diff options
49 files changed, 1834 insertions, 1190 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 0fbde71a1297..fd3ecedc084d 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -3492,11 +3492,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted. default x2apic cluster mode on platforms supporting x2apic. - x86_mrst_timer= [X86-32,APBT] - Choose timer option for x86 Moorestown MID platform. + x86_intel_mid_timer= [X86-32,APBT] + Choose timer option for x86 Intel MID platform. Two valid options are apbt timer only and lapic timer plus one apbt timer for broadcast timer. - x86_mrst_timer=apbt_only | lapic_and_apbt + x86_intel_mid_timer=apbt_only | lapic_and_apbt xen_emul_unplug= [HW,X86,XEN] Unplug Xen emulated devices diff --git a/arch/x86/include/asm/intel-mid.h b/arch/x86/include/asm/intel-mid.h new file mode 100644 index 000000000000..459769d39263 --- /dev/null +++ b/arch/x86/include/asm/intel-mid.h @@ -0,0 +1,113 @@ +/* + * intel-mid.h: Intel MID specific setup code + * + * (C) Copyright 2009 Intel Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ +#ifndef _ASM_X86_INTEL_MID_H +#define _ASM_X86_INTEL_MID_H + +#include <linux/sfi.h> +#include <linux/platform_device.h> + +extern int intel_mid_pci_init(void); +extern int get_gpio_by_name(const char *name); +extern void intel_scu_device_register(struct platform_device *pdev); +extern int __init sfi_parse_mrtc(struct sfi_table_header *table); +extern int __init sfi_parse_mtmr(struct sfi_table_header *table); +extern int sfi_mrtc_num; +extern struct sfi_rtc_table_entry sfi_mrtc_array[]; + +/* + * Here defines the array of devices platform data that IAFW would export + * through SFI "DEVS" table, we use name and type to match the device and + * its platform data. + */ +struct devs_id { + char name[SFI_NAME_LEN + 1]; + u8 type; + u8 delay; + void *(*get_platform_data)(void *info); + /* Custom handler for devices */ + void (*device_handler)(struct sfi_device_table_entry *pentry, + struct devs_id *dev); +}; + +#define sfi_device(i) \ + static const struct devs_id *const __intel_mid_sfi_##i##_dev __used \ + __attribute__((__section__(".x86_intel_mid_dev.init"))) = &i + +/* + * Medfield is the follow-up of Moorestown, it combines two chip solution into + * one. Other than that it also added always-on and constant tsc and lapic + * timers. Medfield is the platform name, and the chip name is called Penwell + * we treat Medfield/Penwell as a variant of Moorestown. Penwell can be + * identified via MSRs. + */ +enum intel_mid_cpu_type { + /* 1 was Moorestown */ + INTEL_MID_CPU_CHIP_PENWELL = 2, +}; + +extern enum intel_mid_cpu_type __intel_mid_cpu_chip; + +#ifdef CONFIG_X86_INTEL_MID + +static inline enum intel_mid_cpu_type intel_mid_identify_cpu(void) +{ + return __intel_mid_cpu_chip; +} + +static inline bool intel_mid_has_msic(void) +{ + return (intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_PENWELL); +} + +#else /* !CONFIG_X86_INTEL_MID */ + +#define intel_mid_identify_cpu() (0) +#define intel_mid_has_msic() (0) + +#endif /* !CONFIG_X86_INTEL_MID */ + +enum intel_mid_timer_options { + INTEL_MID_TIMER_DEFAULT, + INTEL_MID_TIMER_APBT_ONLY, + INTEL_MID_TIMER_LAPIC_APBT, +}; + +extern enum intel_mid_timer_options intel_mid_timer_options; + +/* + * Penwell uses spread spectrum clock, so the freq number is not exactly + * the same as reported by MSR based on SDM. + */ +#define PENWELL_FSB_FREQ_83SKU 83200 +#define PENWELL_FSB_FREQ_100SKU 99840 + +#define SFI_MTMR_MAX_NUM 8 +#define SFI_MRTC_MAX 8 + +extern struct console early_mrst_console; +extern void mrst_early_console_init(void); + +extern struct console early_hsu_console; +extern void hsu_early_console_init(const char *); + +extern void intel_scu_devices_create(void); +extern void intel_scu_devices_destroy(void); + +/* VRTC timer */ +#define MRST_VRTC_MAP_SZ (1024) +/*#define MRST_VRTC_PGOFFSET (0xc00) */ + +extern void intel_mid_rtc_init(void); + +/* the offset for the mapping of global gpio pin to irq */ +#define INTEL_MID_IRQ_OFFSET 0x100 + +#endif /* _ASM_X86_INTEL_MID_H */ diff --git a/arch/x86/include/asm/mrst-vrtc.h b/arch/x86/include/asm/intel_mid_vrtc.h index 1e69a75412a4..86ff4685c409 100644 --- a/arch/x86/include/asm/mrst-vrtc.h +++ b/arch/x86/include/asm/intel_mid_vrtc.h @@ -1,5 +1,5 @@ -#ifndef _MRST_VRTC_H -#define _MRST_VRTC_H +#ifndef _INTEL_MID_VRTC_H +#define _INTEL_MID_VRTC_H extern unsigned char vrtc_cmos_read(unsigned char reg); extern void vrtc_cmos_write(unsigned char val, unsigned char reg); diff --git a/arch/x86/include/asm/mrst.h b/arch/x86/include/asm/mrst.h deleted file mode 100644 index fc18bf3ce7c8..000000000000 --- a/arch/x86/include/asm/mrst.h +++ /dev/null @@ -1,81 +0,0 @@ -/* - * mrst.h: Intel Moorestown platform specific setup code - * - * (C) Copyright 2009 Intel Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; version 2 - * of the License. - */ -#ifndef _ASM_X86_MRST_H -#define _ASM_X86_MRST_H - -#include <linux/sfi.h> - -extern int pci_mrst_init(void); -extern int __init sfi_parse_mrtc(struct sfi_table_header *table); -extern int sfi_mrtc_num; -extern struct sfi_rtc_table_entry sfi_mrtc_array[]; - -/* - * Medfield is the follow-up of Moorestown, it combines two chip solution into - * one. Other than that it also added always-on and constant tsc and lapic - * timers. Medfield is the platform name, and the chip name is called Penwell - * we treat Medfield/Penwell as a variant of Moorestown. Penwell can be - * identified via MSRs. - */ -enum mrst_cpu_type { - /* 1 was Moorestown */ - MRST_CPU_CHIP_PENWELL = 2, -}; - -extern enum mrst_cpu_type __mrst_cpu_chip; - -#ifdef CONFIG_X86_INTEL_MID - -static inline enum mrst_cpu_type mrst_identify_cpu(void) -{ - return __mrst_cpu_chip; -} - -#else /* !CONFIG_X86_INTEL_MID */ - -#define mrst_identify_cpu() (0) - -#endif /* !CONFIG_X86_INTEL_MID */ - -enum mrst_timer_options { - MRST_TIMER_DEFAULT, - MRST_TIMER_APBT_ONLY, - MRST_TIMER_LAPIC_APBT, -}; - -extern enum mrst_timer_options mrst_timer_options; - -/* - * Penwell uses spread spectrum clock, so the freq number is not exactly - * the same as reported by MSR based on SDM. - */ -#define PENWELL_FSB_FREQ_83SKU 83200 -#define PENWELL_FSB_FREQ_100SKU 99840 - -#define SFI_MTMR_MAX_NUM 8 -#define SFI_MRTC_MAX 8 - -extern struct console early_mrst_console; -extern void mrst_early_console_init(void); - -extern struct console early_hsu_console; -extern void hsu_early_console_init(const char *); - -extern void intel_scu_devices_create(void); -extern void intel_scu_devices_destroy(void); - -/* VRTC timer */ -#define MRST_VRTC_MAP_SZ (1024) -/*#define MRST_VRTC_PGOFFSET (0xc00) */ - -extern void mrst_rtc_init(void); - -#endif /* _ASM_X86_MRST_H */ diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h index 347555492dad..59bcf4e22418 100644 --- a/arch/x86/include/asm/setup.h +++ b/arch/x86/include/asm/setup.h @@ -51,9 +51,9 @@ extern void i386_reserve_resources(void); extern void setup_default_timer_irq(void); #ifdef CONFIG_X86_INTEL_MID -extern void x86_mrst_early_setup(void); +extern void x86_intel_mid_early_setup(void); #else -static inline void x86_mrst_early_setup(void) { } +static inline void x86_intel_mid_early_setup(void) { } #endif #ifdef CONFIG_X86_INTEL_CE diff --git a/arch/x86/include/uapi/asm/bootparam.h b/arch/x86/include/uapi/asm/bootparam.h index c15ddaf90710..9c3733c5f8f7 100644 --- a/arch/x86/include/uapi/asm/bootparam.h +++ b/arch/x86/include/uapi/asm/bootparam.h @@ -158,7 +158,7 @@ enum { X86_SUBARCH_PC = 0, X86_SUBARCH_LGUEST, X86_SUBARCH_XEN, - X86_SUBARCH_MRST, + X86_SUBARCH_INTEL_MID, X86_SUBARCH_CE4100, X86_NR_SUBARCHS, }; diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c index c9876efecafb..af5b08ab3b71 100644 --- a/arch/x86/kernel/apb_timer.c +++ b/arch/x86/kernel/apb_timer.c @@ -40,7 +40,7 @@ #include <asm/fixmap.h> #include <asm/apb_timer.h> -#include <asm/mrst.h> +#include <asm/intel-mid.h> #include <asm/time.h> #define APBT_CLOCKEVENT_RATING 110 @@ -157,13 +157,13 @@ static int __init apbt_clockevent_register(void) adev->num = smp_processor_id(); adev->timer = dw_apb_clockevent_init(smp_processor_id(), "apbt0", - mrst_timer_options == MRST_TIMER_LAPIC_APBT ? + intel_mid_timer_options == INTEL_MID_TIMER_LAPIC_APBT ? APBT_CLOCKEVENT_RATING - 100 : APBT_CLOCKEVENT_RATING, adev_virt_addr(adev), 0, apbt_freq); /* Firmware does EOI handling for us. */ adev->timer->eoi = NULL; - if (mrst_timer_options == MRST_TIMER_LAPIC_APBT) { + if (intel_mid_timer_options == INTEL_MID_TIMER_LAPIC_APBT) { global_clock_event = &adev->timer->ced; printk(KERN_DEBUG "%s clockevent registered as global\n", global_clock_event->name); @@ -253,7 +253,7 @@ static int apbt_cpuhp_notify(struct notifier_block *n, static __init int apbt_late_init(void) { - if (mrst_timer_options == MRST_TIMER_LAPIC_APBT || + if (intel_mid_timer_options == INTEL_MID_TIMER_LAPIC_APBT || !apb_timer_block_enabled) return 0; /* This notifier should be called after workqueue is ready */ @@ -340,7 +340,7 @@ void __init apbt_time_init(void) } #ifdef CONFIG_SMP /* kernel cmdline disable apb timer, so we will use lapic timers */ - if (mrst_timer_options == MRST_TIMER_LAPIC_APBT) { + if (intel_mid_timer_options == INTEL_MID_TIMER_LAPIC_APBT) { printk(KERN_INFO "apbt: disabled per cpu timer\n"); return; } diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c index 6d3d20073615..01d1c187c9f9 100644 --- a/arch/x86/kernel/early_printk.c +++ b/arch/x86/kernel/early_printk.c @@ -14,7 +14,7 @@ #include <xen/hvc-console.h> #include <asm/pci-direct.h> #include <asm/fixmap.h> -#include <asm/mrst.h> +#include <asm/intel-mid.h> #include <asm/pgtable.h> #include <linux/usb/ehci_def.h> #include <linux/efi.h> diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c index 06f87bece92a..c61a14a4a310 100644 --- a/arch/x86/kernel/head32.c +++ b/arch/x86/kernel/head32.c @@ -35,8 +35,8 @@ asmlinkage void __init i386_start_kernel(void) /* Call the subarch specific early setup function */ switch (boot_params.hdr.hardware_subarch) { - case X86_SUBARCH_MRST: - x86_mrst_early_setup(); + case X86_SUBARCH_INTEL_MID: + x86_intel_mid_early_setup(); break; case X86_SUBARCH_CE4100: x86_ce4100_early_setup(); diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c index 5b9dd445eb89..ca9622a25e95 100644 --- a/arch/x86/kernel/rtc.c +++ b/arch/x86/kernel/rtc.c @@ -12,7 +12,7 @@ #include <asm/vsyscall.h> #include <asm/x86_init.h> #include <asm/time.h> -#include <asm/mrst.h> +#include <asm/intel-mid.h> #include <asm/rtc.h> #ifdef CONFIG_X86_32 @@ -189,7 +189,7 @@ static __init int add_rtc_cmos(void) return 0; /* Intel MID platforms don't have ioport rtc */ - if (mrst_identify_cpu()) + if (intel_mid_identify_cpu()) return -ENODEV; #ifdef CONFIG_ACPI diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S index 10c4f3006afd..da6b35a98260 100644 --- a/arch/x86/kernel/vmlinux.lds.S +++ b/arch/x86/kernel/vmlinux.lds.S @@ -199,6 +199,15 @@ SECTIONS __x86_cpu_dev_end = .; } +#ifdef CONFIG_X86_INTEL_MID + .x86_intel_mid_dev.init : AT(ADDR(.x86_intel_mid_dev.init) - \ + LOAD_OFFSET) { + __x86_intel_mid_dev_start = .; + *(.x86_intel_mid_dev.init) + __x86_intel_mid_dev_end = .; + } +#endif + /* * start address and size of operations which during runtime * can be patched with virtualization friendly instructions or diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile index ee0af58ca5bd..e063eed0f912 100644 --- a/arch/x86/pci/Makefile +++ b/arch/x86/pci/Makefile @@ -18,7 +18,7 @@ obj-$(CONFIG_X86_VISWS) += visws.o obj-$(CONFIG_X86_NUMAQ) += numaq_32.o obj-$(CONFIG_X86_NUMACHIP) += numachip.o -obj-$(CONFIG_X86_INTEL_MID) += mrst.o +obj-$(CONFIG_X86_INTEL_MID) += intel_mid_pci.o obj-y += common.o early.o obj-y += bus_numa.o diff --git a/arch/x86/pci/mrst.c b/arch/x86/pci/intel_mid_pci.c index 903fded50786..51384ca727ad 100644 --- a/arch/x86/pci/mrst.c +++ b/arch/x86/pci/intel_mid_pci.c @@ -1,5 +1,5 @@ /* - * Moorestown PCI support + * Intel MID PCI support * Copyright (c) 2008 Intel Corporation * Jesse Barnes <jesse.barnes@intel.com> * @@ -150,12 +150,12 @@ static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg) * shim. Therefore, use the header type in shim instead. */ if (reg >= 0x100 || reg == PCI_STATUS || reg == PCI_HEADER_TYPE) - return 0; + return false; if (bus == 0 && (devfn == PCI_DEVFN(2, 0) || devfn == PCI_DEVFN(0, 0) || devfn == PCI_DEVFN(3, 0))) - return 1; - return 0; /* Langwell on others */ + return true; + return false; /* Langwell on others */ } static int pci_read(struct pci_bus *bus, unsigned int devfn, int where, @@ -205,7 +205,7 @@ static int pci_write(struct pci_bus *bus, unsigned int devfn, int where, where, size, value); } -static int mrst_pci_irq_enable(struct pci_dev *dev) +static int intel_mid_pci_irq_enable(struct pci_dev *dev) { u8 pin; struct io_apic_irq_attr irq_attr; @@ -225,23 +225,23 @@ static int mrst_pci_irq_enable(struct pci_dev *dev) return 0; } -struct pci_ops pci_mrst_ops = { +struct pci_ops intel_mid_pci_ops = { .read = pci_read, .write = pci_write, }; /** - * pci_mrst_init - installs pci_mrst_ops + * intel_mid_pci_init - installs intel_mid_pci_ops * * Moorestown has an interesting PCI implementation (see above). * Called when the early platform detection installs it. */ -int __init pci_mrst_init(void) +int __init intel_mid_pci_init(void) { pr_info("Intel MID platform detected, using MID PCI ops\n"); pci_mmcfg_late_init(); - pcibios_enable_irq = mrst_pci_irq_enable; - pci_root_ops = pci_mrst_ops; + pcibios_enable_irq = intel_mid_pci_irq_enable; + pci_root_ops = intel_mid_pci_ops; pci_soc_mode = 1; /* Continue with standard init */ return 1; diff --git a/arch/x86/platform/Makefile b/arch/x86/platform/Makefile index 01e0231a113e..20342d4c82ce 100644 --- a/arch/x86/platform/Makefile +++ b/arch/x86/platform/Makefile @@ -4,7 +4,7 @@ obj-y += efi/ obj-y += geode/ obj-y += goldfish/ obj-y += iris/ -obj-y += mrst/ +obj-y += intel-mid/ obj-y += olpc/ obj-y += scx200/ obj-y += sfi/ diff --git a/arch/x86/platform/intel-mid/Makefile b/arch/x86/platform/intel-mid/Makefile new file mode 100644 index 000000000000..01cc29ea5ff7 --- /dev/null +++ b/arch/x86/platform/intel-mid/Makefile @@ -0,0 +1,7 @@ +obj-$(CONFIG_X86_INTEL_MID) += intel-mid.o +obj-$(CONFIG_X86_INTEL_MID) += intel_mid_vrtc.o +obj-$(CONFIG_EARLY_PRINTK_INTEL_MID) += early_printk_intel_mid.o +# SFI specific code +ifdef CONFIG_X86_INTEL_MID +obj-$(CONFIG_SFI) += sfi.o device_libs/ +endif diff --git a/arch/x86/platform/intel-mid/device_libs/Makefile b/arch/x86/platform/intel-mid/device_libs/Makefile new file mode 100644 index 000000000000..097e7a7940d8 --- /dev/null +++ b/arch/x86/platform/intel-mid/device_libs/Makefile @@ -0,0 +1,22 @@ +# IPC Devices +obj-y += platform_ipc.o +obj-$(subst m,y,$(CONFIG_MFD_INTEL_MSIC)) += platform_msic.o +obj-$(subst m,y,$(CONFIG_SND_MFLD_MACHINE)) += platform_msic_audio.o +obj-$(subst m,y,$(CONFIG_GPIO_MSIC)) += platform_msic_gpio.o +obj-$(subst m,y,$(CONFIG_MFD_INTEL_MSIC)) += platform_msic_ocd.o +obj-$(subst m,y,$(CONFIG_MFD_INTEL_MSIC)) += platform_msic_battery.o +obj-$(subst m,y,$(CONFIG_INTEL_MID_POWER_BUTTON)) += platform_msic_power_btn.o +obj-$(subst m,y,$(CONFIG_GPIO_INTEL_PMIC)) += platform_pmic_gpio.o +obj-$(subst m,y,$(CONFIG_INTEL_MFLD_THERMAL)) += platform_msic_thermal.o +# I2C Devices +obj-$(subst m,y,$(CONFIG_SENSORS_EMC1403)) += platform_emc1403.o +obj-$(subst m,y,$(CONFIG_SENSORS_LIS3LV02D)) += platform_lis331.o +obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_max7315.o +obj-$(subst m,y,$(CONFIG_INPUT_MPU3050)) += platform_mpu3050.o +obj-$(subst m,y,$(CONFIG_INPUT_BMA150)) += platform_bma023.o +obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_tca6416.o +obj-$(subst m,y,$(CONFIG_DRM_MEDFIELD)) += platform_tc35876x.o +# SPI Devices +obj-$(subst m,y,$(CONFIG_SERIAL_MRST_MAX3110)) += platform_max3111.o +# MISC Devices +obj-$(subst m,y,$(CONFIG_KEYBOARD_GPIO)) += platform_gpio_keys.o diff --git a/arch/x86/platform/intel-mid/device_libs/platform_bma023.c b/arch/x86/platform/intel-mid/device_libs/platform_bma023.c new file mode 100644 index 000000000000..0ae7f2ae2296 --- /dev/null +++ b/arch/x86/platform/intel-mid/device_libs/platform_bma023.c @@ -0,0 +1,20 @@ +/* + * platform_bma023.c: bma023 platform data initilization file + * + * (C) Copyright 2013 Intel Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#include <asm/intel-mid.h> + +static const struct devs_id bma023_dev_id __initconst = { + .name = "bma023", + .type = SFI_DEV_TYPE_I2C, + .delay = 1, +}; + +sfi_device(bma023_dev_id); diff --git a/arch/x86/platform/intel-mid/device_libs/platform_emc1403.c b/arch/x86/platform/intel-mid/device_libs/platform_emc1403.c new file mode 100644 index 000000000000..0d942c1d26d5 --- /dev/null +++ b/arch/x86/platform/intel-mid/device_libs/platform_emc1403.c @@ -0,0 +1,41 @@ +/* + * platform_emc1403.c: emc1403 platform data initilization file + * + * (C) Copyright 2013 Intel Corporation + * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#include <linux/init.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <asm/intel-mid.h> + +static void __init *emc1403_platform_data(void *info) +{ + static short intr2nd_pdata; + struct i2c_board_info *i2c_info = info; + int intr = get_gpio_by_name("thermal_int"); + int intr2nd = get_gpio_by_name("thermal_alert"); + + if (intr == -1 || intr2nd == -1) + return NULL; + + i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET; + intr2nd_pdata = intr2nd + INTEL_MID_IRQ_OFFSET; + + return &intr2nd_pdata; +} + +static const struct devs_id emc1403_dev_id __initconst = { + .name = "emc1403", + .type = SFI_DEV_TYPE_I2C, + .delay = 1, + .get_platform_data = &emc1403_platform_data, +}; + +sfi_device(emc1403_dev_id); diff --git a/arch/x86/platform/intel-mid/device_libs/platform_gpio_keys.c b/arch/x86/platform/intel-mid/device_libs/platform_gpio_keys.c new file mode 100644 index 000000000000..a013a4834bbe --- /dev/null +++ b/arch/x86/platform/intel-mid/device_libs/platform_gpio_keys.c @@ -0,0 +1,83 @@ +/* + * platform_gpio_keys.c: gpio_keys platform data initilization file + * + * (C) Copyright 2013 Intel Corporation + * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#include <linux/input.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/gpio.h> +#include <linux/gpio_keys.h> +#include <linux/platform_device.h> +#include <asm/intel-mid.h> + +#define DEVICE_NAME "gpio-keys" + +/* + * we will search these buttons in SFI GPIO table (by name) + * and register them dynamically. Please add all possible + * buttons here, we will shrink them if no GPIO found. + */ +static struct gpio_keys_button gpio_button[] = { + {KEY_POWER, -1, 1, "power_btn", EV_KEY, 0, 3000}, + {KEY_PROG1, -1, 1, "prog_btn1", EV_KEY, 0, 20}, + {KEY_PROG2, -1, 1, "prog_btn2", EV_KEY, 0, 20}, + {SW_LID, -1, 1, "lid_switch", EV_SW, 0, 20}, + {KEY_VOLUMEUP, -1, 1, "vol_up", EV_KEY, 0, 20}, + {KEY_VOLUMEDOWN, -1, 1, "vol_down", EV_KEY, 0, 20}, + {KEY_CAMERA, -1, 1, "camera_full", EV_KEY, 0, 20}, + {KEY_CAMERA_FOCUS, -1, 1, "camera_half", EV_KEY, 0, 20}, + {SW_KEYPAD_SLIDE, -1, 1, "MagSw1", EV_SW, 0, 20}, + {SW_KEYPAD_SLIDE, -1, 1, "MagSw2", EV_SW, 0, 20}, +}; + +static struct gpio_keys_platform_data gpio_keys = { + .buttons = gpio_button, + .rep = 1, + .nbuttons = -1, /* will fill it after search */ +}; + +static struct platform_device pb_device = { + .name = DEVICE_NAME, + .id = -1, + .dev = { + .platform_data = &gpio_keys, + }, +}; + +/* + * Shrink the non-existent buttons, register the gpio button + * device if there is some + */ +static int __init pb_keys_init(void) +{ + struct gpio_keys_button *gb = gpio_button; + int i, num, good = 0; + + num = sizeof(gpio_button) / sizeof(struct gpio_keys_button); + for (i = 0; i < num; i++) { + gb[i].gpio = get_gpio_by_name(gb[i].desc); + pr_debug("info[%2d]: name = %s, gpio = %d\n", i, gb[i].desc, + gb[i].gpio); + if (gb[i].gpio == -1) + continue; + + if (i != good) + gb[good] = gb[i]; + good++; + } + + if (good) { + gpio_keys.nbuttons = good; + return platform_device_register(&pb_device); + } + return 0; +} +late_initcall(pb_keys_init); diff --git a/arch/x86/platform/intel-mid/device_libs/platform_ipc.c b/arch/x86/platform/intel-mid/device_libs/platform_ipc.c new file mode 100644 index 000000000000..a84b73d6c4a0 --- /dev/null +++ b/arch/x86/platform/intel-mid/device_libs/platform_ipc.c @@ -0,0 +1,68 @@ +/* + * platform_ipc.c: IPC platform library file + * + * (C) Copyright 2013 Intel Corporation + * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/sfi.h> +#include <linux/gpio.h> +#include <asm/intel-mid.h> +#include "platform_ipc.h" + +void __init ipc_device_handler(struct sfi_device_table_entry *pentry, + struct devs_id *dev) +{ + struct platform_device *pdev; + void *pdata = NULL; + static struct resource res __initdata = { + .name = "IRQ", + .flags = IORESOURCE_IRQ, + }; + + pr_debug("IPC bus, name = %16.16s, irq = 0x%2x\n", + pentry->name, pentry->irq); + + /* + * We need to call platform init of IPC devices to fill misc_pdata + * structure. It will be used in msic_init for initialization. + */ + if (dev != NULL) + pdata = dev->get_platform_data(pentry); + + /* + * On Medfield the platform device creation is handled by the MSIC + * MFD driver so we don't need to do it here. + */ + if (intel_mid_has_msic()) + return; + + pdev = platform_device_alloc(pentry->name, 0); + if (pdev == NULL) { + pr_err("out of memory for SFI platform device '%s'.\n", + pentry->name); + return; + } + res.start = pentry->irq; + platform_device_add_resources(pdev, &res, 1); + + pdev->dev.platform_data = pdata; + intel_scu_device_register(pdev); +} + +static const struct devs_id pmic_audio_dev_id __initconst = { + .name = "pmic_audio", + .type = SFI_DEV_TYPE_IPC, + .delay = 1, + .device_handler = &ipc_device_handler, +}; + +sfi_device(pmic_audio_dev_id); diff --git a/arch/x86/platform/intel-mid/device_libs/platform_ipc.h b/arch/x86/platform/intel-mid/device_libs/platform_ipc.h new file mode 100644 index 000000000000..8f568dd79605 --- /dev/null +++ b/arch/x86/platform/intel-mid/device_libs/platform_ipc.h @@ -0,0 +1,17 @@ +/* + * platform_ipc.h: IPC platform library header file + * + * (C) Copyright 2013 Intel Corporation + * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ +#ifndef _PLATFORM_IPC_H_ +#define _PLATFORM_IPC_H_ + +extern void __init ipc_device_handler(struct sfi_device_table_entry *pentry, + struct devs_id *dev) __attribute__((weak)); +#endif diff --git a/arch/x86/platform/intel-mid/device_libs/platform_lis331.c b/arch/x86/platform/intel-mid/device_libs/platform_lis331.c new file mode 100644 index 000000000000..15278c11f714 --- /dev/null +++ b/arch/x86/platform/intel-mid/device_libs/platform_lis331.c @@ -0,0 +1,39 @@ +/* + * platform_lis331.c: lis331 platform data initilization file + * + * (C) Copyright 2013 Intel Corporation + * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <asm/intel-mid.h> + +static void __init *lis331dl_platform_data(void *info) +{ + static short intr2nd_pdata; + struct i2c_board_info *i2c_info = info; + int intr = get_gpio_by_name("accel_int"); + int intr2nd = get_gpio_by_name("accel_2"); + + if (intr == -1 || intr2nd == -1) + return NULL; + + i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET; + intr2nd_pdata = intr2nd + INTEL_MID_IRQ_OFFSET; + + return &intr2nd_pdata; +} + +static const struct devs_id lis331dl_dev_id __initconst = { + .name = "i2c_accel", + .type = SFI_DEV_TYPE_I2C, + .get_platform_data = &lis331dl_platform_data, +}; + +sfi_device(lis331dl_dev_id); diff --git a/arch/x86/platform/intel-mid/device_libs/platform_max3111.c b/arch/x86/platform/intel-mid/device_libs/platform_max3111.c new file mode 100644 index 000000000000..afd1df94e0e5 --- /dev/null +++ b/arch/x86/platform/intel-mid/device_libs/platform_max3111.c @@ -0,0 +1,35 @@ +/* + * platform_max3111.c: max3111 platform data initilization file + * + * (C) Copyright 2013 Intel Corporation + * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#include <linux/gpio.h> +#include <linux/spi/spi.h> +#include <asm/intel-mid.h> + +static void __init *max3111_platform_data(void *info) +{ + struct spi_board_info *spi_info = info; + int intr = get_gpio_by_name("max3111_int"); + + spi_info->mode = SPI_MODE_0; + if (intr == -1) + return NULL; + spi_info->irq = intr + INTEL_MID_IRQ_OFFSET; + return NULL; +} + +static const struct devs_id max3111_dev_id __initconst = { + .name = "spi_max3111", + .type = SFI_DEV_TYPE_SPI, + .get_platform_data = &max3111_platform_data, +}; + +sfi_device(max3111_dev_id); diff --git a/arch/x86/platform/intel-mid/device_libs/platform_max7315.c b/arch/x86/platform/intel-mid/device_libs/platform_max7315.c new file mode 100644 index 000000000000..94ade10024ae --- /dev/null +++ b/arch/x86/platform/intel-mid/device_libs/platform_max7315.c @@ -0,0 +1,79 @@ +/* + * platform_max7315.c: max7315 platform data initilization file + * + * (C) Copyright 2013 Intel Corporation + * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#include <linux/init.