From bd529cfb40c427d5b5aae0d315afb9f0a1da5e76 Mon Sep 17 00:00:00 2001 From: Evgeniy Polyakov Date: Tue, 6 Dec 2005 13:38:28 +0300 Subject: [PATCH] W1: Move w1 bus master code into 'w1/masters' and move w1 slave code into 'w1/slaves' Signed-off-by: Ben Gardner Signed-off-by: Evgeniy Polyakov Signed-off-by: Greg Kroah-Hartman --- drivers/w1/masters/Kconfig | 38 ++ drivers/w1/masters/Makefile | 11 + drivers/w1/masters/ds_w1_bridge.c | 174 +++++++++ drivers/w1/masters/dscore.c | 795 ++++++++++++++++++++++++++++++++++++++ drivers/w1/masters/dscore.h | 166 ++++++++ drivers/w1/masters/matrox_w1.c | 247 ++++++++++++ 6 files changed, 1431 insertions(+) create mode 100644 drivers/w1/masters/Kconfig create mode 100644 drivers/w1/masters/Makefile create mode 100644 drivers/w1/masters/ds_w1_bridge.c create mode 100644 drivers/w1/masters/dscore.c create mode 100644 drivers/w1/masters/dscore.h create mode 100644 drivers/w1/masters/matrox_w1.c (limited to 'drivers/w1/masters') diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig new file mode 100644 index 000000000000..51bd64d0e54d --- /dev/null +++ b/drivers/w1/masters/Kconfig @@ -0,0 +1,38 @@ +# +# 1-wire bus master configuration +# + +menu "1-wire Bus Masters" + depends on W1 + +config W1_MASTER_MATROX + tristate "Matrox G400 transport layer for 1-wire" + depends on W1 && PCI + help + Say Y here if you want to communicate with your 1-wire devices + using Matrox's G400 GPIO pins. + + This support is also available as a module. If so, the module + will be called matrox_w1.ko. + +config W1_MASTER_DS9490 + tristate "DS9490R transport layer driver" + depends on W1 && USB + help + Say Y here if you want to have a driver for DS9490R UWB <-> W1 bridge. + + This support is also available as a module. If so, the module + will be called ds9490r.ko. + +config W1_MASTER_DS9490_BRIDGE + tristate "DS9490R USB <-> W1 transport layer for 1-wire" + depends on W1_DS9490 + help + Say Y here if you want to communicate with your 1-wire devices + using DS9490R USB bridge. + + This support is also available as a module. If so, the module + will be called ds_w1_bridge.ko. + +endmenu + diff --git a/drivers/w1/masters/Makefile b/drivers/w1/masters/Makefile new file mode 100644 index 000000000000..d9b84e522d6c --- /dev/null +++ b/drivers/w1/masters/Makefile @@ -0,0 +1,11 @@ +# +# Makefile for 1-wire bus master drivers. +# + +obj-$(CONFIG_W1_MASTER_MATROX) += matrox_w1.o + +obj-$(CONFIG_W1_MASTER_DS9490) += ds9490r.o +ds9490r-objs := dscore.o + +obj-$(CONFIG_W1_MASTER_DS9490_BRIDGE) += ds_w1_bridge.o + diff --git a/drivers/w1/masters/ds_w1_bridge.c b/drivers/w1/masters/ds_w1_bridge.c new file mode 100644 index 000000000000..5d30783a3eb6 --- /dev/null +++ b/drivers/w1/masters/ds_w1_bridge.c @@ -0,0 +1,174 @@ +/* + * ds_w1_bridge.c + * + * Copyright (c) 2004 Evgeniy Polyakov + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include + +#include "../w1.h" +#include "../w1_int.h" +#include "dscore.h" + +static struct ds_device *ds_dev; +static struct w1_bus_master *ds_bus_master; + +static u8 ds9490r_touch_bit(void *data, u8 bit) +{ + u8 ret; + struct ds_device *dev = data; + + if (ds_touch_bit(dev, bit, &ret)) + return 0; + + return ret; +} + +static void ds9490r_write_bit(void *data, u8 bit) +{ + struct ds_device *dev = data; + + ds_write_bit(dev, bit); +} + +static void ds9490r_write_byte(void *data, u8 byte) +{ + struct ds_device *dev = data; + + ds_write_byte(dev, byte); +} + +static u8 ds9490r_read_bit(void *data) +{ + struct ds_device *dev = data; + int err; + u8 bit = 0; + + err = ds_touch_bit(dev, 1, &bit); + if (err) + return 0; + //err = ds_read_bit(dev, &bit); + //if (err) + // return 0; + + return bit & 1; +} + +static u8 ds9490r_read_byte(void *data) +{ + struct ds_device *dev = data; + int err; + u8 byte = 0; + + err = ds_read_byte(dev, &byte); + if (err) + return 0; + + return