Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"There is a new driver for the RTC of the Mstar SSD202D SoC. The
rtc7301 driver gains support for byte addresses to support the
USRobotics USR8200. Then we have many non user visible changes and
typo fixes.
Summary:
Subsytem:
- convert platform drivers to remove_new
- prevent modpost warnings for unremovable platform drivers
New driver:
- Mstar SSD202D
Drivers:
- brcmstb-waketimer: support level alarm_irq
- ep93xx: add DT support
- rtc7301: support byte-addressed IO"
* tag 'rtc-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (28 commits)
dt-bindings: rtc: Add Mstar SSD202D RTC
rtc: Add support for the SSD202D RTC
rtc: at91rm9200: annotate at91_rtc_remove with __exit again
dt-bindings: rtc: microcrystal,rv3032: Document wakeup-source property
dt-bindings: rtc: pcf8523: Convert to YAML
dt-bindings: rtc: mcp795: move to trivial-rtc
rtc: ep93xx: add DT support for Cirrus EP93xx
dt-bindings: rtc: Add Cirrus EP93xx
dt-bindings: rtc: pcf2123: convert to YAML
rtc: efi: fixed typo in efi_procfs()
rtc: omap: Use device_get_match_data()
rtc: pcf85363: fix wrong mask/val parameters in regmap_update_bits call
rtc: rtc7301: Support byte-addressed IO
rtc: rtc7301: Rewrite bindings in schema
rtc: sh: Convert to platform remove callback returning void
rtc: pxa: Convert to platform remove callback returning void
rtc: mv: Convert to platform remove callback returning void
rtc: imxdi: Convert to platform remove callback returning void
rtc: at91rm9200: Convert to platform remove callback returning void
rtc: pcap: Drop no-op remove function
...
|
|
Binding for fixed NVMEM cells defined directly as NVMEM device subnodes
has been deprecated. It has been replaced by the "fixed-layout" NVMEM
layout binding.
New syntax is meant to be clearer and should help avoiding imprecise
bindings.
NVMEM subsystem already supports the new binding. It should be a good
idea to limit support for old syntax to existing drivers that actually
support & use it (we can't break backward compatibility!). That way we
additionally encourage new bindings & drivers to ignore deprecated
binding.
It wasn't clear (to me) if rtc and w1 code actually uses old syntax
fixed cells. I enabled them to don't risk any breakage.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
[for meson-{efuse,mx-efuse}.c]
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[for mtk-efuse.c, nvmem/core.c, nvmem-provider.h]
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
[MT8192, MT8195 Chromebooks]
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
[for microchip-otpc.c]
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
[SAMA7G5-EK]
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231020105545.216052-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Newer SigmaStar SSD202D SoCs contain a Real Time Clock, capable of
running while the system is sleeping (battery powered), this is not the
case with the other RTC on older SoCs. This adds basic support for this
RTC block.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Co-developed-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/r/20230913151606.69494-2-romain.perier@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Having the driver as a builtin after dropping the __exit annotation results
in:
>> drivers/rtc/rtc-at91rm9200.c:561:13: warning: 'at91_rtc_remove' defined but not used [-Wunused-function]
561 | static void at91_rtc_remove(struct platform_device *pdev)
| ^~~~~~~~~~~~~~~
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310160705.vlElNOGb-lkp@intel.com/
Link: https://lore.kernel.org/r/20231016041816.246426-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Add OF ID match table.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Link: https://lore.kernel.org/r/20230915-ep93xx-v4-14-a1d779dcec10@maquefel.me
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
After the first check of the value of the "eft" variable
it does not change, it is obvious that a copy-paste
error was made here and the value of variable "alm"
should be checked here.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 501385f2a783 ("rtc: efi: add efi_procfs in efi_rtc_ops")
Signed-off-by: Maxim Korotkov <korotkov.maxim.s@gmail.com>
Link: https://lore.kernel.org/r/20231006090444.306729-1-korotkov.maxim.s@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231009211356.3242037-12-robh@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The current implementation passes PIN_IO_INTA_OUT (2) as a mask and
PIN_IO_INTAPM (GENMASK(1, 0)) as a value.
Swap the variables to assign mask and value the right way.
This error was first introduced with the alarm support. For better or
worse it worked as expected because 0x02 was applied as a mask to 0x03,
resulting 0x02 anyway. This will of course not work for any other value.
