path: root/drivers/net/wireless/microchip/wilc1000/spi.c

// SPDX-License-Identifier: GPL-2.0
/*
 * Copyright (c) 2012 - 2018 Microchip Technology Inc., and its subsidiaries.
 * All rights reserved.
 */

#include <linux/clk.h>
#include <linux/spi/spi.h>
#include <linux/crc7.h>
#include <linux/crc-itu-t.h>

#include "netdev.h"
#include "cfg80211.h"

static bool enable_crc7;	/* protect SPI commands with CRC7 */
module_param(enable_crc7, bool, 0644);
MODULE_PARM_DESC(enable_crc7,
		 "Enable CRC7 checksum to protect command transfers\n"
		 "\t\t\tagainst corruption during the SPI transfer.\n"
		 "\t\t\tCommand transfers are short and the CPU-cycle cost\n"
		 "\t\t\tof enabling this is small.");

static bool enable_crc16;	/* protect SPI data with CRC16 */
module_param(enable_crc16, bool, 0644);
MODULE_PARM_DESC(enable_crc16,
		 "Enable CRC16 checksum to protect data transfers\n"
		 "\t\t\tagainst corruption during the SPI transfer.\n"
		 "\t\t\tData transfers can be large and the CPU-cycle cost\n"
		 "\t\t\tof enabling this may be substantial.");

/*
 * For CMD_SINGLE_READ and CMD_INTERNAL_READ, WILC may insert one or
 * more zero bytes between the command response and the DATA Start tag
 * (0xf3).  This behavior appears to be undocumented in "ATWILC1000
 * USER GUIDE" (https://tinyurl.com/4hhshdts) but we have observed 1-4
 * zero bytes when the SPI bus operates at 48MHz and none when it
 * operates at 1MHz.
 */
#define WILC_SPI_RSP_HDR_EXTRA_DATA	8

struct wilc_spi {
	bool probing_crc;	/* true if we're probing chip's CRC config */
	bool crc7_enabled;	/* true if crc7 is currently enabled */
	bool crc16_enabled;	/* true if crc16 is currently enabled */
};

static const struct wilc_hif_func wilc_hif_spi;

/********************************************
 *
 *      Spi protocol Function
 *
 ********************************************/

#define CMD_DMA_WRITE				0xc1
#define CMD_DMA_READ				0xc2
#define CMD_INTERNAL_WRITE			0xc3
#define CMD_INTERNAL_READ			0xc4
#define CMD_TERMINATE				0xc5
#define CMD_REPEAT				0xc6
#define CMD_DMA_EXT_WRITE			0xc7
#define CMD_DMA_EXT_READ			0xc8
#define CMD_SINGLE_WRITE			0xc9
#define CMD_SINGLE_READ				0xca
#define CMD_RESET				0xcf

#define SPI_ENABLE_VMM_RETRY_LIMIT		2

/* SPI response fields (section 11.1.2 in ATWILC1000 User Guide): */
#define RSP_START_FIELD				GENMASK(7, 4)
#define RSP_TYPE_FIELD				GENMASK(3, 0)

/* SPI response values for the response fields: */
#define RSP_START_TAG				0xc
#define RSP_TYPE_FIRST_PACKET			0x1
#define RSP_TYPE_INNER_PACKET			0x2
#define RSP_TYPE_LAST_PACKET			0x3
#define RSP_STATE_NO_ERROR			0x00

#define PROTOCOL_REG_PKT_SZ_MASK		GENMASK(6, 4)
#define PROTOCOL_REG_CRC16_MASK			GENMASK(3, 3)
#define PROTOCOL_REG_CRC7_MASK			GENMASK(2, 2)

/*
 * The SPI data packet size may be any integer power of two in the
 * range from 256 to 8192 bytes.
 */
#define DATA_PKT_LOG_SZ_MIN			8	/* 256 B */
#define DATA_PKT_LOG_SZ_MAX			13	/* 8 KiB */

/*
 * Select the data packet size (log2 of number of bytes): Use the
 * maximum data packet size.  We only retransmit complete packets, so
 * there is no benefit from using smaller data packets.
 */
#define DATA_PKT_LOG_SZ				DATA_PKT_LOG_SZ_MAX
#define DATA_PKT_SZ				(1 << DATA_PKT_LOG_SZ)

