diff options
Diffstat (limited to 'drivers/net/ethernet/amd/nmclan_cs.c')
| -rw-r--r-- | drivers/net/ethernet/amd/nmclan_cs.c | 1525 |
1 files changed, 1525 insertions, 0 deletions
diff --git a/drivers/net/ethernet/amd/nmclan_cs.c b/drivers/net/ethernet/amd/nmclan_cs.c new file mode 100644 index 000000000000..9d70b6595220 --- /dev/null +++ b/drivers/net/ethernet/amd/nmclan_cs.c @@ -0,0 +1,1525 @@ +/* ---------------------------------------------------------------------------- +Linux PCMCIA ethernet adapter driver for the New Media Ethernet LAN. + nmclan_cs.c,v 0.16 1995/07/01 06:42:17 rpao Exp rpao + + The Ethernet LAN uses the Advanced Micro Devices (AMD) Am79C940 Media + Access Controller for Ethernet (MACE). It is essentially the Am2150 + PCMCIA Ethernet card contained in the Am2150 Demo Kit. + +Written by Roger C. Pao <rpao@paonet.org> + Copyright 1995 Roger C. Pao + Linux 2.5 cleanups Copyright Red Hat 2003 + + This software may be used and distributed according to the terms of + the GNU General Public License. + +Ported to Linux 1.3.* network driver environment by + Matti Aarnio <mea@utu.fi> + +References + + Am2150 Technical Reference Manual, Revision 1.0, August 17, 1993 + Am79C940 (MACE) Data Sheet, 1994 + Am79C90 (C-LANCE) Data Sheet, 1994 + Linux PCMCIA Programmer's Guide v1.17 + /usr/src/linux/net/inet/dev.c, Linux kernel 1.2.8 + + Eric Mears, New Media Corporation + Tom Pollard, New Media Corporation + Dean Siasoyco, New Media Corporation + Ken Lesniak, Silicon Graphics, Inc. <lesniak@boston.sgi.com> + Donald Becker <becker@scyld.com> + David Hinds <dahinds@users.sourceforge.net> + + The Linux client driver is based on the 3c589_cs.c client driver by + David Hinds. + + The Linux network driver outline is based on the 3c589_cs.c driver, + the 8390.c driver, and the example skeleton.c kernel code, which are + by Donald Becker. + + The Am2150 network driver hardware interface code is based on the + OS/9000 driver for the New Media Ethernet LAN by Eric Mears. + + Special thanks for testing and help in debugging this driver goes + to Ken Lesniak. + +------------------------------------------------------------------------------- +Driver Notes and Issues +------------------------------------------------------------------------------- + +1. Developed on a Dell 320SLi + PCMCIA Card Services 2.6.2 + Linux dell 1.2.10 #1 Thu Jun 29 20:23:41 PDT 1995 i386 + +2. rc.pcmcia may require loading pcmcia_core with io_speed=300: + 'insmod pcmcia_core.o io_speed=300'. + This will avoid problems with fast systems which causes rx_framecnt + to return random values. + +3. If hot extraction does not work for you, use 'ifconfig eth0 down' + before extraction. + +4. There is a bad slow-down problem in this driver. + +5. Future: Multicast processing. In the meantime, do _not_ compile your + kernel with multicast ip enabled. + +------------------------------------------------------------------------------- +History +------------------------------------------------------------------------------- +Log: nmclan_cs.c,v + * 2.5.75-ac1 2003/07/11 Alan Cox <alan@lxorguk.ukuu.org.uk> + * Fixed hang on card eject as we probe it + * Cleaned up to use new style locking. + * + * Revision 0.16 1995/07/01 06:42:17 rpao + * Bug fix: nmclan_reset() called CardServices incorrectly. + * + * Revision 0.15 1995/05/24 08:09:47 rpao + * Re-implement MULTI_TX dev->tbusy handling. + * + * Revision 0.14 1995/05/23 03:19:30 rpao + * Added, in nmclan_config(), "tuple.Attributes = 0;". + * Modified MACE ID check to ignore chip revision level. + * Avoid tx_free_frames race condition between _start_xmit and _interrupt. + * + * Revision 0.13 1995/05/18 05:56:34 rpao + * Statistics changes. + * Bug fix: nmclan_reset did not enable TX and RX: call restore_multicast_list. + * Bug fix: mace_interrupt checks ~MACE_IMR_DEFAULT. Fixes driver lockup. + * + * Revision 0.12 1995/05/14 00:12:23 rpao + * Statistics overhaul. + * + +95/05/13 rpao V0.10a + Bug fix: MACE statistics counters used wrong I/O ports. + Bug fix: mace_interrupt() needed to allow statistics to be + processed without RX or TX interrupts pending. +95/05/11 rpao V0.10 + Multiple transmit request processing. + Modified statistics to use MACE counters where possible. +95/05/10 rpao V0.09 Bug fix: Must use IO_DATA_PATH_WIDTH_AUTO. + *Released +95/05/10 rpao V0.08 + Bug fix: Make all non-exported functions private by using + static keyword. + Bug fix: Test IntrCnt _before_ reading MACE_IR. +95/05/10 rpao V0.07 Statistics. +95/05/09 rpao V0.06 Fix rx_framecnt problem by addition of PCIC wait states. + +---------------------------------------------------------------------------- */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#define DRV_NAME "nmclan_cs" +#define DRV_VERSION "0.16" + + +/* ---------------------------------------------------------------------------- +Conditional Compilation Options +---------------------------------------------------------------------------- */ + +#define MULTI_TX 0 +#define RESET_ON_TIMEOUT 1 +#define TX_INTERRUPTABLE 1 +#define RESET_XILINX 0 + +/* ---------------------------------------------------------------------------- +Include Files +---------------------------------------------------------------------------- */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/in.h> +#include <linux/delay.h> +#include <linux/ethtool.