summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/linux/ieee80211.h39
-rw-r--r--include/linux/nl80211.h36
-rw-r--r--include/net/cfg80211.h59
-rw-r--r--include/net/mac80211.h105
4 files changed, 175 insertions, 64 deletions
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index d62edc7df3ae..aeea282bd2fe 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -1085,12 +1085,12 @@ enum ieee80211_eid {
WLAN_EID_TIM = 5,
WLAN_EID_IBSS_PARAMS = 6,
WLAN_EID_CHALLENGE = 16,
- /* 802.11d */
+
WLAN_EID_COUNTRY = 7,
WLAN_EID_HP_PARAMS = 8,
WLAN_EID_HP_TABLE = 9,
WLAN_EID_REQUEST = 10,
- /* 802.11e */
+
WLAN_EID_QBSS_LOAD = 11,
WLAN_EID_EDCA_PARAM_SET = 12,
WLAN_EID_TSPEC = 13,
@@ -1113,7 +1113,7 @@ enum ieee80211_eid {
WLAN_EID_PREP = 69,
WLAN_EID_PERR = 70,
WLAN_EID_RANN = 49, /* compatible with FreeBSD */
- /* 802.11h */
+
WLAN_EID_PWR_CONSTRAINT = 32,
WLAN_EID_PWR_CAPABILITY = 33,
WLAN_EID_TPC_REQUEST = 34,
@@ -1124,20 +1124,41 @@ enum ieee80211_eid {
WLAN_EID_MEASURE_REPORT = 39,
WLAN_EID_QUIET = 40,
WLAN_EID_IBSS_DFS = 41,
- /* 802.11g */
+
WLAN_EID_ERP_INFO = 42,
WLAN_EID_EXT_SUPP_RATES = 50,
- /* 802.11n */
+
WLAN_EID_HT_CAPABILITY = 45,
WLAN_EID_HT_INFORMATION = 61,
- /* 802.11i */
+
WLAN_EID_RSN = 48,
- WLAN_EID_TIMEOUT_INTERVAL = 56,
- WLAN_EID_MMIE = 76 /* 802.11w */,
+ WLAN_EID_MMIE = 76,
WLAN_EID_WPA = 221,
WLAN_EID_GENERIC = 221,
WLAN_EID_VENDOR_SPECIFIC = 221,
- WLAN_EID_QOS_PARAMETER = 222
+ WLAN_EID_QOS_PARAMETER = 222,
+
+ WLAN_EID_AP_CHAN_REPORT = 51,
+ WLAN_EID_NEIGHBOR_REPORT = 52,
+ WLAN_EID_RCPI = 53,
+ WLAN_EID_BSS_AVG_ACCESS_DELAY = 63,
+ WLAN_EID_ANTENNA_INFO = 64,
+ WLAN_EID_RSNI = 65,
+ WLAN_EID_MEASUREMENT_PILOT_TX_INFO = 66,
+ WLAN_EID_BSS_AVAILABLE_CAPACITY = 67,
+ WLAN_EID_BSS_AC_ACCESS_DELAY = 68,
+ WLAN_EID_RRM_ENABLED_CAPABILITIES = 70,
+ WLAN_EID_MULTIPLE_BSSID = 71,
+
+ WLAN_EID_MOBILITY_DOMAIN = 54,
+ WLAN_EID_FAST_BSS_TRANSITION = 55,
+ WLAN_EID_TIMEOUT_INTERVAL = 56,
+ WLAN_EID_RIC_DATA = 57,
+ WLAN_EID_RIC_DESCRIPTOR = 75,
+
+ WLAN_EID_DSE_REGISTERED_LOCATION = 58,
+ WLAN_EID_SUPPORTED_REGULATORY_CLASSES = 59,
+ WLAN_EID_EXT_CHANSWITCH_ANN = 60,
};
/* Action category code */
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index da8ea2e19273..2bfbe88837ef 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -270,6 +270,31 @@
* @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices
* associated with this wiphy must be down and will follow.
