Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM driver updates from Olof Johansson:
 "Updates of SoC-near drivers and other driver updates that makes more
  sense to take through our tree.  In this case it's involved:

   - Some Davinci driver updates that has required corresponding
     platform code changes (gpio mostly)
   - CCI bindings and a few driver updates
   - Marvell mvebu patches for PCI MSI support (could have gone through
     the PCI tree for this release, but they were acked by Bjorn for
     3.12 so we kept them through arm-soc).
   - Marvell dove switch-over to DT-based PCIe configuration
   - Misc updates for Samsung platform dmaengine drivers"

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (32 commits)
  ARM: S3C24XX: add dma pdata for s3c2410, s3c2440 and s3c2442
  dmaengine: s3c24xx-dma: add support for the s3c2410 type of controller
  ARM: S3C24XX: Fix possible dma selection warning
  PCI: mvebu: make local functions static
  PCI: mvebu: add I/O access wrappers
  PCI: mvebu: Dynamically detect if the PEX link is up to enable hot plug
  ARM: mvebu: fix gated clock documentation
  ARM: dove: remove legacy pcie and clock init
  ARM: dove: switch to DT probed mbus address windows
  ARM: SAMSUNG: set s3c24xx_dma_filter for s3c64xx-spi0 device
  ARM: S3C24XX: add platform-devices for new dma driver for s3c2412 and s3c2443
  dmaengine: add driver for Samsung s3c24xx SoCs
  ARM: S3C24XX: number the dma clocks
  PCI: mvebu: add support for Marvell Dove SoCs
  PCI: mvebu: add support for reset on GPIO
  PCI: mvebu: remove subsys_initcall
  PCI: mvebu: increment nports only for registered ports
  PCI: mvebu: move clock enable before register access
  PCI: mvebu: add support for MSI
  irqchip: armada-370-xp: implement MSI support
  ...

34 files changed, 484 insertions, 285 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9bd3a85d880..04163fece49 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -826,7 +826,6 @@ config ARCH_DAVINCI
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
 	select HAVE_IDE
-	select NEED_MACH_GPIO_H
 	select TI_PRIV_EDMA
 	select USE_OF
 	select ZONE_DMA
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 30a44e2df47..40f15f133c5 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -22,17 +22,19 @@
 #include <linux/mtd/partitions.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
+#include <linux/platform_data/gpio-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
+#include <linux/platform_data/spi-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+#include <mach/common.h>
 #include <mach/cp_intc.h>
 #include <mach/mux.h>
-#include <linux/platform_data/mtd-davinci.h>
 #include <mach/da8xx.h>
-#include <linux/platform_data/usb-davinci.h>
-#include <linux/platform_data/mtd-davinci-aemif.h>
-#include <linux/platform_data/spi-davinci.h>
 
 #define DA830_EVM_PHY_ID		""
 /*
@@ -591,6 +593,10 @@ static __init void da830_evm_init(void)
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 	int ret;
 
+	ret = da830_register_gpio();
+	if (ret)
+		pr_warn("da830_evm_init: GPIO init failed: %d\n", ret);
+
 	ret = da830_register_edma(da830_edma_rsv);
 	if (ret)
 		pr_warning("da830_evm_init: edma registration failed: %d\n",
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index dd1fb24521a..df16cb88a26 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -28,6 +28,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
+#include <linux/platform_data/gpio-davinci.h>
 #include <linux/platform_data/mtd-davinci.h>
 #include <linux/platform_data/mtd-davinci-aemif.h>
 #include <linux/platform_data/spi-davinci.h>
@@ -38,6 +39,7 @@
 #include <linux/spi/flash.h>
 #include <linux/wl12xx.h>
 
+#include <mach/common.h>
 #include <mach/cp_intc.h>
 #include <mach/da8xx.h>
 #include <mach/mux.h>
@@ -1437,6 +1439,10 @@ static __init void da850_evm_init(void)
 {
 	int ret;
 
+	ret = da850_register_gpio();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
+
 	ret = pmic_tps65070_init();
 	if (ret)
 		pr_warn("%s: TPS65070 PMIC init failed: %d\n", __func__, ret);
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 42b23a3194a..ecdc7d44fa7 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -22,15 +22,17 @@
 #include <media/tvp514x.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
+#include <linux/platform_data/gpio-davinci.h>
+#include <linux/platform_data/i2c-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <linux/platform_data/i2c-davinci.h>
 #include <mach/serial.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/usb-davinci.h>
+#include <mach/common.h>
 
 #include "davinci.h"
 
@@ -375,6 +377,11 @@ static struct spi_board_info dm355_evm_spi_info[] __initconst = {
 static __init void dm355_evm_init(void)
 {
 	struct clk *aemif;
+	int ret;
+
+	ret = dm355_gpio_register();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
 
 	gpio_request(1, "dm9000");
 	gpio_direction_input(1);
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index 65a984c52df..43bacbf1531 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -19,15 +19,16 @@
 #include <linux/clk.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
+#include <linux/platform_data/i2c-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <linux/platform_data/i2c-davinci.h>
+#include <mach/common.h>
 #include <mach/serial.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/usb-davinci.h>
 
 #include "davinci.h"
 
@@ -234,6 +235,11 @@ static struct spi_board_info dm355_leopard_spi_info[] __initconst = {
 static __init void dm355_leopard_init(void)
 {
 	struct clk *aemif;
+	int ret;
+
+	ret = dm355_gpio_register();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
 
 	gpio_request(9, "dm9000");
 	gpio_direction_input(9);
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 4078ba93776..f4a6c18912e 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -743,6 +743,12 @@ static struct spi_board_info dm365_evm_spi_info[] __initconst = {
 
 static __init void dm365_evm_init(void)
 {
+	int ret;
+
+	ret = dm365_gpio_register();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
+
 	evm_init_i2c();
 	davinci_serial_init(dm365_serial_device);
 
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 40bb9b5b87e..9cc32c283b8 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -754,9 +754,14 @@ static int davinci_phy_fixup(struct phy_device *phydev)
 
 static __init void davinci_evm_init(void)
 {
+	int ret;
 	struct clk *aemif_clk;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
+	ret = dm644x_gpio_register();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
+
 	aemif_clk = clk_get(NULL, "aemif");
 	clk_prepare_enable(aemif_clk);
 
