diff options
Diffstat (limited to 'arch/arm/mach-davinci')
| -rw-r--r-- | arch/arm/mach-davinci/Kconfig | 130 | ||||
| -rw-r--r-- | arch/arm/mach-davinci/Makefile | 9 | ||||
| -rw-r--r-- | arch/arm/mach-davinci/board-da830-evm.c | 690 | ||||
| -rw-r--r-- | arch/arm/mach-davinci/board-da850-evm.c | 1550 | ||||
| -rw-r--r-- | arch/arm/mach-davinci/board-dm355-evm.c | 444 | ||||
| -rw-r--r-- | arch/arm/mach-davinci/board-dm355-leopard.c | 278 | ||||
| -rw-r--r-- | arch/arm/mach-davinci/board-dm365-evm.c | 855 | ||||
| -rw-r--r-- | arch/arm/mach-davinci/board-mityomapl138.c | 638 | ||||
| -rw-r--r-- | arch/arm/mach-davinci/board-omapl138-hawk.c | 451 | ||||
| -rw-r--r-- | arch/arm/mach-davinci/devices.c | 303 | ||||
| -rw-r--r-- | arch/arm/mach-davinci/dm355.c | 832 | ||||
| -rw-r--r-- | arch/arm/mach-davinci/dm365.c | 1094 |
12 files changed, 2 insertions, 7272 deletions
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index c8cbd9a30791..588213583051 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -14,20 +14,11 @@ menuconfig ARCH_DAVINCI if ARCH_DAVINCI -config ARCH_DAVINCI_DMx - bool - comment "DaVinci Core Type" -config ARCH_DAVINCI_DM355 - bool "DaVinci 355 based system" - depends on ATAGS && UNUSED_BOARD_FILES - select DAVINCI_AINTC - select ARCH_DAVINCI_DMx - config ARCH_DAVINCI_DA830 bool "DA830/OMAP-L137/AM17x based system" - depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT) + depends on AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT depends on ATAGS select ARCH_DAVINCI_DA8XX # needed on silicon revs 1.0, 1.1: @@ -36,7 +27,7 @@ config ARCH_DAVINCI_DA830 config ARCH_DAVINCI_DA850 bool "DA850/OMAP-L138/AM18x based system" - depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT) + depends on AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT depends on ATAGS select ARCH_DAVINCI_DA8XX select DAVINCI_CP_INTC @@ -44,12 +35,6 @@ config ARCH_DAVINCI_DA850 config ARCH_DAVINCI_DA8XX bool -config ARCH_DAVINCI_DM365 - bool "DaVinci 365 based system" - depends on ATAGS && UNUSED_BOARD_FILES - select DAVINCI_AINTC - select ARCH_DAVINCI_DMx - comment "DaVinci Board Type" config MACH_DA8XX_DT @@ -61,117 +46,6 @@ config MACH_DA8XX_DT Say y here to include support for TI DaVinci DA850 based using Flattened Device Tree. More information at Documentation/devicetree -config MACH_DAVINCI_DM355_EVM - bool "TI DM355 EVM" - default ARCH_DAVINCI_DM355 - depends on ARCH_DAVINCI_DM355 - help - Configure this option to specify the whether the board used - for development is a DM355 EVM - -config MACH_DM355_LEOPARD - bool "DM355 Leopard board" - depends on ARCH_DAVINCI_DM355 - help - Configure this option to specify the whether the board used - for development is a DM355 Leopard board. - -config MACH_DAVINCI_DM365_EVM - bool "TI DM365 EVM" - default ARCH_DAVINCI_DM365 - depends on ARCH_DAVINCI_DM365 - help - Configure this option to specify whether the board used - for development is a DM365 EVM - -config MACH_DAVINCI_DA830_EVM - bool "TI DA830/OMAP-L137/AM17x Reference Platform" - default ARCH_DAVINCI_DA830 - depends on ATAGS && UNUSED_BOARD_FILES - depends on ARCH_DAVINCI_DA830 - select GPIO_PCF857X if I2C - help - Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module. - -choice - prompt "Select DA830/OMAP-L137/AM17x UI board peripheral" - depends on MACH_DAVINCI_DA830_EVM - help - The presence of UI card on the DA830/OMAP-L137/AM17x EVM is - detected automatically based on successful probe of the I2C - based GPIO expander on that board. This option selected in this - menu has an effect only in case of a successful UI card detection. - -config DA830_UI_LCD - bool "LCD" - help - Say Y here to use the LCD as a framebuffer or simple character - display. - -config DA830_UI_NAND - bool "NAND flash" - help - Say Y here to use the NAND flash. Do not forget to setup - the switch correctly. -endchoice - -config MACH_DAVINCI_DA850_EVM - bool "TI DA850/OMAP-L138/AM18x Reference Platform" - depends on ATAGS && UNUSED_BOARD_FILES - default ARCH_DAVINCI_DA850 - depends on ARCH_DAVINCI_DA850 - help - Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module. - -choice - prompt "Select peripherals connected to expander on UI board" - depends on MACH_DAVINCI_DA850_EVM - help - The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x - EVM is detected automatically based on successful probe of the I2C - based GPIO expander on that card. This option selected in this - menu has an effect only in case of a successful UI card detection. - -config DA850_UI_NONE - bool "No peripheral is enabled" - help - Say Y if you do not want to enable any of the peripherals connected - to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card - -config DA850_UI_RMII - bool "RMII Ethernet PHY" - help - Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x - EVM. This PHY is found on the UI daughter card that is supplied with - the EVM. - NOTE: Please take care while choosing this option, MII PHY will - not be functional if RMII mode is selected. - -config DA850_UI_SD_VIDEO_PORT - bool "Video Port Interface" - help - Say Y if you want to use Video Port Interface (VPIF) on the - DA850/OMAP-L138 EVM. The Video decoders/encoders are found on the - UI daughter card that is supplied with the EVM. - -endchoice - -config MACH_MITYOMAPL138 - bool "Critical Link MityDSP-L138/MityARM-1808 SoM" - depends on ARCH_DAVINCI_DA850 - depends on ATAGS && UNUSED_BOARD_FILES - help - Say Y here to select the Critical Link MityDSP-L138/MityARM-1808 - System on Module. Information on this SoM may be found at - https://www.mitydsp.com - -config MACH_OMAPL138_HAWKBOARD - bool "TI AM1808 / OMAPL-138 Hawkboard platform" - depends on ARCH_DAVINCI_DA850 - depends on ATAGS && UNUSED_BOARD_FILES - help - Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform . - config DAVINCI_MUX bool "DAVINCI multiplexing support" depends on ARCH_DAVINCI diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 3f4894aa7528..5b15a3bbf909 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -10,20 +10,11 @@ obj-y := serial.o usb.o common.o sram.o obj-$(CONFIG_DAVINCI_MUX) += mux.o # Chip specific -obj-$(CONFIG_ARCH_DAVINCI_DM355) += dm355.o devices.o -obj-$(CONFIG_ARCH_DAVINCI_DM365) += dm365.o devices.o obj-$(CONFIG_ARCH_DAVINCI_DA830) += da830.o devices-da8xx.o usb-da8xx.o obj-$(CONFIG_ARCH_DAVINCI_DA850) += da850.o devices-da8xx.o usb-da8xx.o # Board specific obj-$(CONFIG_MACH_DA8XX_DT) += da8xx-dt.o pdata-quirks.o -obj-$(CONFIG_MACH_DAVINCI_DM355_EVM) += board-dm355-evm.o -obj-$(CONFIG_MACH_DM355_LEOPARD) += board-dm355-leopard.o -obj-$(CONFIG_MACH_DAVINCI_DM365_EVM) += board-dm365-evm.o -obj-$(CONFIG_MACH_DAVINCI_DA830_EVM) += board-da830-evm.o -obj-$(CONFIG_MACH_DAVINCI_DA850_EVM) += board-da850-evm.o -obj-$(CONFIG_MACH_MITYOMAPL138) += board-mityomapl138.o -obj-$(CONFIG_MACH_OMAPL138_HAWKBOARD) += board-omapl138-hawk.o # Power Management obj-$(CONFIG_CPU_IDLE) += cpuidle.o diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c deleted file mode 100644 index 6299e5c8f4ea..000000000000 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ /dev/null @@ -1,690 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * TI DA830/OMAP L137 EVM board - * - * Author: Mark A. Greer <mgreer@mvista.com> - * Derived from: arch/arm/mach-davinci/board-dm644x-evm.c - * - * 2007, 2009 (c) MontaVista Software, Inc. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/console.h> -#include <linux/interrupt.h> -#include <linux/gpio.h> -#include <linux/gpio/machine.h> -#include <linux/platform_device.h> -#include <linux/i2c.h> -#include <linux/platform_data/pcf857x.h> -#include <linux/property.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> -#include <linux/platform_data/gpio-davinci.h> -#include <linux/platform_data/mtd-davinci.h> -#include <linux/platform_data/mtd-davinci-aemif.h> -#include <linux/platform_data/spi-davinci.h> -#include <linux/platform_data/usb-davinci.h> -#include <linux/platform_data/ti-aemif.h> -#include <linux/regulator/fixed.h> -#include <linux/regulator/machine.h> -#include <linux/nvmem-provider.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include "common.h" -#include "mux.h" -#include "da8xx.h" -#include "irqs.h" - -#define DA830_EVM_PHY_ID "" -/* - * USB1 VBUS is controlled by GPIO1[15], over-current is reported on GPIO2[4]. - */ -#define ON_BD_USB_DRV GPIO_TO_PIN(1, 15) -#define ON_BD_USB_OVC GPIO_TO_PIN(2, 4) - -static const short da830_evm_usb11_pins[] = { - DA830_GPIO1_15, DA830_GPIO2_4, - -1 -}; - -static struct regulator_consumer_supply da830_evm_usb_supplies[] = { - REGULATOR_SUPPLY("vbus", NULL), -}; - -static struct regulator_init_data da830_evm_usb_vbus_data = { - .consumer_supplies = da830_evm_usb_supplies, - .num_consumer_supplies = ARRAY_SIZE(da830_evm_usb_supplies), - .constraints = { - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, -}; - -static struct fixed_voltage_config da830_evm_usb_vbus = { - .supply_name = "vbus", - .microvolts = 33000000, - .init_data = &da830_evm_usb_vbus_data, -}; - -static struct platform_device da830_evm_usb_vbus_device = { - .name = "reg-fixed-voltage", - .id = 0, - .dev = { - .platform_data = &da830_evm_usb_vbus, - }, -}; - -static struct gpiod_lookup_table da830_evm_usb_oc_gpio_lookup = { - .dev_id = "ohci-da8xx", - .table = { - GPIO_LOOKUP("davinci_gpio", ON_BD_USB_OVC, "oc", 0), - { } - }, -}; - -static struct gpiod_lookup_table da830_evm_usb_vbus_gpio_lookup = { - .dev_id = "reg-fixed-voltage.0", - .table = { - GPIO_LOOKUP("davinci_gpio", ON_BD_USB_DRV, NULL, 0), - { } - }, -}; - -static struct gpiod_lookup_table *da830_evm_usb_gpio_lookups[] = { - &da830_evm_usb_oc_gpio_lookup, - &da830_evm_usb_vbus_gpio_lookup, -}; - -static struct da8xx_ohci_root_hub da830_evm_usb11_pdata = { - /* TPS2065 switch @ 5V */ - .potpgt = (3 + 1) / 2, /* 3 ms max */ -}; - -static __init void da830_evm_usb_init(void) -{ - int ret; - - ret = da8xx_register_usb_phy_clocks(); - if (ret) - pr_warn("%s: USB PHY CLK registration failed: %d\n", - __func__, ret); - - gpiod_add_lookup_tables(da830_evm_usb_gpio_lookups, - ARRAY_SIZE(da830_evm_usb_gpio_lookups)); - - ret = da8xx_register_usb_phy(); - if (ret) - pr_warn("%s: USB PHY registration failed: %d\n", - __func__, ret); - - ret = davinci_cfg_reg(DA830_USB0_DRVVBUS); - if (ret) - pr_warn("%s: USB 2.0 PinMux setup failed: %d\n", __func__, ret); - else { - /* - * TPS2065 switch @ 5V supplies 1 A (sustains 1.5 A), - * with the power on to power good time of 3 ms. - */ - ret = da8xx_register_usb20(1000, 3); - if (ret) - pr_warn("%s: USB 2.0 registration failed: %d\n", - __func__, ret); - } - - ret = davinci_cfg_reg_list(da830_evm_usb11_pins); - if (ret) { - pr_warn("%s: USB 1.1 PinMux setup failed: %d\n", __func__, ret); - return; - } - - ret = platform_device_register(&da830_evm_usb_vbus_device); - if (ret) { - pr_warn("%s: Unable to register the vbus supply\n", __func__); - return; - } - - ret = da8xx_register_usb11(&da830_evm_usb11_pdata); - if (ret) - pr_warn("%s: USB 1.1 registration failed: %d\n", __func__, ret); -} - -static const short da830_evm_mcasp1_pins[] = { - DA830_AHCLKX1, DA830_ACLKX1, DA830_AFSX1, DA830_AHCLKR1, DA830_AFSR1, - DA830_AMUTE1, DA830_AXR1_0, DA830_AXR1_1, DA830_AXR1_2, DA830_AXR1_5, - DA830_ACLKR1, DA830_AXR1_6, DA830_AXR1_7, DA830_AXR1_8, DA830_AXR1_10, - DA830_AXR1_11, - -1 -}; - -static u8 da830_iis_serializer_direction[] = { - RX_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, - INACTIVE_MODE, TX_MODE, INACTIVE_MODE, INACTIVE_MODE, - INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, -}; - -static struct snd_platform_data da830_evm_snd_data = { - .tx_dma_offset = 0x2000, - .rx_dma_offset = 0x2000, - .op_mode = DAVINCI_MCASP_IIS_MODE, - .num_serializer = ARRAY_SIZE(da830_iis_serializer_direction), - .tdm_slots = 2, - .serial_dir = da830_iis_serializer_direction, - .asp_chan_q = EVENTQ_0, - .version = MCASP_VERSION_2, - .txnumevt = 1, - .rxnumevt = 1, -}; - -/* - * GPIO2[1] is used as MMC_SD_WP and GPIO2[2] as MMC_SD_INS. - */ -static const short da830_evm_mmc_sd_pins[] = { - DA830_MMCSD_DAT_0, DA830_MMCSD_DAT_1, DA830_MMCSD_DAT_2, - DA830_MMCSD_DAT_3, DA830_MMCSD_DAT_4, DA830_MMCSD_DAT_5, - DA830_MMCSD_DAT_6, DA830_MMCSD_DAT_7, DA830_MMCSD_CLK, - DA830_MMCSD_CMD, DA830_GPIO2_1, DA830_GPIO2_2, - -1 -}; - -#define DA830_MMCSD_WP_PIN GPIO_TO_PIN(2, 1) -#define DA830_MMCSD_CD_PIN GPIO_TO_PIN(2, 2) - -static struct gpiod_lookup_table mmc_gpios_table = { - .dev_id = "da830-mmc.0", - .table = { - /* gpio chip 1 contains gpio range 32-63 */ - GPIO_LOOKUP("davinci_gpio", DA830_MMCSD_CD_PIN, "cd", - GPIO_ACTIVE_LOW), - GPIO_LOOKUP("davinci_gpio", DA830_MMCSD_WP_PIN, "wp", - GPIO_ACTIVE_LOW), - { } - }, -}; - -static struct davinci_mmc_config da830_evm_mmc_config = { - .wires = 8, - .max_freq = 50000000, - .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, -}; - -static inline void da830_evm_init_mmc(void) -{ - int ret; - - ret = davinci_cfg_reg_list(da830_evm_mmc_sd_pins); - if (ret) { - pr_warn("%s: mmc/sd mux setup failed: %d\n", __func__, ret); - return; - } - - gpiod_add_lookup_table(&mmc_gpios_table); - - ret = da8xx_register_mmcsd0(&da830_evm_mmc_config); - if (ret) { - pr_warn("%s: mmc/sd registration failed: %d\n", __func__, ret); - gpiod_remove_lookup_table(&mmc_gpios_table); - } -} - -#define HAS_MMC IS_ENABLED(CONFIG_MMC_DAVINCI) - -#ifdef CONFIG_DA830_UI_NAND -static struct mtd_partition da830_evm_nand_partitions[] = { - /* bootloader (U-Boot, etc) in first sector */ - [0] = { - .name = "bootloader", - .offset = 0, - .size = SZ_128K, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - /* bootloader params in the next sector */ - [1] = { - .name = "params", - .offset = MTDPART_OFS_APPEND, - .size = SZ_128K, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - /* kernel */ - [2] = { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = SZ_2M, - .mask_flags = 0, - }, - /* file system */ - [3] = { - .name = "filesystem", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0, - } -}; - -/* flash bbt descriptors */ -static uint8_t da830_evm_nand_bbt_pattern[] = { 'B', 'b', 't', '0' }; -static uint8_t da830_evm_nand_mirror_pattern[] = { '1', 't', 'b', 'B' }; - -static struct nand_bbt_descr da830_evm_nand_bbt_main_descr = { - .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | - NAND_BBT_WRITE | NAND_BBT_2BIT | - NAND_BBT_VERSION | NAND_BBT_PERCHIP, - .offs = 2, - .len = 4, - .veroffs = 16, - .maxblocks = 4, - .pattern = da830_evm_nand_bbt_pattern -}; - -static struct nand_bbt_descr da830_evm_nand_bbt_mirror_descr = { - .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | - NAND_BBT_WRITE | NAND_BBT_2BIT | - NAND_BBT_VERSION | NAND_BBT_PERCHIP, - .offs = 2, - .len = 4, - .veroffs = 16, - .maxblocks = 4, - .pattern = da830_evm_nand_mirror_pattern -}; - -static struct davinci_aemif_timing da830_evm_nandflash_timing = { - .wsetup = 24, - .wstrobe = 21, - .whold = 14, - .rsetup = 19, - .rstrobe = 50, - .rhold = 0, - .ta = 20, -}; - -static struct davinci_nand_pdata da830_evm_nand_pdata = { - .core_chipsel = 1, - .parts = da830_evm_nand_partitions, - .nr_parts = ARRAY_SIZE(da830_evm_nand_partitions), - .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST, - .ecc_bits = 4, - .bbt_options = NAND_BBT_USE_FLASH, - .bbt_td = &da830_evm_nand_bbt_main_descr, - .bbt_md = &da830_evm_nand_bbt_mirror_descr, - .timing = &da830_evm_nandflash_timing, -}; - -static struct resource da830_evm_nand_resources[] = { - [0] = { /* First memory resource is NAND I/O window */ - .start = DA8XX_AEMIF_CS3_BASE, - .end = DA8XX_AEMIF_CS3_BASE + PAGE_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { /* Second memory resource is AEMIF control registers */ - .start = DA8XX_AEMIF_CTL_BASE, - .end = DA8XX_AEMIF_CTL_BASE + SZ_32K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device da830_evm_aemif_devices[] = { - { - .name = "davinci_nand", - .id = 1, - .dev = { - .platform_data = &da830_evm_nand_pdata, - }, - .num_resources = ARRAY_SIZE(da830_evm_nand_resources), - .resource = da830_evm_nand_resources, - }, -}; - -static struct resource da830_evm_aemif_resource[] = { - { - .start = DA8XX_AEMIF_CTL_BASE, - .end = DA8XX_AEMIF_CTL_BASE + SZ_32K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct aemif_abus_data da830_evm_aemif_abus_data[] = { - { - .cs = 3, - }, -}; - -static struct aemif_platform_data da830_evm_aemif_pdata = { - .abus_data = da830_evm_aemif_abus_data, - .num_abus_data = ARRAY_SIZE(da830_evm_aemif_abus_data), - .sub_devices = da830_evm_aemif_devices, - .num_sub_devices = ARRAY_SIZE(da830_evm_aemif_devices), - .cs_offset = 2, -}; - -static struct platform_device da830_evm_aemif_device = { - .name = "ti-aemif", - .id = -1, - .dev = { - .platform_data = &da830_evm_aemif_pdata, - }, - .resource = da830_evm_aemif_resource, - .num_resources = ARRAY_SIZE(da830_evm_aemif_resource), -}; - -/* - * UI board NAND/NOR flashes only use 8-bit data bus. - */ -static const short da830_evm_emif25_pins[] = { - DA830_EMA_D_0, DA830_EMA_D_1, DA830_EMA_D_2, DA830_EMA_D_3, - DA830_EMA_D_4, DA830_EMA_D_5, DA830_EMA_D_6, DA830_EMA_D_7, - DA830_EMA_A_0, DA830_EMA_A_1, DA830_EMA_A_2, DA830_EMA_A_3, - DA830_EMA_A_4, DA830_EMA_A_5, DA830_EMA_A_6, DA830_EMA_A_7, - DA830_EMA_A_8, DA830_EMA_A_9, DA830_EMA_A_10, DA830_EMA_A_11, - DA830_EMA_A_12, DA830_EMA_BA_0, DA830_EMA_BA_1, DA830_NEMA_WE, - DA830_NEMA_CS_2, DA830_NEMA_CS_3, DA830_NEMA_OE, DA830_EMA_WAIT_0, - -1 -}; - -static inline void da830_evm_init_nand(int mux_mode) -{ - int ret; - - if (HAS_MMC) { - pr_warn("WARNING: both MMC/SD and NAND are enabled, but they share AEMIF pins\n" - "\tDisable MMC/SD for NAND support\n"); - return; - } - - ret = davinci_cfg_reg_list(da830_evm_emif25_pins); - if (ret) - pr_warn("%s: emif25 mux setup failed: %d\n", __func__, ret); - - ret = platform_device_register(&da830_evm_aemif_device); - if (ret) - pr_warn("%s: AEMIF device not registered\n", __func__); - - gpio_direction_output(mux_mode, 1); -} -#else -static inline void da830_evm_init_nand(int mux_mode) { } -#endif - -#ifdef CONFIG_DA830_UI_LCD -static inline void da830_evm_init_lcdc(int mux_mode) -{ - int ret; - - ret = davinci_cfg_reg_list(da830_lcdcntl_pins); - if (ret) - pr_warn("%s: lcdcntl mux setup failed: %d\n", __func__, ret); - - ret = da8xx_register_lcdc(&sharp_lcd035q3dg01_pdata); - if (ret) - pr_warn("%s: lcd setup failed: %d\n", __func__, ret); - - gpio_direction_output(mux_mode, 0); -} -#else -static inline void da830_evm_init_lcdc(int mux_mode) { } -#endif - -static struct nvmem_cell_info da830_evm_nvmem_cells[] = { - { - .name = "macaddr", - .offset = 0x7f00, - .bytes = ETH_ALEN, - } -}; - -static struct nvmem_cell_table da830_evm_nvmem_cell_table = { - .nvmem_name = "1-00500", - .cells = da830_evm_nvmem_cells, - .ncells = ARRAY_SIZE(da830_evm_nvmem_cells), -}; - -static struct nvmem_cell_lookup da830_evm_nvmem_cell_lookup = { - .nvmem_name = "1-00500", - .cell_name = "macaddr", - .dev_id = "davinci_emac.1", - .con_id = "mac-address", -}; - -static const struct property_entry da830_evm_i2c_eeprom_properties[] = { - PROPERTY_ENTRY_U32("pagesize", 64), - { } -}; - -static const struct software_node da830_evm_i2c_eeprom_node = { - .properties = da830_evm_i2c_eeprom_properties, -}; - -static int __init da830_evm_ui_expander_setup(struct i2c_client *client, - int gpio, unsigned ngpio, void *context) -{ - gpio_request(gpio + 6, "UI MUX_MODE"); - - /* Drive mux mode low to match the default without UI card */ - gpio_direction_output(gpio + 6, 0); - - da830_evm_init_lcdc(gpio + 6); - - da830_evm_init_nand(gpio + 6); - - return 0; -} - -static void da830_evm_ui_expander_teardown(struct i2c_client *client, int gpio, - unsigned ngpio, void *context) -{ - gpio_free(gpio + 6); -} - -static struct pcf857x_platform_data __initdata da830_evm_ui_expander_info = { - .gpio_base = DAVINCI_N_GPIO, - .setup = da830_evm_ui_expander_setup, - .teardown = da830_evm_ui_expander_teardown, -}; - -static struct i2c_board_info __initdata da830_evm_i2c_devices[] = { - { - I2C_BOARD_INFO("24c256", 0x50), - .swnode = &da830_evm_i2c_eeprom_node, - }, - { - I2C_BOARD_INFO("tlv320aic3x", 0x18), - }, - { - I2C_BOARD_INFO("pcf8574", 0x3f), - .platform_data = &da830_evm_ui_expander_info, - }, -}; - -static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata = { - .bus_freq = 100, /* kHz */ - .bus_delay = 0, /* usec */ -}; - -/* - * The following EDMA channels/slots are not being used by drivers (for - * example: Timer, GPIO, UART events etc) on da830/omap-l137 EVM, hence - * they are being reserved for codecs on the DSP side. - */ -static const s16 da830_dma_rsv_chans[][2] = { - /* (offset, number) */ - { 8, 2}, - {12, 2}, - {24, 4}, - {30, 2}, - {-1, -1} -}; - -static const s16 da830_dma_rsv_slots[][2] = { - /* (offset, number) */ - { 8, 2}, - {12, 2}, - {24, 4}, - {30, 26}, - {-1, -1} -}; - -static struct edma_rsv_info da830_edma_rsv[] = { - { - .rsv_chans = da830_dma_rsv_chans, - .rsv_slots = da830_dma_rsv_slots, - }, -}; - -static struct mtd_partition da830evm_spiflash_part[] = { - [0] = { - .name = "DSP-UBL", - .offset = 0, - .size = SZ_8K, - .mask_flags = MTD_WRITEABLE, - }, - [1] = { - .name = "ARM-UBL", - .offset = MTDPART_OFS_APPEND, - .size = SZ_16K + SZ_8K, - .mask_flags = MTD_WRITEABLE, - }, - [2] = { - .name = "U-Boot", - .offset = MTDPART_OFS_APPEND, - .size = SZ_256K - SZ_32K, - .mask_flags = MTD_WRITEABLE, - }, - [3] = { - .name = "U-Boot-Environment", - .offset = MTDPART_OFS_APPEND, - .size = SZ_16K, - .mask_flags = 0, - }, - [4] = { - .name = "Kernel", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0, - }, -}; - -static struct flash_platform_data da830evm_spiflash_data = { - .name = "m25p80", - .parts = da830evm_spiflash_part, - .nr_parts = ARRAY_SIZE(da830evm_spiflash_part), - .type = "w25x32", -}; - -static struct davinci_spi_config da830evm_spiflash_cfg = { - .io_type = SPI_IO_TYPE_DMA, - .c2tdelay = 8, - .t2cdelay = 8, -}; - -static struct spi_board_info da830evm_spi_info[] = { - { - .modalias = "m25p80", - .platform_data = &da830evm_spiflash_data, - .controller_data = &da830evm_spiflash_cfg, - .mode = SPI_MODE_0, - .max_speed_hz = 30000000, - .bus_num = 0, - .chip_select = 0, - }, -}; - -static __init void da830_evm_init(void) -{ - struct davinci_soc_info *soc_info = &davinci_soc_info; - int ret; - - da830_register_clocks(); - - ret = da830_register_gpio(); - if (ret) - pr_warn("%s: GPIO init failed: %d\n", __func__, ret); - - ret = da830_register_edma(da830_edma_rsv); - if (ret) - pr_warn("%s: edma registration failed: %d\n", __func__, ret); - - ret = davinci_cfg_reg_list(da830_i2c0_pins); - if (ret) - pr_warn("%s: i2c0 mux setup failed: %d\n", __func__, ret); - - ret = da8xx_register_i2c(0, &da830_evm_i2c_0_pdata); - if (ret) - pr_warn("%s: i2c0 registration failed: %d\n", __func__, ret); - - da830_evm_usb_init(); - - soc_info->emac_pdata->rmii_en = 1; - soc_info->emac_pdata->phy_id = DA830_EVM_PHY_ID; - - ret = davinci_cfg_reg_list(da830_cpgmac_pins); - if (ret) - pr_warn("%s: cpgmac mux setup failed: %d\n", __func__, ret); - - ret = da8xx_register_emac(); - if (ret) - pr_warn("%s: emac registration failed: %d\n", __func__, ret); - - ret = da8xx_register_watchdog(); - if (ret) - pr_warn("%s: watchdog registration failed: %d\n", - __func__, ret); - - davinci_serial_init(da8xx_serial_device); - - nvmem_add_cell_table(&da830_evm_nvmem_cell_table); - nvmem_add_cell_lookups(&da830_evm_nvmem_cell_lookup, 1); - - i2c_register_board_info(1, da830_evm_i2c_devices, - ARRAY_SIZE(da830_evm_i2c_devices)); - - ret = davinci_cfg_reg_list(da830_evm_mcasp1_pins); - if (ret) - pr_warn("%s: mcasp1 mux setup failed: %d\n", __func__, ret); - - da8xx_register_mcasp(1, &da830_evm_snd_data); - - da830_evm_init_mmc(); - - ret = da8xx_register_rtc(); - if (ret) - pr_warn("%s: rtc setup failed: %d\n", __func__, ret); - - ret = spi_register_board_info(da830evm_spi_info, - ARRAY_SIZE(da830evm_spi_info)); - if (ret) - pr_warn("%s: spi info registration failed: %d\n", - __func__, ret); - - ret = da8xx_register_spi_bus(0, ARRAY_SIZE(da830evm_spi_info)); - if (ret) - pr_warn("%s: spi 0 registration failed: %d\n", __func__, ret); - - regulator_has_full_constraints(); -} - -#ifdef CONFIG_SERIAL_8250_CONSOLE -static int __init da830_evm_console_init(void) -{ - if (!machine_is_davinci_da830_evm()) - return 0; - - return add_preferred_console("ttyS", 2, "115200"); -} -console_initcall(da830_evm_console_init); -#endif - -static void __init da830_evm_map_io(void) -{ - da830_init(); -} - -MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM") - .atag_offset = 0x100, - .map_io = da830_evm_map_io, - .init_irq = da830_init_irq, - .init_time = da830_init_time, - .init_machine = da830_evm_init, - .init_late = davinci_init_late, - .dma_zone_size = SZ_128M, -MACHINE_END diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c deleted file mode 100644 index d752ee2b30ff..000000000000 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ /dev/null @@ -1,1550 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * TI DA850/OMAP-L138 EVM board - * - * Copyright (C) 2009 Texas Instruments Incorporated - https://www.ti.com/ - * - * Derived from: arch/arm/mach-davinci/board-da830-evm.c - * Original Copyrights follow: - * - * 2007, 2009 (c) MontaVista Software, Inc. - */ -#include <linux/console.h> -#include <linux/delay.h> -#include <linux/gpio.h> -#include <linux/gpio_keys.h> -#include <linux/gpio/machine.