[MIPS] MT: Improved multithreading support.

    
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

3 files changed, 138 insertions, 2 deletions

diff --git a/arch/mips/mips-boards/malta/Makefile b/arch/mips/mips-boards/malta/Makefile
index fd4c143c0e2f..77ee5c6d33c1 100644
--- a/arch/mips/mips-boards/malta/Makefile
+++ b/arch/mips/mips-boards/malta/Makefile
@@ -20,3 +20,4 @@
 #
 
 obj-y := malta_int.o malta_setup.o
+obj-$(CONFIG_SMP) += malta_smp.o
diff --git a/arch/mips/mips-boards/malta/malta_int.c b/arch/mips/mips-boards/malta/malta_int.c
index 1da8c18b9c8e..64db07d4dbe5 100644
--- a/arch/mips/mips-boards/malta/malta_int.c
+++ b/arch/mips/mips-boards/malta/malta_int.c
@@ -118,8 +118,9 @@ static void malta_hw0_irqdispatch(struct pt_regs *regs)
 	int irq;
 
 	irq = get_int();
-	if (irq < 0)
+	if (irq < 0) {
 		return;  /* interrupt has already been cleared */
+	}
 
 	do_IRQ(MALTA_INT_BASE+irq, regs);
 }
@@ -324,9 +325,15 @@ void __init arch_init_irq(void)
 	else if (cpu_has_vint) {
 		set_vi_handler (MIPSCPU_INT_I8259A, malta_hw0_irqdispatch);
 		set_vi_handler (MIPSCPU_INT_COREHI, corehi_irqdispatch);
-
+#ifdef CONFIG_MIPS_MT_SMTC
+		setup_irq_smtc (MIPSCPU_INT_BASE+MIPSCPU_INT_I8259A, &i8259irq,
+			(0x100 << MIPSCPU_INT_I8259A));
+		setup_irq_smtc (MIPSCPU_INT_BASE+MIPSCPU_INT_COREHI,
+			&corehi_irqaction, (0x100 << MIPSCPU_INT_COREHI));
+#else /* Not SMTC */
 		setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_I8259A, &i8259irq);
 		setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_COREHI, &corehi_irqaction);
+#endif /* CONFIG_MIPS_MT_SMTC */
 	}
 	else {
 		setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_I8259A, &i8259irq);
diff --git a/arch/mips/mips-boards/malta/malta_smp.c b/arch/mips/mips-boards/malta/malta_smp.c
new file mode 100644
index 000000000000..6c6c8eeedbce
--- /dev/null
+++ b/arch/mips/mips-boards/malta/malta_smp.c
@@ -0,0 +1,128 @@
+/*
+ * Malta Platform-specific hooks for SMP operation
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/cpumask.h>
+#include <linux/interrupt.h>
+
+#include <asm/atomic.h>
+#include <asm/cpu.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/hardirq.h>
+#include <asm/mmu_context.h>
+#include <asm/smp.h>
+#ifdef CONFIG_MIPS_MT_SMTC
+#include <asm/smtc_ipi.h>
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+/* VPE/SMP Prototype implements platform interfaces directly */
+#if !defined(CONFIG_MIPS_MT_SMP)
+
+/*
+ * Cause the specified action to be performed on a targeted "CPU"
+ */
+
+void core_send_ipi(int cpu, unsigned int action)
+{
+/* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */
+#ifdef CONFIG_MIPS_MT_SMTC
+	smtc_send_ipi(cpu, LINUX_SMP_IPI, action);
+#endif /* CONFIG_MIPS_MT_SMTC */
+}
+
+/*
+ * Detect available CPUs/VPEs/TCs and populate phys_cpu_present_map
+ */
+
+void __init prom_build_cpu_map(void)
+{
+	int nextslot;
+
+	/*
+	 * As of November, 2004, MIPSsim only simulates one core
+	 * at a time.  However, that core may be a MIPS MT core
+	 * with multiple virtual processors and thread contexts.
+	 */
+
+	if (read_c0_config3() & (1<<2)) {
+		nextslot = mipsmt_build_cpu_map(1);
+	}
+}
+
+/*
+ * Platform "CPU" startup hook
+ */
+
+void prom_boot_secondary(int cpu, struct task_struct *idle)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+	smtc_boot_secondary(cpu, idle);
+#endif /* CONFIG_MIPS_MT_SMTC */
+}
+
+/*
+ * Post-config but pre-boot cleanup entry point
+ */
+
+void prom_init_secondary(void)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+        void smtc_init_secondary(void);
+	int myvpe;
+
+	/* Don't enable Malta I/O interrupts (IP2) for secondary VPEs */
+	myvpe = read_c0_tcbind() & TCBIND_CURVPE;
+	if (myvpe != 0) {
+		/* Ideally, this should be done only once per VPE, but... */
+		clear_c0_status(STATUSF_IP2);
+		set_c0_status(STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP3
+				| STATUSF_IP4 | STATUSF_IP5 | STATUSF_IP6
+				| STATUSF_IP7);
+	}
+
+        smtc_init_secondary();
+#endif /* CONFIG_MIPS_MT_SMTC */
+}
+
+/*
+ * Platform SMP pre-initialization
+ *
+ * As noted above, we can assume a single CPU for now
+ * but it may be multithreaded.
+ */
+
+void plat_smp_setup(void)
+{
+	if (read_c0_config3() & (1<<2))
+		mipsmt_build_cpu_map(0);
+}
+
+void __init plat_prepare_cpus(unsigned int max_cpus)
+{
+	if (read_c0_config3() & (1<<2))
+		mipsmt_prepare_cpus();
+}
+
+/*
+ * SMP initialization finalization entry point
+ */
+
+void prom_smp_finish(void)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+	smtc_smp_finish();
+#endif /* CONFIG_MIPS_MT_SMTC */
+}
+
+/*
+ * Hook for after all CPUs are online
+ */
+
+void prom_cpus_done(void)
+{
+}
+
+#endif /* CONFIG_MIPS32R2_MT_SMP */