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/platform_data/pca953x.h> +#include <asm/intel-mid.h> + +#define MAX7315_NUM 2 + +static void __init *max7315_platform_data(void *info) +{ + static struct pca953x_platform_data max7315_pdata[MAX7315_NUM]; + static int nr; + struct pca953x_platform_data *max7315 = &max7315_pdata[nr]; + struct i2c_board_info *i2c_info = info; + int gpio_base, intr; + char base_pin_name[SFI_NAME_LEN + 1]; + char intr_pin_name[SFI_NAME_LEN + 1]; + + if (nr == MAX7315_NUM) { + pr_err("too many max7315s, we only support %d\n", + MAX7315_NUM); + return NULL; + } + /* we have several max7315 on the board, we only need load several + * instances of the same pca953x driver to cover them + */ + strcpy(i2c_info->type, "max7315"); + if (nr++) { + sprintf(base_pin_name, "max7315_%d_base", nr); + sprintf(intr_pin_name, "max7315_%d_int", nr); + } else { + strcpy(base_pin_name, "max7315_base"); + strcpy(intr_pin_name, "max7315_int"); + } + + gpio_base = get_gpio_by_name(base_pin_name); + intr = get_gpio_by_name(intr_pin_name); + + if (gpio_base == -1) + return NULL; + max7315->gpio_base = gpio_base; + if (intr != -1) { + i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET; + max7315->irq_base = gpio_base + INTEL_MID_IRQ_OFFSET; + } else { + i2c_info->irq = -1; + max7315->irq_base = -1; + } + return max7315; +} + +static const struct devs_id max7315_dev_id __initconst = { + .name = "i2c_max7315", + .type = SFI_DEV_TYPE_I2C, + .delay = 1, + .get_platform_data = &max7315_platform_data, +}; + +static const struct devs_id max7315_2_dev_id __initconst = { + .name = "i2c_max7315_2", + .type = SFI_DEV_TYPE_I2C, + .delay = 1, + .get_platform_data = &max7315_platform_data, +}; + +sfi_device(max7315_dev_id); +sfi_device(max7315_2_dev_id); diff --git a/arch/x86/platform/intel-mid/device_libs/platform_mpu3050.c b/arch/x86/platform/intel-mid/device_libs/platform_mpu3050.c new file mode 100644 index 000000000000..dd28d63c84fb --- /dev/null +++ b/arch/x86/platform/intel-mid/device_libs/platform_mpu3050.c @@ -0,0 +1,36 @@ +/* + * platform_mpu3050.c: mpu3050 platform data initilization file + * + * (C) Copyright 2013 Intel Corporation + * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <asm/intel-mid.h> + +static void *mpu3050_platform_data(void *info) +{ + struct i2c_board_info *i2c_info = info; + int intr = get_gpio_by_name("mpu3050_int"); + + if (intr == -1) + return NULL; + + i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET; + return NULL; +} + +static const struct devs_id mpu3050_dev_id __initconst = { + .name = "mpu3050", + .type = SFI_DEV_TYPE_I2C, + .delay = 1, + .get_platform_data = &mpu3050_platform_data, +}; + +sfi_device(mpu3050_dev_id); diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic.c b/arch/x86/platform/intel-mid/device_libs/platform_msic.c new file mode 100644 index 000000000000..9f4a775a69d6 --- /dev/null +++ b/arch/x86/platform/intel-mid/device_libs/platform_msic.c @@ -0,0 +1,87 @@ +/* + * platform_msic.c: MSIC platform data initilization file + * + * (C) Copyright 2013 Intel Corporation + * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/scatterlist.h> +#include <linux/init.h> +#include <linux/sfi.h> +#include <linux/mfd/intel_msic.h> +#include <asm/intel_scu_ipc.h> +#include <asm/intel-mid.h> +#include "platform_msic.h" + +struct intel_msic_platform_data msic_pdata; + +static struct resource msic_resources[] = { + { + .start = INTEL_MSIC_IRQ_PHYS_BASE, + .end = INTEL_MSIC_IRQ_PHYS_BASE + 64 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device msic_device = { + .name = "intel_msic", + .id = -1, + .dev = { + .platform_data = &msic_pdata, + }, + .num_resources = ARRAY_SIZE(msic_resources), + .resource = msic_resources, +}; + +static int msic_scu_status_change(struct notifier_block *nb, + unsigned long code, void *data) +{ + if (code == SCU_DOWN) { + platform_device_unregister(&msic_device); + return 0; + } + + return platform_device_register(&msic_device); +} + +static int __init msic_init(void) +{ + static struct notifier_block msic_scu_notifier = { + .notifier_call = msic_scu_status_change, + }; + + /* + * We need to be sure that the SCU IPC is ready before MSIC device + * can be registered. + */ + if (intel_mid_has_msic()) + intel_scu_notifier_add(&msic_scu_notifier); + + return 0; +} +arch_initcall(msic_init); + +/* + * msic_generic_platform_data - sets generic platform data for the block + * @info: pointer to the SFI device table entry for this block + * @block: MSIC block + * + * Function sets IRQ number from the SFI table entry for given device to + * the MSIC platform data. + */ +void *msic_generic_platform_data(void *info, enum intel_msic_block block) +{ + struct sfi_device_table_entry *entry = info; + + BUG_ON(block < 0 || block >= INTEL_MSIC_BLOCK_LAST); + msic_pdata.irq[block] = entry->irq; + + return NULL; +} diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic.h b/arch/x86/platform/intel-mid/device_libs/platform_msic.h new file mode 100644 index 000000000000..917eb56d77da --- /dev/null +++ b/arch/x86/platform/intel-mid/device_libs/platform_msic.h @@ -0,0 +1,19 @@ +/* + * platform_msic.h: MSIC platform data header file + * + * (C) Copyright 2013 Intel Corporation + * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ +#ifndef _PLATFORM_MSIC_H_ +#define _PLATFORM_MSIC_H_ + +extern struct intel_msic_platform_data msic_pdata; + +extern void *msic_generic_platform_data(void *info, + enum intel_msic_block block) __attribute__((weak)); +#endif diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic_audio.c b/arch/x86/platform/intel-mid/device_libs/platform_msic_audio.c new file mode 100644 index 000000000000..29629397d2b3 --- /dev/null +++ b/arch/x86/platform/intel-mid/device_libs/platform_msic_audio.c @@ -0,0 +1,47 @@ +/* + * platform_msic_audio.c: MSIC audio platform data initilization file + * + * (C) Copyright 2013 Intel Corporation + * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/scatterlist.h> +#include <linux/init.h> +#include <linux/sfi.h> +#include <linux/platform_device.h> +#include <linux/mfd/intel_msic.h> +#include <asm/intel-mid.h> + +#include "platform_msic.h" +#include "platform_ipc.h" + +static void *msic_audio_platform_data(void *info) +{ + struct platform_device *pdev; + + pdev = platform_device_register_simple("sst-platform", -1, NULL, 0); + + if (IS_ERR(pdev)) { + pr_err("failed to create audio platform device\n"); + return NULL; + } + + return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_AUDIO); +} + +static const struct devs_id msic_audio_dev_id __initconst = { + .name = "msic_audio", + .type = SFI_DEV_TYPE_IPC, + .delay = 1, + .get_platform_data = &msic_audio_platform_data, + .device_handler = &ipc_device_handler, +}; + +sfi_device(msic_audio_dev_id); diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic_battery.c b/arch/x86/platform/intel-mid/device_libs/platform_msic_battery.c new file mode 100644 index 000000000000..f446c33df1a8 --- /dev/null +++ b/arch/x86/platform/intel-mid/device_libs/platform_msic_battery.c @@ -0,0 +1,37 @@ +/* + * platform_msic_battery.c: MSIC battery platform data initilization file + * + * (C) Copyright 2013 Intel Corporation + * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/scatterlist.h> +#include <linux/init.h> +#include <linux/sfi.h> +#include <linux/mfd/intel_msic.h> +#include <asm/intel-mid.h> + +#include "platform_msic.h" +#include "platform_ipc.h" + +static void __init *msic_battery_platform_data(void *info) +{ + return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_BATTERY); +} + +static const struct devs_id msic_battery_dev_id __initconst = { + .name = "msic_battery", + .type = SFI_DEV_TYPE_IPC, + .delay = 1, + .get_platform_data = &msic_battery_platform_data, + .device_handler = &ipc_device_handler, +}; + +sfi_device(msic_battery_dev_id); diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic_gpio.c b/arch/x86/platform/intel-mid/device_libs/platform_msic_gpio.c new file mode 100644 index 000000000000..2a4f7b1dd917 --- /dev/null +++ b/arch/x86/platform/intel-mid/device_libs/platform_msic_gpio.c @@ -0,0 +1,48 @@ +/* + * platform_msic_gpio.c: MSIC GPIO platform data initilization file + * + * (C) Copyright 2013 Intel Corporation + * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/scatterlist.h> +#include <linux/sfi.h> +#include <linux/init.h> +#include <linux/gpio.h> +#include <linux/mfd/intel_msic.h> +#include <asm/intel-mid.h> + +#include "platform_msic.h" +#include "platform_ipc.h" + +static void __init *msic_gpio_platform_data(void *info) +{ + static struct intel_msic_gpio_pdata msic_gpio_pdata; + + int gpio = get_gpio_by_name("msic_gpio_base"); + + if (gpio < 0) + return NULL; + + msic_gpio_pdata.gpio_base = gpio; + msic_pdata.gpio = &msic_gpio_pdata; + + return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_GPIO); +} + +static const struct devs_id msic_gpio_dev_id __initconst = { + .name = "msic_gpio", + .type = SFI_DEV_TYPE_IPC, + .delay = 1, + .get_platform_data = &msic_gpio_platform_data, + .device_handler = &ipc_device_handler, +}; + +sfi_device(msic_gpio_dev_id); diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic_ocd.c b/arch/x86/platform/intel-mid/device_libs/platform_msic_ocd.c new file mode 100644 index 000000000000..6497111ddb54 --- /dev/null +++ b/arch/x86/platform/intel-mid/device_libs/platform_msic_ocd.c @@ -0,0 +1,49 @@ +/* + * platform_msic_ocd.c: MSIC OCD platform data initilization file + * + * (C) Copyright 2013 Intel Corporation + * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/scatterlist.h> +#include <linux/sfi.h> +#include <linux/init.h> +#include <linux/gpio.h> +#include <linux/mfd/intel_msic.h> +#include <asm/intel-mid.h> + +#include "platform_msic.h" +#include "platform_ipc.h" + +static void __init *msic_ocd_platform_data(void *info) +{ + static struct intel_msic_ocd_pdata msic_ocd_pdata; + int gpio; + + gpio = get_gpio_by_name("ocd_gpio"); + + if (gpio < 0) + return NULL; + + msic_ocd_pdata.gpio = gpio; + msic_pdata.ocd = &msic_ocd_pdata; + + return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_OCD); +} + +static const struct devs_id msic_ocd_dev_id __initconst = { + .name = "msic_ocd", + .type = SFI_DEV_TYPE_IPC, + .delay = 1, + .get_platform_data = &msic_ocd_platform_data, + .device_handler = &ipc_device_handler, +}; + +sfi_device(msic_ocd_dev_id); diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic_power_btn.c b/arch/x86/platform/intel-mid/device_libs/platform_msic_power_btn.c new file mode 100644 index 000000000000..83a3459bc337 --- /dev/null +++ b/arch/x86/platform/intel-mid/device_libs/platform_msic_power_btn.c @@ -0,0 +1,36 @@ +/* + * platform_msic_power_btn.c: MSIC power btn platform data initilization file + * + * (C) Copyright 2013 Intel Corporation + * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/scatterlist.h> +#include <linux/sfi.h> +#include <linux/init.h> +#include <linux/mfd/intel_msic.h> +#include <asm/intel-mid.h> + +#include "platform_msic.h" +#include "platform_ipc.h" + +static void __init *msic_power_btn_platform_data(void *info) +{ + return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_POWER_BTN); +} + +static const struct devs_id msic_power_btn_dev_id __initconst = { + .name = "msic_power_btn", + .type = SFI_DEV_TYPE_IPC, + .delay = 1, + .get_platform_data = &msic_power_btn_platform_data, + .device_handler = &ipc_device_handler, +}; + +sfi_device(msic_power_btn_dev_id); diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic_thermal.c b/arch/x86/platform/intel-mid/device_libs/platform_msic_thermal.c new file mode 100644 index 000000000000..a351878b96bc --- /dev/null +++ b/arch/x86/platform/intel-mid/device_libs/platform_msic_thermal.c @@ -0,0 +1,37 @@ +/* + * platform_msic_thermal.c: msic_thermal platform data initilization file + * + * (C) Copyright 2013 Intel Corporation + * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#include <linux/input.