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/if_arp.h> +#include <linux/ioport.h> +#include <linux/bitops.h> + +#include <pcmcia/cisreg.h> +#include <pcmcia/cistpl.h> +#include <pcmcia/ds.h> + +#include <asm/uaccess.h> +#include <asm/io.h> +#include <asm/system.h> + +/* ---------------------------------------------------------------------------- +Defines +---------------------------------------------------------------------------- */ + +#define ETHER_ADDR_LEN ETH_ALEN + /* 6 bytes in an Ethernet Address */ +#define MACE_LADRF_LEN 8 + /* 8 bytes in Logical Address Filter */ + +/* Loop Control Defines */ +#define MACE_MAX_IR_ITERATIONS 10 +#define MACE_MAX_RX_ITERATIONS 12 + /* + TBD: Dean brought this up, and I assumed the hardware would + handle it: + + If MACE_MAX_RX_ITERATIONS is > 1, rx_framecnt may still be + non-zero when the isr exits. We may not get another interrupt + to process the remaining packets for some time. + */ + +/* +The Am2150 has a Xilinx XC3042 field programmable gate array (FPGA) +which manages the interface between the MACE and the PCMCIA bus. It +also includes buffer management for the 32K x 8 SRAM to control up to +four transmit and 12 receive frames at a time. +*/ +#define AM2150_MAX_TX_FRAMES 4 +#define AM2150_MAX_RX_FRAMES 12 + +/* Am2150 Ethernet Card I/O Mapping */ +#define AM2150_RCV 0x00 +#define AM2150_XMT 0x04 +#define AM2150_XMT_SKIP 0x09 +#define AM2150_RCV_NEXT 0x0A +#define AM2150_RCV_FRAME_COUNT 0x0B +#define AM2150_MACE_BANK 0x0C +#define AM2150_MACE_BASE 0x10 + +/* MACE Registers */ +#define MACE_RCVFIFO 0 +#define MACE_XMTFIFO 1 +#define MACE_XMTFC 2 +#define MACE_XMTFS 3 +#define MACE_XMTRC 4 +#define MACE_RCVFC 5 +#define MACE_RCVFS 6 +#define MACE_FIFOFC 7 +#define MACE_IR 8 +#define MACE_IMR 9 +#define MACE_PR 10 +#define MACE_BIUCC 11 +#define MACE_FIFOCC 12 +#define MACE_MACCC 13 +#define MACE_PLSCC 14 +#define MACE_PHYCC 15 +#define MACE_CHIPIDL 16 +#define MACE_CHIPIDH 17 +#define MACE_IAC 18 +/* Reserved */ +#define MACE_LADRF 20 +#define MACE_PADR 21 +/* Reserved */ +/* Reserved */ +#define MACE_MPC 24 +/* Reserved */ +#define MACE_RNTPC 26 +#define MACE_RCVCC 27 +/* Reserved */ +#define MACE_UTR 29 +#define MACE_RTR1 30 +#define MACE_RTR2 31 + +/* MACE Bit Masks */ +#define MACE_XMTRC_EXDEF 0x80 +#define MACE_XMTRC_XMTRC 0x0F + +#define MACE_XMTFS_XMTSV 0x80 +#define MACE_XMTFS_UFLO 0x40 +#define MACE_XMTFS_LCOL 0x20 +#define MACE_XMTFS_MORE 0x10 +#define MACE_XMTFS_ONE 0x08 +#define MACE_XMTFS_DEFER 0x04 +#define MACE_XMTFS_LCAR 0x02 +#define MACE_XMTFS_RTRY 0x01 + +#define MACE_RCVFS_RCVSTS 0xF000 +#define MACE_RCVFS_OFLO 0x8000 +#define MACE_RCVFS_CLSN 0x4000 +#define MACE_RCVFS_FRAM 0x2000 +#define MACE_RCVFS_FCS 0x1000 + +#define MACE_FIFOFC_RCVFC 0xF0 +#define MACE_FIFOFC_XMTFC 0x0F + +#define MACE_IR_JAB 0x80 +#define MACE_IR_BABL 0x40 +#define MACE_IR_CERR 0x20 +#define MACE_IR_RCVCCO 0x10 +#define MACE_IR_RNTPCO 0x08 +#define MACE_IR_MPCO 0x04 +#define MACE_IR_RCVINT 0x02 +#define MACE_IR_XMTINT 0x01 + +#define MACE_MACCC_PROM 0x80 +#define MACE_MACCC_DXMT2PD 0x40 +#define MACE_MACCC_EMBA 0x20 +#define MACE_MACCC_RESERVED 0x10 +#define MACE_MACCC_DRCVPA 0x08 +#define MACE_MACCC_DRCVBC 0x04 +#define MACE_MACCC_ENXMT 0x02 +#define MACE_MACCC_ENRCV 0x01 + +#define MACE_PHYCC_LNKFL 0x80 +#define MACE_PHYCC_DLNKTST 0x40 +#define MACE_PHYCC_REVPOL 0x20 +#define MACE_PHYCC_DAPC 0x10 +#define MACE_PHYCC_LRT 0x08 +#define MACE_PHYCC_ASEL 0x04 +#define MACE_PHYCC_RWAKE 0x02 +#define MACE_PHYCC_AWAKE 0x01 + +#define MACE_IAC_ADDRCHG 0x80 +#define MACE_IAC_PHYADDR 0x04 +#define MACE_IAC_LOGADDR 0x02 + +#define MACE_UTR_RTRE 0x80 +#define MACE_UTR_RTRD 0x40 +#define MACE_UTR_RPA 0x20 +#define MACE_UTR_FCOLL 0x10 +#define MACE_UTR_RCVFCSE 0x08 +#define MACE_UTR_LOOP_INCL_MENDEC 0x06 +#define MACE_UTR_LOOP_NO_MENDEC 0x04 +#define MACE_UTR_LOOP_EXTERNAL 0x02 +#define MACE_UTR_LOOP_NONE 0x00 +#define MACE_UTR_RESERVED 0x01 + +/* Switch MACE register bank (only 0 and 1 are valid) */ +#define MACEBANK(win_num) outb((win_num), ioaddr + AM2150_MACE_BANK) + +#define MACE_IMR_DEFAULT \ + (0xFF - \ + ( \ + MACE_IR_CERR | \ + MACE_IR_RCVCCO | \ + MACE_IR_RNTPCO | \ + MACE_IR_MPCO | \ + MACE_IR_RCVINT | \ + MACE_IR_XMTINT \ + ) \ + ) +#undef MACE_IMR_DEFAULT +#define MACE_IMR_DEFAULT 0x00 /* New statistics handling: grab everything */ + +#define TX_TIMEOUT ((400*HZ)/1000) + +/* ---------------------------------------------------------------------------- +Type Definitions +---------------------------------------------------------------------------- */ + +typedef struct _mace_statistics { + /* MACE_XMTFS */ + int xmtsv; + int uflo; + int lcol; + int more; + int one; + int defer; + int lcar; + int rtry; + + /* MACE_XMTRC */ + int exdef; + int xmtrc; + + /* RFS1--Receive Status (RCVSTS) */ + int oflo; + int clsn; + int fram; + int fcs; + + /* RFS2--Runt Packet Count (RNTPC) */ + int rfs_rntpc; + + /* RFS3--Receive Collision Count (RCVCC) */ + int rfs_rcvcc; + + /* MACE_IR */ + int jab; + int babl; + int cerr; + int rcvcco; + int rntpco; + int mpco; + + /* MACE_MPC */ + int mpc; + + /* MACE_RNTPC */ + int rntpc; + + /* MACE_RCVCC */ + int rcvcc; +} mace_statistics; + +typedef struct _mace_private { + struct pcmcia_device *p_dev; + struct net_device_stats linux_stats; /* Linux statistics counters */ + mace_statistics mace_stats; /* MACE chip statistics counters */ + + /* restore_multicast_list() state variables */ + int multicast_ladrf[MACE_LADRF_LEN]; /* Logical address filter */ + int multicast_num_addrs; + + char tx_free_frames; /* Number of free transmit frame buffers */ + char tx_irq_disabled; /* MACE TX interrupt disabled */ + + spinlock_t bank_lock; /* Must be held if you step off bank 0 */ +} mace_private; + +/* ---------------------------------------------------------------------------- +Private Global Variables +---------------------------------------------------------------------------- */ + +static const char *if_names[]={ + "Auto", "10baseT", "BNC", +}; + +/* ---------------------------------------------------------------------------- +Parameters + These are the parameters that can be set during loading with + 'insmod'. +---------------------------------------------------------------------------- */ + +MODULE_DESCRIPTION("New Media PCMCIA ethernet driver"); +MODULE_LICENSE("GPL"); + +#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0) + +/* 0=auto, 1=10baseT, 2 = 10base2, default=auto */ +INT_MODULE_PARM(if_port, 0); + + +/* ---------------------------------------------------------------------------- +Function Prototypes +---------------------------------------------------------------------------- */ + +static int nmclan_config(struct pcmcia_device *link); +static void nmclan_release(struct pcmcia_device *link); + +static void nmclan_reset(struct net_device *dev); +static int mace_config(struct net_device *dev, struct ifmap *map); +static int mace_open(struct net_device *dev); +static int mace_close(struct net_device *dev); +static netdev_tx_t mace_start_xmit(struct sk_buff *skb, + struct net_device *dev); +static void mace_tx_timeout(struct net_device *dev); +static irqreturn_t mace_interrupt(int irq, void *dev_id); +static struct net_device_stats *mace_get_stats(struct net_device *dev); +static int mace_rx(struct net_device *dev, unsigned char RxCnt); +static void restore_multicast_list(struct net_device *dev); +static void set_multicast_list(struct net_device *dev); +static const struct ethtool_ops netdev_ethtool_ops; + + +static void nmclan_detach(struct pcmcia_device *p_dev); + +static const struct net_device_ops mace_netdev_ops = { + .ndo_open = mace_open, + .ndo_stop = mace_close, + .ndo_start_xmit = mace_start_xmit, + .ndo_tx_timeout = mace_tx_timeout, + .ndo_set_config = mace_config, + .ndo_get_stats = mace_get_stats, + .ndo_set_multicast_list = set_multicast_list, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + +static int nmclan_probe(struct pcmcia_device *link) +{ + mace_private *lp; + struct net_device *dev; + + dev_dbg(&link->dev, "nmclan_attach()\n"); + + /* Create new ethernet device */ + dev = alloc_etherdev(sizeof(mace_private)); + if (!dev) + return -ENOMEM; + lp = netdev_priv(dev); + lp->p_dev = link; + link->priv = dev; + + spin_lock_init(&lp->bank_lock); + link->resource[0]->end = 32; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + link->config_flags |= CONF_ENABLE_IRQ; + link->config_index = 1; + link->config_regs = PRESENT_OPTION; + + lp->tx_free_frames=AM2150_MAX_TX_FRAMES; + + dev->netdev_ops = &mace_netdev_ops; + SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops); + dev->watchdog_timeo = TX_TIMEOUT; + + return nmclan_config(link); +} /* nmclan_attach */ + +static void nmclan_detach(struct pcmcia_device *link) +{ + struct net_device *dev = link->priv; + + dev_dbg(&link->dev, "nmclan_detach\n"); + + unregister_netdev(dev); + + nmclan_release(link); + + free_netdev(dev); +} /* nmclan_detach */ + +/* ---------------------------------------------------------------------------- +mace_read + Reads a MACE register. This is bank independent; however, the + caller must ensure that this call is not interruptable. We are + assuming that during normal operation, the MACE is always in + bank 0. +---------------------------------------------------------------------------- */ +static int mace_read(mace_private *lp, unsigned int ioaddr, int reg) +{ + int data = 0xFF; + unsigned long flags; + + switch (reg >> 4) { + case 0: /* register 0-15 */ + data = inb(ioaddr + AM2150_MACE_BASE + reg); + break; + case 1: /* register 16-31 */ + spin_lock_irqsave(&lp->bank_lock, flags); + MACEBANK(1); + data = inb(ioaddr + AM2150_MACE_BASE + (reg & 0x0F)); + MACEBANK(0); + spin_unlock_irqrestore(&lp->bank_lock, flags); + break; + } + return data & 0xFF; +} /* mace_read */ + +/* ---------------------------------------------------------------------------- +mace_write + Writes to a MACE register. This is bank independent; however, + the caller must ensure that this call is not interruptable. We + are assuming that during normal operation, the MACE is always in + bank 0. +---------------------------------------------------------------------------- */ +static void mace_write(mace_private *lp, unsigned int ioaddr, int reg, + int data) +{ + unsigned long flags; + + switch (reg >> 4) { + case 0: /* register 0-15 */ + outb(data & 0xFF, ioaddr + AM2150_MACE_BASE + reg); + break; + case 1: /* register 16-31 */ + spin_lock_irqsave(&lp->bank_lock, flags); + MACEBANK(1); + outb(data & 0xFF, ioaddr + AM2150_MACE_BASE + (reg & 0x0F)); + MACEBANK(0); + spin_unlock_irqrestore(&lp->bank_lock, flags); + break; + } +} /* mace_write */ + +/* ---------------------------------------------------------------------------- +mace_init + Resets the MACE chip. +---------------------------------------------------------------------------- */ +static int mace_init(mace_private *lp, unsigned int ioaddr, char *enet_addr) +{ + int i; + int ct = 0; + + /* MACE Software reset */ + mace_write(lp, ioaddr, MACE_BIUCC, 1); + while (mace_read(lp, ioaddr, MACE_BIUCC) & 0x01) { + /* Wait for reset bit to be cleared automatically after <= 200ns */; + if(++ct > 500) + { + pr_err("reset failed, card removed?