byte; +} + +static void ds9490r_write_block(void *data, const u8 *buf, int len) +{ + struct ds_device *dev = data; + + ds_write_block(dev, (u8 *)buf, len); +} + +static u8 ds9490r_read_block(void *data, u8 *buf, int len) +{ + struct ds_device *dev = data; + int err; + + err = ds_read_block(dev, buf, len); + if (err < 0) + return 0; + + return len; +} + +static u8 ds9490r_reset(void *data) +{ + struct ds_device *dev = data; + struct ds_status st; + int err; + + memset(&st, 0, sizeof(st)); + + err = ds_reset(dev, &st); + if (err) + return 1; + + return 0; +} + +static int __devinit ds_w1_init(void) +{ + int err; + + ds_bus_master = kmalloc(sizeof(*ds_bus_master), GFP_KERNEL); + if (!ds_bus_master) { + printk(KERN_ERR "Failed to allocate DS9490R USB<->W1 bus_master structure.\n"); + return -ENOMEM; + } + + ds_dev = ds_get_device(); + if (!ds_dev) { + printk(KERN_ERR "DS9490R is not registered.\n"); + err = -ENODEV; + goto err_out_free_bus_master; + } + + memset(ds_bus_master, 0, sizeof(*ds_bus_master)); + + ds_bus_master->data = ds_dev; + ds_bus_master->touch_bit = &ds9490r_touch_bit; + ds_bus_master->read_bit = &ds9490r_read_bit; + ds_bus_master->write_bit = &ds9490r_write_bit; + ds_bus_master->read_byte = &ds9490r_read_byte; + ds_bus_master->write_byte = &ds9490r_write_byte; + ds_bus_master->read_block = &ds9490r_read_block; + ds_bus_master->write_block = &ds9490r_write_block; + ds_bus_master->reset_bus = &ds9490r_reset; + + err = w1_add_master_device(ds_bus_master); + if (err) + goto err_out_put_device; + + return 0; + +err_out_put_device: + ds_put_device(ds_dev); +err_out_free_bus_master: + kfree(ds_bus_master); + + return err; +} + +static void __devexit ds_w1_fini(void) +{ + w1_remove_master_device(ds_bus_master); + ds_put_device(ds_dev); + kfree(ds_bus_master); +} + +module_init(ds_w1_init); +module_exit(ds_w1_fini); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Evgeniy Polyakov "); diff --git a/drivers/w1/masters/dscore.c b/drivers/w1/masters/dscore.c new file mode 100644 index 000000000000..2cf7776a7080 --- /dev/null +++ b/drivers/w1/masters/dscore.c @@ -0,0 +1,795 @@ +/* + * dscore.c + * + * Copyright (c) 2004 Evgeniy Polyakov + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include + +#include "dscore.h" + +static struct usb_device_id ds_id_table [] = { + { USB_DEVICE(0x04fa, 0x2490) }, + { }, +}; +MODULE_DEVICE_TABLE(usb, ds_id_table); + +static int ds_probe(struct usb_interface *, const struct usb_device_id *); +static void ds_disconnect(struct usb_interface *); + +int ds_touch_bit(struct ds_device *, u8, u8 *); +int ds_read_byte(struct ds_device *, u8 *); +int ds_read_bit(struct ds_device *, u8 *); +int ds_write_byte(struct ds_device *, u8); +int ds_write_bit(struct ds_device *, u8); +static int ds_start_pulse(struct ds_device *, int); +int ds_reset(struct ds_device *, struct ds_status *); +struct ds_device * ds_get_device(void); +void ds_put_device(struct ds_device *); + +static inline void ds_dump_status(unsigned char *, unsigned char *, int); +static int ds_send_control(struct ds_device *, u16, u16); +static int ds_send_control_mode(struct ds_device *, u16, u16); +static int ds_send_control_cmd(struct ds_device *, u16, u16); + + +static struct usb_driver ds_driver = { + .name = "DS9490R", + .probe = ds_probe, + .disconnect = ds_disconnect, + .id_table = ds_id_table, +}; + +static struct ds_device *ds_dev; + +struct ds_device * ds_get_device(void) +{ + if (ds_dev) + atomic_inc(&ds_dev->refcnt); + return ds_dev; +} + +void ds_put_device(struct ds_device *dev) +{ + atomic_dec(&dev->refcnt); +} + +static int ds_send_control_cmd(struct ds_device *dev, u16 value, u16 index) +{ + int err; + + err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]), + CONTROL_CMD, 0x40, value, index, NULL, 0, 1000); + if (err < 0) { + printk(KERN_ERR "Failed to send command control message %x.%x: err=%d.