cciss: add cciss_tape_cmds module paramter

This is to allow number of commands reserved for use by SCSI tape drives
and medium changers to be adjusted at driver load time via the kernel
parameter cciss_tape_cmds, with a default value of 6, and a range
of 2 - 16 inclusive.  Previously, the driver limited the number of
commands which could be queued to the SCSI half of the the driver
to only 2.  This is to fix the problem that if you had more than
two tape drives, you couldn't, for example, erase or rewind them all
at the same time.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

3 files changed, 33 insertions, 23 deletions

diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 9528e94dc8b2..abe90c973540 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -64,6 +64,10 @@ MODULE_DESCRIPTION("Driver for HP Smart Array Controllers");
 MODULE_SUPPORTED_DEVICE("HP Smart Array Controllers");
 MODULE_VERSION("3.6.26");
 MODULE_LICENSE("GPL");
+static int cciss_tape_cmds = 6;
+module_param(cciss_tape_cmds, int, 0644);
+MODULE_PARM_DESC(cciss_tape_cmds,
+	"number of commands to allocate for tape devices (default: 6)");
 
 static DEFINE_MUTEX(cciss_mutex);
 static struct proc_dir_entry *proc_cciss;
@@ -4221,7 +4225,7 @@ static void __devinit cciss_get_max_perf_mode_cmds(struct ctlr_info *h)
 static void __devinit cciss_find_board_params(ctlr_info_t *h)
 {
 	cciss_get_max_perf_mode_cmds(h);
-	h->nr_cmds = h->max_commands - 4; /* Allow room for some ioctls */
+	h->nr_cmds = h->max_commands - 4 - cciss_tape_cmds;
 	h->maxsgentries = readl(&(h->cfgtable->MaxSGElements));
 	/*
 	 * Limit in-command s/g elements to 32 save dma'able memory.
@@ -4959,6 +4963,11 @@ reinit_after_soft_reset:
 	sprintf(h->devname, "cciss%d", i);
 	h->ctlr = i;
 
+	if (cciss_tape_cmds < 2)
+		cciss_tape_cmds = 2;
+	if (cciss_tape_cmds > 16)
+		cciss_tape_cmds = 16;
+
 	init_completion(&h->scan_wait);
 
 	if (cciss_create_hba_sysfs_entry(h))
diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c
index df793803f5ae..696100241a6f 100644
--- a/drivers/block/cciss_scsi.c
+++ b/drivers/block/cciss_scsi.c
@@ -84,7 +84,6 @@ static struct scsi_host_template cciss_driver_template = {
 	.proc_name		= "cciss",
 	.proc_info		= cciss_scsi_proc_info,
 	.queuecommand		= cciss_scsi_queue_command,
-	.can_queue		= SCSI_CCISS_CAN_QUEUE,
 	.this_id		= 7,
 	.cmd_per_lun		= 1,
 	.use_clustering		= DISABLE_CLUSTERING,
@@ -108,16 +107,13 @@ struct cciss_scsi_cmd_stack_elem_t {
 
 #pragma pack()
 
-#define CMD_STACK_SIZE (SCSI_CCISS_CAN_QUEUE * \
-		CCISS_MAX_SCSI_DEVS_PER_HBA + 2)
-			// plus two for init time usage
-
 #pragma pack(1)
 struct cciss_scsi_cmd_stack_t {
 	struct cciss_scsi_cmd_stack_elem_t *pool;
-	struct cciss_scsi_cmd_stack_elem_t *elem[CMD_STACK_SIZE];
+	struct cciss_scsi_cmd_stack_elem_t **elem;
 	dma_addr_t cmd_pool_handle;
 	int top;
+	int nelems;
 };
 #pragma pack()
 
@@ -191,7 +187,7 @@ scsi_cmd_free(ctlr_info_t *h, CommandList_struct *c)
 	sa = h->scsi_ctlr;
 	stk = &sa->cmd_stack; 
 	stk->top++;
-	if (stk->top >= CMD_STACK_SIZE) {
+	if (stk->top >= stk->nelems) {
 		dev_err(&h->pdev->dev,
 			"scsi_cmd_free called too many times.\n");
 		BUG();
@@ -206,13 +202,14 @@ scsi_cmd_stack_setup(ctlr_info_t *h, struct cciss_scsi_adapter_data_t *sa)
 	struct cciss_scsi_cmd_stack_t *stk;
 	size_t size;
 