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/leds.h> -#include <linux/i2c.h> -#include <linux/platform_data/pca953x.h> -#include <linux/input.h> -#include <linux/input/tps6507x-ts.h> -#include <linux/mfd/tps6507x.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/rawnand.h> -#include <linux/mtd/partitions.h> -#include <linux/nvmem-provider.h> -#include <linux/mtd/physmap.h> -#include <linux/platform_device.h> -#include <linux/platform_data/gpio-davinci.h> -#include <linux/platform_data/mtd-davinci.h> -#include <linux/platform_data/mtd-davinci-aemif.h> -#include <linux/platform_data/ti-aemif.h> -#include <linux/platform_data/spi-davinci.h> -#include <linux/platform_data/uio_pruss.h> -#include <linux/property.h> -#include <linux/regulator/machine.h> -#include <linux/regulator/tps6507x.h> -#include <linux/regulator/fixed.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> - -#include "common.h" -#include "da8xx.h" -#include "mux.h" -#include "irqs.h" -#include "sram.h" - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/system_info.h> - -#include <media/i2c/tvp514x.h> -#include <media/i2c/adv7343.h> - -#define DA850_EVM_PHY_ID "davinci_mdio-0:00" -#define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8) -#define DA850_LCD_BL_PIN GPIO_TO_PIN(2, 15) - -#define DA850_MII_MDIO_CLKEN_PIN GPIO_TO_PIN(2, 6) - -static struct mtd_partition da850evm_spiflash_part[] = { - [0] = { - .name = "UBL", - .offset = 0, - .size = SZ_64K, - .mask_flags = MTD_WRITEABLE, - }, - [1] = { - .name = "U-Boot", - .offset = MTDPART_OFS_APPEND, - .size = SZ_512K, - .mask_flags = MTD_WRITEABLE, - }, - [2] = { - .name = "U-Boot-Env", - .offset = MTDPART_OFS_APPEND, - .size = SZ_64K, - .mask_flags = MTD_WRITEABLE, - }, - [3] = { - .name = "Kernel", - .offset = MTDPART_OFS_APPEND, - .size = SZ_2M + SZ_512K, - .mask_flags = 0, - }, - [4] = { - .name = "Filesystem", - .offset = MTDPART_OFS_APPEND, - .size = SZ_4M, - .mask_flags = 0, - }, - [5] = { - .name = "MAC-Address", - .offset = SZ_8M - SZ_64K, - .size = SZ_64K, - .mask_flags = MTD_WRITEABLE, - }, -}; - -static struct nvmem_cell_info da850evm_nvmem_cells[] = { - { - .name = "macaddr", - .offset = 0x0, - .bytes = ETH_ALEN, - } -}; - -static struct nvmem_cell_table da850evm_nvmem_cell_table = { - /* - * The nvmem name differs from the partition name because of the - * internal works of the nvmem framework. - */ - .nvmem_name = "MAC-Address0", - .cells = da850evm_nvmem_cells, - .ncells = ARRAY_SIZE(da850evm_nvmem_cells), -}; - -static struct nvmem_cell_lookup da850evm_nvmem_cell_lookup = { - .nvmem_name = "MAC-Address0", - .cell_name = "macaddr", - .dev_id = "davinci_emac.1", - .con_id = "mac-address", -}; - -static struct flash_platform_data da850evm_spiflash_data = { - .name = "m25p80", - .parts = da850evm_spiflash_part, - .nr_parts = ARRAY_SIZE(da850evm_spiflash_part), - .type = "m25p64", -}; - -static struct davinci_spi_config da850evm_spiflash_cfg = { - .io_type = SPI_IO_TYPE_DMA, - .c2tdelay = 8, - .t2cdelay = 8, -}; - -static struct spi_board_info da850evm_spi_info[] = { - { - .modalias = "m25p80", - .platform_data = &da850evm_spiflash_data, - .controller_data = &da850evm_spiflash_cfg, - .mode = SPI_MODE_0, - .max_speed_hz = 30000000, - .bus_num = 1, - .chip_select = 0, - }, -}; - -static struct mtd_partition da850_evm_norflash_partition[] = { - { - .name = "bootloaders + env", - .offset = 0, - .size = SZ_512K, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = SZ_2M, - .mask_flags = 0, - }, - { - .name = "filesystem", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0, - }, -}; - -static struct physmap_flash_data da850_evm_norflash_data = { - .width = 2, - .parts = da850_evm_norflash_partition, - .nr_parts = ARRAY_SIZE(da850_evm_norflash_partition), -}; - -static struct resource da850_evm_norflash_resource[] = { - { - .start = DA8XX_AEMIF_CS2_BASE, - .end = DA8XX_AEMIF_CS2_BASE + SZ_32M - 1, - .flags = IORESOURCE_MEM, - }, -}; - -/* DA850/OMAP-L138 EVM includes a 512 MByte large-page NAND flash - * (128K blocks). It may be used instead of the (default) SPI flash - * to boot, using TI's tools to install the secondary boot loader - * (UBL) and U-Boot. - */ -static struct mtd_partition da850_evm_nandflash_partition[] = { - { - .name = "u-boot env", - .offset = 0, - .size = SZ_128K, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "UBL", - .offset = MTDPART_OFS_APPEND, - .size = SZ_128K, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "u-boot", - .offset = MTDPART_OFS_APPEND, - .size = 4 * SZ_128K, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "kernel", - .offset = 0x200000, - .size = SZ_2M, - .mask_flags = 0, - }, - { - .name = "filesystem", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0, - }, -}; - -static struct davinci_aemif_timing da850_evm_nandflash_timing = { - .wsetup = 24, - .wstrobe = 21, - .whold = 14, - .rsetup = 19, - .rstrobe = 50, - .rhold = 0, - .ta = 20, -}; - -static struct davinci_nand_pdata da850_evm_nandflash_data = { - .core_chipsel = 1, - .parts = da850_evm_nandflash_partition, - .nr_parts = ARRAY_SIZE(da850_evm_nandflash_partition), - .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST, - .ecc_bits = 4, - .bbt_options = NAND_BBT_USE_FLASH, - .timing = &da850_evm_nandflash_timing, -}; - -static struct resource da850_evm_nandflash_resource[] = { - { - .start = DA8XX_AEMIF_CS3_BASE, - .end = DA8XX_AEMIF_CS3_BASE + SZ_512K + 2 * SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = DA8XX_AEMIF_CTL_BASE, - .end = DA8XX_AEMIF_CTL_BASE + SZ_32K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct resource da850_evm_aemif_resource[] = { - { - .start = DA8XX_AEMIF_CTL_BASE, - .end = DA8XX_AEMIF_CTL_BASE + SZ_32K, - .flags = IORESOURCE_MEM, - } -}; - -static struct aemif_abus_data da850_evm_aemif_abus_data[] = { - { - .cs = 3, - } -}; - -static struct platform_device da850_evm_aemif_devices[] = { - { - .name = "davinci_nand", - .id = 1, - .dev = { - .platform_data = &da850_evm_nandflash_data, - }, - .num_resources = ARRAY_SIZE(da850_evm_nandflash_resource), - .resource = da850_evm_nandflash_resource, - }, - { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &da850_evm_norflash_data, - }, - .num_resources = 1, - .resource = da850_evm_norflash_resource, - } -}; - -static struct aemif_platform_data da850_evm_aemif_pdata = { - .cs_offset = 2, - .abus_data = da850_evm_aemif_abus_data, - .num_abus_data = ARRAY_SIZE(da850_evm_aemif_abus_data), - .sub_devices = da850_evm_aemif_devices, - .num_sub_devices = ARRAY_SIZE(da850_evm_aemif_devices), -}; - -static struct platform_device da850_evm_aemif_device = { - .name = "ti-aemif", - .id = -1, - .dev = { - .platform_data = &da850_evm_aemif_pdata, - }, - .resource = da850_evm_aemif_resource, - .num_resources = ARRAY_SIZE(da850_evm_aemif_resource), -}; - -static const short da850_evm_nand_pins[] = { - DA850_EMA_D_0, DA850_EMA_D_1, DA850_EMA_D_2, DA850_EMA_D_3, - DA850_EMA_D_4, DA850_EMA_D_5, DA850_EMA_D_6, DA850_EMA_D_7, - DA850_EMA_A_1, DA850_EMA_A_2, DA850_NEMA_CS_3, DA850_NEMA_CS_4, - DA850_NEMA_WE, DA850_NEMA_OE, - -1 -}; - -static const short da850_evm_nor_pins[] = { - DA850_EMA_BA_1, DA850_EMA_CLK, DA850_EMA_WAIT_1, DA850_NEMA_CS_2, - DA850_NEMA_WE, DA850_NEMA_OE, DA850_EMA_D_0, DA850_EMA_D_1, - DA850_EMA_D_2, DA850_EMA_D_3, DA850_EMA_D_4, DA850_EMA_D_5, - DA850_EMA_D_6, DA850_EMA_D_7, DA850_EMA_D_8, DA850_EMA_D_9, - DA850_EMA_D_10, DA850_EMA_D_11, DA850_EMA_D_12, DA850_EMA_D_13, - DA850_EMA_D_14, DA850_EMA_D_15, DA850_EMA_A_0, DA850_EMA_A_1, - DA850_EMA_A_2, DA850_EMA_A_3, DA850_EMA_A_4, DA850_EMA_A_5, - DA850_EMA_A_6, DA850_EMA_A_7, DA850_EMA_A_8, DA850_EMA_A_9, - DA850_EMA_A_10, DA850_EMA_A_11, DA850_EMA_A_12, DA850_EMA_A_13, - DA850_EMA_A_14, DA850_EMA_A_15, DA850_EMA_A_16, DA850_EMA_A_17, - DA850_EMA_A_18, DA850_EMA_A_19, DA850_EMA_A_20, DA850_EMA_A_21, - DA850_EMA_A_22, DA850_EMA_A_23, - -1 -}; - -#define HAS_MMC IS_ENABLED(CONFIG_MMC_DAVINCI) - -static inline void da850_evm_setup_nor_nand(void) -{ - int ret = 0; - - if (!HAS_MMC) { - ret = davinci_cfg_reg_list(da850_evm_nand_pins); - if (ret) - pr_warn("%s: NAND mux setup failed: %d\n", - __func__, ret); - - ret = davinci_cfg_reg_list(da850_evm_nor_pins); - if (ret) - pr_warn("%s: NOR mux setup failed: %d\n", - __func__, ret); - - ret = platform_device_register(&da850_evm_aemif_device); - if (ret) - pr_warn("%s: registering aemif failed: %d\n", - __func__, ret); - } -} - -#ifdef CONFIG_DA850_UI_RMII -static inline void da850_evm_setup_emac_rmii(int rmii_sel) -{ - struct davinci_soc_info *soc_info = &davinci_soc_info; - - soc_info->emac_pdata->rmii_en = 1; - gpio_set_value_cansleep(rmii_sel, 0); -} -#else -static inline void da850_evm_setup_emac_rmii(int rmii_sel) { } -#endif - - -#define DA850_KEYS_DEBOUNCE_MS 10 -/* - * At 200ms polling interval it is possible to miss an - * event by tapping very lightly on the push button but most - * pushes do result in an event; longer intervals require the - * user to hold the button whereas shorter intervals require - * more CPU time for polling. - */ -#define DA850_GPIO_KEYS_POLL_MS 200 - -enum da850_evm_ui_exp_pins { - DA850_EVM_UI_EXP_SEL_C = 5, - DA850_EVM_UI_EXP_SEL_B, - DA850_EVM_UI_EXP_SEL_A, - DA850_EVM_UI_EXP_PB8, - DA850_EVM_UI_EXP_PB7, - DA850_EVM_UI_EXP_PB6, - DA850_EVM_UI_EXP_PB5, - DA850_EVM_UI_EXP_PB4, - DA850_EVM_UI_EXP_PB3, - DA850_EVM_UI_EXP_PB2, - DA850_EVM_UI_EXP_PB1, -}; - -static const char * const da850_evm_ui_exp[] = { - [DA850_EVM_UI_EXP_SEL_C] = "sel_c", - [DA850_EVM_UI_EXP_SEL_B] = "sel_b", - [DA850_EVM_UI_EXP_SEL_A] = "sel_a", - [DA850_EVM_UI_EXP_PB8] = "pb8", - [DA850_EVM_UI_EXP_PB7] = "pb7", - [DA850_EVM_UI_EXP_PB6] = "pb6", - [DA850_EVM_UI_EXP_PB5] = "pb5", - [DA850_EVM_UI_EXP_PB4] = "pb4", - [DA850_EVM_UI_EXP_PB3] = "pb3", - [DA850_EVM_UI_EXP_PB2] = "pb2", - [DA850_EVM_UI_EXP_PB1] = "pb1", -}; - -#define DA850_N_UI_PB 8 - -static struct gpio_keys_button da850_evm_ui_keys[] = { - [0 ... DA850_N_UI_PB - 1] = { - .type = EV_KEY, - .active_low = 1, - .wakeup = 0, - .debounce_interval = DA850_KEYS_DEBOUNCE_MS, - .code = -1, /* assigned at runtime */ - .gpio = -1, /* assigned at runtime */ - .desc = NULL, /* assigned at runtime */ - }, -}; - -static struct gpio_keys_platform_data da850_evm_ui_keys_pdata = { - .buttons = da850_evm_ui_keys, - .nbuttons = ARRAY_SIZE(da850_evm_ui_keys), - .poll_interval = DA850_GPIO_KEYS_POLL_MS, -}; - -static struct platform_device da850_evm_ui_keys_device = { - .name = "gpio-keys-polled", - .id = 0, - .dev = { - .platform_data = &da850_evm_ui_keys_pdata - }, -}; - -static void da850_evm_ui_keys_init(unsigned gpio) -{ - int i; - struct gpio_keys_button *button; - - for (i = 0; i < DA850_N_UI_PB; i++) { - button = &da850_evm_ui_keys[i]; - button->code = KEY_F8 - i; - button->desc = da850_evm_ui_exp[DA850_EVM_UI_EXP_PB8 + i]; - button->gpio = gpio + DA850_EVM_UI_EXP_PB8 + i; - } -} - -#ifdef CONFIG_DA850_UI_SD_VIDEO_PORT -static inline void da850_evm_setup_video_port(int video_sel) -{ - gpio_set_value_cansleep(video_sel, 0); -} -#else -static inline void da850_evm_setup_video_port(int video_sel) { } -#endif - -static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio, - unsigned ngpio, void *c) -{ - int sel_a, sel_b, sel_c, ret; - - sel_a = gpio + DA850_EVM_UI_EXP_SEL_A; - sel_b = gpio + DA850_EVM_UI_EXP_SEL_B; - sel_c = gpio + DA850_EVM_UI_EXP_SEL_C; - - ret = gpio_request(sel_a, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_A]); - if (ret) { - pr_warn("Cannot open UI expander pin %d\n", sel_a); - goto exp_setup_sela_fail; - } - - ret = gpio_request(sel_b, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_B]); - if (ret) { - pr_warn("Cannot open UI expander pin %d\n", sel_b); - goto exp_setup_selb_fail; - } - - ret = gpio_request(sel_c, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_C]); - if (ret) { - pr_warn("Cannot open UI expander pin %d\n", sel_c); - goto exp_setup_selc_fail; - } - - /* deselect all functionalities */ - gpio_direction_output(sel_a, 1); - gpio_direction_output(sel_b, 1); - gpio_direction_output(sel_c, 1); - - da850_evm_ui_keys_init(gpio); - ret = platform_device_register(&da850_evm_ui_keys_device); - if (ret) { - pr_warn("Could not register UI GPIO expander push-buttons"); - goto exp_setup_keys_fail; - } - - pr_info("DA850/OMAP-L138 EVM UI card detected\n"); - - da850_evm_setup_nor_nand(); - - da850_evm_setup_emac_rmii(sel_a); - - da850_evm_setup_video_port(sel_c); - - return 0; - -exp_setup_keys_fail: - gpio_free(sel_c); -exp_setup_selc_fail: - gpio_free(sel_b); -exp_setup_selb_fail: - gpio_free(sel_a); -exp_setup_sela_fail: - return ret; -} - -static void da850_evm_ui_expander_teardown(struct i2c_client *client, - unsigned gpio, unsigned ngpio, void *c) -{ - platform_device_unregister(&da850_evm_ui_keys_device); - - /* deselect all functionalities */ - gpio_set_value_cansleep(gpio + DA850_EVM_UI_EXP_SEL_C, 1); - gpio_set_value_cansleep(gpio + DA850_EVM_UI_EXP_SEL_B, 1); - gpio_set_value_cansleep(gpio + DA850_EVM_UI_EXP_SEL_A, 1); - - gpio_free(gpio + DA850_EVM_UI_EXP_SEL_C); - gpio_free(gpio + DA850_EVM_UI_EXP_SEL_B); - gpio_free(gpio + DA850_EVM_UI_EXP_SEL_A); -} - -/* assign the baseboard expander's GPIOs after the UI board's */ -#define DA850_UI_EXPANDER_N_GPIOS ARRAY_SIZE(da850_evm_ui_exp) -#define DA850_BB_EXPANDER_GPIO_BASE (DAVINCI_N_GPIO + DA850_UI_EXPANDER_N_GPIOS) - -enum da850_evm_bb_exp_pins { - DA850_EVM_BB_EXP_DEEP_SLEEP_EN = 0, - DA850_EVM_BB_EXP_SW_RST, - DA850_EVM_BB_EXP_TP_23, - DA850_EVM_BB_EXP_TP_22, - DA850_EVM_BB_EXP_TP_21, - DA850_EVM_BB_EXP_USER_PB1, - DA850_EVM_BB_EXP_USER_LED2, - DA850_EVM_BB_EXP_USER_LED1, - DA850_EVM_BB_EXP_USER_SW1, - DA850_EVM_BB_EXP_USER_SW2, - DA850_EVM_BB_EXP_USER_SW3, - DA850_EVM_BB_EXP_USER_SW4, - DA850_EVM_BB_EXP_USER_SW5, - DA850_EVM_BB_EXP_USER_SW6, - DA850_EVM_BB_EXP_USER_SW7, - DA850_EVM_BB_EXP_USER_SW8 -}; - -static const char * const da850_evm_bb_exp[] = { - [DA850_EVM_BB_EXP_DEEP_SLEEP_EN] = "deep_sleep_en", - [DA850_EVM_BB_EXP_SW_RST] = "sw_rst", - [DA850_EVM_BB_EXP_TP_23] = "tp_23", - [DA850_EVM_BB_EXP_TP_22] = "tp_22", - [DA850_EVM_BB_EXP_TP_21] = "tp_21", - [DA850_EVM_BB_EXP_USER_PB1] = "user_pb1", - [DA850_EVM_BB_EXP_USER_LED2] = "user_led2", - [DA850_EVM_BB_EXP_USER_LED1] = "user_led1", - [DA850_EVM_BB_EXP_USER_SW1] = "user_sw1", - [DA850_EVM_BB_EXP_USER_SW2] = "user_sw2", - [DA850_EVM_BB_EXP_USER_SW3] = "user_sw3", - [DA850_EVM_BB_EXP_USER_SW4] = "user_sw4", - [DA850_EVM_BB_EXP_USER_SW5] = "user_sw5", - [DA850_EVM_BB_EXP_USER_SW6] = "user_sw6", - [DA850_EVM_BB_EXP_USER_SW7] = "user_sw7", - [DA850_EVM_BB_EXP_USER_SW8] = "user_sw8", -}; - -#define DA850_N_BB_USER_SW 8 - -static struct gpio_keys_button da850_evm_bb_keys[] = { - [0] = { - .type = EV_KEY, - .active_low = 1, - .wakeup = 0, - .debounce_interval = DA850_KEYS_DEBOUNCE_MS, - .code = KEY_PROG1, - .desc = NULL, /* assigned at runtime */ - .gpio = -1, /* assigned at runtime */ - }, - [1 ... DA850_N_BB_USER_SW] = { - .type = EV_SW, - .active_low = 1, - .wakeup = 0, - .debounce_interval = DA850_KEYS_DEBOUNCE_MS, - .code = -1, /* assigned at runtime */ - .desc = NULL, /* assigned at runtime */ - .gpio = -1, /* assigned at runtime */ - }, -}; - -static struct gpio_keys_platform_data da850_evm_bb_keys_pdata = { - .buttons = da850_evm_bb_keys, - .nbuttons = ARRAY_SIZE(da850_evm_bb_keys), - .poll_interval = DA850_GPIO_KEYS_POLL_MS, -}; - -static struct platform_device da850_evm_bb_keys_device = { - .name = "gpio-keys-polled", - .id = 1, - .dev = { - .platform_data = &da850_evm_bb_keys_pdata - }, -}; - -static void da850_evm_bb_keys_init(unsigned gpio) -{ - int i; - struct gpio_keys_button *button; - - button = &da850_evm_bb_keys[0]; - button->desc = da850_evm_bb_exp[DA850_EVM_BB_EXP_USER_PB1]; - button->gpio = gpio + DA850_EVM_BB_EXP_USER_PB1; - - for (i = 0; i < DA850_N_BB_USER_SW; i++) { - button = &da850_evm_bb_keys[i + 1]; - button->code = SW_LID + i; - button->desc = da850_evm_bb_exp[DA850_EVM_BB_EXP_USER_SW1 + i]; - button->gpio = gpio + DA850_EVM_BB_EXP_USER_SW1 + i; - } -} - -static struct gpio_led da850_evm_bb_leds[] = { - { - .name = "user_led2", - }, - { - .name = "user_led1", - }, -}; - -static struct gpio_led_platform_data da850_evm_bb_leds_pdata = { - .leds = da850_evm_bb_leds, - .num_leds = ARRAY_SIZE(da850_evm_bb_leds), -}; - -static struct gpiod_lookup_table da850_evm_bb_leds_gpio_table = { - .dev_id = "leds-gpio", - .table = { - GPIO_LOOKUP_IDX("i2c-bb-expander", - DA850_EVM_BB_EXP_USER_LED2, NULL, - 0, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("i2c-bb-expander", - DA850_EVM_BB_EXP_USER_LED2 + 1, NULL, - 1, GPIO_ACTIVE_LOW), - - { }, - }, -}; - -static struct platform_device da850_evm_bb_leds_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &da850_evm_bb_leds_pdata - } -}; - -static int da850_evm_bb_expander_setup(struct i2c_client *client, - unsigned gpio, unsigned ngpio, - void *c) -{ - int ret; - - /* - * Register the switches and pushbutton on the baseboard as a gpio-keys - * device. - */ - da850_evm_bb_keys_init(gpio); - ret = platform_device_register(&da850_evm_bb_keys_device); - if (ret) { - pr_warn("Could not register baseboard GPIO expander keys"); - goto io_exp_setup_sw_fail; - } - - gpiod_add_lookup_table(&da850_evm_bb_leds_gpio_table); - ret = platform_device_register(&da850_evm_bb_leds_device); - if (ret) { - pr_warn("Could not register baseboard GPIO expander LEDs"); - goto io_exp_setup_leds_fail; - } - - return 0; - -io_exp_setup_leds_fail: - platform_device_unregister(&da850_evm_bb_keys_device); -io_exp_setup_sw_fail: - return ret; -} - -static void da850_evm_bb_expander_teardown(struct i2c_client *client, - unsigned gpio, unsigned ngpio, void *c) -{ - platform_device_unregister(&da850_evm_bb_leds_device); - platform_device_unregister(&da850_evm_bb_keys_device); -} - -static struct pca953x_platform_data da850_evm_ui_expander_info = { - .gpio_base = DAVINCI_N_GPIO, - .setup = da850_evm_ui_expander_setup, - .teardown = da850_evm_ui_expander_teardown, - .names = da850_evm_ui_exp, -}; - -static struct pca953x_platform_data da850_evm_bb_expander_info = { - .gpio_base = DA850_BB_EXPANDER_GPIO_BASE, - .setup = da850_evm_bb_expander_setup, - .teardown = da850_evm_bb_expander_teardown, - .names = da850_evm_bb_exp, -}; - -static struct i2c_board_info __initdata da850_evm_i2c_devices[] = { - { - I2C_BOARD_INFO("tlv320aic3x", 0x18), - }, - { - I2C_BOARD_INFO("tca6416", 0x20), - .dev_name = "ui-expander", - .platform_data = &da850_evm_ui_expander_info, - }, - { - I2C_BOARD_INFO("tca6416", 0x21), - .dev_name = "bb-expander", - .platform_data = &da850_evm_bb_expander_info, - }, -}; - -static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = { - .bus_freq = 100, /* kHz */ - .bus_delay = 0, /* usec */ -}; - -/* davinci da850 evm audio machine driver */ -static u8 da850_iis_serializer_direction[] = { - INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, - INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, - INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, TX_MODE, - RX_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, -}; - -static struct snd_platform_data da850_evm_snd_data = { - .tx_dma_offset = 0x2000, - .rx_dma_offset = 0x2000, - .op_mode = DAVINCI_MCASP_IIS_MODE, - .num_serializer = ARRAY_SIZE(da850_iis_serializer_direction), - .tdm_slots = 2, - .serial_dir = da850_iis_serializer_direction, - .asp_chan_q = EVENTQ_0, - .ram_chan_q = EVENTQ_1, - .version = MCASP_VERSION_2, - .txnumevt = 1, - .rxnumevt = 1, - .sram_size_playback = SZ_8K, - .sram_size_capture = SZ_8K, -}; - -static const short da850_evm_mcasp_pins[] __initconst = { - DA850_AHCLKX, DA850_ACLKX, DA850_AFSX, - DA850_AHCLKR, DA850_ACLKR, DA850_AFSR, DA850_AMUTE, - DA850_AXR_11, DA850_AXR_12, - -1 -}; - -#define DA850_MMCSD_CD_PIN GPIO_TO_PIN(4, 0) -#define DA850_MMCSD_WP_PIN GPIO_TO_PIN(4, 1) - -static struct gpiod_lookup_table mmc_gpios_table = { - .dev_id = "da830-mmc.0", - .table = { - /* gpio chip 2 contains gpio range 64-95 */ - GPIO_LOOKUP("davinci_gpio", DA850_MMCSD_CD_PIN, "cd", - GPIO_ACTIVE_LOW), - GPIO_LOOKUP("davinci_gpio", DA850_MMCSD_WP_PIN, "wp", - GPIO_ACTIVE_HIGH), - { } - }, -}; - -static struct davinci_mmc_config da850_mmc_config = { - .wires = 4, - .max_freq = 50000000, - .