summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/mach-kirkwood/board-dt.c2
-rw-r--r--arch/arm/mach-kirkwood/common.c9
-rw-r--r--arch/arm/mach-kirkwood/common.h3
-rw-r--r--arch/arm/mach-kirkwood/cpuidle.c2
-rw-r--r--arch/arm/mach-kirkwood/dockstar-setup.c2
-rw-r--r--arch/arm/mach-kirkwood/mpp.c4
-rw-r--r--arch/arm/mach-kirkwood/netspace_v2-setup.c4
-rw-r--r--arch/arm/mach-kirkwood/openrd-setup.c14
-rw-r--r--arch/arm/mach-kirkwood/pcie.c13
-rw-r--r--arch/arm/mach-kirkwood/sheevaplug-setup.c2
-rw-r--r--arch/arm/mach-kirkwood/ts41x-setup.c3
11 files changed, 27 insertions, 31 deletions
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index 6261e159f615..e75fbdb533de 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -98,7 +98,7 @@ static void __init kirkwood_dt_init(void)
kirkwood_auxdata_lookup, NULL);
}
-static const char *kirkwood_dt_board_compat[] = {
+static const char * const kirkwood_dt_board_compat[] = {
"globalscale,dreamplug",
"dlink,dns-320",
"dlink,dns-325",
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 54e690dde9a0..f0fc25bd3ffe 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -18,10 +18,10 @@
#include <linux/clk-provider.h>
#include <linux/spinlock.h>
#include <linux/mv643xx_i2c.h>
+#include <linux/timex.h>
+#include <linux/kexec.h>
#include <net/dsa.h>
#include <asm/page.h>
-#include <asm/timex.h>
-#include <asm/kexec.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <mach/kirkwood.h>
@@ -646,8 +646,7 @@ void __init kirkwood_l2_init(void)
void __init kirkwood_init(void)
{
- printk(KERN_INFO "Kirkwood: %s, TCLK=%d.\n",
- kirkwood_id(), kirkwood_tclk);
+ pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk);
/*
* Disable propagation of mbus errors to the CPU local bus,
@@ -671,7 +670,7 @@ void __init kirkwood_init(void)
kirkwood_xor1_init();
kirkwood_crypto_init();
-#ifdef CONFIG_KEXEC
+#ifdef CONFIG_KEXEC
kexec_reinit = kirkwood_enable_pcie;
#endif
}
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index bcffd7ca1ca2..6088e9227889 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -47,7 +47,8 @@ void kirkwood_i2c_init(void);
void kirkwood_uart0_init(void);
void kirkwood_uart1_init(void);
void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay);
-void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, int (*dev_ready)(struct mtd_info *));
+void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts,
+ int (*dev_ready)(struct mtd_info *));
void kirkwood_audio_init(void);
void kirkwood_restart(char, const char *);
void kirkwood_clk_init(void);
diff --git a/arch/arm/mach-kirkwood/cpuidle.c b/arch/arm/mach-kirkwood/cpuidle.c
index 0f1710941878..f7304670f2f8 100644
--- a/arch/arm/mach-kirkwood/cpuidle.c
+++ b/arch/arm/mach-kirkwood/cpuidle.c
@@ -64,7 +64,7 @@ static int kirkwood_init_cpuidle(void)
cpuidle_register_driver(&kirkwood_idle_driver);
if (cpuidle_register_device(device)) {
- printk(KERN_ERR "kirkwood_init_cpuidle: Failed registering\n");
+ pr_err("kirkwood_init_cpuidle: Failed registering\n");
return -EIO;
}
return 0;
diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c
index 23dcb19cc2a7..791a98fafa29 100644
--- a/arch/arm/mach-kirkwood/dockstar-setup.c
+++ b/arch/arm/mach-kirkwood/dockstar-setup.c
@@ -93,7 +93,7 @@ static void __init dockstar_init(void)
if (gpio_request(29, "USB Power Enable") != 0 ||
gpio_direction_output(29, 1) != 0)
- printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
+ pr_err("can't set up GPIO 29 (USB Power Enable)\n");
kirkwood_ehci_init();
kirkwood_ge00_init(&dockstar_ge00_data);
diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c
index 0c6ad63f10c7..827cde42414f 100644
--- a/arch/arm/mach-kirkwood/mpp.c
+++ b/arch/arm/mach-kirkwood/mpp.c
@@ -30,8 +30,8 @@ static unsigned int __init kirkwood_variant(void)
if (dev == MV88F6180_DEV_ID)
return MPP_F6180_MASK;
- printk(KERN_ERR "MPP setup: unknown kirkwood variant "
- "(dev %#x rev %#x)\n", dev, rev);
+ pr_err("MPP setup: unknown kirkwood variant (dev %#x rev %#x)\n",
+ dev, rev);
return 0;
}
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index 88b0788bacae..728e86d33f0c 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -79,7 +79,7 @@ static struct platform_device netspace_v2_gpio_buttons = {
