1 files changed, 470 insertions, 0 deletions
diff --git a/arch/x86/kernel/mca_32.c b/arch/x86/kernel/mca_32.c
new file mode 100644
index 000000000000..b83672b89527
--- /dev/null
+++ b/arch/x86/kernel/mca_32.c
@@ -0,0 +1,470 @@
+/*
+ *  linux/arch/i386/kernel/mca.c
+ *  Written by Martin Kolinek, February 1996
+ *
+ * Changes:
+ *
+ *	Chris Beauregard July 28th, 1996
+ *	- Fixed up integrated SCSI detection
+ *
+ *	Chris Beauregard August 3rd, 1996
+ *	- Made mca_info local
+ *	- Made integrated registers accessible through standard function calls
+ *	- Added name field
+ *	- More sanity checking
+ *
+ *	Chris Beauregard August 9th, 1996
+ *	- Rewrote /proc/mca
+ *
+ *	Chris Beauregard January 7th, 1997
+ *	- Added basic NMI-processing
+ *	- Added more information to mca_info structure
+ *
+ *	David Weinehall October 12th, 1998
+ *	- Made a lot of cleaning up in the source
+ *	- Added use of save_flags / restore_flags
+ *	- Added the 'driver_loaded' flag in MCA_adapter
+ *	- Added an alternative implemention of ZP Gu's mca_find_unused_adapter
+ *
+ *	David Weinehall March 24th, 1999
+ *	- Fixed the output of 'Driver Installed' in /proc/mca/pos
+ *	- Made the Integrated Video & SCSI show up even if they have id 0000
+ *
+ *	Alexander Viro November 9th, 1999
+ *	- Switched to regular procfs methods
+ *
+ *	Alfred Arnold & David Weinehall August 23rd, 2000
+ *	- Added support for Planar POS-registers
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/mca.h>
+#include <linux/kprobes.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <linux/proc_fs.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/pagemap.h>
+#include <linux/ioport.h>
+#include <asm/uaccess.h>
+#include <linux/init.h>
+#include <asm/arch_hooks.h>
+
+static unsigned char which_scsi = 0;
+
+int MCA_bus = 0;
+EXPORT_SYMBOL(MCA_bus);
+
+/*
+ * Motherboard register spinlock. Untested on SMP at the moment, but
+ * are there any MCA SMP boxes?
+ *
+ * Yes - Alan
+ */
+static DEFINE_SPINLOCK(mca_lock);
+
+/* Build the status info for the adapter */
+
+static void mca_configure_adapter_status(struct mca_device *mca_dev) {
+	mca_dev->status = MCA_ADAPTER_NONE;
+
+	mca_dev->pos_id = mca_dev->pos[0]
+		+ (mca_dev->pos[1] << 8);
+
+	if(!mca_dev->pos_id && mca_dev->slot < MCA_MAX_SLOT_NR) {
+
+		/* id = 0x0000 usually indicates hardware failure,
+		 * however, ZP Gu (zpg@castle.net> reports that his 9556
+		 * has 0x0000 as id and everything still works. There
+		 * also seem to be an adapter with id = 0x0000; the
+		 * NCR Parallel Bus Memory Card. Until this is confirmed,
+		 * however, this code will stay.
+		 */
+
+		mca_dev->status = MCA_ADAPTER_ERROR;
+
+		return;
+	} else if(mca_dev->pos_id != 0xffff) {
+
+		/* 0xffff usually indicates that there's no adapter,
+		 * however, some integrated adapters may have 0xffff as
+		 * their id and still be valid. Examples are on-board
+		 * VGA of the 55sx, the integrated SCSI of the 56 & 57,
+		 * and possibly also the 95 ULTIMEDIA.
