diff options
Diffstat (limited to 'include/net/cfg80211.h')
-rw-r--r-- | include/net/cfg80211.h | 275 |
1 files changed, 212 insertions, 63 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index f856e5a746fa..e46c437944f7 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -109,6 +109,13 @@ enum ieee80211_band { * channel as the control or any of the secondary channels. * This may be due to the driver or due to regulatory bandwidth * restrictions. + * @IEEE80211_CHAN_INDOOR_ONLY: see %NL80211_FREQUENCY_ATTR_INDOOR_ONLY + * @IEEE80211_CHAN_GO_CONCURRENT: see %NL80211_FREQUENCY_ATTR_GO_CONCURRENT + * @IEEE80211_CHAN_NO_20MHZ: 20 MHz bandwidth is not permitted + * on this channel. + * @IEEE80211_CHAN_NO_10MHZ: 10 MHz bandwidth is not permitted + * on this channel. + * */ enum ieee80211_channel_flags { IEEE80211_CHAN_DISABLED = 1<<0, @@ -120,6 +127,10 @@ enum ieee80211_channel_flags { IEEE80211_CHAN_NO_OFDM = 1<<6, IEEE80211_CHAN_NO_80MHZ = 1<<7, IEEE80211_CHAN_NO_160MHZ = 1<<8, + IEEE80211_CHAN_INDOOR_ONLY = 1<<9, + IEEE80211_CHAN_GO_CONCURRENT = 1<<10, + IEEE80211_CHAN_NO_20MHZ = 1<<11, + IEEE80211_CHAN_NO_10MHZ = 1<<12, }; #define IEEE80211_CHAN_NO_HT40 \ @@ -330,8 +341,8 @@ struct vif_params { * @seq_len: length of @seq. */ struct key_params { - u8 *key; - u8 *seq; + const u8 *key; + const u8 *seq; int key_len; int seq_len; u32 cipher; @@ -441,10 +452,13 @@ bool cfg80211_chandef_usable(struct wiphy *wiphy, * cfg80211_chandef_dfs_required - checks if radar detection is required * @wiphy: the wiphy to validate against * @chandef: the channel definition to check - * Return: 1 if radar detection is required, 0 if it is not, < 0 on error + * @iftype: the interface type as specified in &enum nl80211_iftype + * Returns: + * 1 if radar detection is required, 0 if it is not, < 0 on error */ int cfg80211_chandef_dfs_required(struct wiphy *wiphy, - const struct cfg80211_chan_def *chandef); + const struct cfg80211_chan_def *chandef, + enum nl80211_iftype iftype); /** * ieee80211_chandef_rate_flags - returns rate flags for a channel @@ -654,7 +668,6 @@ struct cfg80211_acl_data { * @p2p_opp_ps: P2P opportunistic PS * @acl: ACL configuration used by the drivers which has support for * MAC address based access control - * @radar_required: set if radar detection is required */ struct cfg80211_ap_settings { struct cfg80211_chan_def chandef; @@ -672,7 +685,6 @@ struct cfg80211_ap_settings { u8 p2p_ctwindow; bool p2p_opp_ps; const struct cfg80211_acl_data *acl; - bool radar_required; }; /** @@ -682,8 +694,10 @@ struct cfg80211_ap_settings { * * @chandef: defines the channel to use after the switch * @beacon_csa: beacon data while performing the switch - * @counter_offset_beacon: offset for the counter within the beacon (tail) - * @counter_offset_presp: offset for the counter within the probe response + * @counter_offsets_beacon: offsets of the counters within the beacon (tail) + * @counter_offsets_presp: offsets of the counters within the probe response + * @n_counter_offsets_beacon: number of csa counters the beacon (tail) + * @n_counter_offsets_presp: number of csa counters in the probe response * @beacon_after: beacon data to be used on the new channel * @radar_required: whether radar detection is required on the new channel * @block_tx: whether transmissions should be blocked while changing @@ -692,7 +706,10 @@ struct cfg80211_ap_settings { struct cfg80211_csa_settings { struct cfg80211_chan_def chandef; struct cfg80211_beacon_data beacon_csa; - u16 counter_offset_beacon, counter_offset_presp; + const u16 *counter_offsets_beacon; + const u16 *counter_offsets_presp; + unsigned int n_counter_offsets_beacon; + unsigned int n_counter_offsets_presp; struct cfg80211_beacon_data beacon_after; bool radar_required; bool block_tx; @@ -856,36 +873,38 @@ int cfg80211_check_station_change(struct wiphy *wiphy, * @STATION_INFO_NONPEER_PM: @nonpeer_pm filled * @STATION_INFO_CHAIN_SIGNAL: @chain_signal filled * @STATION_INFO_CHAIN_SIGNAL_AVG: @chain_signal_avg filled + * @STATION_INFO_EXPECTED_THROUGHPUT: @expected_throughput filled */ enum station_info_flags { - STATION_INFO_INACTIVE_TIME = 1<<0, - STATION_INFO_RX_BYTES = 1<<1, - STATION_INFO_TX_BYTES = 1<<2, - STATION_INFO_LLID = 1<<3, - STATION_INFO_PLID = 1<<4, - STATION_INFO_PLINK_STATE = 1<<5, - STATION_INFO_SIGNAL = 1<<6, - STATION_INFO_TX_BITRATE = 1<<7, - STATION_INFO_RX_PACKETS = 1<<8, - STATION_INFO_TX_PACKETS = 1<<9, - STATION_INFO_TX_RETRIES = 1<<10, - STATION_INFO_TX_FAILED = 1<<11, - STATION_INFO_RX_DROP_MISC = 1<<12, - STATION_INFO_SIGNAL_AVG = 1<<13, - STATION_INFO_RX_BITRATE = 1<<14, - STATION_INFO_BSS_PARAM = 1<<15, - STATION_INFO_CONNECTED_TIME = 1<<16, - STATION_INFO_ASSOC_REQ_IES = 1<<17, - STATION_INFO_STA_FLAGS = 1<<18, - STATION_INFO_BEACON_LOSS_COUNT = 1<<19, - STATION_INFO_T_OFFSET = 1<<20, - STATION_INFO_LOCAL_PM = 1<<21, - STATION_INFO_PEER_PM = 1<<22, - STATION_INFO_NONPEER_PM = 1<<23, - STATION_INFO_RX_BYTES64 = 1<<24, - STATION_INFO_TX_BYTES64 = 1<<25, - STATION_INFO_CHAIN_SIGNAL = 1<<26, - STATION_INFO_CHAIN_SIGNAL_AVG = 1<<27, + STATION_INFO_INACTIVE_TIME = BIT(0), + STATION_INFO_RX_BYTES = BIT(1), + STATION_INFO_TX_BYTES = BIT(2), + STATION_INFO_LLID = BIT(3), + STATION_INFO_PLID = BIT(4), + STATION_INFO_PLINK_STATE = BIT(5), + STATION_INFO_SIGNAL = BIT(6), + STATION_INFO_TX_BITRATE = BIT(7), + STATION_INFO_RX_PACKETS = BIT(8), + STATION_INFO_TX_PACKETS = BIT(9), + STATION_INFO_TX_RETRIES = BIT(10), + STATION_INFO_TX_FAILED = BIT(11), + STATION_INFO_RX_DROP_MISC = BIT(12), + STATION_INFO_SIGNAL_AVG = BIT(13), + STATION_INFO_RX_BITRATE = BIT(14), + STATION_INFO_BSS_PARAM = BIT(15), + STATION_INFO_CONNECTED_TIME = BIT(16), + STATION_INFO_ASSOC_REQ_IES = BIT(17), + STATION_INFO_STA_FLAGS = BIT(18), + STATION_INFO_BEACON_LOSS_COUNT = BIT(19), + STATION_INFO_T_OFFSET = BIT(20), + STATION_INFO_LOCAL_PM = BIT(21), + STATION_INFO_PEER_PM = BIT(22), + STATION_INFO_NONPEER_PM = BIT(23), + STATION_INFO_RX_BYTES64 = BIT(24), + STATION_INFO_TX_BYTES64 = BIT(25), + STATION_INFO_CHAIN_SIGNAL = BIT(26), + STATION_INFO_CHAIN_SIGNAL_AVG = BIT(27), + STATION_INFO_EXPECTED_THROUGHPUT = BIT(28), }; /** @@ -1007,6 +1026,8 @@ struct sta_bss_parameters { * @local_pm: local mesh STA power save mode * @peer_pm: peer mesh STA power save mode * @nonpeer_pm: non-peer mesh STA power save mode + * @expected_throughput: expected throughput in kbps (including 802.11 headers) + * towards this station. */ struct station_info { u32 filled; @@ -1045,6 +1066,8 @@ struct station_info { enum nl80211_mesh_power_mode peer_pm; enum nl80211_mesh_power_mode nonpeer_pm; + u32 expected_throughput; + /* * Note: Add a new enum station_info_flags value for each new field and * use it to check which fields are initialized. @@ -1052,6 +1075,19 @@ struct station_info { }; /** + * cfg80211_get_station - retrieve information about a given station + * @dev: the device where the station is supposed to be connected to + * @mac_addr: the mac address of the station of interest + * @sinfo: pointer to the structure to fill with the information + * + * Returns 0 on success and sinfo is filled with the available information + * otherwise returns a negative error code and the content of sinfo has to be + * considered undefined. + */ +int cfg80211_get_station(struct net_device *dev, const u8 *mac_addr, + struct station_info *sinfo); + +/** * enum monitor_flags - monitor flags * * Monitor interface configuration flags. Note that these must be the bits @@ -1152,7 +1188,7 @@ struct bss_parameters { int use_cts_prot; int use_short_preamble; int use_short_slot_time; - u8 *basic_rates; + const u8 *basic_rates; u8 basic_rates_len; int ap_isolate; int ht_opmode; @@ -1682,10 +1718,10 @@ struct