Merge tag 'sound-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "It was holiday season, so no wonder that there are little changes in
  framework level, although diffstat shows quite many changes spreaded
  over sound/* directories.  Most of changes are cleanups, code
  refactoring and fixes.

  Some highlights:
   - Removal of OSS sleep_on usages by Arnd
   - Simplified memalloc helper codes, drop obsoleted features; now it's
     built into PCM driver instead of an individual module
   - Warn if PCM buffer preallocation fails, which will show page
     allocation issues more clearly
   - Compress offload API updates for sample rates by Vinod
   - PCM glitch workaround on ctxfi emu20k1 by Sarah
   - Drop cs46xx DSP blobs, using firmware loader now
   - USB-audio quitks for Plantronics Gamecom 780, Creative VF0420, and
     Focusrite Saffire 6

  HD-audio specifics:
   - Standardize Kconfigs of HD-audio codec drivers; now "make
     localmodconfig" recognizes configs properly (finally!)
   - Parallel PM implementation by Mengdong
   - BayleyBay/ValleyView2 board fixups
   - Broadwell audio support
   - Runtime PM improvement (PantherPoint, etc)
   - Quirks: Dell subwooer, Gigabyte mobo jack detection oddity, Dell
     AiO click noise fixes, Dell headset mic fixes, etc
   - Automatic bind with HDMI codec parser without generic parser
   - More AD codec fixes (since 3.12 regression) including the automatic
     stereo mix support
   - Common Thinkpad ACPI helper for Realtek and Conexant codecs

  ASoC specifics:
   - Update to the generic DMA code to support deferred probe and
     managed resources
   - New drivers for BCM2835 (used in Raspberry Pi), Tegra with MAX98090
     and Analog Devices AXI I2S and S/PDIF controller IPs
   - Device tree support for the simple card, max98090 and cs42l52
   - Conversion of the Samsung drivers to native dmaengine, making them
     multiplatform compatible and hopefully helping keep them more
     modern and up to date.
   - More regmap conversions, including a very welcome one for twl6040
     from Peter Ujfalusi
   - A big overhaul of the DaVinci drivers also from Peter Ujfalusi
   - Lots of DMA updates from Lars-Peter
   - Improvements to the constraints handling code from Lars-Peter
   - A very helpful conversion of the TWL4030 driver to regmap from Peter
   - A new driver for the Freescale ESAI controller from Nicolin Chen
   - Conversion of some of the drivers to use params_width()
   - Extensions to DPCM for use with compressed audio from Liam"

* tag 'sound-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (396 commits)
  ASoC: dapm: Fix double prefix addition
  ASoC: compress: Add suport for DPCM into compressed audio
  ASoC: DPCM: make some DPCM API calls non static for compressed usage
  ASoC: core: Fix possible NULL pointer dereference of pcm->config
  ALSA: hda - add headset mic detect quirks for some Dell machines
  ASoC: tlv320aic32x4: Fix regmap range_min
  ASoC: core: Return -ENOTSUPP from set_sysclk() if no operation provided
  ASoC: dapm: Change prototype of soc_widget_read
  ASoC: samsung: Remove SND_DMAENGINE_PCM_FLAG_NO_RESIDUE flag
  ASoC: axi-{spdif,i2s}: Remove SND_DMAENGINE_PCM_FLAG_NO_RESIDUE flag
  ASoC: generic-dmaengine-pcm: Check DMA residue granularity
  ASoC: generic-dmaengine-pcm: Check NO_RESIDUE flag at runtime
  dma: pl330: Set residue_granularity
  dma: Indicate residue granularity in dma_slave_caps
  ASoC: simple-card: fix one bug to writing to the platform data
  ASoC: pcm: Use snd_pcm_rate_mask_intersect() helper
  ALSA: Add helper function for intersecting two rate masks
  ASoC: s6000: Don't mix SNDRV_PCM_RATE_CONTINUOUS with specific rates
  ASoC: fsl: Don't mix SNDRV_PCM_RATE_CONTINUOUS with specific rates
  ASoC: pcm: Properly initialize hw->rate_max
  ...

6 files changed, 296 insertions, 868 deletions

diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 175f01501129..64f04e6f9c31 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -17,9 +17,10 @@ config CPU_S3C6410
 	help
 	  Enable S3C6410 CPU support
 
-config S3C64XX_DMA
-	bool "S3C64XX DMA"
-	select S3C_DMA
+config S3C64XX_PL080
+	bool "S3C64XX DMA using generic PL08x driver"
+	select AMBA_PL08X
+	select SAMSUNG_DMADEV
 
 config S3C64XX_SETUP_SDHCI
 	bool
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 6faedcffce04..58069a702a43 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -26,7 +26,7 @@ obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 
 # DMA support
 
-obj-$(CONFIG_S3C64XX_DMA)	+= dma.o
+obj-$(CONFIG_S3C64XX_PL080)	+= pl080.o
 
 # Device support
 
diff --git a/arch/arm/mach-s3c64xx/common.h b/arch/arm/mach-s3c64xx/common.h
index bd3bd562011e..7043e7a3a67e 100644
--- a/arch/arm/mach-s3c64xx/common.h
+++ b/arch/arm/mach-s3c64xx/common.h
@@ -58,4 +58,9 @@ int __init s3c64xx_pm_late_initcall(void);
 static inline int s3c64xx_pm_late_initcall(void) { return 0; }
 #endif
 
