1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/regulator/ti,tps62360.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Texas Instruments TPS6236x Voltage Regulators
maintainers:
- Laxman Dewangan <ldewangan@nvidia.com>
description: |
The TPS6236x are a family of step down dc-dc converter with
an input voltage range of 2.5V to 5.5V. The devices provide
up to 3A peak load current, and an output voltage range of
0.77V to 1.4V (TPS62360/62) and 0.5V to 1.77V (TPS62361B/63).
Datasheet is available at:
https://www.ti.com/lit/gpn/tps62360
allOf:
- $ref: regulator.yaml#
properties:
compatible:
enum:
- ti,tps62360
- ti,tps62361
- ti,tps62362
- ti,tps62363
reg:
maxItems: 1
ti,vsel0-gpio:
description: |
GPIO for controlling VSEL0 line. If this property
is missing, then assume that there is no GPIO for
VSEL0 control.
maxItems: 1
ti,vsel1-gpio:
description: |
GPIO for controlling VSEL1 line. If this property
is missing, then assume that there is no GPIO for
VSEL1 control.
maxItems: 1
ti,enable-vout-discharge:
description: Enable output discharge.
type: boolean
ti,enable-pull-down:
description: Enable pull down.
type: boolean
ti,vsel0-state-high:
description: |
Initial state of VSEL0 input is high. If this property
is missing, then assume the state as low.
type: boolean
ti,vsel1-state-high:
description: |
Initial state of VSEL1 input is high. If this property
is missing, then assume the state as low.
type: boolean
required:
- compatible
- reg
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
regulator@60 {
compatible = "ti,tps62361";
reg = <0x60>;
regulator-name = "tps62361-vout";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
ti,vsel0-gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>;
ti,vsel1-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
ti,vsel0-state-high;
ti,vsel1-state-high;
ti,enable-pull-down;
ti,enable-vout-discharge;
};
};
...
|
