Merge branch 'origin' into devel

Conflicts:
	sound/soc/pxa/pxa2xx-i2s.c

5 files changed, 151 insertions, 140 deletions

diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig
index 01936368b8b0..f13a05285a9d 100644
--- a/arch/sh/drivers/dma/Kconfig
+++ b/arch/sh/drivers/dma/Kconfig
@@ -9,13 +9,21 @@ config SH_DMA
 	select SH_DMA_API
 	default n
 
+config SH_DMA_IRQ_MULTI
+	bool
+	depends on SH_DMA
+	default y if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7751 || \
+		CPU_SUBTYPE_SH7750S || CPU_SUBTYPE_SH7750R || CPU_SUBTYPE_SH7751R || \
+		CPU_SUBTYPE_SH7091 || CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7764 || \
+		CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
+
 config NR_ONCHIP_DMA_CHANNELS
 	int
 	depends on SH_DMA
-	default "6" if CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721
-	default "8" if CPU_SUBTYPE_SH7750R || CPU_SUBTYPE_SH7751R
-	default "12" if CPU_SUBTYPE_SH7780
-	default "4"
+	default "4" if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7750S
+	default "8" if CPU_SUBTYPE_SH7750R || CPU_SUBTYPE_SH7751R || CPU_SUBTYPE_SH7760
+	default "12" if CPU_SUBTYPE_SH7723 || CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
+	default "6"
 	help
 	  This allows you to specify the number of channels that the on-chip
 	  DMAC supports. This will be 4 for SH7750/SH7751 and 8 for the
@@ -46,4 +54,28 @@ config SH_DMABRG
 	  of the SH7760.
 	  Say Y if you want to use Audio/USB DMA on your SH7760 board.
 
+config PVR2_DMA
+	tristate "PowerVR 2 DMAC support"
+	depends on SH_DREAMCAST && SH_DMA
+	help
+	  Selecting this will enable support for the PVR2 DMA controller.
+	  As this chains off of the on-chip DMAC, that must also be
+	  enabled by default.
+
+	  This is primarily used by the pvr2fb framebuffer driver for
+	  certain optimizations, but is not necessary for functionality.
+
+	  If in doubt, say N.
+
+config G2_DMA
+	tristate "G2 Bus DMA support"
+	depends on SH_DREAMCAST
+	select SH_DMA_API
+	help
+	  This enables support for the DMA controller for the Dreamcast's
+	  G2 bus. Drivers that want this will generally enable this on
+	  their own.
+
+	  If in doubt, say N.
+
 endmenu
diff --git a/arch/sh/drivers/dma/Makefile b/arch/sh/drivers/dma/Makefile
index ab956adacb47..c6068137b46f 100644
--- a/arch/sh/drivers/dma/Makefile
+++ b/arch/sh/drivers/dma/Makefile
@@ -4,5 +4,6 @@
 
 obj-$(CONFIG_SH_DMA_API)	+= dma-api.o dma-sysfs.o
 obj-$(CONFIG_SH_DMA)		+= dma-sh.o
-obj-$(CONFIG_SH_DREAMCAST)	+= dma-pvr2.o dma-g2.o
+obj-$(CONFIG_PVR2_DMA)		+= dma-pvr2.o
+obj-$(CONFIG_G2_DMA)		+= dma-g2.o
 obj-$(CONFIG_SH_DMABRG)		+= dmabrg.o
diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c
index 50887a592dd0..37fb5b8bbc3f 100644
--- a/arch/sh/drivers/dma/dma-sh.c
+++ b/arch/sh/drivers/dma/dma-sh.c
@@ -17,28 +17,16 @@
 #include <mach-dreamcast/mach/dma.h>
 #include <asm/dma.h>
 #include <asm/io.h>
-#include "dma-sh.h"
-
-static int dmte_irq_map[] = {
-	DMTE0_IRQ,
-	DMTE1_IRQ,
-	DMTE2_IRQ,
-	DMTE3_IRQ,
-#if defined(CONFIG_CPU_SUBTYPE_SH7720)  ||	\
-    defined(CONFIG_CPU_SUBTYPE_SH7721)  ||	\
-    defined(CONFIG_CPU_SUBTYPE_SH7751R) ||	\
-    defined(CONFIG_CPU_SUBTYPE_SH7760)  ||	\
-    defined(CONFIG_CPU_SUBTYPE_SH7709)  ||	\
-    defined(CONFIG_CPU_SUBTYPE_SH7780)
-	DMTE4_IRQ,
-	DMTE5_IRQ,
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7751R) ||	\
-    defined(CONFIG_CPU_SUBTYPE_SH7760)  ||	\
-    defined(CONFIG_CPU_SUBTYPE_SH7780)
-	DMTE6_IRQ,
-	DMTE7_IRQ,
+#include <asm/dma-sh.h>
+
+#if defined(DMAE1_IRQ)
+#define NR_DMAE		2
+#else
+#define NR_DMAE		1
 #endif
+
+static const char *dmae_name[] = {
+	"DMAC Address Error0", "DMAC Address Error1"
 };
 