#define USE_SPI_DMA				0

#define WILC_SPI_COMMAND_STAT_SUCCESS		0
#define WILC_GET_RESP_HDR_START(h)		(((h) >> 4) & 0xf)

struct wilc_spi_cmd {
	u8 cmd_type;
	union {
		struct {
			u8 addr[3];
			u8 crc[];
		} __packed simple_cmd;
		struct {
			u8 addr[3];
			u8 size[2];
			u8 crc[];
		} __packed dma_cmd;
		struct {
			u8 addr[3];
			u8 size[3];
			u8 crc[];
		} __packed dma_cmd_ext;
		struct {
			u8 addr[2];
			__be32 data;
			u8 crc[];
		} __packed internal_w_cmd;
		struct {
			u8 addr[3];
			__be32 data;
			u8 crc[];
		} __packed w_cmd;
	} u;
} __packed;

struct wilc_spi_read_rsp_data {
	u8 header;
	u8 data[4];
	u8 crc[];
} __packed;

struct wilc_spi_rsp_data {
	u8 rsp_cmd_type;
	u8 status;
	u8 data[];
} __packed;

static int wilc_bus_probe(struct spi_device *spi)
{
	int ret;
	struct wilc *wilc;
	struct wilc_spi *spi_priv;

	spi_priv = kzalloc(sizeof(*spi_priv), GFP_KERNEL);
	if (!spi_priv)
		return -ENOMEM;

	ret = wilc_cfg80211_init(&wilc, &spi->dev, WILC_HIF_SPI, &wilc_hif_spi);
	if (ret) {
		kfree(spi_priv);
		return ret;
	}

	spi_set_drvdata(spi, wilc);
	wilc->dev = &spi->dev;
	wilc->bus_data = spi_priv;
	wilc->dev_irq_num = spi->irq;

	wilc->rtc_clk = devm_clk_get(&spi->dev, "rtc");
	if (PTR_ERR_OR_ZERO(wilc->rtc_clk) == -EPROBE_DEFER) {
		kfree(spi_priv);
		return -EPROBE_DEFER;
	} else if (!IS_ERR(wilc->rtc_clk))
		clk_prepare_enable(wilc->rtc_clk);

	return 0;
}

static int wilc_bus_remove(struct spi_device *spi)
{
	struct wilc *wilc = spi_get_drvdata(spi);

	if (!IS_ERR(wilc->rtc_clk))
		clk_disable_unprepare(wilc->rtc_clk);

	wilc_netdev_cleanup(wilc);
	return 0;
}

static const struct of_device_id wilc_of_match[] = {
	{ .compatible = "microchip,wilc1000", },
	{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, wilc_of_match);

static struct spi_driver wilc_spi_driver = {
	.driver = {
		.name = MODALIAS,
		.of_match_table = wilc_of_match,
	},
	.probe =  wilc_bus_probe,
	.remove = wilc_bus_remove,
};
module_spi_driver(wilc_spi_driver);
MODULE_LICENSE("GPL");

static int wilc_spi_tx(struct wilc *wilc, u8 *b, u32 len)
{
	struct spi_device *spi = to_spi_device(wilc->dev);
	int ret;
	struct spi_message msg;

	if (len > 0 && b) {
		struct spi_transfer tr = {
			.tx_buf = b,
			.len = len,
			.delay = {
				.value = 0,
				.unit = SPI_DELAY_UNIT_USECS
			},
		};
		char *r_buffer = kzalloc(len, GFP_KERNEL);

		if (!r_buffer)
			return -ENOMEM;

		tr.rx_buf = r_buffer;
		dev_dbg(&spi->dev, "Request writing %d bytes\n", len);

		memset(&msg, 0, sizeof(msg));
		spi_message_init(&msg);
		msg.spi = spi;
		msg.is_dma_mapped = USE_SPI_DMA;
		spi_message_add_tail(&tr, &msg);

		ret = spi_sync(spi, &msg);
		if (ret < 0)
			dev_err(&spi->dev, "SPI transaction failed\n");

		kfree(r_buffer);
	} else {
		dev_err(&spi->dev,
			"can't write data with the following length: %d\n",
			len);
		ret = -EINVAL;
	}

	return ret;
}

static int wilc_spi_rx(struct wilc *wilc, u8 *rb, u32 rlen)
{
	struct spi_device *spi = to_spi_device(wilc->dev);
	int ret;

	if (rlen > 0) {
		struct spi_message msg;
		struct spi_transfer tr = {
			.rx_buf = rb,
			.len = rlen,
			.delay = {
				.value = 0,
				.unit = SPI_DELAY_UNIT_USECS
			},