\n", + value, index, err); + return err; + } + + return err; +} + +static int ds_send_control_mode(struct ds_device *dev, u16 value, u16 index) +{ + int err; + + err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]), + MODE_CMD, 0x40, value, index, NULL, 0, 1000); + if (err < 0) { + printk(KERN_ERR "Failed to send mode control message %x.%x: err=%d.\n", + value, index, err); + return err; + } + + return err; +} + +static int ds_send_control(struct ds_device *dev, u16 value, u16 index) +{ + int err; + + err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]), + COMM_CMD, 0x40, value, index, NULL, 0, 1000); + if (err < 0) { + printk(KERN_ERR "Failed to send control message %x.%x: err=%d.\n", + value, index, err); + return err; + } + + return err; +} + +static inline void ds_dump_status(unsigned char *buf, unsigned char *str, int off) +{ + printk("%45s: %8x\n", str, buf[off]); +} + +static int ds_recv_status_nodump(struct ds_device *dev, struct ds_status *st, + unsigned char *buf, int size) +{ + int count, err; + + memset(st, 0, sizeof(st)); + + count = 0; + err = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, dev->ep[EP_STATUS]), buf, size, &count, 100); + if (err < 0) { + printk(KERN_ERR "Failed to read 1-wire data from 0x%x: err=%d.\n", dev->ep[EP_STATUS], err); + return err; + } + + if (count >= sizeof(*st)) + memcpy(st, buf, sizeof(*st)); + + return count; +} + +static int ds_recv_status(struct ds_device *dev, struct ds_status *st) +{ + unsigned char buf[64]; + int count, err = 0, i; + + memcpy(st, buf, sizeof(*st)); + + count = ds_recv_status_nodump(dev, st, buf, sizeof(buf)); + if (count < 0) + return err; + + printk("0x%x: count=%d, status: ", dev->ep[EP_STATUS], count); + for (i=0; i= 16) { + ds_dump_status(buf, "enable flag", 0); + ds_dump_status(buf, "1-wire speed", 1); + ds_dump_status(buf, "strong pullup duration", 2); + ds_dump_status(buf, "programming pulse duration", 3); + ds_dump_status(buf, "pulldown slew rate control", 4); + ds_dump_status(buf, "write-1 low time", 5); + ds_dump_status(buf, "data sample offset/write-0 recovery time", 6); + ds_dump_status(buf, "reserved (test register)", 7); + ds_dump_status(buf, "device status flags", 8); + ds_dump_status(buf, "communication command byte 1", 9); + ds_dump_status(buf, "communication command byte 2", 10); + ds_dump_status(buf, "communication command buffer status", 11); + ds_dump_status(buf, "1-wire data output buffer status", 12); + ds_dump_status(buf, "1-wire data input buffer status", 13); + ds_dump_status(buf, "reserved", 14); + ds_dump_status(buf, "reserved", 15); + } + + memcpy(st, buf, sizeof(*st)); + + if (st->status & ST_EPOF) { + printk(KERN_INFO "Resetting device after ST_EPOF.\n"); + err = ds_send_control_cmd(dev, CTL_RESET_DEVICE, 0); + if (err) + return err; + count = ds_recv_status_nodump(dev, st, buf, sizeof(buf)); + if (count < 0) + return err; + } +#if 0 + if (st->status & ST_IDLE) { + printk(KERN_INFO "Resetting pulse after ST_IDLE.\n"); + err = ds_start_pulse(dev, PULLUP_PULSE_DURATION); + if (err) + return err; + } +#endif + + return err; +} + +static int ds_recv_data(struct ds_device *dev, unsigned char *buf, int size) +{ + int count, err; + struct ds_status st; + + count = 0; + err = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, dev->ep[EP_DATA_IN]), + buf, size, &count, 1000); + if (err < 0) { + printk(KERN_INFO "Clearing ep0x%x.\n", dev->ep[EP_DATA_IN]); + usb_clear_halt(dev->udev, usb_rcvbulkpipe(dev->udev, dev->ep[EP_DATA_IN])); + ds_recv_status(dev, &st); + return err; + } + +#if 0 + { + int i; + + printk("%s: count=%d: ", __func__, count); + for (i=0; iudev, usb_sndbulkpipe(dev->udev, dev->ep[EP_DATA_OUT]), buf, len, &count, 1000); + if (err < 0) { + printk(KERN_ERR "Failed to read 1-wire data from 0x02: err=%d.