diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2019-05-07 07:44:33 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2019-05-07 07:44:33 -0700 |
| commit | 9bff9dfc513bd5de72cb59f4bffb72cf0a5aa526 (patch) | |
| tree | 3229206f8aa93ca4d34585b7eb4d3ed272397ae2 | |
| parent | 61be53f9ef37de2677cecb8f87b207e6f061e185 (diff) | |
| parent | 2e5f081003f033d37be3faf052aaccc8b6a44aa5 (diff) | |
Merge tag 'spi-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"One small feature was added this release but the bulk of the diffstat
and the changelog comes from the fact that several older drivers got
some fairly hefty reworks and a couple of new drivers were added:
- Support for detailed control of timing around chip selects from
Sowjanya Komatineni.
- A big set of fixes and imrovements for the Tegra114 driver from
Sowjanya Komatineni.
- A big simplification of the GPIO driver from Andrey Smirnov.
- DMA support and fixes for the Freescale LPSPI driver from Clark
Wang.
- Fixes and optimizations for the bcm2835aux from Martin Sparl.
- New drivers for Mediatek MT7621 (graduated from staging) and Zynq
QSPI"
[ This is a so-called "evil merge" that additionally removes a warning
due to an unused variable 'i' introduced by commit 1dfbf334f123 ("spi:
ep93xx: Convert to use CS GPIO descriptors") - Linus ]
* tag 'spi-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (127 commits)
spi: rspi: Fix handling of QSPI code when transmit and receive
spi: atmel-quadspi: fix crash while suspending
spi: stm32: return the get_irq error
spi: tegra114: fix PIO transfer
spi: pxa2xx: fix SCR (divisor) calculation
spi: Clear SPI_CS_HIGH flag from bad_bits for GPIO chip-select
spi: ep93xx: Convert to use CS GPIO descriptors
spi: AD ASoC: declare missing of table
spi: spi-mem: zynq-qspi: Fix build error on architectures missing readsl/writesl
spi: stm32-qspi: manage the get_irq error case
spi/spi-bcm2835: Split transfers that exceed DLEN
spi: expand mode support
dt-bindings: spi: spi-mt65xx: add support for MT8516
spi: pxa2xx: Add support for Intel Comet Lake
spi/trace: Cap buffer contents at 64 bytes
spi: Release spi_res after finalizing message
spi: Remove warning in spi_split_transfers_maxsize()
spi: Remove one needless transfer speed fall back case
spi: sh-msiof: Document r8a77470 bindings
spi: pxa2xx: use a module softdep for dw_dmac
...
60 files changed, 2650 insertions, 801 deletions
diff --git a/Documentation/devicetree/bindings/spi/fsl-spi.txt b/Documentation/devicetree/bindings/spi/fsl-spi.txt index 8854004a1d3a..411375eac54d 100644 --- a/Documentation/devicetree/bindings/spi/fsl-spi.txt +++ b/Documentation/devicetree/bindings/spi/fsl-spi.txt @@ -18,6 +18,10 @@ Optional properties: - gpios : specifies the gpio pins to be used for chipselects. The gpios will be referred to as reg = <index> in the SPI child nodes. If unspecified, a single SPI device without a chip select can be used. +- fsl,spisel_boot : for the MPC8306 and MPC8309, specifies that the + SPISEL_BOOT signal is used as chip select for a slave device. Use + reg = <number of gpios> in the corresponding child node, i.e. 0 if + the gpios property is not present. Example: spi@4c0 { diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt index 9ba7c5a273b4..db8e0d71c5bc 100644 --- a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt +++ b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt @@ -23,6 +23,18 @@ Required properties: Recommended properties: - spi-max-frequency: Definition as per Documentation/devicetree/bindings/spi/spi-bus.txt +Optional properties: +- nvidia,tx-clk-tap-delay: Delays the clock going out to the external device + with this tap value. This property is used to tune the outgoing data from + Tegra SPI master with respect to outgoing Tegra SPI master clock. + Tap values vary based on the platform design trace lengths from Tegra SPI + to corresponding slave devices. Valid tap values are from 0 thru 63. +- nvidia,rx-clk-tap-delay: Delays the clock coming in from the external device + with this tap value. This property is used to adjust the Tegra SPI master + clock with respect to the data from the SPI slave device. + Tap values vary based on the platform design trace lengths from Tegra SPI + to corresponding slave devices. Valid tap values are from 0 thru 63. + Example: spi@7000d600 { @@ -38,4 +50,12 @@ spi@7000d600 { reset-names = "spi"; dmas = <&apbdma 16>, <&apbdma 16>; dma-names = "rx", "tx"; + <spi-client>@<bus_num> { + ... + ... + nvidia,rx-clk-tap-delay = <0>; + nvidia,tx-clk-tap-delay = <16>; + ... + }; + }; diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt index 37cf69586d10..18e14ee257b2 100644 --- a/Documentation/devicetree/bindings/spi/sh-msiof.txt +++ b/Documentation/devicetree/bindings/spi/sh-msiof.txt @@ -4,6 +4,7 @@ Required properties: - compatible : "renesas,msiof-r8a7743" (RZ/G1M) "renesas,msiof-r8a7744" (RZ/G1N) "renesas,msiof-r8a7745" (RZ/G1E) + "renesas,msiof-r8a77470" (RZ/G1C) "renesas,msiof-r8a774a1" (RZ/G2M) "renesas,msiof-r8a774c0" (RZ/G2E) "renesas,msiof-r8a7790" (R-Car H2) diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt index 2864bc6b659c..f54c8c36395e 100644 --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt @@ -8,9 +8,16 @@ Required properties: - interrupts : One interrupt, used by the controller. - #address-cells : <1>, as required by generic SPI binding. - #size-cells : <0>, also as required by generic SPI binding. +- clocks : phandles for the clocks, see the description of clock-names below. + The phandle for the "ssi_clk" is required. The phandle for the "pclk" clock + is optional. If a single clock is specified but no clock-name, it is the + "ssi_clk" clock. If both clocks are listed, the "ssi_clk" must be first. Optional properties: -- cs-gpios : Specifies the gpio pis to be used for chipselects. +- clock-names : Contains the names of the clocks: + "ssi_clk", for the core clock used to generate the external SPI clock. + "pclk", the interface clock, required for register access. +- cs-gpios : Specifies the gpio pins to be used for chipselects. - num-cs : The number of chipselects. If omitted, this will default to 4. - reg-io-width : The I/O register width (in bytes) implemented by this device. Supported values are 2 or 4 (the default). @@ -25,6 +32,7 @@ Example: interrupts = <0 154 4>; #address-cells = <1>; #size-cells = <0>; + clocks = <&spi_m_clk>; num-cs = <2>; cs-gpios = <&gpio0 13 0>, <&gpio0 14 0>; diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt index 6cc3c6fe25a3..e71b81a41ac0 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt @@ -7,7 +7,11 @@ Required properties: - reg : address and length of the lpspi master registers - interrupt-parent : core interrupt controller - interrupts : lpspi interrupt -- clocks : lpspi clock specifier +- clocks : lpspi clock specifier. Its number and order need to correspond to the + value in clock-names. +- clock-names : Corresponding to per clock and ipg clock in "clocks" + respectively. In i.MX7ULP, it only has per clk, so use CLK_DUMMY + to fill the "ipg" blank. - spi-slave : spi slave mode support. In slave mode, add this attribute without value. In master mode, remove it. @@ -18,6 +22,8 @@ lpspi2: lpspi@40290000 { reg = <0x40290000 0x10000>; interrupt-parent = <&intc>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7ULP_CLK_LPSPI2>; + clocks = <&clks IMX7ULP_CLK_LPSPI2>, + <&clks IMX7ULP_CLK_DUMMY>; + clock-names = "per", "ipg"; spi-slave; }; diff --git a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt index 69c356767cf8..c0f6c8ecfa2e 100644 --- a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt +++ b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt @@ -10,6 +10,7 @@ Required properties: - mediatek,mt8135-spi: for mt8135 platforms - mediatek,mt8173-spi: for mt8173 platforms - mediatek,mt8183-spi: for mt8183 platforms + - "mediatek,mt8516-spi", "mediatek,mt2712-spi": for mt8516 platforms - #address-cells: should be 1. diff --git a/Documentation/devicetree/bindings/spi/spi-mt7621.txt b/Documentation/devicetree/bindings/spi/spi-mt7621.txt new file mode 100644 index 000000000000..d5baec0fa56e --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-mt7621.txt @@ -0,0 +1,26 @@ +Binding for MTK SPI controller (MT7621 MIPS) + +Required properties: +- compatible: Should be one of the following: + - "ralink,mt7621-spi": for mt7621/mt7628/mt7688 platforms +- #address-cells: should be 1. +- #size-cells: should be 0. +- reg: Address and length of the register set for the device +- resets: phandle to the reset controller asserting this device in + reset + See ../reset/reset.txt for details. + +Optional properties: +- cs-gpios: see spi-bus.txt. + +Example: + +- SoC Specific Portion: +spi0: spi@b00 { + compatible = "ralink,mt7621-spi"; + reg = <0xb00 0x100>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&rstctrl 18>; + reset-names = "spi"; +}; diff --git a/Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt b/Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt new file mode 100644 index 000000000000..16b734ad3102 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt @@ -0,0 +1,25 @@ +Xilinx Zynq QSPI controller Device Tree Bindings +------------------------------------------------------------------- + +Required properties: +- compatible : Should be "xlnx,zynq-qspi-1.0". +- reg : Physical base address and size of QSPI registers map. +- interrupts : Property with a value describing the interrupt + number. +- clock-names : List of input clock names - "ref_clk", "pclk" + (See clock bindings for details). +- clocks : Clock phandles (see clock bindings for details). + +Optional properties: +- num-cs : Number of chip selects used. + +Example: + qspi: spi@e000d000 { + compatible = "xlnx,zynq-qspi-1.0"; + reg = <0xe000d000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <0 19 4>; + clock-names = "ref_clk", "pclk"; + clocks = <&clkc 10>, <&clkc 43>; + num-cs = <1>; + }; diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary index 1721c1b570c3..1a63194b74d7 100644 --- a/Documentation/spi/spi-summary +++ b/Documentation/spi/spi-summary @@ -572,6 +572,12 @@ SPI MASTER METHODS 0: transfer is finished 1: transfer is still in progress + master->set_cs_timing(struct spi_device *spi, u8 setup_clk_cycles, + u8 hold_clk_cycles, u8 inactive_clk_cycles) + This method allows SPI client drivers to request SPI master controller + for configuring device specific CS setup, hold and inactive timing + requirements. + DEPRECATED METHODS master->transfer(struct spi_device *spi, struct spi_message *message) diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index 8e89ec8b6f0f..34e18e9556d9 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -29,6 +29,7 @@ #include <linux/platform_device.h> #include <linux/i2c.h> #include <linux/spi/spi.h> +#include <linux/gpio/machine.h> #include <sound/cs4271.h> @@ -105,13 +106,16 @@ static struct spi_board_info edb93xx_spi_board_info[] __initdata = { }, }; -static int edb93xx_spi_chipselects[] __initdata = { - EP93XX_GPIO_LINE_EGPIO6, +static struct gpiod_lookup_table edb93xx_spi_cs_gpio_table = { + .dev_id = "ep93xx-spi.0", + .table = { + GPIO_LOOKUP("A", 6, "cs", GPIO_ACTIVE_LOW), + { }, + }, }; static struct ep93xx_spi_info edb93xx_spi_info __initdata = { - .chipselect = edb93xx_spi_chipselects, - .num_chipselect = ARRAY_SIZE(edb93xx_spi_chipselects), + /* Intentionally left blank */ }; static void __init edb93xx_register_spi(void) @@ -123,6 +127,7 @@ static void __init edb93xx_register_spi(void) else if (machine_is_edb9315a()) edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO14; + gpiod_add_lookup_table(&edb93xx_spi_cs_gpio_table); ep93xx_register_spi(&edb93xx_spi_info, edb93xx_spi_board_info, ARRAY_SIZE(edb93xx_spi_board_info)); } diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c index 80ccb984d521..f0f38c0dba52 100644 --- a/arch/arm/mach-ep93xx/simone.c +++ b/arch/arm/mach-ep93xx/simone.c @@ -77,13 +77,15 @@ static struct spi_board_info simone_spi_devices[] __initdata = { * low between multi-message command blocks. From v1.4, it uses a GPIO instead. * v1.3 parts will still work, since the signal on SFRMOUT is automatic. */ -static int simone_spi_chipselects[] __initdata = { - EP93XX_GPIO_LINE_EGPIO1, +static struct gpiod_lookup_table simone_spi_cs_gpio_table = { + .dev_id = "ep93xx-spi.0", + .table = { + GPIO_LOOKUP("A", 1, "cs", GPIO_ACTIVE_LOW), + { }, + }, }; static struct ep93xx_spi_info simone_spi_info __initdata = { - .chipselect = simone_spi_chipselects, - .num_chipselect = ARRAY_SIZE(simone_spi_chipselects), .use_dma = 1, }; @@ -113,6 +115,7 @@ static void __init simone_init_machine(void) ep93xx_register_i2c(simone_i2c_board_info, ARRAY_SIZE(simone_i2c_board_info)); gpiod_add_lookup_table(&simone_mmc_spi_gpio_table); + gpiod_add_lookup_table(&simone_spi_cs_gpio_table); ep93xx_register_spi(&simone_spi_info, simone_spi_devices, ARRAY_SIZE(simone_spi_devices)); simone_register_audio(); diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c index 85b74ac943f0..a3a20c83c6b8 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -22,6 +22,7 @@ #include <linux/spi/mmc_spi.h> #include <linux/mmc/host.h> #include <linux/platform_data/spi-ep93xx.h> +#include <linux/gpio/machine.h> #include <mach/gpio-ep93xx.h> #include <mach/hardware.h> @@ -269,13 +270,15 @@ static struct spi_board_info bk3_spi_board_info[] __initdata = { * The all work is performed automatically by !SPI_FRAME (SFRM1) and * goes through CPLD */ -static int bk3_spi_chipselects[] __initdata = { - EP93XX_GPIO_LINE_F(3), +static struct gpiod_lookup_table bk3_spi_cs_gpio_table = { + .dev_id = "ep93xx-spi.0", + .table = { + GPIO_LOOKUP("F", 3, "cs", GPIO_ACTIVE_LOW), + { }, + }, }; static struct ep93xx_spi_info bk3_spi_master __initdata = { - .chipselect = bk3_spi_chipselects, - .num_chipselect = ARRAY_SIZE(bk3_spi_chipselects), .use_dma = 1, }; @@ -316,13 +319,17 @@ static struct spi_board_info ts72xx_spi_devices[] __initdata = { }, }; -static int ts72xx_spi_chipselects[] __initdata = { - EP93XX_GPIO_LINE_F(2), /* DIO_17 */ +static struct gpiod_lookup_table ts72xx_spi_cs_gpio_table = { + .dev_id = "ep93xx-spi.0", + .table = { + /* DIO_17 */ + GPIO_LOOKUP("F", 2, "cs", GPIO_ACTIVE_LOW), + { }, + }, }; static struct ep93xx_spi_info ts72xx_spi_info __initdata = { - .chipselect = ts72xx_spi_chipselects, - .num_chipselect = ARRAY_SIZE(ts72xx_spi_chipselects), + /* Intentionally left blank */ }; static void __init ts72xx_init_machine(void) @@ -339,6 +346,7 @@ static void __init ts72xx_init_machine(void) if (board_is_ts7300()) platform_device_register(&ts73xx_fpga_device); #endif + gpiod_add_lookup_table(&ts72xx_spi_cs_gpio_table); ep93xx_register_spi(&ts72xx_spi_info, ts72xx_spi_devices, ARRAY_SIZE(ts72xx_spi_devices)); } @@ -398,6 +406,7 @@ static void __init bk3_init_machine(void) ep93xx_register_eth(&ts72xx_eth_data, 1); + gpiod_add_lookup_table(&bk3_spi_cs_gpio_table); ep93xx_register_spi(&bk3_spi_master, bk3_spi_board_info, ARRAY_SIZE(bk3_spi_board_info)); diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c index 767ee64628dc..f95a644769e4 100644 --- a/arch/arm/mach-ep93xx/vision_ep9307.c +++ b/arch/arm/mach-ep93xx/vision_ep9307.c @@ -245,15 +245,17 @@ static struct spi_board_info vision_spi_board_info[] __initdata = { }, }; -static int vision_spi_chipselects[] __initdata = { - EP93XX_GPIO_LINE_EGPIO6, - EP93XX_GPIO_LINE_EGPIO7, - EP93XX_GPIO_LINE_G(2), +static struct gpiod_lookup_table vision_spi_cs_gpio_table = { + .dev_id = "ep93xx-spi.0", + .table = { + GPIO_LOOKUP_IDX("A", 6, "cs", 0, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX("A", 7, "cs", 1, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX("G", 2, "cs", 2, GPIO_ACTIVE_LOW), + { }, + }, }; static struct ep93xx_spi_info vision_spi_master __initdata = { - .chipselect = vision_spi_chipselects, - .num_chipselect = ARRAY_SIZE(vision_spi_chipselects), .use_dma = 1, }; @@ -295,6 +297,7 @@ static void __init vision_init_machine(void) ep93xx_register_i2c(vision_i2c_info, ARRAY_SIZE(vision_i2c_info)); gpiod_add_lookup_table(&vision_spi_mmc_gpio_table); + gpiod_add_lookup_table(&vision_spi_cs_gpio_table); ep93xx_register_spi(&vision_spi_master, vision_spi_board_info, ARRAY_SIZE(vision_spi_board_info)); vision_register_i2s(); diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 34e5414c5563..f402aa741bf3 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -806,7 +806,6 @@ static struct spi_board_info spi_bus[] = { .platform_data = &mmc_spi_info, .max_speed_hz = 5000000, .mode = SPI_MODE_0, - .controller_data = (void *) GPIO_PTM4, }, }; @@ -838,6 +837,14 @@ static struct platform_device msiof0_device = { .resource = msiof0_resources, }; +static struct gpiod_lookup_table msiof_gpio_table = { + .dev_id = "spi_sh_msiof.0", + .table = { + GPIO_LOOKUP("sh7724_pfc", GPIO_PTM4, "cs", GPIO_ACTIVE_HIGH), + { }, + }, +}; + #endif /* FSI */ @@ -1296,12 +1303,11 @@ static int __init arch_setup(void) gpio_request(GPIO_FN_MSIOF0_TXD, NULL); gpio_request(GPIO_FN_MSIOF0_RXD, NULL); gpio_request(GPIO_FN_MSIOF0_TSCK, NULL); - gpio_request(GPIO_PTM4, NULL); /* software CS control of TSYNC pin */ - gpio_direction_output(GPIO_PTM4, 1); /* active low CS */ gpio_request(GPIO_PTB6, NULL); /* 3.3V power control */ gpio_direction_output(GPIO_PTB6, 0); /* disable power by default */ gpiod_add_lookup_table(&mmc_spi_gpio_table); + gpiod_add_lookup_table(&msiof_gpio_table); spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus)); #endif diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index f761655e2a36..0fba8f400c59 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -426,6 +426,12 @@ config SPI_MT65XX say Y or M here.If you are not sure, say N. SPI drivers for Mediatek MT65XX and MT81XX series ARM SoCs. +config SPI_MT7621 + tristate "MediaTek MT7621 SPI Controller" + depends on RALINK || COMPILE_TEST + help + This selects a driver for the MediaTek MT7621 SPI Controller. + config SPI_NPCM_PSPI tristate "Nuvoton NPCM PSPI Controller" depends on ARCH_NPCM || COMPILE_TEST @@ -842,9 +848,17 @@ config SPI_XTENSA_XTFPGA 16 bit words in SPI mode 0, automatically asserting CS on transfer start and deasserting on end. +config SPI_ZYNQ_QSPI + tristate "Xilinx Zynq QSPI controller" + depends on ARCH_ZYNQ || COMPILE_TEST + help + This enables support for the Zynq Quad SPI controller + in master mode. + This controller only supports SPI memory interface. + config SPI_ZYNQMP_GQSPI tristate "Xilinx ZynqMP GQSPI controller" - depends on SPI_MASTER && HAS_DMA + depends on (SPI_MASTER && HAS_DMA) || COMPILE_TEST help Enables Xilinx GQSPI controller driver for Zynq UltraScale+ MPSoC. diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index d8fc03c9faa2..f2f78d03dc28 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -60,6 +60,7 @@ obj-$(CONFIG_SPI_MPC512x_PSC) += spi-mpc512x-psc.o obj-$(CONFIG_SPI_MPC52xx_PSC) += spi-mpc52xx-psc.o obj-$(CONFIG_SPI_MPC52xx) += spi-mpc52xx.o obj-$(CONFIG_SPI_MT65XX) += spi-mt65xx.o +obj-$(CONFIG_SPI_MT7621) += spi-mt7621.o obj-$(CONFIG_SPI_MXIC) += spi-mxic.o obj-$(CONFIG_SPI_MXS) += spi-mxs.o obj-$(CONFIG_SPI_NPCM_PSPI) += spi-npcm-pspi.o @@ -118,6 +119,7 @@ obj-$(CONFIG_SPI_XCOMM) += spi-xcomm.o obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o obj-$(CONFIG_SPI_XLP) += spi-xlp.o obj-$(CONFIG_SPI_XTENSA_XTFPGA) += spi-xtensa-xtfpga.o +obj-$(CONFIG_SPI_ZYNQ_QSPI) += spi-zynq-qspi.o obj-$(CONFIG_SPI_ZYNQMP_GQSPI) += spi-zynqmp-gqspi.o # SPI slave protocol handlers diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c index fffc21cd5f79..9f24d5f0b431 100644 --- a/drivers/spi/atmel-quadspi.c +++ b/drivers/spi/atmel-quadspi.c @@ -366,7 +366,7 @@ static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) return err; } -const char *atmel_qspi_get_name(struct spi_mem *spimem) +static const char *atmel_qspi_get_name(struct spi_mem *spimem) { return dev_name(spimem->spi->dev.parent); } @@ -570,7 +570,8 @@ static int atmel_qspi_remove(struct platform_device *pdev) static int __maybe_unused atmel_qspi_suspend(struct device *dev) { - struct atmel_qspi *aq = dev_get_drvdata(dev); + struct spi_controller *ctrl = dev_get_drvdata(dev); + struct atmel_qspi *aq = spi_controller_get_devdata(ctrl); clk_disable_unprepare(aq->qspick); clk_disable_unprepare(aq->pclk); @@ -580,7 +581,8 @@ static int __maybe_unused atmel_qspi_suspend(struct device *dev) static int __maybe_unused atmel_qspi_resume(struct device *dev) { - struct atmel_qspi *aq = dev_get_drvdata(dev); + struct spi_controller *ctrl = dev_get_drvdata(dev); + struct atmel_qspi *aq = spi_controller_get_devdata(ctrl); clk_prepare_enable(aq->pclk); clk_prepare_enable(aq->qspick); diff --git a/drivers/spi/spi-at91-usart.c b/drivers/spi/spi-at91-usart.c index a694d702e574..f763e14bdf12 100644 --- a/drivers/spi/spi-at91-usart.c +++ b/drivers/spi/spi-at91-usart.c @@ -178,12 +178,6 @@ static int at91_usart_spi_setup(struct spi_device *spi) struct at91_usart_spi *aus = spi_master_get_devdata(spi->controller); u32 *ausd = spi->controller_state; unsigned int mr = at91_usart_spi_readl(aus, MR); - u8 bits = spi->bits_per_word; - - if (bits != 8) { - dev_dbg(&spi->dev, "Only 8 bits per word are supported\n"); - return -EINVAL; - } if (spi->mode & SPI_CPOL) mr |= US_MR_CPOL; @@ -212,7 +206,7 @@ static int at91_usart_spi_setup(struct spi_device *spi) dev_dbg(&spi->dev, "setup: bpw %u mode 0x%x -> mr %d %08x\n", - bits, spi->mode, spi->chip_select, mr); + spi->bits_per_word, spi->mode, spi->chip_select, mr); return 0; } diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c index 35aebdfd3b4e..8aa22713c483 100644 --- a/drivers/spi/spi-bcm2835.c +++ b/drivers/spi/spi-bcm2835.c @@ -335,20 +335,6 @@ static int bcm2835_spi_transfer_one_irq(struct spi_master *master, return 1; } -/* - * DMA support - * - * this implementation has currently a few issues in so far as it does - * not work arrount limitations of the HW. - * - * the main one being that DMA transfers are limited to 16 bit - * (so 0 to 65535 bytes) by the SPI HW due to BCM2835_SPI_DLEN - * - * there may be a few more border-cases we may need to address as well - * but unfortunately this would mean splitting up the scatter-gather - * list making it slightly unpractical... - */ - /** * bcm2835_spi_transfer_prologue() - transfer first few bytes without DMA * @master: SPI master @@ -630,19 +616,6 @@ static bool bcm2835_spi_can_dma(struct spi_master *master, if (tfr->len < BCM2835_SPI_DMA_MIN_LENGTH) return false; - /* BCM2835_SPI_DLEN has defined a max transfer size as - * 16 bit, so max is 65535 - * we can revisit this by using an alternative transfer - * method - ideally this would get done without any more - * interaction... - */ - if (tfr->len > 65535) { - dev_warn_once(&spi->dev, - "transfer size of %d too big for dma-transfer\n", - tfr->len); - return false; - } - /* return OK */ return true; } @@ -707,7 +680,6 @@ static void bcm2835_dma_init(struct spi_master *master, struct device *dev) /* all went well, so set can_dma */ master->can_dma = bcm2835_spi_can_dma; - master->max_dma_len = 65535; /* limitation by BCM2835_SPI_DLEN */ /* need to do TX AND RX DMA, so we need dummy buffers */ master->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX; @@ -844,6 +816,17 @@ static int bcm2835_spi_prepare_message(struct spi_master *master, struct spi_device *spi = msg->spi; struct bcm2835_spi *bs = spi_master_get_devdata(master); u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS); + int ret; + + /* + * DMA transfers are limited to 16 bit (0 to 65535 bytes) by the SPI HW + * due to DLEN. Split up transfers (32-bit FIFO aligned) if the limit is + * exceeded. + */ + ret = spi_split_transfers_maxsize(master, msg, 65532, + GFP_KERNEL | GFP_DMA); + if (ret) + return ret; cs &= ~(BCM2835_SPI_CS_CPOL | BCM2835_SPI_CS_CPHA); diff --git a/drivers/spi/spi-bcm2835aux.c b/drivers/spi/spi-bcm2835aux.c index f7e054848ca5..bbf87adb3ff8 100644 --- a/drivers/spi/spi-bcm2835aux.c +++ b/drivers/spi/spi-bcm2835aux.c @@ -21,6 +21,7 @@ #include <linux/clk.h> #include <linux/completion.h> +#include <linux/debugfs.h> #include <linux/delay.h> #include <linux/err.h> #include <linux/interrupt.h> @@ -36,6 +37,12 @@ #include <linux/spi/spi.h> #include <linux/spinlock.h> +/* define polling limits */ +static unsigned int polling_limit_us = 30; +module_param(polling_limit_us, uint, 0664); +MODULE_PARM_DESC(polling_limit_us, + "time in us to run a transfer in polling mode - if zero no polling is used\n"); + /* * spi register defines * @@ -88,10 +95,6 @@ #define BCM2835_AUX_SPI_STAT_BUSY 0x00000040 #define BCM2835_AUX_SPI_STAT_BITCOUNT 0x0000003F -/* timeout values */ -#define BCM2835_AUX_SPI_POLLING_LIMIT_US 30 -#define BCM2835_AUX_SPI_POLLING_JIFFIES 2 - struct bcm2835aux_spi { void __iomem *regs; struct clk *clk; @@ -102,8 +105,53 @@ struct bcm2835aux_spi { int tx_len; int rx_len; int pending; + + u64 count_transfer_polling; + u64 count_transfer_irq; + u64 count_transfer_irq_after_poll; + + struct dentry *debugfs_dir; }; +#if defined(CONFIG_DEBUG_FS) +static void bcm2835aux_debugfs_create(struct bcm2835aux_spi *bs, + const char *dname) +{ + char name[64]; + struct dentry *dir; + + /* get full name */ + snprintf(name, sizeof(name), "spi-bcm2835aux-%s", dname); + + /* the base directory */ + dir = debugfs_create_dir(name, NULL); + bs->debugfs_dir = dir; + + /* the counters */ + debugfs_create_u64("count_transfer_polling", 0444, dir, + &bs->count_transfer_polling); + debugfs_create_u64("count_transfer_irq", 0444, dir, + &bs->count_transfer_irq); + debugfs_create_u64("count_transfer_irq_after_poll", 0444, dir, + &bs->count_transfer_irq_after_poll); +} + +static void bcm2835aux_debugfs_remove(struct bcm2835aux_spi *bs) +{ + debugfs_remove_recursive(bs->debugfs_dir); + bs->debugfs_dir = NULL; +} +#else +static void bcm2835aux_debugfs_create(struct bcm2835aux_spi *bs, + const char *dname) +{ +} + +static void bcm2835aux_debugfs_remove(struct bcm2835aux_spi *bs) +{ +} +#endif /* CONFIG_DEBUG_FS */ + static inline u32 bcm2835aux_rd(struct bcm2835aux_spi *bs, unsigned reg) { return readl(bs->regs + reg); @@ -123,9 +171,6 @@ static inline void bcm2835aux_rd_fifo(struct bcm2835aux_spi *bs) data = bcm2835aux_rd(bs, BCM2835_AUX_SPI_IO); if (bs->rx_buf) { switch (count) { - case 4: - *bs->rx_buf++ = (data >> 24) & 0xff; - /* fallthrough */ case 3: *bs->rx_buf++ = (data >> 16) & 0xff; /* fallthrough */ @@ -178,24 +223,14 @@ static void bcm2835aux_spi_reset_hw(struct bcm2835aux_spi *bs) BCM2835_AUX_SPI_CNTL0_CLEARFIFO); } -static irqreturn_t bcm2835aux_spi_interrupt(int irq, void *dev_id) +static void bcm2835aux_spi_transfer_helper(struct bcm2835aux_spi *bs) { - struct spi_master *master = dev_id; - struct bcm2835aux_spi *bs = spi_master_get_devdata(master); - irqreturn_t ret = IRQ_NONE; - - /* IRQ may be shared, so return if our interrupts are disabled */ - if (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_CNTL1) & - (BCM2835_AUX_SPI_CNTL1_TXEMPTY | BCM2835_AUX_SPI_CNTL1_IDLE))) - return ret; + u32 stat = bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT); /* check if we have data to read */ - while (bs->rx_len && - (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT) & - BCM2835_AUX_SPI_STAT_RX_EMPTY))) { + for (; bs->rx_len && (stat & BCM2835_AUX_SPI_STAT_RX_LVL); + stat = bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT)) bcm2835aux_rd_fifo(bs); - ret = IRQ_HANDLED; - } /* check if we have data to write */ while (bs->tx_len && @@ -203,16 +238,21 @@ static irqreturn_t bcm2835aux_spi_interrupt(int irq, void *dev_id) (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT) & BCM2835_AUX_SPI_STAT_TX_FULL))) { bcm2835aux_wr_fifo(bs); - ret = IRQ_HANDLED; } +} - /* and check if we have reached "done" */ - while (bs->rx_len && - (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT) & - BCM2835_AUX_SPI_STAT_BUSY))) { - bcm2835aux_rd_fifo(bs); - ret = IRQ_HANDLED; - } +static irqreturn_t bcm2835aux_spi_interrupt(int irq, void *dev_id) +{ + struct spi_master *master = dev_id; + struct bcm2835aux_spi *bs = spi_master_get_devdata(master); + + /* IRQ may be shared, so return if our interrupts are disabled */ + if (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_CNTL1) & + (BCM2835_AUX_SPI_CNTL1_TXEMPTY | BCM2835_AUX_SPI_CNTL1_IDLE))) + return IRQ_NONE; + + /* do common fifo handling */ + bcm2835aux_spi_transfer_helper(bs); if (!bs->tx_len) { /* disable tx fifo empty interrupt */ @@ -226,8 +266,7 @@ static irqreturn_t bcm2835aux_spi_interrupt(int irq, void *dev_id) complete(&master->xfer_completion); } - /* and return */ - return ret; + return IRQ_HANDLED; } static int __bcm2835aux_spi_transfer_one_irq(struct spi_master *master, @@ -251,6 +290,9 @@ static int bcm2835aux_spi_transfer_one_irq(struct spi_master *master, { struct bcm2835aux_spi *bs = spi_master_get_devdata(master); + /* update statistics */ + bs->count_transfer_irq++; + /* fill in registers and fifos before enabling interrupts */ bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL1, bs->cntl[1]); bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL0, bs->cntl[0]); @@ -273,35 +315,22 @@ static int bcm2835aux_spi_transfer_one_poll(struct spi_master *master, { struct bcm2835aux_spi *bs = spi_master_get_devdata(master); unsigned long timeout; - u32 stat; + + /* update statistics */ + bs->count_transfer_polling++; /* configure spi */ bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL1, bs->cntl[1]); bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL0, bs->cntl[0]); - /* set the timeout */ - timeout = jiffies + BCM2835_AUX_SPI_POLLING_JIFFIES; + /* set the timeout to at least 2 jiffies */ + timeout = jiffies + 2 + HZ * polling_limit_us / 1000000; /* loop until finished the transfer */ while (bs->rx_len) { - /* read status */ - stat = bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT); - /* fill in tx fifo with remaining data */ - if ((bs->tx_len) && (!(stat & BCM2835_AUX_SPI_STAT_TX_FULL))) { - bcm2835aux_wr_fifo(bs); - continue; - } - - /* read data from fifo for both cases */ - if (!(stat & BCM2835_AUX_SPI_STAT_RX_EMPTY)) { - bcm2835aux_rd_fifo(bs); - continue; - } - if (!(stat & BCM2835_AUX_SPI_STAT_BUSY)) { - bcm2835aux_rd_fifo(bs); - continue; - } + /* do common fifo handling */ + bcm2835aux_spi_transfer_helper(bs); /* there is still data pending to read check the timeout */ if (bs->rx_len && time_after(jiffies, timeout)) { @@ -310,6 +339,7 @@ static int bcm2835aux_spi_transfer_one_poll(struct spi_master *master, jiffies - timeout, bs->tx_len, bs->rx_len); /* forward to interrupt handler */ + bs->count_transfer_irq_after_poll++; return __bcm2835aux_spi_transfer_one_irq(master, spi, tfr); } @@ -324,8 +354,8 @@ static int bcm2835aux_spi_transfer_one(struct spi_master *master, struct spi_transfer *tfr) { struct bcm2835aux_spi *bs = spi_master_get_devdata(master); - unsigned long spi_hz, clk_hz, speed; - unsigned long spi_used_hz; + unsigned long spi_hz, clk_hz, speed, spi_used_hz; + unsigned long hz_per_byte, byte_limit; /* calculate the registers to handle * @@ -369,14 +399,15 @@ static int bcm2835aux_spi_transfer_one(struct spi_master *master, * of Hz per byte per polling limit. E.g., we can transfer 1 byte in * 30 µs per 300,000 Hz of bus clock. */ -#define HZ_PER_BYTE ((9 * 1000000) / BCM2835_AUX_SPI_POLLING_LIMIT_US) + hz_per_byte = polling_limit_us ? (9 * 1000000) / polling_limit_us : 0; + byte_limit = hz_per_byte ? spi_used_hz / hz_per_byte : 1; + /* run in polling mode for short transfers */ - if (tfr->len < spi_used_hz / HZ_PER_BYTE) + if (tfr->len < byte_limit) return bcm2835aux_spi_transfer_one_poll(master, spi, tfr); /* run in interrupt mode for all others */ return bcm2835aux_spi_transfer_one_irq(master, spi, tfr); -#undef HZ_PER_BYTE } static int bcm2835aux_spi_prepare_message(struct spi_master *master, @@ -421,6 +452,50 @@ static void bcm2835aux_spi_handle_err(struct spi_master *master, bcm2835aux_spi_reset_hw(bs); } +static int bcm2835aux_spi_setup(struct spi_device *spi) +{ + int ret; + + /* sanity check for native cs */ + if (spi->mode & SPI_NO_CS) + return 0; + if (gpio_is_valid(spi->cs_gpio)) { + /* with gpio-cs set the GPIO to the correct level + * and as output (in case the dt has the gpio not configured + * as output but native cs) + */ + ret = gpio_direction_output(spi->cs_gpio, + (spi->mode & SPI_CS_HIGH) ? 0 : 1); + if (ret) + dev_err(&spi->dev, + "could not set gpio %i as output: %i\n", + spi->cs_gpio, ret); + + return ret; + } + + /* for dt-backwards compatibility: only support native on CS0 + * known things not supported with broken native CS: + * * multiple chip-selects: cs0-cs2 are all + * simultaniously asserted whenever there is a transfer + * this even includes SPI_NO_CS + * * SPI_CS_HIGH: cs are always asserted low + * * cs_change: cs is deasserted after each spi_transfer + * * cs_delay_usec: cs is always deasserted one SCK cycle + * after the last transfer + * probably more... + */ + dev_warn(&spi->dev, + "Native CS is not supported - please configure cs-gpio in device-tree\n"); + + if (spi->chip_select == 0) + return 0; + + dev_warn(&spi->dev, "Native CS is not working for cs > 0\n"); + + return -EINVAL; +} + static int bcm2835aux_spi_probe(struct platform_device *pdev) { struct spi_master *master; @@ -438,7 +513,19 @@ static int bcm2835aux_spi_probe(struct platform_device *pdev) platform_set_drvdata(pdev, master); master->mode_bits = (SPI_CPOL | SPI_CS_HIGH | SPI_NO_CS); master->bits_per_word_mask = SPI_BPW_MASK(8); - master->num_chipselect = -1; + /* even though the driver never officially supported native CS + * allow a single native CS for legacy DT support purposes when + * no cs-gpio is configured. + * Known limitations for native cs are: + * * multiple chip-selects: cs0-cs2 are all simultaniously asserted + * whenever there is a transfer - this even includes SPI_NO_CS + * * SPI_CS_HIGH: is ignores - cs are always asserted low + * * cs_change: cs is deasserted after each spi_transfer + * * cs_delay_usec: cs is always deasserted one SCK cycle after + * a spi_transfer + */ + master->num_chipselect = 1; + master->setup = bcm2835aux_spi_setup; master->transfer_one = bcm2835aux_spi_transfer_one; master->handle_err = bcm2835aux_spi_handle_err; master->prepare_message = bcm2835aux_spi_prepare_message; @@ -502,6 +589,8 @@ static int bcm2835aux_spi_probe(struct platform_device *pdev) goto out_clk_disable; } + bcm2835aux_debugfs_create(bs, dev_name(&pdev->dev)); + return 0; out_clk_disable: @@ -516,6 +605,8 @@ static int bcm2835aux_spi_remove(struct platform_device *pdev) struct spi_master *master = platform_get_drvdata(pdev); struct bcm2835aux_spi *bs = spi_master_get_devdata(master); + bcm2835aux_debugfs_remove(bs); + bcm2835aux_spi_reset_hw(bs); /* disable the HW block by releasing the clock */ diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c index dd9a8c54a693..4243e53f9f7b 100644 --- a/drivers/spi/spi-bitbang.c +++ b/drivers/spi/spi-bitbang.c @@ -335,6 +335,42 @@ static void spi_bitbang_set_cs(struct spi_device *spi, bool enable) /*----------------------------------------------------------------------*/ +int spi_bitbang_init(struct spi_bitbang *bitbang) +{ + struct spi_master *master = bitbang->master; + + if (!master || !bitbang->chipselect) + return -EINVAL; + + mutex_init(&bitbang->lock); + + if (!master->mode_bits) + master->mode_bits = SPI_CPOL | SPI_CPHA | bitbang->flags; + + if (master->transfer || master->transfer_one_message) + return -EINVAL; + + master->prepare_transfer_hardware = spi_bitbang_prepare_hardware; + master->unprepare_transfer_hardware = spi_bitbang_unprepare_hardware; + master->transfer_one = spi_bitbang_transfer_one; + master->set_cs = spi_bitbang_set_cs; + + if (!bitbang->txrx_bufs) { + bitbang->use_dma = 0; + bitbang->txrx_bufs = spi_bitbang_bufs; + if (!master->setup) { + if (!bitbang->setup_transfer) + bitbang->setup_transfer = + spi_bitbang_setup_transfer; + master->setup = spi_bitbang_setup; + master->cleanup = spi_bitbang_cleanup; + } + } + + return 0; +} +EXPORT_SYMBOL_GPL(spi_bitbang_init); + /** * spi_bitbang_start - start up a polled/bitbanging SPI master driver * @bitbang: driver handle @@ -368,33 +404,9 @@ int spi_bitbang_start(struct spi_bitbang *bitbang) struct spi_master *master = bitbang->master; int ret; - if (!master || !bitbang->chipselect) - return -EINVAL; - - mutex_init(&bitbang->lock); - - if (!master->mode_bits) - master->mode_bits = SPI_CPOL | SPI_CPHA | bitbang->flags; - - if (master->transfer || master->transfer_one_message) - return -EINVAL; - - master->prepare_transfer_hardware = spi_bitbang_prepare_hardware; - master->unprepare_transfer_hardware = spi_bitbang_unprepare_hardware; - master->transfer_one = spi_bitbang_transfer_one; - master->set_cs = spi_bitbang_set_cs; - - if (!bitbang->txrx_bufs) { - bitbang->use_dma = 0; - bitbang->txrx_bufs = spi_bitbang_bufs; - if (!master->setup) { - if (!bitbang->setup_transfer) - bitbang->setup_transfer = - spi_bitbang_setup_transfer; - master->setup = spi_bitbang_setup; - master->cleanup = spi_bitbang_cleanup; - } - } + ret = spi_bitbang_init(bitbang); + if (ret) + return ret; /* driver may get busy before register() returns, especially * if someone registered boardinfo for devices diff --git a/drivers/spi/spi-dw-mmio.c b/drivers/spi/spi-dw-mmio.c index 4bd59a93d988..de952b17bc10 100644 --- a/drivers/spi/spi-dw-mmio.c +++ b/drivers/spi/spi-dw-mmio.c @@ -30,6 +30,7 @@ struct dw_spi_mmio { struct dw_spi dws; struct clk *clk; + struct clk *pclk; void *priv; }; @@ -172,6 +173,14 @@ static int dw_spi_mmio_probe(struct platform_device *pdev) if (ret) return ret; + /* Optional clock needed to access the registers */ + dwsmmio->pclk = devm_clk_get_optional(&pdev->dev, "pclk"); + if (IS_ERR(dwsmmio->pclk)) + return PTR_ERR(dwsmmio->pclk); + ret = clk_prepare_enable(dwsmmio->pclk); + if (ret) + goto out_clk; + dws->bus_num = pdev->id; dws->max_freq = clk_get_rate(dwsmmio->clk); @@ -199,6 +208,8 @@ static int dw_spi_mmio_probe(struct platform_device *pdev) return 0; out: + clk_disable_unprepare(dwsmmio->pclk); +out_clk: clk_disable_unprepare(dwsmmio->clk); return ret; } @@ -208,6 +219,7 @@ static int dw_spi_mmio_remove(struct platform_device *pdev) struct dw_spi_mmio *dwsmmio = platform_get_drvdata(pdev); dw_spi_remove_host(&dwsmmio->dws); + clk_disable_unprepare(dwsmmio->pclk); clk_disable_unprepare(dwsmmio->clk); return 0; diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c index 79fc3940245a..81889389280b 100644 --- a/drivers/spi/spi-ep93xx.c +++ b/drivers/spi/spi-ep93xx.c @@ -28,7 +28,6 @@ #include <linux/platform_device.h> #include <linux/sched.h> #include <linux/scatterlist.h> -#include <linux/gpio.h> #include <linux/spi/spi.h> #include <linux/platform_data/dma-ep93xx.h> @@ -652,7 +651,6 @@ static int ep93xx_spi_probe(struct platform_device *pdev) struct resource *res; int irq; int error; - int i; info = dev_get_platdata(&pdev->dev); if (!info) { @@ -676,6 +674,7 @@ static int ep93xx_spi_probe(struct platform_device *pdev) if (!master) return -ENOMEM; + master->use_gpio_descriptors = true; master->prepare_transfer_hardware = ep93xx_spi_prepare_hardware; master->unprepare_transfer_hardware = ep93xx_spi_unprepare_hardware; master->prepare_message = ep93xx_spi_prepare_message; @@ -683,31 +682,11 @@ static int ep93xx_spi_probe(struct platform_device *pdev) master->bus_num = pdev->id; master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16); - - master->num_chipselect = info->num_chipselect; - master->cs_gpios = devm_kcalloc(&master->dev, - master->num_chipselect, sizeof(int), - GFP_KERNEL); - if (!master->cs_gpios) { - error = -ENOMEM; - goto fail_release_master; - } - - for (i = 0; i < master->num_chipselect; i++) { - master->cs_gpios[i] = info->chipselect[i]; - - if (!gpio_is_valid(master->cs_gpios[i])) - continue; - - error = devm_gpio_request_one(&pdev->dev, master->cs_gpios[i], - GPIOF_OUT_INIT_HIGH, - "ep93xx-spi"); - if (error) { - dev_err(&pdev->dev, "could not request cs gpio %d\n", - master->cs_gpios[i]); - goto fail_release_master; - } - } + /* + * The SPI core will count the number of GPIO descriptors to figure + * out the number of chip selects available on the platform. + */ + master->num_chipselect = 0; platform_set_drvdata(pdev, master); diff --git a/drivers/spi/spi-fsl-lib.h b/drivers/spi/spi-fsl-lib.h index f303f306b38e..483734bc1b1e 100644 --- a/drivers/spi/spi-fsl-lib.h +++ b/drivers/spi/spi-fsl-lib.h @@ -95,8 +95,10 @@ static inline u32 mpc8xxx_spi_read_reg(__be32 __iomem *reg) struct mpc8xxx_spi_probe_info { struct fsl_spi_platform_data pdata; + int ngpios; int *gpios; bool *alow_flags; + __be32 __iomem *immr_spi_cs; }; extern u32 mpc8xxx_spi_tx_buf_u8(struct mpc8xxx_spi *mpc8xxx_spi); diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c index 391863914043..d08e9324140e 100644 --- a/drivers/spi/spi-fsl-lpspi.c +++ b/drivers/spi/spi-fsl-lpspi.c @@ -8,7 +8,10 @@ #include <linux/clk.h> #include <linux/completion.h> #include <linux/delay.h> +#include <linux/dmaengine.h> +#include <linux/dma-mapping.h> #include <linux/err.h> +#include <linux/gpio.h> #include <linux/interrupt.h> #include <linux/io.h> #include <linux/irq.h> @@ -16,7 +19,12 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/of_gpio.h> +#include <linux/pinctrl/consumer.h> #include <linux/platform_device.h> +#include <linux/platform_data/dma-imx.h> +#include <linux/platform_data/spi-imx.h> +#include <linux/pm_runtime.h> #include <linux/slab.h> #include <linux/spi/spi.h> #include <linux/spi/spi_bitbang.h> @@ -24,6 +32,11 @@ #define DRIVER_NAME "fsl_lpspi" +#define FSL_LPSPI_RPM_TIMEOUT 50 /* 50ms */ + +/* The maximum bytes that edma can transfer once.*/ +#define FSL_LPSPI_MAX_EDMA_BYTES ((1 << 15) - 1) + /* i.MX7ULP LPSPI registers */ #define IMX7ULP_VERID 0x0 #define IMX7ULP_PARAM 0x4 @@ -57,12 +70,14 @@ #define IER_FCIE BIT(9) #define IER_RDIE BIT(1) #define IER_TDIE BIT(0) +#define DER_RDDE BIT(1) +#define DER_TDDE BIT(0) #define CFGR1_PCSCFG BIT(27) #define CFGR1_PINCFG (BIT(24)|BIT(25)) #define CFGR1_PCSPOL BIT(8) #define CFGR1_NOSTALL BIT(3) #define CFGR1_MASTER BIT(0) -#define FSR_RXCOUNT (BIT(16)|BIT(17)|BIT(18)) +#define FSR_TXCOUNT (0xFF) #define RSR_RXEMPTY BIT(1) #define TCR_CPOL BIT(31) #define TCR_CPHA BIT(30) @@ -84,8 +99,11 @@ struct lpspi_config { struct fsl_lpspi_data { struct device *dev; void __iomem *base; - struct clk *clk; + unsigned long base_phys; + struct clk *clk_ipg; + struct clk *clk_per; bool is_slave; + bool is_first_byte; void *rx_buf; const void *tx_buf; @@ -101,6 +119,13 @@ struct fsl_lpspi_data { struct completion xfer_done; bool slave_aborted; + + /* DMA */ + bool usedma; + struct completion dma_rx_completion; + struct completion dma_tx_completion; + + int chipselect[0]; }; static const struct of_device_id fsl_lpspi_dt_ids[] = { @@ -147,12 +172,48 @@ static void fsl_lpspi_intctrl(struct fsl_lpspi_data *fsl_lpspi, writel(enable, fsl_lpspi->base + IMX7ULP_IER); } +static int fsl_lpspi_bytes_per_word(const int bpw) +{ + return DIV_ROUND_UP(bpw, BITS_PER_BYTE); +} + +static bool fsl_lpspi_can_dma(struct spi_controller *controller, + struct spi_device *spi, + struct spi_transfer *transfer) +{ + unsigned int bytes_per_word; + + if (!controller->dma_rx) + return false; + + bytes_per_word = fsl_lpspi_bytes_per_word(transfer->bits_per_word); + + switch (bytes_per_word) + { + case 1: + case 2: + case 4: + break; + default: + return false; + } + + return true; +} + static int lpspi_prepare_xfer_hardware(struct spi_controller *controller) { struct fsl_lpspi_data *fsl_lpspi = spi_controller_get_devdata(controller); + int ret; + + ret = pm_runtime_get_sync(fsl_lpspi->dev); + if (ret < 0) { + dev_err(fsl_lpspi->dev, "failed to enable clock\n"); + return ret; + } - return clk_prepare_enable(fsl_lpspi->clk); + return 0; } static int lpspi_unprepare_xfer_hardware(struct spi_controller *controller) @@ -160,7 +221,22 @@ static int lpspi_unprepare_xfer_hardware(struct spi_controller *controller) struct fsl_lpspi_data *fsl_lpspi = spi_controller_get_devdata(controller); - clk_disable_unprepare(fsl_lpspi->clk); + pm_runtime_mark_last_busy(fsl_lpspi->dev); + pm_runtime_put_autosuspend(fsl_lpspi->dev); + + return 0; +} + +static int fsl_lpspi_prepare_message(struct spi_controller *controller, + struct spi_message *msg) +{ + struct fsl_lpspi_data *fsl_lpspi = + spi_controller_get_devdata(controller); + struct spi_device *spi = msg->spi; + int gpio = fsl_lpspi->chipselect[spi->chip_select]; + + if (gpio_is_valid(gpio)) + gpio_direction_output(gpio, spi->mode & SPI_CS_HIGH ? 