path: root/Documentation/gpu/drm-kms.rst

=========================
Kernel Mode Setting (KMS)
=========================

Drivers must initialize the mode setting core by calling
:c:func:`drm_mode_config_init()` on the DRM device. The function
initializes the :c:type:`struct drm_device <drm_device>`
mode_config field and never fails. Once done, mode configuration must
be setup by initializing the following fields.

-  int min_width, min_height; int max_width, max_height;
   Minimum and maximum width and height of the frame buffers in pixel
   units.

-  struct drm_mode_config_funcs \*funcs;
   Mode setting functions.

Overview
========

.. kernel-render:: DOT
   :alt: KMS Display Pipeline
   :caption: KMS Display Pipeline Overview

   digraph "KMS" {
      node [shape=box]

      subgraph cluster_static {
          style=dashed
          label="Static Objects"

          node [bgcolor=grey style=filled]
          "drm_plane A" -> "drm_crtc"
          "drm_plane B" -> "drm_crtc"
          "drm_crtc" -> "drm_encoder A"
          "drm_crtc" -> "drm_encoder B"
      }

      subgraph cluster_user_created {
          style=dashed
          label="Userspace-Created"

          node [shape=oval]
          "drm_framebuffer 1" -> "drm_plane A"
          "drm_framebuffer 2" -> "drm_plane B"
      }

      subgraph cluster_connector {
          style=dashed
          label="Hotpluggable"

          "drm_encoder A" -> "drm_connector A"
          "drm_encoder B" -> "drm_connector B"
      }
   }

The basic object structure KMS presents to userspace is fairly simple.
Framebuffers (represented by :c:type:`struct drm_framebuffer <drm_framebuffer>`,
see `Frame Buffer Abstraction`_) feed into planes. One or more (or even no)
planes feed their pixel data into a CRTC (represented by :c:type:`struct
drm_crtc <drm_crtc>`, see `CRTC Abstraction`_) for blending. The precise
blending step is explained in more detail in `Plane Composition Properties`_ and
related chapters.

For the output routing the first step is encoders (represented by
:c:type:`struct drm_encoder <drm_encoder>`, see `Encoder Abstraction`_). Those
are really just internal artifacts of the helper libraries used to implement KMS
drivers. Besides that they make it unecessarily more complicated for userspace
to figure out which connections between a CRTC and a connector are possible, and
what kind of cloning is supported, they serve no purpose in the userspace API.
Unfortunately encoders have been exposed to userspace, hence can't remove them
at this point.  Futhermore the exposed restrictions are often wrongly set by
drivers, and in many cases not powerful enough to express the real restrictions.
A CRTC can be connected to multiple encoders, and for an active CRTC there must
be at least one encoder.

The final, and real, endpoint in the display chain is the connector (represented
by :c:type:`struct drm_connector <drm_connector>`, see `Connector
Abstraction`_). Connectors can have different possible encoders, but the kernel
driver selects which encoder to use for each connector. The use case is DVI,
which could switch between an analog and a digital encoder. Encoders can also
drive multiple different connectors. There is exactly one active connector for
every active encoder.

Internally the output pipeline is a bit more complex and matches today's
hardware more closely:

.. kernel-render:: DOT
   :alt: KMS Output Pipeline
   :caption: KMS Output Pipeline

   digraph "Output Pipeline" {
      node [shape=box]

      subgraph {
          "drm_crtc" [bgcolor=grey style=filled]
      }

      subgraph cluster_internal {
          style=dashed
          label="Internal Pipeline"
          {
              node [bgcolor=grey style=filled]
              "drm_encoder A";
              "drm_encoder B";
              "drm_encoder C";
          }

          {
              node [bgcolor=grey style=filled]
              "drm_encoder B" -> "drm_bridge B"
              "drm_encoder C" -> "drm_bridge C1"
              "drm_bridge C1" -> "drm_bridge C2";
          }
      }

      "drm_crtc" -> "drm_encoder A"
      "drm_crtc" -> "drm_encoder B"
      "drm_crtc" -> "drm_encoder C"


      subgraph cluster_output {
          style=dashed
          label="Outputs"