+#ifdef CONFIG_S3C64XX_PL080
+extern struct pl08x_platform_data s3c64xx_dma0_plat_data;
+extern struct pl08x_platform_data s3c64xx_dma1_plat_data;
+#endif
+
 #endif /* __ARCH_ARM_MACH_S3C64XX_COMMON_H */
diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
deleted file mode 100644
index 7e22c2113816..000000000000
--- a/arch/arm/mach-s3c64xx/dma.c
+++ /dev/null
@@ -1,762 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/dma.c
- *
- * Copyright 2009 Openmoko, Inc.
- * Copyright 2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX DMA core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/*
- * NOTE: Code in this file is not used when booting with Device Tree support.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/dmapool.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/amba/pl080.h>
-#include <linux/of.h>
-
-#include <mach/dma.h>
-#include <mach/map.h>
-#include <mach/irqs.h>
-
-#include "regs-sys.h"
-
-/* dma channel state information */
-
-struct s3c64xx_dmac {
-	struct device		dev;
-	struct clk		*clk;
-	void __iomem		*regs;
-	struct s3c2410_dma_chan *channels;
-	enum dma_ch		 chanbase;
-};
-
-/* pool to provide LLI buffers */
-static struct dma_pool *dma_pool;
-
-/* Debug configuration and code */
-
-static unsigned char debug_show_buffs = 0;
-
-static void dbg_showchan(struct s3c2410_dma_chan *chan)
-{
-	pr_debug("DMA%d: %08x->%08x L %08x C %08x,%08x S %08x\n",
-		 chan->number,
-		 readl(chan->regs + PL080_CH_SRC_ADDR),
-		 readl(chan->regs + PL080_CH_DST_ADDR),
-		 readl(chan->regs + PL080_CH_LLI),
-		 readl(chan->regs + PL080_CH_CONTROL),
-		 readl(chan->regs + PL080S_CH_CONTROL2),
-		 readl(chan->regs + PL080S_CH_CONFIG));
-}
-
-static void show_lli(struct pl080s_lli *lli)
-{
-	pr_debug("LLI[%p] %08x->%08x, NL %08x C %08x,%08x\n",
-		 lli, lli->src_addr, lli->dst_addr, lli->next_lli,
-		 lli->control0, lli->control1);
-}
-
-static void dbg_showbuffs(struct s3c2410_dma_chan *chan)
-{
-	struct s3c64xx_dma_buff *ptr;
-	struct s3c64xx_dma_buff *end;
-
-	pr_debug("DMA%d: buffs next %p, curr %p, end %p\n",
-		 chan->number, chan->next, chan->curr, chan->end);
-
-	ptr = chan->next;
-	end = chan->end;
-
-	if (debug_show_buffs) {
-		for (; ptr != NULL; ptr = ptr->next) {
-			pr_debug("DMA%d: %08x ",
-				 chan->number, ptr->lli_dma);
-			show_lli(ptr->lli);
-		}
-	}
-}
-
-/* End of Debug */
-
-static struct s3c2410_dma_chan *s3c64xx_dma_map_channel(unsigned int channel)
-{
-	struct s3c2410_dma_chan *chan;
-	unsigned int start, offs;
-
-	start = 0;
-
-	if (channel >= DMACH_PCM1_TX)
-		start = 8;
-
-	for (offs = 0; offs < 8; offs++) {
-		chan = &s3c2410_chans[start + offs];
-		if (!chan->in_use)
-			goto found;
-	}
-
-	return NULL;
-
-found:
-	s3c_dma_chan_map[channel] = chan;
-	return chan;
-}
-
-int s3c2410_dma_config(enum dma_ch channel, int xferunit)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	switch (xferunit) {
-	case 1:
-		chan->hw_width = 0;
-		break;
-	case 2:
-		chan->hw_width = 1;
-		break;
-	case 4:
-		chan->hw_width = 2;
-		break;
-	default:
-		printk(KERN_ERR "%s: illegal width %d\n", __func__, xferunit);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_config);
-
-static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan,
-				 struct pl080s_lli *lli,
-				 dma_addr_t data, int size)
-{
-	dma_addr_t src, dst;
-	u32 control0, control1;
-
-	switch (chan->source) {
-	case DMA_FROM_DEVICE:
-		src = chan->dev_addr;
-		dst = data;
-		control0 = PL080_CONTROL_SRC_AHB2;
-		control0 |= PL080_CONTROL_DST_INCR;
-		break;
-
-	case DMA_TO_DEVICE:
-		src = data;
-		dst = chan->dev_addr;
-		control0 = PL080_CONTROL_DST_AHB2;
-		control0 |= PL080_CONTROL_SRC_INCR;
-		break;
-	default:
-		BUG();
-	}
-
-	/* note, we do not currently setup any of the burst controls */
-
-	control1 = size >> chan->hw_width;	/* size in no of xfers */
-	control0 |= PL080_CONTROL_PROT_SYS;	/* always in priv. mode */
-	control0 |= PL080_CONTROL_TC_IRQ_EN;	/* always fire IRQ */
-	control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT;
-	control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT;
-
-	lli->src_addr = src;
-	lli->dst_addr = dst;
-	lli->next_lli = 0;
-	lli->control0 = control0;
-	lli->control1 = control1;
-}
-
-static void s3c64xx_lli_to_regs(struct s3c2410_dma_chan *chan,
-				struct pl080s_lli *lli)
-{
-	void __iomem *regs = chan->regs;
-
-	pr_debug("%s: LLI %p => regs\n", __func__, lli);
-	show_lli(lli);
-
-	writel(lli->src_addr, regs + PL080_CH_SRC_ADDR);
-	writel(lli->dst_addr, regs + PL080_CH_DST_ADDR);
-	writel(lli->next_lli, regs + PL080_CH_LLI);
-	writel(lli->control0, regs + PL080_CH_CONTROL);
-	writel(lli->control1, regs + PL080S_CH_CONTROL2);
-}
-
-static int s3c64xx_dma_start(struct s3c2410_dma_chan *chan)
-{
-	struct s3c64xx_dmac *dmac = chan->dmac;
-	u32 config;
-	u32 bit = chan->bit;
-
-	dbg_showchan(chan);
-
-	pr_debug("%s: clearing interrupts\n", __func__);
-
-	/* clear interrupts */
-	writel(bit, dmac->regs + PL080_TC_CLEAR);
-	writel(bit, dmac->regs + PL080_ERR_CLEAR);
-
-	pr_debug("%s: starting channel\n", __func__);
-
-	config = readl(chan->regs + PL080S_CH_CONFIG);
-	config |= PL080_CONFIG_ENABLE;
-	config &= ~PL080_CONFIG_HALT;
-
-	pr_debug("%s: writing config %08x\n", __func__, config);
-	writel(config, chan->regs + PL080S_CH_CONFIG);
-
-	return 0;
-}
-
-static int s3c64xx_dma_stop(struct s3c2410_dma_chan *chan)
-{
-	u32 config;
-	int timeout;
-
-	pr_debug("%s: stopping channel\n", __func__);
-
-	dbg_showchan(chan);
-
-	config = readl(chan->regs + PL080S_CH_CONFIG);
-	config |= PL080_CONFIG_HALT;
-	writel(config, chan->regs + PL080S_CH_CONFIG);
-
-	timeout = 1000;
-	do {
-		config = readl(chan->regs + PL080S_CH_CONFIG);
-		pr_debug("%s: %d - config %08x\n", __func__, timeout, config);
-		if (config & PL080_CONFIG_ACTIVE)
-			udelay(10);
-		else
-			break;
-		} while (--timeout > 0);
-
-	if (config & PL080_CONFIG_ACTIVE) {
-		printk(KERN_ERR "%s: channel still active\n", __func__);