cfg80211_disassoc_request { * @ht_capa_mask: The bits of ht_capa which are to be used. */ struct cfg80211_ibss_params { - u8 *ssid; - u8 *bssid; + const u8 *ssid; + const u8 *bssid; struct cfg80211_chan_def chandef; - u8 *ie; + const u8 *ie; u8 ssid_len, ie_len; u16 beacon_interval; u32 basic_rates; @@ -1794,8 +1830,8 @@ struct cfg80211_bitrate_mask { * @pmkid: The PMK material itself. */ struct cfg80211_pmksa { - u8 *bssid; - u8 *pmkid; + const u8 *bssid; + const u8 *pmkid; }; /** @@ -1810,7 +1846,7 @@ struct cfg80211_pmksa { * memory, free @mask only! */ struct cfg80211_pkt_pattern { - u8 *mask, *pattern; + const u8 *mask, *pattern; int pattern_len; int pkt_offset; }; @@ -1974,6 +2010,8 @@ struct cfg80211_update_ft_ies_params { * @len: buffer length * @no_cck: don't use cck rates for this frame * @dont_wait_for_ack: tells the low level not to wait for an ack + * @n_csa_offsets: length of csa_offsets array + * @csa_offsets: array of all the csa offsets in the frame */ struct cfg80211_mgmt_tx_params { struct ieee80211_channel *chan; @@ -1983,6 +2021,8 @@ struct cfg80211_mgmt_tx_params { size_t len; bool no_cck; bool dont_wait_for_ack; + int n_csa_offsets; + const u16 *csa_offsets; }; /** @@ -2278,6 +2318,10 @@ struct cfg80211_qos_map { * @channel_switch: initiate channel-switch procedure (with CSA) * * @set_qos_map: Set QoS mapping information to the driver + * + * @set_ap_chanwidth: Set the AP (including P2P GO) mode channel width for the + * given interface This is used e.g. for dynamic HT 20/40 MHz channel width + * changes during the lifetime of the BSS. */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); @@ -2320,28 +2364,29 @@ struct cfg80211_ops { int (*add_station)(struct wiphy *wiphy, struct net_device *dev, - u8 *mac, struct station_parameters *params); + const u8 *mac, + struct station_parameters *params); int (*del_station)(struct wiphy *wiphy, struct net_device *dev, - u8 *mac); + const u8 *mac); int (*change_station)(struct wiphy *wiphy, struct net_device *dev, - u8 *mac, struct station_parameters *params); + const u8 *mac, + struct station_parameters *params); int (*get_station)(struct wiphy *wiphy, struct net_device *dev, - u8 *mac, struct station_info *sinfo); + const u8 *mac, struct station_info *sinfo); int (*dump_station)(struct wiphy *wiphy, struct net_device *dev, - int idx, u8 *mac, struct station_info *sinfo); + int idx, u8 *mac, struct station_info *sinfo); int (*add_mpath)(struct wiphy *wiphy, struct net_device *dev, - u8 *dst, u8 *next_hop); + const u8 *dst, const u8 *next_hop); int (*del_mpath)(struct wiphy *wiphy, struct net_device *dev, - u8 *dst); + const u8 *dst); int (*change_mpath)(struct wiphy *wiphy, struct net_device *dev, - u8 *dst, u8 *next_hop); + const u8 *dst, const u8 *next_hop); int (*get_mpath)(struct wiphy *wiphy, struct net_device *dev, - u8 *dst, u8 *next_hop, - struct mpath_info *pinfo); + u8 *dst, u8 *next_hop, struct mpath_info *pinfo); int (*dump_mpath)(struct wiphy *wiphy, struct net_device *dev, - int idx, u8 *dst, u8 *next_hop, - struct mpath_info *pinfo); + int idx, u8 *dst, u8 *next_hop, + struct mpath_info *pinfo); int (*get_mesh_config)(struct wiphy *wiphy, struct net_device *dev, struct mesh_config *conf); @@ -2471,11 +2516,11 @@ struct cfg80211_ops { struct cfg80211_gtk_rekey_data *data); int (*tdls_mgmt)(struct wiphy *wiphy, struct net_device *dev, - u8 *peer, u8 action_code, u8 dialog_token, + const u8 *peer, u8 action_code, u8 dialog_token, u16 status_code, u32 peer_capability, const u8 *buf, size_t len); int (*tdls_oper)(struct wiphy *wiphy, struct net_device *dev, - u8 *peer, enum nl80211_tdls_operation oper); + const u8 *peer, enum nl80211_tdls_operation oper); int (*probe_client)(struct wiphy *wiphy, struct net_device *dev, const u8 *peer, u64 *cookie); @@ -2521,9 +2566,13 @@ struct cfg80211_ops { int (*channel_switch)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_csa_settings *params); + int (*set_qos_map)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_qos_map *qos_map); + + int (*set_ap_chanwidth)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_chan_def *chandef); }; /* @@ -2618,6 +2667,7 @@ struct ieee80211_iface_limit { * between infrastructure and AP types must match. This is required * only in special cases. * @radar_detect_widths: bitmap of channel widths supported for radar detection + * @radar_detect_regions: bitmap of regions supported for radar detection * * With this structure the driver can describe which interface * combinations it supports concurrently. @@ -2675,6 +2725,7 @@ struct ieee80211_iface_combination { u8 n_limits; bool beacon_int_infra_match; u8 radar_detect_widths; + u8 radar_detect_regions; }; struct ieee80211_txrx_stypes { @@ -2905,6 +2956,17 @@ struct wiphy_vendor_command { * (including P2P GO) or 0 to indicate no such limit is advertised. The * driver is allowed to advertise a theoretical limit that it can reach in * some cases, but may not always reach. + * + * @max_num_csa_counters: Number of supported csa_counters in beacons + * and probe responses. This value should be set if the driver + * wishes to limit the number of csa counters. Default (0) means + * infinite. + * @max_adj_channel_rssi_comp: max offset of between the channel on which the + * frame was sent and the channel on which the frame was heard for which + * the reported rssi is still valid. If a driver is able to compensate the + * low rssi when a frame is heard on different channel, then it should set + * this variable to the maximal offset for which it can compensate. + * This value should be set in MHz. */ struct wiphy { /* assign these fields before you register the wiphy */ @@ -3022,6 +3084,9 @@ struct wiphy { u16 max_ap_assoc_sta; + u8 max_num_csa_counters; + u8 max_adj_channel_rssi_comp; + char priv[0] __aligned(NETDEV_ALIGN); }; @@ -3194,6 +3259,7 @@ struct cfg80211_cached_keys; * @ibss_dfs_possible: (private) IBSS may change to a DFS channel * @event_list: (private) list for internal event processing * @event_lock: (private) lock for event list + * @owner_nlportid: (private) owner socket port ID */ struct wireless_dev { struct wiphy *wiphy; @@ -3241,13 +3307,15 @@ struct wireless_dev { unsigned long cac_start_time; unsigned int cac_time_ms; + u32 owner_nlportid; + #ifdef CONFIG_CFG80211_WEXT /* wext data */ struct { struct cfg80211_ibss_params ibss; struct cfg80211_connect_params connect; struct cfg80211_cached_keys *keys; - u8 *ie; + const u8 *ie; size_t ie_len; u8 bssid[ETH_ALEN], prev_bssid[ETH_ALEN]; u8 ssid[IEEE80211_MAX_SSID_LEN]; @@ -3488,7 +3556,8 @@ int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr, * Return: 0 on success, or a negative error code. */ int ieee80211_data_from_8023(struct sk_buff *skb, const u8 *addr, - enum nl80211_iftype iftype, u8 *bssid, bool qos); + enum nl80211_iftype iftype, const u8 *bssid, + bool qos); /** * ieee80211_amsdu_to_8023s - decode an IEEE 802.11n A-MSDU frame @@ -3600,7 +3669,7 @@ int regulatory_hint(struct wiphy *wiphy, const char *alpha2); * default channel settings will be disregarded. If no rule is found for a * channel on the regulatory domain the channel will be disabled. * Drivers using this for a wiphy should also set the wiphy flag - * WIPHY_FLAG_CUSTOM_REGULATORY or cfg80211 will set it for the wiphy + * REGULATORY_CUSTOM_REG or cfg80211 will set it for the wiphy * that called this helper. */ void wiphy_apply_custom_regulatory(struct wiphy *wiphy, @@ -4289,7 +4358,7 @@ void cfg80211_roamed_bss(struct net_device *dev, struct cfg80211_bss *bss, * and not try to connect to any AP any more. */ void cfg80211_disconnected(struct net_device *dev, u16 reason, - u8 *ie, size_t ie_len, gfp_t gfp); + const u8 *ie, size_t ie_len, gfp_t gfp); /** * cfg80211_ready_on_channel - notification of remain_on_channel start @@ -4543,12 +4612,14 @@ void cfg80211_report_obss_beacon(struct wiphy *wiphy, * cfg80211_reg_can_beacon - check if beaconing is allowed * @wiphy: the wiphy * @chandef: the channel definition + * @iftype: interface type * * Return: %true if there is no secondary channel or the secondary channel(s) * can be used for beaconing (i.e. is not a radar channel etc.) */ bool cfg80211_reg_can_beacon(struct wiphy *wiphy, - struct cfg80211_chan_def *chandef); + struct cfg80211_chan_def *chandef, + enum nl80211_iftype iftype); /* * cfg80211_ch_switch_notify - update wdev channel and notify userspace @@ -4694,6 +4765,84 @@ void cfg80211_crit_proto_stopped(struct wireless_dev *wdev, gfp_t gfp); */ unsigned int ieee80211_get_num_supported_channels(struct wiphy *wiphy); +/** + * cfg80211_check_combinations - check interface combinations + * + * @wiphy: the wiphy + * @num_different_channels: the number of different channels we want + * to use for verification + * @radar_detect: a bitmap where each bit corresponds to a channel + * width where radar detection is needed, as in the definition of + * &struct ieee80211_iface_combination.@radar_detect_widths + * @iftype_num: array with the numbers of interfaces of each interface + * type. The index is the interface type as specified in &enum + * nl80211_iftype. + * + * This function can be called by the driver to check whether a + * combination of interfaces and their types are allowed according to + * the interface combinations. + */ +int cfg80211_check_combinations(struct wiphy *wiphy, + const int num_different_channels, + const u8 radar_detect, + const int iftype_num[NUM_NL80211_IFTYPES]); + +/** + * cfg80211_iter_combinations - iterate over matching combinations + * + * @wiphy: the wiphy + * @num_different_channels: the number of different channels we want + * to use for verification + * @radar_detect: a bitmap where each bit corresponds to a channel + * width where radar detection is needed, as in the definition of + * &struct ieee80211_iface_combination.@radar_detect_widths + * @iftype_num: array with the numbers of interfaces of each interface + * type. The index is the interface type as specified in &enum + * nl80211_iftype. + * @iter: function to call for each matching combination + * @data: pointer to pass to iter function + * + * This function can be called by the driver to check what possible + * combinations it fits in at a given moment, e.g. for channel switching + * purposes. + */ +int cfg80211_iter_combinations(struct wiphy *wiphy, + const int num_different_channels, + const u8 radar_detect, + const int iftype_num[NUM_NL80211_IFTYPES], + void (*iter)(const struct ieee80211_iface_combination *c, + void *data), + void *data); + +/* + * cfg80211_stop_iface - trigger interface disconnection + * + * @wiphy: the wiphy + * @wdev: wireless device + * @gfp: context flags + * + * Trigger interface to be stopped as if AP was stopped, IBSS/mesh left, STA + * disconnected. + * + * Note: This doesn't need any locks and is asynchronous. + */ +void cfg80211_stop_iface(struct wiphy *wiphy, struct wireless_dev *wdev, + gfp_t gfp); + +/** + * cfg80211_shutdown_all_interfaces - shut down all interfaces for a wiphy + * @wiphy: the wiphy to shut down + * + * This function shuts down all interfaces belonging to this wiphy by + * calling dev_close() (and treating non-netdev interfaces as needed). + * It shouldn't really be used unless there are some fatal device errors + * that really can't be recovered in any other way. + * + * Callers must hold the RTNL and be able to deal with callbacks into + * the driver while the function is running. + */ +void cfg80211_shutdown_all_interfaces(struct wiphy *wiphy); + /* Logging, debugging and troubleshooting/diagnostic helpers. */ /* wiphy_printk helpers, similar to dev_printk */ |