\n", err); + return err; + } + + return err; +} + +#if 0 + +int ds_stop_pulse(struct ds_device *dev, int limit) +{ + struct ds_status st; + int count = 0, err = 0; + u8 buf[0x20]; + + do { + err = ds_send_control(dev, CTL_HALT_EXE_IDLE, 0); + if (err) + break; + err = ds_send_control(dev, CTL_RESUME_EXE, 0); + if (err) + break; + err = ds_recv_status_nodump(dev, &st, buf, sizeof(buf)); + if (err) + break; + + if ((st.status & ST_SPUA) == 0) { + err = ds_send_control_mode(dev, MOD_PULSE_EN, 0); + if (err) + break; + } + } while(++count < limit); + + return err; +} + +int ds_detect(struct ds_device *dev, struct ds_status *st) +{ + int err; + + err = ds_send_control_cmd(dev, CTL_RESET_DEVICE, 0); + if (err) + return err; + + err = ds_send_control(dev, COMM_SET_DURATION | COMM_IM, 0); + if (err) + return err; + + err = ds_send_control(dev, COMM_SET_DURATION | COMM_IM | COMM_TYPE, 0x40); + if (err) + return err; + + err = ds_send_control_mode(dev, MOD_PULSE_EN, PULSE_PROG); + if (err) + return err; + + err = ds_recv_status(dev, st); + + return err; +} + +#endif /* 0 */ + +static int ds_wait_status(struct ds_device *dev, struct ds_status *st) +{ + u8 buf[0x20]; + int err, count = 0; + + do { + err = ds_recv_status_nodump(dev, st, buf, sizeof(buf)); +#if 0 + if (err >= 0) { + int i; + printk("0x%x: count=%d, status: ", dev->ep[EP_STATUS], err); + for (i=0; i 16) && (buf[0x10] & 0x01)) || count >= 100 || err < 0) { + ds_recv_status(dev, st); + return -1; + } else + return 0; +} + +int ds_reset(struct ds_device *dev, struct ds_status *st) +{ + int err; + + //err = ds_send_control(dev, COMM_1_WIRE_RESET | COMM_F | COMM_IM | COMM_SE, SPEED_FLEXIBLE); + err = ds_send_control(dev, 0x43, SPEED_NORMAL); + if (err) + return err; + + ds_wait_status(dev, st); +#if 0 + if (st->command_buffer_status) { + printk(KERN_INFO "Short circuit.\n"); + return -EIO; + } +#endif + + return 0; +} + +#if 0 +int ds_set_speed(struct ds_device *dev, int speed) +{ + int err; + + if (speed != SPEED_NORMAL && speed != SPEED_FLEXIBLE && speed != SPEED_OVERDRIVE) + return -EINVAL; + + if (speed != SPEED_OVERDRIVE) + speed = SPEED_FLEXIBLE; + + speed &= 0xff; + + err = ds_send_control_mode(dev, MOD_1WIRE_SPEED, speed); + if (err) + return err; + + return err; +} +#endif /* 0 */ + +static int ds_start_pulse(struct ds_device *dev, int delay) +{ + int err; + u8 del = 1 + (u8)(delay >> 4); + struct ds_status st; + +#if 0 + err = ds_stop_pulse(dev, 10); + if (err) + return err; + + err = ds_send_control_mode(dev, MOD_PULSE_EN, PULSE_SPUE); + if (err) + return err; +#endif + err = ds_send_control(dev, COMM_SET_DURATION | COMM_IM, del); + if (err) + return err; + + err = ds_send_control(dev, COMM_PULSE | COMM_IM | COMM_F, 0); + if (err) + return err; + + mdelay(delay); + + ds_wait_status(dev, &st); + + return err; +} + +int ds_touch_bit(struct ds_device *dev, u8 bit, u8 *tbit) +{ + int err, count; + struct ds_status st; + u16 value = (COMM_BIT_IO | COMM_IM) | ((bit) ? COMM_D : 0); + u16 cmd; + + err = ds_send_control(dev, value, 0); + if (err) + return err; + + count = 0; + do { + err = ds_wait_status(dev, &st); + if (err) + return err; + + cmd = st.command0 | (st.command1 << 8); + } while (cmd != value && ++count < 10); + + if (err < 0 || count >= 10) { + printk(KERN_ERR "Failed to obtain status.\n"); + return -EINVAL; + } + + err = ds_recv_data(dev, tbit, sizeof(*tbit)); + if (err < 0) + return err; + + return 0; +} + +int ds_write_bit(struct ds_device *dev, u8 bit) +{ + int err; + struct ds_status st; + + err = ds_send_control(dev, COMM_BIT_IO | COMM_IM | (bit) ? COMM_D : 0, 0); + if (err) + return err; + + ds_wait_status(dev, &st); + + return 0; +} + +int ds_write_byte(struct ds_device *dev, u8 byte) +{ + int err; + struct ds_status st; + u8 rbyte; + + err = ds_send_control(dev, COMM_BYTE_IO | COMM_IM | COMM_SPU, byte); + if (err) + return err; + + err = ds_wait_status(dev, &st); + if (err) + return err; + + err = ds_recv_data(dev, &rbyte, sizeof(rbyte)); + if (err < 0) + return err; + + ds_start_pulse(dev, PULLUP_PULSE_DURATION); + + return !