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 2bc3651d56c..44b20191a9f 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -33,17 +33,19 @@
 #include <linux/mtd/partitions.h>
 #include <linux/clk.h>
 #include <linux/export.h>
+#include <linux/platform_data/gpio-davinci.h>
+#include <linux/platform_data/i2c-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
+#include <mach/irqs.h>
 #include <mach/serial.h>
-#include <linux/platform_data/i2c-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
 #include <mach/clock.h>
 #include <mach/cdce949.h>
-#include <linux/platform_data/mtd-davinci-aemif.h>
 
 #include "davinci.h"
 #include "clock.h"
@@ -786,8 +788,13 @@ static struct edma_rsv_info dm646x_edma_rsv[] = {
 
 static __init void evm_init(void)
 {
+	int ret;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
+	ret = dm646x_gpio_register();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
+
 	evm_init_i2c();
 	davinci_serial_init(dm646x_serial_device);
 	dm646x_init_mcasp0(&dm646x_evm_snd_data[0]);
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 46f336fca80..bb680af9837 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -26,17 +26,18 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/mtd/partitions.h>
+#include <linux/platform_data/gpio-davinci.h>
+#include <linux/platform_data/i2c-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
-#include <linux/platform_data/i2c-davinci.h>
 #include <mach/serial.h>
 #include <mach/mux.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/usb-davinci.h>
 
 #include "davinci.h"
 
@@ -169,9 +170,14 @@ static struct davinci_mmc_config davinci_ntosd2_mmc_config = {
 
 static __init void davinci_ntosd2_init(void)
 {
+	int ret;
 	struct clk *aemif_clk;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
+	ret = dm644x_gpio_register();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
+
 	aemif_clk = clk_get(NULL, "aemif");
 	clk_prepare_enable(aemif_clk);
 
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index e0de2da41b5..2aac51d0e85 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -13,10 +13,12 @@
 #include <linux/init.h>
 #include <linux/console.h>
 #include <linux/gpio.h>
+#include <linux/platform_data/gpio-davinci.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+#include <mach/common.h>
 #include <mach/cp_intc.h>
 #include <mach/da8xx.h>
 #include <mach/mux.h>
@@ -290,6 +292,10 @@ static __init void omapl138_hawk_init(void)
 {
 	int ret;
 
+	ret = da850_register_gpio();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
+
 	davinci_serial_init(da8xx_serial_device);
 
 	omapl138_hawk_config_emac();
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index d6c746e35ad..0813b5167e0 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -11,6 +11,7 @@
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/clk.h>
+#include <linux/platform_data/gpio-davinci.h>
 
 #include <asm/mach/map.h>
 
@@ -20,7 +21,6 @@
 #include <mach/common.h>
 #include <mach/time.h>
 #include <mach/da8xx.h>
-#include <mach/gpio-davinci.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -1151,6 +1151,16 @@ static struct davinci_id da830_ids[] = {
 	},
 };
 
+static struct davinci_gpio_platform_data da830_gpio_platform_data = {
+	.ngpio = 128,
+	.intc_irq_num = DA830_N_CP_INTC_IRQ,
+};
+
+int __init da830_register_gpio(void)
+{
+	return da8xx_register_gpio(&da830_gpio_platform_data);
+}
+
 static struct davinci_timer_instance da830_timer_instance[2] = {
 	{
 		.base		= DA8XX_TIMER64P0_BASE,
@@ -1196,10 +1206,6 @@ static struct davinci_soc_info davinci_soc_info_da830 = {
 	.intc_irq_prios		= da830_default_priorities,
 	.intc_irq_num		= DA830_N_CP_INTC_IRQ,
 	.timer_info		= &da830_timer_info,
-	.gpio_type		= GPIO_TYPE_DAVINCI,
-	.gpio_base		= DA8XX_GPIO_BASE,
-	.gpio_num		= 128,
-	.gpio_irq		= IRQ_DA8XX_GPIO0,
 	.emac_pdata		= &da8xx_emac_pdata,
 };
 
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index f56e5fbfa2f..352984e1528 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -17,6 +17,7 @@
 #include <linux/platform_device.h>
 #include <linux/cpufreq.h>
 #include <linux/regulator/consumer.h>
+#include <linux/platform_data/gpio-davinci.h>
 
 #include <asm/mach/map.h>
 
@@ -28,7 +29,6 @@
 #include <mach/da8xx.h>
 #include <mach/cpufreq.h>
 #include <mach/pm.h>
-#include <mach/gpio-davinci.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -1281,6 +1281,16 @@ int __init da850_register_vpif_capture(struct vpif_capture_config
 	return platform_device_register(&da850_vpif_capture_dev);
 }
 
+static struct davinci_gpio_platform_data da850_gpio_platform_data = {
+	.ngpio = 144,
+	.intc_irq_num = DA850_N_CP_INTC_IRQ,
+};
+
+int __init da850_register_gpio(void)
+{
+	return da8xx_register_gpio(&da850_gpio_platform_data);
+}
+
 static struct davinci_soc_info davinci_soc_info_da850 = {
 	.io_desc		= da850_io_desc,
 	.io_desc_num		= ARRAY_SIZE(da850_io_desc),
@@ -1298,10 +1308,6 @@ static struct davinci_soc_info davinci_soc_info_da850 = {
 	.intc_irq_prios		= da850_default_priorities,
 	.intc_irq_num		= DA850_N_CP_INTC_IRQ,
 	.timer_info		= &da850_timer_info,
-	.gpio_type		= GPIO_TYPE_DAVINCI,
-	.gpio_base		= DA8XX_GPIO_BASE,
-	.gpio_num		= 144,
-	.gpio_irq		= IRQ_DA8XX_GPIO0,
 	.emac_pdata		= &da8xx_emac_pdata,
 	.sram_dma		= DA8XX_SHARED_RAM_BASE,
 	.sram_len		= SZ_128K,
diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h
index 2ab5d577186..2eebc433880 100644
--- a/arch/arm/mach-davinci/davinci.h
+++ b/arch/arm/mach-davinci/davinci.h
@@ -53,6 +53,9 @@ extern void __iomem *davinci_sysmod_base;
 #define DAVINCI_SYSMOD_VIRT(x)	(davinci_sysmod_base + (x))
 void davinci_map_sysmod(void);
 
