Age | Commit message (Collapse) | Author | Files | Lines |
|
When creating ceq_0 during probing irdma, cqp.sc_cqp will be sent as a
cqp_request to cqp->sc_cqp.sq_ring. If the request is pending when
removing the irdma driver or unplugging its aux device, cqp.sc_cqp will be
dereferenced as wrong struct in irdma_free_pending_cqp_request().
PID: 3669 TASK: ffff88aef892c000 CPU: 28 COMMAND: "kworker/28:0"
#0 [fffffe0000549e38] crash_nmi_callback at ffffffff810e3a34
#1 [fffffe0000549e40] nmi_handle at ffffffff810788b2
#2 [fffffe0000549ea0] default_do_nmi at ffffffff8107938f
#3 [fffffe0000549eb8] do_nmi at ffffffff81079582
#4 [fffffe0000549ef0] end_repeat_nmi at ffffffff82e016b4
[exception RIP: native_queued_spin_lock_slowpath+1291]
RIP: ffffffff8127e72b RSP: ffff88aa841ef778 RFLAGS: 00000046
RAX: 0000000000000000 RBX: ffff88b01f849700 RCX: ffffffff8127e47e
RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff83857ec0
RBP: ffff88afe3e4efc8 R8: ffffed15fc7c9dfa R9: ffffed15fc7c9dfa
R10: 0000000000000001 R11: ffffed15fc7c9df9 R12: 0000000000740000
R13: ffff88b01f849708 R14: 0000000000000003 R15: ffffed1603f092e1
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000
-- <NMI exception stack> --
#5 [ffff88aa841ef778] native_queued_spin_lock_slowpath at ffffffff8127e72b
#6 [ffff88aa841ef7b0] _raw_spin_lock_irqsave at ffffffff82c22aa4
#7 [ffff88aa841ef7c8] __wake_up_common_lock at ffffffff81257363
#8 [ffff88aa841ef888] irdma_free_pending_cqp_request at ffffffffa0ba12cc [irdma]
#9 [ffff88aa841ef958] irdma_cleanup_pending_cqp_op at ffffffffa0ba1469 [irdma]
#10 [ffff88aa841ef9c0] irdma_ctrl_deinit_hw at ffffffffa0b2989f [irdma]
#11 [ffff88aa841efa28] irdma_remove at ffffffffa0b252df [irdma]
#12 [ffff88aa841efae8] auxiliary_bus_remove at ffffffff8219afdb
#13 [ffff88aa841efb00] device_release_driver_internal at ffffffff821882e6
#14 [ffff88aa841efb38] bus_remove_device at ffffffff82184278
#15 [ffff88aa841efb88] device_del at ffffffff82179d23
#16 [ffff88aa841efc48] ice_unplug_aux_dev at ffffffffa0eb1c14 [ice]
#17 [ffff88aa841efc68] ice_service_task at ffffffffa0d88201 [ice]
#18 [ffff88aa841efde8] process_one_work at ffffffff811c589a
#19 [ffff88aa841efe60] worker_thread at ffffffff811c71ff
#20 [ffff88aa841eff10] kthread at ffffffff811d87a0
#21 [ffff88aa841eff50] ret_from_fork at ffffffff82e0022f
Fixes: 44d9e52977a1 ("RDMA/irdma: Implement device initialization definitions")
Link: https://lore.kernel.org/r/20231130081415.891006-1-lishifeng@sangfor.com.cn
Suggested-by: "Ismail, Mustafa" <mustafa.ismail@intel.com>
Signed-off-by: Shifeng Li <lishifeng@sangfor.com.cn>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Virtual QP and CQ require a 4K HW page size but the driver passes
PAGE_SIZE to ib_umem_find_best_pgsz() instead.
Fix this by using the appropriate 4k value in the bitmap passed to
ib_umem_find_best_pgsz().
Fixes: 693a5386eff0 ("RDMA/irdma: Split mr alloc and free into new functions")
Link: https://lore.kernel.org/r/20231129202143.1434-4-shiraz.saleem@intel.com
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The SQ is shared for between kernel and used by storing the kernel page
pointer and passing that to a kmap_atomic().
This then requires that the alignment is PAGE_SIZE aligned.
Fix by adding an iWarp specific alignment check.
Fixes: e965ef0e7b2c ("RDMA/irdma: Split QP handler into irdma_reg_user_mr_type_qp")
Link: https://lore.kernel.org/r/20231129202143.1434-3-shiraz.saleem@intel.com
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
64k pages introduce the situation in this diagram when the HCA 4k page
size is being used:
+-------------------------------------------+ <--- 64k aligned VA
| |
| HCA 4k page |
| |
+-------------------------------------------+
| o |
| |
| o |
| |
| o |
+-------------------------------------------+
| |
| HCA 4k page |
| |
+-------------------------------------------+ <--- Live HCA page
|OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO| <--- offset
| | <--- VA
| MR data |
+-------------------------------------------+
| |
| HCA 4k page |
| |
+-------------------------------------------+
| o |
| |
| o |
| |
| o |
+-------------------------------------------+
| |
| HCA 4k page |
| |
+-------------------------------------------+
The VA addresses are coming from rdma-core in this diagram can be
arbitrary, but for 64k pages, the VA may be offset by some number of HCA
4k pages and followed by some number of HCA 4k pages.
The current iterator doesn't account for either the preceding 4k pages or
the following 4k pages.
Fix the issue by extending the ib_block_iter to contain the number of DMA
pages like comment [1] says and by using __sg_advance to start the
iterator at the first live HCA page.
The changes are contained in a parallel set of iterator start and next
functions that are umem aware and specific to umem since there is one user
of the rdma_for_each_block() without umem.
These two fixes prevents the extra pages before and after the user MR
data.
Fix the preceding pages by using the __sq_advance field to start at the
first 4k page containing MR data.
Fix the following pages by saving the number of pgsz blocks in the
iterator state and downcounting on each next.
This fix allows for the elimination of the small page crutch noted in the
Fixes.
Fixes: 10c75ccb54e4 ("RDMA/umem: Prevent small pages from being returned by ib_umem_find_best_pgsz()")
Link: https://lore.kernel.org/r/20231129202143.1434-2-shiraz.saleem@intel.com
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
When removing the irdma driver or unplugging its aux device, the ccq
queue is released before destorying the cqp_cmpl_wq queue.
