Merge tag 'tty-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty / serial driver updates from Greg KH:
 "Here is a small set of tty and serial driver updates for 6.13-rc1.
  Nothing major at all this time, only some small changes:

   - few device tree binding updates

   - 8250_exar serial driver updates

   - imx serial driver updates

   - sprd_serial driver updates

   - other tiny serial driver updates, full details in the shortlog

  All of these have been in linux-next for a while with one reported
  issue, but that commit has now been reverted"

* tag 'tty-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (37 commits)
  Revert "serial: sh-sci: Clean sci_ports[0] after at earlycon exit"
  serial: amba-pl011: fix build regression
  dt-bindings: serial: Add a new compatible string for ums9632
  serial: sprd: Add support for sc9632
  tty/serial/altera_uart: unwrap error log string
  tty/serial/altera_jtaguart: unwrap error log string
  serial: amba-pl011: Fix RX stall when DMA is used
  tty: ldsic: fix tty_ldisc_autoload sysctl's proc_handler
  serial: 8250_fintek: Add support for F81216E
  serial: sh-sci: Clean sci_ports[0] after at earlycon exit
  tty: atmel_serial: Fix typo retreives to retrieves
  tty: atmel_serial: Use devm_platform_ioremap_resource()
  serial: 8250: omap: Move pm_runtime_get_sync
  tty: serial: samsung: Add Exynos8895 compatible
  dt-bindings: serial: samsung: Add samsung,exynos8895-uart compatible
  serial: 8250_dw: Add Sophgo SG2044 quirk
  dt-bindings: serial: snps-dw-apb-uart: Add Sophgo SG2044 uarts
  dt-bindings: serial: snps,dw-apb-uart: merge duplicate compatible entry.
  altera_jtaguart: Use dev_err() to report error attaching IRQ
  altera_uart: Use dev_err() to report error attaching IRQ handler
  ...

81 files changed, 381 insertions, 241 deletions

diff --git a/Documentation/devicetree/bindings/serial/rs485.yaml b/Documentation/devicetree/bindings/serial/rs485.yaml
index 9418fd66a8e9..b93254ad2a28 100644
--- a/Documentation/devicetree/bindings/serial/rs485.yaml
+++ b/Documentation/devicetree/bindings/serial/rs485.yaml
@@ -18,16 +18,15 @@ properties:
     description: prop-encoded-array <a b>
     $ref: /schemas/types.yaml#/definitions/uint32-array
     items:
-      items:
-        - description: Delay between rts signal and beginning of data sent in
-            milliseconds. It corresponds to the delay before sending data.
-          default: 0
-          maximum: 100
-        - description: Delay between end of data sent and rts signal in milliseconds.
-            It corresponds to the delay after sending data and actual release
-            of the line.
-          default: 0
-          maximum: 100
+      - description: Delay between rts signal and beginning of data sent in
+          milliseconds. It corresponds to the delay before sending data.
+        default: 0
+        maximum: 100
+      - description: Delay between end of data sent and rts signal in milliseconds.
+          It corresponds to the delay after sending data and actual release
+          of the line.
+        default: 0
+        maximum: 100
 
   rs485-rts-active-high:
     description: drive RTS high when sending (this is the default).
diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
index 788c80e47831..070eba9f19d3 100644
--- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml
+++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
@@ -27,6 +27,7 @@ properties:
           - samsung,exynos4210-uart
           - samsung,exynos5433-uart
           - samsung,exynos850-uart
+          - samsung,exynos8895-uart
       - items:
           - enum:
               - samsung,exynos7-uart
@@ -160,18 +161,27 @@ allOf:
           contains:
             enum:
               - google,gs101-uart
+              - samsung,exynos8895-uart
     then:
       required:
         - samsung,uart-fifosize
       properties:
-        reg-io-width: false
-
         clocks:
           maxItems: 2
 
         clock-names:
           maxItems: 2
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - google,gs101-uart
+    then:
+      properties:
+        reg-io-width: false
+
 unevaluatedProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
index 4cdb0dcaccf3..1c163cb5dff1 100644
--- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
@@ -37,6 +37,8 @@ properties:
           - const: renesas,rzn1-uart
       - items:
           - enum:
+              - brcm,bcm11351-dw-apb-uart
+              - brcm,bcm21664-dw-apb-uart
               - rockchip,px30-uart
               - rockchip,rk1808-uart
               - rockchip,rk3036-uart
@@ -48,18 +50,13 @@ properties:
               - rockchip,rk3328-uart
               - rockchip,rk3368-uart
               - rockchip,rk3399-uart
+              - rockchip,rk3528-uart
               - rockchip,rk3568-uart
+              - rockchip,rk3576-uart
               - rockchip,rk3588-uart
               - rockchip,rv1108-uart
               - rockchip,rv1126-uart
-          - const: snps,dw-apb-uart
-      - items:
-          - enum:
-              - brcm,bcm11351-dw-apb-uart
-              - brcm,bcm21664-dw-apb-uart
-          - const: snps,dw-apb-uart
-      - items:
-          - enum:
+              - sophgo,sg2044-uart
               - starfive,jh7100-hsuart
               - starfive,jh7100-uart
               - starfive,jh7110-uart
diff --git a/Documentation/devicetree/bindings/serial/sprd-uart.yaml b/Documentation/devicetree/bindings/serial/sprd-uart.yaml
index f4dbb6dc2b6e..a2a5056eba04 100644
--- a/Documentation/devicetree/bindings/serial/sprd-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/sprd-uart.yaml
@@ -17,6 +17,7 @@ properties:
     oneOf:
       - items:
           - enum:
+              - sprd,sc9632-uart
               - sprd,sc9860-uart
               - sprd,sc9863a-uart
               - sprd,ums512-uart
diff --git a/drivers/mailbox/omap-mailbox.c b/drivers/mailbox/omap-mailbox.c
index 6797770474a5..680243751d62 100644
--- a/drivers/mailbox/omap-mailbox.c
+++ b/drivers/mailbox/omap-mailbox.c
@@ -15,6 +15,7 @@
 #include <linux/slab.h>
 #include <linux/kfifo.h>
 #include <linux/err.h>
+#include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
diff --git a/drivers/misc/eeprom/eeprom_93cx6.c b/drivers/misc/eeprom/eeprom_93cx6.c
index 9627294fe3e9..e6f0e0fc1ca2 100644
--- a/drivers/misc/eeprom/eeprom_93cx6.c
+++ b/drivers/misc/eeprom/eeprom_93cx6.c
@@ -8,6 +8,7 @@
  * Supported chipsets: 93c46 & 93c66.
  */
 
+#include <linux/bits.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/delay.h>
@@ -102,7 +103,7 @@ static void eeprom_93cx6_write_bits(struct eeprom_93cx6 *eeprom,
 		/*
 		 * Check if this bit needs to be set.
 		 */
-		eeprom->reg_data_in = !!(data & (1 << (i - 1)));
+		eeprom->reg_data_in = !!(data & BIT(i - 1));
 
 		/*
 		 * Write the bit to the eeprom register.
@@ -152,7 +153,7 @@ static void eeprom_93cx6_read_bits(struct eeprom_93cx6 *eeprom,
 		 * Read if the bit has been set.
 		 */
 		if (eeprom->reg_data_out)
-			buf |= (1 << (i - 1));
+			buf |= BIT(i - 1);
 
 		eeprom_93cx6_pulse_low(eeprom);
 	}
@@ -186,6 +187,11 @@ void eeprom_93cx6_read(struct eeprom_93cx6 *eeprom, const u8 word,
 	eeprom_93cx6_write_bits(eeprom, command,
 		PCI_EEPROM_WIDTH_OPCODE + eeprom->width);
 
+	if (has_quirk_extra_read_cycle(eeprom)) {
+		eeprom_93cx6_pulse_high(eeprom);
+		eeprom_93cx6_pulse_low(eeprom);
+	}
+
 	/*
 	 * Read the requested 16 bits.
 	 */
@@ -252,6 +258,11 @@ void eeprom_93cx6_readb(struct eeprom_93cx6 *eeprom, const u8 byte,
 	eeprom_93cx6_write_bits(eeprom, command,
 		PCI_EEPROM_WIDTH_OPCODE + eeprom->width + 1);
 
+	if (has_quirk_extra_read_cycle(eeprom)) {
+		eeprom_93cx6_pulse_high(eeprom);
+		eeprom_93cx6_pulse_low(eeprom);
+	}
+
 	/*
 	 * Read the requested 8 bits.
 	 */
diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c
index 25c201cfb91e..e5da9ce26006 100644
--- a/drivers/tty/serial/8250/8250_aspeed_vuart.c
+++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c
@@ -569,7 +569,7 @@ static struct platform_driver aspeed_vuart_driver = {
 		.of_match_table = aspeed_vuart_table,
 	},
 	.probe = aspeed_vuart_probe,
-	.remove_new = aspeed_vuart_remove,
+	.remove = aspeed_vuart_remove,
 };
 
 module_platform_driver(aspeed_vuart_driver);
diff --git a/drivers/tty/serial/8250/8250_bcm2835aux.c b/drivers/tty/serial/8250/8250_bcm2835aux.c
index d7a0f271263a..fdb53b54e99e 100644
--- a/drivers/tty/serial/8250/8250_bcm2835aux.c
+++ b/drivers/tty/serial/8250/8250_bcm2835aux.c
@@ -267,7 +267,7 @@ static struct platform_driver bcm2835aux_serial_driver = {
 		.pm = pm_ptr(&bcm2835aux_dev_pm_ops),
 	},
 	.probe  = bcm2835aux_serial_probe,
-	.remove_new = bcm2835aux_serial_remove,
+	.remove = bcm2835aux_serial_remove,
 };
 module_platform_driver(bcm2835aux_serial_driver);
 
diff --git a/drivers/tty/serial/8250/8250_bcm7271.c b/drivers/tty/serial/8250/8250_bcm7271.c
index 2569ca69223f..d0b18358859e 100644
--- a/drivers/tty/serial/8250/8250_bcm7271.c
+++ b/drivers/tty/serial/8250/8250_bcm7271.c
@@ -812,7 +812,7 @@ static int brcmuart_handle_irq(struct uart_port *p)
 			/*
 			 * if Receive Data Interrupt is enabled and
 			 * we're uing hardware flow control, deassert
-			 * RTS and wait for any chars in the pipline to
+			 * RTS and wait for any chars in the pipeline to
 			 * arrive and then check for DR again.
 			 */
 			if ((ier & UART_IER_RDI) && (up->mcr & UART_MCR_AFE)) {
@@ -1204,7 +1204,7 @@ static struct platform_driver brcmuart_platform_driver = {
 		.of_match_table = brcmuart_dt_ids,
 	},
 	.probe		= brcmuart_probe,
-	.remove_new	= brcmuart_remove,
+	.remove		= brcmuart_remove,
 };
 
 static int __init brcmuart_init(void)
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index ab9e7f204260..6afcf27db3b8 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -750,7 +750,7 @@ static const struct dw8250_platform_data dw8250_renesas_rzn1_data = {
 	.quirks = DW_UART_QUIRK_CPR_VALUE | DW_UART_QUIRK_IS_DMA_FC,
 };
 