+		 */
+
+		mca_dev->status = MCA_ADAPTER_NORMAL;
+	}
+
+	if((mca_dev->pos_id == 0xffff ||
+	    mca_dev->pos_id == 0x0000) && mca_dev->slot >= MCA_MAX_SLOT_NR) {
+		int j;
+
+		for(j = 2; j < 8; j++) {
+			if(mca_dev->pos[j] != 0xff) {
+				mca_dev->status = MCA_ADAPTER_NORMAL;
+				break;
+			}
+		}
+	}
+
+	if(!(mca_dev->pos[2] & MCA_ENABLED)) {
+
+		/* enabled bit is in POS 2 */
+
+		mca_dev->status = MCA_ADAPTER_DISABLED;
+	}
+} /* mca_configure_adapter_status */
+
+/*--------------------------------------------------------------------*/
+
+static struct resource mca_standard_resources[] = {
+	{ .start = 0x60, .end = 0x60, .name = "system control port B (MCA)" },
+	{ .start = 0x90, .end = 0x90, .name = "arbitration (MCA)" },
+	{ .start = 0x91, .end = 0x91, .name = "card Select Feedback (MCA)" },
+	{ .start = 0x92, .end = 0x92, .name = "system Control port A (MCA)" },
+	{ .start = 0x94, .end = 0x94, .name = "system board setup (MCA)" },
+	{ .start = 0x96, .end = 0x97, .name = "POS (MCA)" },
+	{ .start = 0x100, .end = 0x107, .name = "POS (MCA)" }
+};
+
+#define MCA_STANDARD_RESOURCES	ARRAY_SIZE(mca_standard_resources)
+
+/**
+ *	mca_read_and_store_pos - read the POS registers into a memory buffer
+ *      @pos: a char pointer to 8 bytes, contains the POS register value on
+ *            successful return
+ *
+ *	Returns 1 if a card actually exists (i.e. the pos isn't
+ *	all 0xff) or 0 otherwise
+ */
+static int mca_read_and_store_pos(unsigned char *pos) {
+	int j;
+	int found = 0;
+
+	for(j=0; j<8; j++) {
+		if((pos[j] = inb_p(MCA_POS_REG(j))) != 0xff) {
+			/* 0xff all across means no device. 0x00 means
+			 * something's broken, but a device is
+			 * probably there.  However, if you get 0x00
+			 * from a motherboard register it won't matter
+			 * what we find.  For the record, on the
+			 * 57SLC, the integrated SCSI adapter has
+			 * 0xffff for the adapter ID, but nonzero for
+			 * other registers.  */
+
+			found = 1;
+		}
+	}
+	return found;
+}
+
+static unsigned char mca_pc_read_pos(struct mca_device *mca_dev, int reg)
+{
+	unsigned char byte;
+	unsigned long flags;
+
+	if(reg < 0 || reg >= 8)
+		return 0;
+
+	spin_lock_irqsave(&mca_lock, flags);
+	if(mca_dev->pos_register) {
+		/* Disable adapter setup, enable motherboard setup */
+
+		outb_p(0, MCA_ADAPTER_SETUP_REG);
+		outb_p(mca_dev->pos_register, MCA_MOTHERBOARD_SETUP_REG);
+
+		byte = inb_p(MCA_POS_REG(reg));
+		outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG);
+	} else {
+
+		/* Make sure motherboard setup is off */
+
+		outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG);
+
+		/* Read the appropriate register */
+
+		outb_p(0x8|(mca_dev->slot & 0xf), MCA_ADAPTER_SETUP_REG);
+		byte = inb_p(MCA_POS_REG(reg));
+		outb_p(0, MCA_ADAPTER_SETUP_REG);
+	}
+	spin_unlock_irqrestore(&mca_lock, flags);
+
+	mca_dev->pos[reg] = byte;
+
+	return byte;
+}
+
+static void mca_pc_write_pos(struct mca_device *mca_dev, int reg,
+			     unsigned char byte)
+{
+	unsigned long flags;
+
+	if(reg < 0 || reg >= 8)
+		return;
+
+	spin_lock_irqsave(&mca_lock, flags);
+
+	/* Make sure motherboard setup is off */
+
+	outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG);
+
+	/* Read in the appropriate register */
+
+	outb_p(0x8|(mca_dev->slot&0xf), MCA_ADAPTER_SETUP_REG);
+	outb_p(byte, MCA_POS_REG(reg));
+	outb_p(0, MCA_ADAPTER_SETUP_REG);
+
+	spin_unlock_irqrestore(&mca_lock, flags);
+
+	/* Update the global register list, while we have the byte */
+
+	mca_dev->pos[reg] = byte;
+
+}
+
+/* for the primary MCA bus, we have identity transforms */
+static int mca_dummy_transform_irq(struct mca_device * mca_dev, int irq)
+{
+	return irq;
+}
+
+static int mca_dummy_transform_ioport(struct mca_device * mca_dev, int port)
+{
+	return port;
+}
+
+static void *mca_dummy_transform_memory(struct mca_device * mca_dev, void *mem)
+{
+	return mem;
+}
+
+
+static int __init mca_init(void)
+{
+	unsigned int i, j;
+	struct mca_device *mca_dev;
+	unsigned char pos[8];
+	short mca_builtin_scsi_ports[] = {0xf7, 0xfd, 0x00};
+	struct mca_bus *bus;
+
+	/* WARNING: Be careful when making changes here. Putting an adapter
+	 * and the motherboard simultaneously into setup mode may result in
+	 * damage to chips (according to The Indispensible PC Hardware Book
+	 * by Hans-Peter Messmer). Also, we disable system interrupts (so
+	 * that we are not disturbed in the middle of this).
