[PATCH] W1: Move w1 bus master code into 'w1/masters' and move w1 slave code into 'w1/slaves'

Signed-off-by: Ben Gardner <bgardner@wabtec.com>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

6 files changed, 1431 insertions, 0 deletions

diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
new file mode 100644
index 000000000000..51bd64d0e54d
--- /dev/null
+++ b/drivers/w1/masters/Kconfig
@@ -0,0 +1,38 @@
+#
+# 1-wire bus master configuration
+#
+
+menu "1-wire Bus Masters"
+	depends on W1
+
+config W1_MASTER_MATROX
+	tristate "Matrox G400 transport layer for 1-wire"
+	depends on W1 && PCI
+	help
+	  Say Y here if you want to communicate with your 1-wire devices
+	  using Matrox's G400 GPIO pins.
+
+	  This support is also available as a module.  If so, the module
+	  will be called matrox_w1.ko.
+
+config W1_MASTER_DS9490
+	tristate "DS9490R transport layer driver"
+	depends on W1 && USB
+	help
+	  Say Y here if you want to have a driver for DS9490R UWB <-> W1 bridge.
+
+	  This support is also available as a module.  If so, the module
+	  will be called ds9490r.ko.
+
+config W1_MASTER_DS9490_BRIDGE
+	tristate "DS9490R USB <-> W1 transport layer for 1-wire"
+	depends on W1_DS9490
+	help
+	  Say Y here if you want to communicate with your 1-wire devices
+	  using DS9490R USB bridge.
+
+	  This support is also available as a module.  If so, the module
+	  will be called ds_w1_bridge.ko.
+
+endmenu
+
diff --git a/drivers/w1/masters/Makefile b/drivers/w1/masters/Makefile
new file mode 100644
index 000000000000..d9b84e522d6c
--- /dev/null
+++ b/drivers/w1/masters/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for 1-wire bus master drivers.
+#
+
+obj-$(CONFIG_W1_MASTER_MATROX)		+= matrox_w1.o
+
+obj-$(CONFIG_W1_MASTER_DS9490)		+= ds9490r.o
+ds9490r-objs    := dscore.o
+
+obj-$(CONFIG_W1_MASTER_DS9490_BRIDGE)	+= ds_w1_bridge.o
+
diff --git a/drivers/w1/masters/ds_w1_bridge.c b/drivers/w1/masters/ds_w1_bridge.c
new file mode 100644
index 000000000000..5d30783a3eb6
--- /dev/null
+++ b/drivers/w1/masters/ds_w1_bridge.c
@@ -0,0 +1,174 @@
+/*
+ *	ds_w1_bridge.c
+ *
+ * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+
+#include "../w1.h"
+#include "../w1_int.h"
+#include "dscore.h"
+
+static struct ds_device *ds_dev;
+static struct w1_bus_master *ds_bus_master;
+
+static u8 ds9490r_touch_bit(void *data, u8 bit)
+{
+	u8 ret;
+	struct ds_device *dev = data;
+
+	if (ds_touch_bit(dev, bit, &ret))
+		return 0;
+
+	return ret;
+}
+
+static void ds9490r_write_bit(void *data, u8 bit)
+{
+	struct ds_device *dev = data;
+
+	ds_write_bit(dev, bit);
+}
+
+static void ds9490r_write_byte(void *data, u8 byte)
+{
+	struct ds_device *dev = data;
+
+	ds_write_byte(dev, byte);
+}
+
+static u8 ds9490r_read_bit(void *data)
+{
+	struct ds_device *dev = data;
+	int err;
+	u8 bit = 0;
+
+	err = ds_touch_bit(dev, 1, &bit);
+	if (err)
+		return 0;
+	//err = ds_read_bit(dev, &bit);
+	//if (err)
+	//	return 0;
+
+	return bit & 1;
+}
+
+static u8 ds9490r_read_byte(void *data)
+{
+	struct ds_device *dev = data;
+	int err;
+	u8 byte = 0;
+
+	err = ds_read_byte(dev, &byte);
+	if (err)
+		return 0;
+
+	return byte;
+}
+
+static void ds9490r_write_block(void *data, const u8 *buf, int len)
+{
+	struct ds_device *dev = data;
+
+	ds_write_block(dev, (u8 *)buf, len);
+}
+
+static u8 ds9490r_read_block(void *data, u8 *buf, int len)
+{
+	struct ds_device *dev = data;
+	int err;
+
+	err = ds_read_block(dev, buf, len);
+	if (err < 0)
+		return 0;
+
+	return len;
+}
+
+static u8 ds9490r_reset(void *data)
+{
+	struct ds_device *dev = data;
+	struct ds_status st;
+	int err;
+
+	memset(&st, 0, sizeof(st));
+
+	err = ds_reset(dev, &st);
+	if (err)
+		return 1;
+
+	return 0;
+}
+
+static int __devinit ds_w1_init(void)
+{
+	int err;
+
+	ds_bus_master = kmalloc(sizeof(*ds_bus_master), GFP_KERNEL);
+	if (!ds_bus_master) {
+		printk(KERN_ERR "Failed to allocate DS9490R USB<->W1 bus_master structure.\n");
+		return -ENOMEM;
+	}
+
