summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/r8a7791.dtsi
AgeCommit message (Collapse)AuthorFilesLines
2016-08-17ARM: dts: r8a7791: Remove obsolete vsp1 propertiesGeert Uytterhoeven1-18/+0
As of commit 5aa2eb3c86d4fd16 ("[media] v4l: vsp1: Configure device based on IP version"), the DT properties to identify the exact VSP device instance features are no longer used. Hence remove them. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-29ARM: dts: r8a7791: Add APMU nodeMagnus Damm1-0/+7
Add a DT node for the Advanced Power Management Units (APMU), and use the enable-method to point out that the APMU should be used for SMP support. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-05-30ARM: dts: r8a7791: Fix W=1 dtc warningsGeert Uytterhoeven1-39/+40
Warning (unit_address_vs_reg): Node /cache-controller@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,dvc/dvc@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,dvc/dvc@1 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,mix/mix@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,mix/mix@1 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ctu/ctu@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ctu/ctu@1 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ctu/ctu@2 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ctu/ctu@3 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ctu/ctu@4 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ctu/ctu@5 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ctu/ctu@6 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ctu/ctu@7 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@1 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@2 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@3 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@4 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@5 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@6 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@7 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@8 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@9 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@1 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@2 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@3 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@4 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@5 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@6 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@7 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@8 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@9 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /cache-controller@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,dvc/dvc@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,dvc/dvc@1 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,mix/mix@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,mix/mix@1 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ctu/ctu@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ctu/ctu@1 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ctu/ctu@2 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ctu/ctu@3 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ctu/ctu@4 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ctu/ctu@5 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ctu/ctu@6 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ctu/ctu@7 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@1 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@2 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@3 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@4 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@5 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@6 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@7 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@8 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@9 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@1 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@2 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@3 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@4 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@5 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@6 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@7 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@8 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@9 has a unit name, but no reg property Move the cache-controller node under the cpus node, and make its unit name and reg property match the MPIDR values. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-05-30ARM: dts: r8a7791: Reference both DMA controllersNiklas Söderlund1-58/+87
R-Car Gen2 have two DMA controllers, which are equivalent. Add references to both dmac0 and dmac1 so the driver can choose which one to use. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-05-24Merge tag 'armsoc-late' of ↵Linus Torvalds1-73/+83
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late DT updates from Arnd Bergmann: "This is a collection of a few late fixes and other misc stuff that had dependencies on things being merged from other trees. The Renesas R-Car power domain handling, and the Nvidia Tegra USB support both hand notable changes that required changing the DT binding in a way that only provides compatibility with old DT blobs on new kernels but not vice versa. As a consequence, the DT changes are based on top of the driver changes and are now in this branch. For NXP i.MX and Samsung Exynos, the changes in here depend on other changes that got merged through the clk maintainer tree" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (35 commits) ARM: dts: exynos: Add support of Bus frequency using VDD_INT for exynos5422-odroidxu3 ARM: dts: exynos: Add bus nodes using VDD_INT for Exynos542x SoC ARM: dts: exynos: Add NoC Probe dt node for Exynos542x SoC ARM: dts: exynos: Add support of bus frequency for exynos4412-trats/odroidu3 ARM: dts: exynos: Expand the voltage range of buck1/3 regulator for exynos4412-odroidu3 ARM: dts: exynos: Add support of bus frequency using VDD_INT for exynos3250-rinato ARM: dts: exynos: Add exynos4412-ppmu-common dtsi to delete duplicate PPMU nodes ARM: dts: exynos: Add bus nodes using VDD_MIF for Exynos4210 ARM: dts: exynos: Add bus nodes using VDD_INT for Exynos4x12 ARM: dts: exynos: Add bus nodes using VDD_MIF for Exynos4x12 ARM: dts: exynos: Add bus nodes using VDD_INT for Exynos3250 ARM: dts: exynos: Add DMC bus frequency for exynos3250-rinato/monk ARM: dts: exynos: Add DMC bus node for Exynos3250 ARM: tegra: Enable XUSB on Nyan ARM: tegra: Enable XUSB on Jetson TK1 ARM: tegra: Enable XUSB on Venice2 ARM: tegra: Add Tegra124 XUSB controller ARM: tegra: Move Tegra124 to the new XUSB pad controller binding ARM: dts: r8a7794: Use SYSC "always-on" PM Domain ARM: dts: r8a7793: Use SYSC "always-on" PM Domain ...