-		return -EFAULT;
-	}
-
-	config = readl(chan->regs + PL080S_CH_CONFIG);
-	config &= ~PL080_CONFIG_ENABLE;
-	writel(config, chan->regs + PL080S_CH_CONFIG);
-
-	return 0;
-}
-
-static inline void s3c64xx_dma_bufffdone(struct s3c2410_dma_chan *chan,
-					 struct s3c64xx_dma_buff *buf,
-					 enum s3c2410_dma_buffresult result)
-{
-	if (chan->callback_fn != NULL)
-		(chan->callback_fn)(chan, buf->pw, 0, result);
-}
-
-static void s3c64xx_dma_freebuff(struct s3c64xx_dma_buff *buff)
-{
-	dma_pool_free(dma_pool, buff->lli, buff->lli_dma);
-	kfree(buff);
-}
-
-static int s3c64xx_dma_flush(struct s3c2410_dma_chan *chan)
-{
-	struct s3c64xx_dma_buff *buff, *next;
-	u32 config;
-
-	dbg_showchan(chan);
-
-	pr_debug("%s: flushing channel\n", __func__);
-
-	config = readl(chan->regs + PL080S_CH_CONFIG);
-	config &= ~PL080_CONFIG_ENABLE;
-	writel(config, chan->regs + PL080S_CH_CONFIG);
-
-	/* dump all the buffers associated with this channel */
-
-	for (buff = chan->curr; buff != NULL; buff = next) {
-		next = buff->next;
-		pr_debug("%s: buff %p (next %p)\n", __func__, buff, buff->next);
-
-		s3c64xx_dma_bufffdone(chan, buff, S3C2410_RES_ABORT);
-		s3c64xx_dma_freebuff(buff);
-	}
-
-	chan->curr = chan->next = chan->end = NULL;
-
-	return 0;
-}
-
-int s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-
-	WARN_ON(!chan);
-	if (!chan)
-		return -EINVAL;
-
-	switch (op) {
-	case S3C2410_DMAOP_START:
-		return s3c64xx_dma_start(chan);
-
-	case S3C2410_DMAOP_STOP:
-		return s3c64xx_dma_stop(chan);
-
-	case S3C2410_DMAOP_FLUSH:
-		return s3c64xx_dma_flush(chan);
-
-	/* believe PAUSE/RESUME are no-ops */
-	case S3C2410_DMAOP_PAUSE:
-	case S3C2410_DMAOP_RESUME:
-	case S3C2410_DMAOP_STARTED:
-	case S3C2410_DMAOP_TIMEOUT:
-		return 0;
-	}
-
-	return -ENOENT;
-}
-EXPORT_SYMBOL(s3c2410_dma_ctrl);
-
-/* s3c2410_dma_enque
- *
- */
-
-int s3c2410_dma_enqueue(enum dma_ch channel, void *id,
-			dma_addr_t data, int size)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-	struct s3c64xx_dma_buff *next;
-	struct s3c64xx_dma_buff *buff;
-	struct pl080s_lli *lli;
-	unsigned long flags;
-	int ret;
-
-	WARN_ON(!chan);
-	if (!chan)
-		return -EINVAL;
-
-	buff = kzalloc(sizeof(struct s3c64xx_dma_buff), GFP_ATOMIC);
-	if (!buff) {
-		printk(KERN_ERR "%s: no memory for buffer\n", __func__);
-		return -ENOMEM;
-	}
-
-	lli = dma_pool_alloc(dma_pool, GFP_ATOMIC, &buff->lli_dma);
-	if (!lli) {
-		printk(KERN_ERR "%s: no memory for lli\n", __func__);
-		ret = -ENOMEM;
-		goto err_buff;
-	}
-
-	pr_debug("%s: buff %p, dp %08x lli (%p, %08x) %d\n",
-		 __func__, buff, data, lli, (u32)buff->lli_dma, size);
-
-	buff->lli = lli;
-	buff->pw = id;
-
-	s3c64xx_dma_fill_lli(chan, lli, data, size);
-
-	local_irq_save(flags);
-
-	if ((next = chan->next) != NULL) {
-		struct s3c64xx_dma_buff *end = chan->end;
-		struct pl080s_lli *endlli = end->lli;
-
-		pr_debug("enquing onto channel\n");
-
-		end->next = buff;
-		endlli->next_lli = buff->lli_dma;
-
-		if (chan->flags & S3C2410_DMAF_CIRCULAR) {
-			struct s3c64xx_dma_buff *curr = chan->curr;
-			lli->next_lli = curr->lli_dma;
-		}
-
-		if (next == chan->curr) {
-			writel(buff->lli_dma, chan->regs + PL080_CH_LLI);
-			chan->next = buff;
-		}
-
-		show_lli(endlli);
-		chan->end = buff;
-	} else {
-		pr_debug("enquing onto empty channel\n");
-
-		chan->curr = buff;
-		chan->next = buff;
-		chan->end = buff;
-
-		s3c64xx_lli_to_regs(chan, lli);
-	}
-
-	local_irq_restore(flags);
-
-	show_lli(lli);
-
-	dbg_showchan(chan);
-	dbg_showbuffs(chan);
-	return 0;
-
-err_buff:
-	kfree(buff);
-	return ret;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_enqueue);
-
-
-int s3c2410_dma_devconfig(enum dma_ch channel,
-			  enum dma_data_direction source,
-			  unsigned long devaddr)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-	u32 peripheral;
-	u32 config = 0;
-
-	pr_debug("%s: channel %d, source %d, dev %08lx, chan %p\n",
-		 __func__, channel, source, devaddr, chan);
-
-	WARN_ON(!chan);
-	if (!chan)
-		return -EINVAL;
-
-	peripheral = (chan->peripheral & 0xf);
-	chan->source = source;
-	chan->dev_addr = devaddr;
-
-	pr_debug("%s: peripheral %d\n", __func__, peripheral);
-
-	switch (source) {
-	case DMA_FROM_DEVICE:
-		config = 2 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
-		config |= peripheral << PL080_CONFIG_SRC_SEL_SHIFT;
-		break;
-	case DMA_TO_DEVICE:
-		config = 1 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
-		config |= peripheral << PL080_CONFIG_DST_SEL_SHIFT;
-		break;
-	default:
-		printk(KERN_ERR "%s: bad source\n", __func__);
-		return -EINVAL;
-	}
-
-	/* allow TC and ERR interrupts */
-	config |= PL080_CONFIG_TC_IRQ_MASK;
-	config |= PL080_CONFIG_ERR_IRQ_MASK;
-
-	pr_debug("%s: config %08x\n", __func__, config);
-
-	writel(config, chan->regs + PL080S_CH_CONFIG);
-
-	return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_devconfig);
-
-
-int s3c2410_dma_getposition(enum dma_ch channel,
-			    dma_addr_t *src, dma_addr_t *dst)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-
-	WARN_ON(!chan);
-	if (!chan)
-		return -EINVAL;
-
-	if (src != NULL)
-		*src = readl(chan->regs + PL080_CH_SRC_ADDR);
-
-	if (dst != NULL)
-		*dst = readl(chan->regs + PL080_CH_DST_ADDR);
-
-	return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_getposition);
-
-/* s3c2410_request_dma
- *
- * get control of an dma channel
-*/
-
-int s3c2410_dma_request(enum dma_ch channel,
-			struct s3c2410_dma_client *client,
-			void *dev)
-{
-	struct s3c2410_dma_chan *chan;
-	unsigned long flags;
-
-	pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n",
-		 channel, client->name, dev);
-
-	local_irq_save(flags);
-
-	chan = s3c64xx_dma_map_channel(channel);
-	if (chan == NULL) {
-		local_irq_restore(flags);
-		return -EBUSY;
-	}
-
-	dbg_showchan(chan);
-
-	chan->client = client;
-	chan->in_use = 1;
-	chan->peripheral = channel;
-	chan->flags = 0;
-
-	local_irq_restore(flags);
-
-	/* need to setup */
-