+	ds_dev = ds_get_device();
+	if (!ds_dev) {
+		printk(KERN_ERR "DS9490R is not registered.\n");
+		err =  -ENODEV;
+		goto err_out_free_bus_master;
+	}
+
+	memset(ds_bus_master, 0, sizeof(*ds_bus_master));
+
+	ds_bus_master->data		= ds_dev;
+	ds_bus_master->touch_bit	= &ds9490r_touch_bit;
+	ds_bus_master->read_bit		= &ds9490r_read_bit;
+	ds_bus_master->write_bit	= &ds9490r_write_bit;
+	ds_bus_master->read_byte	= &ds9490r_read_byte;
+	ds_bus_master->write_byte	= &ds9490r_write_byte;
+	ds_bus_master->read_block	= &ds9490r_read_block;
+	ds_bus_master->write_block	= &ds9490r_write_block;
+	ds_bus_master->reset_bus	= &ds9490r_reset;
+
+	err = w1_add_master_device(ds_bus_master);
+	if (err)
+		goto err_out_put_device;
+
+	return 0;
+
+err_out_put_device:
+	ds_put_device(ds_dev);
+err_out_free_bus_master:
+	kfree(ds_bus_master);
+
+	return err;
+}
+
+static void __devexit ds_w1_fini(void)
+{
+	w1_remove_master_device(ds_bus_master);
+	ds_put_device(ds_dev);
+	kfree(ds_bus_master);
+}
+
+module_init(ds_w1_init);
+module_exit(ds_w1_fini);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>");
diff --git a/drivers/w1/masters/dscore.c b/drivers/w1/masters/dscore.c
new file mode 100644
index 000000000000..2cf7776a7080
--- /dev/null
+++ b/drivers/w1/masters/dscore.c
@@ -0,0 +1,795 @@
+/*
+ *	dscore.c
+ *
+ * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/usb.h>
+
+#include "dscore.h"
+
+static struct usb_device_id ds_id_table [] = {
+	{ USB_DEVICE(0x04fa, 0x2490) },
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, ds_id_table);
+
+static int ds_probe(struct usb_interface *, const struct usb_device_id *);
+static void ds_disconnect(struct usb_interface *);
+
+int ds_touch_bit(struct ds_device *, u8, u8 *);
+int ds_read_byte(struct ds_device *, u8 *);
+int ds_read_bit(struct ds_device *, u8 *);
+int ds_write_byte(struct ds_device *, u8);
+int ds_write_bit(struct ds_device *, u8);
+static int ds_start_pulse(struct ds_device *, int);
+int ds_reset(struct ds_device *, struct ds_status *);
+struct ds_device * ds_get_device(void);
+void ds_put_device(struct ds_device *);
+
+static inline void ds_dump_status(unsigned char *, unsigned char *, int);
+static int ds_send_control(struct ds_device *, u16, u16);
+static int ds_send_control_mode(struct ds_device *, u16, u16);
+static int ds_send_control_cmd(struct ds_device *, u16, u16);
+
+
+static struct usb_driver ds_driver = {
+	.name =		"DS9490R",
+	.probe =	ds_probe,
+	.disconnect =	ds_disconnect,
+	.id_table =	ds_id_table,
+};
+
+static struct ds_device *ds_dev;
+
+struct ds_device * ds_get_device(void)
+{
+	if (ds_dev)
+		atomic_inc(&ds_dev->refcnt);
+	return ds_dev;
+}
+
+void ds_put_device(struct ds_device *dev)
+{
+	atomic_dec(&dev->refcnt);
+}
+
+static int ds_send_control_cmd(struct ds_device *dev, u16 value, u16 index)
+{
+	int err;
+
+	err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]),
+			CONTROL_CMD, 0x40, value, index, NULL, 0, 1000);
+	if (err < 0) {
+		printk(KERN_ERR "Failed to send command control message %x.%x: err=%d.\n",
+				value, index, err);
+		return err;
+	}
+
+	return err;
+}
+
+static int ds_send_control_mode(struct ds_device *dev, u16 value, u16 index)
+{
+	int err;
+
+	err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]),
+			MODE_CMD, 0x40, value, index, NULL, 0, 1000);
+	if (err < 0) {
+		printk(KERN_ERR "Failed to send mode control message %x.%x: err=%d.\n",
+				value, index, err);
+		return err;
+	}
+
+	return err;
+}
+
+static int ds_send_control(struct ds_device *dev, u16 value, u16 index)
+{
+	int err;
+
+	err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]),
+			COMM_CMD, 0x40, value, index, NULL, 0, 1000);
+	if (err < 0) {
+		printk(KERN_ERR "Failed to send control message %x.%x: err=%d.\n",
+				value, index, err);
+		return err;
+	}
+
+	return err;
+}
+
+static inline void ds_dump_status(unsigned char *buf, unsigned char *str, int off)
+{
+	printk("%45s: %8x\n", str, buf[off]);
+}
+
