summaryrefslogtreecommitdiff
path: root/drivers/mtd/nand/diskonchip.c
AgeCommit message (Collapse)AuthorFilesLines
2018-02-16mtd: nand: move raw NAND related code to the raw/ subdirBoris Brezillon1-1709/+0
As part of the process of sharing more code between different NAND based devices, we need to move all raw NAND related code to the raw/ subdirectory. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-02-16mtd: nand: Get rid of comments giving the file path inside the file itselfBoris Brezillon1-2/+0
Some files add a comment giving the path of the file inside the Linux tree, which is pretty useless since the reader had to find the file to open it. Getting rid of these comments will also allow us to easily move these files around when needed. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2017-12-14mtd: nand: provide several helpers to do common NAND operationsBoris Brezillon1-2/+2
This is part of the process of removing direct calls to ->cmdfunc() outside of the core in order to introduce a better interface to execute NAND operations. Here we provide several helpers and make use of them to remove all direct calls to ->cmdfunc(). This way, we can easily modify those helpers to make use of the new ->exec_op() interface when available. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [miquel.raynal@free-electrons.com: rebased and fixed some conflicts] Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-18mtd: nand: introduce NAND_ROW_ADDR_3 flagMasahiro Yamada1-2/+1
Several drivers check ->chipsize to see if the third row address cycle is needed. Instead of embedding magic sizes such as 32MB, 128MB in drivers, introduce a new flag NAND_ROW_ADDR_3 for clean-up. Since nand_scan_ident() knows well about the device, it can handle this properly. The flag is set if the row address bit width is greater than 16. Delete comments such as "One more address cycle for ..." because intention is now clear enough from the code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Wenyou Yang <wenyou.yang@microchip.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-08-13mtd: nand: Rename nand.h into rawnand.hBoris Brezillon1-1/+1
We are planning to share more code between different NAND based devices (SPI NAND, OneNAND and raw NANDs), but before doing that we need to move the existing include/linux/mtd/nand.h file into include/linux/mtd/rawnand.h so we can later create a nand.h header containing all common structure and function prototypes. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Peter Pan <peterpandong@micron.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Acked-by: Wenyou Yang <wenyou.yang@microchip.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Han Xu <han.xu@nxp.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-By: Harvey Hunt <harveyhuntnexus@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Krzysztof Halasa <khalasa@piap.pl>
2016-05-05mtd: nand: diskonchip: switch to mtd_ooblayout_opsBoris Brezillon1-15/+45
Implementing the mtd_ooblayout_ops interface is the new way of exposing ECC/OOB layout to MTD users. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-03-10mtd: nand: don't select chip in nand_chip's block_bad opArchit Taneja1-1/+1
One of the arguments passed to struct nand_chip's block_bad op is 'getchip', which, if true, is supposed to get and select the nand device, and later unselect and release the device. This op is intended to be replaceable by drivers. The drivers shouldn't be responsible for selecting/unselecting chip. Like other ops, the chip should already be selected before the block_bad op is called. Remove the getchip argument from the block_bad op and nand_block_checkbad. Move the chip selection to nand_block_isbad, since it is the only caller to nand_block_checkbad which requires chip selection. Modify nand_block_bad (the default function for the op) such that it doesn't select the chip. Remove the getchip argument from the bad_block funcs in cafe_nand, diskonchip and docg4 drivers. Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-01-07mtd: nand: make use of nand_set/get_controller_data() helpersBoris BREZILLON1-35/+35
New helpers have been added to avoid directly accessing chip->field. Use them where appropriate. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [Brian: fixed a few rebase conflicts] Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-01-06mtd: nand: diskonchip: remove custom 'erased check' implementationBoris BREZILLON1-35/+3
The diskonchip driver is manually checking for 'erased pages' while correcting ECC bytes. This logic can now done by the core infrastructure, and can thus be removed from this driver. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-12-18mtd: nand: remove useless mtd->priv = chip assignmentsBoris BREZILLON1-1/+0
mtd_to_nand() now uses the container_of() approach to transform an mtd_info pointer into a nand_chip one. Drop useless mtd->priv assignments from NAND controller drivers. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-12-18mtd: nand: diskonchip: use the mtd instance embedded in struct nand_chipBoris BREZILLON1-7/+7
