3 files changed, 8 insertions, 12 deletions
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 21f250b8cbb0..de6a6208e344 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -847,7 +847,7 @@ config SOC_CAMERA
 
 config SOC_CAMERA_MT9M001
 	tristate "mt9m001 support"
-	depends on SOC_CAMERA && GENERIC_GPIO
+	depends on SOC_CAMERA
 	select GPIO_PCA953X if MT9M001_PCA9536_SWITCH
 	help
 	  This driver supports MT9M001 cameras from Micron, monochrome
@@ -855,21 +855,21 @@ config SOC_CAMERA_MT9M001
 
 config MT9M001_PCA9536_SWITCH
 	bool "pca9536 datawidth switch for mt9m001"
-	depends on SOC_CAMERA_MT9M001
+	depends on SOC_CAMERA_MT9M001 && GENERIC_GPIO
 	help
 	  Select this if your MT9M001 camera uses a PCA9536 I2C GPIO
 	  extender to switch between 8 and 10 bit datawidth modes
 
 config SOC_CAMERA_MT9V022
 	tristate "mt9v022 support"
-	depends on SOC_CAMERA && GENERIC_GPIO
+	depends on SOC_CAMERA
 	select GPIO_PCA953X if MT9V022_PCA9536_SWITCH
 	help
 	  This driver supports MT9V022 cameras from Micron
 
 config MT9V022_PCA9536_SWITCH
 	bool "pca9536 datawidth switch for mt9v022"
-	depends on SOC_CAMERA_MT9V022
+	depends on SOC_CAMERA_MT9V022 && GENERIC_GPIO
 	help
 	  Select this if your MT9V022 camera uses a PCA9536 I2C GPIO
 	  extender to switch between 8 and 10 bit datawidth modes
diff --git a/drivers/media/video/mt9m001.c b/drivers/media/video/mt9m001.c
index b65ff7745b8d..e3afc82050af 100644
--- a/drivers/media/video/mt9m001.c
+++ b/drivers/media/video/mt9m001.c
@@ -17,7 +17,9 @@
 #include <media/v4l2-chip-ident.h>
 #include <media/soc_camera.h>
 
+#ifdef CONFIG_MT9M001_PCA9536_SWITCH
 #include <asm/gpio.h>
+#endif
 
 /* mt9m001 i2c address 0x5d
  * The platform has to define i2c_board_info
@@ -223,10 +225,6 @@ static int mt9m001_set_capture_format(struct soc_camera_device *icd,
 	if ((mt9m001->datawidth != 10 && (width_flag == IS_DATAWIDTH_10)) ||
 	    (mt9m001->datawidth != 9  && (width_flag == IS_DATAWIDTH_9)) ||
 	    (mt9m001->datawidth != 8  && (width_flag == IS_DATAWIDTH_8))) {
-		/* data width switch requested */
-		if (!gpio_is_valid(mt9m001->switch_gpio))
-			return -EINVAL;
-
 		/* Well, we actually only can do 10 or 8 bits... */
 		if (width_flag == IS_DATAWIDTH_9)
 			return -EINVAL;
diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c
index 5fbeaa305f35..468333946d57 100644
--- a/drivers/media/video/mt9v022.c
+++ b/drivers/media/video/mt9v022.c
@@ -18,7 +18,9 @@
 #include <media/v4l2-chip-ident.h>
 #include <media/soc_camera.h>
 
+#ifdef CONFIG_MT9M001_PCA9536_SWITCH
 #include <asm/gpio.h>
+#endif
 
 /* mt9v022 i2c address 0x48, 0x4c, 0x58, 0x5c
  * The platform has to define i2c_board_info
@@ -302,10 +304,6 @@ static int mt9v022_set_capture_format(struct soc_camera_device *icd,
 	if ((mt9v022->datawidth != 10 && (width_flag == IS_DATAWIDTH_10)) ||
 	    (mt9v022->datawidth != 9  && (width_flag == IS_DATAWIDTH_9)) ||
 	    (mt9v022->datawidth != 8  && (width_flag == IS_DATAWIDTH_8))) {
-		/* data width switch requested */
-		if (!gpio_is_valid(mt9v022->switch_gpio))
-			return -EINVAL;
-
 		/* Well, we actually only can do 10 or 8 bits... */
 		if (width_flag == IS_DATAWIDTH_9)
 			return -EINVAL;