+static int ds_recv_status_nodump(struct ds_device *dev, struct ds_status *st,
+				 unsigned char *buf, int size)
+{
+	int count, err;
+
+	memset(st, 0, sizeof(st));
+
+	count = 0;
+	err = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, dev->ep[EP_STATUS]), buf, size, &count, 100);
+	if (err < 0) {
+		printk(KERN_ERR "Failed to read 1-wire data from 0x%x: err=%d.\n", dev->ep[EP_STATUS], err);
+		return err;
+	}
+
+	if (count >= sizeof(*st))
+		memcpy(st, buf, sizeof(*st));
+
+	return count;
+}
+
+static int ds_recv_status(struct ds_device *dev, struct ds_status *st)
+{
+	unsigned char buf[64];
+	int count, err = 0, i;
+
+	memcpy(st, buf, sizeof(*st));
+
+	count = ds_recv_status_nodump(dev, st, buf, sizeof(buf));
+	if (count < 0)
+		return err;
+
+	printk("0x%x: count=%d, status: ", dev->ep[EP_STATUS], count);
+	for (i=0; i<count; ++i)
+		printk("%02x ", buf[i]);
+	printk("\n");
+
+	if (count >= 16) {
+		ds_dump_status(buf, "enable flag", 0);
+		ds_dump_status(buf, "1-wire speed", 1);
+		ds_dump_status(buf, "strong pullup duration", 2);
+		ds_dump_status(buf, "programming pulse duration", 3);
+		ds_dump_status(buf, "pulldown slew rate control", 4);
+		ds_dump_status(buf, "write-1 low time", 5);
+		ds_dump_status(buf, "data sample offset/write-0 recovery time", 6);
+		ds_dump_status(buf, "reserved (test register)", 7);
+		ds_dump_status(buf, "device status flags", 8);
+		ds_dump_status(buf, "communication command byte 1", 9);
+		ds_dump_status(buf, "communication command byte 2", 10);
+		ds_dump_status(buf, "communication command buffer status", 11);
+		ds_dump_status(buf, "1-wire data output buffer status", 12);
+		ds_dump_status(buf, "1-wire data input buffer status", 13);
+		ds_dump_status(buf, "reserved", 14);
+		ds_dump_status(buf, "reserved", 15);
+	}
+
+	memcpy(st, buf, sizeof(*st));
+
+	if (st->status & ST_EPOF) {
+		printk(KERN_INFO "Resetting device after ST_EPOF.\n");
+		err = ds_send_control_cmd(dev, CTL_RESET_DEVICE, 0);
+		if (err)
+			return err;
+		count = ds_recv_status_nodump(dev, st, buf, sizeof(buf));
+		if (count < 0)
+			return err;
+	}
+#if 0
+	if (st->status & ST_IDLE) {
+		printk(KERN_INFO "Resetting pulse after ST_IDLE.\n");
+		err = ds_start_pulse(dev, PULLUP_PULSE_DURATION);
+		if (err)
+			return err;
+	}
+#endif
+
+	return err;
+}
+
+static int ds_recv_data(struct ds_device *dev, unsigned char *buf, int size)
+{
+	int count, err;
+	struct ds_status st;
+
+	count = 0;
+	err = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, dev->ep[EP_DATA_IN]),
+				buf, size, &count, 1000);
+	if (err < 0) {
+		printk(KERN_INFO "Clearing ep0x%x.\n", dev->ep[EP_DATA_IN]);
+		usb_clear_halt(dev->udev, usb_rcvbulkpipe(dev->udev, dev->ep[EP_DATA_IN]));
+		ds_recv_status(dev, &st);
+		return err;
+	}
+
+#if 0
+	{
+		int i;
+
+		printk("%s: count=%d: ", __func__, count);
+		for (i=0; i<count; ++i)
+			printk("%02x ", buf[i]);
+		printk("\n");
+	}
+#endif
+	return count;
+}
+
+static int ds_send_data(struct ds_device *dev, unsigned char *buf, int len)
+{
+	int count, err;
+
+	count = 0;
+	err = usb_bulk_msg(dev->udev, usb_sndbulkpipe(dev->udev, dev->ep[EP_DATA_OUT]), buf, len, &count, 1000);
+	if (err < 0) {
+		printk(KERN_ERR "Failed to read 1-wire data from 0x02: err=%d.\n", err);
+		return err;
+	}
+
+	return err;
+}
+
+#if 0
+
+int ds_stop_pulse(struct ds_device *dev, int limit)
+{
+	struct ds_status st;
+	int count = 0, err = 0;
+	u8 buf[0x20];
+
+	do {
+		err = ds_send_control(dev, CTL_HALT_EXE_IDLE, 0);
+		if (err)
+			break;
+		err = ds_send_control(dev, CTL_RESUME_EXE, 0);
+		if (err)
+			break;
+		err = ds_recv_status_nodump(dev, &st, buf, sizeof(buf));
+		if (err)
+			break;
+
+		if ((st.status & ST_SPUA) == 0) {
+			err = ds_send_control_mode(dev, MOD_PULSE_EN, 0);
+			if (err)
+				break;
+		}
+	} while(++count < limit);
+
+	return err;
+}
+
+int ds_detect(struct ds_device *dev, struct ds_status *st)
+{
+	int err;
+
+	err = ds_send_control_cmd(dev, CTL_RESET_DEVICE, 0);