But in the window, there may still be completion events for wqes. That
will cause a UAF in irdma_sc_ccq_get_cqe_info().
[34693.333191] BUG: KASAN: use-after-free in irdma_sc_ccq_get_cqe_info+0x82f/0x8c0 [irdma]
[34693.333194] Read of size 8 at addr ffff889097f80818 by task kworker/u67:1/26327
[34693.333194]
[34693.333199] CPU: 9 PID: 26327 Comm: kworker/u67:1 Kdump: loaded Tainted: G O --------- -t - 4.18.0 #1
[34693.333200] Hardware name: SANGFOR Inspur/NULL, BIOS 4.1.13 08/01/2016
[34693.333211] Workqueue: cqp_cmpl_wq cqp_compl_worker [irdma]
[34693.333213] Call Trace:
[34693.333220] dump_stack+0x71/0xab
[34693.333226] print_address_description+0x6b/0x290
[34693.333238] ? irdma_sc_ccq_get_cqe_info+0x82f/0x8c0 [irdma]
[34693.333240] kasan_report+0x14a/0x2b0
[34693.333251] irdma_sc_ccq_get_cqe_info+0x82f/0x8c0 [irdma]
[34693.333264] ? irdma_free_cqp_request+0x151/0x1e0 [irdma]
[34693.333274] irdma_cqp_ce_handler+0x1fb/0x3b0 [irdma]
[34693.333285] ? irdma_ctrl_init_hw+0x2c20/0x2c20 [irdma]
[34693.333290] ? __schedule+0x836/0x1570
[34693.333293] ? strscpy+0x83/0x180
[34693.333296] process_one_work+0x56a/0x11f0
[34693.333298] worker_thread+0x8f/0xf40
[34693.333301] ? __kthread_parkme+0x78/0xf0
[34693.333303] ? rescuer_thread+0xc50/0xc50
[34693.333305] kthread+0x2a0/0x390
[34693.333308] ? kthread_destroy_worker+0x90/0x90
[34693.333310] ret_from_fork+0x1f/0x40
Fixes: 44d9e52977a1 ("RDMA/irdma: Implement device initialization definitions")
Signed-off-by: Shifeng Li <lishifeng1992@126.com>
Link: https://lore.kernel.org/r/20231121101236.581694-1-lishifeng1992@126.com
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The word "Driver" is repeated twice in the "modinfo bnxt_re"
output description. Fix it.
Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1700555387-6277-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
As we chain the WR during write request: memory registration,
rdma write, local invalidate, if only the last WR fail to send due
to send queue overrun, the server can send back the reply, while
client mark the req->in_use to false in case of error in rtrs_clt_req
when error out from rtrs_post_rdma_write_sg.
Fixes: 6a98d71daea1 ("RDMA/rtrs: client: main functionality")
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://lore.kernel.org/r/20231120154146.920486-8-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
For each write request, we need Request, Response Memory Registration,
Local Invalidate.
Fixes: 6a98d71daea1 ("RDMA/rtrs: client: main functionality")
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://lore.kernel.org/r/20231120154146.920486-7-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Destroying path files may lead to the freeing of rdma_stats. This creates
the following race.
An IO is in-flight, or has just passed the session state check in
process_read/process_write. The close_work gets triggered and the function
rtrs_srv_close_work() starts and does destroy path which frees the
rdma_stats. After this the function process_read/process_write resumes and
tries to update the stats through the function rtrs_srv_update_rdma_stats
This commit solves the problem by moving the destroy path function to a
later point. This point makes sure any inflights are completed. This is
done by qp drain, and waiting for all in-flights through ops_id.
Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality")
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Santosh Kumar Pradhan <santosh.pradhan@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://lore.kernel.org/r/20231120154146.920486-6-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Since srv_mr->iu is allocated and used only when always_invalidate is
true, free it only when always_invalidate is true.
Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality")
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://lore.kernel.org/r/20231120154146.920486-5-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
While processing info request, it could so happen that the srv_path goes
to CLOSING state, cause of any of the error events from RDMA. That state
change should be picked up while trying to change the state in
process_info_req, by checking the return value. In case the state change
call in process_info_req fails, we fail the processing.
We should also check the return value for rtrs_srv_path_up, since it
sends a link event to the client above, and the client can fail for any
reason.
Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality")
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://lore.kernel.org/r/20231120154146.920486-4-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
If we start hb too early, it will confuse server side to close
the session.
Fixes: 6a98d71daea1 ("RDMA/rtrs: client: main functionality")
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://lore.kernel.org/r/20231120154146.920486-3-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When IO is completed, rtrs can be called in softirq context,
unconditionally enabling irq could cause panic.
To be on safe side, use spin_lock_irqsave and spin_unlock_irqrestore
instread.
Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality")
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Florian-Ewald Mueller <florian-ewald.mueller@ionos.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://lore.kernel.org/r/20231120154146.920486-2-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Currently, there is no wait for the QP suspend to complete on a modify
to SQD state. Add a wait, after the modify to SQD state, for the Suspend
Complete AE. While we are at it, update the suspend timeout value in
irdma_prep_tc_change to use IRDMA_EVENT_TIMEOUT_MS too.
Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20231114170246.238-3-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Remove the modify to SQD before going to ERROR state. It is not needed.
Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20231114170246.238-2-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
algorithm
Add a default congest control algorithm so that driver won't return
an error when the configured algorithm is invalid.