struct nand_chip now embeds an mtd device. Make use of this mtd instance. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-12-08mtd: nand: make use of mtd_to_nand() in NAND driversBoris BREZILLON1-33/+33
mtd_to_nand() was recently introduced to avoid direct accesses to the mtd->priv field. Update all NAND drivers to use it. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-08-10arch, drivers: don't include <asm/io.h> directly, use <linux/io.h> insteadDan Williams1-1/+1
Preparation for uniform definition of ioremap, ioremap_wc, ioremap_wt, and ioremap_cache, tree-wide. Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-06-16mtd: diskonchip: remove two-phase partitioning / registrationBrian Norris1-8/+2
It is a Bad Idea (TM) to call mtd_device_register() or mtd_device_parse_register() twice on the same master MTD. Among other things, it makes partition overrides (e.g., cmdlinepart) much more difficult. Since commit 727dc612c46b ("mtd: part: Create the master device node when partitioned"), we now have a config option that accomplishes the same purpose as the double-registration done in diskonchip.c -- it forces the master MTD to *always* be registered, while partitions may optionally show up in addition. Eventually, we might like to make CONFIG_MTD_PARTITIONED_MASTER into the default, but this could be disruptive to user-space expectations of MTD numbering, so we'll take that slowly. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: Alexander Shiyan <shc_work@mail.ru>
2015-05-06mtd: diskonchip: don't call nand_scan_bbt() directlyBrian Norris1-11/+16
The diskonchip driver almost uses the default nand_base hooks as-is, except that it provides custom on-flash BBT descriptors and avoids using factory-marked bad blockers. So let's refactor the BBT initialization code into a private 'late_init' hook which handles all the private details. Note the usage of NAND_SKIP_BBTSCAN, which allows us to defer the BBT scan until we've prepared everything. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-03-31mtd: diskonchip: mem resource name is not optionalSasha Levin1-1/+1
Passing a name to request_mem_region() isn't optional and can't just be NULL. Passing NULL causes a NULL ptr deref later in the boot process. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Alexander Shiyan <shc_work@mail.ru> Cc: <stable@vger.kernel.org> # 3.14 Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-03-10mtd: nand: force NAND_CMD_READID onto 8-bit busBrian Norris1-1/+2
The NAND command helpers tend to automatically shift the column address for x16 bus devices, since most commands expect a word address, not a byte address. The Read ID command, however, expects an 8-bit address (i.e., 0x00, 0x20, or 0x40 should not be translated to 0x00, 0x10, or 0x20). This fixes the column address for a few drivers which imitate the nand_base defaults. Note that I don't touch sh_flctl.c, since it already handles this problem slightly differently (note its comment "READID is always performed using an 8-bit bus"). I have not tested this patch, as I only have x8 parts up for testing at this point. Hopefully that can change soon... Signed-off-by: Brian Norris <computersforpeace@gmail.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Tested-By: Pekon Gupta <pekon@ti.com>
2014-01-03mtd: diskonchip: Remove unnecessary OOM messagesJingoo Han1-3/+0
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: nand: diskonchip: Request memory region prior ioremap()Alexander Shiyan1-1/+9
This patch adds request_mem_region() prior ioremap() for diskonchip driver. This will allow to check if memory region is occupied by any other device, for example in case if we have memory region for several optional devices and only one device can be used at once. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-10-27mtd: diskonchip: Fix incorrect placement of __initdataSachin Kamat1-1/+1
__initdata should be placed between the variable name and equal sign for the variable to be placed in the intended section. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-08-05mtd: diskonchip: remove unused entries in KconfigMichael Opdenacker1-2/+2
This patch proposes to remove kernel configuration parameters defined in drivers/mtd/devices/Kconfig, but used nowhere in the makefiles and source code (except in comments). Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-11-16mtd: diskonchip: don't warn about ARM architectureArnd Bergmann1-2/+0
Enabling the diskonchip drivers on most architectures results in a pointless warning "#warning Unknown architecture for DiskOnChip. No default probe locations defined". The driver can in fact handle the default location already through the CONFIG_MTD_DOCPROBE_ADDRESS, which gets set on the platforms that need it, and we get a run-time error if this is not set correctly. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-29mtd: kill MTD_NAND_VERIFY_WRITEHuang Shijie1-63/+0