+	if (err)
+		return err;
+
+	err = ds_send_control(dev, COMM_SET_DURATION | COMM_IM, 0);
+	if (err)
+		return err;
+
+	err = ds_send_control(dev, COMM_SET_DURATION | COMM_IM | COMM_TYPE, 0x40);
+	if (err)
+		return err;
+
+	err = ds_send_control_mode(dev, MOD_PULSE_EN, PULSE_PROG);
+	if (err)
+		return err;
+
+	err = ds_recv_status(dev, st);
+
+	return err;
+}
+
+#endif  /*  0  */
+
+static int ds_wait_status(struct ds_device *dev, struct ds_status *st)
+{
+	u8 buf[0x20];
+	int err, count = 0;
+
+	do {
+		err = ds_recv_status_nodump(dev, st, buf, sizeof(buf));
+#if 0
+		if (err >= 0) {
+			int i;
+			printk("0x%x: count=%d, status: ", dev->ep[EP_STATUS], err);
+			for (i=0; i<err; ++i)
+				printk("%02x ", buf[i]);
+			printk("\n");
+		}
+#endif
+	} while(!(buf[0x08] & 0x20) && !(err < 0) && ++count < 100);
+
+
+	if (((err > 16) && (buf[0x10] & 0x01)) || count >= 100 || err < 0) {
+		ds_recv_status(dev, st);
+		return -1;
+	} else
+		return 0;
+}
+
+int ds_reset(struct ds_device *dev, struct ds_status *st)
+{
+	int err;
+
+	//err = ds_send_control(dev, COMM_1_WIRE_RESET | COMM_F | COMM_IM | COMM_SE, SPEED_FLEXIBLE);
+	err = ds_send_control(dev, 0x43, SPEED_NORMAL);
+	if (err)
+		return err;
+
+	ds_wait_status(dev, st);
+#if 0
+	if (st->command_buffer_status) {
+		printk(KERN_INFO "Short circuit.\n");
+		return -EIO;
+	}
+#endif
+
+	return 0;
+}
+
+#if 0
+int ds_set_speed(struct ds_device *dev, int speed)
+{
+	int err;
+
+	if (speed != SPEED_NORMAL && speed != SPEED_FLEXIBLE && speed != SPEED_OVERDRIVE)
+		return -EINVAL;
+
+	if (speed != SPEED_OVERDRIVE)
+		speed = SPEED_FLEXIBLE;
+
+	speed &= 0xff;
+
+	err = ds_send_control_mode(dev, MOD_1WIRE_SPEED, speed);
+	if (err)
+		return err;
+
+	return err;
+}
+#endif  /*  0  */
+
+static int ds_start_pulse(struct ds_device *dev, int delay)
+{
+	int err;
+	u8 del = 1 + (u8)(delay >> 4);
+	struct ds_status st;
+
+#if 0
+	err = ds_stop_pulse(dev, 10);
+	if (err)
+		return err;
+
+	err = ds_send_control_mode(dev, MOD_PULSE_EN, PULSE_SPUE);
+	if (err)
+		return err;
+#endif
+	err = ds_send_control(dev, COMM_SET_DURATION | COMM_IM, del);
+	if (err)
+		return err;
+
+	err = ds_send_control(dev, COMM_PULSE | COMM_IM | COMM_F, 0);
+	if (err)
+		return err;
+
+	mdelay(delay);
+
+	ds_wait_status(dev, &st);
+
+	return err;
+}
+
+int ds_touch_bit(struct ds_device *dev, u8 bit, u8 *tbit)
+{
+	int err, count;
+	struct ds_status st;
+	u16 value = (COMM_BIT_IO | COMM_IM) | ((bit) ? COMM_D : 0);
+	u16 cmd;
+
+	err = ds_send_control(dev, value, 0);
+	if (err)
+		return err;
+
+	count = 0;
+	do {
+		err = ds_wait_status(dev, &st);
+		if (err)
+			return err;
+
+		cmd = st.command0 | (st.command1 << 8);
+	} while (cmd != value && ++count < 10);
+
+	if (err < 0 || count >= 10) {
+		printk(KERN_ERR "Failed to obtain status.\n");
+		return -EINVAL;
+	}
+
+	err = ds_recv_data(dev, tbit, sizeof(*tbit));
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+int ds_write_bit(struct ds_device *dev, u8 bit)
+{
+	int err;
+	struct ds_status st;
+
+	err = ds_send_control(dev, COMM_BIT_IO | COMM_IM | (bit) ? COMM_D : 0, 0);
+	if (err)
+		return err;
+
+	ds_wait_status(dev, &st);
+
+	return 0;
+}
+
+int ds_write_byte(struct ds_device *dev, u8 byte)
+{
+	int err;
+	struct ds_status st;
+	u8 rbyte;
+
+	err = ds_send_control(dev, COMM_BYTE_IO | COMM_IM | COMM_SPU, byte);
+	if (err)
+		return err;
+
+	err = ds_wait_status(dev, &st);
+	if (err)
+		return err;
+
+	err = ds_recv_data(dev, &rbyte, sizeof(rbyte));
+	if (err < 0)
+		return err;
+
+	ds_start_pulse(dev, PULLUP_PULSE_DURATION);
+
+	return !(byte == rbyte);
+}
+
+int ds_read_bit(struct ds_device *dev, u8 *bit)
+{
+	int err;
+
+	err = ds_send_control_mode(dev, MOD_PULSE_EN, PULSE_SPUE);
+	if (err)
+		return err;
+
+	err = ds_send_control(dev, COMM_BIT_IO | COMM_IM | COMM_SPU | COMM_D, 0);
+	if (err)
+		return err;
+
+	err = ds_recv_data(dev, bit, sizeof(*bit));
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+int ds_read_byte(struct ds_device *dev, u8 *byte)