0 : 1); return 0; } @@ -197,8 +273,7 @@ static void fsl_lpspi_read_rx_fifo(struct fsl_lpspi_data *fsl_lpspi) fsl_lpspi->rx(fsl_lpspi); } -static void fsl_lpspi_set_cmd(struct fsl_lpspi_data *fsl_lpspi, - bool is_first_xfer) +static void fsl_lpspi_set_cmd(struct fsl_lpspi_data *fsl_lpspi) { u32 temp = 0; @@ -213,11 +288,13 @@ static void fsl_lpspi_set_cmd(struct fsl_lpspi_data *fsl_lpspi, * For the first transfer, clear TCR_CONTC to assert SS. * For subsequent transfer, set TCR_CONTC to keep SS asserted. */ - temp |= TCR_CONT; - if (is_first_xfer) - temp &= ~TCR_CONTC; - else - temp |= TCR_CONTC; + if (!fsl_lpspi->usedma) { + temp |= TCR_CONT; + if (fsl_lpspi->is_first_byte) + temp &= ~TCR_CONTC; + else + temp |= TCR_CONTC; + } } writel(temp, fsl_lpspi->base + IMX7ULP_TCR); @@ -228,7 +305,11 @@ static void fsl_lpspi_set_watermark(struct fsl_lpspi_data *fsl_lpspi) { u32 temp; - temp = fsl_lpspi->watermark >> 1 | (fsl_lpspi->watermark >> 1) << 16; + if (!fsl_lpspi->usedma) + temp = fsl_lpspi->watermark >> 1 | + (fsl_lpspi->watermark >> 1) << 16; + else + temp = fsl_lpspi->watermark >> 1; writel(temp, fsl_lpspi->base + IMX7ULP_FCR); @@ -241,7 +322,14 @@ static int fsl_lpspi_set_bitrate(struct fsl_lpspi_data *fsl_lpspi) unsigned int perclk_rate, scldiv; u8 prescale; - perclk_rate = clk_get_rate(fsl_lpspi->clk); + perclk_rate = clk_get_rate(fsl_lpspi->clk_per); + + if (config.speed_hz > perclk_rate / 2) { + dev_err(fsl_lpspi->dev, + "per-clk should be at least two times of transfer speed"); + return -EINVAL; + } + for (prescale = 0; prescale < 8; prescale++) { scldiv = perclk_rate / (clkdivs[prescale] * config.speed_hz) - 2; @@ -257,12 +345,59 @@ static int fsl_lpspi_set_bitrate(struct fsl_lpspi_data *fsl_lpspi) writel(scldiv | (scldiv << 8) | ((scldiv >> 1) << 16), fsl_lpspi->base + IMX7ULP_CCR); - dev_dbg(fsl_lpspi->dev, "perclk=%d, speed=%d, prescale =%d, scldiv=%d\n", + dev_dbg(fsl_lpspi->dev, "perclk=%d, speed=%d, prescale=%d, scldiv=%d\n", perclk_rate, config.speed_hz, prescale, scldiv); return 0; } +static int fsl_lpspi_dma_configure(struct spi_controller *controller) +{ + int ret; + enum dma_slave_buswidth buswidth; + struct dma_slave_config rx = {}, tx = {}; + struct fsl_lpspi_data *fsl_lpspi = + spi_controller_get_devdata(controller); + + switch (fsl_lpspi_bytes_per_word(fsl_lpspi->config.bpw)) { + case 4: + buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES; + break; + case 2: + buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES; + break; + case 1: + buswidth = DMA_SLAVE_BUSWIDTH_1_BYTE; + break; + default: + return -EINVAL; + } + + tx.direction = DMA_MEM_TO_DEV; + tx.dst_addr = fsl_lpspi->base_phys + IMX7ULP_TDR; + tx.dst_addr_width = buswidth; + tx.dst_maxburst = 1; + ret = dmaengine_slave_config(controller->dma_tx, &tx); + if (ret) { + dev_err(fsl_lpspi->dev, "TX dma configuration failed with %d\n", + ret); + return ret; + } + + rx.direction = DMA_DEV_TO_MEM; + rx.src_addr = fsl_lpspi->base_phys + IMX7ULP_RDR; + rx.src_addr_width = buswidth; + rx.src_maxburst = 1; + ret = dmaengine_slave_config(controller->dma_rx, &rx); + if (ret) { + dev_err(fsl_lpspi->dev, "RX dma configuration failed with %d\n", + ret); + return ret; + } + + return 0; +} + static int fsl_lpspi_config(struct fsl_lpspi_data *fsl_lpspi) { u32 temp; @@ -288,18 +423,27 @@ static int fsl_lpspi_config(struct fsl_lpspi_data *fsl_lpspi) temp |= CR_RRF | CR_RTF | CR_MEN; writel(temp, fsl_lpspi->base + IMX7ULP_CR); + temp = 0; + if (fsl_lpspi->usedma) + temp = DER_TDDE | DER_RDDE; + writel(temp, fsl_lpspi->base + IMX7ULP_DER); + return 0; } -static void fsl_lpspi_setup_transfer(struct spi_device *spi, +static int fsl_lpspi_setup_transfer(struct spi_controller *controller, + struct spi_device *spi, struct spi_transfer *t) { struct fsl_lpspi_data *fsl_lpspi = spi_controller_get_devdata(spi->controller); + if (t == NULL) + return -EINVAL; + fsl_lpspi->config.mode = spi->mode; - fsl_lpspi->config.bpw = t ? t->bits_per_word : spi->bits_per_word; - fsl_lpspi->config.speed_hz = t ? t->speed_hz : spi->max_speed_hz; + fsl_lpspi->config.bpw = t->bits_per_word; + fsl_lpspi->config.speed_hz = t->speed_hz; fsl_lpspi->config.chip_select = spi->chip_select; if (!fsl_lpspi->config.speed_hz) @@ -324,7 +468,12 @@ static void fsl_lpspi_setup_transfer(struct spi_device *spi, else fsl_lpspi->watermark = fsl_lpspi->txfifosize; - fsl_lpspi_config(fsl_lpspi); + if (fsl_lpspi_can_dma(controller, spi, t)) + fsl_lpspi->usedma = 1; + else + fsl_lpspi->usedma = 0; + + return fsl_lpspi_config(fsl_lpspi); } static int fsl_lpspi_slave_abort(struct spi_controller *controller) @@ -333,7 +482,13 @@ static int fsl_lpspi_slave_abort(struct spi_controller *controller) spi_controller_get_devdata(controller); fsl_lpspi->slave_aborted = true; - complete(&fsl_lpspi->xfer_done); + if (!fsl_lpspi->usedma) + complete(&fsl_lpspi->xfer_done); + else { + complete(&fsl_lpspi->dma_tx_completion); + complete(&fsl_lpspi->dma_rx_completion); + } + return 0; } @@ -362,8 +517,10 @@ static int fsl_lpspi_reset(struct fsl_lpspi_data *fsl_lpspi) { u32 temp; - /* Disable all interrupt */ - fsl_lpspi_intctrl(fsl_lpspi, 0); + if (!fsl_lpspi->usedma) { + /* Disable all interrupt */ + fsl_lpspi_intctrl(fsl_lpspi, 0); + } /* W1C for all flags in SR */ temp = 0x3F << 8; @@ -376,8 +533,177 @@ static int fsl_lpspi_reset(struct fsl_lpspi_data *fsl_lpspi) return 0; } -static int fsl_lpspi_transfer_one(struct spi_controller *controller, - struct spi_device *spi, +static void fsl_lpspi_dma_rx_callback(void *cookie) +{ + struct fsl_lpspi_data *fsl_lpspi = (struct fsl_lpspi_data *)cookie; + + complete(&fsl_lpspi->dma_rx_completion); +} + +static void fsl_lpspi_dma_tx_callback(void *cookie) +{ + struct fsl_lpspi_data *fsl_lpspi = (struct fsl_lpspi_data *)cookie; + + complete(&fsl_lpspi->dma_tx_completion); +} + +static int fsl_lpspi_calculate_timeout(struct fsl_lpspi_data *fsl_lpspi, + int size) +{ + unsigned long timeout = 0; + + /* Time with actual data transfer and CS change delay related to HW */ + timeout = (8 + 4) * size / fsl_lpspi->config.speed_hz; + + /* Add extra second for scheduler related activities */ + timeout += 1; + + /* Double calculated timeout */ + return msecs_to_jiffies(2 * timeout * MSEC_PER_SEC); +} + +static int fsl_lpspi_dma_transfer(struct spi_controller *controller, + struct fsl_lpspi_data *fsl_lpspi, + struct spi_transfer *transfer) +{ + struct dma_async_tx_descriptor *desc_tx, *desc_rx; + unsigned long transfer_timeout; + unsigned long timeout; + struct sg_table *tx = &transfer->tx_sg, *rx = &transfer->rx_sg; + int ret; + + ret = fsl_lpspi_dma_configure(controller); + if (ret) + return ret; + + desc_rx = dmaengine_prep_slave_sg(controller->dma_rx, + rx->sgl, rx->nents, DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc_rx) + return -EINVAL; + + desc_rx->callback = fsl_lpspi_dma_rx_callback; + desc_rx->callback_param = (void *)fsl_lpspi; + dmaengine_submit(desc_rx); + reinit_completion(&fsl_lpspi->dma_rx_completion); + dma_async_issue_pending(controller->dma_rx); + + desc_tx = dmaengine_prep_slave_sg(controller->dma_tx, + tx->sgl, tx->nents, DMA_MEM_TO_DEV, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc_tx) { + dmaengine_terminate_all(controller->dma_tx); + return -EINVAL; + } + + desc_tx->callback = fsl_lpspi_dma_tx_callback; + desc_tx->callback_param = (void *)fsl_lpspi; + dmaengine_submit(desc_tx); + reinit_completion(&fsl_lpspi->dma_tx_completion); + dma_async_issue_pending(controller->dma_tx); + + fsl_lpspi->slave_aborted = false; + + if (!fsl_lpspi->is_slave) { + transfer_timeout = fsl_lpspi_calculate_timeout(fsl_lpspi, + transfer->len); + + /* Wait eDMA to finish the data transfer.*/ + timeout = wait_for_completion_timeout(&fsl_lpspi->dma_tx_completion, + transfer_timeout); + if (!timeout) { + dev_err(fsl_lpspi->dev, "I/O Error in DMA TX\n"); + dmaengine_terminate_all(controller->dma_tx); + dmaengine_terminate_all(controller->dma_rx); + fsl_lpspi_reset(fsl_lpspi); + return -ETIMEDOUT; + } + + timeout = wait_for_completion_timeout(&fsl_lpspi->dma_rx_completion, + transfer_timeout); + if (!timeout) { + dev_err(fsl_lpspi->dev, "I/O Error in DMA RX\n"); + dmaengine_terminate_all(controller->dma_tx); + dmaengine_terminate_all(controller->dma_rx); + fsl_lpspi_reset(fsl_lpspi); + return -ETIMEDOUT; + } + } else { + if (wait_for_completion_interruptible(&fsl_lpspi->dma_tx_completion) || + fsl_lpspi->slave_aborted) { + dev_dbg(fsl_lpspi->dev, + "I/O Error in DMA TX interrupted\n"); + dmaengine_terminate_all(controller->dma_tx); + dmaengine_terminate_all(controller->dma_rx); + fsl_lpspi_reset(fsl_lpspi); + return -EINTR; + } + + if (wait_for_completion_interruptible(&fsl_lpspi->dma_rx_completion) || + fsl_lpspi->slave_aborted) { + dev_dbg(fsl_lpspi->dev, + "I/O Error in DMA RX interrupted\n"); + dmaengine_terminate_all(controller->dma_tx); + dmaengine_terminate_all(controller->dma_rx); + fsl_lpspi_reset(fsl_lpspi); + return -EINTR; + } + } + + fsl_lpspi_reset(fsl_lpspi); + + return 0; +} + +static void fsl_lpspi_dma_exit(struct spi_controller *controller) +{ + if (controller->dma_rx) { + dma_release_channel(controller->dma_rx); + controller->dma_rx = NULL; + } + + if (controller->dma_tx) { + dma_release_channel(controller->dma_tx); + controller->dma_tx = NULL; + } +} + +static int fsl_lpspi_dma_init(struct device *dev, + struct fsl_lpspi_data *fsl_lpspi, + struct spi_controller *controller) +{ + int ret; + + /* Prepare for TX DMA: */ + controller->dma_tx = dma_request_slave_channel_reason(dev, "tx"); + if (IS_ERR(controller->dma_tx)) { + ret = PTR_ERR(controller->dma_tx); + dev_dbg(dev, "can't get the TX DMA channel, error %d!\n", ret); + controller->dma_tx = NULL; + goto err; + } + + /* Prepare for RX DMA: */ + controller->dma_rx = dma_request_slave_channel_reason(dev, "rx"); + if (IS_ERR(controller->dma_rx)) { + ret = PTR_ERR(controller->dma_rx); + dev_dbg(dev, "can't get the RX DMA channel, error %d\n", ret); + controller->dma_rx = NULL; + goto err; + } + + init_completion(&fsl_lpspi->dma_rx_completion); + init_completion(&fsl_lpspi->dma_tx_completion); + controller->can_dma = fsl_lpspi_can_dma; + controller->max_dma_len = FSL_LPSPI_MAX_EDMA_BYTES; + + return 0; +err: + fsl_lpspi_dma_exit(controller); + return ret; +} + +static int fsl_lpspi_pio_transfer(struct spi_controller *controller, struct spi_transfer *t) { struct fsl_lpspi_data *fsl_lpspi = @@ -402,37 +728,30 @@ static int fsl_lpspi_transfer_one(struct spi_controller *controller, return 0; } -static int fsl_lpspi_transfer_one_msg(struct spi_controller *controller, - struct spi_message *msg) +static int fsl_lpspi_transfer_one(struct spi_controller *controller, + struct spi_device *spi, + struct spi_transfer *t) { struct fsl_lpspi_data *fsl_lpspi = - spi_controller_get_devdata(controller); - struct spi_device *spi = msg->spi; - struct spi_transfer *xfer; - bool is_first_xfer = true; - int ret = 0; - - msg->status = 0; - msg->actual_length = 0; - - list_for_each_entry(xfer, &msg->transfers, transfer_list) { - fsl_lpspi_setup_transfer(spi, xfer); - fsl_lpspi_set_cmd(fsl_lpspi, is_first_xfer); - - is_first_xfer = false; + spi_controller_get_devdata(controller); + int ret; - ret = fsl_lpspi_transfer_one(controller, spi, xfer); - if (ret < 0) - goto complete; + fsl_lpspi->is_first_byte = true; + ret = fsl_lpspi_setup_transfer(controller, spi, t); + if (ret < 0) + return ret; - msg->actual_length += xfer->len; - } + fsl_lpspi_set_cmd(fsl_lpspi); + fsl_lpspi->is_first_byte = false; -complete: - msg->status = ret; - spi_finalize_current_message(controller); + if (fsl_lpspi->usedma) + ret = fsl_lpspi_dma_transfer(controller, fsl_lpspi, t); + else + ret = fsl_lpspi_pio_transfer(controller, t); + if (ret < 0) + return ret; - return ret; + return 0; } static irqreturn_t fsl_lpspi_isr(int irq, void *dev_id) @@ -452,7 +771,7 @@ static irqreturn_t fsl_lpspi_isr(int irq, void *dev_id) } if (temp_SR & SR_MBF || - readl(fsl_lpspi->base + IMX7ULP_FSR) & FSR_RXCOUNT) { + readl(fsl_lpspi->base + IMX7ULP_FSR) & FSR_TXCOUNT) { writel(SR_FCF, fsl_lpspi->base + IMX7ULP_SR); fsl_lpspi_intctrl(fsl_lpspi, IER_FCIE); return IRQ_HANDLED; @@ -467,15 +786,67 @@ static irqreturn_t fsl_lpspi_isr(int irq, void *dev_id) return IRQ_NONE; } +#ifdef CONFIG_PM +static int fsl_lpspi_runtime_resume(struct device *dev) +{ + struct spi_controller *controller = dev_get_drvdata(dev); + struct fsl_lpspi_data *fsl_lpspi; + int ret; + + fsl_lpspi = spi_controller_get_devdata(controller); + + ret = clk_prepare_enable(fsl_lpspi->clk_per); + if (ret) + return ret; + + ret = clk_prepare_enable(fsl_lpspi->clk_ipg); + if (ret) { + clk_disable_unprepare(fsl_lpspi->clk_per); + return ret; + } + + return 0; +} + +static int fsl_lpspi_runtime_suspend(struct device *dev) +{ + struct spi_controller *controller = dev_get_drvdata(dev); + struct fsl_lpspi_data *fsl_lpspi; + + fsl_lpspi = spi_controller_get_devdata(controller); + + clk_disable_unprepare(fsl_lpspi->clk_per); + clk_disable_unprepare(fsl_lpspi->clk_ipg); + + return 0; +} +#endif + +static int fsl_lpspi_init_rpm(struct fsl_lpspi_data *fsl_lpspi) +{ + struct device *dev = fsl_lpspi->dev; + + pm_runtime_enable(dev); + pm_runtime_set_autosuspend_delay(dev, FSL_LPSPI_RPM_TIMEOUT); + pm_runtime_use_autosuspend(dev); + + return 0; +} + static int fsl_lpspi_probe(struct platform_device *pdev) { + struct device_node *np = pdev->dev.of_node; struct fsl_lpspi_data *fsl_lpspi; struct spi_controller *controller; + struct spi_imx_master *lpspi_platform_info = + dev_get_platdata(&pdev->dev); struct resource *res; - int ret, irq; + int i, ret, irq; u32 temp; + bool is_slave; - if (of_property_read_bool((&pdev->dev)->of_node, "spi-slave")) + is_slave = of_property_read_bool((&pdev->dev)->of_node, "spi-slave"); + if (is_slave) controller = spi_alloc_slave(&pdev->dev, sizeof(struct fsl_lpspi_data)); else @@ -487,15 +858,35 @@ static int fsl_lpspi_probe(struct platform_device *pdev) platform_set_drvdata(pdev, controller); - controller->bits_per_word_mask = SPI_BPW_RANGE_MASK(8, 32); - controller->bus_num = pdev->id; - fsl_lpspi = spi_controller_get_devdata(controller); fsl_lpspi->dev = &pdev->dev; - fsl_lpspi->is_slave = of_property_read_bool((&pdev->dev)->of_node, - "spi-slave"); + fsl_lpspi->is_slave = is_slave; - controller->transfer_one_message = fsl_lpspi_transfer_one_msg; + if (!fsl_lpspi->is_slave) { + for (i = 0; i < controller->num_chipselect; i++) { + int cs_gpio = of_get_named_gpio(np, "cs-gpios", i); + + if (!gpio_is_valid(cs_gpio) && lpspi_platform_info) + cs_gpio = lpspi_platform_info->chipselect[i]; + + fsl_lpspi->chipselect[i] = cs_gpio; + if (!gpio_is_valid(cs_gpio)) + continue; + + ret = devm_gpio_request(&pdev->dev, + fsl_lpspi->chipselect[i], + DRIVER_NAME); + if (ret) { + dev_err(&pdev->dev, "can't get cs gpios\n"); + goto out_controller_put; + } + } + controller->cs_gpios = fsl_lpspi->chipselect; + controller->prepare_message = fsl_lpspi_prepare_message; + } + + controller->bits_per_word_mask = SPI_BPW_RANGE_MASK(8, 32); + controller->transfer_one = fsl_lpspi_transfer_one; controller->prepare_transfer_hardware = lpspi_prepare_xfer_hardware; controller->unprepare_transfer_hardware = lpspi_unprepare_xfer_hardware; controller->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; @@ -512,6 +903,7 @@ static int fsl_lpspi_probe(struct platform_device *pdev) ret = PTR_ERR(fsl_lpspi->base); goto out_controller_put; } + fsl_lpspi->base_phys = res->start; irq = platform_get_irq(pdev, 0); if (irq < 0) { @@ -526,23 +918,39 @@ static int fsl_lpspi_probe(struct platform_device *pdev) goto out_controller_put; } - fsl_lpspi->clk = devm_clk_get(&pdev->dev, "ipg"); - if (IS_ERR(fsl_lpspi->clk)) { - ret = PTR_ERR(fsl_lpspi->clk); + fsl_lpspi->clk_per = devm_clk_get(&pdev->dev, "per"); + if (IS_ERR(fsl_lpspi->clk_per)) { + ret = PTR_ERR(fsl_lpspi->clk_per); goto out_controller_put; } - ret = clk_prepare_enable(fsl_lpspi->clk); - if (ret) { - dev_err(&pdev->dev, "can't enable lpspi clock, ret=%d\n", ret); + fsl_lpspi->clk_ipg = devm_clk_get(&pdev->dev, "ipg"); + if (IS_ERR(fsl_lpspi->clk_ipg)) { + ret = PTR_ERR(fsl_lpspi->clk_ipg); + goto out_controller_put; + } + + /* enable the clock */ + ret = fsl_lpspi_init_rpm(fsl_lpspi); + if (ret) goto out_controller_put; + + ret = pm_runtime_get_sync(fsl_lpspi->dev); + if (ret < 0) { + dev_err(fsl_lpspi->dev, "failed to enable clock\n"); + return ret; } temp = readl(fsl_lpspi->base + IMX7ULP_PARAM); fsl_lpspi->txfifosize = 1 << (temp & 0x0f); fsl_lpspi->rxfifosize = 1 << ((temp >> 8) & 0x0f); - clk_disable_unprepare(fsl_lpspi->clk); + ret = fsl_lpspi_dma_init(&pdev->dev, fsl_lpspi, controller); + if (ret == -EPROBE_DEFER) + goto out_controller_put; + + if (ret < 0) + dev_err(&pdev->dev, "dma setup error %d, use pio\n", ret); ret = devm_spi_register_controller(&pdev->dev, controller); if (ret < 0) { @@ -564,15 +972,50 @@ static int fsl_lpspi_remove(struct platform_device *pdev) struct fsl_lpspi_data *fsl_lpspi = spi_controller_get_devdata(controller); - clk_disable_unprepare(fsl_lpspi->clk); + pm_runtime_disable(fsl_lpspi->dev); + + spi_master_put(controller); return 0; } +#ifdef CONFIG_PM_SLEEP +static int fsl_lpspi_suspend(struct device *dev) +{ + int ret; + + pinctrl_pm_select_sleep_state(dev); + ret = pm_runtime_force_suspend(dev); + return ret; +} + +static int fsl_lpspi_resume(struct device *dev) +{ + int ret; + + ret = pm_runtime_force_resume(dev); + if (ret) { + dev_err(dev, "Error in resume: %d\n", ret); + return ret; + } + + pinctrl_pm_select_default_state(dev); + + return 0; +} +#endif /* CONFIG_PM_SLEEP */ + +static const struct dev_pm_ops fsl_lpspi_pm_ops = { + SET_RUNTIME_PM_OPS(fsl_lpspi_runtime_suspend, + fsl_lpspi_runtime_resume, NULL) + SET_SYSTEM_SLEEP_PM_OPS(fsl_lpspi_suspend, fsl_lpspi_resume) +}; + static struct platform_driver fsl_lpspi_driver = { .driver = { .name = DRIVER_NAME, .of_match_table = fsl_lpspi_dt_ids, + .pm = &fsl_lpspi_pm_ops, }, .probe = fsl_lpspi_probe, .remove = fsl_lpspi_remove, diff --git a/drivers/spi/spi-fsl-qspi.c b/drivers/spi/spi-fsl-qspi.c index 6a713f78a62e..41a49b93ca60 100644 --- a/drivers/spi/spi-fsl-qspi.c +++ b/drivers/spi/spi-fsl-qspi.c @@ -882,7 +882,7 @@ static int fsl_qspi_probe(struct platform_device *pdev) ctlr->dev.of_node = np; - ret = spi_register_controller(ctlr); + ret = devm_spi_register_controller(dev, ctlr); if (ret) goto err_destroy_mutex; diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c index 8f2e97857e8b..b36ac6aa3b1f 100644 --- a/drivers/spi/spi-fsl-spi.c +++ b/drivers/spi/spi-fsl-spi.c @@ -39,6 +39,14 @@ #include <linux/spi/spi_bitbang.h> #include <linux/types.h> +#ifdef CONFIG_FSL_SOC +#include <sysdev/fsl_soc.h> +#endif + +/* Specific to the MPC8306/MPC8309 */ +#define IMMR_SPI_CS_OFFSET 0x14c +#define SPI_BOOT_SEL_BIT 0x80000000 + #include "spi-fsl-lib.h" #include "spi-fsl-cpm.h" #include "spi-fsl-spi.h" @@ -355,33 +363,50 @@ static int fsl_spi_bufs(struct spi_device *spi, struct spi_transfer *t, static int fsl_spi_do_one_msg(struct spi_master *master, struct spi_message *m) { + struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(master); struct spi_device *spi = m->spi; struct spi_transfer *t, *first; unsigned int cs_change; const int nsecs = 50; - int status; + int status, last_bpw; + + /* + * In CPU mode, optimize large byte transfers to use larger + * bits_per_word values to reduce number of interrupts taken. + */ + if (!(mpc8xxx_spi->flags & SPI_CPM_MODE)) { + list_for_each_entry(t, &m->transfers, transfer_list) { + if (t->len < 256 || t->bits_per_word != 8) + continue; + if ((t->len & 3) == 0) + t->bits_per_word = 32; + else if ((t->len & 1) == 0) + t->bits_per_word = 16; + } + } /* Don't allow changes if CS is active */ - first = list_first_entry(&m->transfers, struct spi_transfer, - transfer_list); + cs_change = 1; list_for_each_entry(t, &m->transfers, transfer_list) { - if ((first->bits_per_word != t->bits_per_word) || - (first->speed_hz != t->speed_hz)) { + if (cs_change) + first = t; + cs_change = t->cs_change; + if (first->speed_hz != t->speed_hz) { dev_err(&spi->dev, - "bits_per_word/speed_hz should be same for the same SPI transfer\n"); + "speed_hz cannot change while CS is active\n"); return -EINVAL; } } + last_bpw = -1; cs_change = 1; status = -EINVAL; list_for_each_entry(t, &m->transfers, transfer_list) { - if (t->bits_per_word || t->speed_hz) { - if (cs_change) - status = fsl_spi_setup_transfer(spi, t); - if (status < 0) - break; - } + if (cs_change || last_bpw != t->bits_per_word) + status = fsl_spi_setup_transfer(spi, t); + if (status < 0) + break; + last_bpw = t->bits_per_word; if (cs_change) { fsl_spi_chipselect(spi, BITBANG_CS_ACTIVE); @@ -701,10 +726,17 @@ static void fsl_spi_cs_control(struct spi_device *spi, bool on) struct fsl_spi_platform_data *pdata = dev_get_platdata(dev); struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(pdata); u16 cs = spi->chip_select; - int gpio = pinfo->gpios[cs]; - bool alow = pinfo->alow_flags[cs]; - gpio_set_value(gpio, on ^ alow); + if (cs < pinfo->ngpios) { + int gpio = pinfo->gpios[cs]; + bool alow = pinfo->alow_flags[cs]; + + gpio_set_value(gpio, on ^ alow); + } else { + if (WARN_ON_ONCE(cs > pinfo->ngpios || !pinfo->immr_spi_cs)) + return; + iowrite32be(on ? SPI_BOOT_SEL_BIT : 0, pinfo->immr_spi_cs); + } } static int of_fsl_spi_get_chipselects(struct device *dev) @@ -712,12 +744,15 @@ static int of_fsl_spi_get_chipselects(struct device *dev) struct device_node *np = dev->of_node; struct fsl_spi_platform_data *pdata = dev_get_platdata(dev); struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(pdata); + bool spisel_boot = IS_ENABLED(CONFIG_FSL_SOC) && + of_property_read_bool(np, "fsl,spisel_boot"); int ngpios; int i = 0; int ret; ngpios = of_gpio_count(np); - if (ngpios <= 0) { + ngpios = max(ngpios, 0); + if (ngpios == 0 && !spisel_boot) { /* * SPI w/o chip-select line. One SPI device is still permitted * though. @@ -726,6 +761,7 @@ static int of_fsl_spi_get_chipselects(struct device *dev) return 0; } + pinfo->ngpios = ngpios; pinfo->gpios = kmalloc_array(ngpios, sizeof(*pinfo->gpios), GFP_KERNEL); if (!pinfo->gpios) @@ -769,7 +805,18 @@ static int of_fsl_spi_get_chipselects(struct device *dev) } } - pdata->max_chipselect = ngpios; +#if IS_ENABLED(CONFIG_FSL_SOC) + if (spisel_boot) { + pinfo->immr_spi_cs = ioremap(get_immrbase() + IMMR_SPI_CS_OFFSET, 4); + if (!pinfo->immr_spi_cs) { + ret = -ENOMEM; + i = ngpios - 1; + goto err_loop; + } + } +#endif + + pdata->max_chipselect = ngpios + spisel_boot; pdata->cs_control = fsl_spi_cs_control; return 0; diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c index 53b35c56a557..487ee55d26f7 100644 --- a/drivers/spi/spi-gpio.c +++ b/drivers/spi/spi-gpio.c @@ -35,20 +35,16 @@ * platform_device->driver_data ... points to spi_gpio * * spi->controller_state ... reserved for bitbang framework code - * spi->controller_data ... holds chipselect GPIO * * spi->master->dev.driver_data ... points to spi_gpio->bitbang */ struct spi_gpio { struct spi_bitbang bitbang; - struct spi_gpio_platform_data pdata; - struct platform_device *pdev; struct gpio_desc *sck; struct gpio_desc *miso; struct gpio_desc *mosi; struct gpio_desc **cs_gpios; - bool has_cs; }; /*----------------------------------------------------------------------*/ @@ -96,12 +92,6 @@ spi_to_spi_gpio(const struct spi_device *spi) return spi_gpio; } -static inline struct spi_gpio_platform_data *__pure -spi_to_pdata(const struct spi_device *spi) -{ - return &spi_to_spi_gpio(spi)->pdata; -} - /* These helpers are in turn called by the bitbang inlines */ static inline void setsck(const struct spi_device *spi, int is_on) { @@ -224,7 +214,7 @@ static void spi_gpio_chipselect(struct spi_device *spi, int is_active) gpiod_set_value_cansleep(spi_gpio->sck, spi->mode & SPI_CPOL); /* Drive chip select line, if we have one */ - if (spi_gpio->has_cs) { + if (spi_gpio->cs_gpios) { struct gpio_desc *cs = spi_gpio->cs_gpios[spi->chip_select]; /* SPI chip selects are normally active-low */ @@ -242,10 +232,12 @@ static int spi_gpio_setup(struct spi_device *spi) * The CS GPIOs have already been * initialized from the descriptor lookup. */ - cs = spi_gpio->cs_gpios[spi->chip_select]; - if (!spi->controller_state && cs) - status = gpiod_direction_output(cs, - !(spi->mode & SPI_CS_HIGH)); + if (spi_gpio->cs_gpios) { + cs = spi_gpio->cs_gpios[spi->chip_select]; + if (!spi->controller_state && cs) + status = gpiod_direction_output(cs, + !