| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
If the dev is known (e.g. a devm-based sys_off_handler is used), it can
be passed to the handler's callback to have it available there.
Otherwise, cb_data might be set to the dev in most of the cases.
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Link: https://lore.kernel.org/r/20230327-tegra-pmic-reboot-v7-3-18699d5dcd76@skidata.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
As the emergency restart does not call kernel_restart_prepare(), the
system_state stays in SYSTEM_RUNNING.
Since bae1d3a05a8b, this hinders i2c_in_atomic_xfer_mode() from becoming
active, and therefore might lead to avoidable warnings in the restart
handlers, e.g.:
[ 12.667612] WARNING: CPU: 1 PID: 1 at kernel/rcu/tree_plugin.h:318 rcu_note_context_switch+0x33c/0x6b0
[ 12.676926] Voluntary context switch within RCU read-side critical section!
...
[ 12.742376] schedule_timeout from wait_for_completion_timeout+0x90/0x114
[ 12.749179] wait_for_completion_timeout from tegra_i2c_wait_completion+0x40/0x70
...
[ 12.994527] atomic_notifier_call_chain from machine_restart+0x34/0x58
[ 13.001050] machine_restart from panic+0x2a8/0x32c
Avoid these by setting the correct system_state.
Fixes: bae1d3a05a8b ("i2c: core: remove use of in_atomic()")
Cc: stable@vger.kernel.org # v5.2+
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Link: https://lore.kernel.org/r/20230327-tegra-pmic-reboot-v7-1-18699d5dcd76@skidata.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add SYS_OFF_MODE_RESTART_PREPARE callbacks to be invoked before
a system restart.
Suggested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
|
|
This reverts commit 2bb2b7b57f81255c13f4395ea911d6bdc70c9fe2.
The testing of 5.19 release candidates revealed missing synchronization
between early and regular console functionality.
It would be possible to start the console kthreads later as a workaround.
But it is clear that console lock serialized console drivers between
each other. It opens a big area of possible problems that were not
considered by people involved in the development and review.
printk() is crucial for debugging kernel issues and console output is
very important part of it. The number of consoles is huge and a proper
review would take some time. As a result it need to be reverted for 5.19.
Link: https://lore.kernel.org/r/YrBdjVwBOVgLfHyb@alley
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220623145157.21938-7-pmladek@suse.com
|
|
This reverts commit b87f02307d3cfbda768520f0687c51ca77e14fc3.
The testing of 5.19 release candidates revealed missing synchronization
between early and regular console functionality.
It would be possible to start the console kthreads later as a workaround.
But it is clear that console lock serialized console drivers between
each other. It opens a big area of possible problems that were not
considered by people involved in the development and review.
printk() is crucial for debugging kernel issues and console output is
very important part of it. The number of consoles is huge and a proper
review would take some time. As a result it need to be reverted for 5.19.
Link: https://lore.kernel.org/r/YrBdjVwBOVgLfHyb@alley
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220623145157.21938-2-pmladek@suse.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk fixes from Petr Mladek:
"Make the global console_sem available for CPU that is handling panic()
or shutdown.
This is an old problem when an existing console lock owner might block
console output, but it became more visible with the kthreads"
* tag 'printk-for-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: Wait for the global console lock when the system is going down
printk: Block console kthreads when direct printing will be required
|
|
|
|
There are reports that the console kthreads block the global console
lock when the system is going down, for example, reboot, panic.
First part of the solution was to block kthreads in these problematic
system states so they stopped handling newly added messages.
Second part of the solution is to wait when for the kthreads when
they are actively printing. It solves the problem when a message
was printed before the system entered the problematic state and
the kthreads managed to step in.
A busy waiting has to be used because panic() can be called in any
context and in an unknown state of the scheduler.
There must be a timeout because the kthread might get stuck or sleeping
and never release the lock. The timeout 10s is an arbitrary value
inspired by the softlockup timeout.
Link: https://lore.kernel.org/r/20220610205038.GA3050413@paulmck-ThinkPad-P17-Gen-1
Link: https://lore.kernel.org/r/CAMdYzYpF4FNTBPZsEFeWRuEwSies36QM_As8osPWZSr2q-viEA@mail.gmail.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20220615162805.27962-3-pmladek@suse.com
|
|
There are other methods of powering off machine than the reboot syscall.
