diff options
Diffstat (limited to 'drivers/power')
| -rw-r--r-- | drivers/power/Kconfig | 6 | ||||
| -rw-r--r-- | drivers/power/Makefile | 1 | ||||
| -rw-r--r-- | drivers/power/s3c_adc_battery.c | 431 |
3 files changed, 438 insertions, 0 deletions
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 6eae8211197f..d1d3c7006eac 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -136,6 +136,12 @@ config BATTERY_Z2 help Say Y to include support for the battery on the Zipit Z2. +config BATTERY_S3C_ADC + tristate "Battery driver for Samsung ADC based monitoring" + depends on S3C_ADC + help + Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery + config CHARGER_PCF50633 tristate "NXP PCF50633 MBC" depends on MFD_PCF50633 diff --git a/drivers/power/Makefile b/drivers/power/Makefile index 2b9a81d41b4d..705675ae9f7c 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -33,5 +33,6 @@ obj-$(CONFIG_BATTERY_BQ27x00) += bq27x00_battery.o obj-$(CONFIG_BATTERY_DA9030) += da9030_battery.o obj-$(CONFIG_BATTERY_MAX17040) += max17040_battery.o obj-$(CONFIG_BATTERY_Z2) += z2_battery.o +obj-$(CONFIG_BATTERY_S3C_ADC) += s3c_adc_battery.o obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o obj-$(CONFIG_BATTERY_INTEL_MID) += intel_mid_battery.o diff --git a/drivers/power/s3c_adc_battery.c b/drivers/power/s3c_adc_battery.c new file mode 100644 index 000000000000..fe16b482e912 --- /dev/null +++ b/drivers/power/s3c_adc_battery.c @@ -0,0 +1,431 @@ +/* + * iPAQ h1930/h1940/rx1950 battery controler driver + * Copyright (c) Vasily Khoruzhick + * Based on h1940_battery.c by Arnaud Patard + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + * + */ + +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/leds.h> +#include <linux/gpio.h> +#include <linux/err.h> +#include <linux/timer.h> +#include <linux/jiffies.h> +#include <linux/s3c_adc_battery.h> +#include <linux/errno.h> +#include <linux/init.h> + +#include <plat/adc.h> + +#define BAT_POLL_INTERVAL 10000 /* ms */ +#define JITTER_DELAY 500 /* ms */ + +struct s3c_adc_bat { + struct power_supply psy; + struct s3c_adc_client *client; + struct s3c_adc_bat_pdata *pdata; + int volt_value; + int cur_value; + unsigned int timestamp; + int level; + int status; + int cable_plugged:1; +}; + +static struct delayed_work bat_work; + +static void s3c_adc_bat_ext_power_changed(struct power_supply *psy) +{ + schedule_delayed_work(&bat_work, + msecs_to_jiffies(JITTER_DELAY)); +} + +static enum power_supply_property s3c_adc_backup_bat_props[] = { + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_VOLTAGE_MIN, + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, +}; + +static int s3c_adc_backup_bat_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct s3c_adc_bat *bat = container_of(psy, struct s3c_adc_bat, psy); + + if (!bat) { + dev_err(psy->dev, "%s: no battery infos ?!\n", __func__); + return -EINVAL; + } + + if (bat->volt_value < 0 || + jiffies_to_msecs(jiffies - bat->timestamp) > + BAT_POLL_INTERVAL) { + bat->volt_value = s3c_adc_read(bat->client, + bat->pdata->backup_volt_channel); + bat->volt_value *= bat->pdata->backup_volt_mult; + bat->timestamp = jiffies; + } + + switch (psp) { + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + val->intval = bat->volt_value; + return 0; + case POWER_SUPPLY_PROP_VOLTAGE_MIN: + val->intval = bat->pdata->backup_volt_min; + return 0; + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: + val->intval = bat->pdata->backup_volt_max; + return 0; + default: + return -EINVAL; + } +} + +static struct s3c_adc_bat backup_bat = { + .psy = { + .name = "backup-battery", + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = s3c_adc_backup_bat_props, + .num_properties = ARRAY_SIZE(s3c_adc_backup_bat_props), + .get_property = s3c_adc_backup_bat_get_property, + .use_for_apm = 1, + }, +}; + +static enum power_supply_property s3c_adc_main_bat_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, + POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN, + POWER_SUPPLY_PROP_CHARGE_NOW, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, +}; + +static int calc_full_volt(int volt_val, int cur_val, int impedance) +{ + return volt_val + cur_val * impedance / 1000; +} + +static int s3c_adc_bat_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct s3c_adc_bat *bat = container_of(psy, struct s3c_adc_bat, psy); + + int new_level; + int full_volt; + const struct s3c_adc_bat_thresh *lut = bat->pdata->lut_noac; + unsigned int lut_size = bat->pdata->lut_noac_cnt; + + if (!bat) { + dev_err(psy->dev, "no battery infos ?!