diff options
81 files changed, 381 insertions, 241 deletions
diff --git a/Documentation/devicetree/bindings/serial/rs485.yaml b/Documentation/devicetree/bindings/serial/rs485.yaml index 9418fd66a8e9..b93254ad2a28 100644 --- a/Documentation/devicetree/bindings/serial/rs485.yaml +++ b/Documentation/devicetree/bindings/serial/rs485.yaml @@ -18,16 +18,15 @@ properties: description: prop-encoded-array <a b> $ref: /schemas/types.yaml#/definitions/uint32-array items: - items: - - description: Delay between rts signal and beginning of data sent in - milliseconds. It corresponds to the delay before sending data. - default: 0 - maximum: 100 - - description: Delay between end of data sent and rts signal in milliseconds. - It corresponds to the delay after sending data and actual release - of the line. - default: 0 - maximum: 100 + - description: Delay between rts signal and beginning of data sent in + milliseconds. It corresponds to the delay before sending data. + default: 0 + maximum: 100 + - description: Delay between end of data sent and rts signal in milliseconds. + It corresponds to the delay after sending data and actual release + of the line. + default: 0 + maximum: 100 rs485-rts-active-high: description: drive RTS high when sending (this is the default). diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml index 788c80e47831..070eba9f19d3 100644 --- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml @@ -27,6 +27,7 @@ properties: - samsung,exynos4210-uart - samsung,exynos5433-uart - samsung,exynos850-uart + - samsung,exynos8895-uart - items: - enum: - samsung,exynos7-uart @@ -160,18 +161,27 @@ allOf: contains: enum: - google,gs101-uart + - samsung,exynos8895-uart then: required: - samsung,uart-fifosize properties: - reg-io-width: false - clocks: maxItems: 2 clock-names: maxItems: 2 + - if: + properties: + compatible: + contains: + enum: + - google,gs101-uart + then: + properties: + reg-io-width: false + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml index 4cdb0dcaccf3..1c163cb5dff1 100644 --- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml +++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml @@ -37,6 +37,8 @@ properties: - const: renesas,rzn1-uart - items: - enum: + - brcm,bcm11351-dw-apb-uart + - brcm,bcm21664-dw-apb-uart - rockchip,px30-uart - rockchip,rk1808-uart - rockchip,rk3036-uart @@ -48,18 +50,13 @@ properties: - rockchip,rk3328-uart - rockchip,rk3368-uart - rockchip,rk3399-uart + - rockchip,rk3528-uart - rockchip,rk3568-uart + - rockchip,rk3576-uart - rockchip,rk3588-uart - rockchip,rv1108-uart - rockchip,rv1126-uart - - const: snps,dw-apb-uart - - items: - - enum: - - brcm,bcm11351-dw-apb-uart - - brcm,bcm21664-dw-apb-uart - - const: snps,dw-apb-uart - - items: - - enum: + - sophgo,sg2044-uart - starfive,jh7100-hsuart - starfive,jh7100-uart - starfive,jh7110-uart diff --git a/Documentation/devicetree/bindings/serial/sprd-uart.yaml b/Documentation/devicetree/bindings/serial/sprd-uart.yaml index f4dbb6dc2b6e..a2a5056eba04 100644 --- a/Documentation/devicetree/bindings/serial/sprd-uart.yaml +++ b/Documentation/devicetree/bindings/serial/sprd-uart.yaml @@ -17,6 +17,7 @@ properties: oneOf: - items: - enum: + - sprd,sc9632-uart - sprd,sc9860-uart - sprd,sc9863a-uart - sprd,ums512-uart diff --git a/drivers/mailbox/omap-mailbox.c b/drivers/mailbox/omap-mailbox.c index 6797770474a5..680243751d62 100644 --- a/drivers/mailbox/omap-mailbox.c +++ b/drivers/mailbox/omap-mailbox.c @@ -15,6 +15,7 @@ #include <linux/slab.h> #include <linux/kfifo.h> #include <linux/err.h> +#include <linux/io.h> #include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> diff --git a/drivers/misc/eeprom/eeprom_93cx6.c b/drivers/misc/eeprom/eeprom_93cx6.c index 9627294fe3e9..e6f0e0fc1ca2 100644 --- a/drivers/misc/eeprom/eeprom_93cx6.c +++ b/drivers/misc/eeprom/eeprom_93cx6.c @@ -8,6 +8,7 @@ * Supported chipsets: 93c46 & 93c66. */ +#include <linux/bits.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/delay.h> @@ -102,7 +103,7 @@ static void eeprom_93cx6_write_bits(struct eeprom_93cx6 *eeprom, /* * Check if this bit needs to be set. */ - eeprom->reg_data_in = !!(data & (1 << (i - 1))); + eeprom->reg_data_in = !!(data & BIT(i - 1)); /* * Write the bit to the eeprom register. @@ -152,7 +153,7 @@ static void eeprom_93cx6_read_bits(struct eeprom_93cx6 *eeprom, * Read if the bit has been set. */ if (eeprom->reg_data_out) - buf |= (1 << (i - 1)); + buf |= BIT(i - 1); eeprom_93cx6_pulse_low(eeprom); } @@ -186,6 +187,11 @@ void eeprom_93cx6_read(struct eeprom_93cx6 *eeprom, const u8 word, eeprom_93cx6_write_bits(eeprom, command, PCI_EEPROM_WIDTH_OPCODE + eeprom->width); + if (has_quirk_extra_read_cycle(eeprom)) { + eeprom_93cx6_pulse_high(eeprom); + eeprom_93cx6_pulse_low(eeprom); + } + /* * Read the requested 16 bits. */ @@ -252,6 +258,11 @@ void eeprom_93cx6_readb(struct eeprom_93cx6 *eeprom, const u8 byte, eeprom_93cx6_write_bits(eeprom, command, PCI_EEPROM_WIDTH_OPCODE + eeprom->width + 1); + if (has_quirk_extra_read_cycle(eeprom)) { + eeprom_93cx6_pulse_high(eeprom); + eeprom_93cx6_pulse_low(eeprom); + } + /* * Read the requested 8 bits. */ diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c index 25c201cfb91e..e5da9ce26006 100644 --- a/drivers/tty/serial/8250/8250_aspeed_vuart.c +++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c @@ -569,7 +569,7 @@ static struct platform_driver aspeed_vuart_driver = { .of_match_table = aspeed_vuart_table, }, .probe = aspeed_vuart_probe, - .remove_new = aspeed_vuart_remove, + .remove = aspeed_vuart_remove, }; module_platform_driver(aspeed_vuart_driver); diff --git a/drivers/tty/serial/8250/8250_bcm2835aux.c b/drivers/tty/serial/8250/8250_bcm2835aux.c index d7a0f271263a..fdb53b54e99e 100644 --- a/drivers/tty/serial/8250/8250_bcm2835aux.c +++ b/drivers/tty/serial/8250/8250_bcm2835aux.c @@ -267,7 +267,7 @@ static struct platform_driver bcm2835aux_serial_driver = { .pm = pm_ptr(&bcm2835aux_dev_pm_ops), }, .probe = bcm2835aux_serial_probe, - .remove_new = bcm2835aux_serial_remove, + .remove = bcm2835aux_serial_remove, }; module_platform_driver(bcm2835aux_serial_driver); diff --git a/drivers/tty/serial/8250/8250_bcm7271.c b/drivers/tty/serial/8250/8250_bcm7271.c index 2569ca69223f..d0b18358859e 100644 --- a/drivers/tty/serial/8250/8250_bcm7271.c +++ b/drivers/tty/serial/8250/8250_bcm7271.c @@ -812,7 +812,7 @@ static int brcmuart_handle_irq(struct uart_port *p) /* * if Receive Data Interrupt is enabled and * we're uing hardware flow control, deassert - * RTS and wait for any chars in the pipline to + * RTS and wait for any chars in the pipeline to * arrive and then check for DR again. */ if ((ier & UART_IER_RDI) && (up->mcr & UART_MCR_AFE)) { @@ -1204,7 +1204,7 @@ static struct platform_driver brcmuart_platform_driver = { .of_match_table = brcmuart_dt_ids, }, .probe = brcmuart_probe, - .remove_new = brcmuart_remove, + .remove = brcmuart_remove, }; static int __init brcmuart_init(void) diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index ab9e7f204260..6afcf27db3b8 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -750,7 +750,7 @@ static const struct dw8250_platform_data dw8250_renesas_rzn1_data = { .quirks = DW_UART_QUIRK_CPR_VALUE | DW_UART_QUIRK_IS_DMA_FC, }; -static const struct dw8250_platform_data dw8250_starfive_jh7100_data = { +static const struct dw8250_platform_data dw8250_skip_set_rate_data = { .usr_reg = DW_UART_USR, .quirks = DW_UART_QUIRK_SKIP_SET_RATE, }; @@ -760,7 +760,8 @@ static const struct of_device_id dw8250_of_match[] = { { .compatible = "cavium,octeon-3860-uart", .data = &dw8250_octeon_3860_data }, { .compatible = "marvell,armada-38x-uart", .data = &dw8250_armada_38x_data }, { .compatible = "renesas,rzn1-uart", .data = &dw8250_renesas_rzn1_data }, - { .compatible = "starfive,jh7100-uart", .data = &dw8250_starfive_jh7100_data }, + { .compatible = "sophgo,sg2044-uart", .data = &dw8250_skip_set_rate_data }, + { .compatible = "starfive,jh7100-uart", .data = &dw8250_skip_set_rate_data }, { /* Sentinel */ } }; MODULE_DEVICE_TABLE(of, dw8250_of_match); @@ -796,7 +797,7 @@ static struct platform_driver dw8250_platform_driver = { .acpi_match_table = dw8250_acpi_match, }, .probe = dw8250_probe, - .remove_new = dw8250_remove, + .remove = dw8250_remove, }; module_platform_driver(dw8250_platform_driver); diff --git a/drivers/tty/serial/8250/8250_em.c b/drivers/tty/serial/8250/8250_em.c index a754755100ff..35094f884492 100644 --- a/drivers/tty/serial/8250/8250_em.c +++ b/drivers/tty/serial/8250/8250_em.c @@ -219,7 +219,7 @@ static struct platform_driver serial8250_em_platform_driver = { .of_match_table = serial8250_em_dt_ids, }, .probe = serial8250_em_probe, - .remove_new = serial8250_em_remove, + .remove = serial8250_em_remove, }; module_platform_driver(serial8250_em_platform_driver); diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c index b7a75db15249..fc5203446267 100644 --- a/drivers/tty/serial/8250/8250_exar.c +++ b/drivers/tty/serial/8250/8250_exar.c @@ -11,6 +11,7 @@ #include <linux/delay.h> #include <linux/device.h> #include <linux/dmi.h> +#include <linux/eeprom_93cx6.h> #include <linux/interrupt.h> #include <linux/io.h> #include <linux/math.h> @@ -135,8 +136,6 @@ #define UART_EXAR_REGB_EECS BIT(5) #define UART_EXAR_REGB_EEDI BIT(6) #define UART_EXAR_REGB_EEDO BIT(7) -#define UART_EXAR_REGB_EE_ADDR_SIZE 6 -#define UART_EXAR_REGB_EE_DATA_SIZE 16 #define UART_EXAR_XR17C15X_PORT_OFFSET 0x200 #define UART_EXAR_XR17V25X_PORT_OFFSET 0x200 @@ -179,18 +178,19 @@ /* CTI EEPROM offsets */ #define CTI_EE_OFF_XR17C15X_OSC_FREQ 0x04 /* 2 words */ -#define CTI_EE_OFF_XR17V25X_OSC_FREQ 0x08 /* 2 words */ #define CTI_EE_OFF_XR17C15X_PART_NUM 0x0A /* 4 words */ -#define CTI_EE_OFF_XR17V25X_PART_NUM 0x0E /* 4 words */ #define CTI_EE_OFF_XR17C15X_SERIAL_NUM 0x0E /* 1 word */ + +#define CTI_EE_OFF_XR17V25X_OSC_FREQ 0x08 /* 2 words */ +#define CTI_EE_OFF_XR17V25X_PART_NUM 0x0E /* 4 words */ #define CTI_EE_OFF_XR17V25X_SERIAL_NUM 0x12 /* 1 word */ + #define CTI_EE_OFF_XR17V35X_SERIAL_NUM 0x11 /* 2 word */ #define CTI_EE_OFF_XR17V35X_BRD_FLAGS 0x13 /* 1 word */ #define CTI_EE_OFF_XR17V35X_PORT_FLAGS 0x14 /* 1 word */ #define CTI_EE_MASK_PORT_FLAGS_TYPE GENMASK(7, 0) -#define CTI_EE_MASK_OSC_FREQ_LOWER GENMASK(15, 0) -#define CTI_EE_MASK_OSC_FREQ_UPPER GENMASK(31, 16) +#define CTI_EE_MASK_OSC_FREQ GENMASK(31, 0) #define CTI_FPGA_RS485_IO_REG 0x2008 #define CTI_FPGA_CFG_INT_EN_REG 0x48 @@ -252,6 +252,7 @@ struct exar8250 { unsigned int nr; unsigned int osc_freq; struct exar8250_board *board; + struct eeprom_93cx6 eeprom; void __iomem *virt; int line[]; }; @@ -267,92 +268,37 @@ static inline u8 exar_read_reg(struct exar8250 *priv, unsigned int reg) return readb(priv->virt + reg); } -static inline void exar_ee_select(struct exar8250 *priv) -{ - // Set chip select pin high to enable EEPROM reads/writes - exar_write_reg(priv, UART_EXAR_REGB, UART_EXAR_REGB_EECS); - // Min ~500ns delay needed between CS assert and EEPROM access - udelay(1); -} - -static inline void exar_ee_deselect(struct exar8250 *priv) -{ - exar_write_reg(priv, UART_EXAR_REGB, 0x00); -} - -static inline void exar_ee_write_bit(struct exar8250 *priv, u8 bit) +static void exar_eeprom_93cx6_reg_read(struct eeprom_93cx6 *eeprom) { - u8 value = UART_EXAR_REGB_EECS; + struct exar8250 *priv = eeprom->data; + u8 regb = exar_read_reg(priv, UART_EXAR_REGB); - if (bit) - value |= UART_EXAR_REGB_EEDI; - - // Clock out the bit on the EEPROM interface - exar_write_reg(priv, UART_EXAR_REGB, value); - // 2us delay = ~500khz clock speed - udelay(2); - - value |= UART_EXAR_REGB_EECK; - - exar_write_reg(priv, UART_EXAR_REGB, value); - udelay(2); + /* EECK and EECS always read 0 from REGB so only set EEDO */ + eeprom->reg_data_out = regb & UART_EXAR_REGB_EEDO; } -static inline u8 exar_ee_read_bit(struct exar8250 *priv) +static void exar_eeprom_93cx6_reg_write(struct eeprom_93cx6 *eeprom) { - u8 regb; - u8 value = UART_EXAR_REGB_EECS; - - // Clock in the bit on the EEPROM interface - exar_write_reg(priv, UART_EXAR_REGB, value); - // 2us delay = ~500khz clock speed - udelay(2); + struct exar8250 *priv = eeprom->data; + u8 regb = 0; - value |= UART_EXAR_REGB_EECK; + if (eeprom->reg_data_in) + regb |= UART_EXAR_REGB_EEDI; + if (eeprom->reg_data_clock) + regb |= UART_EXAR_REGB_EECK; + if (eeprom->reg_chip_select) + regb |= UART_EXAR_REGB_EECS; - exar_write_reg(priv, UART_EXAR_REGB, value); - udelay(2); - - regb = exar_read_reg(priv, UART_EXAR_REGB); - - return (regb & UART_EXAR_REGB_EEDO ? 1 : 0); + exar_write_reg(priv, UART_EXAR_REGB, regb); } -/** - * exar_ee_read() - Read a word from the EEPROM - * @priv: Device's private structure - * @ee_addr: Offset of EEPROM to read word from - * - * Read a single 16bit word from an Exar UART's EEPROM. - * The type of the EEPROM is AT93C46D. - * - * Return: EEPROM word - */ -static u16 exar_ee_read(struct exar8250 *priv, u8 ee_addr) +static void exar_eeprom_init(struct exar8250 *priv) { - int i; - u16 data = 0; - - exar_ee_select(priv); - - // Send read command (opcode 110) - exar_ee_write_bit(priv, 1); - exar_ee_write_bit(priv, 1); - exar_ee_write_bit(priv, 0); - - // Send address to read from - for (i = UART_EXAR_REGB_EE_ADDR_SIZE - 1; i >= 0; i--) - exar_ee_write_bit(priv, ee_addr & BIT(i)); - - // Read data 1 bit at a time starting with a dummy bit - for (i = UART_EXAR_REGB_EE_DATA_SIZE; i >= 0; i--) { - if (exar_ee_read_bit(priv)) - data |= BIT(i); - } - - exar_ee_deselect(priv); - - return data; + priv->eeprom.data = priv; + priv->eeprom.register_read = exar_eeprom_93cx6_reg_read; + priv->eeprom.register_write = exar_eeprom_93cx6_reg_write; + priv->eeprom.width = PCI_EEPROM_WIDTH_93C46; + priv->eeprom.quirks |= PCI_EEPROM_QUIRK_EXTRA_READ_CYCLE; } /** @@ -360,7 +306,7 @@ static u16 exar_ee_read(struct exar8250 *priv, u8 ee_addr) * @priv: Device's private structure * @mpio_num: MPIO number/offset to configure * - * Configure a single MPIO as an output and disable tristate. It is reccomended + * Configure a single MPIO as an output and disable tristate. It is recommended * to set the level with exar_mpio_set_high()/exar_mpio_set_low() prior to * calling this function to ensure default MPIO pin state. * @@ -516,7 +462,7 @@ static int xr17v35x_startup(struct uart_port *port) serial_port_out(port, UART_XR_EFR, UART_EFR_ECB); /* - * Make sure all interrups are masked until initialization is + * Make sure all interrupts are masked until initialization is * complete and the FIFOs are cleared * * Synchronize UART_IER access against the console. @@ -696,20 +642,16 @@ static int cti_plx_int_enable(struct exar8250 *priv) */ static int cti_read_osc_freq(struct exar8250 *priv, u8 eeprom_offset) { - u16 lower_word; - u16 upper_word; + __le16 ee_words[2]; + u32 osc_freq; - lower_word = exar_ee_read(priv, eeprom_offset); - // Check if EEPROM word was blank - if (lower_word == 0xFFFF) - return -EIO; + eeprom_93cx6_multiread(&priv->eeprom, eeprom_offset, ee_words, ARRAY_SIZE(ee_words)); - upper_word = exar_ee_read(priv, (eeprom_offset + 1)); - if (upper_word == 0xFFFF) + osc_freq = le16_to_cpu(ee_words[0]) | (le16_to_cpu(ee_words[1]) << 16); + if (osc_freq == CTI_EE_MASK_OSC_FREQ) return -EIO; - return FIELD_PREP(CTI_EE_MASK_OSC_FREQ_LOWER, lower_word) | - FIELD_PREP(CTI_EE_MASK_OSC_FREQ_UPPER, upper_word); + return osc_freq; } /** @@ -833,7 +775,7 @@ static enum cti_port_type cti_get_port_type_xr17v35x(struct exar8250 *priv, u8 offset; offset = CTI_EE_OFF_XR17V35X_PORT_FLAGS + port_num; - port_flags = exar_ee_read(priv, offset); + eeprom_93cx6_read(&priv->eeprom, offset, &port_flags); port_type = FIELD_GET(CTI_EE_MASK_PORT_FLAGS_TYPE, port_flags); if (CTI_PORT_TYPE_VALID(port_type)) @@ -1551,6 +1493,8 @@ exar_pci_probe(struct pci_dev *pcidev, const struct pci_device_id *ent) if (rc) return rc; + exar_eeprom_init(priv); + for (i = 0; i < nr_ports && i < maxnr; i++) { rc = board->setup(priv, pcidev, &uart, i); if (rc) { diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c index e2aa2a1a02dd..b4461a89b8d0 100644 --- a/drivers/tty/serial/8250/8250_fintek.c +++ b/drivers/tty/serial/8250/8250_fintek.c @@ -21,6 +21,7 @@ #define CHIP_ID_F81866 0x1010 #define CHIP_ID_F81966 0x0215 #define CHIP_ID_F81216AD 0x1602 +#define CHIP_ID_F81216E 0x1617 #define CHIP_ID_F81216H 0x0501 #define CHIP_ID_F81216 0x0802 #define VENDOR_ID1 0x23 @@ -125,7 +126,7 @@ static int fintek_8250_enter_key(u16 base_port, u8 key) if (!request_muxed_region(base_port, 2, "8250_fintek")) return -EBUSY; - /* Force to deactive all SuperIO in this base_port */ + /* Force to deactivate all SuperIO in this base_port */ outb(EXIT_KEY, base_port + ADDR_PORT); outb(key, base_port + ADDR_PORT); @@ -158,6 +159,7 @@ static int fintek_8250_check_id(struct fintek_8250 *pdata) case CHIP_ID_F81866: case CHIP_ID_F81966: case CHIP_ID_F81216AD: + case CHIP_ID_F81216E: case CHIP_ID_F81216H: case CHIP_ID_F81216: break; @@ -181,6 +183,7 @@ static int fintek_8250_get_ldn_range(struct fintek_8250 *pdata, int *min, return 0; case CHIP_ID_F81216AD: + case