-static const struct dw8250_platform_data dw8250_starfive_jh7100_data = {
+static const struct dw8250_platform_data dw8250_skip_set_rate_data = {
 	.usr_reg = DW_UART_USR,
 	.quirks = DW_UART_QUIRK_SKIP_SET_RATE,
 };
@@ -760,7 +760,8 @@ static const struct of_device_id dw8250_of_match[] = {
 	{ .compatible = "cavium,octeon-3860-uart", .data = &dw8250_octeon_3860_data },
 	{ .compatible = "marvell,armada-38x-uart", .data = &dw8250_armada_38x_data },
 	{ .compatible = "renesas,rzn1-uart", .data = &dw8250_renesas_rzn1_data },
-	{ .compatible = "starfive,jh7100-uart", .data = &dw8250_starfive_jh7100_data },
+	{ .compatible = "sophgo,sg2044-uart", .data = &dw8250_skip_set_rate_data },
+	{ .compatible = "starfive,jh7100-uart", .data = &dw8250_skip_set_rate_data },
 	{ /* Sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, dw8250_of_match);
@@ -796,7 +797,7 @@ static struct platform_driver dw8250_platform_driver = {
 		.acpi_match_table = dw8250_acpi_match,
 	},
 	.probe			= dw8250_probe,
-	.remove_new		= dw8250_remove,
+	.remove			= dw8250_remove,
 };
 
 module_platform_driver(dw8250_platform_driver);
diff --git a/drivers/tty/serial/8250/8250_em.c b/drivers/tty/serial/8250/8250_em.c
index a754755100ff..35094f884492 100644
--- a/drivers/tty/serial/8250/8250_em.c
+++ b/drivers/tty/serial/8250/8250_em.c
@@ -219,7 +219,7 @@ static struct platform_driver serial8250_em_platform_driver = {
 		.of_match_table = serial8250_em_dt_ids,
 	},
 	.probe			= serial8250_em_probe,
-	.remove_new		= serial8250_em_remove,
+	.remove			= serial8250_em_remove,
 };
 
 module_platform_driver(serial8250_em_platform_driver);
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index b7a75db15249..fc5203446267 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -11,6 +11,7 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/dmi.h>
+#include <linux/eeprom_93cx6.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/math.h>
@@ -135,8 +136,6 @@
 #define UART_EXAR_REGB_EECS		BIT(5)
 #define UART_EXAR_REGB_EEDI		BIT(6)
 #define UART_EXAR_REGB_EEDO		BIT(7)
-#define UART_EXAR_REGB_EE_ADDR_SIZE	6
-#define UART_EXAR_REGB_EE_DATA_SIZE	16
 
 #define UART_EXAR_XR17C15X_PORT_OFFSET	0x200
 #define UART_EXAR_XR17V25X_PORT_OFFSET	0x200
@@ -179,18 +178,19 @@
 
 /* CTI EEPROM offsets */
 #define CTI_EE_OFF_XR17C15X_OSC_FREQ	0x04  /* 2 words */
-#define CTI_EE_OFF_XR17V25X_OSC_FREQ	0x08  /* 2 words */
 #define CTI_EE_OFF_XR17C15X_PART_NUM	0x0A  /* 4 words */
-#define CTI_EE_OFF_XR17V25X_PART_NUM	0x0E  /* 4 words */
 #define CTI_EE_OFF_XR17C15X_SERIAL_NUM	0x0E  /* 1 word */
+
+#define CTI_EE_OFF_XR17V25X_OSC_FREQ	0x08  /* 2 words */
+#define CTI_EE_OFF_XR17V25X_PART_NUM	0x0E  /* 4 words */
 #define CTI_EE_OFF_XR17V25X_SERIAL_NUM	0x12  /* 1 word */
+
 #define CTI_EE_OFF_XR17V35X_SERIAL_NUM	0x11  /* 2 word */
 #define CTI_EE_OFF_XR17V35X_BRD_FLAGS	0x13  /* 1 word */
 #define CTI_EE_OFF_XR17V35X_PORT_FLAGS	0x14  /* 1 word */
 
 #define CTI_EE_MASK_PORT_FLAGS_TYPE	GENMASK(7, 0)
-#define CTI_EE_MASK_OSC_FREQ_LOWER	GENMASK(15, 0)
-#define CTI_EE_MASK_OSC_FREQ_UPPER	GENMASK(31, 16)
+#define CTI_EE_MASK_OSC_FREQ		GENMASK(31, 0)
 
 #define CTI_FPGA_RS485_IO_REG		0x2008
 #define CTI_FPGA_CFG_INT_EN_REG		0x48
@@ -252,6 +252,7 @@ struct exar8250 {
 	unsigned int		nr;
 	unsigned int		osc_freq;
 	struct exar8250_board	*board;
+	struct eeprom_93cx6	eeprom;
 	void __iomem		*virt;
 	int			line[];
 };
@@ -267,92 +268,37 @@ static inline u8 exar_read_reg(struct exar8250 *priv, unsigned int reg)
 	return readb(priv->virt + reg);
 }
 
-static inline void exar_ee_select(struct exar8250 *priv)
-{
-	// Set chip select pin high to enable EEPROM reads/writes
-	exar_write_reg(priv, UART_EXAR_REGB, UART_EXAR_REGB_EECS);
-	// Min ~500ns delay needed between CS assert and EEPROM access
-	udelay(1);
-}
-
-static inline void exar_ee_deselect(struct exar8250 *priv)
-{
-	exar_write_reg(priv, UART_EXAR_REGB, 0x00);
-}
-
-static inline void exar_ee_write_bit(struct exar8250 *priv, u8 bit)
+static void exar_eeprom_93cx6_reg_read(struct eeprom_93cx6 *eeprom)
 {
-	u8 value = UART_EXAR_REGB_EECS;
+	struct exar8250 *priv = eeprom->data;
+	u8 regb = exar_read_reg(priv, UART_EXAR_REGB);
 
-	if (bit)
-		value |= UART_EXAR_REGB_EEDI;
-
-	// Clock out the bit on the EEPROM interface
-	exar_write_reg(priv, UART_EXAR_REGB, value);
-	// 2us delay = ~500khz clock speed
-	udelay(2);
-
-	value |= UART_EXAR_REGB_EECK;
-
-	exar_write_reg(priv, UART_EXAR_REGB, value);
-	udelay(2);
+	/* EECK and EECS always read 0 from REGB so only set EEDO */
+	eeprom->reg_data_out = regb & UART_EXAR_REGB_EEDO;
 }
 
-static inline u8 exar_ee_read_bit(struct exar8250 *priv)
+static void exar_eeprom_93cx6_reg_write(struct eeprom_93cx6 *eeprom)
 {
-	u8 regb;
-	u8 value = UART_EXAR_REGB_EECS;
-
-	// Clock in the bit on the EEPROM interface
-	exar_write_reg(priv, UART_EXAR_REGB, value);
-	// 2us delay = ~500khz clock speed
-	udelay(2);
+	struct exar8250 *priv = eeprom->data;
+	u8 regb = 0;
 
-	value |= UART_EXAR_REGB_EECK;
+	if (eeprom->reg_data_in)
+		regb |= UART_EXAR_REGB_EEDI;
+	if (eeprom->reg_data_clock)
+		regb |= UART_EXAR_REGB_EECK;
+	if (eeprom->reg_chip_select)
+		regb |= UART_EXAR_REGB_EECS;
 
-	exar_write_reg(priv, UART_EXAR_REGB, value);
-	udelay(2);
-
-	regb = exar_read_reg(priv, UART_EXAR_REGB);
-
-	return (regb & UART_EXAR_REGB_EEDO ? 1 : 0);
+	exar_write_reg(priv, UART_EXAR_REGB, regb);
 }
 
-/**
- * exar_ee_read() - Read a word from the EEPROM
- * @priv: Device's private structure
- * @ee_addr: Offset of EEPROM to read word from
- *
- * Read a single 16bit word from an Exar UART's EEPROM.
- * The type of the EEPROM is AT93C46D.
- *
- * Return: EEPROM word
- */
-static u16 exar_ee_read(struct exar8250 *priv, u8 ee_addr)
+static void exar_eeprom_init(struct exar8250 *priv)
 {
-	int i;
-	u16 data = 0;
-
-	exar_ee_select(priv);
-
-	// Send read command (opcode 110)
-	exar_ee_write_bit(priv, 1);
-	exar_ee_write_bit(priv, 1);
-	exar_ee_write_bit(priv, 0);
-
-	// Send address to read from
-	for (i = UART_EXAR_REGB_EE_ADDR_SIZE - 1; i >= 0; i--)
-		exar_ee_write_bit(priv, ee_addr & BIT(i));
-
-	// Read data 1 bit at a time starting with a dummy bit
-	for (i = UART_EXAR_REGB_EE_DATA_SIZE; i >= 0; i--) {
-		if (exar_ee_read_bit(priv))
-			data |= BIT(i);
-	}
-
-	exar_ee_deselect(priv);
-
-	return data;
+	priv->eeprom.data = priv;
+	priv->eeprom.register_read = exar_eeprom_93cx6_reg_read;
+	priv->eeprom.register_write = exar_eeprom_93cx6_reg_write;
+	priv->eeprom.width = PCI_EEPROM_WIDTH_93C46;
+	priv->eeprom.quirks |= PCI_EEPROM_QUIRK_EXTRA_READ_CYCLE;
 }
 
 /**
@@ -360,7 +306,7 @@ static u16 exar_ee_read(struct exar8250 *priv, u8 ee_addr)
  * @priv: Device's private structure
  * @mpio_num: MPIO number/offset to configure
  *
- * Configure a single MPIO as an output and disable tristate. It is reccomended
+ * Configure a single MPIO as an output and disable tristate. It is recommended
  * to set the level with exar_mpio_set_high()/exar_mpio_set_low() prior to
  * calling this function to ensure default MPIO pin state.
  *
@@ -516,7 +462,7 @@ static int xr17v35x_startup(struct uart_port *port)
 	serial_port_out(port, UART_XR_EFR, UART_EFR_ECB);
 
 	/*
-	 * Make sure all interrups are masked until initialization is
+	 * Make sure all interrupts are masked until initialization is
 	 * complete and the FIFOs are cleared
 	 *
 	 * Synchronize UART_IER access against the console.
@@ -696,20 +642,16 @@ static int cti_plx_int_enable(struct exar8250 *priv)
  */
 static int cti_read_osc_freq(struct exar8250 *priv, u8 eeprom_offset)
 {
-	u16 lower_word;
-	u16 upper_word;
+	__le16 ee_words[2];
+	u32 osc_freq;
 
-	lower_word = exar_ee_read(priv, eeprom_offset);
-	// Check if EEPROM word was blank
-	if (lower_word == 0xFFFF)
-		return -EIO;
+	eeprom_93cx6_multiread(&priv->eeprom, eeprom_offset, ee_words, ARRAY_SIZE(ee_words));
 
-	upper_word = exar_ee_read(priv, (eeprom_offset + 1));
-	if (upper_word == 0xFFFF)
+	osc_freq = le16_to_cpu(ee_words[0]) | (le16_to_cpu(ee_words[1]) << 16);
+	if (osc_freq == CTI_EE_MASK_OSC_FREQ)
 		return -EIO;
 
-	return FIELD_PREP(CTI_EE_MASK_OSC_FREQ_LOWER, lower_word) |
-	       FIELD_PREP(CTI_EE_MASK_OSC_FREQ_UPPER, upper_word);
+	return osc_freq;
 }
 
 /**
@@ -833,7 +775,7 @@ static enum cti_port_type cti_get_port_type_xr17v35x(struct exar8250 *priv,
 	u8 offset;
 
 	offset = CTI_EE_OFF_XR17V35X_PORT_FLAGS + port_num;
-	port_flags = exar_ee_read(priv, offset);
+	eeprom_93cx6_read(&priv->eeprom, offset, &port_flags);
 
 	port_type = FIELD_GET(CTI_EE_MASK_PORT_FLAGS_TYPE, port_flags);
 	if (CTI_PORT_TYPE_VALID(port_type))
@@ -1551,6 +1493,8 @@ exar_pci_probe(struct pci_dev *pcidev, const struct pci_device_id *ent)
 	if (rc)
 		return rc;
 
