MIPS: Netlogic: Move serial ports to device tree

Add the serial ports to the device tree and remove the platform
code for adding them.

Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com>
Patchwork: http://patchwork.linux-mips.org/patch/4098/
Signed-off-by: John Crispin <blogic@openwrt.org>

1 files changed, 0 insertions, 108 deletions

diff --git a/arch/mips/netlogic/xlp/platform.c b/arch/mips/netlogic/xlp/platform.c
deleted file mode 100644
index 2c510d585447..000000000000
--- a/arch/mips/netlogic/xlp/platform.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
- * reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the NetLogic
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <linux/serial_8250.h>
-#include <linux/pci.h>
-#include <linux/serial_reg.h>
-#include <linux/spinlock.h>
-
-#include <asm/time.h>
-#include <asm/addrspace.h>
-#include <asm/netlogic/haldefs.h>
-#include <asm/netlogic/xlp-hal/iomap.h>
-#include <asm/netlogic/xlp-hal/xlp.h>
-#include <asm/netlogic/xlp-hal/pic.h>
-#include <asm/netlogic/xlp-hal/uart.h>
-
-static unsigned int nlm_xlp_uart_in(struct uart_port *p, int offset)
-{
-	return nlm_read_reg(p->iobase, offset);
-}
-
-static void nlm_xlp_uart_out(struct uart_port *p, int offset, int value)
-{
-	nlm_write_reg(p->iobase, offset, value);
-}
-
-#define PORT(_irq)					\
-	{						\
-		.irq		= _irq,			\
-		.regshift	= 2,			\
-		.iotype		= UPIO_MEM32,		\
-		.flags		= (UPF_SKIP_TEST|UPF_FIXED_TYPE|\
-					UPF_BOOT_AUTOCONF),	\
-		.uartclk	= XLP_IO_CLK,		\
-		.type		= PORT_16550A,		\
-		.serial_in	= nlm_xlp_uart_in,	\
-		.serial_out	= nlm_xlp_uart_out,	\
-	}
-
-static struct plat_serial8250_port xlp_uart_data[] = {
-	PORT(PIC_UART_0_IRQ),
-	PORT(PIC_UART_1_IRQ),
-	{},
-};
-
-static struct platform_device uart_device = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev = {
-		.platform_data = xlp_uart_data,
-	},
-};
-
-static int __init nlm_platform_uart_init(void)
-{
-	unsigned long mmio;
-
-	mmio = (unsigned long)nlm_get_uart_regbase(0, 0);
-	xlp_uart_data[0].iobase = mmio;
-	xlp_uart_data[0].membase = (void __iomem *)mmio;
-	xlp_uart_data[0].mapbase = mmio;
-
-	mmio = (unsigned long)nlm_get_uart_regbase(0, 1);
-	xlp_uart_data[1].iobase = mmio;
-	xlp_uart_data[1].membase = (void __iomem *)mmio;
-	xlp_uart_data[1].mapbase = mmio;
-
-	return platform_device_register(&uart_device);
-}
-
-arch_initcall(nlm_platform_uart_init);