+#define DAVINCI_GPIO_BASE 0x01C67000
+int davinci_gpio_register(struct resource *res, int size, void *pdata);
+
 /* DM355 base addresses */
 #define DM355_ASYNC_EMIF_CONTROL_BASE	0x01e10000
 #define DM355_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
@@ -82,6 +85,7 @@ void dm355_init_spi0(unsigned chipselect_mask,
 		const struct spi_board_info *info, unsigned len);
 void dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata);
 int dm355_init_video(struct vpfe_config *, struct vpbe_config *);
+int dm355_gpio_register(void);
 
 /* DM365 function declarations */
 void dm365_init(void);
@@ -92,11 +96,13 @@ void dm365_init_rtc(void);
 void dm365_init_spi0(unsigned chipselect_mask,
 			const struct spi_board_info *info, unsigned len);
 int dm365_init_video(struct vpfe_config *, struct vpbe_config *);
+int dm365_gpio_register(void);
 
 /* DM644x function declarations */
 void dm644x_init(void);
 void dm644x_init_asp(struct snd_platform_data *pdata);
 int dm644x_init_video(struct vpfe_config *, struct vpbe_config *);
+int dm644x_gpio_register(void);
 
 /* DM646x function declarations */
 void dm646x_init(void);
@@ -106,6 +112,7 @@ int dm646x_init_edma(struct edma_rsv_info *rsv);
 void dm646x_video_init(void);
 void dm646x_setup_vpif(struct vpif_display_config *,
 		       struct vpif_capture_config *);
+int dm646x_gpio_register(void);
 
 extern struct platform_device dm365_serial_device[];
 extern struct platform_device dm355_serial_device[];
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 2e473fefd71..c46eccbbd51 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -665,6 +665,32 @@ int __init da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata)
 	return platform_device_register(&da8xx_lcdc_device);
 }
 
+static struct resource da8xx_gpio_resources[] = {
+	{ /* registers */
+		.start	= DA8XX_GPIO_BASE,
+		.end	= DA8XX_GPIO_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{ /* interrupt */
+		.start	= IRQ_DA8XX_GPIO0,
+		.end	= IRQ_DA8XX_GPIO8,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device da8xx_gpio_device = {
+	.name		= "davinci_gpio",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(da8xx_gpio_resources),
+	.resource	= da8xx_gpio_resources,
+};
+
+int __init da8xx_register_gpio(void *pdata)
+{
+	da8xx_gpio_device.dev.platform_data = pdata;
+	return platform_device_register(&da8xx_gpio_device);
+}
+
 static struct resource da8xx_mmcsd0_resources[] = {
 	{		/* registers */
 		.start	= DA8XX_MMCSD0_BASE,
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index 111573c0aad..3996e98f52f 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -318,6 +318,19 @@ static void davinci_init_wdt(void)
 	platform_device_register(&davinci_wdt_device);
 }
 
+static struct platform_device davinci_gpio_device = {
+	.name	= "davinci_gpio",
+	.id	= -1,
+};
+
+int davinci_gpio_register(struct resource *res, int size, void *pdata)
+{
+	davinci_gpio_device.resource = res;
+	davinci_gpio_device.num_resources = size;
+	davinci_gpio_device.dev.platform_data = pdata;
+	return platform_device_register(&davinci_gpio_device);
+}
+
 /*-------------------------------------------------------------------------*/
 
 /*-------------------------------------------------------------------------*/
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 3eaa5f6b216..ef9ff1fb6f5 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -13,8 +13,10 @@
 #include <linux/serial_8250.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
-
 #include <linux/spi/spi.h>
+#include <linux/platform_data/edma.h>
+#include <linux/platform_data/gpio-davinci.h>
+#include <linux/platform_data/spi-davinci.h>
 
 #include <asm/mach/map.h>
 
@@ -25,9 +27,6 @@
 #include <mach/time.h>
 #include <mach/serial.h>
 #include <mach/common.h>
-#include <linux/platform_data/spi-davinci.h>
-#include <mach/gpio-davinci.h>
-#include <linux/platform_data/edma.h>
 
 #include "davinci.h"
 #include "clock.h"
@@ -886,6 +885,30 @@ static struct platform_device dm355_vpbe_dev = {
 	},
 };
 
+static struct resource dm355_gpio_resources[] = {
+	{	/* registers */
+		.start	= DAVINCI_GPIO_BASE,
+		.end	= DAVINCI_GPIO_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{	/* interrupt */
+		.start	= IRQ_DM355_GPIOBNK0,
+		.end	= IRQ_DM355_GPIOBNK6,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct davinci_gpio_platform_data dm355_gpio_platform_data = {
+	.ngpio		= 104,
+	.intc_irq_num	= DAVINCI_N_AINTC_IRQ,
+};
+
+int __init dm355_gpio_register(void)
+{
+	return davinci_gpio_register(dm355_gpio_resources,
+				     sizeof(dm355_gpio_resources),
+				     &dm355_gpio_platform_data);
+}
 /*----------------------------------------------------------------------*/
 
 static struct map_desc dm355_io_desc[] = {
@@ -1005,10 +1028,6 @@ static struct davinci_soc_info davinci_soc_info_dm355 = {
 	.intc_irq_prios		= dm355_default_priorities,
 	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
 	.timer_info		= &dm355_timer_info,
-	.gpio_type		= GPIO_TYPE_DAVINCI,
-	.gpio_base		= DAVINCI_GPIO_BASE,
-	.gpio_num		= 104,
-	.gpio_irq		= IRQ_DM355_GPIOBNK0,
 	.sram_dma		= 0x00010000,
 	.sram_len		= SZ_32K,
 };
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index c29e324eb0b..1511a0680f9 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -19,6 +19,9 @@
 #include <linux/dma-mapping.h>
 #include <linux/spi/spi.h>
 #include <linux/platform_data/edma.h>
+#include <linux/platform_data/gpio-davinci.h>
+#include <linux/platform_data/keyscan-davinci.h>
+#include <linux/platform_data/spi-davinci.h>
 
 #include <asm/mach/map.h>
 
@@ -29,9 +32,6 @@
 #include <mach/time.h>
 #include <mach/serial.h>
 #include <mach/common.h>
-#include <linux/platform_data/keyscan-davinci.h>
-#include <linux/platform_data/spi-davinci.h>
-#include <mach/gpio-davinci.h>
 