 static inline unsigned int get_dmte_irq(unsigned int chan)
@@ -46,7 +34,14 @@ static inline unsigned int get_dmte_irq(unsigned int chan)
 	unsigned int irq = 0;
 	if (chan < ARRAY_SIZE(dmte_irq_map))
 		irq = dmte_irq_map[chan];
+
+#if defined(CONFIG_SH_DMA_IRQ_MULTI)
+	if (irq > DMTE6_IRQ)
+		return DMTE6_IRQ;
+	return DMTE0_IRQ;
+#else
 	return irq;
+#endif
 }
 
 /*
@@ -59,7 +54,7 @@ static inline unsigned int get_dmte_irq(unsigned int chan)
  */
 static inline unsigned int calc_xmit_shift(struct dma_channel *chan)
 {
-	u32 chcr = ctrl_inl(CHCR[chan->chan]);
+	u32 chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR);
 
 	return ts_shift[(chcr & CHCR_TS_MASK)>>CHCR_TS_SHIFT];
 }
@@ -75,13 +70,13 @@ static irqreturn_t dma_tei(int irq, void *dev_id)
 	struct dma_channel *chan = dev_id;
 	u32 chcr;
 
-	chcr = ctrl_inl(CHCR[chan->chan]);
+	chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR);
 
 	if (!(chcr & CHCR_TE))
 		return IRQ_NONE;
 
 	chcr &= ~(CHCR_IE | CHCR_DE);
-	ctrl_outl(chcr, CHCR[chan->chan]);
+	ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR));
 
 	wake_up(&chan->wait_queue);
 
@@ -94,7 +89,12 @@ static int sh_dmac_request_dma(struct dma_channel *chan)
 		return 0;
 
 	return request_irq(get_dmte_irq(chan->chan), dma_tei,
-			   IRQF_DISABLED, chan->dev_id, chan);
+#if defined(CONFIG_SH_DMA_IRQ_MULTI)
+				IRQF_SHARED,
+#else
+				IRQF_DISABLED,
+#endif
+				chan->dev_id, chan);
 }
 
 static void sh_dmac_free_dma(struct dma_channel *chan)
@@ -115,7 +115,7 @@ sh_dmac_configure_channel(struct dma_channel *chan, unsigned long chcr)
 		chan->flags &= ~DMA_TEI_CAPABLE;
 	}
 
-	ctrl_outl(chcr, CHCR[chan->chan]);
+	ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR));
 
 	chan->flags |= DMA_CONFIGURED;
 	return 0;
@@ -126,13 +126,13 @@ static void sh_dmac_enable_dma(struct dma_channel *chan)
 	int irq;
 	u32 chcr;
 
-	chcr = ctrl_inl(CHCR[chan->chan]);
+	chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR);
 	chcr |= CHCR_DE;
 
 	if (chan->flags & DMA_TEI_CAPABLE)
 		chcr |= CHCR_IE;
 
-	ctrl_outl(chcr, CHCR[chan->chan]);
+	ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR));
 
 	if (chan->flags & DMA_TEI_CAPABLE) {
 		irq = get_dmte_irq(chan->chan);
@@ -150,9 +150,9 @@ static void sh_dmac_disable_dma(struct dma_channel *chan)
 		disable_irq(irq);
 	}
 