(byte == rbyte); +} + +int ds_read_bit(struct ds_device *dev, u8 *bit) +{ + int err; + + err = ds_send_control_mode(dev, MOD_PULSE_EN, PULSE_SPUE); + if (err) + return err; + + err = ds_send_control(dev, COMM_BIT_IO | COMM_IM | COMM_SPU | COMM_D, 0); + if (err) + return err; + + err = ds_recv_data(dev, bit, sizeof(*bit)); + if (err < 0) + return err; + + return 0; +} + +int ds_read_byte(struct ds_device *dev, u8 *byte) +{ + int err; + struct ds_status st; + + err = ds_send_control(dev, COMM_BYTE_IO | COMM_IM , 0xff); + if (err) + return err; + + ds_wait_status(dev, &st); + + err = ds_recv_data(dev, byte, sizeof(*byte)); + if (err < 0) + return err; + + return 0; +} + +int ds_read_block(struct ds_device *dev, u8 *buf, int len) +{ + struct ds_status st; + int err; + + if (len > 64*1024) + return -E2BIG; + + memset(buf, 0xFF, len); + + err = ds_send_data(dev, buf, len); + if (err < 0) + return err; + + err = ds_send_control(dev, COMM_BLOCK_IO | COMM_IM | COMM_SPU, len); + if (err) + return err; + + ds_wait_status(dev, &st); + + memset(buf, 0x00, len); + err = ds_recv_data(dev, buf, len); + + return err; +} + +int ds_write_block(struct ds_device *dev, u8 *buf, int len) +{ + int err; + struct ds_status st; + + err = ds_send_data(dev, buf, len); + if (err < 0) + return err; + + ds_wait_status(dev, &st); + + err = ds_send_control(dev, COMM_BLOCK_IO | COMM_IM | COMM_SPU, len); + if (err) + return err; + + ds_wait_status(dev, &st); + + err = ds_recv_data(dev, buf, len); + if (err < 0) + return err; + + ds_start_pulse(dev, PULLUP_PULSE_DURATION); + + return !(err == len); +} + +#if 0 + +int ds_search(struct ds_device *dev, u64 init, u64 *buf, u8 id_number, int conditional_search) +{ + int err; + u16 value, index; + struct ds_status st; + + memset(buf, 0, sizeof(buf)); + + err = ds_send_data(ds_dev, (unsigned char *)&init, 8); + if (err) + return err; + + ds_wait_status(ds_dev, &st); + + value = COMM_SEARCH_ACCESS | COMM_IM | COMM_SM | COMM_F | COMM_RTS; + index = (conditional_search ? 0xEC : 0xF0) | (id_number << 8); + err = ds_send_control(ds_dev, value, index); + if (err) + return err; + + ds_wait_status(ds_dev, &st); + + err = ds_recv_data(ds_dev, (unsigned char *)buf, 8*id_number); + if (err < 0) + return err; + + return err/8; +} + +int ds_match_access(struct ds_device *dev, u64 init) +{ + int err; + struct ds_status st; + + err = ds_send_data(dev, (unsigned char *)&init, sizeof(init)); + if (err) + return err; + + ds_wait_status(dev, &st); + + err = ds_send_control(dev, COMM_MATCH_ACCESS | COMM_IM | COMM_RST, 0x0055); + if (err) + return err; + + ds_wait_status(dev, &st); + + return 0; +} + +int ds_set_path(struct ds_device *dev, u64 init) +{ + int err; + struct ds_status st; + u8 buf[9]; + + memcpy(buf, &init, 8); + buf[8] = BRANCH_MAIN; + + err = ds_send_data(dev, buf, sizeof(buf)); + if (err) + return err; + + ds_wait_status(dev, &st); + + err = ds_send_control(dev, COMM_SET_PATH | COMM_IM | COMM_RST, 0); + if (err) + return err; + + ds_wait_status(dev, &st); + + return 0; +} + +#endif /* 0 */ + +static int ds_probe(struct usb_interface *intf, + const struct usb_device_id *udev_id) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct usb_endpoint_descriptor *endpoint; + struct usb_host_interface *iface_desc; + int i, err; + + ds_dev = kmalloc(sizeof(struct ds_device), GFP_KERNEL); + if (!ds_dev) { + printk(KERN_INFO "Failed to allocate new DS9490R structure.\n"); + return -ENOMEM; + } + + ds_dev->udev = usb_get_dev(udev); + usb_set_intfdata(intf, ds_dev); + + err = usb_set_interface(ds_dev->udev, intf->altsetting[0].desc.bInterfaceNumber, 3); + if (err) { + printk(KERN_ERR "Failed to set alternative setting 3 for %d interface: err=%d.\n", + intf->altsetting[0].desc.bInterfaceNumber, err); + return err; + } + + err = usb_reset_configuration(ds_dev->udev); + if (err) { + printk(KERN_ERR "Failed to reset configuration: err=%d.