diff options
Diffstat (limited to 'drivers/misc/sgi-xp/xp.h')
-rw-r--r-- | drivers/misc/sgi-xp/xp.h | 305 |
1 files changed, 113 insertions, 192 deletions
diff --git a/drivers/misc/sgi-xp/xp.h b/drivers/misc/sgi-xp/xp.h index 5515234be86..03a87a307e3 100644 --- a/drivers/misc/sgi-xp/xp.h +++ b/drivers/misc/sgi-xp/xp.h @@ -157,215 +157,136 @@ struct xpc_msg { /* * Define the return values and values passed to user's callout functions. * (It is important to add new value codes at the end just preceding - * xpcUnknownReason, which must have the highest numerical value.) + * xpUnknownReason, which must have the highest numerical value.) */ -enum xpc_retval { - xpcSuccess = 0, +enum xp_retval { + xpSuccess = 0, - xpcNotConnected, /* 1: channel is not connected */ - xpcConnected, /* 2: channel connected (opened) */ - xpcRETIRED1, /* 3: (formerly xpcDisconnected) */ + xpNotConnected, /* 1: channel is not connected */ + xpConnected, /* 2: channel connected (opened) */ + xpRETIRED1, /* 3: (formerly xpDisconnected) */ - xpcMsgReceived, /* 4: message received */ - xpcMsgDelivered, /* 5: message delivered and acknowledged */ + xpMsgReceived, /* 4: message received */ + xpMsgDelivered, /* 5: message delivered and acknowledged */ - xpcRETIRED2, /* 6: (formerly xpcTransferFailed) */ + xpRETIRED2, /* 6: (formerly xpTransferFailed) */ - xpcNoWait, /* 7: operation would require wait */ - xpcRetry, /* 8: retry operation */ - xpcTimeout, /* 9: timeout in xpc_allocate_msg_wait() */ - xpcInterrupted, /* 10: interrupted wait */ + xpNoWait, /* 7: operation would require wait */ + xpRetry, /* 8: retry operation */ + xpTimeout, /* 9: timeout in xpc_allocate_msg_wait() */ + xpInterrupted, /* 10: interrupted wait */ - xpcUnequalMsgSizes, /* 11: message size disparity between sides */ - xpcInvalidAddress, /* 12: invalid address */ + xpUnequalMsgSizes, /* 11: message size disparity between sides */ + xpInvalidAddress, /* 12: invalid address */ - xpcNoMemory, /* 13: no memory available for XPC structures */ - xpcLackOfResources, /* 14: insufficient resources for operation */ - xpcUnregistered, /* 15: channel is not registered */ - xpcAlreadyRegistered, /* 16: channel is already registered */ + xpNoMemory, /* 13: no memory available for XPC structures */ + xpLackOfResources, /* 14: insufficient resources for operation */ + xpUnregistered, /* 15: channel is not registered */ + xpAlreadyRegistered, /* 16: channel is already registered */ - xpcPartitionDown, /* 17: remote partition is down */ - xpcNotLoaded, /* 18: XPC module is not loaded */ - xpcUnloading, /* 19: this side is unloading XPC module */ + xpPartitionDown, /* 17: remote partition is down */ + xpNotLoaded, /* 18: XPC module is not loaded */ + xpUnloading, /* 19: this side is unloading XPC module */ - xpcBadMagic, /* 20: XPC MAGIC string not found */ + xpBadMagic, /* 20: XPC MAGIC string not found */ - xpcReactivating, /* 21: remote partition was reactivated */ + xpReactivating, /* 21: remote partition was reactivated */ - xpcUnregistering, /* 22: this side is unregistering channel */ - xpcOtherUnregistering, /* 23: other side is unregistering channel */ + xpUnregistering, /* 22: this side is unregistering channel */ + xpOtherUnregistering, /* 23: other side is unregistering channel */ - xpcCloneKThread, /* 24: cloning kernel thread */ - xpcCloneKThreadFailed, /* 25: cloning kernel thread failed */ + xpCloneKThread, /* 24: cloning kernel thread */ + xpCloneKThreadFailed, /* 25: cloning kernel thread failed */ - xpcNoHeartbeat, /* 26: remote partition has no heartbeat */ + xpNoHeartbeat, /* 26: remote partition has no heartbeat */ - xpcPioReadError, /* 27: PIO read error */ - xpcPhysAddrRegFailed, /* 28: registration of phys addr range failed */ + xpPioReadError, /* 27: PIO read error */ + xpPhysAddrRegFailed, /* 28: registration of phys addr range failed */ - xpcBteDirectoryError, /* 29: maps to BTEFAIL_DIR */ - xpcBtePoisonError, /* 30: maps to BTEFAIL_POISON */ - xpcBteWriteError, /* 31: maps to BTEFAIL_WERR */ - xpcBteAccessError, /* 32: maps to BTEFAIL_ACCESS */ - xpcBtePWriteError, /* 33: maps to BTEFAIL_PWERR */ - xpcBtePReadError, /* 34: maps to BTEFAIL_PRERR */ - xpcBteTimeOutError, /* 35: maps to