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, -}; - -static const short da850_evm_mmcsd0_pins[] __initconst = { - DA850_MMCSD0_DAT_0, DA850_MMCSD0_DAT_1, DA850_MMCSD0_DAT_2, - DA850_MMCSD0_DAT_3, DA850_MMCSD0_CLK, DA850_MMCSD0_CMD, - DA850_GPIO4_0, DA850_GPIO4_1, - -1 -}; - -static struct property_entry da850_lcd_backlight_props[] = { - PROPERTY_ENTRY_BOOL("default-on"), - { } -}; - -static struct gpiod_lookup_table da850_lcd_backlight_gpio_table = { - .dev_id = "gpio-backlight", - .table = { - GPIO_LOOKUP("davinci_gpio", DA850_LCD_BL_PIN, NULL, 0), - { } - }, -}; - -static const struct platform_device_info da850_lcd_backlight_info = { - .name = "gpio-backlight", - .id = PLATFORM_DEVID_NONE, - .properties = da850_lcd_backlight_props, -}; - -static struct regulator_consumer_supply da850_lcd_supplies[] = { - REGULATOR_SUPPLY("lcd", NULL), -}; - -static struct regulator_init_data da850_lcd_supply_data = { - .consumer_supplies = da850_lcd_supplies, - .num_consumer_supplies = ARRAY_SIZE(da850_lcd_supplies), - .constraints = { - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, -}; - -static struct fixed_voltage_config da850_lcd_supply = { - .supply_name = "lcd", - .microvolts = 33000000, - .init_data = &da850_lcd_supply_data, -}; - -static struct platform_device da850_lcd_supply_device = { - .name = "reg-fixed-voltage", - .id = 1, /* Dummy fixed regulator is 0 */ - .dev = { - .platform_data = &da850_lcd_supply, - }, -}; - -static struct gpiod_lookup_table da850_lcd_supply_gpio_table = { - .dev_id = "reg-fixed-voltage.1", - .table = { - GPIO_LOOKUP("davinci_gpio", DA850_LCD_PWR_PIN, NULL, 0), - { } - }, -}; - -static struct gpiod_lookup_table *da850_lcd_gpio_lookups[] = { - &da850_lcd_backlight_gpio_table, - &da850_lcd_supply_gpio_table, -}; - -static int da850_lcd_hw_init(void) -{ - struct platform_device *backlight; - int status; - - gpiod_add_lookup_tables(da850_lcd_gpio_lookups, - ARRAY_SIZE(da850_lcd_gpio_lookups)); - - backlight = platform_device_register_full(&da850_lcd_backlight_info); - if (IS_ERR(backlight)) - return PTR_ERR(backlight); - - status = platform_device_register(&da850_lcd_supply_device); - if (status) - return status; - - return 0; -} - -/* Fixed regulator support */ -static struct regulator_consumer_supply fixed_supplies[] = { - /* Baseboard 3.3V: 5V -> TPS73701DCQ -> 3.3V */ - REGULATOR_SUPPLY("AVDD", "1-0018"), - REGULATOR_SUPPLY("DRVDD", "1-0018"), - - /* Baseboard 1.8V: 5V -> TPS73701DCQ -> 1.8V */ - REGULATOR_SUPPLY("DVDD", "1-0018"), - - /* UI card 3.3V: 5V -> TPS73701DCQ -> 3.3V */ - REGULATOR_SUPPLY("vcc", "1-0020"), -}; - -/* TPS65070 voltage regulator support */ - -/* 3.3V */ -static struct regulator_consumer_supply tps65070_dcdc1_consumers[] = { - { - .supply = "usb0_vdda33", - }, - { - .supply = "usb1_vdda33", - }, -}; - -/* 3.3V or 1.8V */ -static struct regulator_consumer_supply tps65070_dcdc2_consumers[] = { - { - .supply = "dvdd3318_a", - }, - { - .supply = "dvdd3318_b", - }, - { - .supply = "dvdd3318_c", - }, - REGULATOR_SUPPLY("IOVDD", "1-0018"), -}; - -/* 1.2V */ -static struct regulator_consumer_supply tps65070_dcdc3_consumers[] = { - { - .supply = "cvdd", - }, -}; - -/* 1.8V LDO */ -static struct regulator_consumer_supply tps65070_ldo1_consumers[] = { - { - .supply = "sata_vddr", - }, - { - .supply = "usb0_vdda18", - }, - { - .supply = "usb1_vdda18", - }, - { - .supply = "ddr_dvdd18", - }, -}; - -/* 1.2V LDO */ -static struct regulator_consumer_supply tps65070_ldo2_consumers[] = { - { - .supply = "sata_vdd", - }, - { - .supply = "pll0_vdda", - }, - { - .supply = "pll1_vdda", - }, - { - .supply = "usbs_cvdd", - }, - { - .supply = "vddarnwa1", - }, -}; - -/* We take advantage of the fact that both defdcdc{2,3} are tied high */ -static struct tps6507x_reg_platform_data tps6507x_platform_data = { - .defdcdc_default = true, -}; - -static struct regulator_init_data tps65070_regulator_data[] = { - /* dcdc1 */ - { - .constraints = { - .min_uV = 3150000, - .max_uV = 3450000, - .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS), - .boot_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc1_consumers), - .consumer_supplies = tps65070_dcdc1_consumers, - }, - - /* dcdc2 */ - { - .constraints = { - .min_uV = 1710000, - .max_uV = 3450000, - .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS), - .boot_on = 1, - .always_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc2_consumers), - .consumer_supplies = tps65070_dcdc2_consumers, - .driver_data = &tps6507x_platform_data, - }, - - /* dcdc3 */ - { - .constraints = { - .min_uV = 950000, - .max_uV = 1350000, - .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS), - .boot_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc3_consumers), - .consumer_supplies = tps65070_dcdc3_consumers, - .driver_data = &tps6507x_platform_data, - }, - - /* ldo1 */ - { - .constraints = { - .min_uV = 1710000, - .max_uV = 1890000, - .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS), - .boot_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(tps65070_ldo1_consumers), - .consumer_supplies = tps65070_ldo1_consumers, - }, - - /* ldo2 */ - { - .constraints = { - .min_uV = 1140000, - .max_uV = 1320000, - .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS), - .boot_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(tps65070_ldo2_consumers), - .consumer_supplies = tps65070_ldo2_consumers, - }, -}; - -static struct touchscreen_init_data tps6507x_touchscreen_data = { - .poll_period = 30, /* ms between touch samples */ - .min_pressure = 0x30, /* minimum pressure to trigger touch */ - .vendor = 0, /* /sys/class/input/input?/id/vendor */ - .product = 65070, /* /sys/class/input/input?/id/product */ - .version = 0x100, /* /sys/class/input/input?/id/version */ -}; - -static struct tps6507x_board tps_board = { - .tps6507x_pmic_init_data = &tps65070_regulator_data[0], - .tps6507x_ts_init_data = &tps6507x_touchscreen_data, -}; - -static struct i2c_board_info __initdata da850_evm_tps65070_info[] = { - { - I2C_BOARD_INFO("tps6507x", 0x48), - .platform_data = &tps_board, - }, -}; - -static int __init pmic_tps65070_init(void) -{ - return i2c_register_board_info(1, da850_evm_tps65070_info, - ARRAY_SIZE(da850_evm_tps65070_info)); -} - -static const short da850_evm_lcdc_pins[] = { - DA850_GPIO2_8, DA850_GPIO2_15, - -1 -}; - -static const short da850_evm_mii_pins[] = { - DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3, - DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER, - DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3, - DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK, - DA850_MDIO_D, - -1 -}; - -static const short da850_evm_rmii_pins[] = { - DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN, - DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1, - DA850_RMII_RXER, DA850_RMII_MHZ_50_CLK, DA850_MDIO_CLK, - DA850_MDIO_D, - -1 -}; - -static struct gpiod_hog da850_evm_emac_gpio_hogs[] = { - { - .chip_label = "davinci_gpio", - .chip_hwnum = DA850_MII_MDIO_CLKEN_PIN, - .line_name = "mdio_clk_en", - .lflags = 0, - /* dflags set in da850_evm_config_emac() */ - }, - { } -}; - -static int __init da850_evm_config_emac(void) -{ - void __iomem *cfg_chip3_base; - int ret; - u32 val; - struct davinci_soc_info *soc_info = &davinci_soc_info; - u8 rmii_en; - - if (!machine_is_davinci_da850_evm()) - return 0; - - rmii_en = soc_info->emac_pdata->rmii_en; - - cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG); - - val = __raw_readl(cfg_chip3_base); - - if (rmii_en) { - val |= BIT(8); - ret = davinci_cfg_reg_list(da850_evm_rmii_pins); - pr_info("EMAC: RMII PHY configured, MII PHY will not be" - " functional\n"); - } else { - val &= ~BIT(8); - ret = davinci_cfg_reg_list(da850_evm_mii_pins); - pr_info("EMAC: MII PHY configured, RMII PHY will not be" - " functional\n"); - } - - if (ret) - pr_warn("%s: CPGMAC/RMII mux setup failed: %d\n", - __func__, ret); - - /* configure the CFGCHIP3 register for RMII or MII */ - __raw_writel(val, cfg_chip3_base); - - ret = davinci_cfg_reg(DA850_GPIO2_6); - if (ret) - pr_warn("%s:GPIO(2,6) mux setup failed\n", __func__); - - da850_evm_emac_gpio_hogs[0].dflags = rmii_en ? GPIOD_OUT_HIGH - : GPIOD_OUT_LOW; - gpiod_add_hogs(da850_evm_emac_gpio_hogs); - - soc_info->emac_pdata->phy_id = DA850_EVM_PHY_ID; - - ret = da8xx_register_emac(); - if (ret) - pr_warn("%s: EMAC registration failed: %d\n", __func__, ret); - - return 0; -} -device_initcall(da850_evm_config_emac); - -/* - * The following EDMA channels/slots are not being used by drivers (for - * example: Timer, GPIO, UART events etc) on da850/omap-l138 EVM, hence - * they are being reserved for codecs on the DSP side. - */ -static const s16 da850_dma0_rsv_chans[][2] = { - /* (offset, number) */ - { 8, 6}, - {24, 4}, - {30, 2}, - {-1, -1} -}; - -static const s16 da850_dma0_rsv_slots[][2] = { - /* (offset, number) */ - { 8, 6}, - {24, 4}, - {30, 50}, - {-1, -1} -}; - -static const s16 da850_dma1_rsv_chans[][2] = { - /* (offset, number) */ - { 0, 28}, - {30, 2}, - {-1, -1} -}; - -static const s16 da850_dma1_rsv_slots[][2] = { - /* (offset, number) */ - { 0, 28}, - {30, 90}, - {-1, -1} -}; - -static struct edma_rsv_info da850_edma_cc0_rsv = { - .rsv_chans = da850_dma0_rsv_chans, - .rsv_slots = da850_dma0_rsv_slots, -}; - -static struct edma_rsv_info da850_edma_cc1_rsv = { - .rsv_chans = da850_dma1_rsv_chans, - .rsv_slots = da850_dma1_rsv_slots, -}; - -static struct edma_rsv_info *da850_edma_rsv[2] = { - &da850_edma_cc0_rsv, - &da850_edma_cc1_rsv, -}; - -#ifdef CONFIG_CPU_FREQ -static __init int da850_evm_init_cpufreq(void) -{ - switch (system_rev & 0xF) { - case 3: - da850_max_speed = 456000; - break; - case 2: - da850_max_speed = 408000; - break; - case 1: - da850_max_speed = 372000; - break; - } - - return da850_register_cpufreq("pll0_sysclk3"); -} -#else -static __init int da850_evm_init_cpufreq(void) { return 0; } -#endif - -#if defined(CONFIG_DA850_UI_SD_VIDEO_PORT) - -#define TVP5147_CH0 "tvp514x-0" -#define TVP5147_CH1 "tvp514x-1" - -/* VPIF capture configuration */ -static struct tvp514x_platform_data tvp5146_pdata = { - .clk_polarity = 0, - .hs_polarity = 1, - .vs_polarity = 1, -}; - -#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL) - -static struct vpif_input da850_ch0_inputs[] = { - { - .input = { - .index = 0, - .name = "Composite", - .type = V4L2_INPUT_TYPE_CAMERA, - .capabilities = V4L2_IN_CAP_STD, - .std = TVP514X_STD_ALL, - }, - .input_route = INPUT_CVBS_VI2B, - .output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC, - .subdev_name = TVP5147_CH0, - }, -}; - -static struct vpif_input da850_ch1_inputs[] = { - { - .input = { - .index = 0, - .name = "S-Video", - .type = V4L2_INPUT_TYPE_CAMERA, - .capabilities = V4L2_IN_CAP_STD, - .std = TVP514X_STD_ALL, - }, - .input_route = INPUT_SVIDEO_VI2C_VI1C, - .output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC, - .subdev_name = TVP5147_CH1, - }, -}; - -static struct vpif_subdev_info da850_vpif_capture_sdev_info[] = { - { - .name = TVP5147_CH0, - .board_info = { - I2C_BOARD_INFO("tvp5146", 0x5d), - .platform_data = &tvp5146_pdata, - }, - }, - { - .name = TVP5147_CH1, - .board_info = { - I2C_BOARD_INFO("tvp5146", 0x5c), - .platform_data = &tvp5146_pdata, - }, - }, -}; - -static struct vpif_capture_config da850_vpif_capture_config = { - .subdev_info = da850_vpif_capture_sdev_info, - .subdev_count = ARRAY_SIZE(da850_vpif_capture_sdev_info), - .i2c_adapter_id = 1, - .chan_config[0] = { - .inputs = da850_ch0_inputs, - .input_count = ARRAY_SIZE(da850_ch0_inputs), - .vpif_if = { - .if_type = VPIF_IF_BT656, - .hd_pol = 1, - .vd_pol = 1, - .fid_pol = 0, - }, - }, - .chan_config[1] = { - .inputs = da850_ch1_inputs, - .input_count = ARRAY_SIZE(da850_ch1_inputs), - .vpif_if = { - .if_type = VPIF_IF_BT656, - .hd_pol = 1, - .vd_pol = 1, - .fid_pol = 0, - }, - }, - .card_name = "DA850/OMAP-L138 Video Capture", -}; - -/* VPIF display configuration */ - -static struct adv7343_platform_data adv7343_pdata = { - .mode_config = { - .dac = { 1, 1, 1 }, - }, - .sd_config = { - .sd_dac_out = { 1 }, - }, -}; - -static struct vpif_subdev_info da850_vpif_subdev[] = { - { - .name = "adv7343", - .board_info = { - I2C_BOARD_INFO("adv7343", 0x2a), - .platform_data = &adv7343_pdata, - }, - }, -}; - -static const struct vpif_output da850_ch0_outputs[] = { - { - .output = { - .index = 0, - .name = "Composite", - .type = V4L2_OUTPUT_TYPE_ANALOG, - .capabilities = V4L2_OUT_CAP_STD, - .std = V4L2_STD_ALL, - }, - .subdev_name = "adv7343", - .output_route = ADV7343_COMPOSITE_ID, - }, - { - .output = { - .index = 1, - .name = "S-Video", - .type = V4L2_OUTPUT_TYPE_ANALOG, - .capabilities = V4L2_OUT_CAP_STD, - .std = V4L2_STD_ALL, - }, - .subdev_name = "adv7343", - .output_route = ADV7343_SVIDEO_ID, - }, -}; - -static struct vpif_display_config da850_vpif_display_config = { - .subdevinfo = da850_vpif_subdev, - .subdev_count = ARRAY_SIZE(da850_vpif_subdev), - .chan_config[0] = { - .outputs = da850_ch0_outputs, - .output_count = ARRAY_SIZE(da850_ch0_outputs), - }, - .card_name = "DA850/OMAP-L138 Video Display", - .i2c_adapter_id = 1, -}; - -static __init void da850_vpif_init(void) -{ - int ret; - - ret = da850_register_vpif(); - if (ret) - pr_warn("da850_evm_init: VPIF setup failed: %d\n", ret); - - ret = davinci_cfg_reg_list(da850_vpif_capture_pins); - if (ret) - pr_warn("da850_evm_init: VPIF capture mux setup failed: %d\n", - ret); - - ret = da850_register_vpif_capture(&da850_vpif_capture_config); - if (ret) - pr_warn("da850_evm_init: VPIF capture setup failed: %d\n", ret); - - ret = davinci_cfg_reg_list(da850_vpif_display_pins); - if (ret) - pr_warn("da850_evm_init: VPIF display mux setup failed: %d\n", - ret); - - ret = da850_register_vpif_display(&da850_vpif_display_config); - if (ret) - pr_warn("da850_evm_init: VPIF display setup failed: %d\n", ret); -} - -#else -static __init void da850_vpif_init(void) {} -#endif - -#define DA850EVM_SATA_REFCLKPN_RATE (100 * 1000 * 1000) - -static __init void da850_evm_init(void) -{ - int ret; - - da850_register_clocks(); - - ret = da850_register_gpio(); - if (ret) - pr_warn("%s: GPIO init failed: %d\n", __func__, ret); - - regulator_register_fixed(0, fixed_supplies, ARRAY_SIZE(fixed_supplies)); - - ret = pmic_tps65070_init(); - if (ret) - pr_warn("%s: TPS65070 PMIC init failed: %d\n", __func__, ret); - - ret = da850_register_edma(da850_edma_rsv); - if (ret) - pr_warn("%s: EDMA registration failed: %d\n", __func__, ret); - - ret = davinci_cfg_reg_list(da850_i2c0_pins); - if (ret) - pr_warn("%s: I2C0 mux setup failed: %d\n", __func__, ret); - - ret = da8xx_register_i2c(0, &da850_evm_i2c_0_pdata); - if (ret) - pr_warn("%s: I2C0 registration failed: %d\n", __func__, ret); - - - ret = da8xx_register_watchdog(); - if (ret) - pr_warn("%s: watchdog registration failed: %d\n", - __func__, ret); - - if (HAS_MMC) { - ret = davinci_cfg_reg_list(da850_evm_mmcsd0_pins); - if (ret) - pr_warn("%s: MMCSD0 mux setup failed: %d\n", - __func__, ret); - - gpiod_add_lookup_table(&mmc_gpios_table); - - ret = da8xx_register_mmcsd0(&da850_mmc_config); - if (ret) - pr_warn("%s: MMCSD0 registration failed: %d\n", - __func__, ret); - } - - davinci_serial_init(da8xx_serial_device); - - nvmem_add_cell_table(&da850evm_nvmem_cell_table); - nvmem_add_cell_lookups(&da850evm_nvmem_cell_lookup, 1); - - i2c_register_board_info(1, da850_evm_i2c_devices, - ARRAY_SIZE(da850_evm_i2c_devices)); - - /* - * shut down uart 0 and 1; they are not used on the board and - * accessing them causes endless "too much work in irq53" messages - * with arago fs - */ - __raw_writel(0, IO_ADDRESS(DA8XX_UART1_BASE) + 0x30); - __raw_writel(0, IO_ADDRESS(DA8XX_UART0_BASE) + 0x30); - - ret = davinci_cfg_reg_list(da850_evm_mcasp_pins); - if (ret) - pr_warn("%s: McASP mux setup failed: %d\n", __func__, ret); - - da850_evm_snd_data.sram_pool = sram_get_gen_pool(); - da8xx_register_mcasp(0, &da850_evm_snd_data); - - ret = davinci_cfg_reg_list(da850_lcdcntl_pins); - if (ret) - pr_warn("%s: LCDC mux setup failed: %d\n", __func__, ret); - - ret = da8xx_register_uio_pruss(); - if (ret) - pr_warn("da850_evm_init: pruss initialization failed: %d\n", - ret); - - /* Handle board specific muxing for LCD here */ - ret = davinci_cfg_reg_list(da850_evm_lcdc_pins); - if (ret) - pr_warn("%s: EVM specific LCD mux setup failed: %d\n", - __func__, ret); - - ret = da850_lcd_hw_init(); - if (ret) - pr_warn("%s: LCD initialization failed: %d\n", __func__, ret); - - ret = da8xx_register_lcdc(&sharp_lk043t1dg01_pdata); - if (ret) - pr_warn("%s: LCDC registration failed: %d\n", __func__, ret); - - ret = da8xx_register_rtc(); - if (ret) - pr_warn("%s: RTC setup failed: %d\n", __func__, ret); - - ret = da850_evm_init_cpufreq(); - if (ret) - pr_warn("%s: cpufreq registration failed: %d\n", __func__, ret); - - ret = da8xx_register_cpuidle(); - if (ret) - pr_warn("%s: cpuidle registration failed: %d\n", __func__, ret); - - davinci_pm_init(); - da850_vpif_init(); - - ret = spi_register_board_info(da850evm_spi_info, - ARRAY_SIZE(da850evm_spi_info)); - if (ret) - pr_warn("%s: spi info registration failed: %d\n", __func__, - ret); - - ret = da8xx_register_spi_bus(1, ARRAY_SIZE(da850evm_spi_info)); - if (ret) - pr_warn("%s: SPI 1 registration failed: %d\n", __func__, ret); - - ret = da850_register_sata(DA850EVM_SATA_REFCLKPN_RATE); - if (ret) - pr_warn("%s: SATA registration failed: %d\n", __func__, ret); - - ret = da8xx_register_rproc(); - if (ret) - pr_warn("%s: dsp/rproc registration failed: %d\n", - __func__, ret); - - regulator_has_full_constraints(); -} - -#ifdef CONFIG_SERIAL_8250_CONSOLE -static int __init da850_evm_console_init(void) -{ - if (!machine_is_davinci_da850_evm()) - return 0; - - return add_preferred_console("ttyS", 2, "115200"); -} -console_initcall(da850_evm_console_init); -#endif - -static void __init da850_evm_map_io(void) -{ - da850_init(); -} - -MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM") - .atag_offset = 0x100, - .map_io = da850_evm_map_io, - .init_irq = da850_init_irq, - .init_time = da850_init_time, - .init_machine = da850_evm_init, - .init_late = davinci_init_late, - .dma_zone_size = SZ_128M, - .reserve = da8xx_rproc_reserve_cma, -MACHINE_END diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c deleted file mode 100644 index b48ab1c3e48b..000000000000 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ /dev/null @@ -1,444 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * TI DaVinci EVM board support - * - * Author: Kevin Hilman, Deep Root Systems, LLC - * - * 2007 (c) MontaVista Software, Inc. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/err.h> -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/rawnand.h> -#include <linux/i2c.h> -#include <linux/gpio.h> -#include <linux/gpio/machine.h> -#include <linux/clk.h> -#include <linux/dm9000.h> -#include <linux/videodev2.h> -#include <media/i2c/tvp514x.h> -#include <linux/spi/spi.h> -#include <linux/spi/eeprom.h> -#include <linux/platform_data/gpio-davinci.h> -#include <linux/platform_data/i2c-davinci.h> -#include <linux/platform_data/mtd-davinci.h> -#include <linux/platform_data/mmc-davinci.h> -#include <linux/platform_data/usb-davinci.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include "serial.h" -#include "common.h" -#include "davinci.h" - -/* NOTE: this is geared for the standard config, with a socketed - * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors. If you - * swap chips, maybe with a different block size, partitioning may - * need to be changed. - */ -#define NAND_BLOCK_SIZE SZ_128K - -static struct mtd_partition davinci_nand_partitions[] = { - { - /* UBL (a few copies) plus U-Boot */ - .name = "bootloader", - .offset = 0, - .size = 15 * NAND_BLOCK_SIZE, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, { - /* U-Boot environment */ - .name = "params", - .offset = MTDPART_OFS_APPEND, - .size = 1 * NAND_BLOCK_SIZE, - .mask_flags = 0, - }, { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = SZ_4M, - .mask_flags = 0, - }, { - .name = "filesystem1", - .offset = MTDPART_OFS_APPEND, - .size = SZ_512M, - .mask_flags = 0, - }, { - .name = "filesystem2", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0, - } - /* two blocks with bad block table (and mirror) at the end */ -}; - -static struct davinci_nand_pdata davinci_nand_data = { - .core_chipsel = 0, - .mask_chipsel = BIT(14), - .parts = davinci_nand_partitions, - .nr_parts = ARRAY_SIZE(davinci_nand_partitions), - .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST, - .bbt_options = NAND_BBT_USE_FLASH, - .ecc_bits = 4, -}; - -static struct resource davinci_nand_resources[] = { - { - .start = DM355_ASYNC_EMIF_DATA_CE0_BASE, - .end = DM355_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1, - .flags = IORESOURCE_MEM, - }, { - .start = DM355_ASYNC_EMIF_CONTROL_BASE, - .end = DM355_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device davinci_nand_device = { - .name = "davinci_nand", - .id = 0, - - .num_resources = ARRAY_SIZE(davinci_nand_resources), - .resource = davinci_nand_resources, - - .dev = { - .platform_data = &davinci_nand_data, - }, -}; - -#define DM355_I2C_SDA_PIN GPIO_TO_PIN(0, 15) -#define DM355_I2C_SCL_PIN GPIO_TO_PIN(0, 14) - -static struct gpiod_lookup_table i2c_recovery_gpiod_table = { - .dev_id = "i2c_davinci.1", - .table = { - GPIO_LOOKUP("davinci_gpio", DM355_I2C_SDA_PIN, "sda", - GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), - GPIO_LOOKUP("davinci_gpio", DM355_I2C_SCL_PIN, "scl", - GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), - { } - }, -}; - -static struct davinci_i2c_platform_data i2c_pdata = { - .bus_freq = 400 /* kHz */, - .bus_delay = 0 /* usec */, - .gpio_recovery = true, -}; - -static int dm355evm_mmc_gpios = -EINVAL; - -static void dm355evm_mmcsd_gpios(unsigned gpio) -{ - gpio_request(gpio + 0, "mmc0_ro"); - gpio_request(gpio + 1, "mmc0_cd"); - gpio_request(gpio + 2, "mmc1_ro"); - gpio_request(gpio + 3, "mmc1_cd"); - - /* we "know" these are input-only so we don't - * need to call gpio_direction_input() - */ - - dm355evm_mmc_gpios = gpio; -} - -static struct i2c_board_info dm355evm_i2c_info[] = { - { I2C_BOARD_INFO("dm355evm_msp", 0x25), - .platform_data = dm355evm_mmcsd_gpios, - }, - /* { plus irq }, */ - { I2C_BOARD_INFO("tlv320aic33", 0x1b), }, -}; - -static void __init evm_init_i2c(void) -{ - gpiod_add_lookup_table(&i2c_recovery_gpiod_table); - davinci_init_i2c(&i2c_pdata); - - gpio_request(5, "dm355evm_msp"); - gpio_direction_input(5); - dm355evm_i2c_info[0].irq = gpio_to_irq(5); - - i2c_register_board_info(1, dm355evm_i2c_info, - ARRAY_SIZE(dm355evm_i2c_info)); -} - -static struct resource dm355evm_dm9000_rsrc[] = { - { - /* addr */ - .start = 0x04014000, - .end = 0x04014001, - .flags = IORESOURCE_MEM, - }, { - /* data */ - .start = 0x04014002, - .end = 0x04014003, - .flags = IORESOURCE_MEM, - }, { - .flags = IORESOURCE_IRQ - | IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */, - }, -}; - -static struct dm9000_plat_data dm335evm_dm9000_platdata; - -static struct platform_device dm355evm_dm9000 = { - .name = "dm9000", - .id = -1, - .resource = dm355evm_dm9000_rsrc, - .num_resources = ARRAY_SIZE(dm355evm_dm9000_rsrc), - .dev = { - .platform_data = &dm335evm_dm9000_platdata, - }, -}; - -static struct tvp514x_platform_data tvp5146_pdata = { - .clk_polarity = 0, - .hs_polarity = 1, - .vs_polarity = 1 -}; - -#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL) -/* Inputs available at the TVP5146 */ -static struct v4l2_input tvp5146_inputs[] = { - { - .index = 0, - .name = "Composite", - .type = V4L2_INPUT_TYPE_CAMERA, - .std = TVP514X_STD_ALL, - }, - { - .index = 1, - .name = "S-Video", - .type = V4L2_INPUT_TYPE_CAMERA, - .std = TVP514X_STD_ALL, - }, -}; - -/* - * this is the route info for connecting each input to decoder - * ouput that goes to vpfe. There is a one to one correspondence - * with tvp5146_inputs - */ -static struct vpfe_route tvp5146_routes[] = { - { - .input = INPUT_CVBS_VI2B, - .output = OUTPUT_10BIT_422_EMBEDDED_SYNC, - }, - { - .input = INPUT_SVIDEO_VI2C_VI1C, - .output = OUTPUT_10BIT_422_EMBEDDED_SYNC, - }, -}; - -static struct vpfe_subdev_info vpfe_sub_devs[] = { - { - .name = "tvp5146", - .grp_id = 0, - .num_inputs = ARRAY_SIZE(tvp5146_inputs), - .inputs = tvp5146_inputs, - .routes = tvp5146_routes, - .can_route = 1, - .ccdc_if_params = { - .if_type = VPFE_BT656, - .hdpol = VPFE_PINPOL_POSITIVE, - .vdpol = VPFE_PINPOL_POSITIVE, - }, - .board_info = { - I2C_BOARD_INFO("tvp5146", 0x5d), - .platform_data = &tvp5146_pdata, - }, - } -}; - -static struct vpfe_config vpfe_cfg = { - .num_subdevs = ARRAY_SIZE(vpfe_sub_devs), - .i2c_adapter_id = 1, - .sub_devs = vpfe_sub_devs, - .card_name = "DM355 EVM", - .ccdc = "DM355 CCDC", -}; - -/* venc standards timings */ -static struct vpbe_enc_mode_info dm355evm_enc_preset_timing[] = { - { - .name = "ntsc", - .timings_type = VPBE_ENC_STD, - .std_id = V4L2_STD_NTSC, - .interlaced = 1, - .xres = 720, - .yres = 480, - .aspect = {11, 10}, - .fps = {30000, 1001}, - .left_margin = 0x79, - .upper_margin = 0x10, - }, - { - .name = "pal", - .timings_type = VPBE_ENC_STD, - .std_id = V4L2_STD_PAL, - .interlaced = 1, - .xres = 720, - .yres = 576, - .aspect = {54, 59}, - .fps = {25, 1}, - .left_margin = 0x7E, - .upper_margin = 0x16 - }, -}; - -#define VENC_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL) - -/* - * The outputs available from VPBE + ecnoders. Keep the - * the order same as that of encoders. First those from venc followed by that - * from encoders. Index in the output refers to index on a particular encoder. - * Driver uses this index to pass it to encoder when it supports more than - * one output. Application uses index of the array to set an output. - */ -static struct vpbe_output dm355evm_vpbe_outputs[] = { - { - .output = { - .index = 0, - .name = "Composite", - .type = V4L2_OUTPUT_TYPE_ANALOG, - .std = VENC_STD_ALL, - .capabilities = V4L2_OUT_CAP_STD, - }, - .subdev_name = DM355_VPBE_VENC_SUBDEV_NAME, - .default_mode = "ntsc", - .num_modes = ARRAY_SIZE(dm355evm_enc_preset_timing), - .modes = dm355evm_enc_preset_timing, - .if_params = MEDIA_BUS_FMT_FIXED, - }, -}; - -static struct vpbe_config dm355evm_display_cfg = { - .module_name = "dm355-vpbe-display", - .i2c_adapter_id = 1, - .osd = { - .module_name = DM355_VPBE_OSD_SUBDEV_NAME, - }, - .venc = { - .module_name = DM355_VPBE_VENC_SUBDEV_NAME, - }, - .num_outputs = ARRAY_SIZE(dm355evm_vpbe_outputs), - .outputs = dm355evm_vpbe_outputs, -}; - -static struct platform_device *davinci_evm_devices[] __initdata = { - &dm355evm_dm9000, - &davinci_nand_device, -}; - -static void __init dm355_evm_map_io(void) -{ - dm355_init(); -} - -static int dm355evm_mmc_get_cd(int module) -{ - if (!gpio_is_valid(dm355evm_mmc_gpios)) - return -ENXIO; - /* low == card present */ - return !gpio_get_value_cansleep(dm355evm_mmc_gpios + 2 * module + 1); -} - -static int dm355evm_mmc_get_ro(int module) -{ - if (!gpio_is_valid(dm355evm_mmc_gpios)) - return -ENXIO; - /* high == card's write protect switch active */ - return gpio_get_value_cansleep(dm355evm_mmc_gpios + 2 * module + 0); -} - -static struct davinci_mmc_config dm355evm_mmc_config = { - .get_cd = dm355evm_mmc_get_cd, - .get_ro = dm355evm_mmc_get_ro, - .wires = 4, - .max_freq = 50000000, - .