summaryrefslogtreecommitdiff
path: root/include/asm-mips/mach-pb1x00/pb1000.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-mips/mach-pb1x00/pb1000.h')
-rw-r--r--include/asm-mips/mach-pb1x00/pb1000.h189
1 files changed, 52 insertions, 137 deletions
diff --git a/include/asm-mips/mach-pb1x00/pb1000.h b/include/asm-mips/mach-pb1x00/pb1000.h
index b52e0e7ee3f..6d1ff9060e4 100644
--- a/include/asm-mips/mach-pb1x00/pb1000.h
+++ b/include/asm-mips/mach-pb1x00/pb1000.h
@@ -1,9 +1,8 @@
/*
- * Alchemy Semi PB1000 Referrence Board
+ * Alchemy Semi Pb1000 Referrence Board
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* ########################################################################
*
@@ -28,145 +27,61 @@
#define __ASM_PB1000_H
/* PCMCIA PB1000 specific defines */
-#define PCMCIA_MAX_SOCK 1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
-
-#define PB1000_PCR 0xBE000000
-# define PCR_SLOT_0_VPP0 (1<<0)
-# define PCR_SLOT_0_VPP1 (1<<1)
-# define PCR_SLOT_0_VCC0 (1<<2)
-# define PCR_SLOT_0_VCC1 (1<<3)
-# define PCR_SLOT_0_RST (1<<4)
-
-# define PCR_SLOT_1_VPP0 (1<<8)
-# define PCR_SLOT_1_VPP1 (1<<9)
-# define PCR_SLOT_1_VCC0 (1<<10)
-# define PCR_SLOT_1_VCC1 (1<<11)
-# define PCR_SLOT_1_RST (1<<12)
-
-#define PB1000_MDR 0xBE000004
-# define MDR_PI (1<<5) /* pcmcia int latch */
-# define MDR_EPI (1<<14) /* enable pcmcia int */
-# define MDR_CPI (1<<15) /* clear pcmcia int */
-
-#define PB1000_ACR1 0xBE000008
-# define ACR1_SLOT_0_CD1 (1<<0) /* card detect 1 */
-# define ACR1_SLOT_0_CD2 (1<<1) /* card detect 2 */
-# define ACR1_SLOT_0_READY (1<<2) /* ready */
-# define ACR1_SLOT_0_STATUS (1<<3) /* status change */
-# define ACR1_SLOT_0_VS1 (1<<4) /* voltage sense 1 */
-# define ACR1_SLOT_0_VS2 (1<<5) /* voltage sense 2 */
-# define ACR1_SLOT_0_INPACK (1<<6) /* inpack pin status */
-# define ACR1_SLOT_1_CD1 (1<<8) /* card detect 1 */
-# define ACR1_SLOT_1_CD2 (1<<9) /* card detect 2 */
-# define ACR1_SLOT_1_READY (1<<10) /* ready */
-# define ACR1_SLOT_1_STATUS (1<<11) /* status change */
-# define ACR1_SLOT_1_VS1 (1<<12) /* voltage sense 1 */
-# define ACR1_SLOT_1_VS2 (1<<13) /* voltage sense 2 */
-# define ACR1_SLOT_1_INPACK (1<<14) /* inpack pin status */
-
-#define CPLD_AUX0 0xBE00000C
-#define CPLD_AUX1 0xBE000010
-#define CPLD_AUX2 0xBE000014
+#define PCMCIA_MAX_SOCK 1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
+
+#define PB1000_PCR 0xBE000000
+# define PCR_SLOT_0_VPP0 (1 << 0)
+# define PCR_SLOT_0_VPP1 (1 << 1)
+# define PCR_SLOT_0_VCC0 (1 << 2)
+# define PCR_SLOT_0_VCC1 (1 << 3)
+# define PCR_SLOT_0_RST (1 << 4)
+# define PCR_SLOT_1_VPP0 (1 << 8)
+# define PCR_SLOT_1_VPP1 (1 << 9)
+# define PCR_SLOT_1_VCC0 (1 << 10)
+# define PCR_SLOT_1_VCC1 (1 << 11)
+# define PCR_SLOT_1_RST (1 << 12)
+
+#define PB1000_MDR 0xBE000004
+# define MDR_PI (1 << 5) /* PCMCIA int latch */
+# define MDR_EPI (1 << 14) /* enable PCMCIA int */
+# define MDR_CPI (1 << 15) /* clear PCMCIA int */
+
+#define PB1000_ACR1 0xBE000008
+# define ACR1_SLOT_0_CD1 (1 << 0) /* card detect 1 */
+# define ACR1_SLOT_0_CD2 (1 << 1) /* card detect 2 */
+# define ACR1_SLOT_0_READY (1 << 2) /* ready */
+# define ACR1_SLOT_0_STATUS (1 << 3) /* status change */
+# define ACR1_SLOT_0_VS1 (1 << 4) /* voltage sense 1 */
+# define ACR1_SLOT_0_VS2 (1 << 5) /* voltage sense 2 */
+# define ACR1_SLOT_0_INPACK (1 << 6) /* inpack pin status */
+# define ACR1_SLOT_1_CD1 (1 << 8) /* card detect 1 */
+# define ACR1_SLOT_1_CD2 (1 << 9) /* card detect 2 */
+# define ACR1_SLOT_1_READY (1 << 10) /* ready */