Just as Artem suggested: "Both UBI and JFFS2 are able to read verify what they wrote already. There are also MTD tests which do this verification. So I think there is no reason to keep this in the NAND layer, let alone wasting RAM in the driver to support this feature. Besides, it does not work for sub-pages and many drivers have it broken. It hurts more than it provides benefits." So kill MTD_NAND_VERIFY_WRITE entirely. Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-03-27mtd: flash drivers set ecc strengthMike Dunn1-0/+1
Flash device drivers initialize 'ecc_strength' in struct mtd_info, which is the maximum number of bit errors that can be corrected in one writesize region. Drivers using the nand interface intitialize 'strength' in struct nand_ecc_ctrl, which is the maximum number of bit errors that can be corrected in one ecc step. Nand infrastructure code translates this to 'ecc_strength'. Also for nand drivers, the nand infrastructure code sets ecc.strength for ecc modes NAND_ECC_SOFT, NAND_ECC_SOFT_BCH, and NAND_ECC_NONE. It is set in the driver for all other modes. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_read interfaceArtem Bityutskiy1-2/+2
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-11-07Merge git://git.infradead.org/mtd-2.6Linus Torvalds1-4/+4
* git://git.infradead.org/mtd-2.6: (226 commits) mtd: tests: annotate as DANGEROUS in Kconfig mtd: tests: don't use mtd0 as a default mtd: clean up usage of MTD_DOCPROBE_ADDRESS jffs2: add compr=lzo and compr=zlib options jffs2: implement mount option parsing and compression overriding mtd: nand: initialize ops.mode mtd: provide an alias for the redboot module name mtd: m25p80: don't probe device which has status of 'disabled' mtd: nand_h1900 never worked mtd: Add DiskOnChip G3 support mtd: m25p80: add EON flash EN25Q32B into spi flash id table mtd: mark block device queue as non-rotational mtd: r852: make r852_pm_ops static mtd: m25p80: add support for at25df321a spi data flash mtd: mxc_nand: preset_v1_v2: unlock all NAND flash blocks mtd: nand: switch `check_pattern()' to standard `memcmp()' mtd: nand: invalidate cache on unaligned reads mtd: nand: do not scan bad blocks with NAND_BBT_NO_OOB set mtd: nand: wait to set BBT version mtd: nand: scrub BBT on ECC errors ... Fix up trivial conflicts: - arch/arm/mach-at91/board-usb-a9260.c Merged into board-usb-a926x.c - drivers/mtd/maps/lantiq-flash.c add_mtd_partitions -> mtd_device_register vs changed to use mtd_device_parse_register.
2011-10-31mtd: Add module.h to drivers users that were implicitly using it.Paul Gortmaker1-0/+1
We are cleaning up the implicit presence of module.h that these drivers are taking advantage of. Fix them in advance of the cleanup operation. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-21mtd: utilize `mtd_is_*()' functionsBrian Norris1-1/+1
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: spelling, capitalization, uniformityBrian Norris1-2/+2
Therefor -> Therefore [Intern], [Internal] -> [INTERN] [REPLACABLE] -> [REPLACEABLE] syndrom, syndom -> syndrome ecc -> ECC buswith -> buswidth endianess -> endianness dont -> don't occures -> occurs independend -> independent wihin -> within erease -> erase blockes -> blocks ... Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-09-11mtd: nand: rename NAND_USE_FLASH_BBTBrian Norris1-1/+1
Recall the recently added prefix requirements: * "NAND_" for flags in nand.h, used in nand_chip.options * "NAND_BBT_" for flags in bbm.h, used in nand_chip.bbt_options or in nand_bbt_descr.options Thus, I am changing NAND_USE_FLASH_BBT to NAND_BBT_USE_FLASH. Again, this flag is found in bbm.h and so should NOT be used in the "nand_chip.options" field. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-09-11mtd: nand: consolidate redundant flash-based BBT flagsBrian Norris1-1/+1
This patch works with the following three flags from two headers (nand.h and bbm.h): (1) NAND_USE_FLASH_BBT (nand.h) (2) NAND_USE_FLASH_BBT_NO_OOB (nand.h) (3) NAND_BBT_NO_OOB (bbm.h) These flags are all related and interdependent, yet they were in different headers. Flag (2) is simply the combination of (1) and (3) and can be eliminated. This patch accomplishes the following: * eliminate NAND_USE_FLASH_BBT_NO_OOB (i.e., flag (2)) * move NAND_USE_FLASH_BBT (i.e., flag (1)) to bbm.h It's important to note that because (1) and (3) are now both found in bbm.h, they should NOT be used in the "nand_chip.options" field. I removed a small section from the mtdnand DocBook because it referes to NAND_USE_FLASH_BBT in nand.h, which has been moved to bbm.h. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-25mtd: diskonchip: convert to mtd_device_register()Jamie Iles1-11/+7
Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-04-26Revert wrong fixes for common misspellingsLucas De Marchi1-1/+1