(spi->mode & SPI_CS_HIGH)); + } if (!status) status = spi_bitbang_setup(spi); @@ -296,40 +288,20 @@ static void spi_gpio_cleanup(struct spi_device *spi) * floating signals. (A weak pulldown would save power too, but many * drivers expect to see all-ones data as the no slave "response".) */ -static int spi_gpio_request(struct device *dev, - struct spi_gpio *spi_gpio, - unsigned int num_chipselects, - u16 *mflags) +static int spi_gpio_request(struct device *dev, struct spi_gpio *spi_gpio) { - int i; - spi_gpio->mosi = devm_gpiod_get_optional(dev, "mosi", GPIOD_OUT_LOW); if (IS_ERR(spi_gpio->mosi)) return PTR_ERR(spi_gpio->mosi); - if (!spi_gpio->mosi) - /* HW configuration without MOSI pin */ - *mflags |= SPI_MASTER_NO_TX; spi_gpio->miso = devm_gpiod_get_optional(dev, "miso", GPIOD_IN); if (IS_ERR(spi_gpio->miso)) return PTR_ERR(spi_gpio->miso); - /* - * No setting SPI_MASTER_NO_RX here - if there is only a MOSI - * pin connected the host can still do RX by changing the - * direction of the line. - */ spi_gpio->sck = devm_gpiod_get(dev, "sck", GPIOD_OUT_LOW); if (IS_ERR(spi_gpio->sck)) return PTR_ERR(spi_gpio->sck); - for (i = 0; i < num_chipselects; i++) { - spi_gpio->cs_gpios[i] = devm_gpiod_get_index(dev, "cs", - i, GPIOD_OUT_HIGH); - if (IS_ERR(spi_gpio->cs_gpios[i])) - return PTR_ERR(spi_gpio->cs_gpios[i]); - } - return 0; } @@ -340,142 +312,134 @@ static const struct of_device_id spi_gpio_dt_ids[] = { }; MODULE_DEVICE_TABLE(of, spi_gpio_dt_ids); -static int spi_gpio_probe_dt(struct platform_device *pdev) +static int spi_gpio_probe_dt(struct platform_device *pdev, + struct spi_master *master) { - int ret; - u32 tmp; - struct spi_gpio_platform_data *pdata; - struct device_node *np = pdev->dev.of_node; - const struct of_device_id *of_id = - of_match_device(spi_gpio_dt_ids, &pdev->dev); - - if (!of_id) - return 0; + master->dev.of_node = pdev->dev.of_node; + master->use_gpio_descriptors = true; - pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); - if (!pdata) - return -ENOMEM; + return 0; +} +#else +static inline int spi_gpio_probe_dt(struct platform_device *pdev, + struct spi_master *master) +{ + return 0; +} +#endif +static int spi_gpio_probe_pdata(struct platform_device *pdev, + struct spi_master *master) +{ + struct device *dev = &pdev->dev; + struct spi_gpio_platform_data *pdata = dev_get_platdata(dev); + struct spi_gpio *spi_gpio = spi_master_get_devdata(master); + int i; - ret = of_property_read_u32(np, "num-chipselects", &tmp); - if (ret < 0) { - dev_err(&pdev->dev, "num-chipselects property not found\n"); - goto error_free; - } +#ifdef GENERIC_BITBANG + if (!pdata || !pdata->num_chipselect) + return -ENODEV; +#endif + /* + * The master needs to think there is a chipselect even if not + * connected + */ + master->num_chipselect = pdata->num_chipselect ?: 1; - pdata->num_chipselect = tmp; - pdev->dev.platform_data = pdata; + spi_gpio->cs_gpios = devm_kcalloc(dev, master->num_chipselect, + sizeof(*spi_gpio->cs_gpios), + GFP_KERNEL); + if (!spi_gpio->cs_gpios) + return -ENOMEM; - return 1; + for (i = 0; i < master->num_chipselect; i++) { + spi_gpio->cs_gpios[i] = devm_gpiod_get_index(dev, "cs", i, + GPIOD_OUT_HIGH); + if (IS_ERR(spi_gpio->cs_gpios[i])) + return PTR_ERR(spi_gpio->cs_gpios[i]); + } -error_free: - devm_kfree(&pdev->dev, pdata); - return ret; + return 0; } -#else -static inline int spi_gpio_probe_dt(struct platform_device *pdev) + +static void spi_gpio_put(void *data) { - return 0; + spi_master_put(data); } -#endif static int spi_gpio_probe(struct platform_device *pdev) { int status; struct spi_master *master; struct spi_gpio *spi_gpio; - struct spi_gpio_platform_data *pdata; - u16 master_flags = 0; - bool use_of = 0; + struct device *dev = &pdev->dev; + struct spi_bitbang *bb; + const struct of_device_id *of_id; - status = spi_gpio_probe_dt(pdev); - if (status < 0) - return status; - if (status > 0) - use_of = 1; - - pdata = dev_get_platdata(&pdev->dev); -#ifdef GENERIC_BITBANG - if (!pdata || (!use_of && !pdata->num_chipselect)) - return -ENODEV; -#endif + of_id = of_match_device(spi_gpio_dt_ids, &pdev->dev); - master = spi_alloc_master(&pdev->dev, sizeof(*spi_gpio)); + master = spi_alloc_master(dev, sizeof(*spi_gpio)); if (!master) return -ENOMEM; - spi_gpio = spi_master_get_devdata(master); - - spi_gpio->cs_gpios = devm_kcalloc(&pdev->dev, - pdata->num_chipselect, - sizeof(*spi_gpio->cs_gpios), - GFP_KERNEL); - if (!spi_gpio->cs_gpios) - return -ENOMEM; + status = devm_add_action_or_reset(&pdev->dev, spi_gpio_put, master); + if (status) + return status; - platform_set_drvdata(pdev, spi_gpio); + if (of_id) + status = spi_gpio_probe_dt(pdev, master); + else + status = spi_gpio_probe_pdata(pdev, master); - /* Determine if we have chip selects connected */ - spi_gpio->has_cs = !!pdata->num_chipselect; + if (status) + return status; - spi_gpio->pdev = pdev; - if (pdata) - spi_gpio->pdata = *pdata; + spi_gpio = spi_master_get_devdata(master); - status = spi_gpio_request(&pdev->dev, spi_gpio, - pdata->num_chipselect, &master_flags); + status = spi_gpio_request(dev, spi_gpio); if (status) return status; master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32); master->mode_bits = SPI_3WIRE | SPI_3WIRE_HIZ | SPI_CPHA | SPI_CPOL | SPI_CS_HIGH; - master->flags = master_flags; + if (!spi_gpio->mosi) { + /* HW configuration without MOSI pin + * + * No setting SPI_MASTER_NO_RX here - if there is only + * a MOSI pin connected the host can still do RX by + * changing the direction of the line. + */ + master->flags = SPI_MASTER_NO_TX; + } + master->bus_num = pdev->id; - /* The master needs to think there is a chipselect even if not connected */ - master->num_chipselect = spi_gpio->has_cs ? pdata->num_chipselect : 1; master->setup = spi_gpio_setup; master->cleanup = spi_gpio_cleanup; -#ifdef CONFIG_OF - master->dev.of_node = pdev->dev.of_node; -#endif - spi_gpio->bitbang.master = master; - spi_gpio->bitbang.chipselect = spi_gpio_chipselect; - spi_gpio->bitbang.set_line_direction = spi_gpio_set_direction; + bb = &spi_gpio->bitbang; + bb->master = master; + bb->chipselect = spi_gpio_chipselect; + bb->set_line_direction = spi_gpio_set_direction; - if ((master_flags & SPI_MASTER_NO_TX) == 0) { - spi_gpio->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_word_mode0; - spi_gpio->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_word_mode1; - spi_gpio->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_word_mode2; - spi_gpio->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_txrx_word_mode3; + if (master->flags & SPI_MASTER_NO_TX) { + bb->txrx_word[SPI_MODE_0] = spi_gpio_spec_txrx_word_mode0; + bb->txrx_word[SPI_MODE_1] = spi_gpio_spec_txrx_word_mode1; + bb->txrx_word[SPI_MODE_2] = spi_gpio_spec_txrx_word_mode2; + bb->txrx_word[SPI_MODE_3] = spi_gpio_spec_txrx_word_mode3; } else { - spi_gpio->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_spec_txrx_word_mode0; - spi_gpio->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_spec_txrx_word_mode1; - spi_gpio->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_spec_txrx_word_mode2; - spi_gpio->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_spec_txrx_word_mode3; + bb->txrx_word[SPI_MODE_0] = spi_gpio_txrx_word_mode0; + bb->txrx_word[SPI_MODE_1] = spi_gpio_txrx_word_mode1; + bb->txrx_word[SPI_MODE_2] = spi_gpio_txrx_word_mode2; + bb->txrx_word[SPI_MODE_3] = spi_gpio_txrx_word_mode3; } - spi_gpio->bitbang.setup_transfer = spi_bitbang_setup_transfer; + bb->setup_transfer = spi_bitbang_setup_transfer; - status = spi_bitbang_start(&spi_gpio->bitbang); + status = spi_bitbang_init(&spi_gpio->bitbang); if (status) - spi_master_put(master); - - return status; -} - -static int spi_gpio_remove(struct platform_device *pdev) -{ - struct spi_gpio *spi_gpio; - - spi_gpio = platform_get_drvdata(pdev); - - /* stop() unregisters child devices too */ - spi_bitbang_stop(&spi_gpio->bitbang); - - spi_master_put(spi_gpio->bitbang.master); + return status; - return 0; + return devm_spi_register_master(&pdev->dev, spi_master_get(master)); } MODULE_ALIAS("platform:" DRIVER_NAME); @@ -486,7 +450,6 @@ static struct platform_driver spi_gpio_driver = { .of_match_table = of_match_ptr(spi_gpio_dt_ids), }, .probe = spi_gpio_probe, - .remove = spi_gpio_remove, }; module_platform_driver(spi_gpio_driver); diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index 6ec647bbba77..09c9a1edb2c6 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -28,6 +28,10 @@ #define DRIVER_NAME "spi_imx" +static bool use_dma = true; +module_param(use_dma, bool, 0644); +MODULE_PARM_DESC(use_dma, "Enable usage of DMA when available (default)"); + #define MXC_CSPIRXDATA 0x00 #define MXC_CSPITXDATA 0x04 #define MXC_CSPICTRL 0x08 @@ -219,6 +223,9 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi, { struct spi_imx_data *spi_imx = spi_master_get_devdata(master); + if (!use_dma) + return false; + if (!master->dma_rx) return false; @@ -1494,7 +1501,7 @@ static int spi_imx_transfer(struct spi_device *spi, /* flush rxfifo before transfer */ while (spi_imx->devtype_data->rx_available(spi_imx)) - spi_imx->rx(spi_imx); + readl(spi_imx->base + MXC_CSPIRXDATA); if (spi_imx->slave_mode) return spi_imx_pio_transfer_slave(spi, transfer); diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c index a4d8d19ecff9..9f0fa9f3116d 100644 --- a/drivers/spi/spi-mem.c +++ b/drivers/spi/spi-mem.c @@ -135,8 +135,8 @@ static int spi_check_buswidth_req(struct spi_mem *mem, u8 buswidth, bool tx) return -ENOTSUPP; } -static bool spi_mem_default_supports_op(struct spi_mem *mem, - const struct spi_mem_op *op) +bool spi_mem_default_supports_op(struct spi_mem *mem, + const struct spi_mem_op *op) { if (spi_check_buswidth_req(mem, op->cmd.buswidth, true)) return false; @@ -622,7 +622,7 @@ void devm_spi_mem_dirmap_destroy(struct device *dev, EXPORT_SYMBOL_GPL(devm_spi_mem_dirmap_destroy); /** - * spi_mem_dirmap_dirmap_read() - Read data through a direct mapping + * spi_mem_dirmap_read() - Read data through a direct mapping * @desc: direct mapping descriptor * @offs: offset to start reading from. Note that this is not an absolute * offset, but the offset within the direct mapping which already has @@ -668,7 +668,7 @@ ssize_t spi_mem_dirmap_read(struct spi_mem_dirmap_desc *desc, EXPORT_SYMBOL_GPL(spi_mem_dirmap_read); /** - * spi_mem_dirmap_dirmap_write() - Write data through a direct mapping + * spi_mem_dirmap_write() - Write data through a direct mapping * @desc: direct mapping descriptor * @offs: offset to start writing from. Note that this is not an absolute * offset, but the offset within the direct mapping which already has diff --git a/drivers/staging/mt7621-spi/spi-mt7621.c b/drivers/spi/spi-mt7621.c index b509f9fe3346..ae836114ee3d 100644 --- a/drivers/staging/mt7621-spi/spi-mt7621.c +++ b/drivers/spi/spi-mt7621.c @@ -1,15 +1,14 @@ // SPDX-License-Identifier: GPL-2.0 -/* - * spi-mt7621.c -- MediaTek MT7621 SPI controller driver - * - * Copyright (C) 2011 Sergiy <piratfm@gmail.com> - * Copyright (C) 2011-2013 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2014-2015 Felix Fietkau <nbd@nbd.name> - * - * Some parts are based on spi-orion.c: - * Author: Shadi Ammouri <shadi@marvell.com> - * Copyright (C) 2007-2008 Marvell Ltd. - */ +// +// spi-mt7621.c -- MediaTek MT7621 SPI controller driver +// +// Copyright (C) 2011 Sergiy <piratfm@gmail.com> +// Copyright (C) 2011-2013 Gabor Juhos <juhosg@openwrt.org> +// Copyright (C) 2014-2015 Felix Fietkau <nbd@nbd.name> +// +// Some parts are based on spi-orion.c: +// Author: Shadi Ammouri <shadi@marvell.com> +// Copyright (C) 2007-2008 Marvell Ltd. #include <linux/clk.h> #include <linux/delay.h> @@ -52,7 +51,7 @@ #define MT7621_LSB_FIRST BIT(3) struct mt7621_spi { - struct spi_master *master; + struct spi_controller *master; void __iomem *base; unsigned int sys_freq; unsigned int speed; @@ -64,7 +63,7 @@ struct mt7621_spi { static inline struct mt7621_spi *spidev_to_mt7621_spi(struct spi_device *spi) { - return spi_master_get_devdata(spi->master); + return spi_controller_get_devdata(spi->master); } static inline u32 mt7621_spi_read(struct mt7621_spi *rs, u32 reg) @@ -77,29 +76,25 @@ static inline void mt7621_spi_write(struct mt7621_spi *rs, u32 reg, u32 val) iowrite32(val, rs->base + reg); } -static void mt7621_spi_reset(struct mt7621_spi *rs) +static void mt7621_spi_set_cs(struct spi_device *spi, int enable) { - u32 master = mt7621_spi_read(rs, MT7621_SPI_MASTER); + struct mt7621_spi *rs = spidev_to_mt7621_spi(spi); + int cs = spi->chip_select; + u32 polar = 0; + u32 master; /* * Select SPI device 7, enable "more buffer mode" and disable * full-duplex (only half-duplex really works on this chip * reliably) */ + master = mt7621_spi_read(rs, MT7621_SPI_MASTER); master |= MASTER_RS_SLAVE_SEL | MASTER_MORE_BUFMODE; master &= ~MASTER_FULL_DUPLEX; - mt7621_spi_write(rs, MT7621_SPI_MASTER, master); - rs->pending_write = 0; -} -static void mt7621_spi_set_cs(struct spi_device *spi, int enable) -{ - struct mt7621_spi *rs = spidev_to_mt7621_spi(spi); - int cs = spi->chip_select; - u32 polar = 0; + rs->pending_write = 0; - mt7621_spi_reset(rs); if (enable) polar = BIT(cs); mt7621_spi_write(rs, MT7621_SPI_POLAR, polar); @@ -163,13 +158,14 @@ static inline int mt7621_spi_wait_till_ready(struct mt7621_spi *rs) static void mt7621_spi_read_half_duplex(struct mt7621_spi *rs, int rx_len, u8 *buf) { + int tx_len; + /* * Combine with any pending write, and perform one or more half-duplex * transactions reading 'len' bytes. Data to be written is already in * MT7621_SPI_DATA. */ - int tx_len = rs->pending_write; - + tx_len = rs->pending_write; rs->pending_write = 0; while (rx_len || tx_len) { @@ -209,8 +205,8 @@ static inline void mt7621_spi_flush(struct mt7621_spi *rs) static void mt7621_spi_write_half_duplex(struct mt7621_spi *rs, int tx_len, const u8 *buf) { - int val = 0; int len = rs->pending_write; + int val = 0; if (len & 3) { val = mt7621_spi_read(rs, MT7621_SPI_OPCODE + (len & ~3)); @@ -238,6 +234,7 @@ static void mt7621_spi_write_half_duplex(struct mt7621_spi *rs, } tx_len -= 1; } + if (len & 3) { if (len < 4) { val = swab32(val); @@ -245,13 +242,14 @@ static void mt7621_spi_write_half_duplex(struct mt7621_spi *rs, } mt7621_spi_write(rs, MT7621_SPI_OPCODE + (len & ~3), val); } + rs->pending_write = len; } -static int mt7621_spi_transfer_one_message(struct spi_master *master, +static int mt7621_spi_transfer_one_message(struct spi_controller *master, struct spi_message *m) { - struct mt7621_spi *rs = spi_master_get_devdata(master); + struct mt7621_spi *rs = spi_controller_get_devdata(master); struct spi_device *spi = m->spi; unsigned int speed = spi->max_speed_hz; struct spi_transfer *t = NULL; @@ -268,11 +266,14 @@ static int mt7621_spi_transfer_one_message(struct spi_master *master, goto msg_done; } + /* Assert CS */ mt7621_spi_set_cs(spi, 1); + m->actual_length = 0; list_for_each_entry(t, &m->transfers, transfer_list) { if ((t->rx_buf) && (t->tx_buf)) { - /* This controller will shift some extra data out + /* + * This controller will shift some extra data out * of spi_opcode if (mosi_bit_cnt > 0) && * (cmd_bit_cnt == 0). So the claimed full-duplex * support is broken since we have no way to read @@ -287,8 +288,9 @@ static int mt7621_spi_transfer_one_message(struct spi_master *master, } m->actual_length += t->len; } - mt7621_spi_flush(rs); + /* Flush data and deassert CS */ + mt7621_spi_flush(rs); mt7621_spi_set_cs(spi, 0); msg_done: @@ -303,7 +305,7 @@ static int mt7621_spi_setup(struct spi_device *spi) struct mt7621_spi *rs = spidev_to_mt7621_spi(spi); if ((spi->max_speed_hz == 0) || - (spi->max_speed_hz > (rs->sys_freq / 2))) + (spi->max_speed_hz > (rs->sys_freq / 2))) spi->max_speed_hz = (rs->sys_freq / 2); if (spi->max_speed_hz < (rs->sys_freq / 4097)) { @@ -324,7 +326,7 @@ MODULE_DEVICE_TABLE(of, mt7621_spi_match); static int mt7621_spi_probe(struct platform_device *pdev) { const struct of_device_id *match; - struct spi_master *master; + struct spi_controller *master; struct mt7621_spi *rs; void __iomem *base; struct resource *r; @@ -361,7 +363,7 @@ static int mt7621_spi_probe(struct platform_device *pdev) } master->mode_bits = SPI_LSB_FIRST; - + master->flags = SPI_CONTROLLER_HALF_DUPLEX; master->setup = mt7621_spi_setup; master->transfer_one_message = mt7621_spi_transfer_one_message; master->bits_per_word_mask = SPI_BPW_MASK(8); @@ -370,7 +372,7 @@ static int mt7621_spi_probe(struct platform_device *pdev) dev_set_drvdata(&pdev->dev, master); - rs = spi_master_get_devdata(master); + rs = spi_controller_get_devdata(master); rs->base = base; rs->clk = clk; rs->master = master; @@ -385,21 +387,18 @@ static int mt7621_spi_probe(struct platform_device *pdev) return ret; } - mt7621_spi_reset(rs); - - return spi_register_master(master); + return devm_spi_register_controller(&pdev->dev, master); } static int mt7621_spi_remove(struct platform_device *pdev) { - struct spi_master *master; + struct spi_controller *master; struct mt7621_spi *rs; master = dev_get_drvdata(&pdev->dev); - rs = spi_master_get_devdata(master); + rs = spi_controller_get_devdata(master); - clk_disable(rs->clk); - spi_unregister_master(master); + clk_disable_unprepare(rs->clk); return 0; } diff --git a/drivers/spi/spi-mxic.c b/drivers/spi/spi-mxic.c index e41ae6ef0f8a..f48563c09b97 100644 --- a/drivers/spi/spi-mxic.c +++ b/drivers/spi/spi-mxic.c @@ -492,8 +492,7 @@ static int mxic_spi_transfer_one(struct spi_master *master, static int __maybe_unused mxic_spi_runtime_suspend(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct spi_master *master = platform_get_drvdata(pdev); + struct spi_master *master = dev_get_drvdata(dev); struct mxic_spi *mxic = spi_master_get_devdata(master); mxic_spi_clk_disable(mxic); @@ -504,8 +503,7 @@ static int __maybe_unused mxic_spi_runtime_suspend(struct device *dev) static int __maybe_unused mxic_spi_runtime_resume(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct spi_master *master = platform_get_drvdata(pdev); + struct spi_master *master = dev_get_drvdata(dev); struct mxic_spi *mxic = spi_master_get_devdata(master); int ret; diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c index 7f280567093e..25ea4a9e0dbc 100644 --- a/drivers/spi/spi-orion.c +++ b/drivers/spi/spi-orion.c @@ -470,6 +470,8 @@ orion_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer) if (orion_spi_write_read_8bit(spi, &tx, &rx) < 0) goto out; count--; + if (xfer->word_delay_usecs) + udelay(xfer->word_delay_usecs); } while (count); } else if (word_len == 16) { const u16 *tx = xfer->tx_buf; @@ -479,6 +481,8 @@ orion_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer) if (orion_spi_write_read_16bit(spi, &tx, &rx) < 0) goto out; count -= 2; + if (xfer->word_delay_usecs) + udelay(xfer->word_delay_usecs); } while (count); } diff --git a/drivers/spi/spi-pic32.c b/drivers/spi/spi-pic32.c index 131849adc570..d9f374c8b709 100644 --- a/drivers/spi/spi-pic32.c +++ b/drivers/spi/spi-pic32.c @@ -559,7 +559,7 @@ static int pic32_spi_one_transfer(struct spi_master *master, dev_err(&spi->dev, "wait error/timedout\n"); if (dma_issued) { dmaengine_terminate_all(master->dma_rx); - dmaengine_terminate_all(master->dma_rx); + dmaengine_terminate_all(master->dma_tx); } ret = -ETIMEDOUT; } else { diff --git a/drivers/spi/spi-pxa2xx-dma.c b/drivers/spi/spi-pxa2xx-dma.c index 15592598273e..e5c26c1779ab 100644 --- a/drivers/spi/spi-pxa2xx-dma.c +++ b/drivers/spi/spi-pxa2xx-dma.c @@ -239,13 +239,15 @@ int pxa2xx_spi_set_dma_burst_and_threshold(struct chip_data *chip, u32 *threshold) { struct pxa2xx_spi_chip *chip_info = spi->controller_data; + struct driver_data *drv_data = spi_controller_get_devdata(spi->controller); + u32 dma_burst_size = drv_data->controller_info->dma_burst_size; /* * If the DMA burst size is given in chip_info we use that, * otherwise we use the default. Also we use the default FIFO * thresholds for now. */ - *burst_code = chip_info ? chip_info->dma_burst_size : 1; + *burst_code = chip_info ? chip_info->dma_burst_size : dma_burst_size; *threshold = SSCR1_RxTresh(RX_THRESH_DFLT) | SSCR1_TxTresh(TX_THRESH_DFLT); diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c index 1727fdfbac28..d456c5251b5d 100644 --- a/drivers/spi/spi-pxa2xx-pci.c +++ b/drivers/spi/spi-pxa2xx-pci.c @@ -5,7 +5,6 @@ */ #include <linux/clk-provider.h> #include <linux/module.h> -#include <linux/of_device.h> #include <linux/pci.h> #include <linux/platform_device.h> #include <linux/spi/pxa2xx_spi.h> @@ -35,6 +34,8 @@ struct pxa_spi_info { void *tx_param; void *rx_param; + int dma_burst_size; + int (*setup)(struct pci_dev *pdev, struct pxa_spi_info *c); }; @@ -133,6 +134,7 @@ static int mrfld_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c) rx->dma_dev = &dma_dev->dev; c->dma_filter = lpss_dma_filter; + c->dma_burst_size = 8; return 0; } @@ -223,6 +225,7 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev, spi_pdata.tx_param = c->tx_param; spi_pdata.rx_param = c->rx_param; spi_pdata.enable_dma = c->rx_param && c->tx_param; + spi_pdata.dma_burst_size = c->dma_burst_size ? c->dma_burst_size : 1; ssp = &spi_pdata.ssp; ssp->phys_base = pci_resource_start(dev, 0); diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index b6ddba833d02..e59c8b27b155 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -884,10 +884,14 @@ static unsigned int ssp_get_clk_div(struct driver_data *drv_data, int rate) rate = min_t(int, ssp_clk, rate); + /* + * Calculate the divisor for the SCR (Serial Clock Rate), avoiding + * that the SSP transmission rate can be greater than the device rate + */ if (ssp->type == PXA25x_SSP || ssp->type == CE4100_SSP) - return (ssp_clk / (2 * rate) - 1) & 0xff; + return (DIV_ROUND_UP(ssp_clk, 2 * rate) - 1) & 0xff; else - return (ssp_clk / rate - 1) & 0xfff; + return (DIV_ROUND_UP(ssp_clk, rate) - 1) & 0xfff; } static unsigned int pxa2xx_ssp_get_clk_div(struct driver_data *drv_data, @@ -925,7 +929,7 @@ static int pxa2xx_spi_transfer_one(struct spi_controller *controller, { struct driver_data *drv_data = spi_controller_get_devdata(controller); struct spi_message *message = controller->cur_msg; - struct chip_data *chip = spi_get_ctldata(message->spi); + struct chip_data *chip = spi_get_ctldata(spi); u32 dma_thresh = chip->dma_threshold; u32 dma_burst = chip->dma_burst_size; u32 change_mask = pxa2xx_spi_get_ssrc1_change_mask(drv_data); @@ -943,21 +947,21 @@ static int pxa2xx_spi_transfer_one(struct spi_controller *controller, /* reject already-mapped transfers; PIO won't always work */ if (message->is_dma_mapped || transfer->rx_dma || transfer->tx_dma) { - dev_err(&drv_data->pdev->dev, + dev_err(&spi->dev, "Mapped transfer length of %u is greater than %d\n", transfer->len, MAX_DMA_LEN); return -EINVAL; } /* warn ... we force this to PIO mode */ - dev_warn_ratelimited(&message->spi->dev, + dev_warn_ratelimited(&spi->dev, "DMA disabled for transfer length %ld greater than %d\n", (long)transfer->len, MAX_DMA_LEN); } /* Setup the transfer state based on the type of transfer */ if (pxa2xx_spi_flush(drv_data) == 0) { - dev_err(&drv_data->pdev->dev, "Flush failed\n"); + dev_err(&spi->dev, "Flush failed\n"); return -EIO; } drv_data->n_bytes = chip->n_bytes; @@ -999,15 +1003,15 @@ static int pxa2xx_spi_transfer_one(struct spi_controller *controller, */ if (chip->enable_dma) { if (pxa2xx_spi_set_dma_burst_and_threshold(chip, - message->spi, + spi, bits, &dma_burst, &dma_thresh)) - dev_warn_ratelimited(&message->spi->dev, + dev_warn_ratelimited(&spi->dev, "DMA burst size reduced to match bits_per_word\n"); } dma_mapped = controller->can_dma && - controller->can_dma(controller, message->spi, transfer) && + controller->can_dma(controller, spi, transfer) && controller->cur_msg_mapped; if (dma_mapped) { @@ -1035,12 +1039,12 @@ static int pxa2xx_spi_transfer_one(struct spi_controller *controller, /* NOTE: PXA25x_SSP _could_ use external clocking ... */ cr0 = pxa2xx_configure_sscr0(drv_data, clk_div, bits); if (!pxa25x_ssp_comp(drv_data)) - dev_dbg(&message->spi->dev, "%u Hz actual, %s\n", + dev_dbg(&spi->dev, "%u Hz actual, %s\n", controller->max_speed_hz / (1 + ((cr0 & SSCR0_SCR(0xfff)) >> 8)), dma_mapped ? "DMA" : "PIO"); else - dev_dbg(&message->spi->dev, "%u Hz actual, %s\n", + dev_dbg(&spi->dev, "%u Hz actual, %s\n", controller->max_speed_hz / 2 / (1 + ((cr0 & SSCR0_SCR(0x0ff)) >> 8)), dma_mapped ? "DMA" : "PIO"); @@ -1333,6 +1337,9 @@ static int setup(struct spi_device *spi) dev_warn(&spi->dev, "in setup: DMA burst size reduced to match bits_per_word\n"); } + dev_dbg(&spi->dev, + "in setup: DMA burst size set to %u\n", + chip->dma_burst_size); } switch (drv_data->ssp_type) { @@ -1451,6 +1458,10 @@ static const struct pci_device_id pxa2xx_spi_pci_compound_match[] = { { PCI_VDEVICE(INTEL, 0xa32a), LPSS_CNL_SSP }, { PCI_VDEVICE(INTEL, 0xa32b), LPSS_CNL_SSP }, { PCI_VDEVICE(INTEL, 0xa37b), LPSS_CNL_SSP }, + /* CML-LP */ + { PCI_VDEVICE(INTEL, 0x02aa), LPSS_CNL_SSP }, + { PCI_VDEVICE(INTEL, 0x02ab), LPSS_CNL_SSP }, + { PCI_VDEVICE(INTEL, 0x02fb), LPSS_CNL_SSP }, { }, }; @@ -1564,6 +1575,7 @@ pxa2xx_spi_init_pdata(struct platform_device *pdev) pdata->is_slave = of_property_read_bool(pdev->dev.of_node, "spi-slave"); pdata->num_chipselect = 1; pdata->enable_dma = true; + pdata->dma_burst_size = 1; return pdata; } @@ -1692,7 +1704,7 @@ static int pxa2xx_spi_probe(struct platform_device *pdev) if (platform_info->enable_dma) { status = pxa2xx_spi_dma_setup(drv_data); if (status) { - dev_dbg(dev, "no DMA channels available, using PIO\n"); + dev_warn(dev, "no DMA channels available, using PIO\n"); platform_info->enable_dma = false; } else { controller->can_dma = pxa2xx_spi_can_dma; @@ -1953,3 +1965,5 @@ static void __exit pxa2xx_spi_exit(void) platform_driver_unregister(&driver); } module_exit(pxa2xx_spi_exit); + +MODULE_SOFTDEP("pre: dw_dmac"); diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c index 556870dcdf79..15f5723d9f95 100644 --- a/drivers/spi/spi-rspi.c +++ b/drivers/spi/spi-rspi.c @@ -271,7 +271,8 @@ static int rspi_set_config_register(struct rspi_data *rspi, int access_size) /* Sets parity, interrupt mask */ rspi_write8(rspi, 0x00, RSPI_SPCR2); - /* Sets SPCMD */ + /* Resets sequencer */ + rspi_write8(rspi, 0, RSPI_SPSCR); rspi->spcmd |= SPCMD_SPB_8_TO_16(access_size); rspi_write16(rspi, rspi->spcmd, RSPI_SPCMD0); @@ -315,7 +316,8 @@ static int rspi_rz_set_config_register(struct rspi_data *rspi, int access_size) rspi_write8(rspi, 0x00, RSPI_SSLND); rspi_write8(rspi, 0x00, RSPI_SPND); - /* Sets SPCMD */ + /* Resets sequencer */ + rspi_write8(rspi, 0, RSPI_SPSCR); rspi->spcmd |= SPCMD_SPB_8_TO_16(access_size); rspi_write16(rspi, rspi->spcmd, RSPI_SPCMD0); @@ -366,7 +368,8 @@ static int qspi_set_config_register(struct rspi_data *rspi, int access_size) /* Sets buffer to allow normal operation */ rspi_write8(rspi, 0x00, QSPI_SPBFCR); - /* Sets SPCMD */ + /* Resets sequencer */ + rspi_write8(rspi, 0, RSPI_SPSCR); rspi_write16(rspi, rspi->spcmd, RSPI_SPCMD0); /* Sets RSPI mode */ @@ -736,27 +739,22 @@ static int qspi_trigger_transfer_out_in(struct rspi_data *rspi, const u8 *tx, while (len > 0) { n = qspi_set_send_trigger(rspi, len); qspi_set_receive_trigger(rspi, len); - if (n == QSPI_BUFFER_SIZE) { - ret = rspi_wait_for_tx_empty(rspi); - if (ret < 0) { - dev_err(&rspi->ctlr->dev, "transmit timeout\n"); - return ret; - } - for (i = 0; i < n; i++) - rspi_write_data(rspi, *tx++); + ret = rspi_wait_for_tx_empty(rspi); + if (ret < 0) { + dev_err(&rspi->ctlr->dev, "transmit timeout\n"); + return ret; + } + for (i = 0; i < n; i++) + rspi_write_data(rspi, *tx++); - ret = rspi_wait_for_rx_full(rspi); - if (ret < 0) { - dev_err(&rspi->ctlr->dev, "receive timeout\n"); - return ret; - } - for (i = 0; i < n; i++) - *rx++ = rspi_read_data(rspi); - } else { - ret = rspi_pio_transfer(rspi, tx, rx, n); - if (ret < 0) - return ret; + ret = rspi_wait_for_rx_full(rspi); + if (ret < 0) { + dev_err(&rspi->ctlr->dev, "receive timeout\n"); + return ret; } + for (i = 0; i < n; i++) + *rx++ = rspi_read_data(rspi); + len -= n; } @@ -793,19 +791,14 @@ static int qspi_transfer_out(struct rspi_data *rspi, struct spi_transfer *xfer) while (n > 0) { len = qspi_set_send_trigger(rspi, n); - if (len == QSPI_BUFFER_SIZE) { - ret = rspi_wait_for_tx_empty(rspi); - if (ret < 0) { - dev_err(&rspi->ctlr->dev, "transmit timeout\n"); - return ret; - } - for (i = 0; i < len; i++) - rspi_write_data(rspi, *tx++); - } else { - ret = rspi_pio_transfer(rspi, tx, NULL, len); - if (ret < 0) - return ret; + ret = rspi_wait_for_tx_empty(rspi); + if (ret < 0) { + dev_err(&rspi->ctlr->dev, "transmit timeout\n"); + return ret; } + for (i = 0; i < len; i++) + rspi_write_data(rspi, *tx++); + n -= len; } @@ -830,19 +823,14 @@ static int qspi_transfer_in(struct rspi_data *rspi, struct spi_transfer *xfer) while (n > 0) { len = qspi_set_receive_trigger(rspi, n); - if (len == QSPI_BUFFER_SIZE) { - ret = rspi_wait_for_rx_full(rspi); - if (ret < 0) { - dev_err(&rspi->ctlr->dev, "receive timeout\n"); - return ret; - } - for (i = 0; i < len; i++) - *rx++ = rspi_read_data(rspi); - } else { - ret = rspi_pio_transfer(rspi, NULL, rx, len); - if (ret < 0) - return ret; + ret = rspi_wait_for_rx_full(rspi); + if (ret < 0) { + dev_err(&rspi->ctlr->dev, "receive timeout\n"); + return ret; } + for (i = 0; i < len; i++) + *rx++ = rspi_read_data(rspi); + n -= len; } @@ -868,28 +856,6 @@ static int qspi_transfer_one(struct spi_controller *ctlr, } } -static int rspi_setup(struct spi_device *spi) -{ - struct rspi_data *rspi = spi_controller_get_devdata(spi->controller); - - rspi->max_speed_hz = spi->max_speed_hz; - - rspi->spcmd = SPCMD_SSLKP; - if (spi->mode & SPI_CPOL) - rspi->spcmd |= SPCMD_CPOL; - if (spi->mode & SPI_CPHA) - rspi->spcmd |= SPCMD_CPHA; - - /* CMOS output mode and MOSI signal from previous transfer */ - rspi->sppcr = 0; - if (spi->mode & SPI_LOOP) - rspi->sppcr |= SPPCR_SPLP; - - set_config_register(rspi, 8); - - return 0; -} - static u16 qspi_transfer_mode(const struct spi_transfer *xfer) { if (xfer->tx_buf) @@ -959,8 +925,24 @@ static int rspi_prepare_message(struct spi_controller *ctlr, struct spi_message *msg) { struct rspi_data *rspi = spi_controller_get_devdata(ctlr); + struct spi_device *spi = msg->spi; int ret; + rspi->max_speed_hz = spi->max_speed_hz; + + rspi->spcmd = SPCMD_SSLKP; + if (spi->mode & SPI_CPOL) + rspi->spcmd |= SPCMD_CPOL; + if (spi->mode & SPI_CPHA) + rspi->spcmd |= SPCMD_CPHA; + + /* CMOS output mode and MOSI signal from previous transfer */ + rspi->sppcr = 0; + if (spi->mode & SPI_LOOP) + rspi->sppcr |= SPPCR_SPLP; + + set_config_register(rspi, 8); + if (msg->spi->mode & (SPI_TX_DUAL | SPI_TX_QUAD | SPI_RX_DUAL | SPI_RX_QUAD)) { /* Setup sequencer for messages with multiple transfer modes */ @@ -1267,7 +1249,6 @@ static int rspi_probe(struct platform_device *pdev) init_waitqueue_head(&rspi->wait); ctlr->bus_num = pdev->id; - ctlr->setup = rspi_setup; ctlr->auto_runtime_pm = true; ctlr->transfer_one = ops->transfer_one; ctlr->prepare_message = rspi_prepare_message; diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c index e2eb466db10a..6aab7b2136db 100644 --- a/drivers/spi/spi-sh-msiof.c +++ b/drivers/spi/spi-sh-msiof.c @@ -18,6 +18,7 @@ #include <linux/gpio/consumer.h> #include <linux/interrupt.h> #include <linux/io.h> +#include <linux/iopoll.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/of.h> @@ -82,111 +83,113 @@ struct sh_msiof_spi_priv { #define RFDR 0x60 /* Receive FIFO Data Register */ /* TMDR1 and RMDR1 */ -#define MDR1_TRMD 0x80000000 /* Transfer Mode (1 = Master mode) */ -#define MDR1_SYNCMD_MASK 0x30000000 /* SYNC Mode */ -#define MDR1_SYNCMD_SPI 0x20000000 /* Level mode/SPI */ -#define MDR1_SYNCMD_LR 0x30000000 /* L/R mode */ -#define MDR1_SYNCAC_SHIFT 25 /* Sync Polarity (1 = Active-low) */ -#define MDR1_BITLSB_SHIFT 24 /* MSB/LSB First (1 = LSB first) */ -#define MDR1_DTDL_SHIFT 20 /* Data Pin Bit Delay for MSIOF_SYNC */ -#define MDR1_SYNCDL_SHIFT 16 /* Frame Sync Signal Timing Delay */ -#define MDR1_FLD_MASK 0x0000000c /* Frame Sync Signal Interval (0-3) */ -#define MDR1_FLD_SHIFT 2 -#define MDR1_XXSTP 0x00000001 /* Transmission/Reception Stop on FIFO */ +#define MDR1_TRMD BIT(31) /* Transfer Mode (1 = Master mode) */ +#define MDR1_SYNCMD_MASK GENMASK(29, 28) /* SYNC Mode */ +#define MDR1_SYNCMD_SPI (2 << 28)/* Level mode/SPI */ +#define MDR1_SYNCMD_LR (3 << 28)/* L/R mode */ +#define MDR1_SYNCAC_SHIFT 25 /* Sync Polarity (1 = Active-low) */ +#define MDR1_BITLSB_SHIFT 24 /* MSB/LSB First (1 = LSB first) */ +#define MDR1_DTDL_SHIFT 20 /* Data Pin Bit Delay for MSIOF_SYNC */ +#define MDR1_SYNCDL_SHIFT 16 /* Frame Sync Signal Timing Delay */ +#define MDR1_FLD_MASK GENMASK(3, 2) /* Frame Sync Signal Interval (0-3) */ +#define MDR1_FLD_SHIFT 2 +#define MDR1_XXSTP BIT(0) /* Transmission/Reception Stop on FIFO */ /* TMDR1 */ -#define TMDR1_PCON 0x40000000 /* Transfer Signal Connection */ -#define TMDR1_SYNCCH_MASK 0xc000000 /* Synchronization Signal Channel Select */ -#define TMDR1_SYNCCH_SHIFT 26 /* 0=MSIOF_SYNC, 1=MSIOF_SS1, 2=MSIOF_SS2 */ +#define TMDR1_PCON BIT(30) /* Transfer Signal Connection */ +#define TMDR1_SYNCCH_MASK GENMASK(27, 26) /* Sync Signal Channel Select */ +#define TMDR1_SYNCCH_SHIFT 26 /* 0=MSIOF_SYNC, 1=MSIOF_SS1, 2=MSIOF_SS2 */ /* TMDR2 and RMDR2 */ #define MDR2_BITLEN1(i) (((i) - 1) << 24) /* Data Size (8-32 bits) */ #define MDR2_WDLEN1(i) (((i) - 1) << 16) /* Word Count (1-64/256 (SH, A1))) */ -#define MDR2_GRPMASK1 0x00000001 /* Group Output Mask 1 (SH, A1) */ +#define MDR2_GRPMASK1 BIT(0) /* Group Output Mask 1 (SH, A1) */ /* TSCR and RSCR */ -#define SCR_BRPS_MASK 0x1f00 /* Prescaler Setting (1-32) */ +#define SCR_BRPS_MASK GENMASK(12, 8) /* Prescaler Setting (1-32) */ #define SCR_BRPS(i) (((i) - 1) << 8) -#define SCR_BRDV_MASK 0x0007 /* Baud Rate Generator's Division Ratio */ -#define SCR_BRDV_DIV_2 0x0000 -#define SCR_BRDV_DIV_4 0x0001 -#define SCR_BRDV_DIV_8 0x0002 -#define SCR_BRDV_DIV_16 0x0003 -#define SCR_BRDV_DIV_32 0x0004 -#define SCR_BRDV_DIV_1 0x0007 +#define SCR_BRDV_MASK GENMASK(2, 0) /* Baud Rate Generator's Division Ratio */ +#define SCR_BRDV_DIV_2 0 +#define SCR_BRDV_DIV_4 1 +#define SCR_BRDV_DIV_8 2 +#define SCR_BRDV_DIV_16 3 +#define SCR_BRDV_DIV_32 4 +#define SCR_BRDV_DIV_1 7 /* CTR */ -#define CTR_TSCKIZ_MASK 0xc0000000 /* Transmit Clock I/O Polarity Select */ -#define CTR_TSCKIZ_SCK 0x80000000 /* Disable SCK when TX disabled */ -#define CTR_TSCKIZ_POL_SHIFT 30 /* Transmit Clock Polarity */ -#define CTR_RSCKIZ_MASK 0x30000000 /* Receive Clock Polarity Select */ -#define CTR_RSCKIZ_SCK 0x20000000 /* Must match CTR_TSCKIZ_SCK */ -#define CTR_RSCKIZ_POL_SHIFT 28 /* Receive Clock Polarity */ -#define CTR_TEDG_SHIFT 27 /* Transmit Timing (1 = falling edge) */ -#define CTR_REDG_SHIFT 26 /* Receive Timing (1 = falling edge) */ -#define CTR_TXDIZ_MASK 0x00c00000 /* Pin Output When TX is Disabled */ -#define CTR_TXDIZ_LOW 0x00000000 /* 0 */ -#define CTR_TXDIZ_HIGH 0x00400000 /* 1 */ -#define CTR_TXDIZ_HIZ 0x00800000 /* High-impedance */ -#define CTR_TSCKE 0x00008000 /* Transmit Serial Clock Output Enable */ -#define CTR_TFSE 0x00004000 /* Transmit Frame Sync Signal Output Enable */ -#define CTR_TXE 0x00000200 /* Transmit Enable */ -#define CTR_RXE 0x00000100 /* Receive Enable */ +#define CTR_TSCKIZ_MASK GENMASK(31, 30) /* Transmit Clock I/O Polarity Select */ +#define CTR_TSCKIZ_SCK BIT(31) /* Disable SCK when TX disabled */ +#define CTR_TSCKIZ_POL_SHIFT 30 /* Transmit Clock Polarity */ +#define CTR_RSCKIZ_MASK GENMASK(29, 28) /* Receive Clock Polarity Select */ +#define CTR_RSCKIZ_SCK BIT(29) /* Must match CTR_TSCKIZ_SCK */ +#define CTR_RSCKIZ_POL_SHIFT 28 /* Receive Clock Polarity */ +#define CTR_TEDG_SHIFT 27 /* Transmit Timing (1 = falling edge) */ +#define CTR_REDG_SHIFT 26 /* Receive Timing (1 = falling edge) */ +#define CTR_TXDIZ_MASK GENMASK(23, 22) /* Pin Output When TX is Disabled */ +#define CTR_TXDIZ_LOW (0 << 22) /* 0 */ +#define CTR_TXDIZ_HIGH (1 << 22) /* 1 */ +#define CTR_TXDIZ_HIZ (2 << 22) /* High-impedance */ +#define CTR_TSCKE BIT(15) /* Transmit Serial Clock Output Enable */ +#define CTR_TFSE BIT(14) /* Transmit Frame Sync Signal Output Enable */ +#define CTR_TXE BIT(9) /* Transmit Enable */ +#define CTR_RXE BIT(8) /* Receive Enable */ +#define CTR_TXRST BIT(1) /* Transmit Reset */ +#define CTR_RXRST BIT(0) /* Receive Reset */ /* FCTR */ -#define FCTR_TFWM_MASK 0xe0000000 /* Transmit FIFO Watermark */ -#define FCTR_TFWM_64 0x00000000 /* Transfer Request when 64 empty stages */ -#define FCTR_TFWM_32 0x20000000 /* Transfer Request when 32 empty stages */ -#define FCTR_TFWM_24 0x40000000 /* Transfer Request when 24 empty stages */ -#define FCTR_TFWM_16 0x60000000 /* Transfer Request when 16 empty stages */ -#define FCTR_TFWM_12 0x80000000 /* Transfer Request when 12 empty stages */ -#define FCTR_TFWM_8 0xa0000000 /* Transfer Request when 8 empty stages */ -#define FCTR_TFWM_4 0xc0000000 /* Transfer Request when 4 empty stages */ -#define FCTR_TFWM_1 0xe0000000 /* Transfer Request when 1 empty stage */ -#define FCTR_TFUA_MASK 0x07f00000 /* Transmit FIFO Usable Area */ -#define FCTR_TFUA_SHIFT 20 +#define FCTR_TFWM_MASK GENMASK(31, 29) /* Transmit FIFO Watermark */ +#define FCTR_TFWM_64 (0 << 29) /* Transfer Request when 64 empty stages */ +#define FCTR_TFWM_32 (1 << 29) /* Transfer Request when 32 empty stages */ +#define FCTR_TFWM_24 (2 << 29) /* Transfer Request when 24 empty stages */ +#define FCTR_TFWM_16 (3 << 29) /* Transfer Request when 16 empty stages */ +#define FCTR_TFWM_12 (4 << 29) /* Transfer Request when 12 empty stages */ +#define FCTR_TFWM_8 (5 << 29) /* Transfer Request when 8 empty stages */ +#define FCTR_TFWM_4 (6 << 29) /* Transfer Request when 4 empty stages */ +#define FCTR_TFWM_1 (7 << 29) /* Transfer Request when 1 empty stage */ +#define FCTR_TFUA_MASK GENMASK(26, 20) /* Transmit FIFO Usable Area */ +#define FCTR_TFUA_SHIFT 20 #define FCTR_TFUA(i) ((i) << FCTR_TFUA_SHIFT) -#define FCTR_RFWM_MASK 0x0000e000 /* Receive FIFO Watermark */ -#define FCTR_RFWM_1 0x00000000 /* Transfer Request when 1 valid stages */ -#define FCTR_RFWM_4 0x00002000 /* Transfer Request when 4 valid stages */ -#define FCTR_RFWM_8 0x00004000 /* Transfer Request when 8 valid stages */ -#define FCTR_RFWM_16 0x00006000 /* Transfer Request when 16 valid stages */ -#define FCTR_RFWM_32 0x00008000 /* Transfer Request when 32 valid stages */ -#define FCTR_RFWM_64 0x0000a000 /* Transfer Request when 64 valid stages */ -#define FCTR_RFWM_128 0x0000c000 /* Transfer Request when 128 valid stages */ -#define FCTR_RFWM_256 0x0000e000 /* Transfer Request when 256 valid stages */ -#define FCTR_RFUA_MASK 0x00001ff0 /* Receive FIFO Usable Area (0x40 = full) */ -#define FCTR_RFUA_SHIFT 4 +#define FCTR_RFWM_MASK GENMASK(15, 13) /* Receive FIFO Watermark */ +#define FCTR_RFWM_1 (0 << 13) /* Transfer Request when 1 valid stages */ +#define FCTR_RFWM_4 (1 << 13) /* Transfer Request when 4 valid stages */ +#define FCTR_RFWM_8 (2 << 13) /* Transfer Request when 8 valid stages */ +#define FCTR_RFWM_16 (3 << 13) /* Transfer Request when 16 valid stages */ +#define FCTR_RFWM_32 (4 << 13) /* Transfer Request when 32 valid stages */ +#define FCTR_RFWM_64 (5 << 13) /* Transfer Request when 64 valid stages */ +#define FCTR_RFWM_128 (6 << 13) /* Transfer Request when 128 valid stages */ +#define FCTR_RFWM_256 (7 << 13) /* Transfer Request when 256 valid stages */ +#define FCTR_RFUA_MASK GENMASK(12, 4) /* Receive FIFO Usable Area (0x40 = full) */ +#define FCTR_RFUA_SHIFT 4 #define FCTR_RFUA(i) ((i) << FCTR_RFUA_SHIFT) /* STR */ -#define STR_TFEMP 0x20000000 /* Transmit FIFO Empty */ -#define STR_TDREQ 0x10000000 /* Transmit Data Transfer Request */ -#define STR_TEOF 0x00800000 /* Frame Transmission End */ -#define STR_TFSERR 0x00200000 /* Transmit Frame Synchronization Error */ -#define STR_TFOVF 0x00100000 /* Transmit FIFO Overflow */ -#define STR_TFUDF 0x00080000 /* Transmit FIFO Underflow */ -#define STR_RFFUL 0x00002000 /* Receive FIFO Full */ -#define STR_RDREQ 0x00001000 /* Receive Data Transfer Request */ -#define STR_REOF 0x00000080 /* Frame Reception End */ -#define STR_RFSERR 0x00000020 /* Receive Frame Synchronization Error */ -#define STR_RFUDF 0x00000010 /* Receive FIFO Underflow */ -#define STR_RFOVF 0x00000008 /* Receive FIFO Overflow */ +#define STR_TFEMP BIT(29) /* Transmit FIFO Empty */ +#define STR_TDREQ BIT(28) /* Transmit Data Transfer Request */ +#define STR_TEOF BIT(23) /* Frame Transmission End */ +#define STR_TFSERR BIT(21) /* Transmit Frame Synchronization Error */ +#define STR_TFOVF BIT(20) /* Transmit FIFO Overflow */ +#define STR_TFUDF BIT(19) /* Transmit FIFO Underflow */ +#define STR_RFFUL BIT(13) /* Receive FIFO Full */ +#define STR_RDREQ BIT(12) /* Receive Data Transfer Request */ +#define STR_REOF BIT(7) /* Frame Reception End */ +#define STR_RFSERR BIT(5) /* Receive Frame Synchronization Error */ +#define STR_RFUDF BIT(4) /* Receive FIFO Underflow */ +#define STR_RFOVF BIT(3) /* Receive FIFO Overflow */ /* IER */ -#define IER_TDMAE 0x80000000 /* Transmit Data DMA Transfer Req. Enable */ -#define IER_TFEMPE 0x20000000 /* Transmit FIFO Empty Enable */ -#define IER_TDREQE 0x10000000 /* Transmit Data Transfer Request Enable */ -#define IER_TEOFE 0x00800000 /* Frame Transmission End Enable */ -#define IER_TFSERRE 0x00200000 /* Transmit Frame Sync Error Enable */ -#define IER_TFOVFE 0x00100000 /* Transmit FIFO Overflow Enable */ -#define IER_TFUDFE 0x00080000 /* Transmit FIFO Underflow Enable */ -#define IER_RDMAE 0x00008000 /* Receive Data DMA Transfer Req. Enable */ -#define IER_RFFULE 0x00002000 /* Receive FIFO Full Enable */ -#define IER_RDREQE 0x00001000 /* Receive Data Transfer Request Enable */ -#define IER_REOFE 0x00000080 /* Frame Reception End Enable */ -#define IER_RFSERRE 0x00000020 /* Receive Frame Sync Error Enable */ -#define IER_RFUDFE 0x00000010 /* Receive FIFO Underflow Enable */ -#define IER_RFOVFE 0x00000008 /* Receive FIFO Overflow Enable */ +#define IER_TDMAE BIT(31) /* Transmit Data DMA Transfer Req. Enable */ +#define IER_TFEMPE BIT(29) /* Transmit FIFO Empty Enable */ +#define IER_TDREQE BIT(28) /* Transmit Data Transfer Request Enable */ +#define IER_TEOFE BIT(23) /* Frame Transmission End Enable */ +#define IER_TFSERRE BIT(21) /* Transmit Frame Sync Error Enable */ +#define IER_TFOVFE BIT(20) /* Transmit FIFO Overflow Enable */ +#define IER_TFUDFE BIT(19) /* Transmit FIFO Underflow Enable */ +#define IER_RDMAE BIT(15) /* Receive Data DMA Transfer Req. Enable */ +#define IER_RFFULE BIT(13) /* Receive FIFO Full Enable */ +#define IER_RDREQE BIT(12) /* Receive Data Transfer Request Enable */ +#define IER_REOFE BIT(7) /* Frame Reception End Enable */ +#define IER_RFSERRE BIT(5) /* Receive Frame Sync Error Enable */ +#define IER_RFUDFE BIT(4) /* Receive FIFO Underflow Enable */ +#define IER_RFOVFE BIT(3) /* Receive FIFO Overflow Enable */ static u32 sh_msiof_read(struct sh_msiof_spi_priv *p, int reg_offs) @@ -219,21 +222,14 @@ static int sh_msiof_modify_ctr_wait(struct sh_msiof_spi_priv *p, { u32 mask = clr | set; u32 data; - int k; data = sh_msiof_read(p, CTR); data &= ~clr; data |= set; sh_msiof_write(p, CTR, data); - for (k = 100; k > 0; k--) { - if ((sh_msiof_read(p, CTR) & mask) == set) - break; - - udelay(10); - } - - return k > 0 ? 0 : -ETIMEDOUT; + return readl_poll_timeout_atomic(p->mapbase + CTR, data, + (data & mask) == set, 10, 1000); } static irqreturn_t sh_msiof_spi_irq(int irq, void *data) @@ -247,6 +243,19 @@ static irqreturn_t sh_msiof_spi_irq(int irq, void *data) return IRQ_HANDLED; } +static void sh_msiof_spi_reset_regs(struct sh_msiof_spi_priv *p) +{ + u32 mask = CTR_TXRST | CTR_RXRST; + u32 data; + + data = sh_msiof_read(p, CTR); + data |= mask; + sh_msiof_write(p, CTR, data); + + readl_poll_timeout_atomic(p->mapbase + CTR, data, !(data & mask), 1, + 100); +} + static const u32 sh_msiof_spi_div_array[] = { SCR_BRDV_DIV_1, SCR_BRDV_DIV_2, SCR_BRDV_DIV_4, SCR_BRDV_DIV_8, SCR_BRDV_DIV_16, SCR_BRDV_DIV_32, @@ -540,25 +549,11 @@ static void sh_msiof_spi_read_fifo_s32u(struct sh_msiof_spi_priv *p, static int sh_msiof_spi_setup(struct spi_device *spi) { - struct device_node *np = spi->controller->dev.of_node; struct sh_msiof_spi_priv *p = spi_controller_get_devdata(spi->controller); u32 clr, set, tmp; - if (!np) { - /* - * Use spi->controller_data for CS (same strategy as spi_gpio), - * if any. otherwise let HW control CS - */ - spi->cs_gpio = (uintptr_t)spi->controller_data; - } - - if (gpio_is_valid(spi->cs_gpio)) { - gpio_direction_output(spi->cs_gpio, !(spi->mode & SPI_CS_HIGH)); - return 0; - } - - if (spi_controller_is_slave(p->ctlr)) + if (spi->cs_gpiod || spi_controller_is_slave(p->ctlr)) return 0; if (p->native_cs_inited && @@ -591,7 +586,7 @@ static int sh_msiof_prepare_message(struct spi_controller *ctlr, u32 ss, cs_high; /* Configure pins before asserting CS */ - if (gpio_is_valid(spi->cs_gpio)) { + if (spi->cs_gpiod) { ss = p->unused_ss; cs_high = p->native_cs_high; } else { @@ -926,6 +921,9 @@ static int sh_msiof_transfer_one(struct spi_controller *ctlr, bool swab; int ret; + /* reset registers */ + sh_msiof_spi_reset_regs(p); + /* setup clocks (clock already enabled in chipselect()) */ if (!spi_controller_is_slave(p->ctlr)) sh_msiof_spi_set_clk_regs(p, clk_get_rate(p->clk), t->speed_hz); @@ -1144,6 +1142,7 @@ static int sh_msiof_get_cs_gpios(struct sh_msiof_spi_priv *p) gpiod = devm_gpiod_get_index(dev, "cs", i, GPIOD_ASIS); if (!IS_ERR(gpiod)) { + devm_gpiod_put(dev, gpiod); cs_gpios++; continue; } @@ -1395,6 +1394,7 @@ static int sh_msiof_spi_probe(struct platform_device *pdev) ctlr->bits_per_word_mask = chipdata->bits_per_word_mask; ctlr->auto_runtime_pm = true; ctlr->transfer_one = sh_msiof_transfer_one; + ctlr->use_gpio_descriptors = true; ret = sh_msiof_request_dma(p); if (ret < 0) diff --git a/drivers/spi/spi-stm32-qspi.c b/drivers/spi/spi-stm32-qspi.c index 3b2a9a6b990d..42f8e3c6aa1f 100644 --- a/drivers/spi/spi-stm32-qspi.c +++ b/drivers/spi/spi-stm32-qspi.c @@ -5,6 +5,8 @@ */ #include <linux/bitfield.h> #include <linux/clk.h> +#include <linux/dmaengine.h> +#include <linux/dma-mapping.h> #include <linux/errno.h> #include <linux/io.h> #include <linux/iopoll.h> @@ -13,6 +15,7 @@ #include <linux/mutex.