Previously we missed to cover those methods and it created power-off
regression for some machines, like the PowerPC e500.
Fix this problem by moving the legacy sys-off handler registration to
the latest phase of power-off process and making the kernel_can_power_off()
check the legacy pm_power_off presence.
Tested-by: Michael Ellerman <mpe@ellerman.id.au> # ppce500
Reported-by: Michael Ellerman <mpe@ellerman.id.au> # ppce500
Fixes: da007f171fc9 ("kernel/reboot: Change registration order of legacy power-off handler")
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The register_platform_power_off() fails on m68k platform due to the
memory allocation error that happens at a very early boot time when
memory allocator isn't available yet. Fix it by using a static sys-off
handler for the platform-level power-off handlers.
Fixes: f0f7e5265b3b ("m68k: Switch to new sys-off handler API")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These update the ARM cpufreq drivers and fix up the CPPC cpufreq
driver after recent changes, update the OPP code and PM documentation
and add power sequences support to the system reboot and power off
code.
Specifics:
- Add Tegra234 cpufreq support (Sumit Gupta)
- Clean up and enhance the Mediatek cpufreq driver (Wan Jiabing,
Rex-BC Chen, and Jia-Wei Chang)
- Fix up the CPPC cpufreq driver after recent changes (Zheng Bin,
Pierre Gondois)
- Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine
Oudjana)
- Use list iterator only inside the list_for_each_entry loop
(Xiaomeng Tong, and Jakob Koschel)
- New APIs related to finding OPP based on interconnect bandwidth
(Krzysztof Kozlowski)
- Fix the missing of_node_put() in _bandwidth_supported() (Dan
Carpenter)
- Cleanups (Krzysztof Kozlowski, and Viresh Kumar)
- Add Out of Band mode description to the intel-speed-select utility
documentation (Srinivas Pandruvada)
- Add power sequences support to the system reboot and power off code
and make related platform-specific changes for multiple platforms
(Dmitry Osipenko, Geert Uytterhoeven)"
* tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (60 commits)
cpufreq: CPPC: Fix unused-function warning
cpufreq: CPPC: Fix build error without CONFIG_ACPI_CPPC_CPUFREQ_FIE
Documentation: admin-guide: PM: Add Out of Band mode
kernel/reboot: Change registration order of legacy power-off handler
m68k: virt: Switch to new sys-off handler API
kernel/reboot: Add devm_register_restart_handler()
kernel/reboot: Add devm_register_power_off_handler()
soc/tegra: pmc: Use sys-off handler API to power off Nexus 7 properly
reboot: Remove pm_power_off_prepare()
regulator: pfuze100: Use devm_register_sys_off_handler()
ACPI: power: Switch to sys-off handler API
memory: emif: Use kernel_can_power_off()
mips: Use do_kernel_power_off()
ia64: Use do_kernel_power_off()
x86: Use do_kernel_power_off()
sh: Use do_kernel_power_off()
m68k: Switch to new sys-off handler API
powerpc: Use do_kernel_power_off()
xen/x86: Use do_kernel_power_off()
parisc: Use do_kernel_power_off()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"For two kernel releases now kernel/sysctl.c has been being cleaned up
slowly, since the tables were grossly long, sprinkled with tons of
#ifdefs and all this caused merge conflicts with one susbystem or
another.
This tree was put together to help try to avoid conflicts with these
cleanups going on different trees at time. So nothing exciting on this
pull request, just cleanups.
Thanks a lot to the Uniontech and Huawei folks for doing some of this
nasty work"
* tag 'sysctl-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (28 commits)
sched: Fix build warning without CONFIG_SYSCTL
reboot: Fix build warning without CONFIG_SYSCTL
kernel/kexec_core: move kexec_core sysctls into its own file
sysctl: minor cleanup in new_dir()
ftrace: fix building with SYSCTL=y but DYNAMIC_FTRACE=n
fs/proc: Introduce list_for_each_table_entry for proc sysctl
mm: fix unused variable kernel warning when SYSCTL=n
latencytop: move sysctl to its own file
ftrace: fix building with SYSCTL=n but DYNAMIC_FTRACE=y
ftrace: Fix build warning
ftrace: move sysctl_ftrace_enabled to ftrace.c
kernel/do_mount_initrd: move real_root_dev sysctls to its own file
kernel/delayacct: move delayacct sysctls to its own file
kernel/acct: move acct sysctls to its own file
kernel/panic: move panic sysctls to its own file
kernel/lockdep: move lockdep sysctls to its own file
mm: move page-writeback sysctls to their own file
mm: move oom_kill sysctls to their own file
kernel/reboot: move reboot sysctls to its own file
sched: Move energy_aware sysctls to topology.c
...
|
|
We're unconditionally registering sys-off handler for the legacy
pm_power_off() callback, this causes problem for platforms that don't
use power-off handlers at all and should be halted. Now reboot syscall
assumes that there is a power-off handler installed and tries to power
off system instead of halting it.