\n"); + return -EINVAL; + } + + if (bat->volt_value < 0 || bat->cur_value < 0 || + jiffies_to_msecs(jiffies - bat->timestamp) > + BAT_POLL_INTERVAL) { + bat->volt_value = s3c_adc_read(bat->client, + bat->pdata->volt_channel) * bat->pdata->volt_mult; + bat->cur_value = s3c_adc_read(bat->client, + bat->pdata->current_channel) * bat->pdata->current_mult; + bat->timestamp = jiffies; + } + + if (bat->cable_plugged && + ((bat->pdata->gpio_charge_finished < 0) || + !gpio_get_value(bat->pdata->gpio_charge_finished))) { + lut = bat->pdata->lut_acin; + lut_size = bat->pdata->lut_acin_cnt; + } + + new_level = 100000; + full_volt = calc_full_volt((bat->volt_value / 1000), + (bat->cur_value / 1000), bat->pdata->internal_impedance); + + if (full_volt < calc_full_volt(lut->volt, lut->cur, + bat->pdata->internal_impedance)) { + lut_size--; + while (lut_size--) { + int lut_volt1; + int lut_volt2; + + lut_volt1 = calc_full_volt(lut[0].volt, lut[0].cur, + bat->pdata->internal_impedance); + lut_volt2 = calc_full_volt(lut[1].volt, lut[1].cur, + bat->pdata->internal_impedance); + if (full_volt < lut_volt1 && full_volt >= lut_volt2) { + new_level = (lut[1].level + + (lut[0].level - lut[1].level) * + (full_volt - lut_volt2) / + (lut_volt1 - lut_volt2)) * 1000; + break; + } + new_level = lut[1].level * 1000; + lut++; + } + } + + bat->level = new_level; + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + if (bat->pdata->gpio_charge_finished < 0) + val->intval = bat->level == 100000 ? + POWER_SUPPLY_STATUS_FULL : bat->status; + else + val->intval = bat->status; + return 0; + case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: + val->intval = 100000; + return 0; + case POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN: + val->intval = 0; + return 0; + case POWER_SUPPLY_PROP_CHARGE_NOW: + val->intval = bat->level; + return 0; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + val->intval = bat->volt_value; + return 0; + case POWER_SUPPLY_PROP_CURRENT_NOW: + val->intval = bat->cur_value; + return 0; + default: + return -EINVAL; + } +} + +static struct s3c_adc_bat main_bat = { + .psy = { + .name = "main-battery", + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = s3c_adc_main_bat_props, + .num_properties = ARRAY_SIZE(s3c_adc_main_bat_props), + .get_property = s3c_adc_bat_get_property, + .external_power_changed = s3c_adc_bat_ext_power_changed, + .use_for_apm = 1, + }, +}; + +static void s3c_adc_bat_work(struct work_struct *work) +{ + struct s3c_adc_bat *bat = &main_bat; + int is_charged; + int is_plugged; + static int was_plugged; + + is_plugged = power_supply_am_i_supplied(&bat->psy); + bat->cable_plugged = is_plugged; + if (is_plugged != was_plugged) { + was_plugged = is_plugged; + if (is_plugged) { + if (bat->pdata->enable_charger) + bat->pdata->enable_charger(); + bat->status = POWER_SUPPLY_STATUS_CHARGING; + } else { + if (bat->pdata->disable_charger) + bat->pdata->disable_charger(); + bat->status = POWER_SUPPLY_STATUS_DISCHARGING; + } + } else { + if ((bat->pdata->gpio_charge_finished >= 0) && is_plugged) { + is_charged = gpio_get_value( + main_bat.pdata->gpio_charge_finished); + if (is_charged) { + if (bat->pdata->disable_charger) + bat->pdata->disable_charger(); + bat->status = POWER_SUPPLY_STATUS_FULL; + } else { + if (bat->pdata->enable_charger) + bat->pdata->enable_charger(); + bat->status = POWER_SUPPLY_STATUS_CHARGING; + } + } + } + + power_supply_changed(&bat->psy); +} + +static irqreturn_t s3c_adc_bat_charged(int irq, void *dev_id) +{ + schedule_delayed_work(&bat_work, + msecs_to_jiffies(JITTER_DELAY)); + return IRQ_HANDLED; +} + +static int __init s3c_adc_bat_probe(struct platform_device *pdev) +{ + struct s3c_adc_client *client; + struct s3c_adc_bat_pdata *pdata = pdev->dev.platform_data; + int ret; + + client = s3c_adc_register(pdev, NULL, NULL, 0); + if (IS_ERR(client)) { + dev_err(&pdev->dev, "cannot register adc\n"); + return PTR_ERR(client); + } + + platform_set_drvdata(pdev, client); + + main_bat.client = client; + main_bat.pdata = pdata; + main_bat.volt_value = -1; + main_bat.cur_value = -1; + main_bat.cable_plugged = 0; + main_bat.status = POWER_SUPPLY_STATUS_DISCHARGING; + + ret = power_supply_register(&pdev->dev, &main_bat.psy); + if (ret) + goto err_reg_main; + if (pdata->backup_volt_mult) { + backup_bat.client = client; + backup_bat.pdata = pdev->dev.platform_data; + backup_bat.volt_value = -1; + ret = power_supply_register(&pdev->dev, &backup_bat.psy); + if (ret) + goto err_reg_backup; + } + + INIT_DELAYED_WORK(&bat_work, s3c_adc_bat_work); + + if (pdata->gpio_charge_finished >= 0) { + ret = gpio_request(pdata->gpio_charge_finished, "charged"); + if (ret) + goto err_gpio; + + ret = request_irq(gpio_to_irq(pdata->gpio_charge_finished), + s3c_adc_bat_charged, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "battery charged", NULL); + if (ret) + goto err_irq; + } + + if (pdata->init) { + ret = pdata->init(); + if (ret) + goto err_platform; + } + + dev_info(&pdev->dev, "successfully loaded\n"); + device_init_wakeup(&pdev->dev, 1); + + /* Schedule timer to check current status */ + schedule_delayed_work(&bat_work, + msecs_to_jiffies(JITTER_DELAY)); + + return 0; + +err_platform: + if (pdata->gpio_charge_finished >= 0) + free_irq(gpio_to_irq(pdata->gpio_charge_finished), NULL); +err_irq: + if (pdata->gpio_charge_finished >= 0) + gpio_free(pdata->gpio_charge_finished); +err_gpio: + if (pdata->backup_volt_mult) + power_supply_unregister(&backup_bat.psy); +err_reg_backup: + power_supply_unregister(&main_bat.psy); +err_reg_main: + return ret; +} + +static int s3c_adc_bat_remove(struct platform_device *pdev) +{ + struct s3c_adc_client *client = platform_get_drvdata(pdev); + struct s3c_adc_bat_pdata *pdata = pdev->dev.platform_data; + + power_supply_unregister(&main_bat.psy); + if (pdata->backup_volt_mult) + power_supply_unregister(&backup_bat.psy); + + s3c_adc_release(client); + + if (pdata->gpio_charge_finished >= 0) { + free_irq(gpio_to_irq(pdata->gpio_charge_finished), NULL); + gpio_free(pdata->gpio_charge_finished); + } + + cancel_delayed_work(&bat_work); + + if (pdata->exit) + pdata->exit(); + + return 0; +} + +#ifdef CONFIG_PM +static int s3c_adc_bat_suspend(struct platform_device *pdev, + pm_message_t state) +{ + struct s3c_adc_bat_pdata *pdata = pdev->dev.platform_data; + + if (pdata->gpio_charge_finished >= 0) { + if (device_may_wakeup(&pdev->dev)) + enable_irq_wake( + gpio_to_irq(pdata->gpio_charge_finished)); + else { + disable_irq(gpio_to_irq(pdata->gpio_charge_finished)); + main_bat.pdata->disable_charger(); + } + } + + return 0; +} + +static int s3c_adc_bat_resume(struct platform_device *pdev) +{ + struct s3c_adc_bat_pdata *pdata = pdev->dev.platform_data; + + if (pdata->gpio_charge_finished >= 0) { + if (device_may_wakeup(&pdev->dev)) + disable_irq_wake( + gpio_to_irq(pdata->gpio_charge_finished)); + else + enable_irq(gpio_to_irq(pdata->gpio_charge_finished)); + } + + /* Schedule timer to check current status */ + schedule_delayed_work(&bat_work, + msecs_to_jiffies(JITTER_DELAY)); + + return 0; +} +#else +#define s3c_adc_battery_suspend NULL +#define s3c_adc_battery_resume NULL +#endif + +static struct platform_driver s3c_adc_bat_driver = { + .driver = { + .name = "s3c-adc-battery", + }, + .probe = s3c_adc_bat_probe, + .remove = s3c_adc_bat_remove, + .suspend = s3c_adc_bat_suspend, + .resume = s3c_adc_bat_resume, +}; + +static int __init s3c_adc_bat_init(void) +{ + return platform_driver_register(&s3c_adc_bat_driver); +} +module_init(s3c_adc_bat_init); + +static void __exit s3c_adc_bat_exit(void) +{ + platform_driver_unregister(&s3c_adc_bat_driver); +} +module_exit(s3c_adc_bat_exit); + +MODULE_AUTHOR("Vasily Khoruzhick <anarsoul@gmail.com>"); +MODULE_DESCRIPTION("iPAQ H1930/H1940/RX1950 battery controler driver"); +MODULE_LICENSE("GPL"); |