*
+ * @NL80211_CMD_REMAIN_ON_CHANNEL: Request to remain awake on the specified
+ * channel for the specified amount of time. This can be used to do
+ * off-channel operations like transmit a Public Action frame and wait for
+ * a response while being associated to an AP on another channel.
+ * %NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify which
+ * radio is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the
+ * frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be
+ * optionally used to specify additional channel parameters.
+ * %NL80211_ATTR_DURATION is used to specify the duration in milliseconds
+ * to remain on the channel. This command is also used as an event to
+ * notify when the requested duration starts (it may take a while for the
+ * driver to schedule this time due to other concurrent needs for the
+ * radio).
+ * When called, this operation returns a cookie (%NL80211_ATTR_COOKIE)
+ * that will be included with any events pertaining to this request;
+ * the cookie is also used to cancel the request.
+ * @NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL: This command can be used to cancel a
+ * pending remain-on-channel duration if the desired operation has been
+ * completed prior to expiration of the originally requested duration.
+ * %NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify the
+ * radio. The %NL80211_ATTR_COOKIE attribute must be given as well to
+ * uniquely identify the request.
+ * This command is also used as an event to notify when a requested
+ * remain-on-channel duration has expired.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -353,6 +378,9 @@ enum nl80211_commands {
NL80211_CMD_DEL_PMKSA,
NL80211_CMD_FLUSH_PMKSA,
+ NL80211_CMD_REMAIN_ON_CHANNEL,
+ NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -606,6 +634,10 @@ enum nl80211_commands {
* @NL80211_ATTR_MAX_NUM_PMKIDS: maximum number of PMKIDs a firmware can
* cache, a wiphy attribute.
*
+ * @NL80211_ATTR_DURATION: Duration of an operation in milliseconds, u32.
+ *
+ * @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -743,6 +775,10 @@ enum nl80211_attrs {
NL80211_ATTR_PMKID,
NL80211_ATTR_MAX_NUM_PMKIDS,
+ NL80211_ATTR_DURATION,
+
+ NL80211_ATTR_COOKIE,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 542a477a94da..add79930f47d 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -988,6 +988,15 @@ struct cfg80211_pmksa {
*
* @dump_survey: get site survey information.
*
+ * @remain_on_channel: Request the driver to remain awake on the specified
+ * channel for the specified duration to complete an off-channel
+ * operation (e.g., public action frame exchange). When the driver is
+ * ready on the requested channel, it must indicate this with an event
+ * notification by calling cfg80211_ready_on_channel().
+ * @cancel_remain_on_channel: Cancel an on-going remain-on-channel operation.
+ * This allows the operation to be terminated prior to timeout based on
+ * the duration value.
+ *
* @testmode_cmd: run a test mode command
*
* @set_pmksa: Cache a PMKID for a BSSID. This is mostly useful for fullmac
@@ -1123,6 +1132,16 @@ struct cfg80211_ops {
struct cfg80211_pmksa *pmksa);
int (*flush_pmksa)(struct wiphy *wiphy, struct net_device *netdev);
+ int (*remain_on_channel)(struct wiphy *wiphy,
+ struct net_device *dev,
+ struct ieee80211_channel *chan,
+ enum nl80211_channel_type channel_type,
+ unsigned int duration,
+ u64 *cookie);
+ int (*cancel_remain_on_channel)(struct wiphy *wiphy,
+ struct net_device *dev,
+ u64 cookie);
+
/* some temporary stuff to finish wext */
int (*set_power_mgmt)(struct wiphy *wiphy, struct net_device *dev,
bool enabled, int timeout);
@@ -2147,5 +2166,45 @@ void cfg80211_roamed(struct net_device *dev, const u8 *bssid,
void cfg80211_disconnected(struct net_device *dev, u16 reason,
u8 *ie, size_t ie_len, gfp_t gfp);
+/**
+ * cfg80211_ready_on_channel - notification of remain_on_channel start