\n", err); + return err; + } + + iface_desc = &intf->altsetting[0]; + if (iface_desc->desc.bNumEndpoints != NUM_EP-1) { + printk(KERN_INFO "Num endpoints=%d. It is not DS9490R.\n", iface_desc->desc.bNumEndpoints); + return -ENODEV; + } + + atomic_set(&ds_dev->refcnt, 0); + memset(ds_dev->ep, 0, sizeof(ds_dev->ep)); + + /* + * This loop doesn'd show control 0 endpoint, + * so we will fill only 1-3 endpoints entry. + */ + for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { + endpoint = &iface_desc->endpoint[i].desc; + + ds_dev->ep[i+1] = endpoint->bEndpointAddress; + + printk("%d: addr=%x, size=%d, dir=%s, type=%x\n", + i, endpoint->bEndpointAddress, le16_to_cpu(endpoint->wMaxPacketSize), + (endpoint->bEndpointAddress & USB_DIR_IN)?"IN":"OUT", + endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK); + } + +#if 0 + { + int err, i; + u64 buf[3]; + u64 init=0xb30000002078ee81ull; + struct ds_status st; + + ds_reset(ds_dev, &st); + err = ds_search(ds_dev, init, buf, 3, 0); + if (err < 0) + return err; + for (i=0; irefcnt)) { + printk(KERN_INFO "Waiting for DS to become free: refcnt=%d.\n", + atomic_read(&dev->refcnt)); + + if (msleep_interruptible(1000)) + flush_signals(current); + } + + usb_put_dev(dev->udev); + kfree(dev); + ds_dev = NULL; +} + +static int ds_init(void) +{ + int err; + + err = usb_register(&ds_driver); + if (err) { + printk(KERN_INFO "Failed to register DS9490R USB device: err=%d.\n", err); + return err; + } + + return 0; +} + +static void ds_fini(void) +{ + usb_deregister(&ds_driver); +} + +module_init(ds_init); +module_exit(ds_fini); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Evgeniy Polyakov "); + +EXPORT_SYMBOL(ds_touch_bit); +EXPORT_SYMBOL(ds_read_byte); +EXPORT_SYMBOL(ds_read_bit); +EXPORT_SYMBOL(ds_read_block); +EXPORT_SYMBOL(ds_write_byte); +EXPORT_SYMBOL(ds_write_bit); +EXPORT_SYMBOL(ds_write_block); +EXPORT_SYMBOL(ds_reset); +EXPORT_SYMBOL(ds_get_device); +EXPORT_SYMBOL(ds_put_device); + +/* + * This functions can be used for EEPROM programming, + * when driver will be included into mainline this will + * require uncommenting. + */ +#if 0 +EXPORT_SYMBOL(ds_start_pulse); +EXPORT_SYMBOL(ds_set_speed); +EXPORT_SYMBOL(ds_detect); +EXPORT_SYMBOL(ds_stop_pulse); +EXPORT_SYMBOL(ds_search); +#endif diff --git a/drivers/w1/masters/dscore.h b/drivers/w1/masters/dscore.h new file mode 100644 index 000000000000..6cf5671d6ebe --- /dev/null +++ b/drivers/w1/masters/dscore.h @@ -0,0 +1,166 @@ +/* + * dscore.h + * + * Copyright (c) 2004 Evgeniy Polyakov + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __DSCORE_H +#define __DSCORE_H + +#include +#include + +/* COMMAND TYPE CODES */ +#define CONTROL_CMD 0x00 +#define COMM_CMD 0x01 +#define MODE_CMD 0x02 + +/* CONTROL COMMAND CODES */ +#define CTL_RESET_DEVICE 0x0000 +#define CTL_START_EXE 0x0001 +#define CTL_RESUME_EXE 0x0002 +#define CTL_HALT_EXE_IDLE 0x0003 +#define CTL_HALT_EXE_DONE 0x0004 +#define CTL_FLUSH_COMM_CMDS 0x0007 +#define CTL_FLUSH_RCV_BUFFER 0x0008 +#define CTL_FLUSH_XMT_BUFFER 0x0009 +#define CTL_GET_COMM_CMDS 0x000A + +/* MODE COMMAND CODES */ +#define MOD_PULSE_EN 0x0000 +#define MOD_SPEED_CHANGE_EN 0x0001 +#define MOD_1WIRE_SPEED 0x0002 +#define MOD_STRONG_PU_DURATION 0x0003 +#define MOD_PULLDOWN_SLEWRATE 0x0004 +#define MOD_PROG_PULSE_DURATION 0x0005 +#define MOD_WRITE1_LOWTIME 0x0006 +#define MOD_DSOW0_TREC 0x0007 + +/* COMMUNICATION COMMAND CODES */ +#define COMM_ERROR_ESCAPE 0x0601 +#define COMM_SET_DURATION 0x0012 +#define COMM_BIT_IO 0x0020 +#define COMM_PULSE 0x0030 +#define COMM_1_WIRE_RESET 0x0042 +#define COMM_BYTE_IO 0x0052 +#define COMM_MATCH_ACCESS 0x0064 +#define COMM_BLOCK_IO 0x0074 +#define COMM_READ_STRAIGHT 0x0080 +#define COMM_DO_RELEASE 0x6092 +#define COMM_SET_PATH 0x00A2 +#define COMM_WRITE_SRAM_PAGE 0x00B2 +#define COMM_WRITE_EPROM 0x00C4 +#define COMM_READ_CRC_PROT_PAGE 0x00D4 +#define COMM_READ_REDIRECT_PAGE_CRC 0x21E4 +#define COMM_SEARCH_ACCESS 0x00F4 + +/* Communication command bits */ +#define COMM_TYPE 0x0008 +#define COMM_SE 0x0008 +#define COMM_D 0x0008 +#define COMM_Z 0x0008 +#define COMM_CH 0x0008 +#define COMM_SM 0x0008 +#define COMM_R 0x0008 +#define COMM_IM 0x0001 + +#define COMM_PS 0x4000 +#define COMM_PST 0x4000 +#define COMM_CIB 0x4000 +#define COMM_RTS 0x4000 +#define COMM_DT 0x2000 +#define COMM_SPU 0x1000 +#define COMM_F 0x0800 +#define COMM_NTP 0x0400 +#define COMM_ICP 0x0200 +#define COMM_RST 0x0100 + +#define PULSE_PROG 0x01 +#define PULSE_SPUE 0x02 + +#define BRANCH_MAIN 0xCC +#define BRANCH_AUX 0x33 + +/* + * Duration of the strong pull-up pulse in milliseconds. + */ +#define PULLUP_PULSE_DURATION 750 + +/* Status flags */ +#define ST_SPUA 0x01 /* Strong Pull-up is active */ +#define ST_PRGA 0x02 /* 12V programming pulse is being generated */ +#define ST_12VP 0x04 /* external 12V programming voltage is present */ +#define ST_PMOD 0x08 /* DS2490 powered from USB and external sources */ +#define ST_HALT 0x10 /* DS2490 is currently halted */ +#define ST_IDLE 0x20 /* DS2490 is currently idle */ +#define ST_EPOF 0x80 + +#define SPEED_NORMAL 0x00 +#define SPEED_FLEXIBLE 0x01 +#define SPEED_OVERDRIVE 0x02 + +#define NUM_EP 4 +#define EP_CONTROL 0 +#define EP_STATUS 1 +#define EP_DATA_OUT 2 +#define EP_DATA_IN 3 + +struct ds_device +{ + struct usb_device *udev; + struct usb_interface *intf; + + int ep[NUM_EP]; + + atomic_t refcnt; +}; + +struct ds_status +{ + u8 enable; + u8 speed; + u8 pullup_dur; + u8 ppuls_dur; + u8 pulldown_slew; + u8 write1_time; + u8 write0_time; + u8 reserved0; + u8 status; + u8 command0; + u8 command1; + u8 command_buffer_status; + u8 data_out_buffer_status; + u8 data_in_buffer_status; + u8 reserved1; + u8 reserved2; + +}; + +int ds_touch_bit(struct ds_device *, u8, u8 *); +int ds_read_byte(struct ds_device *, u8 *); +int ds_read_bit(struct ds_device *, u8 *); +int ds_write_byte(struct ds_device *, u8); +int ds_write_bit(struct ds_device *, u8); +int ds_reset(struct ds_device *, struct ds_status *); +struct ds_device * ds_get_device(void); +void ds_put_device(struct ds_device *); +int ds_write_block(struct ds_device *, u8 *, int); +int ds_read_block(struct ds_device *, u8 *, int); + +#endif /* __DSCORE_H */ + diff --git a/drivers/w1/masters/matrox_w1.c b/drivers/w1/masters/matrox_w1.c new file mode 100644 index 000000000000..591809cbbb97 --- /dev/null +++ b/drivers/w1/masters/matrox_w1.c @@ -0,0 +1,247 @@ +/* + * matrox_w1.c + * + * Copyright (c) 2004 Evgeniy Polyakov + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "../w1.h" +#include "../w1_int.h" +#include "../w1_log.h" + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Evgeniy Polyakov "); +MODULE_DESCRIPTION("Driver for transport(Dallas 1-wire prtocol) over VGA DDC(matrox gpio)."); + +static struct pci_device_id matrox_w1_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G400) }, + { }, +}; +MODULE_DEVICE_TABLE(pci, matrox_w1_tbl); + +static int __devinit matrox_w1_probe(struct pci_dev *, const struct pci_device_id *); +static void __devexit matrox_w1_remove(struct pci_dev *); + +static struct pci_driver matrox_w1_pci_driver = { + .name = "matrox_w1", + .id_table = matrox_w1_tbl, + .probe = matrox_w1_probe, + .remove = __devexit_p(matrox_w1_remove), +}; + +/* + * Matrox G400 DDC registers. + */ + +#define MATROX_G400_DDC_CLK (1<<4) +#define MATROX_G400_DDC_DATA (1<<1) + +#define MATROX_BASE 0x3C00 +#define MATROX_STATUS 0x1e14 + +#define MATROX_PORT_INDEX_OFFSET 0x00 +#define MATROX_PORT_DATA_OFFSET 0x0A + +#define MATROX_GET_CONTROL 0x2A +#define MATROX_GET_DATA 0x2B +#define MATROX_CURSOR_CTL 0x06 + +struct matrox_device +{ + void __iomem *base_addr; + void __iomem *port_index; + void __iomem *port_data; + u8 