+	exar_eeprom_init(priv);
+
 	for (i = 0; i < nr_ports && i < maxnr; i++) {
 		rc = board->setup(priv, pcidev, &uart, i);
 		if (rc) {
diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c
index e2aa2a1a02dd..b4461a89b8d0 100644
--- a/drivers/tty/serial/8250/8250_fintek.c
+++ b/drivers/tty/serial/8250/8250_fintek.c
@@ -21,6 +21,7 @@
 #define CHIP_ID_F81866 0x1010
 #define CHIP_ID_F81966 0x0215
 #define CHIP_ID_F81216AD 0x1602
+#define CHIP_ID_F81216E 0x1617
 #define CHIP_ID_F81216H 0x0501
 #define CHIP_ID_F81216 0x0802
 #define VENDOR_ID1 0x23
@@ -125,7 +126,7 @@ static int fintek_8250_enter_key(u16 base_port, u8 key)
 	if (!request_muxed_region(base_port, 2, "8250_fintek"))
 		return -EBUSY;
 
-	/* Force to deactive all SuperIO in this base_port */
+	/* Force to deactivate all SuperIO in this base_port */
 	outb(EXIT_KEY, base_port + ADDR_PORT);
 
 	outb(key, base_port + ADDR_PORT);
@@ -158,6 +159,7 @@ static int fintek_8250_check_id(struct fintek_8250 *pdata)
 	case CHIP_ID_F81866:
 	case CHIP_ID_F81966:
 	case CHIP_ID_F81216AD:
+	case CHIP_ID_F81216E:
 	case CHIP_ID_F81216H:
 	case CHIP_ID_F81216:
 		break;
@@ -181,6 +183,7 @@ static int fintek_8250_get_ldn_range(struct fintek_8250 *pdata, int *min,
 		return 0;
 
 	case CHIP_ID_F81216AD:
+	case CHIP_ID_F81216E:
 	case CHIP_ID_F81216H:
 	case CHIP_ID_F81216:
 		*min = F81216_LDN_LOW;
@@ -250,6 +253,7 @@ static void fintek_8250_set_irq_mode(struct fintek_8250 *pdata, bool is_level)
 		break;
 
 	case CHIP_ID_F81216AD:
+	case CHIP_ID_F81216E:
 	case CHIP_ID_F81216H:
 	case CHIP_ID_F81216:
 		sio_write_mask_reg(pdata, FINTEK_IRQ_MODE, IRQ_SHARE,
@@ -263,7 +267,8 @@ static void fintek_8250_set_irq_mode(struct fintek_8250 *pdata, bool is_level)
 static void fintek_8250_set_max_fifo(struct fintek_8250 *pdata)
 {
 	switch (pdata->pid) {
-	case CHIP_ID_F81216H: /* 128Bytes FIFO */
+	case CHIP_ID_F81216E: /* 128Bytes FIFO */
+	case CHIP_ID_F81216H:
 	case CHIP_ID_F81966:
 	case CHIP_ID_F81866:
 		sio_write_mask_reg(pdata, FIFO_CTRL,
@@ -297,6 +302,7 @@ static void fintek_8250_set_termios(struct uart_port *port,
 		goto exit;
 
 	switch (pdata->pid) {
+	case CHIP_ID_F81216E:
 	case CHIP_ID_F81216H:
 		reg = RS485;
 		break;
@@ -346,6 +352,7 @@ static void fintek_8250_set_termios_handler(struct uart_8250_port *uart)
 	struct fintek_8250 *pdata = uart->port.private_data;
 
 	switch (pdata->pid) {
+	case CHIP_ID_F81216E:
 	case CHIP_ID_F81216H:
 	case CHIP_ID_F81966:
 	case CHIP_ID_F81866:
@@ -438,6 +445,11 @@ static void fintek_8250_set_rs485_handler(struct uart_8250_port *uart)
 			uart->port.rs485_supported = fintek_8250_rs485_supported;
 		break;
 
+	case CHIP_ID_F81216E: /* F81216E does not support RS485 delays */
+		uart->port.rs485_config = fintek_8250_rs485_config;
+		uart->port.rs485_supported = fintek_8250_rs485_supported;
+		break;
+
 	default: /* No RS485 Auto direction functional */
 		break;
 	}
diff --git a/drivers/tty/serial/8250/8250_fsl.c b/drivers/tty/serial/8250/8250_fsl.c
index b4ed442082a8..1b7bd55619c6 100644
--- a/drivers/tty/serial/8250/8250_fsl.c
+++ b/drivers/tty/serial/8250/8250_fsl.c
@@ -179,7 +179,7 @@ static struct platform_driver fsl8250_platform_driver = {
 		.acpi_match_table	= ACPI_PTR(fsl_8250_acpi_id),
 	},
 	.probe			= fsl8250_acpi_probe,
-	.remove_new		= fsl8250_acpi_remove,
+	.remove			= fsl8250_acpi_remove,
 };
 
 module_platform_driver(fsl8250_platform_driver);
diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c
index a2783e38a2e3..a73dd3773640 100644
--- a/drivers/tty/serial/8250/8250_ingenic.c
+++ b/drivers/tty/serial/8250/8250_ingenic.c
@@ -361,7 +361,7 @@ static struct platform_driver ingenic_uart_platform_driver = {
 		.of_match_table	= of_match,
 	},
 	.probe			= ingenic_uart_probe,
-	.remove_new		= ingenic_uart_remove,
+	.remove			= ingenic_uart_remove,
 };
 
 module_platform_driver(ingenic_uart_platform_driver);
diff --git a/drivers/tty/serial/8250/8250_ioc3.c b/drivers/tty/serial/8250/8250_ioc3.c
index 50c77c3dacf2..499e80aa4cf9 100644
--- a/drivers/tty/serial/8250/8250_ioc3.c
+++ b/drivers/tty/serial/8250/8250_ioc3.c
@@ -84,7 +84,7 @@ static void serial8250_ioc3_remove(struct platform_device *pdev)
 
 static struct platform_driver serial8250_ioc3_driver = {
 	.probe  = serial8250_ioc3_probe,
-	.remove_new = serial8250_ioc3_remove,
+	.remove = serial8250_ioc3_remove,
 	.driver = {
 		.name = "ioc3-serial8250",
 	}
diff --git a/drivers/tty/serial/8250/8250_lpc18xx.c b/drivers/tty/serial/8250/8250_lpc18xx.c
index 47e1a056a60c..d52445948da0 100644
--- a/drivers/tty/serial/8250/8250_lpc18xx.c
+++ b/drivers/tty/serial/8250/8250_lpc18xx.c
@@ -195,7 +195,7 @@ MODULE_DEVICE_TABLE(of, lpc18xx_serial_match);
 
 static struct platform_driver lpc18xx_serial_driver = {
 	.probe  = lpc18xx_serial_probe,
-	.remove_new = lpc18xx_serial_remove,
+	.remove = lpc18xx_serial_remove,
 	.driver = {
 		.name = "lpc18xx-uart",
 		.of_match_table = lpc18xx_serial_match,
diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
index b9cca210e171..b44de2ed7413 100644
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -346,8 +346,8 @@ mtk8250_set_termios(struct uart_port *port, struct ktermios *termios,
 	/*
 	 * Mediatek UARTs use an extra highspeed register (MTK_UART_HIGHS)
 	 *
-	 * We need to recalcualte the quot register, as the claculation depends
-	 * on the vaule in the highspeed register.
+	 * We need to recalculate the quot register, as the calculation depends
+	 * on the value in the highspeed register.
 	 *
 	 * Some baudrates are not supported by the chip, so we use the next
 	 * lower rate supported and update termios c_flag.
@@ -654,7 +654,7 @@ static struct platform_driver mtk8250_platform_driver = {
 		.of_match_table	= mtk8250_of_match,
 	},
 	.probe			= mtk8250_probe,
-	.remove_new		= mtk8250_remove,
+	.remove			= mtk8250_remove,
 };
 module_platform_driver(mtk8250_platform_driver);
 
diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index e14f47ef1172..64aed7efc569 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -352,7 +352,7 @@ static struct platform_driver of_platform_serial_driver = {
 		.pm = &of_serial_pm_ops,
 	},
 	.probe = of_platform_serial_probe,
-	.remove_new = of_platform_serial_remove,
+	.remove = of_platform_serial_remove,
 };
 
 module_platform_driver(of_platform_serial_driver);
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 88b58f44e4e9..9eb9aa766811 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -776,12 +776,12 @@ static void omap_8250_shutdown(struct uart_port *port)
 	struct uart_8250_port *up = up_to_u8250p(port);
 	struct omap8250_priv *priv = port->private_data;
 
+	pm_runtime_get_sync(port->dev);
+
 	flush_work(&priv->qos_work);
 	if (up->dma)
 		omap_8250_rx_dma_flush(up);
 
-	pm_runtime_get_sync(port->dev);
-
 	serial_out(up, UART_OMAP_WER, 0);
 	if (priv->habit & UART_HAS_EFR2)
 		serial_out(up, UART_OMAP_EFR2, 0x0);
@@ -1304,7 +1304,7 @@ static void am654_8250_handle_rx_dma(struct uart_8250_port *up, u8 iir,
 
 /*
  * This is mostly serial8250_handle_irq(). We have a slightly different DMA
- * hoook for RX/TX and need different logic for them in the ISR. Therefore we
+ * hook for RX/TX and need different logic for them in the ISR. Therefore we
  * use the default routine in the non-DMA case and this one for with DMA.
  */
 static int omap_8250_dma_handle_irq(struct uart_port *port)
@@ -1338,7 +1338,7 @@ static int omap_8250_dma_handle_irq(struct uart_port *port)
 			serial8250_tx_chars(up);
 		} else  {
 			/*
-			 * try again due to an earlier failer which
+			 * try again due to an earlier failure which
 			 * might have been resolved by now.
 			 */
 			if (omap_8250_tx_dma(up))
@@ -1867,7 +1867,7 @@ static struct platform_driver omap8250_platform_driver = {
 		.of_match_table = omap8250_dt_ids,
 	},
 	.probe			= omap8250_probe,
-	.remove_new		= omap8250_remove,
+	.remove			= omap8250_remove,
 };
 module_platform_driver(omap8250_platform_driver);
 
diff --git a/drivers/tty/serial/8250/8250_platform.c b/drivers/tty/serial/8250/8250_platform.c
index be7ff07cbdd0..8bdc1879d952 100644
--- a/drivers/tty/serial/8250/8250_platform.c
+++ b/drivers/tty/serial/8250/8250_platform.c
@@ -285,7 +285,7 @@ MODULE_DEVICE_TABLE(acpi, acpi_platform_serial_table);
 
 static struct platform_driver serial8250_isa_driver = {
 	.probe		= serial8250_probe,
-	.remove_new	= serial8250_remove,
+	.remove		= serial8250_remove,
 	.suspend	= serial8250_suspend,
 	.resume		= serial8250_resume,
 	.driver		= {
diff --git a/drivers/tty/serial/8250/8250_pxa.c b/drivers/tty/serial/8250/8250_pxa.c
index 96dd6126296c..6dd0190b4843 100644
--- a/drivers/tty/serial/8250/8250_pxa.c
+++ b/drivers/tty/serial/8250/8250_pxa.c
@@ -154,7 +154,7 @@ static void serial_pxa_remove(struct platform_device *pdev)
 
 static struct platform_driver serial_pxa_driver = {
 	.probe          = serial_pxa_probe,
-	.remove_new     = serial_pxa_remove,
+	.remove         = serial_pxa_remove,
 