To fix the trouble, move the handler's registration to the reboot syscall
and check the pm_power_off() presence.
Fixes: 0e2110d2e910 ("kernel/reboot: Add kernel_can_power_off()")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add devm_register_restart_handler() helper that registers sys-off
handler using restart mode and with a default priority. Most drivers
will want to register restart handler with a default priority, so this
helper will reduce the boilerplate code and make code easier to read and
follow.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add devm_register_power_off_handler() helper that registers sys-off
handler using power-off mode and with a default priority. Most drivers
will want to register power-off handler with a default priority, so this
helper will reduce the boilerplate code and make code easier to read and
follow.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
All pm_power_off_prepare() users were converted to sys-off handler API.
Remove the obsolete global callback variable.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add platform-level registration helpers that will ease transition of the
arch/platform power-off callbacks to the new sys-off based API, allowing
us to remove the global pm_power_off variable in the future.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add kernel_can_power_off() helper that replaces open-coded checks of
the global pm_power_off variable. This is a necessary step towards
supporting chained power-off handlers.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add weak stub for the global pm_power_off callback variable. This will
allow us to remove pm_power_off definitions from arch/ code and transition
to the new sys-off based API that will replace the global variable.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add do_kernel_power_off() helper that will remove open-coded pm_power_off
invocations from the architecture code. This is the first step on the way
to remove the global pm_power_off variable, which will allow us to
implement consistent power-off chaining support.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Wrap legacy power-off callbacks into sys-off handlers in order to
support co-existence of both legacy and new callbacks while we're
in process of upgrading legacy callbacks to the new API.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In order to support power-off chaining we need to get rid of the global
pm_* variables, replacing them with the new kernel API functions that
support chaining.
Introduce new generic sys-off handler API that brings the following
features:
1. Power-off and restart handlers are registered using same API function
that supports chaining, hence all power-off and restart modes will
support chaining using this unified function.
2. Prevents notifier priority collisions by disallowing registration of
multiple handlers at the non-default priority level.
3. Supports passing opaque user argument to callback, which allows us to
remove global variables from drivers.
This patch adds support of the following sys-off modes:
- SYS_OFF_MODE_POWER_OFF_PREPARE that replaces global pm_power_off_prepare
variable and provides chaining support for power-off-prepare handlers.
- SYS_OFF_MODE_POWER_OFF that replaces global pm_power_off variable and
provides chaining support for power-off handlers.
- SYS_OFF_MODE_RESTART that provides a better restart API, removing a need
from drivers to have a global scratch variable by utilizing the opaque
callback argument.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If CONFIG_SYSCTL is n, build warn:
kernel/reboot.c:443:20: error: ‘kernel_reboot_sysctls_init’ defined but not used [-Werror=unused-function]
static void __init kernel_reboot_sysctls_init(void)
^~~~~~~~~~~~~~~~~~~~~~~~~~
Move kernel_reboot_sysctls_init() to #ifdef block to fix this.
Fixes: 06d177662fb8 ("kernel/reboot: move reboot sysctls to its own file")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Once kthread printing is available, console printing will no longer
occur in the context of the printk caller. However, there are some
special contexts where it is desirable for the printk caller to
directly print out kernel messages. Using pr_flush() to wait for
threaded printers is only possible if the caller is in a sleepable
context and the kthreads are active. That is not always the case.
Introduce printk_prefer_direct_enter() and printk_prefer_direct_exit()
functions to explicitly (and globally) activate/deactivate preferred
direct console printing. The term "direct console printing" refers to
printing to all enabled consoles from the context of the printk
caller. The term "prefer" is used because this type of printing is
only best effort. If the console is currently locked or other
printers are already actively printing, the printk caller will need
to rely on the other contexts to handle the printing.
This preferred direct printing is how all printing has been handled
until now (unless it was explicitly deferred).