          "drm_encoder A" -> "drm_connector A";
          "drm_bridge B" -> "drm_connector B";
          "drm_bridge C2" -> "drm_connector C";

          "drm_panel"
      }
   }

Internally two additional helper objects come into play. First, to be able to
share code for encoders (sometimes on the same SoC, sometimes off-chip) one or
more :ref:`drm_bridges` (represented by :c:type:`struct drm_bridge
<drm_bridge>`) can be linked to an encoder. This link is static and cannot be
changed, which means the cross-bar (if there is any) needs to be mapped between
the CRTC and any encoders. Often for drivers with bridges there's no code left
at the encoder level. Atomic drivers can leave out all the encoder callbacks to
essentially only leave a dummy routing object behind, which is needed for
backwards compatibility since encoders are exposed to userspace.

The second object is for panels, represented by :c:type:`struct drm_panel
<drm_panel>`, see :ref:`drm_panel_helper`. Panels do not have a fixed binding
point, but are generally linked to the driver private structure that embeds
:c:type:`struct drm_connector <drm_connector>`.

Note that currently the bridge chaining and interactions with connectors and
panels are still in-flux and not really fully sorted out yet.

KMS Core Structures and Functions
=================================

.. kernel-doc:: drivers/gpu/drm/drm_mode_config.c
   :export:

.. kernel-doc:: include/drm/drm_mode_config.h
   :internal:

Modeset Base Object Abstraction
===============================

.. kernel-doc:: include/drm/drm_mode_object.h
   :internal:

.. kernel-doc:: drivers/gpu/drm/drm_mode_object.c
   :export:

Atomic Mode Setting Function Reference
======================================

.. kernel-doc:: drivers/gpu/drm/drm_atomic.c
   :export:

.. kernel-doc:: include/drm/drm_atomic.h
   :internal:

CRTC Abstraction
================

.. kernel-doc:: drivers/gpu/drm/drm_crtc.c
   :doc: overview

CRTC Functions Reference
--------------------------------

.. kernel-doc:: include/drm/drm_crtc.h
   :internal:

.. kernel-doc:: drivers/gpu/drm/drm_crtc.c
   :export:

Frame Buffer Abstraction
========================

.. kernel-doc:: drivers/gpu/drm/drm_framebuffer.c
   :doc: overview

Frame Buffer Functions Reference
--------------------------------

.. kernel-doc:: drivers/gpu/drm/drm_framebuffer.c
   :export:

.. kernel-doc:: include/drm/drm_framebuffer.h
   :internal:

DRM Format Handling
===================

.. kernel-doc:: include/drm/drm_fourcc.h
   :internal:

.. kernel-doc:: drivers/gpu/drm/drm_fourcc.c
   :export:

Dumb Buffer Objects
===================

.. kernel-doc:: drivers/gpu/drm/drm_dumb_buffers.c
   :doc: overview

Plane Abstraction
=================

.. kernel-doc:: drivers/gpu/drm/drm_plane.c
   :doc: overview

Plane Functions Reference
-------------------------

.. kernel-doc:: include/drm/drm_plane.h
   :internal:

.. kernel-doc:: drivers/gpu/drm/drm_plane.c
   :export:

Display Modes Function Reference
================================

.. kernel-doc:: include/drm/drm_modes.h
   :internal:

.. kernel-doc:: drivers/gpu/drm/drm_modes.c
   :export:

Connector Abstraction
=====================

.. kernel-doc:: drivers/gpu/drm/drm_connector.c
   :doc: overview

Connector Functions Reference
-----------------------------

.. kernel-doc:: include/drm/drm_connector.h
   :internal:

.. kernel-doc:: drivers/gpu/drm/drm_connector.c
   :export:

Encoder Abstraction
===================

.. kernel-doc:: drivers/gpu/drm/drm_encoder.c
   :doc: overview

Encoder Functions Reference
---------------------------

.. kernel-doc:: include/drm/drm_encoder.h
   :internal:

.. kernel-doc:: drivers/gpu/drm/drm_encoder.c
   :export:

KMS Initialization and Cleanup
==============================

A KMS device is abstracted and exposed as a set of planes, CRTCs,
encoders and connectors. KMS drivers must thus create and initialize all
those objects at load time after initializing mode setting.