CHIP_ID_F81216E: case CHIP_ID_F81216H: case CHIP_ID_F81216: *min = F81216_LDN_LOW; @@ -250,6 +253,7 @@ static void fintek_8250_set_irq_mode(struct fintek_8250 *pdata, bool is_level) break; case CHIP_ID_F81216AD: + case CHIP_ID_F81216E: case CHIP_ID_F81216H: case CHIP_ID_F81216: sio_write_mask_reg(pdata, FINTEK_IRQ_MODE, IRQ_SHARE, @@ -263,7 +267,8 @@ static void fintek_8250_set_irq_mode(struct fintek_8250 *pdata, bool is_level) static void fintek_8250_set_max_fifo(struct fintek_8250 *pdata) { switch (pdata->pid) { - case CHIP_ID_F81216H: /* 128Bytes FIFO */ + case CHIP_ID_F81216E: /* 128Bytes FIFO */ + case CHIP_ID_F81216H: case CHIP_ID_F81966: case CHIP_ID_F81866: sio_write_mask_reg(pdata, FIFO_CTRL, @@ -297,6 +302,7 @@ static void fintek_8250_set_termios(struct uart_port *port, goto exit; switch (pdata->pid) { + case CHIP_ID_F81216E: case CHIP_ID_F81216H: reg = RS485; break; @@ -346,6 +352,7 @@ static void fintek_8250_set_termios_handler(struct uart_8250_port *uart) struct fintek_8250 *pdata = uart->port.private_data; switch (pdata->pid) { + case CHIP_ID_F81216E: case CHIP_ID_F81216H: case CHIP_ID_F81966: case CHIP_ID_F81866: @@ -438,6 +445,11 @@ static void fintek_8250_set_rs485_handler(struct uart_8250_port *uart) uart->port.rs485_supported = fintek_8250_rs485_supported; break; + case CHIP_ID_F81216E: /* F81216E does not support RS485 delays */ + uart->port.rs485_config = fintek_8250_rs485_config; + uart->port.rs485_supported = fintek_8250_rs485_supported; + break; + default: /* No RS485 Auto direction functional */ break; } diff --git a/drivers/tty/serial/8250/8250_fsl.c b/drivers/tty/serial/8250/8250_fsl.c index b4ed442082a8..1b7bd55619c6 100644 --- a/drivers/tty/serial/8250/8250_fsl.c +++ b/drivers/tty/serial/8250/8250_fsl.c @@ -179,7 +179,7 @@ static struct platform_driver fsl8250_platform_driver = { .acpi_match_table = ACPI_PTR(fsl_8250_acpi_id), }, .probe = fsl8250_acpi_probe, - .remove_new = fsl8250_acpi_remove, + .remove = fsl8250_acpi_remove, }; module_platform_driver(fsl8250_platform_driver); diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c index a2783e38a2e3..a73dd3773640 100644 --- a/drivers/tty/serial/8250/8250_ingenic.c +++ b/drivers/tty/serial/8250/8250_ingenic.c @@ -361,7 +361,7 @@ static struct platform_driver ingenic_uart_platform_driver = { .of_match_table = of_match, }, .probe = ingenic_uart_probe, - .remove_new = ingenic_uart_remove, + .remove = ingenic_uart_remove, }; module_platform_driver(ingenic_uart_platform_driver); diff --git a/drivers/tty/serial/8250/8250_ioc3.c b/drivers/tty/serial/8250/8250_ioc3.c index 50c77c3dacf2..499e80aa4cf9 100644 --- a/drivers/tty/serial/8250/8250_ioc3.c +++ b/drivers/tty/serial/8250/8250_ioc3.c @@ -84,7 +84,7 @@ static void serial8250_ioc3_remove(struct platform_device *pdev) static struct platform_driver serial8250_ioc3_driver = { .probe = serial8250_ioc3_probe, - .remove_new = serial8250_ioc3_remove, + .remove = serial8250_ioc3_remove, .driver = { .name = "ioc3-serial8250", } diff --git a/drivers/tty/serial/8250/8250_lpc18xx.c b/drivers/tty/serial/8250/8250_lpc18xx.c index 47e1a056a60c..d52445948da0 100644 --- a/drivers/tty/serial/8250/8250_lpc18xx.c +++ b/drivers/tty/serial/8250/8250_lpc18xx.c @@ -195,7 +195,7 @@ MODULE_DEVICE_TABLE(of, lpc18xx_serial_match); static struct platform_driver lpc18xx_serial_driver = { .probe = lpc18xx_serial_probe, - .remove_new = lpc18xx_serial_remove, + .remove = lpc18xx_serial_remove, .driver = { .name = "lpc18xx-uart", .of_match_table = lpc18xx_serial_match, diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c index b9cca210e171..b44de2ed7413 100644 --- a/drivers/tty/serial/8250/8250_mtk.c +++ b/drivers/tty/serial/8250/8250_mtk.c @@ -346,8 +346,8 @@ mtk8250_set_termios(struct uart_port *port, struct ktermios *termios, /* * Mediatek UARTs use an extra highspeed register (MTK_UART_HIGHS) * - * We need to recalcualte the quot register, as the claculation depends - * on the vaule in the highspeed register. + * We need to recalculate the quot register, as the calculation depends + * on the value in the highspeed register. * * Some baudrates are not supported by the chip, so we use the next * lower rate supported and update termios c_flag. @@ -654,7 +654,7 @@ static struct platform_driver mtk8250_platform_driver = { .of_match_table = mtk8250_of_match, }, .probe = mtk8250_probe, - .remove_new = mtk8250_remove, + .remove = mtk8250_remove, }; module_platform_driver(mtk8250_platform_driver); diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c index e14f47ef1172..64aed7efc569 100644 --- a/drivers/tty/serial/8250/8250_of.c +++ b/drivers/tty/serial/8250/8250_of.c @@ -352,7 +352,7 @@ static struct platform_driver of_platform_serial_driver = { .pm = &of_serial_pm_ops, }, .probe = of_platform_serial_probe, - .remove_new = of_platform_serial_remove, + .remove = of_platform_serial_remove, }; module_platform_driver(of_platform_serial_driver); diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index 88b58f44e4e9..9eb9aa766811 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -776,12 +776,12 @@ static void omap_8250_shutdown(struct uart_port *port) struct uart_8250_port *up = up_to_u8250p(port); struct omap8250_priv *priv = port->private_data; + pm_runtime_get_sync(port->dev); + flush_work(&priv->qos_work); if (up->dma) omap_8250_rx_dma_flush(up); - pm_runtime_get_sync(port->dev); - serial_out(up, UART_OMAP_WER, 0); if (priv->habit & UART_HAS_EFR2) serial_out(up, UART_OMAP_EFR2, 0x0); @@ -1304,7 +1304,7 @@ static void am654_8250_handle_rx_dma(struct uart_8250_port *up, u8 iir, /* * This is mostly serial8250_handle_irq(). We have a slightly different DMA - * hoook for RX/TX and need different logic for them in the ISR. Therefore we + * hook for RX/TX and need different logic for them in the ISR. Therefore we * use the default routine in the non-DMA case and this one for with DMA. */ static int omap_8250_dma_handle_irq(struct uart_port *port) @@ -1338,7 +1338,7 @@ static int omap_8250_dma_handle_irq(struct uart_port *port) serial8250_tx_chars(up); } else { /* - * try again due to an earlier failer which + * try again due to an earlier failure which * might have been resolved by now. */ if (omap_8250_tx_dma(up)) @@ -1867,7 +1867,7 @@ static struct platform_driver omap8250_platform_driver = { .of_match_table = omap8250_dt_ids, }, .probe = omap8250_probe, - .remove_new = omap8250_remove, + .remove = omap8250_remove, }; module_platform_driver(omap8250_platform_driver); diff --git a/drivers/tty/serial/8250/8250_platform.c b/drivers/tty/serial/8250/8250_platform.c index be7ff07cbdd0..8bdc1879d952 100644 --- a/drivers/tty/serial/8250/8250_platform.c +++ b/drivers/tty/serial/8250/8250_platform.c @@ -285,7 +285,7 @@ MODULE_DEVICE_TABLE(acpi, acpi_platform_serial_table); static struct platform_driver serial8250_isa_driver = { .probe = serial8250_probe, - .remove_new = serial8250_remove, + .remove = serial8250_remove, .suspend = serial8250_suspend, .resume = serial8250_resume, .driver = { diff --git a/drivers/tty/serial/8250/8250_pxa.c b/drivers/tty/serial/8250/8250_pxa.c index 96dd6126296c..6dd0190b4843 100644 --- a/drivers/tty/serial/8250/8250_pxa.c +++ b/drivers/tty/serial/8250/8250_pxa.c @@ -154,7 +154,7 @@ static void serial_pxa_remove(struct platform_device *pdev) static struct platform_driver serial_pxa_driver = { .probe = serial_pxa_probe, - .remove_new = serial_pxa_remove, + .remove = serial_pxa_remove, .driver = { .name = "pxa2xx-uart", diff --git a/drivers/tty/serial/8250/8250_tegra.c b/drivers/tty/serial/8250/8250_tegra.c index 60a80d00d251..2f3b0075763f 100644 --- a/drivers/tty/serial/8250/8250_tegra.c +++ b/drivers/tty/serial/8250/8250_tegra.c @@ -182,7 +182,7 @@ static struct platform_driver tegra_uart_driver = { .acpi_match_table = ACPI_PTR(tegra_uart_acpi_match), }, .probe = tegra_uart_probe, - .remove_new = tegra_uart_remove, + .remove = tegra_uart_remove, }; module_platform_driver(tegra_uart_driver); diff --git a/drivers/tty/serial/8250/8250_uniphier.c b/drivers/tty/serial/8250/8250_uniphier.c index 670d2ca0f757..4874a9632db3 100644 --- a/drivers/tty/serial/8250/8250_uniphier.c +++ b/drivers/tty/serial/8250/8250_uniphier.c @@ -282,7 +282,7 @@ MODULE_DEVICE_TABLE(of, uniphier_uart_match); static struct platform_driver uniphier_uart_platform_driver = { .probe = uniphier_uart_probe, - .remove_new = uniphier_uart_remove, + .remove = uniphier_uart_remove, .driver = { .name = "uniphier-uart", .of_match_table = uniphier_uart_match, diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index 