; - - drive-strength = <12>; - bias-disable; - }; - cs-pins { - pins = "gpio2"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - output-high; - }; - }; - - blsp_spi1_sleep: blsp-spi1-sleep-state { - pins = "gpio0", "gpio1", "gpio2", "gpio3"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-down; - }; - - blsp_spi2_default: blsp-spi2-default-state { - spi-pins { - pins = "gpio4", "gpio5", "gpio7"; - function = "blsp_spi2"; - - drive-strength = <12>; - bias-disable; - }; - cs-pins { - pins = "gpio6"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - output-high; - }; - }; - - blsp_spi2_sleep: blsp-spi2-sleep-state { - pins = "gpio4", "gpio5", "gpio6", "gpio7"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-down; - }; - - blsp_spi3_default: blsp-spi3-default-state { - spi-pins { - pins = "gpio8", "gpio9", "gpio11"; - function = "blsp_spi3"; - - drive-strength = <12>; - bias-disable; - }; - cs-pins { - pins = "gpio10"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - output-high; - }; - }; - - blsp_spi3_sleep: blsp-spi3-sleep-state { - pins = "gpio8", "gpio9", "gpio10", "gpio11"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-down; - }; - - blsp_spi4_default: blsp-spi4-default-state { - spi-pins { - pins = "gpio12", "gpio13", "gpio15"; - function = "blsp_spi4"; - - drive-strength = <12>; - bias-disable; - }; - cs-pins { - pins = "gpio14"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - output-high; - }; - }; - - blsp_spi4_sleep: blsp-spi4-sleep-state { - pins = "gpio12", "gpio13", "gpio14", "gpio15"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-down; - }; - - blsp_spi5_default: blsp-spi5-default-state { - spi-pins { - pins = "gpio16", "gpio17", "gpio19"; - function = "blsp_spi5"; - - drive-strength = <12>; - bias-disable; - }; - cs-pins { - pins = "gpio18"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - output-high; - }; - }; - - blsp_spi5_sleep: blsp-spi5-sleep-state { - pins = "gpio16", "gpio17", "gpio18", "gpio19"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-down; - }; - - blsp_spi6_default: blsp-spi6-default-state { - spi-pins { - pins = "gpio20", "gpio21", "gpio23"; - function = "blsp_spi6"; - - drive-strength = <12>; - bias-disable; - }; - cs-pins { - pins = "gpio22"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - output-high; - }; - }; - - blsp_spi6_sleep: blsp-spi6-sleep-state { - pins = "gpio20", "gpio21", "gpio22", "gpio23"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-down; - }; - - blsp_i2c1_default: blsp-i2c1-default-state { - pins = "gpio2", "gpio3"; - function = "blsp_i2c1"; - - drive-strength = <2>; - bias-disable; - }; - - blsp_i2c1_sleep: blsp-i2c1-sleep-state { - pins = "gpio2", "gpio3"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - blsp_i2c2_default: blsp-i2c2-default-state { - pins = "gpio6", "gpio7"; - function = "blsp_i2c2"; - - drive-strength = <2>; - bias-disable; - }; - - blsp_i2c2_sleep: blsp-i2c2-sleep-state { - pins = "gpio6", "gpio7"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - blsp_i2c3_default: blsp-i2c3-default-state { - pins = "gpio10", "gpio11"; - function = "blsp_i2c3"; - - drive-strength = <2>; - bias-disable; - }; - - blsp_i2c3_sleep: blsp-i2c3-sleep-state { - pins = "gpio10", "gpio11"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - blsp_i2c4_default: blsp-i2c4-default-state { - pins = "gpio14", "gpio15"; - function = "blsp_i2c4"; - - drive-strength = <2>; - bias-disable; - }; - - blsp_i2c4_sleep: blsp-i2c4-sleep-state { - pins = "gpio14", "gpio15"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - blsp_i2c5_default: blsp-i2c5-default-state { - pins = "gpio18", "gpio19"; - function = "blsp_i2c5"; - - drive-strength = <2>; - bias-disable; - }; - - blsp_i2c5_sleep: blsp-i2c5-sleep-state { - pins = "gpio18", "gpio19"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - blsp_i2c6_default: blsp-i2c6-default-state { - pins = "gpio22", "gpio23"; - function = "blsp_i2c6"; - - drive-strength = <2>; - bias-disable; - }; - - blsp_i2c6_sleep: blsp-i2c6-sleep-state { - pins = "gpio22", "gpio23"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - pmx-sdc1-clk-state { - sdc1_clk_on: clk-on-pins { - pins = "sdc1_clk"; - - bias-disable; - drive-strength = <16>; - }; - sdc1_clk_off: clk-off-pins { - pins = "sdc1_clk"; - - bias-disable; - drive-strength = <2>; - }; - }; - - pmx-sdc1-cmd-state { - sdc1_cmd_on: cmd-on-pins { - pins = "sdc1_cmd"; - - bias-pull-up; - drive-strength = <10>; - }; - sdc1_cmd_off: cmd-off-pins { - pins = "sdc1_cmd"; - - bias-pull-up; - drive-strength = <2>; - }; - }; - - pmx-sdc1-data-state { - sdc1_data_on: data-on-pins { - pins = "sdc1_data"; - - bias-pull-up; - drive-strength = <10>; - }; - sdc1_data_off: data-off-pins { - pins = "sdc1_data"; - - bias-pull-up; - drive-strength = <2>; - }; - }; - - pmx-sdc2-clk-state { - sdc2_clk_on: clk-on-pins { - pins = "sdc2_clk"; - - bias-disable; - drive-strength = <16>; - }; - sdc2_clk_off: clk-off-pins { - pins = "sdc2_clk"; - - bias-disable; - drive-strength = <2>; - }; - }; - - pmx-sdc2-cmd-state { - sdc2_cmd_on: cmd-on-pins { - pins = "sdc2_cmd"; - - bias-pull-up; - drive-strength = <10>; - }; - sdc2_cmd_off: cmd-off-pins { - pins = "sdc2_cmd"; - - bias-pull-up; - drive-strength = <2>; - }; - }; - - pmx-sdc2-data-state { - sdc2_data_on: data-on-pins { - pins = "sdc2_data"; - - bias-pull-up; - drive-strength = <10>; - }; - sdc2_data_off: data-off-pins { - pins = "sdc2_data"; - - bias-pull-up; - drive-strength = <2>; - }; - }; - - pmx-sdc2-cd-pin-state { - sdc2_cd_on: cd-on-pins { - pins = "gpio38"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-up; - }; - sdc2_cd_off: cd-off-pins { - pins = "gpio38"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - }; - - cdc-pdm-lines-state { - cdc_pdm_lines_act: pdm-lines-on-pins { - pins = "gpio63", "gpio64", "gpio65", "gpio66", - "gpio67", "gpio68"; - function = "cdc_pdm0"; - - drive-strength = <8>; - bias-disable; - }; - cdc_pdm_lines_sus: pdm-lines-off-pins { - pins = "gpio63", "gpio64", "gpio65", "gpio66", - "gpio67", "gpio68"; - function = "cdc_pdm0"; - - drive-strength = <2>; - bias-pull-down; - }; - }; - - ext-pri-tlmm-lines-state { - ext_pri_tlmm_lines_act: ext-pa-on-pins { - pins = "gpio113", "gpio114", "gpio115", "gpio116"; - function = "pri_mi2s"; - - drive-strength = <8>; - bias-disable; - }; - ext_pri_tlmm_lines_sus: ext-pa-off-pins { - pins = "gpio113", "gpio114", "gpio115", "gpio116"; - function = "pri_mi2s"; - - drive-strength = <2>; - bias-disable; - }; - }; - - ext-pri-ws-line-state { - ext_pri_ws_act: ext-pa-on-pins { - pins = "gpio110"; - function = "pri_mi2s_ws"; - - drive-strength = <8>; - bias-disable; - }; - ext_pri_ws_sus: ext-pa-off-pins { - pins = "gpio110"; - function = "pri_mi2s_ws"; - - drive-strength = <2>; - bias-disable; - }; - }; - - ext-mclk-tlmm-lines-state { - ext_mclk_tlmm_lines_act: mclk-lines-on-pins { - pins = "gpio116"; - function = "pri_mi2s"; - - drive-strength = <8>; - bias-disable; - }; - ext_mclk_tlmm_lines_sus: mclk-lines-off-pins { - pins = "gpio116"; - function = "pri_mi2s"; - - drive-strength = <2>; - bias-disable; - }; - }; - - /* secondary Mi2S */ - ext-sec-tlmm-lines-state { - ext_sec_tlmm_lines_act: tlmm-lines-on-pins { - pins = "gpio112", "gpio117", "gpio118", "gpio119"; - function = "sec_mi2s"; - - drive-strength = <8>; - bias-disable; - }; - ext_sec_tlmm_lines_sus: tlmm-lines-off-pins { - pins = "gpio112", "gpio117", "gpio118", "gpio119"; - function = "sec_mi2s"; - - drive-strength = <2>; - bias-disable; - }; - }; - - cdc_dmic_lines_act: cdc-dmic-lines-on-state { - clk-pins { - pins = "gpio0"; - function = "dmic0_clk"; - - drive-strength = <8>; - }; - data-pins { - pins = "gpio1"; - function = "dmic0_data"; - - drive-strength = <8>; - }; - }; - cdc_dmic_lines_sus: cdc-dmic-lines-off-state { - clk-pins { - pins = "gpio0"; - function = "dmic0_clk"; - - drive-strength = <2>; - bias-disable; - }; - data-pins { - pins = "gpio1"; - function = "dmic0_data"; - - drive-strength = <2>; - bias-disable; - }; - }; - - wcnss_pin_a: wcnss-active-state { - pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44"; - function = "wcss_wlan"; - - drive-strength = <6>; - bias-pull-up; - }; - - cci0_default: cci0-default-state { - pins = "gpio29", "gpio30"; - function = "cci_i2c"; - - drive-strength = <16>; - bias-disable; - }; - - camera_front_default: camera-front-default-state { - pwdn-pins { - pins = "gpio33"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - }; - rst-pins { - pins = "gpio28"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - }; - mclk1-pins { - pins = "gpio27"; - function = "cam_mclk1"; - - drive-strength = <16>; - bias-disable; - }; - }; - - camera_rear_default: camera-rear-default-state { - pwdn-pins { - pins = "gpio34"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - }; - rst-pins { - pins = "gpio35"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - }; - mclk0-pins { - pins = "gpio26"; - function = "cam_mclk0"; - - drive-strength = <16>; - bias-disable; - }; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi index 895036fb6eb8..019bf73178fa 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -263,18 +263,14 @@ &sdhc_1 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; }; &sdhc_2 { status = "okay"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; @@ -391,6 +387,13 @@ bias-disable; }; + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + tkey_default: tkey-default-state { pins = "gpio98"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi index 94cfb3200496..7943bb619116 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi @@ -135,16 +135,12 @@ }; &sdhc_1 { - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; - pinctrl-names = "default", "sleep"; - status = "okay"; }; &sdhc_2 { - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; pinctrl-names = "default", "sleep"; cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; @@ -199,4 +195,11 @@ drive-strength = <2>; bias-disable; }; + + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi index f2a5800f1605..f4fd5d72b28b 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi @@ -97,18 +97,14 @@ &sdhc_1 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; }; &sdhc_2 { status = "okay"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; @@ -162,4 +158,11 @@ drive-strength = <2>; bias-disable; }; + + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts index 3637e7d80d0a..15dc246e84e2 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts @@ -276,19 +276,10 @@ &sdhc_1 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; }; &sdhc_2 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; - non-removable; /* diff --git a/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi b/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi index dafa5bd82328..004a129a2ee2 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi @@ -101,10 +101,6 @@ }; &sdhc_1 { - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; - pinctrl-names = "default", "sleep"; - status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts index 733917531218..c94d36b38651 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts @@ -173,19 +173,10 @@ &sdhc_1 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; }; &sdhc_2 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; - non-removable; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index cc5d3cf64721..21d54e6684e6 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -996,6 +996,485 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + + blsp_i2c1_default: blsp-i2c1-default-state { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c1_sleep: blsp-i2c1-sleep-state { + pins = "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c2_default: blsp-i2c2-default-state { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c2_sleep: blsp-i2c2-sleep-state { + pins = "gpio6", "gpio7"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c3_default: blsp-i2c3-default-state { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c3_sleep: blsp-i2c3-sleep-state { + pins = "gpio10", "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c4_default: blsp-i2c4-default-state { + pins = "gpio14", "gpio15"; + function = "blsp_i2c4"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c4_sleep: blsp-i2c4-sleep-state { + pins = "gpio14", "gpio15"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c5_default: blsp-i2c5-default-state { + pins = "gpio18", "gpio19"; + function = "blsp_i2c5"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c5_sleep: blsp-i2c5-sleep-state { + pins = "gpio18", "gpio19"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c6_default: blsp-i2c6-default-state { + pins = "gpio22", "gpio23"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-disable; + }; + + blsp_i2c6_sleep: blsp-i2c6-sleep-state { + pins = "gpio22", "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp_spi1_default: blsp-spi1-default-state { + spi-pins { + pins = "gpio0", "gpio1", "gpio3"; + function = "blsp_spi1"; + drive-strength = <12>; + bias-disable; + }; + cs-pins { + pins = "gpio2"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp_spi1_sleep: blsp-spi1-sleep-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_spi2_default: blsp-spi2-default-state { + spi-pins { + pins = "gpio4", "gpio5", "gpio7"; + function = "blsp_spi2"; + drive-strength = <12>; + bias-disable; + }; + cs-pins { + pins = "gpio6"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp_spi2_sleep: blsp-spi2-sleep-state { + pins = "gpio4", "gpio5", "gpio6", "gpio7"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_spi3_default: blsp-spi3-default-state { + spi-pins { + pins = "gpio8", "gpio9", "gpio11"; + function = "blsp_spi3"; + drive-strength = <12>; + bias-disable; + }; + cs-pins { + pins = "gpio10"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp_spi3_sleep: blsp-spi3-sleep-state { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_spi4_default: blsp-spi4-default-state { + spi-pins { + pins = "gpio12", "gpio13", "gpio15"; + function = "blsp_spi4"; + drive-strength = <12>; + bias-disable; + }; + cs-pins { + pins = "gpio14"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp_spi4_sleep: blsp-spi4-sleep-state { + pins = "gpio12", "gpio13", "gpio14", "gpio15"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_spi5_default: blsp-spi5-default-state { + spi-pins { + pins = "gpio16", "gpio17", "gpio19"; + function = "blsp_spi5"; + drive-strength = <12>; + bias-disable; + }; + cs-pins { + pins = "gpio18"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp_spi5_sleep: blsp-spi5-sleep-state { + pins = "gpio16", "gpio17", "gpio18", "gpio19"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_spi6_default: blsp-spi6-default-state { + spi-pins { + pins = "gpio20", "gpio21", "gpio23"; + function = "blsp_spi6"; + drive-strength = <12>; + bias-disable; + }; + cs-pins { + pins = "gpio22"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp_spi6_sleep: blsp-spi6-sleep-state { + pins = "gpio20", "gpio21", "gpio22", "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_uart1_default: blsp-uart1-default-state { + /* TX, RX, CTS_N, RTS_N */ + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "blsp_uart1"; + drive-strength = <16>; + bias-disable; + }; + + blsp_uart1_sleep: blsp-uart1-sleep-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp_uart2_default: blsp-uart2-default-state { + pins = "gpio4", "gpio5"; + function = "blsp_uart2"; + drive-strength = <16>; + bias-disable; + }; + + blsp_uart2_sleep: blsp-uart2-sleep-state { + pins = "gpio4", "gpio5"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + camera_front_default: camera-front-default-state { + pwdn-pins { + pins = "gpio33"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + rst-pins { + pins = "gpio28"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + mclk1-pins { + pins = "gpio27"; + function = "cam_mclk1"; + drive-strength = <16>; + bias-disable; + }; + }; + + camera_rear_default: camera-rear-default-state { + pwdn-pins { + pins = "gpio34"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + rst-pins { + pins = "gpio35"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + mclk0-pins { + pins = "gpio26"; + function = "cam_mclk0"; + drive-strength = <16>; + bias-disable; + }; + }; + + cci0_default: cci0-default-state { + pins = "gpio29", "gpio30"; + function = "cci_i2c"; + drive-strength = <16>; + bias-disable; + }; + + cdc_dmic_default: cdc-dmic-default-state { + clk-pins { + pins = "gpio0"; + function = "dmic0_clk"; + drive-strength = <8>; + }; + data-pins { + pins = "gpio1"; + function = "dmic0_data"; + drive-strength = <8>; + }; + }; + + cdc_dmic_sleep: cdc-dmic-sleep-state { + clk-pins { + pins = "gpio0"; + function = "dmic0_clk"; + drive-strength = <2>; + bias-disable; + }; + data-pins { + pins = "gpio1"; + function = "dmic0_data"; + drive-strength = <2>; + bias-disable; + }; + }; + + cdc_pdm_default: cdc-pdm-default-state { + pins = "gpio63", "gpio64", "gpio65", "gpio66", + "gpio67", "gpio68"; + function = "cdc_pdm0"; + drive-strength = <8>; + bias-disable; + }; + + cdc_pdm_sleep: cdc-pdm-sleep-state { + pins = "gpio63", "gpio64", "gpio65", "gpio66", + "gpio67", "gpio68"; + function = "cdc_pdm0"; + drive-strength = <2>; + bias-pull-down; + }; + + pri_mi2s_default: mi2s-pri-default-state { + pins = "gpio113", "gpio114", "gpio115", "gpio116"; + function = "pri_mi2s"; + drive-strength = <8>; + bias-disable; + }; + + pri_mi2s_sleep: mi2s-pri-sleep-state { + pins = "gpio113", "gpio114", "gpio115", "gpio116"; + function = "pri_mi2s"; + drive-strength = <2>; + bias-disable; + }; + + pri_mi2s_mclk_default: mi2s-pri-mclk-default-state { + pins = "gpio116"; + function = "pri_mi2s"; + drive-strength = <8>; + bias-disable; + }; + + pri_mi2s_mclk_sleep: mi2s-pri-mclk-sleep-state { + pins = "gpio116"; + function = "pri_mi2s"; + drive-strength = <2>; + bias-disable; + }; + + pri_mi2s_ws_default: mi2s-pri-ws-default-state { + pins = "gpio110"; + function = "pri_mi2s_ws"; + drive-strength = <8>; + bias-disable; + }; + + pri_mi2s_ws_sleep: mi2s-pri-ws-sleep-state { + pins = "gpio110"; + function = "pri_mi2s_ws"; + drive-strength = <2>; + bias-disable; + }; + + sec_mi2s_default: mi2s-sec-default-state { + pins = "gpio112", "gpio117", "gpio118", "gpio119"; + function = "sec_mi2s"; + drive-strength = <8>; + bias-disable; + }; + + sec_mi2s_sleep: mi2s-sec-sleep-state { + pins = "gpio112", "gpio117", "gpio118", "gpio119"; + function = "sec_mi2s"; + drive-strength = <2>; + bias-disable; + }; + + sdc1_default: sdc1-default-state { + clk-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + cmd-pins { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + data-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + + sdc1_sleep: sdc1-sleep-state { + clk-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + cmd-pins { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + data-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_default: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + + sdc2_sleep: sdc2-sleep-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + wcss_wlan_default: wcss-wlan-default-state { + pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44"; + function = "wcss_wlan"; + drive-strength = <6>; + bias-pull-up; + }; }; gcc: clock-controller@1800000 { @@ -1561,6 +2040,9 @@ <&gcc GCC_SDCC1_APPS_CLK>, <&xo_board>; clock-names = "iface", "core", "xo"; + pinctrl-0 = <&sdc1_default>; + pinctrl-1 = <&sdc1_sleep>; + pinctrl-names = "default", "sleep"; mmc-ddr-1_8v; bus-width = <8>; non-removable; @@ -1579,6 +2061,9 @@ <&gcc GCC_SDCC2_APPS_CLK>, <&xo_board>; clock-names = "iface", "core", "xo"; + pinctrl-0 = <&sdc2_default>; + pinctrl-1 = <&sdc2_sleep>; + pinctrl-names = "default", "sleep"; bus-width = <4>; status = "disabled"; }; @@ -1888,7 +2373,7 @@ qcom,smem-state-names = "stop"; pinctrl-names = "default"; - pinctrl-0 = <&wcnss_pin_a>; + pinctrl-0 = <&wcss_wlan_default>; status = "disabled"; @@ -2185,5 +2670,3 @@ <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; }; - -#include "msm8916-pins.dtsi" diff --git a/arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi index 33e02f42f5e4..adb96cd8d643 100644 --- a/arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi @@ -1,4 +1,12 @@ // SPDX-License-Identifier: GPL-2.0-only +/* + * msm8939-pm8916.dtsi describes common properties (e.g. regulator connections) + * that apply to most devices that make use of the MSM8939 SoC and PM8916 PMIC. + * Many regulators have a fixed purpose in the original reference design and + * were rarely re-used for different purposes. Devices that deviate from the + * typical reference design should not make use of this include and instead add + * the necessary properties in the board-specific device tree. + */ #include "msm8939.dtsi" #include "pm8916.dtsi" @@ -25,33 +33,104 @@ pll-supply = <&pm8916_l7>; }; +&pm8916_codec { + vdd-cdc-io-supply = <&pm8916_l5>; + vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>; + vdd-micbias-supply = <&pm8916_l13>; +}; + &rpm_requests { - smd_rpm_regulators: regulators { + pm8916_rpm_regulators: regulators { compatible = "qcom,rpm-pm8916-regulators"; + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; /* pm8916_s1 is managed by rpmpd (MSM8939_VDDMDCX) */ /* pm8916_s2 is managed by rpmpd (MSM8939_VDDCX) */ - pm8916_s3: s3 {}; - pm8916_s4: s4 {}; + pm8916_s3: s3 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; /* Needed for L2 */ + }; + pm8916_s4: s4 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <2150000>; + regulator-always-on; /* Needed for L5/L7 */ + }; + + /* + * Some of the regulators are unused or managed by another + * processor (e.g. the modem). We should still define nodes for + * them to ensure the vote from the application processor can be + * dropped in case the regulators are already on during boot. + * + * The labels for these nodes are omitted on purpose because + * boards should configure a proper voltage before using them. + */ + l1 {}; + + pm8916_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; /* Needed for LPDDR RAM */ + }; - pm8916_l1: l1 {}; - pm8916_l2: l2 {}; /* pm8916_l3 is managed by rpmpd (MSM8939_VDDMX) */ - pm8916_l4: l4 {}; - pm8916_l5: l5 {}; - pm8916_l6: l6 {}; - pm8916_l7: l7 {}; - pm8916_l8: l8 {}; - pm8916_l9: l9 {}; - pm8916_l10: l10 {}; - pm8916_l11: l11 {}; - pm8916_l12: l12 {}; - pm8916_l13: l13 {}; - pm8916_l14: l14 {}; - pm8916_l15: l15 {}; - pm8916_l16: l16 {}; - pm8916_l17: l17 {}; - pm8916_l18: l18 {}; + + l4 {}; + + pm8916_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; /* Needed for most digital I/O */ + }; + + pm8916_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8916_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; /* Needed for CPU PLL */ + }; + + pm8916_l8: l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + pm8916_l9: l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 {}; + + pm8916_l11: l11 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + pm8916_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8916_l13: l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 {}; + l15 {}; + l16 {}; + l17 {}; + l18 {}; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts b/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts index 85a8d8fe212f..8613cf93dac5 100644 --- a/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts +++ b/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts @@ -43,6 +43,13 @@ }; &tlmm { + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + usb_id_default: usb-id-default-state { pins = "gpio110"; function = "gpio"; @@ -51,115 +58,13 @@ }; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - pm8916_s3: s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - pm8916_s4: s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - pm8916_l2: l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - pm8916_l4: l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - pm8916_l5: l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pm8916_l6: l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - pm8916_l7: l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pm8916_l8: l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - pm8916_l9: l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - pm8916_l10: l10 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - pm8916_l11: l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-system-load = <200000>; - regulator-allow-set-load; - }; - - pm8916_l12: l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - pm8916_l13: l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - pm8916_l14: l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - pm8916_l15: l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - pm8916_l16: l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - pm8916_l17: l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - pm8916_l18: l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - &sdhc_1 { - pinctrl-0 = <&sdc1_default_state>; - pinctrl-1 = <&sdc1_sleep_state>; - pinctrl-names = "default", "sleep"; status = "okay"; }; &sdhc_2 { - pinctrl-0 = <&sdc2_default_state>; - pinctrl-1 = <&sdc2_sleep_state>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; pinctrl-names = "default", "sleep"; cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>; status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi index 0d9f8b951b66..895cafc11480 100644 --- a/arch/arm64/boot/dts/qcom/msm8939.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi @@ -969,23 +969,7 @@ bias-disable; }; - cdc_pdm_lines_default: pdm-lines-default-state { - pins = "gpio63", "gpio64", "gpio65", "gpio66", - "gpio67", "gpio68"; - function = "cdc_pdm0"; - drive-strength = <8>; - bias-disable; - }; - - cdc_pdm_lines_sleep: pdm-lines-suspend-state { - pins = "gpio63", "gpio64", "gpio65", "gpio66", - "gpio67", "gpio68"; - function = "cdc_pdm0"; - drive-strength = <2>; - bias-pull-down; - }; - - cdc_dmic_lines_act: cdc-dmic-lines-on-state { + cdc_dmic_default: cdc-dmic-default-state { clk-pins { pins = "gpio0"; function = "dmic0_clk"; @@ -999,7 +983,7 @@ }; }; - cdc_dmic_lines_sus: cdc-dmic-lines-off-state { + cdc_dmic_sleep: cdc-dmic-sleep-state { clk-pins { pins = "gpio0"; function = "dmic0_clk"; @@ -1015,72 +999,79 @@ }; }; - ext-mclk-tlmm-lines-state { - ext_mclk_tlmm_lines_act: mclk-lines-on-pins { - pins = "gpio116"; - function = "pri_mi2s"; - drive-strength = <8>; - bias-disable; - }; + cdc_pdm_default: cdc-pdm-default-state { + pins = "gpio63", "gpio64", "gpio65", "gpio66", + "gpio67", "gpio68"; + function = "cdc_pdm0"; + drive-strength = <8>; + bias-disable; + }; - ext_mclk_tlmm_lines_sus: mclk-lines-off-pins { - pins = "gpio116"; - function = "pri_mi2s"; - drive-strength = <2>; - bias-disable; - }; + cdc_pdm_sleep: cdc-pdm-sleep-state { + pins = "gpio63", "gpio64", "gpio65", "gpio66", + "gpio67", "gpio68"; + function = "cdc_pdm0"; + drive-strength = <2>; + bias-pull-down; }; - ext-pri-tlmm-lines-state { - ext_pri_tlmm_lines_act: ext-pa-on-pins { - pins = "gpio113", "gpio114", "gpio115", "gpio116"; - function = "pri_mi2s"; - drive-strength = <8>; - bias-disable; - }; + pri_mi2s_default: mi2s-pri-default-state { + pins = "gpio113", "gpio114", "gpio115", "gpio116"; + function = "pri_mi2s"; + drive-strength = <8>; + bias-disable; + }; - ext_pri_tlmm_lines_sus: ext-pa-off-pins { - pins = "gpio113", "gpio114", "gpio115", "gpio116"; - function = "pri_mi2s"; - drive-strength = <2>; - bias-disable; - }; + pri_mi2s_sleep: mi2s-pri-sleep-state { + pins = "gpio113", "gpio114", "gpio115", "gpio116"; + function = "pri_mi2s"; + drive-strength = <2>; + bias-disable; }; - ext-pri-ws-line-state { - ext_pri_ws_act: ext-pa-on-pins { - pins = "gpio110"; - function = "pri_mi2s_ws"; - drive-strength = <8>; - bias-disable; - }; + pri_mi2s_mclk_default: mi2s-pri-mclk-default-state { + pins = "gpio116"; + function = "pri_mi2s"; + drive-strength = <8>; + bias-disable; + }; - ext_pri_ws_sus: ext-pa-off-pins { - pins = "gpio110"; - function = "pri_mi2s_ws"; - drive-strength = <2>; - bias-disable; - }; + pri_mi2s_mclk_sleep: mi2s-pri-mclk-sleep-state { + pins = "gpio116"; + function = "pri_mi2s"; + drive-strength = <2>; + bias-disable; }; - /* secondary Mi2S */ - ext-sec-tlmm-lines-state { - ext_sec_tlmm_lines_act: tlmm-lines-on-pins { - pins = "gpio112", "gpio117", "gpio118", "gpio119"; - function = "sec_mi2s"; - drive-strength = <8>; - bias-disable; - }; + pri_mi2s_ws_default: mi2s-pri-ws-default-state { + pins = "gpio110"; + function = "pri_mi2s_ws"; + drive-strength = <8>; + bias-disable; + }; - ext_sec_tlmm_lines_sus: tlmm-lines-off-pins { - pins = "gpio112", "gpio117", "gpio118", "gpio119"; - function = "sec_mi2s"; - drive-strength = <2>; - bias-disable; - }; + pri_mi2s_ws_sleep: mi2s-pri-ws-sleep-state { + pins = "gpio110"; + function = "pri_mi2s_ws"; + drive-strength = <2>; + bias-disable; }; - sdc1_default_state: sdc1-default-state { + sec_mi2s_default: mi2s-sec-default-state { + pins = "gpio112", "gpio117", "gpio118", "gpio119"; + function = "sec_mi2s"; + drive-strength = <8>; + bias-disable; + }; + + sec_mi2s_sleep: mi2s-sec-sleep-state { + pins = "gpio112", "gpio117", "gpio118", "gpio119"; + function = "sec_mi2s"; + drive-strength = <2>; + bias-disable; + }; + + sdc1_default: sdc1-default-state { clk-pins { pins = "sdc1_clk"; bias-disable; @@ -1100,7 +1091,7 @@ }; }; - sdc1_sleep_state: sdc1-sleep-state { + sdc1_sleep: sdc1-sleep-state { clk-pins { pins = "sdc1_clk"; bias-disable; @@ -1120,7 +1111,7 @@ }; }; - sdc2_default_state: sdc2-default-state { + sdc2_default: sdc2-default-state { clk-pins { pins = "sdc2_clk"; bias-disable; @@ -1138,16 +1129,9 @@ bias-pull-up; drive-strength = <10>; }; - - cd-pins { - pins = "gpio38"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; }; - sdc2_sleep_state: sdc2-sleep-state { + sdc2_sleep: sdc2-sleep-state { clk-pins { pins = "sdc2_clk"; bias-disable; @@ -1165,16 +1149,9 @@ bias-pull-up; drive-strength = <2>; }; - - cd-pins { - pins = "gpio38"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; }; - wcnss_pin_a: wcnss-active-state { + wcss_wlan_default: wcss-wlan-default-state { pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44"; function = "wcss_wlan"; drive-strength = <6>; @@ -1631,6 +1608,7 @@ <&gcc GCC_CODEC_DIGCODEC_CLK>; clock-names = "ahbix-clk", "mclk"; #sound-dai-cells = <1>; + status = "disabled"; }; sdhc_1: mmc@7824900 { @@ -1646,6 +1624,9 @@ <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "iface", "core", "xo"; resets = <&gcc GCC_SDCC1_BCR>; + pinctrl-0 = <&sdc1_default>; + pinctrl-1 = <&sdc1_sleep>; + pinctrl-names = "default", "sleep"; mmc-ddr-1_8v; bus-width = <8>; non-removable; @@ -1665,6 +1646,9 @@ <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "iface", "core", "xo"; resets = <&gcc GCC_SDCC2_BCR>; + pinctrl-0 = <&sdc2_default>; + pinctrl-1 = <&sdc2_sleep>; + pinctrl-names = "default", "sleep"; bus-width = <4>; status = "disabled"; }; @@ -1980,7 +1964,7 @@ qcom,smem-state-names = "stop"; pinctrl-names = "default"; - pinctrl-0 = <&wcnss_pin_a>; + pinctrl-0 = <&wcss_wlan_default>; status = "disabled"; diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi index f42a1e376340..ddde5f2baeb8 100644 --- a/arch/arm64/boot/dts/qcom/msm8953.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi @@ -764,10 +764,10 @@ #power-domain-cells = <1>; clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>, - <&dsi0_phy 1>, - <&dsi0_phy 0>, - <&dsi1_phy 1>, - <&dsi1_phy 0>; + <&mdss_dsi0_phy 1>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi1_phy 1>, + <&mdss_dsi1_phy 0>; clock-names = "xo", "sleep", "dsi0pll", @@ -849,20 +849,20 @@ port@0 { reg = <0>; mdp5_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; + remote-endpoint = <&mdss_dsi0_in>; }; }; port@1 { reg = <1>; mdp5_intf2_out: endpoint { - remote-endpoint = <&dsi1_in>; + remote-endpoint = <&mdss_dsi1_in>; }; }; }; }; - dsi0: dsi@1a94000 { + mdss_dsi0: dsi@1a94000 { compatible = "qcom,msm8953-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0x01a94000 0x400>; reg-names = "dsi_ctrl"; @@ -872,8 +872,8 @@ assigned-clocks = <&gcc BYTE0_CLK_SRC>, <&gcc PCLK0_CLK_SRC>; - assigned-clock-parents = <&dsi0_phy 0>, - <&dsi0_phy 1>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; clocks = <&gcc GCC_MDSS_MDP_CLK>, <&gcc GCC_MDSS_AHB_CLK>, @@ -888,7 +888,7 @@ "pixel", "core"; - phys = <&dsi0_phy>; + phys = <&mdss_dsi0_phy>; #address-cells = <1>; #size-cells = <0>; @@ -901,20 +901,20 @@ port@0 { reg = <0>; - dsi0_in: endpoint { + mdss_dsi0_in: endpoint { remote-endpoint = <&mdp5_intf1_out>; }; }; port@1 { reg = <1>; - dsi0_out: endpoint { + mdss_dsi0_out: endpoint { }; }; }; }; - dsi0_phy: phy@1a94400 { + mdss_dsi0_phy: phy@1a94400 { compatible = "qcom,dsi-phy-14nm-8953"; reg = <0x01a94400 0x100>, <0x01a94500 0x300>, @@ -932,7 +932,7 @@ status = "disabled"; }; - dsi1: dsi@1a96000 { + mdss_dsi1: dsi@1a96000 { compatible = "qcom,msm8953-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0x01a96000 0x400>; reg-names = "dsi_ctrl"; @@ -942,8 +942,8 @@ assigned-clocks = <&gcc BYTE1_CLK_SRC>, <&gcc PCLK1_CLK_SRC>; - assigned-clock-parents = <&dsi1_phy 0>, - <&dsi1_phy 1>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>; clocks = <&gcc GCC_MDSS_MDP_CLK>, <&gcc GCC_MDSS_AHB_CLK>, @@ -958,7 +958,7 @@ "pixel", "core"; - phys = <&dsi1_phy>; + phys = <&mdss_dsi1_phy>; status = "disabled"; @@ -968,20 +968,20 @@ port@0 { reg = <0>; - dsi1_in: endpoint { + mdss_dsi1_in: endpoint { remote-endpoint = <&mdp5_intf2_out>; }; }; port@1 { reg = <1>; - dsi1_out: endpoint { + mdss_dsi1_out: endpoint { }; }; }; }; - dsi1_phy: phy@1a96400 { + mdss_dsi1_phy: phy@1a96400 { compatible = "qcom,dsi-phy-14nm-8953"; reg = <0x01a96400 0x100>, <0x01a96500 0x300>, diff --git a/arch/arm64/boot/dts/qcom/msm8996-mtp.dts b/arch/arm64/boot/dts/qcom/msm8996-mtp.dts index 596ad4c896f5..495d45a16e63 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-mtp.