summaryrefslogtreecommitdiff
path: root/net/mac80211/tdls.c
AgeCommit message (Collapse)AuthorFilesLines
2015-01-23mac80211: tdls: disentangle HT supported conditionsJohannes Berg1-18/+18
These conditions are rather difficult to follow, for example because "!sta" only exists to not crash in the case that we don't have a station pointer (WLAN_TDLS_SETUP_REQUEST) in which the additional condition (peer supports HT) doesn't actually matter anyway. Cleaning this up only duplicates two lines of code but makes the rest far easier to read, so do that. As a side effect, smatch stops complaining about the lack of a sta pointer test after the !sta (since the !sta goes away) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-23mac80211: tdls: remove shadowing variableJohannes Berg1-1/+0
There's no need to use another local 'sta' variable as the original (outer scope) one isn't needed any more and has become invalid anyway when exiting the RCU read section. Remove the inner scope one and along with it the useless NULL initialization. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-14mac80211: add TDLS supported channels correctlyArik Nemtsov1-5/+21
The function adding the supported channels IE during a TDLS connection had several issues: 1. If the entire subband is usable, the function exitted the loop without adding it 2. The function only checked chandef_usable, ignoring flags like RADAR which would prevent TDLS off-channel communcation. 3. HT20 was explicitly required in the chandef, while not a requirement for TDLS off-channel. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-14mac80211: let flush() drop packets when possibleEmmanuel Grumbach1-3/+3
When roaming / suspending, it makes no sense to wait until the transmit queues of the device are empty. In extreme condition they can be starved (VO saturating the air), but even in regular cases, it is pointless to delay the roaming because the low level driver is trying to send packets to an AP which is far away. We'd rather drop these packets and let TCP retransmit if needed. This will allow to speed up the roaming. For suspend, the explanation is even more trivial. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: add TDLS channel-switch Rx flowArik Nemtsov1-0/+328
When receiving a TDLS channel switch request or response, parse the frame and call a new tdls_recv_channel_switch op in the low level driver with the parsed data. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: introduce TDLS channel switch opsArik Nemtsov1-0/+234
Implement the cfg80211 TDLS channel switch ops and introduce new mac80211 ones for low-level drivers. Verify low-level driver support for the new ops when using the relevant wiphy feature bit. Also verify the peer supports channel switching before passing the command down. Add a new STA flag to track the off-channel state with the TDLS peer and make sure to cancel the channel-switch if the peer STA is unexpectedly removed. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: prepare TDLS mgmt code for channel-switch templatesArik Nemtsov1-25/+57
Split the data-generating from the Tx-sending functionality, as we do not want to send templates to the lower driver. Also add an optional chandef argument to the data-generating portion. It will be used for channel-switch templates. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19cfg/mac80211: define TDLS channel switch feature bitArik Nemtsov1-3/+6
Define some related TDLS protocol constants and advertise channel switch support in the extended-capabilities IE when the feature bit is defined. Actually supporting TDLS channel-switching also requires support for some new nl80211 commands, to be introduced by future patches. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: add BSS coex IE to TDLS setup framesArik Nemtsov1-0/+15
Add the BSS coex IE in case we support HT40 channels, as mandated by section 8.5.13 in IEEE802.11 2012. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: add supported channels IE during TDLS setupArik Nemtsov1-0/+71
This information element is mandatory in case TDLS channel-switching is to be supported. The channels given are ones supported and allowed to be active in the current regulatory setting. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: retransmit TDLS teardown packet through AP if not ACKedLiad Kaufman1-11/+48
Since the TDLS peer station might not receive the teardown packet (e.g., when in PS), this makes sure the packet is retransmitted - this time through the AP - if the TDLS peer didn't ACK the packet. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-23mac80211: expose TDLS-initiator value to low level driverArik Nemtsov1-2/+6
Some drivers need to know which station is the TDLS link initiator. Expose this value via the mac80211 ieee80211_sta structure. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-09-11mac80211: set network header in TDLS framesArik Nemtsov1-0/+3
Correctly mark the network header location in mac80211-generated TDLS frames. These may be used by lower-level drivers. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-09-05mac80211: add Intel Mobile Communications copyrightJohannes Berg1-0/+1
Our legal structure changed at some point (see wikipedia), but we forgot to immediately switch over to the new copyright notice. For files that we have modified in the time since the change, add the proper copyright notice now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-08-15mac80211: don't duplicate station QoS capability dataJohannes Berg1-2/+1
We currently track the QoS capability twice: for all peer stations in the WLAN_STA_WME flag, and for any clients associated to an AP interface separately for drivers in the sta->sta.wme field. Remove the WLAN_STA_WME flag and track the capability only in the driver-visible field, getting rid of the limitation that the field is only valid in AP mode. Reviewed-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-21mac80211: make sure TDLS teardown packet is sent on timeLiad Kaufman1-0/+11
Since the teardown packet is created while the queues are stopped, it isn't sent immediately, but rather is pending. To be sure that when we flush the queues prior to destroying the station we also send this packet - the tasklet handling pending packets is invoked to flush the packets. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: ArikX Nemtsov <arik@wizery.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-21mac80211: support HT for TDLS stationsArik Nemtsov1-4/+84