 #include "davinci.h"
 #include "clock.h"
@@ -698,6 +698,32 @@ void __init dm365_init_spi0(unsigned chipselect_mask,
 	platform_device_register(&dm365_spi0_device);
 }
 
+static struct resource dm365_gpio_resources[] = {
+	{	/* registers */
+		.start	= DAVINCI_GPIO_BASE,
+		.end	= DAVINCI_GPIO_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{	/* interrupt */
+		.start	= IRQ_DM365_GPIO0,
+		.end	= IRQ_DM365_GPIO7,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct davinci_gpio_platform_data dm365_gpio_platform_data = {
+	.ngpio		= 104,
+	.intc_irq_num	= DAVINCI_N_AINTC_IRQ,
+	.gpio_unbanked	= 8,
+};
+
+int __init dm365_gpio_register(void)
+{
+	return davinci_gpio_register(dm365_gpio_resources,
+				     sizeof(dm365_gpio_resources),
+				     &dm365_gpio_platform_data);
+}
+
 static struct emac_platform_data dm365_emac_pdata = {
 	.ctrl_reg_offset	= DM365_EMAC_CNTRL_OFFSET,
 	.ctrl_mod_reg_offset	= DM365_EMAC_CNTRL_MOD_OFFSET,
@@ -1105,11 +1131,6 @@ static struct davinci_soc_info davinci_soc_info_dm365 = {
 	.intc_irq_prios		= dm365_default_priorities,
 	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
 	.timer_info		= &dm365_timer_info,
-	.gpio_type		= GPIO_TYPE_DAVINCI,
-	.gpio_base		= DAVINCI_GPIO_BASE,
-	.gpio_num		= 104,
-	.gpio_irq		= IRQ_DM365_GPIO0,
-	.gpio_unbanked		= 8,	/* really 16 ... skip muxed GPIOs */
 	.emac_pdata		= &dm365_emac_pdata,
 	.sram_dma		= 0x00010000,
 	.sram_len		= SZ_32K,
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 4f74682293d..143a3217e8e 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -13,6 +13,7 @@
 #include <linux/serial_8250.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/edma.h>
+#include <linux/platform_data/gpio-davinci.h>
 
 #include <asm/mach/map.h>
 
@@ -23,7 +24,6 @@
 #include <mach/time.h>
 #include <mach/serial.h>
 #include <mach/common.h>
-#include <mach/gpio-davinci.h>
 
 #include "davinci.h"
 #include "clock.h"
@@ -771,6 +771,30 @@ static struct platform_device dm644x_vpbe_dev = {
 	},
 };
 
+static struct resource dm644_gpio_resources[] = {
+	{	/* registers */
+		.start	= DAVINCI_GPIO_BASE,
+		.end	= DAVINCI_GPIO_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{	/* interrupt */
+		.start	= IRQ_GPIOBNK0,
+		.end	= IRQ_GPIOBNK4,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct davinci_gpio_platform_data dm644_gpio_platform_data = {
+	.ngpio		= 71,
+	.intc_irq_num	= DAVINCI_N_AINTC_IRQ,
+};
+
+int __init dm644x_gpio_register(void)
+{
+	return davinci_gpio_register(dm644_gpio_resources,
+				     sizeof(dm644_gpio_resources),
+				     &dm644_gpio_platform_data);
+}
 /*----------------------------------------------------------------------*/
 
 static struct map_desc dm644x_io_desc[] = {
@@ -897,10 +921,6 @@ static struct davinci_soc_info davinci_soc_info_dm644x = {
 	.intc_irq_prios 	= dm644x_default_priorities,
 	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
 	.timer_info		= &dm644x_timer_info,
-	.gpio_type		= GPIO_TYPE_DAVINCI,
-	.gpio_base		= DAVINCI_GPIO_BASE,
-	.gpio_num		= 71,
-	.gpio_irq		= IRQ_GPIOBNK0,
 	.emac_pdata		= &dm644x_emac_pdata,
 	.sram_dma		= 0x00008000,
 	.sram_len		= SZ_16K,
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 68f8d1f1aca..2a73f299c1d 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -14,6 +14,7 @@
 #include <linux/serial_8250.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/edma.h>
+#include <linux/platform_data/gpio-davinci.h>
 
 #include <asm/mach/map.h>
 
@@ -24,7 +25,6 @@
 #include <mach/time.h>
 #include <mach/serial.h>
 #include <mach/common.h>
-#include <mach/gpio-davinci.h>
 
 #include "davinci.h"
 #include "clock.h"
@@ -748,6 +748,30 @@ static struct platform_device vpif_capture_dev = {
 	.num_resources	= ARRAY_SIZE(vpif_capture_resource),
 };
 
+static struct resource dm646x_gpio_resources[] = {
+	{	/* registers */
+		.start	= DAVINCI_GPIO_BASE,
+		.end	= DAVINCI_GPIO_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{	/* interrupt */
+		.start	= IRQ_DM646X_GPIOBNK0,
+		.end	= IRQ_DM646X_GPIOBNK2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct davinci_gpio_platform_data dm646x_gpio_platform_data = {
+	.ngpio		= 43,
+	.intc_irq_num	= DAVINCI_N_AINTC_IRQ,
+};
+
+int __init dm646x_gpio_register(void)
+{
+	return davinci_gpio_register(dm646x_gpio_resources,
+				     sizeof(dm646x_gpio_resources),
+				     &dm646x_gpio_platform_data);
+}
 /*----------------------------------------------------------------------*/
 
 static struct map_desc dm646x_io_desc[] = {
@@ -874,10 +898,6 @@ static struct davinci_soc_info davinci_soc_info_dm646x = {
 	.intc_irq_prios		= dm646x_default_priorities,
 	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
 	.timer_info		= &dm646x_timer_info,
-	.gpio_type		= GPIO_TYPE_DAVINCI,
-	.gpio_base		= DAVINCI_GPIO_BASE,
-	.gpio_num		= 43, /* Only 33 usable */
-	.gpio_irq		= IRQ_DM646X_GPIOBNK0,
 	.emac_pdata		= &dm646x_emac_pdata,
 	.sram_dma		= 0x10010000,
 	.sram_len		= SZ_32K,
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index aae53072c0e..39e58b48e82 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -97,6 +97,7 @@ int da8xx_register_mmcsd0(struct davinci_mmc_config *config);
 int da850_register_mmcsd1(struct davinci_mmc_config *config);
 void da8xx_register_mcasp(int id, struct snd_platform_data *pdata);
 int da8xx_register_rtc(void);
+int da8xx_register_gpio(void *pdata);
 int da850_register_cpufreq(char *async_clk);
 int da8xx_register_cpuidle(void);
 void __iomem *da8xx_get_mem_ctlr(void);
@@ -110,6 +111,8 @@ int da850_register_vpif_capture
 void da8xx_restart(enum reboot_mode mode, const char *cmd);
 void da8xx_rproc_reserve_cma(void);
 int da8xx_register_rproc(void);
+int da850_register_gpio(void);
+int da830_register_gpio(void);
 