+# define ACR1_SLOT_1_STATUS (1 << 11) /* status change */
+# define ACR1_SLOT_1_VS1 (1 << 12) /* voltage sense 1 */
+# define ACR1_SLOT_1_VS2 (1 << 13) /* voltage sense 2 */
+# define ACR1_SLOT_1_INPACK (1 << 14) /* inpack pin status */
+
+#define CPLD_AUX0 0xBE00000C
+#define CPLD_AUX1 0xBE000010
+#define CPLD_AUX2 0xBE000014
/* Voltage levels */
/* VPPEN1 - VPPEN0 */
-#define VPP_GND ((0<<1) | (0<<0))
-#define VPP_5V ((1<<1) | (0<<0))
-#define VPP_3V ((0<<1) | (1<<0))
-#define VPP_12V ((0<<1) | (1<<0))
-#define VPP_HIZ ((1<<1) | (1<<0))
+#define VPP_GND ((0 << 1) | (0 << 0))
+#define VPP_5V ((1 << 1) | (0 << 0))
+#define VPP_3V ((0 << 1) | (1 << 0))
+#define VPP_12V ((0 << 1) | (1 << 0))
+#define VPP_HIZ ((1 << 1) | (1 << 0))
/* VCCEN1 - VCCEN0 */
-#define VCC_3V ((0<<1) | (1<<0))
-#define VCC_5V ((1<<1) | (0<<0))
-#define VCC_HIZ ((0<<1) | (0<<0))
+#define VCC_3V ((0 << 1) | (1 << 0))
+#define VCC_5V ((1 << 1) | (0 << 0))
+#define VCC_HIZ ((0 << 1) | (0 << 0))
/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP, SLOT)\
- ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
-
-
-/* PCI PB1000 specific defines */
-/* The reason these defines are here instead of au1000.h is because
- * the Au1000 does not have a PCI bus controller so the PCI implementation
- * on the some of the older Pb1000 boards was very board specific.
- */
-#define PCI_CONFIG_BASE 0xBA020000 /* the only external slot */
-
-#define SDRAM_DEVID 0xBA010000
-#define SDRAM_CMD 0xBA010004
-#define SDRAM_CLASS 0xBA010008
-#define SDRAM_MISC 0xBA01000C
-#define SDRAM_MBAR 0xBA010010
-
-#define PCI_IO_DATA_PORT 0xBA800000
-
-#define PCI_IO_ADDR 0xBE00001C
-#define PCI_INT_ACK 0xBBC00000
-#define PCI_IO_READ 0xBBC00020
-#define PCI_IO_WRITE 0xBBC00030
-
-#define PCI_BRIDGE_CONFIG 0xBE000018
-
-#define PCI_IO_START 0x10000000
-#define PCI_IO_END 0x1000ffff
-#define PCI_MEM_START 0x18000000
-#define PCI_MEM_END 0x18ffffff
-
-#define PCI_FIRST_DEVFN 0
-#define PCI_LAST_DEVFN 1
-
-static inline u8 au_pci_io_readb(u32 addr)
-{
- writel(addr, PCI_IO_ADDR);
- writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<12), PCI_BRIDGE_CONFIG);
- return (readl(PCI_IO_DATA_PORT) & 0xff);
-}
-
-static inline u16 au_pci_io_readw(u32 addr)
-{
- writel(addr, PCI_IO_ADDR);
- writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<13), PCI_BRIDGE_CONFIG);
- return (readl(PCI_IO_DATA_PORT) & 0xffff);
-}
-
-static inline u32 au_pci_io_readl(u32 addr)
-{
- writel(addr, PCI_IO_ADDR);
- writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff), PCI_BRIDGE_CONFIG);
- return readl(PCI_IO_DATA_PORT);
-}
-
-static inline void au_pci_io_writeb(u8 val, u32 addr)
-{
- writel(addr, PCI_IO_ADDR);
- writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<12), PCI_BRIDGE_CONFIG);
- writel(val, PCI_IO_DATA_PORT);
-}
-
-static inline void au_pci_io_writew(u16 val, u32 addr)
-{
- writel(addr, PCI_IO_ADDR);
- writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<13), PCI_BRIDGE_CONFIG);
- writel(val, PCI_IO_DATA_PORT);
-}
-
-static inline void au_pci_io_writel(u32 val, u32 addr)
-{
- writel(addr, PCI_IO_ADDR);
- writel(readl(PCI_BRIDGE_CONFIG) & 0xffffcfff, PCI_BRIDGE_CONFIG);
- writel(val, PCI_IO_DATA_PORT);
-}
-
-static inline void set_sdram_extbyte(void)
-{
- writel(readl(PCI_BRIDGE_CONFIG) & 0xffffff00, PCI_BRIDGE_CONFIG);
-}
-
-static inline void set_slot_extbyte(void)
-{
- writel((readl(PCI_BRIDGE_CONFIG) & 0xffffbf00) | 0x18, PCI_BRIDGE_CONFIG);
-}
+#define SET_VCC_VPP(VCC, VPP, SLOT) \
+ ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
#endif /* __ASM_PB1000_H */