Fixes: f91696f2f053 ("RDMA/hns: Support congestion control type selection according to the FW")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231028093242.670325-1-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
KMSAN reported the following uninit-value access issue:
lo speed is unknown, defaulting to 1000
=====================================================
BUG: KMSAN: uninit-value in ib_get_width_and_speed drivers/infiniband/core/verbs.c:1889 [inline]
BUG: KMSAN: uninit-value in ib_get_eth_speed+0x546/0xaf0 drivers/infiniband/core/verbs.c:1998
ib_get_width_and_speed drivers/infiniband/core/verbs.c:1889 [inline]
ib_get_eth_speed+0x546/0xaf0 drivers/infiniband/core/verbs.c:1998
siw_query_port drivers/infiniband/sw/siw/siw_verbs.c:173 [inline]
siw_get_port_immutable+0x6f/0x120 drivers/infiniband/sw/siw/siw_verbs.c:203
setup_port_data drivers/infiniband/core/device.c:848 [inline]
setup_device drivers/infiniband/core/device.c:1244 [inline]
ib_register_device+0x1589/0x1df0 drivers/infiniband/core/device.c:1383
siw_device_register drivers/infiniband/sw/siw/siw_main.c:72 [inline]
siw_newlink+0x129e/0x13d0 drivers/infiniband/sw/siw/siw_main.c:490
nldev_newlink+0x8fd/0xa60 drivers/infiniband/core/nldev.c:1763
rdma_nl_rcv_skb drivers/infiniband/core/netlink.c:239 [inline]
rdma_nl_rcv+0xe8a/0x1120 drivers/infiniband/core/netlink.c:259
netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline]
netlink_unicast+0xf4b/0x1230 net/netlink/af_netlink.c:1368
netlink_sendmsg+0x1242/0x1420 net/netlink/af_netlink.c:1910
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
____sys_sendmsg+0x997/0xd60 net/socket.c:2588
___sys_sendmsg+0x271/0x3b0 net/socket.c:2642
__sys_sendmsg net/socket.c:2671 [inline]
__do_sys_sendmsg net/socket.c:2680 [inline]
__se_sys_sendmsg net/socket.c:2678 [inline]
__x64_sys_sendmsg+0x2fa/0x4a0 net/socket.c:2678
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Local variable lksettings created at:
ib_get_eth_speed+0x4b/0xaf0 drivers/infiniband/core/verbs.c:1974
siw_query_port drivers/infiniband/sw/siw/siw_verbs.c:173 [inline]
siw_get_port_immutable+0x6f/0x120 drivers/infiniband/sw/siw/siw_verbs.c:203
CPU: 0 PID: 11257 Comm: syz-executor.1 Not tainted 6.6.0-14500-g1c41041124bd #10
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014
=====================================================
If __ethtool_get_link_ksettings() fails, `netdev_speed` is set to the
default value, SPEED_1000. In this case, if `lanes` field of struct
ethtool_link_ksettings is not initialized, an uninitialized value is passed
to ib_get_width_and_speed(). This causes the above issue. This patch
resolves the issue by initializing `lanes` to 0.
Fixes: cb06b6b3f6cb ("RDMA/core: Get IB width and speed from netdev")
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Link: https://lore.kernel.org/r/20231108143113.1360567-1-syoshida@redhat.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Pull rdma updates from Jason Gunthorpe:
"Nothing exciting this cycle, most of the diffstat is changing SPDX
'or' to 'OR'.
Summary:
- Bugfixes for hns, mlx5, and hfi1
- Hardening patches for size_*, counted_by, strscpy
- rts fixes from static analysis
- Dump SRQ objects in rdma netlink, with hns support
- Fix a performance regression in mlx5 MR deregistration
- New XDR (200Gb/lane) link speed
- SRQ record doorbell latency optimization for hns
- IPSEC support for mlx5 multi-port mode
- ibv_rereg_mr() support for irdma
- Affiliated event support for bnxt_re
- Opt out for the spec compliant qkey security enforcement as we
discovered SW that breaks under enforcement
- Comment and trivial updates"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (50 commits)
IB/mlx5: Fix init stage error handling to avoid double free of same QP and UAF
RDMA/mlx5: Fix mkey cache WQ flush
RDMA/hfi1: Workaround truncation compilation error
IB/hfi1: Fix potential deadlock on &irq_src_lock and &dd->uctxt_lock
RDMA/core: Remove NULL check before dev_{put, hold}
RDMA/hfi1: Remove redundant assignment to pointer ppd
RDMA/mlx5: Change the key being sent for MPV device affiliation
RDMA/bnxt_re: Fix clang -Wimplicit-fallthrough in bnxt_re_handle_cq_async_error()
RDMA/hns: Fix init failure of RoCE VF and HIP08
RDMA/hns: Fix unnecessary port_num transition in HW stats allocation
RDMA/hns: The UD mode can only be configured with DCQCN
RDMA/hns: Add check for SL
RDMA/hns: Fix signed-unsigned mixed comparisons
RDMA/hns: Fix uninitialized ucmd in hns_roce_create_qp_common()
RDMA/hns: Fix printing level of asynchronous events
RDMA/core: Add support to set privileged QKEY parameter
RDMA/bnxt_re: Do not report SRQ error in srq notification
RDMA/bnxt_re: Report async events and errors
RDMA/bnxt_re: Update HW interface headers
IB/mlx5: Fix rdma counter binding for RAW QP
...
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, megaraid_sas, lpfc, target, ibmvfc,
scsi_debug) plus the usual assorted minor fixes and updates.
The major change this time around is a prep patch for rethreading of
the driver reset handler API not to take a scsi_cmd structure which
starts to reduce various drivers' dependence on scsi_cmd in error
handling"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (132 commits)
scsi: ufs: core: Leave space for '\0' in utf8 desc string
scsi: ufs: core: Conversion to bool not necessary
scsi: ufs: core: Fix race between force complete and ISR
scsi: megaraid: Fix up debug message in megaraid_abort_and_reset()
scsi: aic79xx: Fix up NULL command in ahd_done()
scsi: message: fusion: Initialize return value in mptfc_bus_reset()
scsi: mpt3sas: Fix loop logic
scsi: snic: Remove useless code in snic_dr_clean_pending_req()
scsi: core: Add comment to target_destroy in scsi_host_template
scsi: core: Clean up scsi_dev_queue_ready()
scsi: pmcraid: Add missing scsi_device_put() in pmcraid_eh_target_reset_handler()
scsi: target: core: Fix kernel-doc comment
scsi: pmcraid: Fix kernel-doc comment
scsi: core: Handle depopulation and restoration in progress
scsi: ufs: core: Add support for parsing OPP
scsi: ufs: core: Add OPP support for scaling clocks and regulators
scsi: ufs: dt-bindings: common: Add OPP table
scsi: scsi_debug: Add param to control sdev's allow_restart
scsi: scsi_debug: Add debugfs interface to fail target reset
scsi: scsi_debug: Add new error injection type: Reset LUN failed
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"To help make the move of sysctls out of kernel/sysctl.c not incur a
size penalty sysctl has been changed to allow us to not require the
sentinel, the final empty element on the sysctl array. Joel Granados
has been doing all this work. On the v6.6 kernel we got the major
infrastructure changes required to support this. For v6.7-rc1 we have
all arch/ and drivers/ modified to remove the sentinel. Both arch and
driver changes have been on linux-next for a bit less than a month. It
is worth re-iterating the value:
- this helps reduce the overall build time size of the kernel and run
time memory consumed by the kernel by about ~64 bytes per array
- the extra 64-byte penalty is no longer inncurred now when we move
sysctls out from kernel/sysctl.c to their own files
For v6.8-rc1 expect removal of all the sentinels and also then the
unneeded check for procname == NULL.