\n"); + return -1; + } + udelay(1); + } + mace_write(lp, ioaddr, MACE_BIUCC, 0); + + /* The Am2150 requires that the MACE FIFOs operate in burst mode. */ + mace_write(lp, ioaddr, MACE_FIFOCC, 0x0F); + + mace_write(lp,ioaddr, MACE_RCVFC, 0); /* Disable Auto Strip Receive */ + mace_write(lp, ioaddr, MACE_IMR, 0xFF); /* Disable all interrupts until _open */ + + /* + * Bit 2-1 PORTSEL[1-0] Port Select. + * 00 AUI/10Base-2 + * 01 10Base-T + * 10 DAI Port (reserved in Am2150) + * 11 GPSI + * For this card, only the first two are valid. + * So, PLSCC should be set to + * 0x00 for 10Base-2 + * 0x02 for 10Base-T + * Or just set ASEL in PHYCC below! + */ + switch (if_port) { + case 1: + mace_write(lp, ioaddr, MACE_PLSCC, 0x02); + break; + case 2: + mace_write(lp, ioaddr, MACE_PLSCC, 0x00); + break; + default: + mace_write(lp, ioaddr, MACE_PHYCC, /* ASEL */ 4); + /* ASEL Auto Select. When set, the PORTSEL[1-0] bits are overridden, + and the MACE device will automatically select the operating media + interface port. */ + break; + } + + mace_write(lp, ioaddr, MACE_IAC, MACE_IAC_ADDRCHG | MACE_IAC_PHYADDR); + /* Poll ADDRCHG bit */ + ct = 0; + while (mace_read(lp, ioaddr, MACE_IAC) & MACE_IAC_ADDRCHG) + { + if(++ ct > 500) + { + pr_err("ADDRCHG timeout, card removed?\n"); + return -1; + } + } + /* Set PADR register */ + for (i = 0; i < ETHER_ADDR_LEN; i++) + mace_write(lp, ioaddr, MACE_PADR, enet_addr[i]); + + /* MAC Configuration Control Register should be written last */ + /* Let set_multicast_list set this. */ + /* mace_write(lp, ioaddr, MACE_MACCC, MACE_MACCC_ENXMT | MACE_MACCC_ENRCV); */ + mace_write(lp, ioaddr, MACE_MACCC, 0x00); + return 0; +} /* mace_init */ + +static int nmclan_config(struct pcmcia_device *link) +{ + struct net_device *dev = link->priv; + mace_private *lp = netdev_priv(dev); + u8 *buf; + size_t len; + int i, ret; + unsigned int ioaddr; + + dev_dbg(&link->dev, "nmclan_config\n"); + + link->io_lines = 5; + ret = pcmcia_request_io(link); + if (ret) + goto failed; + ret = pcmcia_request_exclusive_irq(link, mace_interrupt); + if (ret) + goto failed; + ret = pcmcia_enable_device(link); + if (ret) + goto failed; + + dev->irq = link->irq; + dev->base_addr = link->resource[0]->start; + + ioaddr = dev->base_addr; + + /* Read the ethernet address from the CIS. */ + len = pcmcia_get_tuple(link, 0x80, &buf); + if (!buf || len < ETHER_ADDR_LEN) { + kfree(buf); + goto failed; + } + memcpy(dev->dev_addr, buf, ETHER_ADDR_LEN); + kfree(buf); + + /* Verify configuration by reading the MACE ID. */ + { + char sig[2]; + + sig[0] = mace_read(lp, ioaddr, MACE_CHIPIDL); + sig[1] = mace_read(lp, ioaddr, MACE_CHIPIDH); + if ((sig[0] == 0x40) && ((sig[1] & 0x0F) == 0x09)) { + dev_dbg(&link->dev, "nmclan_cs configured: mace id=%x %x\n", + sig[0], sig[1]); + } else { + pr_notice("mace id not found: %x %x should be 0x40 0x?9\n", + sig[0], sig[1]); + return -ENODEV; + } + } + + if(mace_init(lp, ioaddr, dev->dev_addr) == -1) + goto failed; + + /* The if_port symbol can be set when the module is loaded */ + if (if_port <= 2) + dev->if_port = if_port; + else + pr_notice("invalid if_port requested\n"); + + SET_NETDEV_DEV(dev, &link->dev); + + i = register_netdev(dev); + if (i != 0) { + pr_notice("register_netdev() failed\n"); + goto failed; + } + + netdev_info(dev, "nmclan: port %#3lx, irq %d, %s port, hw_addr %pM\n", + dev->base_addr, dev->irq, if_names[dev->if_port], dev->dev_addr); + return 0; + +failed: + nmclan_release(link); + return -ENODEV; +} /* nmclan_config */ + +static void nmclan_release(struct pcmcia_device *link) +{ + dev_dbg(&link->dev, "nmclan_release\n"); + pcmcia_disable_device(link); +} + +static int nmclan_suspend(struct pcmcia_device *link) +{ + struct net_device *dev = link->priv; + + if (link->open) + netif_device_detach(dev); + + return 0; +} + +static int nmclan_resume(struct pcmcia_device *link) +{ + struct net_device *dev = link->priv; + + if (link->open) { + nmclan_reset(dev); + netif_device_attach(dev); + } + + return 0; +} + + +/* ---------------------------------------------------------------------------- +nmclan_reset + Reset and restore all of the Xilinx and MACE registers. +---------------------------------------------------------------------------- */ +static void nmclan_reset(struct net_device *dev) +{ + mace_private *lp = netdev_priv(dev); + +#if RESET_XILINX + struct pcmcia_device *link = &lp->link; + u8 OrigCorValue; + + /* Save original COR value */ + pcmcia_read_config_byte(link, CISREG_COR, &OrigCorValue); + + /* Reset Xilinx */ + dev_dbg(&link->dev, "nmclan_reset: OrigCorValue=0x%x, resetting...\n", + OrigCorValue); + pcmcia_write_config_byte(link, CISREG_COR, COR_SOFT_RESET); + /* Need to wait for 20 ms for PCMCIA to finish reset. */ + + /* Restore original COR configuration index */ + pcmcia_write_config_byte(link, CISREG_COR, + (COR_LEVEL_REQ | (OrigCorValue & COR_CONFIG_MASK))); + /* Xilinx is now completely reset along with the MACE chip. */ + lp->tx_free_frames=AM2150_MAX_TX_FRAMES; + +#endif /* #if RESET_XILINX */ + + /* Xilinx is now completely reset along with the MACE chip. */ + lp->tx_free_frames=AM2150_MAX_TX_FRAMES; + + /* Reinitialize the MACE chip for operation. */ + mace_init(lp, dev->base_addr, dev->dev_addr); + mace_write(lp, dev->base_addr, MACE_IMR, MACE_IMR_DEFAULT); + + /* Restore the multicast list and enable TX and RX. */ + restore_multicast_list(dev); +} /* nmclan_reset */ + +/* ---------------------------------------------------------------------------- +mace_config + [Someone tell me what this is supposed to do? Is if_port a defined + standard? If so, there should be defines to indicate 1=10Base-T, + 2=10Base-2, etc. including limited automatic detection.] +---------------------------------------------------------------------------- */ +static int mace_config(struct net_device *dev, struct ifmap *map) +{ + if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) { + if (map->port <= 2) { + dev->if_port = map->port; + netdev_info(dev, "switched to %s port\n", if_names[dev->if_port]); + } else + return -EINVAL; + } + return 0; +} /* mace_config */ + +/* ---------------------------------------------------------------------------- +mace_open + Open device driver. +---------------------------------------------------------------------------- */ +static int mace_open(struct net_device *dev) +{ + unsigned int ioaddr = dev->base_addr; + mace_private *lp = netdev_priv(dev); + struct pcmcia_device *link = lp->p_dev; + + if (!pcmcia_dev_present(link)) + return -ENODEV; + + link->open++; + + MACEBANK(0); + + netif_start_queue(dev); + nmclan_reset(dev); + + return 0; /* Always succeed */ +} /* mace_open */ + +/* ---------------------------------------------------------------------------- +mace_close + Closes device driver. +---------------------------------------------------------------------------- */ +static int mace_close(struct net_device *dev) +{ + unsigned int ioaddr = dev->base_addr; + mace_private *lp = netdev_priv(dev); + struct pcmcia_device *link = lp->p_dev; + + dev_dbg(&link->dev, "%s: shutting down ethercard.\n", dev->name); + + /* Mask off all interrupts from the MACE chip. */ + outb(0xFF, ioaddr + AM2150_MACE_BASE + MACE_IMR); + + link->open--; + netif_stop_queue(dev); + + return 0; +} /* mace_close */ + +static void netdev_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); + sprintf(info->bus_info, "PCMCIA 0x%lx", dev->base_addr); +} + +static const struct ethtool_ops netdev_ethtool_ops = { + .get_drvinfo = netdev_get_drvinfo, +}; + +/* ---------------------------------------------------------------------------- +mace_start_xmit + This routine begins the packet transmit function. When completed, + it will generate a transmit interrupt. + + According to /usr/src/linux/net/inet/dev.c, if _start_xmit + returns 0, the "packet is now solely the responsibility of the + driver." If _start_xmit returns non-zero, the "transmission + failed, put skb back into a list." +---------------------------------------------------------------------------- */ + +static void mace_tx_timeout(struct net_device *dev) +{ + mace_private *lp = netdev_priv(dev); + struct pcmcia_device *link = lp->p_dev; + + netdev_notice(dev, "transmit timed out -- "); +#if RESET_ON_TIMEOUT + pr_cont("resetting card\n"); + pcmcia_reset_card(link->socket); +#else /* #if RESET_ON_TIMEOUT */ + pr_cont("NOT resetting card\n"); +#endif /* #if RESET_ON_TIMEOUT */ + dev->trans_start = jiffies; /* prevent tx timeout */ + netif_wake_queue(dev); +} + +static netdev_tx_t mace_start_xmit(struct sk_buff *skb, + struct net_device *dev) +{ + mace_private *lp = netdev_priv(dev); + unsigned int ioaddr = dev->base_addr; + + netif_stop_queue(dev); + + pr_debug("%s: mace_start_xmit(length = %ld) called.\n", + dev->name, (long)skb->len); + +#if (!TX_INTERRUPTABLE) + /* Disable MACE TX interrupts. */ + outb(MACE_IMR_DEFAULT | MACE_IR_XMTINT, + ioaddr + AM2150_MACE_BASE + MACE_IMR); + lp->tx_irq_disabled=1; +#endif /* #if (!TX_INTERRUPTABLE) */ + + { + /* This block must not be interrupted by another transmit request! + mace_tx_timeout will take care of timer-based retransmissions from + the upper layers. The interrupt handler is guaranteed never to + service a transmit interrupt while we are in here. + */ + + lp->linux_stats.tx_bytes += skb->len; + lp->tx_free_frames--; + + /* WARNING: Write the _exact_ number of bytes written in the header! */ + /* Put out the word header [must be an outw()] . . . */ + outw(skb->len, ioaddr + AM2150_XMT); + /* . . . and the packet [may be any combination of outw() and outb()] */ + outsw(ioaddr + AM2150_XMT, skb->data, skb->len >> 1); + if (skb->len & 1) { + /* Odd byte transfer */ + outb(skb->data[skb->len-1], ioaddr + AM2150_XMT); + } + +#if MULTI_TX + if (lp->tx_free_frames > 0) + netif_start_queue(dev); +#endif /* #if MULTI_TX */ + } + +#if (!TX_INTERRUPTABLE) + /* Re-enable MACE TX interrupts. */ + lp->tx_irq_disabled=0; + outb(MACE_IMR_DEFAULT, ioaddr + AM2150_MACE_BASE + MACE_IMR); +#endif /* #if (!TX_INTERRUPTABLE) */ + + dev_kfree_skb(skb); + + return NETDEV_TX_OK; +} /* mace_start_xmit */ + +/* ---------------------------------------------------------------------------- +mace_interrupt + The interrupt handler. +---------------------------------------------------------------------------- */ +static irqreturn_t mace_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = (struct net_device *) dev_id; + mace_private *lp = netdev_priv(dev); + unsigned int ioaddr; + int status; + int IntrCnt = MACE_MAX_IR_ITERATIONS; + + if (dev == NULL) { + pr_debug("mace_interrupt(): irq 0x%X for unknown device.\n", + irq); + return IRQ_NONE; + } + + ioaddr = dev->base_addr; + + if (lp->tx_irq_disabled) { + const char *msg; + if (lp->tx_irq_disabled) + msg = "Interrupt with tx_irq_disabled"; + else + msg = "Re-entering the interrupt handler"; + netdev_notice(dev, "%s [isr=%02X, imr=%02X]\n", + msg, + inb(ioaddr + AM2150_MACE_BASE + MACE_IR), + inb(ioaddr + AM2150_MACE_BASE + MACE_IMR)); + /* WARNING: MACE_IR has been read! */ + return IRQ_NONE; + } + + if (!netif_device_present(dev)) { + netdev_dbg(dev, "interrupt from dead card\n"); + return IRQ_NONE; + } + + do { + /* WARNING: MACE_IR is a READ/CLEAR port! */ + status = inb(ioaddr + AM2150_MACE_BASE + MACE_IR); + + pr_debug("mace_interrupt: irq 0x%X status 0x%X.