summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c
AgeCommit message (Collapse)AuthorFilesLines
2024-04-25net: atlantic: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACYDamien Le Moal1-1/+1
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro. To be consistent with this change, rename AQ_HW_IRQ_LEGACY and AQ_CFG_FORCE_LEGACY_INT to AQ_HW_IRQ_INTX and AQ_CFG_FORCE_INTX. Link: https://lore.kernel.org/r/20240325070944.3600338-16-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-04-20net: atlantic: Implement xdp control planeTaehee Yoo1-3/+3
aq_xdp() is a xdp setup callback function for Atlantic driver. When XDP is attached or detached, the device will be restarted because it uses different headroom, tailroom, and page order value. If XDP enabled, it switches default page order value from 0 to 2. Because the default maximum frame size is still 2K and it needs additional area for headroom and tailroom. The total size(headroom + frame size + tailroom) is 2624. So, 1472Bytes will be always wasted for every frame. But when order-2 is used, these pages can be used 6 times with flip strategy. It means only about 106Bytes per frame will be wasted. Also, It supports xdp fragment feature. MTU can be 16K if xdp prog supports xdp fragment. If not, MTU can not exceed 2K - ETH_HLEN - ETH_FCS. And a static key is added and It will be used to call the xdp_clean handler in ->poll(). data plane implementation will be contained the followed patch. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-14ethernet: constify references to netdev->dev_addr in driversJakub Kicinski1-2/+2
This big patch sprinkles const on local variables and function arguments which may refer to netdev->dev_addr. Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Some of the changes here are not strictly required - const is sometimes cast off but pointer is not used for writing. It seems like it's still better to add the const in case the code changes later or relevant -W flags get enabled for the build. No functional changes. Link: https://lore.kernel.org/r/20211014142432.449314-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-08-03net: ethernet: aquantia: Fix wrong return valueTianjia Zhang1-1/+1
In function hw_atl_a0_hw_multicast_list_set(), when an invalid request is encountered, a negative error code should be returned. Fixes: bab6de8fd180b ("net: ethernet: aquantia: Atlantic A0 and B0 specific functions") Cc: David VomLehn <vomlehn@texas.net> Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: atlantic: A0 ntuple filtersDmitry Bogdanov1-28/+88
This patch adds support for ntuple filters on A0. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: atlantic: use intermediate variable to improve readability a bitNikita Danilov1-11/+10
This patch syncs up hw_atl_a0.c with an out-of-tree driver, where an intermediate variable was introduced in a couple of functions to improve the code readability a bit. Signed-off-by: Nikita Danilov <ndanilov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: atlantic: add support for 64-bit reads/writesPavel Belous1-0/+1
This patch adds support for 64-bit reads/writes where applicable, e.g. A2 supports them. Signed-off-by: Pavel Belous <pbelous@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-22net: atlantic: change the order of arguments for TC weight/credit settersMark Starovoytov1-4/+4
This patch changes the order of arguments for TC weight/credit setter functions. Having the "value to be set" on the right is slightly more robust in a sense that it's more natural for the humans, so it's a bit more error-proof this way. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-22net: atlantic: changes for multi-TC supportDmitry Bezrukov1-1/+1
This patch contains the following changes: * access cfg via aq_nic_get_cfg() in aq_nic_start() and aq_nic_map_skb(); * call aq_nic_get_dev() just once in aq_nic_map_skb(); * move ring allocation/deallocation out of aq_vec_alloc()/aq_vec_free(); * add the missing aq_nic_deinit() in atl_resume_common(); * rename 'tcs' field to 'tcs_max' in aq_hw_caps_s to differentiate it from the 'tcs' field in aq_nic_cfg_s, which is used for the current number of TCs; * update _TC_MAX defines to the actual number of supported TCs; * move tx_tc_mode register defines slightly higher (just to keep the order of definitions); * separate variables for TX/RX buff_size in hw_atl*_hw_qos_set(); * use AQ_HW_*_TC instead of hardcoded magic numbers; * actually use the 'ret' value in aq_mdo_add_secy(); Signed-off-by: Dmitry Bezrukov <dbezrukov@marvell.com> Co-developed-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-09net: atlantic: remove TPO2 check from A0 codeMark Starovoytov1-2/+1
TPO2 was introduced in B0 only, no reason to check for it in A0 code. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-09net: atlantic: rename AQ_NIC_RATE_2GS to AQ_NIC_RATE_2G5Mark Starovoytov1-7/+8