 	.driver		= {
 		.name	= "pxa2xx-uart",
diff --git a/drivers/tty/serial/8250/8250_tegra.c b/drivers/tty/serial/8250/8250_tegra.c
index 60a80d00d251..2f3b0075763f 100644
--- a/drivers/tty/serial/8250/8250_tegra.c
+++ b/drivers/tty/serial/8250/8250_tegra.c
@@ -182,7 +182,7 @@ static struct platform_driver tegra_uart_driver = {
 		.acpi_match_table = ACPI_PTR(tegra_uart_acpi_match),
 	},
 	.probe = tegra_uart_probe,
-	.remove_new = tegra_uart_remove,
+	.remove = tegra_uart_remove,
 };
 
 module_platform_driver(tegra_uart_driver);
diff --git a/drivers/tty/serial/8250/8250_uniphier.c b/drivers/tty/serial/8250/8250_uniphier.c
index 670d2ca0f757..4874a9632db3 100644
--- a/drivers/tty/serial/8250/8250_uniphier.c
+++ b/drivers/tty/serial/8250/8250_uniphier.c
@@ -282,7 +282,7 @@ MODULE_DEVICE_TABLE(of, uniphier_uart_match);
 
 static struct platform_driver uniphier_uart_platform_driver = {
 	.probe		= uniphier_uart_probe,
-	.remove_new	= uniphier_uart_remove,
+	.remove		= uniphier_uart_remove,
 	.driver = {
 		.name	= "uniphier-uart",
 		.of_match_table = uniphier_uart_match,
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 1eb20350fcf4..55d26d16df9b 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -150,6 +150,7 @@ config SERIAL_8250_EXAR
 	tristate "8250/16550 Exar/Commtech PCI/PCIe device support"
 	depends on SERIAL_8250 && PCI
 	select SERIAL_8250_PCILIB
+	select EEPROM_93CX6
 	default SERIAL_8250
 	help
 	  This builds support for XR17C1xx, XR17V3xx and some Commtech
diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c
index effcba71ea77..b9c3c3bed0c1 100644
--- a/drivers/tty/serial/altera_jtaguart.c
+++ b/drivers/tty/serial/altera_jtaguart.c
@@ -175,8 +175,8 @@ static int altera_jtaguart_startup(struct uart_port *port)
 	ret = request_irq(port->irq, altera_jtaguart_interrupt, 0,
 			DRV_NAME, port);
 	if (ret) {
-		pr_err(DRV_NAME ": unable to attach Altera JTAG UART %d "
-		       "interrupt vector=%d\n", port->line, port->irq);
+		dev_err(port->dev, "unable to attach Altera JTAG UART %d interrupt vector=%d\n",
+			port->line, port->irq);
 		return ret;
 	}
 
@@ -449,7 +449,7 @@ MODULE_DEVICE_TABLE(of, altera_jtaguart_match);
 
 static struct platform_driver altera_jtaguart_platform_driver = {
 	.probe	= altera_jtaguart_probe,
-	.remove_new = altera_jtaguart_remove,
+	.remove = altera_jtaguart_remove,
 	.driver	= {
 		.name		= DRV_NAME,
 		.of_match_table	= of_match_ptr(altera_jtaguart_match),
diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c
index 897f0995b2fe..c94655453c33 100644
--- a/drivers/tty/serial/altera_uart.c
+++ b/drivers/tty/serial/altera_uart.c
@@ -307,8 +307,8 @@ static int altera_uart_startup(struct uart_port *port)
 		ret = request_irq(port->irq, altera_uart_interrupt, 0,
 				dev_name(port->dev), port);
 		if (ret) {
-			pr_err(DRV_NAME ": unable to attach Altera UART %d "
-			       "interrupt vector=%d\n", port->line, port->irq);
+			dev_err(port->dev, "unable to attach Altera UART %d interrupt vector=%d\n",
+				port->line, port->irq);
 			return ret;
 		}
 	}
@@ -617,7 +617,7 @@ MODULE_DEVICE_TABLE(of, altera_uart_match);
 
 static struct platform_driver altera_uart_platform_driver = {
 	.probe	= altera_uart_probe,
-	.remove_new = altera_uart_remove,
+	.remove = altera_uart_remove,
 	.driver	= {
 		.name		= DRV_NAME,
 		.of_match_table	= of_match_ptr(altera_uart_match),
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 1c60850030b1..69b7a3e1e418 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1819,6 +1819,13 @@ static void pl011_unthrottle_rx(struct uart_port *port)
 
 	pl011_write(uap->im, uap, REG_IMSC);
 
+#ifdef CONFIG_DMA_ENGINE
+	if (uap->using_rx_dma) {
+		uap->dmacr |= UART011_RXDMAE;
+		pl011_write(uap->dmacr, uap, REG_DMACR);
+	}
+#endif
+
 	uart_port_unlock_irqrestore(&uap->port, flags);
 }
 
@@ -2937,7 +2944,7 @@ MODULE_DEVICE_TABLE(acpi, sbsa_uart_acpi_match);
 
 static struct platform_driver arm_sbsa_uart_platform_driver = {
 	.probe		= sbsa_uart_probe,
-	.remove_new	= sbsa_uart_remove,
+	.remove		= sbsa_uart_remove,
 	.driver	= {
 		.name	= "sbsa-uart",
 		.pm	= &pl011_dev_pm_ops,
diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c
index 47889a557119..8bb33556b312 100644
--- a/drivers/tty/serial/ar933x_uart.c
+++ b/drivers/tty/serial/ar933x_uart.c
@@ -832,7 +832,7 @@ MODULE_DEVICE_TABLE(of, ar933x_uart_of_ids);
 
 static struct platform_driver ar933x_uart_platform_driver = {
 	.probe		= ar933x_uart_probe,
-	.remove_new	= ar933x_uart_remove,
+	.remove		= ar933x_uart_remove,
 	.driver		= {
 		.name		= DRIVER_NAME,
 		.of_match_table = of_match_ptr(ar933x_uart_of_ids),
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 09b246c9e389..0cf05ac18993 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1166,7 +1166,7 @@ static void atmel_rx_from_dma(struct uart_port *port)
 		port->icount.rx += count;
 	}
 
-	/* USART retreives ownership of RX DMA buffer */
+	/* USART retrieves ownership of RX DMA buffer */
 	dma_sync_single_for_device(port->dev, atmel_port->rx_phys,
 				   ATMEL_SERIAL_RX_SIZE, DMA_FROM_DEVICE);
 
@@ -2419,17 +2419,11 @@ static void atmel_release_port(struct uart_port *port)
 static int atmel_request_port(struct uart_port *port)
 {
 	struct platform_device *mpdev = to_platform_device(port->dev->parent);
-	int size = resource_size(mpdev->resource);
-
-	if (!request_mem_region(port->mapbase, size, "atmel_serial"))
-		return -EBUSY;
 
 	if (port->flags & UPF_IOREMAP) {
-		port->membase = ioremap(port->mapbase, size);
-		if (port->membase == NULL) {
-			release_mem_region(port->mapbase, size);
-			return -ENOMEM;
-		}
+		port->membase = devm_platform_ioremap_resource(mpdev, 0);
+		if (IS_ERR(port->membase))
+			return PTR_ERR(port->membase);
 	}
 
 	return 0;
@@ -3017,7 +3011,7 @@ static SIMPLE_DEV_PM_OPS(atmel_serial_pm_ops, atmel_serial_suspend,
 
 static struct platform_driver atmel_serial_driver = {
 	.probe		= atmel_serial_probe,
-	.remove_new	= atmel_serial_remove,
+	.remove		= atmel_serial_remove,
 	.driver		= {
 		.name			= "atmel_usart_serial",
 		.of_match_table		= of_match_ptr(atmel_serial_dt_ids),
diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c
index b88cc28c94e3..51df9d2d8bfc 100644
--- a/drivers/tty/serial/bcm63xx_uart.c
+++ b/drivers/tty/serial/bcm63xx_uart.c
@@ -884,7 +884,7 @@ MODULE_DEVICE_TABLE(of, bcm63xx_of_match);
  */
 static struct platform_driver bcm_uart_platform_driver = {
 	.probe	= bcm_uart_probe,
-	.remove_new = bcm_uart_remove,
+	.remove = bcm_uart_remove,
 	.driver	= {
 		.name  = "bcm63xx_uart",
 		.of_match_table = bcm63xx_of_match,
diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c
index 30425a3d19fb..83186bf50002 100644
--- a/drivers/tty/serial/clps711x.c
+++ b/drivers/tty/serial/clps711x.c
@@ -529,7 +529,7 @@ static struct platform_driver clps711x_uart_platform = {
 		.of_match_table	= of_match_ptr(clps711x_uart_dt_ids),
 	},
 	.probe	= uart_clps711x_probe,
-	.remove_new = uart_clps711x_remove,
+	.remove = uart_clps711x_remove,
 };
 
 static int __init uart_clps711x_init(void)
diff --git a/drivers/tty/serial/cpm_uart.c b/drivers/tty/serial/cpm_uart.c
index 6eb8625de435..b778a20ec9b1 100644
--- a/drivers/tty/serial/cpm_uart.c
+++ b/drivers/tty/serial/cpm_uart.c
@@ -1573,7 +1573,7 @@ static struct platform_driver cpm_uart_driver = {
 		.of_match_table = cpm_uart_match,
 	},
 	.probe = cpm_uart_probe,
-	.remove_new = cpm_uart_remove,
+	.remove = cpm_uart_remove,
  };
 
 static int __init cpm_uart_init(void)
diff --git a/drivers/tty/serial/digicolor-usart.c b/drivers/tty/serial/digicolor-usart.c
index 2ccd13cc0a89..d2482df5cb9b 100644
--- a/drivers/tty/serial/digicolor-usart.c
+++ b/drivers/tty/serial/digicolor-usart.c
@@ -522,7 +522,7 @@ static struct platform_driver digicolor_uart_platform = {
 		.of_match_table	= of_match_ptr(digicolor_uart_dt_ids),
 	},
 	.probe	= digicolor_uart_probe,
-	.remove_new = digicolor_uart_remove,
+	.remove = digicolor_uart_remove,
 };
 
 static int __init digicolor_uart_init(void)
diff --git a/drivers/tty/serial/esp32_acm.c b/drivers/tty/serial/esp32_acm.c
index 85eb0392e379..bb7cc65427f0 100644
--- a/drivers/tty/serial/esp32_acm.c
+++ b/drivers/tty/serial/esp32_acm.c
@@ -423,7 +423,7 @@ static void esp32s3_acm_remove(struct platform_device *pdev)
 
 static struct platform_driver esp32s3_acm_driver = {
 	.probe		= esp32s3_acm_probe,
-	.remove_new	= esp32s3_acm_remove,
+	.remove		= esp32s3_acm_remove,
 	.driver		= {
 		.name	= DRIVER_NAME,
 		.of_match_table	= esp32s3_acm_dt_ids,
diff --git a/drivers/tty/serial/esp32_uart.c b/drivers/tty/serial/esp32_uart.c
index 8c86cf9cb763..667c2198a03a 100644
--- a/drivers/tty/serial/esp32_uart.c
+++ b/drivers/tty/serial/esp32_uart.c
@@ -743,7 +743,7 @@ static void esp32_uart_remove(struct platform_device *pdev)
 
 static struct platform_driver esp32_uart_driver = {
 	.probe		= esp32_uart_probe,
-	.remove_new	= esp32_uart_remove,
+	.remove		= esp32_uart_remove,
 	.driver		= {
 		.name	= DRIVER_NAME,
 		.of_match_table	= esp32_uart_dt_ids,
diff --git a/drivers/tty/serial/fsl_linflexuart.c b/drivers/tty/serial/fsl_linflexuart.c
index e972df4b188d..e70a56de1fce 100644
--- a/drivers/tty/serial/fsl_linflexuart.c
+++ b/drivers/tty/serial/fsl_linflexuart.c
@@ -882,7 +882,7 @@ static SIMPLE_DEV_PM_OPS(linflex_pm_ops, linflex_suspend, linflex_resume);
 
 static struct platform_driver linflex_driver = {
 	.probe		= linflex_probe,
-	.remove_new	= linflex_remove,
+	.remove		= linflex_remove,
 	.driver		= {
 		.name	= DRIVER_NAME,
 		.of_match_table	= linflex_dt_ids,
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 77efa7ee6eda..57b0632a3db6 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -184,6 +184,7 @@
 #define UARTCTRL_SBK		0x00010000
 #define UARTCTRL_MA1IE		0x00008000
 #define UARTCTRL_MA2IE		0x00004000
+#define UARTCTRL_M7		0x00000800
 #define UARTCTRL_IDLECFG	GENMASK(10, 8)
 #define UARTCTRL_LOOPS		0x00000080
 #define UARTCTRL_DOZEEN		0x00000040
@@ -2222,8 +2223,9 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
 	modem = lpuart32_read(&sport->port, UARTMODIR);
 	sport->is_cs7 = false;
 	/*
-	 * only support CS8 and CS7, and for CS7 must enable PE.
+	 * only support CS8 and CS7
 	 * supported mode:
+	 *  - (7,n,1) (imx only)
 	 *  - (7,e/o,1)
 	 *  - (8,n,1)
 	 *  - (8,m/s,1)
@@ -2238,7 +2240,7 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	if ((termios->c_cflag & CSIZE) == CS8 ||
 		(termios->c_cflag & CSIZE) == CS7)
-		ctrl = old_ctrl & ~UARTCTRL_M;
+		ctrl = old_ctrl & ~(UARTCTRL_M | UARTCTRL_M7);
 
 	if (termios->c_cflag & CMSPAR) {
 		if ((termios->c_cflag & CSIZE) != CS8) {
@@ -2265,9 +2267,18 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
 	else
 		bd &= ~UARTBAUD_SBNS;
 
-	/* parity must be enabled when CS7 to match 8-bits format */
-	if ((termios->c_cflag & CSIZE) == CS7)
-		termios->c_cflag |= PARENB;
+	/*
+	 * imx support 7-bits format, no limitation on parity when CS7
+	 * for layerscape, parity must be enabled when CS7 to match 8-bits format
+	 */
+	if ((termios->c_cflag & CSIZE) == CS7 && !(termios->c_cflag & PARENB)) {
+		if (is_imx7ulp_lpuart(sport) ||
+		    is_imx8ulp_lpuart(sport) ||
+		    is_imx8qxp_lpuart(sport))
+			ctrl |= UARTCTRL_M7;
+		else
+			termios->c_cflag |= PARENB;
+	}
 
 	if ((termios->c_cflag & PARENB)) {
 		if (termios->c_cflag & CMSPAR) {
@@ -3206,7 +3217,7 @@ static const struct dev_pm_ops lpuart_pm_ops = {
 
 static struct platform_driver lpuart_driver = {
 	.probe		= lpuart_probe,
-	.remove_new	= lpuart_remove,
+	.remove		= lpuart_remove,
 	.driver		= {
 		.name	= "fsl-lpuart",
 		.of_match_table = lpuart_dt_ids,
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 90974d338f3c..17f70e4bee43 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -230,6 +230,8 @@ struct imx_port {
 	unsigned int            saved_reg[10];
 	bool			context_saved;
 
+	bool			last_putchar_was_newline;
+
 	enum imx_tx_state	tx_state;
 	struct hrtimer		trigger_start_tx;
 	struct hrtimer		trigger_stop_tx;
@@ -370,6 +372,7 @@ static void imx_uart_soft_reset(struct imx_port *sport)
 	sport->idle_counter = 0;
 }
 
+/* called with port.lock taken and irqs off */
 static void imx_uart_disable_loopback_rs485(struct imx_port *sport)
 {
 	unsigned int uts;
@@ -470,6 +473,7 @@ static void imx_uart_stop_tx(struct uart_port *port)
 	}
 }
 
+/* called with port.lock taken and irqs off */
 static void imx_uart_stop_rx_with_loopback_ctrl(struct uart_port *port, bool loopback)
 {
 	struct imx_port *sport = to_imx_port(port);
@@ -818,6 +822,8 @@ static irqreturn_t imx_uart_txint(int irq, void *dev_id)
  * issuing soft reset to the UART (just stop/start of RX does not help). Note
  * that what we do here is sending isolated start bit about 2.4 times shorter
  * than it is to be on UART configured baud rate.
+ *
+ * Called with port.lock taken and irqs off.
  */
 static void imx_uart_check_flood(struct imx_port *sport, u32 usr2)
 {
@@ -853,6 +859,7 @@ static void imx_uart_check_flood(struct imx_port *sport, u32 usr2)
 	}
 }
 
+/* called with port.lock taken and irqs off */
 static irqreturn_t __imx_uart_rxint(int irq, void *dev_id)
 {
 	struct imx_port *sport = dev_id;
@@ -931,6 +938,7 @@ static void imx_uart_clear_rx_errors(struct imx_port *sport);
 /*
  * We have a modem side uart, so the meanings of RTS and CTS are inverted.
  */
+/* called with port.lock taken and irqs off */
 static unsigned int imx_uart_get_hwmctrl(struct imx_port *sport)
 {
 	unsigned int tmp = TIOCM_DSR;
@@ -953,6 +961,8 @@ static unsigned int imx_uart_get_hwmctrl(struct imx_port *sport)
 
 /*
  * Handle any change of modem status signal since we were last called.
+ *
+ * Called with port.lock taken and irqs off.
  */
 static void imx_uart_mctrl_check(struct imx_port *sport)
 {
@@ -1292,6 +1302,7 @@ static int imx_uart_start_rx_dma(struct imx_port *sport)
 	return 0;
 }
 
+/* called with port.lock taken and irqs off */
 static void imx_uart_clear_rx_errors(struct imx_port *sport)
 {
 	struct tty_port *port = &sport->port.state->port;
@@ -1422,6 +1433,7 @@ err:
 	return ret;
 }
 
+/* called with port.lock taken and irqs off */
 static void imx_uart_enable_dma(struct imx_port *sport)
 {
 	u32 ucr1;
@@ -2069,26 +2081,34 @@ static void imx_uart_console_putchar(struct uart_port *port, unsigned char ch)
 		barrier();
 
 	imx_uart_writel(sport, ch, URTX0);
+
+	sport->last_putchar_was_newline = (ch == '\n');
 }
 
-/*
- * Interrupts are disabled on entering
- */
-static void
-imx_uart_console_write(struct console *co, const char *s, unsigned int count)
+static void imx_uart_console_device_lock(struct console *co, unsigned long *flags)
+{
+	struct uart_port *up = &imx_uart_ports[co->index]->port;
+
+	return __uart_port_lock_irqsave(up, flags);
+}
+
+static void imx_uart_console_device_unlock(struct console *co, unsigned long flags)
+{
+	struct uart_port *up = &imx_uart_ports[co->index]->port;
+
+	return __uart_port_unlock_irqrestore(up, flags);
+}
+
+static void imx_uart_console_write_atomic(struct console *co,
+					  struct nbcon_write_context *wctxt)
 {
 	struct imx_port *sport = imx_uart_ports[co->index];
+	struct uart_port *port = &sport->port;
 	struct imx_port_ucrs old_ucr;
-	unsigned long flags;
 	unsigned int ucr1, usr2;
-	int locked = 1;
 
-	if (sport->port.sysrq)
-		locked = 0;
-	else if (oops_in_progress)
-		locked = uart_port_trylock_irqsave(&sport->port, &flags);
-	else
-		uart_port_lock_irqsave(&sport->port, &flags);
+	if (!nbcon_enter_unsafe(wctxt))
+		return;
 
 	/*
 	 *	First, save UCR1/2/3 and then disable interrupts
@@ -2102,10 +2122,12 @@ imx_uart_console_write(struct console *co, const char *s, unsigned int count)
 	ucr1 &= ~(UCR1_TRDYEN | UCR1_RRDYEN | UCR1_RTSDEN);
 
 	imx_uart_writel(sport, ucr1, UCR1);
-
 	imx_uart_writel(sport, old_ucr.ucr2 | UCR2_TXEN, UCR2);
 
-	uart_console_write(&sport->port, s, count, imx_uart_console_putchar);
+	if (!sport->last_putchar_was_newline)
+		uart_console_write(port, "\n", 1, imx_uart_console_putchar);
+	uart_console_write(port, wctxt->outbuf, wctxt->len,
+			   imx_uart_console_putchar);
 
 	/*
 	 *	Finally, wait for transmitter to become empty
@@ -2115,8 +2137,73 @@ imx_uart_console_write(struct console *co, const char *s, unsigned int count)
 				 0, USEC_PER_SEC, false, sport, USR2);
 	imx_uart_ucrs_restore(sport, &old_ucr);
 
-	if (locked)
-		uart_port_unlock_irqrestore(&sport->port, flags);
+	nbcon_exit_unsafe(wctxt);
+}
+
+static void imx_uart_console_write_thread(struct console *co,
+					  struct nbcon_write_context *wctxt)
+{
+	struct imx_port *sport = imx_uart_ports[co->index];
+	struct uart_port *port = &sport->port;
+	struct imx_port_ucrs old_ucr;
+	unsigned int ucr1, usr2;
+
+	if (!nbcon_enter_unsafe(wctxt))
+		return;
+
+	/*
+	 *	First, save UCR1/2/3 and then disable interrupts
+	 */
+	imx_uart_ucrs_save(sport, &old_ucr);
+	ucr1 = old_ucr.ucr1;
+
+	if (imx_uart_is_imx1(sport))
+		ucr1 |= IMX1_UCR1_UARTCLKEN;
+	ucr1 |= UCR1_UARTEN;
+	ucr1 &= ~(UCR1_TRDYEN | UCR1_RRDYEN | UCR1_RTSDEN);
+
+	imx_uart_writel(sport, ucr1, UCR1);
+	imx_uart_writel(sport, old_ucr.ucr2 | UCR2_TXEN, UCR2);
+
+	if (nbcon_exit_unsafe(wctxt)) {
+		int len = READ_ONCE(wctxt->len);
+		int i;
+
+		/*
+		 * Write out the message. Toggle unsafe for each byte in order
+		 * to give another (higher priority) context the opportunity
+		 * for a friendly takeover. If such a takeover occurs, this
+		 * context must reacquire ownership in order to perform final
+		 * actions (such as re-enabling the interrupts).
+		 *
+		 * IMPORTANT: wctxt->outbuf and wctxt->len are no longer valid
+		 *	      after a reacquire so writing the message must be
+		 *	      aborted.
+		 */
+		for (i = 0; i < len; i++) {
+			if (!nbcon_enter_unsafe(wctxt))
+				break;
+
+			uart_console_write(port, wctxt->outbuf + i, 1,
+					   imx_uart_console_putchar);
+
+			if (!nbcon_exit_unsafe(wctxt))
+				break;
+		}
+	}
+
+	while (!nbcon_enter_unsafe(wctxt))
+		nbcon_reacquire_nobuf(wctxt);
+
+	/*
+	 *	Finally, wait for transmitter to become empty
+	 *	and restore UCR1/2/3
+	 */
+	read_poll_timeout(imx_uart_readl, usr2, usr2 & USR2_TXDC,
+			  0, USEC_PER_SEC, false, sport, USR2);
+	imx_uart_ucrs_restore(sport, &old_ucr);
+
+	nbcon_exit_unsafe(wctxt);
 }
 