-	pr_debug("%s: channel initialised, %p\n", __func__, chan);
-
-	return chan->number | DMACH_LOW_LEVEL;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_request);
-
-/* s3c2410_dma_free
- *
- * release the given channel back to the system, will stop and flush
- * any outstanding transfers, and ensure the channel is ready for the
- * next claimant.
- *
- * Note, although a warning is currently printed if the freeing client
- * info is not the same as the registrant's client info, the free is still
- * allowed to go through.
-*/
-
-int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *client)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-	unsigned long flags;
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	local_irq_save(flags);
-
-	if (chan->client != client) {
-		printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n",
-		       channel, chan->client, client);
-	}
-
-	/* sort out stopping and freeing the channel */
-
-
-	chan->client = NULL;
-	chan->in_use = 0;
-
-	if (!(channel & DMACH_LOW_LEVEL))
-		s3c_dma_chan_map[channel] = NULL;
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_free);
-
-static irqreturn_t s3c64xx_dma_irq(int irq, void *pw)
-{
-	struct s3c64xx_dmac *dmac = pw;
-	struct s3c2410_dma_chan *chan;
-	enum s3c2410_dma_buffresult res;
-	u32 tcstat, errstat;
-	u32 bit;
-	int offs;
-
-	tcstat = readl(dmac->regs + PL080_TC_STATUS);
-	errstat = readl(dmac->regs + PL080_ERR_STATUS);
-
-	for (offs = 0, bit = 1; offs < 8; offs++, bit <<= 1) {
-		struct s3c64xx_dma_buff *buff;
-
-		if (!(errstat & bit) && !(tcstat & bit))
-			continue;
-
-		chan = dmac->channels + offs;
-		res = S3C2410_RES_ERR;
-
-		if (tcstat & bit) {
-			writel(bit, dmac->regs + PL080_TC_CLEAR);
-			res = S3C2410_RES_OK;
-		}
-
-		if (errstat & bit)
-			writel(bit, dmac->regs + PL080_ERR_CLEAR);
-
-		/* 'next' points to the buffer that is next to the
-		 * currently active buffer.
-		 * For CIRCULAR queues, 'next' will be same as 'curr'
-		 * when 'end' is the active buffer.
-		 */
-		buff = chan->curr;
-		while (buff && buff != chan->next
-				&& buff->next != chan->next)
-			buff = buff->next;
-
-		if (!buff)
-			BUG();
-
-		if (buff == chan->next)
-			buff = chan->end;
-
-		s3c64xx_dma_bufffdone(chan, buff, res);
-
-		/* Free the node and update curr, if non-circular queue */
-		if (!(chan->flags & S3C2410_DMAF_CIRCULAR)) {
-			chan->curr = buff->next;
-			s3c64xx_dma_freebuff(buff);
-		}
-
-		/* Update 'next' */
-		buff = chan->next;
-		if (chan->next == chan->end) {
-			chan->next = chan->curr;
-			if (!(chan->flags & S3C2410_DMAF_CIRCULAR))
-				chan->end = NULL;
-		} else {
-			chan->next = buff->next;
-		}
-	}
-
-	return IRQ_HANDLED;
-}
-
-static struct bus_type dma_subsys = {
-	.name		= "s3c64xx-dma",
-	.dev_name	= "s3c64xx-dma",
-};
-
-static int s3c64xx_dma_init1(int chno, enum dma_ch chbase,
-			     int irq, unsigned int base)
-{
-	struct s3c2410_dma_chan *chptr = &s3c2410_chans[chno];
-	struct s3c64xx_dmac *dmac;
-	char clkname[16];
-	void __iomem *regs;
-	void __iomem *regptr;
-	int err, ch;
-
-	dmac = kzalloc(sizeof(struct s3c64xx_dmac), GFP_KERNEL);
-	if (!dmac) {
-		printk(KERN_ERR "%s: failed to alloc mem\n", __func__);
-		return -ENOMEM;
-	}
-
-	dmac->dev.id = chno / 8;
-	dmac->dev.bus = &dma_subsys;
-
-	err = device_register(&dmac->dev);
-	if (err) {
-		printk(KERN_ERR "%s: failed to register device\n", __func__);
-		goto err_alloc;
-	}
-
-	regs = ioremap(base, 0x200);
-	if (!regs) {
-		printk(KERN_ERR "%s: failed to ioremap()\n", __func__);
-		err = -ENXIO;
-		goto err_dev;
-	}
-
-	snprintf(clkname, sizeof(clkname), "dma%d", dmac->dev.id);
-
-	dmac->clk = clk_get(NULL, clkname);
-	if (IS_ERR(dmac->clk)) {
-		printk(KERN_ERR "%s: failed to get clock %s\n", __func__, clkname);
-		err = PTR_ERR(dmac->clk);
-		goto err_map;
-	}
-
-	clk_prepare_enable(dmac->clk);
-
-	dmac->regs = regs;
-	dmac->chanbase = chbase;
-	dmac->channels = chptr;
-
-	err = request_irq(irq, s3c64xx_dma_irq, 0, "DMA", dmac);
-	if (err < 0) {
-		printk(KERN_ERR "%s: failed to get irq\n", __func__);
-		goto err_clk;
-	}
-
-	regptr = regs + PL080_Cx_BASE(0);
-
-	for (ch = 0; ch < 8; ch++, chptr++) {
-		pr_debug("%s: registering DMA %d (%p)\n",
-			 __func__, chno + ch, regptr);
-
-		chptr->bit = 1 << ch;
-		chptr->number = chno + ch;
-		chptr->dmac = dmac;
-		chptr->regs = regptr;
-		regptr += PL080_Cx_STRIDE;
-	}
-
-	/* for the moment, permanently enable the controller */
-	writel(PL080_CONFIG_ENABLE, regs + PL080_CONFIG);
-
-	printk(KERN_INFO "PL080: IRQ %d, at %p, channels %d..%d\n",
-	       irq, regs, chno, chno+8);
-
-	return 0;
-
-err_clk:
-	clk_disable_unprepare(dmac->clk);
-	clk_put(dmac->clk);
-err_map:
-	iounmap(regs);
-err_dev:
-	device_unregister(&dmac->dev);
-err_alloc:
-	kfree(dmac);
-	return err;
-}
-
-static int __init s3c64xx_dma_init(void)
-{
-	int ret;
-
-	/* This driver is not supported when booting with device tree. */
-	if (of_have_populated_dt())
-		return -ENODEV;
-
-	printk(KERN_INFO "%s: Registering DMA channels\n", __func__);
-
-	dma_pool = dma_pool_create("DMA-LLI", NULL, sizeof(struct pl080s_lli), 16, 0);
-	if (!dma_pool) {
-		printk(KERN_ERR "%s: failed to create pool\n", __func__);
-		return -ENOMEM;
-	}
-
-	ret = subsys_system_register(&dma_subsys, NULL);
-	if (ret) {
-		printk(KERN_ERR "%s: failed to create subsys\n", __func__);
-		return -ENOMEM;
-	}
-
-	/* Set all DMA configuration to be DMA, not SDMA */
-	writel(0xffffff, S3C64XX_SDMA_SEL);
-
-	/* Register standard DMA controllers */
-	s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000);
-	s3c64xx_dma_init1(8, DMACH_PCM1_TX, IRQ_DMA1, 0x75100000);
-
-	return 0;
-}
-
-arch_initcall(s3c64xx_dma_init);
diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h
index fe1a98cf0e4c..059b1fc85037 100644
--- a/arch/arm/mach-s3c64xx/include/mach/dma.h
+++ b/arch/arm/mach-s3c64xx/include/mach/dma.h
@@ -11,51 +11,48 @@
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H __FILE__
 