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, -}; - -/* Don't connect anything to J10 unless you're only using USB host - * mode *and* have to do so with some kind of gender-bender. If - * you have proper Mini-B or Mini-A cables (or Mini-A adapters) - * the ID pin won't need any help. - */ -#define USB_ID_VALUE 1 /* ID pulled low */ - -static struct spi_eeprom at25640a = { - .byte_len = SZ_64K / 8, - .name = "at25640a", - .page_size = 32, - .flags = EE_ADDR2, -}; - -static const struct spi_board_info dm355_evm_spi_info[] __initconst = { - { - .modalias = "at25", - .platform_data = &at25640a, - .max_speed_hz = 10 * 1000 * 1000, /* at 3v3 */ - .bus_num = 0, - .chip_select = 0, - .mode = SPI_MODE_0, - }, -}; - -static __init void dm355_evm_init(void) -{ - struct clk *aemif; - int ret; - - dm355_register_clocks(); - - ret = dm355_gpio_register(); - if (ret) - pr_warn("%s: GPIO init failed: %d\n", __func__, ret); - - gpio_request(1, "dm9000"); - gpio_direction_input(1); - dm355evm_dm9000_rsrc[2].start = gpio_to_irq(1); - - aemif = clk_get(&dm355evm_dm9000.dev, "aemif"); - if (!WARN(IS_ERR(aemif), "unable to get AEMIF clock\n")) - clk_prepare_enable(aemif); - - platform_add_devices(davinci_evm_devices, - ARRAY_SIZE(davinci_evm_devices)); - evm_init_i2c(); - davinci_serial_init(dm355_serial_device); - - /* NOTE: NAND flash timings set by the UBL are slower than - * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204 - * but could be 0x0400008c for about 25% faster page reads. - */ - - gpio_request(2, "usb_id_toggle"); - gpio_direction_output(2, USB_ID_VALUE); - /* irlml6401 switches over 1A in under 8 msec */ - davinci_setup_usb(1000, 8); - - davinci_setup_mmc(0, &dm355evm_mmc_config); - davinci_setup_mmc(1, &dm355evm_mmc_config); - - dm355_init_video(&vpfe_cfg, &dm355evm_display_cfg); - - dm355_init_spi0(BIT(0), dm355_evm_spi_info, - ARRAY_SIZE(dm355_evm_spi_info)); - - /* DM335 EVM uses ASP1; line-out is a stereo mini-jack */ - dm355_init_asp1(ASP1_TX_EVT_EN | ASP1_RX_EVT_EN); -} - -MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM") - .atag_offset = 0x100, - .map_io = dm355_evm_map_io, - .init_irq = dm355_init_irq, - .init_time = dm355_init_time, - .init_machine = dm355_evm_init, - .init_late = davinci_init_late, - .dma_zone_size = SZ_128M, -MACHINE_END diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c deleted file mode 100644 index 32b9d607d025..000000000000 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ /dev/null @@ -1,278 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * DM355 leopard board support - * - * Based on board-dm355-evm.c - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/err.h> -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/rawnand.h> -#include <linux/i2c.h> -#include <linux/gpio.h> -#include <linux/clk.h> -#include <linux/spi/spi.h> -#include <linux/spi/eeprom.h> -#include <linux/platform_data/i2c-davinci.h> -#include <linux/platform_data/mmc-davinci.h> -#include <linux/platform_data/mtd-davinci.h> -#include <linux/platform_data/usb-davinci.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include "common.h" -#include "serial.h" -#include "davinci.h" - -/* NOTE: this is geared for the standard config, with a socketed - * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors. If you - * swap chips, maybe with a different block size, partitioning may - * need to be changed. - */ -#define NAND_BLOCK_SIZE SZ_128K - -static struct mtd_partition davinci_nand_partitions[] = { - { - /* UBL (a few copies) plus U-Boot */ - .name = "bootloader", - .offset = 0, - .size = 15 * NAND_BLOCK_SIZE, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, { - /* U-Boot environment */ - .name = "params", - .offset = MTDPART_OFS_APPEND, - .size = 1 * NAND_BLOCK_SIZE, - .mask_flags = 0, - }, { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = SZ_4M, - .mask_flags = 0, - }, { - .name = "filesystem1", - .offset = MTDPART_OFS_APPEND, - .size = SZ_512M, - .mask_flags = 0, - }, { - .name = "filesystem2", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0, - } - /* two blocks with bad block table (and mirror) at the end */ -}; - -static struct davinci_nand_pdata davinci_nand_data = { - .core_chipsel = 0, - .mask_chipsel = BIT(14), - .parts = davinci_nand_partitions, - .nr_parts = ARRAY_SIZE(davinci_nand_partitions), - .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST, - .ecc_placement = NAND_ECC_PLACEMENT_INTERLEAVED, - .ecc_bits = 4, - .bbt_options = NAND_BBT_USE_FLASH, -}; - -static struct resource davinci_nand_resources[] = { - { - .start = DM355_ASYNC_EMIF_DATA_CE0_BASE, - .end = DM355_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1, - .flags = IORESOURCE_MEM, - }, { - .start = DM355_ASYNC_EMIF_CONTROL_BASE, - .end = DM355_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device davinci_nand_device = { - .name = "davinci_nand", - .id = 0, - - .num_resources = ARRAY_SIZE(davinci_nand_resources), - .resource = davinci_nand_resources, - - .dev = { - .platform_data = &davinci_nand_data, - }, -}; - -static struct davinci_i2c_platform_data i2c_pdata = { - .bus_freq = 400 /* kHz */, - .bus_delay = 0 /* usec */, -}; - -static int leopard_mmc_gpio = -EINVAL; - -static void dm355leopard_mmcsd_gpios(unsigned gpio) -{ - gpio_request(gpio + 0, "mmc0_ro"); - gpio_request(gpio + 1, "mmc0_cd"); - gpio_request(gpio + 2, "mmc1_ro"); - gpio_request(gpio + 3, "mmc1_cd"); - - /* we "know" these are input-only so we don't - * need to call gpio_direction_input() - */ - - leopard_mmc_gpio = gpio; -} - -static struct i2c_board_info dm355leopard_i2c_info[] = { - { I2C_BOARD_INFO("dm355leopard_msp", 0x25), - .platform_data = dm355leopard_mmcsd_gpios, - /* plus irq */ }, - /* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */ - /* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */ -}; - -static void __init leopard_init_i2c(void) -{ - davinci_init_i2c(&i2c_pdata); - - gpio_request(5, "dm355leopard_msp"); - gpio_direction_input(5); - dm355leopard_i2c_info[0].irq = gpio_to_irq(5); - - i2c_register_board_info(1, dm355leopard_i2c_info, - ARRAY_SIZE(dm355leopard_i2c_info)); -} - -static struct resource dm355leopard_dm9000_rsrc[] = { - { - /* addr */ - .start = 0x04000000, - .end = 0x04000001, - .flags = IORESOURCE_MEM, - }, { - /* data */ - .start = 0x04000016, - .end = 0x04000017, - .flags = IORESOURCE_MEM, - }, { - .flags = IORESOURCE_IRQ - | IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */, - }, -}; - -static struct platform_device dm355leopard_dm9000 = { - .name = "dm9000", - .id = -1, - .resource = dm355leopard_dm9000_rsrc, - .num_resources = ARRAY_SIZE(dm355leopard_dm9000_rsrc), -}; - -static struct platform_device *davinci_leopard_devices[] __initdata = { - &dm355leopard_dm9000, - &davinci_nand_device, -}; - -static void __init dm355_leopard_map_io(void) -{ - dm355_init(); -} - -static int dm355leopard_mmc_get_cd(int module) -{ - if (!gpio_is_valid(leopard_mmc_gpio)) - return -ENXIO; - /* low == card present */ - return !gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 1); -} - -static int dm355leopard_mmc_get_ro(int module) -{ - if (!gpio_is_valid(leopard_mmc_gpio)) - return -ENXIO; - /* high == card's write protect switch active */ - return gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 0); -} - -static struct davinci_mmc_config dm355leopard_mmc_config = { - .get_cd = dm355leopard_mmc_get_cd, - .get_ro = dm355leopard_mmc_get_ro, - .wires = 4, - .max_freq = 50000000, - .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, -}; - -/* Don't connect anything to J10 unless you're only using USB host - * mode *and* have to do so with some kind of gender-bender. If - * you have proper Mini-B or Mini-A cables (or Mini-A adapters) - * the ID pin won't need any help. - */ -#define USB_ID_VALUE 1 /* ID pulled low */ - -static struct spi_eeprom at25640a = { - .byte_len = SZ_64K / 8, - .name = "at25640a", - .page_size = 32, - .flags = EE_ADDR2, -}; - -static const struct spi_board_info dm355_leopard_spi_info[] __initconst = { - { - .modalias = "at25", - .platform_data = &at25640a, - .max_speed_hz = 10 * 1000 * 1000, /* at 3v3 */ - .bus_num = 0, - .chip_select = 0, - .mode = SPI_MODE_0, - }, -}; - -static __init void dm355_leopard_init(void) -{ - struct clk *aemif; - int ret; - - dm355_register_clocks(); - - ret = dm355_gpio_register(); - if (ret) - pr_warn("%s: GPIO init failed: %d\n", __func__, ret); - - gpio_request(9, "dm9000"); - gpio_direction_input(9); - dm355leopard_dm9000_rsrc[2].start = gpio_to_irq(9); - - aemif = clk_get(&dm355leopard_dm9000.dev, "aemif"); - if (!WARN(IS_ERR(aemif), "unable to get AEMIF clock\n")) - clk_prepare_enable(aemif); - - platform_add_devices(davinci_leopard_devices, - ARRAY_SIZE(davinci_leopard_devices)); - leopard_init_i2c(); - davinci_serial_init(dm355_serial_device); - - /* NOTE: NAND flash timings set by the UBL are slower than - * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204 - * but could be 0x0400008c for about 25% faster page reads. - */ - - gpio_request(2, "usb_id_toggle"); - gpio_direction_output(2, USB_ID_VALUE); - /* irlml6401 switches over 1A in under 8 msec */ - davinci_setup_usb(1000, 8); - - davinci_setup_mmc(0, &dm355leopard_mmc_config); - davinci_setup_mmc(1, &dm355leopard_mmc_config); - - dm355_init_spi0(BIT(0), dm355_leopard_spi_info, - ARRAY_SIZE(dm355_leopard_spi_info)); -} - -MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard") - .atag_offset = 0x100, - .map_io = dm355_leopard_map_io, - .init_irq = dm355_init_irq, - .init_time = dm355_init_time, - .init_machine = dm355_leopard_init, - .init_late = davinci_init_late, - .dma_zone_size = SZ_128M, -MACHINE_END diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c deleted file mode 100644 index d8c6c360818b..000000000000 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ /dev/null @@ -1,855 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * TI DaVinci DM365 EVM board support - * - * Copyright (C) 2009 Texas Instruments Incorporated - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/err.h> -#include <linux/i2c.h> -#include <linux/io.h> -#include <linux/clk.h> -#include <linux/property.h> -#include <linux/leds.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/slab.h> -#include <linux/mtd/rawnand.h> -#include <linux/nvmem-provider.h> -#include <linux/input.h> -#include <linux/spi/spi.h> -#include <linux/spi/eeprom.h> -#include <linux/v4l2-dv-timings.h> -#include <linux/platform_data/ti-aemif.h> -#include <linux/regulator/fixed.h> -#include <linux/regulator/machine.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include <linux/platform_data/i2c-davinci.h> -#include <linux/platform_data/mmc-davinci.h> -#include <linux/platform_data/mtd-davinci.h> -#include <linux/platform_data/keyscan-davinci.h> - -#include <media/i2c/ths7303.h> -#include <media/i2c/tvp514x.h> - -#include "mux.h" -#include "common.h" -#include "serial.h" -#include "davinci.h" - -static inline int have_imager(void) -{ - /* REVISIT when it's supported, trigger via Kconfig */ - return 0; -} - -static inline int have_tvp7002(void) -{ - /* REVISIT when it's supported, trigger via Kconfig */ - return 0; -} - -#define DM365_EVM_PHY_ID "davinci_mdio-0:01" -/* - * A MAX-II CPLD is used for various board control functions. - */ -#define CPLD_OFFSET(a13a8,a2a1) (((a13a8) << 10) + ((a2a1) << 3)) - -#define CPLD_VERSION CPLD_OFFSET(0,0) /* r/o */ -#define CPLD_TEST CPLD_OFFSET(0,1) -#define CPLD_LEDS CPLD_OFFSET(0,2) -#define CPLD_MUX CPLD_OFFSET(0,3) -#define CPLD_SWITCH CPLD_OFFSET(1,0) /* r/o */ -#define CPLD_POWER CPLD_OFFSET(1,1) -#define CPLD_VIDEO CPLD_OFFSET(1,2) -#define CPLD_CARDSTAT CPLD_OFFSET(1,3) /* r/o */ - -#define CPLD_DILC_OUT CPLD_OFFSET(2,0) -#define CPLD_DILC_IN CPLD_OFFSET(2,1) /* r/o */ - -#define CPLD_IMG_DIR0 CPLD_OFFSET(2,2) -#define CPLD_IMG_MUX0 CPLD_OFFSET(2,3) -#define CPLD_IMG_MUX1 CPLD_OFFSET(3,0) -#define CPLD_IMG_DIR1 CPLD_OFFSET(3,1) -#define CPLD_IMG_MUX2 CPLD_OFFSET(3,2) -#define CPLD_IMG_MUX3 CPLD_OFFSET(3,3) -#define CPLD_IMG_DIR2 CPLD_OFFSET(4,0) -#define CPLD_IMG_MUX4 CPLD_OFFSET(4,1) -#define CPLD_IMG_MUX5 CPLD_OFFSET(4,2) - -#define CPLD_RESETS CPLD_OFFSET(4,3) - -#define CPLD_CCD_DIR1 CPLD_OFFSET(0x3e,0) -#define CPLD_CCD_IO1 CPLD_OFFSET(0x3e,1) -#define CPLD_CCD_DIR2 CPLD_OFFSET(0x3e,2) -#define CPLD_CCD_IO2 CPLD_OFFSET(0x3e,3) -#define CPLD_CCD_DIR3 CPLD_OFFSET(0x3f,0) -#define CPLD_CCD_IO3 CPLD_OFFSET(0x3f,1) - -static void __iomem *cpld; - - -/* NOTE: this is geared for the standard config, with a socketed - * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors. If you - * swap chips with a different block size, partitioning will - * need to be changed. This NAND chip MT29F16G08FAA is the default - * NAND shipped with the Spectrum Digital DM365 EVM - */ -#define NAND_BLOCK_SIZE SZ_128K - -static struct mtd_partition davinci_nand_partitions[] = { - { - /* UBL (a few copies) plus U-Boot */ - .name = "bootloader", - .offset = 0, - .size = 30 * NAND_BLOCK_SIZE, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, { - /* U-Boot environment */ - .name = "params", - .offset = MTDPART_OFS_APPEND, - .size = 2 * NAND_BLOCK_SIZE, - .mask_flags = 0, - }, { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = SZ_4M, - .mask_flags = 0, - }, { - .name = "filesystem1", - .offset = MTDPART_OFS_APPEND, - .size = SZ_512M, - .mask_flags = 0, - }, { - .name = "filesystem2", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0, - } - /* two blocks with bad block table (and mirror) at the end */ -}; - -static struct davinci_nand_pdata davinci_nand_data = { - .core_chipsel = 0, - .mask_chipsel = BIT(14), - .parts = davinci_nand_partitions, - .nr_parts = ARRAY_SIZE(davinci_nand_partitions), - .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST, - .bbt_options = NAND_BBT_USE_FLASH, - .ecc_bits = 4, -}; - -static struct resource davinci_nand_resources[] = { - { - .start = DM365_ASYNC_EMIF_DATA_CE0_BASE, - .end = DM365_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1, - .flags = IORESOURCE_MEM, - }, { - .start = DM365_ASYNC_EMIF_CONTROL_BASE, - .end = DM365_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device davinci_aemif_devices[] = { - { - .name = "davinci_nand", - .id = 0, - .num_resources = ARRAY_SIZE(davinci_nand_resources), - .resource = davinci_nand_resources, - .dev = { - .platform_data = &davinci_nand_data, - }, - } -}; - -static struct resource davinci_aemif_resources[] = { - { - .start = DM365_ASYNC_EMIF_CONTROL_BASE, - .end = DM365_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct aemif_abus_data da850_evm_aemif_abus_data[] = { - { - .cs = 1, - }, -}; - -static struct aemif_platform_data davinci_aemif_pdata = { - .abus_data = da850_evm_aemif_abus_data, - .num_abus_data = ARRAY_SIZE(da850_evm_aemif_abus_data), - .sub_devices = davinci_aemif_devices, - .num_sub_devices = ARRAY_SIZE(davinci_aemif_devices), -}; - -static struct platform_device davinci_aemif_device = { - .name = "ti-aemif", - .id = -1, - .dev = { - .platform_data = &davinci_aemif_pdata, - }, - .resource = davinci_aemif_resources, - .num_resources = ARRAY_SIZE(davinci_aemif_resources), -}; - -static struct nvmem_cell_info davinci_nvmem_cells[] = { - { - .name = "macaddr", - .offset = 0x7f00, - .bytes = ETH_ALEN, - } -}; - -static struct nvmem_cell_table davinci_nvmem_cell_table = { - .nvmem_name = "1-00500", - .cells = davinci_nvmem_cells, - .ncells = ARRAY_SIZE(davinci_nvmem_cells), -}; - -static struct nvmem_cell_lookup davinci_nvmem_cell_lookup = { - .nvmem_name = "1-00500", - .cell_name = "macaddr", - .dev_id = "davinci_emac.1", - .con_id = "mac-address", -}; - -static const struct property_entry eeprom_properties[] = { - PROPERTY_ENTRY_U32("pagesize", 64), - { } -}; - -static const struct software_node eeprom_node = { - .properties = eeprom_properties, -}; - -static struct i2c_board_info i2c_info[] = { - { - I2C_BOARD_INFO("24c256", 0x50), - .swnode = &eeprom_node, - }, - { - I2C_BOARD_INFO("tlv320aic3x", 0x18), - }, -}; - -static struct davinci_i2c_platform_data i2c_pdata = { - .bus_freq = 400 /* kHz */, - .bus_delay = 0 /* usec */, -}; - -/* Fixed regulator support */ -static struct regulator_consumer_supply fixed_supplies_3_3v[] = { - /* Baseboard 3.3V: 5V -> TPS767D301 -> 3.3V */ - REGULATOR_SUPPLY("AVDD", "1-0018"), - REGULATOR_SUPPLY("DRVDD", "1-0018"), - REGULATOR_SUPPLY("IOVDD", "1-0018"), -}; - -static struct regulator_consumer_supply fixed_supplies_1_8v[] = { - /* Baseboard 1.8V: 5V -> TPS767D301 -> 1.8V */ - REGULATOR_SUPPLY("DVDD", "1-0018"), -}; - -static int dm365evm_keyscan_enable(struct device *dev) -{ - return davinci_cfg_reg(DM365_KEYSCAN); -} - -static unsigned short dm365evm_keymap[] = { - KEY_KP2, - KEY_LEFT, - KEY_EXIT, - KEY_DOWN, - KEY_ENTER, - KEY_UP, - KEY_KP1, - KEY_RIGHT, - KEY_MENU, - KEY_RECORD, - KEY_REWIND, - KEY_KPMINUS, - KEY_STOP, - KEY_FASTFORWARD, - KEY_KPPLUS, - KEY_PLAYPAUSE, - 0 -}; - -static struct davinci_ks_platform_data dm365evm_ks_data = { - .device_enable = dm365evm_keyscan_enable, - .keymap = dm365evm_keymap, - .keymapsize = ARRAY_SIZE(dm365evm_keymap), - .rep = 1, - /* Scan period = strobe + interval */ - .strobe = 0x5, - .interval = 0x2, - .matrix_type = DAVINCI_KEYSCAN_MATRIX_4X4, -}; - -static int cpld_mmc_get_cd(int module) -{ - if (!cpld) - return -ENXIO; - - /* low == card present */ - return !(__raw_readb(cpld + CPLD_CARDSTAT) & BIT(module ? 4 : 0)); -} - -static int cpld_mmc_get_ro(int module) -{ - if (!cpld) - return -ENXIO; - - /* high == card's write protect switch active */ - return !!(__raw_readb(cpld + CPLD_CARDSTAT) & BIT(module ? 5 : 1)); -} - -static struct davinci_mmc_config dm365evm_mmc_config = { - .get_cd = cpld_mmc_get_cd, - .get_ro = cpld_mmc_get_ro, - .wires = 4, - .max_freq = 50000000, - .