summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/broadcom/genet/bcmgenet.c
AgeCommit message (Collapse)AuthorFilesLines
2023-10-08net: bcmgenet: Remove custom ndo_poll_controller()Florian Fainelli1-20/+0
The driver gained a .ndo_poll_controller() at a time where the TX cleaning process was always done from NAPI which makes this unnecessary. See commit ac3d9dd034e5 ("netpoll: make ndo_poll_controller() optional") for more background. Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-20net: ethernet: broadcom: Convert to platform remove callback returning voidUwe Kleine-König1-4/+2
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert these drivers from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-31net: bcmgenet: Remove TX ring full loggingFlorian Fainelli1-5/+1
There is no need to spam the kernel log with such an indication, remove this message. Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230728183945.760531-1-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-07net: bcmgenet: Fix EEE implementationFlorian Fainelli1-14/+8
We had a number of short comings: - EEE must be re-evaluated whenever the state machine detects a link change as wight be switching from a link partner with EEE enabled/disabled - tx_lpi_enabled controls whether EEE should be enabled/disabled for the transmit path, which applies to the TBUF block - We do not need to forcibly enable EEE upon system resume, as the PHY state machine will trigger a link event that will do that, too Fixes: 6ef398ea60d9 ("net: bcmgenet: add EEE support") Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20230606214348.2408018-1-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-16net: bcmgenet: Restore phy_stop() depending upon suspend/closeFlorian Fainelli1-3/+5
Removing the phy_stop() from bcmgenet_netif_stop() ended up causing warnings from the PHY library that phy_start() is called from the RUNNING state since we are no longer stopping the PHY state machine during bcmgenet_suspend(). Restore the call to phy_stop() but make it conditional on being called from the close or suspend path. Fixes: c96e731c93ff ("net: bcmgenet: connect and disconnect from the PHY state machine") Fixes: 93e0401e0fc0 ("net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop()") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Link: https://lore.kernel.org/r/20230515025608.2587012-1-f.fainelli@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-05-05net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop()Florian Fainelli1-1/+0
The call to phy_stop() races with the later call to phy_disconnect(), resulting in concurrent phy_suspend() calls being run from different CPUs. The final call to phy_disconnect() ensures that the PHY is stopped and suspended, too. Fixes: c96e731c93ff ("net: bcmgenet: connect and disconnect from the PHY state machine") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-30net: bcmgenet: Add a check for oversized packetsFlorian Fainelli1-0/+8
Occasionnaly we may get oversized packets from the hardware which exceed the nomimal 2KiB buffer size we allocate SKBs with. Add an early check which drops the packet to avoid invoking skb_over_panic() and move on to processing the next packet. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-09net: bcmgenet: Remove the unused functionJiapeng Chong1-18/+0
The function dmadesc_get_addr() is defined in the bcmgenet.c file, but not called elsewhere, so remove this unused function. drivers/net/ethernet/broadcom/genet/bcmgenet.c:120:26: warning: unused function 'dmadesc_get_addr'. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3401 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/20221209033723.32452-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-20net: bcmgenet: add RX_CLS_LOC_ANY supportDoug Berger1-4/+27
If a matching flow spec exists its current location is as good as ANY. If not add the new flow spec at the first available location. Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20221019215123.316997-1-opendmb@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28net: drop the weight argument from netif_napi_addJakub Kicinski1-2/+1
We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-31net: ethernet: move from strlcpy with unused retval to strscpyWolfram Sang1-1/+1