		};
		char *t_buffer = kzalloc(rlen, GFP_KERNEL);

		if (!t_buffer)
			return -ENOMEM;

		tr.tx_buf = t_buffer;

		memset(&msg, 0, sizeof(msg));
		spi_message_init(&msg);
		msg.spi = spi;
		msg.is_dma_mapped = USE_SPI_DMA;
		spi_message_add_tail(&tr, &msg);

		ret = spi_sync(spi, &msg);
		if (ret < 0)
			dev_err(&spi->dev, "SPI transaction failed\n");
		kfree(t_buffer);
	} else {
		dev_err(&spi->dev,
			"can't read data with the following length: %u\n",
			rlen);
		ret = -EINVAL;
	}

	return ret;
}

static int wilc_spi_tx_rx(struct wilc *wilc, u8 *wb, u8 *rb, u32 rlen)
{
	struct spi_device *spi = to_spi_device(wilc->dev);
	int ret;

	if (rlen > 0) {
		struct spi_message msg;
		struct spi_transfer tr = {
			.rx_buf = rb,
			.tx_buf = wb,
			.len = rlen,
			.bits_per_word = 8,
			.delay = {
				.value = 0,
				.unit = SPI_DELAY_UNIT_USECS
			},

		};

		memset(&msg, 0, sizeof(msg));
		spi_message_init(&msg);
		msg.spi = spi;
		msg.is_dma_mapped = USE_SPI_DMA;

		spi_message_add_tail(&tr, &msg);
		ret = spi_sync(spi, &msg);
		if (ret < 0)
			dev_err(&spi->dev, "SPI transaction failed\n");
	} else {
		dev_err(&spi->dev,
			"can't read data with the following length: %u\n",
			rlen);
		ret = -EINVAL;
	}

	return ret;
}

static int spi_data_write(struct wilc *wilc, u8 *b, u32 sz)
{
	struct spi_device *spi = to_spi_device(wilc->dev);
	struct wilc_spi *spi_priv = wilc->bus_data;
	int ix, nbytes;
	int result = 0;
	u8 cmd, order, crc[2];
	u16 crc_calc;

	/*
	 * Data
	 */
	ix = 0;
	do {
		if (sz <= DATA_PKT_SZ) {
			nbytes = sz;
			order = 0x3;
		} else {
			nbytes = DATA_PKT_SZ;
			if (ix == 0)
				order = 0x1;
			else
				order = 0x02;
		}

		/*
		 * Write command
		 */
		cmd = 0xf0;
		cmd |= order;

		if (wilc_spi_tx(wilc, &cmd, 1)) {
			dev_err(&spi->dev,
				"Failed data block cmd write, bus error...\n");
			result = -EINVAL;
			break;
		}

		/*
		 * Write data
		 */
		if (wilc_spi_tx(wilc, &b[ix], nbytes)) {
			dev_err(&spi->dev,
				"Failed data block write, bus error...\n");
			result = -EINVAL;
			break;
		}

		/*
		 * Write CRC
		 */
		if (spi_priv->crc16_enabled) {
			crc_calc = crc_itu_t(0xffff, &b[ix], nbytes);
			crc[0] = crc_calc >> 8;
			crc[1] = crc_calc;
			if (wilc_spi_tx(wilc, crc, 2)) {
				dev_err(&spi->dev, "Failed data block crc write, bus error...\n");
				result = -EINVAL;
				break;
			}
		}

		/*
		 * No need to wait for response
		 */
		ix += nbytes;
		sz -= nbytes;
	} while (sz);

	return result;
}

/********************************************
 *
 *      Spi Internal Read/Write Function
 *
 ********************************************/
static u8 wilc_get_crc7(u8 *buffer, u32 len)
{
	return crc7_be(0xfe, buffer, len);
}

static int wilc_spi_single_read(struct wilc *wilc, u8 cmd, u32 adr, void *b,
				u8 clockless)
{
	struct spi_device *spi = to_spi_device(wilc->dev);
	struct wilc_spi *spi_priv = wilc->bus_data;
	u8 wb[32], rb[32];
	int cmd_len, resp_len, i;
	u16 crc_calc, crc_recv;
	struct wilc_spi_cmd *c;
	struct wilc_spi_rsp_data *r;
	struct wilc_spi_read_rsp_data *r_data;

	memset(wb, 0x0, sizeof(wb));
	memset(rb, 0x0, sizeof(rb));
	c = (struct wilc_spi_cmd *)wb;
	c->cmd_type = cmd;
	if (cmd == CMD_SINGLE_READ) {
		c->u.simple_cmd.addr[0] = adr >> 16;
		c->u.simple_cmd.addr[1] = adr >> 8;
		c->u.simple_cmd.addr[2] = adr;
	} else if (cmd == CMD_INTERNAL_READ) {
		c->u.simple_cmd.addr[0] = adr >> 8;
		if (clockless == 1)
			c->u.simple_cmd.addr[0] |= BIT(7);
		c->u.simple_cmd.addr[1] = adr;
		c->u.simple_cmd.addr[2] = 0x0;
	} else {
		dev_err(&spi->dev, "cmd [%x] not supported\n", cmd);
		return -EINVAL;
	}