data_mask; + + unsigned long phys_addr; + void __iomem *virt_addr; + unsigned long found; + + struct w1_bus_master *bus_master; +}; + +static u8 matrox_w1_read_ddc_bit(void *); +static void matrox_w1_write_ddc_bit(void *, u8); + +/* + * These functions read and write DDC Data bit. + * + * Using tristate pins, since i can't find any open-drain pin in whole motherboard. + * Unfortunately we can't connect to Intel's 82801xx IO controller + * since we don't know motherboard schema, wich has pretty unused(may be not) GPIO. + * + * I've heard that PIIX also has open drain pin. + * + * Port mapping. + */ +static __inline__ u8 matrox_w1_read_reg(struct matrox_device *dev, u8 reg) +{ + u8 ret; + + writeb(reg, dev->port_index); + ret = readb(dev->port_data); + barrier(); + + return ret; +} + +static __inline__ void matrox_w1_write_reg(struct matrox_device *dev, u8 reg, u8 val) +{ + writeb(reg, dev->port_index); + writeb(val, dev->port_data); + wmb(); +} + +static void matrox_w1_write_ddc_bit(void *data, u8 bit) +{ + u8 ret; + struct matrox_device *dev = data; + + if (bit) + bit = 0; + else + bit = dev->data_mask; + + ret = matrox_w1_read_reg(dev, MATROX_GET_CONTROL); + matrox_w1_write_reg(dev, MATROX_GET_CONTROL, ((ret & ~dev->data_mask) | bit)); + matrox_w1_write_reg(dev, MATROX_GET_DATA, 0x00); +} + +static u8 matrox_w1_read_ddc_bit(void *data) +{ + u8 ret; + struct matrox_device *dev = data; + + ret = matrox_w1_read_reg(dev, MATROX_GET_DATA); + + return ret; +} + +static void matrox_w1_hw_init(struct matrox_device *dev) +{ + matrox_w1_write_reg(dev, MATROX_GET_DATA, 0xFF); + matrox_w1_write_reg(dev, MATROX_GET_CONTROL, 0x00); +} + +static int __devinit matrox_w1_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + struct matrox_device *dev; + int err; + + assert(pdev != NULL); + assert(ent != NULL); + + if (pdev->vendor != PCI_VENDOR_ID_MATROX || pdev->device != PCI_DEVICE_ID_MATROX_G400) + return -ENODEV; + + dev = kmalloc(sizeof(struct matrox_device) + + sizeof(struct w1_bus_master), GFP_KERNEL); + if (!dev) { + dev_err(&pdev->dev, + "%s: Failed to create new matrox_device object.\n", + __func__); + return -ENOMEM; + } + + memset(dev, 0, sizeof(struct matrox_device) + sizeof(struct w1_bus_master)); + + dev->bus_master = (struct w1_bus_master *)(dev + 1); + + /* + * True for G400, for some other we need resource 0, see drivers/video/matrox/matroxfb_base.c + */ + + dev->phys_addr = pci_resource_start(pdev, 1); + + dev->virt_addr = ioremap_nocache(dev->phys_addr, 16384); + if (!dev->virt_addr) { + dev_err(&pdev->dev, "%s: failed to ioremap(0x%lx, %d).\n", + __func__, dev->phys_addr, 16384); + err = -EIO; + goto err_out_free_device; + } + + dev->base_addr = dev->virt_addr + MATROX_BASE; + dev->port_index = dev->base_addr + MATROX_PORT_INDEX_OFFSET; + dev->port_data = dev->base_addr + MATROX_PORT_DATA_OFFSET; + dev->data_mask = (MATROX_G400_DDC_DATA); + + matrox_w1_hw_init(dev); + + dev->bus_master->data = dev; + dev->bus_master->read_bit = &matrox_w1_read_ddc_bit; + dev->bus_master->write_bit = &matrox_w1_write_ddc_bit; + + err = w1_add_master_device(dev->bus_master); + if (err) + goto err_out_free_device; + + pci_set_drvdata(pdev, dev); + + dev->found = 1; + + dev_info(&pdev->dev, "Matrox G400 GPIO transport layer for 1-wire.\n"); + + return 0; + +err_out_free_device: + kfree(dev); + + return err; +} + +static void __devexit matrox_w1_remove(struct pci_dev *pdev) +{ + struct matrox_device *dev = pci_get_drvdata(pdev); + + assert(dev != NULL); + + if (dev->found) { + w1_remove_master_device(dev->bus_master); + iounmap(dev->virt_addr); + } + kfree(dev); +} + +static int __init matrox_w1_init(void) +{ + return pci_register_driver(&matrox_w1_pci_driver); +} + +static void __exit matrox_w1_fini(void) +{ + pci_unregister_driver(&matrox_w1_pci_driver); +} + +module_init(matrox_w1_init); +module_exit(matrox_w1_fini); -- cgit v1.2.3