CRTCs (:c:type:`struct drm_crtc <drm_crtc>`)
--------------------------------------------

A CRTC is an abstraction representing a part of the chip that contains a
pointer to a scanout buffer. Therefore, the number of CRTCs available
determines how many independent scanout buffers can be active at any
given time. The CRTC structure contains several fields to support this:
a pointer to some video memory (abstracted as a frame buffer object), a
display mode, and an (x, y) offset into the video memory to support
panning or configurations where one piece of video memory spans multiple
CRTCs.

CRTC Initialization
~~~~~~~~~~~~~~~~~~~

A KMS device must create and register at least one struct
:c:type:`struct drm_crtc <drm_crtc>` instance. The instance is
allocated and zeroed by the driver, possibly as part of a larger
structure, and registered with a call to :c:func:`drm_crtc_init()`
with a pointer to CRTC functions.


Cleanup
-------

The DRM core manages its objects' lifetime. When an object is not needed
anymore the core calls its destroy function, which must clean up and
free every resource allocated for the object. Every
:c:func:`drm_\*_init()` call must be matched with a corresponding
:c:func:`drm_\*_cleanup()` call to cleanup CRTCs
(:c:func:`drm_crtc_cleanup()`), planes
(:c:func:`drm_plane_cleanup()`), encoders
(:c:func:`drm_encoder_cleanup()`) and connectors
(:c:func:`drm_connector_cleanup()`). Furthermore, connectors that
have been added to sysfs must be removed by a call to
:c:func:`drm_connector_unregister()` before calling
:c:func:`drm_connector_cleanup()`.

Connectors state change detection must be cleanup up with a call to
:c:func:`drm_kms_helper_poll_fini()`.

Output discovery and initialization example
-------------------------------------------

.. code-block:: c

    void intel_crt_init(struct drm_device *dev)
    {
        struct drm_connector *connector;
        struct intel_output *intel_output;

        intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL);
        if (!intel_output)
            return;

        connector = &intel_output->base;
        drm_connector_init(dev, &intel_output->base,
                   &intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);

        drm_encoder_init(dev, &intel_output->enc, &intel_crt_enc_funcs,
                 DRM_MODE_ENCODER_DAC);

        drm_mode_connector_attach_encoder(&intel_output->base,
                          &intel_output->enc);

        /* Set up the DDC bus. */
        intel_output->ddc_bus = intel_i2c_create(dev, GPIOA, "CRTDDC_A");
        if (!intel_output->ddc_bus) {
            dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "
                   "failed.\n");
            return;
        }

        intel_output->type = INTEL_OUTPUT_ANALOG;
        connector->interlace_allowed = 0;
        connector->doublescan_allowed = 0;

        drm_encoder_helper_add(&intel_output->enc, &intel_crt_helper_funcs);
        drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);

        drm_connector_register(connector);
    }

In the example above (taken from the i915 driver), a CRTC, connector and
encoder combination is created. A device-specific i2c bus is also
created for fetching EDID data and performing monitor detection. Once
the process is complete, the new connector is registered with sysfs to
make its properties available to applications.

KMS Locking
===========

.. kernel-doc:: drivers/gpu/drm/drm_modeset_lock.c
   :doc: kms locking

.. kernel-doc:: include/drm/drm_modeset_lock.h
   :internal:

.. kernel-doc:: drivers/gpu/drm/drm_modeset_lock.c
   :export:

KMS Properties
==============

Property Types and Blob Property Support
----------------------------------------

.. kernel-doc:: drivers/gpu/drm/drm_property.c
   :doc: overview

.. kernel-doc:: include/drm/drm_property.h
   :internal:

.. kernel-doc:: drivers/gpu/drm/drm_property.c
   :export:

Standard Connector Properties
-----------------------------

.. kernel-doc:: drivers/gpu/drm/drm_connector.c
