ARM: davinci: remove unused board support

All Kconfig entries marked as "depends on UNUSED_BOARD_FILES"
and their direct dependencies are removed here as planned.

Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

12 files changed, 2 insertions, 7272 deletions

diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index c8cbd9a30791..588213583051 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -14,20 +14,11 @@ menuconfig ARCH_DAVINCI
 
 if ARCH_DAVINCI
 
-config ARCH_DAVINCI_DMx
-	bool
-
 comment "DaVinci Core Type"
 
-config ARCH_DAVINCI_DM355
-	bool "DaVinci 355 based system"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select DAVINCI_AINTC
-	select ARCH_DAVINCI_DMx
-
 config ARCH_DAVINCI_DA830
 	bool "DA830/OMAP-L137/AM17x based system"
-	depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT)
+	depends on AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT
 	depends on ATAGS
 	select ARCH_DAVINCI_DA8XX
 	# needed on silicon revs 1.0, 1.1:
@@ -36,7 +27,7 @@ config ARCH_DAVINCI_DA830
 
 config ARCH_DAVINCI_DA850
 	bool "DA850/OMAP-L138/AM18x based system"
-	depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT)
+	depends on AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT
 	depends on ATAGS
 	select ARCH_DAVINCI_DA8XX
 	select DAVINCI_CP_INTC
@@ -44,12 +35,6 @@ config ARCH_DAVINCI_DA850
 config ARCH_DAVINCI_DA8XX
 	bool
 
-config ARCH_DAVINCI_DM365
-	bool "DaVinci 365 based system"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select DAVINCI_AINTC
-	select ARCH_DAVINCI_DMx
-
 comment "DaVinci Board Type"
 
 config MACH_DA8XX_DT
@@ -61,117 +46,6 @@ config MACH_DA8XX_DT
 	  Say y here to include support for TI DaVinci DA850 based using
 	  Flattened Device Tree. More information at Documentation/devicetree
 
-config MACH_DAVINCI_DM355_EVM
-	bool "TI DM355 EVM"
-	default ARCH_DAVINCI_DM355
-	depends on ARCH_DAVINCI_DM355
-	help
-	  Configure this option to specify the whether the board used
-	  for development is a DM355 EVM
-
-config MACH_DM355_LEOPARD
-	bool "DM355 Leopard board"
-	depends on ARCH_DAVINCI_DM355
-	help
-	  Configure this option to specify the whether the board used
-	  for development is a DM355 Leopard board.
-
-config MACH_DAVINCI_DM365_EVM
-	bool "TI DM365 EVM"
-	default ARCH_DAVINCI_DM365
-	depends on ARCH_DAVINCI_DM365
-	help
-	  Configure this option to specify whether the board used
-	  for development is a DM365 EVM
-
-config MACH_DAVINCI_DA830_EVM
-	bool "TI DA830/OMAP-L137/AM17x Reference Platform"
-	default ARCH_DAVINCI_DA830
-	depends on ATAGS && UNUSED_BOARD_FILES
-	depends on ARCH_DAVINCI_DA830
-	select GPIO_PCF857X if I2C
-	help
-	  Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
-
-choice
-	prompt "Select DA830/OMAP-L137/AM17x UI board peripheral"
-	depends on MACH_DAVINCI_DA830_EVM
-	help
-	  The presence of UI card on the DA830/OMAP-L137/AM17x EVM is
-	  detected automatically based on successful probe of the I2C
-	  based GPIO expander on that board. This option selected in this
-	  menu has an effect only in case of a successful UI card detection.
-
-config DA830_UI_LCD
-	bool "LCD"
-	help
-	  Say Y here to use the LCD as a framebuffer or simple character
-	  display.
-
-config DA830_UI_NAND
-	bool "NAND flash"
-	help
-	  Say Y here to use the NAND flash. Do not forget to setup
-	  the switch correctly.
-endchoice
-
-config MACH_DAVINCI_DA850_EVM
-	bool "TI DA850/OMAP-L138/AM18x Reference Platform"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	default ARCH_DAVINCI_DA850
-	depends on ARCH_DAVINCI_DA850
-	help
-	  Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module.
-
-choice
-	prompt "Select peripherals connected to expander on UI board"
-	depends on MACH_DAVINCI_DA850_EVM
-	help
-	  The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x
-	  EVM is detected automatically based on successful probe of the I2C
-	  based GPIO expander on that card. This option selected in this
-	  menu has an effect only in case of a successful UI card detection.
-
-config DA850_UI_NONE
-	bool "No peripheral is enabled"
-	help
-	  Say Y if you do not want to enable any of the peripherals connected
-	  to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card
-
-config DA850_UI_RMII
-	bool "RMII Ethernet PHY"
-	help
-	  Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x
-	  EVM. This PHY is found on the UI daughter card that is supplied with
-	  the EVM.
-	  NOTE: Please take care while choosing this option, MII PHY will
-	  not be functional if RMII mode is selected.
-
-config DA850_UI_SD_VIDEO_PORT
-	bool "Video Port Interface"
-	help
-	  Say Y if you want to use Video Port Interface (VPIF) on the
-	  DA850/OMAP-L138 EVM. The Video decoders/encoders are found on the
-	  UI daughter card that is supplied with the EVM.
-
-endchoice
-
-config MACH_MITYOMAPL138
-	bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
-	depends on ARCH_DAVINCI_DA850
-	depends on ATAGS && UNUSED_BOARD_FILES
-	help
-	  Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
-	  System on Module.  Information on this SoM may be found at
-	  https://www.mitydsp.com
-
-config MACH_OMAPL138_HAWKBOARD
-	bool "TI AM1808 / OMAPL-138 Hawkboard platform"
-	depends on ARCH_DAVINCI_DA850
-	depends on ATAGS && UNUSED_BOARD_FILES
-	help
-	  Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform .
-
 config DAVINCI_MUX
 	bool "DAVINCI multiplexing support"
 	depends on ARCH_DAVINCI
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 3f4894aa7528..5b15a3bbf909 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -10,20 +10,11 @@ obj-y 					:= serial.o usb.o common.o sram.o
 obj-$(CONFIG_DAVINCI_MUX)		+= mux.o
 
 # Chip specific
-obj-$(CONFIG_ARCH_DAVINCI_DM355)        += dm355.o devices.o
-obj-$(CONFIG_ARCH_DAVINCI_DM365)	+= dm365.o devices.o
 obj-$(CONFIG_ARCH_DAVINCI_DA830)	+= da830.o devices-da8xx.o usb-da8xx.o
 obj-$(CONFIG_ARCH_DAVINCI_DA850)	+= da850.o devices-da8xx.o usb-da8xx.o
 
 # Board specific
 obj-$(CONFIG_MACH_DA8XX_DT)		+= da8xx-dt.o pdata-quirks.o
-obj-$(CONFIG_MACH_DAVINCI_DM355_EVM)	+= board-dm355-evm.o
-obj-$(CONFIG_MACH_DM355_LEOPARD)	+= board-dm355-leopard.o
-obj-$(CONFIG_MACH_DAVINCI_DM365_EVM)	+= board-dm365-evm.o
-obj-$(CONFIG_MACH_DAVINCI_DA830_EVM)	+= board-da830-evm.o
-obj-$(CONFIG_MACH_DAVINCI_DA850_EVM)	+= board-da850-evm.o
-obj-$(CONFIG_MACH_MITYOMAPL138)		+= board-mityomapl138.o
-obj-$(CONFIG_MACH_OMAPL138_HAWKBOARD)	+= board-omapl138-hawk.o
 
 # Power Management
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
deleted file mode 100644
index 6299e5c8f4ea..000000000000
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ /dev/null
@@ -1,690 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * TI DA830/OMAP L137 EVM board
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- * Derived from: arch/arm/mach-davinci/board-dm644x-evm.c
- *
- * 2007, 2009 (c) MontaVista Software, Inc.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/pcf857x.h>
-#include <linux/property.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mtd-davinci-aemif.h>
-#include <linux/platform_data/spi-davinci.h>
-#include <linux/platform_data/usb-davinci.h>
-#include <linux/platform_data/ti-aemif.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/nvmem-provider.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "mux.h"
-#include "da8xx.h"
-#include "irqs.h"
-
-#define DA830_EVM_PHY_ID		""
-/*
- * USB1 VBUS is controlled by GPIO1[15], over-current is reported on GPIO2[4].
- */
-#define ON_BD_USB_DRV	GPIO_TO_PIN(1, 15)
-#define ON_BD_USB_OVC	GPIO_TO_PIN(2, 4)
-
-static const short da830_evm_usb11_pins[] = {
-	DA830_GPIO1_15, DA830_GPIO2_4,
-	-1
-};
-
-static struct regulator_consumer_supply da830_evm_usb_supplies[] = {
-	REGULATOR_SUPPLY("vbus", NULL),
-};
-
-static struct regulator_init_data da830_evm_usb_vbus_data = {
-	.consumer_supplies	= da830_evm_usb_supplies,
-	.num_consumer_supplies	= ARRAY_SIZE(da830_evm_usb_supplies),
-	.constraints    = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct fixed_voltage_config da830_evm_usb_vbus = {
-	.supply_name		= "vbus",
-	.microvolts		= 33000000,
-	.init_data		= &da830_evm_usb_vbus_data,
-};
-
-static struct platform_device da830_evm_usb_vbus_device = {
-	.name		= "reg-fixed-voltage",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &da830_evm_usb_vbus,
-	},
-};
-
-static struct gpiod_lookup_table da830_evm_usb_oc_gpio_lookup = {
-	.dev_id		= "ohci-da8xx",
-	.table = {
-		GPIO_LOOKUP("davinci_gpio", ON_BD_USB_OVC, "oc", 0),
-		{ }
-	},
-};
-
-static struct gpiod_lookup_table da830_evm_usb_vbus_gpio_lookup = {
-	.dev_id		= "reg-fixed-voltage.0",
-	.table = {
-		GPIO_LOOKUP("davinci_gpio", ON_BD_USB_DRV, NULL, 0),
-		{ }
-	},
-};
-
-static struct gpiod_lookup_table *da830_evm_usb_gpio_lookups[] = {
-	&da830_evm_usb_oc_gpio_lookup,
-	&da830_evm_usb_vbus_gpio_lookup,
-};
-
-static struct da8xx_ohci_root_hub da830_evm_usb11_pdata = {
-	/* TPS2065 switch @ 5V */
-	.potpgt		= (3 + 1) / 2,	/* 3 ms max */
-};
-
-static __init void da830_evm_usb_init(void)
-{
-	int ret;
-
-	ret = da8xx_register_usb_phy_clocks();
-	if (ret)
-		pr_warn("%s: USB PHY CLK registration failed: %d\n",
-			__func__, ret);
-
-	gpiod_add_lookup_tables(da830_evm_usb_gpio_lookups,
-				ARRAY_SIZE(da830_evm_usb_gpio_lookups));
-
-	ret = da8xx_register_usb_phy();
-	if (ret)
-		pr_warn("%s: USB PHY registration failed: %d\n",
-			__func__, ret);
-
-	ret = davinci_cfg_reg(DA830_USB0_DRVVBUS);
-	if (ret)
-		pr_warn("%s: USB 2.0 PinMux setup failed: %d\n", __func__, ret);
-	else {
-		/*
-		 * TPS2065 switch @ 5V supplies 1 A (sustains 1.5 A),
-		 * with the power on to power good time of 3 ms.
-		 */
-		ret = da8xx_register_usb20(1000, 3);
-		if (ret)
-			pr_warn("%s: USB 2.0 registration failed: %d\n",
-				__func__, ret);
-	}
-
-	ret = davinci_cfg_reg_list(da830_evm_usb11_pins);
-	if (ret) {
-		pr_warn("%s: USB 1.1 PinMux setup failed: %d\n", __func__, ret);
-		return;
-	}
-
-	ret = platform_device_register(&da830_evm_usb_vbus_device);
-	if (ret) {
-		pr_warn("%s: Unable to register the vbus supply\n", __func__);
-		return;
-	}
-
-	ret = da8xx_register_usb11(&da830_evm_usb11_pdata);
-	if (ret)
-		pr_warn("%s: USB 1.1 registration failed: %d\n", __func__, ret);
-}
-
-static const short da830_evm_mcasp1_pins[] = {
-	DA830_AHCLKX1, DA830_ACLKX1, DA830_AFSX1, DA830_AHCLKR1, DA830_AFSR1,
-	DA830_AMUTE1, DA830_AXR1_0, DA830_AXR1_1, DA830_AXR1_2, DA830_AXR1_5,
-	DA830_ACLKR1, DA830_AXR1_6, DA830_AXR1_7, DA830_AXR1_8, DA830_AXR1_10,
-	DA830_AXR1_11,
-	-1
-};
-
-static u8 da830_iis_serializer_direction[] = {
-	RX_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
-	INACTIVE_MODE,	TX_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
-	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
-};
-
-static struct snd_platform_data da830_evm_snd_data = {
-	.tx_dma_offset  = 0x2000,
-	.rx_dma_offset  = 0x2000,
-	.op_mode        = DAVINCI_MCASP_IIS_MODE,
-	.num_serializer = ARRAY_SIZE(da830_iis_serializer_direction),
-	.tdm_slots      = 2,
-	.serial_dir     = da830_iis_serializer_direction,
-	.asp_chan_q     = EVENTQ_0,
-	.version	= MCASP_VERSION_2,
-	.txnumevt	= 1,
-	.rxnumevt	= 1,
-};
-
-/*
- * GPIO2[1] is used as MMC_SD_WP and GPIO2[2] as MMC_SD_INS.
- */
-static const short da830_evm_mmc_sd_pins[] = {
-	DA830_MMCSD_DAT_0, DA830_MMCSD_DAT_1, DA830_MMCSD_DAT_2,
-	DA830_MMCSD_DAT_3, DA830_MMCSD_DAT_4, DA830_MMCSD_DAT_5,
-	DA830_MMCSD_DAT_6, DA830_MMCSD_DAT_7, DA830_MMCSD_CLK,
-	DA830_MMCSD_CMD,   DA830_GPIO2_1,     DA830_GPIO2_2,
-	-1
-};
-
-#define DA830_MMCSD_WP_PIN		GPIO_TO_PIN(2, 1)
-#define DA830_MMCSD_CD_PIN		GPIO_TO_PIN(2, 2)
-
-static struct gpiod_lookup_table mmc_gpios_table = {
-	.dev_id = "da830-mmc.0",
-	.table = {
-		/* gpio chip 1 contains gpio range 32-63 */
-		GPIO_LOOKUP("davinci_gpio", DA830_MMCSD_CD_PIN, "cd",
-			    GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("davinci_gpio", DA830_MMCSD_WP_PIN, "wp",
-			    GPIO_ACTIVE_LOW),
-		{ }
-	},
-};
-
-static struct davinci_mmc_config da830_evm_mmc_config = {
-	.wires			= 8,
-	.max_freq		= 50000000,
-	.caps			= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-};
-
-static inline void da830_evm_init_mmc(void)
-{
-	int ret;
-
-	ret = davinci_cfg_reg_list(da830_evm_mmc_sd_pins);
-	if (ret) {
-		pr_warn("%s: mmc/sd mux setup failed: %d\n", __func__, ret);
-		return;
-	}
-
-	gpiod_add_lookup_table(&mmc_gpios_table);
-
-	ret = da8xx_register_mmcsd0(&da830_evm_mmc_config);
-	if (ret) {
-		pr_warn("%s: mmc/sd registration failed: %d\n", __func__, ret);
-		gpiod_remove_lookup_table(&mmc_gpios_table);
-	}
-}
-
-#define HAS_MMC		IS_ENABLED(CONFIG_MMC_DAVINCI)
-
-#ifdef CONFIG_DA830_UI_NAND
-static struct mtd_partition da830_evm_nand_partitions[] = {
-	/* bootloader (U-Boot, etc) in first sector */
-	[0] = {
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	/* bootloader params in the next sector */
-	[1] = {
-		.name		= "params",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	/* kernel */
-	[2] = {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_2M,
-		.mask_flags	= 0,
-	},
-	/* file system */
-	[3] = {
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	}
-};
-
-/* flash bbt descriptors */
-static uint8_t da830_evm_nand_bbt_pattern[] = { 'B', 'b', 't', '0' };
-static uint8_t da830_evm_nand_mirror_pattern[] = { '1', 't', 'b', 'B' };
-
-static struct nand_bbt_descr da830_evm_nand_bbt_main_descr = {
-	.options	= NAND_BBT_LASTBLOCK | NAND_BBT_CREATE |
-			  NAND_BBT_WRITE | NAND_BBT_2BIT |
-			  NAND_BBT_VERSION | NAND_BBT_PERCHIP,
-	.offs		= 2,
-	.len		= 4,
-	.veroffs	= 16,
-	.maxblocks	= 4,
-	.pattern	= da830_evm_nand_bbt_pattern
-};
-
-static struct nand_bbt_descr da830_evm_nand_bbt_mirror_descr = {
-	.options	= NAND_BBT_LASTBLOCK | NAND_BBT_CREATE |
-			  NAND_BBT_WRITE | NAND_BBT_2BIT |
-			  NAND_BBT_VERSION | NAND_BBT_PERCHIP,
-	.offs		= 2,
-	.len		= 4,
-	.veroffs	= 16,
-	.maxblocks	= 4,
-	.pattern	= da830_evm_nand_mirror_pattern
-};
-
-static struct davinci_aemif_timing da830_evm_nandflash_timing = {
-	.wsetup         = 24,
-	.wstrobe        = 21,
-	.whold          = 14,
-	.rsetup         = 19,
-	.rstrobe        = 50,
-	.rhold          = 0,
-	.ta             = 20,
-};
-
-static struct davinci_nand_pdata da830_evm_nand_pdata = {
-	.core_chipsel	= 1,
-	.parts		= da830_evm_nand_partitions,
-	.nr_parts	= ARRAY_SIZE(da830_evm_nand_partitions),
-	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
-	.ecc_bits	= 4,
-	.bbt_options	= NAND_BBT_USE_FLASH,
-	.bbt_td		= &da830_evm_nand_bbt_main_descr,
-	.bbt_md		= &da830_evm_nand_bbt_mirror_descr,
-	.timing         = &da830_evm_nandflash_timing,
-};
-
-static struct resource da830_evm_nand_resources[] = {
-	[0] = {		/* First memory resource is NAND I/O window */
-		.start	= DA8XX_AEMIF_CS3_BASE,
-		.end	= DA8XX_AEMIF_CS3_BASE + PAGE_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {		/* Second memory resource is AEMIF control registers */
-		.start	= DA8XX_AEMIF_CTL_BASE,
-		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device da830_evm_aemif_devices[] = {
-	{
-		.name		= "davinci_nand",
-		.id		= 1,
-		.dev		= {
-			.platform_data	= &da830_evm_nand_pdata,
-		},
-		.num_resources	= ARRAY_SIZE(da830_evm_nand_resources),
-		.resource	= da830_evm_nand_resources,
-	},
-};
-
-static struct resource da830_evm_aemif_resource[] = {
-	{
-		.start	= DA8XX_AEMIF_CTL_BASE,
-		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct aemif_abus_data da830_evm_aemif_abus_data[] = {
-	{
-		.cs	= 3,
-	},
-};
-
-static struct aemif_platform_data da830_evm_aemif_pdata = {
-	.abus_data		= da830_evm_aemif_abus_data,
-	.num_abus_data		= ARRAY_SIZE(da830_evm_aemif_abus_data),
-	.sub_devices		= da830_evm_aemif_devices,
-	.num_sub_devices	= ARRAY_SIZE(da830_evm_aemif_devices),
-	.cs_offset		= 2,
-};
-
-static struct platform_device da830_evm_aemif_device = {
-	.name		= "ti-aemif",
-	.id		= -1,
-	.dev = {
-		.platform_data = &da830_evm_aemif_pdata,
-	},
-	.resource	= da830_evm_aemif_resource,
-	.num_resources	= ARRAY_SIZE(da830_evm_aemif_resource),
-};
-
-/*
- * UI board NAND/NOR flashes only use 8-bit data bus.
- */
-static const short da830_evm_emif25_pins[] = {
-	DA830_EMA_D_0, DA830_EMA_D_1, DA830_EMA_D_2, DA830_EMA_D_3,
-	DA830_EMA_D_4, DA830_EMA_D_5, DA830_EMA_D_6, DA830_EMA_D_7,
-	DA830_EMA_A_0, DA830_EMA_A_1, DA830_EMA_A_2, DA830_EMA_A_3,
-	DA830_EMA_A_4, DA830_EMA_A_5, DA830_EMA_A_6, DA830_EMA_A_7,
-	DA830_EMA_A_8, DA830_EMA_A_9, DA830_EMA_A_10, DA830_EMA_A_11,
-	DA830_EMA_A_12, DA830_EMA_BA_0, DA830_EMA_BA_1, DA830_NEMA_WE,
-	DA830_NEMA_CS_2, DA830_NEMA_CS_3, DA830_NEMA_OE, DA830_EMA_WAIT_0,
-	-1
-};
-
-static inline void da830_evm_init_nand(int mux_mode)
-{
-	int ret;
-
-	if (HAS_MMC) {
-		pr_warn("WARNING: both MMC/SD and NAND are enabled, but they share AEMIF pins\n"
-			"\tDisable MMC/SD for NAND support\n");
-		return;
-	}
-
-	ret = davinci_cfg_reg_list(da830_evm_emif25_pins);
-	if (ret)
-		pr_warn("%s: emif25 mux setup failed: %d\n", __func__, ret);
-
-	ret = platform_device_register(&da830_evm_aemif_device);
-	if (ret)
-		pr_warn("%s: AEMIF device not registered\n", __func__);
-
-	gpio_direction_output(mux_mode, 1);
-}
-#else
-static inline void da830_evm_init_nand(int mux_mode) { }
-#endif
-
-#ifdef CONFIG_DA830_UI_LCD
-static inline void da830_evm_init_lcdc(int mux_mode)
-{
-	int ret;
-
-	ret = davinci_cfg_reg_list(da830_lcdcntl_pins);
-	if (ret)
-		pr_warn("%s: lcdcntl mux setup failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_lcdc(&sharp_lcd035q3dg01_pdata);
-	if (ret)
-		pr_warn("%s: lcd setup failed: %d\n", __func__, ret);
-
-	gpio_direction_output(mux_mode, 0);
-}
-#else
-static inline void da830_evm_init_lcdc(int mux_mode) { }
-#endif
-
-static struct nvmem_cell_info da830_evm_nvmem_cells[] = {
-	{
-		.name		= "macaddr",
-		.offset		= 0x7f00,
-		.bytes		= ETH_ALEN,
-	}
-};
-
-static struct nvmem_cell_table da830_evm_nvmem_cell_table = {
-	.nvmem_name	= "1-00500",
-	.cells		= da830_evm_nvmem_cells,
-	.ncells		= ARRAY_SIZE(da830_evm_nvmem_cells),
-};
-
-static struct nvmem_cell_lookup da830_evm_nvmem_cell_lookup = {
-	.nvmem_name	= "1-00500",
-	.cell_name	= "macaddr",
-	.dev_id		= "davinci_emac.1",
-	.con_id		= "mac-address",
-};
-
-static const struct property_entry da830_evm_i2c_eeprom_properties[] = {
-	PROPERTY_ENTRY_U32("pagesize", 64),
-	{ }
-};
-
-static const struct software_node da830_evm_i2c_eeprom_node = {
-	.properties = da830_evm_i2c_eeprom_properties,
-};
-
-static int __init da830_evm_ui_expander_setup(struct i2c_client *client,
-		int gpio, unsigned ngpio, void *context)
-{
-	gpio_request(gpio + 6, "UI MUX_MODE");
-
-	/* Drive mux mode low to match the default without UI card */
-	gpio_direction_output(gpio + 6, 0);
-
-	da830_evm_init_lcdc(gpio + 6);
-
-	da830_evm_init_nand(gpio + 6);
-
-	return 0;
-}
-
-static void da830_evm_ui_expander_teardown(struct i2c_client *client, int gpio,
-		unsigned ngpio, void *context)
-{
-	gpio_free(gpio + 6);
-}
-
-static struct pcf857x_platform_data __initdata da830_evm_ui_expander_info = {
-	.gpio_base	= DAVINCI_N_GPIO,
-	.setup		= da830_evm_ui_expander_setup,
-	.teardown	= da830_evm_ui_expander_teardown,
-};
-
-static struct i2c_board_info __initdata da830_evm_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("24c256", 0x50),
-		.swnode = &da830_evm_i2c_eeprom_node,
-	},
-	{
-		I2C_BOARD_INFO("tlv320aic3x", 0x18),
-	},
-	{
-		I2C_BOARD_INFO("pcf8574", 0x3f),
-		.platform_data	= &da830_evm_ui_expander_info,
-	},
-};
-
-static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata = {
-	.bus_freq	= 100,	/* kHz */
-	.bus_delay	= 0,	/* usec */
-};
-
-/*
- * The following EDMA channels/slots are not being used by drivers (for
- * example: Timer, GPIO, UART events etc) on da830/omap-l137 EVM, hence
- * they are being reserved for codecs on the DSP side.
- */
-static const s16 da830_dma_rsv_chans[][2] = {
-	/* (offset, number) */
-	{ 8,  2},
-	{12,  2},
-	{24,  4},
-	{30,  2},
-	{-1, -1}
-};
-
-static const s16 da830_dma_rsv_slots[][2] = {
-	/* (offset, number) */
-	{ 8,  2},
-	{12,  2},
-	{24,  4},
-	{30, 26},
-	{-1, -1}
-};
-
-static struct edma_rsv_info da830_edma_rsv[] = {
-	{
-		.rsv_chans	= da830_dma_rsv_chans,
-		.rsv_slots	= da830_dma_rsv_slots,
-	},
-};
-
-static struct mtd_partition da830evm_spiflash_part[] = {
-	[0] = {
-		.name = "DSP-UBL",
-		.offset = 0,
-		.size = SZ_8K,
-		.mask_flags = MTD_WRITEABLE,
-	},
-	[1] = {
-		.name = "ARM-UBL",
-		.offset = MTDPART_OFS_APPEND,
-		.size = SZ_16K + SZ_8K,
-		.mask_flags = MTD_WRITEABLE,
-	},
-	[2] = {
-		.name = "U-Boot",
-		.offset = MTDPART_OFS_APPEND,
-		.size = SZ_256K - SZ_32K,
-		.mask_flags = MTD_WRITEABLE,
-	},
-	[3] = {
-		.name = "U-Boot-Environment",
-		.offset = MTDPART_OFS_APPEND,
-		.size = SZ_16K,
-		.mask_flags = 0,
-	},
-	[4] = {
-		.name = "Kernel",
-		.offset = MTDPART_OFS_APPEND,
-		.size = MTDPART_SIZ_FULL,
-		.mask_flags = 0,
-	},
-};
-
-static struct flash_platform_data da830evm_spiflash_data = {
-	.name		= "m25p80",
-	.parts		= da830evm_spiflash_part,
-	.nr_parts	= ARRAY_SIZE(da830evm_spiflash_part),
-	.type		= "w25x32",
-};
-
-static struct davinci_spi_config da830evm_spiflash_cfg = {
-	.io_type	= SPI_IO_TYPE_DMA,
-	.c2tdelay	= 8,
-	.t2cdelay	= 8,
-};
-
-static struct spi_board_info da830evm_spi_info[] = {
-	{
-		.modalias		= "m25p80",
-		.platform_data		= &da830evm_spiflash_data,
-		.controller_data	= &da830evm_spiflash_cfg,
-		.mode			= SPI_MODE_0,
-		.max_speed_hz		= 30000000,
-		.bus_num		= 0,
-		.chip_select		= 0,
-	},
-};
-
-static __init void da830_evm_init(void)
-{
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	int ret;
-
-	da830_register_clocks();
-
-	ret = da830_register_gpio();
-	if (ret)
-		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
-
-	ret = da830_register_edma(da830_edma_rsv);
-	if (ret)
-		pr_warn("%s: edma registration failed: %d\n", __func__, ret);
-
-	ret = davinci_cfg_reg_list(da830_i2c0_pins);
-	if (ret)
-		pr_warn("%s: i2c0 mux setup failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_i2c(0, &da830_evm_i2c_0_pdata);
-	if (ret)
-		pr_warn("%s: i2c0 registration failed: %d\n", __func__, ret);
-
-	da830_evm_usb_init();
-
-	soc_info->emac_pdata->rmii_en = 1;
-	soc_info->emac_pdata->phy_id = DA830_EVM_PHY_ID;
-
-	ret = davinci_cfg_reg_list(da830_cpgmac_pins);
-	if (ret)
-		pr_warn("%s: cpgmac mux setup failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_emac();
-	if (ret)
-		pr_warn("%s: emac registration failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_watchdog();
-	if (ret)
-		pr_warn("%s: watchdog registration failed: %d\n",
-			__func__, ret);
-
-	davinci_serial_init(da8xx_serial_device);
-
-	nvmem_add_cell_table(&da830_evm_nvmem_cell_table);
-	nvmem_add_cell_lookups(&da830_evm_nvmem_cell_lookup, 1);
-
-	i2c_register_board_info(1, da830_evm_i2c_devices,
-			ARRAY_SIZE(da830_evm_i2c_devices));
-
-	ret = davinci_cfg_reg_list(da830_evm_mcasp1_pins);
-	if (ret)
-		pr_warn("%s: mcasp1 mux setup failed: %d\n", __func__, ret);
-
-	da8xx_register_mcasp(1, &da830_evm_snd_data);
-
-	da830_evm_init_mmc();
-
-	ret = da8xx_register_rtc();
-	if (ret)
-		pr_warn("%s: rtc setup failed: %d\n", __func__, ret);
-
-	ret = spi_register_board_info(da830evm_spi_info,
-				      ARRAY_SIZE(da830evm_spi_info));
-	if (ret)
-		pr_warn("%s: spi info registration failed: %d\n",
-			__func__, ret);
-
-	ret = da8xx_register_spi_bus(0, ARRAY_SIZE(da830evm_spi_info));
-	if (ret)
-		pr_warn("%s: spi 0 registration failed: %d\n", __func__, ret);
-
-	regulator_has_full_constraints();
-}
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-static int __init da830_evm_console_init(void)
-{
-	if (!machine_is_davinci_da830_evm())
-		return 0;
-
-	return add_preferred_console("ttyS", 2, "115200");
-}
-console_initcall(da830_evm_console_init);
-#endif
-
-static void __init da830_evm_map_io(void)
-{
-	da830_init();
-}
-
-MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM")
-	.atag_offset	= 0x100,
-	.map_io		= da830_evm_map_io,
-	.init_irq	= da830_init_irq,
-	.init_time	= da830_init_time,
-	.init_machine	= da830_evm_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
deleted file mode 100644
index d752ee2b30ff..000000000000
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ /dev/null
@@ -1,1550 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * TI DA850/OMAP-L138 EVM board
- *
- * Copyright (C) 2009 Texas Instruments Incorporated - https://www.ti.com/
- *
- * Derived from: arch/arm/mach-davinci/board-da830-evm.c
- * Original Copyrights follow:
- *
- * 2007, 2009 (c) MontaVista Software, Inc.