This patch changes the constant name to a more logical "2G5" (for 2.5G speeds). Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-01net: atlantic: move IS_CHIP_FEATURE to aq_hw.hMark Starovoytov1-1/+1
IS_CHIP feature will be used to differentiate between A1 and A2, where necessary. Thus, move it to aq_hw.h, rename it and make it accept the 'hw' pointer. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01net: atlantic: add hw_soft_reset, hw_prepare to hw_opsMark Starovoytov1-0/+2
A2 will have a different implementation of these 2 APIs, so this patch moves them to hw_ops in preparation for A2. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Co-developed-by: Dmitry Bezrukov <dbezrukov@marvell.com> Signed-off-by: Dmitry Bezrukov <dbezrukov@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-07net: atlantic: implement UDP GSO offloadIgor Russkikh1-1/+1
atlantic hardware does support UDP hardware segmentation offload. This allows user to specify one large contiguous buffer with data which then will be split automagically into multiple UDP packets of specified size. Bulk sending of large UDP streams lowers CPU usage and increases bandwidth. We did estimations both with udpgso_bench_tx test tool and with modified iperf3 measurement tool (4 streams, multithread, 200b packet size) over AQC<->AQC 10G link. Flow control is disabled to prevent RX side impact on measurements. No UDP GSO: iperf3 -c 10.0.1.2 -u -b0 -l 200 -P4 --multithread UDP GSO: iperf3 -c 10.0.1.2 -u -b0 -l 12600 --udp-lso 200 -P4 --multithread Mode CPU iperf speed Line speed Packets per second ------------------------------------------------------------- NO UDP GSO 350% 3.07 Gbps 3.8 Gbps 1,919,419 SW UDP GSO 200% 5.55 Gbps 6.4 Gbps 3,286,144 HW UDP GSO 90% 6.80 Gbps 8.4 Gbps 4,273,117 Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-07net: atlantic: update flow control logicNikita Danilov1-1/+1
We now differentiate requested and negotiated flow control modes. Therefore `ethtool -A` now operates on local requested FC values, and regular link settings shows the negotiated FC settings. Signed-off-by: Nikita Danilov <ndanilov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-07net: atlantic: code style cleanupNikita Danilov1-15/+24
Thats a pure checkpatck walkthrough the code with no functional changes. Reverse christmas tree, spacing, etc. Signed-off-by: Nikita Danilov <ndanilov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: aquantia: adding fields and device features for vlan offloadIgor Russkikh1-1/+1
Updating features and vlan_features with vlan HW offload. Added vlan_tag fields to rx/tx ring_buff to track vlan related data. Tested-by: Nikita Danilov <ndanilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 422Thomas Gleixner1-4/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 101 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190113.822954939@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-01net: aquantia: use macros for better visibilityIgor Russkikh1-4/+4
Improve for better readability Signed-off-by: Nikita Danilov <ndanilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23net: aquantia: optimize rx performance by page reuse strategyIgor Russkikh1-4/+0
We introduce internal aq_rxpage wrapper over regular page where extra field is tracked: rxpage offset inside of allocated page. This offset allows to reuse one page for multiple packets. When needed (for example with large frames processing), allocated pageorder could be customized. This gives even larger page reuse efficiency. page_ref_count is used to track page users. If during rx refill underlying page has users, we increase pg_off by rx frame size thus the top half of the page is reused. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01net: aquantia: replace AQ_HW_WAIT_FOR with readx_poll_timeout_atomicNikita Danilov1-6/+15
David noticed the original define was hiding 'err' variable reference. Thats confusing and counterintuitive. Andrew noted the whole macro could be replaced with standard readx_poll kernel macro. This makes code more readable. Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01net: aquantia: fixed instack structure overflowIgor Russkikh1-2/+2
This is a real stack undercorruption found by kasan build. The issue did no harm normally because it only overflowed 2 bytes after `bitary` array which on most architectures were mapped into `err` local. Fixes: bab6de8fd180 ("net: ethernet: aquantia: Atlantic A0 and B0 specific functions.") Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-11net: aquantia: renaming for better visibilityNikita Danilov1-16/+16
Removed extra characters from the names of structures to unify prefixes used through the driver code (we normally use hw_atl for hw specifics). HW_ATL_B0_ and HW_ATL_A0_ are the same and useless copies. Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-11net: aquantia: whitespace changesNikita Danilov1-9/+9
Removed extra spaces, corrected alignment. Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-11net: aquantia: implement WOL supportYana Esina1-1/+0
