summaryrefslogtreecommitdiff
path: root/sound/pci/hda/patch_cs8409.h
AgeCommit message (Collapse)AuthorFilesLines
2023-09-04ALSA: hda/cirrus: Fix broken audio on hardware with two CS42L42 codecs.Vitaly Rodionov1-0/+1
Recently in v6.3-rc1 there was a change affecting behaviour of hrtimers (commit 0c52310f260014d95c1310364379772cb74cf82d) and causing few issues on platforms with two CS42L42 codecs. Canonical/Dell has reported an issue with Vostro-3910. We need to increase this value by 15ms. Link: https://bugs.launchpad.net/somerville/+bug/2031060 Fixes: 9fb9fa18fb50 ("ALSA: hda/cirrus: Add extra 10 ms delay to allow PLL settle and lock.") Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230904160033.908135-1-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-07-05ALSA: hda/cs8409: change cs8409_fixups v.pins initializers to staticTom Rix1-2/+0
sparse reports sound/pci/hda/patch_cs8409-tables.c:79:25: warning: symbol 'cs8409_cs42l42_pincfgs_no_dmic' was not declared. Should it be static? cs8409_cs42l42_pincfgs_no_dmic is only used by cs8409_fixups table as an initializer for the hda_fixup element v.pins. Both are defined in the patch_cs8408-table.c file but only cs8409_fixups is used externally in patch_cs8409.c. So cs8409_cs42l42_pincfgs_no_dmic should have a static storage class specifier. The other v.pins initializers in cs8409_fixups table, though declared extern in patch_cs8409.h are also only used in patch_cs8409-tables.c. So change all the v.pins initializers to static. Fixes: 9e7647b5070f ("ALSA: hda/cs8409: Move arrays of configuration to a new file") Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20220704142836.636204-1-trix@redhat.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-05-12ALSA: hda/cs8409: Add Speaker Playback Switch for WarlockStefan Binding1-0/+1
Add support for a Speaker Playback Switch, which disables the Amp connected to cs8409. The Switch is not added automatically because cs8409 does not have an output amp for the speaker NID. Note: This switch uses a different GPIO to Cyborg/Odin variants Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220511100207.1268321-4-sbinding@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-05-12ALSA: hda/cs8409: Add Speaker Playback Switch for CyborgStefan Binding1-0/+3
Add support for a Speaker Playback Switch, which disables the Amp connected to cs8409. The Switch is not added automatically because cs8409 does not have an output amp for the speaker NID. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220511100207.1268321-3-sbinding@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-05-12ALSA: hda/cs8409: Support new Odin VariantsStefan Binding1-0/+1
Odin Variants have the internal mic connected directly to the CPU rather than codec. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220511100207.1268321-2-sbinding@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-05-09ALSA: hda/cs8409: Support manual mode detection for CS42L42Stefan Binding1-1/+0
For Jack detection on CS42L42, detection is normally done using "auto" mode, which automatically detects what type of jack is connected to the device. However, some headsets are not automatically detected, and as such and alternative detection method "manual mode" can be used to detect these headsets. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Tested-by: Chris Chiu <chris.chiu@canonical.com> Link: https://lore.kernel.org/r/20220504161236.2490532-4-sbinding@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-05-09ALSA: hda/cs8409: Use general cs42l42 include in cs8409 hda driverStefan Binding1-7/+1
This is to improve maintainability of the driver. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220504161236.2490532-3-sbinding@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-03-28ALSA: hda/cs8409: Support new Warlock MLK VariantsStefan Binding1-0/+2
Added 15 new laptops, with 2 variants: Warlock MLK and Warlock MLK with Dual Mic The only difference between the variants, is the the dual Mic variants use a stereo DMIC. These variants do no use reduce volume (Full Scale Volume) Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220328115614.15761-5-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-03-28ALSA: hda/cs8409: Fix Full Scale Volume setting for all variantsStefan Binding1-0/+3
All current variants (Bullseye/Warlock/Cyborg) should be using reduced volume (-6dB) for better speaker protection. Refactor to make more explicit the meaning and setting of Full Scale Volume setting to avoid future confusion. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220328115614.15761-4-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-01-04ALSA: hda/cs8409: Fix Jack detection after resumeChristian A. Ehrhardt1-0/+1
The suspend code unconditionally sets ->hp_jack_in and ->mic_jack_in to zero but without reporting this status change to the HDA core. To compensate for this, always assume a status change on the first unsol event after boot or resume. Fixes: 424e531b47f8 ("ALSA: hda/cs8409: Ensure Type Detection is only run on startup when necessary") Signed-off-by: Christian A. Ehrhardt <lk@c--e.de> Link: https://lore.kernel.org/r/20211231134432.atwmuzeceqiklcoa@cae.in-ulm.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-27ALSA: hda/cs8409: Ensure Type Detection is only run on startup when necessaryStefan Binding1-0/+2