-#define S3C_DMA_CHANNELS	(16)
+#define S3C64XX_DMA_CHAN(name)		((unsigned long)(name))
+
+/* DMA0/SDMA0 */
+#define DMACH_UART0		S3C64XX_DMA_CHAN("uart0_tx")
+#define DMACH_UART0_SRC2	S3C64XX_DMA_CHAN("uart0_rx")
+#define DMACH_UART1		S3C64XX_DMA_CHAN("uart1_tx")
+#define DMACH_UART1_SRC2	S3C64XX_DMA_CHAN("uart1_rx")
+#define DMACH_UART2		S3C64XX_DMA_CHAN("uart2_tx")
+#define DMACH_UART2_SRC2	S3C64XX_DMA_CHAN("uart2_rx")
+#define DMACH_UART3		S3C64XX_DMA_CHAN("uart3_tx")
+#define DMACH_UART3_SRC2	S3C64XX_DMA_CHAN("uart3_rx")
+#define DMACH_PCM0_TX		S3C64XX_DMA_CHAN("pcm0_tx")
+#define DMACH_PCM0_RX		S3C64XX_DMA_CHAN("pcm0_rx")
+#define DMACH_I2S0_OUT		S3C64XX_DMA_CHAN("i2s0_tx")
+#define DMACH_I2S0_IN		S3C64XX_DMA_CHAN("i2s0_rx")
+#define DMACH_SPI0_TX		S3C64XX_DMA_CHAN("spi0_tx")
+#define DMACH_SPI0_RX		S3C64XX_DMA_CHAN("spi0_rx")
+#define DMACH_HSI_I2SV40_TX	S3C64XX_DMA_CHAN("i2s2_tx")
+#define DMACH_HSI_I2SV40_RX	S3C64XX_DMA_CHAN("i2s2_rx")
+
+/* DMA1/SDMA1 */
+#define DMACH_PCM1_TX		S3C64XX_DMA_CHAN("pcm1_tx")
+#define DMACH_PCM1_RX		S3C64XX_DMA_CHAN("pcm1_rx")
+#define DMACH_I2S1_OUT		S3C64XX_DMA_CHAN("i2s1_tx")
+#define DMACH_I2S1_IN		S3C64XX_DMA_CHAN("i2s1_rx")
+#define DMACH_SPI1_TX		S3C64XX_DMA_CHAN("spi1_tx")
+#define DMACH_SPI1_RX		S3C64XX_DMA_CHAN("spi1_rx")
+#define DMACH_AC97_PCMOUT	S3C64XX_DMA_CHAN("ac97_out")
+#define DMACH_AC97_PCMIN	S3C64XX_DMA_CHAN("ac97_in")
+#define DMACH_AC97_MICIN	S3C64XX_DMA_CHAN("ac97_mic")
+#define DMACH_PWM		S3C64XX_DMA_CHAN("pwm")
+#define DMACH_IRDA		S3C64XX_DMA_CHAN("irda")
+#define DMACH_EXTERNAL		S3C64XX_DMA_CHAN("external")
+#define DMACH_SECURITY_RX	S3C64XX_DMA_CHAN("sec_rx")
+#define DMACH_SECURITY_TX	S3C64XX_DMA_CHAN("sec_tx")
 