Fixes: e5aac267a10a ("rtc: pcf85363: add alarm support")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20231013-topic-pcf85363_regmap_update_bits-v1-1-c454f016f71f@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The old RTC7301 driver in OpenWrt used byte access, but the
current mainline Linux driver uses 32bit word access.
Make this configurable using device properties using the
standard property "reg-io-width" in e.g. device tree.
This is needed for the USRobotics USR8200 which has the
chip connected using byte accesses.
Debugging and testing by Howard Harte.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com>
Link: https://lore.kernel.org/r/20231010-rtc-7301-regwidth-v3-2-ade586b62794@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231002080529.2535610-13-u.kleine-koenig@pengutronix.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231002080529.2535610-12-u.kleine-koenig@pengutronix.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231002080529.2535610-11-u.kleine-koenig@pengutronix.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231002080529.2535610-10-u.kleine-koenig@pengutronix.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231002080529.2535610-9-u.kleine-koenig@pengutronix.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
A remove callback that just returns 0 is equivalent to no callback at
all as can be seen in platform_remove(). So simplify accordingly.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231002080529.2535610-8-u.kleine-koenig@pengutronix.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
As described in the added code comment, a reference to .exit.text is ok
for drivers registered via module_platform_driver_probe(). Make this
explicit to prevent a section mismatch warning.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231002080529.2535610-7-u.kleine-koenig@pengutronix.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
As described in the added code comment, a reference to .exit.text is ok
for drivers registered via module_platform_driver_probe(). Make this
explicit to prevent a section mismatch warning.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231002080529.2535610-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
As described in the added code comment, a reference to .exit.text is ok
for drivers registered via module_platform_driver_probe(). Make this
explicit to prevent a section mismatch warning.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231002080529.2535610-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
warning
As described in the added code comment, a reference to .exit.text is ok
for drivers registered via module_platform_driver_probe(). Make this
explicit to prevent a section mismatch warning.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231002080529.2535610-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
mismatch warning
As described in the added code comment, a reference to .exit.text is ok
for drivers registered via module_platform_driver_probe(). Make this
explicit to prevent a section mismatch warning.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231002080529.2535610-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The driver compiles fine on x86_64, so soften the dependencies to
ARCH_MXC || COMPILE_TEST.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231002080529.2535610-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Some devices (e.g. BCM72112) use an alarm_irq interrupt that is
connected to a level interrupt controller rather than an edge
interrupt controller. In this case, the interrupt cannot be left
enabled by the irq handler while preserving the hardware wake-up
signal on wake capable devices or an interrupt storm will occur.
The alarm_expired flag is introduced to allow the disabling of
the interrupt when an alarm expires and to support balancing the
calls to disable_irq() and enable_irq() in accordance with the
existing design.
Fixes: 24304a87158a ("rtc: brcmstb-waketimer: allow use as non-wake alarm")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230830224747.1663044-1-opendmb@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Silence:
drivers/rtc/rtc-sh.c:517:58: warning: '%d' directive output may be truncated writing between 1 and 10 bytes into a region of size 3 [-Wformat-truncation=]
Link: https://lore.kernel.org/r/20230911095052.1292869-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- Add a way for drivers to tell the core the supported alarm range is
smaller than the date range. This is not used yet but will be
useful for the alarmtimers in the next release.
- fix Wvoid-pointer-to-enum-cast warnings
- remove redundant of_match_ptr()
- stop warning for invalid alarms when the alarm is disabled
Drivers:
- isl12022: allow setting the trip level for battery level detection
- pcf2127: add support for PCF2131 and multiple timestamps
- stm32: time precision improvement, many fixes
- twl: NVRAM support"
* tag 'rtc-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (73 commits)
dt-bindings: rtc: ds3231: Remove text binding
rtc: wm8350: remove unnecessary messages
rtc: twl: remove unnecessary messages
rtc: sun6i: remove unnecessary message
rtc: stop warning for invalid alarms when the alarm is disabled
rtc: twl: add NVRAM support
rtc: pcf85363: Allow to wake up system without IRQ
rtc: m48t86: add DT support for m48t86
dt-bindings: rtc: Add ST M48T86
rtc: pcf2127: remove useless check
rtc: rzn1: Report maximum alarm limit to rtc core
rtc: ds1305: Report maximum alarm limit to rtc core
rtc: tps6586x: Report maximum alarm limit to rtc core
rtc: cmos: Report supported alarm limit to rtc infrastructure
rtc: cros-ec: Detect and report supported alarm window size
rtc: Add support for limited alarm timer offsets
rtc: isl1208: Fix incorrect logic in isl1208_set_xtoscb()
MAINTAINERS: remove obsolete pattern in RTC SUBSYSTEM section
rtc: tps65910: Remove redundant dev_warn() and do not check for 0 return after calling platform_get_irq()
rtc: omap: Do not check for 0 return after calling platform_get_irq()
...