- */
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/gpio/machine.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/leds.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/pca953x.h>
-#include <linux/input.h>
-#include <linux/input/tps6507x-ts.h>
-#include <linux/mfd/tps6507x.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/nvmem-provider.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mtd-davinci-aemif.h>
-#include <linux/platform_data/ti-aemif.h>
-#include <linux/platform_data/spi-davinci.h>
-#include <linux/platform_data/uio_pruss.h>
-#include <linux/property.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/tps6507x.h>
-#include <linux/regulator/fixed.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-
-#include "common.h"
-#include "da8xx.h"
-#include "mux.h"
-#include "irqs.h"
-#include "sram.h"
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/system_info.h>
-
-#include <media/i2c/tvp514x.h>
-#include <media/i2c/adv7343.h>
-
-#define DA850_EVM_PHY_ID		"davinci_mdio-0:00"
-#define DA850_LCD_PWR_PIN		GPIO_TO_PIN(2, 8)
-#define DA850_LCD_BL_PIN		GPIO_TO_PIN(2, 15)
-
-#define DA850_MII_MDIO_CLKEN_PIN	GPIO_TO_PIN(2, 6)
-
-static struct mtd_partition da850evm_spiflash_part[] = {
-	[0] = {
-		.name = "UBL",
-		.offset = 0,
-		.size = SZ_64K,
-		.mask_flags = MTD_WRITEABLE,
-	},
-	[1] = {
-		.name = "U-Boot",
-		.offset = MTDPART_OFS_APPEND,
-		.size = SZ_512K,
-		.mask_flags = MTD_WRITEABLE,
-	},
-	[2] = {
-		.name = "U-Boot-Env",
-		.offset = MTDPART_OFS_APPEND,
-		.size = SZ_64K,
-		.mask_flags = MTD_WRITEABLE,
-	},
-	[3] = {
-		.name = "Kernel",
-		.offset = MTDPART_OFS_APPEND,
-		.size = SZ_2M + SZ_512K,
-		.mask_flags = 0,
-	},
-	[4] = {
-		.name = "Filesystem",
-		.offset = MTDPART_OFS_APPEND,
-		.size = SZ_4M,
-		.mask_flags = 0,
-	},
-	[5] = {
-		.name = "MAC-Address",
-		.offset = SZ_8M - SZ_64K,
-		.size = SZ_64K,
-		.mask_flags = MTD_WRITEABLE,
-	},
-};
-
-static struct nvmem_cell_info da850evm_nvmem_cells[] = {
-	{
-		.name		= "macaddr",
-		.offset		= 0x0,
-		.bytes		= ETH_ALEN,
-	}
-};
-
-static struct nvmem_cell_table da850evm_nvmem_cell_table = {
-	/*
-	 * The nvmem name differs from the partition name because of the
-	 * internal works of the nvmem framework.
-	 */
-	.nvmem_name	= "MAC-Address0",
-	.cells		= da850evm_nvmem_cells,
-	.ncells		= ARRAY_SIZE(da850evm_nvmem_cells),
-};
-
-static struct nvmem_cell_lookup da850evm_nvmem_cell_lookup = {
-	.nvmem_name	= "MAC-Address0",
-	.cell_name	= "macaddr",
-	.dev_id		= "davinci_emac.1",
-	.con_id		= "mac-address",
-};
-
-static struct flash_platform_data da850evm_spiflash_data = {
-	.name		= "m25p80",
-	.parts		= da850evm_spiflash_part,
-	.nr_parts	= ARRAY_SIZE(da850evm_spiflash_part),
-	.type		= "m25p64",
-};
-
-static struct davinci_spi_config da850evm_spiflash_cfg = {
-	.io_type	= SPI_IO_TYPE_DMA,
-	.c2tdelay	= 8,
-	.t2cdelay	= 8,
-};
-
-static struct spi_board_info da850evm_spi_info[] = {
-	{
-		.modalias		= "m25p80",
-		.platform_data		= &da850evm_spiflash_data,
-		.controller_data	= &da850evm_spiflash_cfg,
-		.mode			= SPI_MODE_0,
-		.max_speed_hz		= 30000000,
-		.bus_num		= 1,
-		.chip_select		= 0,
-	},
-};
-
-static struct mtd_partition da850_evm_norflash_partition[] = {
-	{
-		.name           = "bootloaders + env",
-		.offset         = 0,
-		.size           = SZ_512K,
-		.mask_flags     = MTD_WRITEABLE,
-	},
-	{
-		.name           = "kernel",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = SZ_2M,
-		.mask_flags     = 0,
-	},
-	{
-		.name           = "filesystem",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = MTDPART_SIZ_FULL,
-		.mask_flags     = 0,
-	},
-};
-
-static struct physmap_flash_data da850_evm_norflash_data = {
-	.width		= 2,
-	.parts		= da850_evm_norflash_partition,
-	.nr_parts	= ARRAY_SIZE(da850_evm_norflash_partition),
-};
-
-static struct resource da850_evm_norflash_resource[] = {
-	{
-		.start	= DA8XX_AEMIF_CS2_BASE,
-		.end	= DA8XX_AEMIF_CS2_BASE + SZ_32M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-/* DA850/OMAP-L138 EVM includes a 512 MByte large-page NAND flash
- * (128K blocks). It may be used instead of the (default) SPI flash
- * to boot, using TI's tools to install the secondary boot loader
- * (UBL) and U-Boot.
- */
-static struct mtd_partition da850_evm_nandflash_partition[] = {
-	{
-		.name		= "u-boot env",
-		.offset		= 0,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,
-	 },
-	{
-		.name		= "UBL",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "u-boot",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 4 * SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "kernel",
-		.offset		= 0x200000,
-		.size		= SZ_2M,
-		.mask_flags	= 0,
-	},
-	{
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	},
-};
-
-static struct davinci_aemif_timing da850_evm_nandflash_timing = {
-	.wsetup		= 24,
-	.wstrobe	= 21,
-	.whold		= 14,
-	.rsetup		= 19,
-	.rstrobe	= 50,
-	.rhold		= 0,
-	.ta		= 20,
-};
-
-static struct davinci_nand_pdata da850_evm_nandflash_data = {
-	.core_chipsel	= 1,
-	.parts		= da850_evm_nandflash_partition,
-	.nr_parts	= ARRAY_SIZE(da850_evm_nandflash_partition),
-	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
-	.ecc_bits	= 4,
-	.bbt_options	= NAND_BBT_USE_FLASH,
-	.timing		= &da850_evm_nandflash_timing,
-};
-
-static struct resource da850_evm_nandflash_resource[] = {
-	{
-		.start	= DA8XX_AEMIF_CS3_BASE,
-		.end	= DA8XX_AEMIF_CS3_BASE + SZ_512K + 2 * SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DA8XX_AEMIF_CTL_BASE,
-		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct resource da850_evm_aemif_resource[] = {
-	{
-		.start	= DA8XX_AEMIF_CTL_BASE,
-		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct aemif_abus_data da850_evm_aemif_abus_data[] = {
-	{
-		.cs	= 3,
-	}
-};
-
-static struct platform_device da850_evm_aemif_devices[] = {
-	{
-		.name		= "davinci_nand",
-		.id		= 1,
-		.dev		= {
-			.platform_data	= &da850_evm_nandflash_data,
-		},
-		.num_resources	= ARRAY_SIZE(da850_evm_nandflash_resource),
-		.resource	= da850_evm_nandflash_resource,
-	},
-	{
-		.name		= "physmap-flash",
-		.id		= 0,
-		.dev		= {
-			.platform_data  = &da850_evm_norflash_data,
-		},
-		.num_resources	= 1,
-		.resource	= da850_evm_norflash_resource,
-	}
-};
-
-static struct aemif_platform_data da850_evm_aemif_pdata = {
-	.cs_offset = 2,
-	.abus_data = da850_evm_aemif_abus_data,
-	.num_abus_data = ARRAY_SIZE(da850_evm_aemif_abus_data),
-	.sub_devices = da850_evm_aemif_devices,
-	.num_sub_devices = ARRAY_SIZE(da850_evm_aemif_devices),
-};
-
-static struct platform_device da850_evm_aemif_device = {
-	.name		= "ti-aemif",
-	.id		= -1,
-	.dev = {
-		.platform_data	= &da850_evm_aemif_pdata,
-	},
-	.resource	= da850_evm_aemif_resource,
-	.num_resources	= ARRAY_SIZE(da850_evm_aemif_resource),
-};
-
-static const short da850_evm_nand_pins[] = {
-	DA850_EMA_D_0, DA850_EMA_D_1, DA850_EMA_D_2, DA850_EMA_D_3,
-	DA850_EMA_D_4, DA850_EMA_D_5, DA850_EMA_D_6, DA850_EMA_D_7,
-	DA850_EMA_A_1, DA850_EMA_A_2, DA850_NEMA_CS_3, DA850_NEMA_CS_4,
-	DA850_NEMA_WE, DA850_NEMA_OE,
-	-1
-};
-
-static const short da850_evm_nor_pins[] = {
-	DA850_EMA_BA_1, DA850_EMA_CLK, DA850_EMA_WAIT_1, DA850_NEMA_CS_2,
-	DA850_NEMA_WE, DA850_NEMA_OE, DA850_EMA_D_0, DA850_EMA_D_1,
-	DA850_EMA_D_2, DA850_EMA_D_3, DA850_EMA_D_4, DA850_EMA_D_5,
-	DA850_EMA_D_6, DA850_EMA_D_7, DA850_EMA_D_8, DA850_EMA_D_9,
-	DA850_EMA_D_10, DA850_EMA_D_11, DA850_EMA_D_12, DA850_EMA_D_13,
-	DA850_EMA_D_14, DA850_EMA_D_15, DA850_EMA_A_0, DA850_EMA_A_1,
-	DA850_EMA_A_2, DA850_EMA_A_3, DA850_EMA_A_4, DA850_EMA_A_5,
-	DA850_EMA_A_6, DA850_EMA_A_7, DA850_EMA_A_8, DA850_EMA_A_9,
-	DA850_EMA_A_10, DA850_EMA_A_11, DA850_EMA_A_12, DA850_EMA_A_13,
-	DA850_EMA_A_14, DA850_EMA_A_15, DA850_EMA_A_16, DA850_EMA_A_17,
-	DA850_EMA_A_18, DA850_EMA_A_19, DA850_EMA_A_20, DA850_EMA_A_21,
-	DA850_EMA_A_22, DA850_EMA_A_23,
-	-1
-};
-
-#define HAS_MMC		IS_ENABLED(CONFIG_MMC_DAVINCI)
-
-static inline void da850_evm_setup_nor_nand(void)
-{
-	int ret = 0;
-
-	if (!HAS_MMC) {
-		ret = davinci_cfg_reg_list(da850_evm_nand_pins);
-		if (ret)
-			pr_warn("%s: NAND mux setup failed: %d\n",
-				__func__, ret);
-
-		ret = davinci_cfg_reg_list(da850_evm_nor_pins);
-		if (ret)
-			pr_warn("%s: NOR mux setup failed: %d\n",
-				__func__, ret);
-
-		ret = platform_device_register(&da850_evm_aemif_device);
-		if (ret)
-			pr_warn("%s: registering aemif failed: %d\n",
-				__func__, ret);
-	}
-}
-
-#ifdef CONFIG_DA850_UI_RMII
-static inline void da850_evm_setup_emac_rmii(int rmii_sel)
-{
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	soc_info->emac_pdata->rmii_en = 1;
-	gpio_set_value_cansleep(rmii_sel, 0);
-}
-#else
-static inline void da850_evm_setup_emac_rmii(int rmii_sel) { }
-#endif
-
-
-#define DA850_KEYS_DEBOUNCE_MS	10
-/*
- * At 200ms polling interval it is possible to miss an
- * event by tapping very lightly on the push button but most
- * pushes do result in an event; longer intervals require the
- * user to hold the button whereas shorter intervals require
- * more CPU time for polling.
- */
-#define DA850_GPIO_KEYS_POLL_MS	200
-
-enum da850_evm_ui_exp_pins {
-	DA850_EVM_UI_EXP_SEL_C = 5,
-	DA850_EVM_UI_EXP_SEL_B,
-	DA850_EVM_UI_EXP_SEL_A,
-	DA850_EVM_UI_EXP_PB8,
-	DA850_EVM_UI_EXP_PB7,
-	DA850_EVM_UI_EXP_PB6,
-	DA850_EVM_UI_EXP_PB5,
-	DA850_EVM_UI_EXP_PB4,
-	DA850_EVM_UI_EXP_PB3,
-	DA850_EVM_UI_EXP_PB2,
-	DA850_EVM_UI_EXP_PB1,
-};
-
-static const char * const da850_evm_ui_exp[] = {
-	[DA850_EVM_UI_EXP_SEL_C]        = "sel_c",
-	[DA850_EVM_UI_EXP_SEL_B]        = "sel_b",
-	[DA850_EVM_UI_EXP_SEL_A]        = "sel_a",
-	[DA850_EVM_UI_EXP_PB8]          = "pb8",
-	[DA850_EVM_UI_EXP_PB7]          = "pb7",
-	[DA850_EVM_UI_EXP_PB6]          = "pb6",
-	[DA850_EVM_UI_EXP_PB5]          = "pb5",
-	[DA850_EVM_UI_EXP_PB4]          = "pb4",
-	[DA850_EVM_UI_EXP_PB3]          = "pb3",
-	[DA850_EVM_UI_EXP_PB2]          = "pb2",
-	[DA850_EVM_UI_EXP_PB1]          = "pb1",
-};
-
-#define DA850_N_UI_PB		8
-
-static struct gpio_keys_button da850_evm_ui_keys[] = {
-	[0 ... DA850_N_UI_PB - 1] = {
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.wakeup			= 0,
-		.debounce_interval	= DA850_KEYS_DEBOUNCE_MS,
-		.code			= -1, /* assigned at runtime */
-		.gpio			= -1, /* assigned at runtime */
-		.desc			= NULL, /* assigned at runtime */
-	},
-};
-
-static struct gpio_keys_platform_data da850_evm_ui_keys_pdata = {
-	.buttons = da850_evm_ui_keys,
-	.nbuttons = ARRAY_SIZE(da850_evm_ui_keys),
-	.poll_interval = DA850_GPIO_KEYS_POLL_MS,
-};
-
-static struct platform_device da850_evm_ui_keys_device = {
-	.name = "gpio-keys-polled",
-	.id = 0,
-	.dev = {
-		.platform_data = &da850_evm_ui_keys_pdata
-	},
-};
-
-static void da850_evm_ui_keys_init(unsigned gpio)
-{
-	int i;
-	struct gpio_keys_button *button;
-
-	for (i = 0; i < DA850_N_UI_PB; i++) {
-		button = &da850_evm_ui_keys[i];
-		button->code = KEY_F8 - i;
-		button->desc = da850_evm_ui_exp[DA850_EVM_UI_EXP_PB8 + i];
-		button->gpio = gpio + DA850_EVM_UI_EXP_PB8 + i;
-	}
-}
-
-#ifdef CONFIG_DA850_UI_SD_VIDEO_PORT
-static inline void da850_evm_setup_video_port(int video_sel)
-{
-	gpio_set_value_cansleep(video_sel, 0);
-}
-#else
-static inline void da850_evm_setup_video_port(int video_sel) { }
-#endif
-
-static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio,
-						unsigned ngpio, void *c)
-{
-	int sel_a, sel_b, sel_c, ret;
-
-	sel_a = gpio + DA850_EVM_UI_EXP_SEL_A;
-	sel_b = gpio + DA850_EVM_UI_EXP_SEL_B;
-	sel_c = gpio + DA850_EVM_UI_EXP_SEL_C;
-
-	ret = gpio_request(sel_a, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_A]);
-	if (ret) {
-		pr_warn("Cannot open UI expander pin %d\n", sel_a);
-		goto exp_setup_sela_fail;
-	}
-
-	ret = gpio_request(sel_b, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_B]);
-	if (ret) {
-		pr_warn("Cannot open UI expander pin %d\n", sel_b);
-		goto exp_setup_selb_fail;
-	}
-
-	ret = gpio_request(sel_c, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_C]);
-	if (ret) {
-		pr_warn("Cannot open UI expander pin %d\n", sel_c);
-		goto exp_setup_selc_fail;
-	}
-
-	/* deselect all functionalities */
-	gpio_direction_output(sel_a, 1);
-	gpio_direction_output(sel_b, 1);
-	gpio_direction_output(sel_c, 1);
-
-	da850_evm_ui_keys_init(gpio);
-	ret = platform_device_register(&da850_evm_ui_keys_device);
-	if (ret) {
-		pr_warn("Could not register UI GPIO expander push-buttons");
-		goto exp_setup_keys_fail;
-	}
-
-	pr_info("DA850/OMAP-L138 EVM UI card detected\n");
-
-	da850_evm_setup_nor_nand();
-
-	da850_evm_setup_emac_rmii(sel_a);
-
-	da850_evm_setup_video_port(sel_c);
-
-	return 0;
-
-exp_setup_keys_fail:
-	gpio_free(sel_c);
-exp_setup_selc_fail:
-	gpio_free(sel_b);
-exp_setup_selb_fail:
-	gpio_free(sel_a);
-exp_setup_sela_fail:
-	return ret;
-}
-
-static void da850_evm_ui_expander_teardown(struct i2c_client *client,
-					   unsigned gpio, unsigned ngpio, void *c)
-{
-	platform_device_unregister(&da850_evm_ui_keys_device);
-
-	/* deselect all functionalities */
-	gpio_set_value_cansleep(gpio + DA850_EVM_UI_EXP_SEL_C, 1);
-	gpio_set_value_cansleep(gpio + DA850_EVM_UI_EXP_SEL_B, 1);
-	gpio_set_value_cansleep(gpio + DA850_EVM_UI_EXP_SEL_A, 1);
-
-	gpio_free(gpio + DA850_EVM_UI_EXP_SEL_C);
-	gpio_free(gpio + DA850_EVM_UI_EXP_SEL_B);
-	gpio_free(gpio + DA850_EVM_UI_EXP_SEL_A);
-}
-
-/* assign the baseboard expander's GPIOs after the UI board's */
-#define DA850_UI_EXPANDER_N_GPIOS ARRAY_SIZE(da850_evm_ui_exp)
-#define DA850_BB_EXPANDER_GPIO_BASE (DAVINCI_N_GPIO + DA850_UI_EXPANDER_N_GPIOS)
-
-enum da850_evm_bb_exp_pins {
-	DA850_EVM_BB_EXP_DEEP_SLEEP_EN = 0,
-	DA850_EVM_BB_EXP_SW_RST,
-	DA850_EVM_BB_EXP_TP_23,
-	DA850_EVM_BB_EXP_TP_22,
-	DA850_EVM_BB_EXP_TP_21,
-	DA850_EVM_BB_EXP_USER_PB1,
-	DA850_EVM_BB_EXP_USER_LED2,
-	DA850_EVM_BB_EXP_USER_LED1,
-	DA850_EVM_BB_EXP_USER_SW1,
-	DA850_EVM_BB_EXP_USER_SW2,
-	DA850_EVM_BB_EXP_USER_SW3,
-	DA850_EVM_BB_EXP_USER_SW4,
-	DA850_EVM_BB_EXP_USER_SW5,
-	DA850_EVM_BB_EXP_USER_SW6,
-	DA850_EVM_BB_EXP_USER_SW7,
-	DA850_EVM_BB_EXP_USER_SW8
-};
-
-static const char * const da850_evm_bb_exp[] = {
-	[DA850_EVM_BB_EXP_DEEP_SLEEP_EN]	= "deep_sleep_en",
-	[DA850_EVM_BB_EXP_SW_RST]		= "sw_rst",
-	[DA850_EVM_BB_EXP_TP_23]		= "tp_23",
-	[DA850_EVM_BB_EXP_TP_22]		= "tp_22",
-	[DA850_EVM_BB_EXP_TP_21]		= "tp_21",
-	[DA850_EVM_BB_EXP_USER_PB1]		= "user_pb1",
-	[DA850_EVM_BB_EXP_USER_LED2]		= "user_led2",
-	[DA850_EVM_BB_EXP_USER_LED1]		= "user_led1",
-	[DA850_EVM_BB_EXP_USER_SW1]		= "user_sw1",
-	[DA850_EVM_BB_EXP_USER_SW2]		= "user_sw2",
-	[DA850_EVM_BB_EXP_USER_SW3]		= "user_sw3",
-	[DA850_EVM_BB_EXP_USER_SW4]		= "user_sw4",
-	[DA850_EVM_BB_EXP_USER_SW5]		= "user_sw5",
-	[DA850_EVM_BB_EXP_USER_SW6]		= "user_sw6",
-	[DA850_EVM_BB_EXP_USER_SW7]		= "user_sw7",
-	[DA850_EVM_BB_EXP_USER_SW8]		= "user_sw8",
-};
-
-#define DA850_N_BB_USER_SW	8
-
-static struct gpio_keys_button da850_evm_bb_keys[] = {
-	[0] = {
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.wakeup			= 0,
-		.debounce_interval	= DA850_KEYS_DEBOUNCE_MS,
-		.code			= KEY_PROG1,
-		.desc			= NULL, /* assigned at runtime */
-		.gpio			= -1, /* assigned at runtime */
-	},
-	[1 ... DA850_N_BB_USER_SW] = {
-		.type			= EV_SW,
-		.active_low		= 1,
-		.wakeup			= 0,
-		.debounce_interval	= DA850_KEYS_DEBOUNCE_MS,
-		.code			= -1, /* assigned at runtime */
-		.desc			= NULL, /* assigned at runtime */
-		.gpio			= -1, /* assigned at runtime */
-	},
-};
-
-static struct gpio_keys_platform_data da850_evm_bb_keys_pdata = {
-	.buttons = da850_evm_bb_keys,
-	.nbuttons = ARRAY_SIZE(da850_evm_bb_keys),
-	.poll_interval = DA850_GPIO_KEYS_POLL_MS,
-};
-
-static struct platform_device da850_evm_bb_keys_device = {
-	.name = "gpio-keys-polled",
-	.id = 1,
-	.dev = {
-		.platform_data = &da850_evm_bb_keys_pdata
-	},
-};
-
-static void da850_evm_bb_keys_init(unsigned gpio)
-{
-	int i;
-	struct gpio_keys_button *button;
-
-	button = &da850_evm_bb_keys[0];
-	button->desc = da850_evm_bb_exp[DA850_EVM_BB_EXP_USER_PB1];
-	button->gpio = gpio + DA850_EVM_BB_EXP_USER_PB1;
-
-	for (i = 0; i < DA850_N_BB_USER_SW; i++) {
-		button = &da850_evm_bb_keys[i + 1];
-		button->code = SW_LID + i;
-		button->desc = da850_evm_bb_exp[DA850_EVM_BB_EXP_USER_SW1 + i];
-		button->gpio = gpio + DA850_EVM_BB_EXP_USER_SW1 + i;
-	}
-}
-
-static struct gpio_led da850_evm_bb_leds[] = {
-	{
-		.name = "user_led2",
-	},
-	{
-		.name = "user_led1",
-	},
-};
-
-static struct gpio_led_platform_data da850_evm_bb_leds_pdata = {
-	.leds = da850_evm_bb_leds,
-	.num_leds = ARRAY_SIZE(da850_evm_bb_leds),
-};
-
-static struct gpiod_lookup_table da850_evm_bb_leds_gpio_table = {
-	.dev_id = "leds-gpio",
-	.table = {
-		GPIO_LOOKUP_IDX("i2c-bb-expander",
-				DA850_EVM_BB_EXP_USER_LED2, NULL,
-				0, GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP_IDX("i2c-bb-expander",
-				DA850_EVM_BB_EXP_USER_LED2 + 1, NULL,
-				1, GPIO_ACTIVE_LOW),
-
-		{ },
-	},
-};
-
-static struct platform_device da850_evm_bb_leds_device = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev = {
-		.platform_data = &da850_evm_bb_leds_pdata
-	}
-};
-
-static int da850_evm_bb_expander_setup(struct i2c_client *client,
-						unsigned gpio, unsigned ngpio,
-						void *c)
-{
-	int ret;
-
-	/*
-	 * Register the switches and pushbutton on the baseboard as a gpio-keys
-	 * device.