+	 */
+
+	/* Make sure the MCA bus is present */
+
+	if (mca_system_init()) {
+		printk(KERN_ERR "MCA bus system initialisation failed\n");
+		return -ENODEV;
+	}
+
+	if (!MCA_bus)
+		return -ENODEV;
+
+	printk(KERN_INFO "Micro Channel bus detected.\n");
+
+	/* All MCA systems have at least a primary bus */
+	bus = mca_attach_bus(MCA_PRIMARY_BUS);
+	if (!bus)
+		goto out_nomem;
+	bus->default_dma_mask = 0xffffffffLL;
+	bus->f.mca_write_pos = mca_pc_write_pos;
+	bus->f.mca_read_pos = mca_pc_read_pos;
+	bus->f.mca_transform_irq = mca_dummy_transform_irq;
+	bus->f.mca_transform_ioport = mca_dummy_transform_ioport;
+	bus->f.mca_transform_memory = mca_dummy_transform_memory;
+
+	/* get the motherboard device */
+	mca_dev = kzalloc(sizeof(struct mca_device), GFP_KERNEL);
+	if(unlikely(!mca_dev))
+		goto out_nomem;
+
+	/*
+	 * We do not expect many MCA interrupts during initialization,
+	 * but let us be safe:
+	 */
+	spin_lock_irq(&mca_lock);
+
+	/* Make sure adapter setup is off */
+
+	outb_p(0, MCA_ADAPTER_SETUP_REG);
+
+	/* Read motherboard POS registers */
+
+	mca_dev->pos_register = 0x7f;
+	outb_p(mca_dev->pos_register, MCA_MOTHERBOARD_SETUP_REG);
+	mca_dev->name[0] = 0;
+	mca_read_and_store_pos(mca_dev->pos);
+	mca_configure_adapter_status(mca_dev);
+	/* fake POS and slot for a motherboard */
+	mca_dev->pos_id = MCA_MOTHERBOARD_POS;
+	mca_dev->slot = MCA_MOTHERBOARD;
+	mca_register_device(MCA_PRIMARY_BUS, mca_dev);
+
+	mca_dev = kzalloc(sizeof(struct mca_device), GFP_ATOMIC);
+	if(unlikely(!mca_dev))
+		goto out_unlock_nomem;
+
+	/* Put motherboard into video setup mode, read integrated video
+	 * POS registers, and turn motherboard setup off.
+	 */
+
+	mca_dev->pos_register = 0xdf;
+	outb_p(mca_dev->pos_register, MCA_MOTHERBOARD_SETUP_REG);
+	mca_dev->name[0] = 0;
+	mca_read_and_store_pos(mca_dev->pos);
+	mca_configure_adapter_status(mca_dev);
+	/* fake POS and slot for the integrated video */
+	mca_dev->pos_id = MCA_INTEGVIDEO_POS;
+	mca_dev->slot = MCA_INTEGVIDEO;
+	mca_register_device(MCA_PRIMARY_BUS, mca_dev);
+
+	/* Put motherboard into scsi setup mode, read integrated scsi
+	 * POS registers, and turn motherboard setup off.
+	 *
+	 * It seems there are two possible SCSI registers. Martin says that
+	 * for the 56,57, 0xf7 is the one, but fails on the 76.
+	 * Alfredo (apena@vnet.ibm.com) says
+	 * 0xfd works on his machine. We'll try both of them. I figure it's
+	 * a good bet that only one could be valid at a time. This could
+	 * screw up though if one is used for something else on the other
+	 * machine.
