1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
|
/*
* smdk_wm8580.c
*
* Copyright (c) 2009 Samsung Electronics Co. Ltd
* Author: Jaswinder Singh <jassisinghbrar@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/module.h>
#include <sound/soc.h>
#include <sound/pcm_params.h>
#include "../codecs/wm8580.h"
#include "i2s.h"
/*
* Default CFG switch settings to use this driver:
*
* SMDK6410: Set CFG1 1-3 Off, CFG2 1-4 On
*/
/* SMDK has a 12MHZ crystal attached to WM8580 */
#define SMDK_WM8580_FREQ 12000000
static int smdk_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *codec_dai = rtd->codec_dai;
unsigned int pll_out;
int rfs, ret;
switch (params_width(params)) {
case 8:
case 16:
break;
default:
return -EINVAL;
}
/* The Fvco for WM8580 PLLs must fall within [90,100]MHz.
* This criterion can't be met if we request PLL output
* as {8000x256, 64000x256, 11025x256}Hz.
* As a wayout, we rather change rfs to a minimum value that
* results in (params_rate(params) * rfs), and itself, acceptable
* to both - the CODEC and the CPU.
*/
switch (params_rate(params)) {
case 16000:
case 22050:
case 32000:
case 44100:
case 48000:
case 88200:
case 96000:
rfs = 256;
break;
case 64000:
rfs = 384;
break;
case 8000:
case 11025:
rfs = 512;
break;
default:
return -EINVAL;
}
pll_out = params_rate(params) * rfs;
/* Set WM8580 to drive MCLK from its PLLA */
ret = snd_soc_dai_set_clkdiv(codec_dai, WM8580_MCLK,
WM8580_CLKSRC_PLLA);
if (ret < 0)
return ret;
ret = snd_soc_dai_set_pll(codec_dai, WM8580_PLLA, 0,
SMDK_WM8580_FREQ, pll_out);
if (ret < 0)
return ret;
ret = snd_soc_dai_set_sysclk(codec_dai, WM8580_CLKSRC_PLLA,
pll_out, SND_SOC_CLOCK_IN);
if (ret < 0)
return ret;
return 0;
}
/*
* SMDK WM8580 DAI operations.
*/
static struct snd_soc_ops smdk_ops = {
.hw_params = smdk_hw_params,
};
/* SMDK Playback widgets */
static const struct snd_soc_dapm_widget smdk_wm8580_dapm_widgets[] = {
SND_SOC_DAPM_HP("Front", NULL),
SND_SOC_DAPM_HP("Center+Sub", NULL),
SND_SOC_DAPM_HP("Rear", NULL),
SND_SOC_DAPM_MIC("MicIn", NULL),
SND_SOC_DAPM_LINE("LineIn", NULL),
};
/* SMDK-PAIFTX connections */
static const struct snd_soc_dapm_route smdk_wm8580_audio_map[] = {
/* MicIn feeds AINL */
{"AINL", NULL, "MicIn"},
/* LineIn feeds AINL/R */
{"AINL", NULL, "LineIn"},
{"AINR", NULL, "LineIn"},
/* Front Left/Right are fed VOUT1L/R */
{"Front", NULL, "VOUT1L"},
{"Front", NULL, "VOUT1R"},
/* Center/Sub are fed VOUT2L/R */
{"Center+Sub", NULL, "VOUT2L"},
{"Center+Sub", NULL, "VOUT2R"},
/* Rear Left/Right are fed VOUT3L/R */
{"Rear", NULL, "VOUT3L"},
{"Rear", NULL, "VOUT3R"},
};
static int smdk_wm8580_init_paiftx(struct snd_soc_pcm_runtime *rtd)
{
/* Enabling the microphone requires the fitting of a 0R
* resistor to connect the line from the microphone jack.
*/
snd_soc_dapm_disable_pin(&rtd->card->dapm, "MicIn");
return 0;
}
enum {
PRI_PLAYBACK = 0,
PRI_CAPTURE,
};
#define SMDK_DAI_FMT (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | \
SND_SOC_DAIFMT_CBM_CFM)
static struct snd_soc_dai_link smdk_dai[] = {
[PRI_PLAYBACK] = { /* Primary Playback i/f */
.name = "WM8580 PAIF RX",
.stream_name = "Playback",
.cpu_dai_name = "samsung-i2s.2",
.codec_dai_name = "wm8580-hifi-playback",
.platform_name = "samsung-i2s.0",
.codec_name = "wm8580.0-001b",
.dai_fmt = SMDK_DAI_FMT,
.ops = &smdk_ops,
},
[PRI_CAPTURE] = { /* Primary Capture i/f */
.name = "WM8580 PAIF TX",
.stream_name = "Capture",
.cpu_dai_name = "samsung-i2s.2",
.codec_dai_name = "wm8580-hifi-capture",
.platform_name = "samsung-i2s.0",
.codec_name = "wm8580.0-001b",
.dai_fmt = SMDK_DAI_FMT,
.init = smdk_wm8580_init_paiftx,
.ops = &smdk_ops,
},
};
static struct snd_soc_card smdk = {
.name = "SMDK-I2S",
.owner = THIS_MODULE,
.dai_link = smdk_dai,
.num_links = ARRAY_SIZE(smdk_dai),
.dapm_widgets = smdk_wm8580_dapm_widgets,
.num_dapm_widgets = ARRAY_SIZE(smdk_wm8580_dapm_widgets),
.dapm_routes = smdk_wm8580_audio_map,
.num_dapm_routes = ARRAY_SIZE(smdk_wm8580_audio_map),
};
static struct platform_device *smdk_snd_device;
static int __init smdk_audio_init(void)
{
int ret;
smdk_snd_device = platform_device_alloc("soc-audio", -1);
if (!smdk_snd_device)
return -ENOMEM;
platform_set_drvdata(smdk_snd_device, &smdk);
ret = platform_device_add(smdk_snd_device);
if (ret)
platform_device_put(smdk_snd_device);
return ret;
}
module_init(smdk_audio_init);
static void __exit smdk_audio_exit(void)
{
platform_device_unregister(smdk_snd_device);
}
module_exit(smdk_audio_exit);
MODULE_AUTHOR("Jaswinder Singh, jassisinghbrar@gmail.com");
MODULE_DESCRIPTION("ALSA SoC SMDK WM8580");
MODULE_LICENSE("GPL");
|