1eb20350fcf4..55d26d16df9b 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -150,6 +150,7 @@ config SERIAL_8250_EXAR tristate "8250/16550 Exar/Commtech PCI/PCIe device support" depends on SERIAL_8250 && PCI select SERIAL_8250_PCILIB + select EEPROM_93CX6 default SERIAL_8250 help This builds support for XR17C1xx, XR17V3xx and some Commtech diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c index effcba71ea77..b9c3c3bed0c1 100644 --- a/drivers/tty/serial/altera_jtaguart.c +++ b/drivers/tty/serial/altera_jtaguart.c @@ -175,8 +175,8 @@ static int altera_jtaguart_startup(struct uart_port *port) ret = request_irq(port->irq, altera_jtaguart_interrupt, 0, DRV_NAME, port); if (ret) { - pr_err(DRV_NAME ": unable to attach Altera JTAG UART %d " - "interrupt vector=%d\n", port->line, port->irq); + dev_err(port->dev, "unable to attach Altera JTAG UART %d interrupt vector=%d\n", + port->line, port->irq); return ret; } @@ -449,7 +449,7 @@ MODULE_DEVICE_TABLE(of, altera_jtaguart_match); static struct platform_driver altera_jtaguart_platform_driver = { .probe = altera_jtaguart_probe, - .remove_new = altera_jtaguart_remove, + .remove = altera_jtaguart_remove, .driver = { .name = DRV_NAME, .of_match_table = of_match_ptr(altera_jtaguart_match), diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c index 897f0995b2fe..c94655453c33 100644 --- a/drivers/tty/serial/altera_uart.c +++ b/drivers/tty/serial/altera_uart.c @@ -307,8 +307,8 @@ static int altera_uart_startup(struct uart_port *port) ret = request_irq(port->irq, altera_uart_interrupt, 0, dev_name(port->dev), port); if (ret) { - pr_err(DRV_NAME ": unable to attach Altera UART %d " - "interrupt vector=%d\n", port->line, port->irq); + dev_err(port->dev, "unable to attach Altera UART %d interrupt vector=%d\n", + port->line, port->irq); return ret; } } @@ -617,7 +617,7 @@ MODULE_DEVICE_TABLE(of, altera_uart_match); static struct platform_driver altera_uart_platform_driver = { .probe = altera_uart_probe, - .remove_new = altera_uart_remove, + .remove = altera_uart_remove, .driver = { .name = DRV_NAME, .of_match_table = of_match_ptr(altera_uart_match), diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 1c60850030b1..69b7a3e1e418 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -1819,6 +1819,13 @@ static void pl011_unthrottle_rx(struct uart_port *port) pl011_write(uap->im, uap, REG_IMSC); +#ifdef CONFIG_DMA_ENGINE + if (uap->using_rx_dma) { + uap->dmacr |= UART011_RXDMAE; + pl011_write(uap->dmacr, uap, REG_DMACR); + } +#endif + uart_port_unlock_irqrestore(&uap->port, flags); } @@ -2937,7 +2944,7 @@ MODULE_DEVICE_TABLE(acpi, sbsa_uart_acpi_match); static struct platform_driver arm_sbsa_uart_platform_driver = { .probe = sbsa_uart_probe, - .remove_new = sbsa_uart_remove, + .remove = sbsa_uart_remove, .driver = { .name = "sbsa-uart", .pm = &pl011_dev_pm_ops, diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c index 47889a557119..8bb33556b312 100644 --- a/drivers/tty/serial/ar933x_uart.c +++ b/drivers/tty/serial/ar933x_uart.c @@ -832,7 +832,7 @@ MODULE_DEVICE_TABLE(of, ar933x_uart_of_ids); static struct platform_driver ar933x_uart_platform_driver = { .probe = ar933x_uart_probe, - .remove_new = ar933x_uart_remove, + .remove = ar933x_uart_remove, .driver = { .name = DRIVER_NAME, .of_match_table = of_match_ptr(ar933x_uart_of_ids), diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 09b246c9e389..0cf05ac18993 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -1166,7 +1166,7 @@ static void atmel_rx_from_dma(struct uart_port *port) port->icount.rx += count; } - /* USART retreives ownership of RX DMA buffer */ + /* USART retrieves ownership of RX DMA buffer */ dma_sync_single_for_device(port->dev, atmel_port->rx_phys, ATMEL_SERIAL_RX_SIZE, DMA_FROM_DEVICE); @@ -2419,17 +2419,11 @@ static void atmel_release_port(struct uart_port *port) static int atmel_request_port(struct uart_port *port) { struct platform_device *mpdev = to_platform_device(port->dev->parent); - int size = resource_size(mpdev->resource); - - if (!request_mem_region(port->mapbase, size, "atmel_serial")) - return -EBUSY; if (port->flags & UPF_IOREMAP) { - port->membase = ioremap(port->mapbase, size); - if (port->membase == NULL) { - release_mem_region(port->mapbase, size); - return -ENOMEM; - } + port->membase = devm_platform_ioremap_resource(mpdev, 0); + if (IS_ERR(port->membase)) + return PTR_ERR(port->membase); } return 0; @@ -3017,7 +3011,7 @@ static SIMPLE_DEV_PM_OPS(atmel_serial_pm_ops, atmel_serial_suspend, static struct platform_driver atmel_serial_driver = { .probe = atmel_serial_probe, - .remove_new = atmel_serial_remove, + .remove = atmel_serial_remove, .driver = { .name = "atmel_usart_serial", .of_match_table = of_match_ptr(atmel_serial_dt_ids), diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c index b88cc28c94e3..51df9d2d8bfc 100644 --- a/drivers/tty/serial/bcm63xx_uart.c +++ b/drivers/tty/serial/bcm63xx_uart.c @@ -884,7 +884,7 @@ MODULE_DEVICE_TABLE(of, bcm63xx_of_match); */ static struct platform_driver bcm_uart_platform_driver = { .probe = bcm_uart_probe, - .remove_new = bcm_uart_remove, + .remove = bcm_uart_remove, .driver = { .name = "bcm63xx_uart", .of_match_table = bcm63xx_of_match, diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c index 30425a3d19fb..83186bf50002 100644 --- a/drivers/tty/serial/clps711x.c +++ b/drivers/tty/serial/clps711x.c @@ -529,7 +529,7 @@ static struct platform_driver clps711x_uart_platform = { .of_match_table = of_match_ptr(clps711x_uart_dt_ids), }, .probe = uart_clps711x_probe, - .remove_new = uart_clps711x_remove, + .remove = uart_clps711x_remove, }; static int __init uart_clps711x_init(void) diff --git a/drivers/tty/serial/cpm_uart.c b/drivers/tty/serial/cpm_uart.c index 6eb8625de435..b778a20ec9b1 100644 --- a/drivers/tty/serial/cpm_uart.c +++ b/drivers/tty/serial/cpm_uart.c @@ -1573,7 +1573,7 @@ static struct platform_driver cpm_uart_driver = { .of_match_table = cpm_uart_match, }, .probe = cpm_uart_probe, - .remove_new = cpm_uart_remove, + .remove = cpm_uart_remove, }; static int __init cpm_uart_init(void) diff --git a/drivers/tty/serial/digicolor-usart.c b/drivers/tty/serial/digicolor-usart.c index 2ccd13cc0a89..d2482df5cb9b 100644 --- a/drivers/tty/serial/digicolor-usart.c +++ b/drivers/tty/serial/digicolor-usart.c @@ -522,7 +522,7 @@ static struct platform_driver digicolor_uart_platform = { .of_match_table = of_match_ptr(digicolor_uart_dt_ids), }, .probe = digicolor_uart_probe, - .remove_new = digicolor_uart_remove, + .remove = digicolor_uart_remove, }; static int __init digicolor_uart_init(void) diff --git a/drivers/tty/serial/esp32_acm.c b/drivers/tty/serial/esp32_acm.c index 85eb0392e379..bb7cc65427f0 100644 --- a/drivers/tty/serial/esp32_acm.c +++ b/drivers/tty/serial/esp32_acm.c @@ -423,7 +423,7 @@ static void esp32s3_acm_remove(struct platform_device *pdev) static struct platform_driver esp32s3_acm_driver = { .probe = esp32s3_acm_probe, - .remove_new = esp32s3_acm_remove, + .remove = esp32s3_acm_remove, .driver = { .name = DRIVER_NAME, .of_match_table = esp32s3_acm_dt_ids, diff --git a/drivers/tty/serial/esp32_uart.c b/drivers/tty/serial/esp32_uart.c index 8c86cf9cb763..667c2198a03a 100644 --- a/drivers/tty/serial/esp32_uart.c +++ b/drivers/tty/serial/esp32_uart.c @@ -743,7 +743,7 @@ static void esp32_uart_remove(struct platform_device *pdev) static struct platform_driver esp32_uart_driver = { .probe = esp32_uart_probe, - .remove_new = esp32_uart_remove, + .remove = esp32_uart_remove, .driver = { .name = DRIVER_NAME, .of_match_table = esp32_uart_dt_ids, diff --git a/drivers/tty/serial/fsl_linflexuart.c b/drivers/tty/serial/fsl_linflexuart.c index e972df4b188d..e70a56de1fce 100644 --- a/drivers/tty/serial/fsl_linflexuart.c +++ b/drivers/tty/serial/fsl_linflexuart.c @@ -882,7 +882,7 @@ static SIMPLE_DEV_PM_OPS(linflex_pm_ops, linflex_suspend, linflex_resume); static struct platform_driver linflex_driver = { .probe = linflex_probe, - .remove_new = linflex_remove, + .remove = linflex_remove, .driver = { .name = DRIVER_NAME, .of_match_table = linflex_dt_ids, diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 77efa7ee6eda..57b0632a3db6 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -184,6 +184,7 @@ #define UARTCTRL_SBK 0x00010000 #define UARTCTRL_MA1IE 0x00008000 #define UARTCTRL_MA2IE 0x00004000 +#define UARTCTRL_M7 0x00000800 #define UARTCTRL_IDLECFG GENMASK(10, 8) #define UARTCTRL_LOOPS 0x00000080 #define UARTCTRL_DOZEEN 0x00000040 @@ -2222,8 +2223,9 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios, modem = lpuart32_read(&sport->port, UARTMODIR); sport->is_cs7 = false; /* - * only support CS8 and CS7, and for CS7 must enable PE. + * only support CS8 and CS7 * supported mode: + * - (7,n,1) (imx only) * - (7,e/o,1) * - (8,n,1) * - (8,m/s,1) @@ -2238,7 +2240,7 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios, if ((termios->c_cflag & CSIZE) == CS8 || (termios->c_cflag & CSIZE) == CS7) - ctrl = old_ctrl & ~UARTCTRL_M; + ctrl = old_ctrl & ~(UARTCTRL_M | UARTCTRL_M7); if (termios->c_cflag & CMSPAR) { if ((termios->c_cflag & CSIZE) != CS8) { @@ -2265,9 +2267,18 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios, else bd &= ~UARTBAUD_SBNS; - /* parity must be enabled when CS7 to match 8-bits format */ - if ((termios->c_cflag & CSIZE) == CS7) - termios->c_cflag |= PARENB; + /* + * imx support 7-bits format, no limitation on parity when CS7 + * for layerscape, parity must be enabled when CS7 to match 8-bits format + */ + if ((termios->c_cflag & CSIZE) == CS7 && !