-/* see mach-s3c2410/dma.h for notes on dma channel numbers */
-
-/* Note, for the S3C64XX architecture we keep the DMACH_
- * defines in the order they are allocated to [S]DMA0/[S]DMA1
- * so that is easy to do DHACH_ -> DMA controller conversion
- */
 enum dma_ch {
-	/* DMA0/SDMA0 */
-	DMACH_UART0 = 0,
-	DMACH_UART0_SRC2,
-	DMACH_UART1,
-	DMACH_UART1_SRC2,
-	DMACH_UART2,
-	DMACH_UART2_SRC2,
-	DMACH_UART3,
-	DMACH_UART3_SRC2,
-	DMACH_PCM0_TX,
-	DMACH_PCM0_RX,
-	DMACH_I2S0_OUT,
-	DMACH_I2S0_IN,
-	DMACH_SPI0_TX,
-	DMACH_SPI0_RX,
-	DMACH_HSI_I2SV40_TX,
-	DMACH_HSI_I2SV40_RX,
+	DMACH_MAX = 32
+};
 
-	/* DMA1/SDMA1 */
-	DMACH_PCM1_TX = 16,
-	DMACH_PCM1_RX,
-	DMACH_I2S1_OUT,
-	DMACH_I2S1_IN,
-	DMACH_SPI1_TX,
-	DMACH_SPI1_RX,
-	DMACH_AC97_PCMOUT,
-	DMACH_AC97_PCMIN,
-	DMACH_AC97_MICIN,
-	DMACH_PWM,
-	DMACH_IRDA,
-	DMACH_EXTERNAL,
-	DMACH_RES1,
-	DMACH_RES2,
-	DMACH_SECURITY_RX,	/* SDMA1 only */
-	DMACH_SECURITY_TX,	/* SDMA1 only */
-	DMACH_MAX		/* the end */
+struct s3c2410_dma_client {
+	char	*name;
 };
 