\n", irq, status); + + if (status & MACE_IR_RCVINT) { + mace_rx(dev, MACE_MAX_RX_ITERATIONS); + } + + if (status & MACE_IR_XMTINT) { + unsigned char fifofc; + unsigned char xmtrc; + unsigned char xmtfs; + + fifofc = inb(ioaddr + AM2150_MACE_BASE + MACE_FIFOFC); + if ((fifofc & MACE_FIFOFC_XMTFC)==0) { + lp->linux_stats.tx_errors++; + outb(0xFF, ioaddr + AM2150_XMT_SKIP); + } + + /* Transmit Retry Count (XMTRC, reg 4) */ + xmtrc = inb(ioaddr + AM2150_MACE_BASE + MACE_XMTRC); + if (xmtrc & MACE_XMTRC_EXDEF) lp->mace_stats.exdef++; + lp->mace_stats.xmtrc += (xmtrc & MACE_XMTRC_XMTRC); + + if ( + (xmtfs = inb(ioaddr + AM2150_MACE_BASE + MACE_XMTFS)) & + MACE_XMTFS_XMTSV /* Transmit Status Valid */ + ) { + lp->mace_stats.xmtsv++; + + if (xmtfs & ~MACE_XMTFS_XMTSV) { + if (xmtfs & MACE_XMTFS_UFLO) { + /* Underflow. Indicates that the Transmit FIFO emptied before + the end of frame was reached. */ + lp->mace_stats.uflo++; + } + if (xmtfs & MACE_XMTFS_LCOL) { + /* Late Collision */ + lp->mace_stats.lcol++; + } + if (xmtfs & MACE_XMTFS_MORE) { + /* MORE than one retry was needed */ + lp->mace_stats.more++; + } + if (xmtfs & MACE_XMTFS_ONE) { + /* Exactly ONE retry occurred */ + lp->mace_stats.one++; + } + if (xmtfs & MACE_XMTFS_DEFER) { + /* Transmission was defered */ + lp->mace_stats.defer++; + } + if (xmtfs & MACE_XMTFS_LCAR) { + /* Loss of carrier */ + lp->mace_stats.lcar++; + } + if (xmtfs & MACE_XMTFS_RTRY) { + /* Retry error: transmit aborted after 16 attempts */ + lp->mace_stats.rtry++; + } + } /* if (xmtfs & ~MACE_XMTFS_XMTSV) */ + + } /* if (xmtfs & MACE_XMTFS_XMTSV) */ + + lp->linux_stats.tx_packets++; + lp->tx_free_frames++; + netif_wake_queue(dev); + } /* if (status & MACE_IR_XMTINT) */ + + if (status & ~MACE_IMR_DEFAULT & ~MACE_IR_RCVINT & ~MACE_IR_XMTINT) { + if (status & MACE_IR_JAB) { + /* Jabber Error. Excessive transmit duration (20-150ms). */ + lp->mace_stats.jab++; + } + if (status & MACE_IR_BABL) { + /* Babble Error. >1518 bytes transmitted. */ + lp->mace_stats.babl++; + } + if (status & MACE_IR_CERR) { + /* Collision Error. CERR indicates the absence of the + Signal Quality Error Test message after a packet + transmission. */ + lp->mace_stats.cerr++; + } + if (status & MACE_IR_RCVCCO) { + /* Receive Collision Count Overflow; */ + lp->mace_stats.rcvcco++; + } + if (status & MACE_IR_RNTPCO) { + /* Runt Packet Count Overflow */ + lp->mace_stats.rntpco++; + } + if (status & MACE_IR_MPCO) { + /* Missed Packet Count Overflow */ + lp->mace_stats.mpco++; + } + } /* if (status & ~MACE_IMR_DEFAULT & ~MACE_IR_RCVINT & ~MACE_IR_XMTINT) */ + + } while ((status & ~MACE_IMR_DEFAULT) && (--IntrCnt)); + + return IRQ_HANDLED; +} /* mace_interrupt */ + +/* ---------------------------------------------------------------------------- +mace_rx + Receives packets. +---------------------------------------------------------------------------- */ +static int mace_rx(struct net_device *dev, unsigned char RxCnt) +{ + mace_private *lp = netdev_priv(dev); + unsigned int ioaddr = dev->base_addr; + unsigned char rx_framecnt; + unsigned short rx_status; + + while ( + ((rx_framecnt = inb(ioaddr + AM2150_RCV_FRAME_COUNT)) > 0) && + (rx_framecnt <= 12) && /* rx_framecnt==0xFF if card is extracted. */ + (RxCnt--) + ) { + rx_status = inw(ioaddr + AM2150_RCV); + + pr_debug("%s: in mace_rx(), framecnt 0x%X, rx_status" + " 0x%X.\n", dev->name, rx_framecnt, rx_status); + + if (rx_status & MACE_RCVFS_RCVSTS) { /* Error, update stats. */ + lp->linux_stats.rx_errors++; + if (rx_status & MACE_RCVFS_OFLO) { + lp->mace_stats.oflo++; + } + if (rx_status & MACE_RCVFS_CLSN) { + lp->mace_stats.clsn++; + } + if (rx_status & MACE_RCVFS_FRAM) { + lp->mace_stats.fram++; + } + if (rx_status & MACE_RCVFS_FCS) { + lp->mace_stats.fcs++; + } + } else { + short pkt_len = (rx_status & ~MACE_RCVFS_RCVSTS) - 4; + /* Auto Strip is off, always subtract 4 */ + struct sk_buff *skb; + + lp->mace_stats.rfs_rntpc += inb(ioaddr + AM2150_RCV); + /* runt packet count */ + lp->mace_stats.rfs_rcvcc += inb(ioaddr + AM2150_RCV); + /* rcv collision count */ + + pr_debug(" receiving packet size 0x%X rx_status" + " 0x%X.\n", pkt_len, rx_status); + + skb = dev_alloc_skb(pkt_len+2); + + if (skb != NULL) { + skb_reserve(skb, 2); + insw(ioaddr + AM2150_RCV, skb_put(skb, pkt_len), pkt_len>>1); + if (pkt_len & 1) + *(skb_tail_pointer(skb) - 1) = inb(ioaddr + AM2150_RCV); + skb->protocol = eth_type_trans(skb, dev); + + netif_rx(skb); /* Send the packet to the upper (protocol) layers. */ + + lp->linux_stats.rx_packets++; + lp->linux_stats.rx_bytes += pkt_len; + outb(0xFF, ioaddr + AM2150_RCV_NEXT); /* skip to next frame */ + continue; + } else { + pr_debug("%s: couldn't allocate a sk_buff of size" + " %d.\n", dev->name, pkt_len); + lp->linux_stats.rx_dropped++; + } + } + outb(0xFF, ioaddr + AM2150_RCV_NEXT); /* skip to next frame */ + } /* while */ + + return 0; +} /* mace_rx */ + +/* ---------------------------------------------------------------------------- +pr_linux_stats +---------------------------------------------------------------------------- */ +static void pr_linux_stats(struct net_device_stats *pstats) +{ + pr_debug("pr_linux_stats\n"); + pr_debug(" rx_packets=%-7ld tx_packets=%ld\n", + (long)pstats->rx_packets, (long)pstats->tx_packets); + pr_debug(" rx_errors=%-7ld tx_errors=%ld\n", + (long)pstats->rx_errors, (long)pstats->tx_errors); + pr_debug(" rx_dropped=%-7ld tx_dropped=%ld\n", + (long)pstats->rx_dropped, (long)pstats->tx_dropped); + pr_debug(" multicast=%-7ld collisions=%ld\n", + (long)pstats->multicast, (long)pstats->collisions); + + pr_debug(" rx_length_errors=%-7ld rx_over_errors=%ld\n", + (long)pstats->rx_length_errors, (long)pstats->rx_over_errors); + pr_debug(" rx_crc_errors=%-7ld rx_frame_errors=%ld\n", + (long)pstats->rx_crc_errors, (long)pstats->rx_frame_errors); + pr_debug(" rx_fifo_errors=%-7ld rx_missed_errors=%ld\n", + (long)pstats->rx_fifo_errors, (long)pstats->rx_missed_errors); + + pr_debug(" tx_aborted_errors=%-7ld