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # For drivers/net/ethernet/mellanox/mlxsw Acked-by: Geoff Levand <geoff@infradead.org> # For ps3_gelic_net and spider_net_ethtool Acked-by: Tom Lendacky <thomas.lendacky@amd.com> # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c Acked-by: Marcin Wojtas <mw@semihalf.com> # For drivers/net/ethernet/marvell/mvpp2 Reviewed-by: Leon Romanovsky <leonro@nvidia.com> # For drivers/net/ethernet/mellanox/mlx{4|5} Reviewed-by: Shay Agroskin <shayagr@amazon.com> # For drivers/net/ethernet/amazon/ena Acked-by: Krzysztof Hałasa <khalasa@piap.pl> # For IXP4xx Ethernet Link: https://lore.kernel.org/r/20220830201457.7984-3-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+4
No conflicts. Build issue in drivers/net/ethernet/sfc/ptp.c 54fccfdd7c66 ("sfc: efx_default_channel_type APIs can be static") 49e6123c65da ("net: sfc: fix memory leak due to ptp channel") https://lore.kernel.org/all/20220510130556.52598fe2@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-12net: bcmgenet: Check for Wake-on-LAN interrupt probe deferralFlorian Fainelli1-0/+4
The interrupt controller supplying the Wake-on-LAN interrupt line maybe modular on some platforms (irq-bcm7038-l1.c) and might be probed at a later time than the GENET driver. We need to specifically check for -EPROBE_DEFER and propagate that error to ensure that we eventually fetch the interrupt descriptor. Fixes: 9deb48b53e7f ("bcmgenet: add WOL IRQ check") Fixes: 5b1f0e62941b ("net: bcmgenet: Avoid touching non-existent interrupt") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/20220511031752.2245566-1-f.fainelli@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-05net: switch to netif_napi_add_tx()Jakub Kicinski1-2/+1
Switch net callers to the new API not requiring the NAPI_POLL_WEIGHT argument. Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org> Acked-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Acked-by: Alexandra Winter <wintera@linux.ibm.com> Link: https://lore.kernel.org/r/20220504163725.550782-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-26net: bcmgenet: hide status block before TX timestampingJonathan Lemon1-0/+7
The hardware checksum offloading requires use of a transmit status block inserted before the outgoing frame data, this was updated in '9a9ba2a4aaaa ("net: bcmgenet: always enable status blocks")' However, skb_tx_timestamp() assumes that it is passed a raw frame and PTP parsing chokes on this status block. Fix this by calling __skb_pull(), which hides the TSB before calling skb_tx_timestamp(), so an outgoing PTP packet is parsed correctly. As the data in the skb has already been set up for DMA, and the dma_unmap_* calls use a separately stored address, there is no no effective change in the data transmission. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220424165307.591145-1-jonathan.lemon@gmail.com Fixes: d03825fba459 ("net: bcmgenet: add skb_tx_timestamp call") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-14net: bcmgenet: Revert "Use stronger register read/writes to assure ordering"Jeremy Linton1-2/+2
It turns out after digging deeper into this bug, that it was being triggered by GCC12 failing to call the bcmgenet_enable_dma() routine. Given that a gcc12 fix has been merged [1] and the genet driver now works properly when built with gcc12, this commit should be reverted. [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105160 https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=aabb9a261ef060cf24fd626713f1d7d9df81aa57 Fixes: 8d3ea3d402db ("net: bcmgenet: Use stronger register read/writes to assure ordering") Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220412210420.1129430-1-jeremy.linton@arm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-2/+2
Merge in overtime fixes, no conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-21net: bcmgenet: Use stronger register read/writes to assure orderingJeremy Linton1-2/+2
GCC12 appears to be much smarter about its dependency tracking and is aware that the relaxed variants are just normal loads and stores and this is causing problems like: [ 210.074549] ------------[ cut here ]------------ [ 210.079223] NETDEV WATCHDOG: enabcm6e4ei0 (bcmgenet): transmit queue 1 timed out [ 210.086717] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:529 dev_watchdog+0x234/0x240 [ 210.095044] Modules linked in: genet(E) nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat] [ 210.146561] ACPI CPPC: PCC check channel failed for ss: 0. ret=-110 [ 210.146927] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G E 5.17.0-rc7G12+ #58 [ 210.153226] CPPC Cpufreq:cppc_scale_freq_workfn: failed to read perf counters [ 210.161349] Hardware name: Raspberry Pi Foundation Raspberry Pi 4 Model B/Raspberry Pi 4 Model B, BIOS EDK2-DEV 02/08/2022 [ 210.161353] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 210.161358] pc : dev_watchdog+0x234/0x240 [ 210.161364] lr : dev_watchdog+0x234/0x240 [ 210.161368] sp : ffff8000080a3a40 [ 210.161370] x29: ffff8000080a3a40 x28: ffffcd425af87000 x27: ffff8000080a3b20 [ 210.205150] x26: ffffcd425aa00000 x25: 0000000000000001 x24: ffffcd425af8ec08 [ 210.212321] x23: 0000000000000100 x22: ffffcd425af87000 x21: ffff55b142688000 [ 210.219491] x20: 0000000000000001 x19: ffff55b1426884c8 x18: ffffffffffffffff [ 210.226661] x17: 64656d6974203120 x16: 0000000000000001 x15: 6d736e617274203a [ 210.233831] x14: 2974656e65676d63 x13: ffffcd4259c300d8 x12: ffffcd425b07d5f0 [ 210.241001] x11: 00000000ffffffff x10: ffffcd425b07d5f0 x9 : ffffcd4258bdad9c [ 210.248171] x8 : 00000000ffffdfff x7 : 000000000000003f x6 : 0000000000000000 [ 210.255341] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000001000 [ 210.262511] x2 : 0000000000001000 x1 : 0000000000000005 x0 : 0000000000000044 [ 210.269682] Call trace: [ 210.272133] dev_watchdog+0x234/0x240 [ 210.275811] call_timer_fn+0x3c/0x15c [ 210.279489] __run_timers.part.0+0x288/0x310 [ 210.283777] run_timer_softirq+0x48/0x80 [ 210.287716] __do_softirq+0x128/0x360 [ 210.291392] __irq_exit_rcu+0x138/0x140 [ 210.295243] irq_exit_rcu+0x1c/0x30 [ 210.298745] el1_interrupt+0x38/0x54 [ 210.302334] el1h_64_irq_handler+0x18/0x24 [ 210.306445] el1h_64_irq+0x7c/0x80 [ 210.309857] arch_cpu_idle+0x18/0x2c [ 210.313445] default_idle_call+0x4c/0x140 [ 210.317470] cpuidle_idle_call+0x14c/0x1a0 [ 210.321584] do_idle+0xb0/0x100 [ 210.324737] cpu_startup_entry+0x30/0x8c [ 210.328675] secondary_start_kernel+0xe4/0x110 [ 210.333138] __secondary_switched+0x94/0x98 The assumption when these were relaxed seems to be that device memory would be mapped non reordering, and that other constructs (spinlocks/etc) would provide the barriers to assure that packet data and in memory rings/queues were ordered with respect to device register reads/writes. This itself seems a bit sketchy, but the real problem with GCC12 is that it is moving the actual reads/writes around at will as though they were independent operations when in truth they are not, but the compiler can't know that. When looking at the assembly dumps for many of these routines its possible to see very clean, but not strictly in program order operations occurring as the compiler would be free to do if these weren't actually register reads/write operations. Its possible to suppress the timeout with a liberal bit of dma_mb()'s sprinkled around but the device still seems unable to reliably send/receive data. A better plan is to use the safer readl/writel everywhere. Since this partially reverts an older commit, which notes the use of the relaxed variants for performance reasons. I would suggest that any performance problems with this commit are targeted at relaxing only the performance critical code paths after assuring proper barriers. Fixes: 69d2ea9c79898 ("net: bcmgenet: Use correct I/O accessors") Reported-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Acked-by: Peter Robinson <pbrobinson@gmail.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220310045358.224350-1-jeremy.linton@arm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-2/+4
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-17net: bcmgenet: skip invalid partial checksumsDoug Berger1-2/+4
The RXCHK block will return a partial checksum of 0 if it encounters a problem while receiving a packet. Since a 1's complement sum can only produce this result if no bits are set in the received data stream it is fair to treat it as an invalid partial checksum and not pass it up the stack. Fixes: 810155397890 ("net: bcmgenet: use CHECKSUM_COMPLETE for NETIF_F_RXCSUM") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220317012812.1313196-1-opendmb@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-24net: use bool values to pass bool param of phy_init_eee()Jisheng Zhang1-1/+1
The 2nd param of phy_init_eee(): clk_stop_enable is a bool param, use true or false instead of 1/0. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220123152241.1480-1-jszhang@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-14bcmgenet: add WOL IRQ checkSergey Shtylyov1-4/+6
The driver neglects to check the result of platform_get_irq_optional()'s call and blithely passes the negative error codes to devm_request_irq() (which takes *unsigned* IRQ #), causing it to fail with -EINVAL. Stop calling devm_request_irq() with the invalid IRQ #s. Fixes: 8562056f267d ("net: bcmgenet: request Wake-on-LAN interrupt") Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: bcmgenet: Add support for 7712 16nm internal EPHYFlorian Fainelli1-2/+11