-	chcr = ctrl_inl(CHCR[chan->chan]);
+	chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR);
 	chcr &= ~(CHCR_DE | CHCR_TE | CHCR_IE);
-	ctrl_outl(chcr, CHCR[chan->chan]);
+	ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR));
 }
 
 static int sh_dmac_xfer_dma(struct dma_channel *chan)
@@ -183,12 +183,13 @@ static int sh_dmac_xfer_dma(struct dma_channel *chan)
 	 */
 	if (chan->sar || (mach_is_dreamcast() &&
 			  chan->chan == PVR2_CASCADE_CHAN))
-		ctrl_outl(chan->sar, SAR[chan->chan]);
+		ctrl_outl(chan->sar, (dma_base_addr[chan->chan]+SAR));
 	if (chan->dar || (mach_is_dreamcast() &&
 			  chan->chan == PVR2_CASCADE_CHAN))
-		ctrl_outl(chan->dar, DAR[chan->chan]);
+		ctrl_outl(chan->dar, (dma_base_addr[chan->chan] + DAR));
 
-	ctrl_outl(chan->count >> calc_xmit_shift(chan), DMATCR[chan->chan]);
+	ctrl_outl(chan->count >> calc_xmit_shift(chan),
+		(dma_base_addr[chan->chan] + TCR));
 
 	sh_dmac_enable_dma(chan);
 
@@ -197,36 +198,26 @@ static int sh_dmac_xfer_dma(struct dma_channel *chan)
 
 static int sh_dmac_get_dma_residue(struct dma_channel *chan)
 {
-	if (!(ctrl_inl(CHCR[chan->chan]) & CHCR_DE))
+	if (!(ctrl_inl(dma_base_addr[chan->chan] + CHCR) & CHCR_DE))
 		return 0;
 
-	return ctrl_inl(DMATCR[chan->chan]) << calc_xmit_shift(chan);
+	return ctrl_inl(dma_base_addr[chan->chan] + TCR)
+		 << calc_xmit_shift(chan);
 }
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7721) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7780) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7709)
-#define dmaor_read_reg()	ctrl_inw(DMAOR)
-#define dmaor_write_reg(data)	ctrl_outw(data, DMAOR)
-#else
-#define dmaor_read_reg()	ctrl_inl(DMAOR)
-#define dmaor_write_reg(data)	ctrl_outl(data, DMAOR)
-#endif
-
-static inline int dmaor_reset(void)
+static inline int dmaor_reset(int no)
 {
-	unsigned long dmaor = dmaor_read_reg();
+	unsigned long dmaor = dmaor_read_reg(no);
 
 	/* Try to clear the error flags first, incase they are set */
 	dmaor &= ~(DMAOR_NMIF | DMAOR_AE);
-	dmaor_write_reg(dmaor);
+	dmaor_write_reg(no, dmaor);
 
 	dmaor |= DMAOR_INIT;
-	dmaor_write_reg(dmaor);
+	dmaor_write_reg(no, dmaor);
 
 	/* See if we got an error again */
-	if ((dmaor_read_reg() & (DMAOR_AE | DMAOR_NMIF))) {
+	if ((dmaor_read_reg(no) & (DMAOR_AE | DMAOR_NMIF))) {
 		printk(KERN_ERR "dma-sh: Can't initialize DMAOR.\n");
 		return -EINVAL;
 	}
@@ -237,10 +228,33 @@ static inline int dmaor_reset(void)
 #if defined(CONFIG_CPU_SH4)
 static irqreturn_t dma_err(int irq, void *dummy)
 {
-	dmaor_reset();
+#if defined(CONFIG_SH_DMA_IRQ_MULTI)
+	int cnt = 0;
+	switch (irq) {
+#if defined(DMTE6_IRQ) && defined(DMAE1_IRQ)
+	case DMTE6_IRQ:
+		cnt++;
+#endif
+	case DMTE0_IRQ:
+		if (dmaor_read_reg(cnt) & (DMAOR_NMIF | DMAOR_AE)) {
+			disable_irq(irq);
+			/* DMA multi and error IRQ */
+			return IRQ_HANDLED;
+		}
+	default:
+		return IRQ_NONE;
+	}
+#else
+	dmaor_reset(0);
+#if defined(CONFIG_CPU_SUBTYPE_SH7723)	|| \
+		defined(CONFIG_CPU_SUBTYPE_SH7780)	|| \
+		defined(CONFIG_CPU_SUBTYPE_SH7785)
+	dmaor_reset(1);
+#endif
 	disable_irq(irq);
 