+	 */
+
+	for(i = 0; (which_scsi = mca_builtin_scsi_ports[i]) != 0; i++) {
+		outb_p(which_scsi, MCA_MOTHERBOARD_SETUP_REG);
+		if(mca_read_and_store_pos(pos))
+			break;
+	}
+	if(which_scsi) {
+		/* found a scsi card */
+		mca_dev = kzalloc(sizeof(struct mca_device), GFP_ATOMIC);
+		if(unlikely(!mca_dev))
+			goto out_unlock_nomem;
+
+		for(j = 0; j < 8; j++)
+			mca_dev->pos[j] = pos[j];
+
+		mca_configure_adapter_status(mca_dev);
+		/* fake POS and slot for integrated SCSI controller */
+		mca_dev->pos_id = MCA_INTEGSCSI_POS;
+		mca_dev->slot = MCA_INTEGSCSI;
+		mca_dev->pos_register = which_scsi;
+		mca_register_device(MCA_PRIMARY_BUS, mca_dev);
+	}
+
+	/* Turn off motherboard setup */
+
+	outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG);
+
+	/* Now loop over MCA slots: put each adapter into setup mode, and
+	 * read its POS registers. Then put adapter setup off.
+	 */
+
+	for(i=0; i<MCA_MAX_SLOT_NR; i++) {
+		outb_p(0x8|(i&0xf), MCA_ADAPTER_SETUP_REG);
+		if(!mca_read_and_store_pos(pos))
+			continue;
+
+		mca_dev = kzalloc(sizeof(struct mca_device), GFP_ATOMIC);
+		if(unlikely(!mca_dev))
+			goto out_unlock_nomem;
+
+		for(j=0; j<8; j++)
+			mca_dev->pos[j]=pos[j];
+
+		mca_dev->driver_loaded = 0;
+		mca_dev->slot = i;
+		mca_dev->pos_register = 0;
+		mca_configure_adapter_status(mca_dev);
+		mca_register_device(MCA_PRIMARY_BUS, mca_dev);
+	}
+	outb_p(0, MCA_ADAPTER_SETUP_REG);
+
+	/* Enable interrupts and return memory start */
+	spin_unlock_irq(&mca_lock);
+
+	for (i = 0; i < MCA_STANDARD_RESOURCES; i++)
+		request_resource(&ioport_resource, mca_standard_resources + i);
+
+	mca_do_proc_init();
+
+	return 0;
+
+ out_unlock_nomem:
+	spin_unlock_irq(&mca_lock);
+ out_nomem:
+	printk(KERN_EMERG "Failed memory allocation in MCA setup!\n");
+	return -ENOMEM;
+}
+
+subsys_initcall(mca_init);
+
+/*--------------------------------------------------------------------*/
+
+static __kprobes void
+mca_handle_nmi_device(struct mca_device *mca_dev, int check_flag)
+{
+	int slot = mca_dev->slot;
+
+	if(slot == MCA_INTEGSCSI) {
+		printk(KERN_CRIT "NMI: caused by MCA integrated SCSI adapter (%s)\n",
+			mca_dev->name);
+	} else if(slot == MCA_INTEGVIDEO) {
+		printk(KERN_CRIT "NMI: caused by MCA integrated video adapter (%s)\n",
+			mca_dev->name);
+	} else if(slot == MCA_MOTHERBOARD) {
+		printk(KERN_CRIT "NMI: caused by motherboard (%s)\n",
+			mca_dev->name);
+	}
+
+	/* More info available in POS 6 and 7? */
+
+	if(check_flag) {
+		unsigned char pos6, pos7;
+
+		pos6 = mca_device_read_pos(mca_dev, 6);
+		pos7 = mca_device_read_pos(mca_dev, 7);
+
+		printk(KERN_CRIT "NMI: POS 6 = 0x%x, POS 7 = 0x%x\n", pos6, pos7);
+	}
+
+} /* mca_handle_nmi_slot */
+
+/*--------------------------------------------------------------------*/
+
+static int __kprobes mca_handle_nmi_callback(struct device *dev, void *data)
+{
+	struct mca_device *mca_dev = to_mca_device(dev);
+	unsigned char pos5;
+
+	pos5 = mca_device_read_pos(mca_dev, 5);
+
+	if(!(pos5 & 0x80)) {
+		/* Bit 7 of POS 5 is reset when this adapter has a hardware
+		 * error. Bit 7 it reset if there's error information
+		 * available in POS 6 and 7.
+		 */
+		mca_handle_nmi_device(mca_dev, !(pos5 & 0x40));
+		return 1;
+	}
+	return 0;
+}
+
+void __kprobes mca_handle_nmi(void)
+{
+	/* First try - scan the various adapters and see if a specific
+	 * adapter was responsible for the error.
+	 */
+	bus_for_each_dev(&mca_bus_type, NULL, NULL, mca_handle_nmi_callback);
+
+	mca_nmi_hook();
+} /* mca_handle_nmi */