+{
+	int err;
+	struct ds_status st;
+
+	err = ds_send_control(dev, COMM_BYTE_IO | COMM_IM , 0xff);
+	if (err)
+		return err;
+
+	ds_wait_status(dev, &st);
+
+	err = ds_recv_data(dev, byte, sizeof(*byte));
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+int ds_read_block(struct ds_device *dev, u8 *buf, int len)
+{
+	struct ds_status st;
+	int err;
+
+	if (len > 64*1024)
+		return -E2BIG;
+
+	memset(buf, 0xFF, len);
+
+	err = ds_send_data(dev, buf, len);
+	if (err < 0)
+		return err;
+
+	err = ds_send_control(dev, COMM_BLOCK_IO | COMM_IM | COMM_SPU, len);
+	if (err)
+		return err;
+
+	ds_wait_status(dev, &st);
+
+	memset(buf, 0x00, len);
+	err = ds_recv_data(dev, buf, len);
+
+	return err;
+}
+
+int ds_write_block(struct ds_device *dev, u8 *buf, int len)
+{
+	int err;
+	struct ds_status st;
+
+	err = ds_send_data(dev, buf, len);
+	if (err < 0)
+		return err;
+
+	ds_wait_status(dev, &st);
+
+	err = ds_send_control(dev, COMM_BLOCK_IO | COMM_IM | COMM_SPU, len);
+	if (err)
+		return err;
+
+	ds_wait_status(dev, &st);
+
+	err = ds_recv_data(dev, buf, len);
+	if (err < 0)
+		return err;
+
+	ds_start_pulse(dev, PULLUP_PULSE_DURATION);
+
+	return !(err == len);
+}
+
+#if 0
+
+int ds_search(struct ds_device *dev, u64 init, u64 *buf, u8 id_number, int conditional_search)
+{
+	int err;
+	u16 value, index;
+	struct ds_status st;
+
+	memset(buf, 0, sizeof(buf));
+
+	err = ds_send_data(ds_dev, (unsigned char *)&init, 8);
+	if (err)
+		return err;
+
+	ds_wait_status(ds_dev, &st);
+
+	value = COMM_SEARCH_ACCESS | COMM_IM | COMM_SM | COMM_F | COMM_RTS;
+	index = (conditional_search ? 0xEC : 0xF0) | (id_number << 8);
+	err = ds_send_control(ds_dev, value, index);
+	if (err)
+		return err;
+
+	ds_wait_status(ds_dev, &st);
+
+	err = ds_recv_data(ds_dev, (unsigned char *)buf, 8*id_number);
+	if (err < 0)
+		return err;
+
+	return err/8;
+}
+
+int ds_match_access(struct ds_device *dev, u64 init)
+{
+	int err;
+	struct ds_status st;
+
+	err = ds_send_data(dev, (unsigned char *)&init, sizeof(init));
+	if (err)
+		return err;
+
+	ds_wait_status(dev, &st);
+
+	err = ds_send_control(dev, COMM_MATCH_ACCESS | COMM_IM | COMM_RST, 0x0055);
+	if (err)
+		return err;
+
+	ds_wait_status(dev, &st);
+
+	return 0;
+}
+
+int ds_set_path(struct ds_device *dev, u64 init)
+{
+	int err;
+	struct ds_status st;
+	u8 buf[9];
+
+	memcpy(buf, &init, 8);
+	buf[8] = BRANCH_MAIN;
+
+	err = ds_send_data(dev, buf, sizeof(buf));
+	if (err)
+		return err;
+
+	ds_wait_status(dev, &st);
+
+	err = ds_send_control(dev, COMM_SET_PATH | COMM_IM | COMM_RST, 0);
+	if (err)
+		return err;
+
+	ds_wait_status(dev, &st);
+
+	return 0;
+}
+
+#endif  /*  0  */
+
+static int ds_probe(struct usb_interface *intf,
+		    const struct usb_device_id *udev_id)
+{
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct usb_endpoint_descriptor *endpoint;
+	struct usb_host_interface *iface_desc;
+	int i, err;
+
+	ds_dev = kmalloc(sizeof(struct ds_device), GFP_KERNEL);
+	if (!ds_dev) {
+		printk(KERN_INFO "Failed to allocate new DS9490R structure.\n");
+		return -ENOMEM;
+	}
+
+	ds_dev->udev = usb_get_dev(udev);
+	usb_set_intfdata(intf, ds_dev);
+
+	err = usb_set_interface(ds_dev->udev, intf->altsetting[0].desc.bInterfaceNumber, 3);
+	if (err) {
+		printk(KERN_ERR "Failed to set alternative setting 3 for %d interface: err=%d.\n",
+				intf->altsetting[0].desc.bInterfaceNumber, err);
+		return err;
+	}
+
+	err = usb_reset_configuration(ds_dev->udev);
+	if (err) {
+		printk(KERN_ERR "Failed to reset configuration: err=%d.\n", err);
+		return err;
+	}
+
+	iface_desc = &intf->altsetting[0];
+	if (iface_desc->desc.bNumEndpoints != NUM_EP-1) {
+		printk(KERN_INFO "Num endpoints=%d. It is not DS9490R.\n", iface_desc->desc.bNumEndpoints);
+		return -ENODEV;
+	}
+
+	atomic_set(&ds_dev->refcnt, 0);
+	memset(ds_dev->ep, 0, sizeof(ds_dev->ep));
+
+	/*
+	 * This loop doesn'd show control 0 endpoint,
+	 * so we will fill only 1-3 endpoints entry.