2016-04-27ARM: dts: r8a7791: Use SYSC "always-on" PM DomainGeert Uytterhoeven1-73/+73
Hook up all devices that are part of the CPG/MSTP Clock Domain to the SYSC "always-on" PM Domain, for a more consistent device-power-area description in DT. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-27ARM: dts: r8a7791: Add SYSC PM DomainsGeert Uytterhoeven1-0/+10
Add a device node for the System Controller. Hook up the Cortex-A15 CPU cores and the Cortex-A15 L2 cache/SCU to their respective PM Domains. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-26Merge tag 'renesas-fixes-for-v4.6' of ↵Arnd Bergmann1-4/+1
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Renesas ARM Based SoC Fixes for v4.6 * Correct preset_lpj calculation which may lead to too short delays * Correct handling of optional clocks on r8a7791 to restore access to the serial port the porter board This is a backmerge of v4.6 fixes, to avoid a merge conflict between 4.6 and our next/dt branch. * tag 'renesas-fixes-for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: timer: Fix preset_lpj leading to too short delays Revert "ARM: dts: porter: Enable SCIF_CLK frequency and pins" ARM: dts: r8a7791: Don't disable referenced optional clocks
2016-04-20ARM: dts: r8a7791: Use USB3.0 fallback compatibility stringSimon Horman1-1/+1
Use recently added fallback compatibility string in r8a7791 device tree. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-04-20ARM: dts: r8a7791: use fallback can compatibility stringSimon Horman1-2/+2
Use recently added fallback compatibility string in r8a7791 device tree. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-04-20ARM: dts: r8a7791: use fallback jpu compatibility stringSimon Horman1-1/+1
Use recently added fallback compatibility string in r8a7791 device tree. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-04-20ARM: dts: r8a7791: Don't disable referenced optional clocksSjoerd Simons1-4/+1
clk_get on a disabled clock node will return EPROBE_DEFER, which can cause drivers to be deferred forever if such clocks are referenced in their clocks property. Update the various disabled external clock nodes to default to a frequency of 0, but don't disable them to prevent this. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-03-28ARM: dts: r8a7791: Remove unnecessary clock-output-names propertiesSimon Horman1-54/+25
* Fixed rate and fixed factor clocks do not require an clock-output-names property. * Since 07705583e920fef6 ("clk: shmobile: div6: Make clock-output-names optional") Renesas div6 clocks do not require a clock-output-names property. In the above cases there is only one clock output and its name is taken from that of the clock node. Accordingly, remove the unnecessary clock-output-names properties and as necessary update the node names. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-02-19ARM: dts: r8a7791: Add L2 cache-controller nodeGeert Uytterhoeven1-0/+8
Add a device node for the L2 cache, and link the CPU nodes to it. The L2 cache for the Cortex-A15 CPU cores is 1 MiB large (organized as 64 KiB x 16 ways). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-02-16ARM: dts: r8a7791: enable to use thermal-zoneKuninori Morimoto1-2/+24
This patch enables to use thermal-zone on r8a7791. This thermal sensor can measure temperature from -40000 to 125000, but over 117000 can be critical on this chip. Thus, default critical temperature is now set as 115000 (this driver is using 5000 steps) (Current critical temperature is using it as 90000, but there is no big reason about it) And it doesn't check thermal zone periodically (same as current behavior). You can exchange it by modifying polling-delay[-passive] property. You can set trip temp if your kernel has CONFIG_THERMAL_WRITABLE_TRIPS, but you need to take care to use it, since it will call orderly_poweroff() it it reaches to the value. echo $temp > /sys/class/thermal/thermal_zone0/trip_point_0_temp Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-02-15ARM: dts: r8a7791: use fallback pci compatibility stringSimon Horman1-2/+2
Use recently added fallback compatibility string in r8a7791 device tree. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-02-15ARM: dts: r8a7791: use fallback pcie compatibility stringSimon Horman1-1/+1
Use recently added fallback compatibility string in r8a7791 device tree. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-02-09ARM: dts: r8a7791: Add BRG support for (H)SCIFGeert Uytterhoeven1-18/+36