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, -}; - -static void dm365evm_emac_configure(void) -{ - /* - * EMAC pins are multiplexed with GPIO and UART - * Further details are available at the DM365 ARM - * Subsystem Users Guide(sprufg5.pdf) pages 125 - 127 - */ - davinci_cfg_reg(DM365_EMAC_TX_EN); - davinci_cfg_reg(DM365_EMAC_TX_CLK); - davinci_cfg_reg(DM365_EMAC_COL); - davinci_cfg_reg(DM365_EMAC_TXD3); - davinci_cfg_reg(DM365_EMAC_TXD2); - davinci_cfg_reg(DM365_EMAC_TXD1); - davinci_cfg_reg(DM365_EMAC_TXD0); - davinci_cfg_reg(DM365_EMAC_RXD3); - davinci_cfg_reg(DM365_EMAC_RXD2); - davinci_cfg_reg(DM365_EMAC_RXD1); - davinci_cfg_reg(DM365_EMAC_RXD0); - davinci_cfg_reg(DM365_EMAC_RX_CLK); - davinci_cfg_reg(DM365_EMAC_RX_DV); - davinci_cfg_reg(DM365_EMAC_RX_ER); - davinci_cfg_reg(DM365_EMAC_CRS); - davinci_cfg_reg(DM365_EMAC_MDIO); - davinci_cfg_reg(DM365_EMAC_MDCLK); - - /* - * EMAC interrupts are multiplexed with GPIO interrupts - * Details are available at the DM365 ARM - * Subsystem Users Guide(sprufg5.pdf) pages 133 - 134 - */ - davinci_cfg_reg(DM365_INT_EMAC_RXTHRESH); - davinci_cfg_reg(DM365_INT_EMAC_RXPULSE); - davinci_cfg_reg(DM365_INT_EMAC_TXPULSE); - davinci_cfg_reg(DM365_INT_EMAC_MISCPULSE); -} - -static void dm365evm_mmc_configure(void) -{ - /* - * MMC/SD pins are multiplexed with GPIO and EMIF - * Further details are available at the DM365 ARM - * Subsystem Users Guide(sprufg5.pdf) pages 118, 128 - 131 - */ - davinci_cfg_reg(DM365_SD1_CLK); - davinci_cfg_reg(DM365_SD1_CMD); - davinci_cfg_reg(DM365_SD1_DATA3); - davinci_cfg_reg(DM365_SD1_DATA2); - davinci_cfg_reg(DM365_SD1_DATA1); - davinci_cfg_reg(DM365_SD1_DATA0); -} - -static struct tvp514x_platform_data tvp5146_pdata = { - .clk_polarity = 0, - .hs_polarity = 1, - .vs_polarity = 1 -}; - -#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL) -/* Inputs available at the TVP5146 */ -static struct v4l2_input tvp5146_inputs[] = { - { - .index = 0, - .name = "Composite", - .type = V4L2_INPUT_TYPE_CAMERA, - .std = TVP514X_STD_ALL, - }, - { - .index = 1, - .name = "S-Video", - .type = V4L2_INPUT_TYPE_CAMERA, - .std = TVP514X_STD_ALL, - }, -}; - -/* - * this is the route info for connecting each input to decoder - * ouput that goes to vpfe. There is a one to one correspondence - * with tvp5146_inputs - */ -static struct vpfe_route tvp5146_routes[] = { - { - .input = INPUT_CVBS_VI2B, - .output = OUTPUT_10BIT_422_EMBEDDED_SYNC, - }, -{ - .input = INPUT_SVIDEO_VI2C_VI1C, - .output = OUTPUT_10BIT_422_EMBEDDED_SYNC, - }, -}; - -static struct vpfe_subdev_info vpfe_sub_devs[] = { - { - .name = "tvp5146", - .grp_id = 0, - .num_inputs = ARRAY_SIZE(tvp5146_inputs), - .inputs = tvp5146_inputs, - .routes = tvp5146_routes, - .can_route = 1, - .ccdc_if_params = { - .if_type = VPFE_BT656, - .hdpol = VPFE_PINPOL_POSITIVE, - .vdpol = VPFE_PINPOL_POSITIVE, - }, - .board_info = { - I2C_BOARD_INFO("tvp5146", 0x5d), - .platform_data = &tvp5146_pdata, - }, - }, -}; - -static struct vpfe_config vpfe_cfg = { - .num_subdevs = ARRAY_SIZE(vpfe_sub_devs), - .sub_devs = vpfe_sub_devs, - .i2c_adapter_id = 1, - .card_name = "DM365 EVM", - .ccdc = "ISIF", -}; - -/* venc standards timings */ -static struct vpbe_enc_mode_info dm365evm_enc_std_timing[] = { - { - .name = "ntsc", - .timings_type = VPBE_ENC_STD, - .std_id = V4L2_STD_NTSC, - .interlaced = 1, - .xres = 720, - .yres = 480, - .aspect = {11, 10}, - .fps = {30000, 1001}, - .left_margin = 0x79, - .upper_margin = 0x10, - }, - { - .name = "pal", - .timings_type = VPBE_ENC_STD, - .std_id = V4L2_STD_PAL, - .interlaced = 1, - .xres = 720, - .yres = 576, - .aspect = {54, 59}, - .fps = {25, 1}, - .left_margin = 0x7E, - .upper_margin = 0x16, - }, -}; - -/* venc dv timings */ -static struct vpbe_enc_mode_info dm365evm_enc_preset_timing[] = { - { - .name = "480p59_94", - .timings_type = VPBE_ENC_DV_TIMINGS, - .dv_timings = V4L2_DV_BT_CEA_720X480P59_94, - .interlaced = 0, - .xres = 720, - .yres = 480, - .aspect = {1, 1}, - .fps = {5994, 100}, - .left_margin = 0x8F, - .upper_margin = 0x2D, - }, - { - .name = "576p50", - .timings_type = VPBE_ENC_DV_TIMINGS, - .dv_timings = V4L2_DV_BT_CEA_720X576P50, - .interlaced = 0, - .xres = 720, - .yres = 576, - .aspect = {1, 1}, - .fps = {50, 1}, - .left_margin = 0x8C, - .upper_margin = 0x36, - }, - { - .name = "720p60", - .timings_type = VPBE_ENC_DV_TIMINGS, - .dv_timings = V4L2_DV_BT_CEA_1280X720P60, - .interlaced = 0, - .xres = 1280, - .yres = 720, - .aspect = {1, 1}, - .fps = {60, 1}, - .left_margin = 0x117, - .right_margin = 70, - .upper_margin = 38, - .lower_margin = 3, - .hsync_len = 80, - .vsync_len = 5, - }, - { - .name = "1080i60", - .timings_type = VPBE_ENC_DV_TIMINGS, - .dv_timings = V4L2_DV_BT_CEA_1920X1080I60, - .interlaced = 1, - .xres = 1920, - .yres = 1080, - .aspect = {1, 1}, - .fps = {30, 1}, - .left_margin = 0xc9, - .right_margin = 80, - .upper_margin = 30, - .lower_margin = 3, - .hsync_len = 88, - .vsync_len = 5, - }, -}; - -#define VENC_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL) - -/* - * The outputs available from VPBE + ecnoders. Keep the - * the order same as that of encoders. First those from venc followed by that - * from encoders. Index in the output refers to index on a particular - * encoder.Driver uses this index to pass it to encoder when it supports more - * than one output. Application uses index of the array to set an output. - */ -static struct vpbe_output dm365evm_vpbe_outputs[] = { - { - .output = { - .index = 0, - .name = "Composite", - .type = V4L2_OUTPUT_TYPE_ANALOG, - .std = VENC_STD_ALL, - .capabilities = V4L2_OUT_CAP_STD, - }, - .subdev_name = DM365_VPBE_VENC_SUBDEV_NAME, - .default_mode = "ntsc", - .num_modes = ARRAY_SIZE(dm365evm_enc_std_timing), - .modes = dm365evm_enc_std_timing, - .if_params = MEDIA_BUS_FMT_FIXED, - }, - { - .output = { - .index = 1, - .name = "Component", - .type = V4L2_OUTPUT_TYPE_ANALOG, - .capabilities = V4L2_OUT_CAP_DV_TIMINGS, - }, - .subdev_name = DM365_VPBE_VENC_SUBDEV_NAME, - .default_mode = "480p59_94", - .num_modes = ARRAY_SIZE(dm365evm_enc_preset_timing), - .modes = dm365evm_enc_preset_timing, - .if_params = MEDIA_BUS_FMT_FIXED, - }, -}; - -/* - * Amplifiers on the board - */ -static struct ths7303_platform_data ths7303_pdata = { - .ch_1 = 3, - .ch_2 = 3, - .ch_3 = 3, -}; - -static struct amp_config_info vpbe_amp = { - .module_name = "ths7303", - .is_i2c = 1, - .board_info = { - I2C_BOARD_INFO("ths7303", 0x2c), - .platform_data = &ths7303_pdata, - } -}; - -static struct vpbe_config dm365evm_display_cfg = { - .module_name = "dm365-vpbe-display", - .i2c_adapter_id = 1, - .amp = &vpbe_amp, - .osd = { - .module_name = DM365_VPBE_OSD_SUBDEV_NAME, - }, - .venc = { - .module_name = DM365_VPBE_VENC_SUBDEV_NAME, - }, - .num_outputs = ARRAY_SIZE(dm365evm_vpbe_outputs), - .outputs = dm365evm_vpbe_outputs, -}; - -static void __init evm_init_i2c(void) -{ - davinci_init_i2c(&i2c_pdata); - i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); -} - -static inline int have_leds(void) -{ -#ifdef CONFIG_LEDS_CLASS - return 1; -#else - return 0; -#endif -} - -struct cpld_led { - struct led_classdev cdev; - u8 mask; -}; - -static const struct { - const char *name; - const char *trigger; -} cpld_leds[] = { - { "dm365evm::ds2", }, - { "dm365evm::ds3", }, - { "dm365evm::ds4", }, - { "dm365evm::ds5", }, - { "dm365evm::ds6", "nand-disk", }, - { "dm365evm::ds7", "mmc1", }, - { "dm365evm::ds8", "mmc0", }, - { "dm365evm::ds9", "heartbeat", }, -}; - -static void cpld_led_set(struct led_classdev *cdev, enum led_brightness b) -{ - struct cpld_led *led = container_of(cdev, struct cpld_led, cdev); - u8 reg = __raw_readb(cpld + CPLD_LEDS); - - if (b != LED_OFF) - reg &= ~led->mask; - else - reg |= led->mask; - __raw_writeb(reg, cpld + CPLD_LEDS); -} - -static enum led_brightness cpld_led_get(struct led_classdev *cdev) -{ - struct cpld_led *led = container_of(cdev, struct cpld_led, cdev); - u8 reg = __raw_readb(cpld + CPLD_LEDS); - - return (reg & led->mask) ? LED_OFF : LED_FULL; -} - -static int __init cpld_leds_init(void) -{ - int i; - - if (!have_leds() || !cpld) - return 0; - - /* setup LEDs */ - __raw_writeb(0xff, cpld + CPLD_LEDS); - for (i = 0; i < ARRAY_SIZE(cpld_leds); i++) { - struct cpld_led *led; - - led = kzalloc(sizeof(*led), GFP_KERNEL); - if (!led) - break; - - led->cdev.name = cpld_leds[i].name; - led->cdev.brightness_set = cpld_led_set; - led->cdev.brightness_get = cpld_led_get; - led->cdev.default_trigger = cpld_leds[i].trigger; - led->mask = BIT(i); - - if (led_classdev_register(NULL, &led->cdev) < 0) { - kfree(led); - break; - } - } - - return 0; -} -/* run after subsys_initcall() for LEDs */ -fs_initcall(cpld_leds_init); - - -static void __init evm_init_cpld(void) -{ - u8 mux, resets; - const char *label; - struct clk *aemif_clk; - int rc; - - /* Make sure we can configure the CPLD through CS1. Then - * leave it on for later access to MMC and LED registers. - */ - aemif_clk = clk_get(NULL, "aemif"); - if (IS_ERR(aemif_clk)) - return; - clk_prepare_enable(aemif_clk); - - if (request_mem_region(DM365_ASYNC_EMIF_DATA_CE1_BASE, SECTION_SIZE, - "cpld") == NULL) - goto fail; - cpld = ioremap(DM365_ASYNC_EMIF_DATA_CE1_BASE, SECTION_SIZE); - if (!cpld) { - release_mem_region(DM365_ASYNC_EMIF_DATA_CE1_BASE, - SECTION_SIZE); -fail: - pr_err("ERROR: can't map CPLD\n"); - clk_disable_unprepare(aemif_clk); - return; - } - - /* External muxing for some signals */ - mux = 0; - - /* Read SW5 to set up NAND + keypad _or_ OneNAND (sync read). - * NOTE: SW4 bus width setting must match! - */ - if ((__raw_readb(cpld + CPLD_SWITCH) & BIT(5)) == 0) { - /* external keypad mux */ - mux |= BIT(7); - - rc = platform_device_register(&davinci_aemif_device); - if (rc) - pr_warn("%s(): error registering the aemif device: %d\n", - __func__, rc); - } else { - /* no OneNAND support yet */ - } - - /* Leave external chips in reset when unused. */ - resets = BIT(3) | BIT(2) | BIT(1) | BIT(0); - - /* Static video input config with SN74CBT16214 1-of-3 mux: - * - port b1 == tvp7002 (mux lowbits == 1 or 6) - * - port b2 == imager (mux lowbits == 2 or 7) - * - port b3 == tvp5146 (mux lowbits == 5) - * - * Runtime switching could work too, with limitations. - */ - if (have_imager()) { - label = "HD imager"; - mux |= 2; - - /* externally mux MMC1/ENET/AIC33 to imager */ - mux |= BIT(6) | BIT(5) | BIT(3); - } else { - struct davinci_soc_info *soc_info = &davinci_soc_info; - - /* we can use MMC1 ... */ - dm365evm_mmc_configure(); - davinci_setup_mmc(1, &dm365evm_mmc_config); - - /* ... and ENET ... */ - dm365evm_emac_configure(); - soc_info->emac_pdata->phy_id = DM365_EVM_PHY_ID; - resets &= ~BIT(3); - - /* ... and AIC33 */ - resets &= ~BIT(1); - - if (have_tvp7002()) { - mux |= 1; - resets &= ~BIT(2); - label = "tvp7002 HD"; - } else { - /* default to tvp5146 */ - mux |= 5; - resets &= ~BIT(0); - label = "tvp5146 SD"; - } - } - __raw_writeb(mux, cpld + CPLD_MUX); - __raw_writeb(resets, cpld + CPLD_RESETS); - pr_info("EVM: %s video input\n", label); - - /* REVISIT export switches: NTSC/PAL (SW5.6), EXTRA1 (SW5.2), etc */ -} - -static void __init dm365_evm_map_io(void) -{ - dm365_init(); -} - -static struct spi_eeprom at25640 = { - .byte_len = SZ_64K / 8, - .name = "at25640", - .page_size = 32, - .flags = EE_ADDR2, -}; - -static const struct spi_board_info dm365_evm_spi_info[] __initconst = { - { - .modalias = "at25", - .platform_data = &at25640, - .max_speed_hz = 10 * 1000 * 1000, - .bus_num = 0, - .chip_select = 0, - .mode = SPI_MODE_0, - }, -}; - -static __init void dm365_evm_init(void) -{ - int ret; - - dm365_register_clocks(); - - ret = dm365_gpio_register(); - if (ret) - pr_warn("%s: GPIO init failed: %d\n", __func__, ret); - - regulator_register_always_on(0, "fixed-dummy", fixed_supplies_1_8v, - ARRAY_SIZE(fixed_supplies_1_8v), 1800000); - regulator_register_always_on(1, "fixed-dummy", fixed_supplies_3_3v, - ARRAY_SIZE(fixed_supplies_3_3v), 3300000); - - nvmem_add_cell_table(&davinci_nvmem_cell_table); - nvmem_add_cell_lookups(&davinci_nvmem_cell_lookup, 1); - - evm_init_i2c(); - davinci_serial_init(dm365_serial_device); - - dm365evm_emac_configure(); - dm365evm_mmc_configure(); - - davinci_setup_mmc(0, &dm365evm_mmc_config); - - dm365_init_video(&vpfe_cfg, &dm365evm_display_cfg); - - /* maybe setup mmc1/etc ... _after_ mmc0 */ - evm_init_cpld(); - -#ifdef CONFIG_SND_SOC_DM365_AIC3X_CODEC - dm365_init_asp(); -#elif defined(CONFIG_SND_SOC_DM365_VOICE_CODEC) - dm365_init_vc(); -#endif - dm365_init_rtc(); - dm365_init_ks(&dm365evm_ks_data); - - dm365_init_spi0(BIT(0), dm365_evm_spi_info, - ARRAY_SIZE(dm365_evm_spi_info)); -} - -MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM") - .atag_offset = 0x100, - .map_io = dm365_evm_map_io, - .init_irq = dm365_init_irq, - .init_time = dm365_init_time, - .init_machine = dm365_evm_init, - .init_late = davinci_init_late, - .dma_zone_size = SZ_128M, -MACHINE_END diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c deleted file mode 100644 index a46e7b9ff8e0..000000000000 --- a/arch/arm/mach-davinci/board-mityomapl138.c +++ /dev/null @@ -1,638 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Critical Link MityOMAP-L138 SoM - * - * Copyright (C) 2010 Critical Link LLC - https://www.criticallink.com - */ - -#define pr_fmt(fmt) "MityOMAPL138: " fmt - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/console.h> -#include <linux/platform_device.h> -#include <linux/property.h> -#include <linux/mtd/partitions.h> -#include <linux/notifier.h> -#include <linux/nvmem-consumer.h> -#include <linux/nvmem-provider.h> -#include <linux/regulator/machine.h> -#include <linux/i2c.h> -#include <linux/etherdevice.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> - -#include <asm/io.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include "common.h" -#include "da8xx.h" -#include "mux.h" - -#include <linux/platform_data/mtd-davinci.h> -#include <linux/platform_data/mtd-davinci-aemif.h> -#include <linux/platform_data/ti-aemif.h> -#include <linux/platform_data/spi-davinci.h> - -#define MITYOMAPL138_PHY_ID "" - -#define FACTORY_CONFIG_MAGIC 0x012C0138 -#define FACTORY_CONFIG_VERSION 0x00010001 - -/* Data Held in On-Board I2C device */ -struct factory_config { - u32 magic; - u32 version; - u8 mac[6]; - u32 fpga_type; - u32 spare; - u32 serialnumber; - char partnum[32]; -}; - -static struct factory_config factory_config; - -#ifdef CONFIG_CPU_FREQ -struct part_no_info { - const char *part_no; /* part number string of interest */ - int max_freq; /* khz */ -}; - -static struct part_no_info mityomapl138_pn_info[] = { - { - .part_no = "L138-C", - .max_freq = 300000, - }, - { - .part_no = "L138-D", - .max_freq = 375000, - }, - { - .part_no = "L138-F", - .max_freq = 456000, - }, - { - .part_no = "1808-C", - .max_freq = 300000, - }, - { - .part_no = "1808-D", - .max_freq = 375000, - }, - { - .part_no = "1808-F", - .max_freq = 456000, - }, - { - .part_no = "1810-D", - .max_freq = 375000, - }, -}; - -static void mityomapl138_cpufreq_init(const char *partnum) -{ - int i, ret; - - for (i = 0; partnum && i < ARRAY_SIZE(mityomapl138_pn_info); i++) { - /* - * the part number has additional characters beyond what is - * stored in the table. This information is not needed for - * determining the speed grade, and would require several - * more table entries. Only check the first N characters - * for a match. - */ - if (!strncmp(partnum, mityomapl138_pn_info[i].part_no, - strlen(mityomapl138_pn_info[i].part_no))) { - da850_max_speed = mityomapl138_pn_info[i].max_freq; - break; - } - } - - ret = da850_register_cpufreq("pll0_sysclk3"); - if (ret) - pr_warn("cpufreq registration failed: %d\n", ret); -} -#else -static void mityomapl138_cpufreq_init(const char *partnum) { } -#endif - -static int read_factory_config(struct notifier_block *nb, - unsigned long event, void *data) -{ - int ret; - const char *partnum = NULL; - struct nvmem_device *nvmem = data; - - if (strcmp(nvmem_dev_name(nvmem), "1-00500") != 0) - return NOTIFY_DONE; - - if (!IS_BUILTIN(CONFIG_NVMEM)) { - pr_warn("Factory Config not available without CONFIG_NVMEM\n"); - goto bad_config; - } - - ret = nvmem_device_read(nvmem, 0, sizeof(factory_config), - &factory_config); - if (ret != sizeof(struct factory_config)) { - pr_warn("Read Factory Config Failed: %d\n", ret); - goto bad_config; - } - - if (factory_config.magic != FACTORY_CONFIG_MAGIC) { - pr_warn("Factory Config Magic Wrong (%X)\n", - factory_config.magic); - goto bad_config; - } - - if (factory_config.version != FACTORY_CONFIG_VERSION) { - pr_warn("Factory Config Version Wrong (%X)\n", - factory_config.version); - goto bad_config; - } - - partnum = factory_config.partnum; - pr_info("Part Number = %s\n", partnum); - -bad_config: - /* default maximum speed is valid for all platforms */ - mityomapl138_cpufreq_init(partnum); - - return NOTIFY_STOP; -} - -static struct notifier_block mityomapl138_nvmem_notifier = { - .notifier_call = read_factory_config, -}; - -/* - * We don't define a cell for factory config as it will be accessed from the - * board file using the nvmem notifier chain. - */ -static struct nvmem_cell_info mityomapl138_nvmem_cells[] = { - { - .name = "macaddr", - .offset = 0x64, - .bytes = ETH_ALEN, - } -}; - -static struct nvmem_cell_table mityomapl138_nvmem_cell_table = { - .nvmem_name = "1-00500", - .cells = mityomapl138_nvmem_cells, - .ncells = ARRAY_SIZE(mityomapl138_nvmem_cells), -}; - -static struct nvmem_cell_lookup mityomapl138_nvmem_cell_lookup = { - .nvmem_name = "1-00500", - .cell_name = "macaddr", - .dev_id = "davinci_emac.1", - .con_id = "mac-address", -}; - -static const struct property_entry mityomapl138_fd_chip_properties[] = { - PROPERTY_ENTRY_U32("pagesize", 8), - PROPERTY_ENTRY_BOOL("read-only"), - { } -}; - -static const struct software_node mityomapl138_fd_chip_node = { - .properties = mityomapl138_fd_chip_properties, -}; - -static struct davinci_i2c_platform_data mityomap_i2c_0_pdata = { - .bus_freq = 100, /* kHz */ - .bus_delay = 0, /* usec */ -}; - -/* TPS65023 voltage regulator support */ -/* 1.2V Core */ -static struct regulator_consumer_supply tps65023_dcdc1_consumers[] = { - { - .supply = "cvdd", - }, -}; - -/* 1.8V */ -static struct regulator_consumer_supply tps65023_dcdc2_consumers[] = { - { - .supply = "usb0_vdda18", - }, - { - .supply = "usb1_vdda18", - }, - { - .supply = "ddr_dvdd18", - }, - { - .supply = "sata_vddr", - }, -}; - -/* 1.2V */ -static struct regulator_consumer_supply tps65023_dcdc3_consumers[] = { - { - .supply = "sata_vdd", - }, - { - .supply = "usb_cvdd", - }, - { - .supply = "pll0_vdda", - }, - { - .supply = "pll1_vdda", - }, -}; - -/* 1.8V Aux LDO, not used */ -static struct regulator_consumer_supply tps65023_ldo1_consumers[] = { - { - .supply = "1.8v_aux", - }, -}; - -/* FPGA VCC Aux (2.5 or 3.3) LDO */ -static struct regulator_consumer_supply tps65023_ldo2_consumers[] = { - { - .supply = "vccaux", - }, -}; - -static struct regulator_init_data tps65023_regulator_data[] = { - /* dcdc1 */ - { - .constraints = { - .min_uV = 1150000, - .max_uV = 1350000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - .boot_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(tps65023_dcdc1_consumers), - .consumer_supplies = tps65023_dcdc1_consumers, - }, - /* dcdc2 */ - { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .boot_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(tps65023_dcdc2_consumers), - .consumer_supplies = tps65023_dcdc2_consumers, - }, - /* dcdc3 */ - { - .constraints = { - .min_uV = 1200000, - .max_uV = 1200000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .boot_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(tps65023_dcdc3_consumers), - .consumer_supplies = tps65023_dcdc3_consumers, - }, - /* ldo1 */ - { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .boot_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(tps65023_ldo1_consumers), - .consumer_supplies = tps65023_ldo1_consumers, - }, - /* ldo2 */ - { - .constraints = { - .min_uV = 2500000, - .max_uV = 3300000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - .boot_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(tps65023_ldo2_consumers), - .consumer_supplies = tps65023_ldo2_consumers, - }, -}; - -static struct i2c_board_info __initdata mityomap_tps65023_info[] = { - { - I2C_BOARD_INFO("tps65023", 0x48), - .platform_data = &tps65023_regulator_data[0], - }, - { - I2C_BOARD_INFO("24c02", 0x50), - .swnode = &mityomapl138_fd_chip_node, - }, -}; - -static int __init pmic_tps65023_init(void) -{ - return i2c_register_board_info(1, mityomap_tps65023_info, - ARRAY_SIZE(mityomap_tps65023_info)); -} - -/* - * SPI Devices: - * SPI1_CS0: 8M Flash ST-M25P64-VME6G - */ -static struct mtd_partition spi_flash_partitions[] = { - [0] = { - .name = "ubl", - .offset = 0, - .size = SZ_64K, - .mask_flags = MTD_WRITEABLE, - }, - [1] = { - .name = "u-boot", - .offset = MTDPART_OFS_APPEND, - .size = SZ_512K, - .mask_flags = MTD_WRITEABLE, - }, - [2] = { - .name = "u-boot-env", - .offset = MTDPART_OFS_APPEND, - .size = SZ_64K, - .mask_flags = MTD_WRITEABLE, - }, - [3] = { - .name = "periph-config", - .offset = MTDPART_OFS_APPEND, - .size = SZ_64K, - .mask_flags = MTD_WRITEABLE, - }, - [4] = { - .name = "reserved", - .offset = MTDPART_OFS_APPEND, - .size = SZ_256K + SZ_64K, - }, - [5] = { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = SZ_2M + SZ_1M, - }, - [6] = { - .name = "fpga", - .offset = MTDPART_OFS_APPEND, - .size = SZ_2M, - }, - [7] = { - .name = "spare", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct flash_platform_data mityomapl138_spi_flash_data = { - .name = "m25p80", - .parts = spi_flash_partitions, - .nr_parts = ARRAY_SIZE(spi_flash_partitions), - .type = "m24p64", -}; - -static struct davinci_spi_config spi_eprom_config = { - .io_type = SPI_IO_TYPE_DMA, - .c2tdelay = 8, - .t2cdelay = 8, -}; - -static struct spi_board_info mityomapl138_spi_flash_info[] = { - { - .modalias = "m25p80", - .platform_data = &mityomapl138_spi_flash_data, - .controller_data = &spi_eprom_config, - .mode = SPI_MODE_0, - .max_speed_hz = 30000000, - .bus_num = 1, - .chip_select = 0, - }, -}; - -/* - * MityDSP-L138 includes a 256 MByte large-page NAND flash - * (128K blocks). - */ -static struct mtd_partition mityomapl138_nandflash_partition[] = { - { - .name = "rootfs", - .offset = 0, - .size = SZ_128M, - .mask_flags = 0, /* MTD_WRITEABLE, */ - }, - { - .name = "homefs", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0, - }, -}; - -static struct davinci_nand_pdata mityomapl138_nandflash_data = { - .core_chipsel = 1, - .parts = mityomapl138_nandflash_partition, - .nr_parts = ARRAY_SIZE(mityomapl138_nandflash_partition), - .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST, - .bbt_options = NAND_BBT_USE_FLASH, - .options = NAND_BUSWIDTH_16, - .ecc_bits = 1, /* 4 bit mode is not supported with 16 bit NAND */ -}; - -static struct resource mityomapl138_nandflash_resource[] = { - { - .start = DA8XX_AEMIF_CS3_BASE, - .end = DA8XX_AEMIF_CS3_BASE + SZ_512K + 2 * SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = DA8XX_AEMIF_CTL_BASE, - .end = DA8XX_AEMIF_CTL_BASE + SZ_32K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device mityomapl138_aemif_devices[] = { - { - .name = "davinci_nand", - .id = 1, - .dev = { - .platform_data = &mityomapl138_nandflash_data, - }, - .num_resources = ARRAY_SIZE(mityomapl138_nandflash_resource), - .resource = mityomapl138_nandflash_resource, - }, -}; - -static struct resource mityomapl138_aemif_resources[] = { - { - .start = DA8XX_AEMIF_CTL_BASE, - .end = DA8XX_AEMIF_CTL_BASE + SZ_32K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct aemif_abus_data mityomapl138_aemif_abus_data[] = { - { - .cs = 1, - }, -}; - -static struct aemif_platform_data mityomapl138_aemif_pdata = { - .abus_data = mityomapl138_aemif_abus_data, - .num_abus_data = ARRAY_SIZE(mityomapl138_aemif_abus_data), - .sub_devices = mityomapl138_aemif_devices, - .num_sub_devices = ARRAY_SIZE(mityomapl138_aemif_devices), -}; - -static struct platform_device mityomapl138_aemif_device = { - .name = "ti-aemif", - .id = -1, - .dev = { - .platform_data = &mityomapl138_aemif_pdata, - }, - .resource = mityomapl138_aemif_resources, - .num_resources = ARRAY_SIZE(mityomapl138_aemif_resources), -}; - -static void __init mityomapl138_setup_nand(void) -{ - if (platform_device_register(&mityomapl138_aemif_device)) - pr_warn("%s: Cannot register AEMIF device\n", __func__); -} - -static const short mityomap_mii_pins[] = { - DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3, - DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER, - DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3, - DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK, - DA850_MDIO_D, - -1 -}; - -static const short mityomap_rmii_pins[] = { - DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN, - DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1, - DA850_RMII_RXER, DA850_RMII_MHZ_50_CLK, DA850_MDIO_CLK, - DA850_MDIO_D, - -1 -}; - -static void __init mityomapl138_config_emac(void) -{ - void __iomem *cfg_chip3_base; - int ret; - u32 val; - struct davinci_soc_info *soc_info = &davinci_soc_info; - - soc_info->emac_pdata->rmii_en = 0; /* hardcoded for now */ - - cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG); - val = __raw_readl(cfg_chip3_base); - - if (soc_info->emac_pdata->rmii_en) { - val |= BIT(8); - ret = davinci_cfg_reg_list(mityomap_rmii_pins); - pr_info("RMII PHY configured\n"); - } else { - val &= ~BIT(8); - ret = davinci_cfg_reg_list(mityomap_mii_pins); - pr_info("MII PHY configured\n"); - } - - if (ret) { - pr_warn("mii/rmii mux setup failed: %d\n", ret); - return; - } - - /* configure the CFGCHIP3 register for RMII or MII */ - __raw_writel(val, cfg_chip3_base); - - soc_info->emac_pdata->phy_id = MITYOMAPL138_PHY_ID; - - ret = da8xx_register_emac(); - if (ret) - pr_warn("emac registration failed: %d\n", ret); -} - -static void __init mityomapl138_init(void) -{ - int ret; - - da850_register_clocks(); - - /* for now, no special EDMA channels are reserved */ - ret = da850_register_edma(NULL); - if (ret) - pr_warn("edma registration failed: %d\n", ret); - - ret = da8xx_register_watchdog(); - if (ret) - pr_warn("watchdog registration failed: %d\n", ret); - - davinci_serial_init(da8xx_serial_device); - - nvmem_register_notifier(&mityomapl138_nvmem_notifier); - nvmem_add_cell_table(&mityomapl138_nvmem_cell_table); - nvmem_add_cell_lookups(&mityomapl138_nvmem_cell_lookup, 1); - - ret = da8xx_register_i2c(0, &mityomap_i2c_0_pdata); - if (ret) - pr_warn("i2c0 registration failed: %d\n", ret); - - ret = pmic_tps65023_init(); - if (ret) - pr_warn("TPS65023 PMIC init failed: %d\n", ret); - - mityomapl138_setup_nand(); - - ret = spi_register_board_info(mityomapl138_spi_flash_info, - ARRAY_SIZE(mityomapl138_spi_flash_info)); - if (ret) - pr_warn("spi info registration failed: %d\n", ret); - - ret = da8xx_register_spi_bus(1, - ARRAY_SIZE(mityomapl138_spi_flash_info)); - if (ret) - pr_warn("spi 1 registration failed: %d\n", ret); - - mityomapl138_config_emac(); - - ret = da8xx_register_rtc(); - if (ret) - pr_warn("rtc setup failed: %d\n", ret); - - ret = da8xx_register_cpuidle(); - if (ret) - pr_warn("cpuidle registration failed: %d\n", ret); - - davinci_pm_init(); -} - -#ifdef CONFIG_SERIAL_8250_CONSOLE -static int __init mityomapl138_console_init(void) -{ - if (!machine_is_mityomapl138()) - return 0; - - return add_preferred_console("ttyS", 1, "115200"); -} -console_initcall(mityomapl138_console_init); -#endif - -static void __init mityomapl138_map_io(void) -{ - da850_init(); -} - -MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808") - .atag_offset = 0x100, - .map_io = mityomapl138_map_io, - .init_irq = da850_init_irq, - .init_time = da850_init_time, - .init_machine = mityomapl138_init, - .init_late = davinci_init_late, - .dma_zone_size = SZ_128M, -MACHINE_END diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c deleted file mode 100644 index 8a80115999ad..000000000000 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ /dev/null @@ -1,451 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Hawkboard.org based on TI's OMAP-L138 Platform - * - * Initial code: Syed Mohammed Khasim - * - * Copyright (C) 2009 Texas Instruments Incorporated - https://www.ti.com - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/console.h> -#include <linux/interrupt.h> -#include <linux/gpio.h> -#include <linux/gpio/machine.