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <linux/mfd/intel_msic.h> +#include <asm/intel-mid.h> + +#include "platform_msic.h" +#include "platform_ipc.h" + +static void __init *msic_thermal_platform_data(void *info) +{ + return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_THERMAL); +} + +static const struct devs_id msic_thermal_dev_id __initconst = { + .name = "msic_thermal", + .type = SFI_DEV_TYPE_IPC, + .delay = 1, + .get_platform_data = &msic_thermal_platform_data, + .device_handler = &ipc_device_handler, +}; + +sfi_device(msic_thermal_dev_id); diff --git a/arch/x86/platform/intel-mid/device_libs/platform_pmic_gpio.c b/arch/x86/platform/intel-mid/device_libs/platform_pmic_gpio.c new file mode 100644 index 000000000000..d87182a09263 --- /dev/null +++ b/arch/x86/platform/intel-mid/device_libs/platform_pmic_gpio.c @@ -0,0 +1,54 @@ +/* + * platform_pmic_gpio.c: PMIC GPIO platform data initilization file + * + * (C) Copyright 2013 Intel Corporation + * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/scatterlist.h> +#include <linux/gpio.h> +#include <linux/init.h> +#include <linux/sfi.h> +#include <linux/intel_pmic_gpio.h> +#include <asm/intel-mid.h> + +#include "platform_ipc.h" + +static void __init *pmic_gpio_platform_data(void *info) +{ + static struct intel_pmic_gpio_platform_data pmic_gpio_pdata; + int gpio_base = get_gpio_by_name("pmic_gpio_base"); + + if (gpio_base == -1) + gpio_base = 64; + pmic_gpio_pdata.gpio_base = gpio_base; + pmic_gpio_pdata.irq_base = gpio_base + INTEL_MID_IRQ_OFFSET; + pmic_gpio_pdata.gpiointr = 0xffffeff8; + + return &pmic_gpio_pdata; +} + +static const struct devs_id pmic_gpio_spi_dev_id __initconst = { + .name = "pmic_gpio", + .type = SFI_DEV_TYPE_SPI, + .delay = 1, + .get_platform_data = &pmic_gpio_platform_data, +}; + +static const struct devs_id pmic_gpio_ipc_dev_id __initconst = { + .name = "pmic_gpio", + .type = SFI_DEV_TYPE_IPC, + .delay = 1, + .get_platform_data = &pmic_gpio_platform_data, + .device_handler = &ipc_device_handler +}; + +sfi_device(pmic_gpio_spi_dev_id); +sfi_device(pmic_gpio_ipc_dev_id); diff --git a/arch/x86/platform/intel-mid/device_libs/platform_tc35876x.c b/arch/x86/platform/intel-mid/device_libs/platform_tc35876x.c new file mode 100644 index 000000000000..740fc757050c --- /dev/null +++ b/arch/x86/platform/intel-mid/device_libs/platform_tc35876x.c @@ -0,0 +1,36 @@ +/* + * platform_tc35876x.c: tc35876x platform data initilization file + * + * (C) Copyright 2013 Intel Corporation + * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#include <linux/gpio.h> +#include <linux/i2c/tc35876x.h> +#include <asm/intel-mid.h> + +/*tc35876x DSI_LVDS bridge chip and panel platform data*/ +static void *tc35876x_platform_data(void *data) +{ + static struct tc35876x_platform_data pdata; + + /* gpio pins set to -1 will not be used by the driver */ + pdata.gpio_bridge_reset = get_gpio_by_name("LCMB_RXEN"); + pdata.gpio_panel_bl_en = get_gpio_by_name("6S6P_BL_EN"); + pdata.gpio_panel_vadd = get_gpio_by_name("EN_VREG_LCD_V3P3"); + + return &pdata; +} + +static const struct devs_id tc35876x_dev_id __initconst = { + .name = "i2c_disp_brig", + .type = SFI_DEV_TYPE_I2C, + .get_platform_data = &tc35876x_platform_data, +}; + +sfi_device(tc35876x_dev_id); diff --git a/arch/x86/platform/intel-mid/device_libs/platform_tca6416.c b/arch/x86/platform/intel-mid/device_libs/platform_tca6416.c new file mode 100644 index 000000000000..22881c9a6737 --- /dev/null +++ b/arch/x86/platform/intel-mid/device_libs/platform_tca6416.c @@ -0,0 +1,57 @@ +/* + * platform_tca6416.c: tca6416 platform data initilization file + * + * (C) Copyright 2013 Intel Corporation + * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#include <linux/platform_data/pca953x.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <asm/intel-mid.h> + +#define TCA6416_NAME "tca6416" +#define TCA6416_BASE "tca6416_base" +#define TCA6416_INTR "tca6416_int" + +static void *tca6416_platform_data(void *info) +{ + static struct pca953x_platform_data tca6416; + struct i2c_board_info *i2c_info = info; + int gpio_base, intr; + char base_pin_name[SFI_NAME_LEN + 1]; + char intr_pin_name[SFI_NAME_LEN + 1]; + + strcpy(i2c_info->type, TCA6416_NAME); + strcpy(base_pin_name, TCA6416_BASE); + strcpy(intr_pin_name, TCA6416_INTR); + + gpio_base = get_gpio_by_name(base_pin_name); + intr = get_gpio_by_name(intr_pin_name); + + if (gpio_base == -1) + return NULL; + tca6416.gpio_base = gpio_base; + if (intr != -1) { + i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET; + tca6416.irq_base = gpio_base + INTEL_MID_IRQ_OFFSET; + } else { + i2c_info->irq = -1; + tca6416.irq_base = -1; + } + return &tca6416; +} + +static const struct devs_id tca6416_dev_id __initconst = { + .name = "tca6416", + .type = SFI_DEV_TYPE_I2C, + .delay = 1, + .get_platform_data = &tca6416_platform_data, +}; + +sfi_device(tca6416_dev_id); diff --git a/arch/x86/platform/mrst/early_printk_mrst.c b/arch/x86/platform/intel-mid/early_printk_intel_mid.c index 028454f0c3a5..4f702f554f6e 100644 --- a/arch/x86/platform/mrst/early_printk_mrst.c +++ b/arch/x86/platform/intel-mid/early_printk_intel_mid.c @@ -1,5 +1,5 @@ /* - * early_printk_mrst.c - early consoles for Intel MID platforms + * early_printk_intel_mid.c - early consoles for Intel MID platforms * * Copyright (c) 2008-2010, Intel Corporation * @@ -27,7 +27,7 @@ #include <asm/fixmap.h> #include <asm/pgtable.h> -#include <asm/mrst.h> +#include <asm/intel-mid.h> #define MRST_SPI_TIMEOUT 0x200000 #define MRST_REGBASE_SPI0 0xff128000 @@ -152,7 +152,7 @@ void mrst_early_console_init(void) spi0_cdiv = ((*pclk_spi0) & 0xe00) >> 9; freq = 100000000 / (spi0_cdiv + 1); - if (mrst_identify_cpu() == MRST_CPU_CHIP_PENWELL) + if (intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_PENWELL) mrst_spi_paddr = MRST_REGBASE_SPI1; pspi = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE, @@ -213,13 +213,14 @@ static void early_mrst_spi_putc(char c) } if (!timeout) - pr_warning("MRST earlycon: timed out\n"); + pr_warn("MRST earlycon: timed out\n"); else max3110_write_data(c); } /* Early SPI only uses polling mode */ -static void early_mrst_spi_write(struct console *con, const char *str, unsigned n) +static void early_mrst_spi_write(struct console *con, const char *str, + unsigned n) { int i; diff --git a/arch/x86/platform/intel-mid/intel-mid.c b/arch/x86/platform/intel-mid/intel-mid.c new file mode 100644 index 000000000000..f90e290f689f --- /dev/null +++ b/arch/x86/platform/intel-mid/intel-mid.c @@ -0,0 +1,213 @@ +/* + * intel-mid.c: Intel MID platform setup code + * + * (C) Copyright 2008, 2012 Intel Corporation + * Author: Jacob Pan (jacob.jun.pan@intel.com) + * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#define pr_fmt(fmt) "intel_mid: " fmt + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/scatterlist.h> +#include <linux/sfi.h> +#include <linux/irq.h> +#include <linux/module.h> +#include <linux/notifier.h> + +#include <asm/setup.h> +#include <asm/mpspec_def.h> +#include <asm/hw_irq.h> +#include <asm/apic.h> +#include <asm/io_apic.h> +#include <asm/intel-mid.h> +#include <asm/intel_mid_vrtc.h> +#include <asm/io.h> +#include <asm/i8259.h> +#include <asm/intel_scu_ipc.h> +#include <asm/apb_timer.h> +#include <asm/reboot.h> + +/* + * the clockevent devices on Moorestown/Medfield can be APBT or LAPIC clock, + * cmdline option x86_intel_mid_timer can be used to override the configuration + * to prefer one or the other. + * at runtime, there are basically three timer configurations: + * 1. per cpu apbt clock only + * 2. per cpu always-on lapic clocks only, this is Penwell/Medfield only + * 3. per cpu lapic clock (C3STOP) and one apbt clock, with broadcast. + * + * by default (without cmdline option), platform code first detects cpu type + * to see if we are on lincroft or penwell, then set up both lapic or apbt + * clocks accordingly. + * i.e. by default, medfield uses configuration #2, moorestown uses #1. + * config #3 is supported but not recommended on medfield. + * + * rating and feature summary: + * lapic (with C3STOP) --------- 100 + * apbt (always-on) ------------ 110 + * lapic (always-on,ARAT) ------ 150 + */ + +enum intel_mid_timer_options intel_mid_timer_options; + +enum intel_mid_cpu_type __intel_mid_cpu_chip; +EXPORT_SYMBOL_GPL(__intel_mid_cpu_chip); + +static void intel_mid_power_off(void) +{ +} + +static void intel_mid_reboot(void) +{ + intel_scu_ipc_simple_command(IPCMSG_COLD_BOOT, 0); +} + +static unsigned long __init intel_mid_calibrate_tsc(void) +{ + unsigned long fast_calibrate; + u32 lo, hi, ratio, fsb; + + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + pr_debug("IA32 perf status is 0x%x, 0x%0x\n", lo, hi); + ratio = (hi >> 8) & 0x1f; + pr_debug("ratio is %d\n", ratio); + if (!ratio) { + pr_err("read a zero ratio, should be incorrect!\n"); + pr_err("force tsc ratio to 16 ...\n"); + ratio = 16; + } + rdmsr(MSR_FSB_FREQ, lo, hi); + if ((lo & 0x7) == 0x7) + fsb = PENWELL_FSB_FREQ_83SKU; + else + fsb = PENWELL_FSB_FREQ_100SKU; + fast_calibrate = ratio * fsb; + pr_debug("read penwell tsc %lu khz\n", fast_calibrate); + lapic_timer_frequency = fsb * 1000 / HZ; + /* mark tsc clocksource as reliable */ + set_cpu_cap(&boot_cpu_data, X86_FEATURE_TSC_RELIABLE); + + if (fast_calibrate) + return fast_calibrate; + + return 0; +} + +static void __init intel_mid_time_init(void) +{ + sfi_table_parse(SFI_SIG_MTMR, NULL, NULL, sfi_parse_mtmr); + switch (intel_mid_timer_options) { + case INTEL_MID_TIMER_APBT_ONLY: + break; + case INTEL_MID_TIMER_LAPIC_APBT: + x86_init.timers.setup_percpu_clockev = setup_boot_APIC_clock; + x86_cpuinit.setup_percpu_clockev = setup_secondary_APIC_clock; + break; + default: + if (!boot_cpu_has(X86_FEATURE_ARAT)) + break; + x86_init.timers.setup_percpu_clockev = setup_boot_APIC_clock; + x86_cpuinit.setup_percpu_clockev = setup_secondary_APIC_clock; + return; + } + /* we need at least one APB timer */ + pre_init_apic_IRQ0(); + apbt_time_init(); +} + +static void intel_mid_arch_setup(void) +{ + if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x27) + __intel_mid_cpu_chip = INTEL_MID_CPU_CHIP_PENWELL; + else { + pr_err("Unknown Intel MID CPU (%d:%d), default to Penwell\n", + boot_cpu_data.x86, boot_cpu_data.x86_model); + __intel_mid_cpu_chip = INTEL_MID_CPU_CHIP_PENWELL; + } +} + +/* MID systems don't have i8042 controller */ +static int intel_mid_i8042_detect(void) +{ + return 0; +} + +/* + * Moorestown does not have external NMI source nor port 0x61 to report + * NMI status. The possible NMI sources are from pmu as a result of NMI + * watchdog or lock debug. Reading io port 0x61 results in 0xff which + * misled NMI handler. + */ +static unsigned char intel_mid_get_nmi_reason(void) +{ + return 0; +} + +/* + * Moorestown specific x86_init function overrides and early setup + * calls. + */ +void __init x86_intel_mid_early_setup(void) +{ + x86_init.resources.probe_roms = x86_init_noop; + x86_init.resources.reserve_resources = x86_init_noop; + + x86_init.timers.timer_init = intel_mid_time_init; + x86_init.timers.setup_percpu_clockev = x86_init_noop; + + x86_init.irqs.pre_vector_init = x86_init_noop; + + x86_init.oem.arch_setup = intel_mid_arch_setup; + + x86_cpuinit.setup_percpu_clockev = apbt_setup_secondary_clock; + + x86_platform.calibrate_tsc = intel_mid_calibrate_tsc; + x86_platform.i8042_detect = intel_mid_i8042_detect; + x86_init.timers.wallclock_init = intel_mid_rtc_init; + x86_platform.get_nmi_reason = intel_mid_get_nmi_reason; + + x86_init.pci.init = intel_mid_pci_init; + x86_init.pci.fixup_irqs = x86_init_noop; + + legacy_pic = &null_legacy_pic; + + pm_power_off = intel_mid_power_off; + machine_ops.emergency_restart = intel_mid_reboot; + + /* Avoid searching for BIOS MP tables */ + x86_init.mpparse.find_smp_config = x86_init_noop; + x86_init.mpparse.get_smp_config = x86_init_uint_noop; + set_bit(MP_BUS_ISA, mp_bus_not_pci); +} + +/* + * if user does not want to use per CPU apb timer, just give it a lower rating + * than local apic timer and skip the late per cpu timer init. + */ +static inline int __init setup_x86_intel_mid_timer(char *arg) +{ + if (!arg) + return -EINVAL; + + if (strcmp("apbt_only", arg) == 0) + intel_mid_timer_options = INTEL_MID_TIMER_APBT_ONLY; + else if (strcmp("lapic_and_apbt", arg) == 0) + intel_mid_timer_options = INTEL_MID_TIMER_LAPIC_APBT; + else { + pr_warn("X86 INTEL_MID timer option %s not recognised" + " use x86_intel_mid_timer=apbt_only or lapic_and_apbt\n", + arg); + return -EINVAL; + } + return 0; +} +__setup("x86_intel_mid_timer=", setup_x86_intel_mid_timer); + diff --git a/arch/x86/platform/mrst/vrtc.c b/arch/x86/platform/intel-mid/intel_mid_vrtc.c index 5e355b134ba4..4762cff7facd 100644 --- a/arch/x86/platform/mrst/vrtc.c +++ b/arch/x86/platform/intel-mid/intel_mid_vrtc.c @@ -1,5 +1,5 @@ /* - * vrtc.c: Driver for virtual RTC device on Intel MID platform + * intel_mid_vrtc.c: Driver for virtual RTC device on Intel MID platform * * (C) Copyright 2009 Intel Corporation * @@ -23,8 +23,8 @@ #include <linux/sfi.h> #include <linux/platform_device.h> -#include <asm/mrst.h> -#include <asm/mrst-vrtc.h> +#include <asm/intel-mid.h> +#include <asm/intel_mid_vrtc.h> #include <asm/time.h> #include <asm/fixmap.h> @@ -79,7 +79,7 @@ void vrtc_get_time(struct timespec *now) /* vRTC YEAR reg contains the offset to 1972 */ year += 1972; - printk(KERN_INFO "vRTC: sec: %d min: %d hour: %d day: %d " + pr_info("vRTC: sec: %d min: %d hour: %d day: %d " "mon: %d year: %d\n", sec, min, hour, mday, mon, year); now->tv_sec = mktime(year, mon, mday, hour, min, sec); @@ -109,15 +109,14 @@ int vrtc_set_mmss(const struct timespec *now) vrtc_cmos_write(tm.tm_sec, RTC_SECONDS); spin_unlock_irqrestore(&rtc_lock, flags); } else { - printk(KERN_ERR - "%s: Invalid vRTC value: write of %lx to vRTC failed\n", + pr_err("%s: Invalid vRTC value: write of %lx to vRTC failed\n", __FUNCTION__, now->tv_sec); retval = -EINVAL; } return retval; } -void __init mrst_rtc_init(void) +void __init intel_mid_rtc_init(void) { unsigned long vrtc_paddr; @@ -155,10 +154,10 @@ static struct platform_device vrtc_device = { }; /* Register the RTC device if appropriate */ -static int __init mrst_device_create(void) +static int __init intel_mid_device_create(void) { /* No Moorestown, no device */ - if (!mrst_identify_cpu()) + if (!intel_mid_identify_cpu()) return -ENODEV; /* No timer, no device */ if (!sfi_mrtc_num) @@ -175,4 +174,4 @@ static int __init mrst_device_create(void) return platform_device_register(&vrtc_device); } -module_init(mrst_device_create); +module_init(intel_mid_device_create); diff --git a/arch/x86/platform/intel-mid/sfi.c b/arch/x86/platform/intel-mid/sfi.c new file mode 100644 index 000000000000..c84c1ca396bf --- /dev/null +++ b/arch/x86/platform/intel-mid/sfi.c @@ -0,0 +1,488 @@ +/* + * intel_mid_sfi.c: Intel MID SFI initialization code + * + * (C) Copyright 2013 Intel Corporation + * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/scatterlist.h> +#include <linux/sfi.h> +#include <linux/intel_pmic_gpio.h> +#include <linux/spi/spi.h> +#include <linux/i2c.h> +#include <linux/skbuff.h> +#include <linux/gpio.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/platform_device.h> +#include <linux/irq.h> +#include <linux/module.h> +#include <linux/notifier.h> +#include <linux/mmc/core.h> +#include <linux/mmc/card.h> +#include <linux/blkdev.h> + +#include <asm/setup.h> +#include <asm/mpspec_def.h> +#include <asm/hw_irq.h> +#include <asm/apic.h> +#include <asm/io_apic.h> +#include <asm/intel-mid.h> +#include <asm/intel_mid_vrtc.h> +#include <asm/io.h> +#include <asm/i8259.h> +#include <asm/intel_scu_ipc.h> +#include <asm/apb_timer.h> +#include <asm/reboot.h> + +#define SFI_SIG_OEM0 "OEM0" +#define MAX_IPCDEVS 24 +#define MAX_SCU_SPI 24 +#define MAX_SCU_I2C 24 + +static struct platform_device *ipc_devs[MAX_IPCDEVS]; +static struct spi_board_info *spi_devs[MAX_SCU_SPI]; +static struct i2c_board_info *i2c_devs[MAX_SCU_I2C]; +static struct sfi_gpio_table_entry *gpio_table; +static struct sfi_timer_table_entry sfi_mtimer_array[SFI_MTMR_MAX_NUM]; +static int ipc_next_dev; +static int spi_next_dev; +static int i2c_next_dev; +static int i2c_bus[MAX_SCU_I2C]; +static int gpio_num_entry; +static u32 sfi_mtimer_usage[SFI_MTMR_MAX_NUM]; +int sfi_mrtc_num; +int sfi_mtimer_num; + +struct sfi_rtc_table_entry sfi_mrtc_array[SFI_MRTC_MAX]; +EXPORT_SYMBOL_GPL(sfi_mrtc_array); + +struct blocking_notifier_head intel_scu_notifier = + BLOCKING_NOTIFIER_INIT(intel_scu_notifier); +EXPORT_SYMBOL_GPL(intel_scu_notifier); + +#define intel_mid_sfi_get_pdata(dev, priv) \ + ((dev)->get_platform_data ? (dev)->get_platform_data(priv) : NULL) + +/* parse all the mtimer info to a static mtimer array */ +int __init sfi_parse_mtmr(struct sfi_table_header *table) +{ + struct sfi_table_simple *sb; + struct sfi_timer_table_entry *pentry; + struct mpc_intsrc mp_irq; + int totallen; + + sb = (struct sfi_table_simple *)table; + if (!sfi_mtimer_num) { + sfi_mtimer_num = SFI_GET_NUM_ENTRIES(sb, + struct sfi_timer_table_entry); + pentry = (struct sfi_timer_table_entry *) sb->pentry; + totallen = sfi_mtimer_num * sizeof(*pentry); + memcpy(sfi_mtimer_array, pentry, totallen); + } + + pr_debug("SFI MTIMER info (num = %d):\n", sfi_mtimer_num); + pentry = sfi_mtimer_array; + for (totallen = 0; totallen < sfi_mtimer_num; totallen++, pentry++) { + pr_debug("timer[%d]: paddr = 0x%08x, freq = %dHz, irq = %d\n", + totallen, (u32)pentry->phys_addr, + pentry->freq_hz, pentry->irq); + if (!pentry->irq) + continue; + mp_irq.type = MP_INTSRC; + mp_irq.irqtype = mp_INT; +/* triggering mode edge bit 2-3, active high polarity bit 0-1 */ + mp_irq.irqflag = 5; + mp_irq.srcbus = MP_BUS_ISA; + mp_irq.srcbusirq = pentry->irq; /* IRQ */ + mp_irq.dstapic = MP_APIC_ALL; + mp_irq.dstirq = pentry->irq; + mp_save_irq(&mp_irq); + } + + return 0; +} + +struct sfi_timer_table_entry *sfi_get_mtmr(int hint) +{ + int i; + if (hint < sfi_mtimer_num) { + if (!sfi_mtimer_usage[hint]) { + pr_debug("hint taken for timer %d irq %d\n", + hint, sfi_mtimer_array[hint].irq); + sfi_mtimer_usage[hint] = 1; + return &sfi_mtimer_array[hint]; + } + } + /* take the first timer available */ + for (i = 0; i < sfi_mtimer_num;) { + if (!sfi_mtimer_usage[i]) { + sfi_mtimer_usage[i] = 1; + return &sfi_mtimer_array[i]; + } + i++; + } + return NULL; +} + +void sfi_free_mtmr(struct sfi_timer_table_entry *mtmr) +{ + int i; + for (i = 0; i < sfi_mtimer_num;) { + if (mtmr->irq == sfi_mtimer_array[i].irq) { + sfi_mtimer_usage[i] = 0; + return; + } + i++; + } +} + +/* parse all the mrtc info to a global mrtc array */ +int __init sfi_parse_mrtc(struct sfi_table_header *table) +{ + struct sfi_table_simple *sb; + struct sfi_rtc_table_entry *pentry; + struct mpc_intsrc mp_irq; + + int totallen; + + sb = (struct sfi_table_simple *)table; + if (!sfi_mrtc_num) { + sfi_mrtc_num = SFI_GET_NUM_ENTRIES(sb, + struct sfi_rtc_table_entry); + pentry = (struct sfi_rtc_table_entry *)sb->pentry; + totallen = sfi_mrtc_num * sizeof(*pentry); + memcpy(sfi_mrtc_array, pentry, totallen); + } + + pr_debug("SFI RTC info (num = %d):\n", sfi_mrtc_num); + pentry = sfi_mrtc_array; + for (totallen = 0; totallen < sfi_mrtc_num; totallen++, pentry++) { + pr_debug("RTC[%d]: paddr = 0x%08x, irq = %d\n", + totallen, (u32)pentry->phys_addr, pentry->irq); + mp_irq.type = MP_INTSRC; + mp_irq.irqtype = mp_INT; + mp_irq.irqflag = 0xf; /* level trigger and active low */ + mp_irq.srcbus = MP_BUS_ISA; + mp_irq.srcbusirq = pentry->irq; /* IRQ */ + mp_irq.dstapic = MP_APIC_ALL; + mp_irq.dstirq = pentry->irq; + mp_save_irq(&mp_irq); + } + return 0; +} + + +/* + * Parsing GPIO table first, since the DEVS table will need this table + * to map the pin name to the actual pin. + */ +static int __init sfi_parse_gpio(struct sfi_table_header *table) +{ + struct sfi_table_simple *sb; + struct sfi_gpio_table_entry *pentry; + int num, i; + + if (gpio_table) + return 0; + sb = (struct sfi_table_simple *)table; + num = SFI_GET_NUM_ENTRIES(sb, struct sfi_gpio_table_entry); + pentry = (struct sfi_gpio_table_entry *)sb->pentry; + + gpio_table = kmalloc(num * sizeof(*pentry), GFP_KERNEL); + if (!gpio_table) + return -1; + memcpy(gpio_table, pentry, num * sizeof(*pentry)); + gpio_num_entry = num; + + pr_debug("GPIO pin info:\n"); + for (i = 0; i < num; i++, pentry++) + pr_debug("info[%2d]: controller = %16.16s, pin_name = %16.16s," + " pin = %d\n", i, + pentry->controller_name, + pentry->pin_name, + pentry->pin_no); + return 0; +} + +int get_gpio_by_name(const char *name) +{ + struct sfi_gpio_table_entry *pentry = gpio_table; + int i; + + if (!pentry) + return -1; + for (i = 0; i < gpio_num_entry; i++, pentry++) { + if (!strncmp(name, pentry->pin_name, SFI_NAME_LEN)) + return pentry->pin_no; + } + return -1; +} + +void __init intel_scu_device_register(struct platform_device *pdev) +{ + if (ipc_next_dev == MAX_IPCDEVS) + pr_err("too many SCU IPC devices"); + else + ipc_devs[ipc_next_dev++] = pdev; +} + +static void __init intel_scu_spi_device_register(struct spi_board_info *sdev) +{ + struct spi_board_info *new_dev; + + if (spi_next_dev == MAX_SCU_SPI) { + pr_err("too many SCU SPI devices"); + return; + } + + new_dev = kzalloc(sizeof(*sdev), GFP_KERNEL); + if (!new_dev) { + pr_err("failed to alloc mem for delayed spi dev %s\n", + sdev->modalias); + return; + } + memcpy(new_dev, sdev, sizeof(*sdev)); + + spi_devs[spi_next_dev++] = new_dev; +} + +static void __init intel_scu_i2c_device_register(int bus, + struct i2c_board_info *idev) +{ + struct i2c_board_info *new_dev; + + if (i2c_next_dev == MAX_SCU_I2C) { + pr_err("too many SCU I2C devices"); + return; + } + + new_dev = kzalloc(sizeof(*idev), GFP_KERNEL); + if (!new_dev) { + pr_err("failed to alloc mem for delayed i2c dev %s\n", + idev->type); + return; + } + memcpy(new_dev, idev, sizeof(*idev)); + + i2c_bus[i2c_next_dev] = bus; + i2c_devs[i2c_next_dev++] = new_dev; +} + +/* Called by IPC driver */ +void intel_scu_devices_create(void) +{ + int i; + + for (i = 0; i < ipc_next_dev; i++) + platform_device_add(ipc_devs[i]); + + for (i = 0; i < spi_next_dev; i++) + spi_register_board_info(spi_devs[i], 1); + + for (i = 0; i < i2c_next_dev; i++) { + struct i2c_adapter *adapter; + struct i2c_client *client; + + adapter = i2c_get_adapter(i2c_bus[i]); + if (adapter) { + client = i2c_new_device(adapter, i2c_devs[i]); + if (!client) + pr_err("can't create i2c device %s\n", + i2c_devs[i]->type); + } else + i2c_register_board_info(i2c_bus[i], i2c_devs[i], 1); + } + intel_scu_notifier_post(SCU_AVAILABLE, NULL); +} +EXPORT_SYMBOL_GPL(intel_scu_devices_create); + +/* Called by IPC driver */ +void intel_scu_devices_destroy(void) +{ + int i; + + intel_scu_notifier_post(SCU_DOWN, NULL); + + for (i = 0; i < ipc_next_dev; i++) + platform_device_del(ipc_devs[i]); +} +EXPORT_SYMBOL_GPL(intel_scu_devices_destroy); + +static void __init install_irq_resource(struct platform_device *pdev, int irq) +{ + /* Single threaded */ + static struct resource res __initdata = { + .name = "IRQ", + .flags = IORESOURCE_IRQ, + }; + res.start = irq; + platform_device_add_resources(pdev, &res, 1); +} + +static void __init sfi_handle_ipc_dev(struct sfi_device_table_entry *pentry, + struct devs_id *dev) +{ + struct platform_device *pdev; + void *pdata = NULL; + + pr_debug("IPC bus, name = %16.16s, irq = 0x%2x\n", + pentry->name, pentry->irq); + pdata = intel_mid_sfi_get_pdata(dev, pentry); + + pdev = platform_device_alloc(pentry->name, 0); + if (pdev == NULL) { + pr_err("out of memory for SFI platform device '%s'.\n", + pentry->name); + return; + } + install_irq_resource(pdev, pentry->irq); + + pdev->dev.platform_data = pdata; + platform_device_add(pdev); +} + +static void __init sfi_handle_spi_dev(struct sfi_device_table_entry *pentry, + struct devs_id *dev) +{ + struct spi_board_info spi_info; + void *pdata = NULL; + + memset(&spi_info, 0, sizeof(spi_info)); + strncpy(spi_info.modalias, pentry->name, SFI_NAME_LEN); + spi_info.irq = ((pentry->irq == (u8)0xff) ? 0 : pentry->irq); + spi_info.bus_num = pentry->host_num; + spi_info.chip_select = pentry->addr; + spi_info.max_speed_hz = pentry->max_freq; + pr_debug("SPI bus=%d, name=%16.16s, irq=0x%2x, max_freq=%d, cs=%d\n", + spi_info.bus_num, + spi_info.modalias, + spi_info.irq, + spi_info.max_speed_hz, + spi_info.chip_select); + + pdata = intel_mid_sfi_get_pdata(dev, &spi_info); + + spi_info.platform_data = pdata; + if (dev->delay) + intel_scu_spi_device_register(&spi_info); + else + spi_register_board_info(&spi_info, 1); +} + +static void __init sfi_handle_i2c_dev(struct sfi_device_table_entry *pentry, + struct devs_id *dev) +{ + struct i2c_board_info i2c_info; + void *pdata = NULL; + + memset(&i2c_info, 0, sizeof(i2c_info)); + strncpy(i2c_info.type, pentry->name, SFI_NAME_LEN); + i2c_info.irq = ((pentry->irq == (u8)0xff) ? 0 : pentry->irq); + i2c_info.addr = pentry->addr; + pr_debug("I2C bus = %d, name = %16.16s, irq = 0x%2x, addr = 0x%x\n", + pentry->host_num, + i2c_info.type, + i2c_info.irq, + i2c_info.addr); + pdata = intel_mid_sfi_get_pdata(dev, &i2c_info); + i2c_info.platform_data = pdata; + + if (dev->delay) + intel_scu_i2c_device_register(pentry->host_num, &i2c_info); + else + i2c_register_board_info(pentry->host_num, &i2c_info, 1); +} + +extern struct devs_id *const __x86_intel_mid_dev_start[], + *const __x86_intel_mid_dev_end[]; + +static struct devs_id __init *get_device_id(u8 type, char *name) +{ + struct devs_id *const *dev_table; + + for (dev_table = __x86_intel_mid_dev_start; + dev_table < __x86_intel_mid_dev_end; dev_table++) { + struct devs_id *dev = *dev_table; + if (dev->type == type && + !strncmp(dev->name, name, SFI_NAME_LEN)) { + return dev; + } + } + + return NULL; +} + +static int __init sfi_parse_devs(struct sfi_table_header *table) +{ + struct sfi_table_simple *sb; + struct sfi_device_table_entry *pentry; + struct devs_id *dev = NULL; + int num, i; + int ioapic; + struct io_apic_irq_attr irq_attr; + + sb = (struct sfi_table_simple *)table; + num = SFI_GET_NUM_ENTRIES(sb, struct sfi_device_table_entry); + pentry = (struct sfi_device_table_entry *)sb->pentry; + + for (i = 0; i < num; i++, pentry++) { + int irq = pentry->irq; + + if (irq != (u8)0xff) { /* native RTE case */ + /* these SPI2 devices are not exposed to system as PCI + * devices, but they have separate RTE entry in IOAPIC + * so we have to enable them one by one here + */ + ioapic = mp_find_ioapic(irq); + irq_attr.ioapic = ioapic; + irq_attr.ioapic_pin = irq; + irq_attr.trigger = 1; + irq_attr.polarity = 1; + io_apic_set_pci_routing(NULL, irq, &irq_attr); + } else + irq = 0; /* No irq */ + + dev = get_device_id(pentry->type, pentry->name); + + if (!dev) + continue; + + if (dev->device_handler) { + dev->device_handler(pentry, dev); + } else { + switch (pentry->type) { + case SFI_DEV_TYPE_IPC: + sfi_handle_ipc_dev(pentry, dev); + break; + case SFI_DEV_TYPE_SPI: + sfi_handle_spi_dev(pentry, dev); + break; + case SFI_DEV_TYPE_I2C: + sfi_handle_i2c_dev(pentry, dev); + break; + case SFI_DEV_TYPE_UART: + case SFI_DEV_TYPE_HSI: + default: + break; + } + } + } + return 0; +} + +static int __init intel_mid_platform_init(void) +{ + sfi_table_parse(SFI_SIG_GPIO, NULL, NULL, sfi_parse_gpio); + sfi_table_parse(SFI_SIG_DEVS, NULL, NULL, sfi_parse_devs); + return 0; +} +arch_initcall(intel_mid_platform_init); diff --git a/arch/x86/platform/mrst/Makefile b/arch/x86/platform/mrst/Makefile deleted file mode 100644 index af1da7e623f9..000000000000 --- a/arch/x86/platform/mrst/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -obj-$(CONFIG_X86_INTEL_MID) += mrst.o -obj-$(CONFIG_X86_INTEL_MID) += vrtc.o -obj-$(CONFIG_EARLY_PRINTK_INTEL_MID) += early_printk_mrst.o diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c deleted file mode 100644 index 3ca5957b7a34..000000000000 --- a/arch/x86/platform/mrst/mrst.c +++ /dev/null @@ -1,1052 +0,0 @@ -/* - * mrst.c: Intel Moorestown platform specific setup code - * - * (C) Copyright 2008 Intel Corporation - * Author: Jacob Pan (jacob.jun.pan@intel.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; version 2 - * of the License. - */ - -#define pr_fmt(fmt) "mrst: " fmt - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/scatterlist.h> -#include <linux/sfi.h> -#include <linux/intel_pmic_gpio.h> -#include <linux/spi/spi.h> -#include <linux/i2c.h> -#include <linux/platform_data/pca953x.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/platform_device.h> -#include <linux/irq.h> -#include <linux/module.h> -#include <linux/notifier.h> -#include <linux/mfd/intel_msic.h> -#include <linux/gpio.h> -#include <linux/i2c/tc35876x.h> - -#include <asm/setup.h> -#include <asm/mpspec_def.h> -#include <asm/hw_irq.h> -#include <asm/apic.h> -#include <asm/io_apic.h> -#include <asm/mrst.h> -#include <asm/mrst-vrtc.h> -#include <asm/io.h> -#include <asm/i8259.h> -#include <asm/intel_scu_ipc.h> -#include <asm/apb_timer.h> -#include <asm/reboot.h> - -/* - * the clockevent devices on Moorestown/Medfield can be APBT or LAPIC clock, - * cmdline option x86_mrst_timer can be used to override the configuration - * to prefer one or the other. - * at runtime, there are basically three timer configurations: - * 1. per cpu apbt clock only - * 2. per cpu always-on lapic clocks only, this is Penwell/Medfield only - * 3. per cpu lapic clock (C3STOP) and one apbt clock, with broadcast. - * - * by default (without cmdline option), platform code first detects cpu type - * to see if we are on lincroft or penwell, then set up both lapic or apbt - * clocks accordingly. - * i.e. by default, medfield uses configuration #2, moorestown uses #1. - * config #3 is supported but not recommended on medfield. - * - * rating and feature summary: - * lapic (with C3STOP) --------- 100 - * apbt (always-on) ------------ 110 - * lapic (always-on,ARAT) ------ 150 - */ - -enum mrst_timer_options mrst_timer_options; - -static u32 sfi_mtimer_usage[SFI_MTMR_MAX_NUM]; -static struct sfi_timer_table_entry sfi_mtimer_array[SFI_MTMR_MAX_NUM]; -enum mrst_cpu_type __mrst_cpu_chip; -EXPORT_SYMBOL_GPL(__mrst_cpu_chip); - -int sfi_mtimer_num; - -struct sfi_rtc_table_entry sfi_mrtc_array[SFI_MRTC_MAX]; -EXPORT_SYMBOL_GPL(sfi_mrtc_array); -int sfi_mrtc_num; - -static void mrst_power_off(void) -{ -} - -static void mrst_reboot(void) -{ - intel_scu_ipc_simple_command(IPCMSG_COLD_BOOT, 0); -} - -/* parse all the mtimer info to a static mtimer array */ -static int __init sfi_parse_mtmr(struct sfi_table_header *table) -{ - struct sfi_table_simple *sb; - struct sfi_timer_table_entry *pentry; - struct mpc_intsrc mp_irq; - int totallen; - - sb = (struct sfi_table_simple *)table; - if (!sfi_mtimer_num) { - sfi_mtimer_num = SFI_GET_NUM_ENTRIES(sb, - struct sfi_timer_table_entry); - pentry = (struct sfi_timer_table_entry *) sb->pentry; - totallen = sfi_mtimer_num * sizeof(*pentry); - memcpy(sfi_mtimer_array, pentry, totallen); - } - - pr_debug("SFI MTIMER info (num = %d):\n", sfi_mtimer_num); - pentry = sfi_mtimer_array; - for (totallen = 0; totallen < sfi_mtimer_num; totallen++, pentry++) { - pr_debug("timer[%d]: paddr = 0x%08x, freq = %dHz," - " irq = %d\n", totallen, (u32)pentry->phys_addr, - pentry->freq_hz, pentry->irq); - if (!pentry->irq) - continue; - mp_irq.type = MP_INTSRC; - mp_irq.irqtype = mp_INT; -/* triggering mode edge bit 2-3, active high polarity bit 0-1 */ - mp_irq.irqflag = 5; - mp_irq.srcbus = MP_BUS_ISA; - mp_irq.srcbusirq = pentry->irq; /* IRQ */ - mp_irq.dstapic = MP_APIC_ALL; - mp_irq.dstirq = pentry->irq; - mp_save_irq(&mp_irq); - } - - return 0; -} - -struct sfi_timer_table_entry *sfi_get_mtmr(int hint) -{ - int i; - if (hint < sfi_mtimer_num) { - if (!sfi_mtimer_usage[hint]) { - pr_debug("hint taken for timer %d irq %d\n",\ - hint, sfi_mtimer_array[hint].irq); - sfi_mtimer_usage[hint] = 1; - return &sfi_mtimer_array[hint]; - } - } - /* take the first timer available */ - for (i = 0; i < sfi_mtimer_num;) { - if (!sfi_mtimer_usage[i]) { - sfi_mtimer_usage[i] = 1; - return &sfi_mtimer_array[i]; - } - i++; - } - return NULL; -} - -void sfi_free_mtmr(struct sfi_timer_table_entry *mtmr) -{ - int i; - for (i = 0; i < sfi_mtimer_num;) { - if (mtmr->irq == sfi_mtimer_array[i].irq) { - sfi_mtimer_usage[i] = 0; - return; - } - i++; - } -} - -/* parse all the mrtc info to a global mrtc array */ -int __init sfi_parse_mrtc(struct sfi_table_header *table) -{ - struct sfi_table_simple *sb; - struct sfi_rtc_table_entry *pentry; - struct mpc_intsrc mp_irq; - - int totallen; - - sb = (struct sfi_table_simple *)table; - if (!sfi_mrtc_num) { - sfi_mrtc_num = SFI_GET_NUM_ENTRIES(sb, - struct sfi_rtc_table_entry); - pentry = (struct sfi_rtc_table_entry *)sb->pentry; - totallen = sfi_mrtc_num * sizeof(*pentry); - memcpy(sfi_mrtc_array, pentry, totallen); - } - - pr_debug("SFI RTC info (num = %d):\n", sfi_mrtc_num); - pentry = sfi_mrtc_array; - for (totallen = 0; totallen < sfi_mrtc_num; totallen++, pentry++) { - pr_debug("RTC[%d]: paddr = 0x%08x, irq = %d\n", - totallen, (u32)pentry->phys_addr, pentry->irq); - mp_irq.type = MP_INTSRC; - mp_irq.irqtype = mp_INT; - mp_irq.irqflag = 0xf; /* level trigger and active low */ - mp_irq.srcbus = MP_BUS_ISA; - mp_irq.srcbusirq = pentry->irq; /* IRQ */ - mp_irq.dstapic = MP_APIC_ALL; - mp_irq.dstirq = pentry->irq; - mp_save_irq(&mp_irq); - } - return 0; -} - -static unsigned long __init mrst_calibrate_tsc(void) -{ - unsigned long fast_calibrate; - u32 lo, hi, ratio, fsb; - - rdmsr(MSR_IA32_PERF_STATUS, lo, hi); - pr_debug("IA32 perf status is 0x%x, 0x%0x\n", lo, hi); - ratio = (hi >> 8) & 0x1f; - pr_debug("ratio is %d\n", ratio); - if (!ratio) { - pr_err("read a zero ratio, should be incorrect!\n"); - pr_err("force tsc ratio to 16 ...\n"); - ratio = 16; - } - rdmsr(MSR_FSB_FREQ, lo, hi); - if ((lo & 0x7) == 0x7) - fsb = PENWELL_FSB_FREQ_83SKU; - else - fsb = PENWELL_FSB_FREQ_100SKU; - fast_calibrate = ratio * fsb; - pr_debug("read penwell tsc %lu khz\n", fast_calibrate); - lapic_timer_frequency = fsb * 1000 / HZ; - /* mark tsc clocksource as reliable */ - set_cpu_cap(&boot_cpu_data, X86_FEATURE_TSC_RELIABLE); - - if (fast_calibrate) - return fast_calibrate; - - return 0; -} - -static void __init mrst_time_init(void) -{ - sfi_table_parse(SFI_SIG_MTMR, NULL, NULL, sfi_parse_mtmr); - switch (mrst_timer_options) { - case MRST_TIMER_APBT_ONLY: - break; - case MRST_TIMER_LAPIC_APBT: - x86_init.timers.setup_percpu_clockev = setup_boot_APIC_clock; - x86_cpuinit.setup_percpu_clockev = setup_secondary_APIC_clock; - break; - default: - if (!boot_cpu_has(X86_FEATURE_ARAT)) - break; - x86_init.timers.setup_percpu_clockev = setup_boot_APIC_clock; - x86_cpuinit.setup_percpu_clockev = setup_secondary_APIC_clock; - return; - } - /* we need at least one APB timer */ - pre_init_apic_IRQ0(); - apbt_time_init(); -} - -static void mrst_arch_setup(void) -{ - if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x27) - __mrst_cpu_chip = MRST_CPU_CHIP_PENWELL; - else { - pr_err("Unknown Intel MID CPU (%d:%d), default to Penwell\n", - boot_cpu_data.x86, boot_cpu_data.x86_model); - __mrst_cpu_chip = MRST_CPU_CHIP_PENWELL; - } -} - -/* MID systems don't have i8042 controller */ -static int mrst_i8042_detect(void) -{ - return 0; -} - -/* - * Moorestown does not have external NMI source nor port 0x61 to report - * NMI status. The possible NMI sources are from pmu as a result of NMI - * watchdog or lock debug. Reading io port 0x61 results in 0xff which - * misled NMI handler. - */ -static unsigned char mrst_get_nmi_reason(void) -{ - return 0; -} - -/* - * Moorestown specific x86_init function overrides and early setup - * calls. - */ -void __init x86_mrst_early_setup(void) -{ - x86_init.resources.probe_roms = x86_init_noop; - x86_init.resources.reserve_resources = x86_init_noop; - - x86_init.timers.timer_init = mrst_time_init; - x86_init.timers.setup_percpu_clockev = x86_init_noop; - - x86_init.irqs.pre_vector_init = x86_init_noop; - - x86_init.oem.arch_setup = mrst_arch_setup; - - x86_cpuinit.setup_percpu_clockev = apbt_setup_secondary_clock; - - x86_platform.calibrate_tsc = mrst_calibrate_tsc; - x86_platform.i8042_detect = mrst_i8042_detect; - x86_init.timers.wallclock_init = mrst_rtc_init; - x86_platform.get_nmi_reason = mrst_get_nmi_reason; - - x86_init.pci.init = pci_mrst_init; - x86_init.pci.fixup_irqs = x86_init_noop; - - legacy_pic = &null_legacy_pic; - - /* Moorestown specific power_off/restart method */ - pm_power_off = mrst_power_off; - machine_ops.emergency_restart = mrst_reboot; - - /* Avoid searching for BIOS MP tables */ - x86_init.mpparse.find_smp_config = x86_init_noop; - x86_init.mpparse.get_smp_config = x86_init_uint_noop; - set_bit(MP_BUS_ISA, mp_bus_not_pci); -} - -/* - * if user does not want to use per CPU apb timer, just give it a lower rating - * than local apic timer and skip the late per cpu timer init. - */ -static inline int __init setup_x86_mrst_timer(char *arg) -{ - if (!arg) - return -EINVAL; - - if (strcmp("apbt_only", arg) == 0) - mrst_timer_options = MRST_TIMER_APBT_ONLY; - else if (strcmp("lapic_and_apbt", arg) == 0) - mrst_timer_options = MRST_TIMER_LAPIC_APBT; - else { - pr_warning("X86 MRST timer option %s not recognised" - " use x86_mrst_timer=apbt_only or lapic_and_apbt\n", - arg); - return -EINVAL; - } - return 0; -} -__setup("x86_mrst_timer=", setup_x86_mrst_timer); - -/* - * Parsing GPIO table first, since the DEVS table will need this table - * to map the pin name to the actual pin. - */ -static struct sfi_gpio_table_entry *gpio_table; -static int gpio_num_entry; - -static int __init sfi_parse_gpio(struct sfi_table_header *table) -{ - struct sfi_table_simple *sb; - struct sfi_gpio_table_entry *pentry; - int num, i; - - if (gpio_table) - return 0; - sb = (struct sfi_table_simple *)table; - num = SFI_GET_NUM_ENTRIES(sb, struct sfi_gpio_table_entry); - pentry = (struct sfi_gpio_table_entry *)sb->pentry; - - gpio_table = kmalloc(num * sizeof(*pentry), GFP_KERNEL); - if (!gpio_table) - return -1; - memcpy(gpio_table, pentry, num * sizeof(*pentry)); - gpio_num_entry = num; - - pr_debug("GPIO pin info:\n"); - for (i = 0; i < num; i++, pentry++) - pr_debug("info[%2d]: controller = %16.16s, pin_name = %16.16s," - " pin = %d\n", i, - pentry->controller_name, - pentry->pin_name, - pentry->pin_no); - return 0; -} - -static int get_gpio_by_name(const char *name) -{ - struct sfi_gpio_table_entry *pentry = gpio_table; - int i; - - if (!pentry) - return -1; - for (i = 0; i < gpio_num_entry; i++, pentry++) { - if (!strncmp(name, pentry->pin_name, SFI_NAME_LEN)) - return pentry->pin_no; - } - return -1; -} - -/* - * Here defines the array of devices platform data that IAFW would export - * through SFI "DEVS" table, we use name and type to match the device and - * its platform data. - */ -struct devs_id { - char name[SFI_NAME_LEN + 1]; - u8 type; - u8 delay; - void *(*get_platform_data)(void *info); -}; - -/* the offset for the mapping of global gpio pin to irq */ -#define MRST_IRQ_OFFSET 0x100 - -static void __init *pmic_gpio_platform_data(void *info) -{ - static struct intel_pmic_gpio_platform_data pmic_gpio_pdata; - int gpio_base = get_gpio_by_name("pmic_gpio_base"); - - if (gpio_base == -1) - gpio_base = 64; - pmic_gpio_pdata.gpio_base = gpio_base; - pmic_gpio_pdata.irq_base = gpio_base + MRST_IRQ_OFFSET; - pmic_gpio_pdata.gpiointr = 0xffffeff8; - - return &pmic_gpio_pdata; -} - -static void __init *max3111_platform_data(void *info) -{ - struct spi_board_info *spi_info = info; - int intr = get_gpio_by_name("max3111_int"); - - spi_info->mode = SPI_MODE_0; - if (intr == -1) - return NULL; - spi_info->irq = intr + MRST_IRQ_OFFSET; - return NULL; -} - -/* we have multiple max7315 on the board ... */ -#define MAX7315_NUM 2 -static void __init *max7315_platform_data(void *info) -{ - static struct pca953x_platform_data max7315_pdata[MAX7315_NUM]; - static int nr; - struct pca953x_platform_data *max7315 = &max7315_pdata[nr]; - struct i2c_board_info *i2c_info = info; - int gpio_base, intr; - char base_pin_name[SFI_NAME_LEN + 1]; - char intr_pin_name[SFI_NAME_LEN + 1]; - - if (nr == MAX7315_NUM) { - pr_err("too many max7315s, we only support %d\n", - MAX7315_NUM); - return NULL; - } - /* we have several max7315 on the board, we only need load several - * instances of the same pca953x driver to cover them - */ - strcpy(i2c_info->type, "max7315"); - if (nr++) { - sprintf(base_pin_name, "max7315_%d_base", nr); - sprintf(intr_pin_name, "max7315_%d_int", nr); - } else { - strcpy(base_pin_name, "max7315_base"); - strcpy(intr_pin_name, "max7315_int"); - } - - gpio_base = get_gpio_by_name(base_pin_name); - intr = get_gpio_by_name(intr_pin_name); - - if (gpio_base == -1) - return NULL; - max7315->gpio_base = gpio_base; - if (intr != -1) { - i2c_info->irq = intr + MRST_IRQ_OFFSET; - max7315->irq_base = gpio_base + MRST_IRQ_OFFSET; - } else { - i2c_info->irq = -1; - max7315->irq_base = -1; - } - return max7315; -} - -static void *tca6416_platform_data(void *info) -{ - static struct pca953x_platform_data tca6416; - struct i2c_board_info *i2c_info = info; - int gpio_base, intr; - char base_pin_name[SFI_NAME_LEN + 1]; - char intr_pin_name[SFI_NAME_LEN + 1]; - - strcpy(i2c_info->type, "tca6416"); - strcpy(base_pin_name, "tca6416_base"); - strcpy(intr_pin_name, "tca6416_int"); - - gpio_base = get_gpio_by_name(base_pin_name); - intr = get_gpio_by_name(intr_pin_name); - - if (gpio_base == -1) - return NULL; - tca6416.gpio_base = gpio_base; - if (intr != -1) { - i2c_info->irq = intr + MRST_IRQ_OFFSET; - tca6416.irq_base = gpio_base + MRST_IRQ_OFFSET; - } else { - i2c_info->irq = -1; - tca6416.irq_base = -1; - } - return &tca6416; -} - -static void *mpu3050_platform_data(void *info) -{ - struct i2c_board_info *i2c_info = info; - int intr = get_gpio_by_name("mpu3050_int"); - - if (intr == -1) - return NULL; - - i2c_info->irq = intr + MRST_IRQ_OFFSET; - return NULL; -} - -static void __init *emc1403_platform_data(void *info) -{ - static short intr2nd_pdata; - struct i2c_board_info *i2c_info = info; - int intr = get_gpio_by_name("thermal_int"); - int intr2nd = get_gpio_by_name("thermal_alert"); - - if (intr == -1 || intr2nd == -1) - return NULL; - - i2c_info->irq = intr + MRST_IRQ_OFFSET; - intr2nd_pdata = intr2nd + MRST_IRQ_OFFSET; - - return &intr2nd_pdata; -} - -static void __init *lis331dl_platform_data(void *info) -{ - static short intr2nd_pdata; - struct i2c_board_info *i2c_info = info; - int intr = get_gpio_by_name("accel_int"); - int intr2nd = get_gpio_by_name("accel_2"); - - if (intr == -1 || intr2nd == -1) - return NULL; - - i2c_info->irq = intr + MRST_IRQ_OFFSET; - intr2nd_pdata = intr2nd + MRST_IRQ_OFFSET; - - return &intr2nd_pdata; -} - -static void __init *no_platform_data(void *info) -{ - return NULL; -} - -static struct resource msic_resources[] = { - { - .start = INTEL_MSIC_IRQ_PHYS_BASE, - .end = INTEL_MSIC_IRQ_PHYS_BASE + 64 - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct intel_msic_platform_data msic_pdata; - -static struct platform_device msic_device = { - .name = "intel_msic", - .id = -1, - .dev = { - .platform_data = &msic_pdata, - }, - .num_resources = ARRAY_SIZE(msic_resources), - .resource = msic_resources, -}; - -static inline bool mrst_has_msic(void) -{ - return mrst_identify_cpu() == MRST_CPU_CHIP_PENWELL; -} - -static int msic_scu_status_change(struct notifier_block *nb, - unsigned long code, void *data) -{ - if (code == SCU_DOWN) { - platform_device_unregister(&msic_device); - return 0; - } - - return platform_device_register(&msic_device); -} - -static int __init msic_init(void) -{ - static struct notifier_block msic_scu_notifier = { - .notifier_call = msic_scu_status_change, - }; - - /* - * We need to be sure that the SCU IPC is ready before MSIC device - * can be registered. - */ - if (mrst_has_msic()) - intel_scu_notifier_add(&msic_scu_notifier); - - return 0; -} -arch_initcall(msic_init); - -/* - * msic_generic_platform_data - sets generic platform data for the block - * @info: pointer to the SFI device table entry for this block - * @block: MSIC block - * - * Function sets IRQ number from the SFI table entry for given device to - * the MSIC platform data. - */ -static void *msic_generic_platform_data(void *info, enum intel_msic_block block) -{ - struct sfi_device_table_entry *entry = info; - - BUG_ON(block < 0 || block >= INTEL_MSIC_BLOCK_LAST); - msic_pdata.irq[block] = entry->irq; - - return no_platform_data(info); -} - -static void *msic_battery_platform_data(void *info) -{ - return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_BATTERY); -} - -static void *msic_gpio_platform_data(void *info) -{ - static struct intel_msic_gpio_pdata pdata; - int gpio = get_gpio_by_name("msic_gpio_base"); - - if (gpio < 0) - return NULL; - - pdata.gpio_base = gpio; - msic_pdata.gpio = &pdata; - - return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_GPIO); -} - -static void *msic_audio_platform_data(void *info) -{ - struct platform_device *pdev; - - pdev = platform_device_register_simple("sst-platform", -1, NULL, 0); - if (IS_ERR(pdev)) { - pr_err("failed to create audio platform device\n"); - return NULL; - } - - return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_AUDIO); -} - -static void *msic_power_btn_platform_data(void *info) -{ - return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_POWER_BTN); -} - -static void *msic_ocd_platform_data(void *info) -{ - static struct intel_msic_ocd_pdata pdata; - int gpio = get_gpio_by_name("ocd_gpio"); - - if (gpio < 0) - return NULL; - - pdata.gpio = gpio; - msic_pdata.ocd = &pdata; - - return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_OCD); -} - -static void *msic_thermal_platform_data(void *info) -{ - return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_THERMAL); -} - -/* tc35876x DSI-LVDS bridge chip and panel platform data */ -static void *tc35876x_platform_data(void *data) -{ - static struct tc35876x_platform_data pdata; - - /* gpio pins set to -1 will not be used by the driver */ - pdata.gpio_bridge_reset = get_gpio_by_name("LCMB_RXEN"); - pdata.gpio_panel_bl_en = get_gpio_by_name("6S6P_BL_EN"); - pdata.gpio_panel_vadd = get_gpio_by_name("EN_VREG_LCD_V3P3"); - - return &pdata; -} - -static const struct devs_id __initconst device_ids[] = { - {"bma023", SFI_DEV_TYPE_I2C, 1, &no_platform_data}, - {"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data}, - {"pmic_gpio", SFI_DEV_TYPE_IPC, 1, &pmic_gpio_platform_data}, - {"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data}, - {"i2c_max7315", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data}, - {"i2c_max7315_2", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data}, - {"tca6416", SFI_DEV_TYPE_I2C, 1, &tca6416_platform_data}, - {"emc1403", SFI_DEV_TYPE_I2C, 1, &emc1403_platform_data}, - {"i2c_accel", SFI_DEV_TYPE_I2C, 0, &lis331dl_platform_data}, - {"pmic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data}, - {"mpu3050", SFI_DEV_TYPE_I2C, 1, &mpu3050_platform_data}, - {"i2c_disp_brig", SFI_DEV_TYPE_I2C, 0, &tc35876x_platform_data}, - - /* MSIC subdevices */ - {"msic_battery", SFI_DEV_TYPE_IPC, 1, &msic_battery_platform_data}, - {"msic_gpio", SFI_DEV_TYPE_IPC, 1, &msic_gpio_platform_data}, - {"msic_audio", SFI_DEV_TYPE_IPC, 1, &msic_audio_platform_data}, - {"msic_power_btn", SFI_DEV_TYPE_IPC, 1, &msic_power_btn_platform_data}, - {"msic_ocd", SFI_DEV_TYPE_IPC, 1, &msic_ocd_platform_data}, - {"msic_thermal", SFI_DEV_TYPE_IPC, 1, &msic_thermal_platform_data}, - - {}, -}; - -#define MAX_IPCDEVS 24 -static struct platform_device *ipc_devs[MAX_IPCDEVS]; -static int ipc_next_dev; - -#define MAX_SCU_SPI 24 -static struct spi_board_info *spi_devs[MAX_SCU_SPI]; -static int spi_next_dev; - -#define MAX_SCU_I2C 24 -static struct i2c_board_info *i2c_devs[MAX_SCU_I2C]; -static int i2c_bus[MAX_SCU_I2C]; -static int i2c_next_dev; - -static void __init intel_scu_device_register(struct platform_device *pdev) -{ - if(ipc_next_dev == MAX_IPCDEVS) - pr_err("too many SCU IPC devices"); - else - ipc_devs[ipc_next_dev++] = pdev; -} - -static void __init intel_scu_spi_device_register(struct spi_board_info *sdev) -{ - struct spi_board_info *new_dev; - - if (spi_next_dev == MAX_SCU_SPI) { - pr_err("too many SCU SPI devices"); - return; - } - - new_dev = kzalloc(sizeof(*sdev), GFP_KERNEL); - if (!new_dev) { - pr_err("failed to alloc mem for delayed spi dev %s\n", - sdev->modalias); - return; - } - memcpy(new_dev, sdev, sizeof(*sdev)); - - spi_devs[spi_next_dev++] = new_dev; -} - -static void __init intel_scu_i2c_device_register(int bus, - struct i2c_board_info *idev) -{ - struct i2c_board_info *new_dev; - - if (i2c_next_dev == MAX_SCU_I2C) { - pr_err("too many SCU I2C devices"); - return; - } - - new_dev = kzalloc(sizeof(*idev), GFP_KERNEL); - if (!new_dev) { - pr_err("failed to alloc mem for delayed i2c dev %s\n", - idev->type); - return; - } - memcpy(new_dev, idev, sizeof(*idev)); - - i2c_bus[i2c_next_dev] = bus; - i2c_devs[i2c_next_dev++] = new_dev; -} - -BLOCKING_NOTIFIER_HEAD(intel_scu_notifier); -EXPORT_SYMBOL_GPL(intel_scu_notifier); - -/* Called by IPC driver */ -void intel_scu_devices_create(void) -{ - int i; - - for (i = 0; i < ipc_next_dev; i++) - platform_device_add(ipc_devs[i]); - - for (i = 0; i < spi_next_dev; i++) - spi_register_board_info(spi_devs[i], 1); - - for (i = 0; i < i2c_next_dev; i++) { - struct i2c_adapter *adapter; - struct i2c_client *client; - - adapter = i2c_get_adapter(i2c_bus[i]); - if (adapter) { - client = i2c_new_device(adapter, i2c_devs[i]); - if (!client) - pr_err("can't create i2c device %s\n", - i2c_devs[i]->type); - } else - i2c_register_board_info(i2c_bus[i], i2c_devs[i], 1); - } - intel_scu_notifier_post(SCU_AVAILABLE, NULL); -} -EXPORT_SYMBOL_GPL(intel_scu_devices_create); - -/* Called by IPC driver */ -void intel_scu_devices_destroy(void) -{ - int i; - - intel_scu_notifier_post(SCU_DOWN, NULL); - - for (i = 0; i < ipc_next_dev; i++) - platform_device_del(ipc_devs[i]); -} -EXPORT_SYMBOL_GPL(intel_scu_devices_destroy); - -static void __init install_irq_resource(struct platform_device *pdev, int irq) -{ - /* Single threaded */ - static struct resource __initdata res = { - .name = "IRQ", - .flags = IORESOURCE_IRQ, - }; - res.start = irq; - platform_device_add_resources(pdev, &res, 1); -} - -static void __init sfi_handle_ipc_dev(struct sfi_device_table_entry *entry) -{ - const struct devs_id *dev = device_ids; - struct platform_device *pdev; - void *pdata = NULL; - - while (dev->name[0]) { - if (dev->type == SFI_DEV_TYPE_IPC && - !strncmp(dev->name, entry->name, SFI_NAME_LEN)) { - pdata = dev->get_platform_data(entry); - break; - } - dev++; - } - - /* - * On Medfield the platform device creation is handled by the MSIC - * MFD driver so we don't need to do it here. - */ - if (mrst_has_msic()) - return; - - pdev = platform_device_alloc(entry->name, 0); - if (pdev == NULL) { - pr_err("out of memory for SFI platform device '%s'.\n", - entry->name); - return; - } - install_irq_resource(pdev, entry->irq); - - pdev->dev.platform_data = pdata; - intel_scu_device_register(pdev); -} - -static void __init sfi_handle_spi_dev(struct spi_board_info *spi_info) -{ - const struct devs_id *dev = device_ids; - void *pdata = NULL; - - while (dev->name[0]) { - if (dev->type == SFI_DEV_TYPE_SPI && - !strncmp(dev->name, spi_info->modalias, SFI_NAME_LEN)) { - pdata = dev->get_platform_data(spi_info); - break; - } - dev++; - } - spi_info->platform_data = pdata; - if (dev->delay) - intel_scu_spi_device_register(spi_info); - else - spi_register_board_info(spi_info, 1); -} - -static void __init sfi_handle_i2c_dev(int bus, struct i2c_board_info *i2c_info) -{ - const struct devs_id *dev = device_ids; - void *pdata = NULL; - - while (dev->name[0]) { - if (dev->type == SFI_DEV_TYPE_I2C && - !strncmp(dev->name, i2c_info->type, SFI_NAME_LEN)) { - pdata = dev->get_platform_data(i2c_info); - break; - } - dev++; - } - i2c_info->platform_data = pdata; - - if (dev->delay) - intel_scu_i2c_device_register(bus, i2c_info); - else - i2c_register_board_info(bus, i2c_info, 1); - } - - -static int __init sfi_parse_devs(struct sfi_table_header *table) -{ - struct sfi_table_simple *sb; - struct sfi_device_table_entry *pentry; - struct spi_board_info spi_info; - struct i2c_board_info i2c_info; - int num, i, bus; - int ioapic; - struct io_apic_irq_attr irq_attr; - - sb = (struct sfi_table_simple *)table; - num = SFI_GET_NUM_ENTRIES(sb, struct sfi_device_table_entry); - pentry = (struct sfi_device_table_entry *)sb->pentry; - - for (i = 0; i < num; i++, pentry++) { - int irq = pentry->irq; - - if (irq != (u8)0xff) { /* native RTE case */ - /* these SPI2 devices are not exposed to system as PCI - * devices, but they have separate RTE entry in IOAPIC - * so we have to enable them one by one here - */ - ioapic = mp_find_ioapic(irq); - irq_attr.ioapic = ioapic; - irq_attr.ioapic_pin = irq; - irq_attr.trigger = 1; - irq_attr.polarity = 1; - io_apic_set_pci_routing(NULL, irq, &irq_attr); - } else - irq = 0; /* No irq */ - - switch (pentry->type) { - case SFI_DEV_TYPE_IPC: - pr_debug("info[%2d]: IPC bus, name = %16.16s, " - "irq = 0x%2x\n", i, pentry->name, pentry->irq); - sfi_handle_ipc_dev(pentry); - break; - case SFI_DEV_TYPE_SPI: - memset(&spi_info, 0, sizeof(spi_info)); - strncpy(spi_info.modalias, pentry->name, SFI_NAME_LEN); - spi_info.irq = irq; - spi_info.bus_num = pentry->host_num; - spi_info.chip_select = pentry->addr; - spi_info.max_speed_hz = pentry->max_freq; - pr_debug("info[%2d]: SPI bus = %d, name = %16.16s, " - "irq = 0x%2x, max_freq = %d, cs = %d\n", i, - spi_info.bus_num, - spi_info.modalias, - spi_info.irq, - spi_info.max_speed_hz, - spi_info.chip_select); - sfi_handle_spi_dev(&spi_info); - break; - case SFI_DEV_TYPE_I2C: - memset(&i2c_info, 0, sizeof(i2c_info)); - bus = pentry->host_num; - strncpy(i2c_info.type, pentry->name, SFI_NAME_LEN); - i2c_info.irq = irq; - i2c_info.addr = pentry->addr; - pr_debug("info[%2d]: I2C bus = %d, name = %16.16s, " - "irq = 0x%2x, addr = 0x%x\n", i, bus, - i2c_info.type, - i2c_info.irq, - i2c_info.addr); - sfi_handle_i2c_dev(bus, &i2c_info); - break; - case SFI_DEV_TYPE_UART: - case SFI_DEV_TYPE_HSI: - default: - ; - } - } - return 0; -} - -static int __init mrst_platform_init(void) -{ - sfi_table_parse(SFI_SIG_GPIO, NULL, NULL, sfi_parse_gpio); - sfi_table_parse(SFI_SIG_DEVS, NULL, NULL, sfi_parse_devs); - return 0; -} -arch_initcall(mrst_platform_init); - -/* - * we will search these buttons in SFI GPIO table (by name) - * and register them dynamically. Please add all possible - * buttons here, we will shrink them if no GPIO found. - */ -static struct gpio_keys_button gpio_button[] = { - {KEY_POWER, -1, 1, "power_btn", EV_KEY, 0, 3000}, - {KEY_PROG1, -1, 1, "prog_btn1", EV_KEY, 0, 20}, - {KEY_PROG2, -1, 1, "prog_btn2", EV_KEY, 0, 20}, - {SW_LID, -1, 1, "lid_switch", EV_SW, 0, 20}, - {KEY_VOLUMEUP, -1, 1, "vol_up", EV_KEY, 0, 20}, - {KEY_VOLUMEDOWN, -1, 1, "vol_down", EV_KEY, 0, 20}, - {KEY_CAMERA, -1, 1, "camera_full", EV_KEY, 0, 20}, - {KEY_CAMERA_FOCUS, -1, 1, "camera_half", EV_KEY, 0, 20}, - {SW_KEYPAD_SLIDE, -1, 1, "MagSw1", EV_SW, 0, 20}, - {SW_KEYPAD_SLIDE, -1, 1, "MagSw2", EV_SW, 0, 20}, -}; - -static struct gpio_keys_platform_data mrst_gpio_keys = { - .buttons = gpio_button, - .rep = 1, - .nbuttons = -1, /* will fill it after search */ -}; - -static struct platform_device pb_device = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &mrst_gpio_keys, - }, -}; - -/* - * Shrink the non-existent buttons, register the gpio button - * device if there is some - */ -static int __init pb_keys_init(void) -{ - struct gpio_keys_button *gb = gpio_button; - int i, num, good = 0; - - num = sizeof(gpio_button) / sizeof(struct gpio_keys_button); - for (i = 0; i < num; i++) { - gb[i].gpio = get_gpio_by_name(gb[i].desc); - pr_debug("info[%2d]: name = %s, gpio = %d\n", i, gb[i].desc, gb[i].gpio); - if (gb[i].gpio == -1) - continue; - - if (i != good) - gb[good] = gb[i]; - good++; - } - - if (good) { - mrst_gpio_keys.nbuttons = good; - return platform_device_register(&pb_device); - } - return 0; -} -late_initcall(pb_keys_init); diff --git a/drivers/gpu/drm/gma500/mdfld_dsi_output.h b/drivers/gpu/drm/gma500/mdfld_dsi_output.h index 45d5af0546bf..5b646c1f0c3e 100644 --- a/drivers/gpu/drm/gma500/mdfld_dsi_output.h +++ b/drivers/gpu/drm/gma500/mdfld_dsi_output.h @@ -39,7 +39,7 @@ #include "psb_intel_reg.h" #include "mdfld_output.h" -#include <asm/mrst.h> +#include <asm/intel-mid.h> #define FLD_MASK(start, end) (((1 << ((start) - (end) + 1)) - 1) << (end)) #define FLD_VAL(val, start, end) (((val) << (end)) & FLD_MASK(start, end)) diff --git a/drivers/gpu/drm/gma500/oaktrail_device.c b/drivers/gpu/drm/gma500/oaktrail_device.c index 08747fd7105c..7a9ce000fd86 100644 --- a/drivers/gpu/drm/gma500/oaktrail_device.c +++ b/drivers/gpu/drm/gma500/oaktrail_device.c @@ -26,7 +26,7 @@ #include "psb_drv.h" #include "psb_reg.h" #include "psb_intel_reg.h" -#include <asm/mrst.h> +#include <asm/intel-mid.h> #include <asm/intel_scu_ipc.h> #include "mid_bios.h" #include "intel_bios.h" diff --git a/drivers/gpu/drm/gma500/oaktrail_lvds.c b/drivers/gpu/drm/gma500/oaktrail_lvds.c index e77d7214fca4..3ece553311fe 100644 --- a/drivers/gpu/drm/gma500/oaktrail_lvds.c +++ b/drivers/gpu/drm/gma500/oaktrail_lvds.c @@ -22,7 +22,7 @@ #include <linux/i2c.h> #include <drm/drmP.h> -#include <asm/mrst.h> +#include <asm/intel-mid.h> #include "intel_bios.h" #include "psb_drv.h" diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c index 9215ed72bece..d654f831410d 100644 --- a/drivers/platform/x86/intel_scu_ipc.c +++ b/drivers/platform/x86/intel_scu_ipc.c @@ -25,7 +25,7 @@ #include <linux/interrupt.h> #include <linux/sfi.h> #include <linux/module.h> -#include <asm/mrst.h> +#include <asm/intel-mid.h> #include <asm/intel_scu_ipc.h> /* IPC defines the following message types */ @@ -579,7 +579,7 @@ static struct pci_driver ipc_driver = { static int __init intel_scu_ipc_init(void) { - platform = mrst_identify_cpu(); + platform = intel_mid_identify_cpu(); if (platform == 0) return -ENODEV; return pci_register_driver(&ipc_driver); diff --git a/drivers/rtc/rtc-mrst.c b/drivers/rtc/rtc-mrst.c index 578baf9d9725..315209d9b407 100644 --- a/drivers/rtc/rtc-mrst.c +++ b/drivers/rtc/rtc-mrst.c @@ -38,8 +38,8 @@ #include <asm-generic/rtc.h> #include <asm/intel_scu_ipc.h> -#include <asm/mrst.h> -#include <asm/mrst-vrtc.h> +#include <asm/intel-mid.h> +#include <asm/intel_mid_vrtc.h> struct mrst_rtc { struct rtc_device *rtc; diff --git a/drivers/watchdog/intel_scu_watchdog.c b/drivers/watchdog/intel_scu_watchdog.c index 9dda2d08af91..8ced25613956 100644 --- a/drivers/watchdog/intel_scu_watchdog.c +++ b/drivers/watchdog/intel_scu_watchdog.c @@ -48,7 +48,7 @@ #include <linux/atomic.h> #include <asm/intel_scu_ipc.h> #include <asm/apb_timer.h> -#include <asm/mrst.h> +#include <asm/intel-mid.h> #include "intel_scu_watchdog.h" @@ -445,7 +445,7 @@ static int __init intel_scu_watchdog_init(void) * * If it isn't an intel MID device then it doesn't have this watchdog */ - if (!mrst_identify_cpu()) + if (!intel_mid_identify_cpu()) return -ENODEV; /* Check boot parameters to verify that their initial values */ diff --git a/include/linux/sfi.h b/include/linux/sfi.h index fe817918b30e..d9b436f09925 100644 --- a/include/linux/sfi.h +++ b/include/linux/sfi.h @@ -59,6 +59,9 @@ #ifndef _LINUX_SFI_H #define _LINUX_SFI_H +#include <linux/init.h> +#include <linux/types.h> + /* Table signatures reserved by the SFI specification */ #define SFI_SIG_SYST "SYST" #define SFI_SIG_FREQ "FREQ" |