The last two patches are fixes recently merged by Krister Johansen
which allow us again to use softlockup_panic early on boot. This used
to work but the alias work broke it. This is useful for folks who want
to detect softlockups super early rather than wait and spend money on
cloud solutions with nothing but an eventual hung kernel. Although
this hadn't gone through linux-next it's also a stable fix, so we
might as well roll through the fixes now"
* tag 'sysctl-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (23 commits)
watchdog: move softlockup_panic back to early_param
proc: sysctl: prevent aliased sysctls from getting passed to init
intel drm: Remove now superfluous sentinel element from ctl_table array
Drivers: hv: Remove now superfluous sentinel element from ctl_table array
raid: Remove now superfluous sentinel element from ctl_table array
fw loader: Remove the now superfluous sentinel element from ctl_table array
sgi-xp: Remove the now superfluous sentinel element from ctl_table array
vrf: Remove the now superfluous sentinel element from ctl_table array
char-misc: Remove the now superfluous sentinel element from ctl_table array
infiniband: Remove the now superfluous sentinel element from ctl_table array
macintosh: Remove the now superfluous sentinel element from ctl_table array
parport: Remove the now superfluous sentinel element from ctl_table array
scsi: Remove now superfluous sentinel element from ctl_table array
tty: Remove now superfluous sentinel element from ctl_table array
xen: Remove now superfluous sentinel element from ctl_table array
hpet: Remove now superfluous sentinel element from ctl_table array
c-sky: Remove now superfluous sentinel element from ctl_talbe array
powerpc: Remove now superfluous sentinel element from ctl_table arrays
riscv: Remove now superfluous sentinel element from ctl_table array
x86/vdso: Remove now superfluous sentinel element from ctl_table array
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Support usec resolution of TCP timestamps, enabled selectively by a
route attribute.
- Defer regular TCP ACK while processing socket backlog, try to send
a cumulative ACK at the end. Increase single TCP flow performance
on a 200Gbit NIC by 20% (100Gbit -> 120Gbit).
- The Fair Queuing (FQ) packet scheduler:
- add built-in 3 band prio / WRR scheduling
- support bypass if the qdisc is mostly idle (5% speed up for TCP RR)
- improve inactive flow reporting
- optimize the layout of structures for better cache locality
- Support TCP Authentication Option (RFC 5925, TCP-AO), a more modern
replacement for the old MD5 option.
- Add more retransmission timeout (RTO) related statistics to
TCP_INFO.
- Support sending fragmented skbs over vsock sockets.
- Make sure we send SIGPIPE for vsock sockets if socket was
shutdown().
- Add sysctl for ignoring lower limit on lifetime in Router
Advertisement PIO, based on an in-progress IETF draft.
- Add sysctl to control activation of TCP ping-pong mode.
- Add sysctl to make connection timeout in MPTCP configurable.
- Support rcvlowat and notsent_lowat on MPTCP sockets, to help apps
limit the number of wakeups.
- Support netlink GET for MDB (multicast forwarding), allowing user
space to request a single MDB entry instead of dumping the entire
table.
- Support selective FDB flushing in the VXLAN tunnel driver.
- Allow limiting learned FDB entries in bridges, prevent OOM attacks.
- Allow controlling via configfs netconsole targets which were
created via the kernel cmdline at boot, rather than via configfs at
runtime.
- Support multiple PTP timestamp event queue readers with different
filters.
- MCTP over I3C.
BPF:
- Add new veth-like netdevice where BPF program defines the logic of
the xmit routine. It can operate in L3 and L2 mode.
- Support exceptions - allow asserting conditions which should never
be true but are hard for the verifier to infer. With some extra
flexibility around handling of the exit / failure:
https://lwn.net/Articles/938435/
- Add support for local per-cpu kptr, allow allocating and storing
per-cpu objects in maps. Access to those objects operates on the
value for the current CPU.
This allows to deprecate local one-off implementations of per-CPU
storage like BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE maps.
- Extend cgroup BPF sockaddr hooks for UNIX sockets. The use case is
for systemd to re-implement the LogNamespace feature which allows
running multiple instances of systemd-journald to process the logs
of different services.
- Enable open-coded task_vma iteration, after maple tree conversion
made it hard to directly walk VMAs in tracing programs.
- Add open-coded task, css_task and css iterator support. One of the
use cases is customizable OOM victim selection via BPF.
- Allow source address selection with bpf_*_fib_lookup().
- Add ability to pin BPF timer to the current CPU.
- Prevent creation of infinite loops by combining tail calls and
fentry/fexit programs.
- Add missed stats for kprobes to retrieve the number of missed
kprobe executions and subsequent executions of BPF programs.
- Inherit system settings for CPU security mitigations.
- Add BPF v4 CPU instruction support for arm32 and s390x.
Changes to common code:
- overflow: add DEFINE_FLEX() for on-stack definition of structs with
flexible array members.
- Process doc update with more guidance for reviewers.
Driver API:
- Simplify locking in WiFi (cfg80211 and mac80211 layers), use wiphy
mutex in most places and remove a lot of smaller locks.
- Create a common DPLL configuration API. Allow configuring and
querying state of PLL circuits used for clock syntonization, in
network time distribution.
- Unify fragmented and full page allocation APIs in page pool code.
Let drivers be ignorant of PAGE_SIZE.
