diff options
Diffstat (limited to 'arch/x86/pci')
-rw-r--r-- | arch/x86/pci/acpi.c | 9 | ||||
-rw-r--r-- | arch/x86/pci/amd_bus.c | 2 | ||||
-rw-r--r-- | arch/x86/pci/common.c | 32 | ||||
-rw-r--r-- | arch/x86/pci/direct.c | 6 | ||||
-rw-r--r-- | arch/x86/pci/early.c | 2 | ||||
-rw-r--r-- | arch/x86/pci/fixup.c | 3 | ||||
-rw-r--r-- | arch/x86/pci/i386.c | 6 | ||||
-rw-r--r-- | arch/x86/pci/init.c | 5 | ||||
-rw-r--r-- | arch/x86/pci/irq.c | 57 | ||||
-rw-r--r-- | arch/x86/pci/legacy.c | 2 | ||||
-rw-r--r-- | arch/x86/pci/mmconfig-shared.c | 3 | ||||
-rw-r--r-- | arch/x86/pci/mmconfig_32.c | 2 | ||||
-rw-r--r-- | arch/x86/pci/mmconfig_64.c | 3 | ||||
-rw-r--r-- | arch/x86/pci/numaq_32.c | 2 | ||||
-rw-r--r-- | arch/x86/pci/olpc.c | 2 | ||||
-rw-r--r-- | arch/x86/pci/pcbios.c | 5 | ||||
-rw-r--r-- | arch/x86/pci/pci.h | 161 | ||||
-rw-r--r-- | arch/x86/pci/visws.c | 23 |
18 files changed, 81 insertions, 244 deletions
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index 1d88d2b39771..c0ecf250fe51 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -4,7 +4,7 @@ #include <linux/irq.h> #include <linux/dmi.h> #include <asm/numa.h> -#include "pci.h" +#include <asm/pci_x86.h> struct pci_root_info { char *name; @@ -210,11 +210,10 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do if (bus && node != -1) { #ifdef CONFIG_ACPI_NUMA if (pxm >= 0) - printk(KERN_DEBUG "bus %02x -> pxm %d -> node %d\n", - busnum, pxm, node); + dev_printk(KERN_DEBUG, &bus->dev, + "on NUMA node %d (pxm %d)\n", node, pxm); #else - printk(KERN_DEBUG "bus %02x -> node %d\n", - busnum, node); + dev_printk(KERN_DEBUG, &bus->dev, "on NUMA node %d\n", node); #endif } diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c index 22e057665e55..9bb09823b362 100644 --- a/arch/x86/pci/amd_bus.c +++ b/arch/x86/pci/amd_bus.c @@ -2,7 +2,7 @@ #include <linux/pci.h> #include <linux/topology.h> #include <linux/cpu.h> -#include "pci.h" +#include <asm/pci_x86.h> #ifdef CONFIG_X86_64 #include <asm/pci-direct.h> diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index b67732bbb85a..82d22fc601ae 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -14,8 +14,7 @@ #include <asm/segment.h> #include <asm/io.h> #include <asm/smp.h> - -#include "pci.h" +#include <asm/pci_x86.h> unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 | PCI_PROBE_MMCONF; @@ -23,6 +22,12 @@ unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 | unsigned int pci_early_dump_regs; static int pci_bf_sort; int pci_routeirq; +int noioapicquirk; +#ifdef CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS +int noioapicreroute = 0; +#else +int noioapicreroute = 1; +#endif int pcibios_last_bus = -1; unsigned long pirq_table_addr; struct pci_bus *pci_root_bus; @@ -519,6 +524,17 @@ char * __devinit pcibios_setup(char *str) } else if (!strcmp(str, "skip_isa_align")) { pci_probe |= PCI_CAN_SKIP_ISA_ALIGN; return NULL; + } else if (!strcmp(str, "noioapicquirk")) { + noioapicquirk = 1; + return NULL; + } else if (!strcmp(str, "ioapicreroute")) { + if (noioapicreroute != -1) + noioapicreroute = 0; + return NULL; + } else if (!strcmp(str, "noioapicreroute")) { + if (noioapicreroute != -1) + noioapicreroute = 1; + return NULL; } return str; } @@ -535,17 +551,25 @@ int pcibios_enable_device(struct pci_dev *dev, int mask) if ((err = pci_enable_resources(dev, mask)) < 0) return err; - if (!dev->msi_enabled) + if (!pci_dev_msi_enabled(dev)) return pcibios_enable_irq(dev); return 0; } void pcibios_disable_device (struct pci_dev *dev) { - if (!dev->msi_enabled && pcibios_disable_irq) + if (!pci_dev_msi_enabled(dev) && pcibios_disable_irq) pcibios_disable_irq(dev); } +int pci_ext_cfg_avail(struct pci_dev *dev) +{ + if (raw_pci_ext_ops) + return 1; + else + return 0; +} + struct pci_bus * __devinit pci_scan_bus_on_node(int busno, struct pci_ops *ops, int node) { struct pci_bus *bus = NULL; diff --git a/arch/x86/pci/direct.c b/arch/x86/pci/direct.c index 9915293500fb..bd13c3e4c6db 100644 --- a/arch/x86/pci/direct.c +++ b/arch/x86/pci/direct.c @@ -5,7 +5,7 @@ #include <linux/pci.h> #include <linux/init.h> #include <linux/dmi.h> -#include "pci.h" +#include <asm/pci_x86.h> /* * Functions for accessing PCI base (first 256 bytes) and extended @@ -173,7 +173,7 @@ static int pci_conf2_write(unsigned int seg, unsigned int bus, #undef PCI_CONF2_ADDRESS -static struct pci_raw_ops pci_direct_conf2 = { +struct pci_raw_ops pci_direct_conf2 = { .read = pci_conf2_read, .write = pci_conf2_write, }; @@ -289,6 +289,7 @@ int __init pci_direct_probe(void) if (pci_check_type1()) { raw_pci_ops = &pci_direct_conf1; + port_cf9_safe = true; return 1; } release_resource(region); @@ -305,6 +306,7 @@ int __init pci_direct_probe(void) if (pci_check_type2()) { raw_pci_ops = &pci_direct_conf2; + port_cf9_safe = true; return 2; } diff --git a/arch/x86/pci/early.c b/arch/x86/pci/early.c index 86631ccbc25a..f6adf2c6d751 100644 --- a/arch/x86/pci/early.c +++ b/arch/x86/pci/early.c @@ -2,7 +2,7 @@ #include <linux/pci.h> #include <asm/pci-direct.h> #include <asm/io.h> -#include "pci.h" +#include <asm/pci_x86.h> /* Direct PCI access. This is used for PCI accesses in early boot before the PCI subsystem works. */ diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c index 2051dc96b8e9..7d388d5cf548 100644 --- a/arch/x86/pci/fixup.c +++ b/arch/x86/pci/fixup.c @@ -6,8 +6,7 @@ #include <linux/dmi.h> #include <linux/pci.h> #include <linux/init.h> -#include "pci.h" - +#include <asm/pci_x86.h> static void __devinit pci_fixup_i450nx(struct pci_dev *d) { diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c index 844df0cbbd3e..f884740da318 100644 --- a/arch/x86/pci/i386.c +++ b/arch/x86/pci/i386.c @@ -34,8 +34,8 @@ #include <asm/pat.h> #include <asm/e820.h> +#include <asm/pci_x86.h> -#include "pci.h" static int skip_isa_ioresource_align(struct pci_dev *dev) { @@ -129,7 +129,7 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list) pr = pci_find_parent_resource(dev, r); if (!r->start || !pr || request_resource(pr, r) < 0) { - dev_err(&dev->dev, "BAR %d: can't allocate resource\n", idx); + dev_info(&dev->dev, "BAR %d: can't allocate