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/pinctrl/consumer.h> #include <linux/platform_device.h> #include <linux/reset.h> #include <linux/sizes.h> @@ -76,7 +79,6 @@ #define QSPI_PSMAR 0x28 #define QSPI_PIR 0x2c #define QSPI_LPTR 0x30 -#define LPTR_DFT_TIMEOUT 0x10 #define STM32_QSPI_MAX_MMAP_SZ SZ_256M #define STM32_QSPI_MAX_NORCHIP 2 @@ -84,6 +86,7 @@ #define STM32_FIFO_TIMEOUT_US 30000 #define STM32_BUSY_TIMEOUT_US 100000 #define STM32_ABT_TIMEOUT_US 100000 +#define STM32_COMP_TIMEOUT_MS 1000 struct stm32_qspi_flash { struct stm32_qspi *qspi; @@ -93,6 +96,8 @@ struct stm32_qspi_flash { struct stm32_qspi { struct device *dev; + struct spi_controller *ctrl; + phys_addr_t phys_base; void __iomem *io_base; void __iomem *mm_base; resource_size_t mm_size; @@ -102,6 +107,13 @@ struct stm32_qspi { struct completion data_completion; u32 fmode; + struct dma_chan *dma_chtx; + struct dma_chan *dma_chrx; + struct completion dma_completion; + + u32 cr_reg; + u32 dcr_reg; + /* * to protect device configuration, could be different between * 2 flash access (bk1, bk2) @@ -177,6 +189,81 @@ static int stm32_qspi_tx_mm(struct stm32_qspi *qspi, return 0; } +static void stm32_qspi_dma_callback(void *arg) +{ + struct completion *dma_completion = arg; + + complete(dma_completion); +} + +static int stm32_qspi_tx_dma(struct stm32_qspi *qspi, + const struct spi_mem_op *op) +{ + struct dma_async_tx_descriptor *desc; + enum dma_transfer_direction dma_dir; + struct dma_chan *dma_ch; + struct sg_table sgt; + dma_cookie_t cookie; + u32 cr, t_out; + int err; + + if (op->data.dir == SPI_MEM_DATA_IN) { + dma_dir = DMA_DEV_TO_MEM; + dma_ch = qspi->dma_chrx; + } else { + dma_dir = DMA_MEM_TO_DEV; + dma_ch = qspi->dma_chtx; + } + + /* + * spi_map_buf return -EINVAL if the buffer is not DMA-able + * (DMA-able: in vmalloc | kmap | virt_addr_valid) + */ + err = spi_controller_dma_map_mem_op_data(qspi->ctrl, op, &sgt); + if (err) + return err; + + desc = dmaengine_prep_slave_sg(dma_ch, sgt.sgl, sgt.nents, + dma_dir, DMA_PREP_INTERRUPT); + if (!desc) { + err = -ENOMEM; + goto out_unmap; + } + + cr = readl_relaxed(qspi->io_base + QSPI_CR); + + reinit_completion(&qspi->dma_completion); + desc->callback = stm32_qspi_dma_callback; + desc->callback_param = &qspi->dma_completion; + cookie = dmaengine_submit(desc); + err = dma_submit_error(cookie); + if (err) + goto out; + + dma_async_issue_pending(dma_ch); + + writel_relaxed(cr | CR_DMAEN, qspi->io_base + QSPI_CR); + + t_out = sgt.nents * STM32_COMP_TIMEOUT_MS; + if (!wait_for_completion_interruptible_timeout(&qspi->dma_completion, + msecs_to_jiffies(t_out))) + err = -ETIMEDOUT; + + if (dma_async_is_tx_complete(dma_ch, cookie, + NULL, NULL) != DMA_COMPLETE) + err = -ETIMEDOUT; + + if (err) + dmaengine_terminate_all(dma_ch); + +out: + writel_relaxed(cr & ~CR_DMAEN, qspi->io_base + QSPI_CR); +out_unmap: + spi_controller_dma_unmap_mem_op_data(qspi->ctrl, op, &sgt); + + return err; +} + static int stm32_qspi_tx(struct stm32_qspi *qspi, const struct spi_mem_op *op) { if (!op->data.nbytes) @@ -184,6 +271,10 @@ static int stm32_qspi_tx(struct stm32_qspi *qspi, const struct spi_mem_op *op) if (qspi->fmode == CCR_FMODE_MM) return stm32_qspi_tx_mm(qspi, op); + else if ((op->data.dir == SPI_MEM_DATA_IN && qspi->dma_chrx) || + (op->data.dir == SPI_MEM_DATA_OUT && qspi->dma_chtx)) + if (!stm32_qspi_tx_dma(qspi, op)) + return 0; return stm32_qspi_tx_poll(qspi, op); } @@ -214,7 +305,7 @@ static int stm32_qspi_wait_cmd(struct stm32_qspi *qspi, writel_relaxed(cr | CR_TCIE | CR_TEIE, qspi->io_base + QSPI_CR); if (!wait_for_completion_interruptible_timeout(&qspi->data_completion, - msecs_to_jiffies(1000))) { + msecs_to_jiffies(STM32_COMP_TIMEOUT_MS))) { err = -ETIMEDOUT; } else { sr = readl_relaxed(qspi->io_base + QSPI_SR); @@ -356,7 +447,7 @@ static int stm32_qspi_setup(struct spi_device *spi) struct spi_controller *ctrl = spi->master; struct stm32_qspi *qspi = spi_controller_get_devdata(ctrl); struct stm32_qspi_flash *flash; - u32 cr, presc; + u32 presc; if (ctrl->busy) return -EBUSY; @@ -372,17 +463,60 @@ static int stm32_qspi_setup(struct spi_device *spi) flash->presc = presc; mutex_lock(&qspi->lock); - writel_relaxed(LPTR_DFT_TIMEOUT, qspi->io_base + QSPI_LPTR); - cr = FIELD_PREP(CR_FTHRES_MASK, 3) | CR_TCEN | CR_SSHIFT | CR_EN; - writel_relaxed(cr, qspi->io_base + QSPI_CR); + qspi->cr_reg = FIELD_PREP(CR_FTHRES_MASK, 3) | CR_SSHIFT | CR_EN; + writel_relaxed(qspi->cr_reg, qspi->io_base + QSPI_CR); /* set dcr fsize to max address */ - writel_relaxed(DCR_FSIZE_MASK, qspi->io_base + QSPI_DCR); + qspi->dcr_reg = DCR_FSIZE_MASK; + writel_relaxed(qspi->dcr_reg, qspi->io_base + QSPI_DCR); mutex_unlock(&qspi->lock); return 0; } +static void stm32_qspi_dma_setup(struct stm32_qspi *qspi) +{ + struct dma_slave_config dma_cfg; + struct device *dev = qspi->dev; + + memset(&dma_cfg, 0, sizeof(dma_cfg)); + + dma_cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + dma_cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + dma_cfg.src_addr = qspi->phys_base + QSPI_DR; + dma_cfg.dst_addr = qspi->phys_base + QSPI_DR; + dma_cfg.src_maxburst = 4; + dma_cfg.dst_maxburst = 4; + + qspi->dma_chrx = dma_request_slave_channel(dev, "rx"); + if (qspi->dma_chrx) { + if (dmaengine_slave_config(qspi->dma_chrx, &dma_cfg)) { + dev_err(dev, "dma rx config failed\n"); + dma_release_channel(qspi->dma_chrx); + qspi->dma_chrx = NULL; + } + } + + qspi->dma_chtx = dma_request_slave_channel(dev, "tx"); + if (qspi->dma_chtx) { + if (dmaengine_slave_config(qspi->dma_chtx, &dma_cfg)) { + dev_err(dev, "dma tx config failed\n"); + dma_release_channel(qspi->dma_chtx); + qspi->dma_chtx = NULL; + } + } + + init_completion(&qspi->dma_completion); +} + +static void stm32_qspi_dma_free(struct stm32_qspi *qspi) +{ + if (qspi->dma_chtx) + dma_release_channel(qspi->dma_chtx); + if (qspi->dma_chrx) + dma_release_channel(qspi->dma_chrx); +} + /* * no special host constraint, so use default spi_mem_default_supports_op * to check supported mode. @@ -395,8 +529,10 @@ static void stm32_qspi_release(struct stm32_qspi *qspi) { /* disable qspi */ writel_relaxed(0, qspi->io_base + QSPI_CR); + stm32_qspi_dma_free(qspi); mutex_destroy(&qspi->lock); clk_disable_unprepare(qspi->clk); + spi_master_put(qspi->ctrl); } static int stm32_qspi_probe(struct platform_device *pdev) @@ -413,43 +549,62 @@ static int stm32_qspi_probe(struct platform_device *pdev) return -ENOMEM; qspi = spi_controller_get_devdata(ctrl); + qspi->ctrl = ctrl; res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qspi"); qspi->io_base = devm_ioremap_resource(dev, res); - if (IS_ERR(qspi->io_base)) - return PTR_ERR(qspi->io_base); + if (IS_ERR(qspi->io_base)) { + ret = PTR_ERR(qspi->io_base); + goto err; + } + + qspi->phys_base = res->start; res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qspi_mm"); qspi->mm_base = devm_ioremap_resource(dev, res); - if (IS_ERR(qspi->mm_base)) - return PTR_ERR(qspi->mm_base); + if (IS_ERR(qspi->mm_base)) { + ret = PTR_ERR(qspi->mm_base); + goto err; + } qspi->mm_size = resource_size(res); - if (qspi->mm_size > STM32_QSPI_MAX_MMAP_SZ) - return -EINVAL; + if (qspi->mm_size > STM32_QSPI_MAX_MMAP_SZ) { + ret = -EINVAL; + goto err; + } irq = platform_get_irq(pdev, 0); + if (irq < 0) { + if (irq != -EPROBE_DEFER) + dev_err(dev, "IRQ error missing or invalid\n"); + return irq; + } + ret = devm_request_irq(dev, irq, stm32_qspi_irq, 0, dev_name(dev), qspi); if (ret) { dev_err(dev, "failed to request irq\n"); - return ret; + goto err; } init_completion(&qspi->data_completion); qspi->clk = devm_clk_get(dev, NULL); - if (IS_ERR(qspi->clk)) - return PTR_ERR(qspi->clk); + if (IS_ERR(qspi->clk)) { + ret = PTR_ERR(qspi->clk); + goto err; + } qspi->clk_rate = clk_get_rate(qspi->clk); - if (!qspi->clk_rate) - return -EINVAL; + if (!qspi->clk_rate) { + ret = -EINVAL; + goto err; + } ret = clk_prepare_enable(qspi->clk); if (ret) { dev_err(dev, "can not enable the clock\n"); - return ret; + goto err; } rstc = devm_reset_control_get_exclusive(dev, NULL); @@ -461,6 +616,7 @@ static int stm32_qspi_probe(struct platform_device *pdev) qspi->dev = dev; platform_set_drvdata(pdev, qspi); + stm32_qspi_dma_setup(qspi); mutex_init(&qspi->lock); ctrl->mode_bits = SPI_RX_DUAL | SPI_RX_QUAD @@ -472,14 +628,11 @@ static int stm32_qspi_probe(struct platform_device *pdev) ctrl->dev.of_node = dev->of_node; ret = devm_spi_register_master(dev, ctrl); - if (ret) - goto err_spi_register; - - return 0; + if (!ret) + return 0; -err_spi_register: +err: stm32_qspi_release(qspi); - return ret; } @@ -491,6 +644,31 @@ static int stm32_qspi_remove(struct platform_device *pdev) return 0; } +static int __maybe_unused stm32_qspi_suspend(struct device *dev) +{ + struct stm32_qspi *qspi = dev_get_drvdata(dev); + + clk_disable_unprepare(qspi->clk); + pinctrl_pm_select_sleep_state(dev); + + return 0; +} + +static int __maybe_unused stm32_qspi_resume(struct device *dev) +{ + struct stm32_qspi *qspi = dev_get_drvdata(dev); + + pinctrl_pm_select_default_state(dev); + clk_prepare_enable(qspi->clk); + + writel_relaxed(qspi->cr_reg, qspi->io_base + QSPI_CR); + writel_relaxed(qspi->dcr_reg, qspi->io_base + QSPI_DCR); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(stm32_qspi_pm_ops, stm32_qspi_suspend, stm32_qspi_resume); + static const struct of_device_id stm32_qspi_match[] = { {.compatible = "st,stm32f469-qspi"}, {} @@ -503,6 +681,7 @@ static struct platform_driver stm32_qspi_driver = { .driver = { .name = "stm32-qspi", .of_match_table = stm32_qspi_match, + .pm = &stm32_qspi_pm_ops, }, }; module_platform_driver(stm32_qspi_driver); diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c index 4186ed20d796..b222ce8d083e 100644 --- a/drivers/spi/spi-stm32.c +++ b/drivers/spi/spi-stm32.c @@ -1839,8 +1839,9 @@ static int stm32_spi_probe(struct platform_device *pdev) spi->irq = platform_get_irq(pdev, 0); if (spi->irq <= 0) { - dev_err(&pdev->dev, "no irq: %d\n", spi->irq); - ret = -ENOENT; + ret = spi->irq; + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "failed to get irq: %d\n", ret); goto err_master_put; } ret = devm_request_threaded_irq(&pdev->dev, spi->irq, diff --git a/drivers/spi/spi-tegra114.c b/drivers/spi/spi-tegra114.c index a76acedd7e2f..b1f31bb16659 100644 --- a/drivers/spi/spi-tegra114.c +++ b/drivers/spi/spi-tegra114.c @@ -149,6 +149,8 @@ #define SPI_TX_FIFO 0x108 #define SPI_RX_FIFO 0x188 +#define SPI_INTR_MASK 0x18c +#define SPI_INTR_ALL_MASK (0x1fUL << 25) #define MAX_CHIP_SELECT 4 #define SPI_FIFO_DEPTH 64 #define DATA_DIR_TX (1 << 0) @@ -161,6 +163,10 @@ #define MAX_HOLD_CYCLES 16 #define SPI_DEFAULT_SPEED 25000000 +struct tegra_spi_soc_data { + bool has_intr_mask_reg; +}; + struct tegra_spi_data { struct device *dev; struct spi_master *master; @@ -211,6 +217,7 @@ struct tegra_spi_data { u32 *tx_dma_buf; dma_addr_t tx_dma_phys; struct dma_async_tx_descriptor *tx_dma_desc; + const struct tegra_spi_soc_data *soc_data; }; static int tegra_spi_runtime_suspend(struct device *dev); @@ -259,7 +266,8 @@ static unsigned tegra_spi_calculate_curr_xfer_param( tspi->bytes_per_word = DIV_ROUND_UP(bits_per_word, 8); - if (bits_per_word == 8 || bits_per_word == 16) { + if ((bits_per_word == 8 || bits_per_word == 16 || + bits_per_word == 32) && t->len > 3) { tspi->is_packed = 1; tspi->words_per_32bit = 32/bits_per_word; } else { @@ -307,10 +315,16 @@ static unsigned tegra_spi_fill_tx_fifo_from_client_txbuf( x |= (u32)(*tx_buf++) << (i * 8); tegra_spi_writel(tspi, x, SPI_TX_FIFO); } + + tspi->cur_tx_pos += written_words * tspi->bytes_per_word; } else { + unsigned int write_bytes; max_n_32bit = min(tspi->curr_dma_words, tx_empty_count); written_words = max_n_32bit; nbytes = written_words * tspi->bytes_per_word; + if (nbytes > t->len - tspi->cur_pos) + nbytes = t->len - tspi->cur_pos; + write_bytes = nbytes; for (count = 0; count < max_n_32bit; count++) { u32 x = 0; @@ -319,8 +333,10 @@ static unsigned tegra_spi_fill_tx_fifo_from_client_txbuf( x |= (u32)(*tx_buf++) << (i * 8); tegra_spi_writel(tspi, x, SPI_TX_FIFO); } + + tspi->cur_tx_pos += write_bytes; } - tspi->cur_tx_pos += written_words * tspi->bytes_per_word; + return written_words; } @@ -344,20 +360,27 @@ static unsigned int tegra_spi_read_rx_fifo_to_client_rxbuf( for (i = 0; len && (i < 4); i++, len--) *rx_buf++ = (x >> i*8) & 0xFF; } - tspi->cur_rx_pos += tspi->curr_dma_words * tspi->bytes_per_word; read_words += tspi->curr_dma_words; + tspi->cur_rx_pos += tspi->curr_dma_words * tspi->bytes_per_word; } else { u32 rx_mask = ((u32)1 << t->bits_per_word) - 1; + u8 bytes_per_word = tspi->bytes_per_word; + unsigned int read_bytes; + len = rx_full_count * bytes_per_word; + if (len > t->len - tspi->cur_pos) + len = t->len - tspi->cur_pos; + read_bytes = len; for (count = 0; count < rx_full_count; count++) { u32 x = tegra_spi_readl(tspi, SPI_RX_FIFO) & rx_mask; - for (i = 0; (i < tspi->bytes_per_word); i++) + for (i = 0; len && (i < bytes_per_word); i++, len--) *rx_buf++ = (x >> (i*8)) & 0xFF; } - tspi->cur_rx_pos += rx_full_count * tspi->bytes_per_word; read_words += rx_full_count; + tspi->cur_rx_pos += read_bytes; } + return read_words; } @@ -372,12 +395,17 @@ static void tegra_spi_copy_client_txbuf_to_spi_txbuf( unsigned len = tspi->curr_dma_words * tspi->bytes_per_word; memcpy(tspi->tx_dma_buf, t->tx_buf + tspi->cur_pos, len); + tspi->cur_tx_pos += tspi->curr_dma_words * tspi->bytes_per_word; } else { unsigned int i; unsigned int count; u8 *tx_buf = (u8 *)t->tx_buf + tspi->cur_tx_pos; unsigned consume = tspi->curr_dma_words * tspi->bytes_per_word; + unsigned int write_bytes; + if (consume > t->len - tspi->cur_pos) + consume = t->len - tspi->cur_pos; + write_bytes = consume; for (count = 0; count < tspi->curr_dma_words; count++) { u32 x = 0; @@ -386,8 +414,9 @@ static void tegra_spi_copy_client_txbuf_to_spi_txbuf( x |= (u32)(*tx_buf++) << (i * 8); tspi->tx_dma_buf[count] = x; } + + tspi->cur_tx_pos += write_bytes; } - tspi->cur_tx_pos += tspi->curr_dma_words * tspi->bytes_per_word; /* Make the dma buffer to read by dma */ dma_sync_single_for_device(tspi->dev, tspi->tx_dma_phys, @@ -405,20 +434,28 @@ static void tegra_spi_copy_spi_rxbuf_to_client_rxbuf( unsigned len = tspi->curr_dma_words * tspi->bytes_per_word; memcpy(t->rx_buf + tspi->cur_rx_pos, tspi->rx_dma_buf, len); + tspi->cur_rx_pos += tspi->curr_dma_words * tspi->bytes_per_word; } else { unsigned int i; unsigned int count; unsigned char *rx_buf = t->rx_buf + tspi->cur_rx_pos; u32 rx_mask = ((u32)1 << t->bits_per_word) - 1; + unsigned consume = tspi->curr_dma_words * tspi->bytes_per_word; + unsigned int read_bytes; + if (consume > t->len - tspi->cur_pos) + consume = t->len - tspi->cur_pos; + read_bytes = consume; for (count = 0; count < tspi->curr_dma_words; count++) { u32 x = tspi->rx_dma_buf[count] & rx_mask; - for (i = 0; (i < tspi->bytes_per_word); i++) + for (i = 0; consume && (i < tspi->bytes_per_word); + i++, consume--) *rx_buf++ = (x >> (i*8)) & 0xFF; } + + tspi->cur_rx_pos += read_bytes; } - tspi->cur_rx_pos += tspi->curr_dma_words * tspi->bytes_per_word; /* Make the dma buffer to read by dma */ dma_sync_single_for_device(tspi->dev, tspi->rx_dma_phys, @@ -470,22 +507,39 @@ static int tegra_spi_start_rx_dma(struct tegra_spi_data *tspi, int len) return 0; } -static int tegra_spi_start_dma_based_transfer( - struct tegra_spi_data *tspi, struct spi_transfer *t) +static int tegra_spi_flush_fifos(struct tegra_spi_data *tspi) { - u32 val; - unsigned int len; - int ret = 0; + unsigned long timeout = jiffies + HZ; u32 status; - /* Make sure that Rx and Tx fifo are empty */ status = tegra_spi_readl(tspi, SPI_FIFO_STATUS); if ((status & SPI_FIFO_EMPTY) != SPI_FIFO_EMPTY) { - dev_err(tspi->dev, "Rx/Tx fifo are not empty status 0x%08x\n", - (unsigned)status); - return -EIO; + status |= SPI_RX_FIFO_FLUSH | SPI_TX_FIFO_FLUSH; + tegra_spi_writel(tspi, status, SPI_FIFO_STATUS); + while ((status & SPI_FIFO_EMPTY) != SPI_FIFO_EMPTY) { + status = tegra_spi_readl(tspi, SPI_FIFO_STATUS); + if (time_after(jiffies, timeout)) { + dev_err(tspi->dev, + "timeout waiting for fifo flush\n"); + return -EIO; + } + + udelay(1); + } } + return 0; +} + +static int tegra_spi_start_dma_based_transfer( + struct tegra_spi_data *tspi, struct spi_transfer *t) +{ + u32 val; + unsigned int len; + int ret = 0; + u8 dma_burst; + struct dma_slave_config dma_sconfig = {0}; + val = SPI_DMA_BLK_SET(tspi->curr_dma_words - 1); tegra_spi_writel(tspi, val, SPI_DMA_BLK); @@ -496,23 +550,40 @@ static int tegra_spi_start_dma_based_transfer( len = tspi->curr_dma_words * 4; /* Set attention level based on length of transfer */ - if (len & 0xF) + if (len & 0xF) { val |= SPI_TX_TRIG_1 | SPI_RX_TRIG_1; - else if (((len) >> 4) & 0x1) + dma_burst = 1; + } else if (((len) >> 4) & 0x1) { val |= SPI_TX_TRIG_4 | SPI_RX_TRIG_4; - else + dma_burst = 4; + } else { val |= SPI_TX_TRIG_8 | SPI_RX_TRIG_8; + dma_burst = 8; + } - if (tspi->cur_direction & DATA_DIR_TX) - val |= SPI_IE_TX; + if (!tspi->soc_data->has_intr_mask_reg) { + if (tspi->cur_direction & DATA_DIR_TX) + val |= SPI_IE_TX; - if (tspi->cur_direction & DATA_DIR_RX) - val |= SPI_IE_RX; + if (tspi->cur_direction & DATA_DIR_RX) + val |= SPI_IE_RX; + } tegra_spi_writel(tspi, val, SPI_DMA_CTL); tspi->dma_control_reg = val; + dma_sconfig.device_fc = true; if (tspi->cur_direction & DATA_DIR_TX) { + dma_sconfig.dst_addr = tspi->phys + SPI_TX_FIFO; + dma_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + dma_sconfig.dst_maxburst = dma_burst; + ret = dmaengine_slave_config(tspi->tx_dma_chan, &dma_sconfig); + if (ret < 0) { + dev_err(tspi->dev, + "DMA slave config failed: %d\n", ret); + return ret; + } + tegra_spi_copy_client_txbuf_to_spi_txbuf(tspi, t); ret = tegra_spi_start_tx_dma(tspi, len); if (ret < 0) { @@ -523,6 +594,16 @@ static int tegra_spi_start_dma_based_transfer( } if (tspi->cur_direction & DATA_DIR_RX) { + dma_sconfig.src_addr = tspi->phys + SPI_RX_FIFO; + dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + dma_sconfig.src_maxburst = dma_burst; + ret = dmaengine_slave_config(tspi->rx_dma_chan, &dma_sconfig); + if (ret < 0) { + dev_err(tspi->dev, + "DMA slave config failed: %d\n", ret); + return ret; + } + /* Make the dma buffer to read by dma */ dma_sync_single_for_device(tspi->dev, tspi->rx_dma_phys, tspi->dma_buf_size, DMA_FROM_DEVICE); @@ -570,8 +651,9 @@ static int tegra_spi_start_cpu_based_transfer( tspi->is_curr_dma_xfer = false; - val |= SPI_DMA_EN; - tegra_spi_writel(tspi, val, SPI_DMA_CTL); + val = tspi->command1_reg; + val |= SPI_PIO; + tegra_spi_writel(tspi, val, SPI_COMMAND1); return 0; } @@ -582,7 +664,6 @@ static int tegra_spi_init_dma_param(struct tegra_spi_data *tspi, u32 *dma_buf; dma_addr_t dma_phys; int ret; - struct dma_slave_config dma_sconfig; dma_chan = dma_request_slave_channel_reason(tspi->dev, dma_to_memory ? "rx" : "tx"); @@ -603,19 +684,6 @@ static int tegra_spi_init_dma_param(struct tegra_spi_data *tspi, } if (dma_to_memory) { - dma_sconfig.src_addr = tspi->phys + SPI_RX_FIFO; - dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; - dma_sconfig.src_maxburst = 0; - } else { - dma_sconfig.dst_addr = tspi->phys + SPI_TX_FIFO; - dma_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; - dma_sconfig.dst_maxburst = 0; - } - - ret = dmaengine_slave_config(dma_chan, &dma_sconfig); - if (ret) - goto scrub; - if (dma_to_memory) { tspi->rx_dma_chan = dma_chan; tspi->rx_dma_buf = dma_buf; tspi->rx_dma_phys = dma_phys; @@ -625,11 +693,6 @@ static int tegra_spi_init_dma_param(struct tegra_spi_data *tspi, tspi->tx_dma_phys = dma_phys; } return 0; - -scrub: - dma_free_coherent(tspi->dev, tspi->dma_buf_size, dma_buf, dma_phys); - dma_release_channel(dma_chan); - return ret; } static void tegra_spi_deinit_dma_param(struct tegra_spi_data *tspi, @@ -696,6 +759,16 @@ static u32 tegra_spi_setup_transfer_one(struct spi_device *spi, else if (req_mode == SPI_MODE_3) command1 |= SPI_CONTROL_MODE_3; + if (spi->mode & SPI_LSB_FIRST) + command1 |= SPI_LSBIT_FE; + else + command1 &= ~SPI_LSBIT_FE; + + if (spi->mode & SPI_3WIRE) + command1 |= SPI_BIDIROE; + else + command1 &= ~SPI_BIDIROE; + if (tspi->cs_control) { if (tspi->cs_control != spi) tegra_spi_writel(tspi, command1, SPI_COMMAND1); @@ -728,8 +801,15 @@ static int tegra_spi_start_transfer_one(struct spi_device *spi, total_fifo_words = tegra_spi_calculate_curr_xfer_param(spi, tspi, t); + if (t->rx_nbits == SPI_NBITS_DUAL || t->tx_nbits == SPI_NBITS_DUAL) + command1 |= SPI_BOTH_EN_BIT; + else + command1 &= ~SPI_BOTH_EN_BIT; + if (tspi->is_packed) command1 |= SPI_PACKED; + else + command1 &= ~SPI_PACKED; command1 &= ~(SPI_CS_SEL_MASK | SPI_TX_EN | SPI_RX_EN); tspi->cur_direction = 0; @@ -748,6 +828,9 @@ static int tegra_spi_start_transfer_one(struct spi_device *spi, dev_dbg(tspi->dev, "The def 0x%x and written 0x%x\n", tspi->def_command1_reg, (unsigned)command1); + ret = tegra_spi_flush_fifos(tspi); + if (ret < 0) + return ret; if (total_fifo_words > SPI_FIFO_DEPTH) ret = tegra_spi_start_dma_based_transfer(tspi, t); else @@ -774,6 +857,12 @@ static int tegra_spi_setup(struct spi_device *spi) return ret; } + if (tspi->soc_data->has_intr_mask_reg) { + val = tegra_spi_readl(tspi, SPI_INTR_MASK); + val &= ~SPI_INTR_ALL_MASK; + tegra_spi_writel(tspi, val, SPI_INTR_MASK); + } + spin_lock_irqsave(&tspi->lock, flags); val = tspi->def_command1_reg; if (spi->mode & SPI_CS_HIGH) @@ -799,6 +888,33 @@ static void tegra_spi_transfer_delay(int delay) udelay(delay % 1000); } +static void tegra_spi_transfer_end(struct spi_device *spi) +{ + struct tegra_spi_data *tspi = spi_master_get_devdata(spi->master); + int cs_val = (spi->mode & SPI_CS_HIGH) ? 