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/rawnand.h> -#include <linux/platform_data/gpio-davinci.h> -#include <linux/platform_data/mtd-davinci.h> -#include <linux/platform_data/mtd-davinci-aemif.h> -#include <linux/platform_data/ti-aemif.h> -#include <linux/regulator/fixed.h> -#include <linux/regulator/machine.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include "common.h" -#include "da8xx.h" -#include "mux.h" - -#define HAWKBOARD_PHY_ID "davinci_mdio-0:07" - -#define DA850_USB1_VBUS_PIN GPIO_TO_PIN(2, 4) -#define DA850_USB1_OC_PIN GPIO_TO_PIN(6, 13) - -static short omapl138_hawk_mii_pins[] __initdata = { - DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3, - DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER, - DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3, - DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK, - DA850_MDIO_D, - -1 -}; - -static __init void omapl138_hawk_config_emac(void) -{ - void __iomem *cfgchip3 = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG); - int ret; - u32 val; - struct davinci_soc_info *soc_info = &davinci_soc_info; - - val = __raw_readl(cfgchip3); - val &= ~BIT(8); - ret = davinci_cfg_reg_list(omapl138_hawk_mii_pins); - if (ret) { - pr_warn("%s: CPGMAC/MII mux setup failed: %d\n", __func__, ret); - return; - } - - /* configure the CFGCHIP3 register for MII */ - __raw_writel(val, cfgchip3); - pr_info("EMAC: MII PHY configured\n"); - - soc_info->emac_pdata->phy_id = HAWKBOARD_PHY_ID; - - ret = da8xx_register_emac(); - if (ret) - pr_warn("%s: EMAC registration failed: %d\n", __func__, ret); -} - -/* - * The following EDMA channels/slots are not being used by drivers (for - * example: Timer, GPIO, UART events etc) on da850/omap-l138 EVM/Hawkboard, - * hence they are being reserved for codecs on the DSP side. - */ -static const s16 da850_dma0_rsv_chans[][2] = { - /* (offset, number) */ - { 8, 6}, - {24, 4}, - {30, 2}, - {-1, -1} -}; - -static const s16 da850_dma0_rsv_slots[][2] = { - /* (offset, number) */ - { 8, 6}, - {24, 4}, - {30, 50}, - {-1, -1} -}; - -static const s16 da850_dma1_rsv_chans[][2] = { - /* (offset, number) */ - { 0, 28}, - {30, 2}, - {-1, -1} -}; - -static const s16 da850_dma1_rsv_slots[][2] = { - /* (offset, number) */ - { 0, 28}, - {30, 90}, - {-1, -1} -}; - -static struct edma_rsv_info da850_edma_cc0_rsv = { - .rsv_chans = da850_dma0_rsv_chans, - .rsv_slots = da850_dma0_rsv_slots, -}; - -static struct edma_rsv_info da850_edma_cc1_rsv = { - .rsv_chans = da850_dma1_rsv_chans, - .rsv_slots = da850_dma1_rsv_slots, -}; - -static struct edma_rsv_info *da850_edma_rsv[2] = { - &da850_edma_cc0_rsv, - &da850_edma_cc1_rsv, -}; - -static const short hawk_mmcsd0_pins[] = { - DA850_MMCSD0_DAT_0, DA850_MMCSD0_DAT_1, DA850_MMCSD0_DAT_2, - DA850_MMCSD0_DAT_3, DA850_MMCSD0_CLK, DA850_MMCSD0_CMD, - DA850_GPIO3_12, DA850_GPIO3_13, - -1 -}; - -#define DA850_HAWK_MMCSD_CD_PIN GPIO_TO_PIN(3, 12) -#define DA850_HAWK_MMCSD_WP_PIN GPIO_TO_PIN(3, 13) - -static struct gpiod_lookup_table mmc_gpios_table = { - .dev_id = "da830-mmc.0", - .table = { - GPIO_LOOKUP("davinci_gpio", DA850_HAWK_MMCSD_CD_PIN, "cd", - GPIO_ACTIVE_LOW), - GPIO_LOOKUP("davinci_gpio", DA850_HAWK_MMCSD_WP_PIN, "wp", - GPIO_ACTIVE_LOW), - }, -}; - -static struct davinci_mmc_config da850_mmc_config = { - .wires = 4, - .max_freq = 50000000, - .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, -}; - -static __init void omapl138_hawk_mmc_init(void) -{ - int ret; - - ret = davinci_cfg_reg_list(hawk_mmcsd0_pins); - if (ret) { - pr_warn("%s: MMC/SD0 mux setup failed: %d\n", __func__, ret); - return; - } - - gpiod_add_lookup_table(&mmc_gpios_table); - - ret = da8xx_register_mmcsd0(&da850_mmc_config); - if (ret) { - pr_warn("%s: MMC/SD0 registration failed: %d\n", __func__, ret); - goto mmc_setup_mmcsd_fail; - } - - return; - -mmc_setup_mmcsd_fail: - gpiod_remove_lookup_table(&mmc_gpios_table); -} - -static struct mtd_partition omapl138_hawk_nandflash_partition[] = { - { - .name = "u-boot env", - .offset = 0, - .size = SZ_128K, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "u-boot", - .offset = MTDPART_OFS_APPEND, - .size = SZ_512K, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "free space", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0, - }, -}; - -static struct davinci_aemif_timing omapl138_hawk_nandflash_timing = { - .wsetup = 24, - .wstrobe = 21, - .whold = 14, - .rsetup = 19, - .rstrobe = 50, - .rhold = 0, - .ta = 20, -}; - -static struct davinci_nand_pdata omapl138_hawk_nandflash_data = { - .core_chipsel = 1, - .parts = omapl138_hawk_nandflash_partition, - .nr_parts = ARRAY_SIZE(omapl138_hawk_nandflash_partition), - .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST, - .ecc_bits = 4, - .bbt_options = NAND_BBT_USE_FLASH, - .options = NAND_BUSWIDTH_16, - .timing = &omapl138_hawk_nandflash_timing, - .mask_chipsel = 0, - .mask_ale = 0, - .mask_cle = 0, -}; - -static struct resource omapl138_hawk_nandflash_resource[] = { - { - .start = DA8XX_AEMIF_CS3_BASE, - .end = DA8XX_AEMIF_CS3_BASE + SZ_32M, - .flags = IORESOURCE_MEM, - }, - { - .start = DA8XX_AEMIF_CTL_BASE, - .end = DA8XX_AEMIF_CTL_BASE + SZ_32K, - .flags = IORESOURCE_MEM, - }, -}; - -static struct resource omapl138_hawk_aemif_resource[] = { - { - .start = DA8XX_AEMIF_CTL_BASE, - .end = DA8XX_AEMIF_CTL_BASE + SZ_32K, - .flags = IORESOURCE_MEM, - } -}; - -static struct aemif_abus_data omapl138_hawk_aemif_abus_data[] = { - { - .cs = 3, - } -}; - -static struct platform_device omapl138_hawk_aemif_devices[] = { - { - .name = "davinci_nand", - .id = -1, - .dev = { - .platform_data = &omapl138_hawk_nandflash_data, - }, - .resource = omapl138_hawk_nandflash_resource, - .num_resources = ARRAY_SIZE(omapl138_hawk_nandflash_resource), - } -}; - -static struct aemif_platform_data omapl138_hawk_aemif_pdata = { - .cs_offset = 2, - .abus_data = omapl138_hawk_aemif_abus_data, - .num_abus_data = ARRAY_SIZE(omapl138_hawk_aemif_abus_data), - .sub_devices = omapl138_hawk_aemif_devices, - .num_sub_devices = ARRAY_SIZE(omapl138_hawk_aemif_devices), -}; - -static struct platform_device omapl138_hawk_aemif_device = { - .name = "ti-aemif", - .id = -1, - .dev = { - .platform_data = &omapl138_hawk_aemif_pdata, - }, - .resource = omapl138_hawk_aemif_resource, - .num_resources = ARRAY_SIZE(omapl138_hawk_aemif_resource), -}; - -static const short omapl138_hawk_nand_pins[] = { - DA850_EMA_WAIT_1, DA850_NEMA_OE, DA850_NEMA_WE, DA850_NEMA_CS_3, - DA850_EMA_D_0, DA850_EMA_D_1, DA850_EMA_D_2, DA850_EMA_D_3, - DA850_EMA_D_4, DA850_EMA_D_5, DA850_EMA_D_6, DA850_EMA_D_7, - DA850_EMA_D_8, DA850_EMA_D_9, DA850_EMA_D_10, DA850_EMA_D_11, - DA850_EMA_D_12, DA850_EMA_D_13, DA850_EMA_D_14, DA850_EMA_D_15, - DA850_EMA_A_1, DA850_EMA_A_2, - -1 -}; - -static int omapl138_hawk_register_aemif(void) -{ - int ret; - - ret = davinci_cfg_reg_list(omapl138_hawk_nand_pins); - if (ret) - pr_warn("%s: NAND mux setup failed: %d\n", __func__, ret); - - return platform_device_register(&omapl138_hawk_aemif_device); -} - -static const short da850_hawk_usb11_pins[] = { - DA850_GPIO2_4, DA850_GPIO6_13, - -1 -}; - -static struct regulator_consumer_supply hawk_usb_supplies[] = { - REGULATOR_SUPPLY("vbus", NULL), -}; - -static struct regulator_init_data hawk_usb_vbus_data = { - .consumer_supplies = hawk_usb_supplies, - .num_consumer_supplies = ARRAY_SIZE(hawk_usb_supplies), - .constraints = { - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, -}; - -static struct fixed_voltage_config hawk_usb_vbus = { - .supply_name = "vbus", - .microvolts = 3300000, - .init_data = &hawk_usb_vbus_data, -}; - -static struct platform_device hawk_usb_vbus_device = { - .name = "reg-fixed-voltage", - .id = 0, - .dev = { - .platform_data = &hawk_usb_vbus, - }, -}; - -static struct gpiod_lookup_table hawk_usb_oc_gpio_lookup = { - .dev_id = "ohci-da8xx", - .table = { - GPIO_LOOKUP("davinci_gpio", DA850_USB1_OC_PIN, "oc", 0), - { } - }, -}; - -static struct gpiod_lookup_table hawk_usb_vbus_gpio_lookup = { - .dev_id = "reg-fixed-voltage.0", - .table = { - GPIO_LOOKUP("davinci_gpio", DA850_USB1_VBUS_PIN, NULL, 0), - { } - }, -}; - -static struct gpiod_lookup_table *hawk_usb_gpio_lookups[] = { - &hawk_usb_oc_gpio_lookup, - &hawk_usb_vbus_gpio_lookup, -}; - -static struct da8xx_ohci_root_hub omapl138_hawk_usb11_pdata = { - /* TPS2087 switch @ 5V */ - .potpgt = (3 + 1) / 2, /* 3 ms max */ -}; - -static __init void omapl138_hawk_usb_init(void) -{ - int ret; - - ret = davinci_cfg_reg_list(da850_hawk_usb11_pins); - if (ret) { - pr_warn("%s: USB 1.1 PinMux setup failed: %d\n", __func__, ret); - return; - } - - ret = da8xx_register_usb_phy_clocks(); - if (ret) - pr_warn("%s: USB PHY CLK registration failed: %d\n", - __func__, ret); - - gpiod_add_lookup_tables(hawk_usb_gpio_lookups, - ARRAY_SIZE(hawk_usb_gpio_lookups)); - - ret = da8xx_register_usb_phy(); - if (ret) - pr_warn("%s: USB PHY registration failed: %d\n", - __func__, ret); - - ret = platform_device_register(&hawk_usb_vbus_device); - if (ret) { - pr_warn("%s: Unable to register the vbus supply\n", __func__); - return; - } - - ret = da8xx_register_usb11(&omapl138_hawk_usb11_pdata); - if (ret) - pr_warn("%s: USB 1.1 registration failed: %d\n", __func__, ret); - - return; -} - -static __init void omapl138_hawk_init(void) -{ - int ret; - - da850_register_clocks(); - - ret = da850_register_gpio(); - if (ret) - pr_warn("%s: GPIO init failed: %d\n", __func__, ret); - - davinci_serial_init(da8xx_serial_device); - - omapl138_hawk_config_emac(); - - ret = da850_register_edma(da850_edma_rsv); - if (ret) - pr_warn("%s: EDMA registration failed: %d\n", __func__, ret); - - omapl138_hawk_mmc_init(); - - omapl138_hawk_usb_init(); - - ret = omapl138_hawk_register_aemif(); - if (ret) - pr_warn("%s: aemif registration failed: %d\n", __func__, ret); - - ret = da8xx_register_watchdog(); - if (ret) - pr_warn("%s: watchdog registration failed: %d\n", - __func__, ret); - - ret = da8xx_register_rproc(); - if (ret) - pr_warn("%s: dsp/rproc registration failed: %d\n", - __func__, ret); - - regulator_has_full_constraints(); -} - -#ifdef CONFIG_SERIAL_8250_CONSOLE -static int __init omapl138_hawk_console_init(void) -{ - if (!machine_is_omapl138_hawkboard()) - return 0; - - return add_preferred_console("ttyS", 2, "115200"); -} -console_initcall(omapl138_hawk_console_init); -#endif - -static void __init omapl138_hawk_map_io(void) -{ - da850_init(); -} - -MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard") - .atag_offset = 0x100, - .map_io = omapl138_hawk_map_io, - .init_irq = da850_init_irq, - .init_time = da850_init_time, - .init_machine = omapl138_hawk_init, - .init_late = davinci_init_late, - .dma_zone_size = SZ_128M, - .reserve = da8xx_rproc_reserve_cma, -MACHINE_END diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c deleted file mode 100644 index 199c26d9a2b6..000000000000 --- a/arch/arm/mach-davinci/devices.c +++ /dev/null @@ -1,303 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * mach-davinci/devices.c - * - * DaVinci platform device setup/initialization - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/platform_data/i2c-davinci.h> -#include <linux/platform_data/mmc-davinci.h> -#include <linux/platform_data/edma.h> -#include <linux/dma-mapping.h> -#include <linux/io.h> -#include <linux/reboot.h> - -#include "hardware.h" -#include "cputype.h" -#include "mux.h" -#include "davinci.h" -#include "irqs.h" - -#define DAVINCI_I2C_BASE 0x01C21000 -#define DAVINCI_ATA_BASE 0x01C66000 -#define DAVINCI_MMCSD0_BASE 0x01E10000 -#define DM355_MMCSD0_BASE 0x01E11000 -#define DM355_MMCSD1_BASE 0x01E00000 -#define DM365_MMCSD0_BASE 0x01D11000 -#define DM365_MMCSD1_BASE 0x01D00000 - -void __iomem *davinci_sysmod_base; - -void davinci_map_sysmod(void) -{ - davinci_sysmod_base = ioremap(DAVINCI_SYSTEM_MODULE_BASE, - 0x800); - /* - * Throw a bug since a lot of board initialization code depends - * on system module availability. ioremap() failing this early - * need careful looking into anyway. - */ - BUG_ON(!davinci_sysmod_base); -} - -static struct resource i2c_resources[] = { - { - .start = DAVINCI_I2C_BASE, - .end = DAVINCI_I2C_BASE + 0x40, - .flags = IORESOURCE_MEM, - }, - { - .start = DAVINCI_INTC_IRQ(IRQ_I2C), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device davinci_i2c_device = { - .name = "i2c_davinci", - .id = 1, - .num_resources = ARRAY_SIZE(i2c_resources), - .resource = i2c_resources, -}; - -void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata) -{ - if (cpu_is_davinci_dm644x()) - davinci_cfg_reg(DM644X_I2C); - - davinci_i2c_device.dev.platform_data = pdata; - (void) platform_device_register(&davinci_i2c_device); -} - -static struct resource ide_resources[] = { - { - .start = DAVINCI_ATA_BASE, - .end = DAVINCI_ATA_BASE + 0x7ff, - .flags = IORESOURCE_MEM, - }, - { - .start = DAVINCI_INTC_IRQ(IRQ_IDE), - .end = DAVINCI_INTC_IRQ(IRQ_IDE), - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 ide_dma_mask = DMA_BIT_MASK(32); - -static struct platform_device ide_device = { - .name = "palm_bk3710", - .id = -1, - .resource = ide_resources, - .num_resources = ARRAY_SIZE(ide_resources), - .dev = { - .dma_mask = &ide_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -void __init davinci_init_ide(void) -{ - if (cpu_is_davinci_dm644x()) { - davinci_cfg_reg(DM644X_HPIEN_DISABLE); - davinci_cfg_reg(DM644X_ATAEN); - davinci_cfg_reg(DM644X_HDIREN); - } else if (cpu_is_davinci_dm646x()) { - /* IRQ_DM646X_IDE is the same as IRQ_IDE */ - davinci_cfg_reg(DM646X_ATAEN); - } else { - WARN_ON(1); - return; - } - - platform_device_register(&ide_device); -} - -#if IS_ENABLED(CONFIG_MMC_DAVINCI) - -static u64 mmcsd0_dma_mask = DMA_BIT_MASK(32); - -static struct resource mmcsd0_resources[] = { - { - /* different on dm355 */ - .start = DAVINCI_MMCSD0_BASE, - .end = DAVINCI_MMCSD0_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - /* IRQs: MMC/SD, then SDIO */ - { - .start = DAVINCI_INTC_IRQ(IRQ_MMCINT), - .flags = IORESOURCE_IRQ, - }, { - /* different on dm355 */ - .start = DAVINCI_INTC_IRQ(IRQ_SDIOINT), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device davinci_mmcsd0_device = { - .name = "dm6441-mmc", - .id = 0, - .dev = { - .dma_mask = &mmcsd0_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(mmcsd0_resources), - .resource = mmcsd0_resources, -}; - -static u64 mmcsd1_dma_mask = DMA_BIT_MASK(32); - -static struct resource mmcsd1_resources[] = { - { - .start = DM355_MMCSD1_BASE, - .end = DM355_MMCSD1_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - /* IRQs: MMC/SD, then SDIO */ - { - .start = DAVINCI_INTC_IRQ(IRQ_DM355_MMCINT1), - .flags = IORESOURCE_IRQ, - }, { - .start = DAVINCI_INTC_IRQ(IRQ_DM355_SDIOINT1), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device davinci_mmcsd1_device = { - .name = "dm6441-mmc", - .id = 1, - .dev = { - .dma_mask = &mmcsd1_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(mmcsd1_resources), - .resource = mmcsd1_resources, -}; - - -void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config) -{ - struct platform_device *pdev = NULL; - - if (WARN_ON(cpu_is_davinci_dm646x())) - return; - - /* REVISIT: update PINMUX, ARM_IRQMUX, and EDMA_EVTMUX here too; - * for example if MMCSD1 is used for SDIO, maybe DAT2 is unused. - * - * FIXME dm6441 (no MMC/SD), dm357 (one), and dm335 (two) are - * not handled right here ... - */ - switch (module) { - case 1: - if (cpu_is_davinci_dm355()) { - /* REVISIT we may not need all these pins if e.g. this - * is a hard-wired SDIO device... - */ - davinci_cfg_reg(DM355_SD1_CMD); - davinci_cfg_reg(DM355_SD1_CLK); - davinci_cfg_reg(DM355_SD1_DATA0); - davinci_cfg_reg(DM355_SD1_DATA1); - davinci_cfg_reg(DM355_SD1_DATA2); - davinci_cfg_reg(DM355_SD1_DATA3); - } else if (cpu_is_davinci_dm365()) { - /* Configure pull down control */ - unsigned v; - - v = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_PUPDCTL1)); - __raw_writel(v & ~0xfc0, - DAVINCI_SYSMOD_VIRT(SYSMOD_PUPDCTL1)); - - mmcsd1_resources[0].start = DM365_MMCSD1_BASE; - mmcsd1_resources[0].end = DM365_MMCSD1_BASE + - SZ_4K - 1; - mmcsd1_resources[2].start = DAVINCI_INTC_IRQ( - IRQ_DM365_SDIOINT1); - davinci_mmcsd1_device.name = "da830-mmc"; - } else - break; - - pdev = &davinci_mmcsd1_device; - break; - case 0: - if (cpu_is_davinci_dm355()) { - mmcsd0_resources[0].start = DM355_MMCSD0_BASE; - mmcsd0_resources[0].end = DM355_MMCSD0_BASE + SZ_4K - 1; - mmcsd0_resources[2].start = DAVINCI_INTC_IRQ( - IRQ_DM355_SDIOINT0); - - /* expose all 6 MMC0 signals: CLK, CMD, DATA[0..3] */ - davinci_cfg_reg(DM355_MMCSD0); - - /* enable RX EDMA */ - davinci_cfg_reg(DM355_EVT26_MMC0_RX); - } else if (cpu_is_davinci_dm365()) { - mmcsd0_resources[0].start = DM365_MMCSD0_BASE; - mmcsd0_resources[0].end = DM365_MMCSD0_BASE + - SZ_4K - 1; - mmcsd0_resources[2].start = DAVINCI_INTC_IRQ( - IRQ_DM365_SDIOINT0); - davinci_mmcsd0_device.name = "da830-mmc"; - } else if (cpu_is_davinci_dm644x()) { - /* REVISIT: should this be in board-init code? */ - /* Power-on 3.3V IO cells */ - __raw_writel(0, - DAVINCI_SYSMOD_VIRT(SYSMOD_VDD3P3VPWDN)); - /*Set up the pull regiter for MMC */ - davinci_cfg_reg(DM644X_MSTK); - } - - pdev = &davinci_mmcsd0_device; - break; - } - - if (WARN_ON(!pdev)) - return; - - pdev->dev.platform_data = config; - platform_device_register(pdev); -} - -#else - -void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config) -{ -} - -#endif - -/*-------------------------------------------------------------------------*/ - -static struct resource wdt_resources[] = { - { - .start = DAVINCI_WDOG_BASE, - .end = DAVINCI_WDOG_BASE + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device davinci_wdt_device = { - .name = "davinci-wdt", - .id = -1, - .num_resources = ARRAY_SIZE(wdt_resources), - .resource = wdt_resources, -}; - -int davinci_init_wdt(void) -{ - return platform_device_register(&davinci_wdt_device); -} - -static struct platform_device davinci_gpio_device = { - .name = "davinci_gpio", - .id = -1, -}; - -int davinci_gpio_register(struct resource *res, int size, void *pdata) -{ - davinci_gpio_device.resource = res; - davinci_gpio_device.num_resources = size; - davinci_gpio_device.dev.platform_data = pdata; - return platform_device_register(&davinci_gpio_device); -} diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c deleted file mode 100644 index a12ba859beca..000000000000 --- a/arch/arm/mach-davinci/dm355.c +++ /dev/null @@ -1,832 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * TI DaVinci DM355 chip specific setup - * - * Author: Kevin Hilman, Deep Root Systems, LLC - * - * 2007 (c) Deep Root Systems, LLC. - */ - -#include <linux/clk-provider.h> -#include <linux/clk/davinci.h> -#include <linux/clkdev.h> -#include <linux/dma-mapping.h> -#include <linux/dmaengine.