Add the device node for the external SCIF_CLK. The presence of the SCIF_CLK crystal and its clock frequency depends on the actual board. Add the two optional clock sources (ZS_CLK and SCIF_CLK for the internal resp. external clock) for the Baud Rate Generator for External Clock (BRG) to all SCIF and HSCIF device nodes. This increases the range and accuracy of supported baud rates on (H)SCIF. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-02-09ARM: dts: r8a7791: Rename the serial port clock to fckLaurent Pinchart1-18/+18
The clock is really the device functional clock, not the interface clock. Rename it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-02-09ARM: dts: r8a7791: Add SCIF fallback compatibility stringsGeert Uytterhoeven1-18/+36
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-01-25ARM: dts: r8a7791: use GIC_* definesSimon Horman1-193/+193
Use GIC_* defines for GIC interrupt cells in r8a7791 device tree. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-01-25ARM: dts: r8a7791: use fallback usbhs compatibility stringSimon Horman1-1/+1
Use recently added fallback compatibility string in r8a7791 device tree. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-12-17ARM: shmobile: r8a779x: use SoC-specific usb-dmac compatibility stringsSimon Horman1-2/+2
Use recently SoC-specific compatibility strings in r8a779[01] device trees. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-15ARM: shmobile: r8a7791: IPMMU compat string SoC part number updateMagnus Damm1-7/+7
Update IPMMU compat strings to include SoC part number. By specifying SoC part number in DT it becomes possible to implement SoC specific features in the IPMMU driver. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-15ARM: shmobile: r8a7791: dtsi: add internal delay for i2c IPsWolfram Sang1-0/+6
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-07ARM: shmobile: r8a7791: add EtherAVB DT supportSergei Shtylyov1-0/+12
Define the generic R8A7791 part of the EtherAVB device node. Based on the commit f25d6b977240 ("ARM: shmobile: r8a7790: add EtherAVB DT support"). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-07ARM: shmobile: r8a7791: add EtherAVB clockSergei Shtylyov1-4/+6
Add the EtherAVB clock to the R8A7791 device tree. Based on the commit 63d2d750c902 ("ARM: shmobile: r8a7790: add EtherAVB clocks"). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-25ARM: shmobile: r8a7791: remove deprecated #gpio-range-cells from dtsiWolfram Sang1-1/+0
Commit a1bc260bb5f5d9 ("gpio: clean up gpio-ranges documentation") declares the above property deprecated. That was more than 2 years ago. Remove it, so it doesn't get copied around needlessly. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-24Merge tag 'v4.4-rc1' into HEADSimon Horman1-0/+1
Linux 4.4-rc1
2015-11-17ARM: shmobile: r8a7791: Use SoC specific binding for rcar-dmac nodesSimon Horman1-4/+4
Use the new SoC specific binding for rcar-dmac and the generic binding as a fall-back in the r8a7791 device tree. In general Renesas hardware is not documented to the extent where the relationship between IP blocks on different SoCs can be assumed although they may appear to operate the same way. Furthermore the documentation typically does not specify a version for individual IP blocks. For these reasons a convention of using the SoC name in place of a version and providing SoC-specific compat strings has been adopted. Although not universally liked this convention is used in the bindings for most drivers for Renesas hardware. The purpose of this patch is to update the Renesas R-Car DMA Controller nodes to follow this convention. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-09Merge branch 'next/arm64' into next/dtOlof Johansson1-0/+1
Merging in the few patches I had kept separate from main next/dt, since others got merged here directly. * next/arm64: arm64: defconfig: Enable PCI generic host bridge by default arm64: Juno: Add support for the PCIe host bridge on Juno R1 Documentation: of: Document the bindings used by Juno R1 PCIe host bridge arm64: dts: mt8173: Add clocks for SCPSYS unit arm64: dts: mt8173: Add subsystem clock controller device nodes + Linux 4.3-rc5
2015-10-23ARM: shmobile: r8a7791: fix "gpio-ranges" propsSergei Shtylyov1-1/+1
On R8A7791, GPIO banks 1 and 7 are missing pins 26 to 31. Correct the "gpio-ranges" properties of the GPIO1 node (GPIO7 is already correct). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-19ARM: shmobile: r8a7791 dtsi: Remove bogus imp_clk nodeGeert Uytterhoeven1-8/+0