The 16nm internal EPHY that is present in 7712 is actually a 16nm Gigabit PHY which has been forced to operate in 10/100 mode. Its controls are therefore via the EXT_GPHY_CTRL registers and not via the EXT_EPHY_CTRL which are used for all GENETv5 adapters. Add a match on the 7712 compatible string to allow that differentiation to happen. On previous GENETv4 chips the EXT_CFG_IDDQ_GLOBAL_PWR bit was cleared by default, but this is not the case with this chip, so we need to make sure we clear it to power on the EPHY. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-16ethernet: bcmgenet: use eth_hw_addr_set()Jakub Kicinski1-2/+6
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Read the address into an array on the stack, then call eth_hw_addr_set(). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-14ethernet: constify references to netdev->dev_addr in driversJakub Kicinski1-2/+2
This big patch sprinkles const on local variables and function arguments which may refer to netdev->dev_addr. Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Some of the changes here are not strictly required - const is sometimes cast off but pointer is not used for writing. It seems like it's still better to add the const in case the code changes later or relevant -W flags get enabled for the build. No functional changes. Link: https://lore.kernel.org/r/20211014142432.449314-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-07ethernet: use device_get_ethdev_address()Jakub Kicinski1-1/+1
Use the new device_get_ethdev_address() helper for the cases where dev->dev_addr is passed in directly as the destination. @@ expression dev, np; @@ - device_get_mac_address(np, dev->dev_addr, ETH_ALEN) + device_get_ethdev_address(np, dev) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-07eth: fwnode: remove the addr len from mac helpersJakub Kicinski1-1/+1
All callers pass in ETH_ALEN and the function itself will return -EINVAL for any other address length. Just assume it's ETH_ALEN like all other mac address helpers (nvm, of, platform). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-07eth: fwnode: change the return type of mac address helpersJakub Kicinski1-1/+1
fwnode_get_mac_address() and device_get_mac_address() return a pointer to the buffer that was passed to them on success or NULL on failure. None of the callers care about the actual value, only if it's NULL or not. These semantics differ from of_get_mac_address() which returns an int so to avoid confusion make the device helpers return an errno. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ethernet: use eth_hw_addr_set() instead of ether_addr_copy()Jakub Kicinski1-2/+2
Convert Ethernet from ether_addr_copy() to eth_hw_addr_set(): @@ expression dev, np; @@ - ether_addr_copy(dev->dev_addr, np) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-27net: bcmgenet: add support for ethtool flow controlDoug Berger1-0/+51
This commit extends the supported ethtool operations to allow MAC level flow control to be configured for the bcmgenet driver. The ethtool utility can be used to change the configuration of auto-negotiated symmetric and asymmetric modes as well as manually configuring support for RX and TX Pause frames individually. Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-27net: bcmgenet: remove old link state valuesDoug Berger1-5/+0
The PHY state machine has been fixed to only call the adjust_link callback when the link state has changed. Therefore the old link state variables are no longer needed to detect a change in link state. This commit effectively reverts commit 5ad6e6c50899 ("net: bcmgenet: improve bcmgenet_mii_setup()") Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24ethtool: extend coalesce setting uAPI with CQE modeYufeng Mo1-2/+6
In order to support more coalesce parameters through netlink, add two new parameter kernel_coal and extack for .set_coalesce and .get_coalesce, then some extra info can return to user with the netlink API. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-03bcmgenet: remove call to netdev_boot_setup_checkArnd Bergmann1-2/+0
The driver has never used the netdev->{irq,base_addr,mem_start} members, so this call is completely unnecessary. Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27dev_ioctl: split out ndo_eth_ioctlArnd Bergmann1-1/+1
Most users of ndo_do_ioctl are ethernet drivers that implement the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP. Separate these from the few drivers that use ndo_do_ioctl to implement SIOCBOND, SIOCBR and SIOCWANDEV commands. This is a purely cosmetic change intended to help readers find their way through the implementation. Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: linux-rdma@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-08net: bcmgenet: Ensure all TX/RX queues DMAs are disabledFlorian Fainelli1-0/+6