-	 */
-	da850_evm_bb_keys_init(gpio);
-	ret = platform_device_register(&da850_evm_bb_keys_device);
-	if (ret) {
-		pr_warn("Could not register baseboard GPIO expander keys");
-		goto io_exp_setup_sw_fail;
-	}
-
-	gpiod_add_lookup_table(&da850_evm_bb_leds_gpio_table);
-	ret = platform_device_register(&da850_evm_bb_leds_device);
-	if (ret) {
-		pr_warn("Could not register baseboard GPIO expander LEDs");
-		goto io_exp_setup_leds_fail;
-	}
-
-	return 0;
-
-io_exp_setup_leds_fail:
-	platform_device_unregister(&da850_evm_bb_keys_device);
-io_exp_setup_sw_fail:
-	return ret;
-}
-
-static void da850_evm_bb_expander_teardown(struct i2c_client *client,
-					   unsigned gpio, unsigned ngpio, void *c)
-{
-	platform_device_unregister(&da850_evm_bb_leds_device);
-	platform_device_unregister(&da850_evm_bb_keys_device);
-}
-
-static struct pca953x_platform_data da850_evm_ui_expander_info = {
-	.gpio_base	= DAVINCI_N_GPIO,
-	.setup		= da850_evm_ui_expander_setup,
-	.teardown	= da850_evm_ui_expander_teardown,
-	.names		= da850_evm_ui_exp,
-};
-
-static struct pca953x_platform_data da850_evm_bb_expander_info = {
-	.gpio_base	= DA850_BB_EXPANDER_GPIO_BASE,
-	.setup		= da850_evm_bb_expander_setup,
-	.teardown	= da850_evm_bb_expander_teardown,
-	.names		= da850_evm_bb_exp,
-};
-
-static struct i2c_board_info __initdata da850_evm_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("tlv320aic3x", 0x18),
-	},
-	{
-		I2C_BOARD_INFO("tca6416", 0x20),
-		.dev_name = "ui-expander",
-		.platform_data = &da850_evm_ui_expander_info,
-	},
-	{
-		I2C_BOARD_INFO("tca6416", 0x21),
-		.dev_name = "bb-expander",
-		.platform_data = &da850_evm_bb_expander_info,
-	},
-};
-
-static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
-	.bus_freq	= 100,	/* kHz */
-	.bus_delay	= 0,	/* usec */
-};
-
-/* davinci da850 evm audio machine driver */
-static u8 da850_iis_serializer_direction[] = {
-	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
-	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
-	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	TX_MODE,
-	RX_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
-};
-
-static struct snd_platform_data da850_evm_snd_data = {
-	.tx_dma_offset		= 0x2000,
-	.rx_dma_offset		= 0x2000,
-	.op_mode		= DAVINCI_MCASP_IIS_MODE,
-	.num_serializer		= ARRAY_SIZE(da850_iis_serializer_direction),
-	.tdm_slots		= 2,
-	.serial_dir		= da850_iis_serializer_direction,
-	.asp_chan_q		= EVENTQ_0,
-	.ram_chan_q		= EVENTQ_1,
-	.version		= MCASP_VERSION_2,
-	.txnumevt		= 1,
-	.rxnumevt		= 1,
-	.sram_size_playback	= SZ_8K,
-	.sram_size_capture	= SZ_8K,
-};
-
-static const short da850_evm_mcasp_pins[] __initconst = {
-	DA850_AHCLKX, DA850_ACLKX, DA850_AFSX,
-	DA850_AHCLKR, DA850_ACLKR, DA850_AFSR, DA850_AMUTE,
-	DA850_AXR_11, DA850_AXR_12,
-	-1
-};
-
-#define DA850_MMCSD_CD_PIN		GPIO_TO_PIN(4, 0)
-#define DA850_MMCSD_WP_PIN		GPIO_TO_PIN(4, 1)
-
-static struct gpiod_lookup_table mmc_gpios_table = {
-	.dev_id = "da830-mmc.0",
-	.table = {
-		/* gpio chip 2 contains gpio range 64-95 */
-		GPIO_LOOKUP("davinci_gpio", DA850_MMCSD_CD_PIN, "cd",
-			    GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("davinci_gpio", DA850_MMCSD_WP_PIN, "wp",
-			    GPIO_ACTIVE_HIGH),
-		{ }
-	},
-};
-
-static struct davinci_mmc_config da850_mmc_config = {
-	.wires		= 4,
-	.max_freq	= 50000000,
-	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-};
-
-static const short da850_evm_mmcsd0_pins[] __initconst = {
-	DA850_MMCSD0_DAT_0, DA850_MMCSD0_DAT_1, DA850_MMCSD0_DAT_2,
-	DA850_MMCSD0_DAT_3, DA850_MMCSD0_CLK, DA850_MMCSD0_CMD,
-	DA850_GPIO4_0, DA850_GPIO4_1,
-	-1
-};
-
-static struct property_entry da850_lcd_backlight_props[] = {
-	PROPERTY_ENTRY_BOOL("default-on"),
-	{ }
-};
-
-static struct gpiod_lookup_table da850_lcd_backlight_gpio_table = {
-	.dev_id		= "gpio-backlight",
-	.table = {
-		GPIO_LOOKUP("davinci_gpio", DA850_LCD_BL_PIN, NULL, 0),
-		{ }
-	},
-};
-
-static const struct platform_device_info da850_lcd_backlight_info = {
-	.name		= "gpio-backlight",
-	.id		= PLATFORM_DEVID_NONE,
-	.properties	= da850_lcd_backlight_props,
-};
-
-static struct regulator_consumer_supply da850_lcd_supplies[] = {
-	REGULATOR_SUPPLY("lcd", NULL),
-};
-
-static struct regulator_init_data da850_lcd_supply_data = {
-	.consumer_supplies	= da850_lcd_supplies,
-	.num_consumer_supplies	= ARRAY_SIZE(da850_lcd_supplies),
-	.constraints    = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct fixed_voltage_config da850_lcd_supply = {
-	.supply_name		= "lcd",
-	.microvolts		= 33000000,
-	.init_data		= &da850_lcd_supply_data,
-};
-
-static struct platform_device da850_lcd_supply_device = {
-	.name			= "reg-fixed-voltage",
-	.id			= 1, /* Dummy fixed regulator is 0 */
-	.dev			= {
-		.platform_data = &da850_lcd_supply,
-	},
-};
-
-static struct gpiod_lookup_table da850_lcd_supply_gpio_table = {
-	.dev_id			= "reg-fixed-voltage.1",
-	.table = {
-		GPIO_LOOKUP("davinci_gpio", DA850_LCD_PWR_PIN, NULL, 0),
-		{ }
-	},
-};
-
-static struct gpiod_lookup_table *da850_lcd_gpio_lookups[] = {
-	&da850_lcd_backlight_gpio_table,
-	&da850_lcd_supply_gpio_table,
-};
-
-static int da850_lcd_hw_init(void)
-{
-	struct platform_device *backlight;
-	int status;
-
-	gpiod_add_lookup_tables(da850_lcd_gpio_lookups,
-				ARRAY_SIZE(da850_lcd_gpio_lookups));
-
-	backlight = platform_device_register_full(&da850_lcd_backlight_info);
-	if (IS_ERR(backlight))
-		return PTR_ERR(backlight);
-
-	status = platform_device_register(&da850_lcd_supply_device);
-	if (status)
-		return status;
-
-	return 0;
-}
-
-/* Fixed regulator support */
-static struct regulator_consumer_supply fixed_supplies[] = {
-	/* Baseboard 3.3V: 5V -> TPS73701DCQ -> 3.3V */
-	REGULATOR_SUPPLY("AVDD", "1-0018"),
-	REGULATOR_SUPPLY("DRVDD", "1-0018"),
-
-	/* Baseboard 1.8V: 5V -> TPS73701DCQ -> 1.8V */
-	REGULATOR_SUPPLY("DVDD", "1-0018"),
-
-	/* UI card 3.3V: 5V -> TPS73701DCQ -> 3.3V */
-	REGULATOR_SUPPLY("vcc", "1-0020"),
-};
-
-/* TPS65070 voltage regulator support */
-
-/* 3.3V */
-static struct regulator_consumer_supply tps65070_dcdc1_consumers[] = {
-	{
-		.supply = "usb0_vdda33",
-	},
-	{
-		.supply = "usb1_vdda33",
-	},
-};
-
-/* 3.3V or 1.8V */
-static struct regulator_consumer_supply tps65070_dcdc2_consumers[] = {
-	{
-		.supply = "dvdd3318_a",
-	},
-	{
-		.supply = "dvdd3318_b",
-	},
-	{
-		.supply = "dvdd3318_c",
-	},
-	REGULATOR_SUPPLY("IOVDD", "1-0018"),
-};
-
-/* 1.2V */
-static struct regulator_consumer_supply tps65070_dcdc3_consumers[] = {
-	{
-		.supply = "cvdd",
-	},
-};
-
-/* 1.8V LDO */
-static struct regulator_consumer_supply tps65070_ldo1_consumers[] = {
-	{
-		.supply = "sata_vddr",
-	},
-	{
-		.supply = "usb0_vdda18",
-	},
-	{
-		.supply = "usb1_vdda18",
-	},
-	{
-		.supply = "ddr_dvdd18",
-	},
-};
-
-/* 1.2V LDO */
-static struct regulator_consumer_supply tps65070_ldo2_consumers[] = {
-	{
-		.supply = "sata_vdd",
-	},
-	{
-		.supply = "pll0_vdda",
-	},
-	{
-		.supply = "pll1_vdda",
-	},
-	{
-		.supply = "usbs_cvdd",
-	},
-	{
-		.supply = "vddarnwa1",
-	},
-};
-
-/* We take advantage of the fact that both defdcdc{2,3} are tied high */
-static struct tps6507x_reg_platform_data tps6507x_platform_data = {
-	.defdcdc_default = true,
-};
-
-static struct regulator_init_data tps65070_regulator_data[] = {
-	/* dcdc1 */
-	{
-		.constraints = {
-			.min_uV = 3150000,
-			.max_uV = 3450000,
-			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS),
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc1_consumers),
-		.consumer_supplies = tps65070_dcdc1_consumers,
-	},
-
-	/* dcdc2 */
-	{
-		.constraints = {
-			.min_uV = 1710000,
-			.max_uV = 3450000,
-			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS),
-			.boot_on = 1,
-			.always_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc2_consumers),
-		.consumer_supplies = tps65070_dcdc2_consumers,
-		.driver_data = &tps6507x_platform_data,
-	},
-
-	/* dcdc3 */
-	{
-		.constraints = {
-			.min_uV = 950000,
-			.max_uV = 1350000,
-			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS),
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc3_consumers),
-		.consumer_supplies = tps65070_dcdc3_consumers,
-		.driver_data = &tps6507x_platform_data,
-	},
-
-	/* ldo1 */
-	{
-		.constraints = {
-			.min_uV = 1710000,
-			.max_uV = 1890000,
-			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS),
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65070_ldo1_consumers),
-		.consumer_supplies = tps65070_ldo1_consumers,
-	},
-
-	/* ldo2 */
-	{
-		.constraints = {
-			.min_uV = 1140000,
-			.max_uV = 1320000,
-			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS),
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65070_ldo2_consumers),
-		.consumer_supplies = tps65070_ldo2_consumers,
-	},
-};
-
-static struct touchscreen_init_data tps6507x_touchscreen_data = {
-	.poll_period =  30,	/* ms between touch samples */
-	.min_pressure = 0x30,	/* minimum pressure to trigger touch */
-	.vendor = 0,		/* /sys/class/input/input?/id/vendor */
-	.product = 65070,	/* /sys/class/input/input?/id/product */
-	.version = 0x100,	/* /sys/class/input/input?/id/version */
-};
-
-static struct tps6507x_board tps_board = {
-	.tps6507x_pmic_init_data = &tps65070_regulator_data[0],
-	.tps6507x_ts_init_data = &tps6507x_touchscreen_data,
-};
-
-static struct i2c_board_info __initdata da850_evm_tps65070_info[] = {
-	{
-		I2C_BOARD_INFO("tps6507x", 0x48),
-		.platform_data = &tps_board,
-	},
-};
-
-static int __init pmic_tps65070_init(void)
-{
-	return i2c_register_board_info(1, da850_evm_tps65070_info,
-					ARRAY_SIZE(da850_evm_tps65070_info));
-}
-
-static const short da850_evm_lcdc_pins[] = {
-	DA850_GPIO2_8, DA850_GPIO2_15,
-	-1
-};
-
-static const short da850_evm_mii_pins[] = {
-	DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
-	DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
-	DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3,
-	DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK,
-	DA850_MDIO_D,
-	-1
-};
-
-static const short da850_evm_rmii_pins[] = {
-	DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN,
-	DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1,
-	DA850_RMII_RXER, DA850_RMII_MHZ_50_CLK, DA850_MDIO_CLK,
-	DA850_MDIO_D,
-	-1
-};
-
-static struct gpiod_hog da850_evm_emac_gpio_hogs[] = {
-	{
-		.chip_label	= "davinci_gpio",
-		.chip_hwnum	= DA850_MII_MDIO_CLKEN_PIN,
-		.line_name	= "mdio_clk_en",
-		.lflags		= 0,
-		/* dflags set in da850_evm_config_emac() */
-	},
-	{ }
-};
-
-static int __init da850_evm_config_emac(void)
-{
-	void __iomem *cfg_chip3_base;
-	int ret;
-	u32 val;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	u8 rmii_en;
-
-	if (!machine_is_davinci_da850_evm())
-		return 0;
-
-	rmii_en = soc_info->emac_pdata->rmii_en;
-
-	cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
-
-	val = __raw_readl(cfg_chip3_base);
-
-	if (rmii_en) {
-		val |= BIT(8);
-		ret = davinci_cfg_reg_list(da850_evm_rmii_pins);
-		pr_info("EMAC: RMII PHY configured, MII PHY will not be"
-							" functional\n");
-	} else {
-		val &= ~BIT(8);
-		ret = davinci_cfg_reg_list(da850_evm_mii_pins);
-		pr_info("EMAC: MII PHY configured, RMII PHY will not be"
-							" functional\n");
-	}
-
-	if (ret)
-		pr_warn("%s: CPGMAC/RMII mux setup failed: %d\n",
-			__func__, ret);
-
-	/* configure the CFGCHIP3 register for RMII or MII */
-	__raw_writel(val, cfg_chip3_base);
-
-	ret = davinci_cfg_reg(DA850_GPIO2_6);
-	if (ret)
-		pr_warn("%s:GPIO(2,6) mux setup failed\n", __func__);
-
-	da850_evm_emac_gpio_hogs[0].dflags = rmii_en ? GPIOD_OUT_HIGH
-						     : GPIOD_OUT_LOW;
-	gpiod_add_hogs(da850_evm_emac_gpio_hogs);
-
-	soc_info->emac_pdata->phy_id = DA850_EVM_PHY_ID;
-
-	ret = da8xx_register_emac();
-	if (ret)
-		pr_warn("%s: EMAC registration failed: %d\n", __func__, ret);
-
-	return 0;
-}
-device_initcall(da850_evm_config_emac);
-
-/*
- * The following EDMA channels/slots are not being used by drivers (for
- * example: Timer, GPIO, UART events etc) on da850/omap-l138 EVM, hence
- * they are being reserved for codecs on the DSP side.
- */
-static const s16 da850_dma0_rsv_chans[][2] = {
-	/* (offset, number) */
-	{ 8,  6},
-	{24,  4},
-	{30,  2},
-	{-1, -1}
-};
-
-static const s16 da850_dma0_rsv_slots[][2] = {
-	/* (offset, number) */
-	{ 8,  6},
-	{24,  4},
-	{30, 50},
-	{-1, -1}
-};
-
-static const s16 da850_dma1_rsv_chans[][2] = {
-	/* (offset, number) */
-	{ 0, 28},
-	{30,  2},
-	{-1, -1}
-};
-
-static const s16 da850_dma1_rsv_slots[][2] = {
-	/* (offset, number) */
-	{ 0, 28},
-	{30, 90},
-	{-1, -1}
-};
-
-static struct edma_rsv_info da850_edma_cc0_rsv = {
-	.rsv_chans	= da850_dma0_rsv_chans,
-	.rsv_slots	= da850_dma0_rsv_slots,
-};
-
-static struct edma_rsv_info da850_edma_cc1_rsv = {
-	.rsv_chans	= da850_dma1_rsv_chans,
-	.rsv_slots	= da850_dma1_rsv_slots,
-};
-
-static struct edma_rsv_info *da850_edma_rsv[2] = {
-	&da850_edma_cc0_rsv,
-	&da850_edma_cc1_rsv,
-};
-
-#ifdef CONFIG_CPU_FREQ
-static __init int da850_evm_init_cpufreq(void)
-{
-	switch (system_rev & 0xF) {
-	case 3:
-		da850_max_speed = 456000;
-		break;
-	case 2:
-		da850_max_speed = 408000;
-		break;
-	case 1:
-		da850_max_speed = 372000;
-		break;
-	}
-
-	return da850_register_cpufreq("pll0_sysclk3");
-}
-#else
-static __init int da850_evm_init_cpufreq(void) { return 0; }
-#endif
-
-#if defined(CONFIG_DA850_UI_SD_VIDEO_PORT)
-
-#define TVP5147_CH0		"tvp514x-0"
-#define TVP5147_CH1		"tvp514x-1"
-
-/* VPIF capture configuration */
-static struct tvp514x_platform_data tvp5146_pdata = {
-		.clk_polarity = 0,
-		.hs_polarity  = 1,
-		.vs_polarity  = 1,
-};
-
-#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
-
-static struct vpif_input da850_ch0_inputs[] = {
-	{
-		.input = {
-			.index = 0,
-			.name  = "Composite",
-			.type  = V4L2_INPUT_TYPE_CAMERA,
-			.capabilities = V4L2_IN_CAP_STD,
-			.std   = TVP514X_STD_ALL,
-		},
-		.input_route = INPUT_CVBS_VI2B,
-		.output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-		.subdev_name = TVP5147_CH0,
-	},
-};
-
-static struct vpif_input da850_ch1_inputs[] = {
-	{
-		.input = {
-			.index = 0,
-			.name  = "S-Video",
-			.type  = V4L2_INPUT_TYPE_CAMERA,
-			.capabilities = V4L2_IN_CAP_STD,
-			.std   = TVP514X_STD_ALL,
-		},
-		.input_route = INPUT_SVIDEO_VI2C_VI1C,
-		.output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-		.subdev_name = TVP5147_CH1,
-	},
-};
-
-static struct vpif_subdev_info da850_vpif_capture_sdev_info[] = {
-	{
-		.name = TVP5147_CH0,
-		.board_info = {
-			I2C_BOARD_INFO("tvp5146", 0x5d),
-			.platform_data = &tvp5146_pdata,
-		},
-	},
-	{
-		.name = TVP5147_CH1,
-		.board_info = {
-			I2C_BOARD_INFO("tvp5146", 0x5c),
-			.platform_data = &tvp5146_pdata,
-		},
-	},
-};
-
-static struct vpif_capture_config da850_vpif_capture_config = {
-	.subdev_info = da850_vpif_capture_sdev_info,
-	.subdev_count = ARRAY_SIZE(da850_vpif_capture_sdev_info),
-	.i2c_adapter_id = 1,
-	.chan_config[0] = {
-		.inputs = da850_ch0_inputs,
-		.input_count = ARRAY_SIZE(da850_ch0_inputs),
-		.vpif_if = {
-			.if_type = VPIF_IF_BT656,
-			.hd_pol  = 1,
-			.vd_pol  = 1,
-			.fid_pol = 0,
-		},
-	},
-	.chan_config[1] = {
-		.inputs = da850_ch1_inputs,
-		.input_count = ARRAY_SIZE(da850_ch1_inputs),
-		.vpif_if = {
-			.if_type = VPIF_IF_BT656,
-			.hd_pol  = 1,
-			.vd_pol  = 1,
-			.fid_pol = 0,
-		},
-	},
-	.card_name = "DA850/OMAP-L138 Video Capture",
-};
-
-/* VPIF display configuration */
-
-static struct adv7343_platform_data adv7343_pdata = {
-	.mode_config = {
-		.dac = { 1, 1, 1 },
-	},
-	.sd_config = {
-		.sd_dac_out = { 1 },
-	},
-};
-
-static struct vpif_subdev_info da850_vpif_subdev[] = {
-	{
-		.name = "adv7343",
-		.board_info = {
-			I2C_BOARD_INFO("adv7343", 0x2a),
-			.platform_data = &adv7343_pdata,
-		},
-	},
-};
-
-static const struct vpif_output da850_ch0_outputs[] = {
-	{
-		.output = {
-			.index = 0,
-			.name = "Composite",
-			.type = V4L2_OUTPUT_TYPE_ANALOG,
-			.capabilities = V4L2_OUT_CAP_STD,
-			.std = V4L2_STD_ALL,
-		},
-		.subdev_name = "adv7343",
-		.output_route = ADV7343_COMPOSITE_ID,
-	},
-	{
-		.output = {
-			.index = 1,
-			.name = "S-Video",
-			.type = V4L2_OUTPUT_TYPE_ANALOG,
-			.capabilities = V4L2_OUT_CAP_STD,
-			.std = V4L2_STD_ALL,
-		},
-		.subdev_name = "adv7343",
-		.output_route = ADV7343_SVIDEO_ID,
-	},
-};
-
-static struct vpif_display_config da850_vpif_display_config = {
-	.subdevinfo   = da850_vpif_subdev,
-	.subdev_count = ARRAY_SIZE(da850_vpif_subdev),
-	.chan_config[0] = {
-		.outputs = da850_ch0_outputs,
-		.output_count = ARRAY_SIZE(da850_ch0_outputs),
-	},
-	.card_name    = "DA850/OMAP-L138 Video Display",
-	.i2c_adapter_id = 1,
-};
-
-static __init void da850_vpif_init(void)
-{
-	int ret;
-
-	ret = da850_register_vpif();
-	if (ret)
-		pr_warn("da850_evm_init: VPIF setup failed: %d\n", ret);
-
-	ret = davinci_cfg_reg_list(da850_vpif_capture_pins);
-	if (ret)
-		pr_warn("da850_evm_init: VPIF capture mux setup failed: %d\n",
-			ret);
-
-	ret = da850_register_vpif_capture(&da850_vpif_capture_config);
-	if (ret)
-		pr_warn("da850_evm_init: VPIF capture setup failed: %d\n", ret);
-
-	ret = davinci_cfg_reg_list(da850_vpif_display_pins);
-	if (ret)
-		pr_warn("da850_evm_init: VPIF display mux setup failed: %d\n",
-			ret);
-
-	ret = da850_register_vpif_display(&da850_vpif_display_config);
-	if (ret)
-		pr_warn("da850_evm_init: VPIF display setup failed: %d\n", ret);
-}
-
-#else
-static __init void da850_vpif_init(void) {}
-#endif
-
-#define DA850EVM_SATA_REFCLKPN_RATE	(100 * 1000 * 1000)
-
-static __init void da850_evm_init(void)
-{
-	int ret;
-
-	da850_register_clocks();
-
-	ret = da850_register_gpio();
-	if (ret)
-		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
-
-	regulator_register_fixed(0, fixed_supplies, ARRAY_SIZE(fixed_supplies));
-
-	ret = pmic_tps65070_init();
-	if (ret)
-		pr_warn("%s: TPS65070 PMIC init failed: %d\n", __func__, ret);
-
-	ret = da850_register_edma(da850_edma_rsv);
-	if (ret)
-		pr_warn("%s: EDMA registration failed: %d\n", __func__, ret);
-
-	ret = davinci_cfg_reg_list(da850_i2c0_pins);
-	if (ret)
-		pr_warn("%s: I2C0 mux setup failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_i2c(0, &da850_evm_i2c_0_pdata);
-	if (ret)
-		pr_warn("%s: I2C0 registration failed: %d\n", __func__, ret);
-
-
-	ret = da8xx_register_watchdog();
-	if (ret)
-		pr_warn("%s: watchdog registration failed: %d\n",
-			__func__, ret);
-
-	if (HAS_MMC) {
-		ret = davinci_cfg_reg_list(da850_evm_mmcsd0_pins);
-		if (ret)
-			pr_warn("%s: MMCSD0 mux setup failed: %d\n",
-				__func__, ret);
-
-		gpiod_add_lookup_table(&mmc_gpios_table);
-
-		ret = da8xx_register_mmcsd0(&da850_mmc_config);
-		if (ret)
-			pr_warn("%s: MMCSD0 registration failed: %d\n",
-				__func__, ret);
-	}
-
-	davinci_serial_init(da8xx_serial_device);
-
-	nvmem_add_cell_table(&da850evm_nvmem_cell_table);
-	nvmem_add_cell_lookups(&da850evm_nvmem_cell_lookup, 1);
-
-	i2c_register_board_info(1, da850_evm_i2c_devices,
-			ARRAY_SIZE(da850_evm_i2c_devices));
-
-	/*
-	 * shut down uart 0 and 1; they are not used on the board and
-	 * accessing them causes endless "too much work in irq53" messages
-	 * with arago fs
-	 */
-	__raw_writel(0, IO_ADDRESS(DA8XX_UART1_BASE) + 0x30);
-	__raw_writel(0, IO_ADDRESS(DA8XX_UART0_BASE) + 0x30);
-
-	ret = davinci_cfg_reg_list(da850_evm_mcasp_pins);
-	if (ret)
-		pr_warn("%s: McASP mux setup failed: %d\n", __func__, ret);
-
-	da850_evm_snd_data.sram_pool = sram_get_gen_pool();
-	da8xx_register_mcasp(0, &da850_evm_snd_data);
-
-	ret = davinci_cfg_reg_list(da850_lcdcntl_pins);
-	if (ret)
-		pr_warn("%s: LCDC mux setup failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_uio_pruss();
-	if (ret)
-		pr_warn("da850_evm_init: pruss initialization failed: %d\n",
-				ret);
-
-	/* Handle board specific muxing for LCD here */
-	ret = davinci_cfg_reg_list(da850_evm_lcdc_pins);
-	if (ret)
-		pr_warn("%s: EVM specific LCD mux setup failed: %d\n",
-			__func__, ret);
-
-	ret = da850_lcd_hw_init();
-	if (ret)
-		pr_warn("%s: LCD initialization failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_lcdc(&sharp_lk043t1dg01_pdata);
-	if (ret)
-		pr_warn("%s: LCDC registration failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_rtc();
-	if (ret)
-		pr_warn("%s: RTC setup failed: %d\n", __func__, ret);
-
-	ret = da850_evm_init_cpufreq();
-	if (ret)
-		pr_warn("%s: cpufreq registration failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_cpuidle();
-	if (ret)
-		pr_warn("%s: cpuidle registration failed: %d\n", __func__, ret);
-
-	davinci_pm_init();
-	da850_vpif_init();
-
-	ret = spi_register_board_info(da850evm_spi_info,
-				      ARRAY_SIZE(da850evm_spi_info));
-	if (ret)
-		pr_warn("%s: spi info registration failed: %d\n", __func__,
-			ret);
-
-	ret = da8xx_register_spi_bus(1, ARRAY_SIZE(da850evm_spi_info));
-	if (ret)
-		pr_warn("%s: SPI 1 registration failed: %d\n", __func__, ret);
-
-	ret = da850_register_sata(DA850EVM_SATA_REFCLKPN_RATE);
-	if (ret)
-		pr_warn("%s: SATA registration failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_rproc();
-	if (ret)
-		pr_warn("%s: dsp/rproc registration failed: %d\n",
-			__func__, ret);
-
-	regulator_has_full_constraints();
-}
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-static int __init da850_evm_console_init(void)
-{
-	if (!machine_is_davinci_da850_evm())
-		return 0;
-
-	return add_preferred_console("ttyS", 2, "115200");
-}
-console_initcall(da850_evm_console_init);
-#endif
-
-static void __init da850_evm_map_io(void)
-{
-	da850_init();
-}
-
-MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM")
-	.atag_offset	= 0x100,
-	.map_io		= da850_evm_map_io,
-	.init_irq	= da850_init_irq,
-	.init_time	= da850_init_time,
-	.init_machine	= da850_evm_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-	.reserve	= da8xx_rproc_reserve_cma,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
deleted file mode 100644
index b48ab1c3e48b..000000000000
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ /dev/null
@@ -1,444 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * TI DaVinci EVM board support
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * 2007 (c) MontaVista Software, Inc.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/clk.h>
-#include <linux/dm9000.h>
-#include <linux/videodev2.h>
-#include <media/i2c/tvp514x.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/eeprom.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_data/i2c-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/usb-davinci.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "serial.h"
-#include "common.h"
-#include "davinci.h"
-
-/* NOTE:  this is geared for the standard config, with a socketed
- * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors.  If you
- * swap chips, maybe with a different block size, partitioning may
- * need to be changed.
- */
-#define NAND_BLOCK_SIZE		SZ_128K
-
-static struct mtd_partition davinci_nand_partitions[] = {
-	{
-		/* UBL (a few copies) plus U-Boot */
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= 15 * NAND_BLOCK_SIZE,
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	}, {
-		/* U-Boot environment */
-		.name		= "params",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 1 * NAND_BLOCK_SIZE,
-		.mask_flags	= 0,
-	}, {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_4M,
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem1",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_512M,
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem2",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	}
-	/* two blocks with bad block table (and mirror) at the end */
-};
-
-static struct davinci_nand_pdata davinci_nand_data = {
-	.core_chipsel		= 0,
-	.mask_chipsel		= BIT(14),
-	.parts			= davinci_nand_partitions,
-	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
-	.engine_type		= NAND_ECC_ENGINE_TYPE_ON_HOST,
-	.bbt_options		= NAND_BBT_USE_FLASH,
-	.ecc_bits		= 4,
-};
-
-static struct resource davinci_nand_resources[] = {
-	{
-		.start		= DM355_ASYNC_EMIF_DATA_CE0_BASE,
-		.end		= DM355_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= DM355_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DM355_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device davinci_nand_device = {
-	.name			= "davinci_nand",
-	.id			= 0,
-
-	.num_resources		= ARRAY_SIZE(davinci_nand_resources),
-	.resource		= davinci_nand_resources,
-
-	.dev			= {
-		.platform_data	= &davinci_nand_data,
-	},
-};
-
-#define DM355_I2C_SDA_PIN	GPIO_TO_PIN(0, 15)
-#define DM355_I2C_SCL_PIN	GPIO_TO_PIN(0, 14)
-
-static struct gpiod_lookup_table i2c_recovery_gpiod_table = {
-	.dev_id = "i2c_davinci.1",
-	.table = {
-		GPIO_LOOKUP("davinci_gpio", DM355_I2C_SDA_PIN, "sda",
-			    GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-		GPIO_LOOKUP("davinci_gpio", DM355_I2C_SCL_PIN, "scl",
-			    GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-		{ }
-	},
-};
-
-static struct davinci_i2c_platform_data i2c_pdata = {
-	.bus_freq	= 400	/* kHz */,
-	.bus_delay	= 0	/* usec */,
-	.gpio_recovery	= true,
-};
-
-static int dm355evm_mmc_gpios = -EINVAL;
-
-static void dm355evm_mmcsd_gpios(unsigned gpio)
-{
-	gpio_request(gpio + 0, "mmc0_ro");
-	gpio_request(gpio + 1, "mmc0_cd");
-	gpio_request(gpio + 2, "mmc1_ro");
-	gpio_request(gpio + 3, "mmc1_cd");
-
-	/* we "know" these are input-only so we don't
-	 * need to call gpio_direction_input()
-	 */
-
-	dm355evm_mmc_gpios = gpio;
-}
-
-static struct i2c_board_info dm355evm_i2c_info[] = {
-	{	I2C_BOARD_INFO("dm355evm_msp", 0x25),
-		.platform_data = dm355evm_mmcsd_gpios,
-	},
-	/* { plus irq  }, */
-	{ I2C_BOARD_INFO("tlv320aic33", 0x1b), },
-};
-
-static void __init evm_init_i2c(void)
-{
-	gpiod_add_lookup_table(&i2c_recovery_gpiod_table);
-	davinci_init_i2c(&i2c_pdata);
-
-	gpio_request(5, "dm355evm_msp");
-	gpio_direction_input(5);
-	dm355evm_i2c_info[0].irq = gpio_to_irq(5);
-
-	i2c_register_board_info(1, dm355evm_i2c_info,
-			ARRAY_SIZE(dm355evm_i2c_info));
-}
-
-static struct resource dm355evm_dm9000_rsrc[] = {
-	{
-		/* addr */
-		.start	= 0x04014000,
-		.end	= 0x04014001,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		/* data */
-		.start	= 0x04014002,
-		.end	= 0x04014003,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.flags	= IORESOURCE_IRQ
-			| IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */,
-	},
-};
-
-static struct dm9000_plat_data dm335evm_dm9000_platdata;
-
-static struct platform_device dm355evm_dm9000 = {
-	.name		= "dm9000",
-	.id		= -1,
-	.resource	= dm355evm_dm9000_rsrc,
-	.num_resources	= ARRAY_SIZE(dm355evm_dm9000_rsrc),
-	.dev		= {
-		.platform_data = &dm335evm_dm9000_platdata,
-	},
-};
-
-static struct tvp514x_platform_data tvp5146_pdata = {
-	.clk_polarity = 0,
-	.hs_polarity = 1,
-	.vs_polarity = 1
-};
-
-#define TVP514X_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
-/* Inputs available at the TVP5146 */
-static struct v4l2_input tvp5146_inputs[] = {
-	{
-		.index = 0,
-		.name = "Composite",
-		.type = V4L2_INPUT_TYPE_CAMERA,
-		.std = TVP514X_STD_ALL,
-	},
-	{
-		.index = 1,
-		.name = "S-Video",
-		.type = V4L2_INPUT_TYPE_CAMERA,
-		.std = TVP514X_STD_ALL,
-	},
-};
-
-/*
- * this is the route info for connecting each input to decoder
- * ouput that goes to vpfe. There is a one to one correspondence
- * with tvp5146_inputs
- */
-static struct vpfe_route tvp5146_routes[] = {
-	{
-		.input = INPUT_CVBS_VI2B,
-		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-	},
-	{
-		.input = INPUT_SVIDEO_VI2C_VI1C,
-		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-	},
-};
-
-static struct vpfe_subdev_info vpfe_sub_devs[] = {
-	{
-		.name = "tvp5146",
-		.grp_id = 0,
-		.num_inputs = ARRAY_SIZE(tvp5146_inputs),
-		.inputs = tvp5146_inputs,
-		.routes = tvp5146_routes,
-		.can_route = 1,
-		.ccdc_if_params = {
-			.if_type = VPFE_BT656,
-			.hdpol = VPFE_PINPOL_POSITIVE,
-			.vdpol = VPFE_PINPOL_POSITIVE,
-		},
-		.board_info = {
-			I2C_BOARD_INFO("tvp5146", 0x5d),
-			.platform_data = &tvp5146_pdata,
-		},
-	}
-};
-
-static struct vpfe_config vpfe_cfg = {
-	.num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
-	.i2c_adapter_id = 1,
-	.sub_devs = vpfe_sub_devs,
-	.card_name = "DM355 EVM",
-	.ccdc = "DM355 CCDC",
-};
-
-/* venc standards timings */
-static struct vpbe_enc_mode_info dm355evm_enc_preset_timing[] = {
-	{
-		.name		= "ntsc",
-		.timings_type	= VPBE_ENC_STD,
-		.std_id		= V4L2_STD_NTSC,
-		.interlaced	= 1,
-		.xres		= 720,
-		.yres		= 480,
-		.aspect		= {11, 10},
-		.fps		= {30000, 1001},
-		.left_margin	= 0x79,
-		.upper_margin	= 0x10,
-	},
-	{
-		.name		= "pal",
-		.timings_type	= VPBE_ENC_STD,
-		.std_id		= V4L2_STD_PAL,
-		.interlaced	= 1,
-		.xres		= 720,
-		.yres		= 576,
-		.aspect		= {54, 59},
-		.fps		= {25, 1},
-		.left_margin	= 0x7E,
-		.upper_margin	= 0x16
-	},
-};
-
-#define VENC_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
-
-/*
- * The outputs available from VPBE + ecnoders. Keep the
- * the order same as that of encoders. First those from venc followed by that
- * from encoders. Index in the output refers to index on a particular encoder.