When kthread printing is introduced, there may be some unanticipated
problems due to kthreads being unable to flush important messages.
In order to minimize such risks, preferred direct printing is
activated for the primary important messages when the system
experiences general types of major errors. These are:
- emergency reboot/shutdown
- cpu and rcu stalls
- hard and soft lockups
- hung tasks
- warn
- sysrq
Note that since kthread printing does not yet exist, no behavior
changes result from this commit. This is only implementing the
counter and marking the various places where preferred direct
printing is active.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org> # for RCU
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220421212250.565456-13-john.ogness@linutronix.de
|
|
kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.
To help with this maintenance let's start by moving sysctls to places
where they actually belong. The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.
All filesystem syctls now get reviewed by fs folks. This commit
follows the commit of fs, move the poweroff_cmd and ctrl-alt-del
sysctls to its own file, kernel/reboot.c.
Signed-off-by: tangmeng <tangmeng@uniontech.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
"Just one new driver (Cypress StreetFighter touchkey), and no input
core changes this time.
Plus various fixes and enhancements to existing drivers"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (54 commits)
Input: iforce - fix control-message timeout
Input: wacom_i2c - use macros for the bit masks
Input: ili210x - reduce sample period to 15ms
Input: ili210x - improve polled sample spacing
Input: ili210x - special case ili251x sample read out
Input: elantench - fix misreporting trackpoint coordinates
Input: synaptics-rmi4 - Fix device hierarchy
Input: i8042 - Add quirk for Fujitsu Lifebook T725
Input: cap11xx - add support for cap1206
Input: remove unused header <linux/input/cy8ctmg110_pdata.h>
Input: ili210x - add ili251x firmware update support
Input: ili210x - export ili251x version details via sysfs
Input: ili210x - use resolution from ili251x firmware
Input: pm8941-pwrkey - respect reboot_mode for warm reset
reboot: export symbol 'reboot_mode'
Input: max77693-haptic - drop unneeded MODULE_ALIAS
Input: cpcap-pwrbutton - do not set input parent explicitly
Input: max8925_onkey - don't mark comment as kernel-doc
Input: ads7846 - do not attempt IRQ workaround when deferring probe
Input: ads7846 - use input_set_capability()
...
|
|
Link: https://lkml.kernel.org/r/20211020174406.17889-3-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Some drivers like Qualcomm pm8941-pwrkey need to access 'reboot_mode'
for triggering reboot between cold and warm mode. Export the symbol, so
that drivers built as module can still access the symbol.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210714095850.27185-2-shawn.guo@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
There can be few cases when we need to shut-down the system in order to
protect the hardware. Currently this is done at least by the thermal core
when temperature raises over certain limit.
Some PMICs can also generate interrupts for example for over-current or
over-voltage, voltage drops, short-circuit, ... etc. On some systems
these are a sign of hardware failure and only thing to do is try to
protect the rest of the hardware by shutting down the system.
Add shut-down logic which can be used by all subsystems instead of
implementing the shutdown in each subsystem. The logic is stolen from
thermal_core with difference of using atomic_t instead of a mutex in
order to allow calls directly from IRQ context and changing the WARN()
to pr_emerg() as discussed here:
https://lore.kernel.org/lkml/YJuPwAZroVZ%2Fw633@alley/
and here:
https://lore.kernel.org/linux-iommu/20210331093104.383705-4-geert+renesas@glider.be/
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/e83ec1ca9408f90c857ea9dcdc57b14d9037b03f.1622628333.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This reverts commit d60cd06331a3566d3305b3c7b566e79edf4e2095.
This patch causes a panic when rebooting my Dell Poweredge r440. I do
not have the full panic log as it's lost at that stage of the reboot and
I do not have a serial console. Reverting this patch makes my system
able to reboot again.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Not all the reboot settings from both the kernel command line or sysfs
interface are available to all platforms.
Filter out reboot_type and reboot_force which are x86 only, and also
remove reboot_cpu on kernels without SMP support.
This saves some space, and avoid confusing the user with settings which
will have no effect.
Link: https://lkml.kernel.org/r/20201130173717.198952-3-mcroce@linux.microsoft.com
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "reboot: sysfs improvements".
Some improvements to the sysfs reboot interface: hide not working settings
and support machines with known reboot quirks.
