diff options
Diffstat (limited to 'arch/powerpc/platforms/powernv')
| -rw-r--r-- | arch/powerpc/platforms/powernv/opal.c | 30 | ||||
| -rw-r--r-- | arch/powerpc/platforms/powernv/pci-ioda.c | 9 | ||||
| -rw-r--r-- | arch/powerpc/platforms/powernv/pci.c | 12 | ||||
| -rw-r--r-- | arch/powerpc/platforms/powernv/pci.h | 2 | ||||
| -rw-r--r-- | arch/powerpc/platforms/powernv/powernv.h | 2 | ||||
| -rw-r--r-- | arch/powerpc/platforms/powernv/setup.c | 16 | ||||
| -rw-r--r-- | arch/powerpc/platforms/powernv/smp.c | 62 |
7 files changed, 125 insertions, 8 deletions
diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c index ade4463226c6..628c564ceadb 100644 --- a/arch/powerpc/platforms/powernv/opal.c +++ b/arch/powerpc/platforms/powernv/opal.c @@ -15,6 +15,7 @@ #include <linux/of.h> #include <linux/of_platform.h> #include <linux/interrupt.h> +#include <linux/slab.h> #include <asm/opal.h> #include <asm/firmware.h> @@ -28,6 +29,8 @@ struct opal { static struct device_node *opal_node; static DEFINE_SPINLOCK(opal_write_lock); extern u64 opal_mc_secondary_handler[]; +static unsigned int *opal_irqs; +static unsigned int opal_irq_count; int __init early_init_dt_scan_opal(unsigned long node, const char *uname, int depth, void *data) @@ -53,7 +56,11 @@ int __init early_init_dt_scan_opal(unsigned long node, opal.entry, entryp, entrysz); powerpc_firmware_features |= FW_FEATURE_OPAL; - if (of_flat_dt_is_compatible(node, "ibm,opal-v2")) { + if (of_flat_dt_is_compatible(node, "ibm,opal-v3")) { + powerpc_firmware_features |= FW_FEATURE_OPALv2; + powerpc_firmware_features |= FW_FEATURE_OPALv3; + printk("OPAL V3 detected !\n"); + } else if (of_flat_dt_is_compatible(node, "ibm,opal-v2")) { powerpc_firmware_features |= FW_FEATURE_OPALv2; printk("OPAL V2 detected !\n"); } else { @@ -144,6 +151,13 @@ int opal_put_chars(uint32_t vtermno, const char *data, int total_len) rc == OPAL_BUSY_EVENT || rc == OPAL_SUCCESS)) { len = total_len; rc = opal_console_write(vtermno, &len, data); + + /* Closed or other error drop */ + if (rc != OPAL_SUCCESS && rc != OPAL_BUSY && + rc != OPAL_BUSY_EVENT) { + written = total_len; + break; + } if (rc == OPAL_SUCCESS) { total_len -= len; data += len; @@ -316,6 +330,8 @@ static int __init opal_init(void) irqs = of_get_property(opal_node, "opal-interrupts", &irqlen); pr_debug("opal: Found %d interrupts reserved for OPAL\n", irqs ? (irqlen / 4) : 0); + opal_irq_count = irqlen / 4; + opal_irqs = kzalloc(opal_irq_count * sizeof(unsigned int), GFP_KERNEL); for (i = 0; irqs && i < (irqlen / 4); i++, irqs++) { unsigned int hwirq = be32_to_cpup(irqs); unsigned int irq = irq_create_mapping(NULL, hwirq); @@ -327,7 +343,19 @@ static int __init opal_init(void) if (rc) pr_warning("opal: Error %d requesting irq %d" " (0x%x)\n", rc, irq, hwirq); + opal_irqs[i] = irq; } return 0; } subsys_initcall(opal_init); + +void opal_shutdown(void) +{ + unsigned int i; + + for (i = 0; i < opal_irq_count; i++) { + if (opal_irqs[i]) + free_irq(opal_irqs[i], 0); + opal_irqs[i] = 0; + } +} diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c index 1da578b7c1bf..3937aaae5bc4 