- * Driver uses this index to pass it to encoder when it supports more than
- * one output. Application uses index of the array to set an output.
- */
-static struct vpbe_output dm355evm_vpbe_outputs[] = {
-	{
-		.output		= {
-			.index		= 0,
-			.name		= "Composite",
-			.type		= V4L2_OUTPUT_TYPE_ANALOG,
-			.std		= VENC_STD_ALL,
-			.capabilities	= V4L2_OUT_CAP_STD,
-		},
-		.subdev_name	= DM355_VPBE_VENC_SUBDEV_NAME,
-		.default_mode	= "ntsc",
-		.num_modes	= ARRAY_SIZE(dm355evm_enc_preset_timing),
-		.modes		= dm355evm_enc_preset_timing,
-		.if_params	= MEDIA_BUS_FMT_FIXED,
-	},
-};
-
-static struct vpbe_config dm355evm_display_cfg = {
-	.module_name	= "dm355-vpbe-display",
-	.i2c_adapter_id	= 1,
-	.osd		= {
-		.module_name	= DM355_VPBE_OSD_SUBDEV_NAME,
-	},
-	.venc		= {
-		.module_name	= DM355_VPBE_VENC_SUBDEV_NAME,
-	},
-	.num_outputs	= ARRAY_SIZE(dm355evm_vpbe_outputs),
-	.outputs	= dm355evm_vpbe_outputs,
-};
-
-static struct platform_device *davinci_evm_devices[] __initdata = {
-	&dm355evm_dm9000,
-	&davinci_nand_device,
-};
-
-static void __init dm355_evm_map_io(void)
-{
-	dm355_init();
-}
-
-static int dm355evm_mmc_get_cd(int module)
-{
-	if (!gpio_is_valid(dm355evm_mmc_gpios))
-		return -ENXIO;
-	/* low == card present */
-	return !gpio_get_value_cansleep(dm355evm_mmc_gpios + 2 * module + 1);
-}
-
-static int dm355evm_mmc_get_ro(int module)
-{
-	if (!gpio_is_valid(dm355evm_mmc_gpios))
-		return -ENXIO;
-	/* high == card's write protect switch active */
-	return gpio_get_value_cansleep(dm355evm_mmc_gpios + 2 * module + 0);
-}
-
-static struct davinci_mmc_config dm355evm_mmc_config = {
-	.get_cd		= dm355evm_mmc_get_cd,
-	.get_ro		= dm355evm_mmc_get_ro,
-	.wires		= 4,
-	.max_freq       = 50000000,
-	.caps           = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-};
-
-/* Don't connect anything to J10 unless you're only using USB host
- * mode *and* have to do so with some kind of gender-bender.  If
- * you have proper Mini-B or Mini-A cables (or Mini-A adapters)
- * the ID pin won't need any help.
- */
-#define USB_ID_VALUE	1	/* ID pulled low */
-
-static struct spi_eeprom at25640a = {
-	.byte_len	= SZ_64K / 8,
-	.name		= "at25640a",
-	.page_size	= 32,
-	.flags		= EE_ADDR2,
-};
-
-static const struct spi_board_info dm355_evm_spi_info[] __initconst = {
-	{
-		.modalias	= "at25",
-		.platform_data	= &at25640a,
-		.max_speed_hz	= 10 * 1000 * 1000,	/* at 3v3 */
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.mode		= SPI_MODE_0,
-	},
-};
-
-static __init void dm355_evm_init(void)
-{
-	struct clk *aemif;
-	int ret;
-
-	dm355_register_clocks();
-
-	ret = dm355_gpio_register();
-	if (ret)
-		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
-
-	gpio_request(1, "dm9000");
-	gpio_direction_input(1);
-	dm355evm_dm9000_rsrc[2].start = gpio_to_irq(1);
-
-	aemif = clk_get(&dm355evm_dm9000.dev, "aemif");
-	if (!WARN(IS_ERR(aemif), "unable to get AEMIF clock\n"))
-		clk_prepare_enable(aemif);
-
-	platform_add_devices(davinci_evm_devices,
-			     ARRAY_SIZE(davinci_evm_devices));
-	evm_init_i2c();
-	davinci_serial_init(dm355_serial_device);
-
-	/* NOTE:  NAND flash timings set by the UBL are slower than
-	 * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204
-	 * but could be 0x0400008c for about 25% faster page reads.
-	 */
-
-	gpio_request(2, "usb_id_toggle");
-	gpio_direction_output(2, USB_ID_VALUE);
-	/* irlml6401 switches over 1A in under 8 msec */
-	davinci_setup_usb(1000, 8);
-
-	davinci_setup_mmc(0, &dm355evm_mmc_config);
-	davinci_setup_mmc(1, &dm355evm_mmc_config);
-
-	dm355_init_video(&vpfe_cfg, &dm355evm_display_cfg);
-
-	dm355_init_spi0(BIT(0), dm355_evm_spi_info,
-			ARRAY_SIZE(dm355_evm_spi_info));
-
-	/* DM335 EVM uses ASP1; line-out is a stereo mini-jack */
-	dm355_init_asp1(ASP1_TX_EVT_EN | ASP1_RX_EVT_EN);
-}
-
-MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
-	.atag_offset  = 0x100,
-	.map_io	      = dm355_evm_map_io,
-	.init_irq     = dm355_init_irq,
-	.init_time	= dm355_init_time,
-	.init_machine = dm355_evm_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
deleted file mode 100644
index 32b9d607d025..000000000000
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ /dev/null
@@ -1,278 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * DM355 leopard board support
- *
- * Based on board-dm355-evm.c
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/clk.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/eeprom.h>
-#include <linux/platform_data/i2c-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/usb-davinci.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "serial.h"
-#include "davinci.h"
-
-/* NOTE:  this is geared for the standard config, with a socketed
- * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors.  If you
- * swap chips, maybe with a different block size, partitioning may
- * need to be changed.
- */
-#define NAND_BLOCK_SIZE		SZ_128K
-
-static struct mtd_partition davinci_nand_partitions[] = {
-	{
-		/* UBL (a few copies) plus U-Boot */
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= 15 * NAND_BLOCK_SIZE,
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	}, {
-		/* U-Boot environment */
-		.name		= "params",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 1 * NAND_BLOCK_SIZE,
-		.mask_flags	= 0,
-	}, {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_4M,
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem1",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_512M,
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem2",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	}
-	/* two blocks with bad block table (and mirror) at the end */
-};
-
-static struct davinci_nand_pdata davinci_nand_data = {
-	.core_chipsel		= 0,
-	.mask_chipsel		= BIT(14),
-	.parts			= davinci_nand_partitions,
-	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
-	.engine_type		= NAND_ECC_ENGINE_TYPE_ON_HOST,
-	.ecc_placement		= NAND_ECC_PLACEMENT_INTERLEAVED,
-	.ecc_bits		= 4,
-	.bbt_options		= NAND_BBT_USE_FLASH,
-};
-
-static struct resource davinci_nand_resources[] = {
-	{
-		.start		= DM355_ASYNC_EMIF_DATA_CE0_BASE,
-		.end		= DM355_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= DM355_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DM355_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device davinci_nand_device = {
-	.name			= "davinci_nand",
-	.id			= 0,
-
-	.num_resources		= ARRAY_SIZE(davinci_nand_resources),
-	.resource		= davinci_nand_resources,
-
-	.dev			= {
-		.platform_data	= &davinci_nand_data,
-	},
-};
-
-static struct davinci_i2c_platform_data i2c_pdata = {
-	.bus_freq	= 400	/* kHz */,
-	.bus_delay	= 0	/* usec */,
-};
-
-static int leopard_mmc_gpio = -EINVAL;
-
-static void dm355leopard_mmcsd_gpios(unsigned gpio)
-{
-	gpio_request(gpio + 0, "mmc0_ro");
-	gpio_request(gpio + 1, "mmc0_cd");
-	gpio_request(gpio + 2, "mmc1_ro");
-	gpio_request(gpio + 3, "mmc1_cd");
-
-	/* we "know" these are input-only so we don't
-	 * need to call gpio_direction_input()
-	 */
-
-	leopard_mmc_gpio = gpio;
-}
-
-static struct i2c_board_info dm355leopard_i2c_info[] = {
-	{ I2C_BOARD_INFO("dm355leopard_msp", 0x25),
-		.platform_data = dm355leopard_mmcsd_gpios,
-		/* plus irq */ },
-	/* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */
-	/* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */
-};
-
-static void __init leopard_init_i2c(void)
-{
-	davinci_init_i2c(&i2c_pdata);
-
-	gpio_request(5, "dm355leopard_msp");
-	gpio_direction_input(5);
-	dm355leopard_i2c_info[0].irq = gpio_to_irq(5);
-
-	i2c_register_board_info(1, dm355leopard_i2c_info,
-			ARRAY_SIZE(dm355leopard_i2c_info));
-}
-
-static struct resource dm355leopard_dm9000_rsrc[] = {
-	{
-		/* addr */
-		.start	= 0x04000000,
-		.end	= 0x04000001,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		/* data */
-		.start	= 0x04000016,
-		.end	= 0x04000017,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.flags	= IORESOURCE_IRQ
-			| IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */,
-	},
-};
-
-static struct platform_device dm355leopard_dm9000 = {
-	.name		= "dm9000",
-	.id		= -1,
-	.resource	= dm355leopard_dm9000_rsrc,
-	.num_resources	= ARRAY_SIZE(dm355leopard_dm9000_rsrc),
-};
-
-static struct platform_device *davinci_leopard_devices[] __initdata = {
-	&dm355leopard_dm9000,
-	&davinci_nand_device,
-};
-
-static void __init dm355_leopard_map_io(void)
-{
-	dm355_init();
-}
-
-static int dm355leopard_mmc_get_cd(int module)
-{
-	if (!gpio_is_valid(leopard_mmc_gpio))
-		return -ENXIO;
-	/* low == card present */
-	return !gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 1);
-}
-
-static int dm355leopard_mmc_get_ro(int module)
-{
-	if (!gpio_is_valid(leopard_mmc_gpio))
-		return -ENXIO;
-	/* high == card's write protect switch active */
-	return gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 0);
-}
-
-static struct davinci_mmc_config dm355leopard_mmc_config = {
-	.get_cd		= dm355leopard_mmc_get_cd,
-	.get_ro		= dm355leopard_mmc_get_ro,
-	.wires		= 4,
-	.max_freq       = 50000000,
-	.caps           = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-};
-
-/* Don't connect anything to J10 unless you're only using USB host
- * mode *and* have to do so with some kind of gender-bender.  If
- * you have proper Mini-B or Mini-A cables (or Mini-A adapters)
- * the ID pin won't need any help.
- */
-#define USB_ID_VALUE	1	/* ID pulled low */
-
-static struct spi_eeprom at25640a = {
-	.byte_len	= SZ_64K / 8,
-	.name		= "at25640a",
-	.page_size	= 32,
-	.flags		= EE_ADDR2,
-};
-
-static const struct spi_board_info dm355_leopard_spi_info[] __initconst = {
-	{
-		.modalias	= "at25",
-		.platform_data	= &at25640a,
-		.max_speed_hz	= 10 * 1000 * 1000,	/* at 3v3 */
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.mode		= SPI_MODE_0,
-	},
-};
-
-static __init void dm355_leopard_init(void)
-{
-	struct clk *aemif;
-	int ret;
-
-	dm355_register_clocks();
-
-	ret = dm355_gpio_register();
-	if (ret)
-		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
-
-	gpio_request(9, "dm9000");
-	gpio_direction_input(9);
-	dm355leopard_dm9000_rsrc[2].start = gpio_to_irq(9);
-
-	aemif = clk_get(&dm355leopard_dm9000.dev, "aemif");
-	if (!WARN(IS_ERR(aemif), "unable to get AEMIF clock\n"))
-		clk_prepare_enable(aemif);
-
-	platform_add_devices(davinci_leopard_devices,
-			     ARRAY_SIZE(davinci_leopard_devices));
-	leopard_init_i2c();
-	davinci_serial_init(dm355_serial_device);
-
-	/* NOTE:  NAND flash timings set by the UBL are slower than
-	 * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204
-	 * but could be 0x0400008c for about 25% faster page reads.
-	 */
-
-	gpio_request(2, "usb_id_toggle");
-	gpio_direction_output(2, USB_ID_VALUE);
-	/* irlml6401 switches over 1A in under 8 msec */
-	davinci_setup_usb(1000, 8);
-
-	davinci_setup_mmc(0, &dm355leopard_mmc_config);
-	davinci_setup_mmc(1, &dm355leopard_mmc_config);
-
-	dm355_init_spi0(BIT(0), dm355_leopard_spi_info,
-			ARRAY_SIZE(dm355_leopard_spi_info));
-}
-
-MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
-	.atag_offset  = 0x100,
-	.map_io	      = dm355_leopard_map_io,
-	.init_irq     = dm355_init_irq,
-	.init_time	= dm355_init_time,
-	.init_machine = dm355_leopard_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
deleted file mode 100644
index d8c6c360818b..000000000000
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ /dev/null
@@ -1,855 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * TI DaVinci DM365 EVM board support
- *
- * Copyright (C) 2009 Texas Instruments Incorporated
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/property.h>
-#include <linux/leds.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/slab.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/nvmem-provider.h>
-#include <linux/input.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/eeprom.h>
-#include <linux/v4l2-dv-timings.h>
-#include <linux/platform_data/ti-aemif.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <linux/platform_data/i2c-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/keyscan-davinci.h>
-
-#include <media/i2c/ths7303.h>
-#include <media/i2c/tvp514x.h>
-
-#include "mux.h"
-#include "common.h"
-#include "serial.h"
-#include "davinci.h"
-
-static inline int have_imager(void)
-{
-	/* REVISIT when it's supported, trigger via Kconfig */
-	return 0;
-}
-
-static inline int have_tvp7002(void)
-{
-	/* REVISIT when it's supported, trigger via Kconfig */
-	return 0;
-}
-
-#define DM365_EVM_PHY_ID		"davinci_mdio-0:01"
-/*
- * A MAX-II CPLD is used for various board control functions.
- */
-#define CPLD_OFFSET(a13a8,a2a1)		(((a13a8) << 10) + ((a2a1) << 3))
-
-#define CPLD_VERSION	CPLD_OFFSET(0,0)	/* r/o */
-#define CPLD_TEST	CPLD_OFFSET(0,1)
-#define CPLD_LEDS	CPLD_OFFSET(0,2)
-#define CPLD_MUX	CPLD_OFFSET(0,3)
-#define CPLD_SWITCH	CPLD_OFFSET(1,0)	/* r/o */
-#define CPLD_POWER	CPLD_OFFSET(1,1)
-#define CPLD_VIDEO	CPLD_OFFSET(1,2)
-#define CPLD_CARDSTAT	CPLD_OFFSET(1,3)	/* r/o */
-
-#define CPLD_DILC_OUT	CPLD_OFFSET(2,0)
-#define CPLD_DILC_IN	CPLD_OFFSET(2,1)	/* r/o */
-
-#define CPLD_IMG_DIR0	CPLD_OFFSET(2,2)
-#define CPLD_IMG_MUX0	CPLD_OFFSET(2,3)
-#define CPLD_IMG_MUX1	CPLD_OFFSET(3,0)
-#define CPLD_IMG_DIR1	CPLD_OFFSET(3,1)
-#define CPLD_IMG_MUX2	CPLD_OFFSET(3,2)
-#define CPLD_IMG_MUX3	CPLD_OFFSET(3,3)
-#define CPLD_IMG_DIR2	CPLD_OFFSET(4,0)
-#define CPLD_IMG_MUX4	CPLD_OFFSET(4,1)
-#define CPLD_IMG_MUX5	CPLD_OFFSET(4,2)
-
-#define CPLD_RESETS	CPLD_OFFSET(4,3)
-
-#define CPLD_CCD_DIR1	CPLD_OFFSET(0x3e,0)
-#define CPLD_CCD_IO1	CPLD_OFFSET(0x3e,1)
-#define CPLD_CCD_DIR2	CPLD_OFFSET(0x3e,2)
-#define CPLD_CCD_IO2	CPLD_OFFSET(0x3e,3)
-#define CPLD_CCD_DIR3	CPLD_OFFSET(0x3f,0)
-#define CPLD_CCD_IO3	CPLD_OFFSET(0x3f,1)
-
-static void __iomem *cpld;
-
-
-/* NOTE:  this is geared for the standard config, with a socketed
- * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors.  If you
- * swap chips with a different block size, partitioning will
- * need to be changed. This NAND chip MT29F16G08FAA is the default
- * NAND shipped with the Spectrum Digital DM365 EVM
- */
-#define NAND_BLOCK_SIZE		SZ_128K
-
-static struct mtd_partition davinci_nand_partitions[] = {
-	{
-		/* UBL (a few copies) plus U-Boot */
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= 30 * NAND_BLOCK_SIZE,
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	}, {
-		/* U-Boot environment */
-		.name		= "params",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 2 * NAND_BLOCK_SIZE,
-		.mask_flags	= 0,
-	}, {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_4M,
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem1",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_512M,
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem2",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	}
-	/* two blocks with bad block table (and mirror) at the end */
-};
-
-static struct davinci_nand_pdata davinci_nand_data = {
-	.core_chipsel		= 0,
-	.mask_chipsel		= BIT(14),
-	.parts			= davinci_nand_partitions,
-	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
-	.engine_type		= NAND_ECC_ENGINE_TYPE_ON_HOST,
-	.bbt_options		= NAND_BBT_USE_FLASH,
-	.ecc_bits		= 4,
-};
-
-static struct resource davinci_nand_resources[] = {
-	{
-		.start		= DM365_ASYNC_EMIF_DATA_CE0_BASE,
-		.end		= DM365_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= DM365_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DM365_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device davinci_aemif_devices[] = {
-	{
-		.name		= "davinci_nand",
-		.id		= 0,
-		.num_resources	= ARRAY_SIZE(davinci_nand_resources),
-		.resource	= davinci_nand_resources,
-		.dev		= {
-			.platform_data	= &davinci_nand_data,
-		},
-	}
-};
-
-static struct resource davinci_aemif_resources[] = {
-	{
-		.start		= DM365_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DM365_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct aemif_abus_data da850_evm_aemif_abus_data[] = {
-	{
-		.cs		= 1,
-	},
-};
-
-static struct aemif_platform_data davinci_aemif_pdata = {
-	.abus_data		= da850_evm_aemif_abus_data,
-	.num_abus_data		= ARRAY_SIZE(da850_evm_aemif_abus_data),
-	.sub_devices		= davinci_aemif_devices,
-	.num_sub_devices	= ARRAY_SIZE(davinci_aemif_devices),
-};
-
-static struct platform_device davinci_aemif_device = {
-	.name			= "ti-aemif",
-	.id			= -1,
-	.dev = {
-		.platform_data	= &davinci_aemif_pdata,
-	},
-	.resource		= davinci_aemif_resources,
-	.num_resources		= ARRAY_SIZE(davinci_aemif_resources),
-};
-
-static struct nvmem_cell_info davinci_nvmem_cells[] = {
-	{
-		.name		= "macaddr",
-		.offset		= 0x7f00,
-		.bytes		= ETH_ALEN,
-	}
-};
-
-static struct nvmem_cell_table davinci_nvmem_cell_table = {
-	.nvmem_name	= "1-00500",
-	.cells		= davinci_nvmem_cells,
-	.ncells		= ARRAY_SIZE(davinci_nvmem_cells),
-};
-
-static struct nvmem_cell_lookup davinci_nvmem_cell_lookup = {
-	.nvmem_name	= "1-00500",
-	.cell_name	= "macaddr",
-	.dev_id		= "davinci_emac.1",
-	.con_id		= "mac-address",
-};
-
-static const struct property_entry eeprom_properties[] = {
-	PROPERTY_ENTRY_U32("pagesize", 64),
-	{ }
-};
-
-static const struct software_node eeprom_node = {
-	.properties = eeprom_properties,
-};
-
-static struct i2c_board_info i2c_info[] = {
-	{
-		I2C_BOARD_INFO("24c256", 0x50),
-		.swnode = &eeprom_node,
-	},
-	{
-		I2C_BOARD_INFO("tlv320aic3x", 0x18),
-	},
-};
-
-static struct davinci_i2c_platform_data i2c_pdata = {
-	.bus_freq	= 400	/* kHz */,
-	.bus_delay	= 0	/* usec */,
-};
-
-/* Fixed regulator support */
-static struct regulator_consumer_supply fixed_supplies_3_3v[] = {
-	/* Baseboard 3.3V: 5V -> TPS767D301 -> 3.3V */
-	REGULATOR_SUPPLY("AVDD", "1-0018"),
-	REGULATOR_SUPPLY("DRVDD", "1-0018"),
-	REGULATOR_SUPPLY("IOVDD", "1-0018"),
-};
-
-static struct regulator_consumer_supply fixed_supplies_1_8v[] = {
-	/* Baseboard 1.8V: 5V -> TPS767D301 -> 1.8V */
-	REGULATOR_SUPPLY("DVDD", "1-0018"),
-};
-
-static int dm365evm_keyscan_enable(struct device *dev)
-{
-	return davinci_cfg_reg(DM365_KEYSCAN);
-}
-
-static unsigned short dm365evm_keymap[] = {
-	KEY_KP2,
-	KEY_LEFT,
-	KEY_EXIT,
-	KEY_DOWN,
-	KEY_ENTER,
-	KEY_UP,
-	KEY_KP1,
-	KEY_RIGHT,
-	KEY_MENU,
-	KEY_RECORD,
-	KEY_REWIND,
-	KEY_KPMINUS,
-	KEY_STOP,
-	KEY_FASTFORWARD,
-	KEY_KPPLUS,
-	KEY_PLAYPAUSE,
-	0
-};
-
-static struct davinci_ks_platform_data dm365evm_ks_data = {
-	.device_enable	= dm365evm_keyscan_enable,
-	.keymap		= dm365evm_keymap,
-	.keymapsize	= ARRAY_SIZE(dm365evm_keymap),
-	.rep		= 1,
-	/* Scan period = strobe + interval */
-	.strobe		= 0x5,
-	.interval	= 0x2,
-	.matrix_type	= DAVINCI_KEYSCAN_MATRIX_4X4,
-};
-
-static int cpld_mmc_get_cd(int module)
-{
-	if (!cpld)
-		return -ENXIO;
-
-	/* low == card present */
-	return !(__raw_readb(cpld + CPLD_CARDSTAT) & BIT(module ? 4 : 0));
-}
-
-static int cpld_mmc_get_ro(int module)
-{
-	if (!cpld)
-		return -ENXIO;
-
-	/* high == card's write protect switch active */
-	return !!(__raw_readb(cpld + CPLD_CARDSTAT) & BIT(module ? 5 : 1));
-}
-
-static struct davinci_mmc_config dm365evm_mmc_config = {
-	.get_cd		= cpld_mmc_get_cd,
-	.get_ro		= cpld_mmc_get_ro,
-	.wires		= 4,
-	.max_freq	= 50000000,
-	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-};
-
-static void dm365evm_emac_configure(void)
-{
-	/*
-	 * EMAC pins are multiplexed with GPIO and UART
-	 * Further details are available at the DM365 ARM
-	 * Subsystem Users Guide(sprufg5.pdf) pages 125 - 127
-	 */
-	davinci_cfg_reg(DM365_EMAC_TX_EN);
-	davinci_cfg_reg(DM365_EMAC_TX_CLK);
-	davinci_cfg_reg(DM365_EMAC_COL);
-	davinci_cfg_reg(DM365_EMAC_TXD3);
-	davinci_cfg_reg(DM365_EMAC_TXD2);
-	davinci_cfg_reg(DM365_EMAC_TXD1);
-	davinci_cfg_reg(DM365_EMAC_TXD0);
-	davinci_cfg_reg(DM365_EMAC_RXD3);
-	davinci_cfg_reg(DM365_EMAC_RXD2);
-	davinci_cfg_reg(DM365_EMAC_RXD1);
-	davinci_cfg_reg(DM365_EMAC_RXD0);
-	davinci_cfg_reg(DM365_EMAC_RX_CLK);
-	davinci_cfg_reg(DM365_EMAC_RX_DV);
-	davinci_cfg_reg(DM365_EMAC_RX_ER);
-	davinci_cfg_reg(DM365_EMAC_CRS);
-	davinci_cfg_reg(DM365_EMAC_MDIO);
-	davinci_cfg_reg(DM365_EMAC_MDCLK);
-
-	/*
-	 * EMAC interrupts are multiplexed with GPIO interrupts
-	 * Details are available at the DM365 ARM
-	 * Subsystem Users Guide(sprufg5.pdf) pages 133 - 134
-	 */
-	davinci_cfg_reg(DM365_INT_EMAC_RXTHRESH);
-	davinci_cfg_reg(DM365_INT_EMAC_RXPULSE);
-	davinci_cfg_reg(DM365_INT_EMAC_TXPULSE);
-	davinci_cfg_reg(DM365_INT_EMAC_MISCPULSE);
-}
-
-static void dm365evm_mmc_configure(void)
-{
-	/*
-	 * MMC/SD pins are multiplexed with GPIO and EMIF
-	 * Further details are available at the DM365 ARM
-	 * Subsystem Users Guide(sprufg5.pdf) pages 118, 128 - 131
-	 */
-	davinci_cfg_reg(DM365_SD1_CLK);
-	davinci_cfg_reg(DM365_SD1_CMD);
-	davinci_cfg_reg(DM365_SD1_DATA3);
-	davinci_cfg_reg(DM365_SD1_DATA2);
-	davinci_cfg_reg(DM365_SD1_DATA1);
-	davinci_cfg_reg(DM365_SD1_DATA0);
-}
-
-static struct tvp514x_platform_data tvp5146_pdata = {
-	.clk_polarity = 0,
-	.hs_polarity = 1,
-	.vs_polarity = 1
-};
-
-#define TVP514X_STD_ALL        (V4L2_STD_NTSC | V4L2_STD_PAL)
-/* Inputs available at the TVP5146 */
-static struct v4l2_input tvp5146_inputs[] = {
-	{
-		.index = 0,
-		.name = "Composite",
-		.type = V4L2_INPUT_TYPE_CAMERA,
-		.std = TVP514X_STD_ALL,
-	},
-	{
-		.index = 1,
-		.name = "S-Video",
-		.type = V4L2_INPUT_TYPE_CAMERA,
-		.std = TVP514X_STD_ALL,
-	},
-};
-
-/*
- * this is the route info for connecting each input to decoder
- * ouput that goes to vpfe. There is a one to one correspondence
- * with tvp5146_inputs
- */
-static struct vpfe_route tvp5146_routes[] = {
-	{
-		.input = INPUT_CVBS_VI2B,
-		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-	},
-{
-		.input = INPUT_SVIDEO_VI2C_VI1C,
-		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-	},
-};
-
-static struct vpfe_subdev_info vpfe_sub_devs[] = {
-	{
-		.name = "tvp5146",
-		.grp_id = 0,
-		.num_inputs = ARRAY_SIZE(tvp5146_inputs),
-		.inputs = tvp5146_inputs,
-		.routes = tvp5146_routes,
-		.can_route = 1,
-		.ccdc_if_params = {
-			.if_type = VPFE_BT656,
-			.hdpol = VPFE_PINPOL_POSITIVE,
-			.vdpol = VPFE_PINPOL_POSITIVE,
-		},
-		.board_info = {
-			I2C_BOARD_INFO("tvp5146", 0x5d),
-			.platform_data = &tvp5146_pdata,
-		},
-	},
-};
-
-static struct vpfe_config vpfe_cfg = {
-	.num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
-	.sub_devs = vpfe_sub_devs,
-	.i2c_adapter_id = 1,
-	.card_name = "DM365 EVM",
-	.ccdc = "ISIF",
-};
-
-/* venc standards timings */
-static struct vpbe_enc_mode_info dm365evm_enc_std_timing[] = {
-	{
-		.name		= "ntsc",
-		.timings_type	= VPBE_ENC_STD,
-		.std_id		= V4L2_STD_NTSC,
-		.interlaced	= 1,
-		.xres		= 720,
-		.yres		= 480,
-		.aspect		= {11, 10},
-		.fps		= {30000, 1001},
-		.left_margin	= 0x79,
-		.upper_margin	= 0x10,
-	},
-	{
-		.name		= "pal",
-		.timings_type	= VPBE_ENC_STD,
-		.std_id		= V4L2_STD_PAL,
-		.interlaced	= 1,
-		.xres		= 720,
-		.yres		= 576,
-		.aspect		= {54, 59},
-		.fps		= {25, 1},
-		.left_margin	= 0x7E,
-		.upper_margin	= 0x16,
-	},
-};
-
-/* venc dv timings */
-static struct vpbe_enc_mode_info dm365evm_enc_preset_timing[] = {
-	{
-		.name		= "480p59_94",
-		.timings_type	= VPBE_ENC_DV_TIMINGS,
-		.dv_timings	= V4L2_DV_BT_CEA_720X480P59_94,
-		.interlaced	= 0,
-		.xres		= 720,
-		.yres		= 480,
-		.aspect		= {1, 1},
-		.fps		= {5994, 100},
-		.left_margin	= 0x8F,
-		.upper_margin	= 0x2D,
-	},
-	{
-		.name		= "576p50",
-		.timings_type	= VPBE_ENC_DV_TIMINGS,
-		.dv_timings	= V4L2_DV_BT_CEA_720X576P50,
-		.interlaced	= 0,
-		.xres		= 720,
-		.yres		= 576,
-		.aspect		= {1, 1},
-		.fps		= {50, 1},
-		.left_margin	= 0x8C,
-		.upper_margin   = 0x36,
-	},
-	{
-		.name		= "720p60",
-		.timings_type	= VPBE_ENC_DV_TIMINGS,
-		.dv_timings	= V4L2_DV_BT_CEA_1280X720P60,
-		.interlaced	= 0,
-		.xres		= 1280,
-		.yres		= 720,
-		.aspect		= {1, 1},
-		.fps		= {60, 1},
-		.left_margin	= 0x117,
-		.right_margin	= 70,
-		.upper_margin	= 38,
-		.lower_margin	= 3,
-		.hsync_len	= 80,
-		.vsync_len	= 5,
-	},
-	{
-		.name		= "1080i60",
-		.timings_type	= VPBE_ENC_DV_TIMINGS,
-		.dv_timings	= V4L2_DV_BT_CEA_1920X1080I60,
-		.interlaced	= 1,
-		.xres		= 1920,
-		.yres		= 1080,
-		.aspect		= {1, 1},
-		.fps		= {30, 1},
-		.left_margin	= 0xc9,
-		.right_margin	= 80,
-		.upper_margin	= 30,
-		.lower_margin	= 3,
-		.hsync_len	= 88,
-		.vsync_len	= 5,
-	},
-};
-
-#define VENC_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
-
-/*
- * The outputs available from VPBE + ecnoders. Keep the
- * the order same as that of encoders. First those from venc followed by that
- * from encoders. Index in the output refers to index on a particular
- * encoder.Driver uses this index to pass it to encoder when it supports more
- * than one output. Application uses index of the array to set an output.