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-mtp.dts @@ -24,10 +24,10 @@ status = "okay"; }; -&hdmi { +&mdss_hdmi { status = "okay"; }; -&hdmi_phy { +&mdss_hdmi_phy { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi index 2adadc1e5b7c..ec5457508fe6 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi @@ -164,21 +164,6 @@ vdda-supply = <&vreg_l2a_1p25>; }; -&dsi0 { - vdda-supply = <&vreg_l2a_1p25>; - vcca-supply = <&vreg_l22a_3p0>; - status = "okay"; -}; - -&dsi0_out { - data-lanes = <0 1 2 3>; -}; - -&dsi0_phy { - vcca-supply = <&vreg_l28a_0p925>; - status = "okay"; -}; - &hsusb_phy1 { vdd-supply = <&vreg_l28a_0p925>; vdda-pll-supply = <&vreg_l12a_1p8>; @@ -201,6 +186,21 @@ status = "okay"; }; +&mdss_dsi0 { + vdda-supply = <&vreg_l2a_1p25>; + vcca-supply = <&vreg_l22a_3p0>; + status = "okay"; +}; + +&mdss_dsi0_out { + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vcca-supply = <&vreg_l28a_0p925>; + status = "okay"; +}; + &mmcc { vdd-gfx-supply = <&vdd_gfx>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi index 1ce5df0a3405..47f55c7311e9 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi @@ -235,7 +235,15 @@ }; }; -&dsi0 { +&gpu { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { status = "okay"; vdd-supply = <&vreg_l2a_1p25>; @@ -246,26 +254,18 @@ pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>; }; -&dsi0_out { +&mdss_dsi0_out { status = "okay"; data-lanes = <0 1 2 3>; }; -&dsi0_phy { +&mdss_dsi0_phy { status = "okay"; vcca-supply = <&vreg_l28a_0p925>; }; -&gpu { - status = "okay"; -}; - -&mdss { - status = "okay"; -}; - &mmcc { vdd-gfx-supply = <&vdd_gfx>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts index 100123d51494..bdedcf9dff03 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts @@ -93,7 +93,13 @@ }; -&dsi0 { +&gpu { + zap-shader { + firmware-name = "qcom/msm8996/gemini/a530_zap.mbn"; + }; +}; + +&mdss_dsi0 { status = "okay"; vdd-supply = <&vreg_l2a_1p25>; @@ -112,22 +118,16 @@ port { panel_in: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; }; }; -&dsi0_out { +&mdss_dsi0_out { remote-endpoint = <&panel_in>; }; -&gpu { - zap-shader { - firmware-name = "qcom/msm8996/gemini/a530_zap.mbn"; - }; -}; - &pmi8994_wled { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index a3f49f21ec37..e8152fa29d62 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -889,11 +889,11 @@ clocks = <&xo_board>, <&gcc GPLL0>, <&gcc GCC_MMSS_NOC_CFG_AHB_CLK>, - <&dsi0_phy 1>, - <&dsi0_phy 0>, - <&dsi1_phy 1>, - <&dsi1_phy 0>, - <&hdmi_phy>; + <&mdss_dsi0_phy 1>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi1_phy 1>, + <&mdss_dsi1_phy 0>, + <&mdss_hdmi_phy>; clock-names = "xo", "gpll0", "gcc_mmss_noc_cfg_ahb_clk", @@ -978,27 +978,27 @@ port@0 { reg = <0>; mdp5_intf3_out: endpoint { - remote-endpoint = <&hdmi_in>; + remote-endpoint = <&mdss_hdmi_in>; }; }; port@1 { reg = <1>; mdp5_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; + remote-endpoint = <&mdss_dsi0_in>; }; }; port@2 { reg = <2>; mdp5_intf2_out: endpoint { - remote-endpoint = <&dsi1_in>; + remote-endpoint = <&mdss_dsi1_in>; }; }; }; }; - dsi0: dsi@994000 { + mdss_dsi0: dsi@994000 { compatible = "qcom,msm8996-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0x00994000 0x400>; @@ -1022,9 +1022,9 @@ "pixel", "core"; assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>; - assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; - phys = <&dsi0_phy>; + phys = <&mdss_dsi0_phy>; status = "disabled"; #address-cells = <1>; @@ -1036,20 +1036,20 @@ port@0 { reg = <0>; - dsi0_in: endpoint { + mdss_dsi0_in: endpoint { remote-endpoint = <&mdp5_intf1_out>; }; }; port@1 { reg = <1>; - dsi0_out: endpoint { + mdss_dsi0_out: endpoint { }; }; }; }; - dsi0_phy: phy@994400 { + mdss_dsi0_phy: phy@994400 { compatible = "qcom,dsi-phy-14nm"; reg = <0x00994400 0x100>, <0x00994500 0x300>, @@ -1066,7 +1066,7 @@ status = "disabled"; }; - dsi1: dsi@996000 { + mdss_dsi1: dsi@996000 { compatible = "qcom,msm8996-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0x00996000 0x400>; @@ -1090,9 +1090,9 @@ "pixel", "core"; assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>; - assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>; - phys = <&dsi1_phy>; + phys = <&mdss_dsi1_phy>; status = "disabled"; #address-cells = <1>; @@ -1104,20 +1104,20 @@ port@0 { reg = <0>; - dsi1_in: endpoint { + mdss_dsi1_in: endpoint { remote-endpoint = <&mdp5_intf2_out>; }; }; port@1 { reg = <1>; - dsi1_out: endpoint { + mdss_dsi1_out: endpoint { }; }; }; }; - dsi1_phy: phy@996400 { + mdss_dsi1_phy: phy@996400 { compatible = "qcom,dsi-phy-14nm"; reg = <0x00996400 0x100>, <0x00996500 0x300>, @@ -1134,8 +1134,8 @@ status = "disabled"; }; - hdmi: hdmi-tx@9a0000 { - compatible = "qcom,hdmi-tx-8996"; + mdss_hdmi: mdss_hdmi-tx@9a0000 { + compatible = "qcom,mdss_hdmi-tx-8996"; reg = <0x009a0000 0x50c>, <0x00070000 0x6158>, <0x009e0000 0xfff>; @@ -1158,7 +1158,7 @@ "alt_iface", "extp"; - phys = <&hdmi_phy>; + phys = <&mdss_hdmi_phy>; #sound-dai-cells = <1>; status = "disabled"; @@ -1169,16 +1169,16 @@ port@0 { reg = <0>; - hdmi_in: endpoint { + mdss_hdmi_in: endpoint { remote-endpoint = <&mdp5_intf3_out>; }; }; }; }; - hdmi_phy: phy@9a0600 { + mdss_hdmi_phy: phy@9a0600 { #phy-cells = <0>; - compatible = "qcom,hdmi-phy-8996"; + compatible = "qcom,mdss_hdmi-phy-8996"; reg = <0x009a0600 0x1c4>, <0x009a0a00 0x124>, <0x009a0c00 0x124>, diff --git a/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts index d18d0b0eda95..7957c8823f0d 100644 --- a/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts +++ b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts @@ -39,7 +39,13 @@ }; }; -&dsi0 { +&gpu { + zap-shader { + firmware-name = "qcom/msm8996/natrium/a530_zap.mbn"; + }; +}; + +&mdss_dsi0 { status = "okay"; vdda-supply = <&vreg_l2a_1p25>; @@ -57,22 +63,16 @@ port { panel_in: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; }; }; -&dsi0_out { +&mdss_dsi0_out { remote-endpoint = <&panel_in>; }; -&gpu { - zap-shader { - firmware-name = "qcom/msm8996/natrium/a530_zap.mbn"; - }; -}; - &mss_pil { firmware-name = "qcom/msm8996/natrium/mba.mbn", "qcom/msm8996/natrium/modem.mbn"; diff --git a/arch/arm64/boot/dts/qcom/msm8996pro.dtsi b/arch/arm64/boot/dts/qcom/msm8996pro.dtsi index a679a9c0cf99..b74cff06f300 100644 --- a/arch/arm64/boot/dts/qcom/msm8996pro.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996pro.dtsi @@ -24,101 +24,121 @@ opp-hz = /bits/ 64 <307200000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <192000>; }; opp-384000000 { opp-hz = /bits/ 64 <384000000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <192000>; }; opp-460800000 { opp-hz = /bits/ 64 <460800000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <192000>; }; opp-537600000 { opp-hz = /bits/ 64 <537600000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <192000>; }; opp-614400000 { opp-hz = /bits/ 64 <614400000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <192000>; }; opp-691200000 { opp-hz = /bits/ 64 <691200000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <307200>; }; opp-768000000 { opp-hz = /bits/ 64 <768000000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <307200>; }; opp-844800000 { opp-hz = /bits/ 64 <844800000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <384000>; }; opp-902400000 { opp-hz = /bits/ 64 <902400000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <441600>; }; opp-979200000 { opp-hz = /bits/ 64 <979200000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <537600>; }; opp-1056000000 { opp-hz = /bits/ 64 <1056000000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <614400>; }; opp-1132800000 { opp-hz = /bits/ 64 <1132800000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <691200>; }; opp-1209600000 { opp-hz = /bits/ 64 <1209600000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <768000>; }; opp-1286400000 { opp-hz = /bits/ 64 <1286400000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <844800>; }; opp-1363200000 { opp-hz = /bits/ 64 <1363200000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <902400>; }; opp-1440000000 { opp-hz = /bits/ 64 <1440000000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <979200>; }; opp-1516800000 { opp-hz = /bits/ 64 <1516800000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <1132800>; }; opp-1593600000 { opp-hz = /bits/ 64 <1593600000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <1190400>; }; opp-1996800000 { opp-hz = /bits/ 64 <1996800000>; opp-supported-hw = <0x20>; clock-latency-ns = <200000>; + opp-peak-kBps = <1516800>; }; opp-2188800000 { opp-hz = /bits/ 64 <2188800000>; opp-supported-hw = <0x10>; clock-latency-ns = <200000>; + opp-peak-kBps = <1593600>; }; }; @@ -131,136 +151,163 @@ opp-hz = /bits/ 64 <307200000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <192000>; }; opp-384000000 { opp-hz = /bits/ 64 <384000000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <192000>; }; opp-460800000 { opp-hz = /bits/ 64 <460800000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <192000>; }; opp-537600000 { opp-hz = /bits/ 64 <537600000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <192000>; }; opp-614400000 { opp-hz = /bits/ 64 <614400000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <192000>; }; opp-691200000 { opp-hz = /bits/ 64 <691200000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <307200>; }; opp-748800000 { opp-hz = /bits/ 64 <748800000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <307200>; }; opp-825600000 { opp-hz = /bits/ 64 <825600000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <384000>; }; opp-902400000 { opp-hz = /bits/ 64 <902400000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <441600>; }; opp-979200000 { opp-hz = /bits/ 64 <979200000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <441600>; }; opp-1056000000 { opp-hz = /bits/ 64 <1056000000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <537600>; }; opp-1132800000 { opp-hz = /bits/ 64 <1132800000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <614400>; }; opp-1209600000 { opp-hz = /bits/ 64 <1209600000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <691200>; }; opp-1286400000 { opp-hz = /bits/ 64 <1286400000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <768000>; }; opp-1363200000 { opp-hz = /bits/ 64 <1363200000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <844800>; }; opp-1440000000 { opp-hz = /bits/ 64 <1440000000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <902400>; }; opp-1516800000 { opp-hz = /bits/ 64 <1516800000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <979200>; }; opp-1593600000 { opp-hz = /bits/ 64 <1593600000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <1056000>; }; opp-1670400000 { opp-hz = /bits/ 64 <1670400000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <1132800>; }; opp-1747200000 { opp-hz = /bits/ 64 <1747200000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <1190400>; }; opp-1824000000 { opp-hz = /bits/ 64 <1824000000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <1286400>; }; opp-1900800000 { opp-hz = /bits/ 64 <1900800000>; opp-supported-hw = <0x70>; clock-latency-ns = <200000>; + opp-peak-kBps = <1363200>; }; opp-1977600000 { opp-hz = /bits/ 64 <1977600000>; opp-supported-hw = <0x30>; clock-latency-ns = <200000>; + opp-peak-kBps = <1440000>; }; opp-2054400000 { opp-hz = /bits/ 64 <2054400000>; opp-supported-hw = <0x30>; clock-latency-ns = <200000>; + opp-peak-kBps = <1516800>; }; opp-2150400000 { opp-hz = /bits/ 64 <2150400000>; opp-supported-hw = <0x30>; clock-latency-ns = <200000>; + opp-peak-kBps = <1593600>; }; opp-2246400000 { opp-hz = /bits/ 64 <2246400000>; opp-supported-hw = <0x10>; clock-latency-ns = <200000>; + opp-peak-kBps = <1593600>; }; opp-2342400000 { opp-hz = /bits/ 64 <2342400000>; opp-supported-hw = <0x10>; clock-latency-ns = <200000>; + opp-peak-kBps = <1593600>; }; }; }; @@ -289,3 +336,7 @@ }; /* The rest is inherited from msm8996 */ }; + +&cbf { + compatible = "qcom,msm8996pro-cbf"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi index 062d56c42385..68e634f8212c 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi @@ -279,10 +279,6 @@ }; }; -&pmi8998_rradc { - status = "okay"; -}; - &qusb2phy { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/pm8550.dtsi b/arch/arm64/boot/dts/qcom/pm8550.dtsi index 33f357a80636..db3d5c17a77d 100644 --- a/arch/arm64/boot/dts/qcom/pm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8550.dtsi @@ -61,5 +61,15 @@ reg = <0xee00>; status = "disabled"; }; + + pm8550_pwm: pwm { + compatible = "qcom,pm8550-pwm", "qcom,pm8350c-pwm"; + + #address-cells = <1>; + #size-cells = <0>; + #pwm-cells = <2>; + + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi index 08e00819b39d..cd3f0790fd42 100644 --- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi @@ -9,6 +9,26 @@ #address-cells = <1>; #size-cells = <0>; + pmi8998_charger: charger@1000 { + compatible = "qcom,pmi8998-charger"; + reg = <0x1000>; + + interrupts = <0x2 0x13 0x4 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x12 0x2 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x16 0x1 IRQ_TYPE_EDGE_RISING>, + <0x2 0x13 0x6 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "usb-plugin", + "bat-ov", + "wdog-bark", + "usbin-icl-change"; + + io-channels = <&pmi8998_rradc 3>, + <&pmi8998_rradc 4>; + io-channel-names = "usbin_i", "usbin_v"; + + status = "disabled"; + }; + pmi8998_gpios: gpio@c000 { compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio"; reg = <0xc000>; @@ -23,8 +43,6 @@ compatible = "qcom,pmi8998-rradc"; reg = <0x4500>; #io-channel-cells = <1>; - - status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/qcom/pmk8550.dtsi b/arch/arm64/boot/dts/qcom/pmk8550.dtsi index 8c897d4fee29..c7ac9b2eaacf 100644 --- a/arch/arm64/boot/dts/qcom/pmk8550.dtsi +++ b/arch/arm64/boot/dts/qcom/pmk8550.dtsi @@ -49,7 +49,6 @@ reg = <0x6100>, <0x6200>; reg-names = "rtc", "alarm"; interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; }; pmk8550_sdam_2: nvram@7100 { diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi index ae5abc76bcc7..82de2f8a6180 100644 --- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi +++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi @@ -48,6 +48,8 @@ enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; L2_0: l2-cache { compatible = "cache"; cache-level = <2>; @@ -64,6 +66,8 @@ enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; }; CPU2: cpu@2 { @@ -76,6 +80,8 @@ enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; }; CPU3: cpu@3 { @@ -88,6 +94,8 @@ enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; }; cpu-map { @@ -109,6 +117,30 @@ }; }; }; + + domain-idle-states { + CLUSTER_SLEEP: cluster-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000043>; + entry-latency-us = <800>; + exit-latency-us = <2118>; + min-residency-us = <7376>; + }; + }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP: cpu-sleep-0 { + compatible = "arm,idle-state"; + idle-state-name = "power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <290>; + exit-latency-us = <376>; + min-residency-us = <1182>; + local-timer-stop; + }; + }; }; firmware { @@ -134,6 +166,35 @@ psci { compatible = "arm,psci-1.0"; method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_SLEEP>; + }; + + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_SLEEP>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_SLEEP>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_SLEEP>; + }; + + CLUSTER_PD: power-domain-cpu-cluster { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP>; + }; }; reserved_memory: reserved-memory { diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts index 9e9fd4b8023e..1d22f87fd238 100644 --- a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts +++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts @@ -448,6 +448,29 @@ status = "okay"; }; +&sdhc { + pinctrl-0 = <&sdc_on_state>; + pinctrl-1 = <&sdc_off_state>; + pinctrl-names = "default", "sleep"; + + cap-mmc-hw-reset; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + + non-removable; + no-sd; + no-sdio; + + supports-cqe; + + vmmc-supply = <&vreg_l10a_2p95>; + vqmmc-supply = <&vreg_l7a_1p8>; + + status = "okay"; +}; + &uart7 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi index bc16d12432c1..7153461d62d7 100644 --- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi @@ -842,6 +842,53 @@ #hwlock-cells = <1>; }; + sdhc: mmc@8804000 { + compatible = "qcom,qdu1000-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0 0x08804000 0x0 0x1000>, + <0x0 0x08805000 0x0 0x1000>; + reg-names = "hc", "cqhci"; + + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC5_AHB_CLK>, + <&gcc GCC_SDCC5_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", + "core", + "xo"; + + resets = <&gcc GCC_SDCC5_BCR>; + + interconnects = <&system_noc MASTER_SDCC_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_SDCC_2 0>; + interconnect-names = "sdhc-ddr", "cpu-sdhc"; + power-domains = <&rpmhpd QDU1000_CX>; + operating-points-v2 = <&sdhc1_opp_table>; + + iommus = <&apps_smmu 0x80 0x0>; + dma-coherent; + + bus-width = <8>; + + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + + status = "disabled"; + + sdhc1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <6528000 1652800>; + opp-avg-kBps = <400000 0>; + }; + }; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,qdu1000-pdc", "qcom,pdc"; reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>; @@ -1100,6 +1147,69 @@ pins = "gpio31"; function = "gpio"; }; + + sdc_on_state: sdc-on-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc_off_state: sdc-off-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <2>; + bias-pull-up; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + }; + + sram@14680000 { + compatible = "qcom,qdu1000-imem", "syscon", "simple-mfd"; + reg = <0 0x14680000 0 0x1000>; + ranges = <0 0 0x14680000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; }; apps_smmu: iommu@15000000 { @@ -1242,6 +1352,7 @@ qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>, <WAKE_TCS 3>, <CONTROL_TCS 0>; label = "apps_rsc"; + power-domains = <&CLUSTER_PD>; apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts index 39597277343c..e23a0406eacc 100644 --- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts +++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts @@ -7,6 +7,7 @@ #include <dt-bindings/leds/common.h> #include "sm4250.dtsi" +#include "pm6125.dtsi" / { model = "Qualcomm Technologies, Inc. QRB4210 RB2"; @@ -28,6 +29,23 @@ }; }; + gpio-keys { + compatible = "gpio-keys"; + label = "gpio-keys"; + + pinctrl-0 = <&kypd_vol_up_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + hdmi-connector { compatible = "hdmi-connector"; type = "a"; @@ -219,6 +237,25 @@ status = "okay"; }; +&pm6125_gpios { + kypd_vol_up_n: kypd-vol-up-n-state { + pins = "gpio5"; + function = "normal"; + power-source = <0>; + bias-pull-up; + input-enable; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + &qupv3_id_0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts index dd924331b0ee..9022ad726741 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts @@ -535,30 +535,6 @@ firmware-name = "qcom/sm8250/cdsp.mbn"; }; -&dsi0 { - status = "okay"; - vdda-supply = <&vreg_l9a_1p2>; - -#if 0 - qcom,dual-dsi-mode; - qcom,master-dsi; -#endif - - ports { - port@1 { - endpoint { - remote-endpoint = <<9611_a>; - data-lanes = <0 1 2 3>; - }; - }; - }; -}; - -&dsi0_phy { - status = "okay"; - vdds-supply = <&vreg_l5a_0p88>; -}; - &gmu { status = "okay"; }; @@ -604,7 +580,7 @@ reg = <0>; lt9611_a: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; @@ -613,7 +589,7 @@ reg = <1>; lt9611_b: endpoint { - remote-endpoint = <&dsi1_out>; + remote-endpoint = <&mdss_dsi1_out>; }; }; #endif @@ -639,8 +615,28 @@ status = "okay"; }; -&mdss_mdp { +&mdss_dsi0 { + status = "okay"; + vdda-supply = <&vreg_l9a_1p2>; + +#if 0 + qcom,dual-dsi-mode; + qcom,master-dsi; +#endif + + ports { + port@1 { + endpoint { + remote-endpoint = <<9611_a>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&mdss_dsi0_phy { status = "okay"; + vdds-supply = <&vreg_l5a_0p88>; }; &pm8150_adc { diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts index 21e9eaf914dd..5a26974dcf8f 100644 --- a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts +++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts @@ -171,6 +171,7 @@ /* Marvell 88EA1512 */ rgmii_phy: phy@8 { + compatible = "ethernet-phy-id0141.0dd4"; reg = <0x8>; interrupts-extended = <&tlmm 127 IRQ_TYPE_EDGE_FALLING>; diff --git a/arch/arm64/boot/dts/qcom/sa8540p.dtsi b/arch/arm64/boot/dts/qcom/sa8540p.dtsi index 4a990fda8fc3..bacbdec56281 100644 --- a/arch/arm64/boot/dts/qcom/sa8540p.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8540p.dtsi @@ -167,6 +167,14 @@ }; }; +&gpucc { + status = "disabled"; +}; + +&gpu_smmu { + status = "disabled"; +}; + &pcie2a { compatible = "qcom,pcie-sa8540p"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts index 2a80f4090085..b637b4270f88 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts @@ -143,21 +143,6 @@ }; }; -&dsi0 { - vdda-supply = <&vreg_l3c_1p2>; - status = "okay"; -}; - -&dsi0_out { - remote-endpoint = <&sn65dsi86_in>; - data-lanes = <0 1 2 3>; -}; - -&dsi_phy { - vdds-supply = <&vreg_l4a_0p8>; - status = "okay"; -}; - &i2c2 { clock-frequency = <400000>; status = "okay"; @@ -269,7 +254,7 @@ reg = <0>; sn65dsi86_in: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; @@ -313,6 +298,21 @@ status = "okay"; }; +&mdss_dsi0 { + vdda-supply = <&vreg_l3c_1p2>; + status = "okay"; +}; + +&mdss_dsi0_out { + remote-endpoint = <&sn65dsi86_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l4a_0p8>; + status = "okay"; +}; + &pm6150_adc { thermistor@4e { reg = <ADC5_AMUX_THM2_100K_PU>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts index bd9ed03159cf..546db0d90630 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts @@ -295,7 +295,11 @@ }; }; -&dsi0 { +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { status = "okay"; vdda-supply = <&vreg_l3c_1p2>; @@ -314,7 +318,7 @@ port { panel0_in: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; }; @@ -329,15 +333,11 @@ }; }; -&dsi_phy { +&mdss_dsi0_phy { status = "okay"; vdds-supply = <&vreg_l4a_0p8>; }; -&mdss { - status = "okay"; -}; - &qfprom { vcc-supply = <&vreg_l11a_1p8>; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi index 5aa7949b5328..bede23369fed 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi @@ -46,10 +46,6 @@ /* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ -&dsi0_out { - remote-endpoint = <&ps8640_in>; -}; - edp_brij_i2c: &i2c2 { status = "okay"; clock-frequency = <400000>; @@ -74,7 +70,7 @@ edp_brij_i2c: &i2c2 { port@0 { reg = <0>; ps8640_in: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; @@ -102,6 +98,10 @@ edp_brij_i2c: &i2c2 { }; }; +&mdss_dsi0_out { + remote-endpoint = <&ps8640_in>; +}; + &tlmm { edp_brij_ps8640_rst: edp-brij-ps8640-rst-state { pins = "gpio11"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts index 5c81e44ed4a5..0a7f2286b541 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts @@ -15,7 +15,7 @@ compatible = "google,quackingstick-sku1537", "qcom,sc7180"; }; -&dsi_phy { +&mdss_dsi0_phy { qcom,phy-rescode-offset-top = /bits/ 8 <(-13) (-13) (-13) (-13) (-13)>; qcom,phy-rescode-offset-bot = /bits/ 8 <(-13) (-13) (-13) (-13) (-13)>; qcom,phy-drive-ldo-level = <375>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi index 8e7b42f843d4..62ab6427dd65 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi @@ -52,7 +52,31 @@ }; }; -&dsi0 { +&gpio_keys { + status = "okay"; +}; + +&i2c4 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + post-power-on-delay-ms = <20>; + hid-descr-addr = <0x0001>; + + vdd-supply = <&pp3300_ts>; + }; +}; + +&mdss_dsi0 { panel: panel@0 { /* Compatible will be filled in per-board */ reg = <0>; @@ -67,7 +91,7 @@ port { panel_in: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; }; @@ -82,30 +106,6 @@ }; }; -&gpio_keys { - status = "okay"; -}; - -&i2c4 { - status = "okay"; - clock-frequency = <400000>; - - ap_ts: touchscreen@10 { - compatible = "hid-over-i2c"; - reg = <0x10>; - pinctrl-names = "default"; - pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; - - interrupt-parent = <&tlmm>; - interrupts = <9 IRQ_TYPE_LEVEL_LOW>; - - post-power-on-delay-ms = <20>; - hid-descr-addr = <0x0001>; - - vdd-supply = <&pp3300_ts>; - }; -}; - &sdhc_2 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi index e52b8776755d..b0c3be4c3bb4 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi @@ -27,10 +27,6 @@ /* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ -&dsi0_out { - remote-endpoint = <&sn65dsi86_in>; -}; - edp_brij_i2c: &i2c2 { status = "okay"; clock-frequency = <400000>; @@ -65,7 +61,7 @@ edp_brij_i2c: &i2c2 { port@0 { reg = <0>; sn65dsi86_in: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; @@ -95,6 +91,10 @@ edp_brij_i2c: &i2c2 { }; }; +&mdss_dsi0_out { + remote-endpoint = <&sn65dsi86_in>; +}; + &tlmm { edp_brij_irq: edp-brij-irq-state { pins = "gpio11"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts index c5b0658bd632..6eeead70d3eb 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts @@ -17,7 +17,7 @@ compatible = "google,wormdingler-sku1024", "qcom,sc7180"; }; -&dsi_phy { +&mdss_dsi0_phy { qcom,phy-rescode-offset-top = /bits/ 8 <31 31 31 31 (-32)>; qcom,phy-rescode-offset-bot = /bits/ 8 <31 31 31 31 (-32)>; qcom,phy-drive-ldo-level = <450>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi index 262d6691abd9..2efa8a4bcda6 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi @@ -110,7 +110,28 @@ }; }; -&dsi0 { +&i2c4 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@1 { + compatible = "hid-over-i2c"; + reg = <0x01>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + + post-power-on-delay-ms = <70>; + hid-descr-addr = <0x0001>; + + vdd-supply = <&pp3300_ts>; + vddl-supply = <&pp1800_ts>; + }; +}; + +&mdss_dsi0 { panel: panel@0 { reg = <0>; @@ -126,7 +147,7 @@ port { panel_in: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; }; @@ -141,27 +162,6 @@ }; }; -&i2c4 { - status = "okay"; - clock-frequency = <400000>; - - ap_ts: touchscreen@1 { - compatible = "hid-over-i2c"; - reg = <0x01>; - pinctrl-names = "default"; - pinctrl-0 = <&ts_int_l>; - - interrupt-parent = <&tlmm>; - interrupts = <9 IRQ_TYPE_EDGE_FALLING>; - - post-power-on-delay-ms = <70>; - hid-descr-addr = <0x0001>; - - vdd-supply = <&pp3300_ts>; - vddl-supply = <&pp1800_ts>; - }; -}; - &pm6150_adc { skin-temp-thermistor@4d { reg = <ADC5_AMUX_THM1_100K_PU>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index 51d6c3502f3f..805fe1275e97 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -705,20 +705,6 @@ ap_h1_spi: &spi0 { status = "disabled"; }; -&dsi0 { - status = "okay"; - vdda-supply = <&vdda_mipi_dsi0_1p2>; -}; - -&dsi0_out { - data-lanes = <0 1 2 3>; -}; - -&dsi_phy { - status = "okay"; - vdds-supply = <&vdda_mipi_dsi0_pll>; -}; - ap_sar_sensor_i2c: &i2c5 { clock-frequency = <400000>; @@ -836,6 +822,20 @@ hp_i2c: &i2c9 { link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000>; }; +&mdss_dsi0 { + status = "okay"; + vdda-supply = <&vdda_mipi_dsi0_1p2>; +}; + +&mdss_dsi0_out { + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + status = "okay"; + vdds-supply = <&vdda_mipi_dsi0_pll>; +}; + &pm6150_adc { charger-thermistor@4f { reg = <ADC5_AMUX_THM3_100K_PU>; diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index af90052c5a8a..f1e949b3c1be 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -2996,7 +2996,7 @@ port@0 { reg = <0>; dpu_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; + remote-endpoint = <&mdss_dsi0_in>; }; }; @@ -3033,7 +3033,7 @@ }; }; - dsi0: dsi@ae94000 { + mdss_dsi0: dsi@ae94000 { compatible = "qcom,sc7180-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae94000 0 0x400>; @@ -3056,12 +3056,12 @@ "bus"; assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; - assigned-clock-parents = <&dsi_phy 0>, <&dsi_phy 1>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; operating-points-v2 = <&dsi_opp_table>; power-domains = <&rpmhpd SC7180_CX>; - phys = <&dsi_phy>; + phys = <&mdss_dsi0_phy>; #address-cells = <1>; #size-cells = <0>; @@ -3074,14 +3074,14 @@ port@0 { reg = <0>; - dsi0_in: endpoint { + mdss_dsi0_in: endpoint { remote-endpoint = <&dpu_intf1_out>; }; }; port@1 { reg = <1>; - dsi0_out: endpoint { + mdss_dsi0_out: endpoint { }; }; }; @@ -3106,13 +3106,13 @@ }; }; - dsi_phy: phy@ae94400 { + mdss_dsi0_phy: phy@ae94400 { compatible = "qcom,dsi-phy-10nm"; reg = <0 0x0ae94400 0 0x200>, <0 0x0ae94600 0 0x280>, <0 0x0ae94a00 0 0x1e0>; - reg-names = "dsi_phy", - "dsi_phy_lane", + reg-names = "dsi0_phy", + "dsi0_phy_lane", "dsi_pll"; #clock-cells = <1>; @@ -3203,8 +3203,8 @@ reg = <0 0x0af00000 0 0x200000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_DISP_GPLL0_CLK_SRC>, - <&dsi_phy 0>, - <&dsi_phy 1>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>, <&dp_phy 0>, <&dp_phy 1>; clock-names = "bi_tcxo", diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi index 5b1c175c47f1..9ea6636125ad 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi @@ -467,10 +467,6 @@ ap_i2c_tpm: &i2c14 { link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000>; }; -&mdss_mdp { - status = "okay"; -}; - /* NVMe drive, enabled on a per-board basis */ &pcie1 { pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 7c5dbac7ef77..4a7bf9704af1 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -3872,8 +3872,6 @@ interrupt-parent = <&mdss>; interrupts = <0>; - status = "disabled"; - ports { #address-cells = <1>; #size-cells = <0>; @@ -3881,7 +3879,7 @@ port@0 { reg = <0>; dpu_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; + remote-endpoint = <&mdss_dsi0_in>; }; }; @@ -3966,14 +3964,14 @@ port@0 { reg = <0>; - dsi0_in: endpoint { + mdss_dsi0_in: endpoint { remote-endpoint = <&dpu_intf1_out>; }; }; port@1 { reg = <1>; - dsi0_out: endpoint { + mdss_dsi0_out: endpoint { }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts index cca663bcb92d..fc038474cb71 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts +++ b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts @@ -291,10 +291,6 @@ }; }; -&dispcc { - status = "okay"; -}; - &gpu { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi index e8613a00fcab..d3ae18535636 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi @@ -2310,7 +2310,8 @@ }; adreno_smmu: iommu@2ca0000 { - compatible = "qcom,sc8180x-smmu-500", "arm,mmu-500"; + compatible = "qcom,sc8180x-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; reg = <0 0x02ca0000 0 0x10000>; #iommu-cells = <2>; #global-interrupts = <1>; @@ -2732,14 +2733,14 @@ port@1 { reg = <1>; dpu_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; + remote-endpoint = <&mdss_dsi0_in>; }; }; port@2 { reg = <2>; dpu_intf2_out: endpoint { - remote-endpoint = <&dsi1_in>; + remote-endpoint = <&mdss_dsi1_in>; }; }; @@ -2783,7 +2784,7 @@ }; }; - dsi0: dsi@ae94000 { + mdss_dsi0: dsi@ae94000 { compatible = "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae94000 0 0x400>; reg-names = "dsi_ctrl"; @@ -2807,7 +2808,7 @@ operating-points-v2 = <&dsi_opp_table>; power-domains = <&rpmhpd SC8180X_MMCX>; - phys = <&dsi0_phy>; + phys = <&mdss_dsi0_phy>; phy-names = "dsi"; status = "disabled"; @@ -2818,14 +2819,14 @@ port@0 { reg = <0>; - dsi0_in: endpoint { + mdss_dsi0_in: endpoint { remote-endpoint = <&dpu_intf1_out>; }; }; port@1 { reg = <1>; - dsi0_out: endpoint { + mdss_dsi0_out: endpoint { }; }; }; @@ -2850,7 +2851,7 @@ }; }; - dsi0_phy: dsi-phy@ae94400 { + mdss_dsi0_phy: dsi-phy@ae94400 { compatible = "qcom,dsi-phy-7nm"; reg = <0 0x0ae94400 0 0x200>, <0 0x0ae94600 0 0x280>, @@ -2869,7 +2870,7 @@ status = "disabled"; }; - dsi1: dsi@ae96000 { + mdss_dsi1: dsi@ae96000 { compatible = "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae96000 0 0x400>; reg-names = "dsi_ctrl"; @@ -2893,7 +2894,7 @@ operating-points-v2 = <&dsi_opp_table>; power-domains = <&rpmhpd SC8180X_MMCX>; - phys = <&dsi1_phy>; + phys = <&mdss_dsi1_phy>; phy-names = "dsi"; status = "disabled"; @@ -2904,20 +2905,20 @@ port@0 { reg = <0>; - dsi1_in: endpoint { + mdss_dsi1_in: endpoint { remote-endpoint = <&dpu_intf2_out>; }; }; port@1 { reg = <1>; - dsi1_out: endpoint { + mdss_dsi1_out: endpoint { }; }; }; }; - dsi1_phy: dsi-phy@ae96400 { + mdss_dsi1_phy: dsi-phy@ae96400 { compatible = "qcom,dsi-phy-7nm"; reg = <0 0x0ae96400 0 0x200>, <0 0x0ae96600 0 0x280>, @@ -2965,7 +2966,7 @@ #sound-dai-cells = <0>; operating-points-v2 = <&dp0_opp_table>; - power-domains = <&rpmhpd SC8180X_CX>; + power-domains = <&rpmhpd SC8180X_MMCX>; status = "disabled"; @@ -3039,7 +3040,7 @@ #sound-dai-cells = <0>; operating-points-v2 = <&dp0_opp_table>; - power-domains = <&rpmhpd SC8180X_CX>; + power-domains = <&rpmhpd SC8180X_MMCX>; status = "disabled"; @@ -3113,7 +3114,7 @@ #sound-dai-cells = <0>; operating-points-v2 = <&edp_opp_table>; - power-domains = <&rpmhpd SC8180X_CX>; + power-domains = <&rpmhpd SC8180X_MMCX>; status = "disabled"; @@ -3495,6 +3496,7 @@ <WAKE_TCS 1>, <CONTROL_TCS 0>; label = "apps_rsc"; + power-domains = <&CLUSTER_PD>; apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts index cd7e0097d8bc..b566e403d1db 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts @@ -210,6 +210,11 @@ }; reserved-memory { + gpu_mem: gpu-mem@8bf00000 { + reg = <0 0x8bf00000 0 0x2000>; + no-map; + }; + linux,cma { compatible = "shared-dma-pool"; size = <0x0 0x8000000>; @@ -390,6 +395,15 @@ status = "okay"; }; +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sc8280xp/qcdxkmsuc8280.mbn"; + }; +}; + &mdss0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index 5ae057ad6438..7cc3028440b6 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -264,6 +264,11 @@ }; reserved-memory { + gpu_mem: gpu-mem@8bf00000 { + reg = <0 0x8bf00000 0 0x2000>; + no-map; + }; + linux,cma { compatible = "shared-dma-pool"; size = <0x0 0x8000000>; @@ -518,6 +523,15 @@ status = "okay"; }; +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sc8280xp/LENOVO/21BX/qcdxkmsuc8280.mbn"; + }; +}; + &mdss0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index 4f64adadcdb5..c77278712b12 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -6,7 +6,9 @@ #include <dt-bindings/clock/qcom,dispcc-sc8280xp.h> #include <dt-bindings/clock/qcom,gcc-sc8280xp.h> +#include <dt-bindings/clock/qcom,gpucc-sc8280xp.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sc8280xp.