 extern struct platform_device da8xx_serial_device[];
 extern struct emac_platform_data da8xx_emac_pdata;
diff --git a/arch/arm/mach-davinci/include/mach/gpio-davinci.h b/arch/arm/mach-davinci/include/mach/gpio-davinci.h
deleted file mode 100644
index 1fdd1fd3544..00000000000
--- a/arch/arm/mach-davinci/include/mach/gpio-davinci.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * TI DaVinci GPIO Support
- *
- * Copyright (c) 2006 David Brownell
- * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef	__DAVINCI_DAVINCI_GPIO_H
-#define	__DAVINCI_DAVINCI_GPIO_H
-
-#include <linux/io.h>
-#include <linux/spinlock.h>
-
-#include <asm-generic/gpio.h>
-
-#include <mach/irqs.h>
-#include <mach/common.h>
-
-#define DAVINCI_GPIO_BASE 0x01C67000
-
-enum davinci_gpio_type {
-	GPIO_TYPE_DAVINCI = 0,
-	GPIO_TYPE_TNETV107X,
-};
-
-/*
- * basic gpio routines
- *
- * board-specific init should be done by arch/.../.../board-XXX.c (maybe
- * initializing banks together) rather than boot loaders; kexec() won't
- * go through boot loaders.
- *
- * the gpio clock will be turned on when gpios are used, and you may also
- * need to pay attention to PINMUX registers to be sure those pins are
- * used as gpios, not with other peripherals.
- *
- * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1).  For documentation,
- * and maybe for later updates, code may write GPIO(N).  These may be
- * all 1.8V signals, all 3.3V ones, or a mix of the two.  A given chip
- * may not support all the GPIOs in that range.
- *
- * GPIOs can also be on external chips, numbered after the ones built-in
- * to the DaVinci chip.  For now, they won't be usable as IRQ sources.
- */
-#define	GPIO(X)		(X)		/* 0 <= X <= (DAVINCI_N_GPIO - 1) */
-
-/* Convert GPIO signal to GPIO pin number */
-#define GPIO_TO_PIN(bank, gpio)	(16 * (bank) + (gpio))
-
-struct davinci_gpio_controller {
-	struct gpio_chip	chip;
-	int			irq_base;
-	spinlock_t		lock;
-	void __iomem		*regs;
-	void __iomem		*set_data;
-	void __iomem		*clr_data;
-	void __iomem		*in_data;
-};
-
-/* The __gpio_to_controller() and __gpio_mask() functions inline to constants
- * with constant parameters; or in outlined code they execute at runtime.
- *
- * You'd access the controller directly when reading or writing more than
- * one gpio value at a time, and to support wired logic where the value
- * being driven by the cpu need not match the value read back.
- *
- * These are NOT part of the cross-platform GPIO interface
- */
-static inline struct davinci_gpio_controller *
-__gpio_to_controller(unsigned gpio)
-{
-	struct davinci_gpio_controller *ctlrs = davinci_soc_info.gpio_ctlrs;
-	int index = gpio / 32;
-
-	if (!ctlrs || index >= davinci_soc_info.gpio_ctlrs_num)
-		return NULL;
-
-	return ctlrs + index;
-}
-
-static inline u32 __gpio_mask(unsigned gpio)
-{
-	return 1 << (gpio % 32);
-}
-
-#endif	/* __DAVINCI_DAVINCI_GPIO_H */
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
deleted file mode 100644
index 960e9de47e1..00000000000
--- a/arch/arm/mach-davinci/include/mach/gpio.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * TI DaVinci GPIO Support
- *
- * Copyright (c) 2006 David Brownell
- * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef	__DAVINCI_GPIO_H
-#define	__DAVINCI_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-#define __ARM_GPIOLIB_COMPLEX
-
-/* The inline versions use the static inlines in the driver header */
-#include "gpio-davinci.h"
-
-/*
- * The get/set/clear functions will inline when called with constant
- * parameters referencing built-in GPIOs, for low-overhead bitbanging.
- *
- * gpio_set_value() will inline only on traditional Davinci style controllers
- * with distinct set/clear registers.
- *
- * Otherwise, calls with variable parameters or referencing external
- * GPIOs (e.g. on GPIO expander chips) use outlined functions.
- */
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	if (__builtin_constant_p(value) && gpio < davinci_soc_info.gpio_num) {
-		struct davinci_gpio_controller *ctlr;
-		u32				mask;
-
-		ctlr = __gpio_to_controller(gpio);
-
-		if (ctlr->set_data != ctlr->clr_data) {
-			mask = __gpio_mask(gpio);
-			if (value)
-				__raw_writel(mask, ctlr->set_data);
-			else
-				__raw_writel(mask, ctlr->clr_data);
-			return;
-		}
-	}
-
-	__gpio_set_value(gpio, value);
-}
-
-/* Returns zero or nonzero; works for gpios configured as inputs OR
- * as outputs, at least for built-in GPIOs.
- *
- * NOTE: for built-in GPIOs, changes in reported values are synchronized
- * to the GPIO clock.  This is easily seen after calling gpio_set_value()
- * and then immediately gpio_get_value(), where the gpio_get_value() will
- * return the old value until the GPIO clock ticks and the new value gets
- * latched.
- */
-static inline int gpio_get_value(unsigned gpio)
-{
-	struct davinci_gpio_controller *ctlr;
-
-	if (!__builtin_constant_p(gpio) || gpio >= davinci_soc_info.gpio_num)
-		return __gpio_get_value(gpio);
-
-	ctlr = __gpio_to_controller(gpio);
-	return __gpio_mask(gpio) & __raw_readl(ctlr->in_data);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
-	if (__builtin_constant_p(gpio) && gpio < davinci_soc_info.gpio_num)
-		return 0;
-	else
-		return __gpio_cansleep(gpio);
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	/* don't support the reverse mapping */
-	return -ENOSYS;
-}
-
-#endif				/* __DAVINCI_GPIO_H */
diff --git a/arch/arm/mach-dove/board-dt.c b/arch/arm/mach-dove/board-dt.c
index ddb86631f16..49fa9abd09d 100644
--- a/arch/arm/mach-dove/board-dt.c
+++ b/arch/arm/mach-dove/board-dt.c
@@ -19,35 +19,6 @@
 #include <plat/common.h>
 #include "common.h"
 