R-Car M2-W does not have an IMP core or an IMP clock. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-09-29ARM: shmobile: r8a7791 dtsi: Add CPG/MSTP Clock Domain for soundGeert Uytterhoeven1-0/+1
797a0626e08c ("ARM: shmobile: r8a7791 dtsi: Add CPG/MSTP Clock Domain") added CPG/MSTP clock-cells domain support, but it was missing sound support. This patch adds it. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> [horms: updated commit id referred to in changelog] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-09-14ARM: shmobile: r8a7791: tidyup SSI resource regionKuninori Morimoto1-1/+1
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-08-12ARM: shmobile: r8a7791 dtsi: Add CPG/MSTP Clock DomainGeert Uytterhoeven1-8/+80
Add an appropriate "#power-domain-cells" property to the cpg_clocks device node, to create the CPG/MSTP Clock Domain. Add "power-domains" properties to all device nodes for devices that are part of the CPG/MSTP Clock Domain and can be power-managed through an MSTP clock. This applies to most on-SoC devices, which have a one-to-one mapping from SoC device to DT device node. Notable exceptions are the "display" and "sound" nodes, which represent multiple SoC devices, each having their own MSTP clocks. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-07-28ARM: shmobile: r8a7791: Add JPU device node.Mikhail Ulyanov1-0/+7
This patch contains device tree node definition for JPEG codec peripheral found in the Renesas R-Car r8a7791 SoC. Signed-off-by: Mikhail Ulyanov <mikhail.ulyanov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-07-22ARM: shmobile: r8a7791: Add Audio MIX support on DTSIKuninori Morimoto1-0/+7
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-07-22ARM: shmobile: r8a7791: Add Audio CTU support on DTSIKuninori Morimoto1-0/+16
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-07-06ARM: shmobile: r8a7791 dtsi: Use "arm,gic-400" for GICGeert Uytterhoeven1-1/+1
Replace the "arm,cortex-a15-gic" compatible value for the GIC by "arm,gic-400", as the R-Car Gen2 GIC is assumed to be a GIC-400. This has been confirmed by reading the GICD_IIDR register, which reports 0x0200043b (GIC-400 = 0x02, ARM = 0x43b). This has no effect on runtime behavior, as currently the GIC driver treats both compatible values the same. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-05-26ARM: shmobile: r8a7791 dtsi: Describe DMA for the serial portsGeert Uytterhoeven1-0/+36
Add DMA properties to all SCIF, SCIFA, SCIFB, and HSCIF device nodes. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-05-25ARM: shmobile: r8a7791: add MMCIF max-frequencyKuninori Morimoto1-0/+1
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-05-12ARM: shmobile: r8a7791: Enable DMA for HSUSBYoshihiro Shimoda1-0/+3
This patch adds DMA properties to the HSUSB node. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-05-12ARM: shmobile: r8a7791: add USB-DMAC device nodesYoshihiro Shimoda1-0/+22
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-05-11ARM: shmobile: r8a7791 dtsi: Use generic names for device nodesGeert Uytterhoeven1-1/+1
rcar_sound -> sound Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-05-11ARM: shmobile: r8a7791: Add IRQC clock to device treeGeert Uytterhoeven1-0/+9
Link the external IRQ controller irqc0 to the IRQC module clock, so it can be power managed using that clock. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-04-27ARM: shmobile: r8a7791: Remove MSIOF address from device treeRyo Kataoka1-3/+3
MSIOF Base Address H'E6xx can be accessed by CPU and DMAC. MSIOF Base Address H'E7xx for DMAC was removed from H/W manual. Signed-off-by: Ryo Kataoka <ryo.kataoka.wt@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-11ARM: shmobile: r8a7791: sound enables Audio DMAC entry on DTSIKuninori Morimoto1-22/+108
This patch adds Audio DMAC (= rcar-dmac) entry for sound Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-11ARM: shmobile: r8a7791: enable Audio DMAC peri peri via sound driverKuninori Morimoto1-9/+3
Audio DMAC peri peri is no longer DMAEngine. it is supported by sound driver. this patch enable it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-11ARM: shmobile: r8a7791: add reg-names for soundKuninori Morimoto1-0/+2
Rensas R-Car sound driver supports reg-names. Let's use it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 20:26:02 +0000