This patch (of 2):
On some machines a quirk can force a specific reboot type. Quirks are
found during a DMI scan, the list of machines which need special reboot
handling is defined in reboot_dmi_table.
The kernel command line reboot= option overrides this via a global
variable `reboot_default`, so that the reboot type requested in the
command line is really performed.
This was not true when setting the reboot type via the new sysfs
interface. Fix this by setting reboot_default upon the first change, like
reboot_setup() does for the command line.
Link: https://lkml.kernel.org/r/20201130173717.198952-1-mcroce@linux.microsoft.com
Link: https://lkml.kernel.org/r/20201130173717.198952-2-mcroce@linux.microsoft.com
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
BOOT_CF9_SAFE_STR is an internal value used only by the x86 code and it's
not possible to set it from userspace.
Remove it, and rename 'cf9_force' to 'pci', so to make it coherent with
the kernel command line reboot= option.
Tested with this script:
cd /sys/kernel/reboot/
for i in cold warm hard soft gpio; do
echo $i >mode
read j <mode
[ $i = $j ] || echo "mode $i != $j"
done
for i in bios acpi kbd triple efi pci; do
echo $i >type
read j <type
[ $i = $j ] || echo "type $i != $j"
done
for i in $(seq 0 $(nproc --ignore=1)); do
echo $i >cpu
read j <cpu
[ $i = $j ] || echo "cpu $i != $j"
done
for i in 0 1; do
echo $i >force
read j <force
[ $i = $j ] || echo "force $i != $j"
done
Link: https://lkml.kernel.org/r/20201113015900.543923-1-mcroce@linux.microsoft.com
Fixes: eab8da48579d ("reboot: allow to specify reboot mode via sysfs")
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The kernel cmdline reboot= option offers some sort of control on how the
reboot is issued.
We don't always know in advance what type of reboot to perform.
Sometimes a warm reboot is preferred to persist certain memory regions
across the reboot. Others a cold one is needed to apply a future system
update that makes a memory memory model change, like changing the base
page size or resizing a persistent memory region.
Or simply we want to enable reboot_force because we noticed that
something bad happened.
Add handles in sysfs to allow setting these reboot options, so they can
be changed when the system is booted, other than at boot time.
The handlers are under <sysfs>/kernel/reboot, can be read to get the
current configuration and written to alter it.
# cd /sys/kernel/reboot/
# grep . *
cpu:0
force:0
mode:cold
type:acpi
# echo 2 >cpu
# echo yes >force
# echo soft >mode
# echo bios >type
# grep . *
cpu:2
force:1
mode:soft
type:bios
Before setting anything, check for CAP_SYS_BOOT capability, so it's
possible to allow an unpriviledged process to change these settings simply
by relaxing the handles permissions, without opening them to the world.
[natechancellor@gmail.com: fix variable assignments in type_store]
Link: https://lkml.kernel.org/r/20201112035023.974748-1-natechancellor@gmail.com
Link: https://github.com/ClangBuiltLinux/linux/issues/1197
Link: https://lkml.kernel.org/r/20201110202746.9690-1-mcroce@linux.microsoft.com
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tyler Hicks <tyhicks@linux.microsoft.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Small improvements to the code, without changing the way it works:
- use a local variable, to avoid a small time lapse where reboot_cpu
can have an invalid value
- comment the code which is not easy to understand at a glance
- merge two identical code blocks into one
- replace pointer arithmetics with equivalent array syntax
Link: https://lkml.kernel.org/r/20201103214025.116799-4-mcroce@linux.microsoft.com
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Robin Holt <robinmholt@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
* pm-sleep:
PM: sleep: Add dev_wakeup_path() helper
PM / suspend: fix kernel-doc markup
PM: sleep: Print driver flags for all devices during suspend/resume
* pm-acpi:
PM: ACPI: Refresh wakeup device power configuration every time
PM: ACPI: PCI: Drop acpi_pm_set_bridge_wakeup()
PM: ACPI: reboot: Use S5 for reboot
* pm-domains:
PM: domains: create debugfs nodes when adding power domains
PM: domains: replace -ENOTSUPP with -EOPNOTSUPP
* powercap:
powercap: Adjust printing the constraint name with new line
powercap: RAPL: Add AMD Fam19h RAPL support
powercap: Add AMD Fam17h RAPL support
powercap/intel_rapl_msr: Convert rapl_msr_priv into pointer
x86/msr-index: sort AMD RAPL MSRs by address
|
|
Limit the CPU number to num_possible_cpus(), because setting it to a