tx_carrier_errors=%ld\n", + (long)pstats->tx_aborted_errors, (long)pstats->tx_carrier_errors); + pr_debug(" tx_fifo_errors=%-7ld tx_heartbeat_errors=%ld\n", + (long)pstats->tx_fifo_errors, (long)pstats->tx_heartbeat_errors); + pr_debug(" tx_window_errors=%ld\n", + (long)pstats->tx_window_errors); +} /* pr_linux_stats */ + +/* ---------------------------------------------------------------------------- +pr_mace_stats +---------------------------------------------------------------------------- */ +static void pr_mace_stats(mace_statistics *pstats) +{ + pr_debug("pr_mace_stats\n"); + + pr_debug(" xmtsv=%-7d uflo=%d\n", + pstats->xmtsv, pstats->uflo); + pr_debug(" lcol=%-7d more=%d\n", + pstats->lcol, pstats->more); + pr_debug(" one=%-7d defer=%d\n", + pstats->one, pstats->defer); + pr_debug(" lcar=%-7d rtry=%d\n", + pstats->lcar, pstats->rtry); + + /* MACE_XMTRC */ + pr_debug(" exdef=%-7d xmtrc=%d\n", + pstats->exdef, pstats->xmtrc); + + /* RFS1--Receive Status (RCVSTS) */ + pr_debug(" oflo=%-7d clsn=%d\n", + pstats->oflo, pstats->clsn); + pr_debug(" fram=%-7d fcs=%d\n", + pstats->fram, pstats->fcs); + + /* RFS2--Runt Packet Count (RNTPC) */ + /* RFS3--Receive Collision Count (RCVCC) */ + pr_debug(" rfs_rntpc=%-7d rfs_rcvcc=%d\n", + pstats->rfs_rntpc, pstats->rfs_rcvcc); + + /* MACE_IR */ + pr_debug(" jab=%-7d babl=%d\n", + pstats->jab, pstats->babl); + pr_debug(" cerr=%-7d rcvcco=%d\n", + pstats->cerr, pstats->rcvcco); + pr_debug(" rntpco=%-7d mpco=%d\n", + pstats->rntpco, pstats->mpco); + + /* MACE_MPC */ + pr_debug(" mpc=%d\n", pstats->mpc); + + /* MACE_RNTPC */ + pr_debug(" rntpc=%d\n", pstats->rntpc); + + /* MACE_RCVCC */ + pr_debug(" rcvcc=%d\n", pstats->rcvcc); + +} /* pr_mace_stats */ + +/* ---------------------------------------------------------------------------- +update_stats + Update statistics. We change to register window 1, so this + should be run single-threaded if the device is active. This is + expected to be a rare operation, and it's simpler for the rest + of the driver to assume that window 0 is always valid rather + than use a special window-state variable. + + oflo & uflo should _never_ occur since it would mean the Xilinx + was not able to transfer data between the MACE FIFO and the + card's SRAM fast enough. If this happens, something is + seriously wrong with the hardware. +---------------------------------------------------------------------------- */ +static void update_stats(unsigned int ioaddr, struct net_device *dev) +{ + mace_private *lp = netdev_priv(dev); + + lp->mace_stats.rcvcc += mace_read(lp, ioaddr, MACE_RCVCC); + lp->mace_stats.rntpc += mace_read(lp, ioaddr, MACE_RNTPC); + lp->mace_stats.mpc += mace_read(lp, ioaddr, MACE_MPC); + /* At this point, mace_stats is fully updated for this call. + We may now update the linux_stats. */ + + /* The MACE has no equivalent for linux_stats field which are commented + out. */ + + /* lp->linux_stats.multicast; */ + lp->linux_stats.collisions = + lp->mace_stats.rcvcco * 256 + lp->mace_stats.rcvcc; + /* Collision: The MACE may retry sending a packet 15 times + before giving up. The retry count is in XMTRC. + Does each retry constitute a collision? + If so, why doesn't the RCVCC record these collisions? */ + + /* detailed rx_errors: */ + lp->linux_stats.rx_length_errors = + lp->mace_stats.rntpco * 256 + lp->mace_stats.rntpc; + /* lp->linux_stats.rx_over_errors */ + lp->linux_stats.rx_crc_errors = lp->mace_stats.fcs; + lp->linux_stats.rx_frame_errors = lp->mace_stats.fram; + lp->linux_stats.rx_fifo_errors = lp->mace_stats.oflo; + lp->linux_stats.rx_missed_errors = + lp->mace_stats.mpco * 256 + lp->mace_stats.mpc; + + /* detailed tx_errors */ + lp->linux_stats.tx_aborted_errors = lp->mace_stats.rtry; + lp->linux_stats.tx_carrier_errors = lp->mace_stats.lcar; + /* LCAR usually results from bad cabling. */ + lp->linux_stats.tx_fifo_errors = lp->mace_stats.uflo; + lp->linux_stats.tx_heartbeat_errors = lp->mace_stats.cerr; + /* lp->linux_stats.tx_window_errors; */ +} /* update_stats */ + +/* ---------------------------------------------------------------------------- +mace_get_stats + Gathers ethernet statistics from the MACE chip. +---------------------------------------------------------------------------- */ +static struct net_device_stats *mace_get_stats(struct net_device *dev) +{ + mace_private *lp = netdev_priv(dev); + + update_stats(dev->base_addr, dev); + + pr_debug("%s: updating the statistics.\n", dev->name); + pr_linux_stats(&lp->linux_stats); + pr_mace_stats(&lp->mace_stats); + + return &lp->linux_stats; +} /* net_device_stats */ + +/* ---------------------------------------------------------------------------- +updateCRC + Modified from Am79C90 data sheet. +---------------------------------------------------------------------------- */ + +#ifdef BROKEN_MULTICAST + +static void updateCRC(int *CRC, int bit) +{ + static const int poly[]={ + 1,1,1,0, 1,1,0,1, + 1,0,1,1, 1,0,0,0, + 1,0,0,0, 0,0,1,1, + 0,0,1,0, 0,0,0,0 + }; /* CRC polynomial. poly[n] = coefficient of the x**n term of the + CRC generator polynomial. */ + + int j; + + /* shift CRC and control bit (CRC[32]) */ + for (j = 32; j > 0; j--) + CRC[j] = CRC[j-1]; + CRC[0] = 0; + + /* If bit XOR(control bit) = 1, set CRC = CRC XOR polynomial. */ + if (bit ^ CRC[32]) + for (j = 0; j < 32; j++) + CRC[j] ^= poly[j]; +} /* updateCRC */ + +/* ---------------------------------------------------------------------------- +BuildLAF + Build logical address filter. + Modified from Am79C90 data sheet. + +Input + ladrf: logical address filter (contents initialized to 0) + adr: ethernet address +---------------------------------------------------------------------------- */ +static void BuildLAF(int *ladrf, int *adr) +{ + int CRC[33]={1}; /* CRC register, 1 word/bit + extra control bit */ + + int i, byte; /* temporary array indices */ + int hashcode; /* the output object */ + + CRC[32]=0; + + for (byte = 0; byte < 6; byte++) + for (i = 0; i < 8; i++) + updateCRC(CRC, (adr[byte] >> i) & 1); + + hashcode = 0; + for (i = 0; i < 6; i++) + hashcode = (hashcode << 1) + CRC[i]; + + byte = hashcode >> 3; + ladrf[byte] |= (1 << (hashcode & 7)); + +#ifdef PCMCIA_DEBUG + if (0) + printk(KERN_DEBUG " adr =%pM\n", adr); + printk(KERN_DEBUG " hashcode = %d(decimal), ladrf[0:63] =", hashcode); + for (i = 0; i < 8; i++) + pr_cont(" %02X", ladrf[i]); + pr_cont("\n"); +#endif +} /* BuildLAF */ + +/* ---------------------------------------------------------------------------- +restore_multicast_list + Restores the multicast filter for MACE chip to the last + set_multicast_list() call. + +Input + multicast_num_addrs + multicast_ladrf[] +---------------------------------------------------------------------------- */ +static void restore_multicast_list(struct net_device *dev) +{ + mace_private *lp = netdev_priv(dev); + int num_addrs = lp->multicast_num_addrs; + int *ladrf = lp->multicast_ladrf; + unsigned int ioaddr = dev->base_addr; + int i; + + pr_debug("%s: restoring Rx mode to %d addresses.\n", + dev->name, num_addrs); + + if (num_addrs > 0) { + + pr_debug("Attempt to restore multicast list detected.\n"); + + mace_write(lp, ioaddr, MACE_IAC, MACE_IAC_ADDRCHG | MACE_IAC_LOGADDR); + /* Poll ADDRCHG bit */ + while (mace_read(lp, ioaddr, MACE_IAC) & MACE_IAC_ADDRCHG) + ; + /* Set LADRF register */ + for (i = 0; i < MACE_LADRF_LEN; i++) + mace_write(lp, ioaddr, MACE_LADRF, ladrf[i]); + + mace_write(lp, ioaddr, MACE_UTR, MACE_UTR_RCVFCSE | MACE_UTR_LOOP_EXTERNAL); + mace_write(lp, ioaddr, MACE_MACCC, MACE_MACCC_ENXMT | MACE_MACCC_ENRCV); + + } else if (num_addrs < 0) { + + /* Promiscuous mode: receive all packets */ + mace_write(lp, ioaddr, MACE_UTR, MACE_UTR_LOOP_EXTERNAL); + mace_write(lp, ioaddr, MACE_MACCC, + MACE_MACCC_PROM | MACE_MACCC_ENXMT | MACE_MACCC_ENRCV + ); + + } else { + + /* Normal mode */ + mace_write(lp, ioaddr, MACE_UTR, MACE_UTR_LOOP_EXTERNAL); + mace_write(lp, ioaddr, MACE_MACCC, MACE_MACCC_ENXMT | MACE_MACCC_ENRCV); + + } +} /* restore_multicast_list */ + +/* ---------------------------------------------------------------------------- +set_multicast_list + Set or clear the multicast filter for this adaptor. + +Input + num_addrs == -1 Promiscuous mode, receive all packets + num_addrs == 0 Normal mode, clear multicast list + num_addrs > 0 Multicast mode, receive normal and MC packets, and do + best-effort filtering. +Output + multicast_num_addrs + multicast_ladrf[] +---------------------------------------------------------------------------- */ + +static void set_multicast_list(struct net_device *dev) +{ + mace_private *lp = netdev_priv(dev); + int adr[ETHER_ADDR_LEN] = {0}; /* Ethernet address */ + struct netdev_hw_addr *ha; + +#ifdef PCMCIA_DEBUG + { + static int old; + if (netdev_mc_count(dev) != old) { + old = netdev_mc_count(dev); + pr_debug("%s: setting Rx mode to %d addresses.\n", + dev->name, old); + } + } +#endif + + /* Set multicast_num_addrs. */ + lp->multicast_num_addrs = netdev_mc_count(dev); + + /* Set multicast_ladrf. */ + if (num_addrs > 0) { + /* Calculate multicast logical address filter */ + memset(lp->multicast_ladrf, 0, MACE_LADRF_LEN); + netdev_for_each_mc_addr(ha, dev) { + memcpy(adr, ha->addr, ETHER_ADDR_LEN); + BuildLAF(lp->multicast_ladrf, adr); + } + } + + restore_multicast_list(dev); + +} /* set_multicast_list */ + +#endif /* BROKEN_MULTICAST */ + +static void restore_multicast_list(struct net_device *dev) +{ + unsigned int ioaddr = dev->base_addr; + mace_private *lp = netdev_priv(dev); + + pr_debug("%s: restoring Rx mode to %d addresses.\n", dev->name, + lp->multicast_num_addrs); + + if (dev->flags & IFF_PROMISC) { + /* Promiscuous mode: receive all packets */ + mace_write(lp,ioaddr, MACE_UTR, MACE_UTR_LOOP_EXTERNAL); + mace_write(lp, ioaddr, MACE_MACCC, + MACE_MACCC_PROM | MACE_MACCC_ENXMT | MACE_MACCC_ENRCV + ); + } else { + /* Normal mode */ + mace_write(lp, ioaddr, MACE_UTR, MACE_UTR_LOOP_EXTERNAL); + mace_write(lp, ioaddr, MACE_MACCC, MACE_MACCC_ENXMT | MACE_MACCC_ENRCV); + } +} /* restore_multicast_list */ + +static void set_multicast_list(struct net_device *dev) +{ + mace_private *lp = netdev_priv(dev); + +#ifdef PCMCIA_DEBUG + { + static int old; + if (netdev_mc_count(dev) != old) { + old = netdev_mc_count(dev); + pr_debug("%s: setting Rx mode to %d addresses.\n", + dev->name, old); + } + } +#endif + + lp->multicast_num_addrs = netdev_mc_count(dev); + restore_multicast_list(dev); + +} /* set_multicast_list */ + +static const struct pcmcia_device_id nmclan_ids[] = { + PCMCIA_DEVICE_PROD_ID12("New Media Corporation", "Ethernet", 0x085a850b, 0x00b2e941), + PCMCIA_DEVICE_PROD_ID12("Portable Add-ons", "Ethernet+", 0xebf1d60, 0xad673aaf), + PCMCIA_DEVICE_NULL, +}; +MODULE_DEVICE_TABLE(pcmcia, nmclan_ids); + +static struct pcmcia_driver nmclan_cs_driver = { + .owner = THIS_MODULE, + .name = "nmclan_cs", + .probe = nmclan_probe, + .remove = nmclan_detach, + .id_table = nmclan_ids, + .suspend = nmclan_suspend, + .resume = nmclan_resume, +}; + +static int __init init_nmclan_cs(void) +{ + return pcmcia_register_driver(&nmclan_cs_driver); +} + +static void __exit exit_nmclan_cs(void) +{ + pcmcia_unregister_driver(&nmclan_cs_driver); +} + +module_init(init_nmclan_cs); +module_exit(exit_nmclan_cs); |