| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This reverts commit bbd9d05618a6d608c72640b1d3d651a75913456a.
entirely unused.
|
|
This code was added in b65e64f7ccd4 ("drm/cma: Use
dma_mmap_writecombine() to mmap buffer"), but does not explain why
it's needed.
It should be entirely unnecessary, because remap_pfn_range(), which is
what the various dma_mmap functiosn are built on top of, does already
unconditionally adjust the vma flags:
https://elixir.bootlin.com/linux/v6.1-rc6/source/mm/memory.c#L2518
More importantly, it does uncondtionally set VM_PFNMAP, so clearing
that does not make much sense.
Patch motived by discussions around enforcing VM_PFNMAP semantics for
all dma-buf users, where Thomas asked why dma helpers will work with
that dma_buf_mmap() contract.
FIXME: There are dma implementations which don't set VM_PFNMAP. This
is a can of worms.
References: https://lore.kernel.org/dri-devel/5c3c8d4f-2c06-9210-b00a-4d0ff6f6fbb7@suse.de/
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
Specifically write down the lifetime rules.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
Spotted while auditing for everything that uses struct
i915_gem_context.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
Not needed now that gpu relocations are gone.
Also this fixes a bug since if we're supremely unlucky the next batch
might also be ASYNC, reuse the buffer without any changes, and on a
different engine, and then we'll fail to sync against our relocation
patching buffer.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
|
|
The most relocation-affine userspace we have is SNA, which limits it's
batches to roughly 256KB. Max relocation density is a relocation every
8 bytes (one dword instruction, one dword address), which means at
most 32kb relocations. Which with 32 bytes per relocation entry means
at most 1MiB.
This uapi change was introduced in
commit 2889caa9232109afc8881f29a2205abeb5709d0c
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri Jun 16 15:05:19 2017 +0100
drm/i915: Eliminate lots of iterations over the execobjects array
and the commit doesn't explain why this was done. The best fit
explanation I could come up with is that as part of making relocations
really, really fast, even for the cold relocation case an igt testcase
was added with ridiculous amounts of relocations:
commit 506d683da138a7b90f5e338d522012f00d3145e9
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu Jan 28 11:46:21 2016 +0000
tests: Add gem_exec_reloc
Which I guess then motivated working on this and resulted in later igt
work to limit the overflow checks, which have been quite a bit
strictker than the above testcase.
commit 2d2b61e1608433733de3d04a492d0d85a93933cd
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Mon Mar 7 15:34:02 2016 +0000
igt/gem_reloc_overflow: Fix errno tests for "overflow"
Which also means that both of these igt commits introduced new tests
which failed from the start, which I guess was then justified to push
for this change (hidden away in a larger patch that did install a new
kitchen sink, new kitchen, new house and new village because). Or
something like that.
Note that the main reloc optimization patches are
commit 31a39207f04a37324d70ff5665fd19d3a75b39c1
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu Aug 18 17:16:46 2016 +0100
drm/i915: Cache kmap between relocations
and
commit d50415cc6c8395602052b39a1a39290fba3d313e
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu Aug 18 17:16:52 2016 +0100
drm/i915: Refactor execbuffer relocation writing
so actually landed substantially after all the igt tests. Which means
we have a pretty epic case of igt-driven uapi development here.
Anyway, long story short: Burn it to the ground.
Note that this doesn't fully go back to the old limit, because the old
code had an overflow limit of UINT_MAX across all relocations of all
buffers, due to how we only allocated a single array for all of them
in the slow path. Since the main push of 2889caa92321 ("drm/i915:
Eliminate lots of iterations over the execobjects array") is to lift
iterations over the objects we don't absolutely have to do, keeping
the per-object limit seems reasonable. But that means that we can't
just revert the igt changes, but have to adapt the original old tests
to the adjusted limitations.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
|
|
This was added in
commit 2889caa9232109afc8881f29a2205abeb5709d0c
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri Jun 16 15:05:19 2017 +0100
drm/i915: Eliminate lots of iterations over the execobjects array
without any motivation.
I suspect it was added to handle EAGAIN errors from userptr, but it's
hard to guess with no breadcrumbs anywhere. Before this change there
wasn't any dedicated EAGAIN handling, we just bounced completely to
userspace.
Userptr works differently now and does not just thrash the cpu until
another worker has maybe acquired the pages, so we can go back to
handling EAGAIN like beforehand.
That also allows us to drop another funky repeat loop from a function
with already very complicated control flow (which unforunately got
more complex due to ww_mutex restarting).
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
|
|
This was thrown out in
commit 2889caa9232109afc8881f29a2205abeb5709d0c
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri Jun 16 15:05:19 2017 +0100
drm/i915: Eliminate lots of iterations over the execobjects array
with the justification that we're already past the point of no return
(in a comment, not in the commit message).