   :doc: standard connector properties

Plane Composition Properties
----------------------------

.. kernel-doc:: drivers/gpu/drm/drm_blend.c
   :doc: overview

.. kernel-doc:: drivers/gpu/drm/drm_blend.c
   :export:

Color Management Properties
---------------------------

.. kernel-doc:: drivers/gpu/drm/drm_color_mgmt.c
   :doc: overview

.. kernel-doc:: include/drm/drm_color_mgmt.h
   :internal:

.. kernel-doc:: drivers/gpu/drm/drm_color_mgmt.c
   :export:

Tile Group Property
-------------------

.. kernel-doc:: drivers/gpu/drm/drm_connector.c
   :doc: Tile group

Explicit Fencing Properties
---------------------------

.. kernel-doc:: drivers/gpu/drm/drm_atomic.c
   :doc: explicit fencing properties

Existing KMS Properties
-----------------------

The following table gives description of drm properties exposed by
various modules/drivers.

.. csv-table::
   :header-rows: 1
   :file: kms-properties.csv

Vertical Blanking
=================

Vertical blanking plays a major role in graphics rendering. To achieve
tear-free display, users must synchronize page flips and/or rendering to
vertical blanking. The DRM API offers ioctls to perform page flips
synchronized to vertical blanking and wait for vertical blanking.

The DRM core handles most of the vertical blanking management logic,
which involves filtering out spurious interrupts, keeping race-free
blanking counters, coping with counter wrap-around and resets and
keeping use counts. It relies on the driver to generate vertical
blanking interrupts and optionally provide a hardware vertical blanking
counter. Drivers must implement the following operations.

-  int (\*enable_vblank) (struct drm_device \*dev, int crtc); void
   (\*disable_vblank) (struct drm_device \*dev, int crtc);
   Enable or disable vertical blanking interrupts for the given CRTC.

-  u32 (\*get_vblank_counter) (struct drm_device \*dev, int crtc);
   Retrieve the value of the vertical blanking counter for the given
   CRTC. If the hardware maintains a vertical blanking counter its value
   should be returned. Otherwise drivers can use the
   :c:func:`drm_vblank_count()` helper function to handle this
   operation.

Drivers must initialize the vertical blanking handling core with a call
to :c:func:`drm_vblank_init()` in their load operation.

Vertical blanking interrupts can be enabled by the DRM core or by
drivers themselves (for instance to handle page flipping operations).
The DRM core maintains a vertical blanking use count to ensure that the
interrupts are not disabled while a user still needs them. To increment
the use count, drivers call :c:func:`drm_vblank_get()`. Upon
return vertical blanking interrupts are guaranteed to be enabled.

To decrement the use count drivers call
:c:func:`drm_vblank_put()`. Only when the use count drops to zero
will the DRM core disable the vertical blanking interrupts after a delay
by scheduling a timer. The delay is accessible through the
vblankoffdelay module parameter or the ``drm_vblank_offdelay`` global
variable and expressed in milliseconds. Its default value is 5000 ms.
Zero means never disable, and a negative value means disable
immediately. Drivers may override the behaviour by setting the
:c:type:`struct drm_device <drm_device>`
vblank_disable_immediate flag, which when set causes vblank interrupts
to be disabled immediately regardless of the drm_vblank_offdelay
value. The flag should only be set if there's a properly working
hardware vblank counter present.

When a vertical blanking interrupt occurs drivers only need to call the
:c:func:`drm_handle_vblank()` function to account for the
interrupt.

Resources allocated by :c:func:`drm_vblank_init()` must be freed
with a call to :c:func:`drm_vblank_cleanup()` in the driver unload
operation handler.

Vertical Blanking and Interrupt Handling Functions Reference
------------------------------------------------------------

.. kernel-doc:: drivers/gpu/drm/drm_irq.c
   :export:

.. kernel-doc:: include/drm/drm_irq.h
   :internal: