diff options
author | Sarah Sharp <sarah.a.sharp@linux.intel.com> | 2012-04-23 10:08:51 -0700 |
---|---|---|
committer | Sarah Sharp <sarah.a.sharp@linux.intel.com> | 2012-05-18 15:42:55 -0700 |
commit | e1f12eb6ba6f1e74007eb01ed26fad7c5239d62b (patch) | |
tree | 4c6753fc5091cd31b8cc0029e41f86f4f8c3b195 /drivers/bluetooth | |
parent | e3567d2c15a7a8e2f992a5f7c7683453ca406d82 (diff) |
USB: Disable hub-initiated LPM for comms devices.
Hub-initiated LPM is not good for USB communications devices. Comms
devices should be able to tell when their link can go into a lower power
state, because they know when an incoming transmission is finished.
Ideally, these devices would slam their links into a lower power state,
using the device-initiated LPM, after finishing the last packet of their
data transfer.
If we enable the idle timeouts for the parent hubs to enable
hub-initiated LPM, we will get a lot of useless LPM packets on the bus
as the devices reject LPM transitions when they're in the middle of
receiving data. Worse, some devices might blindly accept the
hub-initiated LPM and power down their radios while they're in the
middle of receiving a transmission.
The Intel Windows folks are disabling hub-initiated LPM for all USB
communications devices under a xHCI USB 3.0 host. In order to keep
the Linux behavior as close as possible to Windows, we need to do the
same in Linux.
Set the disable_hub_initiated_lpm flag for for all USB communications
drivers. I know there aren't currently any USB 3.0 devices that
implement these class specifications, but we should be ready if they do.
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Hansjoerg Lipp <hjlipp@web.de>
Cc: Tilman Schmidt <tilman@imap.cc>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Jan Dumon <j.dumon@option.com>
Cc: Petko Manolov <petkan@users.sourceforge.net>
Cc: Steve Glendinning <steve.glendinning@smsc.com>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: "Luis R. Rodriguez" <mcgrof@qca.qualcomm.com>
Cc: Jouni Malinen <jouni@qca.qualcomm.com>
Cc: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com>
Cc: Christian Lamparter <chunkeey@googlemail.com>
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Cc: Arend van Spriel <arend@broadcom.com>
Cc: "Franky (Zhenhui) Lin" <frankyl@broadcom.com>
Cc: Kan Yan <kanyan@broadcom.com>
Cc: Dan Williams <dcbw@redhat.com>
Cc: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Cc: Ivo van Doorn <IvDoorn@gmail.com>
Cc: Gertjan van Wingerde <gwingerde@gmail.com>
Cc: Helmut Schaa <helmut.schaa@googlemail.com>
Cc: Herton Ronaldo Krzesinski <herton@canonical.com>
Cc: Hin-Tak Leung <htl10@users.sourceforge.net>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Chaoming Li <chaoming_li@realsil.com.cn>
Cc: Daniel Drake <dsd@gentoo.org>
Cc: Ulrich Kunitz <kune@deine-taler.de>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Diffstat (limited to 'drivers/bluetooth')
-rw-r--r-- | drivers/bluetooth/ath3k.c | 1 | ||||
-rw-r--r-- | drivers/bluetooth/bcm203x.c | 1 | ||||
-rw-r--r-- | drivers/bluetooth/bfusb.c | 1 | ||||
-rw-r--r-- | drivers/bluetooth/bpa10x.c | 1 | ||||
-rw-r--r-- | drivers/bluetooth/btusb.c | 1 |
5 files changed, 5 insertions, 0 deletions
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index 57fd867553d..2812b152d6e 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -439,6 +439,7 @@ static struct usb_driver ath3k_driver = { .probe = ath3k_probe, .disconnect = ath3k_disconnect, .id_table = ath3k_table, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(ath3k_driver); diff --git a/drivers/bluetooth/bcm203x.c b/drivers/bluetooth/bcm203x.c index 1e742a50e2c..37ae175162f 100644 --- a/drivers/bluetooth/bcm203x.c +++ b/drivers/bluetooth/bcm203x.c @@ -279,6 +279,7 @@ static struct usb_driver bcm203x_driver = { .probe = bcm203x_probe, .disconnect = bcm203x_disconnect, .id_table = bcm203x_table, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(bcm203x_driver); diff --git a/drivers/bluetooth/bfusb.c b/drivers/bluetooth/bfusb.c index b8ac1c549a1..32e825144fe 100644 --- a/drivers/bluetooth/bfusb.c +++ b/drivers/bluetooth/bfusb.c @@ -749,6 +749,7 @@ static struct usb_driver bfusb_driver = { .probe = bfusb_probe, .disconnect = bfusb_disconnect, .id_table = bfusb_table, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(bfusb_driver); diff --git a/drivers/bluetooth/bpa10x.c b/drivers/bluetooth/bpa10x.c index d894340a760..609861a53c2 100644 --- a/drivers/bluetooth/bpa10x.c +++ b/drivers/bluetooth/bpa10x.c @@ -508,6 +508,7 @@ static struct usb_driver bpa10x_driver = { .probe = bpa10x_probe, .disconnect = bpa10x_disconnect, .id_table = bpa10x_table, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(bpa10x_driver); diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 9217121362e..461c68bc4dd 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -1218,6 +1218,7 @@ static struct usb_driver btusb_driver = { #endif .id_table = btusb_table, .supports_autosuspend = 1, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(btusb_driver); |