 /*
@@ -2208,6 +2295,8 @@ imx_uart_console_setup(struct console *co, char *options)
 	if (retval)
 		goto error_console;
 
+	sport->last_putchar_was_newline = true;
+
 	if (options)
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
 	else
@@ -2244,11 +2333,14 @@ imx_uart_console_exit(struct console *co)
 static struct uart_driver imx_uart_uart_driver;
 static struct console imx_uart_console = {
 	.name		= DEV_NAME,
-	.write		= imx_uart_console_write,
+	.write_atomic	= imx_uart_console_write_atomic,
+	.write_thread	= imx_uart_console_write_thread,
+	.device_lock	= imx_uart_console_device_lock,
+	.device_unlock	= imx_uart_console_device_unlock,
+	.flags		= CON_PRINTBUFFER | CON_NBCON,
 	.device		= uart_console_device,
 	.setup		= imx_uart_console_setup,
 	.exit		= imx_uart_console_exit,
-	.flags		= CON_PRINTBUFFER,
 	.index		= -1,
 	.data		= &imx_uart_uart_driver,
 };
@@ -2595,10 +2687,13 @@ static void imx_uart_save_context(struct imx_port *sport)
 	uart_port_unlock_irqrestore(&sport->port, flags);
 }
 
+/* called with irq off */
 static void imx_uart_enable_wakeup(struct imx_port *sport, bool on)
 {
 	u32 ucr3;
 
+	uart_port_lock(&sport->port);
+
 	ucr3 = imx_uart_readl(sport, UCR3);
 	if (on) {
 		imx_uart_writel(sport, USR1_AWAKE, USR1);
@@ -2618,6 +2713,8 @@ static void imx_uart_enable_wakeup(struct imx_port *sport, bool on)
 		}
 		imx_uart_writel(sport, ucr1, UCR1);
 	}
+
+	uart_port_unlock(&sport->port);
 }
 
 static int imx_uart_suspend_noirq(struct device *dev)
@@ -2717,7 +2814,7 @@ static const struct dev_pm_ops imx_uart_pm_ops = {
 
 static struct platform_driver imx_uart_platform_driver = {
 	.probe = imx_uart_probe,
-	.remove_new = imx_uart_remove,
+	.remove = imx_uart_remove,
 
 	.driver = {
 		.name = "imx-uart",
diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
index a0731773ce75..58a3ab030d67 100644
--- a/drivers/tty/serial/lantiq.c
+++ b/drivers/tty/serial/lantiq.c
@@ -915,7 +915,7 @@ MODULE_DEVICE_TABLE(of, ltq_asc_match);
 
 static struct platform_driver lqasc_driver = {
 	.probe		= lqasc_probe,
-	.remove_new	= lqasc_remove,
+	.remove		= lqasc_remove,
 	.driver		= {
 		.name	= DRVNAME,
 		.of_match_table = ltq_asc_match,
diff --git a/drivers/tty/serial/liteuart.c b/drivers/tty/serial/liteuart.c
index 3ce369f76349..6c13cf1ab646 100644
--- a/drivers/tty/serial/liteuart.c
+++ b/drivers/tty/serial/liteuart.c
@@ -353,7 +353,7 @@ MODULE_DEVICE_TABLE(of, liteuart_of_match);
 
 static struct platform_driver liteuart_platform_driver = {
 	.probe = liteuart_probe,
-	.remove_new = liteuart_remove,
+	.remove = liteuart_remove,
 	.driver = {
 		.name = KBUILD_MODNAME,
 		.of_match_table = liteuart_of_match,
diff --git a/drivers/tty/serial/lpc32xx_hs.c b/drivers/tty/serial/lpc32xx_hs.c
index 3e4ac46de1bc..42c5f9bc18b7 100644
--- a/drivers/tty/serial/lpc32xx_hs.c
+++ b/drivers/tty/serial/lpc32xx_hs.c
@@ -695,7 +695,7 @@ MODULE_DEVICE_TABLE(of, serial_hs_lpc32xx_dt_ids);
 
 static struct platform_driver serial_hs_lpc32xx_driver = {
 	.probe		= serial_hs_lpc32xx_probe,
-	.remove_new	= serial_hs_lpc32xx_remove,
+	.remove		= serial_hs_lpc32xx_remove,
 	.suspend	= serial_hs_lpc32xx_suspend,
 	.resume		= serial_hs_lpc32xx_resume,
 	.driver		= {
diff --git a/drivers/tty/serial/ma35d1_serial.c b/drivers/tty/serial/ma35d1_serial.c
index 3b4206e815fe..8dcad52eedfd 100644
--- a/drivers/tty/serial/ma35d1_serial.c
+++ b/drivers/tty/serial/ma35d1_serial.c
@@ -794,7 +794,7 @@ static int ma35d1serial_resume(struct platform_device *dev)
 
 static struct platform_driver ma35d1serial_driver = {
 	.probe      = ma35d1serial_probe,
-	.remove_new = ma35d1serial_remove,
+	.remove     = ma35d1serial_remove,
 	.suspend    = ma35d1serial_suspend,
 	.resume     = ma35d1serial_resume,
 	.driver     = {
diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c
index 58858dd352c5..93e7dda4d39a 100644
--- a/drivers/tty/serial/mcf.c
+++ b/drivers/tty/serial/mcf.c
@@ -616,7 +616,7 @@ static void mcf_remove(struct platform_device *pdev)
 
 static struct platform_driver mcf_platform_driver = {
 	.probe		= mcf_probe,
-	.remove_new	= mcf_remove,
+	.remove		= mcf_remove,
 	.driver		= {
 		.name	= "mcfuart",
 	},
diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c
index 8eb586ac3b0d..a6cb2a535f9d 100644
--- a/drivers/tty/serial/meson_uart.c
+++ b/drivers/tty/serial/meson_uart.c
@@ -842,7 +842,7 @@ MODULE_DEVICE_TABLE(of, meson_uart_dt_match);
 
 static  struct platform_driver meson_uart_platform_driver = {
 	.probe		= meson_uart_probe,
-	.remove_new	= meson_uart_remove,
+	.remove		= meson_uart_remove,
 	.driver		= {
 		.name		= "meson_uart",
 		.of_match_table	= meson_uart_dt_match,
diff --git a/drivers/tty/serial/milbeaut_usio.c b/drivers/tty/serial/milbeaut_usio.c
index fb082ee73d5b..059bea18dbab 100644
--- a/drivers/tty/serial/milbeaut_usio.c
+++ b/drivers/tty/serial/milbeaut_usio.c
@@ -570,7 +570,7 @@ MODULE_DEVICE_TABLE(of, mlb_usio_dt_ids);
 
 static struct platform_driver mlb_usio_driver = {
 	.probe          = mlb_usio_probe,
-	.remove_new     = mlb_usio_remove,
+	.remove         = mlb_usio_remove,
 	.driver         = {
 		.name   = USIO_NAME,
 		.of_match_table = mlb_usio_dt_ids,
diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c
index 95dae5e27b28..f55aa353aed9 100644
--- a/drivers/tty/serial/mpc52xx_uart.c
+++ b/drivers/tty/serial/mpc52xx_uart.c
@@ -1843,7 +1843,7 @@ MODULE_DEVICE_TABLE(of, mpc52xx_uart_of_match);
 
 static struct platform_driver mpc52xx_uart_of_driver = {
 	.probe		= mpc52xx_uart_of_probe,
-	.remove_new	= mpc52xx_uart_of_remove,
+	.remove		= mpc52xx_uart_of_remove,
 #ifdef CONFIG_PM
 	.suspend	= mpc52xx_uart_of_suspend,
 	.resume		= mpc52xx_uart_of_resume,
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index 0a9c5219df88..1b137e068444 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -1894,7 +1894,7 @@ static const struct dev_pm_ops msm_serial_dev_pm_ops = {
 };
 
 static struct platform_driver msm_platform_driver = {
-	.remove_new = msm_serial_remove,
+	.remove = msm_serial_remove,
 	.probe = msm_serial_probe,
 	.driver = {
 		.name = "msm_serial",
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index a1c76565c399..cc65c9fb6446 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -1704,7 +1704,7 @@ static void mxs_auart_remove(struct platform_device *pdev)
 
 static struct platform_driver mxs_auart_driver = {
 	.probe = mxs_auart_probe,
-	.remove_new = mxs_auart_remove,
+	.remove = mxs_auart_remove,
 	.driver = {
 		.name = "mxs-auart",
 		.of_match_table = mxs_auart_dt_ids,
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index d7e172eeaab1..0b85f47ff19e 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -1802,7 +1802,7 @@ MODULE_DEVICE_TABLE(of, omap_serial_of_match);
 
 static struct platform_driver serial_omap_driver = {
 	.probe          = serial_omap_probe,
-	.remove_new     = serial_omap_remove,
+	.remove         = serial_omap_remove,
 	.driver		= {
 		.name	= OMAP_SERIAL_DRIVER_NAME,
 		.pm	= &serial_omap_dev_pm_ops,
diff --git a/drivers/tty/serial/owl-uart.c b/drivers/tty/serial/owl-uart.c
index ecec483d4d59..0542882cfbbe 100644
--- a/drivers/tty/serial/owl-uart.c
+++ b/drivers/tty/serial/owl-uart.c
@@ -730,7 +730,7 @@ static void owl_uart_remove(struct platform_device *pdev)
 
 static struct platform_driver owl_uart_platform_driver = {
 	.probe = owl_uart_probe,
-	.remove_new = owl_uart_remove,
+	.remove = owl_uart_remove,
 	.driver = {
 		.name = "owl-uart",
 		.of_match_table = owl_uart_dt_matches,
diff --git a/drivers/tty/serial/pic32_uart.c b/drivers/tty/serial/pic32_uart.c
index 261c8115a700..14d50bd7f1bd 100644
--- a/drivers/tty/serial/pic32_uart.c
+++ b/drivers/tty/serial/pic32_uart.c
@@ -956,7 +956,7 @@ MODULE_DEVICE_TABLE(of, pic32_serial_dt_ids);
 
 static struct platform_driver pic32_uart_platform_driver = {
 	.probe		= pic32_uart_probe,
-	.remove_new	= pic32_uart_remove,
+	.remove		= pic32_uart_remove,
 	.driver		= {
 		.name	= PIC32_DEV_NAME,
 		.of_match_table	= of_match_ptr(pic32_serial_dt_ids),
diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c
index 8969b11cc0a9..e3a919328695 100644
--- a/drivers/tty/serial/pmac_zilog.c
+++ b/drivers/tty/serial/pmac_zilog.c
@@ -1776,7 +1776,7 @@ static struct macio_driver pmz_driver = {
 
 static struct platform_driver pmz_driver = {
 	.probe		= pmz_attach,
-	.remove_new	= pmz_detach,
+	.remove		= pmz_detach,
 	.driver		= {
 		.name		= "scc",
 	},
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 5dfe4e599ad6..a80ce7aaf309 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -1839,7 +1839,7 @@ static const struct of_device_id qcom_geni_serial_match_table[] = {
 MODULE_DEVICE_TABLE(of, qcom_geni_serial_match_table);
 
 static struct platform_driver qcom_geni_serial_platform_driver = {
-	.remove_new = qcom_geni_serial_remove,
+	.remove = qcom_geni_serial_remove,
 	.probe = qcom_geni_serial_probe,
 	.driver = {
 		.name = "qcom_geni_serial",
diff --git a/drivers/tty/serial/rda-uart.c b/drivers/tty/serial/rda-uart.c
index 663e35e424bd..87fa30d68687 100644
--- a/drivers/tty/serial/rda-uart.c
+++ b/drivers/tty/serial/rda-uart.c
@@ -777,7 +777,7 @@ static void rda_uart_remove(struct platform_device *pdev)
 
 static struct platform_driver rda_uart_platform_driver = {
 	.probe = rda_uart_probe,
-	.remove_new = rda_uart_remove,
+	.remove = rda_uart_remove,
 	.driver = {
 		.name = "rda-uart",
 		.of_match_table = rda_uart_dt_matches,
diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c
index 79c794fa6545..3c34027687d2 100644
--- a/drivers/tty/serial/sa1100.c
+++ b/drivers/tty/serial/sa1100.c
@@ -880,7 +880,7 @@ static void sa1100_serial_remove(struct platform_device *pdev)
 
 static struct platform_driver sa11x0_serial_driver = {
 	.probe		= sa1100_serial_probe,
-	.remove_new	= sa1100_serial_remove,
+	.remove		= sa1100_serial_remove,
 	.suspend	= sa1100_serial_suspend,
 	.resume		= sa1100_serial_resume,
 	.driver		= {
diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 0d184ee2f9ce..210fff7164c1 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -2498,6 +2498,12 @@ static const struct s3c24xx_serial_drv_data exynos850_serial_drv_data = {
 	.fifosize = { 256, 64, 64, 64 },
 };
 