- */
-static struct vpbe_output dm365evm_vpbe_outputs[] = {
-	{
-		.output		= {
-			.index		= 0,
-			.name		= "Composite",
-			.type		= V4L2_OUTPUT_TYPE_ANALOG,
-			.std		= VENC_STD_ALL,
-			.capabilities	= V4L2_OUT_CAP_STD,
-		},
-		.subdev_name	= DM365_VPBE_VENC_SUBDEV_NAME,
-		.default_mode	= "ntsc",
-		.num_modes	= ARRAY_SIZE(dm365evm_enc_std_timing),
-		.modes		= dm365evm_enc_std_timing,
-		.if_params	= MEDIA_BUS_FMT_FIXED,
-	},
-	{
-		.output		= {
-			.index		= 1,
-			.name		= "Component",
-			.type		= V4L2_OUTPUT_TYPE_ANALOG,
-			.capabilities	= V4L2_OUT_CAP_DV_TIMINGS,
-		},
-		.subdev_name	= DM365_VPBE_VENC_SUBDEV_NAME,
-		.default_mode	= "480p59_94",
-		.num_modes	= ARRAY_SIZE(dm365evm_enc_preset_timing),
-		.modes		= dm365evm_enc_preset_timing,
-		.if_params	= MEDIA_BUS_FMT_FIXED,
-	},
-};
-
-/*
- * Amplifiers on the board
- */
-static struct ths7303_platform_data ths7303_pdata = {
-	.ch_1 = 3,
-	.ch_2 = 3,
-	.ch_3 = 3,
-};
-
-static struct amp_config_info vpbe_amp = {
-	.module_name	= "ths7303",
-	.is_i2c		= 1,
-	.board_info	= {
-		I2C_BOARD_INFO("ths7303", 0x2c),
-		.platform_data = &ths7303_pdata,
-	}
-};
-
-static struct vpbe_config dm365evm_display_cfg = {
-	.module_name	= "dm365-vpbe-display",
-	.i2c_adapter_id	= 1,
-	.amp		= &vpbe_amp,
-	.osd		= {
-		.module_name	= DM365_VPBE_OSD_SUBDEV_NAME,
-	},
-	.venc		= {
-		.module_name	= DM365_VPBE_VENC_SUBDEV_NAME,
-	},
-	.num_outputs	= ARRAY_SIZE(dm365evm_vpbe_outputs),
-	.outputs	= dm365evm_vpbe_outputs,
-};
-
-static void __init evm_init_i2c(void)
-{
-	davinci_init_i2c(&i2c_pdata);
-	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
-}
-
-static inline int have_leds(void)
-{
-#ifdef CONFIG_LEDS_CLASS
-	return 1;
-#else
-	return 0;
-#endif
-}
-
-struct cpld_led {
-	struct led_classdev	cdev;
-	u8			mask;
-};
-
-static const struct {
-	const char *name;
-	const char *trigger;
-} cpld_leds[] = {
-	{ "dm365evm::ds2", },
-	{ "dm365evm::ds3", },
-	{ "dm365evm::ds4", },
-	{ "dm365evm::ds5", },
-	{ "dm365evm::ds6", "nand-disk", },
-	{ "dm365evm::ds7", "mmc1", },
-	{ "dm365evm::ds8", "mmc0", },
-	{ "dm365evm::ds9", "heartbeat", },
-};
-
-static void cpld_led_set(struct led_classdev *cdev, enum led_brightness b)
-{
-	struct cpld_led *led = container_of(cdev, struct cpld_led, cdev);
-	u8 reg = __raw_readb(cpld + CPLD_LEDS);
-
-	if (b != LED_OFF)
-		reg &= ~led->mask;
-	else
-		reg |= led->mask;
-	__raw_writeb(reg, cpld + CPLD_LEDS);
-}
-
-static enum led_brightness cpld_led_get(struct led_classdev *cdev)
-{
-	struct cpld_led *led = container_of(cdev, struct cpld_led, cdev);
-	u8 reg = __raw_readb(cpld + CPLD_LEDS);
-
-	return (reg & led->mask) ? LED_OFF : LED_FULL;
-}
-
-static int __init cpld_leds_init(void)
-{
-	int	i;
-
-	if (!have_leds() ||  !cpld)
-		return 0;
-
-	/* setup LEDs */
-	__raw_writeb(0xff, cpld + CPLD_LEDS);
-	for (i = 0; i < ARRAY_SIZE(cpld_leds); i++) {
-		struct cpld_led *led;
-
-		led = kzalloc(sizeof(*led), GFP_KERNEL);
-		if (!led)
-			break;
-
-		led->cdev.name = cpld_leds[i].name;
-		led->cdev.brightness_set = cpld_led_set;
-		led->cdev.brightness_get = cpld_led_get;
-		led->cdev.default_trigger = cpld_leds[i].trigger;
-		led->mask = BIT(i);
-
-		if (led_classdev_register(NULL, &led->cdev) < 0) {
-			kfree(led);
-			break;
-		}
-	}
-
-	return 0;
-}
-/* run after subsys_initcall() for LEDs */
-fs_initcall(cpld_leds_init);
-
-
-static void __init evm_init_cpld(void)
-{
-	u8 mux, resets;
-	const char *label;
-	struct clk *aemif_clk;
-	int rc;
-
-	/* Make sure we can configure the CPLD through CS1.  Then
-	 * leave it on for later access to MMC and LED registers.
-	 */
-	aemif_clk = clk_get(NULL, "aemif");
-	if (IS_ERR(aemif_clk))
-		return;
-	clk_prepare_enable(aemif_clk);
-
-	if (request_mem_region(DM365_ASYNC_EMIF_DATA_CE1_BASE, SECTION_SIZE,
-			"cpld") == NULL)
-		goto fail;
-	cpld = ioremap(DM365_ASYNC_EMIF_DATA_CE1_BASE, SECTION_SIZE);
-	if (!cpld) {
-		release_mem_region(DM365_ASYNC_EMIF_DATA_CE1_BASE,
-				SECTION_SIZE);
-fail:
-		pr_err("ERROR: can't map CPLD\n");
-		clk_disable_unprepare(aemif_clk);
-		return;
-	}
-
-	/* External muxing for some signals */
-	mux = 0;
-
-	/* Read SW5 to set up NAND + keypad _or_ OneNAND (sync read).
-	 * NOTE:  SW4 bus width setting must match!
-	 */
-	if ((__raw_readb(cpld + CPLD_SWITCH) & BIT(5)) == 0) {
-		/* external keypad mux */
-		mux |= BIT(7);
-
-		rc = platform_device_register(&davinci_aemif_device);
-		if (rc)
-			pr_warn("%s(): error registering the aemif device: %d\n",
-				__func__, rc);
-	} else {
-		/* no OneNAND support yet */
-	}
-
-	/* Leave external chips in reset when unused. */
-	resets = BIT(3) | BIT(2) | BIT(1) | BIT(0);
-
-	/* Static video input config with SN74CBT16214 1-of-3 mux:
-	 *  - port b1 == tvp7002 (mux lowbits == 1 or 6)
-	 *  - port b2 == imager (mux lowbits == 2 or 7)
-	 *  - port b3 == tvp5146 (mux lowbits == 5)
-	 *
-	 * Runtime switching could work too, with limitations.
-	 */
-	if (have_imager()) {
-		label = "HD imager";
-		mux |= 2;
-
-		/* externally mux MMC1/ENET/AIC33 to imager */
-		mux |= BIT(6) | BIT(5) | BIT(3);
-	} else {
-		struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-		/* we can use MMC1 ... */
-		dm365evm_mmc_configure();
-		davinci_setup_mmc(1, &dm365evm_mmc_config);
-
-		/* ... and ENET ... */
-		dm365evm_emac_configure();
-		soc_info->emac_pdata->phy_id = DM365_EVM_PHY_ID;
-		resets &= ~BIT(3);
-
-		/* ... and AIC33 */
-		resets &= ~BIT(1);
-
-		if (have_tvp7002()) {
-			mux |= 1;
-			resets &= ~BIT(2);
-			label = "tvp7002 HD";
-		} else {
-			/* default to tvp5146 */
-			mux |= 5;
-			resets &= ~BIT(0);
-			label = "tvp5146 SD";
-		}
-	}
-	__raw_writeb(mux, cpld + CPLD_MUX);
-	__raw_writeb(resets, cpld + CPLD_RESETS);
-	pr_info("EVM: %s video input\n", label);
-
-	/* REVISIT export switches: NTSC/PAL (SW5.6), EXTRA1 (SW5.2), etc */
-}
-
-static void __init dm365_evm_map_io(void)
-{
-	dm365_init();
-}
-
-static struct spi_eeprom at25640 = {
-	.byte_len	= SZ_64K / 8,
-	.name		= "at25640",
-	.page_size	= 32,
-	.flags		= EE_ADDR2,
-};
-
-static const struct spi_board_info dm365_evm_spi_info[] __initconst = {
-	{
-		.modalias	= "at25",
-		.platform_data	= &at25640,
-		.max_speed_hz	= 10 * 1000 * 1000,
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.mode		= SPI_MODE_0,
-	},
-};
-
-static __init void dm365_evm_init(void)
-{
-	int ret;
-
-	dm365_register_clocks();
-
-	ret = dm365_gpio_register();
-	if (ret)
-		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
-
-	regulator_register_always_on(0, "fixed-dummy", fixed_supplies_1_8v,
-				     ARRAY_SIZE(fixed_supplies_1_8v), 1800000);
-	regulator_register_always_on(1, "fixed-dummy", fixed_supplies_3_3v,
-				     ARRAY_SIZE(fixed_supplies_3_3v), 3300000);
-
-	nvmem_add_cell_table(&davinci_nvmem_cell_table);
-	nvmem_add_cell_lookups(&davinci_nvmem_cell_lookup, 1);
-
-	evm_init_i2c();
-	davinci_serial_init(dm365_serial_device);
-
-	dm365evm_emac_configure();
-	dm365evm_mmc_configure();
-
-	davinci_setup_mmc(0, &dm365evm_mmc_config);
-
-	dm365_init_video(&vpfe_cfg, &dm365evm_display_cfg);
-
-	/* maybe setup mmc1/etc ... _after_ mmc0 */
-	evm_init_cpld();
-
-#ifdef CONFIG_SND_SOC_DM365_AIC3X_CODEC
-	dm365_init_asp();
-#elif defined(CONFIG_SND_SOC_DM365_VOICE_CODEC)
-	dm365_init_vc();
-#endif
-	dm365_init_rtc();
-	dm365_init_ks(&dm365evm_ks_data);
-
-	dm365_init_spi0(BIT(0), dm365_evm_spi_info,
-			ARRAY_SIZE(dm365_evm_spi_info));
-}
-
-MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
-	.atag_offset	= 0x100,
-	.map_io		= dm365_evm_map_io,
-	.init_irq	= dm365_init_irq,
-	.init_time	= dm365_init_time,
-	.init_machine	= dm365_evm_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
deleted file mode 100644
index a46e7b9ff8e0..000000000000
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ /dev/null
@@ -1,638 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Critical Link MityOMAP-L138 SoM
- *
- * Copyright (C) 2010 Critical Link LLC - https://www.criticallink.com
- */
-
-#define pr_fmt(fmt) "MityOMAPL138: " fmt
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/platform_device.h>
-#include <linux/property.h>
-#include <linux/mtd/partitions.h>
-#include <linux/notifier.h>
-#include <linux/nvmem-consumer.h>
-#include <linux/nvmem-provider.h>
-#include <linux/regulator/machine.h>
-#include <linux/i2c.h>
-#include <linux/etherdevice.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-
-#include <asm/io.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "da8xx.h"
-#include "mux.h"
-
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mtd-davinci-aemif.h>
-#include <linux/platform_data/ti-aemif.h>
-#include <linux/platform_data/spi-davinci.h>
-
-#define MITYOMAPL138_PHY_ID		""
-
-#define FACTORY_CONFIG_MAGIC	0x012C0138
-#define FACTORY_CONFIG_VERSION	0x00010001
-
-/* Data Held in On-Board I2C device */
-struct factory_config {
-	u32	magic;
-	u32	version;
-	u8	mac[6];
-	u32	fpga_type;
-	u32	spare;
-	u32	serialnumber;
-	char	partnum[32];
-};
-
-static struct factory_config factory_config;
-
-#ifdef CONFIG_CPU_FREQ
-struct part_no_info {
-	const char	*part_no;	/* part number string of interest */
-	int		max_freq;	/* khz */
-};
-
-static struct part_no_info mityomapl138_pn_info[] = {
-	{
-		.part_no	= "L138-C",
-		.max_freq	= 300000,
-	},
-	{
-		.part_no	= "L138-D",
-		.max_freq	= 375000,
-	},
-	{
-		.part_no	= "L138-F",
-		.max_freq	= 456000,
-	},
-	{
-		.part_no	= "1808-C",
-		.max_freq	= 300000,
-	},
-	{
-		.part_no	= "1808-D",
-		.max_freq	= 375000,
-	},
-	{
-		.part_no	= "1808-F",
-		.max_freq	= 456000,
-	},
-	{
-		.part_no	= "1810-D",
-		.max_freq	= 375000,
-	},
-};
-
-static void mityomapl138_cpufreq_init(const char *partnum)
-{
-	int i, ret;
-
-	for (i = 0; partnum && i < ARRAY_SIZE(mityomapl138_pn_info); i++) {
-		/*
-		 * the part number has additional characters beyond what is
-		 * stored in the table.  This information is not needed for
-		 * determining the speed grade, and would require several
-		 * more table entries.  Only check the first N characters
-		 * for a match.
-		 */
-		if (!strncmp(partnum, mityomapl138_pn_info[i].part_no,
-			     strlen(mityomapl138_pn_info[i].part_no))) {
-			da850_max_speed = mityomapl138_pn_info[i].max_freq;
-			break;
-		}
-	}
-
-	ret = da850_register_cpufreq("pll0_sysclk3");
-	if (ret)
-		pr_warn("cpufreq registration failed: %d\n", ret);
-}
-#else
-static void mityomapl138_cpufreq_init(const char *partnum) { }
-#endif
-
-static int read_factory_config(struct notifier_block *nb,
-			       unsigned long event, void *data)
-{
-	int ret;
-	const char *partnum = NULL;
-	struct nvmem_device *nvmem = data;
-
-	if (strcmp(nvmem_dev_name(nvmem), "1-00500") != 0)
-		return NOTIFY_DONE;
-
-	if (!IS_BUILTIN(CONFIG_NVMEM)) {
-		pr_warn("Factory Config not available without CONFIG_NVMEM\n");
-		goto bad_config;
-	}
-
-	ret = nvmem_device_read(nvmem, 0, sizeof(factory_config),
-				&factory_config);
-	if (ret != sizeof(struct factory_config)) {
-		pr_warn("Read Factory Config Failed: %d\n", ret);
-		goto bad_config;
-	}
-
-	if (factory_config.magic != FACTORY_CONFIG_MAGIC) {
-		pr_warn("Factory Config Magic Wrong (%X)\n",
-			factory_config.magic);
-		goto bad_config;
-	}
-
-	if (factory_config.version != FACTORY_CONFIG_VERSION) {
-		pr_warn("Factory Config Version Wrong (%X)\n",
-			factory_config.version);
-		goto bad_config;
-	}
-
-	partnum = factory_config.partnum;
-	pr_info("Part Number = %s\n", partnum);
-
-bad_config:
-	/* default maximum speed is valid for all platforms */
-	mityomapl138_cpufreq_init(partnum);
-
-	return NOTIFY_STOP;
-}
-
-static struct notifier_block mityomapl138_nvmem_notifier = {
-	.notifier_call = read_factory_config,
-};
-
-/*
- * We don't define a cell for factory config as it will be accessed from the
- * board file using the nvmem notifier chain.
- */
-static struct nvmem_cell_info mityomapl138_nvmem_cells[] = {
-	{
-		.name		= "macaddr",
-		.offset		= 0x64,
-		.bytes		= ETH_ALEN,
-	}
-};
-
-static struct nvmem_cell_table mityomapl138_nvmem_cell_table = {
-	.nvmem_name	= "1-00500",
-	.cells		= mityomapl138_nvmem_cells,
-	.ncells		= ARRAY_SIZE(mityomapl138_nvmem_cells),
-};
-
-static struct nvmem_cell_lookup mityomapl138_nvmem_cell_lookup = {
-	.nvmem_name	= "1-00500",
-	.cell_name	= "macaddr",
-	.dev_id		= "davinci_emac.1",
-	.con_id		= "mac-address",
-};
-
-static const struct property_entry mityomapl138_fd_chip_properties[] = {
-	PROPERTY_ENTRY_U32("pagesize", 8),
-	PROPERTY_ENTRY_BOOL("read-only"),
-	{ }
-};
-
-static const struct software_node mityomapl138_fd_chip_node = {
-	.properties = mityomapl138_fd_chip_properties,
-};
-
-static struct davinci_i2c_platform_data mityomap_i2c_0_pdata = {
-	.bus_freq	= 100,	/* kHz */
-	.bus_delay	= 0,	/* usec */
-};
-
-/* TPS65023 voltage regulator support */
-/* 1.2V Core */
-static struct regulator_consumer_supply tps65023_dcdc1_consumers[] = {
-	{
-		.supply = "cvdd",
-	},
-};
-
-/* 1.8V */
-static struct regulator_consumer_supply tps65023_dcdc2_consumers[] = {
-	{
-		.supply = "usb0_vdda18",
-	},
-	{
-		.supply = "usb1_vdda18",
-	},
-	{
-		.supply = "ddr_dvdd18",
-	},
-	{
-		.supply = "sata_vddr",
-	},
-};
-
-/* 1.2V */
-static struct regulator_consumer_supply tps65023_dcdc3_consumers[] = {
-	{
-		.supply = "sata_vdd",
-	},
-	{
-		.supply = "usb_cvdd",
-	},
-	{
-		.supply = "pll0_vdda",
-	},
-	{
-		.supply = "pll1_vdda",
-	},
-};
-
-/* 1.8V Aux LDO, not used */
-static struct regulator_consumer_supply tps65023_ldo1_consumers[] = {
-	{
-		.supply = "1.8v_aux",
-	},
-};
-
-/* FPGA VCC Aux (2.5 or 3.3) LDO */
-static struct regulator_consumer_supply tps65023_ldo2_consumers[] = {
-	{
-		.supply = "vccaux",
-	},
-};
-
-static struct regulator_init_data tps65023_regulator_data[] = {
-	/* dcdc1 */
-	{
-		.constraints = {
-			.min_uV = 1150000,
-			.max_uV = 1350000,
-			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-					  REGULATOR_CHANGE_STATUS,
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65023_dcdc1_consumers),
-		.consumer_supplies = tps65023_dcdc1_consumers,
-	},
-	/* dcdc2 */
-	{
-		.constraints = {
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65023_dcdc2_consumers),
-		.consumer_supplies = tps65023_dcdc2_consumers,
-	},
-	/* dcdc3 */
-	{
-		.constraints = {
-			.min_uV = 1200000,
-			.max_uV = 1200000,
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65023_dcdc3_consumers),
-		.consumer_supplies = tps65023_dcdc3_consumers,
-	},
-	/* ldo1 */
-	{
-		.constraints = {
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65023_ldo1_consumers),
-		.consumer_supplies = tps65023_ldo1_consumers,
-	},
-	/* ldo2 */
-	{
-		.constraints = {
-			.min_uV = 2500000,
-			.max_uV = 3300000,
-			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-					  REGULATOR_CHANGE_STATUS,
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65023_ldo2_consumers),
-		.consumer_supplies = tps65023_ldo2_consumers,
-	},
-};
-
-static struct i2c_board_info __initdata mityomap_tps65023_info[] = {
-	{
-		I2C_BOARD_INFO("tps65023", 0x48),
-		.platform_data = &tps65023_regulator_data[0],
-	},
-	{
-		I2C_BOARD_INFO("24c02", 0x50),
-		.swnode = &mityomapl138_fd_chip_node,
-	},
-};
-
-static int __init pmic_tps65023_init(void)
-{
-	return i2c_register_board_info(1, mityomap_tps65023_info,
-					ARRAY_SIZE(mityomap_tps65023_info));
-}
-
-/*
- * SPI Devices:
- *	SPI1_CS0: 8M Flash ST-M25P64-VME6G
- */
-static struct mtd_partition spi_flash_partitions[] = {
-	[0] = {
-		.name		= "ubl",
-		.offset		= 0,
-		.size		= SZ_64K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	[1] = {
-		.name		= "u-boot",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_512K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	[2] = {
-		.name		= "u-boot-env",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_64K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	[3] = {
-		.name		= "periph-config",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_64K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	[4] = {
-		.name		= "reserved",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_256K + SZ_64K,
-	},
-	[5] = {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_2M + SZ_1M,
-	},
-	[6] = {
-		.name		= "fpga",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_2M,
-	},
-	[7] = {
-		.name		= "spare",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct flash_platform_data mityomapl138_spi_flash_data = {
-	.name		= "m25p80",
-	.parts		= spi_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(spi_flash_partitions),
-	.type		= "m24p64",
-};
-
-static struct davinci_spi_config spi_eprom_config = {
-	.io_type	= SPI_IO_TYPE_DMA,
-	.c2tdelay	= 8,
-	.t2cdelay	= 8,
-};
-
-static struct spi_board_info mityomapl138_spi_flash_info[] = {
-	{
-		.modalias		= "m25p80",
-		.platform_data		= &mityomapl138_spi_flash_data,
-		.controller_data	= &spi_eprom_config,
-		.mode			= SPI_MODE_0,
-		.max_speed_hz		= 30000000,
-		.bus_num		= 1,
-		.chip_select		= 0,
-	},
-};
-
-/*
- * MityDSP-L138 includes a 256 MByte large-page NAND flash
- * (128K blocks).
- */
-static struct mtd_partition mityomapl138_nandflash_partition[] = {
-	{
-		.name		= "rootfs",
-		.offset		= 0,
-		.size		= SZ_128M,
-		.mask_flags	= 0, /* MTD_WRITEABLE, */
-	},
-	{
-		.name		= "homefs",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	},
-};
-
-static struct davinci_nand_pdata mityomapl138_nandflash_data = {
-	.core_chipsel	= 1,
-	.parts		= mityomapl138_nandflash_partition,
-	.nr_parts	= ARRAY_SIZE(mityomapl138_nandflash_partition),
-	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
-	.bbt_options	= NAND_BBT_USE_FLASH,
-	.options	= NAND_BUSWIDTH_16,
-	.ecc_bits	= 1, /* 4 bit mode is not supported with 16 bit NAND */
-};
-
-static struct resource mityomapl138_nandflash_resource[] = {
-	{
-		.start	= DA8XX_AEMIF_CS3_BASE,
-		.end	= DA8XX_AEMIF_CS3_BASE + SZ_512K + 2 * SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DA8XX_AEMIF_CTL_BASE,
-		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device mityomapl138_aemif_devices[] = {
-	{
-		.name		= "davinci_nand",
-		.id		= 1,
-		.dev		= {
-			.platform_data	= &mityomapl138_nandflash_data,
-		},
-		.num_resources	= ARRAY_SIZE(mityomapl138_nandflash_resource),
-		.resource	= mityomapl138_nandflash_resource,
-	},
-};
-
-static struct resource mityomapl138_aemif_resources[] = {
-	{
-		.start	= DA8XX_AEMIF_CTL_BASE,
-		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct aemif_abus_data mityomapl138_aemif_abus_data[] = {
-	{
-		.cs	= 1,
-	},
-};
-
-static struct aemif_platform_data mityomapl138_aemif_pdata = {
-	.abus_data		= mityomapl138_aemif_abus_data,
-	.num_abus_data		= ARRAY_SIZE(mityomapl138_aemif_abus_data),
-	.sub_devices		= mityomapl138_aemif_devices,
-	.num_sub_devices	= ARRAY_SIZE(mityomapl138_aemif_devices),
-};
-
-static struct platform_device mityomapl138_aemif_device = {
-	.name		= "ti-aemif",
-	.id		= -1,
-	.dev = {
-		.platform_data	= &mityomapl138_aemif_pdata,
-	},
-	.resource	= mityomapl138_aemif_resources,
-	.num_resources	= ARRAY_SIZE(mityomapl138_aemif_resources),
-};
-
-static void __init mityomapl138_setup_nand(void)
-{
-	if (platform_device_register(&mityomapl138_aemif_device))
-		pr_warn("%s: Cannot register AEMIF device\n", __func__);
-}
-
-static const short mityomap_mii_pins[] = {
-	DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
-	DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
-	DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3,
-	DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK,
-	DA850_MDIO_D,
-	-1
-};
-
-static const short mityomap_rmii_pins[] = {
-	DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN,
-	DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1,
-	DA850_RMII_RXER, DA850_RMII_MHZ_50_CLK, DA850_MDIO_CLK,
-	DA850_MDIO_D,
-	-1
-};
-
-static void __init mityomapl138_config_emac(void)
-{
-	void __iomem *cfg_chip3_base;
-	int ret;
-	u32 val;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	soc_info->emac_pdata->rmii_en = 0; /* hardcoded for now */
-
-	cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
-	val = __raw_readl(cfg_chip3_base);
-
-	if (soc_info->emac_pdata->rmii_en) {
-		val |= BIT(8);
-		ret = davinci_cfg_reg_list(mityomap_rmii_pins);
-		pr_info("RMII PHY configured\n");
-	} else {
-		val &= ~BIT(8);
-		ret = davinci_cfg_reg_list(mityomap_mii_pins);
-		pr_info("MII PHY configured\n");
-	}
-
-	if (ret) {
-		pr_warn("mii/rmii mux setup failed: %d\n", ret);
-		return;
-	}
-
-	/* configure the CFGCHIP3 register for RMII or MII */
-	__raw_writel(val, cfg_chip3_base);
-
-	soc_info->emac_pdata->phy_id = MITYOMAPL138_PHY_ID;
-
-	ret = da8xx_register_emac();
-	if (ret)
-		pr_warn("emac registration failed: %d\n", ret);
-}
-
-static void __init mityomapl138_init(void)
-{
-	int ret;
-
-	da850_register_clocks();
-
-	/* for now, no special EDMA channels are reserved */
-	ret = da850_register_edma(NULL);
-	if (ret)
-		pr_warn("edma registration failed: %d\n", ret);
-
-	ret = da8xx_register_watchdog();
-	if (ret)
-		pr_warn("watchdog registration failed: %d\n", ret);
-
-	davinci_serial_init(da8xx_serial_device);
-
-	nvmem_register_notifier(&mityomapl138_nvmem_notifier);
-	nvmem_add_cell_table(&mityomapl138_nvmem_cell_table);
-	nvmem_add_cell_lookups(&mityomapl138_nvmem_cell_lookup, 1);
-
-	ret = da8xx_register_i2c(0, &mityomap_i2c_0_pdata);
-	if (ret)
-		pr_warn("i2c0 registration failed: %d\n", ret);
-
-	ret = pmic_tps65023_init();
-	if (ret)
-		pr_warn("TPS65023 PMIC init failed: %d\n", ret);
-
-	mityomapl138_setup_nand();
-
-	ret = spi_register_board_info(mityomapl138_spi_flash_info,
-				      ARRAY_SIZE(mityomapl138_spi_flash_info));
-	if (ret)
-		pr_warn("spi info registration failed: %d\n", ret);
-
-	ret = da8xx_register_spi_bus(1,
-				     ARRAY_SIZE(mityomapl138_spi_flash_info));
-	if (ret)
-		pr_warn("spi 1 registration failed: %d\n", ret);
-
-	mityomapl138_config_emac();
-
-	ret = da8xx_register_rtc();
-	if (ret)
-		pr_warn("rtc setup failed: %d\n", ret);
-
-	ret = da8xx_register_cpuidle();
-	if (ret)
-		pr_warn("cpuidle registration failed: %d\n", ret);
-
-	davinci_pm_init();
-}
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-static int __init mityomapl138_console_init(void)
-{
-	if (!machine_is_mityomapl138())
-		return 0;
-
-	return add_preferred_console("ttyS", 1, "115200");
-}
-console_initcall(mityomapl138_console_init);
-#endif
-
-static void __init mityomapl138_map_io(void)
-{
-	da850_init();
-}
-
-MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808")
-	.atag_offset	= 0x100,
-	.map_io		= mityomapl138_map_io,
-	.init_irq	= da850_init_irq,
-	.init_time	= da850_init_time,
-	.init_machine	= mityomapl138_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
deleted file mode 100644
index 8a80115999ad..000000000000
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ /dev/null
@@ -1,451 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Hawkboard.org based on TI's OMAP-L138 Platform
- *
- * Initial code: Syed Mohammed Khasim
- *
- * Copyright (C) 2009 Texas Instruments Incorporated - https://www.ti.com
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mtd-davinci-aemif.h>
-#include <linux/platform_data/ti-aemif.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "da8xx.h"
-#include "mux.h"
-
-#define HAWKBOARD_PHY_ID		"davinci_mdio-0:07"
-
-#define DA850_USB1_VBUS_PIN		GPIO_TO_PIN(2, 4)
-#define DA850_USB1_OC_PIN		GPIO_TO_PIN(6, 13)
-
-static short omapl138_hawk_mii_pins[] __initdata = {
-	DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
-	DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
-	DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3,
-	DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK,
-	DA850_MDIO_D,
-	-1
-};
-
-static __init void omapl138_hawk_config_emac(void)
-{
-	void __iomem *cfgchip3 = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
-	int ret;
-	u32 val;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	val = __raw_readl(cfgchip3);
-	val &= ~BIT(8);
-	ret = davinci_cfg_reg_list(omapl138_hawk_mii_pins);
-	if (ret) {
-		pr_warn("%s: CPGMAC/MII mux setup failed: %d\n", __func__, ret);
-		return;
-	}
-
-	/* configure the CFGCHIP3 register for MII */
-	__raw_writel(val, cfgchip3);
-	pr_info("EMAC: MII PHY configured\n");
-
-	soc_info->emac_pdata->phy_id = HAWKBOARD_PHY_ID;
-
-	ret = da8xx_register_emac();
-	if (ret)
-		pr_warn("%s: EMAC registration failed: %d\n", __func__, ret);
-}
-
-/*
- * The following EDMA channels/slots are not being used by drivers (for
- * example: Timer, GPIO, UART events etc) on da850/omap-l138 EVM/Hawkboard,
- * hence they are being reserved for codecs on the DSP side.