That's true, but also if userspace is silly and hands us read-only
memory, then we'll only notice that when we write to it. So reporting
the error is still our duty, not that it's likely - at this point
we're dealing with nasty userspace anyway.
Also this is what we've been doing for around 8 years before this
patch changed it.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
|
|
Similar to
commit b44f687386875b714dae2afa768e73401e45c21c
Author: Christophe Leroy <christophe.leroy@c-s.fr>
Date: Fri Apr 3 07:20:52 2020 +0000
drm/i915/gem: Replace user_access_begin by user_write_access_begin
We only do unsafe_put_user, so no read access needed.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
|
|
This was added in
commit c43ce12328df0770ce899feabdf9c430c54c766a
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date: Wed Aug 19 16:08:48 2020 +0200
drm/i915: Use per object locking in execbuf, v12.
but even back then the caller of eb_relocate_parse() was clearing this
flag already too.
This is still the case, so just remove the duplicated clearing.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
|
|
Unused.
There's a pile of other local caching which I'm not sure is worth it,
but alas decided against rocking the boat too much and just focus on
readability of the source code.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: "Thomas Hellstr�m" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
|
|
This is essentially part of drm_sched_dependency_optimized(), which
only amdgpu seems to make use of. Use it a bit more.
This would mean that as-is amdgpu can't use the dependency helpers, at
least not with the current approach amdgpu has for deciding whether a
vm_flush is needed. Since amdgpu also has very special rules around
implicit fencing it can't use those helpers either, and adding a
drm_sched_job_await_fence_always or similar for amdgpu wouldn't be too
onerous. That way the special case handling for amdgpu sticks even
more out and we have higher chances that reviewers that go across all
drivers wont miss it.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
|
|
Some vague evidences suggests this can go wrong. Try to prevent it by
holding the right mutex and clearing ->deferred_setup to make sure we
later on don't accidentally try to re-register the fbdev when the
driver thought it had it all cleaned up already.
v2: I realized that this is fundamentally butchered, and CI complained
about lockdep splats. So limit the critical section again and just add
a few notes what the proper fix is.
References: https://intel-gfx-ci.01.org/tree/linux-next/next-20201215/fi-byt-j1900/igt@i915_pm_rpm@module-reload.html
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
|
|
Per
commit 9f8d4fe94eb4fb958fc92ee91a3ec54ab378339c
Author: Linus Walleij <linus.walleij@linaro.org>
Date: Fri Mar 2 10:09:45 2018 +0100
drm/pl111: Make the default BPP a per-variant variable
these two really prefer the 16bpp formats everywhere.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Eric Anholt <eric@anholt.net>
|
|
Judging by the fbdev setup code it looks like we prefer XRGB8888.
Because I'm fairly sure that the 24 bpp is a mistake, and the driver
doesn't actually prefer RGB888, which is what it is currently getting.
But maybe I'm mistaken.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: linux-arm-kernel@lists.infradead.org
|
|
It's a bit too much. This might break some things, but I also think
module options aren't too much stable uapi.
Also while at it mark the dangerous option as unsafe, it leaks
physical addresses and can't really be used in a safe way by
userspace.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
|
|
C8 doesn't sound great, neither does the 16bpp formats. So put them
down a bit.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
I want to compute the preferred_depth from the primary plane formats
(like atomic userspace would do), for that we need XRGB888 before
ARGB888 or we'll get a preferred_depth of 32 instead of 24.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Russell King <linux@armlinux.org.uk>
|
|
This reverts commit 7fbc6eca6f0db8244cddc39471d71471a2f30254.
I need working lockdep back
|
|
i915 does tons of allocations from this worker, which lockdep catches.
Also generic infrastructure like this with big potential for how
dma_fence or other cross driver contracts work, really should be
reviewed on dri-devel. Implementing custom wheels for everything
within the driver is a classic case of "platform problem" [1]. Which in
upstream we really shouldn't have.
Since there's no quick way to solve these splats (dma_fence_work is
used a bunch in basic buffer management and command submission) like
for amdgpu, I'm giving up at this point here. Annotating i915
scheduler and gpu reset could would be interesting, but since lockdep
is one-shot we can't see what surprises would lurk there.
1: https://lwn.net/Articles/443531/
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: linux-rdma@vger.kernel.org
Cc: amd-gfx@lists.freedesktop.org
Cc: intel-gfx@lists.freedesktop.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
Ends right after drm_atomic_helper_commit_hw_done(), absolutely
nothing fancy going on here.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: linux-renesas-soc@vger.kernel.org
|
|
This is rather overkill since currently all drivers call this from
hardirq (or at least timers). But maybe in the future we're going to
have thread irq handlers and what not, doesn't hurt to be prepared.
Plus this is an easy start for sprinkling these fence annotations into
shared code.