-/*
- * There are still devices that doesn't even know about DT,
- * get clock gates here and add a clock lookup.
- */
-static void __init dove_legacy_clk_init(void)
-{
-	struct device_node *np = of_find_compatible_node(NULL, NULL,
-					 "marvell,dove-gating-clock");
-	struct of_phandle_args clkspec;
-
-	clkspec.np = np;
-	clkspec.args_count = 1;
-
-	clkspec.args[0] = CLOCK_GATING_BIT_PCIE0;
-	orion_clkdev_add("0", "pcie",
-			 of_clk_get_from_provider(&clkspec));
-
-	clkspec.args[0] = CLOCK_GATING_BIT_PCIE1;
-	orion_clkdev_add("1", "pcie",
-			 of_clk_get_from_provider(&clkspec));
-}
-
-static void __init dove_dt_init_early(void)
-{
-	mvebu_mbus_init("marvell,dove-mbus",
-			BRIDGE_WINS_BASE, BRIDGE_WINS_SZ,
-			DOVE_MC_WINS_BASE, DOVE_MC_WINS_SZ);
-}
-
 static void __init dove_dt_init(void)
 {
 	pr_info("Dove 88AP510 SoC\n");
@@ -55,14 +26,7 @@ static void __init dove_dt_init(void)
 #ifdef CONFIG_CACHE_TAUROS2
 	tauros2_init(0);
 #endif
-	dove_setup_cpu_wins();
-
-	/* Setup clocks for legacy devices */
-	dove_legacy_clk_init();
-
-	/* Internal devices not ported to DT yet */
-	dove_pcie_init(1, 1);
-
+	BUG_ON(mvebu_mbus_dt_init());
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
@@ -73,7 +37,6 @@ static const char * const dove_dt_board_compat[] = {
 
 DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)")
 	.map_io		= dove_map_io,
-	.init_early	= dove_dt_init_early,
 	.init_machine	= dove_dt_init,
 	.restart	= dove_restart,
 	.dt_compat	= dove_dt_board_compat,
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index dba2173e70f..8f1d327e0cd 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -28,6 +28,7 @@ config CPU_S3C2410
 	select CPU_ARM920T
 	select CPU_LLSERIAL_S3C2410
 	select S3C2410_CLOCK
+	select S3C2410_DMA if S3C24XX_DMA
 	select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ
 	select S3C2410_PM if PM
 	select SAMSUNG_WDT_RESET
@@ -70,6 +71,7 @@ config CPU_S3C2442
 	select CPU_ARM920T
 	select CPU_LLSERIAL_S3C2440
 	select S3C2410_CLOCK
+	select S3C2410_DMA if S3C24XX_DMA
 	select S3C2410_PM if PM
 	help
 	  Support for S3C2442 Samsung Mobile CPU based systems.
@@ -148,7 +150,6 @@ config S3C2410_DMA_DEBUG
 config S3C2410_DMA
 	bool
 	depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442)
-	default y if CPU_S3C2410 || CPU_S3C2442
 	help
 	  DMA device selection for S3C2410 and compatible CPUs
 
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2412.c b/arch/arm/mach-s3c24xx/clock-s3c2412.c
index d8f253f2b48..11b3b28457b 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2412.c
@@ -484,22 +484,22 @@ static struct clk init_clocks_disable[] = {
 
 static struct clk init_clocks[] = {
 	{
-		.name		= "dma",
+		.name		= "dma.0",
 		.parent		= &clk_h,
 		.enable		= s3c2412_clkcon_enable,
 		.ctrlbit	= S3C2412_CLKCON_DMA0,
 	}, {
-		.name		= "dma",
+		.name		= "dma.1",
 		.parent		= &clk_h,
 		.enable		= s3c2412_clkcon_enable,
 		.ctrlbit	= S3C2412_CLKCON_DMA1,
 	}, {
-		.name		= "dma",
+		.name		= "dma.2",
 		.parent		= &clk_h,
 		.enable		= s3c2412_clkcon_enable,
 		.ctrlbit	= S3C2412_CLKCON_DMA2,
 	}, {
-		.name		= "dma",
+		.name		= "dma.3",
 		.parent		= &clk_h,
 		.enable		= s3c2412_clkcon_enable,
 		.ctrlbit	= S3C2412_CLKCON_DMA3,
diff --git a/arch/arm/mach-s3c24xx/common-s3c2443.c b/arch/arm/mach-s3c24xx/common-s3c2443.c
index f6b9f2ef01b..65d3eef7309 100644
--- a/arch/arm/mach-s3c24xx/common-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/common-s3c2443.c
@@ -438,32 +438,32 @@ static struct clk init_clocks_off[] = {
 
 static struct clk init_clocks[] = {
 	{
-		.name		= "dma",
+		.name		= "dma.0",
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_DMA0,
 	}, {
-		.name		= "dma",
+		.name		= "dma.1",
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_DMA1,
 	}, {
-		.name		= "dma",
+		.name		= "dma.2",
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_DMA2,
 	}, {
-		.name		= "dma",
+		.name		= "dma.3",
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_DMA3,
 	}, {
-		.name		= "dma",
+		.name		= "dma.4",
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_DMA4,
 	}, {
-		.name		= "dma",
+		.name		= "dma.5",
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_DMA5,
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
index 457261c9843..4adaa4b43ff 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -31,6 +31,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/io.h>
+#include <linux/platform_data/dma-s3c24xx.h>
 