- Rework PHY state machine to avoid races with calls to phy_stop().
- Notify DSA drivers of MAC address changes on user ports, improve
correctness of offloads which depend on matching port MAC
addresses.
- Allow antenna control on injected WiFi frames.
- Reduce the number of variants of napi_schedule().
- Simplify error handling when composing devlink health messages.
Misc:
- A lot of KCSAN data race "fixes", from Eric.
- A lot of __counted_by() annotations, from Kees.
- A lot of strncpy -> strscpy and printf format fixes.
- Replace master/slave terminology with conduit/user in DSA drivers.
- Handful of KUnit tests for netdev and WiFi core.
Removed:
- AppleTalk COPS.
- AppleTalk ipddp.
- TI AR7 CPMAC Ethernet driver.
Drivers:
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- add a driver for the Intel E2000 IPUs
- make CRC/FCS stripping configurable
- cross-timestamping for E823 devices
- basic support for E830 devices
- use aux-bus for managing client drivers
- i40e: report firmware versions via devlink
- nVidia/Mellanox:
- support 4-port NICs
- increase max number of channels to 256
- optimize / parallelize SF creation flow
- Broadcom (bnxt):
- enhance NIC temperature reporting
- support PAM4 speeds and lane configuration
- Marvell OcteonTX2:
- PTP pulse-per-second output support
- enable hardware timestamping for VFs
- Solarflare/AMD:
- conntrack NAT offload and offload for tunnels
- Wangxun (ngbe/txgbe):
- expose HW statistics
- Pensando/AMD:
- support PCI level reset
- narrow down the condition under which skbs are linearized
- Netronome/Corigine (nfp):
- support CHACHA20-POLY1305 crypto in IPsec offload
- Ethernet NICs embedded, slower, virtual:
- Synopsys (stmmac):
- add Loongson-1 SoC support
- enable use of HW queues with no offload capabilities
- enable PPS input support on all 5 channels
- increase TX coalesce timer to 5ms
- RealTek USB (r8152): improve efficiency of Rx by using GRO frags
- xen: support SW packet timestamping
- add drivers for implementations based on TI's PRUSS (AM64x EVM)
- nVidia/Mellanox Ethernet datacenter switches:
- avoid poor HW resource use on Spectrum-4 by better block
selection for IPv6 multicast forwarding and ordering of blocks
in ACL region
- Ethernet embedded switches:
- Microchip:
- support configuring the drive strength for EMI compliance
- ksz9477: partial ACL support
- ksz9477: HSR offload
- ksz9477: Wake on LAN
- Realtek:
- rtl8366rb: respect device tree config of the CPU port
- Ethernet PHYs:
- support Broadcom BCM5221 PHYs
- TI dp83867: support hardware LED blinking
- CAN:
- add support for Linux-PHY based CAN transceivers
- at91_can: clean up and use rx-offload helpers
- WiFi:
- MediaTek (mt76):
- new sub-driver for mt7925 USB/PCIe devices
- HW wireless <> Ethernet bridging in MT7988 chips
- mt7603/mt7628 stability improvements
- Qualcomm (ath12k):
- WCN7850:
- enable 320 MHz channels in 6 GHz band
- hardware rfkill support
- enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS to
make scan faster
- read board data variant name from SMBIOS
- QCN9274: mesh support
- RealTek (rtw89):
- TDMA-based multi-channel concurrency (MCC)
- Silicon Labs (wfx):
- Remain-On-Channel (ROC) support
- Bluetooth:
- ISO: many improvements for broadcast support
- mark BCM4378/BCM4387 as BROKEN_LE_CODED
- add support for QCA2066
- btmtksdio: enable Bluetooth wakeup from suspend"
* tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1816 commits)
net: pcs: xpcs: Add 2500BASE-X case in get state for XPCS drivers
net: bpf: Use sockopt_lock_sock() in ip_sock_set_tos()
net: mana: Use xdp_set_features_flag instead of direct assignment
vxlan: Cleanup IFLA_VXLAN_PORT_RANGE entry in vxlan_get_size()
iavf: delete the iavf client interface
iavf: add a common function for undoing the interrupt scheme
iavf: use unregister_netdev
iavf: rely on netdev's own registered state
iavf: fix the waiting time for initial reset
iavf: in iavf_down, don't queue watchdog_task if comms failed
iavf: simplify mutex_trylock+sleep loops
iavf: fix comments about old bit locks
doc/netlink: Update schema to support cmd-cnt-name and cmd-max-name
tools: ynl: introduce option to process unknown attributes or types
ipvlan: properly track tx_errors
netdevsim: Block until all devices are released
nfp: using napi_build_skb() to replace build_skb()
net: dsa: microchip: ksz9477: Fix spelling mistake "Enery" -> "Energy"
net: dsa: microchip: Ensure Stable PME Pin State for Wake-on-LAN
net: dsa: microchip: Refactor switch shutdown routine for WoL preparation
...
|
|
In the unlikely event that workqueue allocation fails and returns NULL in
mlx5_mkey_cache_init(), delete the call to
mlx5r_umr_resource_cleanup() (which frees the QP) in
mlx5_ib_stage_post_ib_reg_umr_init(). This will avoid attempted double
free of the same QP when __mlx5_ib_add() does its cleanup.
Resolves a splat:
Syzkaller reported a UAF in ib_destroy_qp_user
workqueue: Failed to create a rescuer kthread for wq "mkey_cache": -EINTR
infiniband mlx5_0: mlx5_mkey_cache_init:981:(pid 1642):
failed to create work queue
infiniband mlx5_0: mlx5_ib_stage_post_ib_reg_umr_init:4075:(pid 1642):
mr cache init failed -12
==================================================================
BUG: KASAN: slab-use-after-free in ib_destroy_qp_user (drivers/infiniband/core/verbs.c:2073)
Read of size 8 at addr ffff88810da310a8 by task repro_upstream/1642
Call Trace:
<TASK>
kasan_report (mm/kasan/report.c:590)
ib_destroy_qp_user (drivers/infiniband/core/verbs.c:2073)
mlx5r_umr_resource_cleanup (drivers/infiniband/hw/mlx5/umr.c:198)
__mlx5_ib_add (drivers/infiniband/hw/mlx5/main.c:4178)
mlx5r_probe (drivers/infiniband/hw/mlx5/main.c:4402)
...