These changes were incorrectly fixed by codespell. They were now manually corrected. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31Fix common misspellingsLucas De Marchi1-4/+4
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2010-08-08mtd: Remove obsolete <mtd/compatmac.h> includeDavid Woodhouse1-1/+0
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-04mtd: doc2000: fix uninitialized variable in doc_ecc_decode()Mark Ware1-2/+3
The variable 'syn' was being used uninitialized. Also fixed incorrect use of syn[] vs s[]. Tested on powerpc board with 64MiB DOC2000. Signed-off-by: Mark Ware <mware@elphinstone.net> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-0/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2009-12-04tree-wide: fix assorted typos all over the placeAndré Goddard Rosa1-1/+1
That is "success", "unknown", "through", "performance", "[re|un]mapping" , "access", "default", "reasonable", "[con]currently", "temperature" , "channel", "[un]used", "application", "example","hierarchy", "therefore" , "[over|under]flow", "contiguous", "threshold", "enough" and others. Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-30trivial: MTD: remove EOL from MODULE_DESCRIPTIONNiels de Vos1-1/+1
There is no need to have a "\n" on a MODULE_DESCRIPTION, remove it. Signed-off-by: Niels de Vos <niels.devos@wincor-nixdorf.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-08-01[MTD] [NAND] diskonchip.c fix sparse endian warningsHarvey Harrison1-15/+15
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-11[MTD] [NAND] remove __PPC__ hardcoded address from DiskOnChip driversMilton Miller1-2/+0
Such a hardcoded address can cause a checkstop or machine check if the driver is in the kernel but the address is not acknowledged. Both drivers allow an address to be specified as either a module parameter or config option. Any future powerpc board should either use one of these methods or find the address in the device tree. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-06-04MTD/JFFS2: remove CVS keywordsAdrian Bunk1-2/+0
Once upon a time, the MTD repository was using CVS. This patch therefore removes all usages of the no longer updated CVS keywords from the MTD code. This also includes code that printed them to the user. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-20[MTD] [NAND] Replace -1 with -EBADMSG in nand error correction codeJörn Engel1-2/+2
Magic numerical values are just bad style. Particularly so when undocumented. Signed-off-by: Jörn Engel <joern@logfs.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-08-01Merge branch 'master' of ↵David Woodhouse1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
2007-07-31[MIPS] Remove Momentum Ocelot support.Ralf Baechle1-3/+0
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-11[MTD] Remove Ocelot G support from DiskOnChip drivers.Yoichi Yuasa1-2/+0
This patch has removed Ocelot G support from MTD. Ocelot G support has already removed since May 2007. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-07-10[MIPS] Remove Momenco Ocelot C supportFranck Bui-Huu1-1/+1
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> delete mode 100644 arch/mips/configs/ocelot_c_defconfig delete mode 100644 arch/mips/momentum/ocelot_c/Makefile delete mode 100644 arch/mips/momentum/ocelot_c/cpci-irq.c delete mode 100644 arch/mips/momentum/ocelot_c/dbg_io.c delete mode 100644 arch/mips/momentum/ocelot_c/irq.c delete mode 100644 arch/mips/momentum/ocelot_c/ocelot_c_fpga.h delete mode 100644 arch/mips/momentum/ocelot_c/platform.c delete mode 100644 arch/mips/momentum/ocelot_c/prom.c delete mode 100644 arch/mips/momentum/ocelot_c/reset.c delete mode 100644 arch/mips/momentum/ocelot_c/setup.c delete mode 100644 arch/mips/momentum/ocelot_c/uart-irq.c delete mode 100644 arch/mips/pci/fixup-ocelot-c.c delete mode 100644 arch/mips/pci/pci-ocelot-c.c
2007-03-08[MTD] [NAND] Correct misspelled preprocessor variable.Robert P. J. Day1-1/+1
Replace the apparently misspelled preprocessor variable "MTD_NAND_DISKONCHIP_BBTWRITE" with the correct form "CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE". Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-11-28[MTD] replace kmalloc+memset with kzallocBurman Yan1-2/+1
Signed-off-by: Yan Burman <yan_952@hotmail.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-06-20[MTD] NAND: Fix breakage all over the placeThomas Gleixner1-1/+1
Following problems are addressed: - wrong status caused early break out of nand_wait() - removed the bogus status check in nand_wait() which is a relict of the abandoned support for interrupted erase. - status check moved to the correct place in read_oob - oob support for syndrom based ecc with strange layouts - use given offset in the AUTOOOB based oob operations Partially based on a patch from Vitaly Vool <vwool@ru.mvista.com> Thanks to Savin Zlobec <savin@epico.si> for tracking down the status problem. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-03 23:11:10 +0000