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: linux-rdma@vger.kernel.org
Cc: amd-gfx@lists.freedesktop.org
Cc: intel-gfx@lists.freedesktop.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
The stuff never really worked, and leads to lots of fun because it
out-of-order frees atomic states. Which upsets KASAN, among other
things.
For async updates we now have a more solid solution with the
->atomic_async_check and ->atomic_async_commit hooks. Support for that
for msm and vc4 landed. nouveau and i915 have their own commit
routines, doing something similar.
For everyone else it's probably better to remove the use-after-free
bug, and encourage folks to use the async support instead. The
affected drivers which register a legacy cursor plane and don't either
use the new async stuff or their own commit routine are: amdgpu,
atmel, mediatek, qxl, rockchip, sti, sun4i, tegra, virtio, and vmwgfx.
Inspired by an amdgpu bug report.
v2: Drop RFC, I think with amdgpu converted over to use
atomic_async_check/commit done in
commit 674e78acae0dfb4beb56132e41cbae5b60f7d662
Author: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Date: Wed Dec 5 14:59:07 2018 -0500
drm/amd/display: Add fast path for cursor plane updates
we don't have any driver anymore where we have userspace expecting
solid legacy cursor support _and_ they are using the atomic helpers in
their fully glory. So we can retire this.
v3: Paper over msm and i915 regression. The complete_all is the only
thing missing afaict.
v4: Fixup i915 fixup ...
v5: Unallocate the crtc->event in msm to avoid hitting a WARN_ON in
dpu_crtc_atomic_flush(). This is a bit a hack, but simplest way to
untangle this all. Thanks to Abhinav Kumar for the debug help.
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Maxime Ripard <maxime@cerno.tech>
References: https://bugzilla.kernel.org/show_bug.cgi?id=199425
References: https://lore.kernel.org/all/20220221134155.125447-9-maxime@cerno.tech/
References: https://bugzilla.kernel.org/show_bug.cgi?id=199425
Cc: Maxime Ripard <maxime@cerno.tech>
Tested-by: Maxime Ripard <maxime@cerno.tech>
Cc: mikita.lipski@amd.com
Cc: Michel Dänzer <michel@daenzer.net>
Cc: harry.wentland@amd.com
Cc: Rob Clark <robdclark@gmail.com>
Cc: "Kazlauskas, Nicholas" <nicholas.kazlauskas@amd.com>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Sean Paul <sean@poorly.run>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
Kinda time to get this sorted. The locking around this really is not
nice.
Thomas mentioned in his review that the only drivers left unconverted
are radeon and amdgpu.
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
Otherwise things might go boom. Not a big chance of that happening
since we don't implement suspend/resume support.
|
|
Somehow this escaped us, this is a KMS ioctl which should only be used
by the master (which is the thing that's also in control of kms
resources). Everything else is bound to result in fail.
Clients shouldn't have a trouble coping with this, since a pile of
drivers don't support vblank waits (or just randomly fall over when
using them). Note that the big motivation for abusing this like mad
seems to be that EGL doesn't have OML_sync, but somehow it didn't
cross anyone's mind that adding OML_sync to EGL would be useful. This
patch is meant to essentially start kicking that can from the back
end.
Update: Kodi maintainers removed this code on 7th August, to be
released in Kodi v18 in Sept 2018.
v2: Drop accidental hunk (Michel).
v3: Also add the new crtc sequence ioctls that have been added
meanwhile ...
Cc: Michel Dänzer <michel@daenzer.net>
Cc: fritsch@kodi.tv
Cc: fernetmenta@kodi.tv
Cc: Rainer Hochecker <fernetmenta@kodi.tv>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
|
|
|
|
|
|
|
|
# Conflicts:
# drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
# drivers/gpu/drm/i915/display/intel_dmc.c
|
|
We used to select between MPLLA/B with the following
state->tx[0] & C20_PHY_USE_MPLLB
Since this is used a few places within C20 PLL setting,
let's introduce a helper function to clean up the code
a bit.
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240105112243.224199-1-mika.kahola@intel.com
|
|
Return an error code without storing it in an intermediate variable.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://patchwork.freedesktop.org/patch/msgid/85f8004e-f0c9-42d9-8c59-30f1b4e0b89e@web.de
Reviewed-by: Luben Tuikov <ltuikov89@gmail.com>
Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
|
|
The kfree() function was called in one case by the
drm_sched_init() function during error handling
even if the passed data structure member contained a null pointer.
This issue was detected by using the Coccinelle software.
Thus adjust a jump target.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://patchwork.freedesktop.org/patch/msgid/85066512-983d-480c-a44d-32405ab1b80e@web.de
Reviewed-by: Luben Tuikov <ltuikov89@gmail.com>
Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
|
|
A failure to load the HuC is occasionally observed where the cause is
believed to be a low GT frequency leading to very long load times.