</TASK>
Allocated by task 1642:
__kmalloc (./include/linux/kasan.h:198 mm/slab_common.c:1026
mm/slab_common.c:1039)
create_qp (./include/linux/slab.h:603 ./include/linux/slab.h:720
./include/rdma/ib_verbs.h:2795 drivers/infiniband/core/verbs.c:1209)
ib_create_qp_kernel (drivers/infiniband/core/verbs.c:1347)
mlx5r_umr_resource_init (drivers/infiniband/hw/mlx5/umr.c:164)
mlx5_ib_stage_post_ib_reg_umr_init (drivers/infiniband/hw/mlx5/main.c:4070)
__mlx5_ib_add (drivers/infiniband/hw/mlx5/main.c:4168)
mlx5r_probe (drivers/infiniband/hw/mlx5/main.c:4402)
...
Freed by task 1642:
__kmem_cache_free (mm/slub.c:1826 mm/slub.c:3809 mm/slub.c:3822)
ib_destroy_qp_user (drivers/infiniband/core/verbs.c:2112)
mlx5r_umr_resource_cleanup (drivers/infiniband/hw/mlx5/umr.c:198)
mlx5_ib_stage_post_ib_reg_umr_init (drivers/infiniband/hw/mlx5/main.c:4076
drivers/infiniband/hw/mlx5/main.c:4065)
__mlx5_ib_add (drivers/infiniband/hw/mlx5/main.c:4168)
mlx5r_probe (drivers/infiniband/hw/mlx5/main.c:4402)
...
Fixes: 04876c12c19e ("RDMA/mlx5: Move init and cleanup of UMR to umr.c")
Link: https://lore.kernel.org/r/1698170518-4006-1-git-send-email-george.kennedy@oracle.com
Suggested-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The cited patch tries to ensure no pending works on the mkey cache
workqueue by disabling adding new works and call flush_workqueue().
But this workqueue also has delayed works which might still be pending
the delay time to be queued.
Add cancel_delayed_work() for the delayed works which waits to be queued
and then the flush_workqueue() will flush all works which are already
queued and running.
Fixes: 374012b00457 ("RDMA/mlx5: Fix mkey cache possible deadlock on cleanup")
Link: https://lore.kernel.org/r/b8722f14e7ed81452f791764a26d2ed4cfa11478.1698256179.git.leon@kernel.org
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Resolve conflict by taking the spin_lock hunk from for-next:
https://lore.kernel.org/r/20230928113851.5197a1ec@canb.auug.org.au
Required for the next patch.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs inode time accessor updates from Christian Brauner:
"This finishes the conversion of all inode time fields to accessor
functions as discussed on list. Changing timestamps manually as we
used to do before is error prone. Using accessors function makes this
robust.
It does not contain the switch of the time fields to discrete 64 bit
integers to replace struct timespec and free up space in struct inode.
But after this, the switch can be trivially made and the patch should
only affect the vfs if we decide to do it"
* tag 'vfs-6.7.ctime' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (86 commits)
fs: rename inode i_atime and i_mtime fields
security: convert to new timestamp accessors
selinux: convert to new timestamp accessors
apparmor: convert to new timestamp accessors
sunrpc: convert to new timestamp accessors
mm: convert to new timestamp accessors
bpf: convert to new timestamp accessors
ipc: convert to new timestamp accessors
linux: convert to new timestamp accessors
zonefs: convert to new timestamp accessors
xfs: convert to new timestamp accessors
vboxsf: convert to new timestamp accessors
ufs: convert to new timestamp accessors
udf: convert to new timestamp accessors
ubifs: convert to new timestamp accessors
tracefs: convert to new timestamp accessors
sysv: convert to new timestamp accessors
squashfs: convert to new timestamp accessors
server: convert to new timestamp accessors
client: convert to new timestamp accessors
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull iov_iter updates from Christian Brauner:
"This contain's David's iov_iter cleanup work to convert the iov_iter
iteration macros to inline functions:
- Remove last_offset from iov_iter as it was only used by ITER_PIPE
- Add a __user tag on copy_mc_to_user()'s dst argument on x86 to
match that on powerpc and get rid of a sparse warning
- Convert iter->user_backed to user_backed_iter() in the sound PCM
driver
- Convert iter->user_backed to user_backed_iter() in a couple of
infiniband drivers
- Renumber the type enum so that the ITER_* constants match the order
in iterate_and_advance*()
- Since the preceding patch puts UBUF and IOVEC at 0 and 1, change
user_backed_iter() to just use the type value and get rid of the
extra flag
- Convert the iov_iter iteration macros to always-inline functions to
make the code easier to follow. It uses function pointers, but they
get optimised away
- Move the check for ->copy_mc to _copy_from_iter() and
copy_page_from_iter_atomic() rather than in memcpy_from_iter_mc()
where it gets repeated for every segment. Instead, we check once
and invoke a side function that can use iterate_bvec() rather than
iterate_and_advance() and supply a different step function
- Move the copy-and-csum code to net/ where it can be in proximity
with the code that uses it
- Fold memcpy_and_csum() in to its two users
- Move csum_and_copy_from_iter_full() out of line and merge in
csum_and_copy_from_iter() since the former is the only caller of
the latter
- Move hash_and_copy_to_iter() to net/ where it can be with its only
caller"
* tag 'vfs-6.7.iov_iter' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
iov_iter, net: Move hash_and_copy_to_iter() to net/
iov_iter, net: Merge csum_and_copy_from_iter{,_full}() together
iov_iter, net: Fold in csum_and_memcpy()
iov_iter, net: Move csum_and_copy_to/from_iter() to net/
iov_iter: Don't deal with iter->copy_mc in memcpy_from_iter_mc()
iov_iter: Convert iterate*() to inline funcs
iov_iter: Derive user-backedness from the iterator type
iov_iter: Renumber ITER_* constants
infiniband: Use user_backed_iter() to see if iterator is UBUF/IOVEC
sound: Fix snd_pcm_readv()/writev() to use iov access functions
iov_iter, x86: Be consistent about the __user tag on copy_mc_to_user()
iov_iter: Remove last_offset from iov_iter as it was for ITER_PIPE
|
|
Increase name array to be large enough to overcome the following
compilation error.