	cmd_len = offsetof(struct wilc_spi_cmd, u.simple_cmd.crc);
	resp_len = sizeof(*r) + sizeof(*r_data) + WILC_SPI_RSP_HDR_EXTRA_DATA;

	if (spi_priv->crc7_enabled) {
		c->u.simple_cmd.crc[0] = wilc_get_crc7(wb, cmd_len);
		cmd_len += 1;
		resp_len += 2;
	}

	if (cmd_len + resp_len > ARRAY_SIZE(wb)) {
		dev_err(&spi->dev,
			"spi buffer size too small (%d) (%d) (%zu)\n",
			cmd_len, resp_len, ARRAY_SIZE(wb));
		return -EINVAL;
	}

	if (wilc_spi_tx_rx(wilc, wb, rb, cmd_len + resp_len)) {
		dev_err(&spi->dev, "Failed cmd write, bus error...\n");
		return -EINVAL;
	}

	r = (struct wilc_spi_rsp_data *)&rb[cmd_len];
	if (r->rsp_cmd_type != cmd) {
		if (!spi_priv->probing_crc)
			dev_err(&spi->dev,
				"Failed cmd, cmd (%02x), resp (%02x)\n",
				cmd, r->rsp_cmd_type);
		return -EINVAL;
	}

	if (r->status != WILC_SPI_COMMAND_STAT_SUCCESS) {
		dev_err(&spi->dev, "Failed cmd state response state (%02x)\n",
			r->status);
		return -EINVAL;
	}

	for (i = 0; i < WILC_SPI_RSP_HDR_EXTRA_DATA; ++i)
		if (WILC_GET_RESP_HDR_START(r->data[i]) == 0xf)
			break;

	if (i >= WILC_SPI_RSP_HDR_EXTRA_DATA) {
		dev_err(&spi->dev, "Error, data start missing\n");
		return -EINVAL;
	}

	r_data = (struct wilc_spi_read_rsp_data *)&r->data[i];

	if (b)
		memcpy(b, r_data->data, 4);

	if (!clockless && spi_priv->crc16_enabled) {
		crc_recv = (r_data->crc[0] << 8) | r_data->crc[1];
		crc_calc = crc_itu_t(0xffff, r_data->data, 4);
		if (crc_recv != crc_calc) {
			dev_err(&spi->dev, "%s: bad CRC 0x%04x "
				"(calculated 0x%04x)\n", __func__,
				crc_recv, crc_calc);
			return -EINVAL;
		}
	}

	return 0;
}

static int wilc_spi_write_cmd(struct wilc *wilc, u8 cmd, u32 adr, u32 data,
			      u8 clockless)
{
	struct spi_device *spi = to_spi_device(wilc->dev);
	struct wilc_spi *spi_priv = wilc->bus_data;
	u8 wb[32], rb[32];
	int cmd_len, resp_len;
	struct wilc_spi_cmd *c;
	struct wilc_spi_rsp_data *r;

	memset(wb, 0x0, sizeof(wb));
	memset(rb, 0x0, sizeof(rb));
	c = (struct wilc_spi_cmd *)wb;
	c->cmd_type = cmd;
	if (cmd == CMD_INTERNAL_WRITE) {
		c->u.internal_w_cmd.addr[0] = adr >> 8;
		if (clockless == 1)
			c->u.internal_w_cmd.addr[0] |= BIT(7);

		c->u.internal_w_cmd.addr[1] = adr;
		c->u.internal_w_cmd.data = cpu_to_be32(data);
		cmd_len = offsetof(struct wilc_spi_cmd, u.internal_w_cmd.crc);
		if (spi_priv->crc7_enabled)
			c->u.internal_w_cmd.crc[0] = wilc_get_crc7(wb, cmd_len);
	} else if (cmd == CMD_SINGLE_WRITE) {
		c->u.w_cmd.addr[0] = adr >> 16;
		c->u.w_cmd.addr[1] = adr >> 8;
		c->u.w_cmd.addr[2] = adr;
		c->u.w_cmd.data = cpu_to_be32(data);
		cmd_len = offsetof(struct wilc_spi_cmd, u.w_cmd.crc);
		if (spi_priv->crc7_enabled)
			c->u.w_cmd.crc[0] = wilc_get_crc7(wb, cmd_len);
	} else {
		dev_err(&spi->dev, "write cmd [%x] not supported\n", cmd);
		return -EINVAL;
	}

	if (spi_priv->crc7_enabled)
		cmd_len += 1;

	resp_len = sizeof(*r);

	if (cmd_len + resp_len > ARRAY_SIZE(wb)) {
		dev_err(&spi->dev,
			"spi buffer size too small (%d) (%d) (%zu)\n",
			cmd_len, resp_len, ARRAY_SIZE(wb));
		return -EINVAL;
	}