+	stk = &sa->cmd_stack;
+	stk->nelems = cciss_tape_cmds + 2;
 	sa->cmd_sg_list = cciss_allocate_sg_chain_blocks(h,
-		h->chainsize, CMD_STACK_SIZE);
+		h->chainsize, stk->nelems);
 	if (!sa->cmd_sg_list && h->chainsize > 0)
 		return -ENOMEM;
 
-	stk = &sa->cmd_stack; 
-	size = sizeof(struct cciss_scsi_cmd_stack_elem_t) * CMD_STACK_SIZE;
+	size = sizeof(struct cciss_scsi_cmd_stack_elem_t) * stk->nelems;
 
 	/* Check alignment, see cciss_cmd.h near CommandList_struct def. */
 	BUILD_BUG_ON((sizeof(*stk->pool) % COMMANDLIST_ALIGNMENT) != 0);
@@ -221,18 +218,23 @@ scsi_cmd_stack_setup(ctlr_info_t *h, struct cciss_scsi_adapter_data_t *sa)
 		pci_alloc_consistent(h->pdev, size, &stk->cmd_pool_handle);
 
 	if (stk->pool == NULL) {
-		cciss_free_sg_chain_blocks(sa->cmd_sg_list, CMD_STACK_SIZE);
+		cciss_free_sg_chain_blocks(sa->cmd_sg_list, stk->nelems);
 		sa->cmd_sg_list = NULL;
 		return -ENOMEM;
 	}
-
-	for (i=0; i<CMD_STACK_SIZE; i++) {
+	stk->elem = kmalloc(sizeof(stk->elem[0]) * stk->nelems, GFP_KERNEL);
+	if (!stk->elem) {
+		pci_free_consistent(h->pdev, size, stk->pool,
+		stk->cmd_pool_handle);
+		return -1;
+	}
+	for (i = 0; i < stk->nelems; i++) {
 		stk->elem[i] = &stk->pool[i];
 		stk->elem[i]->busaddr = (__u32) (stk->cmd_pool_handle + 
 			(sizeof(struct cciss_scsi_cmd_stack_elem_t) * i));
 		stk->elem[i]->cmdindex = i;
 	}
-	stk->top = CMD_STACK_SIZE-1;
+	stk->top = stk->nelems-1;
 	return 0;
 }
 
@@ -245,16 +247,18 @@ scsi_cmd_stack_free(ctlr_info_t *h)
 
 	sa = h->scsi_ctlr;
 	stk = &sa->cmd_stack; 
-	if (stk->top != CMD_STACK_SIZE-1) {
+	if (stk->top != stk->nelems-1) {
 		dev_warn(&h->pdev->dev,
 			"bug: %d scsi commands are still outstanding.\n",
-			CMD_STACK_SIZE - stk->top);
+			stk->nelems - stk->top);
 	}
-	size = sizeof(struct cciss_scsi_cmd_stack_elem_t) * CMD_STACK_SIZE;
+	size = sizeof(struct cciss_scsi_cmd_stack_elem_t) * stk->nelems;
 
 	pci_free_consistent(h->pdev, size, stk->pool, stk->cmd_pool_handle);
 	stk->pool = NULL;
-	cciss_free_sg_chain_blocks(sa->cmd_sg_list, CMD_STACK_SIZE);
+	cciss_free_sg_chain_blocks(sa->cmd_sg_list, stk->nelems);
+	kfree(stk->elem);
+	stk->elem = NULL;
 }
 
 #if 0
@@ -859,6 +863,7 @@ cciss_scsi_detect(ctlr_info_t *h)
 	sh->io_port = 0;	// good enough?  FIXME, 
 	sh->n_io_port = 0;	// I don't think we use these two...
 	sh->this_id = SELF_SCSI_ID;  
+	sh->can_queue = cciss_tape_cmds;
 	sh->sg_tablesize = h->maxsgentries;
 	sh->max_cmd_len = MAX_COMMAND_SIZE;
 
diff --git a/drivers/block/cciss_scsi.h b/drivers/block/cciss_scsi.h
index 6d5822fe851a..e71d986727ca 100644
--- a/drivers/block/cciss_scsi.h
+++ b/drivers/block/cciss_scsi.h
@@ -36,13 +36,9 @@
 		   addressible natively, and may in fact turn
 		   out to be not scsi at all. */
 
-#define SCSI_CCISS_CAN_QUEUE 2
 
 /* 
 
-Note, cmd_per_lun could give us some trouble, so I'm setting it very low.
-Likewise, SCSI_CCISS_CAN_QUEUE is set very conservatively.
-
 If the upper scsi layer tries to track how many commands we have 
 outstanding, it will be operating under the misapprehension that it is
 the only one sending us requests.  We also have the block interface,