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -2331,6 +2333,180 @@ reg = <0x0 0x01fc0000 0x0 0x30000>; }; + gpu: gpu@3d00000 { + compatible = "qcom,adreno-690.0", "qcom,adreno"; + + reg = <0 0x03d00000 0 0x40000>, + <0 0x03d9e000 0 0x1000>, + <0 0x03d61000 0 0x800>; + reg-names = "kgsl_3d0_reg_memory", + "cx_mem", + "cx_dbgc"; + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&gpu_smmu 0 0xc00>, <&gpu_smmu 1 0xc00>; + operating-points-v2 = <&gpu_opp_table>; + + qcom,gmu = <&gmu>; + interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "gfx-mem"; + #cooling-cells = <2>; + + status = "disabled"; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + opp-peak-kBps = <451000>; + }; + + opp-410000000 { + opp-hz = /bits/ 64 <410000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + opp-peak-kBps = <1555000>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + opp-peak-kBps = <1555000>; + }; + + opp-547000000 { + opp-hz = /bits/ 64 <547000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; + opp-peak-kBps = <1555000>; + }; + + opp-606000000 { + opp-hz = /bits/ 64 <606000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + opp-peak-kBps = <2736000>; + }; + + opp-640000000 { + opp-hz = /bits/ 64 <640000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + opp-peak-kBps = <2736000>; + }; + + opp-655000000 { + opp-hz = /bits/ 64 <655000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + opp-peak-kBps = <2736000>; + }; + + opp-690000000 { + opp-hz = /bits/ 64 <690000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + opp-peak-kBps = <2736000>; + }; + }; + }; + + gmu: gmu@3d6a000 { + compatible = "qcom,adreno-gmu-690.0", "qcom,adreno-gmu"; + reg = <0 0x03d6a000 0 0x34000>, + <0 0x03de0000 0 0x10000>, + <0 0x0b290000 0 0x10000>; + reg-names = "gmu", "rscc", "gmu_pdc"; + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hfi", "gmu"; + clocks = <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_HUB_CX_INT_CLK>, + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>; + clock-names = "gmu", + "cxo", + "axi", + "memnoc", + "ahb", + "hub", + "smmu_vote"; + power-domains = <&gpucc GPU_CC_CX_GDSC>, + <&gpucc GPU_CC_GX_GDSC>; + power-domain-names = "cx", + "gx"; + iommus = <&gpu_smmu 5 0xc00>; + operating-points-v2 = <&gmu_opp_table>; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + }; + }; + + gpucc: clock-controller@3d90000 { + compatible = "qcom,sc8280xp-gpucc"; + reg = <0 0x03d90000 0 0x9000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + clock-names = "bi_tcxo", + "gcc_gpu_gpll0_clk_src", + "gcc_gpu_gpll0_div_clk_src"; + + power-domains = <&rpmhpd SC8280XP_GFX>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + gpu_smmu: iommu@3da0000 { + compatible = "qcom,sc8280xp-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; + reg = <0 0x03da0000 0 0x20000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 688 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>, + <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, + <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_HUB_CX_INT_CLK>, + <&gpucc GPU_CC_HUB_AON_CLK>; + clock-names = "gcc_gpu_memnoc_gfx_clk", + "gcc_gpu_snoc_dvm_gfx_clk", + "gpu_cc_ahb_clk", + "gpu_cc_hlos1_vote_gpu_smmu_clk", + "gpu_cc_cx_gmu_clk", + "gpu_cc_hub_cx_int_clk", + "gpu_cc_hub_aon_clk"; + + power-domains = <&gpucc GPU_CC_CX_GDSC>; + dma-coherent; + }; + usb_0_hsphy: phy@88e5000 { compatible = "qcom,sc8280xp-usb-hs-phy", "qcom,usb-snps-hs-5nm-phy"; @@ -2551,6 +2727,8 @@ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rxmacro>; clock-names = "iface"; + resets = <&lpass_audiocc LPASS_AUDIO_SWR_RX_CGCR>; + reset-names = "swr_audio_cgcr"; label = "RX"; qcom,din-ports = <0>; @@ -2625,6 +2803,8 @@ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; clocks = <&wsamacro>; clock-names = "iface"; + resets = <&lpass_audiocc LPASS_AUDIO_SWR_WSA_CGCR>; + reset-names = "swr_audio_cgcr"; label = "WSA"; qcom,din-ports = <2>; @@ -2647,6 +2827,13 @@ status = "disabled"; }; + lpass_audiocc: clock-controller@32a9000 { + compatible = "qcom,sc8280xp-lpassaudiocc"; + reg = <0 0x032a9000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + swr2: soundwire-controller@3330000 { compatible = "qcom,soundwire-v1.6.0"; reg = <0 0x03330000 0 0x2000>; @@ -2656,6 +2843,8 @@ clocks = <&txmacro>; clock-names = "iface"; + resets = <&lpasscc LPASS_AUDIO_SWR_TX_CGCR>; + reset-names = "swr_audio_cgcr"; label = "TX"; #sound-dai-cells = <1>; #address-cells = <2>; @@ -2845,6 +3034,13 @@ }; }; + lpasscc: clock-controller@33e0000 { + compatible = "qcom,sc8280xp-lpasscc"; + reg = <0 0x033e0000 0 0x12000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + sdc2: mmc@8804000 { compatible = "qcom,sc8280xp-sdhci", "qcom,sdhci-msm-v5"; reg = <0 0x08804000 0 0x1000>; diff --git a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts index 7459525d9982..0b23d5bb3f26 100644 --- a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts +++ b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts @@ -134,7 +134,7 @@ reg = <0>; adv7533_in: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; @@ -183,25 +183,25 @@ }; }; -&dsi0 { +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { status = "okay"; vdda-supply = <&vreg_l1a_1p225>; }; -&dsi0_out { +&mdss_dsi0_out { remote-endpoint = <&adv7533_in>; data-lanes = <0 1 2 3>; }; -&dsi0_phy { +&mdss_dsi0_phy { status = "okay"; vcca-supply = <&vreg_l1b_0p925>; }; -&mdss { - status = "okay"; -}; - &mmss_smmu { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index a7d475f23bea..df944f2160e9 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -1461,8 +1461,8 @@ <&sleep_clk>, <&gcc GCC_MMSS_GPLL0_CLK>, <&gcc GCC_MMSS_GPLL0_DIV_CLK>, - <&dsi0_phy 1>, - <&dsi0_phy 0>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi0_phy 0>, <0>, <0>, <0>, @@ -1534,7 +1534,7 @@ port@0 { reg = <0>; mdp5_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; + remote-endpoint = <&mdss_dsi0_in>; }; }; }; @@ -1570,7 +1570,7 @@ }; }; - dsi0: dsi@c994000 { + mdss_dsi0: dsi@c994000 { compatible = "qcom,sdm660-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0x0c994000 0x400>; @@ -1584,8 +1584,8 @@ assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>; - assigned-clock-parents = <&dsi0_phy 0>, - <&dsi0_phy 1>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; clocks = <&mmcc MDSS_MDP_CLK>, <&mmcc MDSS_BYTE0_CLK>, @@ -1606,7 +1606,7 @@ "pixel", "core"; - phys = <&dsi0_phy>; + phys = <&mdss_dsi0_phy>; status = "disabled"; @@ -1616,20 +1616,20 @@ port@0 { reg = <0>; - dsi0_in: endpoint { + mdss_dsi0_in: endpoint { remote-endpoint = <&mdp5_intf1_out>; }; }; port@1 { reg = <1>; - dsi0_out: endpoint { + mdss_dsi0_out: endpoint { }; }; }; }; - dsi0_phy: phy@c994400 { + mdss_dsi0_phy: phy@c994400 { compatible = "qcom,dsi-phy-14nm-660"; reg = <0x0c994400 0x100>, <0x0c994500 0x300>, diff --git a/arch/arm64/boot/dts/qcom/sdm660.dtsi b/arch/arm64/boot/dts/qcom/sdm660.dtsi index f0f27fc12c18..f89b27c99f40 100644 --- a/arch/arm64/boot/dts/qcom/sdm660.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm660.dtsi @@ -148,14 +148,14 @@ port@1 { reg = <1>; mdp5_intf2_out: endpoint { - remote-endpoint = <&dsi1_in>; + remote-endpoint = <&mdss_dsi1_in>; }; }; }; }; &mdss { - dsi1: dsi@c996000 { + mdss_dsi1: dsi@c996000 { compatible = "qcom,sdm660-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0x0c996000 0x400>; @@ -170,8 +170,8 @@ assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>; - assigned-clock-parents = <&dsi1_phy 0>, - <&dsi1_phy 1>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>; clocks = <&mmcc MDSS_MDP_CLK>, <&mmcc MDSS_BYTE1_CLK>, @@ -192,7 +192,7 @@ "pixel", "core"; - phys = <&dsi1_phy>; + phys = <&mdss_dsi1_phy>; status = "disabled"; @@ -202,20 +202,20 @@ port@0 { reg = <0>; - dsi1_in: endpoint { + mdss_dsi1_in: endpoint { remote-endpoint = <&mdp5_intf2_out>; }; }; port@1 { reg = <1>; - dsi1_out: endpoint { + mdss_dsi1_out: endpoint { }; }; }; }; - dsi1_phy: phy@c996400 { + mdss_dsi1_phy: phy@c996400 { compatible = "qcom,dsi-phy-14nm-660"; reg = <0x0c996400 0x100>, <0x0c996500 0x300>, @@ -239,10 +239,10 @@ <&sleep_clk>, <&gcc GCC_MMSS_GPLL0_CLK>, <&gcc GCC_MMSS_GPLL0_DIV_CLK>, - <&dsi0_phy 1>, - <&dsi0_phy 0>, - <&dsi1_phy 1>, - <&dsi1_phy 0>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi1_phy 1>, + <&mdss_dsi1_phy 0>, <0>, <0>; }; diff --git a/arch/arm64/boot/dts/qcom/sdm670.dtsi b/arch/arm64/boot/dts/qcom/sdm670.dtsi index c5f839dd1c6e..624aef6a4a60 100644 --- a/arch/arm64/boot/dts/qcom/sdm670.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm670.dtsi @@ -1264,6 +1264,7 @@ <SLEEP_TCS 3>, <WAKE_TCS 3>, <CONTROL_TCS 1>; + power-domains = <&CLUSTER_PD>; apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi index d05c511718df..1ce413263b7f 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi @@ -636,25 +636,6 @@ }; }; -&dsi0 { - status = "okay"; - vdda-supply = <&vdda_mipi_dsi0_1p2>; - - ports { - port@1 { - endpoint { - remote-endpoint = <&sn65dsi86_in>; - data-lanes = <0 1 2 3>; - }; - }; - }; -}; - -&dsi0_phy { - status = "okay"; - vdds-supply = <&vdda_mipi_dsi0_pll>; -}; - edp_brij_i2c: &i2c3 { status = "okay"; clock-frequency = <400000>; @@ -687,7 +668,7 @@ edp_brij_i2c: &i2c3 { port@0 { reg = <0>; sn65dsi86_in: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; @@ -767,6 +748,25 @@ ap_ts_i2c: &i2c14 { status = "okay"; }; +&mdss_dsi0 { + status = "okay"; + vdda-supply = <&vdda_mipi_dsi0_1p2>; + + ports { + port@1 { + endpoint { + remote-endpoint = <&sn65dsi86_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&mdss_dsi0_phy { + status = "okay"; + vdds-supply = <&vdda_mipi_dsi0_pll>; +}; + /* * Cheza fw does not properly program the GPU aperture to allow the * GPU to update the SMMU pagetables for context switches. Work diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index 4dea2c04b22f..d6b464cb61d6 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -415,53 +415,6 @@ firmware-name = "qcom/sdm845/cdsp.mbn"; }; -&dsi0 { - status = "okay"; - vdda-supply = <&vreg_l26a_1p2>; - - qcom,dual-dsi-mode; - qcom,master-dsi; - - ports { - port@1 { - endpoint { - remote-endpoint = <<9611_a>; - data-lanes = <0 1 2 3>; - }; - }; - }; -}; - -&dsi0_phy { - status = "okay"; - vdds-supply = <&vreg_l1a_0p875>; -}; - -&dsi1 { - vdda-supply = <&vreg_l26a_1p2>; - - qcom,dual-dsi-mode; - - /* DSI1 is slave, so use DSI0 clocks */ - assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; - - status = "okay"; - - ports { - port@1 { - endpoint { - remote-endpoint = <<9611_b>; - data-lanes = <0 1 2 3>; - }; - }; - }; -}; - -&dsi1_phy { - vdds-supply = <&vreg_l1a_0p875>; - status = "okay"; -}; - &gcc { protected-clocks = <GCC_QSPI_CORE_CLK>, <GCC_QSPI_CORE_CLK_SRC>, @@ -517,7 +470,7 @@ reg = <0>; lt9611_a: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; @@ -525,7 +478,7 @@ reg = <1>; lt9611_b: endpoint { - remote-endpoint = <&dsi1_out>; + remote-endpoint = <&mdss_dsi1_out>; }; }; @@ -556,6 +509,53 @@ status = "okay"; }; +&mdss_dsi0 { + status = "okay"; + vdda-supply = <&vreg_l26a_1p2>; + + qcom,dual-dsi-mode; + qcom,master-dsi; + + ports { + port@1 { + endpoint { + remote-endpoint = <<9611_a>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&mdss_dsi0_phy { + status = "okay"; + vdds-supply = <&vreg_l1a_0p875>; +}; + +&mdss_dsi1 { + vdda-supply = <&vreg_l26a_1p2>; + + qcom,dual-dsi-mode; + + /* DSI1 is slave, so use DSI0 clocks */ + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + + status = "okay"; + + ports { + port@1 { + endpoint { + remote-endpoint = <<9611_b>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&mdss_dsi1_phy { + vdds-supply = <&vreg_l1a_0p875>; + status = "okay"; +}; + &mss_pil { status = "okay"; firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn"; @@ -685,10 +685,6 @@ }; }; -&pmi8998_rradc { - status = "okay"; -}; - /* QUAT I2S Uses 4 I2S SD Lines for audio on LT9611 HDMI Bridge */ &q6afedai { dai@22 { diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index d1440b790fa6..b2d4336e764b 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -417,7 +417,43 @@ firmware-name = "qcom/sdm845/cdsp.mdt"; }; -&dsi0 { +&gcc { + protected-clocks = <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <GCC_LPASS_Q6_AXI_CLK>, + <GCC_LPASS_SWAY_CLK>; +}; + +&gmu { + status = "okay"; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sdm845/a630_zap.mbn"; + }; +}; + +&i2c10 { + status = "okay"; + clock-frequency = <400000>; +}; + +&ipa { + qcom,gsi-loader = "self"; + memory-region = <&ipa_fw_mem>; + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { status = "okay"; vdda-supply = <&vdda_mipi_dsi0_1p2>; @@ -448,33 +484,33 @@ port@0 { reg = <0>; truly_in_0: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; port@1 { reg = <1>; truly_in_1: endpoint { - remote-endpoint = <&dsi1_out>; + remote-endpoint = <&mdss_dsi1_out>; }; }; }; }; }; -&dsi0_phy { +&mdss_dsi0_phy { status = "okay"; vdds-supply = <&vdda_mipi_dsi0_pll>; }; -&dsi1 { +&mdss_dsi1 { status = "okay"; vdda-supply = <&vdda_mipi_dsi1_1p2>; qcom,dual-dsi-mode; /* DSI1 is slave, so use DSI0 clocks */ - assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; ports { port@1 { @@ -486,47 +522,11 @@ }; }; -&dsi1_phy { +&mdss_dsi1_phy { status = "okay"; vdds-supply = <&vdda_mipi_dsi1_pll>; }; -&gcc { - protected-clocks = <GCC_QSPI_CORE_CLK>, - <GCC_QSPI_CORE_CLK_SRC>, - <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, - <GCC_LPASS_Q6_AXI_CLK>, - <GCC_LPASS_SWAY_CLK>; -}; - -&gmu { - status = "okay"; -}; - -&gpu { - status = "okay"; - - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm845/a630_zap.mbn"; - }; -}; - -&i2c10 { - status = "okay"; - clock-frequency = <400000>; -}; - -&ipa { - qcom,gsi-loader = "self"; - memory-region = <&ipa_fw_mem>; - status = "okay"; -}; - -&mdss { - status = "okay"; -}; - &mss_pil { status = "okay"; firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi index 5c384345c05d..122c7128dea9 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -336,44 +336,6 @@ firmware-name = "qcom/sdm845/oneplus6/cdsp.mbn"; }; -&dsi0 { - status = "okay"; - vdda-supply = <&vdda_mipi_dsi0_1p2>; - - /* - * Both devices use different panels but all other properties - * are common. Compatible line is declared in device dts. - */ - display_panel: panel@0 { - status = "disabled"; - - reg = <0>; - - vddio-supply = <&vreg_l14a_1p88>; - - reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; - - pinctrl-names = "default"; - pinctrl-0 = <&panel_reset_pins &panel_te_pin &panel_esd_pin>; - - port { - panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - }; -}; - -&dsi0_out { - remote-endpoint = <&panel_in>; - data-lanes = <0 1 2 3>; -}; - -&dsi0_phy { - status = "okay"; - vdds-supply = <&vdda_mipi_dsi0_pll>; -}; - &gcc { protected-clocks = <GCC_QSPI_CORE_CLK>, <GCC_QSPI_CORE_CLK_SRC>, @@ -452,6 +414,44 @@ status = "okay"; }; +&mdss_dsi0 { + status = "okay"; + vdda-supply = <&vdda_mipi_dsi0_1p2>; + + /* + * Both devices use different panels but all other properties + * are common. Compatible line is declared in device dts. + */ + display_panel: panel@0 { + status = "disabled"; + + reg = <0>; + + vddio-supply = <&vreg_l14a_1p88>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_reset_pins &panel_te_pin &panel_esd_pin>; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + status = "okay"; + vdds-supply = <&vdda_mipi_dsi0_pll>; +}; + /* Modem/wifi */ &mss_pil { status = "okay"; @@ -480,7 +480,7 @@ }; }; -&pmi8998_rradc { +&pmi8998_charger { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts index 6cdda971bb4b..623a826b18a3 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts @@ -51,6 +51,10 @@ }; }; +&pmi8998_charger { + monitored-battery = <&battery>; +}; + &sound { model = "OnePlus 6"; audio-routing = "RX_BIAS", "MCLK", diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts index d82c0d4407f0..9471ada0d6ad 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts @@ -47,6 +47,10 @@ "AMIC5", "MIC BIAS3"; }; +&pmi8998_charger { + monitored-battery = <&battery>; +}; + /* * The TFA9894 codec is currently unsupported. * We need to delete the node to allow the soundcard diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts index 1eaff964b202..dce0141f3719 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts @@ -411,44 +411,6 @@ firmware-name = "qcom/sdm845/axolotl/cdsp.mbn"; }; -&dsi0 { - status = "okay"; - vdda-supply = <&vdda_mipi_dsi0_1p2>; - - panel@0 { - compatible = "visionox,rm69299-shift"; - status = "okay"; - reg = <0>; - vdda-supply = <&vreg_l14a_1p88>; - vdd3p3-supply = <&vreg_l28a_3p0>; - - #address-cells = <1>; - #size-cells = <0>; - - reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sde_dsi_active &sde_te_active>; - pinctrl-1 = <&sde_dsi_suspend &sde_te_suspend>; - - port { - panel_in_0: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - }; -}; - -&dsi0_out { - remote-endpoint = <&panel_in_0>; - data-lanes = <0 1 2 3>; -}; - -&dsi0_phy { - status = "okay"; - vdds-supply = <&vdda_mipi_dsi0_pll>; -}; - &gcc { protected-clocks = <GCC_QSPI_CORE_CLK>, <GCC_QSPI_CORE_CLK_SRC>, @@ -494,6 +456,10 @@ }; }; +&i2c10 { + /* SMB1355@0x0C */ +}; + &ipa { qcom,gsi-loader = "self"; memory-region = <&ipa_fw_mem>; @@ -505,6 +471,44 @@ status = "okay"; }; +&mdss_dsi0 { + status = "okay"; + vdda-supply = <&vdda_mipi_dsi0_1p2>; + + panel@0 { + compatible = "visionox,rm69299-shift"; + status = "okay"; + reg = <0>; + vdda-supply = <&vreg_l14a_1p88>; + vdd3p3-supply = <&vreg_l28a_3p0>; + + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sde_dsi_active &sde_te_active>; + pinctrl-1 = <&sde_dsi_suspend &sde_te_suspend>; + + port { + panel_in_0: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel_in_0>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + status = "okay"; + vdds-supply = <&vdda_mipi_dsi0_pll>; +}; + &mss_pil { status = "okay"; firmware-name = "qcom/sdm845/axolotl/mba.mbn", "qcom/sdm845/axolotl/modem.mbn"; @@ -522,6 +526,12 @@ }; }; +&pmi8998_charger { + monitored-battery = <&battery>; + + status = "okay"; +}; + &pm8998_resin { linux,code = <KEY_VOLUMEDOWN>; status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi index 420ffede3e80..3bc187a066ae 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi @@ -368,43 +368,6 @@ status = "okay"; }; -&dsi0 { - vdda-supply = <&vreg_l26a_1p2>; - status = "okay"; - - panel: panel@0 { - /* The compatible is assigned in device DTs. */ - reg = <0>; - - backlight = <&pmi8998_wled>; - vddio-supply = <&vreg_l14a_1p8>; - vsp-supply = <&lab>; - vsn-supply = <&ibb>; - panel-reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; - touch-reset-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; - - pinctrl-0 = <&sde_dsi_active &sde_te_active_sleep>; - pinctrl-1 = <&sde_dsi_sleep &sde_te_active_sleep>; - pinctrl-names = "default", "sleep"; - - port { - panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - }; -}; - -&dsi0_out { - remote-endpoint = <&panel_in>; - data-lanes = <0 1 2 3>; -}; - -&dsi0_phy { - vdds-supply = <&vreg_l1a_0p9>; - status = "okay"; -}; - &gcc { protected-clocks = <GCC_QSPI_CORE_CLK>, <GCC_QSPI_CORE_CLK_SRC>, @@ -515,6 +478,43 @@ status = "okay"; }; +&mdss_dsi0 { + vdda-supply = <&vreg_l26a_1p2>; + status = "okay"; + + panel: panel@0 { + /* The compatible is assigned in device DTs. */ + reg = <0>; + + backlight = <&pmi8998_wled>; + vddio-supply = <&vreg_l14a_1p8>; + vsp-supply = <&lab>; + vsn-supply = <&ibb>; + panel-reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + touch-reset-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&sde_dsi_active &sde_te_active_sleep>; + pinctrl-1 = <&sde_dsi_sleep &sde_te_active_sleep>; + pinctrl-names = "default", "sleep"; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l1a_0p9>; + status = "okay"; +}; + &pm8998_gpios { focus_n: focus-n-state { pins = "gpio2"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi index 5ed975cc6ecb..9d6faeb65624 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi @@ -115,6 +115,14 @@ }; }; + battery: battery { + compatible = "simple-battery"; + + charge-full-design-microamp-hours = <4000000>; + voltage-min-design-microvolt = <3400000>; + voltage-max-design-microvolt = <4400000>; + }; + vreg_s4a_1p8: vreg-s4a-1p8 { compatible = "regulator-fixed"; regulator-name = "vreg_s4a_1p8"; @@ -223,39 +231,6 @@ firmware-name = "qcom/sdm845/beryllium/cdsp.mbn"; }; -&dsi0 { - status = "okay"; - vdda-supply = <&vreg_l26a_1p2>; - - display_panel: panel@0 { - reg = <0>; - vddio-supply = <&vreg_l14a_1p8>; - vddpos-supply = <&lab>; - vddneg-supply = <&ibb>; - - backlight = <&pmi8998_wled>; - reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; - - status = "disabled"; - - port { - panel_in_0: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - }; -}; - -&dsi0_out { - remote-endpoint = <&panel_in_0>; - data-lanes = <0 1 2 3>; -}; - -&dsi0_phy { - status = "okay"; - vdds-supply = <&vreg_l1a_0p875>; -}; - &gcc { protected-clocks = <GCC_QSPI_CORE_CLK>, <GCC_QSPI_CORE_CLK_SRC>, @@ -298,6 +273,39 @@ status = "okay"; }; +&mdss_dsi0 { + status = "okay"; + vdda-supply = <&vreg_l26a_1p2>; + + display_panel: panel@0 { + reg = <0>; + vddio-supply = <&vreg_l14a_1p8>; + vddpos-supply = <&lab>; + vddneg-supply = <&ibb>; + + backlight = <&pmi8998_wled>; + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + + status = "disabled"; + + port { + panel_in_0: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel_in_0>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + status = "okay"; + vdds-supply = <&vreg_l1a_0p875>; +}; + &mss_pil { status = "okay"; firmware-name = "qcom/sdm845/beryllium/mba.mbn", "qcom/sdm845/beryllium/modem.mbn"; @@ -341,12 +349,14 @@ qcom,cabc; }; -&pm8998_resin { - linux,code = <KEY_VOLUMEDOWN>; +&pmi8998_charger { + monitored-battery = <&battery>; + status = "okay"; }; -&pmi8998_rradc { +&pm8998_resin { + linux,code = <KEY_VOLUMEDOWN>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts index 576f0421824f..6db12abaa88d 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts @@ -373,44 +373,6 @@ status = "okay"; }; -&dsi0 { - vdda-supply = <&vdda_mipi_dsi0_1p2>; - status = "okay"; - - display_panel: panel@0 { - compatible = "jdi,fhd-nt35596s"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; - vddio-supply = <&vreg_l14a_1p8>; - backlight = <&pmi8998_wled>; - vddpos-supply = <&lab>; - vddneg-supply = <&ibb>; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sde_dsi_active>; - pinctrl-1 = <&sde_dsi_suspend>; - - port { - panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - }; -}; - -&dsi0_out { - remote-endpoint = <&panel_in>; - data-lanes = <0 1 2 3>; -}; - -&dsi0_phy { - vdds-supply = <&vdda_mipi_dsi0_pll>; - status = "okay"; -}; - &gcc { protected-clocks = <GCC_QSPI_CORE_CLK>, <GCC_QSPI_CORE_CLK_SRC>, @@ -505,6 +467,44 @@ status = "okay"; }; +&mdss_dsi0 { + vdda-supply = <&vdda_mipi_dsi0_1p2>; + status = "okay"; + + display_panel: panel@0 { + compatible = "jdi,fhd-nt35596s"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + vddio-supply = <&vreg_l14a_1p8>; + backlight = <&pmi8998_wled>; + vddpos-supply = <&lab>; + vddneg-supply = <&ibb>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sde_dsi_active>; + pinctrl-1 = <&sde_dsi_suspend>; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vdda_mipi_dsi0_pll>; + status = "okay"; +}; + &mss_pil { firmware-name = "qcom/sdm845/polaris/mba.mbn", "qcom/sdm845/polaris/modem.mbn"; status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index f1dfdd129eab..723c87666680 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -4501,14 +4501,14 @@ port@1 { reg = <1>; dpu_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; + remote-endpoint = <&mdss_dsi0_in>; }; }; port@2 { reg = <2>; dpu_intf2_out: endpoint { - remote-endpoint = <&dsi1_in>; + remote-endpoint = <&mdss_dsi1_in>; }; }; }; @@ -4608,7 +4608,7 @@ }; }; - dsi0: dsi@ae94000 { + mdss_dsi0: dsi@ae94000 { compatible = "qcom,sdm845-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae94000 0 0x400>; @@ -4630,12 +4630,12 @@ "iface", "bus"; assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; - assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; operating-points-v2 = <&dsi_opp_table>; power-domains = <&rpmhpd SDM845_CX>; - phys = <&dsi0_phy>; + phys = <&mdss_dsi0_phy>; status = "disabled"; @@ -4648,20 +4648,20 @@ port@0 { reg = <0>; - dsi0_in: endpoint { + mdss_dsi0_in: endpoint { remote-endpoint = <&dpu_intf1_out>; }; }; port@1 { reg = <1>; - dsi0_out: endpoint { + mdss_dsi0_out: endpoint { }; }; }; }; - dsi0_phy: phy@ae94400 { + mdss_dsi0_phy: phy@ae94400 { compatible = "qcom,dsi-phy-10nm"; reg = <0 0x0ae94400 0 0x200>, <0 0x0ae94600 0 0x280>, @@ -4680,7 +4680,7 @@ status = "disabled"; }; - dsi1: dsi@ae96000 { + mdss_dsi1: dsi@ae96000 { compatible = "qcom,sdm845-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae96000 0 0x400>; @@ -4702,12 +4702,12 @@ "iface", "bus"; assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; - assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>; operating-points-v2 = <&dsi_opp_table>; power-domains = <&rpmhpd SDM845_CX>; - phys = <&dsi1_phy>; + phys = <&mdss_dsi1_phy>; status = "disabled"; @@ -4720,20 +4720,20 @@ port@0 { reg = <0>; - dsi1_in: endpoint { + mdss_dsi1_in: endpoint { remote-endpoint = <&dpu_intf2_out>; }; }; port@1 { reg = <1>; - dsi1_out: endpoint { + mdss_dsi1_out: endpoint { }; }; }; }; - dsi1_phy: phy@ae96400 { + mdss_dsi1_phy: phy@ae96400 { compatible = "qcom,dsi-phy-10nm"; reg = <0 0x0ae96400 0 0x200>, <0 0x0ae96600 0 0x280>, @@ -4895,10 +4895,10 @@ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_DISP_GPLL0_CLK_SRC>, <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>, - <&dsi0_phy 0>, - <&dsi0_phy 1>, - <&dsi1_phy 0>, - <&dsi1_phy 1>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>, <&dp_phy 0>, <&dp_phy 1>; clock-names = "bi_tcxo", @@ -5129,6 +5129,7 @@ <SLEEP_TCS 3>, <WAKE_TCS 3>, <CONTROL_TCS 1>; + power-domains = <&CLUSTER_PD>; apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index 1326c171fe72..cfbc4fc1eba9 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -311,25 +311,6 @@ status = "okay"; }; -&dsi0 { - status = "okay"; - vdda-supply = <&vreg_l26a_1p2>; - - ports { - port@1 { - endpoint { - remote-endpoint = <&sn65dsi86_in_a>; - data-lanes = <0 1 2 3>; - }; - }; - }; -}; - -&dsi0_phy { - status = "okay"; - vdds-supply = <&vreg_l1a_0p875>; -}; - &gcc { protected-clocks = <GCC_QSPI_CORE_CLK>, <GCC_QSPI_CORE_CLK_SRC>, @@ -422,7 +403,7 @@ port@0 { reg = <0>; sn65dsi86_in_a: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; @@ -475,6 +456,25 @@ status = "okay"; }; +&mdss_dsi0 { + status = "okay"; + vdda-supply = <&vreg_l26a_1p2>; + + ports { + port@1 { + endpoint { + remote-endpoint = <&sn65dsi86_in_a>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&mdss_dsi0_phy { + status = "okay"; + vdds-supply = <&vreg_l1a_0p875>; +}; + &mss_pil { status = "okay"; firmware-name = "qcom/sdm850/LENOVO/81JL/qcdsp1v2850.mbn", "qcom/sdm850/LENOVO/81JL/qcdsp2850.mbn"; diff --git a/arch/arm64/boot/dts/qcom/sdx75-idp.dts b/arch/arm64/boot/dts/qcom/sdx75-idp.dts new file mode 100644 index 000000000000..cbe5cdf5a228 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdx75-idp.dts @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "sdx75.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SDX75 IDP"; + compatible = "qcom,sdx75-idp", "qcom,sdx75"; + + aliases { + serial0 = &uart1; + }; +}; + +&chosen { + stdout-path = "serial0:115200n8"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <110 6>; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi new file mode 100644 index 000000000000..21d5d55da5eb --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi @@ -0,0 +1,670 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * SDX75 SoC device tree source + * + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + * + */ + +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sdx75-gcc.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> + +/ { + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&intc>; + + chosen: chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + clock-frequency = <76800000>; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_0>; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + cache-level = <3>; + cache-unified; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_100>; + + L2_100: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_200>; + + L2_200: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_300>; + + L2_300: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + CPU_OFF: cpu-sleep-0 { + compatible = "arm,idle-state"; + entry-latency-us = <235>; + exit-latency-us = <428>; + min-residency-us = <1774>; + arm,psci-suspend-param = <0x40000003>; + local-timer-stop; + }; + + CPU_RAIL_OFF: cpu-rail-sleep-1 { + compatible = "arm,idle-state"; + entry-latency-us = <800>; + exit-latency-us = <750>; + min-residency-us = <4090>; + arm,psci-suspend-param = <0x40000004>; + local-timer-stop; + }; + + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000044>; + entry-latency-us = <1050>; + exit-latency-us = <2500>; + min-residency-us = <5309>; + }; + + CLUSTER_SLEEP_1: cluster-sleep-1 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41001344>; + entry-latency-us = <2761>; + exit-latency-us = <3964>; + min-residency-us = <8467>; + }; + + CLUSTER_SLEEP_2: cluster-sleep-2 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x4100b344>; + entry-latency-us = <2793>; + exit-latency-us = <4023>; + min-residency-us = <9826>; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sdx75", "qcom,scm"; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_OFF &CPU_RAIL_OFF>; + }; + + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_OFF &CPU_RAIL_OFF>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_OFF &CPU_RAIL_OFF>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_OFF &CPU_RAIL_OFF>; + }; + + CLUSTER_PD: power-domain-cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_1 &CLUSTER_SLEEP_2>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gunyah_hyp_mem: gunyah-hyp@80000000 { + reg = <0x0 0x80000000 0x0 0x800000>; + no-map; + }; + + hyp_elf_package_mem: hyp-elf-package@80800000 { + reg = <0x0 0x80800000 0x0 0x200000>; + no-map; + }; + + access_control_db_mem: access-control-db@81380000 { + reg = <0x0 0x81380000 0x0 0x80000>; + no-map; + }; + + qteetz_mem: qteetz@814e0000 { + reg = <0x0 0x814e0000 0x0 0x2a0000>; + no-map; + }; + + trusted_apps_mem: trusted-apps@81780000 { + reg = <0x0 0x81780000 0x0 0xa00000>; + no-map; + }; + + xbl_ramdump_mem: xbl-ramdump@87a00000 { + reg = <0x0 0x87a00000 0x0 0x1c0000>; + no-map; + }; + + cpucp_fw_mem: cpucp-fw@87c00000 { + reg = <0x0 0x87c00000 0x0 0x100000>; + no-map; + }; + + xbl_dtlog_mem: xbl-dtlog@87d00000 { + reg = <0x0 0x87d00000 0x0 0x40000>; + no-map; + }; + + xbl_sc_mem: xbl-sc@87d40000 { + reg = <0x0 0x87d40000 0x0 0x40000>; + no-map; + }; + + modem_efs_shared_mem: modem-efs-shared@87d80000 { + reg = <0x0 0x87d80000 0x0 0x10000>; + no-map; + }; + + aop_image_mem: aop-image@87e00000 { + reg = <0x0 0x87e00000 0x0 0x20000>; + no-map; + }; + + smem_mem: smem@87e20000 { + reg = <0x0 0x87e20000 0x0 0xc0000>; + no-map; + }; + + aop_cmd_db_mem: aop-cmd-db@87ee0000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x87ee0000 0x0 0x20000>; + no-map; + }; + + aop_config_mem: aop-config@87f00000 { + reg = <0x0 0x87f00000 0x0 0x20000>; + no-map; + }; + + ipa_fw_mem: ipa-fw@87f20000 { + reg = <0x0 0x87f20000 0x0 0x10000>; + no-map; + }; + + secdata_mem: secdata@87f30000 { + reg = <0x0 0x87f30000 0x0 0x1000>; + no-map; + }; + + tme_crashdump_mem: tme-crashdump@87f31000 { + reg = <0x0 0x87f31000 0x0 0x40000>; + no-map; + }; + + tme_log_mem: tme-log@87f71000 { + reg = <0x0 0x87f71000 0x0 0x4000>; + no-map; + }; + + uefi_log_mem: uefi-log@87f75000 { + reg = <0x0 0x87f75000 0x0 0x10000>; + no-map; + }; + + qdss_mem: qdss@88800000 { + reg = <0x0 0x88800000 0x0 0x300000>; + no-map; + }; + + audio_heap_mem: audio-heap@88b00000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x88b00000 0x0 0x400000>; + no-map; + }; + + mpss_dsmharq_mem: mpss-dsmharq@88f00000 { + reg = <0x0 0x88f00000 0x0 0x5080000>; + no-map; + }; + + q6_mpss_dtb_mem: q6-mpss-dtb@8df80000 { + reg = <0x0 0x8df80000 0x0 0x80000>; + no-map; + }; + + mpssadsp_mem: mpssadsp@8e000000 { + reg = <0x0 0x8e000000 0x0 0xf400000>; + no-map; + }; + + gunyah_trace_buffer_mem: gunyah-trace-buffer@bdb00000 { + reg = <0x0 0xbdb00000 0x0 0x2000000>; + no-map; + }; + + smmu_debug_buf_mem: smmu-debug-buf@bfb00000 { + reg = <0x0 0xbfb00000 0x0 0x100000>; + no-map; + }; + + hyp_smmu_s2_pt_mem: hyp-smmu-s2-pt@bfc00000 { + reg = <0x0 0xbfc00000 0x0 0x400000>; + no-map; + }; + }; + + smem: qcom,smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + + gcc: clock-controller@80000 { + compatible = "qcom,sdx75-gcc"; + reg = <0x0 0x0080000 0x0 0x1f7400>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + qupv3_id_0: geniqup@9c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x009c0000 0x0 0x2000>; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + clock-names = "m-ahb", + "s-ahb"; + iommus = <&apps_smmu 0xe3 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + uart1: serial@984000 { + compatible = "qcom,geni-debug-uart"; + reg = <0x0 0x00984000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qupv3_se1_2uart_active>; + pinctrl-1 = <&qupv3_se1_2uart_sleep>; + pinctrl-names = "default", + "sleep"; + status = "disabled"; + }; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x40000>; + #hwlock-cells = <1>; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sdx75-pdc", "qcom,pdc"; + reg = <0x0 0xb220000 0x0 0x30000>, + <0x0 0x174000f0 0x0 0x64>; + qcom,pdc-ranges = <0 147 52>, + <52 266 32>, + <84 500 59>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + tlmm: pinctrl@f000000 { + compatible = "qcom,sdx75-tlmm"; + reg = <0x0 0x0f000000 0x0 0x400000>; + interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 133>; + interrupt-controller; + #interrupt-cells = <2>; + wakeup-parent = <&pdc>; + + qupv3_se1_2uart_active: qupv3-se1-2uart-active-state { + tx-pins { + pins = "gpio12"; + function = "qup_se1_l2_mira"; + drive-strength= <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio13"; + function = "qup_se1_l3_mira"; + drive-strength= <2>; + bias-disable; + }; + }; + + qupv3_se1_2uart_sleep: qupv3-se1-2uart-sleep-state { + pins = "gpio12", "gpio13"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sdx75-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x15000000 0x0 0x40000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + dma-coherent; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + }; + + intc: interrupt-controller@17200000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x20000>; + reg = <0x0 0x17200000 0x0 0x10000>, + <0x0 0x17260000 0x0 0x80000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + timer@17420000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x17420000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x20000000>; + + frame@17421000 { + reg = <0x17421000 0x1000>, + <0x17422000 0x1000>; + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + }; + + frame@17423000 { + reg = <0x17423000 0x1000>; + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@17425000 { + reg = <0x17425000 0x1000>; + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@17427000 { + reg = <0x17427000 0x1000>; + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@17429000 { + reg = <0x17429000 0x1000>; + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@1742b000 { + reg = <0x1742b000 0x1000>; + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@1742d000 { + reg = <0x1742d000 0x1000>; + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@17a00000 { + label = "apps_rsc"; + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x17a00000 0x0 0x10000>, + <0x0 0x17a10000 0x0 0x10000>, + <0x0 0x17a20000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + + power-domains = <&CLUSTER_PD>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 3>, + <SLEEP_TCS 2>, + <WAKE_TCS 2>, + <CONTROL_TCS 0>; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,sdx75-rpmh-clk"; + clocks = <&xo_board>; + clock-names = "xo"; + #clock-cells = <1>; + }; + }; + + cpufreq_hw: cpufreq@17d91000 { + compatible = "qcom,sdx75-cpufreq-epss", "qcom,cpufreq-epss"; + reg = <0x0 0x17d91000 0x0 0x1000>; + reg-names = "freq-domain0"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GPLL0>; + clock-names = "xo", + "alternate"; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dcvsh-irq-0"; + #freq-domain-cells = <1>; + #clock-cells = <1>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index 4dffd7974fa3..6a77fd068ec0 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -56,6 +56,8 @@ interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_0: l2-cache { compatible = "cache"; @@ -82,6 +84,8 @@ interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_100: l2-cache { compatible = "cache"; @@ -104,6 +108,8 @@ interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_200: l2-cache { compatible = "cache"; @@ -126,6 +132,8 @@ interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_300: l2-cache { compatible = "cache"; @@ -148,6 +156,8 @@ interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_400: l2-cache { compatible = "cache"; @@ -170,6 +180,8 @@ interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_500: l2-cache { compatible = "cache"; @@ -192,6 +204,8 @@ interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_600: l2-cache { compatible = "cache"; @@ -214,6 +228,8 @@ interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache"; @@ -257,6 +273,76 @@ }; }; }; + + domain-idle-states { + CLUSTER_SLEEP_PC: cluster-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000044>; + entry-latency-us = <2752>; + exit-latency-us = <3048>; + min-residency-us = <6118>; + }; + + CLUSTER_SLEEP_CX_RET: cluster-sleep-1 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41001244>; + entry-latency-us = <3638>; + exit-latency-us = <4562>; + min-residency-us = <8467>; + }; + + CLUSTER_AOSS_SLEEP: cluster-sleep-2 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x4100b244>; + entry-latency-us = <3263>; + exit-latency-us = <6562>; + min-residency-us = <9987>; + }; + }; + + cpu_idle_states: idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "little-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <549>; + exit-latency-us = <901>; + min-residency-us = <1774>; + local-timer-stop; + }; + + LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 { + compatible = "arm,idle-state"; + idle-state-name = "little-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <702>; + exit-latency-us = <915>; + min-residency-us = <4001>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "big-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <523>; + exit-latency-us = <1244>; + min-residency-us = <2207>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_1: cpu-sleep-1-1 { + compatible = "arm,idle-state"; + idle-state-name = "big-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <526>; + exit-latency-us = <1854>; + min-residency-us = <5555>; + local-timer-stop; + }; + }; }; firmware { @@ -378,6 +464,25 @@ }; }; + qup_opp_table: opp-table-qup { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-128000000 { + opp-hz = /bits/ 64 <128000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + pmu { compatible = "arm,armv8-pmuv3"; interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_LOW>; @@ -386,6 +491,61 @@ psci { compatible = "arm,psci-1.0"; method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + }; + + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + }; + + CPU_PD4: power-domain-cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + }; + + CPU_PD5: power-domain-cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + }; + + CPU_PD6: power-domain-cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; + }; + + CPU_PD7: power-domain-cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; + }; + + CLUSTER_PD: power-domain-cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_PC + &CLUSTER_SLEEP_CX_RET + &CLUSTER_AOSS_SLEEP>; + }; }; reserved_memory: reserved-memory { @@ -741,6 +901,22 @@ status = "disabled"; }; + uart1: serial@884000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00884000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart1_cts>, <&qup_uart1_rts>, <&qup_uart1_tx>, <&qup_uart1_rx>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SM6350_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &clk_virt SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + i2c2: i2c@888000 { compatible = "qcom,geni-i2c"; reg = <0 0x00888000 0 0x4000>; @@ -1726,6 +1902,34 @@ drive-strength = <2>; bias-pull-up; }; + + qup_uart1_cts: qup-uart1-cts-default-state { + pins = "gpio61"; + function = "qup01"; + drive-strength = <2>; + bias-disable; + }; + + qup_uart1_rts: qup-uart1-rts-default-state { + pins = "gpio62"; + function = "qup01"; + drive-strength = <2>; + bias-pull-down; + }; + + qup_uart1_rx: qup-uart1-rx-default-state { + pins = "gpio64"; + function = "qup01"; + drive-strength = <2>; + bias-disable; + }; + + qup_uart1_tx: qup-uart1-tx-default-state { + pins = "gpio63"; + function = "qup01"; + drive-strength = <2>; + bias-pull-up; + }; }; apps_smmu: iommu@15000000 { @@ -1905,6 +2109,7 @@ qcom,drv-id = <2>; qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>, <WAKE_TCS 3>, <CONTROL_TCS 1>; + power-domains = <&CLUSTER_PD>; rpmhcc: clock-controller { compatible = "qcom,sm6350-rpmh-clk"; diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi index ae9b6bc446cb..47f0499e6fa8 100644 --- a/arch/arm64/boot/dts/qcom/sm6375.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/clock/qcom,sm6375-gcc.h> +#include <dt-bindings/clock/qcom,sm6375-gpucc.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -1258,6 +1259,42 @@ }; }; + adreno_smmu: iommu@5940000 { + compatible = "qcom,sm6375-smmu-v2", "qcom,smmu-v2"; + reg = <0 0x05940000 0 0x10000>; + #iommu-cells = <1>; + #global-interrupts = <2>; + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>; + clock-names = "bus"; + + power-domains = <&gpucc GPU_CX_GDSC>; + }; + + gpucc: clock-controller@5990000 { + compatible = "qcom,sm6375-gpucc"; + reg = <0 0x05990000 0 0x9000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>; + power-domains = <&rpmpd SM6375_VDDGX>; + required-opps = <&rpmpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + remoteproc_mss: remoteproc@6000000 { compatible = "qcom,sm6375-mpss-pas"; reg = <0 0x06000000 0 0x4040>; diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts index 7ae6aba5d2ec..e3dc49951523 100644 --- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts @@ -31,6 +31,7 @@ aliases { serial0 = &uart9; + serial1 = &uart1; }; chosen { @@ -524,6 +525,39 @@ }; }; +&qup_uart1_cts { + /* + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. + */ + bias-bus-hold; +}; + +&qup_uart1_rts { + /* We'll drive RTS, so no pull */ + drive-strength = <2>; + bias-disable; +}; + +&qup_uart1_rx { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module is + * in tri-state (module powered off or not driving the + * signal yet). + */ + bias-pull-up; +}; + +&qup_uart1_tx { + /* We'll drive TX, so no pull */ + drive-strength = <2>; + bias-disable; +}; + &qupv3_id_0 { status = "okay"; }; @@ -561,6 +595,75 @@ &tlmm { gpio-reserved-ranges = <13 4>, <56 2>; + + qup_uart1_sleep_cts: qup-uart1-sleep-cts-state { + pins = "gpio61"; + function = "gpio"; + /* + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. + */ + bias-bus-hold; + }; + + qup_uart1_sleep_rts: qup-uart1-sleep-rts-state { + pins = "gpio62"; + function = "gpio"; + /* + * Configure pull-down on RTS. As RTS is active low + * signal, pull it low to indicate the BT SoC that it + * can wakeup the system anytime from suspend state by + * pulling RX low (by sending wakeup bytes). + */ + bias-pull-down; + }; + + qup_uart1_sleep_rx: qup-uart1-sleep-rx-state { + pins = "gpio64"; + function = "gpio"; + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module + * is floating which may cause spurious wakeups. + */ + bias-pull-up; + }; + + qup_uart1_sleep_tx: qup-uart1-sleep-tx-state { + pins = "gpio63"; + function = "gpio"; + /* + * Configure pull-up on TX when it isn't actively driven + * to prevent BT SoC from receiving garbage during sleep. + */ + bias-pull-up; + }; +}; + +&uart1 { + /delete-property/ interrupts; + interrupts-extended = <&intc GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 64 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default", "sleep"; + pinctrl-1 = <&qup_uart1_sleep_cts>, <&qup_uart1_sleep_rts>, <&qup_uart1_sleep_tx>, <&qup_uart1_sleep_rx>; + + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3988-bt"; + + vddio-supply = <&vreg_l11a>; + vddxo-supply = <&vreg_l7a>; + vddrf-supply = <&vreg_l2e>; + vddch0-supply = <&vreg_l10e>; + swctrl-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>; + + max-speed = <3200000>; + }; }; &uart9 { diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index 2a5b2b99968a..3a98995c0f18 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -55,8 +55,8 @@ next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>; power-domains = <&CPU_PD0>; power-domain-names = "psci"; #cooling-cells = <2>; @@ -82,8 +82,8 @@ next-level-cache = <&L2_100>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>; power-domains = <&CPU_PD1>; power-domain-names = "psci"; #cooling-cells = <2>; @@ -105,8 +105,8 @@ next-level-cache = <&L2_200>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>; power-domains = <&CPU_PD2>; power-domain-names = "psci"; #cooling-cells = <2>; @@ -128,8 +128,8 @@ next-level-cache = <&L2_300>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>; power-domains = <&CPU_PD3>; power-domain-names = "psci"; #cooling-cells = <2>; @@ -151,8 +151,8 @@ next-level-cache = <&L2_400>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>; power-domains = <&CPU_PD4>; power-domain-names = "psci"; #cooling-cells = <2>; @@ -174,8 +174,8 @@ next-level-cache = <&L2_500>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>; power-domains = <&CPU_PD5>; power-domain-names = "psci"; #cooling-cells = <2>; @@ -197,8 +197,8 @@ next-level-cache = <&L2_600>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>; power-domains = <&CPU_PD6>; power-domain-names = "psci"; #cooling-cells = <2>; @@ -220,8 +220,8 @@ next-level-cache = <&L2_700>; qcom,freq-domain = <&cpufreq_hw 2>; operating-points-v2 = <&cpu7_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>; power-domains = <&CPU_PD7>; power-domain-names = "psci"; #cooling-cells = <2>; @@ -1751,49 +1751,49 @@ config_noc: interconnect@1500000 { compatible = "qcom,sm8150-config-noc"; reg = <0 0x01500000 0 0x7400>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; system_noc: interconnect@1620000 { compatible = "qcom,sm8150-system-noc"; reg = <0 0x01620000 0 0x19400>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; mc_virt: interconnect@163a000 { compatible = "qcom,sm8150-mc-virt"; reg = <0 0x0163a000 0 0x1000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; aggre1_noc: interconnect@16e0000 { compatible = "qcom,sm8150-aggre1-noc"; reg = <0 0x016e0000 0 0xd080>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; aggre2_noc: interconnect@1700000 { compatible = "qcom,sm8150-aggre2-noc"; reg = <0 0x01700000 0 0x20000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; compute_noc: interconnect@1720000 { compatible = "qcom,sm8150-compute-noc"; reg = <0 0x01720000 0 0x7000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; mmss_noc: interconnect@1740000 { compatible = "qcom,sm8150-mmss-noc"; reg = <0 0x01740000 0 0x1c100>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; @@ -2111,7 +2111,7 @@ <&apps_smmu 0x506 0x0011>, <&apps_smmu 0x508 0x0011>, <&apps_smmu 0x512 0x0000>; - interconnects = <&aggre2_noc MASTER_CRYPTO_CORE_0 &mc_virt SLAVE_EBI_CH0>; + interconnects = <&aggre2_noc MASTER_CRYPTO_CORE_0 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "memory"; }; @@ -3538,14 +3538,14 @@ dc_noc: interconnect@9160000 { compatible = "qcom,sm8150-dc-noc"; reg = <0 0x09160000 0 0x3200>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; gem_noc: interconnect@9680000 { compatible = "qcom,sm8150-gem-noc"; reg = <0 0x09680000 0 0x3e200>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; @@ -3586,6 +3586,10 @@ resets = <&gcc GCC_USB30_PRIM_BCR>; + interconnects = <&aggre1_noc MASTER_USB3 0 &mc_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>; + interconnect-names = "usb-ddr", "apps-usb"; + usb_1_dwc3: usb@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xcd00>; @@ -3635,6 +3639,10 @@ resets = <&gcc GCC_USB30_SEC_BCR>; + interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_1 0>; + interconnect-names = "usb-ddr", "apps-usb"; + usb_2_dwc3: usb@a800000 { compatible = "snps,dwc3"; reg = <0 0x0a800000 0 0xcd00>; @@ -3650,7 +3658,7 @@ camnoc_virt: interconnect@ac00000 { compatible = "qcom,sm8150-camnoc-virt"; reg = <0 0x0ac00000 0 0x1000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; @@ -3659,8 +3667,8 @@ reg = <0 0x0ae00000 0 0x1000>; reg-names = "mdss"; - interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>, - <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>; + interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&mmss_noc MASTER_MDP_PORT1 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "mdp0-mem", "mdp1-mem"; power-domains = <&dispcc MDSS_GDSC>; @@ -4325,7 +4333,7 @@ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; clock-names = "xo", "alternate"; - #interconnect-cells = <1>; + #interconnect-cells = <2>; }; cpufreq_hw: cpufreq@18323000 { diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi index 8d4352c8c543..8ab82bacba81 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi @@ -26,9 +26,10 @@ framebuffer: framebuffer@9c000000 { compatible = "simple-framebuffer"; reg = <0 0x9c000000 0 0x2300000>; - width = <1644>; - height = <3840>; - stride = <(1644 * 4)>; + /* pdx203 BL initializes in 2.5k mode, not 4k */ + width = <1096>; + height = <2560>; + stride = <(1096 * 4)>; format = "a8r8g8b8"; /* * That's a lot of clocks, but it's necessary due diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi index eaac00085894..b841ea9192ae 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi @@ -470,75 +470,6 @@ status = "okay"; }; -&dsi0 { - vdda-supply = <&vreg_l9a_1p2>; - qcom,dual-dsi-mode; - qcom,sync-dual-dsi; - qcom,master-dsi; - status = "okay"; - - display_panel: panel@0 { - reg = <0>; - vddio-supply = <&vreg_l14a_1p88>; - reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>; - backlight = <&backlight>; - - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - panel_in_0: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - - port@1{ - reg = <1>; - - panel_in_1: endpoint { - remote-endpoint = <&dsi1_out>; - }; - }; - }; - }; -}; - -&dsi0_out { - data-lanes = <0 1 2>; - remote-endpoint = <&panel_in_0>; -}; - -&dsi0_phy { - vdds-supply = <&vreg_l5a_0p88>; - phy-type = <PHY_TYPE_CPHY>; - status = "okay"; -}; - -&dsi1 { - vdda-supply = <&vreg_l9a_1p2>; - qcom,dual-dsi-mode; - qcom,sync-dual-dsi; - /* DSI1 is slave, so use DSI0 clocks */ - assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; - status = "okay"; -}; - -&dsi1_out { - data-lanes = <0 1 2>; - remote-endpoint = <&panel_in_1>; -}; - -&dsi1_phy { - vdds-supply = <&vreg_l5a_0p88>; - phy-type = <PHY_TYPE_CPHY>; - status = "okay"; -}; - &gmu { status = "okay"; }; @@ -607,6 +538,75 @@ status = "okay"; }; +&mdss_dsi0 { + vdda-supply = <&vreg_l9a_1p2>; + qcom,dual-dsi-mode; + qcom,sync-dual-dsi; + qcom,master-dsi; + status = "okay"; + + display_panel: panel@0 { + reg = <0>; + vddio-supply = <&vreg_l14a_1p88>; + reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>; + backlight = <&backlight>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + panel_in_0: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@1{ + reg = <1>; + + panel_in_1: endpoint { + remote-endpoint = <&mdss_dsi1_out>; + }; + }; + }; + }; +}; + +&mdss_dsi0_out { + data-lanes = <0 1 2>; + remote-endpoint = <&panel_in_0>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l5a_0p88>; + phy-type = <PHY_TYPE_CPHY>; + status = "okay"; +}; + +&mdss_dsi1 { + vdda-supply = <&vreg_l9a_1p2>; + qcom,dual-dsi-mode; + qcom,sync-dual-dsi; + /* DSI1 is slave, so use DSI0 clocks */ + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + status = "okay"; +}; + +&mdss_dsi1_out { + data-lanes = <0 1 2>; + remote-endpoint = <&panel_in_1>; +}; + +&mdss_dsi1_phy { + vdds-supply = <&vreg_l5a_0p88>; + phy-type = <PHY_TYPE_CPHY>; + status = "okay"; +}; + &pcie0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index e5c60a6e4074..83ab6de459bc 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -106,8 +106,8 @@ power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&epss_l3 MASTER_OSM_L3_APPS 0 &epss_l3 SLAVE_OSM_L3 0>; #cooling-cells = <2>; L2_0: l2-cache { compatible = "cache"; @@ -137,8 +137,8 @@ power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&epss_l3 MASTER_OSM_L3_APPS 0 &epss_l3 SLAVE_OSM_L3 0>; #cooling-cells = <2>; L2_100: l2-cache { compatible = "cache"; @@ -162,8 +162,8 @@ power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&epss_l3 MASTER_OSM_L3_APPS 0 &epss_l3 SLAVE_OSM_L3 0>; #cooling-cells = <2>; L2_200: l2-cache { compatible = "cache"; @@ -187,8 +187,8 @@ power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&epss_l3 MASTER_OSM_L3_APPS 0 &epss_l3 SLAVE_OSM_L3 0>; #cooling-cells = <2>; L2_300: l2-cache { compatible = "cache"; @@ -212,8 +212,8 @@ power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&epss_l3 MASTER_OSM_L3_APPS 0 &epss_l3 SLAVE_OSM_L3 0>; #cooling-cells = <2>; L2_400: l2-cache { compatible = "cache"; @@ -237,8 +237,8 @@ power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&epss_l3 MASTER_OSM_L3_APPS 0 &epss_l3 SLAVE_OSM_L3 0>; #cooling-cells = <2>; L2_500: l2-cache { compatible = "cache"; @@ -262,8 +262,8 @@ power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&epss_l3 MASTER_OSM_L3_APPS 0 &epss_l3 SLAVE_OSM_L3 0>; #cooling-cells = <2>; L2_600: l2-cache { compatible = "cache"; @@ -287,8 +287,8 @@ power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 2>; operating-points-v2 = <&cpu7_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&epss_l3 MASTER_OSM_L3_APPS 0 &epss_l3 SLAVE_OSM_L3 0>; #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache"; @@ -1789,49 +1789,49 @@ config_noc: interconnect@1500000 { compatible = "qcom,sm8250-config-noc"; reg = <0 0x01500000 0 0xa580>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; system_noc: interconnect@1620000 { compatible = "qcom,sm8250-system-noc"; reg = <0 0x01620000 0 0x1c200>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; mc_virt: interconnect@163d000 { compatible = "qcom,sm8250-mc-virt"; reg = <0 0x0163d000 0 0x1000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; aggre1_noc: interconnect@16e0000 { compatible = "qcom,sm8250-aggre1-noc"; reg = <0 0x016e0000 0 0x1f180>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; aggre2_noc: interconnect@1700000 { compatible = "qcom,sm8250-aggre2-noc"; reg = <0 0x01700000 0 0x33000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; compute_noc: interconnect@1733000 { compatible = "qcom,sm8250-compute-noc"; reg = <0 0x01733000 0 0xa180>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; mmss_noc: interconnect@1740000 { compatible = "qcom,sm8250-mmss-noc"; reg = <0 0x01740000 0 0x1f080>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; @@ -2260,7 +2260,7 @@ <&apps_smmu 0x59f 0x0000>, <&apps_smmu 0x586 0x0011>, <&apps_smmu 0x596 0x0011>; - interconnects = <&aggre2_noc MASTER_CRYPTO_CORE_0 &mc_virt SLAVE_EBI_CH0>; + interconnects = <&aggre2_noc MASTER_CRYPTO_CORE_0 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "memory"; }; @@ -3693,21 +3693,21 @@ dc_noc: interconnect@90c0000 { compatible = "qcom,sm8250-dc-noc"; reg = <0 0x090c0000 0 0x4200>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; gem_noc: interconnect@9100000 { compatible = "qcom,sm8250-gem-noc"; reg = <0 0x09100000 0 0xb4000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; npu_noc: interconnect@9990000 { compatible = "qcom,sm8250-npu-noc"; reg = <0 0x09990000 0 0x1600>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; @@ -3750,6 +3750,10 @@ resets = <&gcc GCC_USB30_PRIM_BCR>; + interconnects = <&aggre1_noc MASTER_USB3 0 &mc_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>; + interconnect-names = "usb-ddr", "apps-usb"; + usb_1_dwc3: usb@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xcd00>; @@ -3810,6 +3814,10 @@ resets = <&gcc GCC_USB30_SEC_BCR>; + interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI_CH0 0>, + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_1 0>; + interconnect-names = "usb-ddr", "apps-usb"; + usb_2_dwc3: usb@a800000 { compatible = "snps,dwc3"; reg = <0 0x0a800000 0 0xcd00>; @@ -3837,8 +3845,8 @@ <&videocc VIDEO_CC_MVS0_CLK>; clock-names = "iface", "core", "vcodec0_core"; - interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_VENUS_CFG>, - <&mmss_noc MASTER_VIDEO_P0 &mc_virt SLAVE_EBI_CH0>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_VENUS_CFG 0>, + <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "cpu-cfg", "video-mem"; iommus = <&apps_smmu 0x2100 0x0400>; @@ -4122,10 +4130,10 @@ <&apps_smmu 0xc40 0x400>, <&apps_smmu 0xc41 0x400>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_CAMERA_CFG>, - <&mmss_noc MASTER_CAMNOC_HF &mc_virt SLAVE_EBI_CH0>, - <&mmss_noc MASTER_CAMNOC_SF &mc_virt SLAVE_EBI_CH0>, - <&mmss_noc MASTER_CAMNOC_ICP &mc_virt SLAVE_EBI_CH0>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_CAMERA_CFG 0>, + <&mmss_noc MASTER_CAMNOC_HF 0 &mc_virt SLAVE_EBI_CH0 0>, + <&mmss_noc MASTER_CAMNOC_SF 0 &mc_virt SLAVE_EBI_CH0 0>, + <&mmss_noc MASTER_CAMNOC_ICP 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "cam_ahb", "cam_hf_0_mnoc", "cam_sf_0_mnoc", @@ -4182,8 +4190,8 @@ reg = <0 0x0ae00000 0 0x1000>; reg-names = "mdss"; - interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>, - <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>; + interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&mmss_noc MASTER_MDP_PORT1 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "mdp0-mem", "mdp1-mem"; power-domains = <&dispcc MDSS_GDSC>; @@ -4234,14 +4242,14 @@ port@0 { reg = <0>; dpu_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; + remote-endpoint = <&mdss_dsi0_in>; }; }; port@1 { reg = <1>; dpu_intf2_out: endpoint { - remote-endpoint = <&dsi1_in>; + remote-endpoint = <&mdss_dsi1_in>; }; }; }; @@ -4271,7 +4279,7 @@ }; }; - dsi0: dsi@ae94000 { + mdss_dsi0: dsi@ae94000 { compatible = "qcom,sm8250-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae94000 0 0x400>; @@ -4294,12 +4302,12 @@ "bus"; assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; - assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; operating-points-v2 = <&dsi_opp_table>; power-domains = <&rpmhpd SM8250_MMCX>; - phys = <&dsi0_phy>; + phys = <&mdss_dsi0_phy>; status = "disabled"; @@ -4312,14 +4320,14 @@ port@0 { reg = <0>; - dsi0_in: endpoint { + mdss_dsi0_in: endpoint { remote-endpoint = <&dpu_intf1_out>; }; }; port@1 { reg = <1>; - dsi0_out: endpoint { + mdss_dsi0_out: endpoint { }; }; }; @@ -4344,7 +4352,7 @@ }; }; - dsi0_phy: phy@ae94400 { + mdss_dsi0_phy: phy@ae94400 { compatible = "qcom,dsi-phy-7nm"; reg = <0 0x0ae94400 0 0x200>, <0 0x0ae94600 0 0x280>, @@ -4363,7 +4371,7 @@ status = "disabled"; }; - dsi1: dsi@ae96000 { + mdss_dsi1: dsi@ae96000 { compatible = "qcom,sm8250-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae96000 0 0x400>; @@ -4386,12 +4394,12 @@ "bus"; assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; - assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>; operating-points-v2 = <&dsi_opp_table>; power-domains = <&rpmhpd SM8250_MMCX>; - phys = <&dsi1_phy>; + phys = <&mdss_dsi1_phy>; status = "disabled"; @@ -4404,20 +4412,20 @@ port@0 { reg = <0>; - dsi1_in: endpoint { + mdss_dsi1_in: endpoint { remote-endpoint = <&dpu_intf2_out>; }; }; port@1 { reg = <1>; - dsi1_out: endpoint { + mdss_dsi1_out: endpoint { }; }; }; }; - dsi1_phy: phy@ae96400 { + mdss_dsi1_phy: phy@ae96400 { compatible = "qcom,dsi-phy-7nm"; reg = <0 0x0ae96400 0 0x200>, <0 0x0ae96600 0 0x280>, @@ -4443,10 +4451,10 @@ power-domains = <&rpmhpd SM8250_MMCX>; required-opps = <&rpmhpd_opp_low_svs>; clocks = <&rpmhcc RPMH_CXO_CLK>, - <&dsi0_phy 0>, - <&dsi0_phy 1>, - <&dsi1_phy 0>, - <&dsi1_phy 1>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>, <&dp_phy 0>, <&dp_phy 1>; clock-names = "bi_tcxo", @@ -5671,7 +5679,7 @@ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; clock-names = "xo", "alternate"; - #interconnect-cells = <1>; + #interconnect-cells = <2>; }; cpufreq_hw: cpufreq@18591000 { diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts index d3788bd72ac3..61dd9663fabe 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts @@ -424,10 +424,6 @@ }; }; -&mdss_mdp { - status = "okay"; -}; - &mpss { status = "okay"; firmware-name = "qcom/sm8350/modem.mbn"; diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index d2024ba5a754..39d0b347cbf7 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -2295,6 +2295,10 @@ resets = <&gcc GCC_USB30_PRIM_BCR>; + interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>; + interconnect-names = "usb-ddr", "apps-usb"; + usb_1_dwc3: usb@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xcd00>; @@ -2364,6 +2368,10 @@ resets = <&gcc GCC_USB30_SEC_BCR>; + interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>; + interconnect-names = "usb-ddr", "apps-usb"; + usb_2_dwc3: usb@a800000 { compatible = "snps,dwc3"; reg = <0 0x0a800000 0 0xcd00>; diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts index d5aeb7319776..bc4c125d1832 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts @@ -568,10 +568,6 @@ }; }; -&mdss_mdp { - status = "okay"; -}; - &pcie0 { status = "okay"; max-link-speed = <2>; diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index ca147bad902b..79174e0d20a2 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -4297,6 +4297,10 @@ resets = <&gcc GCC_USB30_PRIM_BCR>; + interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>; + interconnect-names = "usb-ddr", "apps-usb"; + usb_1_dwc3: usb@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xcd00>; diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts index 579f65f52370..ec86c5f38045 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts @@ -87,6 +87,87 @@ }; }; + sound { + compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard"; + model = "SM8550-MTP"; + audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", + "SpkrRight IN", "WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS1", + "VA DMIC1", "MIC BIAS1", + "VA DMIC2", "MIC BIAS3", + "TX DMIC0", "MIC BIAS1", + "TX DMIC1", "MIC BIAS2", + "TX DMIC2", "MIC BIAS3", + "TX SWR_ADC1", "ADC2_OUTPUT"; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + va-dai-link { + link-name = "VA Capture"; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&lpass_vamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -419,6 +500,24 @@ }; }; +&lpass_tlmm { + spkr_1_sd_n_active: spkr-1-sd-n-active-state { + pins = "gpio17"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + + spkr_2_sd_n_active: spkr-2-sd-n-active-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + &mdss { status = "okay"; }; @@ -553,6 +652,36 @@ clock-frequency = <32000>; }; +&swr0 { + status = "okay"; + + /* WSA8845 */ + left_spkr: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + pinctrl-names = "default"; + pinctrl-0 = <&spkr_1_sd_n_active>; + powerdown-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l3g_1p2>; + }; + + /* WSA8845 */ + right_spkr: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + pinctrl-names = "default"; + pinctrl-0 = <&spkr_2_sd_n_active>; + powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l3g_1p2>; + }; +}; + &swr1 { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts index 8669d29144bb..ec4feee6837d 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts @@ -54,6 +54,22 @@ stdout-path = "serial0:115200n8"; }; + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&volume_up_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + pmic-glink { compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink"; #address-cells = <1>; @@ -88,6 +104,87 @@ }; }; + sound { + compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard"; + model = "SM8550-QRD"; + audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", + "SpkrRight IN", "WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS1", + "VA DMIC1", "MIC BIAS1", + "VA DMIC2", "MIC BIAS3", + "TX DMIC0", "MIC BIAS1", + "TX DMIC1", "MIC BIAS2", + "TX DMIC2", "MIC BIAS3", + "TX SWR_ADC1", "ADC2_OUTPUT"; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&north_spkr>, <&south_spkr>, <&swr0 0>, <&lpass_wsamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + va-dai-link { + link-name = "VA Capture"; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&lpass_vamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -431,6 +528,24 @@ <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; }; +&lpass_tlmm { + spkr_1_sd_n_active: spkr-1-sd-n-active-state { + pins = "gpio17"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + + spkr_2_sd_n_active: spkr-2-sd-n-active-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + &mdss { status = "okay"; }; @@ -516,11 +631,58 @@ }; }; +&pm8550_gpios { + volume_up_n: volume-up-n-state { + pins = "gpio6"; + function = "normal"; + power-source = <1>; + bias-pull-up; + input-enable; + }; +}; + +&pm8550_pwm { + status = "okay"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_RED>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_BLUE>; + }; + }; +}; + &pm8550b_eusb2_repeater { vdd18-supply = <&vreg_l15b_1p8>; vdd3-supply = <&vreg_l5b_3p1>; }; +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + + status = "okay"; +}; + &pcie_1_phy_aux_clk { clock-frequency = <1000>; }; @@ -551,6 +713,36 @@ clock-frequency = <32000>; }; +&swr0 { + status = "okay"; + + /* WSA8845, Speaker North */ + north_spkr: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + pinctrl-names = "default"; + pinctrl-0 = <&spkr_1_sd_n_active>; + powerdown-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l3g_1p2>; + }; + + /* WSA8845, Speaker South */ + south_spkr: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + pinctrl-names = "default"; + pinctrl-0 = <&spkr_2_sd_n_active>; + powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l3g_1p2>; + }; +}; + &swr1 { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi index 20924d570c07..ccf21d99cb8f 100644 --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi @@ -2486,6 +2486,13 @@ remote-endpoint = <&mdss_dsi1_in>; }; }; + + port@2 { + reg = <2>; + dpu_intf0_out: endpoint { + remote-endpoint = <&mdss_dp0_in>; + }; + }; }; mdp_opp_table: opp-table { @@ -2513,6 +2520,84 @@ }; }; + mdss_dp0: displayport-controller@ae90000 { + compatible = "qcom,sm8550-dp", "qcom,sm8350-dp"; + reg = <0 0xae90000 0 0x200>, + <0 0xae90200 0 0x200>, + <0 0xae90400 0 0xc00>, + <0 0xae91000 0 0x400>, + <0 0xae91400 0 0x400>; + interrupt-parent = <&mdss>; + interrupts = <12>; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd SM8550_MMCX>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dp0_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dp0_out: endpoint { + }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-162000000 { + opp-hz = /bits/ 64 <162000000>; + required-opps = <&rpmhpd_opp_low_svs_d1>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + mdss_dsi0: dsi@ae94000 { compatible = "qcom,sm8550-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae94000 0 0x400>; @@ -2696,8 +2781,8 @@ <&mdss_dsi0_phy 1>, <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>, - <0>, /* dp0 */ - <0>, + <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, <0>, /* dp1 */ <0>, <0>, /* dp2 */ @@ -2784,6 +2869,10 @@ resets = <&gcc GCC_USB30_PRIM_BCR>; + interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>; + interconnect-names = "usb-ddr", "apps-usb"; + status = "disabled"; usb_1_dwc3: usb@a600000 { @@ -3612,6 +3701,7 @@ qcom,drv-id = <2>; qcom,tcs-config = <ACTIVE_TCS 3>, <SLEEP_TCS 2>, <WAKE_TCS 2>, <CONTROL_TCS 0>; + power-domains = <&CLUSTER_PD>; apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; @@ -3640,15 +3730,15 @@ opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; }; - rpmhpd_opp_lov_svs_d2: opp-52 { + rpmhpd_opp_low_svs_d2: opp-52 { opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>; }; - rpmhpd_opp_lov_svs_d1: opp-56 { + rpmhpd_opp_low_svs_d1: opp-56 { opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>; }; - rpmhpd_opp_lov_svs_d0: opp-60 { + rpmhpd_opp_low_svs_d0: opp-60 { opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>; }; |