1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/cortina,gemini-ethernet.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Cortina Systems Gemini Ethernet Controller
maintainers:
- Linus Walleij <linus.walleij@linaro.org>
description: |
This ethernet controller is found in the Gemini SoC family:
StorLink SL3512 and SL3516, also known as Cortina Systems
CS3512 and CS3516.
properties:
compatible:
const: cortina,gemini-ethernet
reg:
minItems: 3
description: must contain the global registers and the V-bit and A-bit
memory areas, in total three register sets.
"#address-cells":
const: 1
"#size-cells":
const: 1
ranges: true
#The subnodes represents the two ethernet ports in this device.
#They are not independent of each other since they share resources
#in the parent node, and are thus children.
patternProperties:
"^ethernet-port@[0-9]+$":
type: object
unevaluatedProperties: false
description: contains the resources for ethernet port
allOf:
- $ref: ethernet-controller.yaml#
properties:
compatible:
const: cortina,gemini-ethernet-port
reg:
items:
- description: DMA/TOE memory
- description: GMAC memory area of the port
interrupts:
maxItems: 1
description: should contain the interrupt line of the port.
this is nominally a level interrupt active high.
resets:
maxItems: 1
description: this must provide an SoC-integrated reset line for the port.
clocks:
maxItems: 1
description: this should contain a handle to the PCLK clock for
clocking the silicon in this port
clock-names:
const: PCLK
required:
- reg
- compatible
- interrupts
- resets
- clocks
- clock-names
required:
- compatible
- reg
- ranges
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/cortina,gemini-clock.h>
#include <dt-bindings/reset/cortina,gemini-reset.h>
mdio0: mdio {
#address-cells = <1>;
#size-cells = <0>;
phy0: ethernet-phy@1 {
reg = <1>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@3 {
reg = <3>;
device_type = "ethernet-phy";
};
};
ethernet@60000000 {
compatible = "cortina,gemini-ethernet";
reg = <0x60000000 0x4000>, /* Global registers, queue */
<0x60004000 0x2000>, /* V-bit */
<0x60006000 0x2000>; /* A-bit */
#address-cells = <1>;
#size-cells = <1>;
ranges;
gmac0: ethernet-port@0 {
compatible = "cortina,gemini-ethernet-port";
reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */
<0x6000a000 0x2000>; /* Port 0 GMAC */
interrupt-parent = <&intcon>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
resets = <&syscon GEMINI_RESET_GMAC0>;
clocks = <&syscon GEMINI_CLK_GATE_GMAC0>;
clock-names = "PCLK";
phy-mode = "rgmii";
phy-handle = <&phy0>;
};
gmac1: ethernet-port@1 {
compatible = "cortina,gemini-ethernet-port";
reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */
<0x6000e000 0x2000>; /* Port 1 GMAC */
interrupt-parent = <&intcon>;
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
resets = <&syscon GEMINI_RESET_GMAC1>;
clocks = <&syscon GEMINI_CLK_GATE_GMAC1>;
clock-names = "PCLK";
phy-mode = "rgmii";
phy-handle = <&phy1>;
};
};
|