So a) increase the timeout so that the user still gets a working
system even in the case of slow load. And b) report the frequency
during the load to see if that is the cause of the slow down.
Also update the similar code on the GuC load to not use uncore->gt
when there is a local gt available. The two should match, but no need
for unnecessary de-referencing.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240102222202.310495-1-John.C.Harrison@Intel.com
|
|
Commit 5a028e8f062f ("drm/rockchip: vop2: Add support for rk3588")
introduced a variable which ended up being unused:
rockchip_drm_vop2.c:1688:23: warning: variable ‘if_dclk_rate’ set but not used [-Wunused-but-set-variable]
This has been initially used as part of a formula to compute the clock
dividers, but eventually it has been replaced by static values.
Drop the variable declaration and move its assignment to the comment
block, to serve as documentation of how the constants have been
generated.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240105174007.98054-1-cristian.ciocaltea@collabora.com
|
|
The helper is generic, it doesn't use the opaque EDID type struct drm_edid
and is also used by drivers that only support non-probeable displays such
as fixed panels.
These drivers add a list of modes using drm_mode_probed_add() and then set
a preferred mode using the drm_set_preferred_mode() helper.
It seems more logical to have the helper definition in drm_modes.o instead
of drm_edid.o, since the former contains modes helper while the latter has
helpers to manage the EDID information.
Since both drm_edid.o and drm_modes.o object files are built-in the drm.o
object, there are no functional changes. But besides being a more logical
place for this helper, it could also allow to eventually make drm_edid.o
optional and not included in drm.o if only fixed panels must be supported
in a given system.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240102122208.3103597-1-javierm@redhat.com
|
|
WA 14019877138 needed for Graphics 12.70/71 both
V2(Jani):
- Use drm/i915
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240103053111.763172-1-tejas.upadhyay@intel.com
|
|
Often getting DSB overflows when starting Xorg or Wayland compositors
when running Xe KMD.
Issue was reported but nothing was done, so disabling DSB as whole
until properly fixed in Xe KMD.
v2:
- move check to HAS_DSB(Jani)
v3:
- use IS_ENABLED(I915) check in intel_dsb_prepare()
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/989
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1031
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1072
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240104162411.56085-1-jose.souza@intel.com
|
|
Display code should not care about graphics version. It's only comments
here, but update anyway.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240104174350.823605-5-jani.nikula@intel.com
|
|
Display code should not care about graphics version.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240104174350.823605-4-jani.nikula@intel.com
|
|
Display code should not care about graphics version. While at it,
abstract the version check to a separate macro.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240104174350.823605-3-jani.nikula@intel.com
|
|
Display code should not care about graphics version.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240104174350.823605-2-jani.nikula@intel.com
|
|
Display code should not care about graphics version.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240104174350.823605-1-jani.nikula@intel.com
|
|
intel_wakeref_t is supposed to be a mostly opaque cookie to its
users. It should only be checked for being non-zero and set to
zero. Debug logging its actual value is meaningless. Switch to just
debug logging whether the async_put_wakeref is non-zero.
The issue dates back to much earlier than
commit b49e894c3fd8 ("drm/i915: Replace custom intel runtime_pm tracker
with ref_tracker library"), but this is the one that brought about a
build failure due to the printf format.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20240102111222.2db11208@canb.auug.org.au
Fixes: b49e894c3fd8 ("drm/i915: Replace custom intel runtime_pm tracker with ref_tracker library")
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240104164600.783371-1-jani.nikula@intel.com
|
|
Turns out that one of the ways that Nvidia's driver handles the pre-LT
timeout for eDP panels is by providing a retry timeout in their link
training callbacks that we're expected to wait for. Up until now we didn't
pay any attention to this parameter.
So, start honoring the timeout if link training fails - and retry up to 3
times. The "3 times" bit comes from OpenRM's link training code.
[airlied: this fixes the panel on one of my laptops]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222043308.3090089-12-airlied@gmail.com
|
|
There is a deadlock between the irq and fctx locks,
the irq handling takes irq then fctx lock
the fence signalling takes fctx then irq lock
This splits the fence signalling path so the code that hits
the irq lock is done in a separate work queue.
This seems to fix crashes/hangs when using nouveau gsp with
i915 primary GPU.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222043308.3090089-11-airlied@gmail.com
|
|
Fixes a memory leak seen with kmemleak.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222043308.3090089-10-airlied@gmail.com
|
|
It looks like for some messages the upper layers need to get access to the
results of the message so we can interpret it.
Rework the ctrl push interface to not free things and cleanup properly
whereever it errors out.
Requested-by: Lyude
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222043308.3090089-9-airlied@gmail.com
|
|
This should let the upper layers retry as needed on EAGAIN.
There may be other values we will care about in the future, but
this covers our present needs.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222043308.3090089-8-airlied@gmail.com
|