drivers/infiniband/hw/hfi1/efivar.c: In function ‘read_hfi1_efi_var’:
drivers/infiniband/hw/hfi1/efivar.c:124:44: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
124 | snprintf(name, sizeof(name), "%s-%s", prefix_name, kind);
| ^
drivers/infiniband/hw/hfi1/efivar.c:124:9: note: ‘snprintf’ output 2 or more bytes (assuming 65) into a destination of size 64
124 | snprintf(name, sizeof(name), "%s-%s", prefix_name, kind);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/hfi1/efivar.c:133:52: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
133 | snprintf(name, sizeof(name), "%s-%s", prefix_name, kind);
| ^
drivers/infiniband/hw/hfi1/efivar.c:133:17: note: ‘snprintf’ output 2 or more bytes (assuming 65) into a destination of size 64
133 | snprintf(name, sizeof(name), "%s-%s", prefix_name, kind);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make[6]: *** [scripts/Makefile.build:243: drivers/infiniband/hw/hfi1/efivar.o] Error 1
Fixes: c03c08d50b3d ("IB/hfi1: Check upper-case EFI variables")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/238fa39a8fd60e87a5ad7e1ca6584fcdf32e9519.1698159993.git.leonro@nvidia.com
Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
handle_receive_interrupt_napi_sp() running inside interrupt handler
could introduce inverse lock ordering between &dd->irq_src_lock
and &dd->uctxt_lock, if read_mod_write() is preempted by the isr.
[CPU0] | [CPU1]
hfi1_ipoib_dev_open() |
--> hfi1_netdev_enable_queues() |
--> enable_queues(rx) |
--> hfi1_rcvctrl() |
--> set_intr_bits() |
--> read_mod_write() |
--> spin_lock(&dd->irq_src_lock) |
| hfi1_poll()
| --> poll_next()
| --> spin_lock_irq(&dd->uctxt_lock)
|
| --> hfi1_rcvctrl()
| --> set_intr_bits()
| --> read_mod_write()
| --> spin_lock(&dd->irq_src_lock)
<interrupt> |
--> handle_receive_interrupt_napi_sp() |
--> set_all_fastpath() |
--> hfi1_rcd_get_by_index() |
--> spin_lock_irqsave(&dd->uctxt_lock) |
This flaw was found by an experimental static analysis tool I am
developing for irq-related deadlock.
To prevent the potential deadlock, the patch use spin_lock_irqsave()
on &dd->irq_src_lock inside read_mod_write() to prevent the possible
deadlock scenario.
Signed-off-by: Chengfeng Ye <dg573847474@gmail.com>
Link: https://lore.kernel.org/r/20230926101116.2797-1-dg573847474@gmail.com
Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The call netdev_{put, hold} of dev_{put, hold} will check NULL,
so there is no need to check before using dev_{put, hold},
remove it to silence the warning:
./drivers/infiniband/core/nldev.c:375:2-9: WARNING: NULL check before dev_{put, hold} functions is not needed.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7047
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20231024003815.89742-1-yang.lee@linux.alibaba.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Pointer ppd is being assigned a value in a for-loop however it
is never read. The assignment is redundant and can be removed.
Cleans up clang scan build warning:
drivers/infiniband/hw/hfi1/init.c:1030:3: warning: Value stored
to 'ppd' is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20231023141733.667807-1-colin.i.king@gmail.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Change the key that we send from IB driver to EN driver regarding the
MPV device affiliation, since at that stage the IB device is not yet
initialized, so its index would be zero for different IB devices and
cause wrong associations between unrelated master and slave devices.
Instead use a unique value from inside the core device which is already
initialized at this stage.
Fixes: 0d293714ac32 ("RDMA/mlx5: Send events from IB driver about device affiliation state")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Link: https://lore.kernel.org/r/ac7e66357d963fc68d7a419515180212c96d137d.1697705185.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
bnxt_re_handle_cq_async_error()
Clang warns (or errors with CONFIG_WERROR=y):
drivers/infiniband/hw/bnxt_re/main.c:1114:2: error: unannotated fall-through between switch labels [-Werror,-Wimplicit-fallthrough]
1114 | default:
| ^
drivers/infiniband/hw/bnxt_re/main.c:1114:2: note: insert 'break;' to avoid fall-through
1114 | default:
| ^
| break;
1 error generated.
Clang is a little more pedantic than GCC, which does not warn when
falling through to a case that is just break or return. Clang's version
is more in line with the kernel's own stance in deprecated.rst, which
states that all switch/case blocks must end in either break,
fallthrough, continue, goto, or return. Add the missing break to silence
the warning.
Closes: https://github.com/ClangBuiltLinux/linux/issues/1950
Fixes: b02fd3f79ec3 ("RDMA/bnxt_re: Report async events and errors")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20231020-bnxt_re-implicit-fallthrough-v1-1-b5c19534a6c9@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
During device init, a struct for HW stats will be allocated. As HW
stats are not supported for VF and HIP08, currently
hns_roce_alloc_hw_port_stats() returns NULL in this case. However,
ib-core considers the returned NULL pointer as memory allocation
failure and returns ENOMEM, eventually leading to the failure of VF
and HIP08 init.
In the case where the driver does not support the .alloc_hw_port_stats()
ops, ib-core will return EOPNOTSUPP and ignore this error code in the
upper layer function. So for VF and HIP08, just don't set the HW stats
ops to ib-core.
Fixes: 5a87279591a1 ("RDMA/hns: Support hns HW stats")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-8-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The num_ports capability of devices should be compared with the
number of port(i.e. the input param "port_num") but not the port
index(i.e. port_num - 1).
Fixes: 5a87279591a1 ("RDMA/hns: Support hns HW stats")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-7-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Due to hardware limitations, only DCQCN is supported for UD. Therefore, the
default algorithm for UD is set to DCQCN.
Fixes: f91696f2f053 ("RDMA/hns: Support congestion control type selection according to the FW")
Signed-off-by: Luoyouming <luoyouming@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-6-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
SL set by users may exceed the capability of devices. So add check
for this situation.