.name = "gpio-keys",
.id = -1,
.dev = {
- .platform_data = &netspace_v2_button_data,
+ .platform_data = &netspace_v2_button_data,
},
};
@@ -211,7 +211,7 @@ static unsigned int netspace_v2_mpp_config[] __initdata = {
MPP29_GPIO, /* Blue led (slow register) */
MPP30_GPIO, /* Blue led (command register) */
MPP31_GPIO, /* Board power off */
- MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */
+ MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */
MPP33_GPO, /* Fan speed (bit 2) */
0
};
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
index 134ef50d58fc..7e81e9b586bf 100644
--- a/arch/arm/mach-kirkwood/openrd-setup.c
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -121,14 +121,12 @@ static int __init uart1_mpp_config(void)
kirkwood_mpp_conf(openrd_uart1_mpp_config);
if (gpio_request(34, "SD_UART1_SEL")) {
- printk(KERN_ERR "GPIO request failed for SD/UART1 selection"
- ", gpio: 34\n");
+ pr_err("GPIO request 34 failed for SD/UART1 selection\n");
return -EIO;
}
if (gpio_request(28, "RS232_RS485_SEL")) {
- printk(KERN_ERR "GPIO request failed for RS232/RS485 selection"
- ", gpio# 28\n");
+ pr_err("GPIO request 28 failed for RS232/RS485 selection\n");
gpio_free(34);
return -EIO;
}
@@ -185,15 +183,13 @@ static void __init openrd_init(void)
if (uart1 <= 0) {
if (uart1 < 0)
- printk(KERN_ERR "Invalid kernel parameter to select "
- "UART1. Defaulting to SD. ERROR CODE: %d\n",
- uart1);
+ pr_err("Invalid kernel parameter to select UART1. Defaulting to SD. ERROR CODE: %d\n",
+ uart1);
/* Select SD
* Pin # 34: 0 => UART1, 1 => SD */
if (gpio_request(34, "SD_UART1_SEL")) {
- printk(KERN_ERR "GPIO request failed for SD/UART1 "
- "selection, gpio: 34\n");
+ pr_err("GPIO request 34 failed for SD/UART1 selection\n");
} else {
gpio_direction_output(34, 1);
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index ec544918b12c..258581131670 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -26,7 +26,7 @@ static void kirkwood_enable_pcie_clk(const char *port)
clk = clk_get_sys("pcie", port);
if (IS_ERR(clk)) {
- printk(KERN_ERR "PCIE clock %s missing\n", port);
+ pr_err("PCIE clock %s missing\n", port);
return;
}
clk_prepare_enable(clk);
@@ -168,7 +168,7 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
return 0;
index = pcie_port_map[nr];
- printk(KERN_INFO "PCI: bus%d uses PCIe port %d\n", sys->busnr, index);
+ pr_info("PCI: bus%d uses PCIe port %d\n", sys->busnr, index);
pp = kzalloc(sizeof(*pp), GFP_KERNEL);
if (!pp)
@@ -186,7 +186,8 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
case 1:
kirkwood_enable_pcie_clk("1");
pcie1_ioresources_init(pp);
- pci_ioremap_io(SZ_64K * sys->busnr, KIRKWOOD_PCIE1_IO_PHYS_BASE);
+ pci_ioremap_io(SZ_64K * sys->busnr,
+ KIRKWOOD_PCIE1_IO_PHYS_BASE);
break;
default:
panic("PCIe setup: invalid controller %d", index);
@@ -257,13 +258,13 @@ static struct hw_pci kirkwood_pci __initdata = {
static void __init add_pcie_port(int index, void __iomem *base)
{
- printk(KERN_INFO "Kirkwood PCIe port %d: ", index);
+ pr_info("Kirkwood PCIe port %d: ", index);
if (orion_pcie_link_up(base)) {
- printk(KERN_INFO "link up\n");
+ pr_info("link up\n");
pcie_port_map[num_pcie_ports++] = index;
} else
- printk(KERN_INFO "link down, ignoring\n");
+ pr_info("link down, ignoring\n");
}
void __init kirkwood_pcie_init(unsigned int portmask)
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index 28d0abaf4bd9..8a175948b28d 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -117,7 +117,7 @@ static void __init sheevaplug_init(void)
if (gpio_request(29, "USB Power Enable") != 0 ||
gpio_direction_output(29, 1) != 0)
- printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
+ pr_err("can't set up GPIO 29 (USB Power Enable)\n");
kirkwood_ehci_init();
kirkwood_ge00_init(&sheevaplug_ge00_data);
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
index 367a9400f532..e4c61279ea86 100644
--- a/arch/arm/mach-kirkwood/ts41x-setup.c
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c
@@ -170,8 +170,7 @@ static int __init ts41x_pci_init(void)
else
kirkwood_pcie_init(KW_PCIE0);
}
-
- return 0;
+ return 0;
}
subsys_initcall(ts41x_pci_init);
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 21:05:03 +0000