+	 */
+	for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
+		endpoint = &iface_desc->endpoint[i].desc;
+
+		ds_dev->ep[i+1] = endpoint->bEndpointAddress;
+
+		printk("%d: addr=%x, size=%d, dir=%s, type=%x\n",
+			i, endpoint->bEndpointAddress, le16_to_cpu(endpoint->wMaxPacketSize),
+			(endpoint->bEndpointAddress & USB_DIR_IN)?"IN":"OUT",
+			endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK);
+	}
+
+#if 0
+	{
+		int err, i;
+		u64 buf[3];
+		u64 init=0xb30000002078ee81ull;
+		struct ds_status st;
+
+		ds_reset(ds_dev, &st);
+		err = ds_search(ds_dev, init, buf, 3, 0);
+		if (err < 0)
+			return err;
+		for (i=0; i<err; ++i)
+			printk("%d: %llx\n", i, buf[i]);
+
+		printk("Resetting...\n");
+		ds_reset(ds_dev, &st);
+		printk("Setting path for %llx.\n", init);
+		err = ds_set_path(ds_dev, init);
+		if (err)
+			return err;
+		printk("Calling MATCH_ACCESS.\n");
+		err = ds_match_access(ds_dev, init);
+		if (err)
+			return err;
+
+		printk("Searching the bus...\n");
+		err = ds_search(ds_dev, init, buf, 3, 0);
+
+		printk("ds_search() returned %d\n", err);
+
+		if (err < 0)
+			return err;
+		for (i=0; i<err; ++i)
+			printk("%d: %llx\n", i, buf[i]);
+
+		return 0;
+	}
+#endif
+
+	return 0;
+}
+
+static void ds_disconnect(struct usb_interface *intf)
+{
+	struct ds_device *dev;
+
+	dev = usb_get_intfdata(intf);
+	usb_set_intfdata(intf, NULL);
+
+	while (atomic_read(&dev->refcnt)) {
+		printk(KERN_INFO "Waiting for DS to become free: refcnt=%d.\n",
+				atomic_read(&dev->refcnt));
+
+		if (msleep_interruptible(1000))
+			flush_signals(current);
+	}
+
+	usb_put_dev(dev->udev);
+	kfree(dev);
+	ds_dev = NULL;
+}
+
+static int ds_init(void)
+{
+	int err;
+
+	err = usb_register(&ds_driver);
+	if (err) {
+		printk(KERN_INFO "Failed to register DS9490R USB device: err=%d.\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static void ds_fini(void)
+{
+	usb_deregister(&ds_driver);
+}
+
+module_init(ds_init);
+module_exit(ds_fini);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>");
+
+EXPORT_SYMBOL(ds_touch_bit);
+EXPORT_SYMBOL(ds_read_byte);
+EXPORT_SYMBOL(ds_read_bit);
+EXPORT_SYMBOL(ds_read_block);
+EXPORT_SYMBOL(ds_write_byte);
+EXPORT_SYMBOL(ds_write_bit);
+EXPORT_SYMBOL(ds_write_block);
+EXPORT_SYMBOL(ds_reset);
+EXPORT_SYMBOL(ds_get_device);
+EXPORT_SYMBOL(ds_put_device);
+
+/*
+ * This functions can be used for EEPROM programming,
+ * when driver will be included into mainline this will
+ * require uncommenting.
+ */
+#if 0
+EXPORT_SYMBOL(ds_start_pulse);
+EXPORT_SYMBOL(ds_set_speed);
+EXPORT_SYMBOL(ds_detect);
+EXPORT_SYMBOL(ds_stop_pulse);
+EXPORT_SYMBOL(ds_search);
+#endif
diff --git a/drivers/w1/masters/dscore.h b/drivers/w1/masters/dscore.h
new file mode 100644
index 000000000000..6cf5671d6ebe
--- /dev/null
+++ b/drivers/w1/masters/dscore.h
@@ -0,0 +1,166 @@
+/*
+ *	dscore.h
+ *
+ * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __DSCORE_H
+#define __DSCORE_H
+
+#include <linux/usb.h>
+#include <asm/atomic.h>
+
+/* COMMAND TYPE CODES */
+#define CONTROL_CMD			0x00
+#define COMM_CMD			0x01
+#define MODE_CMD			0x02
+
+/* CONTROL COMMAND CODES */
+#define CTL_RESET_DEVICE		0x0000
+#define CTL_START_EXE			0x0001
+#define CTL_RESUME_EXE			0x0002
+#define CTL_HALT_EXE_IDLE		0x0003
+#define CTL_HALT_EXE_DONE		0x0004
+#define CTL_FLUSH_COMM_CMDS		0x0007
+#define CTL_FLUSH_RCV_BUFFER		0x0008
+#define CTL_FLUSH_XMT_BUFFER		0x0009
+#define CTL_GET_COMM_CMDS		0x000A
+
+/* MODE COMMAND CODES */
+#define MOD_PULSE_EN			0x0000
+#define MOD_SPEED_CHANGE_EN		0x0001
+#define MOD_1WIRE_SPEED			0x0002
+#define MOD_STRONG_PU_DURATION		0x0003
+#define MOD_PULLDOWN_SLEWRATE		0x0004
+#define MOD_PROG_PULSE_DURATION		0x0005
+#define MOD_WRITE1_LOWTIME		0x0006
+#define MOD_DSOW0_TREC			0x0007
+
+/* COMMUNICATION COMMAND CODES */
+#define COMM_ERROR_ESCAPE		0x0601
+#define COMM_SET_DURATION		0x0012
+#define COMM_BIT_IO			0x0020
+#define COMM_PULSE			0x0030
+#define COMM_1_WIRE_RESET		0x0042
+#define COMM_BYTE_IO			0x0052
+#define COMM_MATCH_ACCESS		0x0064
+#define COMM_BLOCK_IO			0x0074
+#define COMM_READ_STRAIGHT		0x0080
+#define COMM_DO_RELEASE			0x6092
+#define COMM_SET_PATH			0x00A2
+#define COMM_WRITE_SRAM_PAGE		0x00B2
+#define COMM_WRITE_EPROM		0x00C4
+#define COMM_READ_CRC_PROT_PAGE		0x00D4
+#define COMM_READ_REDIRECT_PAGE_CRC	0x21E4
+#define COMM_SEARCH_ACCESS		0x00F4
+
+/* Communication command bits */
+#define COMM_TYPE			0x0008
+#define COMM_SE				0x0008
+#define COMM_D				0x0008
+#define COMM_Z				0x0008
+#define COMM_CH				0x0008
+#define COMM_SM				0x0008
+#define COMM_R				0x0008
+#define COMM_IM				0x0001
+
+#define COMM_PS				0x4000
+#define COMM_PST			0x4000
+#define COMM_CIB			0x4000
+#define COMM_RTS			0x4000
+#define COMM_DT				0x2000
+#define COMM_SPU			0x1000
+#define COMM_F				0x0800
+#define COMM_NTP			0x0400
+#define COMM_ICP			0x0200
+#define COMM_RST			0x0100
+
+#define PULSE_PROG			0x01
+#define PULSE_SPUE			0x02
+
+#define BRANCH_MAIN			0xCC
+#define BRANCH_AUX			0x33
+
+/*
+ * Duration of the strong pull-up pulse in milliseconds.