 #include <mach/hardware.h>
 #include <mach/regs-clock.h>
@@ -44,6 +45,7 @@
 
 #include <mach/regs-gpio.h>
 #include <plat/regs-serial.h>
+#include <mach/dma.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
@@ -329,3 +331,207 @@ void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk,
 	clk_p.rate = pclk;
 	clk_f.rate = fclk;
 }
+
+#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
+	defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
+static struct resource s3c2410_dma_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA),
+	[1] = DEFINE_RES_IRQ(IRQ_DMA0),
+	[2] = DEFINE_RES_IRQ(IRQ_DMA1),
+	[3] = DEFINE_RES_IRQ(IRQ_DMA2),
+	[4] = DEFINE_RES_IRQ(IRQ_DMA3),
+};
+#endif
+
+#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2442)
+static struct s3c24xx_dma_channel s3c2410_dma_channels[DMACH_MAX] = {
+	[DMACH_XD0] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 0), },
+	[DMACH_XD1] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 1), },
+	[DMACH_SDI] = { S3C24XX_DMA_APB, false, S3C24XX_DMA_CHANREQ(2, 0) |
+						S3C24XX_DMA_CHANREQ(2, 2) |
+						S3C24XX_DMA_CHANREQ(1, 3),
+	},
+	[DMACH_SPI0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 1), },
+	[DMACH_SPI1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 3), },
+	[DMACH_UART0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 0), },
+	[DMACH_UART1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 1), },
+	[DMACH_UART2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 3), },
+	[DMACH_TIMER] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 0) |
+						 S3C24XX_DMA_CHANREQ(3, 2) |
+						 S3C24XX_DMA_CHANREQ(3, 3),
+	},
+	[DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 1) |
+						  S3C24XX_DMA_CHANREQ(1, 2),
+	},
+	[DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 2), },
+	[DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 0), },
+	[DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 1), },
+	[DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 2), },
+	[DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), },
+};
+
+static struct s3c24xx_dma_platdata s3c2410_dma_platdata = {
+	.num_phy_channels = 4,
+	.channels = s3c2410_dma_channels,
+	.num_channels = DMACH_MAX,
+};
+
+struct platform_device s3c2410_device_dma = {
+	.name		= "s3c2410-dma",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c2410_dma_resource),
+	.resource	= s3c2410_dma_resource,
+	.dev	= {
+		.platform_data	= &s3c2410_dma_platdata,
+	},
+};
+#endif
+
+#ifdef CONFIG_CPU_S3C2412
+static struct s3c24xx_dma_channel s3c2412_dma_channels[DMACH_MAX] = {
+	[DMACH_XD0] = { S3C24XX_DMA_AHB, true, 17 },
+	[DMACH_XD1] = { S3C24XX_DMA_AHB, true, 18 },
+	[DMACH_SDI] = { S3C24XX_DMA_APB, false, 10 },
+	[DMACH_SPI0_RX] = { S3C24XX_DMA_APB, true, 1 },
+	[DMACH_SPI0_TX] = { S3C24XX_DMA_APB, true, 0 },
+	[DMACH_SPI1_RX] = { S3C24XX_DMA_APB, true, 3 },
+	[DMACH_SPI1_TX] = { S3C24XX_DMA_APB, true, 2 },
+	[DMACH_UART0] = { S3C24XX_DMA_APB, true, 19 },
+	[DMACH_UART1] = { S3C24XX_DMA_APB, true, 21 },
+	[DMACH_UART2] = { S3C24XX_DMA_APB, true, 23 },
+	[DMACH_UART0_SRC2] = { S3C24XX_DMA_APB, true, 20 },
+	[DMACH_UART1_SRC2] = { S3C24XX_DMA_APB, true, 22 },
+	[DMACH_UART2_SRC2] = { S3C24XX_DMA_APB, true, 24 },
+	[DMACH_TIMER] = { S3C24XX_DMA_APB, true, 9 },
+	[DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, 5 },
+	[DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, 4 },
+	[DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, 13 },
+	[DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, 14 },
+	[DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, 15 },
+	[DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, 16 },
+};
+
+static struct s3c24xx_dma_platdata s3c2412_dma_platdata = {
+	.num_phy_channels = 4,
+	.channels = s3c2412_dma_channels,
+	.num_channels = DMACH_MAX,
+};
+
+struct platform_device s3c2412_device_dma = {
+	.name		= "s3c2412-dma",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c2410_dma_resource),
+	.resource	= s3c2410_dma_resource,
+	.dev	= {
+		.platform_data	= &s3c2412_dma_platdata,
+	},
+};
+#endif
+
+#if defined(CONFIG_CPU_S3C2440)
+static struct s3c24xx_dma_channel s3c2440_dma_channels[DMACH_MAX] = {
+	[DMACH_XD0] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 0), },
+	[DMACH_XD1] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 1), },
+	[DMACH_SDI] = { S3C24XX_DMA_APB, false, S3C24XX_DMA_CHANREQ(2, 0) |
+						S3C24XX_DMA_CHANREQ(6, 1) |
+						S3C24XX_DMA_CHANREQ(2, 2) |
+						S3C24XX_DMA_CHANREQ(1, 3),
+	},
+	[DMACH_SPI0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 1), },
+	[DMACH_SPI1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 3), },
+	[DMACH_UART0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 0), },
+	[DMACH_UART1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 1), },
+	[DMACH_UART2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 3), },
+	[DMACH_TIMER] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 0) |
+						 S3C24XX_DMA_CHANREQ(3, 2) |
+						 S3C24XX_DMA_CHANREQ(3, 3),
+	},
+	[DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 1) |
+						  S3C24XX_DMA_CHANREQ(1, 2),
+	},
+	[DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(5, 0) |
+						   S3C24XX_DMA_CHANREQ(0, 2),
+	},
+	[DMACH_PCM_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(6, 0) |
+						  S3C24XX_DMA_CHANREQ(5, 2),
+	},
+	[DMACH_PCM_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(5, 1) |
+						  S3C24XX_DMA_CHANREQ(6, 3),
+	},
+	[DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(6, 2) |
+						  S3C24XX_DMA_CHANREQ(5, 3),
+	},
+	[DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 0), },
+	[DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 1), },
+	[DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 2), },
+	[DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), },
+};
+
+static struct s3c24xx_dma_platdata s3c2440_dma_platdata = {
+	.num_phy_channels = 4,
+	.channels = s3c2440_dma_channels,
+	.num_channels = DMACH_MAX,
+};
+
+struct platform_device s3c2440_device_dma = {
+	.name		= "s3c2410-dma",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c2410_dma_resource),
+	.resource	= s3c2410_dma_resource,
+	.dev	= {
+		.platform_data	= &s3c2440_dma_platdata,
+	},
+};
+#endif
+
+#if defined(CONFIG_CPUS_3C2443) || defined(CONFIG_CPU_S3C2416)
+static struct resource s3c2443_dma_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA),
+	[1] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA0),
+	[2] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA1),
+	[3] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA2),
+	[4] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA3),
+	[5] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA4),
+	[6] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA5),
+};
+
+static struct s3c24xx_dma_channel s3c2443_dma_channels[DMACH_MAX] = {
+	[DMACH_XD0] = { S3C24XX_DMA_AHB, true, 17 },
+	[DMACH_XD1] = { S3C24XX_DMA_AHB, true, 18 },
+	[DMACH_SDI] = { S3C24XX_DMA_APB, false, 10 },
+	[DMACH_SPI0_RX] = { S3C24XX_DMA_APB, true, 1 },
+	[DMACH_SPI0_TX] = { S3C24XX_DMA_APB, true, 0 },
+	[DMACH_SPI1_RX] = { S3C24XX_DMA_APB, true, 3 },
+	[DMACH_SPI1_TX] = { S3C24XX_DMA_APB, true, 2 },
+	[DMACH_UART0] = { S3C24XX_DMA_APB, true, 19 },
+	[DMACH_UART1] = { S3C24XX_DMA_APB, true, 21 },
+	[DMACH_UART2] = { S3C24XX_DMA_APB, true, 23 },
+	[DMACH_UART3] = { S3C24XX_DMA_APB, true, 25 },
+	[DMACH_UART0_SRC2] = { S3C24XX_DMA_APB, true, 20 },
+	[DMACH_UART1_SRC2] = { S3C24XX_DMA_APB, true, 22 },
+	[DMACH_UART2_SRC2] = { S3C24XX_DMA_APB, true, 24 },
+	[DMACH_UART3_SRC2] = { S3C24XX_DMA_APB, true, 26 },
+	[DMACH_TIMER] = { S3C24XX_DMA_APB, true, 9 },
+	[DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, 5 },
+	[DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, 4 },
+	[DMACH_PCM_IN] = { S3C24XX_DMA_APB, true, 28 },
+	[DMACH_PCM_OUT] = { S3C24XX_DMA_APB, true, 27 },
+	[DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, 29 },
+};
+
+static struct s3c24xx_dma_platdata s3c2443_dma_platdata = {
+	.num_phy_channels = 6,
+	.channels = s3c2443_dma_channels,
+	.num_channels = DMACH_MAX,
+};
+
+struct platform_device s3c2443_device_dma = {
+	.name		= "s3c2443-dma",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c2443_dma_resource),
+	.resource	= s3c2443_dma_resource,
+	.dev	= {
+		.platform_data	= &s3c2443_dma_platdata,
+	},
+};
+#endif
diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h
index 84b280654f4..e46c1041721 100644
--- a/arch/arm/mach-s3c24xx/common.h
+++ b/arch/arm/mach-s3c24xx/common.h
@@ -109,4 +109,9 @@ extern void s3c2443_init_irq(void);
 