+static const struct s3c24xx_serial_drv_data exynos8895_serial_drv_data = {
+	EXYNOS_COMMON_SERIAL_DRV_DATA,
+	/* samsung,uart-fifosize must be specified in the device tree. */
+	.fifosize = { 0 },
+};
+
 static const struct s3c24xx_serial_drv_data gs101_serial_drv_data = {
 	.info = {
 		.name		= "Google GS101 UART",
@@ -2528,12 +2534,14 @@ static const struct s3c24xx_serial_drv_data gs101_serial_drv_data = {
 #define EXYNOS4210_SERIAL_DRV_DATA (&exynos4210_serial_drv_data)
 #define EXYNOS5433_SERIAL_DRV_DATA (&exynos5433_serial_drv_data)
 #define EXYNOS850_SERIAL_DRV_DATA (&exynos850_serial_drv_data)
+#define EXYNOS8895_SERIAL_DRV_DATA (&exynos8895_serial_drv_data)
 #define GS101_SERIAL_DRV_DATA (&gs101_serial_drv_data)
 
 #else
 #define EXYNOS4210_SERIAL_DRV_DATA NULL
 #define EXYNOS5433_SERIAL_DRV_DATA NULL
 #define EXYNOS850_SERIAL_DRV_DATA NULL
+#define EXYNOS8895_SERIAL_DRV_DATA NULL
 #define GS101_SERIAL_DRV_DATA NULL
 #endif
 
@@ -2623,6 +2631,9 @@ static const struct platform_device_id s3c24xx_serial_driver_ids[] = {
 	}, {
 		.name		= "gs101-uart",
 		.driver_data	= (kernel_ulong_t)GS101_SERIAL_DRV_DATA,
+	}, {
+		.name		= "exynos8895-uart",
+		.driver_data	= (kernel_ulong_t)EXYNOS8895_SERIAL_DRV_DATA,
 	},
 	{ },
 };
@@ -2646,6 +2657,8 @@ static const struct of_device_id s3c24xx_uart_dt_match[] = {
 		.data = ARTPEC8_SERIAL_DRV_DATA },
 	{ .compatible = "google,gs101-uart",
 		.data = GS101_SERIAL_DRV_DATA },
+	{ .compatible = "samsung,exynos8895-uart",
+		.data = EXYNOS8895_SERIAL_DRV_DATA },
 	{},
 };
 MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match);
@@ -2653,7 +2666,7 @@ MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match);
 
 static struct platform_driver samsung_serial_driver = {
 	.probe		= s3c24xx_serial_probe,
-	.remove_new	= s3c24xx_serial_remove,
+	.remove		= s3c24xx_serial_remove,
 	.id_table	= s3c24xx_serial_driver_ids,
 	.driver		= {
 		.name	= "samsung-uart",
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index ad88a33a504f..9d0c971e49f5 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1473,7 +1473,7 @@ static int sc16is7xx_setup_mctrl_ports(struct sc16is7xx_port *s,
 }
 
 static const struct serial_rs485 sc16is7xx_rs485_supported = {
-	.flags = SER_RS485_ENABLED | SER_RS485_RTS_AFTER_SEND,
+	.flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND,
 	.delay_rts_before_send = 1,
 	.delay_rts_after_send = 1,	/* Not supported but keep returning -EINVAL */
 };
diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c
index 6d1d142fd216..4c851dae6624 100644
--- a/drivers/tty/serial/sccnxp.c
+++ b/drivers/tty/serial/sccnxp.c
@@ -1052,7 +1052,7 @@ static struct platform_driver sccnxp_uart_driver = {
 		.name	= SCCNXP_NAME,
 	},
 	.probe		= sccnxp_probe,
-	.remove_new	= sccnxp_remove,
+	.remove		= sccnxp_remove,
 	.id_table	= sccnxp_id_table,
 };
 module_platform_driver(sccnxp_uart_driver);
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index 1183ca54ab92..8004fc00fb9c 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -1648,7 +1648,7 @@ static const struct dev_pm_ops tegra_uart_pm_ops = {
 
 static struct platform_driver tegra_uart_platform_driver = {
 	.probe		= tegra_uart_probe,
-	.remove_new	= tegra_uart_remove,
+	.remove		= tegra_uart_remove,
 	.driver		= {
 		.name	= "serial-tegra",
 		.of_match_table = tegra_uart_of_match,
diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c
index abba39722958..436a559234df 100644
--- a/drivers/tty/serial/serial_txx9.c
+++ b/drivers/tty/serial/serial_txx9.c
@@ -1097,7 +1097,7 @@ static int serial_txx9_resume(struct platform_device *dev)
 
 static struct platform_driver serial_txx9_plat_driver = {
 	.probe		= serial_txx9_probe,
-	.remove_new	= serial_txx9_remove,
+	.remove		= serial_txx9_remove,
 #ifdef CONFIG_PM
 	.suspend	= serial_txx9_suspend,
 	.resume		= serial_txx9_resume,
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index b80e9a528e17..df523c744423 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -3505,7 +3505,7 @@ static SIMPLE_DEV_PM_OPS(sci_dev_pm_ops, sci_suspend, sci_resume);
 
 static struct platform_driver sci_driver = {
 	.probe		= sci_probe,
-	.remove_new	= sci_remove,
+	.remove		= sci_remove,
 	.driver		= {
 		.name	= "sh-sci",
 		.pm	= &sci_dev_pm_ops,
diff --git a/drivers/tty/serial/sifive.c b/drivers/tty/serial/sifive.c
index cbfce65c9d22..5904a2d4cefa 100644
--- a/drivers/tty/serial/sifive.c
+++ b/drivers/tty/serial/sifive.c
@@ -1040,7 +1040,7 @@ MODULE_DEVICE_TABLE(of, sifive_serial_of_match);
 
 static struct platform_driver sifive_serial_platform_driver = {
 	.probe		= sifive_serial_probe,
-	.remove_new	= sifive_serial_remove,
+	.remove		= sifive_serial_remove,
 	.driver		= {
 		.name	= SIFIVE_SERIAL_NAME,
 		.pm = pm_sleep_ptr(&sifive_uart_pm_ops),
diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c
index 3fc54cc02a1f..8c9366321f8e 100644
--- a/drivers/tty/serial/sprd_serial.c
+++ b/drivers/tty/serial/sprd_serial.c
@@ -53,10 +53,12 @@
 #define SPRD_IEN_TX_EMPTY	BIT(1)
 #define SPRD_IEN_BREAK_DETECT	BIT(7)
 #define SPRD_IEN_TIMEOUT	BIT(13)
+#define SPRD_IEN_DATA_TIMEOUT	BIT(17)
 
 /* interrupt clear register */
 #define SPRD_ICLR		0x0014
 #define SPRD_ICLR_TIMEOUT	BIT(13)
+#define SPRD_ICLR_DATA_TIMEOUT	BIT(17)
 
 /* line control register */
 #define SPRD_LCR		0x0018
@@ -102,6 +104,7 @@
 #define SPRD_IMSR_TX_FIFO_EMPTY	BIT(1)
 #define SPRD_IMSR_BREAK_DETECT	BIT(7)
 #define SPRD_IMSR_TIMEOUT	BIT(13)
+#define SPRD_IMSR_DATA_TIMEOUT	BIT(17)
 #define SPRD_DEFAULT_SOURCE_CLK	26000000
 
 #define SPRD_RX_DMA_STEP	1
@@ -118,6 +121,12 @@ struct sprd_uart_dma {
 	bool enable;
 };
 
+struct sprd_uart_data {
+	unsigned int timeout_ien;
+	unsigned int timeout_iclr;
+	unsigned int timeout_imsr;
+};
+
 struct sprd_uart_port {
 	struct uart_port port;
 	char name[16];
@@ -126,6 +135,7 @@ struct sprd_uart_port {
 	struct sprd_uart_dma rx_dma;
 	dma_addr_t pos;
 	unsigned char *rx_buf_tail;
+	const struct sprd_uart_data *pdata;
 };
 
 static struct sprd_uart_port *sprd_port[UART_NR_MAX];
@@ -134,6 +144,18 @@ static int sprd_ports_num;
 static int sprd_start_dma_rx(struct uart_port *port);
 static int sprd_tx_dma_config(struct uart_port *port);
 
+static const struct sprd_uart_data sc9836_data = {
+	.timeout_ien = SPRD_IEN_TIMEOUT,
+	.timeout_iclr = SPRD_ICLR_TIMEOUT,
+	.timeout_imsr = SPRD_IMSR_TIMEOUT,
+};
+
+static const struct sprd_uart_data sc9632_data = {
+	.timeout_ien = SPRD_IEN_DATA_TIMEOUT,
+	.timeout_iclr = SPRD_ICLR_DATA_TIMEOUT,
+	.timeout_imsr = SPRD_IMSR_DATA_TIMEOUT,
+};
+
 static inline unsigned int serial_in(struct uart_port *port,
 				     unsigned int offset)
 {
@@ -637,6 +659,8 @@ static irqreturn_t sprd_handle_irq(int irq, void *dev_id)
 {
 	struct uart_port *port = dev_id;
 	unsigned int ims;
+	struct sprd_uart_port *sp =
+		container_of(port, struct sprd_uart_port, port);
 
 	uart_port_lock(port);
 
@@ -647,14 +671,14 @@ static irqreturn_t sprd_handle_irq(int irq, void *dev_id)
 		return IRQ_NONE;
 	}
 
