diff options
Diffstat (limited to 'drivers/mtd/nand/cmx270_nand.c')
| -rw-r--r-- | drivers/mtd/nand/cmx270_nand.c | 79 |
1 files changed, 47 insertions, 32 deletions
diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd/nand/cmx270_nand.c index cb663ef245d5..fc8529bedfdf 100644 --- a/drivers/mtd/nand/cmx270_nand.c +++ b/drivers/mtd/nand/cmx270_nand.c @@ -20,9 +20,11 @@ #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> +#include <linux/gpio.h> #include <asm/io.h> #include <asm/irq.h> +#include <asm/mach-types.h> #include <asm/arch/hardware.h> #include <asm/arch/pxa-regs.h> @@ -30,20 +32,6 @@ #define GPIO_NAND_CS (11) #define GPIO_NAND_RB (89) -/* This macro needed to ensure in-order operation of GPIO and local - * bus. Without both asm command and dummy uncached read there're - * states when NAND access is broken. I've looked for such macro(s) in - * include/asm-arm but found nothing approptiate. - * dmac_clean_range is close, but is makes cache invalidation - * unnecessary here and it cannot be used in module - */ -#define DRAIN_WB() \ - do { \ - unsigned char dummy; \ - asm volatile ("mcr p15, 0, r0, c7, c10, 4":::"r0"); \ - dummy=*((unsigned char*)UNCACHED_ADDR); \ - } while(0) - /* MTD structure for CM-X270 board */ static struct mtd_info *cmx270_nand_mtd; @@ -103,14 +91,14 @@ static int cmx270_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) static inline void nand_cs_on(void) { - GPCR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS); + gpio_set_value(GPIO_NAND_CS, 0); } static void nand_cs_off(void) { - DRAIN_WB(); + dsb(); - GPSR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS); + gpio_set_value(GPIO_NAND_CS, 1); } /* @@ -122,7 +110,7 @@ static void cmx270_hwcontrol(struct mtd_info *mtd, int dat, struct nand_chip* this = mtd->priv; unsigned int nandaddr = (unsigned int)this->IO_ADDR_W; - DRAIN_WB(); + dsb(); if (ctrl & NAND_CTRL_CHANGE) { if ( ctrl & NAND_ALE ) @@ -139,12 +127,12 @@ static void cmx270_hwcontrol(struct mtd_info *mtd, int dat, nand_cs_off(); } - DRAIN_WB(); + dsb(); this->IO_ADDR_W = (void __iomem*)nandaddr; if (dat != NAND_CMD_NONE) writel((dat << 16), this->IO_ADDR_W); - DRAIN_WB(); + dsb(); } /* @@ -152,9 +140,9 @@ static void cmx270_hwcontrol(struct mtd_info *mtd, int dat, */ static int cmx270_device_ready(struct mtd_info *mtd) { - DRAIN_WB(); + dsb(); - return (GPLR(GPIO_NAND_RB) & GPIO_bit(GPIO_NAND_RB)); + return (gpio_get_value(GPIO_NAND_RB)); } /* @@ -168,20 +156,40 @@ static int cmx270_init(void) int mtd_parts_nb = 0; int ret; + if (!machine_is_armcore()) + return -ENODEV; + + ret = gpio_request(GPIO_NAND_CS, "NAND CS"); + if (ret) { + pr_warning("CM-X270: failed to request NAND CS gpio\n"); + return ret; + } + + gpio_direction_output(GPIO_NAND_CS, 1); + + ret = gpio_request(GPIO_NAND_RB, "NAND R/B"); + if (ret) { + pr_warning("CM-X270: failed to request NAND R/B gpio\n"); + goto err_gpio_request; + } + + gpio_direction_input(GPIO_NAND_RB); + /* Allocate memory for MTD device structure and private data */ cmx270_nand_mtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL); if (!cmx270_nand_mtd) { - printk("Unable to allocate CM-X270 NAND MTD device structure.\n"); - return -ENOMEM; + pr_debug("Unable to allocate CM-X270 NAND MTD device structure.\n"); + ret = -ENOMEM; + goto err_kzalloc; } cmx270_nand_io = ioremap(PXA_CS1_PHYS, 12); if (!cmx270_nand_io) { - printk("Unable to ioremap NAND device\n"); + pr_debug("Unable to ioremap NAND device\n"); ret = -EINVAL; - goto err1; + goto err_ioremap; } /* Get pointer to private data */ @@ -209,9 +217,9 @@ static int cmx270_init(void) /* Scan to find existence of the device */ if (nand_scan (cmx270_nand_mtd, 1)) { - printk(KERN_NOTICE "No NAND device\n"); + pr_notice("No NAND device\n"); ret = -ENXIO; - goto err2; + goto err_scan; } #ifdef CONFIG_MTD_CMDLINE_PARTS @@ -229,18 +237,22 @@ static int cmx270_init(void) } /* Register the partitions */ - printk(KERN_NOTICE "Using %s partition definition\n", part_type); + pr_notice("Using %s partition definition\n", part_type); ret = add_mtd_partitions(cmx270_nand_mtd, mtd_parts, mtd_parts_nb); if (ret) - goto err2; + goto err_scan; /* Return happy */ return 0; -err2: +err_scan: iounmap(cmx270_nand_io); -err1: +err_ioremap: kfree(cmx270_nand_mtd); +err_kzalloc: + gpio_free(GPIO_NAND_RB); +err_gpio_request: + gpio_free(GPIO_NAND_CS); return ret; @@ -255,6 +267,9 @@ static void cmx270_cleanup(void) /* Release resources, unregister device */ nand_release(cmx270_nand_mtd); + gpio_free(GPIO_NAND_RB); + gpio_free(GPIO_NAND_CS); + iounmap(cmx270_nand_io); /* Free the MTD device structure */ |