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/irqchip/irq-davinci-aintc.h> -#include <linux/platform_data/edma.h> -#include <linux/platform_data/gpio-davinci.h> -#include <linux/platform_data/spi-davinci.h> -#include <linux/platform_device.h> -#include <linux/serial_8250.h> -#include <linux/spi/spi.h> - -#include <clocksource/timer-davinci.h> - -#include <asm/mach/map.h> - -#include "common.h" -#include "cputype.h" -#include "serial.h" -#include "asp.h" -#include "davinci.h" -#include "irqs.h" -#include "mux.h" - -#define DM355_UART2_BASE (IO_PHYS + 0x206000) -#define DM355_OSD_BASE (IO_PHYS + 0x70200) -#define DM355_VENC_BASE (IO_PHYS + 0x70400) - -/* - * Device specific clocks - */ -#define DM355_REF_FREQ 24000000 /* 24 or 36 MHz */ - -static u64 dm355_spi0_dma_mask = DMA_BIT_MASK(32); - -static struct resource dm355_spi0_resources[] = { - { - .start = 0x01c66000, - .end = 0x01c667ff, - .flags = IORESOURCE_MEM, - }, - { - .start = DAVINCI_INTC_IRQ(IRQ_DM355_SPINT0_0), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct davinci_spi_platform_data dm355_spi0_pdata = { - .version = SPI_VERSION_1, - .num_chipselect = 2, - .cshold_bug = true, - .dma_event_q = EVENTQ_1, - .prescaler_limit = 1, -}; -static struct platform_device dm355_spi0_device = { - .name = "spi_davinci", - .id = 0, - .dev = { - .dma_mask = &dm355_spi0_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &dm355_spi0_pdata, - }, - .num_resources = ARRAY_SIZE(dm355_spi0_resources), - .resource = dm355_spi0_resources, -}; - -void __init dm355_init_spi0(unsigned chipselect_mask, - const struct spi_board_info *info, unsigned len) -{ - /* for now, assume we need MISO */ - davinci_cfg_reg(DM355_SPI0_SDI); - - /* not all slaves will be wired up */ - if (chipselect_mask & BIT(0)) - davinci_cfg_reg(DM355_SPI0_SDENA0); - if (chipselect_mask & BIT(1)) - davinci_cfg_reg(DM355_SPI0_SDENA1); - - spi_register_board_info(info, len); - - platform_device_register(&dm355_spi0_device); -} - -/*----------------------------------------------------------------------*/ - -#define INTMUX 0x18 -#define EVTMUX 0x1c - -/* - * Device specific mux setup - * - * soc description mux mode mode mux dbg - * reg offset mask mode - */ -static const struct mux_config dm355_pins[] = { -#ifdef CONFIG_DAVINCI_MUX -MUX_CFG(DM355, MMCSD0, 4, 2, 1, 0, false) - -MUX_CFG(DM355, SD1_CLK, 3, 6, 1, 1, false) -MUX_CFG(DM355, SD1_CMD, 3, 7, 1, 1, false) -MUX_CFG(DM355, SD1_DATA3, 3, 8, 3, 1, false) -MUX_CFG(DM355, SD1_DATA2, 3, 10, 3, 1, false) -MUX_CFG(DM355, SD1_DATA1, 3, 12, 3, 1, false) -MUX_CFG(DM355, SD1_DATA0, 3, 14, 3, 1, false) - -MUX_CFG(DM355, I2C_SDA, 3, 19, 1, 1, false) -MUX_CFG(DM355, I2C_SCL, 3, 20, 1, 1, false) - -MUX_CFG(DM355, MCBSP0_BDX, 3, 0, 1, 1, false) -MUX_CFG(DM355, MCBSP0_X, 3, 1, 1, 1, false) -MUX_CFG(DM355, MCBSP0_BFSX, 3, 2, 1, 1, false) -MUX_CFG(DM355, MCBSP0_BDR, 3, 3, 1, 1, false) -MUX_CFG(DM355, MCBSP0_R, 3, 4, 1, 1, false) -MUX_CFG(DM355, MCBSP0_BFSR, 3, 5, 1, 1, false) - -MUX_CFG(DM355, SPI0_SDI, 4, 1, 1, 0, false) -MUX_CFG(DM355, SPI0_SDENA0, 4, 0, 1, 0, false) -MUX_CFG(DM355, SPI0_SDENA1, 3, 28, 1, 1, false) - -INT_CFG(DM355, INT_EDMA_CC, 2, 1, 1, false) -INT_CFG(DM355, INT_EDMA_TC0_ERR, 3, 1, 1, false) -INT_CFG(DM355, INT_EDMA_TC1_ERR, 4, 1, 1, false) - -EVT_CFG(DM355, EVT8_ASP1_TX, 0, 1, 0, false) -EVT_CFG(DM355, EVT9_ASP1_RX, 1, 1, 0, false) -EVT_CFG(DM355, EVT26_MMC0_RX, 2, 1, 0, false) - -MUX_CFG(DM355, VOUT_FIELD, 1, 18, 3, 1, false) -MUX_CFG(DM355, VOUT_FIELD_G70, 1, 18, 3, 0, false) -MUX_CFG(DM355, VOUT_HVSYNC, 1, 16, 1, 0, false) -MUX_CFG(DM355, VOUT_COUTL_EN, 1, 0, 0xff, 0x55, false) -MUX_CFG(DM355, VOUT_COUTH_EN, 1, 8, 0xff, 0x55, false) - -MUX_CFG(DM355, VIN_PCLK, 0, 14, 1, 1, false) -MUX_CFG(DM355, VIN_CAM_WEN, 0, 13, 1, 1, false) -MUX_CFG(DM355, VIN_CAM_VD, 0, 12, 1, 1, false) -MUX_CFG(DM355, VIN_CAM_HD, 0, 11, 1, 1, false) -MUX_CFG(DM355, VIN_YIN_EN, 0, 10, 1, 1, false) -MUX_CFG(DM355, VIN_CINL_EN, 0, 0, 0xff, 0x55, false) -MUX_CFG(DM355, VIN_CINH_EN, 0, 8, 3, 3, false) -#endif -}; - -static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = { - [IRQ_DM355_CCDC_VDINT0] = 2, - [IRQ_DM355_CCDC_VDINT1] = 6, - [IRQ_DM355_CCDC_VDINT2] = 6, - [IRQ_DM355_IPIPE_HST] = 6, - [IRQ_DM355_H3AINT] = 6, - [IRQ_DM355_IPIPE_SDR] = 6, - [IRQ_DM355_IPIPEIFINT] = 6, - [IRQ_DM355_OSDINT] = 7, - [IRQ_DM355_VENCINT] = 6, - [IRQ_ASQINT] = 6, - [IRQ_IMXINT] = 6, - [IRQ_USBINT] = 4, - [IRQ_DM355_RTOINT] = 4, - [IRQ_DM355_UARTINT2] = 7, - [IRQ_DM355_TINT6] = 7, - [IRQ_CCINT0] = 5, /* dma */ - [IRQ_CCERRINT] = 5, /* dma */ - [IRQ_TCERRINT0] = 5, /* dma */ - [IRQ_TCERRINT] = 5, /* dma */ - [IRQ_DM355_SPINT2_1] = 7, - [IRQ_DM355_TINT7] = 4, - [IRQ_DM355_SDIOINT0] = 7, - [IRQ_MBXINT] = 7, - [IRQ_MBRINT] = 7, - [IRQ_MMCINT] = 7, - [IRQ_DM355_MMCINT1] = 7, - [IRQ_DM355_PWMINT3] = 7, - [IRQ_DDRINT] = 7, - [IRQ_AEMIFINT] = 7, - [IRQ_DM355_SDIOINT1] = 4, - [IRQ_TINT0_TINT12] = 2, /* clockevent */ - [IRQ_TINT0_TINT34] = 2, /* clocksource */ - [IRQ_TINT1_TINT12] = 7, /* DSP timer */ - [IRQ_TINT1_TINT34] = 7, /* system tick */ - [IRQ_PWMINT0] = 7, - [IRQ_PWMINT1] = 7, - [IRQ_PWMINT2] = 7, - [IRQ_I2C] = 3, - [IRQ_UARTINT0] = 3, - [IRQ_UARTINT1] = 3, - [IRQ_DM355_SPINT0_0] = 3, - [IRQ_DM355_SPINT0_1] = 3, - [IRQ_DM355_GPIO0] = 3, - [IRQ_DM355_GPIO1] = 7, - [IRQ_DM355_GPIO2] = 4, - [IRQ_DM355_GPIO3] = 4, - [IRQ_DM355_GPIO4] = 7, - [IRQ_DM355_GPIO5] = 7, - [IRQ_DM355_GPIO6] = 7, - [IRQ_DM355_GPIO7] = 7, - [IRQ_DM355_GPIO8] = 7, - [IRQ_DM355_GPIO9] = 7, - [IRQ_DM355_GPIOBNK0] = 7, - [IRQ_DM355_GPIOBNK1] = 7, - [IRQ_DM355_GPIOBNK2] = 7, - [IRQ_DM355_GPIOBNK3] = 7, - [IRQ_DM355_GPIOBNK4] = 7, - [IRQ_DM355_GPIOBNK5] = 7, - [IRQ_DM355_GPIOBNK6] = 7, - [IRQ_COMMTX] = 7, - [IRQ_COMMRX] = 7, - [IRQ_EMUINT] = 7, -}; - -/*----------------------------------------------------------------------*/ - -static s8 queue_priority_mapping[][2] = { - /* {event queue no, Priority} */ - {0, 3}, - {1, 7}, - {-1, -1}, -}; - -static const struct dma_slave_map dm355_edma_map[] = { - { "davinci-mcbsp.0", "tx", EDMA_FILTER_PARAM(0, 2) }, - { "davinci-mcbsp.0", "rx", EDMA_FILTER_PARAM(0, 3) }, - { "davinci-mcbsp.1", "tx", EDMA_FILTER_PARAM(0, 8) }, - { "davinci-mcbsp.1", "rx", EDMA_FILTER_PARAM(0, 9) }, - { "spi_davinci.2", "tx", EDMA_FILTER_PARAM(0, 10) }, - { "spi_davinci.2", "rx", EDMA_FILTER_PARAM(0, 11) }, - { "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 14) }, - { "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 15) }, - { "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 16) }, - { "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 17) }, - { "dm6441-mmc.0", "rx", EDMA_FILTER_PARAM(0, 26) }, - { "dm6441-mmc.0", "tx", EDMA_FILTER_PARAM(0, 27) }, - { "dm6441-mmc.1", "rx", EDMA_FILTER_PARAM(0, 30) }, - { "dm6441-mmc.1", "tx", EDMA_FILTER_PARAM(0, 31) }, -}; - -static struct edma_soc_info dm355_edma_pdata = { - .queue_priority_mapping = queue_priority_mapping, - .default_queue = EVENTQ_1, - .slave_map = dm355_edma_map, - .slavecnt = ARRAY_SIZE(dm355_edma_map), -}; - -static struct resource edma_resources[] = { - { - .name = "edma3_cc", - .start = 0x01c00000, - .end = 0x01c00000 + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "edma3_tc0", - .start = 0x01c10000, - .end = 0x01c10000 + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "edma3_tc1", - .start = 0x01c10400, - .end = 0x01c10400 + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "edma3_ccint", - .start = DAVINCI_INTC_IRQ(IRQ_CCINT0), - .flags = IORESOURCE_IRQ, - }, - { - .name = "edma3_ccerrint", - .start = DAVINCI_INTC_IRQ(IRQ_CCERRINT), - .flags = IORESOURCE_IRQ, - }, - /* not using (or muxing) TC*_ERR */ -}; - -static const struct platform_device_info dm355_edma_device __initconst = { - .name = "edma", - .id = 0, - .dma_mask = DMA_BIT_MASK(32), - .res = edma_resources, - .num_res = ARRAY_SIZE(edma_resources), - .data = &dm355_edma_pdata, - .size_data = sizeof(dm355_edma_pdata), -}; - -static struct resource dm355_asp1_resources[] = { - { - .name = "mpu", - .start = DAVINCI_ASP1_BASE, - .end = DAVINCI_ASP1_BASE + SZ_8K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = DAVINCI_DMA_ASP1_TX, - .end = DAVINCI_DMA_ASP1_TX, - .flags = IORESOURCE_DMA, - }, - { - .start = DAVINCI_DMA_ASP1_RX, - .end = DAVINCI_DMA_ASP1_RX, - .flags = IORESOURCE_DMA, - }, -}; - -static struct platform_device dm355_asp1_device = { - .name = "davinci-mcbsp", - .id = 1, - .num_resources = ARRAY_SIZE(dm355_asp1_resources), - .resource = dm355_asp1_resources, -}; - -static void dm355_ccdc_setup_pinmux(void) -{ - davinci_cfg_reg(DM355_VIN_PCLK); - davinci_cfg_reg(DM355_VIN_CAM_WEN); - davinci_cfg_reg(DM355_VIN_CAM_VD); - davinci_cfg_reg(DM355_VIN_CAM_HD); - davinci_cfg_reg(DM355_VIN_YIN_EN); - davinci_cfg_reg(DM355_VIN_CINL_EN); - davinci_cfg_reg(DM355_VIN_CINH_EN); -} - -static struct resource dm355_vpss_resources[] = { - { - /* VPSS BL Base address */ - .name = "vpss", - .start = 0x01c70800, - .end = 0x01c70800 + 0xff, - .flags = IORESOURCE_MEM, - }, - { - /* VPSS CLK Base address */ - .name = "vpss", - .start = 0x01c70000, - .end = 0x01c70000 + 0xf, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device dm355_vpss_device = { - .name = "vpss", - .id = -1, - .dev.platform_data = "dm355_vpss", - .num_resources = ARRAY_SIZE(dm355_vpss_resources), - .resource = dm355_vpss_resources, -}; - -static struct resource vpfe_resources[] = { - { - .start = DAVINCI_INTC_IRQ(IRQ_VDINT0), - .end = DAVINCI_INTC_IRQ(IRQ_VDINT0), - .flags = IORESOURCE_IRQ, - }, - { - .start = DAVINCI_INTC_IRQ(IRQ_VDINT1), - .end = DAVINCI_INTC_IRQ(IRQ_VDINT1), - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32); -static struct resource dm355_ccdc_resource[] = { - /* CCDC Base address */ - { - .flags = IORESOURCE_MEM, - .start = 0x01c70600, - .end = 0x01c70600 + 0x1ff, - }, -}; -static struct platform_device dm355_ccdc_dev = { - .name = "dm355_ccdc", - .id = -1, - .num_resources = ARRAY_SIZE(dm355_ccdc_resource), - .resource = dm355_ccdc_resource, - .dev = { - .dma_mask = &vpfe_capture_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = dm355_ccdc_setup_pinmux, - }, -}; - -static struct platform_device vpfe_capture_dev = { - .name = CAPTURE_DRV_NAME, - .id = -1, - .num_resources = ARRAY_SIZE(vpfe_resources), - .resource = vpfe_resources, - .dev = { - .dma_mask = &vpfe_capture_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -static struct resource dm355_osd_resources[] = { - { - .start = DM355_OSD_BASE, - .end = DM355_OSD_BASE + 0x17f, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device dm355_osd_dev = { - .name = DM355_VPBE_OSD_SUBDEV_NAME, - .id = -1, - .num_resources = ARRAY_SIZE(dm355_osd_resources), - .resource = dm355_osd_resources, - .dev = { - .dma_mask = &vpfe_capture_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -static struct resource dm355_venc_resources[] = { - { - .start = DAVINCI_INTC_IRQ(IRQ_VENCINT), - .end = DAVINCI_INTC_IRQ(IRQ_VENCINT), - .flags = IORESOURCE_IRQ, - }, - /* venc registers io space */ - { - .start = DM355_VENC_BASE, - .end = DM355_VENC_BASE + 0x17f, - .flags = IORESOURCE_MEM, - }, - /* VDAC config register io space */ - { - .start = DAVINCI_SYSTEM_MODULE_BASE + SYSMOD_VDAC_CONFIG, - .end = DAVINCI_SYSTEM_MODULE_BASE + SYSMOD_VDAC_CONFIG + 3, - .flags = IORESOURCE_MEM, - }, -}; - -static struct resource dm355_v4l2_disp_resources[] = { - { - .start = DAVINCI_INTC_IRQ(IRQ_VENCINT), - .end = DAVINCI_INTC_IRQ(IRQ_VENCINT), - .flags = IORESOURCE_IRQ, - }, - /* venc registers io space */ - { - .start = DM355_VENC_BASE, - .end = DM355_VENC_BASE + 0x17f, - .flags = IORESOURCE_MEM, - }, -}; - -static int dm355_vpbe_setup_pinmux(u32 if_type, int field) -{ - switch (if_type) { - case MEDIA_BUS_FMT_SGRBG8_1X8: - davinci_cfg_reg(DM355_VOUT_FIELD_G70); - break; - case MEDIA_BUS_FMT_YUYV10_1X20: - if (field) - davinci_cfg_reg(DM355_VOUT_FIELD); - else - davinci_cfg_reg(DM355_VOUT_FIELD_G70); - break; - default: - return -EINVAL; - } - - davinci_cfg_reg(DM355_VOUT_COUTL_EN); - davinci_cfg_reg(DM355_VOUT_COUTH_EN); - - return 0; -} - -static int dm355_venc_setup_clock(enum vpbe_enc_timings_type type, - unsigned int pclock) -{ - void __iomem *vpss_clk_ctrl_reg; - - vpss_clk_ctrl_reg = DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL); - - switch (type) { - case VPBE_ENC_STD: - writel(VPSS_DACCLKEN_ENABLE | VPSS_VENCCLKEN_ENABLE, - vpss_clk_ctrl_reg); - break; - case VPBE_ENC_DV_TIMINGS: - if (pclock > 27000000) - /* - * For HD, use external clock source since we cannot - * support HD mode with internal clocks. - */ - writel(VPSS_MUXSEL_EXTCLK_ENABLE, vpss_clk_ctrl_reg); - break; - default: - return -EINVAL; - } - - return 0; -} - -static struct platform_device dm355_vpbe_display = { - .name = "vpbe-v4l2", - .id = -1, - .num_resources = ARRAY_SIZE(dm355_v4l2_disp_resources), - .resource = dm355_v4l2_disp_resources, - .dev = { - .dma_mask = &vpfe_capture_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -static struct venc_platform_data dm355_venc_pdata = { - .setup_pinmux = dm355_vpbe_setup_pinmux, - .setup_clock = dm355_venc_setup_clock, -}; - -static struct platform_device dm355_venc_dev = { - .name = DM355_VPBE_VENC_SUBDEV_NAME, - .id = -1, - .num_resources = ARRAY_SIZE(dm355_venc_resources), - .resource = dm355_venc_resources, - .dev = { - .dma_mask = &vpfe_capture_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = (void *)&dm355_venc_pdata, - }, -}; - -static struct platform_device dm355_vpbe_dev = { - .name = "vpbe_controller", - .id = -1, - .dev = { - .dma_mask = &vpfe_capture_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -static struct resource dm355_gpio_resources[] = { - { /* registers */ - .start = DAVINCI_GPIO_BASE, - .end = DAVINCI_GPIO_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - { /* interrupt */ - .start = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK0), - .end = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK0), - .flags = IORESOURCE_IRQ, - }, - { - .start = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK1), - .end = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK1), - .flags = IORESOURCE_IRQ, - }, - { - .start = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK2), - .end = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK2), - .flags = IORESOURCE_IRQ, - }, - { - .start = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK3), - .end = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK3), - .flags = IORESOURCE_IRQ, - }, - { - .start = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK4), - .end = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK4), - .flags = IORESOURCE_IRQ, - }, - { - .start = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK5), - .end = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK5), - .flags = IORESOURCE_IRQ, - }, - { - .start = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK6), - .end = DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK6), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct davinci_gpio_platform_data dm355_gpio_platform_data = { - .no_auto_base = true, - .base = 0, - .ngpio = 104, -}; - -int __init dm355_gpio_register(void) -{ - return davinci_gpio_register(dm355_gpio_resources, - ARRAY_SIZE(dm355_gpio_resources), - &dm355_gpio_platform_data); -} -/*----------------------------------------------------------------------*/ - -static struct map_desc dm355_io_desc[] = { - { - .virtual = IO_VIRT, - .pfn = __phys_to_pfn(IO_PHYS), - .length = IO_SIZE, - .type = MT_DEVICE - }, -}; - -/* Contents of JTAG ID register used to identify exact cpu type */ -static struct davinci_id dm355_ids[] = { - { - .variant = 0x0, - .part_no = 0xb73b, - .manufacturer = 0x00f, - .cpu_id = DAVINCI_CPU_ID_DM355, - .name = "dm355", - }, -}; - -/* - * Bottom half of timer0 is used for clockevent, top half is used for - * clocksource. - */ -static const struct davinci_timer_cfg dm355_timer_cfg = { - .reg = DEFINE_RES_IO(DAVINCI_TIMER0_BASE, SZ_4K), - .irq = { - DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT12)), - DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT34)), - }, -}; - -static struct plat_serial8250_port dm355_serial0_platform_data[] = { - { - .mapbase = DAVINCI_UART0_BASE, - .irq = DAVINCI_INTC_IRQ(IRQ_UARTINT0), - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | - UPF_IOREMAP, - .iotype = UPIO_MEM, - .regshift = 2, - }, - { - .flags = 0, - } -}; -static struct plat_serial8250_port dm355_serial1_platform_data[] = { - { - .mapbase = DAVINCI_UART1_BASE, - .irq = DAVINCI_INTC_IRQ(IRQ_UARTINT1), - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | - UPF_IOREMAP, - .iotype = UPIO_MEM, - .regshift = 2, - }, - { - .flags = 0, - } -}; -static struct plat_serial8250_port dm355_serial2_platform_data[] = { - { - .mapbase = DM355_UART2_BASE, - .irq = DAVINCI_INTC_IRQ(IRQ_DM355_UARTINT2), - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | - UPF_IOREMAP, - .iotype = UPIO_MEM, - .regshift = 2, - }, - { - .flags = 0, - } -}; - -struct platform_device dm355_serial_device[] = { - { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = dm355_serial0_platform_data, - } - }, - { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM1, - .dev = { - .platform_data = dm355_serial1_platform_data, - } - }, - { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM2, - .dev = { - .platform_data = dm355_serial2_platform_data, - } - }, - { - } -}; - -static const struct davinci_soc_info davinci_soc_info_dm355 = { - .io_desc = dm355_io_desc, - .io_desc_num = ARRAY_SIZE(dm355_io_desc), - .jtag_id_reg = 0x01c40028, - .ids = dm355_ids, - .ids_num = ARRAY_SIZE(dm355_ids), - .pinmux_base = DAVINCI_SYSTEM_MODULE_BASE, - .pinmux_pins = dm355_pins, - .pinmux_pins_num = ARRAY_SIZE(dm355_pins), - .sram_dma = 0x00010000, - .sram_len = SZ_32K, -}; - -void __init dm355_init_asp1(u32 evt_enable) -{ - /* we don't use ASP1 IRQs, or we'd need to mux them ... */ - if (evt_enable & ASP1_TX_EVT_EN) - davinci_cfg_reg(DM355_EVT8_ASP1_TX); - - if (evt_enable & ASP1_RX_EVT_EN) - davinci_cfg_reg(DM355_EVT9_ASP1_RX); - - platform_device_register(&dm355_asp1_device); -} - -void __init dm355_init(void) -{ - davinci_common_init(&davinci_soc_info_dm355); - davinci_map_sysmod(); -} - -void __init dm355_init_time(void) -{ - void __iomem *pll1, *psc; - struct clk *clk; - int rv; - - clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DM355_REF_FREQ); - - pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_1K); - dm355_pll1_init(NULL, pll1, NULL); - - psc = ioremap(DAVINCI_PWR_SLEEP_CNTRL_BASE, SZ_4K); - dm355_psc_init(NULL, psc); - - clk = clk_get(NULL, "timer0"); - if (WARN_ON(IS_ERR(clk))) { - pr_err("Unable to get the timer clock\n"); - return; - } - - rv = davinci_timer_register(clk, &dm355_timer_cfg); - WARN(rv, "Unable to register the timer: %d\n", rv); -} - -static struct resource dm355_pll2_resources[] = { - { - .start = DAVINCI_PLL2_BASE, - .end = DAVINCI_PLL2_BASE + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device dm355_pll2_device = { - .name = "dm355-pll2", - .id = -1, - .resource = dm355_pll2_resources, - .num_resources = ARRAY_SIZE(dm355_pll2_resources), -}; - -void __init dm355_register_clocks(void) -{ - /* PLL1 and PSC are registered in dm355_init_time() */ - platform_device_register(&dm355_pll2_device); -} - -int __init dm355_init_video(struct vpfe_config *vpfe_cfg, - struct vpbe_config *vpbe_cfg) -{ - if (vpfe_cfg || vpbe_cfg) - platform_device_register(&dm355_vpss_device); - - if (vpfe_cfg) { - vpfe_capture_dev.dev.platform_data = vpfe_cfg; - platform_device_register(&dm355_ccdc_dev); - platform_device_register(&vpfe_capture_dev); - } - - if (vpbe_cfg) { - dm355_vpbe_dev.dev.platform_data = vpbe_cfg; - platform_device_register(&dm355_osd_dev); - platform_device_register(&dm355_venc_dev); - platform_device_register(&dm355_vpbe_dev); - platform_device_register(&dm355_vpbe_display); - } - - return 0; -} - -static const struct davinci_aintc_config dm355_aintc_config = { - .reg = { - .start = DAVINCI_ARM_INTC_BASE, - .end = DAVINCI_ARM_INTC_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .num_irqs = 64, - .prios = dm355_default_priorities, -}; - -void __init dm355_init_irq(void) -{ - davinci_aintc_init(&dm355_aintc_config); -} - -static int __init dm355_init_devices(void) -{ - struct platform_device *edma_pdev; - int ret = 0; - - if (!cpu_is_davinci_dm355()) - return 0; - - davinci_cfg_reg(DM355_INT_EDMA_CC); - edma_pdev = platform_device_register_full(&dm355_edma_device); - if (IS_ERR(edma_pdev)) { - pr_warn("%s: Failed to register eDMA\n", __func__); - return PTR_ERR(edma_pdev); - } - - ret = davinci_init_wdt(); - if (ret) - pr_warn("%s: watchdog init failed: %d\n", __func__, ret); - - return ret; -} -postcore_initcall(dm355_init_devices); diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c deleted file mode 100644 index 7538bb87f373..000000000000 --- a/arch/arm/mach-davinci/dm365.c +++ /dev/null @@ -1,1094 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * TI DaVinci DM365 chip specific setup - * - * Copyright (C) 2009 Texas Instruments - */ - -#include <linux/clk-provider.h> -#include <linux/clk/davinci.h> -#include <linux/clkdev.h> -#include <linux/dma-mapping.h> -#include <linux/dmaengine.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/irqchip/irq-davinci-aintc.h> -#include <linux/platform_data/edma.h> -#include <linux/platform_data/gpio-davinci.h> -#include <linux/platform_data/keyscan-davinci.h> -#include <linux/platform_data/spi-davinci.h> -#include <linux/platform_device.h> -#include <linux/serial_8250.h> -#include <linux/spi/spi.h> - -#include <clocksource/timer-davinci.h> - -#include <asm/mach/map.h> - -#include "common.h" -#include "cputype.h" -#include "serial.h" -#include "asp.h" -#include "davinci.h" -#include "irqs.h" -#include "mux.h" - -#define DM365_REF_FREQ 24000000 /* 24 MHz on the DM365 EVM */ -#define DM365_RTC_BASE 0x01c69000 -#define DM365_KEYSCAN_BASE 0x01c69400 -#define DM365_OSD_BASE 0x01c71c00 -#define DM365_VENC_BASE 0x01c71e00 -#define DAVINCI_DM365_VC_BASE 0x01d0c000 -#define DAVINCI_DMA_VC_TX 2 -#define DAVINCI_DMA_VC_RX 3 -#define DM365_EMAC_BASE 0x01d07000 -#define DM365_EMAC_MDIO_BASE (DM365_EMAC_BASE + 0x4000) -#define DM365_EMAC_CNTRL_OFFSET 0x0000 -#define DM365_EMAC_CNTRL_MOD_OFFSET 0x3000 -#define DM365_EMAC_CNTRL_RAM_OFFSET 0x1000 -#define DM365_EMAC_CNTRL_RAM_SIZE 0x2000 - -#define INTMUX 0x18 -#define EVTMUX 0x1c - - -static const struct mux_config dm365_pins[] = { -#ifdef CONFIG_DAVINCI_MUX -MUX_CFG(DM365, MMCSD0, 0, 24, 1, 0, false) - -MUX_CFG(DM365, SD1_CLK, 0, 16, 3, 1, false) -MUX_CFG(DM365, SD1_CMD, 4, 30, 3, 1, false) -MUX_CFG(DM365, SD1_DATA3, 4, 28, 3, 1, false) -MUX_CFG(DM365, SD1_DATA2, 4, 26, 3, 1, false) -MUX_CFG(DM365, SD1_DATA1, 4, 24, 3, 1, false) -MUX_CFG(DM365, SD1_DATA0, 4, 22, 3, 1, false) - -MUX_CFG(DM365, I2C_SDA, 3, 23, 3, 2, false) -MUX_CFG(DM365, I2C_SCL, 3, 21, 3, 2, false) - -MUX_CFG(DM365, AEMIF_AR_A14, 2, 0, 3, 1, false) -MUX_CFG(DM365, AEMIF_AR_BA0, 2, 0, 3, 2, false) -MUX_CFG(DM365, AEMIF_A3, 2, 2, 3, 1, false) -MUX_CFG(DM365, AEMIF_A7, 2, 4, 3, 1, false) -MUX_CFG(DM365, AEMIF_D15_8, 2, 6, 1, 1, false) -MUX_CFG(DM365, AEMIF_CE0, 2, 7, 1, 0, false) -MUX_CFG(DM365, AEMIF_CE1, 2, 8, 1, 0, false) -MUX_CFG(DM365, AEMIF_WE_OE, 2, 9, 1, 0, false) - -MUX_CFG(DM365, MCBSP0_BDX, 0, 23, 1, 1, false) -MUX_CFG(DM365, MCBSP0_X, 0, 22, 1, 1, false) -MUX_CFG(DM365, MCBSP0_BFSX, 0, 21, 1, 1, false) -MUX_CFG(DM365, MCBSP0_BDR, 0, 20, 1, 1, false) -MUX_CFG(DM365, MCBSP0_R, 0, 19, 1, 1, false) -MUX_CFG(DM365, MCBSP0_BFSR, 0, 18, 1, 1, false) - -MUX_CFG(DM365, SPI0_SCLK, 3, 28, 1, 1, false) -MUX_CFG(DM365, SPI0_SDI, 3, 26, 3, 1, false) -MUX_CFG(DM365, SPI0_SDO, 3, 25, 1, 1, false) -MUX_CFG(DM365, SPI0_SDENA0, 3, 29, 3, 1, false) -MUX_CFG(DM365, SPI0_SDENA1, 3, 26, 3, 2, false) - -MUX_CFG(DM365, UART0_RXD, 3, 20, 1, 1, false) -MUX_CFG(DM365, UART0_TXD, 3, 19, 1, 1, false) -MUX_CFG(DM365, UART1_RXD, 3, 17, 3, 2, false) -MUX_CFG(DM365, UART1_TXD, 3, 15, 3, 2, false) -MUX_CFG(DM365, UART1_RTS, 3, 23, 3, 1, false) -MUX_CFG(DM365, UART1_CTS, 3, 21, 3, 1, false) - -MUX_CFG(DM365, EMAC_TX_EN, 3, 17, 3, 1, false) -MUX_CFG(DM365, EMAC_TX_CLK, 3, 15, 3, 1, false) -MUX_CFG(DM365, EMAC_COL, 3, 14, 1, 1, false) -MUX_CFG(DM365, EMAC_TXD3, 3, 13, 1, 1, false) -MUX_CFG(DM365, EMAC_TXD2, 3, 12, 1, 1, false) -MUX_CFG(DM365, EMAC_TXD1, 3, 11, 1, 1, false) -MUX_CFG(DM365, EMAC_TXD0, 3, 10, 1, 1, false) -MUX_CFG(DM365, EMAC_RXD3, 3, 9, 1, 1, false) -MUX_CFG(DM365, EMAC_RXD2, 3, 8, 1, 1, false) -MUX_CFG(DM365, EMAC_RXD1, 3, 7, 1, 1, false) -MUX_CFG(DM365, EMAC_RXD0, 3, 6, 1, 1, false) -MUX_CFG(DM365, EMAC_RX_CLK, 3, 5, 1, 1, false) -MUX_CFG(DM365, EMAC_RX_DV, 3, 4, 1, 1, false) -MUX_CFG(DM365, EMAC_RX_ER, 3, 3, 1, 1, false) -MUX_CFG(DM365, EMAC_CRS, 3, 2, 1, 1, false) -MUX_CFG(DM365, EMAC_MDIO, 3, 1, 1, 1, false) -MUX_CFG(DM365, EMAC_MDCLK, 3, 0, 1, 1, false) - -MUX_CFG(DM365, KEYSCAN, 2, 0, 0x3f, 0x3f, false) - -MUX_CFG(DM365, PWM0, 1, 0, 3, 2, false) -MUX_CFG(DM365, PWM0_G23, 3, 26, 3, 3, false) -MUX_CFG(DM365, PWM1, 1, 2, 3, 2, false) -MUX_CFG(DM365, PWM1_G25, 3, 29, 3, 2, false) -MUX_CFG(DM365, PWM2_G87, 1, 10, 3, 2, false) -MUX_CFG(DM365, PWM2_G88, 1, 8, 3, 2, false) -MUX_CFG(DM365, PWM2_G89, 1, 6, 3, 2, false) -MUX_CFG(DM365, PWM2_G90, 1, 4, 3, 2, false) -MUX_CFG(DM365, PWM3_G80, 1, 20, 3, 3, false) -MUX_CFG(DM365, PWM3_G81, 1, 18, 3, 3, false) -MUX_CFG(DM365, PWM3_G85, 1, 14, 3, 2, false) -MUX_CFG(DM365, PWM3_G86, 1, 12, 3, 2, false) - -MUX_CFG(DM365, SPI1_SCLK, 4, 2, 3, 1, false) -MUX_CFG(DM365, SPI1_SDI, 3, 31, 1, 1, false) -MUX_CFG(DM365, SPI1_SDO, 4, 0, 3, 1, false) -MUX_CFG(DM365, SPI1_SDENA0, 4, 4, 3, 1, false) -MUX_CFG(DM365, SPI1_SDENA1, 4, 0, 3, 2, false) - -MUX_CFG(DM365, SPI2_SCLK, 4, 10, 3, 1, false) -MUX_CFG(DM365, SPI2_SDI, 4, 6, 3, 1, false) -MUX_CFG(DM365, SPI2_SDO, 4, 8, 3, 1, false) -MUX_CFG(DM365, SPI2_SDENA0, 4, 12, 3, 1, false) -MUX_CFG(DM365, SPI2_SDENA1, 4, 8, 3, 2, false) - -MUX_CFG(DM365, SPI3_SCLK, 0, 0, 3, 2, false) -MUX_CFG(DM365, SPI3_SDI, 0, 2, 3, 2, false) -MUX_CFG(DM365, SPI3_SDO, 0, 6, 3, 2, false) -MUX_CFG(DM365, SPI3_SDENA0, 0, 4, 3, 2, false) -MUX_CFG(DM365, SPI3_SDENA1, 0, 6, 3, 3, false) - -MUX_CFG(DM365, SPI4_SCLK, 4, 18, 3, 1, false) -MUX_CFG(DM365, SPI4_SDI, 4, 14, 3, 1, false) -MUX_CFG(DM365, SPI4_SDO, 4, 16, 3, 1, false) -MUX_CFG(DM365, SPI4_SDENA0, 4, 20, 3, 1, false) -MUX_CFG(DM365, SPI4_SDENA1, 4, 16, 3, 2, false) - -MUX_CFG(DM365, CLKOUT0, 4, 20, 3, 3, false) -MUX_CFG(DM365, CLKOUT1, 4, 16, 3, 3, false) -MUX_CFG(DM365, CLKOUT2, 4, 8, 3, 3, false) - -MUX_CFG(DM365, GPIO20, 3, 21, 3, 0, false) -MUX_CFG(DM365, GPIO30, 4, 6, 3, 0, false) -MUX_CFG(DM365, GPIO31, 4, 8, 3, 0, false) -MUX_CFG(DM365, GPIO32, 4, 10, 3, 0, false) -MUX_CFG(DM365, GPIO33, 4, 12, 3, 0, false) -MUX_CFG(DM365, GPIO40, 4, 26, 3, 0, false) -MUX_CFG(DM365, GPIO64_57, 2, 6, 