+ */
+#define PULLUP_PULSE_DURATION		750
+
+/* Status flags */
+#define ST_SPUA				0x01  /* Strong Pull-up is active */
+#define ST_PRGA				0x02  /* 12V programming pulse is being generated */
+#define ST_12VP				0x04  /* external 12V programming voltage is present */
+#define ST_PMOD				0x08  /* DS2490 powered from USB and external sources */
+#define ST_HALT				0x10  /* DS2490 is currently halted */
+#define ST_IDLE				0x20  /* DS2490 is currently idle */
+#define ST_EPOF				0x80
+
+#define SPEED_NORMAL			0x00
+#define SPEED_FLEXIBLE			0x01
+#define SPEED_OVERDRIVE			0x02
+
+#define NUM_EP				4
+#define EP_CONTROL			0
+#define EP_STATUS			1
+#define EP_DATA_OUT			2
+#define EP_DATA_IN			3
+
+struct ds_device
+{
+	struct usb_device	*udev;
+	struct usb_interface	*intf;
+
+	int			ep[NUM_EP];
+
+	atomic_t		refcnt;
+};
+
+struct ds_status
+{
+	u8			enable;
+	u8			speed;
+	u8			pullup_dur;
+	u8			ppuls_dur;
+	u8			pulldown_slew;
+	u8			write1_time;
+	u8			write0_time;
+	u8			reserved0;
+	u8			status;
+	u8			command0;
+	u8			command1;
+	u8			command_buffer_status;
+	u8			data_out_buffer_status;
+	u8			data_in_buffer_status;
+	u8			reserved1;
+	u8			reserved2;
+
+};
+
+int ds_touch_bit(struct ds_device *, u8, u8 *);
+int ds_read_byte(struct ds_device *, u8 *);
+int ds_read_bit(struct ds_device *, u8 *);
+int ds_write_byte(struct ds_device *, u8);
+int ds_write_bit(struct ds_device *, u8);
+int ds_reset(struct ds_device *, struct ds_status *);
+struct ds_device * ds_get_device(void);
+void ds_put_device(struct ds_device *);
+int ds_write_block(struct ds_device *, u8 *, int);
+int ds_read_block(struct ds_device *, u8 *, int);
+
+#endif /* __DSCORE_H */
+
diff --git a/drivers/w1/masters/matrox_w1.c b/drivers/w1/masters/matrox_w1.c
new file mode 100644
index 000000000000..591809cbbb97
--- /dev/null
+++ b/drivers/w1/masters/matrox_w1.c
@@ -0,0 +1,247 @@
+/*
+ *	matrox_w1.c
+ *
+ * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <asm/types.h>
+#include <asm/atomic.h>
+#include <asm/io.h>
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/timer.h>
+#include <linux/slab.h>
+#include <linux/pci_ids.h>
+#include <linux/pci.h>
+#include <linux/timer.h>
+
+#include "../w1.h"
+#include "../w1_int.h"
+#include "../w1_log.h"
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>");
+MODULE_DESCRIPTION("Driver for transport(Dallas 1-wire prtocol) over VGA DDC(matrox gpio).");
+
+static struct pci_device_id matrox_w1_tbl[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G400) },
+	{ },
+};
+MODULE_DEVICE_TABLE(pci, matrox_w1_tbl);
+
+static int __devinit matrox_w1_probe(struct pci_dev *, const struct pci_device_id *);
+static void __devexit matrox_w1_remove(struct pci_dev *);
+
+static struct pci_driver matrox_w1_pci_driver = {
+	.name = "matrox_w1",
+	.id_table = matrox_w1_tbl,
+	.probe = matrox_w1_probe,
+	.remove = __devexit_p(matrox_w1_remove),
+};
+
+/*
+ * Matrox G400 DDC registers.
+ */
+
+#define MATROX_G400_DDC_CLK		(1<<4)
+#define MATROX_G400_DDC_DATA		(1<<1)
+
+#define MATROX_BASE			0x3C00
+#define MATROX_STATUS			0x1e14
+
+#define MATROX_PORT_INDEX_OFFSET	0x00
+#define MATROX_PORT_DATA_OFFSET		0x0A
+
+#define MATROX_GET_CONTROL		0x2A
+#define MATROX_GET_DATA			0x2B
+#define MATROX_CURSOR_CTL		0x06
+
+struct matrox_device
+{
+	void __iomem *base_addr;
+	void __iomem *port_index;
+	void __iomem *port_data;
+	u8 data_mask;
+
+	unsigned long phys_addr;
+	void __iomem *virt_addr;
+	unsigned long found;
+
+	struct w1_bus_master *bus_master;
+};
+
+static u8 matrox_w1_read_ddc_bit(void *);
+static void matrox_w1_write_ddc_bit(void *, u8);
+
+/*
+ * These functions read and write DDC Data bit.