0 : 1; + + if (cs_val) + tspi->command1_reg |= SPI_CS_SW_VAL; + else + tspi->command1_reg &= ~SPI_CS_SW_VAL; + tegra_spi_writel(tspi, tspi->command1_reg, SPI_COMMAND1); + tegra_spi_writel(tspi, tspi->def_command1_reg, SPI_COMMAND1); +} + +static void tegra_spi_dump_regs(struct tegra_spi_data *tspi) +{ + dev_dbg(tspi->dev, "============ SPI REGISTER DUMP ============\n"); + dev_dbg(tspi->dev, "Command1: 0x%08x | Command2: 0x%08x\n", + tegra_spi_readl(tspi, SPI_COMMAND1), + tegra_spi_readl(tspi, SPI_COMMAND2)); + dev_dbg(tspi->dev, "DMA_CTL: 0x%08x | DMA_BLK: 0x%08x\n", + tegra_spi_readl(tspi, SPI_DMA_CTL), + tegra_spi_readl(tspi, SPI_DMA_BLK)); + dev_dbg(tspi->dev, "TRANS_STAT: 0x%08x | FIFO_STATUS: 0x%08x\n", + tegra_spi_readl(tspi, SPI_TRANS_STATUS), + tegra_spi_readl(tspi, SPI_FIFO_STATUS)); +} + static int tegra_spi_transfer_one_message(struct spi_master *master, struct spi_message *msg) { @@ -838,21 +954,32 @@ static int tegra_spi_transfer_one_message(struct spi_master *master, if (WARN_ON(ret == 0)) { dev_err(tspi->dev, "spi transfer timeout, err %d\n", ret); + if (tspi->is_curr_dma_xfer && + (tspi->cur_direction & DATA_DIR_TX)) + dmaengine_terminate_all(tspi->tx_dma_chan); + if (tspi->is_curr_dma_xfer && + (tspi->cur_direction & DATA_DIR_RX)) + dmaengine_terminate_all(tspi->rx_dma_chan); ret = -EIO; + tegra_spi_dump_regs(tspi); + tegra_spi_flush_fifos(tspi); + reset_control_assert(tspi->rst); + udelay(2); + reset_control_deassert(tspi->rst); goto complete_xfer; } if (tspi->tx_status || tspi->rx_status) { dev_err(tspi->dev, "Error in Transfer\n"); ret = -EIO; + tegra_spi_dump_regs(tspi); goto complete_xfer; } msg->actual_length += xfer->len; complete_xfer: if (ret < 0 || skip) { - tegra_spi_writel(tspi, tspi->def_command1_reg, - SPI_COMMAND1); + tegra_spi_transfer_end(spi); tegra_spi_transfer_delay(xfer->delay_usecs); goto exit; } else if (list_is_last(&xfer->transfer_list, @@ -860,13 +987,11 @@ complete_xfer: if (xfer->cs_change) tspi->cs_control = spi; else { - tegra_spi_writel(tspi, tspi->def_command1_reg, - SPI_COMMAND1); + tegra_spi_transfer_end(spi); tegra_spi_transfer_delay(xfer->delay_usecs); } } else if (xfer->cs_change) { - tegra_spi_writel(tspi, tspi->def_command1_reg, - SPI_COMMAND1); + tegra_spi_transfer_end(spi); tegra_spi_transfer_delay(xfer->delay_usecs); } @@ -889,11 +1014,14 @@ static irqreturn_t handle_cpu_based_xfer(struct tegra_spi_data *tspi) tspi->status_reg); dev_err(tspi->dev, "CpuXfer 0x%08x:0x%08x\n", tspi->command1_reg, tspi->dma_control_reg); + tegra_spi_dump_regs(tspi); + tegra_spi_flush_fifos(tspi); + complete(&tspi->xfer_completion); + spin_unlock_irqrestore(&tspi->lock, flags); reset_control_assert(tspi->rst); udelay(2); reset_control_deassert(tspi->rst); - complete(&tspi->xfer_completion); - goto exit; + return IRQ_HANDLED; } if (tspi->cur_direction & DATA_DIR_RX) @@ -961,11 +1089,13 @@ static irqreturn_t handle_dma_based_xfer(struct tegra_spi_data *tspi) tspi->status_reg); dev_err(tspi->dev, "DmaXfer 0x%08x:0x%08x\n", tspi->command1_reg, tspi->dma_control_reg); + tegra_spi_dump_regs(tspi); + tegra_spi_flush_fifos(tspi); + complete(&tspi->xfer_completion); + spin_unlock_irqrestore(&tspi->lock, flags); reset_control_assert(tspi->rst); udelay(2); reset_control_deassert(tspi->rst); - complete(&tspi->xfer_completion); - spin_unlock_irqrestore(&tspi->lock, flags); return IRQ_HANDLED; } @@ -1021,8 +1151,29 @@ static irqreturn_t tegra_spi_isr(int irq, void *context_data) return IRQ_WAKE_THREAD; } +static struct tegra_spi_soc_data tegra114_spi_soc_data = { + .has_intr_mask_reg = false, +}; + +static struct tegra_spi_soc_data tegra124_spi_soc_data = { + .has_intr_mask_reg = false, +}; + +static struct tegra_spi_soc_data tegra210_spi_soc_data = { + .has_intr_mask_reg = true, +}; + static const struct of_device_id tegra_spi_of_match[] = { - { .compatible = "nvidia,tegra114-spi", }, + { + .compatible = "nvidia,tegra114-spi", + .data = &tegra114_spi_soc_data, + }, { + .compatible = "nvidia,tegra124-spi", + .data = &tegra124_spi_soc_data, + }, { + .compatible = "nvidia,tegra210-spi", + .data = &tegra210_spi_soc_data, + }, {} }; MODULE_DEVICE_TABLE(of, tegra_spi_of_match); @@ -1033,6 +1184,7 @@ static int tegra_spi_probe(struct platform_device *pdev) struct tegra_spi_data *tspi; struct resource *r; int ret, spi_irq; + int bus_num; master = spi_alloc_master(&pdev->dev, sizeof(*tspi)); if (!master) { @@ -1047,16 +1199,28 @@ static int tegra_spi_probe(struct platform_device *pdev) master->max_speed_hz = 25000000; /* 25MHz */ /* the spi->mode bits understood by this driver: */ - master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST | + SPI_TX_DUAL | SPI_RX_DUAL | SPI_3WIRE; + master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32); master->setup = tegra_spi_setup; master->transfer_one_message = tegra_spi_transfer_one_message; master->num_chipselect = MAX_CHIP_SELECT; master->auto_runtime_pm = true; + bus_num = of_alias_get_id(pdev->dev.of_node, "spi"); + if (bus_num >= 0) + master->bus_num = bus_num; tspi->master = master; tspi->dev = &pdev->dev; spin_lock_init(&tspi->lock); + tspi->soc_data = of_device_get_match_data(&pdev->dev); + if (!tspi->soc_data) { + dev_err(&pdev->dev, "unsupported tegra\n"); + ret = -ENODEV; + goto exit_free_master; + } + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); tspi->base = devm_ioremap_resource(&pdev->dev, r); if (IS_ERR(tspi->base)) { @@ -1067,27 +1231,19 @@ static int tegra_spi_probe(struct platform_device *pdev) spi_irq = platform_get_irq(pdev, 0); tspi->irq = spi_irq; - ret = request_threaded_irq(tspi->irq, tegra_spi_isr, - tegra_spi_isr_thread, IRQF_ONESHOT, - dev_name(&pdev->dev), tspi); - if (ret < 0) { - dev_err(&pdev->dev, "Failed to register ISR for IRQ %d\n", - tspi->irq); - goto exit_free_master; - } tspi->clk = devm_clk_get(&pdev->dev, "spi"); if (IS_ERR(tspi->clk)) { dev_err(&pdev->dev, "can not get clock\n"); ret = PTR_ERR(tspi->clk); - goto exit_free_irq; + goto exit_free_master; } tspi->rst = devm_reset_control_get_exclusive(&pdev->dev, "spi"); if (IS_ERR(tspi->rst)) { dev_err(&pdev->dev, "can not get reset\n"); ret = PTR_ERR(tspi->rst); - goto exit_free_irq; + goto exit_free_master; } tspi->max_buf_size = SPI_FIFO_DEPTH << 2; @@ -1095,7 +1251,7 @@ static int tegra_spi_probe(struct platform_device *pdev) ret = tegra_spi_init_dma_param(tspi, true); if (ret < 0) - goto exit_free_irq; + goto exit_free_master; ret = tegra_spi_init_dma_param(tspi, false); if (ret < 0) goto exit_rx_dma_free; @@ -1117,18 +1273,32 @@ static int tegra_spi_probe(struct platform_device *pdev) dev_err(&pdev->dev, "pm runtime get failed, e = %d\n", ret); goto exit_pm_disable; } + + reset_control_assert(tspi->rst); + udelay(2); + reset_control_deassert(tspi->rst); tspi->def_command1_reg = SPI_M_S; tegra_spi_writel(tspi, tspi->def_command1_reg, SPI_COMMAND1); pm_runtime_put(&pdev->dev); + ret = request_threaded_irq(tspi->irq, tegra_spi_isr, + tegra_spi_isr_thread, IRQF_ONESHOT, + dev_name(&pdev->dev), tspi); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to register ISR for IRQ %d\n", + tspi->irq); + goto exit_pm_disable; + } master->dev.of_node = pdev->dev.of_node; ret = devm_spi_register_master(&pdev->dev, master); if (ret < 0) { dev_err(&pdev->dev, "can not register to master err %d\n", ret); - goto exit_pm_disable; + goto exit_free_irq; } return ret; +exit_free_irq: + free_irq(spi_irq, tspi); exit_pm_disable: pm_runtime_disable(&pdev->dev); if (!pm_runtime_status_suspended(&pdev->dev)) @@ -1136,8 +1306,6 @@ exit_pm_disable: tegra_spi_deinit_dma_param(tspi, false); exit_rx_dma_free: tegra_spi_deinit_dma_param(tspi, true); -exit_free_irq: - free_irq(spi_irq, tspi); exit_free_master: spi_master_put(master); return ret; diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c index 1427f343b39a..6d4679126213 100644 --- a/drivers/spi/spi-tegra20-slink.c +++ b/drivers/spi/spi-tegra20-slink.c @@ -717,9 +717,6 @@ static int tegra_slink_start_transfer_one(struct spi_device *spi, command2 = tspi->command2_reg; command2 &= ~(SLINK_RXEN | SLINK_TXEN); - tegra_slink_writel(tspi, command, SLINK_COMMAND); - tspi->command_reg = command; - tspi->cur_direction = 0; if (t->rx_buf) { command2 |= SLINK_RXEN; @@ -729,9 +726,18 @@ static int tegra_slink_start_transfer_one(struct spi_device *spi, command2 |= SLINK_TXEN; tspi->cur_direction |= DATA_DIR_TX; } + + /* + * Writing to the command2 register bevore the command register prevents + * a spike in chip_select line 0. This selects the chip_select line + * before changing the chip_select value. + */ tegra_slink_writel(tspi, command2, SLINK_COMMAND2); tspi->command2_reg = command2; + tegra_slink_writel(tspi, command, SLINK_COMMAND); + tspi->command_reg = command; + if (total_fifo_words > SLINK_FIFO_DEPTH) ret = tegra_slink_start_dma_based_transfer(tspi, t); else diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c index fba3f180f233..8a5966963834 100644 --- a/drivers/spi/spi-topcliff-pch.c +++ b/drivers/spi/spi-topcliff-pch.c @@ -1299,18 +1299,27 @@ static void pch_free_dma_buf(struct pch_spi_board_data *board_dat, dma->rx_buf_virt, dma->rx_buf_dma); } -static void pch_alloc_dma_buf(struct pch_spi_board_data *board_dat, +static int pch_alloc_dma_buf(struct pch_spi_board_data *board_dat, struct pch_spi_data *data) { struct pch_spi_dma_ctrl *dma; + int ret; dma = &data->dma; + ret = 0; /* Get Consistent memory for Tx DMA */ dma->tx_buf_virt = dma_alloc_coherent(&board_dat->pdev->dev, PCH_BUF_SIZE, &dma->tx_buf_dma, GFP_KERNEL); + if (!dma->tx_buf_virt) + ret = -ENOMEM; + /* Get Consistent memory for Rx DMA */ dma->rx_buf_virt = dma_alloc_coherent(&board_dat->pdev->dev, PCH_BUF_SIZE, &dma->rx_buf_dma, GFP_KERNEL); + if (!dma->rx_buf_virt) + ret = -ENOMEM; + + return ret; } static int pch_spi_pd_probe(struct platform_device *plat_dev) @@ -1387,7 +1396,9 @@ static int pch_spi_pd_probe(struct platform_device *plat_dev) if (use_dma) { dev_info(&plat_dev->dev, "Use DMA for data transfers\n"); - pch_alloc_dma_buf(board_dat, data); + ret = pch_alloc_dma_buf(board_dat, data); + if (ret) + goto err_spi_register_master; } ret = spi_register_master(master); diff --git a/drivers/spi/spi-zynq-qspi.c b/drivers/spi/spi-zynq-qspi.c new file mode 100644 index 000000000000..c6bee67decb5 --- /dev/null +++ b/drivers/spi/spi-zynq-qspi.c @@ -0,0 +1,761 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Xilinx, Inc. + * + * Author: Naga Sureshkumar Relli <nagasure@xilinx.com> + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_irq.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/workqueue.h> +#include <linux/spi/spi-mem.h> + +/* Register offset definitions */ +#define ZYNQ_QSPI_CONFIG_OFFSET 0x00 /* Configuration Register, RW */ +#define ZYNQ_QSPI_STATUS_OFFSET 0x04 /* Interrupt Status Register, RO */ +#define ZYNQ_QSPI_IEN_OFFSET 0x08 /* Interrupt Enable Register, WO */ +#define ZYNQ_QSPI_IDIS_OFFSET 0x0C /* Interrupt Disable Reg, WO */ +#define ZYNQ_QSPI_IMASK_OFFSET 0x10 /* Interrupt Enabled Mask Reg,RO */ +#define ZYNQ_QSPI_ENABLE_OFFSET 0x14 /* Enable/Disable Register, RW */ +#define ZYNQ_QSPI_DELAY_OFFSET 0x18 /* Delay Register, RW */ +#define ZYNQ_QSPI_TXD_00_00_OFFSET 0x1C /* Transmit 4-byte inst, WO */ +#define ZYNQ_QSPI_TXD_00_01_OFFSET 0x80 /* Transmit 1-byte inst, WO */ +#define ZYNQ_QSPI_TXD_00_10_OFFSET 0x84 /* Transmit 2-byte inst, WO */ +#define ZYNQ_QSPI_TXD_00_11_OFFSET 0x88 /* Transmit 3-byte inst, WO */ +#define ZYNQ_QSPI_RXD_OFFSET 0x20 /* Data Receive Register, RO */ +#define ZYNQ_QSPI_SIC_OFFSET 0x24 /* Slave Idle Count Register, RW */ +#define ZYNQ_QSPI_TX_THRESH_OFFSET 0x28 /* TX FIFO Watermark Reg, RW */ +#define ZYNQ_QSPI_RX_THRESH_OFFSET 0x2C /* RX FIFO Watermark Reg, RW */ +#define ZYNQ_QSPI_GPIO_OFFSET 0x30 /* GPIO Register, RW */ +#define ZYNQ_QSPI_LINEAR_CFG_OFFSET 0xA0 /* Linear Adapter Config Ref, RW */ +#define ZYNQ_QSPI_MOD_ID_OFFSET 0xFC /* Module ID Register, RO */ + +/* + * QSPI Configuration Register bit Masks + * + * This register contains various control bits that effect the operation + * of the QSPI controller + */ +#define ZYNQ_QSPI_CONFIG_IFMODE_MASK BIT(31) /* Flash Memory Interface */ +#define ZYNQ_QSPI_CONFIG_MANSRT_MASK BIT(16) /* Manual TX Start */ +#define ZYNQ_QSPI_CONFIG_MANSRTEN_MASK BIT(15) /* Enable Manual TX Mode */ +#define ZYNQ_QSPI_CONFIG_SSFORCE_MASK BIT(14) /* Manual Chip Select */ +#define ZYNQ_QSPI_CONFIG_BDRATE_MASK GENMASK(5, 3) /* Baud Rate Mask */ +#define ZYNQ_QSPI_CONFIG_CPHA_MASK BIT(2) /* Clock Phase Control */ +#define ZYNQ_QSPI_CONFIG_CPOL_MASK BIT(1) /* Clock Polarity Control */ +#define ZYNQ_QSPI_CONFIG_SSCTRL_MASK BIT(10) /* Slave Select Mask */ +#define ZYNQ_QSPI_CONFIG_FWIDTH_MASK GENMASK(7, 6) /* FIFO width */ +#define ZYNQ_QSPI_CONFIG_MSTREN_MASK BIT(0) /* Master Mode */ + +/* + * QSPI Configuration Register - Baud rate and slave select + * + * These are the values used in the calculation of baud rate divisor and + * setting the slave select. + */ +#define ZYNQ_QSPI_BAUD_DIV_MAX GENMASK(2, 0) /* Baud rate maximum */ +#define ZYNQ_QSPI_BAUD_DIV_SHIFT 3 /* Baud rate divisor shift in CR */ +#define ZYNQ_QSPI_SS_SHIFT 10 /* Slave Select field shift in CR */ + +/* + * QSPI Interrupt Registers bit Masks + * + * All the four interrupt registers (Status/Mask/Enable/Disable) have the same + * bit definitions. + */ +#define ZYNQ_QSPI_IXR_RX_OVERFLOW_MASK BIT(0) /* QSPI RX FIFO Overflow */ +#define ZYNQ_QSPI_IXR_TXNFULL_MASK BIT(2) /* QSPI TX FIFO Overflow */ +#define ZYNQ_QSPI_IXR_TXFULL_MASK BIT(3) /* QSPI TX FIFO is full */ +#define ZYNQ_QSPI_IXR_RXNEMTY_MASK BIT(4) /* QSPI RX FIFO Not Empty */ +#define ZYNQ_QSPI_IXR_RXF_FULL_MASK BIT(5) /* QSPI RX FIFO is full */ +#define ZYNQ_QSPI_IXR_TXF_UNDRFLOW_MASK BIT(6) /* QSPI TX FIFO Underflow */ +#define ZYNQ_QSPI_IXR_ALL_MASK (ZYNQ_QSPI_IXR_RX_OVERFLOW_MASK | \ + ZYNQ_QSPI_IXR_TXNFULL_MASK | \ + ZYNQ_QSPI_IXR_TXFULL_MASK | \ + ZYNQ_QSPI_IXR_RXNEMTY_MASK | \ + ZYNQ_QSPI_IXR_RXF_FULL_MASK | \ + ZYNQ_QSPI_IXR_TXF_UNDRFLOW_MASK) +#define ZYNQ_QSPI_IXR_RXTX_MASK (ZYNQ_QSPI_IXR_TXNFULL_MASK | \ + ZYNQ_QSPI_IXR_RXNEMTY_MASK) + +/* + * QSPI Enable Register bit Masks + * + * This register is used to enable or disable the QSPI controller + */ +#define ZYNQ_QSPI_ENABLE_ENABLE_MASK BIT(0) /* QSPI Enable Bit Mask */ + +/* + * QSPI Linear Configuration Register + * + * It is named Linear Configuration but it controls other modes when not in + * linear mode also. + */ +#define ZYNQ_QSPI_LCFG_TWO_MEM_MASK BIT(30) /* LQSPI Two memories Mask */ +#define ZYNQ_QSPI_LCFG_SEP_BUS_MASK BIT(29) /* LQSPI Separate bus Mask */ +#define ZYNQ_QSPI_LCFG_U_PAGE_MASK BIT(28) /* LQSPI Upper Page Mask */ + +#define ZYNQ_QSPI_LCFG_DUMMY_SHIFT 8 + +#define ZYNQ_QSPI_FAST_READ_QOUT_CODE 0x6B /* read instruction code */ +#define ZYNQ_QSPI_FIFO_DEPTH 63 /* FIFO depth in words */ +#define ZYNQ_QSPI_RX_THRESHOLD 32 /* Rx FIFO threshold level */ +#define ZYNQ_QSPI_TX_THRESHOLD 1 /* Tx FIFO threshold level */ + +/* + * The modebits configurable by the driver to make the SPI support different + * data formats + */ +#define ZYNQ_QSPI_MODEBITS (SPI_CPOL | SPI_CPHA) + +/* Default number of chip selects */ +#define ZYNQ_QSPI_DEFAULT_NUM_CS 1 + +/** + * struct zynq_qspi - Defines qspi driver instance + * @regs: Virtual address of the QSPI controller registers + * @refclk: Pointer to the peripheral clock + * @pclk: Pointer to the APB clock + * @irq: IRQ number + * @txbuf: Pointer to the TX buffer + * @rxbuf: Pointer to the RX buffer + * @tx_bytes: Number of bytes left to transfer + * @rx_bytes: Number of bytes left to receive + * @data_completion: completion structure + */ +struct zynq_qspi { + struct device *dev; + void __iomem *regs; + struct clk *refclk; + struct clk *pclk; + int irq; + u8 *txbuf; + u8 *rxbuf; + int tx_bytes; + int rx_bytes; + struct completion data_completion; +}; + +/* + * Inline functions for the QSPI controller read/write + */ +static inline u32 zynq_qspi_read(struct zynq_qspi *xqspi, u32 offset) +{ + return readl_relaxed(xqspi->regs + offset); +} + +static inline void zynq_qspi_write(struct zynq_qspi *xqspi, u32 offset, + u32 val) +{ + writel_relaxed(val, xqspi->regs + offset); +} + +/** + * zynq_qspi_init_hw - Initialize the hardware + * @xqspi: Pointer to the zynq_qspi structure + * + * The default settings of the QSPI controller's configurable parameters on + * reset are + * - Master mode + * - Baud rate divisor is set to 2 + * - Tx threshold set to 1l Rx threshold set to 32 + * - Flash memory interface mode enabled + * - Size of the word to be transferred as 8 bit + * This function performs the following actions + * - Disable and clear all the interrupts + * - Enable manual slave select + * - Enable manual start + * - Deselect all the chip select lines + * - Set the size of the word to be transferred as 32 bit + * - Set the little endian mode of TX FIFO and + * - Enable the QSPI controller + */ +static void zynq_qspi_init_hw(struct zynq_qspi *xqspi) +{ + u32 config_reg; + + zynq_qspi_write(xqspi, ZYNQ_QSPI_ENABLE_OFFSET, 0); + zynq_qspi_write(xqspi, ZYNQ_QSPI_IDIS_OFFSET, ZYNQ_QSPI_IXR_ALL_MASK); + + /* Disable linear mode as the boot loader may have used it */ + zynq_qspi_write(xqspi, ZYNQ_QSPI_LINEAR_CFG_OFFSET, 0); + + /* Clear the RX FIFO */ + while (zynq_qspi_read(xqspi, ZYNQ_QSPI_STATUS_OFFSET) & + ZYNQ_QSPI_IXR_RXNEMTY_MASK) + zynq_qspi_read(xqspi, ZYNQ_QSPI_RXD_OFFSET); + + zynq_qspi_write(xqspi, ZYNQ_QSPI_STATUS_OFFSET, ZYNQ_QSPI_IXR_ALL_MASK); + config_reg = zynq_qspi_read(xqspi, ZYNQ_QSPI_CONFIG_OFFSET); + config_reg &= ~(ZYNQ_QSPI_CONFIG_MSTREN_MASK | + ZYNQ_QSPI_CONFIG_CPOL_MASK | + ZYNQ_QSPI_CONFIG_CPHA_MASK | + ZYNQ_QSPI_CONFIG_BDRATE_MASK | + ZYNQ_QSPI_CONFIG_SSFORCE_MASK | + ZYNQ_QSPI_CONFIG_MANSRTEN_MASK | + ZYNQ_QSPI_CONFIG_MANSRT_MASK); + config_reg |= (ZYNQ_QSPI_CONFIG_MSTREN_MASK | + ZYNQ_QSPI_CONFIG_SSFORCE_MASK | + ZYNQ_QSPI_CONFIG_FWIDTH_MASK | + ZYNQ_QSPI_CONFIG_IFMODE_MASK); + zynq_qspi_write(xqspi, ZYNQ_QSPI_CONFIG_OFFSET, config_reg); + + zynq_qspi_write(xqspi, ZYNQ_QSPI_RX_THRESH_OFFSET, + ZYNQ_QSPI_RX_THRESHOLD); + zynq_qspi_write(xqspi, ZYNQ_QSPI_TX_THRESH_OFFSET, + ZYNQ_QSPI_TX_THRESHOLD); + + zynq_qspi_write(xqspi, ZYNQ_QSPI_ENABLE_OFFSET, + ZYNQ_QSPI_ENABLE_ENABLE_MASK); +} + +static bool zynq_qspi_supports_op(struct spi_mem *mem, + const struct spi_mem_op *op) +{ + if (!spi_mem_default_supports_op(mem, op)) + return false; + + /* + * The number of address bytes should be equal to or less than 3 bytes. + */ + if (op->addr.nbytes > 3) + return false; + + return true; +} + +/** + * zynq_qspi_rxfifo_op - Read 1..4 bytes from RxFIFO to RX buffer + * @xqspi: Pointer to the zynq_qspi structure + * @size: Number of bytes to be read (1..4) + */ +static void zynq_qspi_rxfifo_op(struct zynq_qspi *xqspi, unsigned int size) +{ + u32 data; + + data = zynq_qspi_read(xqspi, ZYNQ_QSPI_RXD_OFFSET); + + if (xqspi->rxbuf) { + memcpy(xqspi->rxbuf, ((u8 *)&data) + 4 - size, size); + xqspi->rxbuf += size; + } + + xqspi->rx_bytes -= size; + if (xqspi->rx_bytes < 0) + xqspi->rx_bytes = 0; +} + +/** + * zynq_qspi_txfifo_op - Write 1..4 bytes from TX buffer to TxFIFO + * @xqspi: Pointer to the zynq_qspi structure + * @size: Number of bytes to be written (1..4) + */ +static void zynq_qspi_txfifo_op(struct zynq_qspi *xqspi, unsigned int size) +{ + static const unsigned int offset[4] = { + ZYNQ_QSPI_TXD_00_01_OFFSET, ZYNQ_QSPI_TXD_00_10_OFFSET, + ZYNQ_QSPI_TXD_00_11_OFFSET, ZYNQ_QSPI_TXD_00_00_OFFSET }; + u32 data; + + if (xqspi->txbuf) { + data = 0xffffffff; + memcpy(&data, xqspi->txbuf, size); + xqspi->txbuf += size; + } else { + data = 0; + } + + xqspi->tx_bytes -= size; + zynq_qspi_write(xqspi, offset[size - 1], data); +} + +/** + * zynq_qspi_chipselect - Select or deselect the chip select line + * @spi: Pointer to the spi_device structure + * @assert: 1 for select or 0 for deselect the chip select line + */ +static void zynq_qspi_chipselect(struct spi_device *spi, bool assert) +{ + struct spi_controller *ctrl = spi->master; + struct zynq_qspi *xqspi = spi_controller_get_devdata(ctrl); + u32 config_reg; + + config_reg = zynq_qspi_read(xqspi, ZYNQ_QSPI_CONFIG_OFFSET); + if (assert) { + /* Select the slave */ + config_reg &= ~ZYNQ_QSPI_CONFIG_SSCTRL_MASK; + config_reg |= (((~(BIT(spi->chip_select))) << + ZYNQ_QSPI_SS_SHIFT) & + ZYNQ_QSPI_CONFIG_SSCTRL_MASK); + } else { + config_reg |= ZYNQ_QSPI_CONFIG_SSCTRL_MASK; + } + + zynq_qspi_write(xqspi, ZYNQ_QSPI_CONFIG_OFFSET, config_reg); +} + +/** + * zynq_qspi_config_op - Configure QSPI controller for specified transfer + * @xqspi: Pointer to the zynq_qspi structure + * @qspi: Pointer to the spi_device structure + * + * Sets the operational mode of QSPI controller for the next QSPI transfer and + * sets the requested clock frequency. + * + * Return: 0 on success and -EINVAL on invalid input parameter + * + * Note: If the requested frequency is not an exact match with what can be + * obtained using the prescalar value, the driver sets the clock frequency which + * is lower than the requested frequency (maximum lower) for the transfer. If + * the requested frequency is higher or lower than that is supported by the QSPI + * controller the driver will set the highest or lowest frequency supported by + * controller. + */ +static int zynq_qspi_config_op(struct zynq_qspi *xqspi, struct spi_device *spi) +{ + u32 config_reg, baud_rate_val = 0; + + /* + * Set the clock frequency + * The baud rate divisor is not a direct mapping to the value written + * into the configuration register (config_reg[5:3]) + * i.e. 000 - divide by 2 + * 001 - divide by 4 + * ---------------- + * 111 - divide by 256 + */ + while ((baud_rate_val < ZYNQ_QSPI_BAUD_DIV_MAX) && + (clk_get_rate(xqspi->refclk) / (2 << baud_rate_val)) > + spi->max_speed_hz) + baud_rate_val++; + + config_reg = zynq_qspi_read(xqspi, ZYNQ_QSPI_CONFIG_OFFSET); + + /* Set the QSPI clock phase and clock polarity */ + config_reg &= (~ZYNQ_QSPI_CONFIG_CPHA_MASK) & + (~ZYNQ_QSPI_CONFIG_CPOL_MASK); + if (spi->mode & SPI_CPHA) + config_reg |= ZYNQ_QSPI_CONFIG_CPHA_MASK; + if (spi->mode & SPI_CPOL) + config_reg |= ZYNQ_QSPI_CONFIG_CPOL_MASK; + + config_reg &= ~ZYNQ_QSPI_CONFIG_BDRATE_MASK; + config_reg |= (baud_rate_val << ZYNQ_QSPI_BAUD_DIV_SHIFT); + zynq_qspi_write(xqspi, ZYNQ_QSPI_CONFIG_OFFSET, config_reg); + + return 0; +} + +/** + * zynq_qspi_setup - Configure the QSPI controller + * @spi: Pointer to the spi_device structure + * + * Sets the operational mode of QSPI controller for the next QSPI transfer, baud + * rate and divisor value to setup the requested qspi clock. + * + * Return: 0 on success and error value on failure + */ +static int zynq_qspi_setup_op(struct spi_device *spi) +{ + struct spi_controller *ctrl = spi->master; + struct zynq_qspi *qspi = spi_controller_get_devdata(ctrl); + + if (ctrl->busy) + return -EBUSY; + + clk_enable(qspi->refclk); + clk_enable(qspi->pclk); + zynq_qspi_write(qspi, ZYNQ_QSPI_ENABLE_OFFSET, + ZYNQ_QSPI_ENABLE_ENABLE_MASK); + + return 0; +} + +/** + * zynq_qspi_write_op - Fills the TX FIFO with as many bytes as possible + * @xqspi: Pointer to the zynq_qspi structure + * @txcount: Maximum number of words to write + * @txempty: Indicates that TxFIFO is empty + */ +static void zynq_qspi_write_op(struct zynq_qspi *xqspi, int txcount, + bool txempty) +{ + int count, len, k; + + len = xqspi->tx_bytes; + if (len && len < 4) { + /* + * We must empty the TxFIFO between accesses to TXD0, + * TXD1, TXD2, TXD3. + */ + if (txempty) + zynq_qspi_txfifo_op(xqspi, len); + + return; + } + + count = len / 4; + if (count > txcount) + count = txcount; + + if (xqspi->txbuf) { + iowrite32_rep(xqspi->regs + ZYNQ_QSPI_TXD_00_00_OFFSET, + xqspi->txbuf, count); + xqspi->txbuf += count * 4; + } else { + for (k = 0; k < count; k++) + writel_relaxed(0, xqspi->regs + + ZYNQ_QSPI_TXD_00_00_OFFSET); + } + + xqspi->tx_bytes -= count * 4; +} + +/** + * zynq_qspi_read_op - Drains the RX FIFO by as many bytes as possible + * @xqspi: Pointer to the zynq_qspi structure + * @rxcount: Maximum number of words to read + */ +static void zynq_qspi_read_op(struct zynq_qspi *xqspi, int rxcount) +{ + int count, len, k; + + len = xqspi->rx_bytes - xqspi->tx_bytes; + count = len / 4; + if (count > rxcount) + count = rxcount; + if (xqspi->rxbuf) { + ioread32_rep(xqspi->regs + ZYNQ_QSPI_RXD_OFFSET, + xqspi->rxbuf, count); + xqspi->rxbuf += count * 4; + } else { + for (k = 0; k < count; k++) + readl_relaxed(xqspi->regs + ZYNQ_QSPI_RXD_OFFSET); + } + xqspi->rx_bytes -= count * 4; + len -= count * 4; + + if (len && len < 4 && count < rxcount) + zynq_qspi_rxfifo_op(xqspi, len); +} + +/** + * zynq_qspi_irq - Interrupt service routine of the QSPI controller + * @irq: IRQ number + * @dev_id: Pointer to the xqspi structure + * + * This function handles TX empty only. + * On TX empty interrupt this function reads the received data from RX FIFO and + * fills the TX FIFO if there is any data remaining to be transferred. + * + * Return: IRQ_HANDLED when interrupt is handled; IRQ_NONE otherwise. + */ +static irqreturn_t zynq_qspi_irq(int irq, void *dev_id) +{ + u32 intr_status; + bool txempty; + struct zynq_qspi *xqspi = (struct zynq_qspi *)dev_id; + + intr_status = zynq_qspi_read(xqspi, ZYNQ_QSPI_STATUS_OFFSET); + zynq_qspi_write(xqspi, ZYNQ_QSPI_STATUS_OFFSET, intr_status); + + if ((intr_status & ZYNQ_QSPI_IXR_TXNFULL_MASK) || + (intr_status & ZYNQ_QSPI_IXR_RXNEMTY_MASK)) { + /* + * This bit is set when Tx FIFO has < THRESHOLD entries. + * We have the THRESHOLD value set to 1, + * so this bit indicates Tx FIFO is empty. + */ + txempty = !!