	if (wilc_spi_tx_rx(wilc, wb, rb, cmd_len + resp_len)) {
		dev_err(&spi->dev, "Failed cmd write, bus error...\n");
		return -EINVAL;
	}

	r = (struct wilc_spi_rsp_data *)&rb[cmd_len];
	if (r->rsp_cmd_type != cmd) {
		dev_err(&spi->dev,
			"Failed cmd response, cmd (%02x), resp (%02x)\n",
			cmd, r->rsp_cmd_type);
		return -EINVAL;
	}

	if (r->status != WILC_SPI_COMMAND_STAT_SUCCESS) {
		dev_err(&spi->dev, "Failed cmd state response state (%02x)\n",
			r->status);
		return -EINVAL;
	}

	return 0;
}

static int wilc_spi_dma_rw(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz)
{
	struct spi_device *spi = to_spi_device(wilc->dev);
	struct wilc_spi *spi_priv = wilc->bus_data;
	u16 crc_recv, crc_calc;
	u8 wb[32], rb[32];
	int cmd_len, resp_len;
	int retry, ix = 0;
	u8 crc[2];
	struct wilc_spi_cmd *c;
	struct wilc_spi_rsp_data *r;

	memset(wb, 0x0, sizeof(wb));
	memset(rb, 0x0, sizeof(rb));
	c = (struct wilc_spi_cmd *)wb;
	c->cmd_type = cmd;
	if (cmd == CMD_DMA_WRITE || cmd == CMD_DMA_READ) {
		c->u.dma_cmd.addr[0] = adr >> 16;
		c->u.dma_cmd.addr[1] = adr >> 8;
		c->u.dma_cmd.addr[2] = adr;
		c->u.dma_cmd.size[0] = sz >> 8;
		c->u.dma_cmd.size[1] = sz;
		cmd_len = offsetof(struct wilc_spi_cmd, u.dma_cmd.crc);
		if (spi_priv->crc7_enabled)
			c->u.dma_cmd.crc[0] = wilc_get_crc7(wb, cmd_len);
	} else if (cmd == CMD_DMA_EXT_WRITE || cmd == CMD_DMA_EXT_READ) {
		c->u.dma_cmd_ext.addr[0] = adr >> 16;
		c->u.dma_cmd_ext.addr[1] = adr >> 8;
		c->u.dma_cmd_ext.addr[2] = adr;
		c->u.dma_cmd_ext.size[0] = sz >> 16;
		c->u.dma_cmd_ext.size[1] = sz >> 8;
		c->u.dma_cmd_ext.size[2] = sz;
		cmd_len = offsetof(struct wilc_spi_cmd, u.dma_cmd_ext.crc);
		if (spi_priv->crc7_enabled)
			c->u.dma_cmd_ext.crc[0] = wilc_get_crc7(wb, cmd_len);
	} else {
		dev_err(&spi->dev, "dma read write cmd [%x] not supported\n",
			cmd);
		return -EINVAL;
	}
	if (spi_priv->crc7_enabled)
		cmd_len += 1;

	resp_len = sizeof(*r);

	if (cmd_len + resp_len > ARRAY_SIZE(wb)) {
		dev_err(&spi->dev, "spi buffer size too small (%d)(%d) (%zu)\n",
			cmd_len, resp_len, ARRAY_SIZE(wb));
		return -EINVAL;
	}

	if (wilc_spi_tx_rx(wilc, wb, rb, cmd_len + resp_len)) {
		dev_err(&spi->dev, "Failed cmd write, bus error...\n");
		return -EINVAL;
	}

	r = (struct wilc_spi_rsp_data *)&rb[cmd_len];
	if (r->rsp_cmd_type != cmd) {
		dev_err(&spi->dev,
			"Failed cmd response, cmd (%02x), resp (%02x)\n",
			cmd, r->rsp_cmd_type);
		return -EINVAL;
	}

	if (r->status != WILC_SPI_COMMAND_STAT_SUCCESS) {
		dev_err(&spi->dev, "Failed cmd state response state (%02x)\n",
			r->status);
		return -EINVAL;
	}

	if (cmd == CMD_DMA_WRITE || cmd == CMD_DMA_EXT_WRITE)
		return 0;

	while (sz > 0) {
		int nbytes;
		u8 rsp;

		if (sz <= DATA_PKT_SZ)
			nbytes = sz;
		else
			nbytes = DATA_PKT_SZ;

		/*
		 * Data Response header
		 */
		retry = 100;
		do {
			if (wilc_spi_rx(wilc, &rsp, 1)) {
				dev_err(&spi->dev,
					"Failed resp read, bus err\n");
				return -EINVAL;
			}
			if (WILC_GET_RESP_HDR_START(rsp) == 0xf)
				break;
		} while (retry--);