100644 --- a/arch/powerpc/platforms/powernv/pci-ioda.c +++ b/arch/powerpc/platforms/powernv/pci-ioda.c @@ -1048,6 +1048,12 @@ static u32 pnv_ioda_bdfn_to_pe(struct pnv_phb *phb, struct pci_bus *bus, return phb->ioda.pe_rmap[(bus->number << 8) | devfn]; } +static void pnv_pci_ioda_shutdown(struct pnv_phb *phb) +{ + opal_pci_reset(phb->opal_id, OPAL_PCI_IODA_TABLE_RESET, + OPAL_ASSERT_RESET); +} + void __init pnv_pci_init_ioda_phb(struct device_node *np, int ioda_type) { struct pci_controller *hose; @@ -1178,6 +1184,9 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np, int ioda_type) /* Setup TCEs */ phb->dma_dev_setup = pnv_pci_ioda_dma_dev_setup; + /* Setup shutdown function for kexec */ + phb->shutdown = pnv_pci_ioda_shutdown; + /* Setup MSI support */ pnv_pci_init_ioda_msis(phb); diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c index 55dfca844ddf..163bd7422f1c 100644 --- a/arch/powerpc/platforms/powernv/pci.c +++ b/arch/powerpc/platforms/powernv/pci.c @@ -450,6 +450,18 @@ static void pnv_pci_dma_dev_setup(struct pci_dev *pdev) pnv_pci_dma_fallback_setup(hose, pdev); } +void pnv_pci_shutdown(void) +{ + struct pci_controller *hose; + + list_for_each_entry(hose, &hose_list, list_node) { + struct pnv_phb *phb = hose->private_data; + + if (phb && phb->shutdown) + phb->shutdown(phb); + } +} + /* Fixup wrong class code in p7ioc and p8 root complex */ static void pnv_p7ioc_rc_quirk(struct pci_dev *dev) { diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h index 48dc4bb856a1..25d76c4df50b 100644 --- a/arch/powerpc/platforms/powernv/pci.h +++ b/arch/powerpc/platforms/powernv/pci.h @@ -86,6 +86,7 @@ struct pnv_phb { void (*dma_dev_setup)(struct pnv_phb *phb, struct pci_dev *pdev); void (*fixup_phb)(struct pci_controller *hose); u32 (*bdfn_to_pe)(struct pnv_phb *phb, struct pci_bus *bus, u32 devfn); + void (*shutdown)(struct pnv_phb *phb); union { struct { @@ -158,4 +159,5 @@ extern void pnv_pci_init_ioda_hub(struct device_node *np); extern void pnv_pci_init_ioda2_phb(struct device_node *np); extern void pnv_pci_ioda_tce_invalidate(struct iommu_table *tbl, u64 *startp, u64 *endp); + #endif /* __POWERNV_PCI_H */ diff --git a/arch/powerpc/platforms/powernv/powernv.h b/arch/powerpc/platforms/powernv/powernv.h index 8a9df7f9667e..a1c6f83fc391 100644 --- a/arch/powerpc/platforms/powernv/powernv.h +++ b/arch/powerpc/platforms/powernv/powernv.h @@ -9,8 +9,10 @@ static inline void pnv_smp_init(void) { } #ifdef CONFIG_PCI extern void pnv_pci_init(void); +extern void pnv_pci_shutdown(void); #else static inline void pnv_pci_init(void) { } +static inline void pnv_pci_shutdown(void) { } #endif #endif /* _POWERNV_H */ diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c index db1ad1c8f68f..d4459bfc92f7 100644 --- a/arch/powerpc/platforms/powernv/setup.c +++ b/arch/powerpc/platforms/powernv/setup.c @@ -78,7 +78,9 @@ static void pnv_show_cpuinfo(struct seq_file *m) if (root) model = of_get_property(root, "model", NULL); seq_printf(m, "machine\t\t: PowerNV %s\n", model); - if (firmware_has_feature(FW_FEATURE_OPALv2)) + if (firmware_has_feature(FW_FEATURE_OPALv3)) + seq_printf(m, "firmware\t: OPAL v3\n"); + else if (firmware_has_feature(FW_FEATURE_OPALv2)) seq_printf(m, "firmware\t: OPAL v2\n"); else if (firmware_has_feature(FW_FEATURE_OPAL)) seq_printf(m, "firmware\t: OPAL v1\n"); @@ -126,6 +128,17 @@ static void pnv_progress(char *s, unsigned short hex) { } +static void pnv_shutdown(void) +{ + /* Let the PCI code clear up IODA tables */ + pnv_pci_shutdown(); + + /* And unregister all OPAL interrupts so they don't fire + * up while we kexec + */ + opal_shutdown(); +} + #ifdef CONFIG_KEXEC static void pnv_kexec_cpu_down(int crash_shutdown, int secondary) { @@ -187,6 +200,7 @@ define_machine(powernv) { .init_IRQ = pnv_init_IRQ, .show_cpuinfo = pnv_show_cpuinfo, .progress = pnv_progress, + .machine_shutdown = pnv_shutdown, .power_save = power7_idle, .calibrate_decr = generic_calibrate_decr, #ifdef CONFIG_KEXEC diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c index 6a3ecca5b725..88c9459c3e07 100644 --- a/arch/powerpc/platforms/powernv/smp.c +++ b/arch/powerpc/platforms/powernv/smp.c @@ -71,18 +71,68 @@ int pnv_smp_kick_cpu(int nr) BUG_ON(nr < 0 || nr >= NR_CPUS); - /* On OPAL v2 the CPU are still spinning inside OPAL itself, - * get them back now + /* + * If we already started or OPALv2 is not supported, we just + * kick the CPU via the PACA */ - if (!paca[nr].cpu_start && firmware_has_feature(FW_FEATURE_OPALv2)) { - pr_devel("OPAL: Starting CPU %d (HW 0x%x)...\n", nr, pcpu); - rc = opal_start_cpu(pcpu, start_here); + if (paca[nr].cpu_start || !firmware_has_feature(FW_FEATURE_OPALv2)) + goto kick; + + /* + * At this point, the CPU can either be spinning on the way in + * from kexec or be inside OPAL waiting to be started for the + * first time. OPAL v3 allows us to query OPAL to know if it + * has the CPUs, so we do that + */ + if (firmware_has_feature(FW_FEATURE_OPALv3)) { + uint8_t status; + + rc = opal_query_cpu_status(pcpu, &status); if (rc != OPAL_SUCCESS) { - pr_warn("OPAL Error %ld starting CPU %d\n", + pr_warn("OPAL Error %ld querying CPU %d state\n", rc, nr); return -ENODEV; } + + /* + * Already started, just kick it, probably coming from + * kexec and spinning + */ + if (status == OPAL_THREAD_STARTED) + goto kick; + + /* + * Available/inactive, let's kick it + */ + if (status == OPAL_THREAD_INACTIVE) { + pr_devel("OPAL: Starting CPU %d (HW 0x%x)...\n", + nr, pcpu); + rc = opal_start_cpu(pcpu, start_here); + if (rc != OPAL_SUCCESS) { + pr_warn("OPAL Error %ld starting CPU %d\n", + rc, nr); + return -ENODEV; + } + } else { + /* + * An unavailable CPU (or any other unknown status) + * shouldn't be started. It should also + * not be in the possible map but currently it can + * happen + */ + pr_devel("OPAL: CPU %d (HW 0x%x) is unavailable" + " (status %d)...\n", nr, pcpu, status); + return -ENODEV; + } + } else { + /* + * On OPAL v2, we just kick it and hope for the best, + * we must not test the error from opal_start_cpu() or + * we would fail to get CPUs from kexec. + */ + opal_start_cpu(pcpu, start_here); } + kick: return smp_generic_kick_cpu(nr); } |