Make sure that we disable each of the TX and RX queues in the TDMA and RDMA control registers. This is a correctness change to be symmetrical with the code that enables the TX and RX queues. Tested-by: Maxime Ripard <maxime@cerno.tech> Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-01net: bcmgenet: ensure EXT_ENERGY_DET_MASK is clearDoug Berger1-15/+2
Setting the EXT_ENERGY_DET_MASK bit allows the port energy detection logic of the internal PHY to prevent the system from sleeping. Some internal PHYs will report that energy is detected when the network interface is closed which can prevent the system from going to sleep if WoL is enabled when the interface is brought down. Since the driver does not support waking the system on this logic, this commit clears the bit whenever the internal PHY is powered up and the other logic for manipulating the bit is removed since it serves no useful function. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24net: bcmgenet: Add mdio-bcm-unimac soft dependencyJian-Hong Pan1-0/+1
The Broadcom UniMAC MDIO bus from mdio-bcm-unimac module comes too late. So, GENET cannot find the ethernet PHY on UniMAC MDIO bus. This leads GENET fail to attach the PHY as following log: bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 ... could not attach to PHY bcmgenet fd580000.ethernet eth0: failed to connect to PHY uart-pl011 fe201000.serial: no DMA platform data libphy: bcmgenet MII bus: probed ... unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus It is not just coming too late, there is also no way for the module loader to figure out the dependency between GENET and its MDIO bus driver unless we provide this MODULE_SOFTDEP hint. This patch adds the soft dependency to load mdio-bcm-unimac module before genet module to fix this issue. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=213485 Fixes: 9a4e79697009 ("net: bcmgenet: utilize generic Broadcom UniMAC MDIO controller driver") Signed-off-by: Jian-Hong Pan <jhp@endlessos.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-16net: bcmgenet: Fix a resource leak in an error handling path in the probe ↵Christophe JAILLET1-1/+3
functin If the 'register_netdev()' call fails, we must undo a previous 'bcmgenet_mii_init()' call. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20201212182005.120437-1-christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds1-1/+1
Pull networking fixes from David Miller: 1) Use netif_rx_ni() when necessary in batman-adv stack, from Jussi Kivilinna. 2) Fix loss of RTT samples in rxrpc, from David Howells. 3) Memory leak in hns_nic_dev_probe(), from Dignhao Liu. 4) ravb module cannot be unloaded, fix from Yuusuke Ashizuka. 5) We disable BH for too lokng in sctp_get_port_local(), add a cond_resched() here as well, from Xin Long. 6) Fix memory leak in st95hf_in_send_cmd, from Dinghao Liu. 7) Out of bound access in bpf_raw_tp_link_fill_link_info(), from Yonghong Song. 8) Missing of_node_put() in mt7530 DSA driver, from Sumera Priyadarsini. 9) Fix crash in bnxt_fw_reset_task(), from Michael Chan. 10) Fix geneve tunnel checksumming bug in hns3, from Yi Li. 11) Memory leak in rxkad_verify_response, from Dinghao Liu. 12) In tipc, don't use smp_processor_id() in preemptible context. From Tuong Lien. 13) Fix signedness issue in mlx4 memory allocation, from Shung-Hsi Yu. 14) Missing clk_disable_prepare() in gemini driver, from Dan Carpenter. 15) Fix ABI mismatch between driver and firmware in nfp, from Louis Peens. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (110 commits) net/smc: fix sock refcounting in case of termination net/smc: reset sndbuf_desc if freed net/smc: set rx_off for SMCR explicitly net/smc: fix toleration of fake add_link messages tg3: Fix soft lockup when tg3_reset_task() fails. doc: net: dsa: Fix typo in config code sample net: dp83867: Fix WoL SecureOn password nfp: flower: fix ABI mismatch between driver and firmware tipc: fix shutdown() of connectionless socket ipv6: Fix sysctl max for fib_multipath_hash_policy drivers/net/wan/hdlc: Change the default of hard_header_len to 0 net: gemini: Fix another missing clk_disable_unprepare() in probe net: bcmgenet: fix mask check in bcmgenet_validate_flow() amd-xgbe: Add support for new port mode net: usb: dm9601: Add USB ID of Keenetic Plus DSL vhost: fix typo in error message net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init() pktgen: fix error message with wrong function name net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link mode cxgb4: fix thermal zone device registration ...