(termios->c_cflag & PARENB)) { + if (is_imx7ulp_lpuart(sport) || + is_imx8ulp_lpuart(sport) || + is_imx8qxp_lpuart(sport)) + ctrl |= UARTCTRL_M7; + else + termios->c_cflag |= PARENB; + } if ((termios->c_cflag & PARENB)) { if (termios->c_cflag & CMSPAR) { @@ -3206,7 +3217,7 @@ static const struct dev_pm_ops lpuart_pm_ops = { static struct platform_driver lpuart_driver = { .probe = lpuart_probe, - .remove_new = lpuart_remove, + .remove = lpuart_remove, .driver = { .name = "fsl-lpuart", .of_match_table = lpuart_dt_ids, diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 90974d338f3c..17f70e4bee43 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -230,6 +230,8 @@ struct imx_port { unsigned int saved_reg[10]; bool context_saved; + bool last_putchar_was_newline; + enum imx_tx_state tx_state; struct hrtimer trigger_start_tx; struct hrtimer trigger_stop_tx; @@ -370,6 +372,7 @@ static void imx_uart_soft_reset(struct imx_port *sport) sport->idle_counter = 0; } +/* called with port.lock taken and irqs off */ static void imx_uart_disable_loopback_rs485(struct imx_port *sport) { unsigned int uts; @@ -470,6 +473,7 @@ static void imx_uart_stop_tx(struct uart_port *port) } } +/* called with port.lock taken and irqs off */ static void imx_uart_stop_rx_with_loopback_ctrl(struct uart_port *port, bool loopback) { struct imx_port *sport = to_imx_port(port); @@ -818,6 +822,8 @@ static irqreturn_t imx_uart_txint(int irq, void *dev_id) * issuing soft reset to the UART (just stop/start of RX does not help). Note * that what we do here is sending isolated start bit about 2.4 times shorter * than it is to be on UART configured baud rate. + * + * Called with port.lock taken and irqs off. */ static void imx_uart_check_flood(struct imx_port *sport, u32 usr2) { @@ -853,6 +859,7 @@ static void imx_uart_check_flood(struct imx_port *sport, u32 usr2) } } +/* called with port.lock taken and irqs off */ static irqreturn_t __imx_uart_rxint(int irq, void *dev_id) { struct imx_port *sport = dev_id; @@ -931,6 +938,7 @@ static void imx_uart_clear_rx_errors(struct imx_port *sport); /* * We have a modem side uart, so the meanings of RTS and CTS are inverted. */ +/* called with port.lock taken and irqs off */ static unsigned int imx_uart_get_hwmctrl(struct imx_port *sport) { unsigned int tmp = TIOCM_DSR; @@ -953,6 +961,8 @@ static unsigned int imx_uart_get_hwmctrl(struct imx_port *sport) /* * Handle any change of modem status signal since we were last called. + * + * Called with port.lock taken and irqs off. */ static void imx_uart_mctrl_check(struct imx_port *sport) { @@ -1292,6 +1302,7 @@ static int imx_uart_start_rx_dma(struct imx_port *sport) return 0; } +/* called with port.lock taken and irqs off */ static void imx_uart_clear_rx_errors(struct imx_port *sport) { struct tty_port *port = &sport->port.state->port; @@ -1422,6 +1433,7 @@ err: return ret; } +/* called with port.lock taken and irqs off */ static void imx_uart_enable_dma(struct imx_port *sport) { u32 ucr1; @@ -2069,26 +2081,34 @@ static void imx_uart_console_putchar(struct uart_port *port, unsigned char ch) barrier(); imx_uart_writel(sport, ch, URTX0); + + sport->last_putchar_was_newline = (ch == '\n'); } -/* - * Interrupts are disabled on entering - */ -static void -imx_uart_console_write(struct console *co, const char *s, unsigned int count) +static void imx_uart_console_device_lock(struct console *co, unsigned long *flags) +{ + struct uart_port *up = &imx_uart_ports[co->index]->port; + + return __uart_port_lock_irqsave(up, flags); +} + +static void imx_uart_console_device_unlock(struct console *co, unsigned long flags) +{ + struct uart_port *up = &imx_uart_ports[co->index]->port; + + return __uart_port_unlock_irqrestore(up, flags); +} + +static void imx_uart_console_write_atomic(struct console *co, + struct nbcon_write_context *wctxt) { struct imx_port *sport = imx_uart_ports[co->index]; + struct uart_port *port = &sport->port; struct imx_port_ucrs old_ucr; - unsigned long flags; unsigned int ucr1, usr2; - int locked = 1; - if (sport->port.sysrq) - locked = 0; - else if (oops_in_progress) - locked = uart_port_trylock_irqsave(&sport->port, &flags); - else - uart_port_lock_irqsave(&sport->port, &flags); + if (!nbcon_enter_unsafe(wctxt)) + return; /* * First, save UCR1/2/3 and then disable interrupts @@ -2102,10 +2122,12 @@ imx_uart_console_write(struct console *co, const char *s, unsigned int count) ucr1 &= ~(UCR1_TRDYEN | UCR1_RRDYEN | UCR1_RTSDEN); imx_uart_writel(sport, ucr1, UCR1); - imx_uart_writel(sport, old_ucr.ucr2 | UCR2_TXEN, UCR2); - uart_console_write(&sport->port, s, count, imx_uart_console_putchar); + if (!sport->last_putchar_was_newline) + uart_console_write(port, "\n", 1, imx_uart_console_putchar); + uart_console_write(port, wctxt->outbuf, wctxt->len, + imx_uart_console_putchar); /* * Finally, wait for transmitter to become empty @@ -2115,8 +2137,73 @@ imx_uart_console_write(struct console *co, const char *s, unsigned int count) 0, USEC_PER_SEC, false, sport, USR2); imx_uart_ucrs_restore(sport, &old_ucr); - if (locked) - uart_port_unlock_irqrestore(&sport->port, flags); + nbcon_exit_unsafe(wctxt); +} + +static void imx_uart_console_write_thread(struct console *co, + struct nbcon_write_context *wctxt) +{ + struct imx_port *sport = imx_uart_ports[co->index]; + struct uart_port *port = &sport->port; + struct imx_port_ucrs old_ucr; + unsigned int ucr1, usr2; + + if (!nbcon_enter_unsafe(wctxt)) + return; + + /* + * First, save UCR1/2/3 and then disable interrupts + */ + imx_uart_ucrs_save(sport, &old_ucr); + ucr1 = old_ucr.ucr1; + + if (imx_uart_is_imx1(sport)) + ucr1 |= IMX1_UCR1_UARTCLKEN; + ucr1 |= UCR1_UARTEN; + ucr1 &= ~(UCR1_TRDYEN | UCR1_RRDYEN | UCR1_RTSDEN); + + imx_uart_writel(sport, ucr1, UCR1); + imx_uart_writel(sport, old_ucr.ucr2 | UCR2_TXEN, UCR2); + + if (nbcon_exit_unsafe(wctxt)) { + int len = READ_ONCE(wctxt->len); + int i; + + /* + * Write out the message. Toggle unsafe for each byte in order + * to give another (higher priority) context the opportunity + * for a friendly takeover. If such a takeover occurs, this + * context must reacquire ownership in order to perform final + * actions (such as re-enabling the interrupts). + * + * IMPORTANT: wctxt->outbuf and wctxt->len are no longer valid + * after a reacquire so writing the message must be + * aborted. + */ + for (i = 0; i < len; i++) { + if (!nbcon_enter_unsafe(wctxt)) + break; + + uart_console_write(port, wctxt->outbuf + i, 1, + imx_uart_console_putchar); + + if (!nbcon_exit_unsafe(wctxt)) + break; + } + } + + while (!nbcon_enter_unsafe(wctxt)) + nbcon_reacquire_nobuf(wctxt); + + /* + * Finally, wait for transmitter to become empty + * and restore UCR1/2/3 + */ + read_poll_timeout(imx_uart_readl, usr2, usr2 & USR2_TXDC, + 0, USEC_PER_SEC, false, sport, USR2); + imx_uart_ucrs_restore(sport, &old_ucr); + + nbcon_exit_unsafe(wctxt); } /* @@ -2208,6 +2295,8 @@ imx_uart_console_setup(struct console *co, char *options) if (retval) goto error_console; + sport->last_putchar_was_newline = true; + if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); else @@ -2244,11 +2333,14 @@ imx_uart_console_exit(struct console *co) static struct uart_driver imx_uart_uart_driver; static struct console imx_uart_console = { .name = DEV_NAME, - .write = imx_uart_console_write, + .write_atomic = imx_uart_console_write_atomic, + .write_thread = imx_uart_console_write_thread, + .device_lock = imx_uart_console_device_lock, + .device_unlock = imx_uart_console_device_unlock, + .flags = CON_PRINTBUFFER | CON_NBCON, .device = uart_console_device, .setup = imx_uart_console_setup, .exit = imx_uart_console_exit, - .flags = CON_PRINTBUFFER, .index = -1, .data = &imx_uart_uart_driver, }; @@ -2595,10 +2687,13 @@ static void imx_uart_save_context(struct imx_port *sport) uart_port_unlock_irqrestore(&sport->port, flags); } +/* called with irq off */ static void imx_uart_enable_wakeup(struct imx_port *sport, bool on) { u32 ucr3; + uart_port_lock(&sport->port); + ucr3 = imx_uart_readl(sport, UCR3); if (on) { imx_uart_writel(sport, USR1_AWAKE, USR1); @@ -2618,6 +2713,8 @@ static void imx_uart_enable_wakeup(struct imx_port *sport, bool on) } imx_uart_writel(sport, ucr1, UCR1); } + + uart_port_unlock(&sport->port); } static int imx_uart_suspend_noirq(struct device *dev) @@ -2717,7 +2814,7 @@ static const struct dev_pm_ops imx_uart_pm_ops = { static struct platform_driver imx_uart_platform_driver = { .probe = imx_uart_probe, - .remove_new = imx_uart_remove, + .remove = imx_uart_remove, .driver = { .name = "imx-uart", diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c index a0731773ce75..58a3ab030d67 100644 --- a/drivers/tty/serial/lantiq.c +++ b/drivers/tty/serial/lantiq.c @@ -915,7 +915,7 @@ MODULE_DEVICE_TABLE(of, ltq_asc_match); static struct platform_driver lqasc_driver = { .probe = lqasc_probe, - .remove_new = lqasc_remove, + .remove = lqasc_remove, .driver = { .name = DRVNAME, .of_match_table = ltq_asc_match, diff --git a/drivers/tty/serial/liteuart.c b/drivers/tty/serial/liteuart.c index 3ce369f76349..6c13cf1ab646 100644 --- a/drivers/tty/serial/liteuart.c +++ b/drivers/tty/serial/liteuart.c @@ -353,7 +353,7 @@ MODULE_DEVICE_TABLE(of, liteuart_of_match); static struct platform_driver liteuart_platform_driver = { .probe = liteuart_probe, - .remove_new = liteuart_remove, + .remove = liteuart_remove, .driver = { .name = KBUILD_MODNAME, .of_match_table = liteuart_of_match, diff --git a/drivers/tty/serial/lpc32xx_hs.c b/drivers/tty/serial/lpc32xx_hs.c index 3e4ac46de1bc..42c5f9bc18b7 100644 --- a/drivers/tty/serial/lpc32xx_hs.c +++ b/drivers/tty/serial/lpc32xx_hs.c @@ -695,7 +695,7 @@ MODULE_DEVICE_TABLE(of, serial_hs_lpc32xx_dt_ids); static struct platform_driver serial_hs_lpc32xx_driver = { .probe = serial_hs_lpc32xx_probe, - .remove_new = serial_hs_lpc32xx_remove, + .remove = serial_hs_lpc32xx_remove, .suspend = serial_hs_lpc32xx_suspend, .resume = serial_hs_lpc32xx_resume, .driver = { diff --git a/drivers/tty/serial/ma35d1_serial.c b/drivers/tty/serial/ma35d1_serial.c index 3b4206e815fe..8dcad52eedfd 100644 --- a/drivers/tty/serial/ma35d1_serial.c +++ b/drivers/tty/serial/ma35d1_serial.c @@ -794,7 +794,7 @@ static int ma35d1serial_resume(struct platform_device *dev) static struct platform_driver ma35d1serial_driver = { .probe = ma35d1serial_probe, - .remove_new = ma35d1serial_remove, + .remove = ma35d1serial_remove, .suspend = ma35d1serial_suspend, .resume = ma35d1serial_resume, .driver = { diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c index 58858dd352c5..93e7dda4d39a 100644 --- a/drivers/tty/serial/mcf.c +++ b/drivers/tty/serial/mcf.c @@ -616,7 +616,7 @@ static void mcf_remove(struct platform_device *pdev) static struct platform_driver mcf_platform_driver = { .probe = mcf_probe, - .remove_new = mcf_remove, + .remove = mcf_remove, .driver = { .name = "mcfuart", }, diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c index 8eb586ac3b0d..a6cb2a535f9d 100644 --- a/drivers/tty/serial/meson_uart.c +++ b/drivers/tty/serial/meson_uart.c @@ -842,7 +842,7 @@ MODULE_DEVICE_TABLE(of, meson_uart_dt_match); static struct platform_driver meson_uart_platform_driver = { .probe = meson_uart_probe, - .remove_new = meson_uart_remove, + .remove = meson_uart_remove, .driver = { .name = "meson_uart", .of_match_table = meson_uart_dt_match, diff --git a/drivers/tty/serial/milbeaut_usio.c b/drivers/tty/serial/milbeaut_usio.c index fb082ee73d5b..059bea18dbab 100644 --- a/drivers/tty/serial/milbeaut_usio.c +++ b/drivers/tty/serial/milbeaut_usio.c @@ -570,7 +570,7 @@ MODULE_DEVICE_TABLE(of, mlb_usio_dt_ids); static struct platform_driver mlb_usio_driver = { .probe = mlb_usio_probe, - .remove_new = mlb_usio_remove, + .remove = mlb_usio_remove, .driver = { .name = USIO_NAME, .of_match_table = mlb_usio_dt_ids, diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c index 95dae5e27b28..f55aa353aed9 100644 --- a/drivers/tty/serial/mpc52xx_uart.c +++ b/drivers/tty/serial/mpc52xx_uart.c @@ -1843,7 +1843,7 @@ MODULE_DEVICE_TABLE(of, mpc52xx_uart_of_match); static struct platform_driver mpc52xx_uart_of_driver = { .probe = mpc52xx_uart_of_probe, - .remove_new = mpc52xx_uart_of_remove, + .remove = mpc52xx_uart_of_remove, #ifdef CONFIG_PM .suspend = mpc52xx_uart_of_suspend, .resume = mpc52xx_uart_of_resume, diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c index 0a9c5219df88..1b137e068444 100644 --- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -1894,7 +1894,7 @@ static const struct dev_pm_ops msm_serial_dev_pm_ops = { }; static struct platform_driver msm_platform_driver = { - .remove_new = msm_serial_remove, + .remove = msm_serial_remove, .probe = msm_serial_probe, .driver = { .name = "msm_serial", diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index a1c76565c399..cc65c9fb6446 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -1704,7 +1704,7 @@ static void mxs_auart_remove(struct platform_device *pdev) static struct platform_driver mxs_auart_driver = { .probe = mxs_auart_probe, - .remove_new = mxs_auart_remove, + .remove = mxs_auart_remove, .driver = { .name = "mxs-auart", .of_match_table = mxs_auart_dt_ids, diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index d7e172eeaab1..0b85f47ff19e 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1802,7 +1802,7 @@ MODULE_DEVICE_TABLE(of, omap_serial_of_match); static struct platform_driver serial_omap_driver = { .probe = serial_omap_probe, - .remove_new = serial_omap_remove, + .remove = serial_omap_remove, .driver = { .name = OMAP_SERIAL_DRIVER_NAME, .pm = &serial_omap_dev_pm_ops, diff --git a/drivers/tty/serial/owl-uart.c b/drivers/tty/serial/owl-uart.c index ecec483d4d59..0542882cfbbe 100644 --- a/drivers/tty/serial/owl-uart.c +++ b/drivers/tty/serial/owl-uart.c @@ -730,7 +730,7 @@ static void owl_uart_remove(struct platform_device *pdev) static struct platform_driver owl_uart_platform_driver = { .probe = owl_uart_probe, - .remove_new = owl_uart_remove, + .remove = owl_uart_remove, .driver = { .name = "owl-uart", .of_match_table = owl_uart_dt_matches, diff --git a/drivers/tty/serial/pic32_uart.c b/drivers/tty/serial/pic32_uart.c index 261c8115a700..14d50bd7f1bd 100644 --- a/drivers/tty/serial/pic32_uart.c +++ b/drivers/tty/serial/pic32_uart.c @@ -956,7 +956,7 @@ MODULE_DEVICE_TABLE(of, pic32_serial_dt_ids); static struct platform_driver pic32_uart_platform_driver = { .probe = pic32_uart_probe, - .remove_new = pic32_uart_remove, + .remove = pic32_uart_remove, .driver = { .name = PIC32_DEV_NAME, .of_match_table = of_match_ptr(pic32_serial_dt_ids), diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c index 8969b11cc0a9..e3a919328695 100644 --- a/drivers/tty/serial/pmac_zilog.c +++ b/drivers/tty/serial/pmac_zilog.c @@ -1776,7 +1776,7 @@ static struct macio_driver pmz_driver = { static struct platform_driver pmz_driver = { .probe = pmz_attach, - .remove_new = pmz_detach, + .remove = pmz_detach, .driver = { .name = "scc", }, diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 5dfe4e599ad6..a80ce7aaf309 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -1839,7 +1839,7 @@ static const struct of_device_id qcom_geni_serial_match_table[] = { MODULE_DEVICE_TABLE(of, qcom_geni_serial_match_table); static struct platform_driver qcom_geni_serial_platform_driver = { - .remove_new = qcom_geni_serial_remove, + .remove = qcom_geni_serial_remove, .probe = qcom_geni_serial_probe, .driver = { .name = "qcom_geni_serial", diff --git a/drivers/tty/serial/rda-uart.c b/drivers/tty/serial/rda-uart.c index 663e35e424bd..87fa30d68687 100644 --- a/drivers/tty/serial/rda-uart.c +++ b/drivers/tty/serial/rda-uart.c @@ -777,7 +777,7 @@ static void rda_uart_remove(struct platform_device *pdev) static struct platform_driver rda_uart_platform_driver = { .probe = rda_uart_probe, - .remove_new = rda_uart_remove, + .remove = rda_uart_remove, .driver = { .name = "rda-uart", .of_match_table = rda_uart_dt_matches, diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c index 