 	return IRQ_HANDLED;
+#endif
 }
 #endif
 
@@ -259,24 +273,59 @@ static struct dma_info sh_dmac_info = {
 	.flags		= DMAC_CHANNELS_TEI_CAPABLE,
 };
 
+#ifdef CONFIG_CPU_SH4
+static unsigned int get_dma_error_irq(int n)
+{
+#if defined(CONFIG_SH_DMA_IRQ_MULTI)
+	return (n == 0) ? get_dmte_irq(0) : get_dmte_irq(6);
+#else
+	return (n == 0) ? DMAE0_IRQ :
+#if defined(DMAE1_IRQ)
+				DMAE1_IRQ;
+#else
+				-1;
+#endif
+#endif
+}
+#endif
+
 static int __init sh_dmac_init(void)
 {
 	struct dma_info *info = &sh_dmac_info;
 	int i;
 
 #ifdef CONFIG_CPU_SH4
-	i = request_irq(DMAE_IRQ, dma_err, IRQF_DISABLED, "DMAC Address Error", 0);
-	if (unlikely(i < 0))
-		return i;
+	int n;
+
+	for (n = 0; n < NR_DMAE; n++) {
+		i = request_irq(get_dma_error_irq(n), dma_err,
+#if defined(CONFIG_SH_DMA_IRQ_MULTI)
+				IRQF_SHARED,
+#else
+				IRQF_DISABLED,
 #endif
+				dmae_name[n], (void *)dmae_name[n]);
+		if (unlikely(i < 0)) {
+			printk(KERN_ERR "%s request_irq fail\n", dmae_name[n]);
+			return i;
+		}
+	}
+#endif /* CONFIG_CPU_SH4 */
 
 	/*
 	 * Initialize DMAOR, and clean up any error flags that may have
 	 * been set.
 	 */
-	i = dmaor_reset();
+	i = dmaor_reset(0);
+	if (unlikely(i != 0))
+		return i;
+#if defined(CONFIG_CPU_SUBTYPE_SH7723)	|| \
+		defined(CONFIG_CPU_SUBTYPE_SH7780)	|| \
+		defined(CONFIG_CPU_SUBTYPE_SH7785)
+	i = dmaor_reset(1);
 	if (unlikely(i != 0))
 		return i;
+#endif
 
 	return register_dmac(info);
 }
@@ -284,8 +333,12 @@ static int __init sh_dmac_init(void)
 static void __exit sh_dmac_exit(void)
 {
 #ifdef CONFIG_CPU_SH4
-	free_irq(DMAE_IRQ, 0);
-#endif
+	int n;
+
+	for (n = 0; n < NR_DMAE; n++) {
+		free_irq(get_dma_error_irq(n), (void *)dmae_name[n]);
+	}
+#endif /* CONFIG_CPU_SH4 */
 	unregister_dmac(&sh_dmac_info);
 }
 