Add the HT capabilities and HT operation information elements to TDLS setup packets where appropriate. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-21mac80211: move TDLS data to mgd private partArik Nemtsov1-14/+14
We can only be a station for TDLS connections. Also fix a bug where a delayed work could be left scheduled if the station interface was brought down during TDLS setup. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-21mac80211: add TDLS QoS param IE on setup-confirmArik Nemtsov1-0/+124
When TDLS QoS is supported by the the peer and the local card, add the WMM parameter IE to the setup-confirm frame. Take the QoS settings from the current AP, or if unsupported, use the default values from the specification. This behavior is mandated by IEEE802.11-2012 section 10.22.4. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-21mac80211: add QoS IE during TDLS setup startArik Nemtsov1-0/+7
If QoS is supported by the card, add an appropriate IE to TDLS setup- request and setup-response frames. Consolidate the setting of the WMM info IE across mac80211. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-21mac80211: set TDLS capab to zero on failure framesArik Nemtsov1-4/+12
When sending setup-failure frames, set the capability field to zero, as mandated by the specification (IEEE802.11-2012 8.5.13). Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-21mac80211: avoid adding some IEs on TDLS setup failure packetsArik Nemtsov1-26/+32
Most setup-specific information elements are not to be added when a setup frame is sent with an error status code. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-21mac80211: split extra TDLS IEs in setup framesArik Nemtsov1-7/+70
When building TDLS setup frames, use the IE order mandates in the specification, splitting extra IEs coming from usermode. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-21mac80211: consolidate TDLS IE treatmentArik Nemtsov1-28/+41
Add all information elements for TDLS discovery and setup in the same function. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-21mac80211: fix error path for TDLS setupArik Nemtsov1-6/+10
The patch "8f02e6b mac80211: make sure TDLS peer STA exists during setup" broke TDLS error paths where the STA doesn't exist when sending the error. Fix it by only testing for STA existence during a non-error flow. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-21mac80211: track TDLS initiator internallyArik Nemtsov1-11/+24
Infer the TDLS initiator and track it in mac80211 via a STA flag. This avoids breaking old userspace that doesn't pass it via nl80211 APIs. The only case where userspace will need to pass the initiator is when the STA is removed due to unreachability before a teardown packet is sent. Support for unreachability was only recently added to wpa_supplicant, so it won't be a problem in practice. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: protect TDLS discovery sessionArik Nemtsov1-1/+9
After sending a TDLS discovery-request, we expect a reply to arrive on the AP's channel. We must stay on the channel (no PSM, scan, etc.), since a TDLS setup-response is a direct packet not buffered by the AP. Add a new mac80211 driver callback to allow discovery session protection. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: make sure TDLS peer STA exists during setupArik Nemtsov1-0/+13
Make sure userspace added a TDLS peer station before invoking the transmission of the first setup frame. This ensures packets to the peer won't go through the AP path. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: add API to request TDLS operation from userspaceArik Nemtsov1-0/+17
Write a mac80211 to the cfg80211 API for requesting a userspace TDLS operation. Define TDLS specific reason codes that can be used here. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: implement proper Tx path flushing for TDLSArik Nemtsov1-0/+57
As the spec mandates, flush data in the AP path before transmitting the first setup frame. Data packets transmitted during setup are already dropped in the Tx path. For the teardown flow, flush all packets in the direct path before transmitting the teardown frame. Un-authorize the peer sta after teardown is sent, forcing all subsequent Tx to the peer through the AP. Make sure to flush the queues when disabling the link to get the teardown packet out. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> [adjust to Luca's new quuee API and stop only vif queues] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: split tdls_mgmt functionArik Nemtsov1-23/+55
There are setup/teardown specific actions to be done that accompany the sending of a TDLS management packet. Split the main function to simplify future additions. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: use TDLS initiator in tdls_mgmt operationsArik Nemtsov1-12/+28
The TDLS initiator is set once during link setup. If determines the address ordering in the link identifier IE. Use the value from userspace in order to have a correct teardown packet. With the current code, a teardown from the responder side fails the TDLS MIC check because of a bad link identifier IE. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23cfg80211: pass TDLS initiator in tdls_mgmt operationsArik Nemtsov1-1/+2
The TDLS initiator is set once during link setup. If determines the address ordering in the link identifier IE. Fix dependent drivers - mwifiex and mac80211. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: cleanup TDLS state during failed setupArik Nemtsov1-24/+109
When setting up a TDLS session, register a delayed work to remove the peer if setup times out. Prevent concurrent setups to support this capacity. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-19cfg80211: constify MAC addresses in cfg80211 opsJohannes Berg1-6/+6
This propagates through all the drivers and mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-05mac80211: move TDLS code to another fileArik Nemtsov1-0/+325
With new additions planned, this code is getting too big for cfg.c. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-04 08:29:30 +0000