BTEFAIL_TOUT */ - xpcBteXtalkError, /* 36: maps to BTEFAIL_XTERR */ - xpcBteNotAvailable, /* 37: maps to BTEFAIL_NOTAVAIL */ - xpcBteUnmappedError, /* 38: unmapped BTEFAIL_ error */ + xpRETIRED3, /* 29: (formerly xpBteDirectoryError) */ + xpRETIRED4, /* 30: (formerly xpBtePoisonError) */ + xpRETIRED5, /* 31: (formerly xpBteWriteError) */ + xpRETIRED6, /* 32: (formerly xpBteAccessError) */ + xpRETIRED7, /* 33: (formerly xpBtePWriteError) */ + xpRETIRED8, /* 34: (formerly xpBtePReadError) */ + xpRETIRED9, /* 35: (formerly xpBteTimeOutError) */ + xpRETIRED10, /* 36: (formerly xpBteXtalkError) */ + xpRETIRED11, /* 37: (formerly xpBteNotAvailable) */ + xpRETIRED12, /* 38: (formerly xpBteUnmappedError) */ - xpcBadVersion, /* 39: bad version number */ - xpcVarsNotSet, /* 40: the XPC variables are not set up */ - xpcNoRsvdPageAddr, /* 41: unable to get rsvd page's phys addr */ - xpcInvalidPartid, /* 42: invalid partition ID */ - xpcLocalPartid, /* 43: local partition ID */ + xpBadVersion, /* 39: bad version number */ + xpVarsNotSet, /* 40: the XPC variables are not set up */ + xpNoRsvdPageAddr, /* 41: unable to get rsvd page's phys addr */ + xpInvalidPartid, /* 42: invalid partition ID */ + xpLocalPartid, /* 43: local partition ID */ - xpcOtherGoingDown, /* 44: other side going down, reason unknown */ - xpcSystemGoingDown, /* 45: system is going down, reason unknown */ - xpcSystemHalt, /* 46: system is being halted */ - xpcSystemReboot, /* 47: system is being rebooted */ - xpcSystemPoweroff, /* 48: system is being powered off */ + xpOtherGoingDown, /* 44: other side going down, reason unknown */ + xpSystemGoingDown, /* 45: system is going down, reason unknown */ + xpSystemHalt, /* 46: system is being halted */ + xpSystemReboot, /* 47: system is being rebooted */ + xpSystemPoweroff, /* 48: system is being powered off */ - xpcDisconnecting, /* 49: channel disconnecting (closing) */ + xpDisconnecting, /* 49: channel disconnecting (closing) */ - xpcOpenCloseError, /* 50: channel open/close protocol error */ + xpOpenCloseError, /* 50: channel open/close protocol error */ - xpcDisconnected, /* 51: channel disconnected (closed) */ + xpDisconnected, /* 51: channel disconnected (closed) */ - xpcBteSh2Start, /* 52: BTE CRB timeout */ + xpBteCopyError, /* 52: bte_copy() returned error */ - /* 53: 0x1 BTE Error Response Short */ - xpcBteSh2RspShort = xpcBteSh2Start + BTEFAIL_SH2_RESP_SHORT, - - /* 54: 0x2 BTE Error Response Long */ - xpcBteSh2RspLong = xpcBteSh2Start + BTEFAIL_SH2_RESP_LONG, - - /* 56: 0x4 BTE Error Response DSB */ - xpcBteSh2RspDSB = xpcBteSh2Start + BTEFAIL_SH2_RESP_DSP, - - /* 60: 0x8 BTE Error Response Access */ - xpcBteSh2RspAccess = xpcBteSh2Start + BTEFAIL_SH2_RESP_ACCESS, - - /* 68: 0x10 BTE Error CRB timeout */ - xpcBteSh2CRBTO = xpcBteSh2Start + BTEFAIL_SH2_CRB_TO, - - /* 84: 0x20 BTE Error NACK limit */ - xpcBteSh2NACKLimit = xpcBteSh2Start + BTEFAIL_SH2_NACK_LIMIT, - - /* 115: BTE end */ - xpcBteSh2End = xpcBteSh2Start + BTEFAIL_SH2_ALL, - - xpcUnknownReason /* 116: unknown reason - must be last in enum */ + xpUnknownReason /* 53: unknown reason - must be last in enum */ }; /* - * Define the callout function types used by XPC to update the user on - * connection activity and state changes (via the user function registered by - * xpc_connect()) and to notify them of messages received and delivered (via - * the user function registered by xpc_send_notify()). - * - * The two function types are xpc_channel_func and xpc_notify_func and - * both share the following arguments, with the exception of "data", which - * only xpc_channel_func has. + * Define the callout function type used by XPC to update the user on + * connection activity and state changes via the user function registered + * by xpc_connect(). * * Arguments: * - * reason - reason code. (See following table.) + * reason - reason code. * partid - partition ID associated with condition. * ch_number - channel # associated with condition. - * data - pointer to optional data. (See following table.) + * data - pointer to optional data. * key - pointer to optional user-defined value provided as the "key" - * argument to xpc_connect() or xpc_send_notify(). + * argument to xpc_connect(). * - * In