		/*
		 * Read bytes
		 */
		if (wilc_spi_rx(wilc, &b[ix], nbytes)) {
			dev_err(&spi->dev,
				"Failed block read, bus err\n");
			return -EINVAL;
		}

		/*
		 * Read CRC
		 */
		if (spi_priv->crc16_enabled) {
			if (wilc_spi_rx(wilc, crc, 2)) {
				dev_err(&spi->dev,
					"Failed block CRC read, bus err\n");
				return -EINVAL;
			}
			crc_recv = (crc[0] << 8) | crc[1];
			crc_calc = crc_itu_t(0xffff, &b[ix], nbytes);
			if (crc_recv != crc_calc) {
				dev_err(&spi->dev, "%s: bad CRC 0x%04x "
					"(calculated 0x%04x)\n", __func__,
					crc_recv, crc_calc);
				return -EINVAL;
			}
		}

		ix += nbytes;
		sz -= nbytes;
	}
	return 0;
}

static int wilc_spi_read_reg(struct wilc *wilc, u32 addr, u32 *data)
{
	struct spi_device *spi = to_spi_device(wilc->dev);
	int result;
	u8 cmd = CMD_SINGLE_READ;
	u8 clockless = 0;

	if (addr < WILC_SPI_CLOCKLESS_ADDR_LIMIT) {
		/* Clockless register */
		cmd = CMD_INTERNAL_READ;
		clockless = 1;
	}

	result = wilc_spi_single_read(wilc, cmd, addr, data, clockless);
	if (result) {
		dev_err(&spi->dev, "Failed cmd, read reg (%08x)...\n", addr);
		return result;
	}

	le32_to_cpus(data);

	return 0;
}

static int wilc_spi_read(struct wilc *wilc, u32 addr, u8 *buf, u32 size)
{
	struct spi_device *spi = to_spi_device(wilc->dev);
	int result;

	if (size <= 4)
		return -EINVAL;

	result = wilc_spi_dma_rw(wilc, CMD_DMA_EXT_READ, addr, buf, size);
	if (result) {
		dev_err(&spi->dev, "Failed cmd, read block (%08x)...\n", addr);
		return result;
	}

	return 0;
}

static int spi_internal_write(struct wilc *wilc, u32 adr, u32 dat)
{
	struct spi_device *spi = to_spi_device(wilc->dev);
	int result;

	result = wilc_spi_write_cmd(wilc, CMD_INTERNAL_WRITE, adr, dat, 0);
	if (result) {
		dev_err(&spi->dev, "Failed internal write cmd...\n");
		return result;
	}

	return 0;
}

static int spi_internal_read(struct wilc *wilc, u32 adr, u32 *data)
{
	struct spi_device *spi = to_spi_device(wilc->dev);
	struct wilc_spi *spi_priv = wilc->bus_data;
	int result;

	result = wilc_spi_single_read(wilc, CMD_INTERNAL_READ, adr, data, 0);
	if (result) {
		if (!spi_priv->probing_crc)
			dev_err(&spi->dev, "Failed internal read cmd...\n");
		return result;
	}

	le32_to_cpus(data);

	return 0;
}

/********************************************
 *
 *      Spi interfaces
 *
 ********************************************/

static int wilc_spi_write_reg(struct wilc *wilc, u32 addr, u32 data)
{
	struct spi_device *spi = to_spi_device(wilc->dev);
	int result;
	u8 cmd = CMD_SINGLE_WRITE;
	u8 clockless = 0;

	if (addr < WILC_SPI_CLOCKLESS_ADDR_LIMIT) {
		/* Clockless register */
		cmd = CMD_INTERNAL_WRITE;
		clockless = 1;
	}

	result = wilc_spi_write_cmd(wilc, cmd, addr, data, clockless);
	if (result) {
		dev_err(&spi->dev, "Failed cmd, write reg (%08x)...\n", addr);
		return result;
	}

	return 0;
}

static int spi_data_rsp(struct wilc *wilc, u8 cmd)
{
	struct spi_device *spi = to_spi_device(wilc->dev);
	int result, i;
	u8 rsp[4];