- */
-static const s16 da850_dma0_rsv_chans[][2] = {
-	/* (offset, number) */
-	{ 8,  6},
-	{24,  4},
-	{30,  2},
-	{-1, -1}
-};
-
-static const s16 da850_dma0_rsv_slots[][2] = {
-	/* (offset, number) */
-	{ 8,  6},
-	{24,  4},
-	{30, 50},
-	{-1, -1}
-};
-
-static const s16 da850_dma1_rsv_chans[][2] = {
-	/* (offset, number) */
-	{ 0, 28},
-	{30,  2},
-	{-1, -1}
-};
-
-static const s16 da850_dma1_rsv_slots[][2] = {
-	/* (offset, number) */
-	{ 0, 28},
-	{30, 90},
-	{-1, -1}
-};
-
-static struct edma_rsv_info da850_edma_cc0_rsv = {
-	.rsv_chans	= da850_dma0_rsv_chans,
-	.rsv_slots	= da850_dma0_rsv_slots,
-};
-
-static struct edma_rsv_info da850_edma_cc1_rsv = {
-	.rsv_chans	= da850_dma1_rsv_chans,
-	.rsv_slots	= da850_dma1_rsv_slots,
-};
-
-static struct edma_rsv_info *da850_edma_rsv[2] = {
-	&da850_edma_cc0_rsv,
-	&da850_edma_cc1_rsv,
-};
-
-static const short hawk_mmcsd0_pins[] = {
-	DA850_MMCSD0_DAT_0, DA850_MMCSD0_DAT_1, DA850_MMCSD0_DAT_2,
-	DA850_MMCSD0_DAT_3, DA850_MMCSD0_CLK, DA850_MMCSD0_CMD,
-	DA850_GPIO3_12, DA850_GPIO3_13,
-	-1
-};
-
-#define DA850_HAWK_MMCSD_CD_PIN		GPIO_TO_PIN(3, 12)
-#define DA850_HAWK_MMCSD_WP_PIN		GPIO_TO_PIN(3, 13)
-
-static struct gpiod_lookup_table mmc_gpios_table = {
-	.dev_id = "da830-mmc.0",
-	.table = {
-		GPIO_LOOKUP("davinci_gpio", DA850_HAWK_MMCSD_CD_PIN, "cd",
-			    GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("davinci_gpio", DA850_HAWK_MMCSD_WP_PIN, "wp",
-			    GPIO_ACTIVE_LOW),
-	},
-};
-
-static struct davinci_mmc_config da850_mmc_config = {
-	.wires		= 4,
-	.max_freq	= 50000000,
-	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-};
-
-static __init void omapl138_hawk_mmc_init(void)
-{
-	int ret;
-
-	ret = davinci_cfg_reg_list(hawk_mmcsd0_pins);
-	if (ret) {
-		pr_warn("%s: MMC/SD0 mux setup failed: %d\n", __func__, ret);
-		return;
-	}
-
-	gpiod_add_lookup_table(&mmc_gpios_table);
-
-	ret = da8xx_register_mmcsd0(&da850_mmc_config);
-	if (ret) {
-		pr_warn("%s: MMC/SD0 registration failed: %d\n", __func__, ret);
-		goto mmc_setup_mmcsd_fail;
-	}
-
-	return;
-
-mmc_setup_mmcsd_fail:
-	gpiod_remove_lookup_table(&mmc_gpios_table);
-}
-
-static struct mtd_partition omapl138_hawk_nandflash_partition[] = {
-	{
-		.name		= "u-boot env",
-		.offset		= 0,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,
-	 },
-	{
-		.name		= "u-boot",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_512K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "free space",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	},
-};
-
-static struct davinci_aemif_timing omapl138_hawk_nandflash_timing = {
-	.wsetup		= 24,
-	.wstrobe	= 21,
-	.whold		= 14,
-	.rsetup		= 19,
-	.rstrobe	= 50,
-	.rhold		= 0,
-	.ta		= 20,
-};
-
-static struct davinci_nand_pdata omapl138_hawk_nandflash_data = {
-	.core_chipsel	= 1,
-	.parts		= omapl138_hawk_nandflash_partition,
-	.nr_parts	= ARRAY_SIZE(omapl138_hawk_nandflash_partition),
-	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
-	.ecc_bits	= 4,
-	.bbt_options	= NAND_BBT_USE_FLASH,
-	.options	= NAND_BUSWIDTH_16,
-	.timing		= &omapl138_hawk_nandflash_timing,
-	.mask_chipsel	= 0,
-	.mask_ale	= 0,
-	.mask_cle	= 0,
-};
-
-static struct resource omapl138_hawk_nandflash_resource[] = {
-	{
-		.start	= DA8XX_AEMIF_CS3_BASE,
-		.end	= DA8XX_AEMIF_CS3_BASE + SZ_32M,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DA8XX_AEMIF_CTL_BASE,
-		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct resource omapl138_hawk_aemif_resource[] = {
-	{
-		.start	= DA8XX_AEMIF_CTL_BASE,
-		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct aemif_abus_data omapl138_hawk_aemif_abus_data[] = {
-	{
-		.cs	= 3,
-	}
-};
-
-static struct platform_device omapl138_hawk_aemif_devices[] = {
-	{
-		.name		= "davinci_nand",
-		.id		= -1,
-		.dev		= {
-			.platform_data	= &omapl138_hawk_nandflash_data,
-		},
-		.resource	= omapl138_hawk_nandflash_resource,
-		.num_resources	= ARRAY_SIZE(omapl138_hawk_nandflash_resource),
-	}
-};
-
-static struct aemif_platform_data omapl138_hawk_aemif_pdata = {
-	.cs_offset = 2,
-	.abus_data = omapl138_hawk_aemif_abus_data,
-	.num_abus_data = ARRAY_SIZE(omapl138_hawk_aemif_abus_data),
-	.sub_devices = omapl138_hawk_aemif_devices,
-	.num_sub_devices = ARRAY_SIZE(omapl138_hawk_aemif_devices),
-};
-
-static struct platform_device omapl138_hawk_aemif_device = {
-	.name		= "ti-aemif",
-	.id		= -1,
-	.dev = {
-		.platform_data	= &omapl138_hawk_aemif_pdata,
-	},
-	.resource	= omapl138_hawk_aemif_resource,
-	.num_resources	= ARRAY_SIZE(omapl138_hawk_aemif_resource),
-};
-
-static const short omapl138_hawk_nand_pins[] = {
-	DA850_EMA_WAIT_1, DA850_NEMA_OE, DA850_NEMA_WE, DA850_NEMA_CS_3,
-	DA850_EMA_D_0, DA850_EMA_D_1, DA850_EMA_D_2, DA850_EMA_D_3,
-	DA850_EMA_D_4, DA850_EMA_D_5, DA850_EMA_D_6, DA850_EMA_D_7,
-	DA850_EMA_D_8, DA850_EMA_D_9, DA850_EMA_D_10, DA850_EMA_D_11,
-	DA850_EMA_D_12, DA850_EMA_D_13, DA850_EMA_D_14, DA850_EMA_D_15,
-	DA850_EMA_A_1, DA850_EMA_A_2,
-	-1
-};
-
-static int omapl138_hawk_register_aemif(void)
-{
-	int ret;
-
-	ret = davinci_cfg_reg_list(omapl138_hawk_nand_pins);
-	if (ret)
-		pr_warn("%s: NAND mux setup failed: %d\n", __func__, ret);
-
-	return platform_device_register(&omapl138_hawk_aemif_device);
-}
-
-static const short da850_hawk_usb11_pins[] = {
-	DA850_GPIO2_4, DA850_GPIO6_13,
-	-1
-};
-
-static struct regulator_consumer_supply hawk_usb_supplies[] = {
-	REGULATOR_SUPPLY("vbus", NULL),
-};
-
-static struct regulator_init_data hawk_usb_vbus_data = {
-	.consumer_supplies	= hawk_usb_supplies,
-	.num_consumer_supplies	= ARRAY_SIZE(hawk_usb_supplies),
-	.constraints    = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct fixed_voltage_config hawk_usb_vbus = {
-	.supply_name		= "vbus",
-	.microvolts		= 3300000,
-	.init_data		= &hawk_usb_vbus_data,
-};
-
-static struct platform_device hawk_usb_vbus_device = {
-	.name		= "reg-fixed-voltage",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &hawk_usb_vbus,
-	},
-};
-
-static struct gpiod_lookup_table hawk_usb_oc_gpio_lookup = {
-	.dev_id		= "ohci-da8xx",
-	.table = {
-		GPIO_LOOKUP("davinci_gpio", DA850_USB1_OC_PIN, "oc", 0),
-		{ }
-	},
-};
-
-static struct gpiod_lookup_table hawk_usb_vbus_gpio_lookup = {
-	.dev_id		= "reg-fixed-voltage.0",
-	.table = {
-		GPIO_LOOKUP("davinci_gpio", DA850_USB1_VBUS_PIN, NULL, 0),
-		{ }
-	},
-};
-
-static struct gpiod_lookup_table *hawk_usb_gpio_lookups[] = {
-	&hawk_usb_oc_gpio_lookup,
-	&hawk_usb_vbus_gpio_lookup,
-};
-
-static struct da8xx_ohci_root_hub omapl138_hawk_usb11_pdata = {
-	/* TPS2087 switch @ 5V */
-	.potpgt         = (3 + 1) / 2,  /* 3 ms max */
-};
-
-static __init void omapl138_hawk_usb_init(void)
-{
-	int ret;
-
-	ret = davinci_cfg_reg_list(da850_hawk_usb11_pins);
-	if (ret) {
-		pr_warn("%s: USB 1.1 PinMux setup failed: %d\n", __func__, ret);
-		return;
-	}
-
-	ret = da8xx_register_usb_phy_clocks();
-	if (ret)
-		pr_warn("%s: USB PHY CLK registration failed: %d\n",
-			__func__, ret);
-
-	gpiod_add_lookup_tables(hawk_usb_gpio_lookups,
-				ARRAY_SIZE(hawk_usb_gpio_lookups));
-
-	ret = da8xx_register_usb_phy();
-	if (ret)
-		pr_warn("%s: USB PHY registration failed: %d\n",
-			__func__, ret);
-
-	ret = platform_device_register(&hawk_usb_vbus_device);
-	if (ret) {
-		pr_warn("%s: Unable to register the vbus supply\n", __func__);
-		return;
-	}
-
-	ret = da8xx_register_usb11(&omapl138_hawk_usb11_pdata);
-	if (ret)
-		pr_warn("%s: USB 1.1 registration failed: %d\n", __func__, ret);
-
-	return;
-}
-
-static __init void omapl138_hawk_init(void)
-{
-	int ret;
-
-	da850_register_clocks();
-
-	ret = da850_register_gpio();
-	if (ret)
-		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
-
-	davinci_serial_init(da8xx_serial_device);
-
-	omapl138_hawk_config_emac();
-
-	ret = da850_register_edma(da850_edma_rsv);
-	if (ret)
-		pr_warn("%s: EDMA registration failed: %d\n", __func__, ret);
-
-	omapl138_hawk_mmc_init();
-
-	omapl138_hawk_usb_init();
-
-	ret = omapl138_hawk_register_aemif();
-	if (ret)
-		pr_warn("%s: aemif registration failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_watchdog();
-	if (ret)
-		pr_warn("%s: watchdog registration failed: %d\n",
-			__func__, ret);
-
-	ret = da8xx_register_rproc();
-	if (ret)
-		pr_warn("%s: dsp/rproc registration failed: %d\n",
-			__func__, ret);
-
-	regulator_has_full_constraints();
-}
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-static int __init omapl138_hawk_console_init(void)
-{
-	if (!machine_is_omapl138_hawkboard())
-		return 0;
-
-	return add_preferred_console("ttyS", 2, "115200");
-}
-console_initcall(omapl138_hawk_console_init);
-#endif
-
-static void __init omapl138_hawk_map_io(void)
-{
-	da850_init();
-}
-
-MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard")
-	.atag_offset	= 0x100,
-	.map_io		= omapl138_hawk_map_io,
-	.init_irq	= da850_init_irq,
-	.init_time	= da850_init_time,
-	.init_machine	= omapl138_hawk_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-	.reserve	= da8xx_rproc_reserve_cma,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
deleted file mode 100644
index 199c26d9a2b6..000000000000
--- a/arch/arm/mach-davinci/devices.c
+++ /dev/null
@@ -1,303 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * mach-davinci/devices.c
- *
- * DaVinci platform device setup/initialization
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/i2c-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/edma.h>
-#include <linux/dma-mapping.h>
-#include <linux/io.h>
-#include <linux/reboot.h>
-
-#include "hardware.h"
-#include "cputype.h"
-#include "mux.h"
-#include "davinci.h"
-#include "irqs.h"
-
-#define DAVINCI_I2C_BASE	     0x01C21000
-#define DAVINCI_ATA_BASE	     0x01C66000
-#define DAVINCI_MMCSD0_BASE	     0x01E10000
-#define DM355_MMCSD0_BASE	     0x01E11000
-#define DM355_MMCSD1_BASE	     0x01E00000
-#define DM365_MMCSD0_BASE	     0x01D11000
-#define DM365_MMCSD1_BASE	     0x01D00000
-
-void __iomem  *davinci_sysmod_base;
-
-void davinci_map_sysmod(void)
-{
-	davinci_sysmod_base = ioremap(DAVINCI_SYSTEM_MODULE_BASE,
-					      0x800);
-	/*
-	 * Throw a bug since a lot of board initialization code depends
-	 * on system module availability. ioremap() failing this early
-	 * need careful looking into anyway.
-	 */
-	BUG_ON(!davinci_sysmod_base);
-}
-
-static struct resource i2c_resources[] = {
-	{
-		.start		= DAVINCI_I2C_BASE,
-		.end		= DAVINCI_I2C_BASE + 0x40,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= DAVINCI_INTC_IRQ(IRQ_I2C),
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device davinci_i2c_device = {
-	.name           = "i2c_davinci",
-	.id             = 1,
-	.num_resources	= ARRAY_SIZE(i2c_resources),
-	.resource	= i2c_resources,
-};
-
-void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata)
-{
-	if (cpu_is_davinci_dm644x())
-		davinci_cfg_reg(DM644X_I2C);
-
-	davinci_i2c_device.dev.platform_data = pdata;
-	(void) platform_device_register(&davinci_i2c_device);
-}
-
-static struct resource ide_resources[] = {
-	{
-		.start		= DAVINCI_ATA_BASE,
-		.end		= DAVINCI_ATA_BASE + 0x7ff,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= DAVINCI_INTC_IRQ(IRQ_IDE),
-		.end		= DAVINCI_INTC_IRQ(IRQ_IDE),
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static u64 ide_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ide_device = {
-	.name           = "palm_bk3710",
-	.id             = -1,
-	.resource       = ide_resources,
-	.num_resources  = ARRAY_SIZE(ide_resources),
-	.dev = {
-		.dma_mask		= &ide_dma_mask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-	},
-};
-
-void __init davinci_init_ide(void)
-{
-	if (cpu_is_davinci_dm644x()) {
-		davinci_cfg_reg(DM644X_HPIEN_DISABLE);
-		davinci_cfg_reg(DM644X_ATAEN);
-		davinci_cfg_reg(DM644X_HDIREN);
-	} else if (cpu_is_davinci_dm646x()) {
-		/* IRQ_DM646X_IDE is the same as IRQ_IDE */
-		davinci_cfg_reg(DM646X_ATAEN);
-	} else {
-		WARN_ON(1);
-		return;
-	}
-
-	platform_device_register(&ide_device);
-}
-
-#if IS_ENABLED(CONFIG_MMC_DAVINCI)
-
-static u64 mmcsd0_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource mmcsd0_resources[] = {
-	{
-		/* different on dm355 */
-		.start = DAVINCI_MMCSD0_BASE,
-		.end   = DAVINCI_MMCSD0_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	/* IRQs:  MMC/SD, then SDIO */
-	{
-		.start = DAVINCI_INTC_IRQ(IRQ_MMCINT),
-		.flags = IORESOURCE_IRQ,
-	}, {
-		/* different on dm355 */
-		.start = DAVINCI_INTC_IRQ(IRQ_SDIOINT),
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device davinci_mmcsd0_device = {
-	.name = "dm6441-mmc",
-	.id = 0,
-	.dev = {
-		.dma_mask = &mmcsd0_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.num_resources = ARRAY_SIZE(mmcsd0_resources),
-	.resource = mmcsd0_resources,
-};
-
-static u64 mmcsd1_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource mmcsd1_resources[] = {
-	{
-		.start = DM355_MMCSD1_BASE,
-		.end   = DM355_MMCSD1_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	/* IRQs:  MMC/SD, then SDIO */
-	{
-		.start = DAVINCI_INTC_IRQ(IRQ_DM355_MMCINT1),
-		.flags = IORESOURCE_IRQ,
-	}, {
-		.start = DAVINCI_INTC_IRQ(IRQ_DM355_SDIOINT1),
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device davinci_mmcsd1_device = {
-	.name = "dm6441-mmc",
-	.id = 1,
-	.dev = {
-		.dma_mask = &mmcsd1_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.num_resources = ARRAY_SIZE(mmcsd1_resources),
-	.resource = mmcsd1_resources,
-};
-
-
-void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
-{
-	struct platform_device	*pdev = NULL;
-
-	if (WARN_ON(cpu_is_davinci_dm646x()))
-		return;
-
-	/* REVISIT: update PINMUX, ARM_IRQMUX, and EDMA_EVTMUX here too;
-	 * for example if MMCSD1 is used for SDIO, maybe DAT2 is unused.
-	 *
-	 * FIXME dm6441 (no MMC/SD), dm357 (one), and dm335 (two) are
-	 * not handled right here ...
-	 */
-	switch (module) {
-	case 1:
-		if (cpu_is_davinci_dm355()) {
-			/* REVISIT we may not need all these pins if e.g. this
-			 * is a hard-wired SDIO device...
-			 */
-			davinci_cfg_reg(DM355_SD1_CMD);
-			davinci_cfg_reg(DM355_SD1_CLK);
-			davinci_cfg_reg(DM355_SD1_DATA0);
-			davinci_cfg_reg(DM355_SD1_DATA1);
-			davinci_cfg_reg(DM355_SD1_DATA2);
-			davinci_cfg_reg(DM355_SD1_DATA3);
-		} else if (cpu_is_davinci_dm365()) {
-			/* Configure pull down control */
-			unsigned v;
-
-			v = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_PUPDCTL1));
-			__raw_writel(v & ~0xfc0,
-					DAVINCI_SYSMOD_VIRT(SYSMOD_PUPDCTL1));
-
-			mmcsd1_resources[0].start = DM365_MMCSD1_BASE;
-			mmcsd1_resources[0].end = DM365_MMCSD1_BASE +
-							SZ_4K - 1;
-			mmcsd1_resources[2].start = DAVINCI_INTC_IRQ(
-							IRQ_DM365_SDIOINT1);
-			davinci_mmcsd1_device.name = "da830-mmc";
-		} else
-			break;
-
-		pdev = &davinci_mmcsd1_device;
-		break;
-	case 0:
-		if (cpu_is_davinci_dm355()) {
-			mmcsd0_resources[0].start = DM355_MMCSD0_BASE;
-			mmcsd0_resources[0].end = DM355_MMCSD0_BASE + SZ_4K - 1;
-			mmcsd0_resources[2].start = DAVINCI_INTC_IRQ(
-							IRQ_DM355_SDIOINT0);
-
-			/* expose all 6 MMC0 signals:  CLK, CMD, DATA[0..3] */
-			davinci_cfg_reg(DM355_MMCSD0);
-
-			/* enable RX EDMA */
-			davinci_cfg_reg(DM355_EVT26_MMC0_RX);
-		} else if (cpu_is_davinci_dm365()) {
-			mmcsd0_resources[0].start = DM365_MMCSD0_BASE;
-			mmcsd0_resources[0].end = DM365_MMCSD0_BASE +
-							SZ_4K - 1;
-			mmcsd0_resources[2].start = DAVINCI_INTC_IRQ(
-							IRQ_DM365_SDIOINT0);
-			davinci_mmcsd0_device.name = "da830-mmc";
-		} else if (cpu_is_davinci_dm644x()) {
-			/* REVISIT: should this be in board-init code? */
-			/* Power-on 3.3V IO cells */
-			__raw_writel(0,
-				DAVINCI_SYSMOD_VIRT(SYSMOD_VDD3P3VPWDN));
-			/*Set up the pull regiter for MMC */
-			davinci_cfg_reg(DM644X_MSTK);
-		}
-
-		pdev = &davinci_mmcsd0_device;
-		break;
-	}
-
-	if (WARN_ON(!pdev))
-		return;
-
-	pdev->dev.platform_data = config;
-	platform_device_register(pdev);
-}
-
-#else
-
-void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
-{
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-static struct resource wdt_resources[] = {
-	{
-		.start	= DAVINCI_WDOG_BASE,
-		.end	= DAVINCI_WDOG_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device davinci_wdt_device = {
-	.name		= "davinci-wdt",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(wdt_resources),
-	.resource	= wdt_resources,
-};
-
-int davinci_init_wdt(void)
-{
-	return platform_device_register(&davinci_wdt_device);
-}
-
-static struct platform_device davinci_gpio_device = {
-	.name	= "davinci_gpio",
-	.id	= -1,
-};
-
-int davinci_gpio_register(struct resource *res, int size, void *pdata)
-{
-	davinci_gpio_device.resource = res;
-	davinci_gpio_device.num_resources = size;
-	davinci_gpio_device.dev.platform_data = pdata;
-	return platform_device_register(&davinci_gpio_device);
-}
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
deleted file mode 100644
index a12ba859beca..000000000000
--- a/arch/arm/mach-davinci/dm355.c
+++ /dev/null
@@ -1,832 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * TI DaVinci DM355 chip specific setup
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * 2007 (c) Deep Root Systems, LLC.