79c794fa6545..3c34027687d2 100644 --- a/drivers/tty/serial/sa1100.c +++ b/drivers/tty/serial/sa1100.c @@ -880,7 +880,7 @@ static void sa1100_serial_remove(struct platform_device *pdev) static struct platform_driver sa11x0_serial_driver = { .probe = sa1100_serial_probe, - .remove_new = sa1100_serial_remove, + .remove = sa1100_serial_remove, .suspend = sa1100_serial_suspend, .resume = sa1100_serial_resume, .driver = { diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c index 0d184ee2f9ce..210fff7164c1 100644 --- a/drivers/tty/serial/samsung_tty.c +++ b/drivers/tty/serial/samsung_tty.c @@ -2498,6 +2498,12 @@ static const struct s3c24xx_serial_drv_data exynos850_serial_drv_data = { .fifosize = { 256, 64, 64, 64 }, }; +static const struct s3c24xx_serial_drv_data exynos8895_serial_drv_data = { + EXYNOS_COMMON_SERIAL_DRV_DATA, + /* samsung,uart-fifosize must be specified in the device tree. */ + .fifosize = { 0 }, +}; + static const struct s3c24xx_serial_drv_data gs101_serial_drv_data = { .info = { .name = "Google GS101 UART", @@ -2528,12 +2534,14 @@ static const struct s3c24xx_serial_drv_data gs101_serial_drv_data = { #define EXYNOS4210_SERIAL_DRV_DATA (&exynos4210_serial_drv_data) #define EXYNOS5433_SERIAL_DRV_DATA (&exynos5433_serial_drv_data) #define EXYNOS850_SERIAL_DRV_DATA (&exynos850_serial_drv_data) +#define EXYNOS8895_SERIAL_DRV_DATA (&exynos8895_serial_drv_data) #define GS101_SERIAL_DRV_DATA (&gs101_serial_drv_data) #else #define EXYNOS4210_SERIAL_DRV_DATA NULL #define EXYNOS5433_SERIAL_DRV_DATA NULL #define EXYNOS850_SERIAL_DRV_DATA NULL +#define EXYNOS8895_SERIAL_DRV_DATA NULL #define GS101_SERIAL_DRV_DATA NULL #endif @@ -2623,6 +2631,9 @@ static const struct platform_device_id s3c24xx_serial_driver_ids[] = { }, { .name = "gs101-uart", .driver_data = (kernel_ulong_t)GS101_SERIAL_DRV_DATA, + }, { + .name = "exynos8895-uart", + .driver_data = (kernel_ulong_t)EXYNOS8895_SERIAL_DRV_DATA, }, { }, }; @@ -2646,6 +2657,8 @@ static const struct of_device_id s3c24xx_uart_dt_match[] = { .data = ARTPEC8_SERIAL_DRV_DATA }, { .compatible = "google,gs101-uart", .data = GS101_SERIAL_DRV_DATA }, + { .compatible = "samsung,exynos8895-uart", + .data = EXYNOS8895_SERIAL_DRV_DATA }, {}, }; MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match); @@ -2653,7 +2666,7 @@ MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match); static struct platform_driver samsung_serial_driver = { .probe = s3c24xx_serial_probe, - .remove_new = s3c24xx_serial_remove, + .remove = s3c24xx_serial_remove, .id_table = s3c24xx_serial_driver_ids, .driver = { .name = "samsung-uart", diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index ad88a33a504f..9d0c971e49f5 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -1473,7 +1473,7 @@ static int sc16is7xx_setup_mctrl_ports(struct sc16is7xx_port *s, } static const struct serial_rs485 sc16is7xx_rs485_supported = { - .flags = SER_RS485_ENABLED | SER_RS485_RTS_AFTER_SEND, + .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND, .delay_rts_before_send = 1, .delay_rts_after_send = 1, /* Not supported but keep returning -EINVAL */ }; diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c index 6d1d142fd216..4c851dae6624 100644 --- a/drivers/tty/serial/sccnxp.c +++ b/drivers/tty/serial/sccnxp.c @@ -1052,7 +1052,7 @@ static struct platform_driver sccnxp_uart_driver = { .name = SCCNXP_NAME, }, .probe = sccnxp_probe, - .remove_new = sccnxp_remove, + .remove = sccnxp_remove, .id_table = sccnxp_id_table, }; module_platform_driver(sccnxp_uart_driver); diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c index 1183ca54ab92..8004fc00fb9c 100644 --- a/drivers/tty/serial/serial-tegra.c +++ b/drivers/tty/serial/serial-tegra.c @@ -1648,7 +1648,7 @@ static const struct dev_pm_ops tegra_uart_pm_ops = { static struct platform_driver tegra_uart_platform_driver = { .probe = tegra_uart_probe, - .remove_new = tegra_uart_remove, + .remove = tegra_uart_remove, .driver = { .name = "serial-tegra", .of_match_table = tegra_uart_of_match, diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c index abba39722958..436a559234df 100644 --- a/drivers/tty/serial/serial_txx9.c +++ b/drivers/tty/serial/serial_txx9.c @@ -1097,7 +1097,7 @@ static int serial_txx9_resume(struct platform_device *dev) static struct platform_driver serial_txx9_plat_driver = { .probe = serial_txx9_probe, - .remove_new = serial_txx9_remove, + .remove = serial_txx9_remove, #ifdef CONFIG_PM .suspend = serial_txx9_suspend, .resume = serial_txx9_resume, diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index b80e9a528e17..df523c744423 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -3505,7 +3505,7 @@ static SIMPLE_DEV_PM_OPS(sci_dev_pm_ops, sci_suspend, sci_resume); static struct platform_driver sci_driver = { .probe = sci_probe, - .remove_new = sci_remove, + .remove = sci_remove, .driver = { .name = "sh-sci", .pm = &sci_dev_pm_ops, diff --git a/drivers/tty/serial/sifive.c b/drivers/tty/serial/sifive.c index cbfce65c9d22..5904a2d4cefa 100644 --- a/drivers/tty/serial/sifive.c +++ b/drivers/tty/serial/sifive.c @@ -1040,7 +1040,7 @@ MODULE_DEVICE_TABLE(of, sifive_serial_of_match); static struct platform_driver sifive_serial_platform_driver = { .probe = sifive_serial_probe, - .remove_new = sifive_serial_remove, + .remove = sifive_serial_remove, .driver = { .name = SIFIVE_SERIAL_NAME, .pm = pm_sleep_ptr(&sifive_uart_pm_ops), diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c index 3fc54cc02a1f..8c9366321f8e 100644 --- a/drivers/tty/serial/sprd_serial.c +++ b/drivers/tty/serial/sprd_serial.c @@ -53,10 +53,12 @@ #define SPRD_IEN_TX_EMPTY BIT(1) #define SPRD_IEN_BREAK_DETECT BIT(7) #define SPRD_IEN_TIMEOUT BIT(13) +#define SPRD_IEN_DATA_TIMEOUT BIT(17) /* interrupt clear register */ #define SPRD_ICLR 0x0014 #define SPRD_ICLR_TIMEOUT BIT(13) +#define SPRD_ICLR_DATA_TIMEOUT BIT(17) /* line control register */ #define SPRD_LCR 0x0018 @@ -102,6 +104,7 @@ #define SPRD_IMSR_TX_FIFO_EMPTY BIT(1) #define SPRD_IMSR_BREAK_DETECT BIT(7) #define SPRD_IMSR_TIMEOUT BIT(13) +#define SPRD_IMSR_DATA_TIMEOUT BIT(17) #define SPRD_DEFAULT_SOURCE_CLK 26000000 #define SPRD_RX_DMA_STEP 1 @@ -118,6 +121,12 @@ struct sprd_uart_dma { bool enable; }; +struct sprd_uart_data { + unsigned int timeout_ien; + unsigned int timeout_iclr; + unsigned int timeout_imsr; +}; + struct sprd_uart_port { struct uart_port port; char name[16]; @@ -126,6 +135,7 @@ struct sprd_uart_port { struct sprd_uart_dma rx_dma; dma_addr_t pos; unsigned char *rx_buf_tail; + const struct sprd_uart_data *pdata; }; static struct sprd_uart_port *sprd_port[UART_NR_MAX]; @@ -134,6 +144,18 @@ static int sprd_ports_num; static int sprd_start_dma_rx(struct uart_port *port); static int sprd_tx_dma_config(struct uart_port *port); +static const struct sprd_uart_data sc9836_data = { + .timeout_ien = SPRD_IEN_TIMEOUT, + .timeout_iclr = SPRD_ICLR_TIMEOUT, + .timeout_imsr = SPRD_IMSR_TIMEOUT, +}; + +static const struct sprd_uart_data sc9632_data = { + .timeout_ien = SPRD_IEN_DATA_TIMEOUT, + .timeout_iclr = SPRD_ICLR_DATA_TIMEOUT, + .timeout_imsr = SPRD_IMSR_DATA_TIMEOUT, +}; + static inline unsigned int serial_in(struct uart_port *port, unsigned int offset) { @@ -637,6 +659,8 @@ static irqreturn_t sprd_handle_irq(int irq, void *dev_id) { struct uart_port *port = dev_id; unsigned int ims; + struct sprd_uart_port *sp = + container_of(port, struct sprd_uart_port, port); uart_port_lock(port); @@ -647,14 +671,14 @@ static irqreturn_t sprd_handle_irq(int irq, void *dev_id) return IRQ_NONE; } - if (ims & SPRD_IMSR_TIMEOUT) - serial_out(port, SPRD_ICLR, SPRD_ICLR_TIMEOUT); + if (ims & sp->pdata->timeout_imsr) + serial_out(port, SPRD_ICLR, sp->pdata->timeout_iclr); if (ims & SPRD_IMSR_BREAK_DETECT) serial_out(port, SPRD_ICLR, SPRD_IMSR_BREAK_DETECT); if (ims & (SPRD_IMSR_RX_FIFO_FULL | SPRD_IMSR_BREAK_DETECT | - SPRD_IMSR_TIMEOUT)) + sp->pdata->timeout_imsr)) sprd_rx(port); if (ims & SPRD_IMSR_TX_FIFO_EMPTY) @@ -729,7 +753,7 @@ static int sprd_startup(struct uart_port *port) /* enable interrupt */ uart_port_lock_irqsave(port, &flags); ien = serial_in(port, SPRD_IEN); - ien |= SPRD_IEN_BREAK_DETECT | SPRD_IEN_TIMEOUT; + ien |= SPRD_IEN_BREAK_DETECT | sp->pdata->timeout_ien; if (!sp->rx_dma.enable) ien |= SPRD_IEN_RX_FULL; serial_out(port, SPRD_IEN, ien); @@ -1184,6 +1208,12 @@ static int sprd_probe(struct platform_device *pdev) up->mapbase = res->start; + sport->pdata = of_device_get_match_data(&pdev->dev); + if (!sport->pdata) { + dev_err(&pdev->dev, "get match data failed!