the following table the "Optional Data" column applies to callouts made - * to functions registered by xpc_connect(). A "NA" in that column indicates - * that this reason code can be passed to functions registered by - * xpc_send_notify() (i.e. they don't have data arguments). + * A reason code of xpConnected indicates that a connection has been + * established to the specified partition on the specified channel. The data + * argument indicates the max number of entries allowed in the message queue. * - * Also, the first three reason codes in the following table indicate - * success, whereas the others indicate failure. When a failure reason code - * is received, one can assume that the channel is not connected. + * A reason code of xpMsgReceived indicates that a XPC message arrived from + * the specified partition on the specified channel. The data argument + * specifies the address of the message's payload. The user must call + * xpc_received() when finished with the payload. * - * - * Reason Code | Cause | Optional Data - * =====================+================================+===================== - * xpcConnected | connection has been established| max #of entries - * | to the specified partition on | allowed in message - * | the specified channel | queue - * ---------------------+--------------------------------+--------------------- - * xpcMsgReceived | an XPC message arrived from | address of payload - * | the specified partition on the | - * | specified channel | [the user must call - * | | xpc_received() when - * | | finished with the - * | | payload] - * ---------------------+--------------------------------+--------------------- - * xpcMsgDelivered | notification that the message | NA - * | was delivered to the intended | - * | recipient and that they have | - * | acknowledged its receipt by | - * | calling xpc_received() | - * =====================+================================+===================== - * xpcUnequalMsgSizes | can't connect to the specified | NULL - * | partition on the specified | - * | channel because of mismatched | - * | message sizes | - * ---------------------+--------------------------------+--------------------- - * xpcNoMemory | insufficient memory avaiable | NULL - * | to allocate message queue | - * ---------------------+--------------------------------+--------------------- - * xpcLackOfResources | lack of resources to create | NULL - * | the necessary kthreads to | - * | support the channel | - * ---------------------+--------------------------------+--------------------- - * xpcUnregistering | this side's user has | NULL or NA - * | unregistered by calling | - * | xpc_disconnect() | - * ---------------------+--------------------------------+--------------------- - * xpcOtherUnregistering| the other side's user has | NULL or NA - * | unregistered by calling | - * | xpc_disconnect() | - * ---------------------+--------------------------------+--------------------- - * xpcNoHeartbeat | the other side's XPC is no | NULL or NA - * | longer heartbeating | - * | | - * ---------------------+--------------------------------+--------------------- - * xpcUnloading | this side's XPC module is | NULL or NA - * | being unloaded | - * | | - * ---------------------+--------------------------------+--------------------- - * xpcOtherUnloading | the other side's XPC module is | NULL or NA - * | is being unloaded | - * | | - * ---------------------+--------------------------------+--------------------- - * xpcPioReadError | xp_nofault_PIOR() returned an | NULL or NA - * | error while sending an IPI | - * | | - * ---------------------+--------------------------------+--------------------- - * xpcInvalidAddress | the address either received or | NULL or NA - * | sent by the specified partition| - * | is invalid | - * ---------------------+--------------------------------+--------------------- - * xpcBteNotAvailable | attempt to pull data from the | NULL or NA - * xpcBtePoisonError | specified partition over the | - * xpcBteWriteError | specified channel via a | - * xpcBteAccessError | bte_copy() failed | - * xpcBteTimeOutError | | - * xpcBteXtalkError | | - * xpcBteDirectoryError | | - * xpcBteGenericError | | - * xpcBteUnmappedError | | - * ---------------------+--------------------------------+--------------------- - * xpcUnknownReason | the specified channel to the | NULL or NA - * | specified partition was | - * | unavailable for unknown reasons| - * =====================+================================+===================== + * All other reason codes indicate failure. The data argmument is NULL. + * When a failure reason code is received, one can assume that the channel + * is not connected. */ - -typedef void (*xpc_channel_func) (enum xpc_retval reason, partid_t partid, +typedef void (*xpc_channel_func) (enum xp_retval reason, short partid, int ch_number, void *data, void *key); -typedef void (*xpc_notify_func) (enum xpc_retval reason, partid_t partid, +/* + * Define the callout function type used by XPC to notify the user of + * messages received and delivered via the user function registered by + * xpc_send_notify(). + * + * Arguments: + * + * reason - reason code. + * partid - partition ID associated with condition. + * ch_number - channel # associated with condition. + * key - pointer to optional user-defined value provided as the "key" + * argument to xpc_send_notify(). + * + * A reason code of xpMsgDelivered indicates that the message was delivered + * to the intended recipient and that they have acknowledged its receipt by + * calling xpc_received(). + * + * All other reason codes indicate failure. + */ +typedef void (*xpc_notify_func) (enum xp_retval reason, short partid, int ch_number, void *key); /* @@ -401,57 +322,57 @@ struct xpc_registration { struct xpc_interface { void (*connect) (int); void (*disconnect) (int); - enum xpc_retval (*allocate) (partid_t, int, u32, void **); - enum xpc_retval (*send) (partid_t, int, void *); - enum xpc_retval (*send_notify) (partid_t, int, void *, + enum xp_retval (*allocate) (short, int, u32, void **); + enum xp_retval (*send) (short, int, void *); + enum xp_retval (*send_notify) (short, int, void *, xpc_notify_func, void *); - void (*received) (partid_t, int, void *); - enum xpc_retval (*partid_to_nasids) (partid_t, void *); + void (*received) (short, int, void *); + enum xp_retval (*partid_to_nasids) (short, void *); }; extern struct xpc_interface xpc_interface; extern void xpc_set_interface(void (*)(int), void (*)(int), - enum xpc_retval (*)(partid_t, int, u32, void **), - enum xpc_retval (*)(partid_t, int, void *), - enum xpc_retval (*)(partid_t, int, void *, + enum xp_retval (*)(short, int, u32, void **), + enum xp_retval (*)(short, int, void *), + enum xp_retval (*)(short, int, void *, xpc_notify_func, void *), - void (*)(partid_t, int, void *), - enum xpc_retval (*)(partid_t, void *)); + void (*)(short, int, void *), + enum xp_retval (*)(short, void *)); extern void xpc_clear_interface(void); -extern enum xpc_retval xpc_connect(int, xpc_channel_func, void *, u16, +extern enum xp_retval xpc_connect(int, xpc_channel_func, void *, u16, u16, u32, u32); extern void xpc_disconnect(int); -static inline enum xpc_retval -xpc_allocate(partid_t partid, int ch_number, u32 flags, void **payload) +static inline enum xp_retval +xpc_allocate(short partid, int ch_number, u32 flags, void **payload) { return xpc_interface.allocate(partid, ch_number, flags, payload); } -static inline enum xpc_retval -xpc_send(partid_t partid, int ch_number, void *payload) +static inline enum xp_retval +xpc_send(short partid, int ch_number, void *payload) { return xpc_interface.send(partid, ch_number, payload); } -static inline enum xpc_retval -xpc_send_notify(partid_t partid, int ch_number, void *payload, +static inline enum xp_retval +xpc_send_notify(short partid, int ch_number, void *payload, xpc_notify_func func, void *key) { return xpc_interface.send_notify(partid, ch_number, payload, func, key); } static inline void -xpc_received(partid_t partid, int ch_number, void *payload) +xpc_received(short partid, int ch_number, void *payload) { return xpc_interface.received(partid, ch_number, payload); } -static inline enum xpc_retval -xpc_partid_to_nasids(partid_t partid, void *nasids) +static inline enum xp_retval +xpc_partid_to_nasids(short partid, void *nasids) { return xpc_interface.partid_to_nasids(partid, nasids); } |