 static inline bool samsung_dma_has_circular(void)
@@ -65,67 +62,10 @@ static inline bool samsung_dma_has_circular(void)
 
 static inline bool samsung_dma_is_dmadev(void)
 {
-	return false;
+	return true;
 }
-#define S3C2410_DMAF_CIRCULAR		(1 << 0)
-
-#include <plat/dma.h>
-
-#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */
-
-struct s3c64xx_dma_buff;
-
-/** s3c64xx_dma_buff - S3C64XX DMA buffer descriptor
- * @next: Pointer to next buffer in queue or ring.
- * @pw: Client provided identifier
- * @lli: Pointer to hardware descriptor this buffer is associated with.
- * @lli_dma: Hardare address of the descriptor.
- */
-struct s3c64xx_dma_buff {
-	struct s3c64xx_dma_buff *next;
-
-	void			*pw;
-	struct pl080s_lli	*lli;
-	dma_addr_t		 lli_dma;
-};
-
-struct s3c64xx_dmac;
-
-struct s3c2410_dma_chan {
-	unsigned char		 number;      /* number of this dma channel */
-	unsigned char		 in_use;      /* channel allocated */
-	unsigned char		 bit;	      /* bit for enable/disable/etc */
-	unsigned char		 hw_width;
-	unsigned char		 peripheral;
-
-	unsigned int		 flags;
-	enum dma_data_direction	 source;
-
-
-	dma_addr_t		dev_addr;
-
-	struct s3c2410_dma_client *client;
-	struct s3c64xx_dmac	*dmac;		/* pointer to controller */
-
-	void __iomem		*regs;
-
-	/* cdriver callbacks */
-	s3c2410_dma_cbfn_t	 callback_fn;	/* buffer done callback */
-	s3c2410_dma_opfn_t	 op_fn;		/* channel op callback */
-
-	/* buffer list and information */
-	struct s3c64xx_dma_buff	*curr;		/* current dma buffer */
-	struct s3c64xx_dma_buff	*next;		/* next buffer to load */
-	struct s3c64xx_dma_buff	*end;		/* end of queue */
-
-	/* note, when channel is running in circular mode, curr is the
-	 * first buffer enqueued, end is the last and curr is where the
-	 * last buffer-done event is set-at. The buffers are not freed
-	 * and the last buffer hardware descriptor points back to the
-	 * first.
-	 */
-};
 