Add WOL support. Currently only magic packet (ethtool -s <ethX> wol g) feature is implemented. Remove hw_set_power and move that to FW_OPS set_power: because WOL configuration behaves differently on 1x and 2x firmwares Signed-off-by: Yana Esina <yana.esina@aquantia.com> Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com> Tested-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-20Merge ra.kernel.org:/pub/scm/linux/kernel/git/torvalds/linuxDavid S. Miller1-1/+1
All conflicts were trivial overlapping changes, so reasonably easy to resolve. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-06net: aquantia: vlan unicast address list correct handlingIgor Russkikh1-1/+1
Setting up macvlan/macvtap networks over atlantic NIC results in no traffic over these networks because ndo_set_rx_mode did not listed UC MACs as registered in unicast filter. Here we fix that taking into account maximum number of UC filters supported by hardware. If more than MAX addresses were registered, we just enable promisc and/or allmulti to pass the traffic in. We also remove MULTICAST_ADDRESS_MAX constant from aq_cfg since thats not a configurable parameter at all. Fixes: b21f502 ("net:ethernet:aquantia: Fix for multicast filter handling.") Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-03net: aquantia: Improve adapter init/deinit logicIgor Russkikh1-1/+0
We now pass link drop status to FW on init/deinit. This is required to inform FW that driver took/released a control on link. FW then will manage its own state and device power profile based on this information. To improve management we remove mpi_set function which ambiguously took both state and speed parameters. Deinit callback is now a part of FW ops, as it actually manages the FW. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-03net: aquantia: Ethtool based ring size configurationAnton Mikaev1-22/+24
Implemented ring size setup, min/max validation and reconfiguration in runtime. Signed-off-by: Anton Mikaev <amikaev@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-21net: aquantia: Introduce firmware ops callbacksIgor Russkikh1-19/+4
New AQC cards will have an updated firmware with new binary interface. This patch extracts firmware specific operations into a separate table and prepares for the introduction of new fw 2.x and 3.x Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-21net: aquantia: Change confusing no_ff_addr to more meaningful nameIgor Russkikh1-1/+2
The address to check if HW is not dead/hang could be stored in capabilities, since it is a constant. Change its name to better reflect the idea. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-21net: aquantia: Remove create/destroy from hw opsIgor Russkikh1-25/+0
These ops are not related to HW and are now implemented in pci module. Thus, remove these ops pointers and implementation. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-21net: aquantia: Introduce new AQC devices and capabilitiesIgor Russkikh1-31/+59
A number of new AQC devices is going to be released. To support more flexible capabilities management a number of static caps instances is now declared. Devices now are mainly differs by supported speeds, but in future more parameters will be customized. A set of AQC100 devices have fibre media, not twisted pair - this is also reflected in new capabilities definitions. HW level also now directly exports hw_ops for each of A0/B0 hardware. PCI configuration now uses a device configuration table where each device ID is explicitly mapped with hardware OPs and capabilities structures. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-21net: aquantia: Introduce new device ids and constantsIgor Russkikh1-10/+10
New set of aquantia devices has an upgraded hardware (B1). The hardware interface is identical to B0. The difference will be in firmware which is incompatible with old one. Reorganized and removed duplicate speed and devid definitions Introduced explicit flow control configuration defines Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16net: aquantia: Prepend hw access functions declarations with prefixIgor Russkikh1-152/+161
Internal functions for registers and HW access were not prefixed. This introduce noise in global kernel symbols. Here we add explicit prefix 'hw_atl' to all the HW access layer functions. Alignment and styling were fixed as well. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16net: aquantia: Eliminate aq_nic structure abstractionIgor Russkikh1-0/+1
aq_nic_s was hidden in aq_nic_internal.h, that made it difficult to access nic fields and structures from other modules. This change moves aq_nic_s struct into aq_nic.h and thus makes it available to other driver modules, mainly pci module and hw related module. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16net: aquantia: Add const qualifiers for hardware ops tablesIgor Russkikh1-2/+2
Hardware operations and capabilities tables are constants and never changed. Declare these as constants. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16net: aquantia: Cleanup hardware access modulesIgor Russkikh1-18/+9