value lower than INT_MAX but higher than NR_CPUS produces the following
error on reboot and shutdown:
BUG: unable to handle page fault for address: ffffffff90ab1bb0
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 1c09067 P4D 1c09067 PUD 1c0a063 PMD 0
Oops: 0000 [#1] SMP
CPU: 1 PID: 1 Comm: systemd-shutdow Not tainted 5.9.0-rc8-kvm #110
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
RIP: 0010:migrate_to_reboot_cpu+0xe/0x60
Code: ea ea 00 48 89 fa 48 c7 c7 30 57 f1 81 e9 fa ef ff ff 66 2e 0f 1f 84 00 00 00 00 00 53 8b 1d d5 ea ea 00 e8 14 33 fe ff 89 da <48> 0f a3 15 ea fc bd 00 48 89 d0 73 29 89 c2 c1 e8 06 65 48 8b 3c
RSP: 0018:ffffc90000013e08 EFLAGS: 00010246
RAX: ffff88801f0a0000 RBX: 0000000077359400 RCX: 0000000000000000
RDX: 0000000077359400 RSI: 0000000000000002 RDI: ffffffff81c199e0
RBP: ffffffff81c1e3c0 R08: ffff88801f41f000 R09: ffffffff81c1e348
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 00007f32bedf8830 R14: 00000000fee1dead R15: 0000000000000000
FS: 00007f32bedf8980(0000) GS:ffff88801f480000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffff90ab1bb0 CR3: 000000001d057000 CR4: 00000000000006a0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
__do_sys_reboot.cold+0x34/0x5b
do_syscall_64+0x2d/0x40
Fixes: 1b3a5d02ee07 ("reboot: move arch/x86 reboot= handling to generic kernel")
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Robin Holt <robinmholt@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201103214025.116799-3-mcroce@linux.microsoft.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "fix parsing of reboot= cmdline", v3.
The parsing of the reboot= cmdline has two major errors:
- a missing bound check can crash the system on reboot
- parsing of the cpu number only works if specified last
Fix both.
This patch (of 2):
This reverts commit 616feab753972b97.
kstrtoint() and simple_strtoul() have a subtle difference which makes
them non interchangeable: if a non digit character is found amid the
parsing, the former will return an error, while the latter will just
stop parsing, e.g. simple_strtoul("123xyx") = 123.
The kernel cmdline reboot= argument allows to specify the CPU used for
rebooting, with the syntax `s####` among the other flags, e.g.
"reboot=warm,s31,force", so if this flag is not the last given, it's
silently ignored as well as the subsequent ones.
Fixes: 616feab75397 ("kernel/reboot.c: convert simple_strtoul to kstrtoint")
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Robin Holt <robinmholt@gmail.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201103214025.116799-2-mcroce@linux.microsoft.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
After reboot, it's not possible to use hotkeys to enter BIOS setup
and boot menu on some HP laptops.
BIOS folks identified the root cause is the missing _PTS call, and
BIOS is expecting _PTS to do proper reset.
Using S5 for reboot is default behavior under Windows, "A full
shutdown (S5) occurs when a system restart is requested" [1], so
let's do the same here.
[1] https://docs.microsoft.com/en-us/windows/win32/power/system-power-states
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The unicore32 port do not seem maintained for a long time now, there is no
upstream toolchain that can create unicore32 binaries and all the links to
prebuilt toolchains for unicore32 are dead. Even compilers that were
available are not supported by the kernel anymore.
Guenter Roeck says:
I have stopped building unicore32 images since v4.19 since there is no
available compiler that is still supported by the kernel. I am surprised
that support for it has not been removed from the kernel.
Remove unicore32 port.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
|
|
To turn the KMSG_DUMP_* reasons into a more ordered list, collapse
the redundant KMSG_DUMP_(RESTART|HALT|POWEROFF) reasons into
KMSG_DUMP_SHUTDOWN. The current users already don't meaningfully
distinguish between them, so there's no need to, as discussed here:
https://lore.kernel.org/lkml/CA+CK2bAPv5u1ih5y9t5FUnTyximtFCtDYXJCpuyjOyHNOkRdqw@mail.gmail.com/
Link: https://lore.kernel.org/lkml/20200515184434.8470-2-keescook@chromium.org/
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have EXPORT_.*_SYMBOL_GPL inside which was used in the
initial scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Allow specifying reboot_mode for panic only. This is needed on systems
where ramoops is used to store panic logs, and user wants to use warm
reset to preserve those, while still having cold reset on normal
reboots.
