1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
|
// SPDX-License-Identifier: GPL-2.0
/*
* BME680 - SPI Driver
*
* Copyright (C) 2018 Himanshu Jha <himanshujha199640@gmail.com>
*/
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/regmap.h>
#include <linux/spi/spi.h>
#include "bme680.h"
struct bme680_spi_bus_context {
struct spi_device *spi;
u8 current_page;
};
/*
* In SPI mode there are only 7 address bits, a "page" register determines
* which part of the 8-bit range is active. This function looks at the address
* and writes the page selection bit if needed
*/
static int bme680_regmap_spi_select_page(
struct bme680_spi_bus_context *ctx, u8 reg)
{
struct spi_device *spi = ctx->spi;
int ret;
u8 buf[2];
u8 page = (reg & 0x80) ? 0 : 1; /* Page "1" is low range */
if (page == ctx->current_page)
return 0;
/*
* Data sheet claims we're only allowed to change bit 4, so we must do
* a read-modify-write on each and every page select
*/
buf[0] = BME680_REG_STATUS;
ret = spi_write_then_read(spi, buf, 1, buf + 1, 1);
if (ret < 0) {
dev_err(&spi->dev, "failed to set page %u\n", page);
return ret;
}
buf[0] = BME680_REG_STATUS;
if (page)
buf[1] |= BME680_SPI_MEM_PAGE_BIT;
else
buf[1] &= ~BME680_SPI_MEM_PAGE_BIT;
ret = spi_write(spi, buf, 2);
if (ret < 0) {
dev_err(&spi->dev, "failed to set page %u\n", page);
return ret;
}
ctx->current_page = page;
return 0;
}
static int bme680_regmap_spi_write(void *context, const void *data,
size_t count)
{
struct bme680_spi_bus_context *ctx = context;
struct spi_device *spi = ctx->spi;
int ret;
u8 buf[2];
memcpy(buf, data, 2);
ret = bme680_regmap_spi_select_page(ctx, buf[0]);
if (ret)
return ret;
/*
* The SPI register address (= full register address without bit 7)
* and the write command (bit7 = RW = '0')
*/
buf[0] &= ~0x80;
return spi_write(spi, buf, 2);
}
static int bme680_regmap_spi_read(void *context, const void *reg,
size_t reg_size, void *val, size_t val_size)
{
struct bme680_spi_bus_context *ctx = context;
struct spi_device *spi = ctx->spi;
int ret;
u8 addr = *(const u8 *)reg;
ret = bme680_regmap_spi_select_page(ctx, addr);
if (ret)
return ret;
addr |= 0x80; /* bit7 = RW = '1' */
return spi_write_then_read(spi, &addr, 1, val, val_size);
}
static struct regmap_bus bme680_regmap_bus = {
.write = bme680_regmap_spi_write,
.read = bme680_regmap_spi_read,
.reg_format_endian_default = REGMAP_ENDIAN_BIG,
.val_format_endian_default = REGMAP_ENDIAN_BIG,
};
static int bme680_spi_probe(struct spi_device *spi)
{
const struct spi_device_id *id = spi_get_device_id(spi);
struct bme680_spi_bus_context *bus_context;
struct regmap *regmap;
int ret;
spi->bits_per_word = 8;
ret = spi_setup(spi);
if (ret < 0) {
dev_err(&spi->dev, "spi_setup failed!\n");
return ret;
}
bus_context = devm_kzalloc(&spi->dev, sizeof(*bus_context), GFP_KERNEL);
if (!bus_context)
return -ENOMEM;
bus_context->spi = spi;
bus_context->current_page = 0xff; /* Undefined on warm boot */
regmap = devm_regmap_init(&spi->dev, &bme680_regmap_bus,
bus_context, &bme680_regmap_config);
if (IS_ERR(regmap)) {
dev_err(&spi->dev, "Failed to register spi regmap %ld\n", PTR_ERR(regmap));
return PTR_ERR(regmap);
}
return bme680_core_probe(&spi->dev, regmap, id->name);
}
static const struct spi_device_id bme680_spi_id[] = {
{"bme680", 0},
{},
};
MODULE_DEVICE_TABLE(spi, bme680_spi_id);
static const struct of_device_id bme680_of_spi_match[] = {
{ .compatible = "bosch,bme680", },
{},
};
MODULE_DEVICE_TABLE(of, bme680_of_spi_match);
static struct spi_driver bme680_spi_driver = {
.driver = {
.name = "bme680_spi",
.of_match_table = bme680_of_spi_match,
},
.probe = bme680_spi_probe,
.id_table = bme680_spi_id,
};
module_spi_driver(bme680_spi_driver);
MODULE_AUTHOR("Himanshu Jha <himanshujha199640@gmail.com>");
MODULE_DESCRIPTION("Bosch BME680 SPI driver");
MODULE_LICENSE("GPL v2");
MODULE_IMPORT_NS(IIO_BME680);
|