Type Detection should only be run after init and when the controls have been built. There is no need to run it multiple times. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210827110252.5361-1-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Unmute/Mute codec when stream starts/stopsStefan Binding1-0/+7
Codec is muted on init, and then unmuted when the stream starts. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-28-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Follow correct CS42L42 power down sequence for suspendStefan Binding1-0/+2
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-27-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Use timeout rather than retries for I2C transaction waitsStefan Binding1-0/+2
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-25-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Set fixed sample rate of 48kHz for CS42L42Stefan Binding1-0/+2
CS42L42 is configured to use a fixed sample rate of 48kHz. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-24-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Add support for dolphinLucas Tanure1-0/+24
Dolphin devices have CS8409 HDA Bridge connected to two CS42L42 codecs. Codec 1 supports Headphone and Headset Mic. Codec 2 supports Line Out. Features: - Front and Read Jacks appear as separate jacks; Removal or connection of on jack should not affect the connection of the other. - Front Jack only shows up on jack detection. - Rear Jack is Phantom Jack. - Separate Volume Controls for each Jack Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-22-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Add Support to disable jack type detection for CS42L42Stefan Binding1-0/+1
Some hardware configurations do not support jack type detection. Instead, for those configurations, only tip detection is supported. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-21-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Move codec properties to its own structLucas Tanure1-11/+28
To accommodate move, cs42l42_resume has been added to mirror the existing function cs42l42_suspend. Function cs42l42_reset is no longer required, since cs42l42_resume and cs42l42_suspend perform the same operations. Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-19-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Separate CS8409, CS42L42 and project functionsLucas Tanure1-12/+12
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-18-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Support i2c bulk read/write functionsLucas Tanure1-3/+5
This allows mutex locks to be moved into i2c functions, as the bulk read/write functions can lock/unlock themselves to prevent interruption of sequence reads/writes. Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-17-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Avoid re-setting the same page as the last accessLucas Tanure1-0/+2
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-16-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Avoid setting the same I2C address for every accessLucas Tanure1-0/+1
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-15-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Dont disable I2C clock between consecutive accessesLucas Tanure1-0/+4
Only disable I2C clock 25 ms after not being used. The current implementation enables and disables the I2C clock for each I2C transaction. Each enable/disable call requires two verb transactions. This means each I2C transaction requires a total of four verb transactions to enable and disable the clock. However, if there are multiple consecutive I2C transactions, it is not necessary to enable and disable the clock each time, instead it is more efficient to enable the clock for the first transaction, and disable it after the final transaction, which would improve performance. This is achieved by using a timeout which disables the clock if no request to enable the clock has occurred for 25 ms. Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-14-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Generalize volume controlsLucas Tanure1-8/+19
Use amp offsets as indexes for saved volumes. Remove dependencies on NID inside volume control functions. Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-13-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Prevent I2C access during suspend timeLucas Tanure1-0/+1
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-12-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Use enums for register names and coefficientsStefan Binding1-28/+211
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-4-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cs8409: Move arrays of configuration to a new fileLucas Tanure1-0/+19
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-3-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12ALSA: hda/cirrus: Move CS8409 HDA bridge to separate moduleLucas Tanure1-0/+91
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210811185654.6837-2-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-26 08:54:04 +0000