-	if (ims & SPRD_IMSR_TIMEOUT)
-		serial_out(port, SPRD_ICLR, SPRD_ICLR_TIMEOUT);
+	if (ims & sp->pdata->timeout_imsr)
+		serial_out(port, SPRD_ICLR, sp->pdata->timeout_iclr);
 
 	if (ims & SPRD_IMSR_BREAK_DETECT)
 		serial_out(port, SPRD_ICLR, SPRD_IMSR_BREAK_DETECT);
 
 	if (ims & (SPRD_IMSR_RX_FIFO_FULL | SPRD_IMSR_BREAK_DETECT |
-		   SPRD_IMSR_TIMEOUT))
+		   sp->pdata->timeout_imsr))
 		sprd_rx(port);
 
 	if (ims & SPRD_IMSR_TX_FIFO_EMPTY)
@@ -729,7 +753,7 @@ static int sprd_startup(struct uart_port *port)
 	/* enable interrupt */
 	uart_port_lock_irqsave(port, &flags);
 	ien = serial_in(port, SPRD_IEN);
-	ien |= SPRD_IEN_BREAK_DETECT | SPRD_IEN_TIMEOUT;
+	ien |= SPRD_IEN_BREAK_DETECT | sp->pdata->timeout_ien;
 	if (!sp->rx_dma.enable)
 		ien |= SPRD_IEN_RX_FULL;
 	serial_out(port, SPRD_IEN, ien);
@@ -1184,6 +1208,12 @@ static int sprd_probe(struct platform_device *pdev)
 
 	up->mapbase = res->start;
 
+	sport->pdata = of_device_get_match_data(&pdev->dev);
+	if (!sport->pdata) {
+		dev_err(&pdev->dev, "get match data failed!\n");
+		return -EINVAL;
+	}
+
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
 		return irq;
@@ -1248,14 +1278,15 @@ static int sprd_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(sprd_pm_ops, sprd_suspend, sprd_resume);
 
 static const struct of_device_id serial_ids[] = {
-	{.compatible = "sprd,sc9836-uart",},
+	{.compatible = "sprd,sc9836-uart", .data = &sc9836_data},
+	{.compatible = "sprd,sc9632-uart", .data = &sc9632_data},
 	{}
 };
 MODULE_DEVICE_TABLE(of, serial_ids);
 
 static struct platform_driver sprd_platform_driver = {
 	.probe		= sprd_probe,
-	.remove_new	= sprd_remove,
+	.remove		= sprd_remove,
 	.driver		= {
 		.name	= "sprd_serial",
 		.of_match_table = serial_ids,
diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c
index 8aea59f8ca13..6ed9a327702b 100644
--- a/drivers/tty/serial/st-asc.c
+++ b/drivers/tty/serial/st-asc.c
@@ -934,7 +934,7 @@ static DEFINE_SIMPLE_DEV_PM_OPS(asc_serial_pm_ops, asc_serial_suspend,
 
 static struct platform_driver asc_serial_driver = {
 	.probe		= asc_serial_probe,
-	.remove_new	= asc_serial_remove,
+	.remove		= asc_serial_remove,
 	.driver	= {
 		.name	= DRIVER_NAME,
 		.pm	= pm_sleep_ptr(&asc_serial_pm_ops),
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index e1e7bc04c579..7dc254546075 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -2188,7 +2188,7 @@ static const struct dev_pm_ops stm32_serial_pm_ops = {
 
 static struct platform_driver stm32_serial_driver = {
 	.probe		= stm32_usart_serial_probe,
-	.remove_new	= stm32_usart_serial_remove,
+	.remove		= stm32_usart_serial_remove,
 	.driver	= {
 		.name	= DRIVER_NAME,
 		.pm	= &stm32_serial_pm_ops,
diff --git a/drivers/tty/serial/sunhv.c b/drivers/tty/serial/sunhv.c
index 7f60679fdde1..2b3ec65d595d 100644
--- a/drivers/tty/serial/sunhv.c
+++ b/drivers/tty/serial/sunhv.c
@@ -633,7 +633,7 @@ static struct platform_driver hv_driver = {
 		.of_match_table = hv_match,
 	},
 	.probe		= hv_probe,
-	.remove_new	= hv_remove,
+	.remove		= hv_remove,
 };
 
 static int __init sunhv_init(void)
diff --git a/drivers/tty/serial/sunplus-uart.c b/drivers/tty/serial/sunplus-uart.c
index abf7c449308d..38deee571b0d 100644
--- a/drivers/tty/serial/sunplus-uart.c
+++ b/drivers/tty/serial/sunplus-uart.c
@@ -697,7 +697,7 @@ MODULE_DEVICE_TABLE(of, sp_uart_of_match);
 
 static struct platform_driver sunplus_uart_platform_driver = {
 	.probe		= sunplus_uart_probe,
-	.remove_new	= sunplus_uart_remove,
+	.remove		= sunplus_uart_remove,
 	.driver = {
 		.name	= "sunplus_uart",
 		.of_match_table = sp_uart_of_match,
diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c
index 1acbe2fba746..df906ccf2e8a 100644
--- a/drivers/tty/serial/sunsab.c
+++ b/drivers/tty/serial/sunsab.c
@@ -1100,7 +1100,7 @@ static struct platform_driver sab_driver = {
 		.of_match_table = sab_match,
 	},
 	.probe		= sab_probe,
-	.remove_new	= sab_remove,
+	.remove		= sab_remove,
 };
 
 static int __init sunsab_init(void)
diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c
index 0f463da5e7ce..7f0fef07e141 100644
--- a/drivers/tty/serial/sunsu.c
+++ b/drivers/tty/serial/sunsu.c
@@ -1549,7 +1549,7 @@ static struct platform_driver su_driver = {
 		.of_match_table = su_match,
 	},
 	.probe		= su_probe,
-	.remove_new	= su_remove,
+	.remove		= su_remove,
 };
 
 static int __init sunsu_init(void)
diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c
index 71758ad4241c..0551c24c06f5 100644
--- a/drivers/tty/serial/sunzilog.c
+++ b/drivers/tty/serial/sunzilog.c
@@ -1538,7 +1538,7 @@ static struct platform_driver zs_driver = {
 		.of_match_table = zs_match,
 	},
 	.probe		= zs_probe,
-	.remove_new	= zs_remove,
+	.remove		= zs_remove,
 };
 
 static int __init sunzilog_init(void)
diff --git a/drivers/tty/serial/tegra-tcu.c b/drivers/tty/serial/tegra-tcu.c
index 21ca5fcadf49..7033dbfe8ba1 100644
--- a/drivers/tty/serial/tegra-tcu.c
+++ b/drivers/tty/serial/tegra-tcu.c
@@ -293,7 +293,7 @@ static struct platform_driver tegra_tcu_driver = {
 		.of_match_table = tegra_tcu_match,
 	},
 	.probe = tegra_tcu_probe,
-	.remove_new = tegra_tcu_remove,
+	.remove = tegra_tcu_remove,
 };
 module_platform_driver(tegra_tcu_driver);
 
diff --git a/drivers/tty/serial/timbuart.c b/drivers/tty/serial/timbuart.c
index 43fa0938b5e3..6fa93c3872a7 100644
--- a/drivers/tty/serial/timbuart.c
+++ b/drivers/tty/serial/timbuart.c
@@ -485,7 +485,7 @@ static struct platform_driver timbuart_platform_driver = {
 		.name	= "timb-uart",
 	},
 	.probe		= timbuart_probe,
-	.remove_new	= timbuart_remove,
+	.remove		= timbuart_remove,
 };
 
 module_platform_driver(timbuart_platform_driver);
diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
index 68357ac8ffe3..a41e7fc373b7 100644
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -915,7 +915,7 @@ MODULE_ALIAS("platform:uartlite");
 
 static struct platform_driver ulite_platform_driver = {
 	.probe = ulite_probe,
-	.remove_new = ulite_remove,
+	.remove = ulite_remove,
 	.driver = {
 		.name  = "uartlite",
 		.of_match_table = of_match_ptr(ulite_of_match),
diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
index 4eed909468ff..0613f8c11ab1 100644
--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c
@@ -1484,7 +1484,7 @@ static struct platform_driver ucc_uart_of_driver = {
 		.of_match_table    = ucc_uart_match,
 	},
 	.probe  	= ucc_uart_probe,
-	.remove_new 	= ucc_uart_remove,
+	.remove 	= ucc_uart_remove,
 };
 
 static int __init ucc_uart_init(void)
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 777392914819..beb151be4d32 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -1903,7 +1903,7 @@ static void cdns_uart_remove(struct platform_device *pdev)
 
 static struct platform_driver cdns_uart_platform_driver = {
 	.probe   = cdns_uart_probe,
-	.remove_new = cdns_uart_remove,
+	.remove  = cdns_uart_remove,
 	.driver  = {
 		.name = CDNS_UART_NAME,
 		.of_match_table = cdns_uart_of_match,
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 9771072da177..dcb1769c3625 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -3631,7 +3631,7 @@ static struct ctl_table tty_table[] = {
 		.data		= &tty_ldisc_autoload,
 		.maxlen		= sizeof(tty_ldisc_autoload),
 		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= SYSCTL_ZERO,
 		.extra2		= SYSCTL_ONE,
 	},
diff --git a/include/linux/eeprom_93cx6.h b/include/linux/eeprom_93cx6.h
index c860c72a921d..3a485cc0e0fa 100644
--- a/include/linux/eeprom_93cx6.h
+++ b/include/linux/eeprom_93cx6.h
@@ -11,6 +11,8 @@
 	Supported chipsets: 93c46, 93c56 and 93c66.
  */
 
+#include <linux/bits.h>
+
 /*
  * EEPROM operation defines.
  */
@@ -34,6 +36,7 @@
  * @register_write(struct eeprom_93cx6 *eeprom): handler to
  * write to the eeprom register by using all reg_* fields.
  * @width: eeprom width, should be one of the PCI_EEPROM_WIDTH_* defines
+ * @quirks: eeprom or controller quirks
  * @drive_data: Set if we're driving the data line.
  * @reg_data_in: register field to indicate data input
  * @reg_data_out: register field to indicate data output
@@ -50,6 +53,9 @@ struct eeprom_93cx6 {
 	void (*register_write)(struct eeprom_93cx6 *eeprom);
 
 	int width;
+	unsigned int quirks;
+/* Some EEPROMs require an extra clock cycle before reading */
+#define PCI_EEPROM_QUIRK_EXTRA_READ_CYCLE	BIT(0)
 
 	char drive_data;
 	char reg_data_in;
@@ -71,3 +77,8 @@ extern void eeprom_93cx6_wren(struct eeprom_93cx6 *eeprom, bool enable);
 
 extern void eeprom_93cx6_write(struct eeprom_93cx6 *eeprom,
 			       u8 addr, u16 data);
+
+static inline bool has_quirk_extra_read_cycle(struct eeprom_93cx6 *eeprom)
+{
+	return eeprom->quirks & PCI_EEPROM_QUIRK_EXTRA_READ_CYCLE;
+}
diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h
index 564868bdce89..fd743d4c4b4b 100644
--- a/include/linux/kfifo.h
+++ b/include/linux/kfifo.h
@@ -37,7 +37,6 @@
  */
 
 #include <linux/array_size.h>
-#include <linux/dma-mapping.h>
 #include <linux/spinlock.h>
 #include <linux/stddef.h>
 #include <linux/types.h>
diff --git a/include/linux/platform_data/sa11x0-serial.h b/include/linux/platform_data/sa11x0-serial.h
index 8b79ab08af45..a88096bc74e4 100644
--- a/include/linux/platform_data/sa11x0-serial.h
+++ b/include/linux/platform_data/sa11x0-serial.h
@@ -10,7 +10,6 @@
 #define SA11X0_SERIAL_H
 
 struct uart_port;
-struct uart_info;
 
 /*
  * This is a temporary structure for registering these
diff --git a/samples/kfifo/dma-example.c b/samples/kfifo/dma-example.c
index 48df719dac8c..8076ac410161 100644
--- a/samples/kfifo/dma-example.c
+++ b/samples/kfifo/dma-example.c
@@ -9,6 +9,7 @@
 #include <linux/kfifo.h>
 #include <linux/module.h>
 #include <linux/scatterlist.h>
+#include <linux/dma-mapping.h>
 
 /*
  * This module shows how to handle fifo dma operations.