resource\n", idx); /* * Something is wrong with the region. * Invalidate the resource to prevent @@ -170,7 +170,7 @@ static void __init pcibios_allocate_resources(int pass) r->flags, disabled, pass); pr = pci_find_parent_resource(dev, r); if (!pr || request_resource(pr, r) < 0) { - dev_err(&dev->dev, "BAR %d: can't allocate resource\n", idx); + dev_info(&dev->dev, "BAR %d: can't allocate resource\n", idx); /* We'll assign a new address later */ r->end -= r->start; r->start = 0; diff --git a/arch/x86/pci/init.c b/arch/x86/pci/init.c index d6c950f81858..25a1f8efed4a 100644 --- a/arch/x86/pci/init.c +++ b/arch/x86/pci/init.c @@ -1,6 +1,6 @@ #include <linux/pci.h> #include <linux/init.h> -#include "pci.h" +#include <asm/pci_x86.h> /* arch_initcall has too random ordering, so call the initializers in the right sequence from here. */ @@ -12,7 +12,8 @@ static __init int pci_arch_init(void) type = pci_direct_probe(); #endif - pci_mmcfg_early_init(); + if (!(pci_probe & PCI_PROBE_NOEARLY)) + pci_mmcfg_early_init(); #ifdef CONFIG_PCI_OLPC if (!pci_olpc_init()) diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c index bf69dbe08bff..4064345cf144 100644 --- a/arch/x86/pci/irq.c +++ b/arch/x86/pci/irq.c @@ -16,8 +16,7 @@ #include <asm/io_apic.h> #include <linux/irq.h> #include <linux/acpi.h> - -#include "pci.h" +#include <asm/pci_x86.h> #define PIRQ_SIGNATURE (('$' << 0) + ('P' << 8) + ('I' << 16) + ('R' << 24)) #define PIRQ_VERSION 0x0100 @@ -534,7 +533,7 @@ static int pirq_bios_set(struct pci_dev *router, struct pci_dev *dev, int pirq, { struct pci_dev *bridge; int pin = pci_get_interrupt_pin(dev, &bridge); - return pcibios_set_irq_routing(bridge, pin, irq); + return pcibios_set_irq_routing(bridge, pin - 1, irq); } #endif @@ -888,7 +887,6 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign) dev_dbg(&dev->dev, "no interrupt pin\n"); return 0; } - pin = pin - 1; /* Find IRQ routing entry */ @@ -898,17 +896,17 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign) info = pirq_get_info(dev); if (!info) { dev_dbg(&dev->dev, "PCI INT %c not found in routing table\n", - 'A' + pin); + 'A' + pin - 1); return 0; } - pirq = info->irq[pin].link; - mask = info->irq[pin].bitmap; + pirq = info->irq[pin - 1].link; + mask = info->irq[pin - 1].bitmap; if (!pirq) { - dev_dbg(&dev->dev, "PCI INT %c not routed\n", 'A' + pin); + dev_dbg(&dev->dev, "PCI INT %c not routed\n", 'A' + pin - 1); return 0; } dev_dbg(&dev->dev, "PCI INT %c -> PIRQ %02x, mask %04x, excl %04x", - 'A' + pin, pirq, mask, pirq_table->exclusive_irqs); + 'A' + pin - 1, pirq, mask, pirq_table->exclusive_irqs); mask &= pcibios_irq_mask; /* Work around broken HP Pavilion Notebooks which assign USB to @@ -950,7 +948,7 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign) newirq = i; } } - dev_dbg(&dev->dev, "PCI INT %c -> newirq %d", 'A' + pin, newirq); + dev_dbg(&dev->dev, "PCI INT %c -> newirq %d", 'A' + pin - 1, newirq); /* Check if it is hardcoded */ if ((pirq & 0xf0) == 0xf0) { @@ -978,18 +976,18 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign) return 