|
|
The RTC core already prints a message when the RTC is registered and when
registering fails, it is not necessary to have more in the driver.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230827221643.544259-3-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The RTC core already prints a message when the RTC is registered and when
registering fails, it is not necessary to have more in the driver.
Link: https://lore.kernel.org/r/20230827221643.544259-2-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The core already print a message once the rtc is successfully registered,
it is not necessary to print an other one.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230827221643.544259-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
When the alarm is not enabled, it may never have been set and so we can't
expect it to be valid. This will prevent the apparition of boot messages
like this one:
rtc rtc0: invalid alarm value: 2023-7-8 45:85:85
Link: https://lore.kernel.org/r/20230827221532.543353-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Export SRAM using nvmem.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/ZDf7qZTiml0ijD2g@lenoch
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
When wakeup-source is set in the devicetree, set up the device for
using the output as interrupt instead of clock. This is similar to
how other RTC devices handle this.
This allows the clock chip to turn on the board when wired to do
so in hardware.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Link: https://lore.kernel.org/r/20230821072013.7072-1-mike.looijmans@topic.nl
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Add OF ID match table.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/lkml/20230601054549.10843-12-nikita.shubin@maquefel.me/
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Link: https://lore.kernel.org/r/20230823-m48t86_device_tree-v2-2-21ff275f949d@maquefel.me
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
This check is only useful when introducing support for a new RTC in the
driver. Cut down the number of strings in th driver.
Link: https://lore.kernel.org/r/20230827214649.537095-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
RZN1 only supports alarms up to one week in the future.
Report the limit to the RTC core and use the reported limit
to validate the requested alarm time when setting it.
Cc: Brian Norris <briannorris@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230817225537.4053865-8-linux@roeck-us.net
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
DS1305 only supports alarms up to 24 hours in the future.
Report the limit to the RTC core, and use the reported limit
to validate the requested alarm time when setting it.
If the alarm is too large when trying to set an alarm, return -ERANGE
instead of -EDOM to align with error codes returned by other rtc drivers.
Cc: Brian Norris <briannorris@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230817225537.4053865-7-linux@roeck-us.net
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
tps6586x only supports alarms up to 16,383 seconds in the future.
Report the limit to the RTC core.
Cc: Brian Norris <briannorris@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230817225537.4053865-6-linux@roeck-us.net
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The alarm window supported by the cmos RTC depends on the chip
and its configuration. Report the limit to the RTC core.
Cc: Brian Norris <briannorris@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230817225537.4053865-5-linux@roeck-us.net
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The RTC on some older Chromebooks can only handle alarms less than
24 hours in the future. The only way to find out is to try to set
an alarm further in the future. If that fails, assume that the RTC
connected to the EC can only handle less than 24 hours of alarm
window, and report that value to the RTC core.
After that change, it is no longer necessary to limit the alarm time
when setting it. Report any excessive alarms to the caller instead.
Cc: Brian Norris <briannorris@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230817225537.4053865-4-linux@roeck-us.net
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The XTOSCB bit is not bit 0, but xtosb_val is either 0 or 1. If it is 1,
test will never succeed. Fix this issue by using double negation.
While at it, remove unnecessary blank line from probe().
Reported-by: Pavel Machek <pavel@denx.de>
Closes: https://lore.kernel.org/all/ZN4BgzG2xmzOzdFZ@duo.ucw.cz/
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Pavel Machek <pavel@denx.de>
Link: https://lore.kernel.org/r/20230817161038.407960-1-biju.das.jz@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
after calling platform_get_irq()
It is not possible for platform_get_irq() to return 0. Use the
return value from platform_get_irq().