1, 0, false) - -MUX_CFG(DM365, VOUT_FIELD, 1, 18, 3, 1, false) -MUX_CFG(DM365, VOUT_FIELD_G81, 1, 18, 3, 0, false) -MUX_CFG(DM365, VOUT_HVSYNC, 1, 16, 1, 0, false) -MUX_CFG(DM365, VOUT_COUTL_EN, 1, 0, 0xff, 0x55, false) -MUX_CFG(DM365, VOUT_COUTH_EN, 1, 8, 0xff, 0x55, false) -MUX_CFG(DM365, VIN_CAM_WEN, 0, 14, 3, 0, false) -MUX_CFG(DM365, VIN_CAM_VD, 0, 13, 1, 0, false) -MUX_CFG(DM365, VIN_CAM_HD, 0, 12, 1, 0, false) -MUX_CFG(DM365, VIN_YIN4_7_EN, 0, 0, 0xff, 0, false) -MUX_CFG(DM365, VIN_YIN0_3_EN, 0, 8, 0xf, 0, false) - -INT_CFG(DM365, INT_EDMA_CC, 2, 1, 1, false) -INT_CFG(DM365, INT_EDMA_TC0_ERR, 3, 1, 1, false) -INT_CFG(DM365, INT_EDMA_TC1_ERR, 4, 1, 1, false) -INT_CFG(DM365, INT_EDMA_TC2_ERR, 22, 1, 1, false) -INT_CFG(DM365, INT_EDMA_TC3_ERR, 23, 1, 1, false) -INT_CFG(DM365, INT_PRTCSS, 10, 1, 1, false) -INT_CFG(DM365, INT_EMAC_RXTHRESH, 14, 1, 1, false) -INT_CFG(DM365, INT_EMAC_RXPULSE, 15, 1, 1, false) -INT_CFG(DM365, INT_EMAC_TXPULSE, 16, 1, 1, false) -INT_CFG(DM365, INT_EMAC_MISCPULSE, 17, 1, 1, false) -INT_CFG(DM365, INT_IMX0_ENABLE, 0, 1, 0, false) -INT_CFG(DM365, INT_IMX0_DISABLE, 0, 1, 1, false) -INT_CFG(DM365, INT_HDVICP_ENABLE, 0, 1, 1, false) -INT_CFG(DM365, INT_HDVICP_DISABLE, 0, 1, 0, false) -INT_CFG(DM365, INT_IMX1_ENABLE, 24, 1, 1, false) -INT_CFG(DM365, INT_IMX1_DISABLE, 24, 1, 0, false) -INT_CFG(DM365, INT_NSF_ENABLE, 25, 1, 1, false) -INT_CFG(DM365, INT_NSF_DISABLE, 25, 1, 0, false) - -EVT_CFG(DM365, EVT2_ASP_TX, 0, 1, 0, false) -EVT_CFG(DM365, EVT3_ASP_RX, 1, 1, 0, false) -EVT_CFG(DM365, EVT2_VC_TX, 0, 1, 1, false) -EVT_CFG(DM365, EVT3_VC_RX, 1, 1, 1, false) -#endif -}; - -static u64 dm365_spi0_dma_mask = DMA_BIT_MASK(32); - -static struct davinci_spi_platform_data dm365_spi0_pdata = { - .version = SPI_VERSION_1, - .num_chipselect = 2, - .dma_event_q = EVENTQ_3, - .prescaler_limit = 1, -}; - -static struct resource dm365_spi0_resources[] = { - { - .start = 0x01c66000, - .end = 0x01c667ff, - .flags = IORESOURCE_MEM, - }, - { - .start = DAVINCI_INTC_IRQ(IRQ_DM365_SPIINT0_0), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device dm365_spi0_device = { - .name = "spi_davinci", - .id = 0, - .dev = { - .dma_mask = &dm365_spi0_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &dm365_spi0_pdata, - }, - .num_resources = ARRAY_SIZE(dm365_spi0_resources), - .resource = dm365_spi0_resources, -}; - -void __init dm365_init_spi0(unsigned chipselect_mask, - const struct spi_board_info *info, unsigned len) -{ - davinci_cfg_reg(DM365_SPI0_SCLK); - davinci_cfg_reg(DM365_SPI0_SDI); - davinci_cfg_reg(DM365_SPI0_SDO); - - /* not all slaves will be wired up */ - if (chipselect_mask & BIT(0)) - davinci_cfg_reg(DM365_SPI0_SDENA0); - if (chipselect_mask & BIT(1)) - davinci_cfg_reg(DM365_SPI0_SDENA1); - - spi_register_board_info(info, len); - - platform_device_register(&dm365_spi0_device); -} - -static struct resource dm365_gpio_resources[] = { - { /* registers */ - .start = DAVINCI_GPIO_BASE, - .end = DAVINCI_GPIO_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - { /* interrupt */ - .start = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO0), - .end = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO0), - .flags = IORESOURCE_IRQ, - }, - { - .start = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO1), - .end = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO1), - .flags = IORESOURCE_IRQ, - }, - { - .start = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO2), - .end = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO2), - .flags = IORESOURCE_IRQ, - }, - { - .start = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO3), - .end = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO3), - .flags = IORESOURCE_IRQ, - }, - { - .start = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO4), - .end = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO4), - .flags = IORESOURCE_IRQ, - }, - { - .start = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO5), - .end = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO5), - .flags = IORESOURCE_IRQ, - }, - { - .start = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO6), - .end = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO6), - .flags = IORESOURCE_IRQ, - }, - { - .start = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO7), - .end = DAVINCI_INTC_IRQ(IRQ_DM365_GPIO7), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct davinci_gpio_platform_data dm365_gpio_platform_data = { - .no_auto_base = true, - .base = 0, - .ngpio = 104, - .gpio_unbanked = 8, -}; - -int __init dm365_gpio_register(void) -{ - return davinci_gpio_register(dm365_gpio_resources, - ARRAY_SIZE(dm365_gpio_resources), - &dm365_gpio_platform_data); -} - -static struct emac_platform_data dm365_emac_pdata = { - .ctrl_reg_offset = DM365_EMAC_CNTRL_OFFSET, - .ctrl_mod_reg_offset = DM365_EMAC_CNTRL_MOD_OFFSET, - .ctrl_ram_offset = DM365_EMAC_CNTRL_RAM_OFFSET, - .ctrl_ram_size = DM365_EMAC_CNTRL_RAM_SIZE, - .version = EMAC_VERSION_2, -}; - -static struct resource dm365_emac_resources[] = { - { - .start = DM365_EMAC_BASE, - .end = DM365_EMAC_BASE + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_RXTHRESH), - .end = DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_RXTHRESH), - .flags = IORESOURCE_IRQ, - }, - { - .start = DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_RXPULSE), - .end = DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_RXPULSE), - .flags = IORESOURCE_IRQ, - }, - { - .start = DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_TXPULSE), - .end = DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_TXPULSE), - .flags = IORESOURCE_IRQ, - }, - { - .start = DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_MISCPULSE), - .end = DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_MISCPULSE), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device dm365_emac_device = { - .name = "davinci_emac", - .id = 1, - .dev = { - .platform_data = &dm365_emac_pdata, - }, - .num_resources = ARRAY_SIZE(dm365_emac_resources), - .resource = dm365_emac_resources, -}; - -static struct resource dm365_mdio_resources[] = { - { - .start = DM365_EMAC_MDIO_BASE, - .end = DM365_EMAC_MDIO_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device dm365_mdio_device = { - .name = "davinci_mdio", - .id = 0, - .num_resources = ARRAY_SIZE(dm365_mdio_resources), - .resource = dm365_mdio_resources, -}; - -static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = { - [IRQ_VDINT0] = 2, - [IRQ_VDINT1] = 6, - [IRQ_VDINT2] = 6, - [IRQ_HISTINT] = 6, - [IRQ_H3AINT] = 6, - [IRQ_PRVUINT] = 6, - [IRQ_RSZINT] = 6, - [IRQ_DM365_INSFINT] = 7, - [IRQ_VENCINT] = 6, - [IRQ_ASQINT] = 6, - [IRQ_IMXINT] = 6, - [IRQ_DM365_IMCOPINT] = 4, - [IRQ_USBINT] = 4, - [IRQ_DM365_RTOINT] = 7, - [IRQ_DM365_TINT5] = 7, - [IRQ_DM365_TINT6] = 5, - [IRQ_CCINT0] = 5, - [IRQ_CCERRINT] = 5, - [IRQ_TCERRINT0] = 5, - [IRQ_TCERRINT] = 7, - [IRQ_PSCIN] = 4, - [IRQ_DM365_SPINT2_1] = 7, - [IRQ_DM365_TINT7] = 7, - [IRQ_DM365_SDIOINT0] = 7, - [IRQ_MBXINT] = 7, - [IRQ_MBRINT] = 7, - [IRQ_MMCINT] = 7, - [IRQ_DM365_MMCINT1] = 7, - [IRQ_DM365_PWMINT3] = 7, - [IRQ_AEMIFINT] = 2, - [IRQ_DM365_SDIOINT1] = 2, - [IRQ_TINT0_TINT12] = 7, - [IRQ_TINT0_TINT34] = 7, - [IRQ_TINT1_TINT12] = 7, - [IRQ_TINT1_TINT34] = 7, - [IRQ_PWMINT0] = 7, - [IRQ_PWMINT1] = 3, - [IRQ_PWMINT2] = 3, - [IRQ_I2C] = 3, - [IRQ_UARTINT0] = 3, - [IRQ_UARTINT1] = 3, - [IRQ_DM365_RTCINT] = 3, - [IRQ_DM365_SPIINT0_0] = 3, - [IRQ_DM365_SPIINT3_0] = 3, - [IRQ_DM365_GPIO0] = 3, - [IRQ_DM365_GPIO1] = 7, - [IRQ_DM365_GPIO2] = 4, - [IRQ_DM365_GPIO3] = 4, - [IRQ_DM365_GPIO4] = 7, - [IRQ_DM365_GPIO5] = 7, - [IRQ_DM365_GPIO6] = 7, - [IRQ_DM365_GPIO7] = 7, - [IRQ_DM365_EMAC_RXTHRESH] = 7, - [IRQ_DM365_EMAC_RXPULSE] = 7, - [IRQ_DM365_EMAC_TXPULSE] = 7, - [IRQ_DM365_EMAC_MISCPULSE] = 7, - [IRQ_DM365_GPIO12] = 7, - [IRQ_DM365_GPIO13] = 7, - [IRQ_DM365_GPIO14] = 7, - [IRQ_DM365_GPIO15] = 7, - [IRQ_DM365_KEYINT] = 7, - [IRQ_DM365_TCERRINT2] = 7, - [IRQ_DM365_TCERRINT3] = 7, - [IRQ_DM365_EMUINT] = 7, -}; - -/* Four Transfer Controllers on DM365 */ -static s8 dm365_queue_priority_mapping[][2] = { - /* {event queue no, Priority} */ - {0, 7}, - {1, 7}, - {2, 7}, - {3, 0}, - {-1, -1}, -}; - -static const struct dma_slave_map dm365_edma_map[] = { - { "davinci-mcbsp", "tx", EDMA_FILTER_PARAM(0, 2) }, - { "davinci-mcbsp", "rx", EDMA_FILTER_PARAM(0, 3) }, - { "davinci_voicecodec", "tx", EDMA_FILTER_PARAM(0, 2) }, - { "davinci_voicecodec", "rx", EDMA_FILTER_PARAM(0, 3) }, - { "spi_davinci.2", "tx", EDMA_FILTER_PARAM(0, 10) }, - { "spi_davinci.2", "rx", EDMA_FILTER_PARAM(0, 11) }, - { "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 14) }, - { "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 15) }, - { "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 16) }, - { "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 17) }, - { "spi_davinci.3", "tx", EDMA_FILTER_PARAM(0, 18) }, - { "spi_davinci.3", "rx", EDMA_FILTER_PARAM(0, 19) }, - { "da830-mmc.0", "rx", EDMA_FILTER_PARAM(0, 26) }, - { "da830-mmc.0", "tx", EDMA_FILTER_PARAM(0, 27) }, - { "da830-mmc.1", "rx", EDMA_FILTER_PARAM(0, 30) }, - { "da830-mmc.1", "tx", EDMA_FILTER_PARAM(0, 31) }, -}; - -static struct edma_soc_info dm365_edma_pdata = { - .queue_priority_mapping = dm365_queue_priority_mapping, - .default_queue = EVENTQ_3, - .slave_map = dm365_edma_map, - .slavecnt = ARRAY_SIZE(dm365_edma_map), -}; - -static struct resource edma_resources[] = { - { - .name = "edma3_cc", - .start = 0x01c00000, - .end = 0x01c00000 + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "edma3_tc0", - .start = 0x01c10000, - .end = 0x01c10000 + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "edma3_tc1", - .start = 0x01c10400, - .end = 0x01c10400 + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "edma3_tc2", - .start = 0x01c10800, - .end = 0x01c10800 + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "edma3_tc3", - .start = 0x01c10c00, - .end = 0x01c10c00 + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "edma3_ccint", - .start = DAVINCI_INTC_IRQ(IRQ_CCINT0), - .flags = IORESOURCE_IRQ, - }, - { - .name = "edma3_ccerrint", - .start = DAVINCI_INTC_IRQ(IRQ_CCERRINT), - .flags = IORESOURCE_IRQ, - }, - /* not using TC*_ERR */ -}; - -static const struct platform_device_info dm365_edma_device __initconst = { - .name = "edma", - .id = 0, - .dma_mask = DMA_BIT_MASK(32), - .res = edma_resources, - .num_res = ARRAY_SIZE(edma_resources), - .data = &dm365_edma_pdata, - .size_data = sizeof(dm365_edma_pdata), -}; - -static struct resource dm365_asp_resources[] = { - { - .name = "mpu", - .start = DAVINCI_DM365_ASP0_BASE, - .end = DAVINCI_DM365_ASP0_BASE + SZ_8K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = DAVINCI_DMA_ASP0_TX, - .end = DAVINCI_DMA_ASP0_TX, - .flags = IORESOURCE_DMA, - }, - { - .start = DAVINCI_DMA_ASP0_RX, - .end = DAVINCI_DMA_ASP0_RX, - .flags = IORESOURCE_DMA, - }, -}; - -static struct platform_device dm365_asp_device = { - .name = "davinci-mcbsp", - .id = -1, - .num_resources = ARRAY_SIZE(dm365_asp_resources), - .resource = dm365_asp_resources, -}; - -static struct resource dm365_vc_resources[] = { - { - .start = DAVINCI_DM365_VC_BASE, - .end = DAVINCI_DM365_VC_BASE + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = DAVINCI_DMA_VC_TX, - .end = DAVINCI_DMA_VC_TX, - .flags = IORESOURCE_DMA, - }, - { - .start = DAVINCI_DMA_VC_RX, - .end = DAVINCI_DMA_VC_RX, - .flags = IORESOURCE_DMA, - }, -}; - -static struct platform_device dm365_vc_device = { - .name = "davinci_voicecodec", - .id = -1, - .num_resources = ARRAY_SIZE(dm365_vc_resources), - .resource = dm365_vc_resources, -}; - -static struct resource dm365_rtc_resources[] = { - { - .start = DM365_RTC_BASE, - .end = DM365_RTC_BASE + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = DAVINCI_INTC_IRQ(IRQ_DM365_RTCINT), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device dm365_rtc_device = { - .name = "rtc_davinci", - .id = 0, - .num_resources = ARRAY_SIZE(dm365_rtc_resources), - .resource = dm365_rtc_resources, -}; - -static struct map_desc dm365_io_desc[] = { - { - .virtual = IO_VIRT, - .pfn = __phys_to_pfn(IO_PHYS), - .length = IO_SIZE, - .type = MT_DEVICE - }, -}; - -static struct resource dm365_ks_resources[] = { - { - /* registers */ - .start = DM365_KEYSCAN_BASE, - .end = DM365_KEYSCAN_BASE + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - { - /* interrupt */ - .start = DAVINCI_INTC_IRQ(IRQ_DM365_KEYINT), - .end = DAVINCI_INTC_IRQ(IRQ_DM365_KEYINT), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device dm365_ks_device = { - .name = "davinci_keyscan", - .id = 0, - .num_resources = ARRAY_SIZE(dm365_ks_resources), - .resource = dm365_ks_resources, -}; - -/* Contents of JTAG ID register used to identify exact cpu type */ -static struct davinci_id dm365_ids[] = { - { - .variant = 0x0, - .part_no = 0xb83e, - .manufacturer = 0x017, - .cpu_id = DAVINCI_CPU_ID_DM365, - .name = "dm365_rev1.1", - }, - { - .variant = 0x8, - .part_no = 0xb83e, - .manufacturer = 0x017, - .cpu_id = DAVINCI_CPU_ID_DM365, - .name = "dm365_rev1.2", - }, -}; - -/* - * Bottom half of timer0 is used for clockevent, top half is used for - * clocksource. - */ -static const struct davinci_timer_cfg dm365_timer_cfg = { - .reg = DEFINE_RES_IO(DAVINCI_TIMER0_BASE, SZ_128), - .irq = { - DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT12)), - DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT34)), - }, -}; - -#define DM365_UART1_BASE (IO_PHYS + 0x106000) - -static struct plat_serial8250_port dm365_serial0_platform_data[] = { - { - .mapbase = DAVINCI_UART0_BASE, - .irq = DAVINCI_INTC_IRQ(IRQ_UARTINT0), - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | - UPF_IOREMAP, - .iotype = UPIO_MEM, - .regshift = 2, - }, - { - .flags = 0, - } -}; -static struct plat_serial8250_port dm365_serial1_platform_data[] = { - { - .mapbase = DM365_UART1_BASE, - .irq = DAVINCI_INTC_IRQ(IRQ_UARTINT1), - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | - UPF_IOREMAP, - .iotype = UPIO_MEM, - .regshift = 2, - }, - { - .flags = 0, - } -}; - -struct platform_device dm365_serial_device[] = { - { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = dm365_serial0_platform_data, - } - }, - { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM1, - .dev = { - .platform_data = dm365_serial1_platform_data, - } - }, - { - } -}; - -static const struct davinci_soc_info davinci_soc_info_dm365 = { - .io_desc = dm365_io_desc, - .io_desc_num = ARRAY_SIZE(dm365_io_desc), - .jtag_id_reg = 0x01c40028, - .ids = dm365_ids, - .ids_num = ARRAY_SIZE(dm365_ids), - .pinmux_base = DAVINCI_SYSTEM_MODULE_BASE, - .pinmux_pins = dm365_pins, - .pinmux_pins_num = ARRAY_SIZE(dm365_pins), - .emac_pdata = &dm365_emac_pdata, - .sram_dma = 0x00010000, - .sram_len = SZ_32K, -}; - -void __init dm365_init_asp(void) -{ - davinci_cfg_reg(DM365_MCBSP0_BDX); - davinci_cfg_reg(DM365_MCBSP0_X); - davinci_cfg_reg(DM365_MCBSP0_BFSX); - davinci_cfg_reg(DM365_MCBSP0_BDR); - davinci_cfg_reg(DM365_MCBSP0_R); - davinci_cfg_reg(DM365_MCBSP0_BFSR); - davinci_cfg_reg(DM365_EVT2_ASP_TX); - davinci_cfg_reg(DM365_EVT3_ASP_RX); - platform_device_register(&dm365_asp_device); -} - -void __init dm365_init_vc(void) -{ - davinci_cfg_reg(DM365_EVT2_VC_TX); - davinci_cfg_reg(DM365_EVT3_VC_RX); - platform_device_register(&dm365_vc_device); -} - -void __init dm365_init_ks(struct davinci_ks_platform_data *pdata) -{ - dm365_ks_device.dev.platform_data = pdata; - platform_device_register(&dm365_ks_device); -} - -void __init dm365_init_rtc(void) -{ - davinci_cfg_reg(DM365_INT_PRTCSS); - platform_device_register(&dm365_rtc_device); -} - -void __init dm365_init(void) -{ - davinci_common_init(&davinci_soc_info_dm365); - davinci_map_sysmod(); -} - -void __init dm365_init_time(void) -{ - void __iomem *pll1, *pll2, *psc; - struct clk *clk; - int rv; - - clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DM365_REF_FREQ); - - pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_1K); - dm365_pll1_init(NULL, pll1, NULL); - - pll2 = ioremap(DAVINCI_PLL2_BASE, SZ_1K); - dm365_pll2_init(NULL, pll2, NULL); - - psc = ioremap(DAVINCI_PWR_SLEEP_CNTRL_BASE, SZ_4K); - dm365_psc_init(NULL, psc); - - clk = clk_get(NULL, "timer0"); - if (WARN_ON(IS_ERR(clk))) { - pr_err("Unable to get the timer clock\n"); - return; - } - - rv = davinci_timer_register(clk, &dm365_timer_cfg); - WARN(rv, "Unable to register the timer: %d\n", rv); -} - -void __init dm365_register_clocks(void) -{ - /* all clocks are currently registered in dm365_init_time() */ -} - -static struct resource dm365_vpss_resources[] = { - { - /* VPSS ISP5 Base address */ - .name = "isp5", - .start = 0x01c70000, - .end = 0x01c70000 + 0xff, - .flags = IORESOURCE_MEM, - }, - { - /* VPSS CLK Base address */ - .name = "vpss", - .start = 0x01c70200, - .end = 0x01c70200 + 0xff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device dm365_vpss_device = { - .name = "vpss", - .id = -1, - .dev.platform_data = "dm365_vpss", - .num_resources = ARRAY_SIZE(dm365_vpss_resources), - .resource = dm365_vpss_resources, -}; - -static struct resource vpfe_resources[] = { - { - .start = DAVINCI_INTC_IRQ(IRQ_VDINT0), - .end = DAVINCI_INTC_IRQ(IRQ_VDINT0), - .flags = IORESOURCE_IRQ, - }, - { - .start = DAVINCI_INTC_IRQ(IRQ_VDINT1), - .end = DAVINCI_INTC_IRQ(IRQ_VDINT1), - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32); -static struct platform_device vpfe_capture_dev = { - .name = CAPTURE_DRV_NAME, - .id = -1, - .num_resources = ARRAY_SIZE(vpfe_resources), - .resource = vpfe_resources, - .dev = { - .dma_mask = &vpfe_capture_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -static void dm365_isif_setup_pinmux(void) -{ - davinci_cfg_reg(DM365_VIN_CAM_WEN); - davinci_cfg_reg(DM365_VIN_CAM_VD); - davinci_cfg_reg(DM365_VIN_CAM_HD); - davinci_cfg_reg(DM365_VIN_YIN4_7_EN); - davinci_cfg_reg(DM365_VIN_YIN0_3_EN); -} - -static struct resource isif_resource[] = { - /* ISIF Base address */ - { - .start = 0x01c71000, - .end = 0x01c71000 + 0x1ff, - .flags = IORESOURCE_MEM, - }, - /* ISIF Linearization table 0 */ - { - .start = 0x1C7C000, - .end = 0x1C7C000 + 0x2ff, - .flags = IORESOURCE_MEM, - }, - /* ISIF Linearization table 1 */ - { - .start = 0x1C7C400, - .end = 0x1C7C400 + 0x2ff, - .flags = IORESOURCE_MEM, - }, -}; -static struct platform_device dm365_isif_dev = { - .name = "isif", - .id = -1, - .num_resources = ARRAY_SIZE(isif_resource), - .resource = isif_resource, - .dev = { - .dma_mask = &vpfe_capture_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = dm365_isif_setup_pinmux, - }, -}; - -static struct resource dm365_osd_resources[] = { - { - .start = DM365_OSD_BASE, - .end = DM365_OSD_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, -}; - -static u64 dm365_video_dma_mask = DMA_BIT_MASK(32); - -static struct platform_device dm365_osd_dev = { - .name = DM365_VPBE_OSD_SUBDEV_NAME, - .id = -1, - .num_resources = ARRAY_SIZE(dm365_osd_resources), - .resource = dm365_osd_resources, - .dev = { - .dma_mask = &dm365_video_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -static struct resource dm365_venc_resources[] = { - { - .start = DAVINCI_INTC_IRQ(IRQ_VENCINT), - .end = DAVINCI_INTC_IRQ(IRQ_VENCINT), - .flags = IORESOURCE_IRQ, - }, - /* venc registers io space */ - { - .start = DM365_VENC_BASE, - .end = DM365_VENC_BASE + 0x177, - .flags = IORESOURCE_MEM, - }, - /* vdaccfg registers io space */ - { - .start = DAVINCI_SYSTEM_MODULE_BASE + SYSMOD_VDAC_CONFIG, - .end = DAVINCI_SYSTEM_MODULE_BASE + SYSMOD_VDAC_CONFIG + 3, - .flags = IORESOURCE_MEM, - }, -}; - -static struct resource dm365_v4l2_disp_resources[] = { - { - .start = DAVINCI_INTC_IRQ(IRQ_VENCINT), - .end = DAVINCI_INTC_IRQ(IRQ_VENCINT), - .flags = IORESOURCE_IRQ, - }, - /* venc registers io space */ - { - .start = DM365_VENC_BASE, - .end = DM365_VENC_BASE + 0x177, - .flags = IORESOURCE_MEM, - }, -}; - -static int dm365_vpbe_setup_pinmux(u32 if_type, int field) -{ - switch (if_type) { - case MEDIA_BUS_FMT_SGRBG8_1X8: - davinci_cfg_reg(DM365_VOUT_FIELD_G81); - davinci_cfg_reg(DM365_VOUT_COUTL_EN); - davinci_cfg_reg(DM365_VOUT_COUTH_EN); - break; - case MEDIA_BUS_FMT_YUYV10_1X20: - if (field) - davinci_cfg_reg(DM365_VOUT_FIELD); - else - davinci_cfg_reg(DM365_VOUT_FIELD_G81); - davinci_cfg_reg(DM365_VOUT_COUTL_EN); - davinci_cfg_reg(DM365_VOUT_COUTH_EN); - break; - default: - return -EINVAL; - } - - return 0; -} - -static int dm365_venc_setup_clock(enum vpbe_enc_timings_type type, - unsigned int pclock) -{ - void __iomem *vpss_clkctl_reg; - u32 val; - - vpss_clkctl_reg = DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL); - - switch (type) { - case VPBE_ENC_STD: - val = VPSS_VENCCLKEN_ENABLE | VPSS_DACCLKEN_ENABLE; - break; - case VPBE_ENC_DV_TIMINGS: - if (pclock <= 27000000) { - val = VPSS_VENCCLKEN_ENABLE | VPSS_DACCLKEN_ENABLE; - } else { - /* set sysclk4 to output 74.25 MHz from pll1 */ - val = VPSS_PLLC2SYSCLK5_ENABLE | VPSS_DACCLKEN_ENABLE | - VPSS_VENCCLKEN_ENABLE; - } - break; - default: - return -EINVAL; - } - writel(val, vpss_clkctl_reg); - - return 0; -} - -static struct platform_device dm365_vpbe_display = { - .name = "vpbe-v4l2", - .id = -1, - .num_resources = ARRAY_SIZE(dm365_v4l2_disp_resources), - .resource = dm365_v4l2_disp_resources, - .dev = { - .dma_mask = &dm365_video_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -static struct venc_platform_data dm365_venc_pdata = { - .setup_pinmux = dm365_vpbe_setup_pinmux, - .setup_clock = dm365_venc_setup_clock, -}; - -static struct platform_device dm365_venc_dev = { - .name = DM365_VPBE_VENC_SUBDEV_NAME, - .id = -1, - .num_resources = ARRAY_SIZE(dm365_venc_resources), - .resource = dm365_venc_resources, - .dev = { - .dma_mask = &dm365_video_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = (void *)&dm365_venc_pdata, - }, -}; - -static struct platform_device dm365_vpbe_dev = { - .name = "vpbe_controller", - .id = -1, - .dev = { - .dma_mask = &dm365_video_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -int __init dm365_init_video(struct vpfe_config *vpfe_cfg, - struct vpbe_config *vpbe_cfg) -{ - if (vpfe_cfg || vpbe_cfg) - platform_device_register(&dm365_vpss_device); - - if (vpfe_cfg) { - vpfe_capture_dev.dev.platform_data = vpfe_cfg; - platform_device_register(&dm365_isif_dev); - platform_device_register(&vpfe_capture_dev); - } - if (vpbe_cfg) { - dm365_vpbe_dev.dev.platform_data = vpbe_cfg; - platform_device_register(&dm365_osd_dev); - platform_device_register(&dm365_venc_dev); - platform_device_register(&dm365_vpbe_dev); - platform_device_register(&dm365_vpbe_display); - } - - return 0; -} - -static const struct davinci_aintc_config dm365_aintc_config = { - .reg = { - .start = DAVINCI_ARM_INTC_BASE, - .end = DAVINCI_ARM_INTC_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .num_irqs = 64, - .prios = dm365_default_priorities, -}; - -void __init dm365_init_irq(void) -{ - davinci_aintc_init(&dm365_aintc_config); -} - -static int __init dm365_init_devices(void) -{ - struct platform_device *edma_pdev; - int ret = 0; - - if (!cpu_is_davinci_dm365()) - return 0; - - davinci_cfg_reg(DM365_INT_EDMA_CC); - edma_pdev = platform_device_register_full(&dm365_edma_device); - if (IS_ERR(edma_pdev)) { - pr_warn("%s: Failed to register eDMA\n", __func__); - return PTR_ERR(edma_pdev); - } - - platform_device_register(&dm365_mdio_device); - platform_device_register(&dm365_emac_device); - - ret = davinci_init_wdt(); - if (ret) - pr_warn("%s: watchdog init failed: %d\n", __func__, ret); - - return ret; -} -postcore_initcall(dm365_init_devices); |