0; } } - dev_info(&dev->dev, "%s PCI INT %c -> IRQ %d\n", msg, 'A' + pin, irq); + dev_info(&dev->dev, "%s PCI INT %c -> IRQ %d\n", msg, 'A' + pin - 1, irq); /* Update IRQ for all devices with the same pirq value */ while ((dev2 = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev2)) != NULL) { pci_read_config_byte(dev2, PCI_INTERRUPT_PIN, &pin); if (!pin) continue; - pin--; + info = pirq_get_info(dev2); if (!info) continue; - if (info->irq[pin].link == pirq) { + if (info->irq[pin - 1].link == pirq) { /* * We refuse to override the dev->irq * information. Give a warning! @@ -1043,6 +1041,9 @@ static void __init pcibios_fixup_irqs(void) dev = NULL; while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); + if (!pin) + continue; + #ifdef CONFIG_X86_IO_APIC /* * Recalculate IRQ numbers if we use the I/O APIC. @@ -1050,15 +1051,11 @@ static void __init pcibios_fixup_irqs(void) if (io_apic_assign_pci_irqs) { int irq; - if (!pin) - continue; - /* * interrupt pins are numbered starting from 1 */ - pin--; irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, - PCI_SLOT(dev->devfn), pin); + PCI_SLOT(dev->devfn), pin - 1); /* * Busses behind bridges are typically not listed in the * MP-table. In this case we have to look up the IRQ @@ -1071,22 +1068,22 @@ static void __init pcibios_fixup_irqs(void) struct pci_dev *bridge = dev->bus->self; int bus; - pin = (pin + PCI_SLOT(dev->devfn)) % 4; + pin = pci_swizzle_interrupt_pin(dev, pin); bus = bridge->bus->number; irq = IO_APIC_get_PCI_irq_vector(bus, - PCI_SLOT(bridge->devfn), pin); + PCI_SLOT(bridge->devfn), pin - 1); if (irq >= 0) dev_warn(&dev->dev, "using bridge %s INT %c to " "get IRQ %d\n", pci_name(bridge), - 'A' + pin, irq); + 'A' + pin - 1, irq); } if (irq >= 0) { dev_info(&dev->dev, "PCI->APIC IRQ transform: INT %c " "-> IRQ %d\n", - 'A' + pin, irq); + 'A' + pin - 1, irq); dev->irq = irq; } } @@ -1094,7 +1091,7 @@ static void __init pcibios_fixup_irqs(void) /* * Still no IRQ? Try to lookup one... */ - if (pin && !dev->irq) + if (!dev->irq) pcibios_lookup_irq(dev, 0); } } @@ -1221,12 +1218,10 @@ static int pirq_enable_irq(struct pci_dev *dev) if (pin && !pcibios_lookup_irq(dev, 1) && !dev->irq) { char *msg = ""; - pin--; /* interrupt pins are numbered starting from 1 */ - if (io_apic_assign_pci_irqs) { int irq; - irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, PCI_SLOT(dev->devfn), pin); + irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, PCI_SLOT(dev->devfn), pin - 1); /* * Busses behind bridges are typically not listed in the MP-table. * In this case we have to look up the IRQ based on the parent bus, @@ -1237,20 +1232,20 @@ static int pirq_enable_irq(struct pci_dev *dev) while (irq < 0 && dev->bus->parent) { /* go back to the bridge */ struct pci_dev *bridge = dev->bus->self; - pin = (pin + PCI_SLOT(dev->devfn)) % 4; + pin = pci_swizzle_interrupt_pin(dev, pin); irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number, - PCI_SLOT(bridge->devfn), pin); + PCI_SLOT(bridge->devfn), pin - 1); if (irq >= 0) dev_warn(&dev->dev, "using bridge %s " "INT %c to get IRQ %d\n", - pci_name(bridge), 'A' + pin, + pci_name(bridge), 'A' + pin - 1, irq); dev = bridge; } dev = temp_dev; if (irq >= 0) { dev_info(&dev->dev, "PCI->APIC IRQ transform: " - "INT %c -> IRQ %d\n", 'A' + pin, irq); + "INT %c -> IRQ %d\n", 'A' + pin - 1, irq); dev->irq = irq; return 0; } else @@ -1269,7 +1264,7 @@ static int pirq_enable_irq(struct pci_dev *dev) return 0; dev_warn(&dev->dev, "can't find IRQ for PCI INT %c%s\n", - 'A' + pin, msg); + 'A' + pin - 1, msg); } return 0; } diff --git a/arch/x86/pci/legacy.c b/arch/x86/pci/legacy.c index b722dd481b39..f1065b129e9c 100644 --- a/arch/x86/pci/legacy.c +++ b/arch/x86/pci/legacy.c @@ -3,7 +3,7 @@ */ #include <linux/init.h> #include <linux/pci.h> -#include "pci.h" +#include <asm/pci_x86.h> /* * Discover remaining PCI buses in case there are peer host bridges. diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c index 654a2234f8f3..89bf9242c80a 100644 --- a/arch/x86/pci/mmconfig-shared.c +++ b/arch/x86/pci/mmconfig-shared.c @@ -15,8 +15,7 @@ #include <linux/acpi.h> #include <linux/bitmap.h> #include <asm/e820.h> - -#include "pci.h" +#include <asm/pci_x86.h> /* aperture is up to 256MB but BIOS may reserve less */ #define MMCONFIG_APER_MIN (2 * 1024*1024) diff --git a/arch/x86/pci/mmconfig_32.c b/arch/x86/pci/mmconfig_32.c index f3c761dce695..8b2d561046a3 100644 --- a/arch/x86/pci/mmconfig_32.c +++ b/arch/x86/pci/mmconfig_32.c @@ -13,7 +13,7 @@ #include <linux/init.h> #include <linux/acpi.h> #include <asm/e820.h> -#include "pci.h" +#include <asm/pci_x86.h> /* Assume systems with more busses have correct MCFG */ #define mmcfg_virt_addr ((void __iomem *) fix_to_virt(FIX_PCIE_MCFG)) diff --git a/arch/x86/pci/mmconfig_64.c b/arch/x86/pci/mmconfig_64.c index a1994163c99d..30007ffc8e11 100644 --- a/arch/x86/pci/mmconfig_64.c +++ b/arch/x86/pci/mmconfig_64.c @@ -10,8 +10,7 @@ #include <linux/acpi.h> #include <linux/bitmap.h> #include <asm/e820.h> - -#include "pci.h" +#include <asm/pci_x86.h> /* Static virtual mapping of the MMCONFIG aperture */ struct mmcfg_virt { diff --git a/arch/x86/pci/numaq_32.c b/arch/x86/pci/numaq_32.c index 1177845d3186..2089354968a2 100644 --- a/arch/x86/pci/numaq_32.c +++ b/arch/x86/pci/numaq_32.c @@ -7,7 +7,7 @@ #include <linux/nodemask.h> #include <mach_apic.h> #include <asm/mpspec.h> -#include "pci.h" +#include <asm/pci_x86.h> #define XQUAD_PORTIO_BASE 0xfe400000 #define XQUAD_PORTIO_QUAD 0x40000 /* 256k per quad. */ diff --git a/arch/x86/pci/olpc.c b/arch/x86/pci/olpc.c index e11e9e803d5f..b889d824f7c6 100644 --- a/arch/x86/pci/olpc.c +++ b/arch/x86/pci/olpc.c @@ -29,7 +29,7 @@ #include <linux/init.h> #include <asm/olpc.h> #include <asm/geode.h> -#include "pci.h" +#include <asm/pci_x86.h> /* * In the tables below, the first two line (8 longwords) are the diff --git a/arch/x86/pci/pcbios.c b/arch/x86/pci/pcbios.c index 37472fc6f729..b82cae970dfd 100644 --- a/arch/x86/pci/pcbios.c +++ b/arch/x86/pci/pcbios.c @@ -6,9 +6,8 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/uaccess.h> -#include "pci.h" -#include "pci-functions.h" - +#include <asm/pci_x86.h> +#include <asm/mach-default/pci-functions.h> /* BIOS32 signature: "_32_" */ #define BIOS32_SIGNATURE (('_' << 0) + ('3' << 8) + ('2' << 16) + ('_' << 24)) diff --git a/arch/x86/pci/pci.h b/arch/x86/pci/pci.h deleted file mode 100644 index 15b9cf6be729..000000000000 --- a/arch/x86/pci/pci.h +++ /dev/null @@ -1,161 +0,0 @@ -/* - * Low-Level PCI Access for i386 machines. - * - * (c) 1999 Martin Mares <mj@ucw.cz> - */ - -#undef DEBUG - -#ifdef DEBUG -#define DBG(x...) printk(x) -#else -#define DBG(x...) -#endif - -#define PCI_PROBE_BIOS 0x0001 -#define PCI_PROBE_CONF1 0x0002 -#define PCI_PROBE_CONF2 0x0004 -#define PCI_PROBE_MMCONF 0x0008 -#define PCI_PROBE_MASK 0x000f -#define PCI_PROBE_NOEARLY 0x0010 - -#define PCI_NO_CHECKS 0x0400 -#define PCI_USE_PIRQ_MASK 0x0800 -#define PCI_ASSIGN_ROMS 0x1000 -#define PCI_BIOS_IRQ_SCAN 0x2000 -#define PCI_ASSIGN_ALL_BUSSES 0x4000 -#define PCI_CAN_SKIP_ISA_ALIGN 0x8000 -#define PCI_USE__CRS 0x10000 -#define PCI_CHECK_ENABLE_AMD_MMCONF 0x20000 -#define PCI_HAS_IO_ECS 0x40000 -#define PCI_NOASSIGN_ROMS 0x80000 - -extern unsigned int pci_probe; -extern unsigned long pirq_table_addr; - -enum pci_bf_sort_state { - pci_bf_sort_default, - pci_force_nobf, - pci_force_bf, - pci_dmi_bf, -}; - -/* pci-i386.c */ - -extern unsigned int pcibios_max_latency; - -void pcibios_resource_survey(void); - -/* pci-pc.c */ - -extern int pcibios_last_bus; -extern struct pci_bus *pci_root_bus; -extern struct pci_ops pci_root_ops; - -/* pci-irq.c */ - -struct irq_info { - u8 bus, devfn; /* Bus, device and function */ - struct { - u8 link; /* IRQ line ID, chipset dependent, 0=not routed */ - u16 bitmap; /* Available IRQs */ - } __attribute__((packed)) irq[4]; - u8 slot; /* Slot number, 0=onboard */ - u8 rfu; -} __attribute__((packed)); - -struct irq_routing_table { - u32 signature; /* PIRQ_SIGNATURE should be here */ - u16 version; /* PIRQ_VERSION */ - u16 size; /* Table size in bytes */ - u8 rtr_bus, rtr_devfn; /* Where the interrupt router lies */ - u16 exclusive_irqs; /* IRQs devoted exclusively to PCI usage */ - u16 rtr_vendor, rtr_device; /* Vendor and device ID of interrupt router */ - u32 miniport_data; /* Crap */ - u8 rfu[11]; - u8 checksum; /* Modulo 256 checksum must give zero */ - struct irq_info slots[0]; -} __attribute__((packed)); - -extern unsigned int pcibios_irq_mask; - -extern int pcibios_scanned; -extern spinlock_t pci_config_lock; - -extern int (*pcibios_enable_irq)(struct pci_dev *dev); -extern void (*pcibios_disable_irq)(struct pci_dev *dev); - -struct pci_raw_ops { - int (*read)(unsigned int domain, unsigned int bus, unsigned int devfn, - int reg, int len, u32 *val); - int (*write)(unsigned int domain, unsigned int bus, unsigned int devfn, - int reg, int len, u32 val); -}; - -extern struct pci_raw_ops *raw_pci_ops; -extern struct pci_raw_ops *raw_pci_ext_ops; - -extern struct pci_raw_ops pci_direct_conf1; - -/* arch_initcall level */ -extern int pci_direct_probe(void); -extern void pci_direct_init(int type); -extern void pci_pcbios_init(void); -extern