+ * @dev: network device
+ * @cookie: the request cookie
+ * @chan: The current channel (from remain_on_channel request)
+ * @channel_type: Channel type
+ * @duration: Duration in milliseconds that the driver intents to remain on the
+ * channel
+ * @gfp: allocation flags
+ */
+void cfg80211_ready_on_channel(struct net_device *dev, u64 cookie,
+ struct ieee80211_channel *chan,
+ enum nl80211_channel_type channel_type,
+ unsigned int duration, gfp_t gfp);
+
+/**
+ * cfg80211_remain_on_channel_expired - remain_on_channel duration expired
+ * @dev: network device
+ * @cookie: the request cookie
+ * @chan: The current channel (from remain_on_channel request)
+ * @channel_type: Channel type
+ * @gfp: allocation flags
+ */
+void cfg80211_remain_on_channel_expired(struct net_device *dev,
+ u64 cookie,
+ struct ieee80211_channel *chan,
+ enum nl80211_channel_type channel_type,
+ gfp_t gfp);
+
+
+/**
+ * cfg80211_new_sta - notify userspace about station
+ *
+ * @dev: the netdev
+ * @mac_addr: the station's address
+ * @sinfo: the station information
+ * @gfp: allocation flags
+ */
+void cfg80211_new_sta(struct net_device *dev, const u8 *mac_addr,
+ struct station_info *sinfo, gfp_t gfp);
#endif /* __NET_CFG80211_H */
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 494ac69ff477..f073a2a50574 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -547,7 +547,6 @@ enum mac80211_rx_flags {
* unspecified depending on the hardware capabilities flags
* @IEEE80211_HW_SIGNAL_*
* @noise: noise when receiving this frame, in dBm.
- * @qual: overall signal quality indication, in percent (0-100).
* @antenna: antenna used
* @rate_idx: index of data rate into band's supported rates or MCS index if
* HT rates are use (RX_FLAG_HT)
@@ -559,7 +558,6 @@ struct ieee80211_rx_status {
int freq;
int signal;
int noise;
- int __deprecated qual;
int antenna;
int rate_idx;
int flag;
@@ -702,33 +700,6 @@ static inline bool ieee80211_vif_is_mesh(struct ieee80211_vif *vif)
}
/**
- * struct ieee80211_if_init_conf - initial configuration of an interface
- *
- * @vif: pointer to a driver-use per-interface structure. The pointer
- * itself is also used for various functions including
- * ieee80211_beacon_get() and ieee80211_get_buffered_bc().
- * @type: one of &enum nl80211_iftype constants. Determines the type of
- * added/removed interface.
- * @mac_addr: pointer to MAC address of the interface. This pointer is valid
- * until the interface is removed (i.e. it cannot be used after
- * remove_interface() callback was called for this interface).
- *
- * This structure is used in add_interface() and remove_interface()
- * callbacks of &struct ieee80211_hw.
- *
- * When you allow multiple interfaces to be added to your PHY, take care
- * that the hardware can actually handle multiple MAC addresses. However,
- * also take care that when there's no interface left with mac_addr != %NULL
- * you remove the MAC address from the device to avoid acknowledging packets
- * in pure monitor mode.
- */
-struct ieee80211_if_init_conf {
- enum nl80211_iftype type;
- struct ieee80211_vif *vif;
- void *mac_addr;
-};
-
-/**
* enum ieee80211_key_alg - key algorithm
* @ALG_WEP: WEP40 or WEP104
* @ALG_TKIP: TKIP
@@ -1410,7 +1381,7 @@ enum ieee80211_ampdu_mlme_action {
* When the device is started it should not have a MAC address
* to avoid acknowledging frames before a non-monitor device
* is added.
- * Must be implemented.
+ * Must be implemented and can sleep.
*
* @stop: Called after last netdevice attached to the hardware
* is disabled. This should turn off the hardware (at least
@@ -1418,7 +1389,7 @@ enum ieee80211_ampdu_mlme_action {
* May be called right after add_interface if that rejects
* an interface. If you added any work onto the mac80211 workqueue
* you should ensure to cancel it on this callback.
- * Must be implemented.
+ * Must be implemented and can sleep.
