1 files changed, 1 insertions, 70 deletions

diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
index 60b386c72c57..5060fc554aab 100644
--- a/arch/microblaze/pci/pci-common.c
+++ b/arch/microblaze/pci/pci-common.c
@@ -193,75 +193,6 @@ void pcibios_set_master(struct pci_dev *dev)
 }
 
 /*
- * Reads the interrupt pin to determine if interrupt is use by card.
- * If the interrupt is used, then gets the interrupt line from the
- * openfirmware and sets it in the pci_dev and pci_config line.
- */
-int pci_read_irq_line(struct pci_dev *pci_dev)
-{
-	struct of_phandle_args oirq;
-	unsigned int virq;
-
-	/* The current device-tree that iSeries generates from the HV
-	 * PCI informations doesn't contain proper interrupt routing,
-	 * and all the fallback would do is print out crap, so we
-	 * don't attempt to resolve the interrupts here at all, some
-	 * iSeries specific fixup does it.
-	 *
-	 * In the long run, we will hopefully fix the generated device-tree
-	 * instead.
-	 */
-	pr_debug("PCI: Try to map irq for %s...\n", pci_name(pci_dev));
-
-#ifdef DEBUG
-	memset(&oirq, 0xff, sizeof(oirq));
-#endif
-	/* Try to get a mapping from the device-tree */
-	if (of_irq_parse_pci(pci_dev, &oirq)) {
-		u8 line, pin;
-
-		/* If that fails, lets fallback to what is in the config
-		 * space and map that through the default controller. We
-		 * also set the type to level low since that's what PCI
-		 * interrupts are. If your platform does differently, then
-		 * either provide a proper interrupt tree or don't use this
-		 * function.
-		 */
-		if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &pin))
-			return -1;
-		if (pin == 0)
-			return -1;
-		if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &line) ||
-		    line == 0xff || line == 0) {
-			return -1;
-		}
-		pr_debug(" No map ! Using line %d (pin %d) from PCI config\n",
-			 line, pin);
-
-		virq = irq_create_mapping(NULL, line);
-		if (virq)
-			irq_set_irq_type(virq, IRQ_TYPE_LEVEL_LOW);
-	} else {
-		pr_debug(" Got one, spec %d cells (0x%08x 0x%08x...) on %s\n",
-			 oirq.args_count, oirq.args[0], oirq.args[1],
-			 of_node_full_name(oirq.np));
-
-		virq = irq_create_of_mapping(&oirq);
-	}
-	if (!virq) {
-		pr_debug(" Failed to map !\n");
-		return -1;
-	}
-
-	pr_debug(" Mapped to linux irq %d\n", virq);
-
-	pci_dev->irq = virq;
-
-	return 0;
-}
-EXPORT_SYMBOL(pci_read_irq_line);
-
-/*
  * Platform support for /proc/bus/pci/X/Y mmap()s,
  * modelled on the sparc64 implementation by Dave Miller.
  *  -- paulus.
@@ -959,7 +890,7 @@ void pcibios_setup_bus_devices(struct pci_bus *bus)
 		dev->dev.archdata.dma_data = (void *)PCI_DRAM_OFFSET;
 
 		/* Read default IRQs and fixup if necessary */
-		pci_read_irq_line(dev);
+		dev->irq = of_irq_parse_and_map_pci(dev, 0, 0);
 	}
 }