- */
-
-#include <linux/clk-provider.h>
-#include <linux/clk/davinci.h>
-#include <linux/clkdev.h>
-#include <linux/dma-mapping.h>
-#include <linux/dmaengine.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irqchip/irq-davinci-aintc.h>
-#include <linux/platform_data/edma.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_data/spi-davinci.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/spi/spi.h>
-
-#include <clocksource/timer-davinci.h>
-
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "cputype.h"
-#include "serial.h"
-#include "asp.h"
-#include "davinci.h"
-#include "irqs.h"
-#include "mux.h"
-
-#define DM355_UART2_BASE	(IO_PHYS + 0x206000)
-#define DM355_OSD_BASE		(IO_PHYS + 0x70200)
-#define DM355_VENC_BASE		(IO_PHYS + 0x70400)
-
-/*
- * Device specific clocks
- */
-#define DM355_REF_FREQ		24000000	/* 24 or 36 MHz */
-
-static u64 dm355_spi0_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource dm355_spi0_resources[] = {
-	{
-		.start = 0x01c66000,
-		.end   = 0x01c667ff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = DAVINCI_INTC_IRQ(IRQ_DM355_SPINT0_0),
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct davinci_spi_platform_data dm355_spi0_pdata = {
-	.version 	= SPI_VERSION_1,
-	.num_chipselect = 2,
-	.cshold_bug	= true,
-	.dma_event_q	= EVENTQ_1,
-	.prescaler_limit = 1,
-};
-static struct platform_device dm355_spi0_device = {
-	.name = "spi_davinci",
-	.id = 0,
-	.dev = {
-		.dma_mask = &dm355_spi0_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &dm355_spi0_pdata,
-	},
-	.num_resources = ARRAY_SIZE(dm355_spi0_resources),
-	.resource = dm355_spi0_resources,
-};
-
-void __init dm355_init_spi0(unsigned chipselect_mask,
-		const struct spi_board_info *info, unsigned len)
-{
-	/* for now, assume we need MISO */
-	davinci_cfg_reg(DM355_SPI0_SDI);
-
-	/* not all slaves will be wired up */
-	if (chipselect_mask & BIT(0))
-		davinci_cfg_reg(DM355_SPI0_SDENA0);
-	if (chipselect_mask & BIT(1))
-		davinci_cfg_reg(DM355_SPI0_SDENA1);
-
-	spi_register_board_info(info, len);
-
-	platform_device_register(&dm355_spi0_device);
-}
-
-/*----------------------------------------------------------------------*/
-
-#define INTMUX		0x18
-#define EVTMUX		0x1c
-
-/*
- * Device specific mux setup
- *
- *	soc	description	mux  mode   mode  mux	 dbg
- *				reg  offset mask  mode
- */
-static const struct mux_config dm355_pins[] = {
-#ifdef CONFIG_DAVINCI_MUX
-MUX_CFG(DM355,	MMCSD0,		4,   2,     1,	  0,	 false)
-
-MUX_CFG(DM355,	SD1_CLK,	3,   6,     1,	  1,	 false)
-MUX_CFG(DM355,	SD1_CMD,	3,   7,     1,	  1,	 false)
-MUX_CFG(DM355,	SD1_DATA3,	3,   8,     3,	  1,	 false)
-MUX_CFG(DM355,	SD1_DATA2,	3,   10,    3,	  1,	 false)
-MUX_CFG(DM355,	SD1_DATA1,	3,   12,    3,	  1,	 false)
-MUX_CFG(DM355,	SD1_DATA0,	3,   14,    3,	  1,	 false)
-
-MUX_CFG(DM355,	I2C_SDA,	3,   19,    1,	  1,	 false)
-MUX_CFG(DM355,	I2C_SCL,	3,   20,    1,	  1,	 false)
-
-MUX_CFG(DM355,	MCBSP0_BDX,	3,   0,     1,	  1,	 false)
-MUX_CFG(DM355,	MCBSP0_X,	3,   1,     1,	  1,	 false)
-MUX_CFG(DM355,	MCBSP0_BFSX,	3,   2,     1,	  1,	 false)
-MUX_CFG(DM355,	MCBSP0_BDR,	3,   3,     1,	  1,	 false)
-MUX_CFG(DM355,	MCBSP0_R,	3,   4,     1,	  1,	 false)
-MUX_CFG(DM355,	MCBSP0_BFSR,	3,   5,     1,	  1,	 false)
-
-MUX_CFG(DM355,	SPI0_SDI,	4,   1,     1,    0,	 false)
-MUX_CFG(DM355,	SPI0_SDENA0,	4,   0,     1,    0,	 false)
-MUX_CFG(DM355,	SPI0_SDENA1,	3,   28,    1,    1,	 false)
-
-INT_CFG(DM355,  INT_EDMA_CC,	      2,    1,    1,     false)
-INT_CFG(DM355,  INT_EDMA_TC0_ERR,     3,    1,    1,     false)
-INT_CFG(DM355,  INT_EDMA_TC1_ERR,     4,    1,    1,     false)
-
-EVT_CFG(DM355,  EVT8_ASP1_TX,	      0,    1,    0,     false)
-EVT_CFG(DM355,  EVT9_ASP1_RX,	      1,    1,    0,     false)
-EVT_CFG(DM355,  EVT26_MMC0_RX,	      2,    1,    0,     false)
-
-MUX_CFG(DM355,	VOUT_FIELD,	1,   18,    3,	  1,	 false)
-MUX_CFG(DM355,	VOUT_FIELD_G70,	1,   18,    3,	  0,	 false)
-MUX_CFG(DM355,	VOUT_HVSYNC,	1,   16,    1,	  0,	 false)
-MUX_CFG(DM355,	VOUT_COUTL_EN,	1,   0,     0xff, 0x55,  false)
-MUX_CFG(DM355,	VOUT_COUTH_EN,	1,   8,     0xff, 0x55,  false)
-
-MUX_CFG(DM355,	VIN_PCLK,	0,   14,    1,    1,	 false)
-MUX_CFG(DM355,	VIN_CAM_WEN,	0,   13,    1,    1,	 false)
-MUX_CFG(DM355,	VIN_CAM_VD,	0,   12,    1,    1,	 false)
-MUX_CFG(DM355,	VIN_CAM_HD,	0,   11,    1,    1,	 false)
-MUX_CFG(DM355,	VIN_YIN_EN,	0,   10,    1,    1,	 false)
-MUX_CFG(DM355,	VIN_CINL_EN,	0,   0,   0xff, 0x55,	 false)
-MUX_CFG(DM355,	VIN_CINH_EN,	0,   8,     3,    3,	 false)
-#endif
-};
-
-static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
-	[IRQ_DM355_CCDC_VDINT0]		= 2,
-	[IRQ_DM355_CCDC_VDINT1]		= 6,
-	[IRQ_DM355_CCDC_VDINT2]		= 6,
-	[IRQ_DM355_IPIPE_HST]		= 6,
-	[IRQ_DM355_H3AINT]		= 6,
-	[IRQ_DM355_IPIPE_SDR]		= 6,
-	[IRQ_DM355_IPIPEIFINT]		= 6,
-	[IRQ_DM355_OSDINT]		= 7,
-	[IRQ_DM355_VENCINT]		= 6,
-	[IRQ_ASQINT]			= 6,
-	[IRQ_IMXINT]			= 6,
-	[IRQ_USBINT]			= 4,
-	[IRQ_DM355_RTOINT]		= 4,
-	[IRQ_DM355_UARTINT2]		= 7,
-	[IRQ_DM355_TINT6]		= 7,
-	[IRQ_CCINT0]			= 5,	/* dma */
-	[IRQ_CCERRINT]			= 5,	/* dma */
-	[IRQ_TCERRINT0]			= 5,	/* dma */
-	[IRQ_TCERRINT]			= 5,	/* dma */
-	[IRQ_DM355_SPINT2_1]		= 7,
-	[IRQ_DM355_TINT7]		= 4,
-	[IRQ_DM355_SDIOINT0]		= 7,
-	[IRQ_MBXINT]			= 7,
-	[IRQ_MBRINT]			= 7,
-	[IRQ_MMCINT]			= 7,
-	[IRQ_DM355_MMCINT1]		= 7,
-	[IRQ_DM355_PWMINT3]		= 7,
-	[IRQ_DDRINT]			= 7,
-	[IRQ_AEMIFINT]			= 7,
-	[IRQ_DM355_SDIOINT1]		= 4,
-	[IRQ_TINT0_TINT12]		= 2,	/* clockevent */
-	[IRQ_TINT0_TINT34]		= 2,	/* clocksource */
-	[IRQ_TINT1_TINT12]		= 7,	/* DSP timer */
-	[IRQ_TINT1_TINT34]		= 7,	/* system tick */
-	[IRQ_PWMINT0]			= 7,
-	[IRQ_PWMINT1]			= 7,
-	[IRQ_PWMINT2]			= 7,
-	[IRQ_I2C]			= 3,
-	[IRQ_UARTINT0]			= 3,
-	[IRQ_UARTINT1]			= 3,
-	[IRQ_DM355_SPINT0_0]		= 3,
-	[IRQ_DM355_SPINT0_1]		= 3,
-	[IRQ_DM355_GPIO0]		= 3,
-	[IRQ_DM355_GPIO1]		= 7,
-	[IRQ_DM355_GPIO2]		= 4,
-	[IRQ_DM355_GPIO3]		= 4,
-	[IRQ_DM355_GPIO4]		= 7,
-	[IRQ_DM355_GPIO5]		= 7,
-	[IRQ_DM355_GPIO6]		= 7,
-	[IRQ_DM355_GPIO7]		= 7,
-	[IRQ_DM355_GPIO8]		= 7,
-	[IRQ_DM355_GPIO9]		= 7,
-	[IRQ_DM355_GPIOBNK0]		= 7,
-	[IRQ_DM355_GPIOBNK1]		= 7,
-	[IRQ_DM355_GPIOBNK2]		= 7,
-	[IRQ_DM355_GPIOBNK3]		= 7,
-	[IRQ_DM355_GPIOBNK4]		= 7,
-	[IRQ_DM355_GPIOBNK5]		= 7,
-	[IRQ_DM355_GPIOBNK6]		= 7,
-	[IRQ_COMMTX]			= 7,
-	[IRQ_COMMRX]			= 7,
-	[IRQ_EMUINT]			= 7,
-};
-
-/*----------------------------------------------------------------------*/
-
-static s8 queue_priority_mapping[][2] = {
-	/* {event queue no, Priority} */
-	{0, 3},
-	{1, 7},
-	{-1, -1},
-};
-
-static const struct dma_slave_map dm355_edma_map[] = {
-	{ "davinci-mcbsp.0", "tx", EDMA_FILTER_PARAM(0, 2) },
-	{ "davinci-mcbsp.0", "rx", EDMA_FILTER_PARAM(0, 3) },
-	{ "davinci-mcbsp.1", "tx", EDMA_FILTER_PARAM(0, 8) },
-	{ "davinci-mcbsp.1", "rx", EDMA_FILTER_PARAM(0, 9) },
-	{ "spi_davinci.2", "tx", EDMA_FILTER_PARAM(0, 10) },
-	{ "spi_davinci.2", "rx", EDMA_FILTER_PARAM(0, 11) },
-	{ "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 14) },
-	{ "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 15) },
-	{ "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 16) },
-	{ "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 17) },
-	{ "dm6441-mmc.0", "rx", EDMA_FILTER_PARAM(0, 26) },
-	{ "dm6441-mmc.0", "tx", EDMA_FILTER_PARAM(0, 27) },
-	{ "dm6441-mmc.1", "rx", EDMA_FILTER_PARAM(0, 30) },
-	{ "dm6441-mmc.1", "tx", EDMA_FILTER_PARAM(0, 31) },
-};
-
-static struct edma_soc_info dm355_edma_pdata = {
-	.queue_priority_mapping	= queue_priority_mapping,
-	.default_queue		= EVENTQ_1,
-	.slave_map		= dm355_edma_map,
-	.slavecnt		= ARRAY_SIZE(dm355_edma_map),
-};
-
-static struct resource edma_resources[] = {
-	{
-		.name	= "edma3_cc",
-		.start	= 0x01c00000,
-		.end	= 0x01c00000 + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc0",
-		.start	= 0x01c10000,
-		.end	= 0x01c10000 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc1",
-		.start	= 0x01c10400,
-		.end	= 0x01c10400 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_ccint",
-		.start	= DAVINCI_INTC_IRQ(IRQ_CCINT0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "edma3_ccerrint",
-		.start	= DAVINCI_INTC_IRQ(IRQ_CCERRINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-	/* not using (or muxing) TC*_ERR */
-};
-
-static const struct platform_device_info dm355_edma_device __initconst = {
-	.name		= "edma",
-	.id		= 0,
-	.dma_mask	= DMA_BIT_MASK(32),
-	.res		= edma_resources,
-	.num_res	= ARRAY_SIZE(edma_resources),
-	.data		= &dm355_edma_pdata,
-	.size_data	= sizeof(dm355_edma_pdata),
-};
-
-static struct resource dm355_asp1_resources[] = {
-	{
-		.name	= "mpu",
-		.start	= DAVINCI_ASP1_BASE,
-		.end	= DAVINCI_ASP1_BASE + SZ_8K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DAVINCI_DMA_ASP1_TX,
-		.end	= DAVINCI_DMA_ASP1_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	{
-		.start	= DAVINCI_DMA_ASP1_RX,
-		.end	= DAVINCI_DMA_ASP1_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device dm355_asp1_device = {
-	.name		= "davinci-mcbsp",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(dm355_asp1_resources),
-	.resource	= dm355_asp1_resources,
-};
-
-static void dm355_ccdc_setup_pinmux(void)
-{
-	davinci_cfg_reg(DM355_VIN_PCLK);
-	davinci_cfg_reg(DM355_VIN_CAM_WEN);
-	davinci_cfg_reg(DM355_VIN_CAM_VD);
-	davinci_cfg_reg(DM355_VIN_CAM_HD);
-	davinci_cfg_reg(DM355_VIN_YIN_EN);
-	davinci_cfg_reg(DM355_VIN_CINL_EN);
-	davinci_cfg_reg(DM355_VIN_CINH_EN);
-}
-
-static struct resource dm355_vpss_resources[] = {
-	{
-		/* VPSS BL Base address */
-		.name		= "vpss",
-		.start          = 0x01c70800,
-		.end            = 0x01c70800 + 0xff,
-		.flags          = IORESOURCE_MEM,
-	},
-	{
-		/* VPSS CLK Base address */
-		.name		= "vpss",
-		.start          = 0x01c70000,
-		.end            = 0x01c70000 + 0xf,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm355_vpss_device = {
-	.name			= "vpss",
-	.id			= -1,
-	.dev.platform_data	= "dm355_vpss",
-	.num_resources		= ARRAY_SIZE(dm355_vpss_resources),
-	.resource		= dm355_vpss_resources,
-};
-
-static struct resource vpfe_resources[] = {
-	{
-		.start          = DAVINCI_INTC_IRQ(IRQ_VDINT0),
-		.end            = DAVINCI_INTC_IRQ(IRQ_VDINT0),
-		.flags          = IORESOURCE_IRQ,
-	},
-	{
-		.start          = DAVINCI_INTC_IRQ(IRQ_VDINT1),
-		.end            = DAVINCI_INTC_IRQ(IRQ_VDINT1),
-		.flags          = IORESOURCE_IRQ,
-	},
-};
-
-static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
-static struct resource dm355_ccdc_resource[] = {
-	/* CCDC Base address */
-	{
-		.flags          = IORESOURCE_MEM,
-		.start          = 0x01c70600,
-		.end            = 0x01c70600 + 0x1ff,
-	},
-};
-static struct platform_device dm355_ccdc_dev = {
-	.name           = "dm355_ccdc",
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(dm355_ccdc_resource),
-	.resource       = dm355_ccdc_resource,
-	.dev = {
-		.dma_mask               = &vpfe_capture_dma_mask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-		.platform_data		= dm355_ccdc_setup_pinmux,
-	},
-};
-
-static struct platform_device vpfe_capture_dev = {
-	.name		= CAPTURE_DRV_NAME,
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(vpfe_resources),
-	.resource	= vpfe_resources,
-	.dev = {
-		.dma_mask		= &vpfe_capture_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-static struct resource dm355_osd_resources[] = {
-	{
-		.start	= DM355_OSD_BASE,
-		.end	= DM355_OSD_BASE + 0x17f,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm355_osd_dev = {
-	.name		= DM355_VPBE_OSD_SUBDEV_NAME,
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm355_osd_resources),
-	.resource	= dm355_osd_resources,
-	.dev		= {
-		.dma_mask		= &vpfe_capture_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-static struct resource dm355_venc_resources[] = {
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_VENCINT),
-		.end	= DAVINCI_INTC_IRQ(IRQ_VENCINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-	/* venc registers io space */
-	{
-		.start	= DM355_VENC_BASE,
-		.end	= DM355_VENC_BASE + 0x17f,
-		.flags	= IORESOURCE_MEM,
-	},
-	/* VDAC config register io space */
-	{
-		.start	= DAVINCI_SYSTEM_MODULE_BASE + SYSMOD_VDAC_CONFIG,
-		.end	= DAVINCI_SYSTEM_MODULE_BASE + SYSMOD_VDAC_CONFIG + 3,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct resource dm355_v4l2_disp_resources[] = {
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_VENCINT),
-		.end	= DAVINCI_INTC_IRQ(IRQ_VENCINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-	/* venc registers io space */
-	{
-		.start	= DM355_VENC_BASE,
-		.end	= DM355_VENC_BASE + 0x17f,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static int dm355_vpbe_setup_pinmux(u32 if_type, int field)
-{
-	switch (if_type) {
-	case MEDIA_BUS_FMT_SGRBG8_1X8:
-		davinci_cfg_reg(DM355_VOUT_FIELD_G70);
-		break;
-	case MEDIA_BUS_FMT_YUYV10_1X20:
-		if (field)
-			davinci_cfg_reg(DM355_VOUT_FIELD);
-		else
-			davinci_cfg_reg(DM355_VOUT_FIELD_G70);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	davinci_cfg_reg(DM355_VOUT_COUTL_EN);
-	davinci_cfg_reg(DM355_VOUT_COUTH_EN);
-
-	return 0;
-}
-
-static int dm355_venc_setup_clock(enum vpbe_enc_timings_type type,
-				   unsigned int pclock)
-{
-	void __iomem *vpss_clk_ctrl_reg;
-
-	vpss_clk_ctrl_reg = DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL);
-
-	switch (type) {
-	case VPBE_ENC_STD:
-		writel(VPSS_DACCLKEN_ENABLE | VPSS_VENCCLKEN_ENABLE,
-		       vpss_clk_ctrl_reg);
-		break;
-	case VPBE_ENC_DV_TIMINGS:
-		if (pclock > 27000000)
-			/*
-			 * For HD, use external clock source since we cannot
-			 * support HD mode with internal clocks.
-			 */
-			writel(VPSS_MUXSEL_EXTCLK_ENABLE, vpss_clk_ctrl_reg);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static struct platform_device dm355_vpbe_display = {
-	.name		= "vpbe-v4l2",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm355_v4l2_disp_resources),
-	.resource	= dm355_v4l2_disp_resources,
-	.dev		= {
-		.dma_mask		= &vpfe_capture_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-static struct venc_platform_data dm355_venc_pdata = {
-	.setup_pinmux	= dm355_vpbe_setup_pinmux,
-	.setup_clock	= dm355_venc_setup_clock,
-};
-
-static struct platform_device dm355_venc_dev = {
-	.name		= DM355_VPBE_VENC_SUBDEV_NAME,
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm355_venc_resources),
-	.resource	= dm355_venc_resources,
-	.dev		= {
-		.dma_mask		= &vpfe_capture_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= (void *)&dm355_venc_pdata,
-	},
-};
-
-static struct platform_device dm355_vpbe_dev = {
-	.name		= "vpbe_controller",
-	.id		= -1,
-	.dev		= {
-		.dma_mask		= &vpfe_capture_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-static struct resource dm355_gpio_resources[] = {
-	{	/* registers */
-		.start	= DAVINCI_GPIO_BASE,
-		.end	= DAVINCI_GPIO_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{	/* interrupt */
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK0),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK1),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK1),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK2),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK2),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK3),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK3),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK4),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK4),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK5),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK5),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK6),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK6),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct davinci_gpio_platform_data dm355_gpio_platform_data = {
-	.no_auto_base	= true,
-	.base		= 0,
-	.ngpio		= 104,
-};
-
-int __init dm355_gpio_register(void)
-{
-	return davinci_gpio_register(dm355_gpio_resources,
-				     ARRAY_SIZE(dm355_gpio_resources),
-				     &dm355_gpio_platform_data);
-}
-/*----------------------------------------------------------------------*/
-
-static struct map_desc dm355_io_desc[] = {
-	{
-		.virtual	= IO_VIRT,
-		.pfn		= __phys_to_pfn(IO_PHYS),
-		.length		= IO_SIZE,
-		.type		= MT_DEVICE
-	},
-};
-
-/* Contents of JTAG ID register used to identify exact cpu type */
-static struct davinci_id dm355_ids[] = {
-	{
-		.variant	= 0x0,
-		.part_no	= 0xb73b,
-		.manufacturer	= 0x00f,
-		.cpu_id		= DAVINCI_CPU_ID_DM355,
-		.name		= "dm355",
-	},
-};
-
-/*
- * Bottom half of timer0 is used for clockevent, top half is used for
- * clocksource.
- */
-static const struct davinci_timer_cfg dm355_timer_cfg = {
-	.reg = DEFINE_RES_IO(DAVINCI_TIMER0_BASE, SZ_4K),
-	.irq = {
-		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT12)),
-		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT34)),
-	},
-};
-
-static struct plat_serial8250_port dm355_serial0_platform_data[] = {
-	{
-		.mapbase	= DAVINCI_UART0_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_UARTINT0),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-static struct plat_serial8250_port dm355_serial1_platform_data[] = {
-	{
-		.mapbase	= DAVINCI_UART1_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_UARTINT1),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-static struct plat_serial8250_port dm355_serial2_platform_data[] = {
-	{
-		.mapbase	= DM355_UART2_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_DM355_UARTINT2),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-
-struct platform_device dm355_serial_device[] = {
-	{
-		.name			= "serial8250",
-		.id			= PLAT8250_DEV_PLATFORM,
-		.dev			= {
-			.platform_data	= dm355_serial0_platform_data,
-		}
-	},
-	{
-		.name			= "serial8250",
-		.id			= PLAT8250_DEV_PLATFORM1,
-		.dev			= {
-			.platform_data	= dm355_serial1_platform_data,
-		}
-	},
-	{
-		.name			= "serial8250",
-		.id			= PLAT8250_DEV_PLATFORM2,
-		.dev			= {
-			.platform_data	= dm355_serial2_platform_data,
-		}
-	},
-	{
-	}
-};
-
-static const struct davinci_soc_info davinci_soc_info_dm355 = {
-	.io_desc		= dm355_io_desc,
-	.io_desc_num		= ARRAY_SIZE(dm355_io_desc),
-	.jtag_id_reg		= 0x01c40028,
-	.ids			= dm355_ids,
-	.ids_num		= ARRAY_SIZE(dm355_ids),
-	.pinmux_base		= DAVINCI_SYSTEM_MODULE_BASE,
-	.pinmux_pins		= dm355_pins,
-	.pinmux_pins_num	= ARRAY_SIZE(dm355_pins),
-	.sram_dma		= 0x00010000,
-	.sram_len		= SZ_32K,
-};
-
-void __init dm355_init_asp1(u32 evt_enable)
-{
-	/* we don't use ASP1 IRQs, or we'd need to mux them ... */
-	if (evt_enable & ASP1_TX_EVT_EN)
-		davinci_cfg_reg(DM355_EVT8_ASP1_TX);
-
-	if (evt_enable & ASP1_RX_EVT_EN)
-		davinci_cfg_reg(DM355_EVT9_ASP1_RX);
-
-	platform_device_register(&dm355_asp1_device);
-}
-
-void __init dm355_init(void)
-{
-	davinci_common_init(&davinci_soc_info_dm355);
-	davinci_map_sysmod();
-}
-
-void __init dm355_init_time(void)
-{
-	void __iomem *pll1, *psc;
-	struct clk *clk;
-	int rv;
-
-	clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DM355_REF_FREQ);
-
-	pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_1K);
-	dm355_pll1_init(NULL, pll1, NULL);
-
-	psc = ioremap(DAVINCI_PWR_SLEEP_CNTRL_BASE, SZ_4K);
-	dm355_psc_init(NULL, psc);
-
-	clk = clk_get(NULL, "timer0");
-	if (WARN_ON(IS_ERR(clk))) {
-		pr_err("Unable to get the timer clock\n");
-		return;
-	}
-
-	rv = davinci_timer_register(clk, &dm355_timer_cfg);
-	WARN(rv, "Unable to register the timer: %d\n", rv);
-}
-
-static struct resource dm355_pll2_resources[] = {
-	{
-		.start	= DAVINCI_PLL2_BASE,
-		.end	= DAVINCI_PLL2_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm355_pll2_device = {
-	.name		= "dm355-pll2",
-	.id		= -1,
-	.resource	= dm355_pll2_resources,
-	.num_resources	= ARRAY_SIZE(dm355_pll2_resources),
-};
-
-void __init dm355_register_clocks(void)
-{
-	/* PLL1 and PSC are registered in dm355_init_time() */
-	platform_device_register(&dm355_pll2_device);
-}
-
-int __init dm355_init_video(struct vpfe_config *vpfe_cfg,
-				struct vpbe_config *vpbe_cfg)
-{
-	if (vpfe_cfg || vpbe_cfg)
-		platform_device_register(&dm355_vpss_device);
-
-	if (vpfe_cfg) {
-		vpfe_capture_dev.dev.platform_data = vpfe_cfg;
-		platform_device_register(&dm355_ccdc_dev);
-		platform_device_register(&vpfe_capture_dev);
-	}
-
-	if (vpbe_cfg) {
-		dm355_vpbe_dev.dev.platform_data = vpbe_cfg;
-		platform_device_register(&dm355_osd_dev);
-		platform_device_register(&dm355_venc_dev);
-		platform_device_register(&dm355_vpbe_dev);
-		platform_device_register(&dm355_vpbe_display);
-	}
-
-	return 0;
-}
-
-static const struct davinci_aintc_config dm355_aintc_config = {
-	.reg = {
-		.start		= DAVINCI_ARM_INTC_BASE,
-		.end		= DAVINCI_ARM_INTC_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	.num_irqs		= 64,
-	.prios			= dm355_default_priorities,
-};
-
-void __init dm355_init_irq(void)
-{
-	davinci_aintc_init(&dm355_aintc_config);
-}
-
-static int __init dm355_init_devices(void)
-{
-	struct platform_device *edma_pdev;
-	int ret = 0;
-
-	if (!cpu_is_davinci_dm355())
-		return 0;
-
-	davinci_cfg_reg(DM355_INT_EDMA_CC);
-	edma_pdev = platform_device_register_full(&dm355_edma_device);
-	if (IS_ERR(edma_pdev)) {
-		pr_warn("%s: Failed to register eDMA\n", __func__);
-		return PTR_ERR(edma_pdev);
-	}
-
-	ret = davinci_init_wdt();
-	if (ret)
-		pr_warn("%s: watchdog init failed: %d\n", __func__, ret);
-
-	return ret;
-}
-postcore_initcall(dm355_init_devices);
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
deleted file mode 100644
index 7538bb87f373..000000000000
--- a/arch/arm/mach-davinci/dm365.c
+++ /dev/null
@@ -1,1094 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * TI DaVinci DM365 chip specific setup
- *
- * Copyright (C) 2009 Texas Instruments
- */
-
-#include <linux/clk-provider.h>
-#include <linux/clk/davinci.h>
-#include <linux/clkdev.h>
-#include <linux/dma-mapping.h>
-#include <linux/dmaengine.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irqchip/irq-davinci-aintc.h>
-#include <linux/platform_data/edma.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_data/keyscan-davinci.h>
-#include <linux/platform_data/spi-davinci.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/spi/spi.h>
-
-#include <clocksource/timer-davinci.h>
-
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "cputype.h"
-#include "serial.h"
-#include "asp.h"
-#include "davinci.h"
-#include "irqs.h"
-#include "mux.h"
-
-#define DM365_REF_FREQ		24000000	/* 24 MHz on the DM365 EVM */
-#define DM365_RTC_BASE			0x01c69000
-#define DM365_KEYSCAN_BASE		0x01c69400
-#define DM365_OSD_BASE			0x01c71c00
-#define DM365_VENC_BASE			0x01c71e00
-#define DAVINCI_DM365_VC_BASE		0x01d0c000
-#define DAVINCI_DMA_VC_TX		2
-#define DAVINCI_DMA_VC_RX		3
-#define DM365_EMAC_BASE			0x01d07000
-#define DM365_EMAC_MDIO_BASE		(DM365_EMAC_BASE + 0x4000)
-#define DM365_EMAC_CNTRL_OFFSET		0x0000
-#define DM365_EMAC_CNTRL_MOD_OFFSET	0x3000
-#define DM365_EMAC_CNTRL_RAM_OFFSET	0x1000
-#define DM365_EMAC_CNTRL_RAM_SIZE	0x2000
-
-#define INTMUX		0x18
-#define EVTMUX		0x1c
-
-
-static const struct mux_config dm365_pins[] = {
-#ifdef CONFIG_DAVINCI_MUX
-MUX_CFG(DM365,	MMCSD0,		0,   24,     1,	  0,	 false)
-
-MUX_CFG(DM365,	SD1_CLK,	0,   16,    3,	  1,	 false)
-MUX_CFG(DM365,	SD1_CMD,	4,   30,    3,	  1,	 false)
-MUX_CFG(DM365,	SD1_DATA3,	4,   28,    3,	  1,	 false)
-MUX_CFG(DM365,	SD1_DATA2,	4,   26,    3,	  1,	 false)
-MUX_CFG(DM365,	SD1_DATA1,	4,   24,    3,	  1,	 false)
-MUX_CFG(DM365,	SD1_DATA0,	4,   22,    3,	  1,	 false)
-
-MUX_CFG(DM365,	I2C_SDA,	3,   23,    3,	  2,	 false)
-MUX_CFG(DM365,	I2C_SCL,	3,   21,    3,	  2,	 false)
-
-MUX_CFG(DM365,	AEMIF_AR_A14,	2,   0,     3,	  1,	 false)
-MUX_CFG(DM365,	AEMIF_AR_BA0,	2,   0,     3,	  2,	 false)
-MUX_CFG(DM365,	AEMIF_A3,	2,   2,     3,	  1,	 false)
-MUX_CFG(DM365,	AEMIF_A7,	2,   4,     3,	  1,	 false)
-MUX_CFG(DM365,	AEMIF_D15_8,	2,   6,     1,	  1,	 false)
-MUX_CFG(DM365,	AEMIF_CE0,	2,   7,     1,	  0,	 false)
-MUX_CFG(DM365,	AEMIF_CE1,	2,   8,     1,    0,     false)
-MUX_CFG(DM365,	AEMIF_WE_OE,	2,   9,     1,    0,     false)
-
-MUX_CFG(DM365,	MCBSP0_BDX,	0,   23,    1,	  1,	 false)
-MUX_CFG(DM365,	MCBSP0_X,	0,   22,    1,	  1,	 false)
-MUX_CFG(DM365,	MCBSP0_BFSX,	0,   21,    1,	  1,	 false)
-MUX_CFG(DM365,	MCBSP0_BDR,	0,   20,    1,	  1,	 false)
-MUX_CFG(DM365,	MCBSP0_R,	0,   19,    1,	  1,	 false)
-MUX_CFG(DM365,	MCBSP0_BFSR,	0,   18,    1,	  1,	 false)
-
-MUX_CFG(DM365,	SPI0_SCLK,	3,   28,    1,    1,	 false)
-MUX_CFG(DM365,	SPI0_SDI,	3,   26,    3,    1,	 false)
-MUX_CFG(DM365,	SPI0_SDO,	3,   25,    1,    1,	 false)
-MUX_CFG(DM365,	SPI0_SDENA0,	3,   29,    3,    1,	 false)
-MUX_CFG(DM365,	SPI0_SDENA1,	3,   26,    3,    2,	 false)
-
-MUX_CFG(DM365,	UART0_RXD,	3,   20,    1,    1,	 false)
-MUX_CFG(DM365,	UART0_TXD,	3,   19,    1,    1,	 false)
-MUX_CFG(DM365,	UART1_RXD,	3,   17,    3,    2,	 false)
-MUX_CFG(DM365,	UART1_TXD,	3,   15,    3,    2,	 false)
-MUX_CFG(DM365,	UART1_RTS,	3,   23,    3,    1,	 false)
-MUX_CFG(DM365,	UART1_CTS,	3,   21,    3,    1,	 false)
-
-MUX_CFG(DM365,  EMAC_TX_EN,	3,   17,    3,    1,     false)
-MUX_CFG(DM365,  EMAC_TX_CLK,	3,   15,    3,    1,     false)
-MUX_CFG(DM365,  EMAC_COL,	3,   14,    1,    1,     false)
-MUX_CFG(DM365,  EMAC_TXD3,	3,   13,    1,    1,     false)
-MUX_CFG(DM365,  EMAC_TXD2,	3,   12,    1,    1,     false)
-MUX_CFG(DM365,  EMAC_TXD1,	3,   11,    1,    1,     false)
-MUX_CFG(DM365,  EMAC_TXD0,	3,   10,    1,    1,     false)
-MUX_CFG(DM365,  EMAC_RXD3,	3,   9,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_RXD2,	3,   8,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_RXD1,	3,   7,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_RXD0,	3,   6,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_RX_CLK,	3,   5,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_RX_DV,	3,   4,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_RX_ER,	3,   3,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_CRS,	3,   2,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_MDIO,	3,   1,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_MDCLK,	3,   0,     1,    1,     false)
-
-MUX_CFG(DM365,	KEYSCAN,	2,   0,     0x3f, 0x3f,  false)
-
-MUX_CFG(DM365,	PWM0,		1,   0,     3,    2,     false)
-MUX_CFG(DM365,	PWM0_G23,	3,   26,    3,    3,     false)
-MUX_CFG(DM365,	PWM1,		1,   2,     3,    2,     false)
-MUX_CFG(DM365,	PWM1_G25,	3,   29,    3,    2,     false)