diff --git a/arch/sh/drivers/dma/dma-sh.h b/arch/sh/drivers/dma/dma-sh.h
deleted file mode 100644
index 05fecd5428e4..000000000000
--- a/arch/sh/drivers/dma/dma-sh.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * arch/sh/drivers/dma/dma-sh.h
- *
- * Copyright (C) 2000  Takashi YOSHII
- * Copyright (C) 2003  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __DMA_SH_H
-#define __DMA_SH_H
-
-#include <cpu/dma.h>
-
-/* Definitions for the SuperH DMAC */
-#define REQ_L	0x00000000
-#define REQ_E	0x00080000
-#define RACK_H	0x00000000
-#define RACK_L	0x00040000
-#define ACK_R	0x00000000
-#define ACK_W	0x00020000
-#define ACK_H	0x00000000
-#define ACK_L	0x00010000
-#define DM_INC	0x00004000
-#define DM_DEC	0x00008000
-#define SM_INC	0x00001000
-#define SM_DEC	0x00002000
-#define RS_IN	0x00000200
-#define RS_OUT	0x00000300
-#define TS_BLK	0x00000040
-#define TM_BUR	0x00000020
-#define CHCR_DE 0x00000001
-#define CHCR_TE 0x00000002
-#define CHCR_IE 0x00000004
-
-/* DMAOR definitions */
-#define DMAOR_AE	0x00000004
-#define DMAOR_NMIF	0x00000002
-#define DMAOR_DME	0x00000001
-
-/*
- * Define the default configuration for dual address memory-memory transfer.
- * The 0x400 value represents auto-request, external->external.
- */
-#define RS_DUAL	(DM_INC | SM_INC | 0x400 | TS_32)
-
-#define MAX_DMAC_CHANNELS	(CONFIG_NR_ONCHIP_DMA_CHANNELS)
-
-/*
- * Subtypes that have fewer channels than this simply need to change
- * CONFIG_NR_ONCHIP_DMA_CHANNELS. Likewise, subtypes with a larger number
- * of channels should expand on this.
- *
- * For most subtypes we can easily figure these values out with some
- * basic calculation, unfortunately on other subtypes these are more
- * scattered, so we just leave it unrolled for simplicity.
- */
-#define SAR	((unsigned long[]){SH_DMAC_BASE + 0x00, SH_DMAC_BASE + 0x10, \
-				   SH_DMAC_BASE + 0x20, SH_DMAC_BASE + 0x30, \
-				   SH_DMAC_BASE + 0x50, SH_DMAC_BASE + 0x60})
-#define DAR	((unsigned long[]){SH_DMAC_BASE + 0x04, SH_DMAC_BASE + 0x14, \
-				   SH_DMAC_BASE + 0x24, SH_DMAC_BASE + 0x34, \
-				   SH_DMAC_BASE + 0x54, SH_DMAC_BASE + 0x64})
-#define DMATCR	((unsigned long[]){SH_DMAC_BASE + 0x08, SH_DMAC_BASE + 0x18, \
-				   SH_DMAC_BASE + 0x28, SH_DMAC_BASE + 0x38, \
-				   SH_DMAC_BASE + 0x58, SH_DMAC_BASE + 0x68})
-#define CHCR	((unsigned long[]){SH_DMAC_BASE + 0x0c, SH_DMAC_BASE + 0x1c, \
-				   SH_DMAC_BASE + 0x2c, SH_DMAC_BASE + 0x3c, \
-				   SH_DMAC_BASE + 0x5c, SH_DMAC_BASE + 0x6c})
-
-#define DMAOR	(SH_DMAC_BASE + 0x40)
-
-#endif /* __DMA_SH_H */
-
diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c
index 078dc44d6b08..773d575a04b9 100644
--- a/arch/sh/drivers/pci/pci-sh7780.c
+++ b/arch/sh/drivers/pci/pci-sh7780.c
@@ -127,8 +127,8 @@ int __init sh7780_pcic_init(struct sh4_pci_address_map *map)
 	pci_write_reg(word, SH4_PCILSR0);
 	pci_write_reg(0x00000001, SH4_PCILSR1);
 	/* Set the values on window 0 PCI config registers */
-	word = (CONFIG_MEMORY_SIZE > 0x08000000) ? 0x10000000 : 0x08000000;
-	pci_write_reg(word | 0xa0000000, SH4_PCILAR0);
+	word = CONFIG_MEMORY_START | (CONFIG_MEMORY_SIZE - 0x01000000);
+	pci_write_reg(word, SH4_PCILAR0);
 	pci_write_reg(word, SH7780_PCIMBAR0);
 	/* Set the values on window 1 PCI config registers */
 	pci_write_reg(0x00000000, SH4_PCILAR1);