And there is no need to call the dev_warn() function directly to print
a custom message when handling an error from platform_get_irq()
function as it is going to display an appropriate error message
in case of a failure.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230803080713.4061782-3-ruanjinjie@huawei.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
It is not possible for platform_get_irq() to return 0. Use the
return value from platform_get_irq().
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230803080713.4061782-2-ruanjinjie@huawei.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
This keeps the IRQ enabled during system suspend, if the RTC's wakeup
source is enabled. Since the IRQ is not required to wake from shutdown,
continue to add the wakeup source even if registering the wakeirq fails.
See commit 029d3a6f2f3c ("rtc: da9063: add as wakeup source").
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20230717190937.1301509-1-samuel.holland@sifive.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/rtc/rtc-pcf2127.c: In function ‘pcf2127_probe’:
drivers/rtc/rtc-pcf2127.c:635:32: warning: unused parameter ‘name’ [-Wunused-parameter]
635 | int alarm_irq, const char *name, bool is_pcf2127)
| ~~~~~~~~~~~~^~~~
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20230801190432.3340545-1-hugo@hugovil.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
If PCF2127 device is absent from the I2C bus, or if there is a
communication problem, disabling POR0 may fail silently and we
still continue with probing the device. In that case, abort probe
operation.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20230728171211.3016019-1-hugo@hugovil.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
This error path accidentally returns success. Return -EINVAL instead.
Fixes: 420cc9e850db ("rtc: pcf2127: add support for multiple TS functions")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Reviewed-by: Hugo Villeneuve <hugo@hugovil.com>
Reviewed-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/55b9c84b-9d21-444f-b91a-cf9316b65833@moroto.mountain
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
This converts the DS2404 to use GPIO descriptors instead of
hard-coded global GPIO numbers.
The platform data can be deleted because there are no in-tree
users and it only contained GPIO numbers which are now
passed using descriptor tables (or device tree or ACPI).
The driver was rewritten to use a state container for the
device driver state (struct ds2404 *chip) and pass that
around instead of using a global singleton storage for the
GPIO handles.
When declaring GPIO descriptor tables or other hardware
descriptions for the RTC driver, implementers should take care
to flag the RESET line as active low, such as by using the
GPIOD_ACTIVE_LOW flag in the descriptor table.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230807-descriptors-rtc-v1-1-ce0f9187576e@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
After the switch to SET_NOIRQ_SYSTEM_SLEEP_PM_OPS() and a subsequent
fix, stm32_rtc_{suspend,resume}() are unused when CONFIG_PM_SLEEP is not
set because SET_NOIRQ_SYSTEM_SLEEP_PM_OPS() is a no-op in that
configuration:
drivers/rtc/rtc-stm32.c:904:12: error: 'stm32_rtc_resume' defined but not used [-Werror=unused-function]
904 | static int stm32_rtc_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~
drivers/rtc/rtc-stm32.c:894:12: error: 'stm32_rtc_suspend' defined but not used [-Werror=unused-function]
894 | static int stm32_rtc_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
The non-"SET_" version of this macro, NOIRQ_SYSTEM_SLEEP_PM_OPS(), is
designed to handle this situation by only assigning the callbacks when
CONFIG_PM_SLEEP is set while allowing the functions to appear used to
the compiler. Switch to that macro to resolve the warnings. There is no
functional change with this, as SET_NOIRQ_SYSTEM_SLEEP_PM_OPS() is
defined using NOIRQ_SYSTEM_SLEEP_PM_OPS() when CONFIG_PM_SLEEP is set.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230815-rtc-stm32-unused-pm-funcs-v1-1-82eb8e02d903@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
'type' is an enum, thus cast of pointer on 64-bit compile test with W=1
causes:
rtc-rs5c372.c:829:19: error: cast to smaller integer type 'enum rtc_type' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230810103902.151145-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
'type' is an enum, thus cast of pointer on 64-bit compile test with W=1
causes:
rtc-jz4740.c:352:14: error: cast to smaller integer type 'enum jz4740_rtc_type' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230810103902.151145-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
'type' is an enum, thus cast of pointer on 64-bit compile test with W=1
causes:
rtc-rv8803.c:648:18: error: cast to smaller integer type 'enum rv8803_type' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230810103902.151145-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
'type' is an enum, thus cast of pointer on 64-bit compile test with W=1
causes:
rtc-ds1307.c:1747:18: error: cast to smaller integer type 'enum ds_type' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230810103902.151145-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|