Fixes: fba429fcf9a5 ("RDMA/hns: Fix missing fields in address vector")
Fixes: 70f92521584f ("RDMA/hns: Use the reserved loopback QPs to free MR before destroying MPT")
Fixes: f0cb411aad23 ("RDMA/hns: Use new interface to modify QP context")
Signed-off-by: Luoyouming <luoyouming@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-5-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The ib_mtu_enum_to_int() and uverbs_attr_get_len() may returns a negative
value. In this case, mixed comparisons of signed and unsigned types will
throw wrong results.
This patch adds judgement for this situation.
Fixes: 30b707886aeb ("RDMA/hns: Support inline data in extented sge space for RC")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-4-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
ucmd in hns_roce_create_qp_common() are not initialized. But it works fine
until new member sdb_addr is added to struct hns_roce_ib_create_qp.
If the user-mode driver uses an old version ABI, then the value of the new
member will be undefined after ib_copy_from_udata().
This patch fixes it by initialize this variable to 0. And the default value
of the new member sdb_addr will be 0 which is invalid.
Fixes: 0425e3e6e0c7 ("RDMA/hns: Support flush cqe for hip08 in kernel space")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-3-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The current driver will print all asynchronous events. Some of the
print levels are set improperly, e.g. SRQ limit reach and SRQ last
wqe reach, which may also occur during normal operation of the software.
Currently, the information of these event is printed as a warning,
which causes a large amount of printing even during normal use of the
application. As a result, the service performance deteriorates.
This patch fixes the printing storms by modifying the print level.
Fixes: b00a92c8f2ca ("RDMA/hns: Move all prints out of irq handle")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add netlink command that enables/disables privileged QKEY by default.
It is disabled by default, since according to IB spec only privileged
users are allowed to use privileged QKEY.
According to the IB specification rel-1.6, section 3.5.3:
"QKEYs with the most significant bit set are considered controlled
QKEYs, and a HCA does not allow a consumer to arbitrarily specify a
controlled QKEY."
Using rdma tool,
$rdma system set privileged-qkey on
When enabled non-privileged users would be able to use
controlled QKEYs which are considered privileged.
Using rdma tool,
$rdma system set privileged-qkey off
When disabled only privileged users would be able to use
controlled QKEYs.
You can also use the command below to check the parameter state:
$rdma system show
netns shared privileged-qkey off copy-on-fork on
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Link: https://lore.kernel.org/r/90398be70a9d23d2aa9d0f9fd11d2c264c1be534.1696848201.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Convert to using the new inode timestamp accessor functions.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20231004185347.80880-5-jlayton@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In the SRQ notification handler, do not report the SRQ_ERROR
in the default event case, as there was no error.
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1697049097-31992-4-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Report QP, SRQ and CQ async events and errors.
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1697049097-31992-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Updating the HW structures for the affiliated event and error
reporting. Newly added interface structures will be used in the
followup patch.
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1697049097-31992-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Previously when we had a RAW QP, we bound a counter to it when it moved
to INIT state, using the counter context inside RQC.
But when we try to modify that counter later in RTS state we used
modify QP which tries to change the counter inside QPC instead of RQC.
Now we correctly modify the counter set_id inside of RQC instead of QPC
for the RAW QP.
Fixes: d14133dd4161 ("IB/mlx5: Support set qp counter")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/2e5ab6713784a8fe997d19c508187a0dfecf2dfc.1696847964.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
In some cases, like with multiple LUN targets or where the target has to
respond to transport level requests from the receiving context it can be
better to defer cmd submission to a helper thread. If the backend driver
blocks on something like request/tag allocation it can block the entire
target submission path and other LUs and transport IO on that session.
In other cases like single LUN targets with storage that can support all
the commands that the target can queue, then it's best to submit the cmd
to the backend from the target's cmd receiving context.
Subsequent commits will allow the user to config what they prefer, but
drivers like loop can't directly submit because they can be called from a
context that can't sleep. And, drivers like vhost-scsi can support direct
submission, but need to keep their default behavior of deferring execution
to avoid possible regressions where the backend can block.
Make the drivers tell LIO core if they support direct submissions and their
current default, so we can prevent users from misconfiguring the system and
initialize devices correctly.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230928020907.5730-2-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Leon Romanovsky says:
====================
This PR is collected from
https://lore.kernel.org/all/cover.1695296682.git.leon@kernel.org
This series from Patrisious extends mlx5 to support IPsec packet offload
in multiport devices (MPV, see [1] for more details).
These devices have single flow steering logic and two netdev interfaces,
which require extra logic to manage IPsec configurations as they performed
on netdevs.
[1] https://lore.kernel.org/linux-rdma/20180104152544.28919-1-leon@kernel.org/
* 'mlx5-next' of https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Handle IPsec steering upon master unbind/bind
net/mlx5: Configure IPsec steering for ingress RoCEv2 MPV traffic
net/mlx5: Configure IPsec steering for egress RoCEv2 MPV traffic
net/mlx5: Add create alias flow table function to ipsec roce
net/mlx5: Implement alias object allow and create functions
net/mlx5: Add alias flow table bits
net/mlx5: Store devcom pointer inside IPsec RoCE
net/mlx5: Register mlx5e priv to devcom in MPV mode
RDMA/mlx5: Send events from IB driver about device affiliation state
net/mlx5: Introduce ifc bits for migration in a chunk mode
====================
Link: https://lore.kernel.org/r/20231002083832.19746-1-leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
kernel/bpf/verifier.c
829955981c55 ("bpf: Fix verifier log for async callback return values")
a923819fb2c5 ("bpf: Treat first argument as return value for bpf_throw")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that napi_schedule return a bool, we can drop napi_reschedule that
does the same exact function. The function comes from a very old commit
bfe13f54f502 ("ibm_emac: Convert to use napi_struct independent of struct
net_device") and the purpose is actually deprecated in favour of
different logic.
Convert every user of napi_reschedule to napi_schedule.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> # ath10k
Acked-by: Nick Child <nnac123@linux.ibm.com> # ibm
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for can/dev/rx-offload.c
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20231009133754.9834-3-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
Remove sentinel from iwcm_ctl_table and ucma_ctl_table
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|