(intr_status & ZYNQ_QSPI_IXR_TXNFULL_MASK); + /* Read out the data from the RX FIFO */ + zynq_qspi_read_op(xqspi, ZYNQ_QSPI_RX_THRESHOLD); + if (xqspi->tx_bytes) { + /* There is more data to send */ + zynq_qspi_write_op(xqspi, ZYNQ_QSPI_RX_THRESHOLD, + txempty); + } else { + /* + * If transfer and receive is completed then only send + * complete signal. + */ + if (!xqspi->rx_bytes) { + zynq_qspi_write(xqspi, + ZYNQ_QSPI_IDIS_OFFSET, + ZYNQ_QSPI_IXR_RXTX_MASK); + complete(&xqspi->data_completion); + } + } + return IRQ_HANDLED; + } + + return IRQ_NONE; +} + +/** + * zynq_qspi_exec_mem_op() - Initiates the QSPI transfer + * @mem: the SPI memory + * @op: the memory operation to execute + * + * Executes a memory operation. + * + * This function first selects the chip and starts the memory operation. + * + * Return: 0 in case of success, a negative error code otherwise. + */ +static int zynq_qspi_exec_mem_op(struct spi_mem *mem, + const struct spi_mem_op *op) +{ + struct zynq_qspi *xqspi = spi_controller_get_devdata(mem->spi->master); + int err = 0, i; + u8 *tmpbuf; + + dev_dbg(xqspi->dev, "cmd:%#x mode:%d.%d.%d.%d\n", + op->cmd.opcode, op->cmd.buswidth, op->addr.buswidth, + op->dummy.buswidth, op->data.buswidth); + + zynq_qspi_chipselect(mem->spi, true); + zynq_qspi_config_op(xqspi, mem->spi); + + if (op->cmd.opcode) { + reinit_completion(&xqspi->data_completion); + xqspi->txbuf = (u8 *)&op->cmd.opcode; + xqspi->rxbuf = NULL; + xqspi->tx_bytes = sizeof(op->cmd.opcode); + xqspi->rx_bytes = sizeof(op->cmd.opcode); + zynq_qspi_write_op(xqspi, ZYNQ_QSPI_FIFO_DEPTH, true); + zynq_qspi_write(xqspi, ZYNQ_QSPI_IEN_OFFSET, + ZYNQ_QSPI_IXR_RXTX_MASK); + if (!wait_for_completion_interruptible_timeout(&xqspi->data_completion, + msecs_to_jiffies(1000))) + err = -ETIMEDOUT; + } + + if (op->addr.nbytes) { + for (i = 0; i < op->addr.nbytes; i++) { + xqspi->txbuf[i] = op->addr.val >> + (8 * (op->addr.nbytes - i - 1)); + } + + reinit_completion(&xqspi->data_completion); + xqspi->rxbuf = NULL; + xqspi->tx_bytes = op->addr.nbytes; + xqspi->rx_bytes = op->addr.nbytes; + zynq_qspi_write_op(xqspi, ZYNQ_QSPI_FIFO_DEPTH, true); + zynq_qspi_write(xqspi, ZYNQ_QSPI_IEN_OFFSET, + ZYNQ_QSPI_IXR_RXTX_MASK); + if (!wait_for_completion_interruptible_timeout(&xqspi->data_completion, + msecs_to_jiffies(1000))) + err = -ETIMEDOUT; + } + + if (op->dummy.nbytes) { + tmpbuf = kzalloc(op->dummy.nbytes, GFP_KERNEL); + memset(tmpbuf, 0xff, op->dummy.nbytes); + reinit_completion(&xqspi->data_completion); + xqspi->txbuf = tmpbuf; + xqspi->rxbuf = NULL; + xqspi->tx_bytes = op->dummy.nbytes; + xqspi->rx_bytes = op->dummy.nbytes; + zynq_qspi_write_op(xqspi, ZYNQ_QSPI_FIFO_DEPTH, true); + zynq_qspi_write(xqspi, ZYNQ_QSPI_IEN_OFFSET, + ZYNQ_QSPI_IXR_RXTX_MASK); + if (!wait_for_completion_interruptible_timeout(&xqspi->data_completion, + msecs_to_jiffies(1000))) + err = -ETIMEDOUT; + + kfree(tmpbuf); + } + + if (op->data.nbytes) { + reinit_completion(&xqspi->data_completion); + if (op->data.dir == SPI_MEM_DATA_OUT) { + xqspi->txbuf = (u8 *)op->data.buf.out; + xqspi->tx_bytes = op->data.nbytes; + xqspi->rxbuf = NULL; + xqspi->rx_bytes = op->data.nbytes; + } else { + xqspi->txbuf = NULL; + xqspi->rxbuf = (u8 *)op->data.buf.in; + xqspi->rx_bytes = op->data.nbytes; + xqspi->tx_bytes = op->data.nbytes; + } + + zynq_qspi_write_op(xqspi, ZYNQ_QSPI_FIFO_DEPTH, true); + zynq_qspi_write(xqspi, ZYNQ_QSPI_IEN_OFFSET, + ZYNQ_QSPI_IXR_RXTX_MASK); + if (!wait_for_completion_interruptible_timeout(&xqspi->data_completion, + msecs_to_jiffies(1000))) + err = -ETIMEDOUT; + } + zynq_qspi_chipselect(mem->spi, false); + + return err; +} + +static const struct spi_controller_mem_ops zynq_qspi_mem_ops = { + .supports_op = zynq_qspi_supports_op, + .exec_op = zynq_qspi_exec_mem_op, +}; + +/** + * zynq_qspi_probe - Probe method for the QSPI driver + * @pdev: Pointer to the platform_device structure + * + * This function initializes the driver data structures and the hardware. + * + * Return: 0 on success and error value on failure + */ +static int zynq_qspi_probe(struct platform_device *pdev) +{ + int ret = 0; + struct spi_controller *ctlr; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct zynq_qspi *xqspi; + struct resource *res; + u32 num_cs; + + ctlr = spi_alloc_master(&pdev->dev, sizeof(*xqspi)); + if (!ctlr) + return -ENOMEM; + + xqspi = spi_controller_get_devdata(ctlr); + xqspi->dev = dev; + platform_set_drvdata(pdev, xqspi); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + xqspi->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(xqspi->regs)) { + ret = PTR_ERR(xqspi->regs); + goto remove_master; + } + + xqspi->pclk = devm_clk_get(&pdev->dev, "pclk"); + if (IS_ERR(xqspi->pclk)) { + dev_err(&pdev->dev, "pclk clock not found.\n"); + ret = PTR_ERR(xqspi->pclk); + goto remove_master; + } + + init_completion(&xqspi->data_completion); + + xqspi->refclk = devm_clk_get(&pdev->dev, "ref_clk"); + if (IS_ERR(xqspi->refclk)) { + dev_err(&pdev->dev, "ref_clk clock not found.\n"); + ret = PTR_ERR(xqspi->refclk); + goto remove_master; + } + + ret = clk_prepare_enable(xqspi->pclk); + if (ret) { + dev_err(&pdev->dev, "Unable to enable APB clock.\n"); + goto remove_master; + } + + ret = clk_prepare_enable(xqspi->refclk); + if (ret) { + dev_err(&pdev->dev, "Unable to enable device clock.\n"); + goto clk_dis_pclk; + } + + /* QSPI controller initializations */ + zynq_qspi_init_hw(xqspi); + + xqspi->irq = platform_get_irq(pdev, 0); + if (xqspi->irq <= 0) { + ret = -ENXIO; + dev_err(&pdev->dev, "irq resource not found\n"); + goto remove_master; + } + ret = devm_request_irq(&pdev->dev, xqspi->irq, zynq_qspi_irq, + 0, pdev->name, xqspi); + if (ret != 0) { + ret = -ENXIO; + dev_err(&pdev->dev, "request_irq failed\n"); + goto remove_master; + } + + ret = of_property_read_u32(np, "num-cs", + &num_cs); + if (ret < 0) + ctlr->num_chipselect = ZYNQ_QSPI_DEFAULT_NUM_CS; + else + ctlr->num_chipselect = num_cs; + + ctlr->mode_bits = SPI_RX_DUAL | SPI_RX_QUAD | + SPI_TX_DUAL | SPI_TX_QUAD; + ctlr->mem_ops = &zynq_qspi_mem_ops; + ctlr->setup = zynq_qspi_setup_op; + ctlr->max_speed_hz = clk_get_rate(xqspi->refclk) / 2; + ctlr->dev.of_node = np; + ret = spi_register_controller(ctlr); + if (ret) { + dev_err(&pdev->dev, "spi_register_master failed\n"); + goto clk_dis_all; + } + + return ret; + +clk_dis_all: + clk_disable_unprepare(xqspi->refclk); +clk_dis_pclk: + clk_disable_unprepare(xqspi->pclk); +remove_master: + spi_controller_put(ctlr); + + return ret; +} + +/** + * zynq_qspi_remove - Remove method for the QSPI driver + * @pdev: Pointer to the platform_device structure + * + * This function is called if a device is physically removed from the system or + * if the driver module is being unloaded. It frees all resources allocated to + * the device. + * + * Return: 0 on success and error value on failure + */ +static int zynq_qspi_remove(struct platform_device *pdev) +{ + struct zynq_qspi *xqspi = platform_get_drvdata(pdev); + + zynq_qspi_write(xqspi, ZYNQ_QSPI_ENABLE_OFFSET, 0); + + clk_disable_unprepare(xqspi->refclk); + clk_disable_unprepare(xqspi->pclk); + + return 0; +} + +static const struct of_device_id zynq_qspi_of_match[] = { + { .compatible = "xlnx,zynq-qspi-1.0", }, + { /* end of table */ } +}; + +MODULE_DEVICE_TABLE(of, zynq_qspi_of_match); + +/* + * zynq_qspi_driver - This structure defines the QSPI platform driver + */ +static struct platform_driver zynq_qspi_driver = { + .probe = zynq_qspi_probe, + .remove = zynq_qspi_remove, + .driver = { + .name = "zynq-qspi", + .of_match_table = zynq_qspi_of_match, + }, +}; + +module_platform_driver(zynq_qspi_driver); + +MODULE_AUTHOR("Xilinx, Inc."); +MODULE_DESCRIPTION("Xilinx Zynq QSPI driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 93986f879b09..5e75944ad5d1 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -36,6 +36,8 @@ #define CREATE_TRACE_POINTS #include <trace/events/spi.h> +EXPORT_TRACEPOINT_SYMBOL(spi_transfer_start); +EXPORT_TRACEPOINT_SYMBOL(spi_transfer_stop); #include "internals.h" @@ -1039,6 +1041,8 @@ static int spi_map_msg(struct spi_controller *ctlr, struct spi_message *msg) if (max_tx || max_rx) { list_for_each_entry(xfer, &msg->transfers, transfer_list) { + if (!xfer->len) + continue; if (!xfer->tx_buf) xfer->tx_buf = ctlr->dummy_tx; if (!xfer->rx_buf) @@ -1177,10 +1181,10 @@ out: if (msg->status && ctlr->handle_err) ctlr->handle_err(ctlr, msg); - spi_res_release(ctlr, msg); - spi_finalize_current_message(ctlr); + spi_res_release(ctlr, msg); + return ret; } @@ -2195,6 +2199,8 @@ static int spi_get_gpio_descs(struct spi_controller *ctlr) */ cs[i] = devm_gpiod_get_index_optional(dev, "cs", i, GPIOD_OUT_LOW); + if (IS_ERR(cs[i])) + return PTR_ERR(cs[i]); if (cs[i]) { /* @@ -2261,7 +2267,7 @@ int spi_register_controller(struct spi_controller *ctlr) { struct device *dev = ctlr->dev.parent; struct boardinfo *bi; - int status = -ENODEV; + int status; int id, first_dynamic; if (!dev) @@ -2275,24 +2281,6 @@ int spi_register_controller(struct spi_controller *ctlr) if (status) return status; - if (!spi_controller_is_slave(ctlr)) { - if (ctlr->use_gpio_descriptors) { - status = spi_get_gpio_descs(ctlr); - if (status) - return status; - /* - * A controller using GPIO descriptors always - * supports SPI_CS_HIGH if need be. - */ - ctlr->mode_bits |= SPI_CS_HIGH; - } else { - /* Legacy code path for GPIOs from DT */ - status = of_spi_register_master(ctlr); - if (status) - return status; - } - } - /* even if it's just one always-selected device, there must * be at least one chipselect */ @@ -2349,6 +2337,25 @@ int spi_register_controller(struct spi_controller *ctlr) * registration fails if the bus ID is in use. */ dev_set_name(&ctlr->dev, "spi%u", ctlr->bus_num); + + if (!spi_controller_is_slave(ctlr)) { + if (ctlr->use_gpio_descriptors) { + status = spi_get_gpio_descs(ctlr); + if (status) + return status; + /* + * A controller using GPIO descriptors always + * supports SPI_CS_HIGH if need be. + */ + ctlr->mode_bits |= SPI_CS_HIGH; + } else { + /* Legacy code path for GPIOs from DT */ + status = of_spi_register_master(ctlr); + if (status) + return status; + } + } + status = device_add(&ctlr->dev); if (status < 0) { /* free bus id */ @@ -2781,11 +2788,6 @@ static int __spi_split_transfer_maxsize(struct spi_controller *ctlr, size_t offset; size_t count, i; - /* warn once about this fact that we are splitting a transfer */ - dev_warn_once(&msg->spi->dev, - "spi_transfer of length %i exceed max length of %zu - needed to split transfers\n", - xfer->len, maxsize); - /* calculate how many we have to replace */ count = DIV_ROUND_UP(xfer->len, maxsize); @@ -2943,6 +2945,11 @@ int spi_setup(struct spi_device *spi) * so it is ignored here. */ bad_bits = spi->mode & ~(spi->controller->mode_bits | SPI_CS_WORD); + /* nothing prevents from working with active-high CS in case if it + * is driven by GPIO. + */ + if (gpio_is_valid(spi->cs_gpio)) + bad_bits &= ~SPI_CS_HIGH; ugly_bits = bad_bits & (SPI_TX_DUAL | SPI_TX_QUAD | SPI_TX_OCTAL | SPI_RX_DUAL | SPI_RX_QUAD | SPI_RX_OCTAL); @@ -2988,6 +2995,21 @@ int spi_setup(struct spi_device *spi) } EXPORT_SYMBOL_GPL(spi_setup); +/** + * spi_set_cs_timing - configure CS setup, hold, and inactive delays + * @spi: the device that requires specific CS timing configuration + * @setup: CS setup time in terms of clock count + * @hold: CS hold time in terms of clock count + * @inactive_dly: CS inactive delay between transfers in terms of clock count + */ +void spi_set_cs_timing(struct spi_device *spi, u8 setup, u8 hold, + u8 inactive_dly) +{ + if (spi->controller->set_cs_timing) + spi->controller->set_cs_timing(spi, setup, hold, inactive_dly); +} +EXPORT_SYMBOL_GPL(spi_set_cs_timing); + static int __spi_validate(struct spi_device *spi, struct spi_message *message) { struct spi_controller *ctlr = spi->controller; @@ -3062,8 +3084,6 @@ static int __spi_validate(struct spi_device *spi, struct spi_message *message) if (!xfer->speed_hz) xfer->speed_hz = spi->max_speed_hz; - if (!xfer->speed_hz) - xfer->speed_hz = ctlr->max_speed_hz; if (ctlr->max_speed_hz && xfer->speed_hz > ctlr->max_speed_hz) xfer->speed_hz = ctlr->max_speed_hz; diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index b0c76e2626ce..70966e10be7e 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -276,17 +276,19 @@ static int spidev_message(struct spidev_data *spidev, k_tmp->bits_per_word = u_tmp->bits_per_word; k_tmp->delay_usecs = u_tmp->delay_usecs; k_tmp->speed_hz = u_tmp->speed_hz; + k_tmp->word_delay_usecs = u_tmp->word_delay_usecs; if (!k_tmp->speed_hz) k_tmp->speed_hz = spidev->speed_hz; #ifdef VERBOSE dev_dbg(&spidev->spi->dev, - " xfer len %u %s%s%s%dbits %u usec %uHz\n", + " xfer len %u %s%s%s%dbits %u usec %u usec %uHz\n", u_tmp->len, u_tmp->rx_buf ? "rx " : "", u_tmp->tx_buf ? "tx " : "", u_tmp->cs_change ? "cs " : "", u_tmp->bits_per_word ? : spidev->spi->bits_per_word, u_tmp->delay_usecs, + u_tmp->word_delay_usecs, u_tmp->speed_hz ? : spidev->spi->max_speed_hz); #endif spi_message_add_tail(k_tmp, &msg); diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index 62951e836cbc..c7d7dc89deba 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -106,8 +106,6 @@ source "drivers/staging/mt7621-pci-phy/Kconfig" source "drivers/staging/mt7621-pinctrl/Kconfig" -source "drivers/staging/mt7621-spi/Kconfig" - source "drivers/staging/mt7621-dma/Kconfig" source "drivers/staging/ralink-gdma/Kconfig" diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index d1b17ddcd354..19c0a25ff98b 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -43,7 +43,6 @@ obj-$(CONFIG_PI433) += pi433/ obj-$(CONFIG_PCI_MT7621) += mt7621-pci/ obj-$(CONFIG_PCI_MT7621_PHY) += mt7621-pci-phy/ obj-$(CONFIG_PINCTRL_RT2880) += mt7621-pinctrl/ -obj-$(CONFIG_SPI_MT7621) += mt7621-spi/ obj-$(CONFIG_SOC_MT7621) += mt7621-dma/ obj-$(CONFIG_DMA_RALINK) += ralink-gdma/ obj-$(CONFIG_MTK_MMC) += mt7621-mmc/ diff --git a/drivers/staging/mt7621-spi/Kconfig b/drivers/staging/mt7621-spi/Kconfig deleted file mode 100644 index 0b90f4cfa426..000000000000 --- a/drivers/staging/mt7621-spi/Kconfig +++ /dev/null @@ -1,6 +0,0 @@ -config SPI_MT7621 - tristate "MediaTek MT7621 SPI Controller" - depends on RALINK - help - This selects a driver for the MediaTek MT7621 SPI Controller. - diff --git a/drivers/staging/mt7621-spi/Makefile b/drivers/staging/mt7621-spi/Makefile deleted file mode 100644 index 3be508f63bac..000000000000 --- a/drivers/staging/mt7621-spi/Makefile +++ /dev/null @@ -1 +0,0 @@ -obj-$(CONFIG_SPI_MT7621) += spi-mt7621.o diff --git a/drivers/staging/mt7621-spi/TODO b/drivers/staging/mt7621-spi/TODO deleted file mode 100644 index fdbc5002c32a..000000000000 --- a/drivers/staging/mt7621-spi/TODO +++ /dev/null @@ -1,5 +0,0 @@ - -- general code review and clean up -- ensure device-tree requirements are documented - -Cc: NeilBrown <neil@brown.name> diff --git a/include/linux/platform_data/spi-ep93xx.h b/include/linux/platform_data/spi-ep93xx.h index eb16c6739ac2..b439f2a896e0 100644 --- a/include/linux/platform_data/spi-ep93xx.h +++ b/include/linux/platform_data/spi-ep93xx.h @@ -6,13 +6,9 @@ struct spi_device; /** * struct ep93xx_spi_info - EP93xx specific SPI descriptor - * @chipselect: array of gpio numbers to use as chip selects - * @num_chipselect: ARRAY_SIZE(chipselect) * @use_dma: use DMA for the transfers */ struct ep93xx_spi_info { - int *chipselect; - int num_chipselect; bool use_dma; }; diff --git a/include/linux/spi/pxa2xx_spi.h b/include/linux/spi/pxa2xx_spi.h index c1c59473cef9..6005f0126631 100644 --- a/include/linux/spi/pxa2xx_spi.h +++ b/include/linux/spi/pxa2xx_spi.h @@ -25,6 +25,7 @@ struct dma_chan; struct pxa2xx_spi_controller { u16 num_chipselect; u8 enable_dma; + u8 dma_burst_size; bool is_slave; /* DMA engine specific config */ diff --git a/include/linux/spi/spi-mem.h b/include/linux/spi/spi-mem.h index 3703d0dcac2e..af9ff2f0f1b2 100644 --- a/include/linux/spi/spi-mem.h +++ b/include/linux/spi/spi-mem.h @@ -295,6 +295,10 @@ int spi_controller_dma_map_mem_op_data(struct spi_controller *ctlr, void spi_controller_dma_unmap_mem_op_data(struct spi_controller *ctlr, const struct spi_mem_op *op, struct sg_table *sg); + +bool spi_mem_default_supports_op(struct spi_mem *mem, + const struct spi_mem_op *op); + #else static inline int spi_controller_dma_map_mem_op_data(struct spi_controller *ctlr, @@ -310,6 +314,14 @@ spi_controller_dma_unmap_mem_op_data(struct spi_controller *ctlr, struct sg_table *sg) { } + +static inline +bool spi_mem_default_supports_op(struct spi_mem *mem, + const struct spi_mem_op *op) +{ + return false; +} + #endif /* CONFIG_SPI_MEM */ int spi_mem_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op); diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 662b336aa2e4..053abd22ad31 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -143,7 +143,7 @@ struct spi_device { u32 max_speed_hz; u8 chip_select; u8 bits_per_word; - u16 mode; + u32 mode; #define SPI_CPHA 0x01 /* clock phase */ #define SPI_CPOL 0x02 /* clock polarity */ #define SPI_MODE_0 (0|0) /* (original MicroWire) */ @@ -330,6 +330,9 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * must fail if an unrecognized or unsupported mode is requested. * It's always safe to call this unless transfers are pending on * the device whose settings are being modified. + * @set_cs_timing: optional hook for SPI devices to request SPI master + * controller for configuring specific CS setup time, hold time and inactive + * delay interms of clock counts * @transfer: adds a message to the controller's transfer queue. * @cleanup: frees controller-specific state * @can_dma: determine whether this controller supports DMA @@ -363,6 +366,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * @unprepare_transfer_hardware: there are currently no more messages on the * queue so the subsystem notifies the driver that it may relax the * hardware by issuing this call + * * @set_cs: set the logic level of the chip select line. May be called * from interrupt context. * @prepare_message: set up the controller to transfer a single message, @@ -439,13 +443,12 @@ struct spi_controller { u16 dma_alignment; /* spi_device.mode flags understood by this controller driver */ - u16 mode_bits; + u32 mode_bits; /* bitmask of supported bits_per_word for transfers */ u32 bits_per_word_mask; #define SPI_BPW_MASK(bits) BIT((bits) - 1) -#define SPI_BIT_MASK(bits) (((bits) == 32) ? ~0U : (BIT(bits) - 1)) -#define SPI_BPW_RANGE_MASK(min, max) (SPI_BIT_MASK(max) - SPI_BIT_MASK(min - 1)) +#define SPI_BPW_RANGE_MASK(min, max) GENMASK((max) - 1, (min) - 1) /* limits on transfer speed */ u32 min_speed_hz; @@ -489,6 +492,17 @@ struct spi_controller { */ int (*setup)(struct spi_device *spi); + /* + * set_cs_timing() method is for SPI controllers that supports + * configuring CS timing. + * + * This hook allows SPI client drivers to request SPI controllers + * to configure specific CS timing through spi_set_cs_timing() after + * spi_setup(). + */ + void (*set_cs_timing)(struct spi_device *spi, u8 setup_clk_cycles, + u8 hold_clk_cycles, u8 inactive_clk_cycles); + /* bidirectional bulk transfers * * + The transfer() method may not sleep; its main role is @@ -1277,7 +1291,7 @@ struct spi_board_info { /* mode becomes spi_device.mode, and is essential for chips * where the default of SPI_CS_HIGH = 0 is wrong. */ - u16 mode; + u32 mode; /* ... may need additional spi_device chip config data here. * avoid stuff protocol drivers can set; but include stuff diff --git a/include/linux/spi/spi_bitbang.h b/include/linux/spi/spi_bitbang.h index b7e021b274dc..4444c2a992cb 100644 --- a/include/linux/spi/spi_bitbang.h +++ b/include/linux/spi/spi_bitbang.h @@ -44,6 +44,7 @@ extern int spi_bitbang_setup_transfer(struct spi_device *spi, /* start or stop queue processing */ extern int spi_bitbang_start(struct spi_bitbang *spi); +extern int spi_bitbang_init(struct spi_bitbang *spi); extern void spi_bitbang_stop(struct spi_bitbang *spi); #endif /* __SPI_BITBANG_H */ diff --git a/include/trace/events/spi.h b/include/trace/events/spi.h index aef6869f563d..0dd9171d2ad8 100644 --- a/include/trace/events/spi.h +++ b/include/trace/events/spi.h @@ -131,9 +131,11 @@ DECLARE_EVENT_CLASS(spi_transfer, __field( struct spi_transfer *, xfer ) __field( int, len ) __dynamic_array(u8, rx_buf, - spi_valid_rxbuf(msg, xfer) ? xfer->len : 0) + spi_valid_rxbuf(msg, xfer) ? + (xfer->len < 64 ? xfer->len : 64) : 0) __dynamic_array(u8, tx_buf, - spi_valid_txbuf(msg, xfer) ? xfer->len : 0) + spi_valid_txbuf(msg, xfer) ? + (xfer->len < 64 ? xfer->len : 64) : 0) ), TP_fast_assign( @@ -144,11 +146,11 @@ DECLARE_EVENT_CLASS(spi_transfer, if (spi_valid_txbuf(msg, xfer)) memcpy(__get_dynamic_array(tx_buf), - xfer->tx_buf, xfer->len); + xfer->tx_buf, __get_dynamic_array_len(tx_buf)); if (spi_valid_rxbuf(msg, xfer)) memcpy(__get_dynamic_array(rx_buf), - xfer->rx_buf, xfer->len); + xfer->rx_buf, __get_dynamic_array_len(rx_buf)); ), TP_printk("spi%d.%d %p len=%d tx=[%*phD] rx=[%*phD]", diff --git a/include/uapi/linux/spi/spidev.h b/include/uapi/linux/spi/spidev.h index c4253f0090d8..ee0f2460bff6 100644 --- a/include/uapi/linux/spi/spidev.h +++ b/include/uapi/linux/spi/spidev.h @@ -66,6 +66,9 @@ * @delay_usecs: If nonzero, how long to delay after the last bit transfer * before optionally deselecting the device before the next transfer. * @cs_change: True to deselect device before starting the next transfer. + * @word_delay_usecs: If nonzero, how long to wait between words within one + * transfer. This property needs explicit support in the SPI controller, + * otherwise it is silently ignored. * * This structure is mapped directly to the kernel spi_transfer structure; * the fields have the same meanings, except of course that the pointers @@ -100,7 +103,8 @@ struct spi_ioc_transfer { __u8 cs_change; __u8 tx_nbits; __u8 rx_nbits; - __u16 pad; + __u8 word_delay_usecs; + __u8 pad; /* If the contents of 'struct spi_ioc_transfer' ever change * incompatibly, then the ioctl number (currently 0) must change; diff --git a/sound/soc/codecs/adau1977-spi.c b/sound/soc/codecs/adau1977-spi.c index 84ffbde9583f..2baf61567b59 100644 --- a/sound/soc/codecs/adau1977-spi.c +++ b/sound/soc/codecs/adau1977-spi.c @@ -10,6 +10,8 @@ #include <linux/mod_devicetable.h> #include <linux/module.h> #include <linux/regmap.h> +#include <linux/of.h> +#include <linux/of_device.h> #include <linux/spi/spi.h> #include <sound/soc.h> @@ -54,9 +56,18 @@ static const struct spi_device_id adau1977_spi_ids[] = { }; MODULE_DEVICE_TABLE(spi, adau1977_spi_ids); +static const struct of_device_id adau1977_spi_of_match[] = { + { .compatible = "adi,adau1977" }, + { .compatible = "adi,adau1978" }, + { .compatible = "adi,adau1979" }, + { }, +}; +MODULE_DEVICE_TABLE(of, adau1977_spi_of_match); + static struct spi_driver adau1977_spi_driver = { .driver = { .name = "adau1977", + .of_match_table = of_match_ptr(adau1977_spi_of_match), }, .probe = adau1977_spi_probe, .id_table = adau1977_spi_ids, |