-#include <plat/dma-core.h>
+#include <linux/amba/pl08x.h>
+#include <plat/dma-ops.h>
 
 #endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c64xx/pl080.c b/arch/arm/mach-s3c64xx/pl080.c
new file mode 100644
index 000000000000..901a984bddc2
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/pl080.c
@@ -0,0 +1,244 @@
+/*
+ * Samsung's S3C64XX generic DMA support using amba-pl08x driver.
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl080.h>
+#include <linux/amba/pl08x.h>
+#include <linux/of.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include "regs-sys.h"
+
+static int pl08x_get_xfer_signal(const struct pl08x_channel_data *cd)
+{
+	return cd->min_signal;
+}
+
+static void pl08x_put_xfer_signal(const struct pl08x_channel_data *cd, int ch)
+{
+}
+
+/*
+ * DMA0
+ */
+
+static struct pl08x_channel_data s3c64xx_dma0_info[] = {
+	{
+		.bus_id = "uart0_tx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart0_rx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart1_tx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart1_rx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart2_tx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart2_rx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart3_tx",
+		.min_signal = 6,
+		.max_signal = 6,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart3_rx",
+		.min_signal = 7,
+		.max_signal = 7,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "pcm0_tx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "pcm0_rx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s0_tx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s0_rx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "spi0_tx",
+		.min_signal = 12,
+		.max_signal = 12,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "spi0_rx",
+		.min_signal = 13,
+		.max_signal = 13,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s2_tx",
+		.min_signal = 14,
+		.max_signal = 14,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s2_rx",
+		.min_signal = 15,
+		.max_signal = 15,
+		.periph_buses = PL08X_AHB2,
+	}
+};
+
+struct pl08x_platform_data s3c64xx_dma0_plat_data = {
+	.memcpy_channel = {
+		.bus_id = "memcpy",
+		.cctl_memcpy =
+			(PL080_BSIZE_4 << PL080_CONTROL_SB_SIZE_SHIFT |
+			PL080_BSIZE_4 << PL080_CONTROL_DB_SIZE_SHIFT |
+			PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT |
+			PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT |
+			PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE |
+			PL080_CONTROL_PROT_SYS),
+	},
+	.lli_buses = PL08X_AHB1,
+	.mem_buses = PL08X_AHB1,
+	.get_xfer_signal = pl08x_get_xfer_signal,
+	.put_xfer_signal = pl08x_put_xfer_signal,
+	.slave_channels = s3c64xx_dma0_info,
+	.num_slave_channels = ARRAY_SIZE(s3c64xx_dma0_info),
+};
+
+static AMBA_AHB_DEVICE(s3c64xx_dma0, "dma-pl080s.0", 0,
+			0x75000000, {IRQ_DMA0}, &s3c64xx_dma0_plat_data);
+
+/*
+ * DMA1
+ */
+
+static struct pl08x_channel_data s3c64xx_dma1_info[] = {
+	{
+		.bus_id = "pcm1_tx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "pcm1_rx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s1_tx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s1_rx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "spi1_tx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "spi1_rx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ac97_out",
+		.min_signal = 6,
+		.max_signal = 6,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ac97_in",
+		.min_signal = 7,
+		.max_signal = 7,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ac97_mic",
+		.min_signal = 8,
+		.max_signal = 8,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "pwm",
+		.min_signal = 9,
+		.max_signal = 9,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "irda",
+		.min_signal = 10,
+		.max_signal = 10,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "external",
+		.min_signal = 11,
+		.max_signal = 11,
+		.periph_buses = PL08X_AHB2,
+	},
+};
+
+struct pl08x_platform_data s3c64xx_dma1_plat_data = {
+	.memcpy_channel = {
+		.bus_id = "memcpy",
+		.cctl_memcpy =
+			(PL080_BSIZE_4 << PL080_CONTROL_SB_SIZE_SHIFT |
+			PL080_BSIZE_4 << PL080_CONTROL_DB_SIZE_SHIFT |
+			PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT |
+			PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT |
+			PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE |
+			PL080_CONTROL_PROT_SYS),
+	},
+	.lli_buses = PL08X_AHB1,
+	.mem_buses = PL08X_AHB1,
+	.get_xfer_signal = pl08x_get_xfer_signal,
+	.put_xfer_signal = pl08x_put_xfer_signal,
+	.slave_channels = s3c64xx_dma1_info,
+	.num_slave_channels = ARRAY_SIZE(s3c64xx_dma1_info),
+};
+
+static AMBA_AHB_DEVICE(s3c64xx_dma1, "dma-pl080s.1", 0,
+			0x75100000, {IRQ_DMA1}, &s3c64xx_dma1_plat_data);
+
+static int __init s3c64xx_pl080_init(void)
+{
+	/* Set all DMA configuration to be DMA, not SDMA */
+	writel(0xffffff, S3C64XX_SDMA_SEL);
+
+	if (of_have_populated_dt())
+		return 0;
+
+	amba_device_register(&s3c64xx_dma0_device, &iomem_resource);
+	amba_device_register(&s3c64xx_dma1_device, &iomem_resource);
+
+	return 0;
+}
+arch_initcall(s3c64xx_pl080_init);