*
* @add_interface: Called when a netdevice attached to the hardware is
* enabled. Because it is not called for monitor mode devices, @start
@@ -1428,7 +1399,7 @@ enum ieee80211_ampdu_mlme_action {
* interface is given in the conf parameter.
* The callback may refuse to add an interface by returning a
* negative error code (which will be seen in userspace.)
- * Must be implemented.
+ * Must be implemented and can sleep.
*
* @remove_interface: Notifies a driver that an interface is going down.
* The @stop callback is called after this if it is the last interface
@@ -1437,19 +1408,20 @@ enum ieee80211_ampdu_mlme_action {
* must be cleared so the device no longer acknowledges packets,
* the mac_addr member of the conf structure is, however, set to the
* MAC address of the device going away.
- * Hence, this callback must be implemented.
+ * Hence, this callback must be implemented. It can sleep.
*
* @config: Handler for configuration requests. IEEE 802.11 code calls this
* function to change hardware configuration, e.g., channel.
* This function should never fail but returns a negative error code
- * if it does.
+ * if it does. The callback can sleep.
*
* @bss_info_changed: Handler for configuration requests related to BSS
* parameters that may vary during BSS's lifespan, and may affect low
* level driver (e.g. assoc/disassoc status, erp parameters).
* This function should not be used if no BSS has been set, unless
* for association indication. The @changed parameter indicates which
- * of the bss parameters has changed when a call is made.
+ * of the bss parameters has changed when a call is made. The callback
+ * can sleep.
*
* @prepare_multicast: Prepare for multicast filter configuration.
* This callback is optional, and its return value is passed
@@ -1457,20 +1429,22 @@ enum ieee80211_ampdu_mlme_action {
*
* @configure_filter: Configure the device's RX filter.
* See the section "Frame filtering" for more information.
- * This callback must be implemented.
+ * This callback must be implemented and can sleep.
*
* @set_tim: Set TIM bit. mac80211 calls this function when a TIM bit
* must be set or cleared for a given STA. Must be atomic.
*
* @set_key: See the section "Hardware crypto acceleration"
- * This callback can sleep, and is only called between add_interface
- * and remove_interface calls, i.e. while the given virtual interface
+ * This callback is only called between add_interface and
+ * remove_interface calls, i.e. while the given virtual interface
* is enabled.
* Returns a negative error code if the key can't be added.
+ * The callback can sleep.
*
* @update_tkip_key: See the section "Hardware crypto acceleration"
* This callback will be called in the context of Rx. Called for drivers
* which set IEEE80211_KEY_FLAG_TKIP_REQ_RX_P1_KEY.
+ * The callback can sleep.
*
* @hw_scan: Ask the hardware to service the scan request, no need to start
* the scan state machine in stack. The scan must honour the channel
@@ -1484,21 +1458,28 @@ enum ieee80211_ampdu_mlme_action {
* When the scan finishes, ieee80211_scan_completed() must be called;
* note that it also must be called when the scan cannot finish due to
* any error unless this callback returned a negative error code.
+ * The callback can sleep.
*
* @sw_scan_start: Notifier function that is called just before a software scan
* is started. Can be NULL, if the driver doesn't need this notification.
+ * The callback can sleep.
*
- * @sw_scan_complete: Notifier function that is called just after a software scan
- * finished. Can be NULL, if the driver doesn't need this notification.
+ * @sw_scan_complete: Notifier function that is called just after a
+ * software scan finished. Can be NULL, if the driver doesn't need
+ * this notification.
+ * The callback can sleep.
*
* @get_stats: Return low-level statistics.
* Returns zero if statistics are available.
+ * The callback can sleep.
*
* @get_tkip_seq: If your device implements TKIP encryption in hardware this
* callback should be provided to read the TKIP transmit IVs (both IV32
* and IV16) for the given key from hardware.
+ * The callback must be atomic.
*
* @set_rts_threshold: Configuration of RTS threshold (if device needs it)
+ * The callback can sleep.
*
* @sta_notify: Notifies low level driver about addition, removal or power
* state transition of an associated station, AP, IBSS/WDS/mesh peer etc.