-MUX_CFG(DM365,	PWM2_G87,	1,   10,    3,    2,     false)
-MUX_CFG(DM365,	PWM2_G88,	1,   8,     3,    2,     false)
-MUX_CFG(DM365,	PWM2_G89,	1,   6,     3,    2,     false)
-MUX_CFG(DM365,	PWM2_G90,	1,   4,     3,    2,     false)
-MUX_CFG(DM365,	PWM3_G80,	1,   20,    3,    3,     false)
-MUX_CFG(DM365,	PWM3_G81,	1,   18,    3,    3,     false)
-MUX_CFG(DM365,	PWM3_G85,	1,   14,    3,    2,     false)
-MUX_CFG(DM365,	PWM3_G86,	1,   12,    3,    2,     false)
-
-MUX_CFG(DM365,	SPI1_SCLK,	4,   2,     3,    1,	 false)
-MUX_CFG(DM365,	SPI1_SDI,	3,   31,    1,    1,	 false)
-MUX_CFG(DM365,	SPI1_SDO,	4,   0,     3,    1,	 false)
-MUX_CFG(DM365,	SPI1_SDENA0,	4,   4,     3,    1,	 false)
-MUX_CFG(DM365,	SPI1_SDENA1,	4,   0,     3,    2,	 false)
-
-MUX_CFG(DM365,	SPI2_SCLK,	4,   10,    3,    1,	 false)
-MUX_CFG(DM365,	SPI2_SDI,	4,   6,     3,    1,	 false)
-MUX_CFG(DM365,	SPI2_SDO,	4,   8,     3,    1,	 false)
-MUX_CFG(DM365,	SPI2_SDENA0,	4,   12,    3,    1,	 false)
-MUX_CFG(DM365,	SPI2_SDENA1,	4,   8,     3,    2,	 false)
-
-MUX_CFG(DM365,	SPI3_SCLK,	0,   0,	    3,    2,	 false)
-MUX_CFG(DM365,	SPI3_SDI,	0,   2,     3,    2,	 false)
-MUX_CFG(DM365,	SPI3_SDO,	0,   6,     3,    2,	 false)
-MUX_CFG(DM365,	SPI3_SDENA0,	0,   4,     3,    2,	 false)
-MUX_CFG(DM365,	SPI3_SDENA1,	0,   6,     3,    3,	 false)
-
-MUX_CFG(DM365,	SPI4_SCLK,	4,   18,    3,    1,	 false)
-MUX_CFG(DM365,	SPI4_SDI,	4,   14,    3,    1,	 false)
-MUX_CFG(DM365,	SPI4_SDO,	4,   16,    3,    1,	 false)
-MUX_CFG(DM365,	SPI4_SDENA0,	4,   20,    3,    1,	 false)
-MUX_CFG(DM365,	SPI4_SDENA1,	4,   16,    3,    2,	 false)
-
-MUX_CFG(DM365,	CLKOUT0,	4,   20,    3,    3,     false)
-MUX_CFG(DM365,	CLKOUT1,	4,   16,    3,    3,     false)
-MUX_CFG(DM365,	CLKOUT2,	4,   8,     3,    3,     false)
-
-MUX_CFG(DM365,	GPIO20,		3,   21,    3,    0,	 false)
-MUX_CFG(DM365,	GPIO30,		4,   6,     3,	  0,	 false)
-MUX_CFG(DM365,	GPIO31,		4,   8,     3,	  0,	 false)
-MUX_CFG(DM365,	GPIO32,		4,   10,    3,	  0,	 false)
-MUX_CFG(DM365,	GPIO33,		4,   12,    3,	  0,	 false)
-MUX_CFG(DM365,	GPIO40,		4,   26,    3,	  0,	 false)
-MUX_CFG(DM365,	GPIO64_57,	2,   6,     1,	  0,	 false)
-
-MUX_CFG(DM365,	VOUT_FIELD,	1,   18,    3,	  1,	 false)
-MUX_CFG(DM365,	VOUT_FIELD_G81,	1,   18,    3,	  0,	 false)
-MUX_CFG(DM365,	VOUT_HVSYNC,	1,   16,    1,	  0,	 false)
-MUX_CFG(DM365,	VOUT_COUTL_EN,	1,   0,     0xff, 0x55,  false)
-MUX_CFG(DM365,	VOUT_COUTH_EN,	1,   8,     0xff, 0x55,  false)
-MUX_CFG(DM365,	VIN_CAM_WEN,	0,   14,    3,	  0,	 false)
-MUX_CFG(DM365,	VIN_CAM_VD,	0,   13,    1,	  0,	 false)
-MUX_CFG(DM365,	VIN_CAM_HD,	0,   12,    1,	  0,	 false)
-MUX_CFG(DM365,	VIN_YIN4_7_EN,	0,   0,     0xff, 0,	 false)
-MUX_CFG(DM365,	VIN_YIN0_3_EN,	0,   8,     0xf,  0,	 false)
-
-INT_CFG(DM365,  INT_EDMA_CC,         2,     1,    1,     false)
-INT_CFG(DM365,  INT_EDMA_TC0_ERR,    3,     1,    1,     false)
-INT_CFG(DM365,  INT_EDMA_TC1_ERR,    4,     1,    1,     false)
-INT_CFG(DM365,  INT_EDMA_TC2_ERR,    22,    1,    1,     false)
-INT_CFG(DM365,  INT_EDMA_TC3_ERR,    23,    1,    1,     false)
-INT_CFG(DM365,  INT_PRTCSS,          10,    1,    1,     false)
-INT_CFG(DM365,  INT_EMAC_RXTHRESH,   14,    1,    1,     false)
-INT_CFG(DM365,  INT_EMAC_RXPULSE,    15,    1,    1,     false)
-INT_CFG(DM365,  INT_EMAC_TXPULSE,    16,    1,    1,     false)
-INT_CFG(DM365,  INT_EMAC_MISCPULSE,  17,    1,    1,     false)
-INT_CFG(DM365,  INT_IMX0_ENABLE,     0,     1,    0,     false)
-INT_CFG(DM365,  INT_IMX0_DISABLE,    0,     1,    1,     false)
-INT_CFG(DM365,  INT_HDVICP_ENABLE,   0,     1,    1,     false)
-INT_CFG(DM365,  INT_HDVICP_DISABLE,  0,     1,    0,     false)
-INT_CFG(DM365,  INT_IMX1_ENABLE,     24,    1,    1,     false)
-INT_CFG(DM365,  INT_IMX1_DISABLE,    24,    1,    0,     false)
-INT_CFG(DM365,  INT_NSF_ENABLE,      25,    1,    1,     false)
-INT_CFG(DM365,  INT_NSF_DISABLE,     25,    1,    0,     false)
-
-EVT_CFG(DM365,	EVT2_ASP_TX,         0,     1,    0,     false)
-EVT_CFG(DM365,	EVT3_ASP_RX,         1,     1,    0,     false)
-EVT_CFG(DM365,	EVT2_VC_TX,          0,     1,    1,     false)
-EVT_CFG(DM365,	EVT3_VC_RX,          1,     1,    1,     false)
-#endif
-};
-
-static u64 dm365_spi0_dma_mask = DMA_BIT_MASK(32);
-
-static struct davinci_spi_platform_data dm365_spi0_pdata = {
-	.version 	= SPI_VERSION_1,
-	.num_chipselect = 2,
-	.dma_event_q	= EVENTQ_3,
-	.prescaler_limit = 1,
-};
-
-static struct resource dm365_spi0_resources[] = {
-	{
-		.start = 0x01c66000,
-		.end   = 0x01c667ff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = DAVINCI_INTC_IRQ(IRQ_DM365_SPIINT0_0),
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dm365_spi0_device = {
-	.name = "spi_davinci",
-	.id = 0,
-	.dev = {
-		.dma_mask = &dm365_spi0_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &dm365_spi0_pdata,
-	},
-	.num_resources = ARRAY_SIZE(dm365_spi0_resources),
-	.resource = dm365_spi0_resources,
-};
-
-void __init dm365_init_spi0(unsigned chipselect_mask,
-		const struct spi_board_info *info, unsigned len)
-{
-	davinci_cfg_reg(DM365_SPI0_SCLK);
-	davinci_cfg_reg(DM365_SPI0_SDI);
-	davinci_cfg_reg(DM365_SPI0_SDO);
-
-	/* not all slaves will be wired up */
-	if (chipselect_mask & BIT(0))
-		davinci_cfg_reg(DM365_SPI0_SDENA0);
-	if (chipselect_mask & BIT(1))
-		davinci_cfg_reg(DM365_SPI0_SDENA1);
-
-	spi_register_board_info(info, len);
-
-	platform_device_register(&dm365_spi0_device);
-}
-
-static struct resource dm365_gpio_resources[] = {
-	{	/* registers */
-		.start	= DAVINCI_GPIO_BASE,
-		.end	= DAVINCI_GPIO_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{	/* interrupt */
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO0),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO1),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO1),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO2),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO2),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO3),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO3),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO4),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO4),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO5),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO5),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO6),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO6),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO7),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO7),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct davinci_gpio_platform_data dm365_gpio_platform_data = {
-	.no_auto_base	= true,
-	.base		= 0,
-	.ngpio		= 104,
-	.gpio_unbanked	= 8,
-};
-
-int __init dm365_gpio_register(void)
-{
-	return davinci_gpio_register(dm365_gpio_resources,
-				     ARRAY_SIZE(dm365_gpio_resources),
-				     &dm365_gpio_platform_data);
-}
-
-static struct emac_platform_data dm365_emac_pdata = {
-	.ctrl_reg_offset	= DM365_EMAC_CNTRL_OFFSET,
-	.ctrl_mod_reg_offset	= DM365_EMAC_CNTRL_MOD_OFFSET,
-	.ctrl_ram_offset	= DM365_EMAC_CNTRL_RAM_OFFSET,
-	.ctrl_ram_size		= DM365_EMAC_CNTRL_RAM_SIZE,
-	.version		= EMAC_VERSION_2,
-};
-
-static struct resource dm365_emac_resources[] = {
-	{
-		.start	= DM365_EMAC_BASE,
-		.end	= DM365_EMAC_BASE + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_RXTHRESH),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_RXTHRESH),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_RXPULSE),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_RXPULSE),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_TXPULSE),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_TXPULSE),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_MISCPULSE),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_MISCPULSE),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dm365_emac_device = {
-	.name		= "davinci_emac",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &dm365_emac_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(dm365_emac_resources),
-	.resource	= dm365_emac_resources,
-};
-
-static struct resource dm365_mdio_resources[] = {
-	{
-		.start	= DM365_EMAC_MDIO_BASE,
-		.end	= DM365_EMAC_MDIO_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm365_mdio_device = {
-	.name		= "davinci_mdio",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dm365_mdio_resources),
-	.resource	= dm365_mdio_resources,
-};
-
-static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = {
-	[IRQ_VDINT0]			= 2,
-	[IRQ_VDINT1]			= 6,
-	[IRQ_VDINT2]			= 6,
-	[IRQ_HISTINT]			= 6,
-	[IRQ_H3AINT]			= 6,
-	[IRQ_PRVUINT]			= 6,
-	[IRQ_RSZINT]			= 6,
-	[IRQ_DM365_INSFINT]		= 7,
-	[IRQ_VENCINT]			= 6,
-	[IRQ_ASQINT]			= 6,
-	[IRQ_IMXINT]			= 6,
-	[IRQ_DM365_IMCOPINT]		= 4,
-	[IRQ_USBINT]			= 4,
-	[IRQ_DM365_RTOINT]		= 7,
-	[IRQ_DM365_TINT5]		= 7,
-	[IRQ_DM365_TINT6]		= 5,
-	[IRQ_CCINT0]			= 5,
-	[IRQ_CCERRINT]			= 5,
-	[IRQ_TCERRINT0]			= 5,
-	[IRQ_TCERRINT]			= 7,
-	[IRQ_PSCIN]			= 4,
-	[IRQ_DM365_SPINT2_1]		= 7,
-	[IRQ_DM365_TINT7]		= 7,
-	[IRQ_DM365_SDIOINT0]		= 7,
-	[IRQ_MBXINT]			= 7,
-	[IRQ_MBRINT]			= 7,
-	[IRQ_MMCINT]			= 7,
-	[IRQ_DM365_MMCINT1]		= 7,
-	[IRQ_DM365_PWMINT3]		= 7,
-	[IRQ_AEMIFINT]			= 2,
-	[IRQ_DM365_SDIOINT1]		= 2,
-	[IRQ_TINT0_TINT12]		= 7,
-	[IRQ_TINT0_TINT34]		= 7,
-	[IRQ_TINT1_TINT12]		= 7,
-	[IRQ_TINT1_TINT34]		= 7,
-	[IRQ_PWMINT0]			= 7,
-	[IRQ_PWMINT1]			= 3,
-	[IRQ_PWMINT2]			= 3,
-	[IRQ_I2C]			= 3,
-	[IRQ_UARTINT0]			= 3,
-	[IRQ_UARTINT1]			= 3,
-	[IRQ_DM365_RTCINT]		= 3,
-	[IRQ_DM365_SPIINT0_0]		= 3,
-	[IRQ_DM365_SPIINT3_0]		= 3,
-	[IRQ_DM365_GPIO0]		= 3,
-	[IRQ_DM365_GPIO1]		= 7,
-	[IRQ_DM365_GPIO2]		= 4,
-	[IRQ_DM365_GPIO3]		= 4,
-	[IRQ_DM365_GPIO4]		= 7,
-	[IRQ_DM365_GPIO5]		= 7,
-	[IRQ_DM365_GPIO6]		= 7,
-	[IRQ_DM365_GPIO7]		= 7,
-	[IRQ_DM365_EMAC_RXTHRESH]	= 7,
-	[IRQ_DM365_EMAC_RXPULSE]	= 7,
-	[IRQ_DM365_EMAC_TXPULSE]	= 7,
-	[IRQ_DM365_EMAC_MISCPULSE]	= 7,
-	[IRQ_DM365_GPIO12]		= 7,
-	[IRQ_DM365_GPIO13]		= 7,
-	[IRQ_DM365_GPIO14]		= 7,
-	[IRQ_DM365_GPIO15]		= 7,
-	[IRQ_DM365_KEYINT]		= 7,
-	[IRQ_DM365_TCERRINT2]		= 7,
-	[IRQ_DM365_TCERRINT3]		= 7,
-	[IRQ_DM365_EMUINT]		= 7,
-};
-
-/* Four Transfer Controllers on DM365 */
-static s8 dm365_queue_priority_mapping[][2] = {
-	/* {event queue no, Priority} */
-	{0, 7},
-	{1, 7},
-	{2, 7},
-	{3, 0},
-	{-1, -1},
-};
-
-static const struct dma_slave_map dm365_edma_map[] = {
-	{ "davinci-mcbsp", "tx", EDMA_FILTER_PARAM(0, 2) },
-	{ "davinci-mcbsp", "rx", EDMA_FILTER_PARAM(0, 3) },
-	{ "davinci_voicecodec", "tx", EDMA_FILTER_PARAM(0, 2) },
-	{ "davinci_voicecodec", "rx", EDMA_FILTER_PARAM(0, 3) },
-	{ "spi_davinci.2", "tx", EDMA_FILTER_PARAM(0, 10) },
-	{ "spi_davinci.2", "rx", EDMA_FILTER_PARAM(0, 11) },
-	{ "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 14) },
-	{ "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 15) },
-	{ "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 16) },
-	{ "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 17) },
-	{ "spi_davinci.3", "tx", EDMA_FILTER_PARAM(0, 18) },
-	{ "spi_davinci.3", "rx", EDMA_FILTER_PARAM(0, 19) },
-	{ "da830-mmc.0", "rx", EDMA_FILTER_PARAM(0, 26) },
-	{ "da830-mmc.0", "tx", EDMA_FILTER_PARAM(0, 27) },
-	{ "da830-mmc.1", "rx", EDMA_FILTER_PARAM(0, 30) },
-	{ "da830-mmc.1", "tx", EDMA_FILTER_PARAM(0, 31) },
-};
-
-static struct edma_soc_info dm365_edma_pdata = {
-	.queue_priority_mapping	= dm365_queue_priority_mapping,
-	.default_queue		= EVENTQ_3,
-	.slave_map		= dm365_edma_map,
-	.slavecnt		= ARRAY_SIZE(dm365_edma_map),
-};
-
-static struct resource edma_resources[] = {
-	{
-		.name	= "edma3_cc",
-		.start	= 0x01c00000,
-		.end	= 0x01c00000 + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc0",
-		.start	= 0x01c10000,
-		.end	= 0x01c10000 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc1",
-		.start	= 0x01c10400,
-		.end	= 0x01c10400 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc2",
-		.start	= 0x01c10800,
-		.end	= 0x01c10800 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc3",
-		.start	= 0x01c10c00,
-		.end	= 0x01c10c00 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_ccint",
-		.start	= DAVINCI_INTC_IRQ(IRQ_CCINT0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "edma3_ccerrint",
-		.start	= DAVINCI_INTC_IRQ(IRQ_CCERRINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-	/* not using TC*_ERR */
-};
-
-static const struct platform_device_info dm365_edma_device __initconst = {
-	.name		= "edma",
-	.id		= 0,
-	.dma_mask	= DMA_BIT_MASK(32),
-	.res		= edma_resources,
-	.num_res	= ARRAY_SIZE(edma_resources),
-	.data		= &dm365_edma_pdata,
-	.size_data	= sizeof(dm365_edma_pdata),
-};
-
-static struct resource dm365_asp_resources[] = {
-	{
-		.name	= "mpu",
-		.start	= DAVINCI_DM365_ASP0_BASE,
-		.end	= DAVINCI_DM365_ASP0_BASE + SZ_8K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DAVINCI_DMA_ASP0_TX,
-		.end	= DAVINCI_DMA_ASP0_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	{
-		.start	= DAVINCI_DMA_ASP0_RX,
-		.end	= DAVINCI_DMA_ASP0_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device dm365_asp_device = {
-	.name		= "davinci-mcbsp",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm365_asp_resources),
-	.resource	= dm365_asp_resources,
-};
-
-static struct resource dm365_vc_resources[] = {
-	{
-		.start	= DAVINCI_DM365_VC_BASE,
-		.end	= DAVINCI_DM365_VC_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DAVINCI_DMA_VC_TX,
-		.end	= DAVINCI_DMA_VC_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	{
-		.start	= DAVINCI_DMA_VC_RX,
-		.end	= DAVINCI_DMA_VC_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device dm365_vc_device = {
-	.name		= "davinci_voicecodec",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm365_vc_resources),
-	.resource	= dm365_vc_resources,
-};
-
-static struct resource dm365_rtc_resources[] = {
-	{
-		.start = DM365_RTC_BASE,
-		.end = DM365_RTC_BASE + SZ_1K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = DAVINCI_INTC_IRQ(IRQ_DM365_RTCINT),
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dm365_rtc_device = {
-	.name = "rtc_davinci",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(dm365_rtc_resources),
-	.resource = dm365_rtc_resources,
-};
-
-static struct map_desc dm365_io_desc[] = {
-	{
-		.virtual	= IO_VIRT,
-		.pfn		= __phys_to_pfn(IO_PHYS),
-		.length		= IO_SIZE,
-		.type		= MT_DEVICE
-	},
-};
-
-static struct resource dm365_ks_resources[] = {
-	{
-		/* registers */
-		.start = DM365_KEYSCAN_BASE,
-		.end = DM365_KEYSCAN_BASE + SZ_1K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		/* interrupt */
-		.start = DAVINCI_INTC_IRQ(IRQ_DM365_KEYINT),
-		.end = DAVINCI_INTC_IRQ(IRQ_DM365_KEYINT),
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dm365_ks_device = {
-	.name		= "davinci_keyscan",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dm365_ks_resources),
-	.resource	= dm365_ks_resources,
-};
-
-/* Contents of JTAG ID register used to identify exact cpu type */
-static struct davinci_id dm365_ids[] = {
-	{
-		.variant	= 0x0,
-		.part_no	= 0xb83e,
-		.manufacturer	= 0x017,
-		.cpu_id		= DAVINCI_CPU_ID_DM365,
-		.name		= "dm365_rev1.1",
-	},
-	{
-		.variant	= 0x8,
-		.part_no	= 0xb83e,
-		.manufacturer	= 0x017,
-		.cpu_id		= DAVINCI_CPU_ID_DM365,
-		.name		= "dm365_rev1.2",
-	},
-};
-
-/*
- * Bottom half of timer0 is used for clockevent, top half is used for
- * clocksource.
- */
-static const struct davinci_timer_cfg dm365_timer_cfg = {
-	.reg = DEFINE_RES_IO(DAVINCI_TIMER0_BASE, SZ_128),
-	.irq = {
-		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT12)),
-		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT34)),
-	},
-};
-
-#define DM365_UART1_BASE	(IO_PHYS + 0x106000)
-
-static struct plat_serial8250_port dm365_serial0_platform_data[] = {
-	{
-		.mapbase	= DAVINCI_UART0_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_UARTINT0),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-static struct plat_serial8250_port dm365_serial1_platform_data[] = {
-	{
-		.mapbase	= DM365_UART1_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_UARTINT1),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-
-struct platform_device dm365_serial_device[] = {
-	{
-		.name			= "serial8250",
-		.id			= PLAT8250_DEV_PLATFORM,
-		.dev			= {
-			.platform_data	= dm365_serial0_platform_data,
-		}
-	},
-	{
-		.name			= "serial8250",
-		.id			= PLAT8250_DEV_PLATFORM1,
-		.dev			= {
-			.platform_data	= dm365_serial1_platform_data,
-		}
-	},
-	{
-	}
-};
-
-static const struct davinci_soc_info davinci_soc_info_dm365 = {
-	.io_desc		= dm365_io_desc,
-	.io_desc_num		= ARRAY_SIZE(dm365_io_desc),
-	.jtag_id_reg		= 0x01c40028,
-	.ids			= dm365_ids,
-	.ids_num		= ARRAY_SIZE(dm365_ids),
-	.pinmux_base		= DAVINCI_SYSTEM_MODULE_BASE,
-	.pinmux_pins		= dm365_pins,
-	.pinmux_pins_num	= ARRAY_SIZE(dm365_pins),
-	.emac_pdata		= &dm365_emac_pdata,
-	.sram_dma		= 0x00010000,
-	.sram_len		= SZ_32K,
-};
-
-void __init dm365_init_asp(void)
-{
-	davinci_cfg_reg(DM365_MCBSP0_BDX);
-	davinci_cfg_reg(DM365_MCBSP0_X);
-	davinci_cfg_reg(DM365_MCBSP0_BFSX);
-	davinci_cfg_reg(DM365_MCBSP0_BDR);
-	davinci_cfg_reg(DM365_MCBSP0_R);
-	davinci_cfg_reg(DM365_MCBSP0_BFSR);
-	davinci_cfg_reg(DM365_EVT2_ASP_TX);
-	davinci_cfg_reg(DM365_EVT3_ASP_RX);
-	platform_device_register(&dm365_asp_device);
-}
-
-void __init dm365_init_vc(void)
-{
-	davinci_cfg_reg(DM365_EVT2_VC_TX);
-	davinci_cfg_reg(DM365_EVT3_VC_RX);
-	platform_device_register(&dm365_vc_device);
-}
-
-void __init dm365_init_ks(struct davinci_ks_platform_data *pdata)
-{
-	dm365_ks_device.dev.platform_data = pdata;
-	platform_device_register(&dm365_ks_device);
-}
-
-void __init dm365_init_rtc(void)
-{
-	davinci_cfg_reg(DM365_INT_PRTCSS);
-	platform_device_register(&dm365_rtc_device);
-}
-
-void __init dm365_init(void)
-{
-	davinci_common_init(&davinci_soc_info_dm365);
-	davinci_map_sysmod();
-}
-
-void __init dm365_init_time(void)
-{
-	void __iomem *pll1, *pll2, *psc;
-	struct clk *clk;
-	int rv;
-
-	clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DM365_REF_FREQ);
-
-	pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_1K);
-	dm365_pll1_init(NULL, pll1, NULL);
-
-	pll2 = ioremap(DAVINCI_PLL2_BASE, SZ_1K);
-	dm365_pll2_init(NULL, pll2, NULL);
-
-	psc = ioremap(DAVINCI_PWR_SLEEP_CNTRL_BASE, SZ_4K);
-	dm365_psc_init(NULL, psc);
-
-	clk = clk_get(NULL, "timer0");
-	if (WARN_ON(IS_ERR(clk))) {
-		pr_err("Unable to get the timer clock\n");
-		return;
-	}
-
-	rv = davinci_timer_register(clk, &dm365_timer_cfg);
-	WARN(rv, "Unable to register the timer: %d\n", rv);
-}
-
-void __init dm365_register_clocks(void)
-{
-	/* all clocks are currently registered in dm365_init_time() */
-}
-
-static struct resource dm365_vpss_resources[] = {
-	{
-		/* VPSS ISP5 Base address */
-		.name           = "isp5",
-		.start          = 0x01c70000,
-		.end            = 0x01c70000 + 0xff,
-		.flags          = IORESOURCE_MEM,
-	},
-	{
-		/* VPSS CLK Base address */
-		.name           = "vpss",
-		.start          = 0x01c70200,
-		.end            = 0x01c70200 + 0xff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm365_vpss_device = {
-       .name                   = "vpss",
-       .id                     = -1,
-       .dev.platform_data      = "dm365_vpss",
-       .num_resources          = ARRAY_SIZE(dm365_vpss_resources),
-       .resource               = dm365_vpss_resources,
-};
-
-static struct resource vpfe_resources[] = {
-	{
-		.start          = DAVINCI_INTC_IRQ(IRQ_VDINT0),
-		.end            = DAVINCI_INTC_IRQ(IRQ_VDINT0),
-		.flags          = IORESOURCE_IRQ,
-	},
-	{
-		.start          = DAVINCI_INTC_IRQ(IRQ_VDINT1),
-		.end            = DAVINCI_INTC_IRQ(IRQ_VDINT1),
-		.flags          = IORESOURCE_IRQ,
-	},
-};
-
-static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
-static struct platform_device vpfe_capture_dev = {
-	.name           = CAPTURE_DRV_NAME,
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(vpfe_resources),
-	.resource       = vpfe_resources,
-	.dev = {
-		.dma_mask               = &vpfe_capture_dma_mask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-	},
-};
-
-static void dm365_isif_setup_pinmux(void)
-{
-	davinci_cfg_reg(DM365_VIN_CAM_WEN);
-	davinci_cfg_reg(DM365_VIN_CAM_VD);
-	davinci_cfg_reg(DM365_VIN_CAM_HD);
-	davinci_cfg_reg(DM365_VIN_YIN4_7_EN);
-	davinci_cfg_reg(DM365_VIN_YIN0_3_EN);
-}
-
-static struct resource isif_resource[] = {
-	/* ISIF Base address */
-	{
-		.start          = 0x01c71000,
-		.end            = 0x01c71000 + 0x1ff,
-		.flags          = IORESOURCE_MEM,
-	},
-	/* ISIF Linearization table 0 */
-	{
-		.start          = 0x1C7C000,
-		.end            = 0x1C7C000 + 0x2ff,
-		.flags          = IORESOURCE_MEM,
-	},
-	/* ISIF Linearization table 1 */
-	{
-		.start          = 0x1C7C400,
-		.end            = 0x1C7C400 + 0x2ff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-static struct platform_device dm365_isif_dev = {
-	.name           = "isif",
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(isif_resource),
-	.resource       = isif_resource,
-	.dev = {
-		.dma_mask               = &vpfe_capture_dma_mask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-		.platform_data		= dm365_isif_setup_pinmux,
-	},
-};
-
-static struct resource dm365_osd_resources[] = {
-	{
-		.start = DM365_OSD_BASE,
-		.end   = DM365_OSD_BASE + 0xff,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static u64 dm365_video_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device dm365_osd_dev = {
-	.name		= DM365_VPBE_OSD_SUBDEV_NAME,
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm365_osd_resources),
-	.resource	= dm365_osd_resources,
-	.dev		= {
-		.dma_mask		= &dm365_video_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-static struct resource dm365_venc_resources[] = {
-	{
-		.start = DAVINCI_INTC_IRQ(IRQ_VENCINT),
-		.end   = DAVINCI_INTC_IRQ(IRQ_VENCINT),
-		.flags = IORESOURCE_IRQ,
-	},
-	/* venc registers io space */
-	{
-		.start = DM365_VENC_BASE,
-		.end   = DM365_VENC_BASE + 0x177,
-		.flags = IORESOURCE_MEM,
-	},
-	/* vdaccfg registers io space */
-	{
-		.start = DAVINCI_SYSTEM_MODULE_BASE + SYSMOD_VDAC_CONFIG,
-		.end   = DAVINCI_SYSTEM_MODULE_BASE + SYSMOD_VDAC_CONFIG + 3,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct resource dm365_v4l2_disp_resources[] = {
-	{
-		.start = DAVINCI_INTC_IRQ(IRQ_VENCINT),
-		.end   = DAVINCI_INTC_IRQ(IRQ_VENCINT),
-		.flags = IORESOURCE_IRQ,
-	},
-	/* venc registers io space */
-	{
-		.start = DM365_VENC_BASE,
-		.end   = DM365_VENC_BASE + 0x177,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static int dm365_vpbe_setup_pinmux(u32 if_type, int field)
-{
-	switch (if_type) {
-	case MEDIA_BUS_FMT_SGRBG8_1X8:
-		davinci_cfg_reg(DM365_VOUT_FIELD_G81);
-		davinci_cfg_reg(DM365_VOUT_COUTL_EN);
-		davinci_cfg_reg(DM365_VOUT_COUTH_EN);
-		break;
-	case MEDIA_BUS_FMT_YUYV10_1X20:
-		if (field)
-			davinci_cfg_reg(DM365_VOUT_FIELD);
-		else
-			davinci_cfg_reg(DM365_VOUT_FIELD_G81);
-		davinci_cfg_reg(DM365_VOUT_COUTL_EN);
-		davinci_cfg_reg(DM365_VOUT_COUTH_EN);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int dm365_venc_setup_clock(enum vpbe_enc_timings_type type,
-				  unsigned int pclock)
-{
-	void __iomem *vpss_clkctl_reg;
-	u32 val;
-
-	vpss_clkctl_reg = DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL);
-
-	switch (type) {
-	case VPBE_ENC_STD:
-		val = VPSS_VENCCLKEN_ENABLE | VPSS_DACCLKEN_ENABLE;
-		break;
-	case VPBE_ENC_DV_TIMINGS:
-		if (pclock <= 27000000) {
-			val = VPSS_VENCCLKEN_ENABLE | VPSS_DACCLKEN_ENABLE;
-		} else {
-			/* set sysclk4 to output 74.25 MHz from pll1 */
-			val = VPSS_PLLC2SYSCLK5_ENABLE | VPSS_DACCLKEN_ENABLE |
-			      VPSS_VENCCLKEN_ENABLE;
-		}
-		break;
-	default:
-		return -EINVAL;
-	}
-	writel(val, vpss_clkctl_reg);
-
-	return 0;
-}
-
-static struct platform_device dm365_vpbe_display = {
-	.name		= "vpbe-v4l2",
-	.id		= -1,
-	.num_resources  = ARRAY_SIZE(dm365_v4l2_disp_resources),
-	.resource	= dm365_v4l2_disp_resources,
-	.dev		= {
-		.dma_mask		= &dm365_video_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-static struct venc_platform_data dm365_venc_pdata = {
-	.setup_pinmux	= dm365_vpbe_setup_pinmux,
-	.setup_clock	= dm365_venc_setup_clock,
-};
-
-static struct platform_device dm365_venc_dev = {
-	.name		= DM365_VPBE_VENC_SUBDEV_NAME,
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm365_venc_resources),
-	.resource	= dm365_venc_resources,
-	.dev		= {
-		.dma_mask		= &dm365_video_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= (void *)&dm365_venc_pdata,
-	},
-};
-
-static struct platform_device dm365_vpbe_dev = {
-	.name		= "vpbe_controller",
-	.id		= -1,
-	.dev		= {
-		.dma_mask		= &dm365_video_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-int __init dm365_init_video(struct vpfe_config *vpfe_cfg,
-				struct vpbe_config *vpbe_cfg)
-{
-	if (vpfe_cfg || vpbe_cfg)
-		platform_device_register(&dm365_vpss_device);
-
-	if (vpfe_cfg) {
-		vpfe_capture_dev.dev.platform_data = vpfe_cfg;
-		platform_device_register(&dm365_isif_dev);
-		platform_device_register(&vpfe_capture_dev);
-	}
-	if (vpbe_cfg) {
-		dm365_vpbe_dev.dev.platform_data = vpbe_cfg;
-		platform_device_register(&dm365_osd_dev);
-		platform_device_register(&dm365_venc_dev);
-		platform_device_register(&dm365_vpbe_dev);
-		platform_device_register(&dm365_vpbe_display);
-	}
-
-	return 0;
-}
-
-static const struct davinci_aintc_config dm365_aintc_config = {
-	.reg = {
-		.start		= DAVINCI_ARM_INTC_BASE,
-		.end		= DAVINCI_ARM_INTC_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	.num_irqs		= 64,
-	.prios			= dm365_default_priorities,
-};
-
-void __init dm365_init_irq(void)
-{
-	davinci_aintc_init(&dm365_aintc_config);
-}
-
-static int __init dm365_init_devices(void)
-{
-	struct platform_device *edma_pdev;
-	int ret = 0;
-
-	if (!cpu_is_davinci_dm365())
-		return 0;
-
-	davinci_cfg_reg(DM365_INT_EDMA_CC);
-	edma_pdev = platform_device_register_full(&dm365_edma_device);
-	if (IS_ERR(edma_pdev)) {
-		pr_warn("%s: Failed to register eDMA\n", __func__);
-		return PTR_ERR(edma_pdev);
-	}
-
-	platform_device_register(&dm365_mdio_device);
-	platform_device_register(&dm365_emac_device);
-
-	ret = davinci_init_wdt();
-	if (ret)
-		pr_warn("%s: watchdog init failed: %d\n", __func__, ret);
-
-	return ret;
-}
-postcore_initcall(dm365_init_devices);