+ *
+ * Using tristate pins, since i can't find any open-drain pin in whole motherboard.
+ * Unfortunately we can't connect to Intel's 82801xx IO controller
+ * since we don't know motherboard schema, wich has pretty unused(may be not) GPIO.
+ *
+ * I've heard that PIIX also has open drain pin.
+ *
+ * Port mapping.
+ */
+static __inline__ u8 matrox_w1_read_reg(struct matrox_device *dev, u8 reg)
+{
+	u8 ret;
+
+	writeb(reg, dev->port_index);
+	ret = readb(dev->port_data);
+	barrier();
+
+	return ret;
+}
+
+static __inline__ void matrox_w1_write_reg(struct matrox_device *dev, u8 reg, u8 val)
+{
+	writeb(reg, dev->port_index);
+	writeb(val, dev->port_data);
+	wmb();
+}
+
+static void matrox_w1_write_ddc_bit(void *data, u8 bit)
+{
+	u8 ret;
+	struct matrox_device *dev = data;
+
+	if (bit)
+		bit = 0;
+	else
+		bit = dev->data_mask;
+
+	ret = matrox_w1_read_reg(dev, MATROX_GET_CONTROL);
+	matrox_w1_write_reg(dev, MATROX_GET_CONTROL, ((ret & ~dev->data_mask) | bit));
+	matrox_w1_write_reg(dev, MATROX_GET_DATA, 0x00);
+}
+
+static u8 matrox_w1_read_ddc_bit(void *data)
+{
+	u8 ret;
+	struct matrox_device *dev = data;
+
+	ret = matrox_w1_read_reg(dev, MATROX_GET_DATA);
+
+	return ret;
+}
+
+static void matrox_w1_hw_init(struct matrox_device *dev)
+{
+	matrox_w1_write_reg(dev, MATROX_GET_DATA, 0xFF);
+	matrox_w1_write_reg(dev, MATROX_GET_CONTROL, 0x00);
+}
+
+static int __devinit matrox_w1_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	struct matrox_device *dev;
+	int err;
+
+	assert(pdev != NULL);
+	assert(ent != NULL);
+
+	if (pdev->vendor != PCI_VENDOR_ID_MATROX || pdev->device != PCI_DEVICE_ID_MATROX_G400)
+		return -ENODEV;
+
+	dev = kmalloc(sizeof(struct matrox_device) +
+		       sizeof(struct w1_bus_master), GFP_KERNEL);
+	if (!dev) {
+		dev_err(&pdev->dev,
+			"%s: Failed to create new matrox_device object.\n",
+			__func__);
+		return -ENOMEM;
+	}
+
+	memset(dev, 0, sizeof(struct matrox_device) + sizeof(struct w1_bus_master));
+
+	dev->bus_master = (struct w1_bus_master *)(dev + 1);
+
+	/*
+	 * True for G400, for some other we need resource 0, see drivers/video/matrox/matroxfb_base.c
+	 */
+
+	dev->phys_addr = pci_resource_start(pdev, 1);
+
+	dev->virt_addr = ioremap_nocache(dev->phys_addr, 16384);
+	if (!dev->virt_addr) {
+		dev_err(&pdev->dev, "%s: failed to ioremap(0x%lx, %d).\n",
+			__func__, dev->phys_addr, 16384);
+		err = -EIO;
+		goto err_out_free_device;
+	}
+
+	dev->base_addr = dev->virt_addr + MATROX_BASE;
+	dev->port_index = dev->base_addr + MATROX_PORT_INDEX_OFFSET;
+	dev->port_data = dev->base_addr + MATROX_PORT_DATA_OFFSET;
+	dev->data_mask = (MATROX_G400_DDC_DATA);
+
+	matrox_w1_hw_init(dev);
+
+	dev->bus_master->data = dev;
+	dev->bus_master->read_bit = &matrox_w1_read_ddc_bit;
+	dev->bus_master->write_bit = &matrox_w1_write_ddc_bit;
+
+	err = w1_add_master_device(dev->bus_master);
+	if (err)
+		goto err_out_free_device;
+
+	pci_set_drvdata(pdev, dev);
+
+	dev->found = 1;
+
+	dev_info(&pdev->dev, "Matrox G400 GPIO transport layer for 1-wire.\n");
+
+	return 0;
+
+err_out_free_device:
+	kfree(dev);
+
+	return err;
+}
+
+static void __devexit matrox_w1_remove(struct pci_dev *pdev)
+{
+	struct matrox_device *dev = pci_get_drvdata(pdev);
+
+	assert(dev != NULL);
+
+	if (dev->found) {
+		w1_remove_master_device(dev->bus_master);
+		iounmap(dev->virt_addr);
+	}
+	kfree(dev);
+}
+
+static int __init matrox_w1_init(void)
+{
+	return pci_register_driver(&matrox_w1_pci_driver);
+}
+
+static void __exit matrox_w1_fini(void)
+{
+	pci_unregister_driver(&matrox_w1_pci_driver);
+}
+
+module_init(matrox_w1_init);
+module_exit(matrox_w1_fini);