Use direct aq_hw_s *self reference where possible Eliminate useless abstraction PHAL, duplicated structures definitions, Simplify nic config structure creation and management. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16net: aquantia: Cleanup status flags accessesIgor Russkikh1-1/+1
Usage of aq_obj_s structure is noop, here we remove it replacing access to flags filed directly. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16net: aquantia: Eliminate AQ_DIMOF, replace with ARRAY_SIZEIgor Russkikh1-1/+1
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15net: aquantia: Update hw counters on hw initIgor Russkikh1-0/+4
On very first start we should read out current HW counter values to make diff based calculations later. This also should be done each time NIC gets down/up or wakes up after sleep state. We reset link state explicitly to prevent diffs from being summed this first time. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15net: aquantia: Fix actual speed capabilities reportingIgor Russkikh1-1/+12
Different hardware device Ids correspond to different maximum speed available. Extra checks were added for devices D108 and D109 to remove unsupported speeds from these device capabilities list. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21net: aquantia: Enable coalescing management via ethtool interfaceIgor Russkikh1-11/+9
Aquantia NIC allows both TX and RX interrupt throttle rate (ITR) management, but this was used in a very limited way via predefined values. This patch allows to setup ITR default values via module command line arguments and via standard ethtool coalescing settings. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21net: aquantia: Reset nic statistics on interface up/downIgor Russkikh1-0/+1
Internal statistics system on chip never gets reset until hardware reboot. This is quite inconvenient in terms of ethtool statistics usage. This patch implements incremental statistics update inside of service callback. Upon nic initialization, first request is done to fetch initial stat data, current collected stat data gets cleared. Internal statistics mailbox readout is improved to save space and increase readability Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-29net:ethernet:aquantia: Workaround for HW checksum bug.Pavel Belous1-0/+6
The hardware has the HW Checksum Offload bug when small TCP patckets (with length <= 60 bytes) has wrong "checksum valid" bit. The solution is - ignore checksum valid bit for small packets (with length <= 60 bytes) and mark this as CHECKSUM_NONE to allow network stack recalculate checksum itself. Fixes: ccf9a5ed14be ("net: ethernet: aquantia: Atlantic A0 and B0 specific functions.") Signed-off-by: Pavel Belous <Pavel.Belous@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-11ethernet: aquantia: remove redundant checks on error statusColin Ian King1-12/+1
The error status err is initialized as zero and then being checked several times to see if it is less than zero even when it has not been updated. It may seem that the err should be assigned to the return code of the call to the various *offload_en_set calls and then we check for failure, however, these functions are void and never actually return any status. Since these error checks are redundant we can remove these as well as err and the error exit label err_exit. Detected by CoverityScan, CID#1398313 and CID#1398306 ("Logically dead code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Acked-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24net:ethernet:aquantia: Reset is_gso flag when EOP reached.Pavel Belous1-0/+1
We need to reset is_gso flag when EOP reached (entire LSO packet processed). Fixes: bab6de8fd180 ("net: ethernet: aquantia: Atlantic A0 and B0 specific functions.") Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24net:ethernet:aquantia: Fix for LSO with IPv6.Pavel Belous1-0/+3
Fix Context Command bit: L3 type = "0" for IPv4, "1" for IPv6. Fixes: bab6de8fd180 ("net: ethernet: aquantia: Atlantic A0 and B0 specific functions.") Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: ethernet: aquantia: Fixed incorrect buff->len calculation.Pavel Belous1-2/+2
rxd_wb->pkt_len is the total length of the packet. If we received a large packet (with length > AQ_CFG_RX_FRAME_MAX) then we will get multiple buffers. We need to fix the length of the last buffer. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-24net: ethernet: aquantia: Atlantic A0 and B0 specific functions.David VomLehn1-0/+905
Add Atlantic A0 and B0 specific functions. Signed-off-by: Alexander Loktionov <Alexander.Loktionov@aquantia.com> Signed-off-by: Dmitrii Tarakanov <Dmitrii.Tarakanov@aquantia.com> Signed-off-by: Pavel Belous <Pavel.Belous@aquantia.com> Signed-off-by: Dmitry Bezrukov <Dmitry.Bezrukov@aquantia.com> Signed-off-by: David M. VomLehn <vomlehn@texas.net> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 04:19:45 +0000