\n"); + return -EINVAL; + } + irq = platform_get_irq(pdev, 0); if (irq < 0) return irq; @@ -1248,14 +1278,15 @@ static int sprd_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(sprd_pm_ops, sprd_suspend, sprd_resume); static const struct of_device_id serial_ids[] = { - {.compatible = "sprd,sc9836-uart",}, + {.compatible = "sprd,sc9836-uart", .data = &sc9836_data}, + {.compatible = "sprd,sc9632-uart", .data = &sc9632_data}, {} }; MODULE_DEVICE_TABLE(of, serial_ids); static struct platform_driver sprd_platform_driver = { .probe = sprd_probe, - .remove_new = sprd_remove, + .remove = sprd_remove, .driver = { .name = "sprd_serial", .of_match_table = serial_ids, diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c index 8aea59f8ca13..6ed9a327702b 100644 --- a/drivers/tty/serial/st-asc.c +++ b/drivers/tty/serial/st-asc.c @@ -934,7 +934,7 @@ static DEFINE_SIMPLE_DEV_PM_OPS(asc_serial_pm_ops, asc_serial_suspend, static struct platform_driver asc_serial_driver = { .probe = asc_serial_probe, - .remove_new = asc_serial_remove, + .remove = asc_serial_remove, .driver = { .name = DRIVER_NAME, .pm = pm_sleep_ptr(&asc_serial_pm_ops), diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index e1e7bc04c579..7dc254546075 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -2188,7 +2188,7 @@ static const struct dev_pm_ops stm32_serial_pm_ops = { static struct platform_driver stm32_serial_driver = { .probe = stm32_usart_serial_probe, - .remove_new = stm32_usart_serial_remove, + .remove = stm32_usart_serial_remove, .driver = { .name = DRIVER_NAME, .pm = &stm32_serial_pm_ops, diff --git a/drivers/tty/serial/sunhv.c b/drivers/tty/serial/sunhv.c index 7f60679fdde1..2b3ec65d595d 100644 --- a/drivers/tty/serial/sunhv.c +++ b/drivers/tty/serial/sunhv.c @@ -633,7 +633,7 @@ static struct platform_driver hv_driver = { .of_match_table = hv_match, }, .probe = hv_probe, - .remove_new = hv_remove, + .remove = hv_remove, }; static int __init sunhv_init(void) diff --git a/drivers/tty/serial/sunplus-uart.c b/drivers/tty/serial/sunplus-uart.c index abf7c449308d..38deee571b0d 100644 --- a/drivers/tty/serial/sunplus-uart.c +++ b/drivers/tty/serial/sunplus-uart.c @@ -697,7 +697,7 @@ MODULE_DEVICE_TABLE(of, sp_uart_of_match); static struct platform_driver sunplus_uart_platform_driver = { .probe = sunplus_uart_probe, - .remove_new = sunplus_uart_remove, + .remove = sunplus_uart_remove, .driver = { .name = "sunplus_uart", .of_match_table = sp_uart_of_match, diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c index 1acbe2fba746..df906ccf2e8a 100644 --- a/drivers/tty/serial/sunsab.c +++ b/drivers/tty/serial/sunsab.c @@ -1100,7 +1100,7 @@ static struct platform_driver sab_driver = { .of_match_table = sab_match, }, .probe = sab_probe, - .remove_new = sab_remove, + .remove = sab_remove, }; static int __init sunsab_init(void) diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c index 0f463da5e7ce..7f0fef07e141 100644 --- a/drivers/tty/serial/sunsu.c +++ b/drivers/tty/serial/sunsu.c @@ -1549,7 +1549,7 @@ static struct platform_driver su_driver = { .of_match_table = su_match, }, .probe = su_probe, - .remove_new = su_remove, + .remove = su_remove, }; static int __init sunsu_init(void) diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c index 71758ad4241c..0551c24c06f5 100644 --- a/drivers/tty/serial/sunzilog.c +++ b/drivers/tty/serial/sunzilog.c @@ -1538,7 +1538,7 @@ static struct platform_driver zs_driver = { .of_match_table = zs_match, }, .probe = zs_probe, - .remove_new = zs_remove, + .remove = zs_remove, }; static int __init sunzilog_init(void) diff --git a/drivers/tty/serial/tegra-tcu.c b/drivers/tty/serial/tegra-tcu.c index 21ca5fcadf49..7033dbfe8ba1 100644 --- a/drivers/tty/serial/tegra-tcu.c +++ b/drivers/tty/serial/tegra-tcu.c @@ -293,7 +293,7 @@ static struct platform_driver tegra_tcu_driver = { .of_match_table = tegra_tcu_match, }, .probe = tegra_tcu_probe, - .remove_new = tegra_tcu_remove, + .remove = tegra_tcu_remove, }; module_platform_driver(tegra_tcu_driver); diff --git a/drivers/tty/serial/timbuart.c b/drivers/tty/serial/timbuart.c index 43fa0938b5e3..6fa93c3872a7 100644 --- a/drivers/tty/serial/timbuart.c +++ b/drivers/tty/serial/timbuart.c @@ -485,7 +485,7 @@ static struct platform_driver timbuart_platform_driver = { .name = "timb-uart", }, .probe = timbuart_probe, - .remove_new = timbuart_remove, + .remove = timbuart_remove, }; module_platform_driver(timbuart_platform_driver); diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c index 68357ac8ffe3..a41e7fc373b7 100644 --- a/drivers/tty/serial/uartlite.c +++ b/drivers/tty/serial/uartlite.c @@ -915,7 +915,7 @@ MODULE_ALIAS("platform:uartlite"); static struct platform_driver ulite_platform_driver = { .probe = ulite_probe, - .remove_new = ulite_remove, + .remove = ulite_remove, .driver = { .name = "uartlite", .of_match_table = of_match_ptr(ulite_of_match), diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c index 4eed909468ff..0613f8c11ab1 100644 --- a/drivers/tty/serial/ucc_uart.c +++ b/drivers/tty/serial/ucc_uart.c @@ -1484,7 +1484,7 @@ static struct platform_driver ucc_uart_of_driver = { .of_match_table = ucc_uart_match, }, .probe = ucc_uart_probe, - .remove_new = ucc_uart_remove, + .remove = ucc_uart_remove, }; static int __init ucc_uart_init(void) diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index 777392914819..beb151be4d32 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -1903,7 +1903,7 @@ static void cdns_uart_remove(struct platform_device *pdev) static struct platform_driver cdns_uart_platform_driver = { .probe = cdns_uart_probe, - .remove_new = cdns_uart_remove, + .remove = cdns_uart_remove, .driver = { .name = CDNS_UART_NAME, .of_match_table = cdns_uart_of_match, diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 9771072da177..dcb1769c3625 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -3631,7 +3631,7 @@ static struct ctl_table tty_table[] = { .data = &tty_ldisc_autoload, .maxlen = sizeof(tty_ldisc_autoload), .mode = 0644, - .proc_handler = proc_dointvec, + .proc_handler = proc_dointvec_minmax, .extra1 = SYSCTL_ZERO, .extra2 = SYSCTL_ONE, }, diff --git a/include/linux/eeprom_93cx6.h b/include/linux/eeprom_93cx6.h index c860c72a921d..3a485cc0e0fa 100644 --- a/include/linux/eeprom_93cx6.h +++ b/include/linux/eeprom_93cx6.h @@ -11,6 +11,8 @@ Supported chipsets: 93c46, 93c56 and 93c66. */ +#include <linux/bits.h> + /* * EEPROM operation defines. */ @@ -34,6 +36,7 @@ * @register_write(struct eeprom_93cx6 *eeprom): handler to * write to the eeprom register by using all reg_* fields. * @width: eeprom width, should be one of the PCI_EEPROM_WIDTH_* defines + * @quirks: eeprom or controller quirks * @drive_data: Set if we're driving the data line. * @reg_data_in: register field to indicate data input * @reg_data_out: register field to indicate data output @@ -50,6 +53,9 @@ struct eeprom_93cx6 { void (*register_write)(struct eeprom_93cx6 *eeprom); int width; + unsigned int quirks; +/* Some EEPROMs require an extra clock cycle before reading */ +#define PCI_EEPROM_QUIRK_EXTRA_READ_CYCLE BIT(0) char drive_data; char reg_data_in; @@ -71,3 +77,8 @@ extern void eeprom_93cx6_wren(struct eeprom_93cx6 *eeprom, bool enable); extern void eeprom_93cx6_write(struct eeprom_93cx6 *eeprom, u8 addr, u16 data); + +static inline bool has_quirk_extra_read_cycle(struct eeprom_93cx6 *eeprom) +{ + return eeprom->quirks & PCI_EEPROM_QUIRK_EXTRA_READ_CYCLE; +} diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h index 564868bdce89..fd743d4c4b4b 100644 --- a/include/linux/kfifo.h +++ b/include/linux/kfifo.h @@ -37,7 +37,6 @@ */ #include <linux/array_size.h> -#include <linux/dma-mapping.h> #include <linux/spinlock.h> #include <linux/stddef.h> #include <linux/types.h> diff --git a/include/linux/platform_data/sa11x0-serial.h b/include/linux/platform_data/sa11x0-serial.h index 8b79ab08af45..a88096bc74e4 100644 --- a/include/linux/platform_data/sa11x0-serial.h +++ b/include/linux/platform_data/sa11x0-serial.h @@ -10,7 +10,6 @@ #define SA11X0_SERIAL_H struct uart_port; -struct uart_info; /* * This is a temporary structure for registering these diff --git a/samples/kfifo/dma-example.c b/samples/kfifo/dma-example.c index 48df719dac8c..8076ac410161 100644 --- a/samples/kfifo/dma-example.c +++ b/samples/kfifo/dma-example.c @@ -9,6 +9,7 @@ #include <linux/kfifo.h> #include <linux/module.h> #include <linux/scatterlist.h> +#include <linux/dma-mapping.h> /* * This module shows how to handle fifo dma operations. |