@@ -1507,30 +1488,36 @@ enum ieee80211_ampdu_mlme_action {
* @conf_tx: Configure TX queue parameters (EDCF (aifs, cw_min, cw_max),
* bursting) for a hardware TX queue.
* Returns a negative error code on failure.
+ * The callback can sleep.
*
* @get_tx_stats: Get statistics of the current TX queue status. This is used
* to get number of currently queued packets (queue length), maximum queue
* size (limit), and total number of packets sent using each TX queue
* (count). The 'stats' pointer points to an array that has hw->queues
* items.
+ * The callback must be atomic.
*
* @get_tsf: Get the current TSF timer value from firmware/hardware. Currently,
* this is only used for IBSS mode BSSID merging and debugging. Is not a
* required function.
+ * The callback can sleep.
*
* @set_tsf: Set the TSF timer to the specified value in the firmware/hardware.
* Currently, this is only used for IBSS mode debugging. Is not a
* required function.
+ * The callback can sleep.
*
* @reset_tsf: Reset the TSF timer and allow firmware/hardware to synchronize
* with other STAs in the IBSS. This is only used in IBSS mode. This
* function is optional if the firmware/hardware takes full care of
* TSF synchronization.
+ * The callback can sleep.
*
* @tx_last_beacon: Determine whether the last IBSS beacon was sent by us.
* This is needed only for IBSS mode and the result of this function is
* used to determine whether to reply to Probe Requests.
* Returns non-zero if this device sent the last beacon.
+ * The callback can sleep.
*
* @ampdu_action: Perform a certain A-MPDU action
* The RA/TID combination determines the destination and TID we want
@@ -1539,21 +1526,28 @@ enum ieee80211_ampdu_mlme_action {
* is the first frame we expect to perform the action on. Notice
* that TX/RX_STOP can pass NULL for this parameter.
* Returns a negative error code on failure.
+ * The callback must be atomic.
*
* @rfkill_poll: Poll rfkill hardware state. If you need this, you also
* need to set wiphy->rfkill_poll to %true before registration,
* and need to call wiphy_rfkill_set_hw_state() in the callback.
+ * The callback can sleep.
*
* @testmode_cmd: Implement a cfg80211 test mode command.
+ * The callback can sleep.
+ *
+ * @flush: Flush all pending frames from the hardware queue, making sure
+ * that the hardware queues are empty. If the parameter @drop is set
+ * to %true, pending frames may be dropped. The callback can sleep.
*/
struct ieee80211_ops {
int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb);
int (*start)(struct ieee80211_hw *hw);
void (*stop)(struct ieee80211_hw *hw);
int (*add_interface)(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf);
+ struct ieee80211_vif *vif);
void (*remove_interface)(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf);
+ struct ieee80211_vif *vif);
int (*config)(struct ieee80211_hw *hw, u32 changed);
void (*bss_info_changed)(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
@@ -1601,6 +1595,7 @@ struct ieee80211_ops {
#ifdef CONFIG_NL80211_TESTMODE
int (*testmode_cmd)(struct ieee80211_hw *hw, void *data, int len);
#endif
+ void (*flush)(struct ieee80211_hw *hw, bool drop);
};
/**
@@ -1840,7 +1835,7 @@ void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw,
/**
* ieee80211_beacon_get_tim - beacon generation function
* @hw: pointer obtained from ieee80211_alloc_hw().
- * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf.
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
* @tim_offset: pointer to variable that will receive the TIM IE offset.
* Set to 0 if invalid (in non-AP modes).
* @tim_length: pointer to variable that will receive the TIM IE length,
@@ -1868,7 +1863,7 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw,
/**
* ieee80211_beacon_get - beacon generation function
* @hw: pointer obtained from ieee80211_alloc_hw().
- * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf.
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
*
* See ieee80211_beacon_get_tim().
*/
@@ -1881,7 +1876,7 @@ static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
/**
* ieee80211_rts_get - RTS frame generation function
* @hw: pointer obtained from ieee80211_alloc_hw().
- * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf.
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
* @frame: pointer to the frame that is going to be protected by the RTS.
* @frame_len: the frame length (in octets).
* @frame_txctl: &struct ieee80211_tx_info of the frame.
@@ -1900,7 +1895,7 @@ void ieee80211_rts_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
/**
* ieee80211_rts_duration - Get the duration field for an RTS frame
* @hw: pointer obtained from ieee80211_alloc_hw().
- * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf.
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
* @frame_len: the length of the frame that is going to be protected by the RTS.
* @frame_txctl: &struct ieee80211_tx_info of the frame.
*
@@ -1915,7 +1910,7 @@ __le16 ieee80211_rts_duration(struct ieee80211_hw *hw,
/**
* ieee80211_ctstoself_get - CTS-to-self frame generation function
* @hw: pointer obtained from ieee80211_alloc_hw().
- * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf.
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
* @frame: pointer to the frame that is going to be protected by the CTS-to-self.
* @frame_len: the frame length (in octets).
* @frame_txctl: &struct ieee80211_tx_info of the frame.
@@ -1935,7 +1930,7 @@ void ieee80211_ctstoself_get(struct ieee80211_hw *hw,
/**
* ieee80211_ctstoself_duration - Get the duration field for a CTS-to-self frame
* @hw: pointer obtained from ieee80211_alloc_hw().
- * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf.
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
* @frame_len: the length of the frame that is going to be protected by the CTS-to-self.
* @frame_txctl: &struct ieee80211_tx_info of the frame.
*
@@ -1951,7 +1946,7 @@ __le16 ieee80211_ctstoself_duration(struct ieee80211_hw *hw,
/**
* ieee80211_generic_frame_duration - Calculate the duration field for a frame
* @hw: pointer obtained from ieee80211_alloc_hw().
- * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf.
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
* @frame_len: the length of the frame.
* @rate: the rate at which the frame is going to be transmitted.
*
@@ -1966,7 +1961,7 @@ __le16 ieee80211_generic_frame_duration(struct ieee80211_hw *hw,
/**
* ieee80211_get_buffered_bc - accessing buffered broadcast and multicast frames
* @hw: pointer as obtained from ieee80211_alloc_hw().
- * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf.
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
*
* Function for accessing buffered broadcast and multicast frames. If
* hardware/firmware does not implement buffering of broadcast/multicast
@@ -2134,7 +2129,7 @@ int ieee80211_start_tx_ba_session(struct ieee80211_sta *sta, u16 tid);
/**
* ieee80211_start_tx_ba_cb - low level driver ready to aggregate.
- * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback
* @ra: receiver address of the BA session recipient.
* @tid: the TID to BA on.
*
@@ -2145,7 +2140,7 @@ void ieee80211_start_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u16 tid);
/**
* ieee80211_start_tx_ba_cb_irqsafe - low level driver ready to aggregate.
- * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback
* @ra: receiver address of the BA session recipient.
* @tid: the TID to BA on.
*
@@ -2173,7 +2168,7 @@ int ieee80211_stop_tx_ba_session(struct ieee80211_sta *sta, u16 tid,
/**
* ieee80211_stop_tx_ba_cb - low level driver ready to stop aggregate.
- * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback
* @ra: receiver address of the BA session recipient.
* @tid: the desired TID to BA on.
*
@@ -2184,7 +2179,7 @@ void ieee80211_stop_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u8 tid);
/**
* ieee80211_stop_tx_ba_cb_irqsafe - low level driver ready to stop aggregate.
- * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback
* @ra: receiver address of the BA session recipient.
* @tid: the desired TID to BA on.
*
@@ -2263,7 +2258,7 @@ void ieee80211_sta_block_awake(struct ieee80211_hw *hw,
/**
* ieee80211_beacon_loss - inform hardware does not receive beacons
*
- * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf.
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
*
* When beacon filtering is enabled with IEEE80211_HW_BEACON_FILTERING and
* IEEE80211_CONF_PS is set, the driver needs to inform whenever the