	/*
	 * The response to data packets is two bytes long.  For
	 * efficiency's sake, wilc_spi_write() wisely ignores the
	 * responses for all packets but the final one.  The downside
	 * of that optimization is that when the final data packet is
	 * short, we may receive (part of) the response to the
	 * second-to-last packet before the one for the final packet.
	 * To handle this, we always read 4 bytes and then search for
	 * the last byte that contains the "Response Start" code (0xc
	 * in the top 4 bits).  We then know that this byte is the
	 * first response byte of the final data packet.
	 */
	result = wilc_spi_rx(wilc, rsp, sizeof(rsp));
	if (result) {
		dev_err(&spi->dev, "Failed bus error...\n");
		return result;
	}

	for (i = sizeof(rsp) - 2; i >= 0; --i)
		if (FIELD_GET(RSP_START_FIELD, rsp[i]) == RSP_START_TAG)
			break;

	if (i < 0) {
		dev_err(&spi->dev,
			"Data packet response missing (%02x %02x %02x %02x)\n",
			rsp[0], rsp[1], rsp[2], rsp[3]);
		return -1;
	}

	/* rsp[i] is the last response start byte */

	if (FIELD_GET(RSP_TYPE_FIELD, rsp[i]) != RSP_TYPE_LAST_PACKET
	    || rsp[i + 1] != RSP_STATE_NO_ERROR) {
		dev_err(&spi->dev, "Data response error (%02x %02x)\n",
			rsp[i], rsp[i + 1]);
		return -1;
	}
	return 0;
}

static int wilc_spi_write(struct wilc *wilc, u32 addr, u8 *buf, u32 size)
{
	struct spi_device *spi = to_spi_device(wilc->dev);
	int result;

	/*
	 * has to be greated than 4
	 */
	if (size <= 4)
		return -EINVAL;

	result = wilc_spi_dma_rw(wilc, CMD_DMA_EXT_WRITE, addr, NULL, size);
	if (result) {
		dev_err(&spi->dev,
			"Failed cmd, write block (%08x)...\n", addr);
		return result;
	}

	/*
	 * Data
	 */
	result = spi_data_write(wilc, buf, size);
	if (result) {
		dev_err(&spi->dev, "Failed block data write...\n");
		return result;
	}

	/*
	 * Data response
	 */
	return spi_data_rsp(wilc, CMD_DMA_EXT_WRITE);
}

/********************************************
 *
 *      Bus interfaces
 *
 ********************************************/

static int wilc_spi_deinit(struct wilc *wilc)
{
	/*
	 * TODO:
	 */
	return 0;
}

static int wilc_spi_init(struct wilc *wilc, bool resume)
{
	struct spi_device *spi = to_spi_device(wilc->dev);
	struct wilc_spi *spi_priv = wilc->bus_data;
	u32 reg;
	u32 chipid;
	static int isinit;
	int ret, i;

	if (isinit) {
		ret = wilc_spi_read_reg(wilc, WILC_CHIPID, &chipid);
		if (ret)
			dev_err(&spi->dev, "Fail cmd read chip id...\n");

		return ret;
	}

	/*
	 * configure protocol
	 */

	/*
	 * Infer the CRC settings that are currently in effect.  This
	 * is necessary because we can't be sure that the chip has
	 * been RESET (e.g, after module unload and reload).
	 */
	spi_priv->probing_crc = true;
	spi_priv->crc7_enabled = enable_crc7;
	spi_priv->crc16_enabled = false; /* don't check CRC16 during probing */
	for (i = 0; i < 2; ++i) {
		ret = spi_internal_read(wilc, WILC_SPI_PROTOCOL_OFFSET, &reg);
		if (ret == 0)
			break;
		spi_priv->crc7_enabled = !enable_crc7;
	}
	if (ret) {
		dev_err(&spi->dev, "Failed with CRC7 on and off.\n");
		return ret;
	}

	/* set up the desired CRC configuration: */
	reg &= ~(PROTOCOL_REG_CRC7_MASK | PROTOCOL_REG_CRC16_MASK);
	if (enable_crc7)
		reg |= PROTOCOL_REG_CRC7_MASK;
	if (enable_crc16)
		reg |= PROTOCOL_REG_CRC16_MASK;

	/* set up the data packet size: */
	BUILD_BUG_ON(DATA_PKT_LOG_SZ < DATA_PKT_LOG_SZ_MIN
		     || DATA_PKT_LOG_SZ > DATA_PKT_LOG_SZ_MAX);
	reg &= ~PROTOCOL_REG_PKT_SZ_MASK;
	reg |= FIELD_PREP(PROTOCOL_REG_PKT_SZ_MASK,
			  DATA_PKT_LOG_SZ - DATA_PKT_LOG_SZ_MIN);

	/* establish the new setup: */
	ret = spi_internal_write(wilc, WILC_SPI_PROTOCOL_OFFSET, reg);
	if (ret) {
		dev_err(&spi->dev,
			"[wilc spi %d]: Failed internal write reg\n",
			__LINE__);
		return ret;
	}
	/* update our state to match new protocol settings: */
	spi_priv->crc7_enabled = enable_crc7;
	spi_priv->crc16_enabled = enable_crc16;