 extern struct syscore_ops s3c24xx_irq_syscore_ops;
 
+extern struct platform_device s3c2410_device_dma;
+extern struct platform_device s3c2412_device_dma;
+extern struct platform_device s3c2440_device_dma;
+extern struct platform_device s3c2443_device_dma;
+
 #endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */
diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
index a45fcd8ccf7..43c23e220f5 100644
--- a/arch/arm/mach-s3c24xx/mach-jive.c
+++ b/arch/arm/mach-s3c24xx/mach-jive.c
@@ -466,6 +466,7 @@ static struct platform_device *jive_devices[] __initdata = {
 	&jive_device_wm8750,
 	&s3c_device_nand,
 	&s3c_device_usbgadget,
+	&s3c2412_device_dma,
 };
 
 static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = {
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c
index 8146e920f10..c9d31ef28dd 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2413.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c
@@ -89,6 +89,7 @@ static struct platform_device *smdk2413_devices[] __initdata = {
 	&s3c_device_i2c0,
 	&s3c_device_iis,
 	&s3c_device_usbgadget,
+	&s3c2412_device_dma,
 };
 
 static void __init smdk2413_fixup(struct tag *tags, char **cmdline,
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c
index cb46847c66b..f88e672ad1e 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2416.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c
@@ -215,6 +215,7 @@ static struct platform_device *smdk2416_devices[] __initdata = {
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc1,
 	&s3c_device_usb_hsudc,
+	&s3c2443_device_dma,
 };
 
 static void __init smdk2416_map_io(void)
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c
index 9435c3bef18..d9933fcc6cc 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2443.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c
@@ -115,6 +115,7 @@ static struct platform_device *smdk2443_devices[] __initdata = {
 #ifdef CONFIG_SND_SOC_SMDK2443_WM9710
 	&s3c_device_ac97,
 #endif
+	&s3c2443_device_dma,
 };
 
 static void __init smdk2443_map_io(void)
diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c
index b66588428ec..f7ec9c55078 100644
--- a/arch/arm/mach-s3c24xx/mach-vstms.c
+++ b/arch/arm/mach-s3c24xx/mach-vstms.c
@@ -126,6 +126,7 @@ static struct platform_device *vstms_devices[] __initdata = {
 	&s3c_device_iis,
 	&s3c_device_rtc,
 	&s3c_device_nand,
+	&s3c2412_device_dma,
 };
 
 static void __init vstms_fixup(struct tag *tags, char **cmdline,
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 25f40c9b7f6..99a3590f034 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -32,6 +32,7 @@
 #include <linux/ioport.h>
 #include <linux/platform_data/s3c-hsudc.h>
 #include <linux/platform_data/s3c-hsotg.h>
+#include <linux/platform_data/dma-s3c24xx.h>
 
 #include <media/s5p_hdmi.h>
 
@@ -1465,8 +1466,10 @@ void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
 	pd.num_cs = num_cs;
 	pd.src_clk_nr = src_clk_nr;
 	pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio;
-#ifdef CONFIG_PL330_DMA
+#if defined(CONFIG_PL330_DMA)
 	pd.filter = pl330_filter;
+#elif defined(CONFIG_S3C24XX_DMAC)
+	pd.filter = s3c24xx_dma_filter;
 #endif
 
 	s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi0);