2020-09-02net: bcmgenet: fix mask check in bcmgenet_validate_flow()Denis Efremov1-1/+1
VALIDATE_MASK(eth_mask->h_source) is checked twice in a row in bcmgenet_validate_flow(). Add VALIDATE_MASK(eth_mask->h_dest) instead. Fixes: 3e370952287c ("net: bcmgenet: add support for ethtool rxnfc flows") Signed-off-by: Denis Efremov <efremov@linux.com> Acked-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-2/+2
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-07-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-79/+65
The UDP reuseport conflict was a little bit tricky. The net-next code, via bpf-next, extracted the reuseport handling into a helper so that the BPF sk lookup code could invoke it. At the same time, the logic for reuseport handling of unconnected sockets changed via commit efc6b6f6c3113e8b203b9debfb72d81e0f3dcace which changed the logic to carry on the reuseport result into the rest of the lookup loop if we do not return immediately. This requires moving the reuseport_has_conns() logic into the callers. While we are here, get rid of inline directives as they do not belong in foo.c files. The other changes were cases of more straightforward overlapping modifications. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: bcmgenet: add missed clk_disable_unprepare in bcmgenet_probeZhang Changzhong1-2/+2
The driver forgets to call clk_disable_unprepare() in error path after a success calling for clk_prepare_enable(). Fix to goto err_clk_disable if clk_prepare_enable() is successful. Fixes: c80d36ff63a5 ("net: bcmgenet: Use devm_clk_get_optional() to get the clocks") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: bcmgenet: fix error returns in bcmgenet_probe()Zhang Changzhong1-1/+1
The driver forgets to call clk_disable_unprepare() in error path after a success calling for clk_prepare_enable(). Fix to goto err_clk_disable if clk_prepare_enable() is successful. Fixes: 99d55638d4b0 ("net: bcmgenet: enable NETIF_F_HIGHDMA flag") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-17net: bcmgenet: restore HFB filters on resumeDoug Berger1-76/+62
The Hardware Filter Block RAM may not be preserved when the GENET block is reset during a deep sleep, so it is not sufficient to only backup and restore the enables. This commit clears out the HFB block and reprograms the rxnfc rules when the system resumes from a suspended state. To support this the bcmgenet_hfb_create_rxnfc_filter() function is modified to access the register space directly so that it can't fail due to memory allocation issues. Fixes: f50932cca632 ("net: bcmgenet: add WAKE_FILTER support") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-03net: bcmgenet: Allow changing carrier from user-spaceFlorian Fainelli1-0/+17
The GENET driver interfaces with internal MoCA interface as well as external MoCA chips like the BCM6802/6803 through a fixed link interface. It is desirable for the mocad user-space daemon to be able to control the carrier state based upon out of band messages that it receives from the MoCA chip. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-24net: bcmgenet: use hardware padding of runt framesDoug Berger1-5/+3
When commit 474ea9cafc45 ("net: bcmgenet: correctly pad short packets") added the call to skb_padto() it should have been located before the nr_frags parameter was read since that value could be changed when padding packets with lengths between 55 and 59 bytes (inclusive). The use of a stale nr_frags value can cause corruption of the pad data when tx-scatter-gather is enabled. This corruption of the pad can cause invalid checksum computation when hardware offload of tx-checksum is also enabled. Since the original reason for the padding was corrected by commit 7dd399130efb ("net: bcmgenet: fix skb_len in bcmgenet_xmit_single()") we can remove the software padding all together and make use of hardware padding of short frames as long as the hardware also always appends the FCS value to the frame. Fixes: 474ea9cafc45 ("net: bcmgenet: correctly pad short packets") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-24net: bcmgenet: use __be16 for htons(ETH_P_IP)Doug Berger1-1/+2
The 16-bit value that holds a short in network byte order should be declared as a restricted big endian type to allow type checks to succeed during assignment. Fixes: 3e370952287c ("net: bcmgenet: add support for ethtool rxnfc flows") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-24net: bcmgenet: re-remove bcmgenet_hfb_add_filterDoug Berger1-77/+0
This function was originally removed by Baoyou Xie in commit e2072600a241 ("net: bcmgenet: remove unused function in bcmgenet.c") to prevent a build warning. Some of the functions removed by Baoyou Xie are now used for WAKE_FILTER support so his commit was reverted, but this function is still unused and the kbuild test robot dutifully reported the warning. This commit once again removes the remaining unused hfb functions. Fixes: 14da1510fedc ("Revert "net: bcmgenet: remove unused function in bcmgenet.c"") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01net: bcmgenet: Move wake-up event out of side band ISRDoug Berger1-13/+59
The side band interrupt service routine is not available on chips like 7211, or rather, it does not permit the signaling of wake-up events due to the complex interrupt hierarchy. Move the wake-up event accounting into a .resume_noirq function, account for possible wake-up events and clear the MPD/HFB interrupts from there, while leaving the hardware untouched until the resume function proceeds with doing its usual business. Because bcmgenet_wol_power_down_cfg() now enables the MPD and HFB interrupts, it is invoked by a .suspend_noirq function to prevent the servicing of interrupts after the clocks have been disabled. Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-25 02:41:04 +0000