int pci_olpc_init(void); -extern void __init dmi_check_pciprobe(void); -extern void __init dmi_check_skip_isa_align(void); - -/* some common used subsys_initcalls */ -extern int __init pci_acpi_init(void); -extern int __init pcibios_irq_init(void); -extern int __init pci_visws_init(void); -extern int __init pci_numaq_init(void); -extern int __init pcibios_init(void); - -/* pci-mmconfig.c */ - -extern int __init pci_mmcfg_arch_init(void); -extern void __init pci_mmcfg_arch_free(void); - -/* - * AMD Fam10h CPUs are buggy, and cannot access MMIO config space - * on their northbrige except through the * %eax register. As such, you MUST - * NOT use normal IOMEM accesses, you need to only use the magic mmio-config - * accessor functions. - * In fact just use pci_config_*, nothing else please. - */ -static inline unsigned char mmio_config_readb(void __iomem *pos) -{ - u8 val; - asm volatile("movb (%1),%%al" : "=a" (val) : "r" (pos)); - return val; -} - -static inline unsigned short mmio_config_readw(void __iomem *pos) -{ - u16 val; - asm volatile("movw (%1),%%ax" : "=a" (val) : "r" (pos)); - return val; -} - -static inline unsigned int mmio_config_readl(void __iomem *pos) -{ - u32 val; - asm volatile("movl (%1),%%eax" : "=a" (val) : "r" (pos)); - return val; -} - -static inline void mmio_config_writeb(void __iomem *pos, u8 val) -{ - asm volatile("movb %%al,(%1)" :: "a" (val), "r" (pos) : "memory"); -} - -static inline void mmio_config_writew(void __iomem *pos, u16 val) -{ - asm volatile("movw %%ax,(%1)" :: "a" (val), "r" (pos) : "memory"); -} - -static inline void mmio_config_writel(void __iomem *pos, u32 val) -{ - asm volatile("movl %%eax,(%1)" :: "a" (val), "r" (pos) : "memory"); -} diff --git a/arch/x86/pci/visws.c b/arch/x86/pci/visws.c index 42f4cb19faca..bcead7a46871 100644 --- a/arch/x86/pci/visws.c +++ b/arch/x86/pci/visws.c @@ -9,11 +9,10 @@ #include <linux/init.h> #include <asm/setup.h> +#include <asm/pci_x86.h> #include <asm/visws/cobalt.h> #include <asm/visws/lithium.h> -#include "pci.h" - static int pci_visws_enable_irq(struct pci_dev *dev) { return 0; } static void pci_visws_disable_irq(struct pci_dev *dev) { } @@ -25,24 +24,6 @@ static void pci_visws_disable_irq(struct pci_dev *dev) { } unsigned int pci_bus0, pci_bus1; -static inline u8 bridge_swizzle(u8 pin, u8 slot) -{ - return (((pin - 1) + slot) % 4) + 1; -} - -static u8 __init visws_swizzle(struct pci_dev *dev, u8 *pinp) -{ - u8 pin = *pinp; - - while (dev->bus->self) { /* Move up the chain of bridges. */ - pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)); - dev = dev->bus->self; - } - *pinp = pin; - - return PCI_SLOT(dev->devfn); -} - static int __init visws_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { int irq, bus = dev->bus->number; @@ -107,7 +88,7 @@ int __init pci_visws_init(void) raw_pci_ops = &pci_direct_conf1; pci_scan_bus_with_sysdata(pci_bus0); pci_scan_bus_with_sysdata(pci_bus1); - pci_fixup_irqs(visws_swizzle, visws_map_irq); + pci_fixup_irqs(pci_common_swizzle, visws_map_irq); pcibios_resource_survey(); return 0; } |