	/* re-read to make sure new settings are in effect: */
	spi_internal_read(wilc, WILC_SPI_PROTOCOL_OFFSET, &reg);

	spi_priv->probing_crc = false;

	/*
	 * make sure can read back chip id correctly
	 */
	ret = wilc_spi_read_reg(wilc, WILC_CHIPID, &chipid);
	if (ret) {
		dev_err(&spi->dev, "Fail cmd read chip id...\n");
		return ret;
	}

	isinit = 1;

	return 0;
}

static int wilc_spi_read_size(struct wilc *wilc, u32 *size)
{
	int ret;

	ret = spi_internal_read(wilc,
				WILC_SPI_INT_STATUS - WILC_SPI_REG_BASE, size);
	*size = FIELD_GET(IRQ_DMA_WD_CNT_MASK, *size);

	return ret;
}

static int wilc_spi_read_int(struct wilc *wilc, u32 *int_status)
{
	return spi_internal_read(wilc, WILC_SPI_INT_STATUS - WILC_SPI_REG_BASE,
				 int_status);
}

static int wilc_spi_clear_int_ext(struct wilc *wilc, u32 val)
{
	int ret;
	int retry = SPI_ENABLE_VMM_RETRY_LIMIT;
	u32 check;

	while (retry) {
		ret = spi_internal_write(wilc,
					 WILC_SPI_INT_CLEAR - WILC_SPI_REG_BASE,
					 val);
		if (ret)
			break;

		ret = spi_internal_read(wilc,
					WILC_SPI_INT_CLEAR - WILC_SPI_REG_BASE,
					&check);
		if (ret || ((check & EN_VMM) == (val & EN_VMM)))
			break;

		retry--;
	}
	return ret;
}

static int wilc_spi_sync_ext(struct wilc *wilc, int nint)
{
	struct spi_device *spi = to_spi_device(wilc->dev);
	u32 reg;
	int ret, i;

	if (nint > MAX_NUM_INT) {
		dev_err(&spi->dev, "Too many interrupts (%d)...\n", nint);
		return -EINVAL;
	}

	/*
	 * interrupt pin mux select
	 */
	ret = wilc_spi_read_reg(wilc, WILC_PIN_MUX_0, &reg);
	if (ret) {
		dev_err(&spi->dev, "Failed read reg (%08x)...\n",
			WILC_PIN_MUX_0);
		return ret;
	}
	reg |= BIT(8);
	ret = wilc_spi_write_reg(wilc, WILC_PIN_MUX_0, reg);
	if (ret) {
		dev_err(&spi->dev, "Failed write reg (%08x)...\n",
			WILC_PIN_MUX_0);
		return ret;
	}

	/*
	 * interrupt enable
	 */
	ret = wilc_spi_read_reg(wilc, WILC_INTR_ENABLE, &reg);
	if (ret) {
		dev_err(&spi->dev, "Failed read reg (%08x)...\n",
			WILC_INTR_ENABLE);
		return ret;
	}

	for (i = 0; (i < 5) && (nint > 0); i++, nint--)
		reg |= (BIT((27 + i)));

	ret = wilc_spi_write_reg(wilc, WILC_INTR_ENABLE, reg);
	if (ret) {
		dev_err(&spi->dev, "Failed write reg (%08x)...\n",
			WILC_INTR_ENABLE);
		return ret;
	}
	if (nint) {
		ret = wilc_spi_read_reg(wilc, WILC_INTR2_ENABLE, &reg);
		if (ret) {
			dev_err(&spi->dev, "Failed read reg (%08x)...\n",
				WILC_INTR2_ENABLE);
			return ret;
		}

		for (i = 0; (i < 3) && (nint > 0); i++, nint--)
			reg |= BIT(i);

		ret = wilc_spi_read_reg(wilc, WILC_INTR2_ENABLE, &reg);
		if (ret) {
			dev_err(&spi->dev, "Failed write reg (%08x)...\n",
				WILC_INTR2_ENABLE);
			return ret;
		}
	}

	return 0;
}

/* Global spi HIF function table */
static const struct wilc_hif_func wilc_hif_spi = {
	.hif_init = wilc_spi_init,
	.hif_deinit = wilc_spi_deinit,
	.hif_read_reg = wilc_spi_read_reg,
	.hif_write_reg = wilc_spi_write_reg,
	.hif_block_rx = wilc_spi_read,
	.hif_block_tx = wilc_spi_write,
	.hif_read_int = wilc_spi_read_int,
	.hif_clear_int_ext = wilc_spi_clear_int_ext,
	.hif_read_size = wilc_spi_read_size,
	.hif_block_tx_ext = wilc_spi_write,
	.hif_block_rx_ext = wilc_spi_read,
	.hif_sync_ext = wilc_spi_sync_ext,
};