Link: http://lkml.kernel.org/r/20190322004735.27702-1-aaro.koskinen@iki.fi
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Export pm_power_off_prepare. It is needed to implement power off on
Freescale/NXP iMX6 based boards with external power management
integrated circuit (PMIC).
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
At present, "systemctl suspend" and "shutdown" can run in parrallel. A
system can suspend after devices_shutdown(), and resume. Then the shutdown
task goes on to power off. This causes many devices are not really shut
off. Hence replacing reboot_mutex with system_transition_mutex (renamed
from pm_mutex) to achieve the exclusion. The renaming of pm_mutex as
system_transition_mutex can be better to reflect the purpose of the mutex.
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add devm_* wrapper around register_reboot_notifier to simplify device
specific reboot notifier registration/unregistration.
[akpm@linux-foundation.org: move `struct device' forward decl to top-of-file]
Link: http://lkml.kernel.org/r/20170320171753.1705-1-andrew.smirnov@gmail.com
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are two kexec load syscalls, kexec_load another and kexec_file_load.
kexec_file_load has been splited as kernel/kexec_file.c. In this patch I
split kexec_load syscall code to kernel/kexec.c.
And add a new kconfig option KEXEC_CORE, so we can disable kexec_load and
use kexec_file_load only, or vice verse.
The original requirement is from Ted Ts'o, he want kexec kernel signature
being checked with CONFIG_KEXEC_VERIFY_SIG enabled. But kexec-tools use
kexec_load syscall can bypass the checking.
Vivek Goyal proposed to create a common kconfig option so user can compile
in only one syscall for loading kexec kernel. KEXEC/KEXEC_FILE selects
KEXEC_CORE so that old config files still work.
Because there's general code need CONFIG_KEXEC_CORE, so I updated all the
architecture Kconfig with a new option KEXEC_CORE, and let KEXEC selects
KEXEC_CORE in arch Kconfig. Also updated general kernel code with to
kexec_load syscall.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Dave Young <dyoung@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Petr Tesarik <ptesarik@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Josh Boyer <jwboyer@fedoraproject.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The kernel has orderly_poweroff which allows the kernel to initiate a
graceful shutdown of userspace, by running /sbin/poweroff. This adds
orderly_reboot that will cause userspace to shut itself down by calling
/sbin/reboot.
This will be used for shutdown initiated by a system controller on
platforms that do not use ACPI.
orderly_reboot() should be used when the system wants to allow userspace
to gracefully shut itself down. For cases where the system may imminently
catch on fire, the existing emergency_restart() provides an immediate
reboot without involving userspace.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jeremy Kerr <jk@ozlabs.org>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Various drivers implement architecture and/or device specific means to
restart (reset) the system. Various mechanisms have been implemented to
support those schemes. The best known mechanism is arm_pm_restart, which
is a function pointer to be set either from platform specific code or from
drivers. Another mechanism is to use hardware watchdogs to issue a reset;
this mechanism is used if there is no other method available to reset a
board or system. Two examples are alim7101_wdt, which currently uses the
reboot notifier to trigger a reset, and moxart_wdt, which registers the
arm_pm_restart function.
The existing mechanisms have a number of drawbacks. Typically only one
scheme to restart the system is supported (at least if arm_pm_restart is
used). At least in theory there can be multiple means to restart the
system, some of which may be less desirable (for example one mechanism may
only reset the CPU, while another may reset the entire system). Using
arm_pm_restart can also be racy if the function pointer is set from a
driver, as the driver may be in the process of being unloaded when
arm_pm_restart is called. Using the reboot notifier is always racy, as it
is unknown if and when other functions using the reboot notifier have
completed execution by the time the watchdog fires.
Introduce a system restart handler call chain to solve the described
problems. This call chain is expected to be executed from the
architecture specific machine_restart() function. Drivers providing
system restart functionality (such as the watchdog drivers mentioned
above) are expected to register with this call chain. By using the
priority field in the notifier block, callers can control restart handler
execution sequence and thus ensure that the restart handler with the
optimal restart capabilities for a given system is called first.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
